Engineer electronic jobs in BoltonCreate job alerts

PLEASE READ BEFORE APPLYING: Please note that in order to be considered for this opportunity you will need to be eligible for SC (Secret Level) UK Security Clearance. Both the role and client site have ITAR nationality restrictions Role Overview: Morson are recruiting on behalf a leading defence equipment manufacturers based in Bolton, Greater Manchester. This is a contract role although highly likely to be long-term. Rates: £27.54 per hour PAYE or £37 per hour Umbrella Monday - Friday 37 hours + The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level Specific responsibilities include: • Provide Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations., • Support Test Facility introduction and ensure that configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions., • Support to testing of electrical/electronic weapon systems and sub-assemblies, with diagnosis of production test failures down to circuit card and potentially component level., • Identification of remedial and corrective actions, in a timely manner allowing Manufacturing to continue production in line with programme., • Evaluation of technical problems in order to develop proposals for test equipment investigations and corrective actions, including process improvements., • HNC/HND (Electronics) Level of Qualifications or equivalent, plus good level of experience in digital & analogue electronics manufacture and test., • A good understanding of measurement and test principles, and associated test equipment., • An understanding of the typical CADMID product lifecycle for test equipment is desirable., • An understanding of RF and microwave technology at subsystem level would be an advantage., • An understanding of Environmental testing (including ESS) would also be an advantage., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements., • Proven analytical and problem solving skills, with strong attention to detail., • The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.

World Class Defence Organisation is currently looking to recruit a Component Engineer / Components Cataloguer subcontractor on an initial 6 month contract. This position requires experience of components and parts, MS tools, eye for detail, able to deal with multiple queries in a support environment The role will be predominantly working from home with just 1-2 days a week in the office. Your office base can be either Stevenage or Bolton (depending on your preference). Contract Duration: 6 months initially and then ongoing.Hourly Rate: £50 per hour (Umbrella)Component Engineer Job Description:The Component Engineering department play an important support role not just within the engineering group but also within the wider business. You will be part of a multi-disciplined team completing administration activities, technical advisement, making requests to suppliers and responding to internal queries. You will ensure we deliver a comprehensive component service offering technical advice and ensuring accuracy of data.Responsibilities:Role includes the following responsibilities: • Processing and responding to support queries, • Processing component data (based on Life cycle status, Export Control and REACH/RoHS compliance), • Working within departmental processes completing administration tasks, • Support for Electronic, Electrical, Mechanical or Material commodities, • Support continuous improvement activitiesSkillset/experience required:, • Knowledge and experience of components and parts, • Engineering Degree or relevant experience, • Proficient in MS Office tools, Outlook, Excel, Word, • High concern for order and quality, • Able to deal with multiple issues, tasks and priorities concurrently, • Strong communication skills to facilitate communications with key stakeholders

Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering £45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Complete scheduled Quality Assurance audits at suppliers using standardised tools, • Conduct thorough verification/inspection of products to ensure they meet the required quality standards, • Identify and document any non-conformities in the manufacturing process and deviations from the product specifications, • Maintain accurate and organised records of all quality control activities, • Communicate findings to relevant departments/stakeholders, • Work cross-functionally to implement root cause corrective actions at supplier, • Contribute to continuous improvement initiatives to enhance the quality of our products, • Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers, • Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: • Trained auditor to AS9100, • Experienced in conducting Quality Audits & surveillance, • Quality experience within Mechanical, Manufacturing or Electronic Engineering, • Proven track record in Quality, Supply Chain or Manufacturing, • Defence, automotive, or aerospace industry experience, • Familiar with GD&T and able to use a variety of metrology equipment, • QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.), • Knowledge of the product lifecycle management, • Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools, • Continuous improvement awareness, • Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering £45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hourLocation: BoltonContract: 37 Hours per weekOvertime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’Duration: 12 Months (initially and then ongoing and long-term thereafter)IR35 status: Inside IR35 (Umbrella)Manufacturing Engineer Job Description: • As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing., • Compilation and update of Manufacturing Instructions., • Design, Commissioning and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • Support to the Non Conformance Process using SAP.Skills / Experience:, • Verification & validation, • Design modifications, • COMMISSIONING, • FMEA’s, • Configuration control, • Sub-assembly manufacturing, • Industrial Validation through the use of FMEA’s, translating design requirements, interpret Design Drawings with a view to producing Manufacturing Build Instructions. Management of Configuration control by the embodiment of Design Modifications,, • Formal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21 and level 3 (ONC) OR Formal further education certificate to HNC or equivalent certificate with experience within an engineering discipline, • 5 years’ experience within an engineering discipline., • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience of Electronic Sub Assembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within and contribute to a team environment., • Recognise and understand customer requirements, and respond to them.

Test Equipment Design Support Engineer is required for a long term contract assignment based in Bolton\n\nElectronics rather than Mechanical experience required.\n\nSkillset/experience required:\n\nTo be suitable for this role, Individuals will be able to demonstrate a number of the following attributes:\n\nDegree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle.\nProven experience in the design of one or more of the following disciplines:-\nDigital and Analogue electronics\nPower Electronics\nRF & Antenna\nInterconnects\nSafety Electronics\nTest Systems\nSchematic design\nPCB Design\nAdherence to BS EN Standards \n\nResponsibilities\n\nYou will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. \n\nOverview of department:\n\nWe have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at our state of the art manufacturing facilities.\n\nWorking within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers.\n\nModis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law. \n\nBoth Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers. \n\nBy applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website

Our client, a trusted partner of the UK's Ministry of Defence, is seeking an experienced Manufacturing Engineer with expertise in Assembly and Integration, particularly in circuit card assemblies. Based within the unit and missile assembly manufacturing facility, you will play a key role in ensuring products are built efficiently, on time, and within budget. As a vital member of the Manufacturing Engineering team, you will provide support across multiple projects, contributing to the successful delivery of high-quality manufacturing solutions. Key Responsibilities: • Prepare and maintain detailed Manufacturing Instructions to ensure accuracy and clarity., • Design, commission, and validate the necessary tooling for production processes., • Support industrial validation activities, including FMEA and First Article Inspection (FAI)., • Diagnose and resolve technical issues encountered during manufacturing., • Update route cards to reflect changes resulting from rework activities., • Manage configuration control by incorporating design modifications into manufacturing documentation., • Electrical/Mechanical Engineering / Manufacturing Level 3 vocational qualification (NVQ) *Not required if a L3 apprenticeship standard has been achieved, • (These qualifications must meet the standard to be considered for the role)., • "or", • BEng Degree in a relevant Engineering subject. Skill Requirements: • Ability to interpret design drawings and produce precise Manufacturing Build Instructions for both skilled and semi-skilled operators., • Proven experience in electronic sub-assembly manufacturing through to full system builds., • Knowledge and hands-on experience of assembly processes for small or miniature electro-mechanical actuation systems., • Strong team player with the ability to collaborate and contribute effectively within a group environment., • Ability to understand and respond to customer requirements., • Familiarity with and adherence to company processes and procedures., • Excellent communication skills, capable of engaging effectively within the team and across various organisational levels. What happens now? Upon submission of your application, should it meet our selection criteria, you will be contacted via e-mail by one of our talent acquisition specialists to arrange a screening call. This telephone chat is structured to explore a series of questions aimed at matching your competencies and capabilities to the specific demands of the position. Please note, this screening is contingent upon the initial success of your application. Security Clearance: British Citizen or a Dual UK national with British citizenshipRestrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by our clients Security Team. More about the roleFor more than 70 years, our client has been in a strong partnership with the UK military. They have accomplished numerous milestones in defence engineering and have provided essential defence capabilities to meet the requirements of the armed forces across land, sea, and air. This job is at our client's site in Bolton facility, one of the North West's leading manufacturing sites for at least 25 years. The facility offers showers and bike racks and is near the motorway, with a petrol station outside. Amenities like an onsite canteen. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Test Operator / Electrical Test Engineer on an initial 12 month contract. Experience specifically required: • Apprenticeship essential, • Significant electrical test experience requiredContract Duration: 12 Months (initially and then ongoing thereafter) Hourly Rate: £28.35ph and then after 12 weeks the rate is £29.70ph Electrical Test Operator Job Description:The Test Operator will be responsible for carrying out test tasks within the operational business, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Specific responsibilities include:, • Certify the product in line with Product Certification procedure., • Maintain product certification and approval via regular audits., • Possess a versatile skill base with the capability to apply these skills across a range of tasks., • Carry out setting-up procedures for testing, to include the awareness of the need for periodic recalibration of test equipment., • Carry out tests on electronic equipment in accordance with test instructions, using specified test equipment., • Carry out simple fault-finding procedures on electronic equipment., • Keep test records and reporting faults for rectification., • Ensure manufacturing test times are met., • Check and complete all paperwork associated with the manufacturing data pack., • Maintain to the highest level, workmanship standards and product quality., • Ensure compliance with all associated procedures applicable to the manufacturing process., • Maintain a safe working environment., • The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable., • Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21/ONC. Formal further education certificate to HNC or equivalent certificate. Manual handling training. Lifting & Slinging training (Including overhead cranes). ESD training.

My client, a world leader in the defence sector, requires an Analogue and Digital Electronic Design Engineer to join their Analogue and Digital Electronics Group, developing and delivering electronic designs for their defence products. Analogue and Digital Electronic Design Engineer Role Overview We are seeking a permanent engineer to design, develop and deliver board-level analogue and digital electronics. The role involves schematic capture, prototyping, functional testing and proving activities, as well as working with other teams on the integration of electronics into the product. You will apply circuit simulation and DFMEA techniques to ensure robust electronics design and support the product lifecycle from feasibility to production. Key Responsibilities • Board-level analogue and digital design, • Schematic capture and prototyping, • Functional testing and validation, • Integration with multi-disciplinary teams, • Application of circuit simulation and DFMEA techniques Requirements • Qualifications in Electronic Engineering, such as HND or degree level, • Experience in electronic design and development, • Experience in a manufacturing environment, supporting and resolving manufacturing issues and helping implement Design for Manufacture improvements into the design., • The ability to investigate and find Root Causes of design related issues and suggest corrective actions., • Knowledge of a range of electronic technologies, • Ability to work within multi-disciplinary teams Location: Bolton, Lancashire Hybrid working: Circa 3-4 days on-site Salary: Up to £48,000 (based on experience) plus paid overtime, flexi leave, annual bonus and other benefits. PLEASE NOTE: Due to the nature of work at our client’s site, these vacancies are only open to British Citizens who hold SC clearance or can obtain it. This is a permanent role. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You are free to resubmit your CV or details in the future, and we shall assess your suitability then.

Electronic Design Support Engineer Salary: Circa £50,000–£55,000 depending on experience Location: Bolton – primarily on-site with occasional homeworking Develop new and innovative electronic solutions to address complex customer requirements in the defence sector. You will be well-rewarded at this established defence company that produces military weapons systems with bonuses, annual salary reviews, paid overtime and so forth. About the Role: • Act as a design team representative to interface with the design and manufacturing teams to transition the product from the development phase into series manufacture., • Work with manufacturing on process and capability issues and support continuous improvement initiatives to maximise production yields, • Support non-conformance management, dealing with design queries, • Support obsolescence management by providing recommendations to the design team Requirements: • Strong Electronic Engineer with a background in RF engineering, • Detailed knowledge of RF assembly and test procedures would be advantageous, • Ability to investigate and resolve production problems, • Multidisciplinary team experience, working with both the design and manufacturing teams, supporting project changes efficiently and maintaining the production schedule, • British Citizen eligible for high-level security clearance Why this role? • Exciting opportunity to work at the forefront of technological innovation, • Supportive work environment with a clear path for development and progression, • Financial benefits, such as paid overtime and annual bonuses, • Flexible working arrangements and 25 days holiday plus bank holidays, • Excellent site facilities, including subsidised meals, free parking, etc. Due to the nature of work undertaken at our client's site, incumbents of these positions are required to meet special nationality rules and therefore these vacancies are only open to sole British Citizens. Applicants who meet this criterion will also be required to undergo security clearance vetting, if not already security cleared to a minimum SC level. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days, please presume your application has been unsuccessful on this occasion. This is a permanent position.

A fantastic opportunity has arisen for an Electronics Manufacturing Support Engineer (RF Systems) to join a defence organisation within a specialist seeker systems division to support the transition of complex RF and dual-mode products from design into full-rate production. This role performs the duties of the Electronics Manufacturing Support Engineer (RF Systems) and reports to the senior engineering leadership within the seeker manufacturing support function. Key Responsibilities: • Act as the primary interface between design engineering teams and manufacturing to support the transition of seeker products into series production, • Provide engineering support to resolve manufacturing issues, non-conformances, and production-related technical queries, • Work closely with manufacturing teams to identify process improvements and drive increased production yield and product quality, • Support RF assembly and test-related problem solving across complex electronic sub-systems, • Liaise with internal and external suppliers to ensure continuity of supply for critical sub-assemblies, • Support obsolescence management activities by feeding technical input back into the design organisation, • Contribute to continuous improvement initiatives across manufacturing processes and product build quality, • Maintain production schedules by ensuring timely resolution of engineering issues affecting build or test The ideal candidate would have: • Background in electronics engineering with exposure to RF systems, assembly, integration, or test environments, • Experience working within a manufacturing, production support, or NPI environment, • Strong problem-solving ability when dealing with complex electronic system issues, • Experience interfacing between design and manufacturing teams or equivalent cross-functional environments, • Understanding of production test processes, fault diagnosis, and non-conformance management, • Ability to work independently and manage workload effectively in a high-paced environment, • Exposure to high-reliability or regulated engineering sectors such as aerospace, defence, or similar The ideal candidate must have: • Solid electronics engineering background, • Practical experience in manufacturing support, test engineering, or production engineering roles, • Understanding of RF electronics assembly and test principles, • Ability to investigate and resolve technical production issues, • Strong communication skills with the ability to engage across engineering and manufacturing teams, • Experience working to tight production schedules and delivering under time constraints Benefits package includes: • Company performance bonus scheme, • Employer pension contribution of up to 14% total (combined employee and employer), • Paid overtime, • Flexible working arrangements including up to 15 days flexi leave, • 25 days annual leave plus option to purchase additional holiday, • Relocation support where applicable, • Subsidised on-site catering facilities, • Free on-site parking, • Strong career development and progression opportunities within a high-technology engineering environment If this role looks like your next challenge, please contact Keelan ASAP or apply via this advert! Please note that due to the nature of the client’s business, only candidates who currently hold full British Citizenship (without limitations) / Dual Nationality (inclusive of British Citizenship) will be considered. We endeavour to reply to every candidate, every time but if you haven’t heard back within 10 days, please understand that you have unfortunately been unsuccessful for this position, or the position has been filled. Please call the office or send an email to discuss other potential positions.

Manufacturing Engineer 12 Month Contract Based in Bolton Offering circa £35ph Inside IR35 Eligible for SC clearance Are you an experienced Manufacturing Engineer? Do hold a Level 3 Apprenticeship or BEng? Are you well experienced with SAP? Are you looking to work with an industry-leading company? If your answers are yes to these, then this could be the role for! As the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved with the assembly manufacturing facility with a key focus to ensure that the products are built efficiently. to this end, you will be carrying out activities including: • Compilation and update of Manufacturing Instructions., • Design, Commissioning, and proving of associated tooling., • Support the industrial validation process through the use of FMEA’s, FAI’s etc., • Resolution of technical problems that may arise during the manufacturing process., • Route card changes as a result or rework activities., • Management of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions., • BEng in relevant Engineering Degree, • Have the ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions for both Skilled and Semi-Skilled operators., • Have experience in Electronic subassembly manufacture through to System level builds., • Have experience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems., • Must be able to work within, and contribute to a team environment., • Recognise and understand customer requirements, and respond to them., • Understand and work with Company Processes and Procedures., • Have the ability to communicate both within the working group and at various levels of the organisation., • Manual handling training., • ESD training. If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Production Test Engineer 12-month contract Based in Bolton Offering £37ph Inside IR35 Are you an experienced Test Engineer? Do you have experience testing down to component level? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Providing test engineering support to operators on the shopfloor, • Testing and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level, • Generating test specifications, operator instructions, and technical reports - based on higher-level requirements and information, • Identify remedial and corrective actions, • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations Your skillset may include: • A good understanding of measurement and test principles, and associated equipment down to component level, • Awareness of electrical/electronic sub-system and system design, integration, and test principles., • An understanding of RF and microwave technology at subsystem level, • An understanding of Environmental testing (including ESS), • Manual handling training, • ESD training If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!

Location: Bolton (2 days per week onsite)\n Duration: 6 month initial contract\nRate: £60ph UMB (Inside IR35)\n\nRole details:\nOur client, a leader in the Defence & Security and Aerospace sectors, is seeking a Test Equipment Obsolescence Manager to join their team in Bolton on a contract basis. This opportunity is perfect for experienced engineers looking to play a pivotal role in supporting production activities within state-of-the-art manufacturing facilities. The role involves engaging closely with the Production Design Support (PDS) team, influencing the design of products and test equipment, and delivering essential support to customers.\n\nKey Responsibilities:\n\nManaging proactive and reporting services\nImplementing strategies for obsolescence management\nConducting technical assessments in collaboration with engineering teams to manage changes\nManaging resources and workload planning \n\nJob Requirements:\n\nExperience in managing obsolescence/change management\nKnowledge and experience of electronic equipment\nAbility to work autonomously, lead work assignments, and engage with stakeholders to ensure successful deliveries\nExperience in preparing bids, controlling costs, and delivering solutions with discretion\nExcellent verbal communication, negotiation, and influencing skills, with the capability to write clear and concise engineering documentation\nExperience working within a multi-disciplinary team and a passion for innovation and collaboration\nAn engineering degree or relevant experience is preferred\n\nIf you are an engineer with significant experience in managing obsolescence within the Defence, Security, or Aerospace sectors, we would love to hear from you. Apply now to join our client's dynamic and talented team in Bolton

Our client, a large Aerospace and Defence supplier is looking for a Production Test Engineer (Electronics) to join them on a contract basis at their site on Bolton.\n\nDue to the nature of the role, applicants must hold the sole British nationality and be eligible to obtain full SC Clearance.\n12-month initial contract.\n£34-£37 p/h Umbrella, inside IR35.\nFully onsite in Bolton.As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.\n\nResponsibilities:\n\nYou will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following:\nProviding test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment.\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level.\nGenerating test specifications, operator instructions and technical reports - based on higher-level requirements and information.\nPromptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures.\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations.Skillset/experience required:\n\nMinimum HNC level of Engineering qualifications or equivalent.\nGood understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level.\nAwareness of electrical/electronic sub-system and system design, integration and test principles.\nGood verbal and written communication skills, including generation of test specifications, operator instructions and technical reports.\nAbility to plan and organise one's work according to assigned priorities

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.\n\nRole: Production Test Engineer - Live Build\n Location: Stevenage - fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£36 per hour via Umbrella, inside IR35\n Clearance: SC required before starting, UK Eyes Only due to project\n\nWhat you'll be doing:\n You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following:\n\nProviding test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment.\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level.\nGenerating test specifications, operator instructions and technical reports - based on higher-level requirements and information.\nPromptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures.\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations.\n Requirements:\n Essential:\n\nMinimum HNC level of Engineering qualifications or equivalent.\nGood understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level.\nAwareness of electrical/electronic sub-system and system design, integration and test principles.\nGood verbal and written communication skills, including generation of test specifications, operator instructions and technical reports.\nAbility to plan and organise one's work according to assigned priorities.\n Advantageous:\n\nKnowledge of RF and Microwave technology at the subsystem level.\nExperience in operating manual and automated test equipment in an Electronics Manufacturing environment.\n\nIf you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Medical Field Service Engineer\n\nBiomedical & Critical Care Equipment\n\nCritical Care & Life Support, Ventilation, Patient Monitoring and all other associated equipment\n\nNorth West based, covering Greater Manchester, Liverpool, Merseyside, Lancashire & Cheshire\n\n£40K - £41K + Car + Excellent benefits package including Healthcare, Contributory Pension Scheme and Full and Comprehensive Manufacturers based Product Training\n\nAn excellent opportunity for an experienced Biomedical Engineer, EBME Engineer, Medical Field Service Engineer, or ex HM Forces Engineer (RAF, Navy or REME), to join a market leader in sophisticated Biomedical and Critical Care Equipment, offering first class product training and opportunities for career development\n\nThe Company - Medical Field Service Engineer, Biomedical & Critical Care\n\nMy client is a leading manufacturer of medical systems. This organisation’s impressive portfolio of products and fully integrated medical systems incorporates many aspects of the healthcare equipment sector and includes medical imaging diagnostics and critical care equipment.\n\nOffering 'best in class' solutions across a wide range of equipment modalities, their success is based upon a commitment to world leading manufacturing facilities, outstanding product innovation, excellent customer care and the recruitment and development of good people. They employ thousands of people globally and are an integral part of an instantly recognisable worldwide technology group.\n\nThe Role - Medical Field Service Engineer, Biomedical & Critical Care\n\nFollowing expansion, they seek to recruit a customer focused and technically motivated Medical Field Service Engineer, responsible for the service, repair, breakdown and maintenance of their range of highly advanced critical care and life support equipment product portfolio, based at hospital and healthcare centres throughout the North West Region.\n\nYour Background - Medical Field Service Engineer, Biomedical & Critical Care\n\nTo be considered for this exciting role, you must be able to demonstrate a strong background working in a high value electronic capital equipment environment. You should be qualified to a minimum ONC or HNC level or above in electronics or another relevant technical discipline.\n\nApplications are encouraged from Service Engineers from a wide range of electronic sectors, including biomedical device, medical equipment, laboratory device, print press, semi-conductor, ex Armed Forces (Radar / Weapons Systems and Biomedical Engineers), industrial / commercial imaging or other areas of electronic capital equipment. You must have impeccable customer service skills to show you can remain professional in customer facing environments.\n\nThe Benefits - Medical Field Service Engineer, Biomedical & Critical Care\n\nIn return, the successful applicant will benefit from first class product training, recognised by the industry, which will run on an ongoing basis as new products are introduced. A generous remuneration package is also guaranteed, including competitive salary, company car, healthcare, contributory pension scheme, phone and laptop, along with the opportunity to progress your career within a market-leading organisation.\n\nThis vacancy is being advertised by TRS Consulting Services Limited. The services advertised by TRS Consulting Services Limited are those of an employment agency and / or employment business

Job Title: Senior Electronics Engineer\nLocation: Bolton, Greater Manchester\nType: Full-time, Permanent\nSalary: up to £55,000 base\nReady to take your engineering career to new heights? We are hiring on behalf of an industry-leading electronics company that designs and manufactures innovative, tailor-made electronic solutions. Based in Bolton, this thriving business is seeking a Senior Electronics Engineer to join its dynamic team and contribute to high-impact, cutting-edge technologies.\nAs a Senior Electronics Engineer, you'll be instrumental in developing advanced hardware systems. You'll work across multidisciplinary teams to bring products from concept through development and into production. This hands-on technical role combines engineering depth with leadership potential—perfect for someone who enjoys mentoring and driving collaboration.\nKey Responsibilities:\n * \n Design hardware systems, schematics, and PCB layouts\n * \n Lead product development projects within structured frameworks\n * \n Translate project requirements into actionable objectives\n * \n Collaborate with teams including Field Ops and Manufacturing\n * \n Support prototyping and New Product Introduction (NPI)\n * \n Maintain documentation and ensure ISO9001 process compliance\n * \n Investigate and integrate emerging technologies with the Tech team\nWhat We Need From You:\n * \n Minimum 5 years of experience in hardware design (ideally using Altium)\n * \n Proven track record in testing and validating hardware components\n * \n Skilled in digital and analogue circuit design, especially microcontrollers\n * \n Understanding of comms protocols like LTE, Ethernet, CANBus, I2C\n * \n Bonus: Familiarity with control systems, sensors, and LCDs\n * \n Comfortable with full lifecycle development and project planning\n * \n Programming experience for microcontrollers (preferred)\nPersonal Traits:\n * \n Strong analytical mindset with a solutions-driven approach\n * \n Adaptable across multiple projects and evolving tech platforms\n * \n Confident communicator who thrives in cross-functional teams\n * \n Passionate mentor and natural team leader\n * \n Detail-focused with enthusiasm for tech innovation\nThis is an exciting opportunity to join a company where creativity fuels progress. This is a space for engineers who love challenging the norm and shaping future-forward products. With a collaborative, supportive culture, the team champions personal growth and big ideas—all while making an impact on the global tech scene.\nPlease note we cannot offer sponsorship for the role.\nIf interested, please send over an updated CV

My client, a world leader in the defence sector, requires an Analogue and Digital Electronic Design Engineer to join their Analogue and Digital Electronics Group, developing and delivering electronic designs for their defence products.\n \n Analogue and Digital Electronic Design Engineer\n \n Role Overview\n \n We are seeking a permanent engineer to design, develop and deliver board-level analogue and digital electronics. The role involves schematic capture, prototyping, functional testing and proving activities, as well as working with other teams on the integration of electronics into the product. You will apply circuit simulation and DFMEA techniques to ensure robust electronics design and support the product lifecycle from feasibility to production.\n \n Key Responsibilities\n \nBoard-level analogue and digital design\nSchematic capture and prototyping\nFunctional testing and validation\nIntegration with multi-disciplinary teams\nApplication of circuit simulation and DFMEA techniques\n Requirements\n \nQualifications in Electronic Engineering, such as HND or degree level\nExperience in electronic design and development\nExperience in a manufacturing environment, supporting and resolving manufacturing issues and helping implement Design for Manufacture improvements into the design.\nThe ability to investigate and find Root Causes of design related issues and suggest corrective actions.\nKnowledge of a range of electronic technologies\nAbility to work within multi-disciplinary teams\n Location: Bolton, Lancashire\n Hybrid working: Circa 3-4 days on-site\n Salary: Up to £48,000 (based on experience) plus paid overtime, flexi leave, annual bonus and other benefits.\n \n PLEASE NOTE: Due to the nature of work at our client’s site, these vacancies are only open to British Citizens who hold SC clearance or can obtain it.\n \n This is a permanent role.\n \n Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you do not hear from us within seven working days, please presume your application has been unsuccessful on this occasion. You are free to resubmit your CV or details in the future, and we shall assess your suitability then

Test Equipment Design Support Engineer - 3390-1\n\nInitial 6-month contract\nOnsite in Bolton\nup to £65ph, UMB. inside IR35\nSC, can start on BPSS - UKEO\n\nOur client, a specialist in the Defence & Security sector, is currently seeking two Test Equipment Design Support Engineers to join their team on an initial 6-month contract basis. This role offers an exciting opportunity to play a pivotal role in supporting production activities within state-of-the-art manufacturing facilities.\n\nKey Responsibilities:\n\nActing as the interface between design teams and manufacturing teams, providing knowledge and support.\nFocusing primarily on highly advanced module missile programmes and subsystems, with opportunities to work on launcher assemblies.\nEngaging in the core disciplines of electronic design engineering, with scope for personal growth and development in other electronics areas.\n\nJob Requirements:\n\nExperience in designing products/systems and/or providing support to designs through the manufacturing phase of the product lifecycle.\nProven expertise in one or more of the following disciplines: \nDigital and Analogue electronics\nPower Electronics\nRF & Antenna\nInterconnects\nSafety Electronics\nTest Systems\nSchematic design\nPCB Design\nAdherence to BS EN Standards\nDegree qualified or equivalent industry experience.\nExcellent verbal communication, negotiation, and influencing skills.\nStrong ability to write clear and concise engineering documentation.\nExperience of working within a multi-disciplinary team, with a passion for innovation and collaboration.\nCapability to manage discrete work packages, control costs, and deliver solutions.\nInvestigative skills to determine Root Causes of design-related issues and propose robust Corrective Actions.\nProven track record of on-time delivery and good communication skills.\nExperience in supporting manufacturing and resolving manufacturing issues is advantageous, but not essential.\nIf you are an experienced Electronic Design Engineer looking to take on a new and challenging opportunity within the Defence & Security industry, we would love to hear from you. Apply now to join our client's dynamic team

Supplier Quality Engineer\n\n6 month contract\n\nBased in Bolton - hybrid\n\nOffering £45ph Inside IR35\n\nDo you have experience with AS9100 standards?\n\nDo you have quality experience in Manufacturing and Supply Chain environments?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nComplete scheduled Quality Assurance audits at suppliers using standardised tools \nConduct thorough verification/inspection of products to ensure they meet the required quality standards\nIdentify and document any non-conformities in the manufacturing process and deviations from the product specifications\nMaintain accurate and organised records of all quality control activities\nCommunicate findings to relevant departments/stakeholders\nWork cross-functionally to implement root cause corrective actions at supplier\nContribute to continuous improvement initiatives to enhance the quality of our products\nParticipate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers\nProvide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders \n\nYour skillset may include:\n\nTrained auditor to AS9100\nExperienced in conducting Quality Audits & surveillance\nQuality experience within Mechanical, Manufacturing or Electronic Engineering\nProven track record in Quality, Supply Chain or Manufacturing\nDefence, automotive, or aerospace industry experience\nFamiliar with GD&T and able to use a variety of metrology equipment \nQA problem-solving and improvement methods (8D, RCA, DMAIC, etc.)\nKnowledge of the product lifecycle management\nAnalytical skills; ability to run reports in Excel, use SAP QM system, and document management tools\nContinuous improvement awareness\nExperience is NADCAP \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nSupplier Quality Engineer\n\n6 month contract\n\nBased in Bolton - hybrid\n\nOffering £45ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Manufacturing Engineer\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £35ph Inside IR35\n\nAre you an experienced Manufacturing Engineer?\n\nDo you hold an Apprenticeship and NVQ/SVQ Level 3?\n\nAre you experienced with SAP?\n\nAre you looking to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for!\n\nAs the Manufacturing Engineer, you will be working alongside a market-leading defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nCompilation and update of Manufacturing Instructions.\nDesign, Commissioning, and proving of associated tooling.\nSupport the industrial validation process through the use of FMEA's, FAI's etc.\nResolution of technical problems that may arise during the manufacturing process.\nRoute card changes as a result or rework activities.\nManagement of Configuration Control by the embodiment of Design Modifications into the Manufacturing Instructions.\nSupport to the Non-Conformance Process using SAP.Your skillset may include:\n\nFormal technical Engineering/Craft Apprenticeship to NVQ Level 3/TR23/TR21, with a Formal further education certificate to HNC or equivalent in a relevant subject\nSAP experience\nThe ability to interpret Design Drawings with a view to producing Manufacturing Build Instructions\nExperience in Electronic subassembly manufacture through to System level builds\nExperience and knowledge of the assembly process for small/miniature Electro-Mechanical Actuation Systems\nManual handling training.\nESD training. \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nManufacturing Engineer\n\n12 Month Contract\n\nBased in Bolton\n\nOffering £35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Production Test Engineer\n\n12-month contract\n\nBased in Bolton\n\nOffering £37ph Inside IR35\n\nAre you an experienced Test Engineer?\n\nDo you have experience testing down to component level?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Production Test Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nProviding test engineering support to operators on the shopfloor\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies, and circuit cards down to component level\nGenerating test specifications, operator instructions, and technical reports - based on higher-level requirements and information\nIdentify remedial and corrective actions\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations \n\nYour skillset may include:\n\nA good understanding of measurement and test principles, and associated equipment down to component level\nAwareness of electrical/electronic sub-system and system design, integration, and test principles.\nAn understanding of RF and microwave technology at subsystem level\nAn understanding of Environmental testing (including ESS)\nManual handling training\nESD training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nProduction Test Engineer\n\n12-month contract\n\nBased in Bolton\n\nOffering £37ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Guidant Global is proud to partner with a leading UK Ministry of Defence organisation to recruit an experienced Production Test Engineer with a strong Electronic/Electrical engineering background. Deliver Test Engineering support from concept through to Production Readiness and operational release.

Guidant Global is partnering with a leading UK defence organisation to recruit a hands on Electronics Test Engineer to support the manufacturing test and fault diagnosis of complex electrical and electronic assemblies. This is a practical, production based role focused on diagnosing faults down to c

The successful candidate will provide test engineering support for complex electrical/electronic systems, generate technical documents, and work on various testing technologies. A leading recruitment company is seeking a Mid-Senior Level Test Engineer for a 12-month contract based in Bolton, England

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract. Rate: £60.00 per hour Location: Stevenage or Bolton (depending on your preference) Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeks Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at time and a quarter Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Missile Test Architect Job Description: The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and reporting into the Chief Design Engineer The department is responsible for the test architecture of our missiles, specifying and analysing the missile built in test, specifying the production testing requirements and managing the specification and delivery of the missile test equipment. Responsibilities: Responsible for defining and implementing the project test strategy Responsible for defining and implementing the project BIT architecture including coverage requirements, BIT timings and system level BIT routines. Responsible for specifying the missile factory pass out testing used to ensure correct build of our product, supporting the manufacturing team with identifying the optimal test stages during production. Responsible for specifying the in service test routines on our missiles. Responsible for generating and managing compliance to the lower level test requirements placed upon design teams including test access needs, BIT coverage/timings and factory test functionality. Responsible for analysing and modelling our system to understand the test coverage and generate diagnostic instructions. Responsible for proposing and recommending, with the Chief Design Engineer, the cost vs test coverage trade-offs. Responsible for producing and maintaining plans for activities within their sphere of responsibility. Skillset/experience required: Ideally educated to degree level with substantial experience of test, electrical or electronic engineering, ideally including at least one of the following: Digital electronics and microprocessor systems. Analogue electronics. Electronics testing. Test equipment design. Good understanding of: Experience in requirements capture. Project management and planning. Stakeholder management. TPBN1_UKTJ

Job Description Test Equipment Design Support Engineer Location: Bolton Working pattern: On site based, option for compressed week Duration: 6 Months Rate: £6 ph Umbrella We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of produ

Our client is seeking an experienced Development and Production Test Engineer with a strong background in Electronic/Electrical engineering. Deliver Test Engineering support from concept through to Production Readiness and operational release. Implement corrective actions promptly to maintain produc

A leading defence organisation in Bolton is seeking an experienced Electronic Design Engineer to support manufacturing activities. Ideal candidates will have a degree or equivalent experience, as well as skills in analogue and digital electronics.

A prestigious Ministry of Defence organisation in Bolton is seeking an experienced Development and Production Test Engineer. This critical role involves providing technical support for testing electrical/electronic sub-systems during production. The ideal candidate should have a minimum HNC in Engin

The role will be responsible for Technical support to the manufacturing test of weapons sub-systems in production and development test and diagnostics of complex weapons at system and Subsystem level. Support Test Facility introduction and ensure that configuration control of equipment and facilitie

A Bachelor's degree in Electronic Engineering or a related field and strong experience in electronic design are required. A leading defense company based in Bolton seeks an experienced Electronic Systems Engineer.

Morson Talent is seeking Test Engineering support in Bolton for a long-term contract in the defence sector. Responsibilities include providing engineering support, diagnosing test hardware issues, and ensuring production continuity.

Electus Recruitment is looking for an Analogue and Digital Electronic Design Engineer in Bolton, UK, to design and develop electronic solutions for defence products.This permanent role involves schematic capture, prototyping, and working closely with teams on integration tasks.Candidates should poss

A leading global distributor of electronic components seeks a Field Application Engineer to promote its product portfolio and support technical solutions in the UK.The role involves driving demand creation, collaborating with sales, and delivering technical presentations.Candidates should have a deg

MBDA in Bolton is seeking a Principal Test Engineer to support test system introduction for electrical/electronic weapon systems. The role involves providing engineering support throughout the design and development phases, ensuring production readiness and managing testing processes. Candidates sho

A leading defence company in Bolton is seeking an experienced Electronic Engineer with a strong background in RF engineering.

A prominent engineering company in Bolton is seeking a Contract Production Test Engineer. This role involves providing vital test engineering support during the production of complex electrical and electronic systems.

A leading technology company in Bolton is seeking a Production Test Engineer for a 12-month contract.You will test and diagnose complex electrical and electronic systems and generate specifications and reports.The ideal candidate has a good understanding of measurement principles and RF technology,

The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. We have an exciting opportunity for an experienced Electronic Design Engineer to join our team and play a leading role in

Bachelor’s degree (or higher) in Electronic Engineering, Electrical Engineering or a related discipline. We’re looking for a systems‑focused electronics engineer who thrives on turning complex functional requirements into fully integrated hardware solutions, from early concept through to produ

Analogue and Digital Electronics Group, developing and delivering electronic designs for their defence products. Qualifications in Electronic Engineering, such as HND or degree level. Analogue and Digital Electronic Design Engineer.

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

This role provides a unique chance to shape how MBDA undertakes production testing. Salary: Circa £50,000 depending on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking. Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more.The opportunity: This opportunity is for a Principal Test Engineer to join the Manufacturing organisation supporting test system introduction and test and diagnostics of electrical/electronic weapon systems and sub-assemblies during the development / early production phase. You will work as part of the Manufacturing UK Test Engineering function, responsible for development testing and ensuring production readiness of new products and their test solutions. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensure that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic weapon systems, sub-assemblies and circuit cards, with diagnosis of development test failures down to circuit card and potentially component level, including identification of proposed remedial and corrective actions. Working closely with Operations, design teams and other stakeholders to overcome any technical challenges. Providing technical support and advice to the Test Engineering Team Lead and guiding and mentoring less experienced test engineers within the team.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of personnel ranging from apprentices and graduate engineers through to experienced technical practitioners, all striving to deliver technical excellence across a number of different products in development and production. What we're looking for from you: Minimum Qualification Level Level 4 or greater in Engineering (preferably Electrical, Electronic, Aerospace or Mechanical), Physics or Maths. Must include modules for Electronic Principles (digital or analogue) or Electrical Principles. Several years' experience in related industry / manufacturing. A good understanding of electrical/electronic and RF measurement and test principles and test equipment, as well as systems-level functional testing. Experience of the product development lifecycle and supporting processes, in an electronics manufacturing environment. Significant experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives, whilst being available to support others. Good verbal and written communication skills, including working within a team, generation of test specifications, operator instructions and technical reports based on higher-level requirements.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract. This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background. Rate: £65.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at ‘time and a quarter’ Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). The department are happy for a Compressed week to be worked, for 4 days per week (Monday to Thursday) Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Test Equipment Design Support Engineer Job Description: We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. Responsibilities: You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines:- Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. You’ll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions. Finally, we are looking for someone who has a record of accomplishment of on-time delivery along with good verbal and written communication skills

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Test Equipment Design Support Engineer subcontractors on an initial 6 month contract. This role would suit a candidate who comes from a strong Electronics Engineer OR Production Support Engineer OR Test Systems Designer OR Electronics Design Engineer background. Rate: £65.00 per hour Overtime Rate: Hours worked over the standard 37 hours per week, will be paid at time and a quarter Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). The department are happy for a Compressed week to be worked, for 4 days per week (Monday to Thursday) Duration: 6 Months with very likely extension. Contracts are often ongoing and long-term thereafter. IR35 status: Inside IR35 (Umbrella) Test Equipment Design Support Engineer Job Description: We have a phenomenal opportunity for experienced Electronic Design Engineers to play a leading role in the support of production activities at our state-of-the-art manufacturing facilities. Working within Production Design Support (PDS) is a highly rewarding role as you not only see designs coming to life in the manufacturing environment but you can help to shape the design of the products and test equipment, delivering support to our customers. Responsibilities: You will act as the interface between our design teams and our manufacturing teams while working alongside other support engineers to provide knowledge and support. Whilst the primary aim is focused on highly advanced module missile programmes and subsystems, there is also scope to work on other unique opportunities including support to launcher assemblies. The role offers the candidate a true engineering challenge in their core discipline(s), whilst providing scope for personal growth and development in other areas of electronics. Skillset/experience required: To be suitable for this role, Individuals will be able to demonstrate a number of the following attributes: Degree qualified (or equivalent industry experience) with experience of designing product/systems and/or providing support to designs through the manufacturing phase of the product lifecycle. Proven experience in the design of one or more of the following disciplines:- Digital and Analogue electronics Power Electronics RF & Antenna Interconnects Safety Electronics Test Systems Schematic design PCB Design Adherence to BS EN Standards Excellent verbal communication, negotiation and influencing skills with the capability to write clear and concise engineering documentation. Experience of working within a multi-disciplinary team, with an awareness of the challenges and opportunities that this may bring and a passion for innovation and collaboration. Youll be prepared to work autonomously if needed, lead the delivery of your work assignments, and actively engage with stakeholders to ensure successful delivery of your outputs. Manage discreet work packages preparing bids, controlling costs and delivering solutions. Experience in supporting manufacturing and resolving manufacturing issues is an advantage, but not essential. Investigative skills to be able to find Root Causes of design related issues and propose robust Corrective Actions. Finally, we are looking for someone who has a record of accomplishment of on-time delivery along with good verbal and written communication skills. TPBN1_UKTJ

Join MBDA UK Ltd as a Senior Test Engineer and become an integral part of our Manufacturing team. This role presents an outstanding chance to contribute to the testing of our products. By joining us, you will have the opportunity to play a crucial role in upholding the highest standards of quality and reliability for our products. Salary: Circa £45,000 dependent on experience Dynamic (hybrid) working: 4-5 days per week on-site due to workload classification Security Clearance: British Citizen only. Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments. Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Training and Development: Excellent career progression, training and career development opportunitiesThe opportunity: This opportunity is for a Test Engineer to join the Manufacturing team supporting test and diagnostics of electrical/electronic sub-systems and circuit cards during all phases of the product lifecycle. You will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations. Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions. Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level. Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges. Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different missile systems in development and production. What we're looking for from you: Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test. A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies. Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment. Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions. The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives. Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements. Proven analytical and problem solving skills, with strong attention to detail.Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

Bolton An exciting role has become available in our Test Architect team as a Technical expert involved in all aspects of the Missile Test process. If you have experience Electronic circuit design, testing and failure analysis techniques along with Test equipment design then this could be just the role for you! Salary: Circa £72 ,000 depending on experience Dynamic (hybrid) working: 3 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship . Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 27% of base salary Car allowance: £300 per month Pension: maximum total (employer and employee) contribution of up to 14% Private Medical Insurance Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As the Missile Test and Testability Expert you will be reporting in to the Test and Testability Department Head and, from a Project perspective, into the Project Chief Design Engineer. As Test and Testability Architects (TTA), we are involved in all aspects of the Missile Test process - from the early feasibility studies to series production and in-service support. As a Subject Matter Expert for Missile Test and Testability Architecture you will participate in range of missile programmes using your experience and expertise to improve the definition of test equipment technical requirements by focussing on key areas and removing waste. You'll be managing definition of the project test strategy, Definition of Project BIT architecture including coverage requirements and improving the way we write our specifications across all projects. As a key member on the team you'll be assessing and recommending improvements to our ways of working across TTA and lead the analysis of production test data to spot trends and diagnose failures. There will also be a need for you to lead the analysis and modelling our system to understand the test coverage and generate diagnostic instructions. Day to day you could also be involved in - Participating and supporting Red-Team reviews and activities into critical issues during development and manufacture. Supporting new product bid activities. Identify, document and deploy best practice across the department and within projects. Mentor and actively support members of the Test & Testability department. Lead / participate in roadmap development activities.What we're looking for from you: Educated to degree level (or equivalent) with significant experience of electronic test at all stages of project lifecycle, including: Electronic circuit design, testing and failure analysis techniques. Test equipment design. Experience in requirements capture. Project management and planning. Provide technical leadership to all Test related issues across design projects with proven experience in Test Equipment requirements capture and specification. Experience in DfT and testability Proven ability to influence senior stakeholders within the business relating to technical direction Support departmental strategy and support the department head with recruitment of the right people into the team. Strong interpersonal and well developed communication skills (written & verbal).Willingness to travel when required (UK and EU). Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SF1