Trabajos electrical engineering technician en PortsmouthCrear alertas

At TÜV SÜD Group we are passionate about technology. Innovations impact our daily lives in countless ways, and we are dedicated to being a part of that progress. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD Group. Working as part of a team of Wireless Test Technician and Engineers, (after a period of training) you will contribute to the provision of a Wireless testing service, specifically performing testing on radars, Emergency Radio Beacons, AIS and digital interfaces.Duties and Responsibilities - What will you be doing?Testing of radar and Emergency Radio Beacons to COSPAS SARSAT / RTCM / IEC / EN test standards both within the chambers and radio test laboratories at Octagon House, or; testing of AIS, Radar, ECDIS and other marine products using protocol & digital interface techniques.Recording test results using various electronic logbook systems and production of test reports, following company quality procedures.Ensure that all work is carried out in accordance with the applicable regulatory requirements or defined Test Plan supplied by the customer, assisting with the development of test plans with the customer as necessary.Close liaison with the Project Manager and/or customer, to provide technical support and ensure work is carried out accurately and within the timescales allowed.Support the development of the team, compiling and delivering training, sharing expertise with colleagues and supporting and coaching wherever possible.Commercial and technical validation of projects (may require site visits)Internal validation and vetting of test reportsAdhoc delivery of offsite testing as required.Any other duties commensurate with a Senior Engineer role. What are we looking for? Essential Criteria:Experience of using RF test equipment such as spectrum/network analyser, oscilloscope, signal generator, RF power meter etc.Educated to Level 3 in Electrical and Electronic Engineering or be able to demonstrate equivalent and relevant experience.Engineering experience in a test based role within the Marine industryAbility to work independently and be proactiveA desire to learn new skills and willing to understand new disciplinesDesirable Criteria:An understanding of the requirements of the COSPAS SARSAT / RTCM / IEC / EN standards.A full UK driving licence and the ability to travel to customer sites or offsite locationsExperience performing RF accredited testing.Knowledge of Emergency Beacon functionality and the certification requirements.Ability to work on various shift patternsFurther Information:TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance.At TÜV SÜD Group, we have employees from more than 100 different countries collaborating together. People of different backgrounds, skills, and pursuing different life goals. Our strength comes from these countless and varied perspectives.We are committed to be an inclusive and diverse workplace by welcoming people of all backgrounds. We want Diversity & Inclusion (D&I) to be a foundation of our company and create an environment where all our employees can trust they will be treated with respect, regardless of gender, nationality, ethnic background, faith, beliefs, disabilities, age, sexual orientation, or identity. As such, our employees are expected to behave at all times in a manner consistent with TÜV SÜD Group Code of Ethics and Company values.We firmly believe embedding D&I in the heart of what we do will inherently contribute to the success of TÜV SÜD Group. Click here to find out more about Diversity at TÜV SÜD Group.

Join a world-renowned aerospace organisation as a Ship Service Technician in Portsmouth on a full time basis Due to a drive for greater success, this advanced manufacturing business is currently searching for Ship Service Technician to add to their talented, hardworking team in Portsmouth on an initial 3 months contract. Striving for innovation and creativity you can ensure no two days will be the same. The rate per hour: £27.84 per hour inside IR35 / umbrella The rate per hour: £27.84 + £10.47 per hour inside IR35 / umbrella • To develop and maintain a broad knowledge of electro/mechanical systems associated with RN ships so as to ensure safety of personnel and equipment., • Carry out as directed, electro/ mechanical low level maintenance and equipment keep alive as required by contract specification., • To assist with implementing the Health and Safety controls in ship's for which BAE has Care and Custody, • Will have a minimum of 3 years experience in an RN or relevant Marine engineering environment., • High Voltage Competent Person., • Working knowledge of electrical safety and testing #J-18808-Ljbffr

Our prestigious manufacturing client are currently seeking a Lead Electrical Design Engineer to join their team in Southampton You will play a key role in the design and development of the electrical systems across their yacht range. Reporting to the Design Manager, you will be responsible for producing accurate and detailed electrical drawing packages, including electrical schematics, panel designs and cable running schedules for their yachts. This is a highly technical role with a tangible output, providing accurate 2D CAD information to support Production. You will also contribute to product improvement, R&D and value engineering projects, ensuring best practice is incorporated into both new designs and existing models. Working closely with Production, Engineering, Joinery, Procurement, Client Managers and the wider Design team, you will help ensure electrical design standards, quality and consistency are maintained across the range. • Have in-depth knowledge of marine AC and DC electrical systems, materials and techniques., • Have a strong understanding of electrical installation within small craft production., • Have a sound understanding of yacht systems, including component locations and installation requirements., • Have significant electrical design experience, ideally within a marine or comparable environment., • Have strong AutoCAD skills and be confident producing detailed 2D electrical drawings., • Have good IT skills, particularly Microsoft Excel, Word and Outlook., • Be able to interpret manufacturing and installation requirements and translate these into accurate design information., • Have excellent attention to detail and a commitment to quality., • Be able to manage multiple priorities and consistently meet deadlines., • Have strong communication skills and the ability to work effectively with Production, Engineering, Procurement and other stakeholders., • Design-related degree or relevant qualification, or equivalent electrical design experience., • 18th Edition IET Wiring Regulations qualification., • BMEA Marine Electrical Technician qualification (Desirable)., • Oversee and maintain electrical design standards across the range., • Produce, check, update and issue accurate 2D electrical schematic and panel drawings using AutoCAD., • Develop contract-specific 2D CAD electrical information for Production., • Produce accurate cable running schedules, considering manufacturing processes and installation requirements., • Establish clear and accurate scopes of supply using the project's Master Work List., • Lead the Electrical Design Change Request (DCR) process across the range., • Ensure electrical design information is delivered accurately and to agreed deadlines., • Provide technical oversight to the wider Electrical Design team and Electrical Production Managers to ensure required deliverables and deadlines are achieved., • Maintain and manage resources within the Electrical Design team., • Work closely with Production, Electrical, Engineering and Joinery teams to ensure designs meet manufacturing and installation requirements., • Attend development, production and project meetings, providing timely technical information and responding to production feedback., • Work with Client Managers and Procurement to manage the electrical design aspects of the external supply chain., • Contribute to management reporting and ensure design information reflects contract variations and production requirements., • Contribute to product improvement, R&D and value engineering projects., • Identify opportunities to improve electrical systems, quality, consistency and manufacturing efficiency., • Keep up to date with developments in marine electrical technology and apply relevant best practice across the range., • Experience with marine digital switching systems such as CZone., • Experience with marine lighting systems and system integration., • Experience with marine electrical and hybrid drive systems., • Experience working within yacht or small craft production., • Experience leading or coordinating electrical design resources., • Proactive and self-motivated with a strong approach to problem solving., • Highly organised and able to manage deadlines effectively., • Exceptional attention to detail., • Quality-focused with a commitment to getting things right first time., • Professional and respectful in dealings with colleagues, suppliers and external partners., • Positive, helpful and consistent in approach., • Honest and demonstrates strong personal integrity., • Collaborative team player who can build effective relationships across departments., • Confident taking ownership and driving design activities through to completion. If you are an experienced Electrical Design Engineer looking for the opportunity to work on some of the world's most prestigious sailing yachts, we'd love to hear from you. Todd Hayes Ltd is an equal opportunities employer. #J-18808-Ljbffr

Our engineering clients based close to Fareham have an exciting opportunity for a Senior Production Technician to join their growing team. Check you match the skill requirements for this role, as well as associated experience, then apply with your CV below. The Senior Production Technician will be able work with complex military connectors and have soldering and wiring skills and enthusiastic to join a busy production team! System Assembly & Build Quality: • Assembly and test of IPCs, Servers, Racks and other electro-mechanical assemblies to defined specifications and the highest quality standards • Interpret and accurately follow work instructions, drawings and customer requirements • Proactively identify and challenge inconsistencies, errors or unclear instructions • Ensure full compliance with ESD controls and handling requirements • Take ownership of build quality, ensuring right-first-time delivery Sub-Assembly: • Manufacture and modify cable assemblies using approved tools and methods • Perform crimping, soldering and wiring to meet the requirements of IPC-A-620 • Inspect and verify work completed by production technicians • Ensure all assemblies meet quality and durability requirements System Installation, Configuration & Test: • Configure, install and test of Rack systems and IPC's, in line with customer requirements • Complete functional testing and ensure accurate recording of results • Diagnose and resolve basic build or configuration issues • Escalate complex technical issues appropriately • Share best practices and ensure consistent working methods with Junior Technicians Required Skills & experience: • Proven experience in electrical / electronic assembly within a manufacturing environment • Hands-on experience building rack systems, IPCs, servers, or similar complex electro-mechanical assemblies • Strong capability in cable assembly, crimping, and soldering to recognised standards Working hours: 37.5 hours per week, Monday to Friday. xrnqpay 08:00 – 16:00 and 30 minutes lunch break.

SC Engineering Group is recruiting for an experienced Electrical Technician to join an established engineering business specialising in the design and manufacture of besp. Electrical Technician – Special Purpose Machinery.

Work as part of the Lighting and Communications operational team to install, maintain, inspect and repair street lighting and associated electrical infrastructure.

Experienced Electrical Technician sought for a permanent, full-time role in Basildon, Essex, involving the design and manufacture of special purpose machinery.

South Lanarkshire Council require experienced Electricians to support the delivery of electrical works within Building Services. You will have a flexible approach to managing varied workloads as you will be required to carry out all associated electrical works including new build, refurbishment, mai

Work as part of the Lighting and Communications operational team to install, maintain, inspect and repair street lighting and associated electrical infrastructure.

Multi-Skilled Maintenance Engineer.Competitive + Benefits + Overtime Opportunities.Roating Shifts 04:00am -12:30pm / 12pm - 20:30pm.We are currently recruiting for a Multi-Skilled Maintenance Engineer to join a market-leading food manufacturing business.This is an excellent opportunity for an experi

With a portfolio of blue-chip clients, we deliver a wide variety of high-quality electrical installations, ranging from high-end commercial office refurbishments to complex data centres.

Essential Requirements of the Maintenance Engineer (night shift) Time served or HNC (or equivalent) qualification in an electrical, mechanical or electro-mechanical engineering discipline. Info about what the Maintenance Engineer (night shift) role entails Exciting electro-mechanical Maintenance E

Embark on a Journey with Enerveo: Crafting Excellence for Over 25 Years! Enerveo is one of the UK's leading Highways Electrical contractors, delivering full-service street lighting and highway electrical solutions for local authorities and infrastructure partners. What do I need to be successful in

You would be carrying out the outstanding HV and LV electrical installations, terminations, multicore/control wiring and protection panel works.

Do you want to join a growing precision engineering business where you can take ownership of the design function, introduce new te.

You will carry out electrical repairs, planned testing and compliance work, supporting the Maintenance Manager.

Electrical Test TechnicianJoin a growing, profitable engineering business in a hands-on electrical testing role, inspecting, energising, fault-finding and commissioning bespoke and standard ovens and furnaces before product release. This role is officially known as a Test and Inspection Technician.

Qualified Electrician required.Southampton based, £ 30000 - 35000 + car + fuel card etc.Expanding company in the Solar PV space are looking for a Field Engineer who will be responsible for the operations and maintenance of a number of ground mounted solar farms.A qualified electrician, you will eit

Were working with a global industrial electronics manufacturer looking for an experienced Process Engineering Manager to lead a growing team and drive manufacturing performance across a high-volume production environment.

Electrician, Maintenance Electrician, Electrical Engineer, Maintenance Engineer, Approved Electrician, Domestic Electrician, Electrical Tester, EICR Engineer, Installation Engineer, Social Housing Electrician. Apply today for the opportunity to join a skilled maintenance team where your electrical e

Maintenance Engineer|Multiskilled|Maintenance|Repair|PLC|Service Engineer|Service|PPM|Maintenance|Fault Finding|Engineer|Engineering|Production|Manufacturing|Progression|Static|Single Site|PPM|Reactive|Electrical|Electro-Mechanical|Multiskilled|Fitter|Technician|FMCG|Food|East Anglia|Suffolk|Norfolk

An Electrical or Multi-Skilled Engineering background. Working as part of a close-knit engineering team, you'll have exposure to a diverse range of equipment and technologies, providing the opportunity to further develop both your electrical and mechanical skillsets while contributing to the success

Are you currently working towards a Maintenance Engineering qualification and looking for an opportunity to develop your skills within a busy engineering environment?. An interest in both mechanical and electrical engineering. Hands-on training and support from an experienced engineering team.

Are you an electrician with experience within an engineering, manufacturing or industrial environment? Are you looking for an exciting new role within an industry leading engineering group who pride themselves on first class training and development?. You will carry out electrical installations, wor

What you'll bring Do you have a NVQ Level 3 in Electrical (or equivalent), proficiency in the 18th Edition Electrical Wiring Regs (BS7671)? Have you got proven industrial experience? Do you have Industrial Electrical Maintenance experience? Can you demonstrate commitment to safety and adherence

Electrical Maintenance Engineer - FM Service Provider - Commercial Building - Wolvercote, Oxford - Up to £55,000 per annum Exciting opportunity to work for a leading FM service provider situated in Wolvercote, Oxford. I am currently recruiting for a Multi-Skilled Electrical Maintenance Engineer t

Job Summary Based in our thriving manufacturing centre of excellence, the Materials Engineering Technician will join a busy team specialising in providing composite manufacturing engineering capability to operational and developmental programmes to enable and deliver zero defect projects utilising

Join a well-established social housing contractor on a permanent contract as a Joiner , covering the E16 area of London.I'd love to hear from anyone with experience working as a Joiner , ideally within social housing or domestic properties.The Joiner role is offering: • £32,000 per year plus a

Maintenance Engineer – Nights Havant £50,000 - £55,200 Permanent Are you a Maintenance Engineer with strong electrical, mechanical and fault-finding skills looking for a site-based night-shift opportunity? Join an established manufacturing environment where you will provide hands-on engineering

Role Overview Electrical & mechanical PPM, reactive and breakdown maintenance Working as part of a skilled, friendly engineering team Reporting into an experienced Maintenance Manager Maintaining fast-moving, high-volume industrial production equipment Involvement in CI/Kaizen projects and cross-fun

As their business continues to grow, they are looking for an experienced Electrical Installation Engineer & QC to join their Projects Team and play a key role in delivering high-quality electrical installations. Complete inspections, testing, fault diagnosis and repairs across electrical and control

This role would suit an experienced Aircraft Electrician, Avionics Technician or Electrical/Avionics Engineer with strong practical experience in wiring, electrical systems, testing and fault diagnosis. What will you bring? Essential Skills Level 3 qualification, apprenticeship or equivalent

Facilities Maintenance Technician We are currently recruiting for a Facilities Maintenance Technician to support the safe and efficient running of a leading manufacturing company based in Portsmouth. Minor plumbing, carpentry, decorating and basic electrical work. If you could be interested in this

The role will involve maintaining and repairing a range of electrical, mechanical plant and equipment in retail outlets, undertaking regular planned store visits to complete reactive, PPMs and minor repairs as requested by the customer (including non-electrical). NVQ Level 3/City and guilds 236 Part

The Role:Electrical maintenance, fault finding and repairsCoordinating internal teams and contractorsHighly automated industrial environmentMonday to Friday, 42 hours per weekOngoing training and developmentThe Person:NVQ Level 3 or recognised electrical apprenticeshipElectrical maintenance and faul

Engineer, Engineers, Engineering, Maintenance, Mechanical, Building, Facilities, Facility, Buildings, Service, Cambridge, Cambourne, Chesterton, Cambridgeshire.

Your responsibilities will include: Leading and organising the small site engineering team Taking responsibility for the day-to-day engineering and maintenance function Carrying out planned and preventative maintenance Responding to machinery breakdowns and engineering issues Supporting fault-findin

Youll be joining a well-structured, stable maintenance team with strong support, the right resources to do the job effectively and a shift rotation that will see you work very few nights… Benefits: In return for your Maintenance skills and experience, we offer: A Starting Salary in the region of �

As the Facilities Maintenance Technician, you will be getting involved in: Providing general building and facilities maintenance across two sites Carrying out plumbing and mechanical maintenance repairs Responding to maintenance breakdowns, faults and site repairs Completing planned preventative mai

The Role As a Workshop Technician, you will: Provide practical support and guidance to apprentices during training sessions Assist in maintaining a safe, organised, and effective workshop environment Support trainers in delivering high-quality, engaging learning experiences Ensure equipment and reso

Maintenance Engineer Wellingborough £51,000 3 Shifts (6am – 2pm, 8am – 4pm, 2pm – 10pm) (Earlies, Days and Lates) – No Nights or Weekends Benefits: Company bonus up to as much as 10% on top of your annual salary Cash Health Plan – Free for children, family and enhanced cover can be added

Electrical Maintenance Engineer (Manufacturing) Up to 50k Benefits North West – Perm Ref: ABJ6742 Location: North West (Primary Manufacturing Site) Hours: On-site | Day Shift (6:00am–2:00pm / 8:00am–4:00pm – to be discussed) An established and growing manufacturing business is looking to re