Trabajos engineer electronic en DunstableCrear alertas

Highways Technology EngineerRoadside SystemsPermanent£40,000 + Various benefits+VanRole Overview Highways Technology EngineerThis position involves delivering installation, maintenance, and commissioning work on roadside technology used across the strategic road network. The role supports a wider engineering and project delivery team, ensuring that all systems are installed, tested, and maintained to required standards while meeting safety, environmental, and quality expectations.You will work closely with field teams and specialist contractors, supporting the coordination and delivery of tasks across multiple sites. The role reports into an Assistant Project Manager, who in turn reports to a Project Manager.Key Responsibilities Highways Technology Engineer • Promote and maintain a safe working environment for all personnel on site., • Install, commission, and maintain a range of roadside electronic and electrical equipment., • Carry out testing on hardware, software, and integrated systems., • Complete all required documentation in line with safety and quality procedures., • Assist with planning and delivering project tasks as directed by the Assistant Project Manager., • Supervise on-site teams and subcontractors to ensure productivity, compliance, and quality standards are met., • Work flexibly across the network, including occasional nights and weekends as required.Person Requirements Highways Technology Engineer, • Experience in installation or maintenance of electrical or electronic equipment (essential)., • Basic IT literacy (e.g., Word, Excel)., • ONC/HNC or equivalent qualification in Electrical/Electronic Engineering., • Understanding or previous involvement with roadside technology standards (e.g., HERS) is beneficial., • Comfortable working at the roadside and at height., • Able to travel across the region as required., • Willing to work variable shifts, including ad hoc nights and weekends., • Able to pass a basic DBS check. If you are interested in this Highways Technology Engineer vacancy, have any questions or wish to apply then please send us a copy of your CV.Utilise Recruitment

Experienced Security & Data Engineer Salary: £38,000 – £48,000 p.a. + company van + healthcare + pension Location: Field-based (UK South East / South Central preferred) Employment Type: Full-time, Permanent Role Overview We are seeking an experienced and motivated Security & Data Engineer to join our growing team. The successful candidate will have a minimum of 5 years’ experience installing and commissioning electronic security and structured cabling systems. You’ll take ownership of taking project install from start to finish, manage first-fix subcontractors or trainees, and deliver work to the highest standards of safety and professionalism. Key Responsibilities • Installation, servicing, and commissioning of CCTV, Intruder, Access Control, Intercom, and Data Cabling systems, • Oversee and support assistant engineers or subcontractors during project delivery, • Ensure all installations comply with relevant standards and customer specifications, • Conduct site surveys, produce as-fitted documentation, and liaise with clients professionally, including training on the systems, • Work autonomously or as part of a wider project team, • Provide technical input for ongoing system improvements and learn new technologies Requirements • Experience within a security systems company, • Proven experience with systems such as Texecom, Paxton, Hikvision, Avigilon, Gallagher, Urmet, 2N, NX., • Strong fault-finding, cabling, commissioning and general practical skills, • Full UK driving licence and permission to work in UK, • BS7858 vetting and enhanced DBS clearance required (or eligibility to obtain), • Excellent communication, leadership, and time management skills Desirable • Experience mentoring or supervising junior engineers, • IP networking and fibre termination knowledge, • ECS/CSCS, IPAF, or PASMA certification What We Offer • £35,000 – £45,000 salary (dependent on experience), • Company van, tools and uniform provided, • Private healthcare & pension scheme (after probation period), • Career progression to Senior Commissioning Engineer / Project Manager, • Ongoing manufacturer and in-house training

You're an experienced, hands-on Electronic Technician / Engineer with good fault finding diagnostic and repair skills at a component /PCB board level. Maybe you've got an assembly or repair background and want to do more? We don't do micromanagement - so you've got to have a detail oriented, organised and structured approach to work. BASIC SALARY: Up to £40,000 · 25 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Amersham, Chesham, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? · Friendly, close knit, experienced team of Electronic / Electrical Engineers - with a great team spirit · Work life balance is important! Come in, do your job, leave at a sensible hour · With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB Based at the Watford site and working in our the test / calibration lab alongside a team of Calibration Engineers and a department manager. This role requires independent problem solving, and the ability to carry out repairs and adjustments on complex test equipment and instrumentation. You'll also be a key player in maintaining the integrity and performance of critical lab equipment - whilst also supporting and mentoring junior team members. You will occasionally support with calibration of equipment as required by the business. PERSON SPECIFICATION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB · An experienced, hands-on Electronic Engineer with good soldering, fault finding diagnostic and repair skills at a component / board level · You've got a detail oriented, organised and structured approach to work · Your experience could come from electronic repair, assembly, calibration, testing etc. Any exposure to calibration labs would be a bonus. THE COMPANY: We're approaching 100 years in business, we're a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. PROSPECTS: Regular salary reviews and potential to develop your career with a well established and growing business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB, Soldering - Testing Lab, Calibration Lab INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18414, Wallace Hind Selection

Contract Software Engineer (Test) • Location: Luton (Hybrid: up to 4 days on-site, 1 day remote), • Contract: 12 months - Inside IR35, • Day Rate: £72ph About the Role We are recruitment experienced Software Test Engineers to support our Electronic Warfare line of business, that can work with minimal supervision to deliver current and future programs. This role provides an opportunity to work on the latest defence technology within a mature development environment. What You’ll Do · Create test cases, test procedures and automated test scripts for embedded systems. · Perform integration, system, and regression testing on mission-critical software. · Collaborate with developers and systems engineers to identify defects and drive resolution. · Analyse test results, produce detailed reports, and provide recommendations for improvements. · Ensure compliance with company standards and internal processes. What We’re Looking For · ISTQB Foundation level knowledge · Strong background in testing complex real-time embedded systems. · Proficiency in test automation frameworks and scripting languages (e.g., Python, C++, or similar). · Solid understanding of software development lifecycle (SDLC) and Agile methodologies. · Excellent analytical and problem-solving skills. · Strong communication and collaboration abilities. Desirable: · Defence or Electronic Warfare domain experience. · RTCA-DO178C Why This Contract? · Immediate start (subject to on-boarding and SC Clearance). · Hybrid working model for flexibility (4 days on-site, 1 day remote). · Opportunity to work on innovative defence technology with a high degree of autonomy. · Long-term project with strong potential for extension.

We’re looking for an Electronics Design Engineer to work across hardware design and EMC/environmental testing on complex, multi-layer boards for highly regulated markets. This role could suit a mid-level/senior hardware engineer or a test engineer looking for a path into design. This Electronic Design role offers the chance to see products all the way from early requirements through to final qualification. You’ll be working on ruggedised computing systems used in demanding environments, with plenty of variety in both design and investigation. The work spans requirements capture, schematic design, supporting PCB layout, troubleshooting EMC and environmental test issues, and producing the detailed documentation required for regulated industries. Electronics Design Engineer required skills: • Electronics or hardware engineering background, • Some experience in board‑level design, • Comfortable with hands‑on testing such as EMC or environmental work, • Ability to fault‑find at board level, • Experience in analogue, digital or embedded electronics Desirable skills of interest – • Exposure to regulated sectors – aerospace, automotive, medical or similar, • High‑layer‑count PCB experience (18–24 layers), • Video or high‑speed interfaces, • Knowledge of ORCAD, Mentor or similar design tools, • Design‑for‑EMC awareness

Contract Systems Engineer – Electronic Warfare (EW) Sensors Location: Luton (Hybrid) Contract: Contract opportunity Security Clearance: Ability to obtain SC Clearance required We are supporting a programme in the defence and secure technology sector and are looking for an experienced Contract Systems Engineer to support the modification, testing and certification of Electronic Warfare (EW) sensor products for export customers. This role will involve applying systems engineering expertise across the development lifecycle to support the delivery of new system variants and ensure compliance with certification requirements. The Role You will work as part of a multidisciplinary engineering team responsible for integrating complex engineering and technology components into high-performance EW sensor systems. Key responsibilities will include: • Updating and managing system requirements and acceptance evidence for new and modified system variants, • Supporting system integration, verification and validation activities to ensure compliance with requirements, • Gathering and maintaining evidence required for system certification, • Developing and implementing engineering change requests to support the delivery of new system variants, • Strong technical background within a relevant engineering discipline, • High proficiency in requirements generation and management using IBM DOORS, • Good understanding of formal testing processes used to gather certification evidence, • Experience managing engineering change requests from creation through to verification, • Good understanding of design compliance and acceptance criteria required for system certification, • Strong knowledge of systems engineering principles across the full development lifecycle, • Excellent written, verbal and presentation skills, • Knowledge of ISO/IEC 15288, • Experience within the defence or aerospace sector Due to the nature of the programme, candidates must be eligible to obtain Security Check (SC) clearance for UK-caveated projects.

Lead Equipment Engineer - Shift-Based Role (Days and Nights) – Oldham – Greater Manchester Bluegate are looking for a hands-on Lead Equipment Engineer to drive performance in a wafer fabrication facility and keep our critical tools running at peak efficiency. The Role You’ll be the go-to leader on shift—balancing technical expertise with people management to deliver uptime, quality, and results. • Lead and motivate Engineers, Technicians, and TPMs, • Maximise equipment availability and productivity, • Own maintenance, fault-finding, and improvement activities, • Work closely with Production, Process, and Vendors What You’ll Bring • HNC+ in Electronic, Mechanical, or Mechatronic Engineering (or equivalent experience), • Strong electronic engineering knowledge, • Wafer fab equipment and process experience, • Proven leadership and organisational skills You will be offered competitive salary, annual pay reviews, generous benefits package, relocation assistance if necessary and sponsorship if required. If you have a background within a senior Equipment Engineering background and have team leadership experience then this could be for you. Apply now! Or for more information on the Lead Equipment Engineer role, based in Oldham, Greater Manchester, please contact Tommy Beazley quoting job reference TRB520 .

Contract Systems Engineer – Electronic Warfare (EW) Sensors Location: Luton (Hybrid) Contract: Contract opportunity Security Clearance: Ability to obtain SC Clearance required We are supporting a programme in the defence and secure technology sector and are looking for an experienced Contract Systems Engineer to support the modification, testing and certification of Electronic Warfare (EW) sensor products for export customers. This role will involve applying systems engineering expertise across the development lifecycle to support the delivery of new system variants and ensure compliance with certification requirements. The Role You will work as part of a multidisciplinary engineering team responsible for integrating complex engineering and technology components into high-performance EW sensor systems. Key responsibilities will include: • Updating and managing system requirements and acceptance evidence for new and modified system variants, • Supporting system integration, verification and validation activities to ensure compliance with requirements, • Gathering and maintaining evidence required for system certification, • Developing and implementing engineering change requests to support the delivery of new system variants, • Strong technical background within a relevant engineering discipline, • High proficiency in requirements generation and management using IBM DOORS, • Good understanding of formal testing processes used to gather certification evidence, • Experience managing engineering change requests from creation through to verification, • Good understanding of design compliance and acceptance criteria required for system certification, • Strong knowledge of systems engineering principles across the full development lifecycle, • Excellent written, verbal and presentation skills, • Knowledge of ISO/IEC 15288, • Experience within the defence or aerospace sector Due to the nature of the programme, candidates must be eligible to obtain Security Check (SC) clearance for UK-caveated projects.

Highways Technology Engineer Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. Roadside Systems Permanent £40,000 + Various benefits +Van Role Overview Highways Technology Engineer This position involves delivering installation, maintenance, and commissioning work on roadside technology used across the strategic road network. The role supports a wider engineering and project delivery team, ensuring that all systems are installed, tested, and maintained to required standards while meeting safety, environmental, and quality expectations. You will work closely with field teams and specialist contractors, supporting the coordination and delivery of tasks across multiple sites. The role reports into an Assistant Project Manager, who in turn reports to a Project Manager. Key Responsibilities Highways Technology Engineer • Promote and maintain a safe working environment for all personnel on site., • Install, commission, and maintain a range of roadside electronic and electrical equipment., • Carry out testing on hardware, software, and integrated systems., • Complete all required documentation in line with safety and quality procedures., • Assist with planning and delivering project tasks as directed by the Assistant Project Manager., • Supervise on-site teams and subcontractors to ensure productivity, compliance, and quality standards are met., • Experience in installation or maintenance of electrical or electronic equipment (essential)., • Basic IT literacy (e.g., Word, Excel)., • ONC/HNC or equivalent qualification in Electrical/Electronic Engineering., • Understanding or previous involvement with roadside technology standards (e.g., HERS) is beneficial., • Comfortable working at the roadside and at height., • Able to travel across the region as required., • Willing to work variable shifts, including ad hoc nights and weekends. xrnqpay

Were looking for an Electronics Design Engineer to work across hardware design and EMC/environmental testing on complex, multi-layer boards for highly regulated markets. This role could suit a mid-level/senior hardware engineer or a test engineer looking for a path into design. This Electronic Design role offers the chance to see products all the way from early requirements through to final qualification. Youll be working on ruggedised computing systems used in demanding environments, with plenty of variety in both design and investigation. The work spans requirements capture, schematic design, supporting PCB layout, troubleshooting EMC and environmental test issues, and producing the detailed documentation required for regulated industries. Electronics Design Engineer required skills: Electronics or hardware engineering background Some experience in board-level design Comfortable with hands-on testing such as EMC or environmental work Ability to fault-find at board level Experience in analogue, digital or embedded electronics Desirable skills of interest

You're an experienced, hands-on Electronic Technician / Engineer with good fault finding diagnostic and repair skills at a component /PCB board level. Maybe you've got an assembly or repair background and want to do more? We don't do micromanagement - so you've got to have a detail oriented, organised and structured approach to work. BASIC SALARY: Up to £40,000 · 25 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Amersham, Chesham, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? · Friendly, close knit, experienced team of Electronic / Electrical Engineers - with a great team spirit · Work life balance is important! Come in, do your job, leave at a sensible hour · With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB Based at the Watford site and working in our the test / calibration lab alongside a team...

We want to recruit an experienced International Field Service Engineer with experience of working on packaging and / or filling machinery which is used in the food, pharmaceutical and chemical markets. This is a global role involving spending up to 50% of your time travelling and working abroad, usually one week trips in Europe and Worldwide. You will be factory based in Bedford when not overseas. BASIC SALARY: up to £55,000 BENEFITS: · Overtime to earn circa £10,000 · ALL travel expenses covered when abroad or in the UK LOCATION: Factory based - Bedford COMMUTABLE LOCATIONS: Milton Keynes, Northampton, Cambridge, Peterborough, Luton, Huntingdon JOB DESCRIPTION: International Service Engineer, Maintenance Engineer - manufacturer, machinery This International Service Engineer role involves the repair, refurbishment, upgrades and modification of installed machinery, and the installation and commissioning of new machinery. You will be working on standard and bespoke packaging and filling machinery used in the food, pharmaceutical & chemical markets. Factory based when not working abroad and therefore commutable to Bedford. Overtime is paid door to door over 39 hours per week with very occasional weekend work. PERSON SPECIFICATION: International Service Engineer, Maintenance Engineer - manufacturer, machinery · You will have a proven track record as an international Field Service Engineer ideally with hands on experience of process or packaging machinery in the food, chemicals or pharmaceutical markets. · The company will consider an experienced UK Service Engineer looking to move into an international role or even an experienced food or pharmaceutical factory Maintenance Engineer wanting to get into a field service role with international travel. · You WILL be willing to be trained to fault find and modifySiemens and / or Allen Bradley PLC`s. · You WILL be a qualified Electrical / Electronic Engineer. · You WILL be able and willing to spend up to 50% of your time working abroad. THE COMPANY: A well established market leading British manufacturer of packaging and filling machinery used in the food, chemical & pharmaceutical markets. Extremely well run and profitable and a genuinely nice place to work. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18417, Wallace Hind Selection JBRP1_UKTJ

Introduction Saab in UK is growing rapidly, with over 600 colleagues across nine sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Electronics Component Engineer position will lead the data management, component supplier identification and ECAD data drawing tasks for the the electronics design and prototyping department. This role is suited to a highly detail oriented person with experience in detailed electronic design, extensive knowledge of component parameters and good supplier relationships. The candidate should be used to working in regulated environments and strict documentation and traceability requirements. Key Responsibilities: Design Execution: * Manage full PCB and wiring harness data through it's lifecycle. From requirements documentation, to design documentation, issuing production data to manufacturers and resolving supplier queries. Design Standardisation & Quality Governance: * Act as the go to resource within the department for data management, supplier selection and PCB library management. * Follow in house processes and procedures for data management, database cleansing and schematic symbol + footprint drawing. Project Team Coordination: * Work with the design team and electronics assembly team to ensure selection and provision of suitable electronics components and COTS systems. * Work in a fast paced environment to deliver schematic symbol and PCB footprint design data in a standardised format in Altium. * Ensure personal workloads, priorities and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • 3-4 years experience in electronics component engineering/component librarian roles for modern high speed, high component density systems., • Significant expertise in schematic symbol and PCB footprint design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to implement processes to ensure adherence., • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience working on many projects at once and managing your time effectively., • Experience of interfacing with subcontractors, • Experience with relevant IPC standards 2221, 7351, 610, 6012 e.t.c, • Experience working within a highly regulated industry. (Aerospace, rail, military, medical…) Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

A leading engineering organization in Caddington is seeking a Technical Support Engineer to provide back-office technical support for Electronic Warfare systems.This role includes managing equipment calibration, interacting with various stakeholders, and supporting defect investigations.Ideal candid

In the role of Principal Technical Support Engineer, you will be part a multi discipline engineering team providing the back office technical activities required to support Electronic Warfare Systems and Defensive Aid products installed in Fixed and Rotary Wing Platforms of UK and Global customers,

A leading aerospace and defence company in Luton is seeking a Principal Supportability Engineer to lead integration across complex systems in Electronic Warfare. The role involves defining strategies, overseeing ILS and Safety procedures, and engaging with clients to ensure successful delivery.

Medical Field Service Engineer Medical Systems £45K + 10% Bonus (Earnings circa £50K) + Company Vehicle + Excellent benefits package including Healthcare, Generous Contributory Pension Scheme and Full and Comprehensive Manufacturers based Product Training Cambridge, Luton, Hitchin, Stevenage, Hertford, Ware, Bedford, Milton Keynes, Watford and surrounding areas An excellent opportunity for a Field Service Engineer, Biomedical Engineer or Medical Engineer from a wide range of potential sectors, including ex HM Forces Radar & Weapons Systems Engineers (RAF, REME, Navy), Medical Engineers, X-ray and CT Service Engineers, Subsea Engineers, Laboratory Engineers and engineers from other high value capital equipment backgrounds, to join a global market leading manufacturer in sophisticated medical systems, offering first class product training and unsurpassed opportunities for career development The Company – Medical Field Service Engineer, Medical Systems My client is a global leader in healthcare. This organisation’s impressive portfolio of products and fully integrated medical systems incorporates many aspects of the healthcare equipment sector. Offering 'best in class' solutions across a wide range of equipment modalities, their success is based upon a commitment to world leading manufacturing facilities, outstanding product innovation, excellent customer care and the recruitment and development of good people. They employ thousands of people globally and are an integral part of an instantly recognisable worldwide technology group. The Role - Medical Field Service Engineer, Medical Systems Following expansion, they seek to recruit a customer focused and technically motivated Medical Field Service Engineer, responsible for the service, repair, breakdown and maintenance of their range of highly advanced Medical Systems, located at hospital and healthcare centres throughout the region above. Your Background - Medical Field Service Engineer, Medical Systems Applications are encouraged from Field Service Engineers, Medical Engineers or Biomedical Engineers from a wide range of engineering sectors, including medical device, medical imaging, laboratory device, subsea oil and gas, semiconductor, ex HM Forces Engineers (RAF, REME, Navy), industrial / commercial imaging or other areas of electronic manufacturing and services. You must have impeccable customer service skills and a confident and professional manner in customer facing environments. The Benefits - Medical Field Service Engineer, Medical Systems This is an excellent opportunity to join a world class medical systems organisation. You will be joining a national team of engineers who take great pride in their work and who aim to build upon long term relationships with customers. You will be continually challenged as you are exposed to new technologies. You will receive constant support and guidance from senior management and your technical knowledge will be furthered through training courses. For those with the desire there are opportunities to progress your career into more technical specialist roles. In return, the successful applicant will benefit from first class product training, recognised by the industry, which will run on an ongoing basis as new products are introduced. A generous remuneration package is also guaranteed, including competitive salary, company van, bonus, healthcare, contributory pension scheme, phone and laptop, along with the opportunity to progress your career within a market leading organisation. This vacancy is being advertised by TRS Consulting Services Limited. The services advertised by TRS Consulting Services Limited are those of an employment agency and / or employment business

Experienced Security & Data Engineer Salary: £38,000 - £48,000 p.a. + company van + healthcare + pension Location: Field-based (UK South East / South Central preferred) Employment Type: Full-time, Permanent Role Overview We are seeking an experienced and motivated Security & Data Engineer to join our growing team. The successful candidate will have a minimum of 5 years' experience installing and commissioning electronic security and structured cabling systems. You'll take ownership of taking project install from start to finish, manage first-fix subcontractors or trainees, and deliver work to the highest standards of safety and professionalism. Key Responsibilities Installation, servicing, and commissioning of CCTV, Intruder, Access Control, Intercom, and Data Cabling systems Oversee and support assistant engineers or subcontractors during project delivery Ensure all installations comply with relevant standards and customer specifications Conduct site surveys, produce as-fitted documentation, and liaise with clients professionally, including training on the systems Work autonomously or as part of a wider project team Provide technical input for ongoing system improvements and learn new technologies Requirements Experience within a security systems company Proven experience with systems such as Texecom, Paxton, Hikvision, Avigilon, Gallagher, Urmet, 2N, NX. Strong fault-finding, cabling, commissioning and general practical skills Full UK driving licence and permission to work in UK BS7858 vetting and enhanced DBS clearance required (or eligibility to obtain) Excellent communication, leadership, and time management skills Desirable Experience mentoring or supervising junior engineers IP networking and fibre termination knowledge ECS/CSCS, IPAF, or PASMA certification What We Offer £35,000 - £45,000 salary (dependent on experience) Company van, tools and uniform provided Private healthcare & pension scheme (after probation period) Career progression to Senior Commissioning Engineer / Project Manager Ongoing manufacturer and in-house training

You're an experienced, hands-on Electronic Technician / Engineer with good fault finding diagnostic and repair skills at a component /PCB board level. Maybe you've got an assembly or repair background and want to do more? We don't do micromanagement - so you've got to have a detail oriented, organised and structured approach to work. BASIC SALARY: Up to £40,000 · 25 days holiday rising with service · Full access to company benefits package including pension · Flexible working within core hours LOCATION: Watford COMMUTABLE LOCATIONS: Hemel Hempstead, St. Albans, Hatfield, Cheshunt, Harrow, Wembley, Hayes, High Wycombe, Amersham, Chesham, Berkhamsted, Tring, Luton, Dunstable, Hatfield, Welwyn Garden City, Stevenage, Slough, Maidenhead, Milton Keynes, Hitchin, Bletchley. WHY SHOULD I APPLY? · Friendly, close knit, experienced team of Electronic / Electrical Engineers - with a great team spirit · Work life balance is important! Come in, do your job, leave at a sensible hour · With 100 years in business - we're not going anywhere. Stable, reliable job - and a great place to work JOB DESCRIPTION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB Based at the Watford site and working in our the test / calibration lab alongside a team of Calibration Engineers and a department manager. This role requires independent problem solving, and the ability to carry out repairs and adjustments on complex test equipment and instrumentation. You'll also be a key player in maintaining the integrity and performance of critical lab equipment - whilst also supporting and mentoring junior team members. You will occasionally support with calibration of equipment as required by the business. PERSON SPECIFICATION: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB · An experienced, hands-on Electronic Engineer with good soldering, fault finding diagnostic and repair skills at a component / board level · You've got a detail oriented, organised and structured approach to work · Your experience could come from electronic repair, assembly, calibration, testing etc. Any exposure to calibration labs would be a bonus. THE COMPANY: We're approaching 100 years in business, we're a well-respected manufacturer and brand of portable & hand-held electronic instrumentation. With a heavy focus and investment on R&D and New Product Development, we're genuinely a market leader for innovation in our industry sector. PROSPECTS: Regular salary reviews and potential to develop your career with a well established and growing business. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Technician, Electronic Engineer - Repair, Fault Find, Calibrate, Instrumentation, PCB, Soldering - Testing Lab, Calibration Lab INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18414, Wallace Hind Selection

KO2’s client, an innovative electronic product development company based in St Albans, is seeking a hands-on Electronics Engineer to strengthen their technical validation and optimise hardware design. As an Electronics Engineer, you will act as the technical bridge between product vision and suppl

Job title: Electronic Design Engineer. The Electronic Engineer develops integrated hardware solutions, both utilising COTS components and designing bespoke systems, through design, development, verification, and validation. General Electronic and Electrical Engineering (degree level).

As part of a multidisciplinary engineering and science team, they are seeking an Electronic Instrumentation Engineer to support the development of innovative laboratory instrumentation used in advanced sequencing technologies and diagnostic devices. Degree or equivalent experience in Electronic Engi

Electronic EngineerOur client is now seeking a talented and motivated Electrical/Electronics Engineer to join their team in North Yorkshire. They are ideally seeking a recent graduate in electrical/electronics engineer.

Electronic Warfare Systems Engineer Porton Down (SP4) Perm - Full Time On-siteSalary £50,000 - £65,000 DOE25 days annual leave inclusive of up to 3 days Christmas shut-downBuy or sell up to 5 days annual leaveAnnual Wellbeing allowanceTwo pension schemes to choose fromPrivate Medical Insurance +

Job Title: Test Engineer Location: Lymington, Hampshire Salary: £35,000 to £45,000 basic + benefits On-site Test Engineer – Electronic Instrumentation – R&D & Test Development We are recruiting for an Embedded Test Engineer to join an established engineering and R&D team developing advanced e

Umbrella inside IR35 Duration: 6 months Role Overview BAE Systems is recruiting multiple Electronic Design Engineers to support various specialist engineering teams across defence programmes. Client: BAE Systems Job Type: Contract Job Title: Electronic Design Engineer x 4 Location: Portsmouth Mon-T

About The RoleEngineered to Protect, thats our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world. This role will own complex designs, mentor engineers, and ensure.

Are you an experienced Electronic Test Engineer with a strong background in electronic manufacturing and production test? This is an exciting job opportunity to join a globally recognised leader in switching and instrumentation technology, working at the forefront of the test and measurement industr

Senior Electronic Engineer – Defence Industry/Anti-submarine warfare Location: Weymouth or Greenford (Hybrid – 2–3 days onsite per week) • 37 hours per week with flexible working hours (10am-3pm are core hours) • UK Eyes Only – Must be eligible for SC Clearance About the Role We are

We’re seeking a Senior Engineer to join a collaborative, high-performing team delivering sophisticated electronic solutions that sit at the heart of complex systems. We’re looking for an engineer with:. Experience in analogue and/or digital electronic design.

Are you an Electronic Design Engineer looking to step up into a more senior, responsible and autonomous position within a cutting-edge R&D team? Do you have experience with hardware and embedded firmware - and want a varied and dynamic role within a well established and successful business? Based at

Electronics Design EngineerLocation: Cambourne, Cambridge (On-site)Join a world-leading technology organisation developing advanced electronic systems for cutting-edge scientific instrumentation. This is a hands-on electronics design role where you'll take designs from initial concept through to ver

Essential Skills & ExperienceElectronic circuit design (digital and/or analogue)PCB design and layout (Altium or similar)Degree in Electronic Engineering (or related)Good written and verbal communication ski. We are looking for an experienced Electronic Design Engineer to join our client based in Fa

Electronic Manufacturing Engineer (SMT Machines)£35,000 - £45,000 + Training + Progression + Company BenefitsHart, HampshireAre you a Manufacturing Engineer, Production Engineer or similar with a background using SMT machines, looking to broaden your technical expertise in production and programmi

We are seeking an experienced Development & Production Test Engineer with a strong Electronic/Electrical engineering background to support missile sub-systems during the production phase. Development & Production Test Engineer Electronics (Defence)Location: BoltonGuidant Global is proud to partner

Company ProfileTotal IT is an award-winning technology services and systems integration business founded in 2006, with offices in Bedford, London, and Dubai.We operate at the intersection of IT, cyber security, networks, and smart building technology, supporting some of the largest and most complex

Job Title: Senior Electronic Design Engineer - Analogue/Digital Location: Southampton, Hampshire Salary: £50,000 to £60,000 basic + bonus + benefits My client designs and manufactures complex electronic products and systems that are used all over the world. They are looking for an Electronic Desi

Senior Power Electronic Design Engineer Location: Gatwick, West Sussex Salary: £50,000 – £65,000 Job Type: Full-time, Permanent We're recruiting on behalf of a well-established engineering business based in Gatwick that designs and manufactures high-reliability power electronics for demanding ap

Programming of PIC microcontrollers in C Prototyping and Breadboarding PCB layout design using Altium Design for CE marking, EMC and Low Voltage Directive (training provided) Test and validate internally and through external approval bodies About You As an Electronics Design Engineer, you should ha

We are seeking a dynamic, driven and exceptional engineer to work on breakthrough technologies in vehicle dynamics. You will play a pivotal role inthe design and development of electrical and electronic systems for activewheel alignment technologies.

Test Engineer – Electronics (Defence) Rate: £25. PAYE £34–£37 Umbrella On behalf of our client, Morson are looking for an experienced Test Engineer to provide technical support to the manufacture and development testing of complex weapons sub-systems. This role supports pr

A leading gaming company in the UK seeks an experienced Software Engineering Leader to provide technical leadership and manage a team of server engineers.

We are currently seeking an ICTS Project Engineer who will play a critical role in delivering innovative security systems for our clients. Additionally, there may be a requirement to continue in the role of Senior Installation Engineer, depending on workloads.

A well-respected manufacturer of portable electronic devices in the UK is seeking an experienced Electronic Design Engineer. In this role, you will design and develop electronic circuitry and firmware for portable equipment, ensuring compliance with legal standards.