Offres contract maintenance engineering à FarnworthCréer des alertes d'emploi

Senior EC&I Engineer Location: Bolton Salary: DEO £60,000.00 + Employment Type: Full-Time Permanent or Contract Overview We are seeking an experienced Senior EC&I Engineer to support a key client in Bolton, specialising in the design, installation, maintenance, and troubleshooting of automated door and access systems. This is a technically focused role acting as a central point for Electrical, Control & Instrumentation (EC&I) activities. You will work on a diverse range of systems—from pedestrian automatic doors to large industrial and safety-critical doorsets within nuclear, defence, transport, and other high-hazard environments. Key Responsibilities Technical & Design • Lead EC&I design activities across automated door and access control systems, • Design and develop:, • Wiring schematics, • Control panels and assemblies, • Cable schedules, • Produce detailed EC&I drawings, calculations, and technical documentation, • Ensure systems comply with required Performance Levels (PL) or SIL ratings, • Use SISTEMA to analyse and verify safety-related control systems (SRP/CS) Project & Site Delivery • Conduct site visits to assess existing installations and define modification requirements, • Support installation, commissioning, and ongoing maintenance activities, • Provide fault diagnosis and troubleshooting support to site teams, • Assist with Functional Design Specifications (FDS) and project scoping Collaboration & Stakeholder Management • Act as a focal point between:, • Mechanical Engineers, • Project teams, • Subcontractors, • External stakeholders and clients, • Support multi-disciplinary integration across departments, • Liaise with internal and external customers to ensure successful project delivery Compliance & Quality Assurance • Ensure compliance with:, • Machinery Directive, • UK Supply of Machinery (Safety) Regulations, • Relevant British and ISO standards, • Review, check, and technically verify EC&I drawings and documentation, • Carry out approval responsibilities in line with company processes, • Contribute to Non-Conformance Reports (NCRs), including raising and resolving issues General Responsibilities • Maintain flexibility to support project deadlines, including overtime where required, • Undertake additional duties appropriate to the role and seniority level Essential Requirements • Qualification in Electrical Engineering or related discipline, • (NVQ Level 3, HNC/HND, or equivalent), • Proven experience with:, • Automated doors, access systems, or similar electro-mechanical systems, • Strong understanding of:, • Electrical systems and control circuits, • Fault-finding and diagnostics, • Experience interpreting electrical schematics and drawings, • Ability to independently design compliant EC&I systems Technical Knowledge • Familiarity with relevant standards, including:, • BS EN 16005 (Pedestrian Doors), • BS EN 12453, • BS EN ISO 13849-1 & 13849-2, • BS EN 60204, • BS 7671, • Experience producing EC&I documentation, reports, and specifications, • Experience performing engineering calculations (manual and software-based), • Competence with AutoCAD 2D and/or Inventor 3D, • Understanding of:, • Motors, gearboxes, clutch/brake systems, • Sensors and safety devices, • Variable Speed Drives (VSDs), • PLCs and programmable safety systems Desirable Skills & Experience • Experience with:, • Roller shutters, sectional doors, industrial sliding doors, or powered access systems, • Experience in safety-critical sectors (nuclear, defence, heavy industry), • Knowledge of:, • Safety PLCs, • Interlock systems, • Emergency release mechanisms, • VFDs, • Experience using SISTEMA for PL calculations, • ECS/CSCS card, • Security Clearance (SC) or eligibility to obtain

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract. The department are looking for someone with the following skills and experience: • Experienced Project Officer / Project Coordinator / Project Support, • Excel Essentials - demonstrable use of lookup and conditional based formulas, conditional formatting, pivot tables, • Power Query and Power BI report maintenance experience desirable, • SAP materials management system., • Primavera 6 planning tool is preferred but not essential., • Certification in Project Management, would be an advantage., • At least 3 years of project support experience, ideally in an engineering or manufacturing environment., • Supporting the Project Manager’s and Project Team’s in the co-ordination, planning and control of projects., • Proficiency in Microsoft Office applications, such as Word, Excel, Outlook, PowerPoint, MS Project and Visio.Rate: £30.00 per hourLocation: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsiteContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella) Project Officer Job Description:This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project Officer support the Heads of Manufacturing and Production Project Managers across multiple projects and sites as required, providing delivery of the following:, • Maintenance and regular reporting of project Key Performance Indicators., • Act as an interface within Manufacturing to help ensure programme delivery, quality and cost., • Provide, understand and present information at internal reviews and meetings., • Assist the team with Risk and Opportunity management., • Assist in the compilation of Manufacturing estimates and Cost at Completions., • Assist in the compilation and analysis of workload forecast., • Compilation and maintenance of project programmes and schedules., • Maintain and improve the interface with internal customers and external departments.Role requirements (skills, training and qualifications):, • Enthusiastic, pro-active and tenacious individual who can prioritise as well as manage day-to-day tactical decisions., • A clear, strong and effective communicator., • Numerate and confident with basic mathematics, • Knowledgeable and experienced in the basic application of Project Management skills at an assistant level., • Computer literacy - basic but proven skills required in MS Word, spread sheets, presentations and planning tools. Experience with SAP materials management system / alternative Materials Management systemPrimavera 6 planning tool is preferred but not essential. Other PM tools would be acceptable, • Local, job specific training will be provided as appropriate.

Senior EC&I Engineer Location: Bolton Salary: DEO £60,000.00 +Employment Type: Full-Time Permanent or Contract Overview We are seeking an experienced Senior EC&I Engineer to support a key client in Bolton, specialising in the design, installation, maintenance, and troubleshooting of automated door and access systems. This is a technically focused role acting as a central point for Electrical, Control & Instrumentation (EC&I) activities. You will work on a diverse range of systems-from pedestrian automatic doors to large industrial and safety-critical doorsets within nuclear, defence, transport, and other high-hazard environments. Key ResponsibilitiesTechnical & Design • Lead EC&I design activities across automated door and access control systems, • Design and develop:, • Wiring schematics, • Control panels and assemblies, • Cable schedules, • Produce detailed EC&I drawings, calculations, and technical documentation, • Ensure systems comply with required Performance Levels (PL) or SIL ratings, • Use SISTEMA to analyse and verify safety-related control systems (SRP/CS)Project & Site Delivery, • Conduct site visits to assess existing installations and define modification requirements, • Support installation, commissioning, and ongoing maintenance activities, • Provide fault diagnosis and troubleshooting support to site teams, • Assist with Functional Design Specifications (FDS) and project scopingCollaboration & Stakeholder Management, • Act as a focal point between:, • Mechanical Engineers, • Project teams, • Subcontractors, • External stakeholders and clients, • Support multi-disciplinary integration across departments, • Liaise with internal and external customers to ensure successful project deliveryCompliance & Quality Assurance, • Ensure compliance with:, • Machinery Directive, • UK Supply of Machinery (Safety) Regulations, • Relevant British and ISO standards, • Review, check, and technically verify EC&I drawings and documentation, • Carry out approval responsibilities in line with company processes, • Contribute to Non-Conformance Reports (NCRs), including raising and resolving issuesGeneral Responsibilities, • Maintain flexibility to support project deadlines, including overtime where required, • Undertake additional duties appropriate to the role and seniority levelEssential Requirements, • Qualification in Electrical Engineering or related discipline(NVQ Level 3, HNC/HND, or equivalent), • Proven experience with:, • Automated doors, access systems, or similar electro-mechanical systems, • Strong understanding of:, • Electrical systems and control circuits, • Fault-finding and diagnostics, • Experience interpreting electrical schematics and drawings, • Ability to independently design compliant EC&I systemsTechnical Knowledge, • Familiarity with relevant standards, including:, • BS EN 16005 (Pedestrian Doors), • BS EN 12453, • BS EN ISO 13849-1 & 13849-2, • BS EN 60204, • BS 7671, • Experience producing EC&I documentation, reports, and specifications, • Experience performing engineering calculations (manual and software-based), • Competence with AutoCAD 2D and/or Inventor 3D, • Understanding of:, • Motors, gearboxes, clutch/brake systems, • Sensors and safety devices, • Variable Speed Drives (VSDs), • PLCs and programmable safety systemsDesirable Skills & Experience, • Experience with:, • Roller shutters, sectional doors, industrial sliding doors, or powered access systems, • Experience in safety-critical sectors (nuclear, defence, heavy industry), • Knowledge of:, • Safety PLCs, • Interlock systems, • Emergency release mechanisms, • VFDs, • Experience using SISTEMA for PL calculations, • ECS/CSCS card, • Security Clearance (SC) or eligibility to obtain Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission.

Shift Engineer (Temp to Perm)\nLocation: Westhoughton – BL5\n Salary: £42,500 + Benefits\n Shift Pattern: Days | 39 hours per week\n Contract: Temporary to Permanent\nWe are looking for an experienced Shift Engineer to join a fast-paced manufacturing environment, supporting production through effective maintenance, fault finding, and continuous improvement of site machinery and equipment.\nThis is an excellent opportunity for a multi-skilled engineer looking for long-term stability, development, and the opportunity to secure a permanent position within a well-established business.\nThe Role\nAs a Shift Engineer, you will play a key role in ensuring machinery and production equipment operates safely, efficiently, and with minimal downtime. Working closely with production teams, you will be responsible for both planned and reactive maintenance across the site.\nKey Responsibilities\n\n - Carry out planned preventative maintenance (PPM) on production machinery and site equipment\n - Respond quickly and effectively to machinery breakdowns to minimise downtime\n - Diagnose and repair both mechanical and electrical faults\n - Support continuous improvement projects to improve equipment reliability and production efficiency\n - Work closely with operations teams to identify and resolve recurring issues\n - Ensure all maintenance activities are completed safely and documented accurately\n - Assist with machinery installations, upgrades, and improvement works when required\n\nAbout You\nTo be successful in this role, you will have:\n\n - Proven experience working as a multi-skilled maintenance or shift engineer within a manufacturing or production environment\n - Strong mechanical and electrical maintenance skills\n - Food industry experience\n - Excellent fault-finding and troubleshooting ability\n - The ability to work independently and make sound engineering decisions under pressure\n - A proactive mindset with a focus on reliability, safety, and continuous improvement\n\nHighly Desirable Experience\nExperience using any of the following systems would be highly advantageous:\n\n - Shire\n - Piranha\n - Frontline\n\nWhat’s on Offer\n\n - £42,500 salary\n - 39-hour day shift pattern\n - Temporary to permanent opportunity\n - 25 days annual leave + bank holidays\n - Christmas shutdown\n - Regular overtime available for a minimum of 10 weeks per year, paid at time and a half\n - Full onboarding, training, and ongoing engineering support\n - Opportunity to join a supportive team with long-term career prospects\n\nThis is a fantastic opportunity for an engineer who enjoys hands-on problem solving, working with modern production equipment, and being part of a business that invests in its people and engineering function.

Our client has an opportunity for a Technical Administrator to join them on a contract basis in Bolton for 12 months. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Role: Technical Administrator Location: Bolton, fully onsite Hours: 37 per week Clearance: BPSS required before starting, full SC to follow Hourly Rate: £22.17-£24.19 per hour via Umbrella, inside IR35 What you'll be doing: Providing technical administration support to the ESS & Mechanical Team to ensure programmes are met to agreed time, cost and quality requirements. Managing Spares. From COTS (commercial off the shelf) down to components e.g. IC's, connector savers & service kits. Creation of calibration and service kits and their redeployment back into our stock holding. Creation of material master's with our SAP management system. Working with engineers to ascertain min / max quantity levels. Organisation of current stock and regular stock taking. Ordering of new stock. Using Jira to notify people of where items are up to. Assisting the Control Team Lead in the management of critical spares. Liaising with relevant Engineering function to determine their requirements Deploying critical spares packages and managing calibration requirements to minimise downtime to production. Providing SAP training and producing...

Technical Administrator – Calibration & Maintenance (Strong SAP Experience Required) Location: Bolton Contract: 12 Month Contract Rate: £16.50 – £18.00 per hour Morson are recruiting on behalf of a leading Aerospace & Defence organisation for a Technical Administrator to join the Calibration & Maintenance Team at their advanced manufacturing facility in Bolton. This opportunity would suit an experienced technical administrator or maintenance coordinator with strong SAP experience, ideally gained within engineering, manufacturing, aerospace, defence, automotive, or other highly regulated industrial environments. Working within the Calibration & Maintenance department, you will join a specialist Control Team responsible for coordinating calibration, servicing, and maintenance activities across critical production and test equipment. A key focus of the role will be the effective use of the SAP ERP system to manage maintenance activities, calibration records, purchase requisitions, equipment servicing data, and engineering documentation, ensuri...

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. This role does require someone who has lots of experience of using SAP. Hourly Rate: £24.19ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Technical Administrator Job Description: We are seeking a technical admin to join the Calibration & Maintenance team at our Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities. Key areas of resp...

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. Hourly Rate: £24.19ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Technical Administrator Job Description: We are seeking a technical admin to join the Calibration & Maintenance team at our Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities. Key areas of responsibility are as follows: • Managing Spares., • ...

Company description: At Warburtons, family is at the heart of our business. Five generations'? worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Job description: Role: Technical Coordinator Location: Bolton Contract: Permanent Salary: Competitive A re you a meticulous problem-solver with a passion for baking and an eye for technical detail? The Recipe Warburtons are seeking a highly organised and proactive Technical Coordinator to join our team and ensure the smooth, efficient production of our quality baked products. If you thrive in a fast-paced environment and enjoy bridging the gap between baking artistry and technical precision, we want to hear from you! Your strategic thinking and operational expertise will help us maintain the highest standards in ensuring the freshest products are delivered on time and in full to our customers. The Role As a Technical Coordinator, you will report to the Site Technical Manager, and play a crucial role in maintaining and driving product quality standards, improving our production processes, ensuring adherence to food safety standards and optimising efficiency. You will be the go-to person for technical troubleshooting and will work closely with our Compliance, Production and Engineering teams. You'll support the Technical Manager to maintain food safety, hygiene and quality standards.Ensure site compliance across bakery and depots through data, audits and systems, and act as site quality lead when the Technical Manager is absent. Quality Control: You will Implement and maintain robust quality control procedures, conducting regular process audits to ensure consistent product quality and adherence to specifications. Product Assessment: Testing products in our small laboratory,you will monitor quality parameters and identify any areas outside of our specification. You will also collate samples for external testing and sampling. Bakery Trials: Working closely with our Centre Technical Team, you will co-ordinate site bakery trials for existing or new ingredients, packaging and products. Document management: You will be a site expert on document management ensuring all our process specifications are accurate and up to date. With the manufacturing teams you will ensure maintenance of accurate production process records and quality control checks, generating regular reports on quality performance and Key KPis. Equipment Calibration: You will manage our internal calibration schedule, liasing with both internal and external engineers to ensure the accuracy of our quality & food Safety monitoring equipment. Training & Support: You will provide technical support and training to bakery staff on production processes and quality. Food Safety: You will be part of the HACCP & QMS Internal Audit teams, and provide support to the site food safety team, to ensure to all relevant food safety regulations and standards are maintained. You will be an integral part of the team ensuring we maintain our BRC accreditation and other external audits. Problem Solving: In conjunction with the manufacturing teams you will analyse production processes, utilise our data capture monitoring systems, be involved in root cause problem solving sessions, identify areas for improvement and implement solutions to optimise quality, efficiency and reduce waste. Essential Ingredients Experience of working in a fast-paced environment with Food Safety or quality control experience. Excellent IT skills including experience of working with various IT systems, Excel and spreadsheets. Strong team working ethic. Self-motivated with the ability to work independently and as part of a wider site function. Good relationship builder- collaborative in approach, establishing credible, trusted relationships with both internal and external contacts at all levels. Good communication skills, both written and verbal. Strong balanced judgement and use a pragmatic common-sense approach. Attention to detail and high, consistent levels of accuracy. Prioritising and Organisation - Ability to plan, organise and monitor a diverse workload. Quality data & KPIs: Collate, trend and report QMS data to drive decisions. Product quality reviews: Routine assessments, benchmarking and corrective actions. Trials & improvements: Coordinate trials, analyse results, document outcomes. Audits & compliance: Conduct internal audits and close corrective actions. Training & culture: Champion quality through coaching and clear communication. Desirable Skills & Experience: Relevant qualifications in food science, or a related field. Experience working with NPD, ingredients and carrying out product trials Experience with bakery equipment and processes. Experience working with digital data capture, optical vision systems and document management systems. Knowledge of lean manufacturing principles. Proven experience in a technical coordination or quality control role within a food production environment (bakery experience preferred). Strong understanding of food safety regulations and HACCP principles. Excellent problem-solving and analytical skills. Strong organisational and time management skills. Ability to work independently and as part of a team. Excellent communication and interpersonal skills. Technical aptitude and ability to understand and troubleshoot machinery leading to issues with product quality. Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do. TPBN1_UKTJ

World Class Defence Organisation based in Bolton is currently looking to recruit a Goods Inwards Inspector Subcontractor on an initial 12 month contract. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph rising to £29.70ph after 12 weeks (Umbrella). Overtime: hours worked over 37 hours per week is paid at time and a half. Goods Inwards Inspector Job Description: The role of the Goods Inwards Inspector is to ensure that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects. Verify and accept procured product in line with contractual conditions. Practiced in reading and understanding assembly drawings with due regards to dimensional tolerances and machined. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first off inspections. Produce relevant inspection/quality control documentation. Check and complete all paperwork associated with the delivered article. Ensure inspections times are met. Control defect items via segregation from good product. Raise and maintain relevant defect reports. Maintain product verification approval process via regular audits. Inspection of PCB Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain to the highest level, workmanship standards and product quality. Contribute to the maintenance of an orderly and safe working environment. Skillset/experience required: The successful candidate should be a team player who is able to demonstrate customer focus. They should be adaptable to any work-related processes and working practices. Goods Inwards Inspection / Quality Inspection background Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. Formal further education certificate to HNC or equivalent certificate. SAP literate is desirable

My client is looking for an Project Officer to join them on an initial 12-month basis. As the Project Officer you be supporting the Project Manager's and Project Team's in the co-ordination, planning and control of projects. Role: Project Officer Pay: £28 - £30 per hour via Umbrella Location: Bolton Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: BPSS to start, SC whilst in post Responsibilities: Maintenance and regular reporting of project Key Performance Indicators. Act as an interface within Manufacturing to help ensure programme delivery, quality and cost. Provide, understand and present information at internal reviews and meetings. Assist the team with Risk and Opportunity management. Assist in the compilation of Manufacturing estimates and Cost at Completions. Assist in the compilation and analysis of workload forecast. Compilation and maintenance of project programmes and schedules. Maintain and improve the interface with internal customers and external departments. Skillset/experience required: At least 2 years of project support experience, ideally in an engineering or manufacturing environment. A clear, strong and effective communicator. Numerate and confident with basic mathematics Knowledgeable and experienced in the basic application of Project Management skills at an assistant level. Computer literacy - basic but proven skills required in MS Word, spread sheets, presentations and planning tools. Experience with SAP materials management system and Primavera 6 planning tool is preferred but not essential. Local, job specific training will be provided as appropriate.If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry's best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. This role does require someone who has lots of experience of using SAP. Hourly Rate: £24.19ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Technical Administrator Job Description: We are seeking a technical admin to join the Calibration & Maintenance team at our Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities. Key areas of responsibility are as follows: Managing Spares. From COTS (commercial off the shelf) down to components e.g. IC’s, connector savers & service kits. Creation of calibration and service kits and there redeployment back in to our stock holding. Creation of material masters with our SAP management system. Working with engineers to ascertain min / max quantity levels. Organisation of current stock and regular stock taking. Ordering of new stock. Using Jira to notify people of where items are up to. Assisting the Control Team Lead in the management of critical spares. Liaising with relevant Engineering function to determine their requirements Deploying critical spares packages and managing calibration requirements to minimise downtime to production. Providing SAP training and producing documentation for calibration and maintenance specific activities for the control team. What we are looking for: Experience and knowledge of managing spares. Working knowledge of the SAP (Systems Applications and Products in data processing) enterprise resource planning system. Good analytical and problem solving skills. Experience in creating and managing material masters and min / max levels. Whilst not essential, a good understanding of calibration principles and processes would be beneficial. The ability to deal with multiple issues, tasks and priorities concurrently

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. Hourly Rate: £24.19ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Technical Administrator Job Description: We are seeking a technical admin to join the Calibration & Maintenance team at our Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities. Key areas of responsibility are as follows: Managing Spares. From COTS (commercial off the shelf) down to components e.g. IC’s, connector savers & service kits. Creation of calibration and service kits and there redeployment back in to our stock holding. Creation of material masters with our SAP management system. Working with engineers to ascertain min / max quantity levels. Organisation of current stock and regular stock taking. Ordering of new stock. Using Jira to notify people of where items are up to. Assisting the Control Team Lead in the management of critical spares. Liaising with relevant Engineering function to determine their requirements Deploying critical spares packages and managing calibration requirements to minimise downtime to production. Providing SAP training and producing documentation for calibration and maintenance specific activities for the control team. What we are looking for: Experience and knowledge of managing spares. Working knowledge of the SAP (Systems Applications and Products in data processing) enterprise resource planning system. Good analytical and problem solving skills. Experience in creating and managing material masters and min / max levels. Whilst not essential, a good understanding of calibration principles and processes would be beneficial. The ability to deal with multiple issues, tasks and priorities concurrently

Senior EC&I Engineer Location: Bolton Salary: DEO £60,000.00 + Employment Type: Full-Time Permanent or Contract Overview We are seeking an experienced Senior EC&I Engineer to support a key client in Bolton, specialising in the design, installation, maintenance, and troubleshooting of automated door and access systems. This is a technically focused role acting as a central point for Electrical, Control & Instrumentation (EC&I) activities. You will work on a diverse range of systems-from pedestrian automatic doors to large industrial and safety-critical doorsets within nuclear, defence, transport, and other high-hazard environments. Key Responsibilities Technical & Design Lead EC&I design activities across automated door and access control systems Design and develop: Wiring schematics Control panels and assemblies Cable schedules Produce detailed EC&I drawings, calculations, and technical documentation Ensure systems comply with required Performance Levels (PL) or SIL ratings Use SISTEMA to analyse and verify safety-related control systems (SRP/CS) Project & Site Delivery Conduct site visits to assess existing installations and define modification requirements Support installation, commissioning, and ongoing maintenance activities Provide fault diagnosis and troubleshooting support to site teams Assist with Functional Design Specifications (FDS) and project scoping Collaboration & Stakeholder Management Act as a focal point between: Mechanical Engineers Project teams Subcontractors External stakeholders and clients Support multi-disciplinary integration across departments Liaise with internal and external customers to ensure successful project delivery Compliance & Quality Assurance Ensure compliance with: Machinery Directive UK Supply of Machinery (Safety) Regulations Relevant British and ISO standards Review, check, and technically verify EC&I drawings and documentation Carry out approval responsibilities in line with company processes Contribute to Non-Conformance Reports (NCRs), including raising and resolving issues General Responsibilities Maintain flexibility to support project deadlines, including overtime where required Undertake additional duties appropriate to the role and seniority level Essential Requirements Qualification in Electrical Engineering or related discipline (NVQ Level 3, HNC/HND, or equivalent) Proven experience with: Automated doors, access systems, or similar electro-mechanical systems Strong understanding of: Electrical systems and control circuits Fault-finding and diagnostics Experience interpreting electrical schematics and drawings Ability to independently design compliant EC&I systems Technical Knowledge Familiarity with relevant standards, including: BS EN 16005 (Pedestrian Doors) BS EN 12453 BS EN ISO (phone number removed) & (phone number removed) BS EN 60204 BS 7671 Experience producing EC&I documentation, reports, and specifications Experience performing engineering calculations (manual and software-based) Competence with AutoCAD 2D and/or Inventor 3D Understanding of: Motors, gearboxes, clutch/brake systems Sensors and safety devices Variable Speed Drives (VSDs) PLCs and programmable safety systems Desirable Skills & Experience Experience with: Roller shutters, sectional doors, industrial sliding doors, or powered access systems Experience in safety-critical sectors (nuclear, defence, heavy industry) Knowledge of: Safety PLCs Interlock systems Emergency release mechanisms VFDs Experience using SISTEMA for PL calculations ECS/CSCS card Security Clearance (SC) or eligibility to obtain Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Mechanical Engineer subcontractor on an initial 12-month contract. Hourly Rate: £35ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Mechanical Engineer Job Description: We are seeking a Mechanical Engineer to join our Calibration & Maintenance Team. The work is extremely varied, interesting and challenging. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across the company to resolve routine and non-routine tasks arising within the business. Responsibilities: The main aspects of the role will be as technical support for the metrology department at Bolton supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance. You will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work. You will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department. You will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations. Skillset/experience required: Minimum qualification: HNC in Mechanical Engineering. Experience and knowledge of calibrating torque tools to ISO 6789-2:2017 required. Good knowledge of Geometric Dimensioning & Tolerancing (GD&T) required. Experience and knowledge in dimensional calibration required Experience and knowledge of using and creating programs for coordinate measuring machine required. Good knowledge of temperature and pressure calibration desirable Able to deal with multiple issues, tasks and priorities concurrently

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit a Project Coordinator / Technical Administrator subcontractor on an initial 12-month contract. This role could suit someone from a Project Coordinator, Project Assistant, Materials Controller, Engineering Coordinator or SAP Materials Coordinator background. Hourly Rate: £24.19ph Overtime Rate: Hours worked over 37 hours per week, are worked at the Overtime rate of time and a quarter. Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Technical Administrator Job Description: We are seeking a technical admin to join the Calibration & Maintenance team at the Bolton site. The main focus of the role will be to manage all parts used in the calibration & maintenance of bespoke test systems on site. This will need to be managed in our SAP system. Working as part of a small Control Team within the wider Calibration & Maintenance department, you will produce and review technical reports for the management of spares and look at introducing better working practices on how we control them within SAP. You will be also working on producing service kits for regular maintenance that is performed on our manufacturing facilities. Key areas of responsibility are as follows: Managing Spares. From COTS (commercial off the shelf) down to components e.g. IC’s, connector savers & service kits. Creation of calibration and service kits and there redeployment back in to our stock holding. Creation of material masters with our SAP management system. Working with engineers to ascertain min / max quantity levels. Organisation of current stock and regular stock taking. Ordering of new stock. Using Jira to notify people of where items are up to. Assisting the Control Team Lead in the management of critical spares. Liaising with relevant Engineering function to determine their requirements Deploying critical spares packages and managing calibration requirements to minimise downtime to production. Providing SAP training and producing documentation for calibration and maintenance specific activities for the control team. What we are looking for: Experience and knowledge of managing spares. Working knowledge of the SAP (Systems Applications and Products in data processing) enterprise resource planning system. Good analytical and problem solving skills. Experience in creating and managing material masters and min / max levels. Whilst not essential, a good understanding of calibration principles and processes would be beneficial. The ability to deal with multiple issues, tasks and priorities concurrently

Shift Engineer (Temp to Perm) Location: Westhoughton BL5 Salary: £42,500 + Benefits Shift Pattern: Days | 39 hours per week Contract: Temporary to Permanent We are looking for an experienced Shift Engineer to join a fast-paced manufacturing environment, supporting production through effective maintenance, fault finding, and continuous improvement of site machinery and equipment. This is an excellent opportunity for a multi-skilled engineer looking for long-term stability, development, and the opportunity to secure a permanent position within a well-established business. The Role As a Shift Engineer, you will play a key role in ensuring machinery and production equipment operates safely, efficiently, and with minimal downtime. Working closely with production teams, you will be responsible for both planned and reactive maintenance across the site. Key Responsibilities Carry out planned preventative maintenance (PPM) on production machinery and site equipment Respond quickly and effectively to machinery breakdowns to minimise downtime Diagnose and repair both mechanical and electrical faults Support continuous improvement projects to improve equipment reliability and production efficiency Work closely with operations teams to identify and resolve recurring issues Ensure all maintenance activities are completed safely and documented accurately Assist with machinery installations, upgrades, and improvement works when required About You To be successful in this role, you will have: Proven experience working as a multi-skilled maintenance or shift engineer within a manufacturing or production environment Strong mechanical and electrical maintenance skills Food industry experience Excellent fault-finding and troubleshooting ability The ability to work independently and make sound engineering decisions under pressure A proactive mindset with a focus on reliability, safety, and continuous improvement Highly Desirable Experience Experience using any of the following systems would be highly advantageous: Shire Piranha Frontline Whats on Offer £42,500 salary 39-hour day shift pattern Temporary to permanent opportunity 25 days annual leave + bank holidays Christmas shutdown Regular overtime available for a minimum of 10 weeks per year, paid at time and a half Full onboarding, training, and ongoing engineering support Opportunity to join a supportive team with long-term career prospects This is a fantastic opportunity for an engineer who enjoys hands-on problem solving, working with modern production equipment, and being part of a business that invests in its people and engineering function. TPBN1_UKTJ

Mechanical Fitter Defence Manufacturing Bolton | Long term contract opportunities Were working with a leading UK defence manufacturer in Bolton to recruit experienced Mechanical Fitters to support ongoing build and test programmes. This is a hands on mechanical fitting role within a clean, structured manufacturing environment ideal for fitters who take pride in precision and quality. What youll be doing Carrying out mechanical assembly, build and test activities in line with engineering instructions Working from drawings, work instructions and manufacturing data packs Using a wide range of hand tools, fixtures, gauges and measuring equipment Certifying your own work in line with product certification and workmanship standards Completing build documentation accurately and on time Working as part of a close knit production team to hit build schedules This role suits fitters who enjoy detailed, repeatable mechanical work, not reactive site maintenance. What do you need?: Electrical/Mechanical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard or Electrical/Mechanical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) and Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved (These qualifications must meet the standard to be considered for the role). Additional Skills: Manual handling training. Lifting & Slinging (Including overhead cranes) and ESD training. Completion of Apprenticeship required Tools & Equipment Youll Be Using Manufacturing / Assembly Tools Hand tools including spanners, sockets, Allen keys and screwdrivers Torque wrenches (including torque setting and witness marking where required) Bearing presses and mechanical presses Fixtures, jigs and assembly aids Drills and pneumatic or electric power tools Measuring & Inspection Tools Vernier calipers Micrometers Steel rules and gauges Go / No Go gauges Height gauges and basic inspection tooling Test & Build Support Equipment Test rigs and mechanical build stations Hydraulic and pneumatic connections (as applicable) Overhead cranes and lifting equipment (where trained) Manufacturing data packs, build instructions and certification records What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the role: For more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. TPBN1_UKTJ

At Warburtons, family is at the heart of our business. Five generations' worth of expertise that goes into making our bakery products allows us to continue a tradition of baking inherited over the past 150 years. Warburtons is the largest bakery brand in the UK, but that doesn't allow us to rest on our laurels. We are pioneers of the industry and ambitious market leaders, always seeking to challenge ourselves and convention. It is part of our philosophy to provide honest good sense on issues of health and well-being, helping the whole family to enjoy our products as part of a healthy, balanced diet, through a range of products to suit all meal occasions, lifestyles and tastes. Role: Technical Coordinator Location: Bolton Contract: Permanent Salary: Competitive Are you a meticulous problem-solver with a passion for baking and an eye for technical detail? The Recipe Warburtons are seeking a highly organised and proactive Technical Coordinator to join our team and ensure the smooth, efficient production of our quality baked products. If you thrive in a fast-paced environment and enjoy bridging the gap between baking artistry and technical precision, we want to hear from you! Your strategic thinking and operational expertise will help us maintain the highest standards in ensuring the freshest products are delivered on time and in full to our customers. The Role As a Technical Coordinator, you will report to the Site Technical Manager, and play a crucial role in maintaining and driving product quality standards, improving our production processes, ensuring adherence to food safety standards and optimising efficiency. You will be the go-to person for technical troubleshooting and will work closely with our Compliance, Production and Engineering teams. You'll support the Technical Manager to maintain food safety, hygiene and quality standards.Ensure site compliance across bakery and depots through data, audits and systems, and act as site quality lead when the Technical Manager is absent. Quality Control: You will Implement and maintain robust quality control procedures, conducting regular process audits to ensure consistent product quality and adherence to specifications. Product Assessment: Testing products in our small laboratory,you will monitor quality parameters and identify any areas outside of our specification. You will also collate samples for external testing and sampling. Bakery Trials: Working closely with our Centre Technical Team, you will co-ordinate site bakery trials for existing or new ingredients, packaging and products. Document management: You will be a site expert on document management ensuring all our process specifications are accurate and up to date. With the manufacturing teams you will ensure maintenance of accurate production process records and quality control checks, generating regular reports on quality performance and Key KPi’s. Equipment Calibration: You will manage our internal calibration schedule, liasing with both internal and external engineers to ensure the accuracy of our quality & food Safety monitoring equipment. Training & Support: You will provide technical support and training to bakery staff on production processes and quality. Food Safety: You will be part of the HACCP & QMS Internal Audit teams, and provide support to the site food safety team, to ensure to all relevant food safety regulations and standards are maintained. You will be an integral part of the team ensuring we maintain our BRC accreditation and other external audits. Problem Solving: In conjunction with the manufacturing teams you will analyse production processes, utilise our data capture monitoring systems, be involved in root cause problem solving sessions, identify areas for improvement and implement solutions to optimise quality, efficiency and reduce waste. Essential Ingredients Experience of working in a fast-paced environment with Food Safety or quality control experience. Excellent IT skills including experience of working with various IT systems, Excel and spreadsheets. Strong team working ethic. Self-motivated with the ability to work independently and as part of a wider site function. Good relationship builder- collaborative in approach, establishing credible, trusted relationships with both internal and external contacts at all levels. Good communication skills, both written and verbal. Strong balanced judgement and use a pragmatic common-sense approach. Attention to detail and high, consistent levels of accuracy. Prioritising and Organisation - Ability to plan, organise and monitor a diverse workload. Quality data & KPIs: Collate, trend and report QMS data to drive decisions. Product quality reviews: Routine assessments, benchmarking and corrective actions. Trials & improvements: Coordinate trials, analyse results, document outcomes. Audits & compliance: Conduct internal audits and close corrective actions. Training & culture: Champion quality through coaching and clear communication. Desirable Skills & Experience: Relevant qualifications in food science, or a related field. Experience working with NPD, ingredients and carrying out product trials Experience with bakery equipment and processes. Experience working with digital data capture, optical vision systems and document management systems. Knowledge of lean manufacturing principles. Proven experience in a technical coordination or quality control role within a food production environment (bakery experience preferred). Strong understanding of food safety regulations and HACCP principles. Excellent problem-solving and analytical skills. Strong organisational and time management skills. Ability to work independently and as part of a team. Excellent communication and interpersonal skills. Technical aptitude and ability to understand and troubleshoot machinery leading to issues with product quality. Extra Dough At last and by no means least you will want to know what your breads worth. A slice of the annual profits (discretionary profit share) Family time is important to us so as well as your holiday entitlement, we'll give you the opportunity to purchase up to an extra weeks annual leave Award winning pension scheme with company contributions Life assurance Products you will love along with deals and discounts for you and the family through our Extra Dough website Continued investment in your personal development Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew! Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract. The department are looking for someone with the following skills and experience: Experienced Project Officer / Project Coordinator / Project Support Excel Essentials - demonstrable use of lookup and conditional based formulas, conditional formatting, pivot tables Power Query and Power BI report maintenance experience desirable SAP materials management system. Primavera 6 planning tool is preferred but not essential. Certification in Project Management, would be an advantage. At least 3 years of project support experience, ideally in an engineering or manufacturing environment. Supporting the Project Manager’s and Project Team’s in the co-ordination, planning and control of projects. Proficiency in Microsoft Office applications, such as Word, Excel, Outlook, PowerPoint, MS Project and Visio. Rate: £30.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Project Officer Job Description: This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project Officer support the Heads of Manufacturing and Production Project Managers across multiple projects and sites as required, providing delivery of the following: Maintenance and regular reporting of project Key Performance Indicators. Act as an interface within Manufacturing to help ensure programme delivery, quality and cost. Provide, understand and present information at internal reviews and meetings. Assist the team with Risk and Opportunity management. Assist in the compilation of Manufacturing estimates and Cost at Completions. Assist in the compilation and analysis of workload forecast. Compilation and maintenance of project programmes and schedules. Maintain and improve the interface with internal customers and external departments. Role requirements (skills, training and qualifications): Enthusiastic, pro-active and tenacious individual who can prioritise as well as manage day-to-day tactical decisions. A clear, strong and effective communicator. Numerate and confident with basic mathematics Knowledgeable and experienced in the basic application of Project Management skills at an assistant level. Computer literacy - basic but proven skills required in MS Word, spread sheets, presentations and planning tools. Experience with SAP materials management system / alternative Materials Management system Primavera 6 planning tool is preferred but not essential. Other PM tools would be acceptable Local, job specific training will be provided as appropriate

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Wiring Operator on an initial 12 month contract and then ongoing and long-term thereafter. Contract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: Hourly Rate: £28.35ph for the first 12 weeks and then £29.70 after week 12 (Umbrella). Overtime Rates of 'time and a half' for all hours worked over 37 hours per week. Electrical Wiring Operator Job Description: An exciting opportunity for a Skilled Electrical Wiring Operator to join our Calibration and Maintenance team for a 12-month period in a fast-paced but friendly and inclusive Manufacturing environment. We are seeking a Skilled Wire Operator to join our Calibration & Maintenance Team, to fault diagnose and repair bespoke cabling to drawing specifications. Fault finding and subsequent repair of cable assemblies. Carry out surface mount repair on CCAs. Maintain and repair test/measuring equipment to component level. PAT testing across the manufacturing site. Interrogate drawings during fault finding activities. Safety systems testing of Test & Measuring equipment in line with documented procedures. Provide Technical support to facilitate the efficient servicing of STTE to enable production testing of hardware and repair phases of the contract. Maintain excellent workspace husbandry disciplines. Maintain a high degree of tool control and FOD practices. Assist with maintenance of manufacturing aids as and when required. What we're looking for from you: All three of the below are required: Electrical Engineering / Manufacturing Apprenticeship (Advanced Level or L3 Standard) Electrical Engineering / Manufacturing Level 3 academic qualification (ONC, diploma, etc.) Electrical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved IPC 620 & Dynamic Cabling certified/ trained preferred. Possess experience in electrical wiring and assembly. Previous experience in the aerospace or defence industry would be desirable