Trabajos Construction & Trades en Saint NeotsCrear alertas

My client is the leading design and manufacturing company specialising in power supplies and associated electronics systems for the Defence and Aerospace industries. They are currently looking for an Electronic Assembler to join their team based in St Neots. \n Key responsibilities of the Electronic Assembler job opportunity based in St Neots: \n\n • Assemble mechanical and electrical sub-assemblies\n, • Perform pr...\n\n \n ZIPC1_UKTJ

Groundworkers Required – Immediate Start Little Barford, St Neots £18.00 Per Hour Monday to Friday | Day Shifts\n We are currently seeking 2 experienced Groundworkers to join a major civils project in Little Barford, St Neots. \n This is an excellent opportunity to secure work on a large-scale infrastructure scheme, with the initial phase focused on trench works and underground service detection i... \n \n \n \n\n \n \n ZIPC1_UKTJ

Job Description – Bathroom Fitter (Social Housing) Position: Bathroom Fitter Location: Bedfordshire and Surrounding Areas Employment Type: Permanent, Full-Time Salary: £38,610 per annum Benefits: Company Van and Fuel Card ProvidedAbout the Role Fortus Recruitment are currently recruting for a Bathroom fitter to join a well established Social Housing Contrcator. This is a permanent position offering long-term stability, a competitive salary, and a fully equipped company van with fuel card. The successful candidate will be responsible for carrying out complete bathroom installations and associated works to a high standard while maintaining excellent customer service for residents.Key Responsibilities Complete full bathroom refurbishments within occupied and void social housing properties.Remove existing bathroom suites and prepare areas for installation.Install baths, showers, shower trays, WC's, basins, vanity units, and associated fixtures.Carry out wall and floor tiling, boxing-in, and finishing works.Undertake basic plumbing alterations and repairs as required.Complete minor carpentry works, including fitting bath panels, boxing, and trims.Ensure all work is completed in accordance with company standards, health and safety regulations, and project specifications.Maintain accurate records of work completed using company systems or paperwork.Communicate professionally and courteously with tenants, residents, and colleagues.Keep company vehicle clean, organised, and stocked with required materials and tools.Requirements Essential Proven experience as a Bathroom Fitter within social housing, domestic maintenance, or refurbishment environments.Strong skills in bathroom installation, plumbing, tiling, and basic carpentry.Ability to work independently and manage workload effectively.Good problem-solving skills and attention to detail.Excellent customer service and communication skills.Full UK Driving Licence.Understanding of health and safety requirements within residential properties.Desirable Experience working in occupied social housing properties.Multi-skilled background in additional trades.Asbestos Awareness certification.CSCS Card.What We Offer Permanent employment with a well-established organisation.Competitive salary of £38,610 per annum.Company van provided for business use.Fuel card supplied.Ongoing work across Bedfordshire and surrounding areas.Opportunities for training and career development.Company pension scheme.Paid annual leave.Supportive team environmentIf this role is of interest please call me on 07852 543 549.TPBN1_UKTJ

You're a Mechanical Engineer first and a Design Engineer second. As our Mechanical Design Engineer, you'll work on R&D projects from concept through to completion, not just in the design office but hands-on with production and machinery testing. You don't want to just sit in front of a computer; you want to broaden your horizons in a smaller business where you can make a real difference. Based in Bedford, we develop special purpose converting machinery for a variety of industry sectors. \n BASIC SALARY: up to £41,000 dependent on your relevant experience \n BENEFITS: \n · 23 days holiday plus bank holidays \n · 6% company pension \n LOCATION: Bedford \n COMMUTABLE LOCATIONS: Luton, Biggleswade, Sandy, Hitchin, Ampthill, Flitwick, Woburn, Cranfield, Milton Keynes, Newport Pagnell, St Neots, Huntingdon, Rushden, Wellingborough \n Why should you apply? \n \n · Hands on experienced and supportive engineering team to help you \n · You can work on design projects from start to finish - not just part of them \n · You can be hands on as a mechanical engineer getting involved on the shop floor with production, assembly and machine / factory acceptance testing \n · You can develop your engineering skills to diverse your knowledge of electrical and software too \n JOB DESCRIPTION: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D \n \n Reporting to our Engineering Manager, as our Mechanical Design Engineer you'll be involved from a variety of projects from the get-go. Our projects can range from machinery modifications right through to blank page concept. \n \n Rather than just being confined to a design office, you'll be encouraged to be customer-facing, building on your project experience and working closely with the team on the shop floor in production and test. \n \n Projects will vary from NPD to reengineering solutions, low batch, high volume and next generation innovation. You will need the ability to juggle several projects at different stages, which will challenge you as a Mechanical Design Engineer. Innovation and quality are at the core of what we do here. \n YOUR RESPONSIBILITIES: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D \n \n As our Mechanical Design Engineer, you'll be working on several projects at any one time (2-3), at different stages with different engineering challenges. \n \n Your main duties will include: \n · Detailed mechanical design of new machines from cradle to grave \n · Re-engineer existing machinery to enhance design, manufacturing efficiency, durability, cost down and weight etc \n · Prototype testing \n · Internal stakeholder management with production \n YOUR BACKGROUND: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D \n \n You'll be an experienced Mechanical Design Engineer educated to likely have an HND or B.ENG in Mechanical Engineering. \n \n You will also have experience of some or all the following: \n \n · Working on design projects from concept through to completion \n · Competent using SolidWorks as your primary 3D modeling package \n · Worked closely with production and test (DfMA) \n · BOM's, materials selection to include stainless steel, aluminum and mild steel \n THE COMPANY: \n \n A privately owned, UK manufacturer of special purpose machinery servicing the FMCG sectors. \n \n It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Design, Design Engineer, Mechanical Engineer, Equipment, Tooling, Industrial, Converting, Rewinding, Spooling, Hydraulics, SolidWorks, DfMA, DFMAE, FEA, DFM, DFA \n INTERESTED? Please click apply. You will receive an acknowledgment of your application. \n Please Note: Wallace Hind Selection has been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. \n REF: JAC18626, Wallace Hind Selection

Electrical Assembly and Test Technician \n \n\n • Salary to £40,560 per year (equivalent up to £20.00 per hour)\n, • Overtime paid at time-and-a-half\n, • Permanent Position, Factory-based\n, • Location: in the Cambourne - St. Neots area, Bedfordshire\n, • 39 hours per week, Monday to Friday\n, • 07:30 start with an early finish every Friday (12:00 midday)\n, • Rural / out-of-town location - own transport required\n\n \n A leading manufacturer of bespoke food processing systems is recruiting an Electrical Assembly and Test Technician. \n \n You'll be wiring complete machines, carrying out functional testing/I-O checks, basic fault-finding, and supporting electrical work across the factory. \n \n Key duties \n\n • Machine wiring (sensors, motors, actuators, interconnects)\n, • Read schematics/layout drawings/BOMs\n, • Functional testing + basic fault-finding\n, • Assist with installs, upgrades and improvement projects\n\n \n Essential \n\n • Machine wiring/industrial electrical assembly background\n, • Confident reading drawings and fault diagnosis\n, • Experience with DOL and VFD systems\n, • Good teamwork and attention to quality/safety\n\n \n Desirable \n\n • 18th Edition\n, • PLC/HMI exposure\n, • Installation experience\n\n \n Career Progression \n Development routes available into Controls Engineering (PLC/HMI), Test & Validation, Electrical Design (EPLAN/BOMs/layouts) and Commissioning (UK & international). \n \n Hours & Overtime: \n\n • 39 hours per week, Monday to Friday (early finish Friday)\n, • Overtime generally available and paid at 1.5x (Mon-Fri and Saturday mornings)\n\n \n Pay & Benefits: \n\n • Up to £20.00 per hour (depending on experience)\n, • Annual bonus scheme (company performance related)\n, • 20 days' holiday + bank holidays (rising to 26 with service)\n, • Pension, life assurance, company sick pay, workwear provided\n, • Subsidised vending, staff meals and company events\n\n \n \n \n HRGO Recruitment offers permanent and temporary jobs across the UK. You must have current UK right to work to be considered. We aim to respond to all applications. HRGO is an equal opportunities employer. \n

Ringway, a leader in the Highways Term Maintenance Industry, is responsible for over 50,000 kms of the UK’s highways network. We're dedicated to supporting our clients through a flexible approach and a locally based workforce. We are proud to have been awarded Investors in Diversity and are committed to providing growth opportunities for all employees. \n \n About the Role \n We are looking for an experienced Quantity Surveyor to join our award-winning National Highways contract team \n \n Working closely with the Commercial Manager, you'll be responsible for managing subcontract accounts, preparing valuations and claims, supporting cost control activities, and ensuring the successful commercial delivery of maintenance and response works across the network \n \n Key Responsibilities \n\n • Managing subcontractor accounts proactively, ensuring payment notices are issued on time and final accounts are agreed efficiently.\n, • Preparing and submitting accurate valuations and claims through the client's Confirm system, including all supporting documentation.\n, • Accurately measuring completed works using as-built information and site records in accordance with recognised methods of measurement.\n, • Collaborating with operational teams and supply chain partners to gather evidence, support valuations and resolve client queries.\n, • Identifying and managing commercial risks and opportunities throughout the contract lifecycle.\n, • Supporting and developing Assistant Quantity Surveyors and other members of the commercial team.\n, • Contributing to improved commercial performance, efficiency savings and value generation for all stakeholders\n\n \n Candidate Profile \n\n • A Quantity Surveying or Civil Engineering qualification, or significant relevant industry experience.\n, • At least 4 years' experience within the construction industry.\n, • Proven experience managing valuations, payment applications and variations.\n, • Strong knowledge of standard methods of measurement (experience of MMHW would be advantageous).\n, • Experience in rates build-up, cost control and commercial reporting.\n, • The ability to prepare and analyse CVRs to improve both commercial and operational performance.\n, • Experience working under NEC forms of contract (desirable).\n\n \n We are Investors in People accredited We work hard to create an environment for job satisfaction, where our workforce feel that they are instrumental in contributing to the overall success of the business and on a personal level, can access development towards their professional goals and aspirations. \n \n We have a dedicated recruitment team and politely request that agencies refrain from contacting anyone across our businesses with regards to speculative CV’s or offering to assist with our vacancies, thank you.

DescriptionElectrical Maintenance EngineerSandyShift Pattern - Days / 48 hours per weekSalary - 51,665At Marshalls plc, we believe building tomorrow's world starts with what we can create together today. Keeping our operations running, driving innovation and solving complex challenges is what our En

This role is essential in supporting our electrical projects and ensuring high-quality workmanship.

You're a Mechanical Engineer first and a Design Engineer second. As our Mechanical Design Engineer, you'll work on R&D projects from concept through to completion, not just in the design office but hands-on with production and machinery testing. You don't want to just sit in front of a computer; you want to broaden your horizons in a smaller business where you can make a real difference. Based in Bedford, we develop special purpose converting machinery for a variety of industry sectors. BASIC SALARY: up to £41,000 dependent on your relevant experience BENEFITS: · 23 days holiday plus bank holidays · 6% company pension LOCATION: Bedford COMMUTABLE LOCATIONS: Luton, Biggleswade, Sandy, Hitchin, Ampthill, Flitwick, Woburn, Cranfield, Milton Keynes, Newport Pagnell, St Neots, Huntingdon, Rushden, Wellingborough Why should you apply? · Hands on experienced and supportive engineering team to help you · You can work on design projects from start to finish - not just part of them · You can be hands on as a mechanical engineer getting involved on the shop floor with production, assembly and machine / factory acceptance testing · You can develop your engineering skills to diverse your knowledge of electrical and software too JOB DESCRIPTION: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D Reporting to our Engineering Manager, as our Mechanical Design Engineer you'll be involved from a variety of projects from the get-go. Our projects can range from machinery modifications right through to blank page concept. Rather than just being confined to a design office, you'll be encouraged to be customer-facing, building on your project experience and working closely with the team on the shop floor in production and test. Projects will vary from NPD to reengineering solutions, low batch, high volume and next generation innovation. You will need the ability to juggle several projects at different stages, which will challenge you as a Mechanical Design Engineer. Innovation and quality are at the core of what we do here. YOUR RESPONSIBILITIES: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D As our Mechanical Design Engineer, you'll be working on several projects at any one time (2-3), at different stages with different engineering challenges. Your main duties will include: · Detailed mechanical design of new machines from cradle to grave · Re-engineer existing machinery to enhance design, manufacturing efficiency, durability, cost down and weight etc · Prototype testing · Internal stakeholder management with production YOUR BACKGROUND: Mechanical Engineer, Design Engineer - Machinery, Industrial, R&D You'll be an experienced Mechanical Design Engineer educated to likely have an HND or B.ENG in Mechanical Engineering. You will also have experience of some or all the following: · Working on design projects from concept through to completion · Competent using SolidWorks as your primary 3D modeling package · Worked closely with production and test (DfMA) · BOM's, materials selection to include stainless steel, aluminum and mild steel THE COMPANY: A privately owned, UK manufacturer of special purpose machinery servicing the FMCG sectors. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechanical Design, Design Engineer, Mechanical Engineer, Equipment, Tooling, Industrial, Converting, Rewinding, Spooling, Hydraulics, SolidWorks, DfMA, DFMAE, FEA, DFM, DFA INTERESTED? Please click apply. You will receive an acknowledgment of your application. Please Note: Wallace Hind Selection has been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: JAC18626, Wallace Hind Selection TPBN1_UKTJ

Groundworkers Required – Immediate Start Little Barford, St Neots £18.Per Hour Monday to Friday | Day Shifts\ N.We are currently seeking 2 experienced Groundworkers to join a major civils project in Little Barford, St Neots.

Site Manager - Social Housing Planned Maintenance Based in St. Neots Full time, temporary - around 4 weeks £220 - £270 day rate We are working with a leading Social Housing contractor to recruit a proactive Site Manager to deliver Social Housing refurbishment works in Olney, Buckinghamshire. This role is a temporary position for around 4 weeks. As the Site Manager, you will supervise and manage the contractors undertaking works, ensuring the works are completed in a safe and efficient manner within stated timescales. You will be responsible for management of sub-contractors, inspecting properties pre and post works, taking progress meetings and overseeing the day to day delivery of the programme. We're looking for an established Site Manager who has previously worked as a Site Manager for a main contractor, covering planned maintenance projects in Social Housing properties. You will be able to set up all Health and Safety documentation including RAMS and Construction Phase Plans and have a proven track record in leading sites teams including Assistant Site Managers, RLO's and in-house labour. You will also hold relevant qualifications including: SMSTS Manual Handling First Aid CSCS Card Asbestos Awareness (preferred)You will be working for a modern, forward thinking business; that believes the strengths, skills and personalities of their people are the key to the groups success. For more info, please apply online now

Are you a hands-on maintenance professional with leadership experience and a passion for creating safe, well-maintained environments? Join our team as a Maintenance Lead and play a key role in ensuring the smooth operation of two specialist healthcare services, making a real difference to the experience of patients, staff and visitors every day. Working closely with the Support Services Manager, you will lead and support a maintenance team at St Neots Neurological Centre ensuring a high standard of maintenance is delivered the site. You will oversee day-to-day maintenance activities, prioritise workloads, review work schedules and ensure repairs and maintenance tasks are completed efficiently and effectively. In this varied and rewarding role, you will support the organisation and completion of planned preventative maintenance (PPM) programmes, ensuring all statutory and compliance requirements are met. You will coordinate contractors on site, providing guidance and local support to ensure works are completed safely, on time and to the required standard. You will also identify, prioritise and respond to faults, damage and maintenance issues, ensuring buildings and facilities remain safe, compliant and fit for purpose. As Maintenance Lead, you will be responsible for promoting a strong health and safety culture, ensuring all maintenance activities are carried out in line with organisational policies, procedures and statutory regulations. You will also support administrative processes, including purchase orders, invoice approval and budget monitoring, while contributing to Health & Safety, Clinical Governance and Senior Management Team meetings as required. To be successful in this role, you will need: Previous maintenance experience in a hospital or similar environment. To have a City & Guilds qualification in Electrical, Plumbing or in Building. Can demonstrate good managerial and communication skills. Ability to adapt – be practical. Ability to lift heavy loads and have good physical health. To be conscientious and team focused. Knowledge of statutory legislation e.g. fire, electrical and health & safety. English language skills – verbal and written to GCSE level D or equivalent numerate GCSE level D. Ability to demonstrate initiative and assertiveness. Ability to troubleshoot and resolve problems. To have knowledge of plant within a hospital environment. What You'll Get At Elysium Healthcare, we believe in taking care of the people who care for others, you'll enjoy a comprehensive benefits package designed to support your wellbeing, growth, and future: Annual base salary of £29,948 The equivalent of 33 days annual leave (including bank holidays) – plus your birthday off and the option to buy additional annual leave, in our annual selection window. Career development and training to help you achieve your professional goals Access to our Rewards & Benefits platform Ely-Vate; Your one-stop destination for everyday savings, exclusive benefits, and wellbeing hub! Wellbeing support and activities to help you maintain a healthy work-life balance Access to Blue Light Card, which provides a range of exclusive offers and discounts Life Assurance, for added peace of mind Stream – instant access to earned wages when you need it, plus access to save, directly from your wages, alongside financial wellbeing support. 24/7 GP service and second medical opinion, to ensure you are the best you can be Enhanced Maternity Package, so you can truly enjoy this special time Pension contribution, to help secure your future Free meals and onsite/local free parking Where you will be working: Location Howitts Lane, Eynesbury, St Neots, Cambridgeshire, PE19 2JA Join the team at St Neots Neurological Service providing care, therapeutic and rehabilitation pathways for those affected by a neurological or mental health condition for which challenging behaviour may be the leading impairment. St Neots Neurological Service is located in the centre of town and provides assessment, treatment, rehabilitation and complex care for both males and females suffering from a broad range of neurological conditions, which is provided by a highly experienced team based on site. About us: Elysium Health care has over 8,000 employees and a unique approach to the delivery of care. With a network of over 80 services across England and Wales covering Mental Health, Neurological, Learning Disabilities & Autism, Children & Education, there is opportunity for you to grow and move. Elysium Healthcare is part of Ramsay Health Care with a global network that extends across 10 countries and employs over 86,000 people globally. Elysium Healthcare follows safer recruitment of staff for all appointments and is a Disability Confident employer, committed to inclusive and accessible recruitment. It is a requirement that all staff understand it is each person's individual responsibility to promote and safeguard the welfare of service users. All candidates will be subject to a DBS disclosure TPBN1_UKTJ

Scenic Carpenter St Neots £36,000 - £42,000 About the Role The Scenic Carpenter will be responsible for both crafting and assembling high-quality exhibition stands and scenery for bespoke events across the UK and Europe. Key Responsibilities Manufacturing exhibition stands and bespoke scenic elements in a workshop environment. Assembling and installing exhibition stands at venues. Covering wood with fabrics and vinyls to create premium finishes. Traveling across the UK and Europe to set up and dismantle stands. Collaborating with colleagues to meet deadlines and quality standards. Working from technical design drawings and briefs. Loading and unloading of equipment onto lorries. Essential Skills & Experience Carpentry experience (basic joinery, cutting, and fitting). Experienced in finishing / cover wood with fabric & vinyls and other materials. Prior experience working within the events/exhibitions industry would be highly beneficial Alternatively, a background in shop fitting, kitchen fitting or similar. Comfortable working away from home where required. IPAF or PASMA (preferred) Full UK Driving License. Package Salary between £36K - £42K depending on experience Enhanced rates for weekend work 28 days annual leave International travel Pension How to Apply: Simply click apply or contact Jake Voisey on the details provided. SER-IN

Electronic Assembly Technician Required St.Neots - Immediate Start Available We are currently seeking a skilled electronic technician to work for one of our clients based in St. Neots, the ideal candidate will have experience in electronic assembly and be happy to work across various areas of the business. Key Responsibilities: Assemble electronic components, subassemblies, and systems according to technical specifications and production guidelines. Perform precision soldering and wiring of electronics components Interpret and follow detailed technical schematics, blueprints, and production documents to ensure accurate assembly and testing procedures. Maintain accurate records of production data, and any issues encountered during the assembly and testing processes. Collaborate with production engineers and quality control teams to improve assembly methods and testing procedures. Assist in the calibration, maintenance, and repair of production and test equipment to ensure optimal performance. Follow safety protocols and maintain a clean and organised work environment. Participate in continuous improvement initiatives to enhance production efficiency and product quality.Required Experience: Experience in electronic assembly environment. Strong understanding of electronic circuits, components, and assembly processes. Ability to read and interpret technical schematics and production documents. Excellent attention to detail and a commitment to producing high quality work. Strong problem-solving skills with the ability to troubleshoot and resolve production and testing issues. Ability to communicate technical information clearly, both verbally and in writing and to work collaboratively in a team environment. Ability to work efficiently in a fast-paced production environment with minimal supervision.Additional Info: Working hours: 8.00am-4.30pm Monday to Thursday 8.00am-1.30pm on Fridays Salary: £28k - 30k per year Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

Electrician Required | Industrial | St. Neots, Cambridgeshire Clements Young are currently looking to recruit Electricians to join an industrial project in St. Neots, Cambridgeshire. The work is expected to run until December and will mainly consist of cable glanding and terminating, panel wiring/installation, installing ladder, tray and containment, and installing and terminating armoured cables. You can find further details below. Location: St. Neots, Cambridgeshire Duration: Until December 2026 Hours: Monday: 8:00am–17:00pm Tuesday–Thursday: 7:00am–19:00pm Friday: 7:00am–12:00pm Rate: £28.00 per hour Work Type: Glanding & terminating, panel wiring, containment installation Required: JIB Gold Card, Industrial Background/Experience Start: Monday 17th August 2026 If you are interested in this role, please press "Apply" or phone our office on (phone number removed) for more information. Clements Young Ltd acts as an Employment Business when supplying temporary workers and as an Employment Agency when introducing candidates for permanent employment. We never charge fees to work-seekers. All roles are subject to right-to-work checks, client confirmation, and compliance with the Conduct of Employment Agencies and Employment Businesses Regulations 2003

My client requires a 360 Operator with 14 tonne experience to start on a project commencing on Monday is St Neots for approximately 7 weeks. Previous experience of working on archeological sites is be essential. Please send a CV in the first instance

360 Excavator Operator – St Neots | Ongoing Work | Immediate Start 360 Excavator Operator required for an ongoing commercial project in St Neots. Anglian Recruitment is currently recruiting for an experienced 360 Excavator Operator to join a busy site on a long-term project with an immediate start available. The Role • Operating a 360 Excavator safely and efficiently, • Carrying out excavation, grading and trenching works, • Working alongside groundworkers and site management, • Daily machine checks and ensuring safe operation, • Adhering to all site health and safety procedures Requirements • Valid CPCS or NPORS 360 Excavator Operator qualification, • Safety Critical Medical (essential), • Previous experience operating 360 excavators on commercial construction sites, • Full PPE, • Reliable, hardworking and able to work as part of a team What's on Offer? • Ongoing work, • Competitive hourly rate, • Weekly pay, • Immediate start, • Opportunity to work with a well-established contractor If you're an experienced 360 Excavator Operator with a valid Safety Critical Medical and are available for work in St Neots, we'd love to hear from you. Apply today or contact Anglian Recruitment for more information

Concrete Finishers x6 – St Neots Location: St Neots, PE19 Rate: £20.85 per hour – CIS Weekend Rate: Time and a quarter Hours: 07:00 – 19:00 Duration: Approximately 6 months Positions: 6 Tradestech are currently looking for 6 experienced Concrete Finishers for a long-term project in St Neots, PE19. The work is expected to run for approximately 6 months, with 12-hour shifts from 07:00 to 19:00. Weekend work will be required every other weekend, paid at time and a quarter. Duties will include: Concrete finishing Pouring, levelling and finishing concrete Using hand and power tools to achieve the required finish Floating and trowelling concrete General concrete and associated site works Working safely as part of the site team Requirements: Blue CSCS Card – Essential Previous concrete finishing experience Able to demonstrate experience working on similar construction/civils projects Reliable and able to commit to the duration of the project Able to work 07:00 – 19:00 shifts and alternate weekends What's on offer: £20.85 per hour CIS Time and a quarter for weekend work 07:00 – 19:00 working hours Weekend work every other weekend Approximately 6 months work 6 positions available Please note: No accommodation or digs are provided, so applicants must be able to travel to St Neots, PE19 To apply or for more information, contact Dan on (phone number removed)

Gold Card Electrician – Cambourne Pay: £26.00 per hour (first 8.5 hours), rising to £34.58 any overtime and weekend work Hours: 8am – 5pm (8.5 hours paid) with optional overtime available Location: Cambourne Contract: Temporary – initially 4 weeks, with strong potential for extension for the right candidate Our client, a well-established electrical contractor, is looking for a reliable Gold Card Electrician to join their team on an exciting warehouse refurbishment project in Cambourne. This is a great opportunity to secure immediate, well-paid work with the chance of ongoing employment beyond the initial contract. What's on Offer £26.00 per hour for your first 8.5 hours each day Optional overtime available for those wanting to boost their earnings paid at £34.58 per hour Initial 4-week contract with genuine opportunity for extension Steady, full-time hours on a well-organised site The Role Carrying out electrical works as part of a warehouse refurbishment project Working alongside a professional and experienced team What You'll Need A valid Gold Card IPAF certification is preferred but not essential Your own tools and PPE How to Apply If you're a qualified electrician ready to start earning straight away, we want to hear from you. Apply now or contact Select Recruitment today to secure your place on this role

360 Excavator Driver – St Neots Location: St Neots, PE19 Rate: £25.02 per hour – CIS Weekend Rate: Time and a quarter Hours: 07:00 – 19:00 Duration: Approximately 6 months Tradestech are currently looking for an experienced 360 Excavator Driver for a long-term project in St Neots, PE19. The work is expected to run for approximately 6 months, with 12-hour shifts from 07:00 to 19:00. Weekend work will be required every other weekend, paid at time and a quarter. Duties will include: Operating a 360 excavator safely and efficiently Excavation and muck shifting Working around groundworkers and site operatives General earthworks and civils duties Carrying out daily plant checks Following site safety procedures at all times Requirements: Valid CPCS or NPORS 360 Excavator ticket NPORS must have the CSCS logo Valid Safety Critical Medical – Essential Reliable and able to commit to the duration of the project Able to work 07:00 – 19:00 shifts and alternate weekends What's on offer: £25.02 per hour CIS Time and a quarter for weekend work 07:00 – 19:00 working hours Weekend work every other weekend Approximately 6 months work Please note: No accommodation or digs are provided, so applicants must be able to travel to St Neots, PE19 To apply or for more information, contact Dan on (phone number removed)

Security Operatives x5 – Night Shifts Location: St Neots area – working across 5 separate locations Start Date: 07/09/2026 Duration: Approximately 2 months Hours: 22:00 – 06:00, night shifts Rate: £20.00 per hour – Umbrella PAYE Tradestech are currently looking for 5 experienced Security Operatives for night-shift work across five separate locations in the St Neots area. The work is due to start on 7th September 2026 and is expected to run for approximately 2 months. Duties will include: Site security and access control Monitoring site entrances and exits Carrying out regular site patrols Ensuring site rules and security procedures are followed Reporting any incidents or suspicious activity General security duties as required Requirements: Valid SIA Licence / Accreditation – Essential Previous security experience CSCS Card – Desirable but not essential Reliable and punctual Able to work night shifts from 22:00 – 06:00 Able to travel to sites around the St Neots area What's on offer: £22.00 per hour – Umbrella PAYE Night shifts – 22:00 to 06:00 Approximately 2 months work Start date 07/09/2026 5 positions available To apply or for more information, contact Dan on (phone number removed)

Tradeline Recruitment require a CPCS / NPORS Telescopic Forklift Operator for an immediate start in St Neots. £20 - £21/Hour. 1 weeks work. Valid CPCS / NPORS Card required. Previous experience required. References required. For more information please contact Callum on (phone number removed)

Job Description – Bathroom Fitter (Social Housing) Position: Bathroom Fitter Location: Bedfordshire and Surrounding Areas Employment Type: Permanent, Full-Time Salary: £38,610 per annum Benefits: Company Van and Fuel Card Provided About the Role Fortus Recruitment are currently recruting for a Bathroom fitter to join a well established Social Housing Contrcator. This is a permanent position offering long-term stability, a competitive salary, and a fully equipped company van with fuel card. The successful candidate will be responsible for carrying out complete bathroom installations and associated works to a high standard while maintaining excellent customer service for residents. Key Responsibilities Complete full bathroom refurbishments within occupied and void social housing properties. Remove existing bathroom suites and prepare areas for installation. Install baths, showers, shower trays, WC's, basins, vanity units, and associated fixtures. Carry out wall and floor tiling, boxing-in, and finishing works. Undertake basic plumbing alterations and repairs as required. Complete minor carpentry works, including fitting bath panels, boxing, and trims. Ensure all work is completed in accordance with company standards, health and safety regulations, and project specifications. Maintain accurate records of work completed using company systems or paperwork. Communicate professionally and courteously with tenants, residents, and colleagues. Keep company vehicle clean, organised, and stocked with required materials and tools. Requirements Essential Proven experience as a Bathroom Fitter within social housing, domestic maintenance, or refurbishment environments. Strong skills in bathroom installation, plumbing, tiling, and basic carpentry. Ability to work independently and manage workload effectively. Good problem-solving skills and attention to detail. Excellent customer service and communication skills. Full UK Driving Licence. Understanding of health and safety requirements within residential properties. Desirable Experience working in occupied social housing properties. Multi-skilled background in additional trades. Asbestos Awareness certification. CSCS Card. What We Offer Permanent employment with a well-established organisation. Competitive salary of £38,610 per annum. Company van provided for business use. Fuel card supplied. Ongoing work across Bedfordshire and surrounding areas. Opportunities for training and career development. Company pension scheme. Paid annual leave. Supportive team environment If this role is of interest please call me on (phone number removed)

Job title: Multi Trade Operative Location: Bedfordshire Job Type: Permanent Salary: £37,440 per annum with a van and fuel card supplied We are currently recruiting for an experienced Multi Trade Operative to join a well-established social housing contractor on a permanent basis. This is an excellent opportunity to secure a long-term position with a reputable company that offers a competitive salary and a great benefits package. Working across occupied social housing properties throughout Bedfordshire, you will be responsible for carrying out a wide range of planned and reactive maintenance works while delivering a high standard of workmanship and excellent customer service. Key Responsibilities Carry out carpentry repairs Carry out plumbing repairs Undertake painting and decorating works. Patch plastering Basic tiling Ensure all work is completed to a high standard and within agreed timescales. Maintain a safe working environment and adhere to all health and safety regulations. Communicate professionally with tenants and colleagues while providing excellent customer service. Complete relevant job documentation accurately. Requirements Previous experience working as a Multi Trade Operative within social housing, property maintenance, or a similar environment. Competent across a range of trade disciplines, particularly carpentry, plumbing, decorating, and basic brickwork. Experience working in occupied properties. Full UK driving licence. Ability to work independently and manage your own workload. Strong problem-solving skills and attention to detail. A positive and professional approach to customer service. Benefits Salary of £37,440 per annum. Company van provided. Fuel card supplied. Paid annual leave. Company pension scheme. Permanent, full-time employment. Opportunity to join a supportive and growing contractor with long-term career prospects

Electronic Assembly Technician Required St.Neots - Immediate Start Available We are currently seeking a skilled electronic technician to work for one of our clients based in St. Ives, the ideal candidate will have experience in electronic assembly and be happy to work across various areas of the business. Key Responsibilities: Assemble electronic components, subassemblies, and systems according to technical specifications and production guidelines. Perform precision soldering and wiring of electronics components Interpret and follow detailed technical schematics, blueprints, and production documents to ensure accurate assembly and testing procedures. Maintain accurate records of production data, and any issues encountered during the assembly and testing processes. Collaborate with production engineers and quality control teams to improve assembly methods and testing procedures. Assist in the calibration, maintenance, and repair of production and test equipment to ensure optimal performance. Follow safety protocols and maintain a clean and organised work environment. Participate in continuous improvement initiatives to enhance production efficiency and product quality.Required Experience: Experience in electronic assembly environment. Strong understanding of electronic circuits, components, and assembly processes. Ability to read and interpret technical schematics and production documents. Excellent attention to detail and a commitment to producing high quality work. Strong problem-solving skills with the ability to troubleshoot and resolve production and testing issues. Ability to communicate technical information clearly, both verbally and in writing and to work collaboratively in a team environment. Ability to work efficiently in a fast-paced production environment with minimal supervision.Additional Info: Working hours: 8.00am-4.30pm Monday to Thursday 8.00am-1.30pm on Fridays Salary: £28k - 30k per year Proactive Global is committed to equality in the workplace and is an equal opportunity employer. Proactive Global is acting as an Employment Business in relation to this vacancy

MULTI‑SKILLED GROUNDWORKERS + 360 OPERATORS – PE19 0BF Start 20/8/26 | Long‑term (1–1.5 years) Hours: 7:30–17:00 | Weekends available Role: Multi‑skilled Groundworkers and 360 Operators for civils works: deep drainage, concreting, kerbing/edging, footings, slabbing/paving. Pay: Groundworker: £23ph 360 Operator: £24ph Requirements: X2 Gang – Multi‑Skilled Groundworkers Strong drainage experience CSCS CPCS / NPORS All‑round civils experience Reliable, long‑term commitment Works Include: Deep Drainage Concreting Kerbing & Edging Footings Slabbing & Paving General Civils Groundworks Location: PE19 – Long‑term civils project Apply: Call/text (phone number removed)

TIG Welder / Fabricator Full-Time, Permanent Location: Sandy / Cambourne / St Neots / Huntingdon area Salary: Up to £20.00 per hour (DOE) Overtime: Paid at 1.5x (weekdays & Saturday mornings) Transport: Due to rural location, own transport is essential We're seeking an experienced TIG Welder / Fabricator to work on stainless steel (1-12mm). You'll fabricate and weld high‑quality components from engineering drawings while maintaining excellent standards of safety and accuracy. Key Duties: TIG welding & fabrication on stainless steel (incl. pipework/purge) Working from engineering drawings & tolerances High‑quality workmanship and safe working practices Supporting production and occasional on‑site work Requirements: TIG welding experience with stainless steel Ability to read engineering drawings Relevant qualification or apprenticeship preferred Reliable, safety‑focused, team‑oriented Working Hours: (39/wk): Mon 7:30am-4:00pm, Tue 7:30am-4:30pm, Wed-Thu 7:30am-5:00pm, Fri 7:30am-12:00 mid-day (OT available). Benefits: Bonus, holiday + BH, pension, life assurance, sick pay, free workwear, subsidised snacks/drinks, staff events. Apply now to join a respected, long‑established engineering manufacturer. HRGO Recruitment provides both permanent and temporary job opportunities across the UK. Applicants must have the right to work in the UK. HRGO is committed to equal opportunities for all

My client are on the lookout for a highly skilled bench joiner to join the team, You will be expected to produce high quality joinery. As a Bench Joiner, you will play a crucial role in the production of high-quality joinery. You will be responsible for operating a range of machinery and hand tools to construct and assemble a variety of products, ensuring they meet the required specifications and quality standards. Responsibilities • Interpret technical drawings, plans, and specific instructions to manufacture joinery and staircases, • Measure, cut, shape, and fit wood and other materials to construct furniture pieces, such as cabinets, desks, and shelves, • Use a range of machinery and hand tools, including saws, drills, planers, and sanders, to work on different construction projects, • Apply appropriate finishes, such as stains, varnishes, or paints, to enhance the appearance and protect the surfaces of the joinery and furniture, • Collaborate with other team members, such as designers and project managers, to ensure the timely completion of projects, • Inspect and test finished products for quality and accuracy, making any necessary adjustments or repairs, • Maintain and clean equipment, ensuring it is in proper working order and safe to use

The Successful Applicant A successful Procurement Business Partner should have:Proven experience in supply chain or procurement within the construction, manufacturing or public sector industryMust have knowledge of NEC and JCT construction contractsUnderstanding of procurement strategies, processes

This is your opportunity to break away from the grind of construction and step into the fast-growing world of construction SaaS. Construction !About the jobContractors bleed margin on every project. Act as the commercial voice inside Shape, shaping product development to better match the realities o

Company DescriptionAt Turner & Townsend we’re passionate about making the difference.That means delivering better outcomes for our clients, helping our people to realise their potential, and doing our part to create a prosperous society.Every day we help our major global clients deliver ambitious

Project Director - Data Centre Construction | FrankfurtA leading international construction consultancy is expanding its German operations and seeking an experienced Project Director to lead hyperscale data centre delivery from our Frankfurt office. The role:Lead the delivery of multiple data centre

Track progress against the construction schedule, reporting performance, constraints, risks and recovery actions to Project Engineer / Construction Manager. Job Title Site Construction Supervisor - Electrical Location: Port Talbot (site-based) Reports to: Project Engineer / Construction Manager S

You’ll ideally have:Experience working with digital construction platforms such as Autodesk Construction Cloud, Viewpoint for Projects, FieldView, Common Data Environments (CDEs) or similar. As client digital and information management requirements continue to evolve, you’ll ensure projects cons

This is your opportunity to break away from the grind of construction and step into the fast-growing world of construction SaaS. Act as the commercial voice inside Shape, shaping product development to better match the realities of construction projects. Your Capabilities - Significant experience a

Minimum Qualifications:Suitable academic qualifications in a relevant Engineering discipline or appropriate level of field construction experience or equivalent combination of qualifications and experienceVocational Qualification such as NVQ Level 6 in Construction Management an advantageSSSTS/SMSTS

Degree-qualified in Engineering, Construction Management, Project Management, or a related discipline, with relevant professional accreditation being advantageousStrong proficiency in Primavera P6 or similar planning software. We're looking for a Construction Planner to join our growing Project Cont

And enable the achievement of our vision through our two missions:- To fully digitalise the construction of human civilisation - To create a new type of organisation that enables human flourishing while delivering a huge positive impact on society

Education/Qualifications:A minimum of 4 years’ industry experience gained within BIM, Built Environment, Construction or similar industry sectorExpertise across ISO 19650, Building Information Modelling (BIM) FrameworkExperience with PAS 2080 Carbon Management in Infrastructure would be desirableP

Develop and implement construction execution strategies, methodologies, constructability reviews, and construction readiness plans. Typically, minimum qualified to ISCED Level 5 (technical diploma) or equivalent combination of qualifications and experienceVocational Qualification such as NVQ Level 6

Reviewing, advising upon and amending more general construction and commercial agreements including sub-contracts, purchase orders, letters of intent, pre-construction agreements, MOUs, deeds of variation, novation agreements, NDAs, JV agreements, wayleave agreements, easements, licences, leases, da

Bouygues Travaux Publics, part of Bouygues Construction SA, is recruiting a Senior Estimator for the Marine and Tunnelling team to lead robust estimates for Sizewell C.

Cotech Building Careers is seeking a seasoned Pre-Construction Lead for a major London contractor delivering high-spec commercial, residential and civic projects. You will guide bids, set strategies, and ensure governance aligns with sales targets while leading a multi-disciplinary preconstruction t

Potensis seeks a Head of Construction to lead operational delivery for a portfolio of around a dozen live residential developments across the Essex patch.

The Labour Group in Central London is seeking an experienced M&E Pre-Construction Director to lead the pre-construction function across residential, mixed-use and commercial sectors. Based in a Central London office, you will manage multiple tenders and ensure commercially viable, technically robust

You will oversee complex change initiatives in Property Construction, mentor teams, and collaborate with leadership for effective project delivery.

Leading Legal 500, Chambers & Spears Ranked Law Firm in City of London seeks a Construction Associate (1–5 PQE) to grow within a premier team.

To manage the site operation of projects typically ranging in value from £100k to £2.Reporting to the commercial Director.The day-to-day running of the site ensuring all procedures and processes are carried out in a safe and cost-efficient manner.Co-ordinating subcontractors and suppliers.Carrying