Trabajos engineer electronic en PortsmouthCrear alertas

JOB DESCRIPTIONESROE has vacancies in their small company of experts working in the area of Electronic Warfare, in particular, the area of Electronic Surveillance Measures (ESM) and Radar Identification.The successful applicant/s will be involved in the development of ESROEs MicroESM system/s and associated software applications.The roles are varied and can be biased towards software development or hardware tasks depending on skills and experience.Work may include a variety of software development projects, investigations into current performances, further algorithm development, user interface design and development, data analysis, writing software documentation, preparation of releases for customers, system testing and customer support. There is also the potential to work on some of ESROEs other key products, that of its artificial intelligence software for radar classification and for radar identification performance analysis.The hardware tasks require having general electronic engineering skills and firm radio frequency (RF) engineering knowledge or experience. Work may include bench and field testing of the current product, including the development of test signal generation and test environments plus analysis of the results achieved. Tasks may also involve work to support new ESM receiver products.There is the opportunity for short trips away in the UK and abroad with the team participating in hardware and software trials and demonstrations.ESROE are looking for someone who is driven, creative, has strong mathematical skills, has exceptional attention to detail , has excellent team working skills and can also confidently work independently.Our working environment is friendly, hard-working and inspiring. Currently being a small company, there is the potential for you to be a significant part of it.Work is office based and these roles are not suitable for remote or hybrid working.Due to the nature of this position, we require you to have, or be willing and eligible to achieve SC clearance. The work requires you to be a Sole UK National.Essential :You must have an excellent honours degree in a relevant subject such as Electronic Engineering, Computer Science, Physics, Mathematics or similar.You must have studied, or have practical/industry experience of software development.You must have a strong interest i n Defence Technology.You must have a strong interest in gaining good knowledge of ESM, its software and hardware.You must have a strong desire to work in a small company.You must have excellent ability to learn new skills with minimal supervision.You must have the ability to be persistent and thorough in investigative tasks.HOW TO APPLYPlease email Ann at ESROE (use contact email address) to request our initial questionnaire for applicants. Quote job reference ESROE2026R. Note that applications will only be considered on completion and return of our questionnaire.TPBN1_UKTJ

Job Title: SolidWorks Mechanical Designer Job Type: Contract Term: 2 months (potential for extension) Start: Immediately Hourly Rate: £40 per hour Location: Herefordshire Onsite / Remote: Remote (with occasional visit to office) IR35 Status: Outside Our client is a long-established Engineering Design Consultancy, based in Herefordshire with strong skills in Mechanical and Electronic Engineering, Product Design and Analysis. Due to high workloads they are looking for an experienced SolidWorks Mechanical Design Engineer to join the team in an initial 2 month contract term. The ideal candidate will be a well rounded, mechanical designer with experience in design processes such as aluminium die casting and plastic injection moulding. The ideal candidate will be able to provide their own SolidWorks licence and workstation if working remotely. The client can provide this but you'd then need to be onsite. Skills and experience: Likely holds a relevant degree, though a strong track record and the right attitude are considered more valuable than formal qualifications. Demonstrated experience in leading the end-to-end design and development of mechanical components, assemblies, and systems-from concept through to production. Proficient in producing detailed 3D CAD models using SolidWorks, along with comprehensive engineering drawings and supporting technical documentation. Ensures all designs adhere to applicable industry standards and regulatory requirements. Collaborates effectively with cross-functional teams-including electrical, software, manufacturing, and quality assurance-to achieve fully integrated product solutions.

About Us _ is not your regular deep-tech startup. We are creating the next-generation AI platform to support anyone who wants to help advancing humanity and improve the world around us. In just four years, we have raised a total of $120 million and have built a world-class team of 220+ employees (including 49+ PhDs with more than 40,000 citations), both remotely from 17 different countries and with offices in Belgium, France, Switzerland, Italy, the UK, headquartered at the High Tech Campus in Eindhoven, Netherlands. We have also launched our Metis™ AI Platform, which achieves a 3-5x increase in efficiency and performance, and have visibility into a strong business pipeline exceeding $100 million. Our unwavering commitment to innovation has firmly established us as a global industry pioneer. Are you up for the challenge? Position Overview As a Logical Design Engineer, you will join a team responsible for the micro-architecture, implementation and execution of in-house designed AI products. Your role will be critical in achieving the highest level of quality and performance as well as ensuring continued innovation in both design and design flow. This is an opportunity to work with cutting-edge technology and a dedicated team of professionals who share your passion for pushing the boundaries of what's possible. Key responsibilities: Collaborate with cross-functional teams to clarify and comprehend intricate design specifications and requirements. Architect and implement advanced micro-architectures from high-level specifications for silicon components, adhering to performance, power, and area (PPA) metrics. Employ industry-standard design tools and methodologies to fashion and optimize digital logic circuits. Conduct block and system-level RTL coding, ensuring optimal performance, power, and area (PPA) metrics. Integrate various IPs/Sub IPs into the top-level SoC. Perform static checks (lint, cdc, equivalence checks) to enhance the quality of the RTL. Automate tasks using scripting for efficiency gains. Undertake comprehensive functional verification and collaborate closely with verification engineers to ensure the correctness of the design. Actively engage in design reviews, contributing technical expertise to enhance overall design quality. Work collaboratively with physical design engineers to address design-for-manufacturability (DFM) and design-for-test (DFT) considerations. Qualifications / skills Education: A degree in electronics engineering, electrical engineering or computer science or other relevant discipline. Experience: A minimum of 5 years of experience and proven expertise in silicon logical design, with a successful track record in RTL coding and synthesis, digital design, SoC, and integration of 3rd-party IPs (PCIe, LPDDR), with fluency in Verilog. Expertise: Mastery of industry-standard Electronic Design Automation (EDA) tools for design and verification. Deep understanding of intricate digital design principles, covering clock domain crossing, low-power design, and timing closure. Scripting: Proficiency in scripting languages such as Python, shell or Tcl for automation. Collaboration / Team Player: Demonstrated ability to work closely with architecture, verification, physical design and software teams to ensure comprehensive verification coverage. Problem Solving: Strong analytical and problem-solving skills. Communication: Excellent written and verbal communication skills in English. Comfortable working with a team spread across 15 countries. Location We offer a flexible working arrangement, with options to: Work from one of our Axelera AI offices (Leuven in Belgium, Amsterdam and Eindhoven in the Netherlands, Zurich in Switzerland, Florence and Milan in Italy or Bristol in the United Kingdom) if you're already based in the vicinity. Work fully remotely from any European country (incl. the UK) you are already in. Relocate with us and work from Italy (Florence or Milan) or the Netherlands (Amsterdam or Eindhoven). What we offer This is your chance to shape and be part of a dynamic, fast-growing, international organization. We offer an attractive compensation package, including a pension plan, extensive employee insurances and the option to get company shares. An open culture that supports creativity and continual innovation is awaiting you. Collaborative ownership and freedom with responsibility is characteristic for the way we act and work as a team. At Axelera AI, we wholeheartedly embrace equal opportunity and hold diversity in the highest regard. Our steadfast commitment is to cultivate a warm and inclusive environment that empowers and celebrates every member of our team. We welcome applicants from all backgrounds to join us in shaping the future of AI.

About UsHydro International, a CRH Company, is a leading global provider of advanced products, services and expertise to help municipal, industrial and construction customers to improve their water management processes, increase operational performance and reduce environmental impact.With over 40 years of experience and a reputation for engineering excellence, businesses, and public bodies all over the world rely on our products, services and integrated solutions to reduce flood risk, improve water treatment and protect the environment from water pollution. We have a network of over 80 distribution partners and serve customers in more than 40 countries.As part of CRH Infrastructure Products, we are leading the water management industry with innovative, sustainable solutions and a safety-first mindset.working within Hydro International's UK Wastewater Services (UKWWS) team. We support water utility companies by improving sewage sites across the United Kingdom.We are looking for an experienced/qualified Mechanical Engineer to join us working within Hydro International's UK Wastewater Services (UKWWS) team supporting water utility companies by improving sewage sites across the United Kingdom.In this job you willInstall, commission, set up and test water filtration systems on sewage sites.Carry out site inspections and fault finding and compile survey reports for quotation purposes.Access and interpret technical instructions using mobile electronic equipment.Work at heights, in confined spaces and outside on sites connected with Wastewater (sewage).-Work away from home on a regular basis, requiring overnight stays.Work in some of our workshops across the country on occasion.- Work as a team with other staff and trades within the business.About YouCurrent Valid Driving LicenseCity & Guilds QualifiedServed a recognised mechanical apprenticeshipWhy work for us?Competitive SalariesAnnual Discretionary BonusOvernight subsistence allowanceAdditional overnight/stay away payment2 x Annual salary Life CoverPensionSick pay policyMinimum of 23 days holiday per annum + Bank HolidaysFlu VaccinesDSE Eye TestsMental Health First Aiders & Support programmesTraining & DevelopmentWhy TarmacWe don't just offer a job, we offer a career.Alongside this role, you'll have access to industry-leading rewards, development opportunities, and a culture that puts people first, including:Bonus schemeEnhanced holiday entitlementContributory pension schemeAccess to the Tarmac Reward website with discounts on retailers, holidays, etc.Access to our Employee Assistance helpline for free and confidential adviceAccess to join our Employee Communities (employee networks) we currently have nine communities inc.(REACH) Religious, Ethnic, Cultural Heritage, LGBTQ+, Parents & carers, Ability, Wellbeing, Female voice and menopauseTraining and development opportunitiesTarmac is committed to being a Forces-friendly employer.If youre coming from a military background, well support your transition and help you build a successful career with us.Were proud to be part of CRH, and even prouder to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for everyone.If you need any reasonable adjustments during the recruitment process, just let us know, were here to support you.Ready to build your future?Click Apply to get started. Please note: we sometimes close roles early due to high interest, so dont wait too long!#Tarmac #TarmacCareersTarmac Trading LimitedTPBN1_UKTJ

Amour Recruitment are pleased to be recruiting for an experienced Hardware Installation Engineer to join our wonderful client, based in Portsmouth. \n In this exciting role, you'll join an existing hardware install team, supporting with the installation, updating, decommissioning and diagnosis of various IT hardware infrastructure across the UK. \n You'll need to be flexible, as the project locations and hardware requirements will vary on a project by project basis. \n This role is offered as an initial three month temp to perm contract. \n Responsibilities \n\n • Install and configure computer hardware components, including servers, workstations, networking equipment, and peripherals.\n, • Interpret schematics, technical diagrams, and wiring diagrams to ensure accurate installation procedures.\n, • Conduct routine maintenance and troubleshooting of hardware systems to ensure optimal performance.\n, • Repair or replace faulty equipment, including mechanical parts and electronic components.\n, • Assist with the setup of computer networking infrastructure such as routers, switches, and wireless access points.\n, • Document installation processes, maintenance activities, and repairs accurately for record-keeping purposes.\n\n Skills \n\n • Proficiency in working with computer hardware components and understanding their functions.\n, • Ability to read and interpret schematics, technical diagrams, and wiring layouts effectively.\n, • Experience in computer repair, maintenance, and troubleshooting across various hardware platforms.\n, • Knowledge of computer networking principles including installation of routers, switches, and wireless devices.\n, • Familiarity with equipment repair procedures for electronic and mechanical systems.\n, • Excellent organisational skills with the ability to prioritise tasks efficiently in a fast-paced environment.\n, • Strong communication skills to liaise effectively with clients and team members.\n\n Requirements: \n\n • Previous experience working hands-on with IT installations is essential.\n, • Previous experience working on networking infrastructure is ideal, though not essential.\n, • Full UK Drivers License\n\n Hours: Monday to Friday 9:00 - 17:30 (With flexibility to meet specific project demands) \n Salary: £35,000 circa £18 Hour \n If you're an experienced IT engineer, we would love to hear from you! Please apply and the Amour Recruitment team will be in touch!

Job Title: Electronic Design EngineerLocation: PortsmouthSalary: £50,000 - £60,000 (Depending on Experience)Note: All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future.Overview:\n\n \n \n \n \n \n We are currently seeking an experienced Electronic Design Engineer with at least 3 years of commercial experience and a strong understanding of electronic design and testing within a manufacturing environment. Experience working within a regulated industry would be highly advantageous. Our client develops advanced electronic systems deployed across the UK and is continuing to expand its engineering team. This is an exciting opportunity to play a key role in the development of next-generation products, while also supporting the enhancement and maintenance of existing systems.Key Responsibilities\n \n • Collaborate with Embedded Software and Electronics Engineers to design, develop, modify, and test both new and existing systems\n, • Design electronic systems and complete products, considering component availability, lifecycle, and long-term reliability\n, • Develop and integrate hardware and software components to improve current platforms and support new product development\n, • Conduct fault-finding and failure analysis activities from PCB level through to complete system level\n, • Use a variety of test and measurement equipment, including oscilloscopes and digital multimeters, to evaluate PCBs and associated electronics\n, • Design, develop, review, and test embedded firmware using C\n, • Design, review, and test electronic hardware, including PCB development\n, • Support the creation of new hardware and software assemblies to enhance both existing and future systems\n Required Skills & Experience\n \n, • Commercial experience with both analogue and digital electronic design\n, • Strong component selection, validation, and testing experience\n, • Understanding of Embedded C development\n, • Knowledge of automated testing methodologies (desirable)\n If you are interested in this opportunity, please apply with your latest CV. Suitable applicants will be contacted with further information.\n \n \n \n \n \n

We’re recruiting an Electronic Design Engineer to join a dynamic electronics company based in Littlehampton. The ideal candidate will have a strong background in electronic design, with hands-on experience in PCB layout and schematics, project management, and overseeing designs from concept through to production. A Bachelor's degree (or equivalent) in Electronic Engineering or a related field is essential This is a great opportunity for a candidate that wants to develop and grow within a business as the company is growing at a very fast pace. As a Design Engineer, your key responsibilities will include: • Designing and developing electronics devices, systems and circuits, • Creating and reviewing design specs and technical documentation, • Working with other departments to define project deliverables and requirements, • Troubleshooting and resolving design and technical issues, • Ensuring all designs comply with relevant safety regulations Requirements: • Bachelors degree or equivalent in Electronic Engineering or similar, • Experience with PCB layout and schematics, • Previous experience working as a Design Engineer, • Strong communication skills both written and verbally, • Proficiency in using design software such as, Eagle, Altium or similar Benefits: • 20 days annual leave + bank holidays + closed over the Christmas period, • Free onsite parking, • Work from home 1x a week, • Yearly bonus scheme This is a full time permanent position working Monday to Thursday 9am to 5:30pm with a 3pm finish on Friday’s. The role is based in Littlehampton. Wild Recruitment Ltd T/A First Recruitment Services is acting as an employment agency in relation to this vacancy.

Role: Quality Assurance Engineer – Medical Devices Type: 6 Month Contract Pay: £40 per hour – Inside IR35 Hours: 09:00 – 17:00 Mon-Fri Location: Fully Remote with occasional visits to Birmingham site Are you a Quality Assurance Engineer contractor looking for your next contract? I’m currently representing my Medical Devices client based in Birmingham who are looking for a Quality Engineer to join them on a contract basis. Quality Engineer - Job Description • Supplier & Purchasing Oversight: Ensure supplier and purchasing processes comply with regulations; develop supporting documents, supplier controls, and quality agreements., • Labelling Compliance: Review and create procedures for product and software labelling to meet all regulatory requirements., • Regulatory Registration Support: Prepare documentation packs for global device registrations; maintain a master list of active registrations and develop related procedures., • Technical Documentation & Risk Management: Maintain regulatory files, support risk management activities, and document process risks per ISO 14971., • Quality Data & Trend Analysis: Develop systems for collecting and analysing quality data to identify trends and drive improvements., • Training Development: Create training materials on applicable regulations and standards and implement a refresher training process for key quality procedures. Project Engineer - Essential Experience/Skills/Qualifications, • Proven experience in quality assurance and regulatory affairs within the medical device sector, including creating procedures and technical documentation., • Strong analytical, problem-solving, and detail-oriented skills with the ability to manage multiple projects and priorities., • In-depth knowledge of international medical device regulations and standards (e.g., MDSAP, EU MDR 2017/745, ISO 13485, ISO 9001, ISO 14971)., • Excellent regulatory writing, communication, and interpersonal collaboration skills., • Proficient in using QMS tools and electronic document management systems; experienced with MS Office, SharePoint, and MS Teams., • Highly organized, professional, and collaborative; effective in team environments and capable of independently planning and managing tasks. If you are a Quality Assurance Engineer and are interested, please apply now with your latest CV.

Fire & Security Project Commissioning Engineer - Scotland and UK Wide based Why Marlowe Fire & Security? As one of the fastest-growing companies in the industry, we pride ourselves on our ability to deliver excellence—from the initial design to long-term maintenance. Our employees are our greatest asset, and we empower them with the tools they need to succeed. With Marlowe Fire & Security, you will enjoy a vibrant company culture, career progression opportunities, and a comprehensive benefits package including a competitive salary, vehicle allowance, and more! Basic Salary – up to £38,000 per annum Overtime, Travel Time circa £ 10,000 per annum Pension, Life Assurance & much more. – Please see our generous remuneration packages below Marlowe Fire & Security’s Project Commissioning Engineer’s Technically engineer, install commission small and large projects across the Marlowe portfolio whilst controlling and planning the projects and commissioning works. Maintain close collaboration with key clients to ensure project milestones and deadlines are achieved, while upholding company standards for profitability, health and safety, and quality assurance. • Commission fire detection and alarm systems in full compliance with relevant industry standards and regulations., • Conduct comprehensive site surveys, installation quality checks, and performance testing to ensure system integrity and functionality., • Provide expert technical support and guidance to field engineers and project teams throughout all phases of delivery., • Ensure full compliance with health and safety legislation and site-specific requirements across all project activities., • Maintain detailed and accurate documentation of commissioning processes, producing clear reports for internal and client use., • Support the delivery of end-user and operational staff training on installed systems, ensuring effective handover and understanding., • Plan, coordinate, and manage labour and materials to meet project deadlines, budgets, and quality expectations., • Offer technical input and oversight on projects, ensuring adherence to specifications and client requirements., • Attend site and client meetings as necessary to support project progress, coordination, and issue resolution., • Provide line management and oversight of assigned engineers and subcontractors, including timesheet and leave management., • Monitor and manage project profitability, regularly reporting progress and financial performance to the Project Manager., • Oversee health and safety compliance across all sites, conducting regular audits and ensuring risk control measures are in place., • Perform hands-on installation and commissioning tasks for systems and minor works as needed., • Uphold Marlowe’s standards for quality, health, safety, and environmental (HSE) compliance across all areas of responsibility. Who We’re Looking For Marlowe Fire & Security consider our people our greatest asset. All we ask is that every Team Member take pride in what they do and demonstrate commitment to delivering the highest level of service to both external and internal customers. Therefore, in addition to having all the usual attributes of a great Marlowe Fire & Security employee, such as; a positive attitude, excellent communication skills, well presented and professional at all times, ability to work alone and as part of a team….. For this specific opportunity, we are looking for candidates who offer: • A minimum of 3 years’ proven experience in the commissioning of security systems., • In-depth technical knowledge of leading industry systems including Galaxy, Gent, Notifier, and Kentec., • NVQ Level 3 in Electrical or Electronic Engineering (or equivalent qualification) is preferred., • Experience in delivering engineering projects across both single and multi-site locations., • Strong technical expertise, complemented by effective interpersonal and communication skills., • Solid understanding of major systems and large-scale project environments, with a focus on quality and compliance. Our Fire Systems Fire: Gent, Notifier, Kentec, Ziton, Advanced, Morley, C-Tec, Protec Our Commitment to Attracting, Rewarding & Retaining Talent At Marlowe Fire & Security, we understand the pivotal role that fair compensation plays in the success of our team. That’s why we’re dedicated to providing exceptional remuneration packages that not only address the challenges of today’s economic landscape, but also include comprehensive benefits and incentives designed to enhance the well-being and prospects of our employees, making their everyday lives more enjoyable and secure. • Competitive Basic Salary – Earn up to £38,000 per annum, with real potential to increase your take-home pay, • Generous Overtime & Travel Time – Boost your earnings by around £10,000 annually, • Generous Pension Scheme – With Royal London, helping you plan for a secure future, • Life Assurance – Peace of mind with coverage at 4x your annual salary, • Paid Annual Leave – Including bank holidays, with extra days for long service (up to 25 days), • Referral Bonus Scheme – Earn up to £1,000 per successful referral, with no limit on how many you can make, • Well-being Support – Access to mental health and well-being resources whenever you need them, • Recognition & Rewards – Be part of a culture that values and celebrates your contributions, • Career Growth – Ongoing training, development, and genuine opportunities for career progression A Little More About Marlowe Fire & Security We operate nationally, across all industries in both commercial and domestic sectors, delivering a fire and security solution that responds to our customers particular needs. Our solutions are developed according to the industries we serve, addressing their unique compliance requirements, supporting them in maintaining their sites security and protecting their people. We have the luxury and benefit of being part of a wider group of businesses within the Fire Protection, Security & Building Management Systems industry, allowing us to share best-practice, learning & development academies, Human Resource specialists and knowledge for constant improvement across the critical service industry. Big enough to provide but small enough to care. Our Business Include: • Marlowe Fire & Security marlowefireandsecurity.com, • Alarm Communications acl.uk.com, • Clymac clymac.co.uk, • FAFS Fire & Security fafsfireandsecurity.com, • Marlowe Kitchen Fire Suppression marlowefireandsecurity.com, • Morgan Fire Protection morganfire.co.uk, • Victory Fire morganfire.co.uk, • Marlowe Smoke Control marlowe-aov.co.uk, • Hadrian Technology marlowefireandsecurity.com Equal Opportunities We strive to create a diverse, inclusive environment to encourage all our employees to be themselves. We celebrate what makes us unique and believe that adopting a culture of inclusion helps us to best serve our customers. We are committed to supporting equal opportunities, please inform us if you require any reasonable adjustments to enable you to participate in the recruitment process. Right to Work Regrettably, we are unable to offer Right to Work Sponsorship. If you do not currently have the Right to Work in the UK or will need additional support to extend your current Right to Work status, your application cannot be considered.

Our engineering clients based close to Fareham have an exciting opportunity for a NPI Engineer to join their growing team.The NPI Engineer will be responsible for the mechanical, electronic and support aspects of validating and introducing new product developments into manufacturing and the supply chain. This includes creating and maintaining accurate work instructions for the production line to ensure consistency of product, developing, building and testing prototype units and evaluating and debugging the design. The role is of a technical nature but cant be completed without cross-functional support so maintaining excellent relationships with these teams is essential.NPI Development:Manage the introduction of new products into production, ensuring manufacturability issues are identified and resolved before full-rate production begins, and reducing risk from design oversights.Support the development of non-recurring engineering (NRE) estimates, including participation in pre-sales design activities to agree the NPI approach and estimate effort, tooling, test equipment and other project costs.Prepare NPI build plans for OIB / pilot builds, including agreed roles, responsibilities, schedule and required resources.Develop detailed work instructions, using build photos and build learning from initial assemblies, to standardise manufacturing methods for new products and engineering changes.Design and develop tooling, fixtures, process FMEAs and supporting documentation in line with project requirements.Participate in design reviews and make practical recommendations to improve manufacturability, simplify assembly and reduce overall cost.Prototyping & AssessmentBuild new products and prototypes with minimal or no prior instruction, in line with customer specifications and quality standards.Work collaboratively with design and production teams to document, build and verify prototype parts, and train manufacturing operators where required.Analyse build and test failures, recommend corrective actions, and assess associated cost, timing and technical risks.Track, record and report bugs, nonconformances and issues identified during prototype, test and NPI builds.Highlight NPI and product risks to the Project Manager and Project Engineers in a timely and structured way.Recommend design or process modifications based on prototype build and test results. Support root cause investigation and feedback of issues into design, quality and production control processes.Required Skills & Responsibilities:Knowledge in electro-mechanical assembly and product build environments.Technically minded, with practical experience supporting prototype, NPI, and production activities.Able to build, test, and debug products in line with customer and quality requirements.Experience producing documentation and work instructionsExposure to Design for manufactureWorking hours: 37.5 hours Monday FridayTPBN1_UKTJ

EMC Test EngineerOrion is working with a market leader that is seeking an EMC Test Engineer to support the qualification and certification of advanced engineering systems. This is a key role focused on ensuring products meet stringent electromagnetic compatibility (EMC) and environmental compliance requirements, contributing directly to successful product qualification and programme delivery.Our client is a leading engineering organisation operating within a highly regulated, safety-critical industry. They specialise in the design, development, testing and support of advanced electronic and mechanical systems used across a range of complex platforms. With a strong focus on innovation, quality and compliance, they work on cutting-edge technologies and deliver solutions that meet rigorous industry standards.Key Responsibilities of the EMC Test EngineerAuthor, develop, and own qualification test plans and procedures, with a strong focus on EMC and environmental testing.Define and execute EMC test strategies covering RF interference, electromagnetic compatibility, and environmental conditions (e.g. temperature extremes, ruggedisation).Perform EMC and environmental test activities and produce comprehensive reports documenting results and compliance outcomes.Manage, organise, and support environmental and EMC testing programmes across multiple projects.Ensure systems meet relevant regulatory and certification standards.Mentor and support junior engineers, including delegating procedural tasks and reviewing/amending their work to support development.Requirements of the EMC Test EngineerProven experience in EMC testing, verification, or environmental qualification.Strong understanding of EMC principles, RF interference, and relevant test standards.Experience within highly regulated industries.Ability to write and review technical documentation (test plans, procedures, reports).Degree in Engineering or a related discipline (or equivalent experience).Benefits for the EMC Test EngineerCompetitive salary and benefits.A competitive annual bonus.Company-wide pension.WFH policy- 1 day a week.If this EMC Test Engineer position is of interest, please click Apply or get in touch with Steven at Orion.TPBN1_UKTJ

IntroductionSaab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training.What you will be part ofSaab is a leading defence and security company with an enduring purpose, to help nations keep their people and society safe.Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world.Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems.Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations.The Role:Join us in creating the most innovative robotic technology for the harshest environment in the deepest oceans and most turbulent waters. We lead the world with the most advanced engineering, electronics and software systems for pioneering electric underwater technology.We don't just create products - we are revolutionising the underwater world. So come and be part of an innovative and agile team that is dedicated to smart and inspired technology that is rapidly changing the future of underwater robotics.This is a new role onsite at our Fareham Campus. Role to engineer test solutions for electro-mechanical products to ensure systems are thoroughly exercised to satisfy product requirements. With a wide ranging remit to manage and execute the full lifecycle of test engineering, from definition of test-cases through development of test tools to the execution of testing. As such it will suit someone with a broad spread of engineering knowledge, imagination and driveKey accountabilities and responsibilities:Lead Test Engineer within the department, to be the guide and support resource for the general Test EngineersLine manager for Test Engineering group - manage out workload within the Test Engineering team and external 3rd parties as requiredAnalyse Master / Systems / Sub-System requirements and conformance specifications to derive test requirementsPlan, design and communicate test cases which verify and validate requirements across a broad spread of electro-mechanical systems for both the development and production lifecycle phasesResponsible for closure of workload packages derived from requirements analysis, management of formal Test Reports and other evidence based materials across the Test Engineering team to support the conclusions of investigationsDefine the design of test jigs, harnesses and software to allow execution of test cases including, where appropriate, automation.Implement data processing/ filtering software in a variety of packages to extract relevant results into databases / analysis software packagesManage the internal test facilities (test tanks, ovens, pools, lifting equipment)Liaise with external test facilities (EMC, vibration, pools, etc)Fault finding and failure analysisDocumentation and presentation of results and findings.Essential Skills:HNC or Degree in a relevant engineering disciplineCompetent in Electrical and Electronic EngineeringPrevious experience in personnel supervision / management, to coach and mentor staff and manage their workloadAbility to work unsupervised to tight timescalesWorking knowledge of Mechanical Engineering principlesWorking knowledge of Software principles in relation to products - embedded and associated tool chainsCompetent and able to use Microsoft Office to a high levelExperienced and high level competence with National Instruments LabView and TestStand software tool chains within a test and measurement environmentExperienced with creating / modifying software scripts / programs e.g. Python, Visual Basic, C, C++, etc.3 years in a test focused role, or within test equipment developmentProven experience in data capture and analysisExpert in the Verification & Validation processes and associated tools and techniquesProven experience working on multi-disciplinary systems (electrical, mechanical, software)Excellent knowledge of test equipment and platformsData capture - loggingCreate high quality test reportsInnovative and creative mind-set with technical awarenessExcellent communicator: both written and verbalEnthusiasm, drive and personality!Desirable:Degree in Electrical and Electronic EngineeringFormal qualification in Mechanical Engineering and/or SoftwareNational Instruments certified developerExperienced with working with system engineering / project management tools - EA / DOORS / etc.Experience in the offshore and/or subsea industryKnowledge of product certification, best-practice and industry standardsKnowledge of compliance standards and certification (CE / DNV)Expert / advanced user of Microsoft Excel.Experience with data archiving / controlled repositories managementPrevious experience in a customer-facing roleBy submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.TPBN1_UKTJ

World Class Defence Organisation based in Bolton, Lancashire is currently looking to recruit 5x Development and Production Test Engineer - Electronic/Electrical subcontractors on an initial 12 month contract. Hybrid working from home is available, with a minimum of 3 Days onsite. • Looking for somebody with substantial test engineering experience., • Diagnosis of test failures, • Testing experience down to component level, • The department are keen to hear from candidates from a background with Electronics, RF, Microwave skills or candidates that have strong Test, Diagnostics, Repair Engineering skills. Hourly Rate: £37.00ph (Umbrella). (An accommodation allowance of £400 per week is available for those who live outside a 30 mile radius of the Bolton site) Contract Duration: 12 Months (initially and then ongoing and long-term thereafter) Development and Production Test Engineer – Electronic / Electrical Job Description: As a Production Test Engineer - Electronics, you will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Responsibilities: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: • Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment., • Testing and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level., • Generating test specifications, operator instructions and technical reports - based on higher-level requirements and information., • Promptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures., • Supporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations. Skillset/experience required: • Essential:, • Minimum HNC level of Engineering qualifications or equivalent., • Good understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level., • Awareness of electrical/electronic sub-system and system design, integration and test principles., • Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports., • Ability to plan and organise one's work according to assigned priorities., • Advantageous:, • Knowledge of RF and Microwave technology at the subsystem level., • Experience in operating manual and automated test equipment in an Electronics Manufacturing environment.

We’re recruiting for an experienced Electronic Design Engineer to join an electronics company based in Littlehampton. The ideal candidate will have previous experience of working as a Design Engineer, managing projects and deal with the concept through to production. You must have a Bachelor’s degree or equivalent in Electronic Engineering or related field. This is a great opportunity for a candidate that wants to develop and grow within a business as the company is growing at a very fast pace. As an Electronic Design Engineer, your key responsibilities will include: • Designing and developing electronics devices, systems and circuits, • Creating and reviewing design specs and technical documentation, • Working with other departments to define project deliverables and requirements, • Troubleshooting and resolving design and technical issues, • Ensuring all designs comply with relevant safety regulations Requirements: • Bachelors degree or equivalent in Electronic Engineering or similar, • Previous experience working as a Design Engineer, • Strong communication skills both written and verbally, • Proficiency in using design software such as, Eagle, Altium or similar Benefits: • 20 days annual leave + bank holidays + closed over the Christmas period, • Free onsite parking, • Work from home 1x a week, • Yearly bonus scheme This is a full time permanent position working Monday to Thursday 9am to 5:30pm with a 3pm finish on Friday’s. The role is based in Littlehampton. Wild Recruitment Ltd T/A First Recruitment Services is acting as an employment agency in relation to this vacancy.

Lead Electrical Design Engineer Location: Southampton Salary: £60-65k + Benefits + £5k Relocation if needed The Role We are seeking a highly capable Lead Electrical Design Engineer to join a dynamic, multidisciplinary engineering team delivering innovative, bespoke industrial equipment to a global customer base. Reporting to the Head of Engineering, you will act as the technical authority for all electrical and electronic aspects of projects. Youll collaborate across disciplines to define system architectures, requirements, and specifications, ensuring solutions are safe, compliant, and technically robust. The Company A specialist engineering organisation based in Southampton, delivering bespoke industrial solutions to a global market. The company focuses on high-value, technically challenging projects involving electrical control systems, and integrated mechanical material handling solutions. Projects typically range from £50k to £500k+, with delivery timelines spanning 312 months, covering the full lifecycle from concept to commissioning. Key Responsibilities Lead the design, development, manufacture, and support of advanced industrial electro-mechanical equipment. Coordinate electrical engineering activities, delivering projects on time, within budget, and to the highest quality standards. Own the electrical design lifecycle from concept through to verification and release. Contribute to system-level design decisions and cross-functional trade-offs. Approve and sign off electrical design documentation and outputs. Drive innovation and continuous improvement, troubleshooting and optimising existing designs while exploring new technologies. Develop strong technical knowledge to support customer and stakeholder engagement. Technical Skills & Experience Strong background in electrical and electronic systems engineering, including power conversion, transformers, switches, converters, and SMPS. Experience in system architecture and requirements definition. Knowledge of industrial automation, control systems, and industrial software. Understanding of thermal management and material considerations in industrial equipment. Desirable: Control panel design (PLC, HMI, SCADA) and programming Pneumatic or hydraulic systems Experience mentoring or leading a small team of engineers Chartered Engineer status (or working towards) Compliance, Safety & Standards Lead or contribute to CE marking activities Interpret and apply relevant standards (e.g. Low Voltage Directive, EMC) Ensure robust design reviews, safety compliance, and documentation Project & Commercial Involvement Provide technical input to new business proposals, including risk assessment Collaborate closely with engineering teams to ensure integrated product delivery Support commissioning, testing, and troubleshooting of new equipment Candidate Profile Degree-qualified (or equivalent) in Electrical Engineering Proven experience in industrial or process-based equipment design Strong problem-solving skills with a hands-on, project-driven mindset Able to operate as a technical leader within a collaborative environment The Opportunity This is a rare opportunity to take on a high-impact technical leadership role within a specialised engineering environment. Youll influence product direction, safety, and long-term engineering capability while working on complex, custom-built solutions for a global client base. If youre ready to lead cutting-edge electrical design projects and make a tangible impact, wed love to hear from you. JBRP1_UKTJ

Are you an experienced Electrical or Electronic Engineer looking for a rewarding role where you can inspire the next generation of engineering talent? Our client is seeking an Electrical Engineering Trainer to join their team in Gosport. This is a unique opportunity to step away from the tools and into a role where your expertise will directly shape the future of Marine Engineering professionals within a highly respected training environment. Role: Electrical Engineering Trainer Location: Gosport, fully onsite Hours: Term Time Only, Monday to Friday, 37.5 hours per week Salary: £42,000 Pro Rata Security Clearance: BPSS required prior to starting The Role: As an Electrical Engineering Trainer, you'll play a key role in delivering engaging and effective training programmes across the Marine Engineering Electrical Training Group. You'll combine your technical expertise with mentoring and coaching skills to help learners achieve their full potential Key responsibilities include: Delivering Electrical Marine Engineering training in line with established training plans and operating procedures. Supporting learners throughout their training journey, providing guidance, coaching and constructive feedback. Assessing coursework and monitoring learner progress to ensure successful outcomes. Maintaining and updating training materials and documentation to ensure training remains relevant and effective. Driving c...

We are looking for a Prototype Wiring Technician to join a company set in Fareham, Hampshire. The ideal candidate will have previous experience within a similar role and have relevant, direct qualifications. Job Title: Prototype Wiring Technician Location: Fareham Contract Type: Temporary to Permanent (first 6 months contract then if happy, client will offer a permanent role). Salary/Rate: £14 - £16ph (depending on experience) Hours: Mon - Fri (7- 4.30 with a half hour unpaid lunchbreak) 40 hours per week but times can be flexible Role Overview The Prototype Wiring Technician will be responsible for assembling and wiring prototype electronic systems, harnesses, and control panels from detailed engineering documentation. This position requires precision, technical understanding, and the ability to work closely with engineers during the prototype development process. Key Responsibilities Assemble and wire prototype electrical systems, harnesses, and control panels from engineering drawings, schematics, and wiring diagrams. Read and interpret electrical schematics, wiring diagrams, and mechanical layout drawings. Build, route, and terminate wire harnesses and cable assemblies to specification. Solder components and connectors on circuit boards or wiring assemblies (including through-hole and SMT where required). * Identify and troubleshoot wiring or assembly issues and collaborate with engineer...

JOB DESCRIPTION ESROE has vacancies in their small company of experts working in the area of Electronic Warfare, in particular, the area of Electronic Surveillance Measures (ESM) and Radar Identification. The successful applicant/s will be involved in the development of ESROEs MicroESM system/s and associated software applications. The roles are varied and can be biased towards software development or hardware tasks depending on skills and experience. Work may include a variety of software development projects, investigations into current performances, further algorithm development, user interface design and development, data analysis, writing software documentation, preparation of releases for customers, system testing and customer support. There is also the potential to work on some of ESROEs other key products, that of its artificial intelligence software for radar classification and for radar identification performance analysis. The hardware tasks require having general electronic engineering skills and firm radio frequency (RF) engineering knowledge or experience. Work may include b...

Applications & Test Engineer HMI/Sensors Are you an experienced Applications & Test Engineer with strong hands-on skills in electronics and firmware, looking to work with innovative touch technologies? This company specialises in developing bespoke hardware and firmware silicon devices. Their products serve automotive and industrial sectors, providing cutting-edge solutions that ensure high-quality customer integration. They are seeking a talented Applications & Test Engineer to join their engineering team in Fareham, UK, to contribute to the development and validation of their next-generation technology. Responsibilities of this Applications & Test Engineer job based in Fareham: • Internal prototyping, tuning, testing, and gaining a deep understanding of complete system-level solutions, • Hands-on building and testing of equipment, • Testing of firmware and validation of software, • Troubleshooting and identifying solutions for products already deployed in the field, • Developing proof of concepts based on customer requirements, • Interfacing with customers to understand product needs. Requirements of this Applications & Test Engineer job based in Fareham: • Experience in a commercial facing post sales application engineer role., • Hands-on experience with electronic and firmware testing and fault finding, • Experience within touch technology would be advantag...

This is an excellent opportunity for an experienced test engineer looking for a varied, hands-on position where you'll work on technically interesting products, contribute to continuous improvement and become part of a growing business with an excellent reputation for quality and innovation. Wor

Role: Electronic Test Engineer Location: Fareham Duration: 6 months (likely extensions) Rate: £27.50/hour PAYE Holiday entitlement - 25 day per annum (accrued) + pension scheme Shift pattern: 2pm - 10:30pm Mon - Thurs and 11am to 4pm Friday Position Summary Elevate your standards and embrace precision perfected, every detail, every line, speaks with precision, a masterpiece of engineering excellence! If you're a Test Technician who's looking for a new opportunity working for a customer focused, growing organisation that will offer training, development and career progression. Responsibilities The Ideal candidate must be motivated to learn and routinely practice excellent calibration techniques, you will need to complete work according to business instructions, specifications and procedure. You ideally will be competent in reading drawings, conducting a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type equipment such as Pressure controllers, and ideally possess skills around basic engineering competencies, fine assembly, calibration and test procedures. Qualifications The Electronic Test Technician will: Sets up and operates equipment to test/calibrate units/sub-assemblies as per instructions, specifications, and procedures. Perform troubleshooting and failure analysis of analogue a...

A fantastic opportunity has arisen for an Assembly and Test Engineer to join a growing organisation based in Fareham. This Assembly and Test Engineer opportunity in Fareham is ideal for an electronics professional looking to work with specialist RF equipment, production testing and advanced electronic systems. Assembly and Test Engineer job – Key Responsibilities Carry out production testing of specialist electronic radio equipment. Complete fault diagnosis and repair to bare board level using specialist RF test equipment. Perform system configuration, final unit testing and validation of test procedures. Support mechanical assembly, wiring assemblies, cable manufacture and kitting activities. Manage workload effectively to meet agreed specifications and timescales. Attend training to develop technical knowledge and support career progression. Assembly and Test Engineer job – Skills & Experience HND level qualification or equivalent in Electronics Engineering or a related discipline. Background in electronics testing within an advanced RF environment. Experience working with radio-based products and RF test equipment, including spectrum analysers and signal generators. Knowledge of product assembly, crimping, wiring and kitting would be beneficial. Strong attention to detail with good organisation and problem-solving skills. Ability to work effectiv...

Job Title: Electronic Design Engineer Location: Portsmouth Salary: £50,000 - £60,000 (Depending on Experience) Note: All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future. Overview: We are currently seeking an experienced Electronic Design Engineer with at least 3 years of commercial experience and a strong understanding of electronic design and testing within a manufacturing environment. Experience working within a regulated industry would be highly advantageous. Our client develops advanced electronic systems deployed across the UK and is continuing to expand its engineering team. This is an exciting opportunity to play a key role in the development of next-generation products, while also supporting the enhancement and maintenance of existing systems. Key Responsibilities • Collaborate with Embedded Software and Electronics Engineers to design, develop, modify, and test both new and existing systems, • Design electronic systems and complete products, considering component availability, lifecycle, and long-term reliability, • Develop and integrate hardware and software components to improve current platforms and support new product development, • Conduct fault-finding and fail...

EMC Test Engineer Orion is working with a market leader that is seeking an EMC Test Engineer to support the qualification and certification of advanced engineering systems. This is a key role focused on ensuring products meet stringent electromagnetic compatibility (EMC) and environmental compliance requirements, contributing directly to successful product qualification and programme delivery. Our client is a leading engineering organisation operating within a highly regulated, safety‑critical industry. They specialise in the design, development, testing and support of advanced electronic and mechanical systems used across a range of complex platforms. With a strong focus on innovation, quality and compliance, they work on cutting‑edge technologies and deliver solutions that meet rigorous industry standards. Key Responsibilities of the EMC Test Engineer Author, develop, and own qualification test plans and procedures, with a strong focus on EMC and environmental testing. Define and execute EMC test strategies covering RF interference, electromagnetic compatibility, and environmental conditions (e.g. temperature extremes, ruggedisation). Perform EMC and environmental test activities and produce comprehensive reports documenting results and compliance outcomes. Manage, organise, and support environmental and EMC testing programmes across multiple projects. Ensure systems meet relevant regulatory and certification standard...

Working within a collaborative engineering and production team, you'll play a key role in the testing, fault diagnosis and validation of specialist RF communication products used by government, defence and security organisations around the world. As an RF Test Engineer, you'll be responsible for tes

RF Test Engineer / Electronics Test Engineer required to join a growing technology company based in Fareham. Working within a collaborative engineering and production team, you'll play a key role in the testing, fault diagnosis and validation of specialist RF communication products used by governmen

A leading aerospace avionics business based in Fareham is seeking a Chief Systems Engineer to provide technical leadership and act as the organisation's Technical Leader and Certification Authority representative. This is a senior engineering leadership role within a highly regulated civil aerospace environment, responsible for ensuring the airworthiness, compliance and certification of safety‑critical avionics equipment supplied to global aircraft programmes. The business operates within a regulated civil aviation framework, working directly with certification authorities such as the UK CAA, EASA and FAA, delivering safety‑critical avionics equipment that must meet the highest levels of regulatory compliance and technical excellence. Permanent Monday to Thursday, 8:00am - 4:30pm and Friday, 8:00am - 1:00pm Very Competitive Salary on Offer + Bonus Fareham • Provide technical leadership across departments, • Act as Company Design Signatory, signing off product certification and airworthiness, • Serve as the primary point of contact with the UK CAA certification manager, • Ensure engineering processes comply with relevant civil aviation regulations, • Review and approve certification artefacts, DDPs and compliance documentation, • Oversee system lifecycle planning in accordance with civil aircraft & systems development guidance, safety‑critical software, airborne electronic hardware and system safety assessment methods, • Ensure compliance with UK CAA regulations, • Oversee DO-160G environmental and EMC qualification testing, • Ensure robust configuration and change control processes are maintained, • Represent engineering in discussions with customers, suppliers and regulators, • Previous experience in avionics systems certification would be preferred, • Knowledge of: ED-79B, ED-12C, ED-80, ED-135, UK CAA, EASA or FAA certification processes and DO-160G qualification testing is desirable, • Product certification & airworthiness signatory responsibility, • Configuration and change control systems, • Strong understanding of software, hardware and mechanical integration in airborne systems, • Experience signing off design certifications and approving compliance data, • Chartered Engineer (CEng) preferred, • Able to operate autonomously while understanding commercial implications, • Bonus, • Funded membership of a professional body, • Focused career development planning with opportunities to progress, • Pension scheme with up to 10% matching company contribution, • Income protection scheme, • Life Assurance x4 basic salary, • Share buying scheme, • 25 days holiday, plus bank holidays, with the option to buy and sell up to 5 days, • Service‑related holiday (3 years = 1 day and increase up to max 5 days), • Cash Plan or Private Medical Cover, • Employee Assistance Program for Health & Wellbeing, • Free on‑site car parking, • Employee Referral Scheme, • Employee Perks - offering employees discounts on a huge variety of goods and services If you would like to find out more, please click 'apply' or contact (url removed) for a confidential discussion #J-18808-Ljbffr

You'll ideally have experience of: RF electronics testing and fault diagnosis Radio communication products Spectrum analysers, signal generators and RF test equipment Board-level fault finding and repair Electronic production or manufacturing environments Reading engineering drawings and technical d

You ideally will be competent in reading drawings, conducting a variety of verification tests and calibration on electronic and electromechanical equipment with the use of a range of common electronics measurement equipment and specialist type equipment such as Pressure controllers, and ideally poss

The hardware tasks require having general electronic engineering skills and firm radio frequency (RF) engineering knowledge or experience. The roles are varied and can be biased towards software development or hardware tasks depending on skills and experience. There is the opportunity for short trip

Our clients, based close to Fareham, have an exciting opportunity for a Senior Quality Engineer to join their growing team. Duties & Responsibilities: Record and categorise non-conformities. Find root cause and implement effective corrective action. Carry out regular toolbox talks to advise technicians of quality issues and agreed corrective actions. Where customer needs are missed, record and investigate root causes with the relevant stakeholders Customer complaints and non-conformance administration. Record details, find root cause and determine corrective actions to prevent recurrence. Keep customers updated throughout the process and close off complaints in a timely manner Internal auditor for QMS and EMS Provide QA support for project work and product changes carried out by Engineering and Technical Services functions Defining, communicating and managing the Project Quality Assurance activities through an approved and operating Quality Plan Determining and managing a project audit plan to ensure that projects are operating in compliance with customer and applicable statutory, regulatory and BMS requirements Ensure QA is represented at all project design review milestones Ensure project release into production is controlled and any QA risks are documented and mitigated Manage project non-conformance issues to ensure effective corrective actions are taken to achieve a level of zero recurrence Supplier auditor. Work with the Purchasing team to assess new suppliers and re-assess existing suppliers Visiting vendor facilities and observing the manufacturing environment to review and assess their procedures Monitor and measure supplier quality performance and work with the Purchasing and Quality Managers to implement corrective action to continually reduce supplier failure costs Work with key suppliers to develop and maintain an approved supply chain with clearly defined quality condition Review incoming supplies and products from vendors to check for defects and ensure quality Maintain detailed reports on supplier quality, including defect rates and areas that result in flaws Provide technical advice, guidance and support to suppliers to reduce defect rates Required skill & experience: Quality experience within a manufacturing environment Experience with non-conformance & corrective actions Inspection of electrical, electronic and/or mechanical parts, assemblies and products against engineering drawings and specifications Liaising with customers, suppliers and internal stakeholders on quality related issues, including complaints, rejects, FATs, FAIRs and change control Working hours: 37.5 hours per week, Monday to Friday. 08:00-16:00 with a 30 min lunch TPBN1_UKTJ

MERITUS are recruiting for a Systems Engineer specialising in EMC and TEMPEST compliant installation design to join a leading aerospace and defence organisation supporting highly secure satellite communications and ground systems programmes. This role will require security clearance due to the nature of the work. SYSTEMS ENGINEER (EMC / TEMPEST) - PERMANENT - PORTSMOUTH - COMPETITIVE SALARY + BENEFITS - SINGLE STAGE INTERVIEW PROCESS - SECTOR: DEFENCE / SPACE / SATELLITE COMMUNICATIONS MERITUS are recruiting for a Systems Engineer to support the design, integration, verification, and deployment of secure ground-based communications and control systems. Working within a multidisciplinary engineering team, you will play a key role in developing EMC and TEMPEST compliant installation solutions across complex defence and satellite communications programmes. This is an excellent opportunity to join a technically advanced environment delivering critical infrastructure and communications capability to defence customers. The position offers exposure across the full systems engineering lifecycle, from requirements capture and architecture development through to testing, installation, acceptance, and operational support. Key Responsibilities Support the development of EMC and TEMPEST compliant equipment installation designs for secure communications systems. Capture and analyse customer and stakeholder requirements throughout the project lifecycle. Define system architectures and installation solutions while ensuring compliance with applicable standards and constraints. Produce EMC and TEMPEST test plans, procedures, and supporting compliance documentation. Coordinate with specialist test facilities and external stakeholders to define verification and certification activities. Conduct systems engineering analysis, modelling, and trade studies to support design decisions. Define and manage interface requirements across complex system architectures. Support integration, verification, validation, and acceptance activities. Assess the impact of design changes throughout the product lifecycle. Contribute to operational deployment, transition into service, and ongoing system support activities. Ensure all work is conducted in accordance with security, export control, and regulatory requirements. About You Essential Skills & Experience Practical experience designing or installing electrical and electronic equipment within complex engineering environments. Strong understanding of electrical interference mechanisms and mitigation techniques. Experience with rack-mounted equipment installations and compliant cabling practices. Knowledge of EMC principles and system-level compliance requirements. Experience generating installation verification or test plans. Understanding of systems engineering processes across the full lifecycle. Experience supporting integration, verification, validation, and operational acceptance activities. Ability to work within highly regulated and security-conscious environments. Strong communication and stakeholder management skills. Desirable Skills & Experience Knowledge of TEMPEST standards, testing methodologies, and compliance requirements. Experience working with EMC test specifications, procedures, and certification activities. Military communications, defence infrastructure, or secure communications experience. Knowledge of military ground installation standards and practices. Previous involvement in satellite communications or secure network infrastructure programmes. Degree qualified in an engineering discipline. Chartered Engineer status or working towards professional registration. Experience supporting safety-critical or mission-critical systems

A growing technology company based in Fareham is looking for a Graduate Engineer to join its specialist engineering team. This is an excellent opportunity for a recent Electronic Engineering graduate to begin their career working with Software Defined Radio (SDR), RF systems, digital communications and advanced technology products. The successful candidate will support customers with product integration and technical queries, develop application examples and technical documentation, and work closely with engineering teams on a range of innovative projects. The role offers excellent training and long-term career development opportunities. Essential Requirements Degree in Electronic Engineering Strong interest in RF systems, digital communications, signal processing or Software Defined Radio Strong analytical and problem-solving skills Good written and verbal communication skills Enthusiastic, hands-on approach and willingness to learn Any Experience in the Following Would Be Beneficial Python, C or C++ programming MATLAB Linux environments GNU Radio or SDR technologies FPGA concepts, VHDL or Verilog Digital signal processing The Role Develop application examples and reference designs Create technical documentation and user guides Support customers with integration and technical issues Assist with demonstrations and customer meetings Work closely with engineering teams to improve products and user experience Investigate and troubleshoot software and system-level issues This is an opportunity to join an innovative technology company working on cutting-edge communications and SDR technology. The role would suit a recent Electronic Engineering graduate looking to develop their engineering skills within a supportive and growing business. Spectrum IT Recruitment (South) Limited is acting as an Employment Agency in relation to this vacancy

Test Development Engineer Isle of Wight – Office Based Eligible for SC Clearance £45,000-£55,000 We are currently partnering with a well-established and growing electronics manufacturing organisation who are looking for x2 Test Development Engineers to join their expanding team. The business operates within a highly technical, production-led environment, delivering complex electronic products and systems into demanding applications. With continued investment in both manufacturing capability and new product introduction, they are now looking to strengthen their test engineering function. This is an excellent opportunity for someone with either a strong background in electronic test engineering and test equipment. Or for someone just starting off in their career and looking to build a career in Engineering. In this role, you will provide hands-on support to production test operations, including fault finding, diagnosis, and repair of test equipment and fixtures. You will also be involved in the design and development of new test solutions, including manual, semi-automated, and automated test systems, working closely with senior engineering stakeholders. Alongside this, you will contribute to continuous improvement activities, helping to enhance test efficiency, reduce costs, and improve overall manufacturing test capability. The role is based on the Isle of Wight and is an office-based position. Key Responsibilities Provide first-line technical support for production test issues, including diagnosis and repair of test equipment and fixtures. Design and develop test equipment, including development jigs, qualification fixtures, manual and automated test systems. Support new product introduction (NPI) activities from a test engineering perspective. Maintain and improve technical documentation relating to test systems and processes. Support and maintain existing test hardware and software platforms. Identify and implement improvements to test processes, equipment efficiency, and cost reduction opportunities. Work closely with Engineering, Production, Operations, and Quality teams to ensure robust and reliable test coverage. Experience Required Ideally have a qualification in Electrical/Electronic Engineering (A Level, BTEC, HNC, HND or equivalent). Strong understanding of electronic test equipment and its application in a manufacturing environment (manual and ATE). Good understanding of test engineering principles and manufacturing test processes. Knowledge of in-circuit testing (ICT) principles. Experience testing switched mode power supplies (SMPS) or similar electronic circuitry. Strong analytical and fault-finding skills within an electronics environment. Bonus Skills: LabVIEW, Python, C#/C/C++, Power Supply Salary: Mid-Level: £45,000-£55,000 Graduate/Junior Level: £30,000-£40,000 Benefits: 25 days holiday, Pension, Healthcare Interview Process: 1st stage on Teams, 2nd stage in Office If this role sounds of interest, please apply and I can give you a call. Tim Stock (url removed) (phone number removed) | (phone number removed)

Job Title: Electronic Design Engineer Location: Portsmouth Salary: £50,000 - £60,000 (Depending on Experience) Note: All applicants must be able to work in the UK without the need for VISA Sponsorship now, or in the future. Overview: We are currently seeking an experienced Electronic Design Engineer with at least 3 years of commercial experience and a strong understanding of electronic design and testing within a manufacturing environment. Experience working within a regulated industry would be highly advantageous. Our client develops advanced electronic systems deployed across the UK and is continuing to expand its engineering team. This is an exciting opportunity to play a key role in the development of next-generation products, while also supporting the enhancement and maintenance of existing systems. Key Responsibilities Collaborate with Embedded Software and Electronics Engineers to design, develop, modify, and test both new and existing systems Design electronic systems and complete products, considering component availability, lifecycle, and long-term reliability Develop and integrate hardware and software components to improve current platforms and support new product development Conduct fault-finding and failure analysis activities from PCB level through to complete system level Use a variety of test and measurement equipment, including oscilloscopes and digital multimeters, to evaluate PCBs and associated electronics Design, develop, review, and test embedded firmware using C Design, review, and test electronic hardware, including PCB development Support the creation of new hardware and software assemblies to enhance both existing and future systems Required Skills & Experience Commercial experience with both analogue and digital electronic design Strong component selection, validation, and testing experience Understanding of Embedded C development Knowledge of automated testing methodologies (desirable) If you are interested in this opportunity, please apply with your latest CV. Suitable applicants will be contacted with further information

Senior Mechanical Design Engineer Fareham, Hampshire – onsite £50,000 - £60,000 (negotiable) Due to continued success this small innovative engineering company seeks an experienced mechanical design engineer to join their team. Senior Mechanical Design Engineer candidates will need to have Solid professional experience within mechanical design having taken numerous products from concept to production Competent with 2D and 3D CAD as well as stress analysis/ FEA A natural curiosity for engineering and technology, being adept as problem solving and learning new techniques and engineering skills The ability to work effectively and efficiently in a small company environment The role will involve taking products from concept to production. You will be involved with all aspects of product design and development and will support NPI, sales and bid teams. The company is involved with low volume, bespoke systems for defence and security markets. The projects are broad and varied but require the ability to solve complex and challenging engineering problems and design simple, robust and user-friendly solutions for use in the field. Hence designing high reliability and rugged products would be useful. Skills / Knowledge required: Senior Mechanical Design Engineer A degree or higher in a relevant engineering discipline (e.g. mechanical engineering, automotive engineering, naval architecture) At least 5 years of professional experience within mechanical design (taking products from concept to production) covering a broad range of products and applications Stress analysis and / or structural engineering would be useful (e.g. FEA, hand calculations) Excellent and current 3D solid modelling experience (Solidworks, NX, Catia or similar) Experience of thermal management, EMC shielding, packaging of electrical / electronic systems OR vehicle integration / systems integration would be great Beneficial skills (nice to have): Senior Mechanical Design Engineer Experience of developing products and systems for the defence or security markets (e.g. military vehicles, specialist equipment, maritime / airborne sensors / communication arrays, ruggedised portable or vehicle mounted equipment, etc) Experience of low-volume, high value, electromechanical systems for static or mobile applications (ideally military, aerospace, marine or similar) Experience of electrical integration or cable routing would be useful This Senior Mechanical Design Engineer role is commutable from Southampton, Winchester, Fareham, Gosport, Portsmouth, Bognor Regis, Eastleigh, Havant and Petersfield

Electronics Engineer Automotive/Motorsport Norfolk Permanent The Role - Electronics Engineer We are looking for a talented Electronics Engineer to join a thriving business in the development of cutting-edge, high-reliability electronic systems for automotive and motorsport applications. P

Electronic Security Systems Engineer – CCTV, Intruder Alarm & Access Control- Cheshire - £34,000- £42,000 £34,000- £42,000 (dependent on experience) Company vehicle and fuel card Overtime opportunities available On-call rota with additional earning p

Electronic Trading Application Support Engineer. Electronic Trading Application Support Engineer. You will work closely with traders, quantitative development teams, infrastructure engineers, architects and third-party vendors to ensure the stability, performance and availability of critical trading

We are looking for talented software engineers to join our London trading technology teams to build the next generation of crypto trading systems.

Principal Electronic Design technical lead required to take ownership of the company's electronic engineering efforts. Own and drive the company's electronic engineering efforts, providing technical leadership across hardware development. Apply hands-on electronics skills including debugging, osci

Talan Group is seeking an Electronic Trading Application Support Engineer to join a global Production Support team responsible for a highly available trading ecosystem across Rates and Credit markets. You will work with traders, quantitative developers, infra engineers and vendors to ensure stabilit