Trabajos green en StaffordCrear alertas

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support.Why become a driving instructor with My Four Wheels?Lesson rates typically average around £38 per hourEarn up to £39k per year working 32 hours/weekWorking 40 hours/weeks will earn an average of £50,000+Work the hours you want - weekdays, evenings, weekends, part-time or full-timeTeach locally (typically within a 30-minute radius, covering 6–8 postcodes)Dual-control car options available via partner providersStart earning sooner – You can apply for a Trainee License after DVSA Part 2Training fees can be paid back in full after 1 year (ask for details)New Training Academy – Full Training ProvidedYou'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence.DVSA RequirementsTo apply, you must:Hold a full UK driving licence for 3+ yearsHave no more than 5 penalty pointsHave no driving bans in the last 5 yearsApply todaySubmit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support.Why become a driving instructor with My Four Wheels?Lesson rates typically average around £38 per hourEarn up to £39k per year working 32 hours/weekWorking 40 hours/weeks will earn an average of £50,000+Work the hours you want - weekdays, evenings, weekends, part-time or full-timeTeach locally (typically within a 30-minute radius, covering 6–8 postcodes)Dual-control car options available via partner providersStart earning sooner – You can apply for a Trainee License after DVSA Part 2Training fees can be paid back in full after 1 year (ask for details)New Training Academy – Full Training ProvidedYou'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence.DVSA RequirementsTo apply, you must:Hold a full UK driving licence for 3+ yearsHave no more than 5 penalty pointsHave no driving bans in the last 5 yearsApply todaySubmit your details now and our team will contact you to explain the training route, timescales and next steps.

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK. If you're looking for a career change with great earning potential, flexible working, and genuine job satisfaction, this could be the opportunity you've been waiting for. No previous experience is required - we provide full training and ongoing support.Why become a driving instructor with My Four Wheels?Lesson rates typically average around £38 per hourEarn up to £39k per year working 32 hours/weekWorking 40 hours/weeks will earn an average of £50,000+Work the hours you want - weekdays, evenings, weekends, part-time or full-timeTeach locally (typically within a 30-minute radius, covering 6–8 postcodes)Dual-control car options available via partner providersStart earning sooner – You can apply for a Trainee License after DVSA Part 2Training fees can be paid back in full after 1 year (ask for details)New Training Academy – Full Training ProvidedYou'll train through our new Training Academy, designed for complete beginners. Training combines online learning, live classroom support and structured in-car coaching. We guide you through DVSA Parts 1, 2 and 3 and provide lesson plans, resources and ongoing support to help you qualify with confidence.DVSA RequirementsTo apply, you must:Hold a full UK driving licence for 3+ yearsHave no more than 5 penalty pointsHave no driving bans in the last 5 yearsApply todaySubmit your details now and our team will contact you to explain the training route, timescales and next steps.

Become part of a winning team and help to deliver the Green Energy transition. The Senior Project Engineering Lead is accountable for the delivery of the HVDC Control, Protection, Automation and V&V scope of work for a project in strict accordance with the cost, time and technical requirements of that project and in‑line with any operational processes that the project may use as part of its execution. This shall be achieved through the efficient management of the C&P department resources allocated to the project and by the application of the processes coming from the relevant C&P functions, whilst always working in close collaboration with the C&P functional leaders towards the common objective of successful project delivery. This person is accountable for overall C&P engineering activities, manages engineering budget, defines the quality plan, implements change management process, supervises, governs and leads all C&P engineering activities required to execute the project, whether in house or by suppliers/subcontractors. This person is also responsible to review & develop project execution process, propose improvements to existing process and align it with the overall GE Vernova process. • Manage and deliver the HVDC Control, Protection, Automation and V&V scope of work for a project focusing on the close adherence to the global time schedule of engineering scope, ensuring the coherency of links between engineering activities and other project functions activities (NPI, Design, Procurement, manufacturing, V&V, commissioning) and anticipate and mitigate project delivery issues of concerned activities., • Carry out regular and thorough reviews of the progress and delivery of the Control, Protection, Automation and V&V scope of work assessing all aspects of the project, including time, cost, quality, and risks., • Prepare and deliver a comprehensive project report as part of the governance of the project and as part of the reporting process for the overall project - This shall be done at least monthly., • Ensure that the provided resources are used efficiently and working in accordance with the established processes via rigorous and open collaboration with the C&P functions, • Plan and manage technical interfaces, put in place exchange interface sheets with partners, customers, and third‑party contractors., • Accountable for project delivery Key Performance Indicators (KPIs) such as First Time Yield (FTY's), On-Time Delivery (OTD) and budget for C&P scope including adherence to Quality, compliance to standards and regulations., • Providing leadership and supporting solution engineer to ensure the reference solution and the agreed gaps are delivered in accordance with the project technical specifications and rigorously enforcing the change process and policy on any deviations, • Motivate and empower project engineering team, insights and rewards to the team and provide feedback on project team to their respective functional managers during performance reviews., • Maintain and manage lessons learned from cross projects and ensure the lessons learned are flowed in improvement of process, and solution., • Assess risks including risk mitigation plans and ensure the risks are communicated at all project level., • Conduct project risk review meeting and update risk register with mitigation plan when required, • Request / attend Customer technical meetings when needed/upon request, • Check effectiveness of design against delivery of contract requirements within project budget and look for global cost optimization in all design phase and mainly during basic design, • Apply Design subcontracting process and support Sourcing and Procurement in the definition of the Supplier's list, in the equipment ITO and FAT procedure review, and during post order stage according to the project strategy, • Develop and enhance continuous improvement within C&P Project community and be responsible to design new project governance processes and to upgrade existing processes., • Engineering degree level or equivalent education in Electrical Engineering, • Extensive experience, of which 5 to 10 projects in a position of Lead Project Engineer, managing medium set projects, across several project contexts (technology, scope, contract environment) in EPC type environment in T&D, Power Gen or Oil & Gas industry, • Mastering of involved discipline (process, tools, technical aspects) and successful experience in management of multi-disciplinary teams with multiple interfaces and with products coming from several countries, • Provide technical leadership, advice and assistance to the overall project team as appropriate., • Support the Project (Engineering) Manager as required and delegates for them as and when the need arises. Plan and progress all design engineering related activities including testing and commissioning for specific projects., • Monitor, control and manage engineering budgets, project documentatio #J-18808-Ljbffr

Manpower Group (UK) is seeking an Automation Engineer for a 5-month contract in Stafford. The role forms part of the Grid System Integration team, delivering protection settings, HV studies, and energy projects to support the Green Energy Transition. You will work with DIgSILENT PowerFactory and Alpi Caneco BT, performing energisation and fault level studies while advising on protection schemes and collaborating with tendering and project teams. #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. As a Lead Project Engineer, you will be responsible for leading a team that designs, develops, configuration and Verification of HVDC Control& Protection System and, drive consistent design practices, common global processes for projects implementation and provide technical solution that meets the project objectives. The role gives an excellent opportunity for a motivated engineer to expand their project management skills and personal development within an international project organisation delivering complex HVDC system. Our Lead Project Engineers are essential to the successful executions of our projects. You will provide technical leadership to other engineers and customer facing teams, they oversee each phase of the project delivery to make sure that we deliver valuable systems solutions with an excellent operational rigor. In this role you will: • Lead a multidiscipline team of engineers specialising in control and protection system, automation system, HV & LV power systems, and verification & Validation ensuring the overall solution meets customer, contract, quality and regulatory requirements., • Provide technical leadership, advice and assistance to the overall project team as appropriate including Tendering, Commissioning, Service and 3rd parties., • Support the Project (Engineering) Manager as required and deputise for them as and when the need arises., • Plan and progress all design engineering related activities including testing and commissioning for specific projects., • Monitor, control and manage engineering budgets, project documentation, risk management process, design reviews and quality & change control system in accordance with company guidelines., • Support improvement initiatives and ‘cost out’ plans in collaborations with teams from other business units., • Act as primary technical & project interface with all project stakeholders, including customers, suppliers, NPI and Product care Ensuring that all activities are efficiently and cost-effectively executed according to contract specifications, quality standards and safety requirements., • Manage and lead the team to successfully execute projects with adherence to the project schedule, cost and contract., • Lead and motivate a group of technical people., • Act as a problem solver and take responsibility for control & protection along with automation of HVDC solutions., • Day-to-day interaction with different functions and joint problem solving within the core team for efficient collaboration and continuous competency development., • Experience in an engineering & project leadership environment., • Experience in application engineering in one or more fields, from controls engineering, protection, automation, HVDC, and grid connected systems., • Experience in project execution of HVDC or similar., • Experience of design and system integration working on complex multi-disciplinary projects., • Controls & Protection of HV & LV system., • Experience of owning the job, making it their own, and adding value beyond., • Capable of leading large multi-disciplinary teams., • Ability to multi-task on a variety of tasks to strict time scales., • Significant analytical, interpersonal, communication, presentation and facilitation skills., • Customer-centric mind set, experience in translating customer issues / needs into profitable business solutions., • Min Degree in Electrical / Electronic Engineering or Project Management & equivalent degree with suitable industry experience., • Significant and demonstrated years of experience in Control & Protection system and have advanced problem-solving skills., • A great sense of urgency and ability to identify and manage team organisational risks., • Proven skills in managing and leading team with strong technical background Excellent written and verbal communication skills., • Able to work to deadlines under pressure whilst maintaining the safety, quality, and engineering integrity of the solution., • Must be flexible with working hours and willing to travel globally., • Extensive oral and written communication skills., • Advanced interpersonal and leadership skills, experienced in creating and presenting to other stake holders., • Demonstrated ability to analyse and resolve problems., • Demonstrated ability to lead programs / projects., • Ability to document, plan, and execute programs., • Established project management skills., • Proven technical leadership in a complex functional engineering development environment., • Experienced in technical leadership and Project management, people leader., • Ability to mentor & coach project engineers. GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition – and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GEV, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. • A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, • Competitive benefits, • Great development opportunities, • Private health insurance Relocation Assistance Provided: No Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different…we must be different. Our mission is embedded in our name. We retain our treasured legacy, “GE,” in our name as an enduring and hard-earned badge of quality and ingenuity. “Ver” / “verde” signal Earth’s verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. www.gevernova.com #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. As a Lead Project Engineer, you will be responsible for leading a team that designs, develops, configuration and Verification of HVDC Control& Protection System and, drive consistent design practices, common global processes for projects implementation and provide technical solution that meets the project objectives. The role gives an excellent opportunity for a motivated engineer to expand their project management skills and personal development within an international project organisation delivering complex HVDC system. Our Lead Project Engineers are essential to the successful executions of our projects. You will provide technical leadership to other engineers and customer facing teams, they oversee each phase of the project delivery to make sure that we deliver valuable systems solutions with an excellent operational rigor. In this role you will: • Lead a multidiscipline team of engineers specialising in control and protection system, automation system, HV & LV power systems, and verification & Validation ensuring the overall solution meets customer, contract, quality and regulatory requirements., • Provide technical leadership, advice and assistance to the overall project team as appropriate including Tendering, Commissioning, Service and 3rd parties., • Support the Project (Engineering) Manager as required and deputise for them as and when the need arises., • Plan and progress all design engineering related activities including testing and commissioning for specific projects., • Monitor, control and manage engineering budgets, project documentation, risk management process, design reviews and quality & change control system in accordance with company guidelines., • Support improvement initiatives and ‘cost out’ plans in collaborations with teams from other business units., • Act as primary technical & project interface with all project stakeholders, including customers, suppliers, NPI and Product care, • Ensuring that all activities are efficiently and cost-effectively executed according to contract specifications, quality standards and safety requirements., • Manage and lead the team to successfully execute projects with adherence to the project schedule, cost and contract., • Lead and motivate a group of technical people., • Act as a problem solver and take responsibility for control & protection along with automation of HVDC solutions., • Day-to-day interaction with different functions and joint problem solving within the core team for efficient collaboration and continuous competency development. To be a successful in this role, you should have: • Experience in an engineering & project leadership environment., • Experience in application engineering in one or more fields, from controls engineering, protection, automation, HVDC, and grid connected systems., • Experience in project execution of HVDC or similar., • Experience of design and system integration working on complex multi-disciplinary projects., • Controls & Protection of HV & LV system., • Experience of owning the job, making it their own, and adding value beyond., • Capable of leading large multi-disciplinary teams., • Ability to multi-task on a variety of tasks to strict time scales., • Significant analytical, interpersonal, communication, presentation and facilitation skills., • Customer-centric mind set, experience in translating customer issues / needs into profitable business solutions. Qualifications • Min Degree in Electrical / Electronic Engineering or Project Management & equivalent degree with suitable industry experience., • Significant and demonstrated years of experience in Control & Protection system and have advanced problem-solving skills., • A great sense of urgency and ability to identify and manage team organisational risks., • Proven skills in managing and leading team with strong technical background, • Excellent written and verbal communication skills., • Able to work to deadlines under pressure whilst maintaining the safety, quality, and engineering integrity of the solution., • Must be flexible with working hours and willing to travel globally. Desired Characteristics • Extensive oral and written communication skills., • Advanced interpersonal and leadership skills, experienced in creating and presenting to other stake holders., • Demonstrated ability to analyse and resolve problems.Demonstrated ability to lead programs / projects., • Ability to document, plan, and execute programs., • Established project management skills., • Proven technical leadership in a complex functional engineering development environment., • Experienced in technical leadership and Project management, people leader., • Ability to mentor & coach project engineers About Us: GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition – and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. About GEV Grid Solutions: At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. Why we come to work: At GEV, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: • A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, • Competitive benefits, and great development opportunities - including private health insurance. Relocation Assistance Provided: No #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. As a Senior Lead Control & Protection System Engineer, you will report to the Control System Application Manager. You will be part of a highly motivated and dynamic team of engineers working on the design of Control and Protection functions for HVDC schemes. The development of such Control system is technically challenging and involves a variety of engineering disciplines, contribution through teamwork and an innovative approach. You will be expected to study and mentor others on the existing designs of specified project and functionalities in MATLAB / Simulink and transfer them to the PSCAD simulation environment across the full delivery process life cycle, including but not limited to plant model design and maintenance, verification model in MATLAB, creating test harness for conversion, writing model guides, and evaluating models in PSCAD. • Support the business’ Tendering, Operations, Contractual and After Sales needs regarding:, • Defining control system requirements., • HVDC System in electromagnetic transient tools like PSCAD, EMTP-RV etc., • Plant modelling in various simulation tools (MATLAB, PSCAD etc) and its verification., • Dynamic Performance Studies (DPS) and other design studies using both offline and online simulation tools., • Control and protection parameters tuning to meet grid stability criteria specified in customer technical specifications., • Conversion of MATLAB Simulink algorithms to PSCAD models., • Support improvements to existing algorithm / strategies for power fault recovery or instability issues during DPS studies., • Contribute to development of new strategies for control, protection, and sequencing (start-up / shut down sequence) to meet customer technical specifications if required., • Proposing continual improvement activities for improving the effectiveness and efficiency of control application team through the introduction of tools, methods, and process improvements., • Support a standard product methodology mindset, seek opportunities to re-use solutions, improve quality and reliability whilst reducing the delivery timeline and associated costs., • Technical accountability as a technical leader in engineering design reviews, identifying potential project risks and technical weaknesses and proposing safe, reliable, and compliant solutions., • Understand the key milestones in a project plan, their financial impact and ensuring the technical risks are understood and mitigated in accordance with the plan to meet on time project delivery., • Ensure that project plans contain the necessary activities and studies required to meet the requirements of the customer and the proposed technical solution., • Lead and mentor others on development of new strategies for control, protection, and sequencing (start-up/shut down sequence) to meet customer technical specifications if required., • Proposing and leading continual improvement activities for improving the effectiveness and efficiency of control application team through the introduction of tools, methods, and process improvements., • Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business., • Advanced and demonstrated experience in HVDC industry including HVDC station equipment and design., • Proven skills in managing and leading team with an excellent technical background., • Experienced in Protection & Control system design application and have strong problem-solving skills., • Exceptional oral and written communication skills., • Strong interpersonal and leadership skills., • Proven technical leadership in a complex system engineering development environment., • Ability to understand and communicate customer requirements, ownership of technical discussions with customers and capable of developing client relationships., • Competent on functional characteristics of power systems and understand the interactions between AC and HVDC systems and knowledge of HVDC Control, Protection and Sequencing strategy., • Experience in PSCAD and MATLAB-SIMULINK simulation tools. At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GE Renewable Energy, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Relocation Assistance Provided: No Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different...we must be different. Our mission is embedded in our name. We retain our treasured legacy, GE, in our name as an enduring and hard-earned badge of quality and ingenuity. Ver / verde signal Earth’s verdant and lush ecosystems. Nova, from the Latin novus, nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. www.gevernova.com #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. The Senior Project Engineering Lead is accountable for the delivery of the HVDC Control, Protection, Automation and V&V scope of work for a project in strict accordance with the cost, time and technical requirements of that project and in-line with any operational processes that the project may use as part of its execution. This shall be achieved through the efficient management of the C&P department resources allocated to the project and by the application of the processes coming from the relevant C&P functions, whilst always working in close collaboration with the C&P functional leaders towards the common objective of successful project delivery. This person is accountable for overall C&P engineering activities, manages engineering budget, defines the quality plan, implements change management process, supervises, governs and leads all C&P engineering activities required to execute the project, whether in house or by suppliers/subcontractors. This person is also responsible to review & develop project execution process, propose improvements to existing process and align it with the overall GE Vernova process. Manage and deliver the HVDC Control, Protection, Automation and V&V scope of work for a project focusing on the close adherence to the global time schedule of engineering scope, ensuring the coherency of links between engineering activities and other project functions activities (NPI, Design, Procurement, manufacturing, V&V, commissioning) and anticipate and mitigate project delivery issues of concerned activities. Carry out regular and thorough reviews of the progress and delivery of the Control, Protection, Automation and V&V scope of work assessing all aspects of the project, including time, cost, quality, and risks. Prepare and deliver a comprehensive project report as part of the governance of the project and as part of the reporting process for the overall project - This shall be done at least monthly. Ensure that the provided resources are used efficiently and working in accordance with the established processes via rigorous and open collaboration with the C&P functions Plan and manage technical interfaces, put in place exchange interface sheets with partners, customers, and third-party contractors. Accountable for project delivery Key Performance Indicators (KPIs) such as First Time Yield (FTY's), On-Time Delivery (OTD) and budget for C&P scope including adherence to Quality, compliance to standards and regulations. Providing leadership and supporting solution engineer to ensure the reference solution and the agreed gaps are delivered in accordance with the project technical specifications and rigorously enforcing the change process and policy on any deviations Motivate and empower project engineering team, insights and rewards to the team and provide feedback on project team to their respective functional managers during performance reviews. Maintain and manage lessons learned from cross projects and ensure the lessons learned are flowed in improvement of process, and solution. Assess risks including risk mitigation plans and ensure the risks are communicated at all project level. Conduct project risk review meeting and update risk register with mitigation plan when required Request / attend Customer technical meetings when needed/upon request Check effectiveness of design against delivery of contract requirements within project budget and look for global cost optimization in all design phase and mainly during basic design Apply Design subcontracting process and support Sourcing and Procurement in the definition of the Supplier's list, in the equipment ITO and FAT procedure review, and during post order stage according to the project strategy Develop and enhance continuous improvement within C&P Project community and be responsible to design new project governance processes and to upgrade existing processes. Engineering degree level or equivalent education in Electrical Engineering Extensive experience, of which 5 to 10 projects in a position of Lead Project Engineer, managing medium set projects, across several project contexts (technology, scope, contract environment) in EPC type environment in T&D, Power Gen or Oil & Gas industry Mastering of involved discipline (process, tools, technical aspects) and successful experience in management of multi-disciplinary teams with multiple interfaces and with products coming from several countries Provide technical leadership, advice and assistance to the overall project team as appropriate. Support the Project (Engineering) Manager as required and delegates for them as and when the need arises. Plan and progress all design engineering related activities including testing and commissioning for specific projects. Monitor, control and manage engineering budgets, project documentation, risk management process, design reviews and quality & change control system in accordance with company guidelines. Support improvement initiatives and 'cost out' plans in collaborations with teams from other business units. Fluent in English and Demonstrated presentation skills and ability to succinctly communicate complex messages Demonstrates ownership & accountability, judgment and decision making, influences & inspires team, relationship building skills and strong technical problem-solving skills and experience, creates a vision and strategy, and has passion for the role. Takes a critical look at current operations to ensure effectiveness and if necessary, suggests improvement areas Uses experience and instinct to make relevant decisions in expertise domain to meet deadlines and integrates risk-taking if necessary. Mastering of involved disciplines (process, tools, technical aspects) and successful experience in management of multi-disciplinary teams with multiple interfaces and with products coming from several countries Understanding of HVDC C&P functionality for VSC & LCC Converters Willingness to work in different locations for short or medium periods and to travel worldwide. Take on challenges and find solutions from customer viewpoint GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition – and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GEV, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Relocation Assistance Provided: No Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different…we must be different. Our mission is embedded in our name. We retain our treasured legacy, “GE,” in our name as an enduring and hard-earned badge of quality and ingenuity. “Ver” / “verde” signal Earth’s verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. www.gevernova.com #J-18808-Ljbffr

Job Description Summary Become part of a winning team and help to deliver the Green Energy transition. GE Vernova is seeking a Lead Hardware Engineer to design and support embedded hardware platforms used in energy and power systems. This role combines deep technical problem-solving, support of R&D and manufacturing, and local technical leadership, while operating as part of a globally distributed engineering organisation. As the successful candidate, you will work across the full product lifecycle (PCBs, bespoke processors, board obsolescence etc) from new product introduction (NPI) through to sustaining engineering, and manufacturing, and will be seen as the technical anchor for a UK-based hardware support team across multiple product ranges. Design and troubleshoot complex analogue, digital, and mixed-signal electronics issues at board and system level, including Ethernet technologies. Redesign up to Core CPU level with High-Speed Memory constraints, using complex FPGA and CPLD Architecture. Provide design support for Control and Protection hardware designs across development, manufacturing, and deployed systems. Review and support schematics, PCB layouts, and design documentation. Collaborate closely with firmware, systems, safety, and verification teams during design, and test development teams during outsource activities. Support R&D activities including prototype bring-up, validation, and verification testing. Contribute to design-for-manufacture (DFM), design-for-test (DFT), reliability, and serviceability improvements. Support engineering change management, component selection, and obsolescence mitigation. Assist with transition from development into manufacturing and volume production. Provide technical support to manufacturing sites and contract manufacturers. Support production test development and resolution of yield or test failures. Interface with suppliers on component quality, technical issues, using structured root cause analysis (RCA) to drive corrective and preventive actions (CAPA). Demonstrate technical leadership within GE Vernova's global R&D and engineering structure. Act as a key technical interface between UK engineering, global R&D teams, and manufacturing. Contribute to continuous improvement of engineering processes and knowledge sharing. Formal Qualification in Electronics Discipline; Degree Level preferred however HNC / HND level with proven industry involvement accepted. Advanced design background in analogue and digital electronics, including mixed-signal designs. Experience with embedded hardware systems in industrial or energy-related applications. Proven hands-on troubleshooting skills using standard lab equipment (oscilloscope, logic analyser, DMM, etc.). Ability to interpret schematics, PCB layouts, and technical reports. Understanding of hardware reliability, failure analysis, and lifecycle support. Knowledge of EMC testing and CAD packages (Altium - highly desirable) PCB Layout Design Advanced FPGA experience Experience Experience supporting hardware across R&D, NPI, and manufacturing. Exposure to manufacturing support, production test, and supplier engagement. Experience working in global matrixed engineering organizations. Some technical leadership or team coordination experience preferred. Structured problem-solving mindset. Clear and effective technical communication. Ability to manage multiple technical issues and small projects in parallel. Comfortable working in regulated, safety-critical, or high-reliability environments. Design Experience with energy, power electronics, grid, or industrial control systems. Knowledge of relevant standards (e.g., safety, EMC, environmental). Prior experience in sustaining engineering, field support, or reliability engineering roles. GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition - and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GEV, our engineers are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. No Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different... we must be different. Our mission is embedded in our name. We retain our treasured legacy, "GE", in our name as an enduring and hard-earned badge of quality and ingenuity. "Ver" / "verde" signal Earth's verdant and lush ecosystems. "Nova," from the Latin "novus," nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. www.gevernova.com #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. Become part of a winning team and help to deliver the Green Energy transition. As a Senior Lead Control & Protection System Engineer, you will report to the Control System Application Manager. You will be part of a highly motivated and dynamic team of engineers working on the design of Control and Protection functions for HVDC schemes. The development of such Control system is technically challenging and involves a variety of engineering disciplines, contribution through teamwork and an innovative approach. You will be expected to study and mentor others on the existing designs of specified project and functionalities in MATLAB / Simulink and transfer them to the PSCAD simulation environment across the full delivery process life cycle, including but not limited to plant model design and maintenance, verification model in MATLAB, creating test harness for conversion, writing model guides, and evaluating models in PSCAD. Support the business’ Tendering, Operations, Contractual and After Sales needs regarding: • Defining control system requirements., • HVDC System in electromagnetic transient tools like PSCAD, EMTP-RV etc., • Plant modelling in various simulation tools (MATLAB, PSCAD etc) and its verification., • Dynamic Performance Studies (DPS) and other design studies using both offline and online simulation tools., • Control and protection parameters tuning to meet grid stability criteria specified in customer technical specifications., • Conversion of MATLAB Simulink algorithms to PSCAD models., • Support improvements to existing algorithm / strategies for power fault recovery or instability issues during DPS studies., • Contribute to development of new strategies for control, protection, and sequencing (start-up / shut down sequence) to meet customer technical specifications if required., • Proposing continual improvement activities for improving the effectiveness and efficiency of control application team through the introduction of tools, methods, and process improvements., • Support a standard product methodology mindset, seek opportunities to re-use solutions, improve quality and reliability whilst reducing the delivery timeline and associated costs., • Technical accountability as a technical leader in engineering design reviews, identifying potential project risks and technical weaknesses and proposing safe, reliable, and compliant solutions., • Understand the key milestones in a project plan, their financial impact and ensuring the technical risks are understood and mitigated in accordance with the plan to meet on time project delivery., • Ensure that project plans contain the necessary activities and studies required to meet the requirements of the customer and the proposed technical solution., • Lead and mentor others on development of new strategies for control, protection, and sequencing (start-up/shut down sequence) to meet customer technical specifications if required., • Proposing and leading continual improvement activities for improving the effectiveness and efficiency of control application team through the introduction of tools, methods, and process improvements., • Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business., • Advanced and demonstrated experience in HVDC industry including HVDC station equipment and design., • Proven skills in managing and leading team with an excellent technical background., • Experienced in Protection & Control system design application and have strong problem solving skills., • Exceptional oral and written communication skills. Strong interpersonal and leadership skills., • Proven technical leadership in a complex system engineering development environment., • Ability to understand and communicate customer requirements, ownership of technical discussions with customers and capable of developing client relationships., • Competent on functional characteristics of power systems and understand the interactions between AC and HVDC systems and knowledge of HVDC Control, Protection and Sequencing strategy., • Experience in PSCAD and MATLAB-SIMULINK simulation tools. At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GE Renewable Energy, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. • A key role in a dynamic, international working environment with a large degree of flexibility of work agreements, • Competitive benefits, and great development opportunities - including private health insurance., • Relocation Assistance Provided: No #J-18808-Ljbffr

Role: Automation Engineer Location: Stafford Duration: 5 months Rate: £80/hour Inside IR35: Umbrella The Grid System Integration (GSI) business delivers a wide range of projects associated with the bulk transmission of electrical power and management of electrical power grids. These projects typically include: • New high voltage transmission substations., • Expansion and reinforcement of existing transmission substations and networks., • Onshore and Offshore substations to facilitate windfarm connections and other renewable technologies., • Network compensation and stability projects, • Energy storage projects The candidate will be part of a small yet diverse and sought-after team of Protection Settings Engineers working as part of the larger team of engineers to deliver High Voltage AC & DC substations and Offshore windfarms, battery energy storage and green hydrogen production opportunities to support the Green Energy Transition. The candidate must hold National Grid Settings Authorisation certification. Industrial experience in AC substation design and primary plant, with an understanding of protection, control/SCADA, OT cybersecurity, telecom, metering, CT/VT specifications, and substation integration, is highly desirable. • Prepare high voltage protection settings calculations e.g. low impedance feeder differential and distance protections, transformer biased differential protections, and low impedance busbar protection calculations or high impedance busbar protection circulating current calculations., • Perform short-circuit fault level calculations manually to IEC60909 standard for symmetrical and unsymmetrical faults using sequence components., • Use power system analysis software (e.g., DIgSILENT PowerFactory) for fault level studies and protection grading/selectivity reports., • Conduct arc-flash analysis using tools such as Alpi Caneco BT for LVAC 400V systems., • Prepare first-time energisation circuit switching programs and automatic reclosure switching sequence reports., • Technical analysis of employer's requirements to define and optimise protection functionality selection., • Provide advisory support to project and tendering teams on protection related matters., • Apply judgment to propose different solutions outside set parameters with guidance., • Collaborate across internal teams to achieve results., • Actively participate in business improvement initiatives within the engineering department., • Offer support and mentorship to junior engineers in enhancing their professional engineering competencies., • Power Electrical Engineering Bachelor's degree (or higher) from an accredited university., • Design experience within the Electricity Transmission and Distribution industry., • Solid understanding of protection device and scheme principle of operation., • Previous use of a power system analysis and modelling software and Arc-flash analysis software preferred While previous experience is not compulsory, it is preferable if the candidate has a minimum of 7 years' experience in AC substation engineering. #J-18808-Ljbffr

The North and South Europe Grid System Integration (GSI) is seeking a Senior Protection Settings Engineer to join our dynamic projects business. This is an exciting opportunity to work alongside highly skilled engineers delivering protection settings studies for relays applied to High Voltage AC Transmission systems. Grid Solutions, a GE Renewable Energy business, serves customers globally with over 13,000 employees. We provide power utilities and industries worldwide with equipment, systems and services to ensure reliable and efficient power delivery from generation to end consumers. Our focus is on enabling safe and reliable integration of renewable and distributed energy resources into the grid, including HVDC, HVAC, FACTS, and service agreements. We electrify the world with advanced grid technologies and accelerate the energy transition. The Grid System Integration (GSI) business delivers a wide range of projects associated with the bulk transmission of electrical power and management of electrical power grids. These projects typically include: • New high voltage transmission substations, • Expansion and reinforcement of existing transmission substations and networks, • Onshore and Offshore substations to facilitate windfarm connections and other renewable technologies., • Network compensation and stability projects, • Energy storage projects The candidate will be part of a small yet diverse and sought-after team of Protection Settings Engineers working as part of the larger team of engineers to deliver High Voltage AC & DC substations and Offshore windfarms, battery energy storage and green hydrogen production opportunities to support the Green Energy Transition. Preferably, the candidate will have achieved National Grid Settings Authorisation certification or be working towards it in short term. Industrial experience in AC substation design and primary plant, with an understanding of protection, control/SCADA, OT cybersecurity, telecom, metering, CT/VT specifications, and substation integration, is highly desirable. • Prepare high voltage protection settings calculations e.g. low impedance feeder differential and distance protections, transformer biased differential protections, and low impedance busbar protection calculations or high impedance busbar protection circulating current calculations., • Perform short-circuit fault level calculations manually to IEC60909 standard for symmetrical and unsymmetrical faults using sequence components., • Use power system analysis software (e.g., DIgSILENT PowerFactory) for fault level studies and protection grading/selectivity reports., • Conduct arc‑flash analysis using tools such as Alpi Caneco BT for LVAC 400V systems., • Prepare first‑time energisation circuit switching programs and automatic reclosure switching sequence reports., • Technical analysis of employer’s requirements to define and optimise protection functionality selection., • Provide advisory support to project and tendering teams on protection related matters., • Apply judgment to propose different solutions outside set parameters with guidance., • Collaborate across internal teams to achieve results., • Actively participate in business improvement initiatives within the engineering department., • Offer support and mentorship to junior engineers in enhancing their professional engineering competencies., • Power Electrical Engineering Bachelor's degree (or higher) from an accredited university., • Design experience within the Electricity Transmission and Distribution industry., • Solid understanding of protection device and scheme principle of operation., • Previous use of a power system analysis and modelling software and Arc‑flash analysis software preferred., • Fluent oral and written English., • Ability to analyse and resolve problems., • Ability to plan and execute to very tight delivery schedules., • While previous experience is not compulsory, it is preferable if the candidate has a minimum of 7 years’ experience in AC substation engineering. Relocation Assistance Provided: No Addressing the climate crisis is an urgent global priority and we take our responsibility seriously. That is our singular mission at GE Vernova: continuing to electrify the world while simultaneously working to help decarbonize it. If we want our energy future to be different…we must be different. Our mission is embedded in our name. We retain our treasured legacy, “GE,” in our name as an enduring and hard‑earned badge of quality and ingenuity. “Ver” / “verde” signal Earth’s verdant and lush ecosystems. “Nova,” from the Latin “novus,” nods to a new, innovative era of lower carbon energy that GE Vernova will help deliver. Together, we have The Energy to Change the World. www.gevernova.com #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. Become part of a winning team and help to deliver the Green Energy transition. As a Lead Project Engineer, you will be responsible for leading a team that designs, develops, configuration and Verification of HVDC Control& Protection System and, drive consistent design practices, common global processes for projects implementation and provide technical solution that meets the project objectives. The role gives an excellent opportunity for a motivated engineer to expand their project management skills and personal development within an international project organisation delivering complex HVDC system. Our Lead Project Engineers are essential to the successful executions of our projects. You will provide technical leadership to other engineers and customer facing teams, they oversee each phase of the project delivery to make sure that we deliver valuable systems solutions with an excellent operational rigor. • Lead a multidiscipline team of engineers specialising in control and protection system, automation system, HV & LV power systems, and verification & Validation ensuring the overall solution meets customer, contract, quality and regulatory requirements., • Provide technical leadership, advice and assistance to the overall project team as appropriate including Tendering, Commissioning, Service and 3rd parties., • Support the Project (Engineering) Manager as required and deputise for them as and when the need arises., • Plan and progress all design engineering related activities including testing and commissioning for specific projects., • Monitor, control and manage engineering budgets, project documentation, risk management process, design reviews and quality & change control system in accordance with company guidelines., • Support improvement initiatives and ‘cost out’ plans in collaborations with teams from other business units., • Act as primary technical & project interface with all project stakeholders, including customers, suppliers, NPI and Product care, • Ensuring that all activities are efficiently and cost-effectively executed according to contract specifications, quality standards and safety requirements., • Manage and lead the team to successfully execute projects with adherence to the project schedule, cost and contract., • Lead and motivate a group of technical people., • Act as a problem solver and take responsibility for control & protection along with automation of HVDC solutions., • Day-to-day interaction with different functions and joint problem solving within the core team for efficient collaboration and continuous competency development., • Experience in an engineering & project leadership environment., • Experience in application engineering in one or more fields, from controls engineering, protection, automation, HVDC, and grid connected systems., • Experience in project execution of HVDC or similar., • Experience of design and system integration working on complex multi-disciplinary projects., • Controls & Protection of HV & LV system., • Experience of owning the job, making it their own, and adding value beyond., • Capable of leading large multi-disciplinary teams., • Ability to multi-task on a variety of tasks to strict time scales., • Significant analytical, interpersonal, communication, presentation and facilitation skills., • Customer-centric mind set, experience in translating customer issues / needs into profitable business solutions., • Min Degree in Electrical / Electronic Engineering or Project Management & equivalent degree with suitable industry experience., • Significant and demonstrated years of experience in Control & Protection system and have advanced problem-solving skills., • A great sense of urgency and ability to identify and manage team organisational risks., • Proven skills in managing and leading team with strong technical background, • Excellent written and verbal communication skills., • Able to work to deadlines under pressure whilst maintaining the safety, quality, and engineering integrity of the solution., • Must be flexible with working hours and willing to travel globally., • Extensive oral and written communication skills., • Advanced interpersonal and leadership skills, experienced in creating and presenting to other stake holders., • Demonstrated ability to analyse and resolve problems., • Demonstrated ability to lead programs / projects., • Ability to document, plan, and execute programs., • Established project management skills., • Proven technical leadership in a complex functional engineering development environment., • Experienced in technical leadership and Project management, people leader., • Ability to mentor & coach project engineers GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition – and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GEV, our engineers are always up for the challenge - and we’re always driven to find the best solution. Our projects are unique and interesting, and you’ll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you’ll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Relocation Assistance Provided: No #J-18808-Ljbffr

Become part of a winning team and help to deliver the Green Energy transition. Become part of a winning team and help to deliver the Green Energy transition. • Design and troubleshoot complex analogue, digital, and mixed-signal electronics issues at board and system level, including Ethernet technologies., • Redesign up to Core CPU level with High-Speed Memory constraints, using complex FPGA and CPLD Architecture., • Provide design support for Control and Protection hardware designs across development, manufacturing, and deployed systems., • Review and support schematics, PCB layouts, and design documentation., • Collaborate closely with firmware, systems, safety, and verification teams during design, and test development teams during outsource activities., • Support R&D activities including prototype bring-up, validation, and verification testing., • Contribute to design-for-manufacture (DFM), design-for-test (DFT), reliability, and serviceability improvements., • Support engineering change management, component selection, and obsolescence mitigation., • Assist with transition from development into manufacturing and volume production., • Provide technical support to manufacturing sites and contract manufacturers., • Support production test development and resolution of yield or test failures., • Interface with suppliers on component quality, technical issues, using structured root cause analysis (RCA) to drive corrective and preventive actions (CAPA)., • Demonstrate technical leadership within GE Vernova's global R&D and engineering structure., • Act as a key technical interface between UK engineering, global R&D teams, and manufacturing., • Contribute to continuous improvement of engineering processes and knowledge sharing., • Formal Qualification in Electronics Discipline; Degree Level preferred however HNC / HND level with proven industry involvement accepted., • Advanced design background in analogue and digital electronics, including mixed-signal designs., • Experience with embedded hardware systems in industrial or energy-related applications., • Proven hands-on troubleshooting skills using standard lab equipment (oscilloscope, logic analyser, DMM, etc.)., • Ability to interpret schematics, PCB layouts, and technical reports., • Understanding of hardware reliability, failure analysis, and lifecycle support., • Knowledge of EMC testing and CAD packages (Altium - highly desirable), • PCB Layout Design, • Advanced FPGA experience, • Experience supporting hardware across R&D, NPI, and manufacturing., • Exposure to manufacturing support, production test, and supplier engagement., • Experience working in global matrixed engineering organizations., • Some technical leadership or team coordination experience preferred., • Structured problem-solving mindset., • Clear and effective technical communication., • Ability to manage multiple technical issues and small projects in parallel., • Comfortable working in regulated, safety-critical, or high-reliability environments., • Design Experience with energy, power electronics, grid, or industrial control systems., • Knowledge of relevant standards (e.g. safety, EMC, environmental)., • Prior experience in sustaining engineering, field support, or reliability engineering roles. GE Vernova is a world leader in the energy solutions market with a portfolio of energy businesses across the globe. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition - and we want you to be part of that change and enjoy imagination at work. If you are ready to make a difference and usher in a new era of clean, reliable energy, come join us. At GEV Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. At GEV, our engineers are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Relocation Assistance Provided: No #J-18808-Ljbffr

Are you a recently graduated Occupational Therapist looking to embark on a rewarding career, where you are supported in everything you do? If so, join Adderley Green Neurological Centre and give your career the best start. This is a 9-month fixed-term maternity cover position. Working alongside a dedicated team you will be working at a service that provides care for people with people with neurol... JBRN1_UKTJ

Are you an experienced Speech and Language Therapist looking for a role where your expertise truly makes a difference? Join Adderley Green as a Senior Speech and Language Therapist to manage a complex caseload of residents and deliver high-quality, person-centred assessment and intervention within a

My Four Wheels is a 5-star rated driving school with 500 instructors teaching nationwide - and due to record learner demand, we're now recruiting new Trainee Driving Instructors across the UK.If you're looking for a career change with great earning potential, flexible working, and genuine job satisf

Job Description Summary Become part of a winning team and help to deliver the Green Energy transition. As a Lead Commissioning Specialist, you will be technically responsible for the preparation of commissioning specification and execution of the energised testing at site. As a senior member of the test team, you will lead the system test engineers & review site test results. Job Description Main duties and responsibilities will include. Lead the execution of HVDC System Tests on-site in line with the requirements of the specification. Prepare/contributing to the generation of commissioning test procedure in coordination with System Engineering / Project Validation & verification Lead and reference to contractual requirements and international standards. Responsible for the preparation / revision of additional testing procedures when required. Performing tests of commissioning test procedure on Real Time Digital Simulators prior to commissioning at Site. Prepare / contributing to the test programs and anticipate test durations for preparation of test programs. Updating and reviewing the test schedule on a daily and weekly basis with customer to be managed by customer alongside the Site Commissioning Manager. Preparation of power schedules and daily and weekly power profiles. Ensuring that the tests are conducted in accordance with the test procedure agreed and documented. Responsibility for working with customer for coordination of HV switching and power control. Reviewing the station/converter behaviour (interaction with the AC network) to ensure that the performance is satisfactory, and that any unpredicted behaviour is documented and evaluated before tests proceed. Ensuring that the test results are captured and logged correctly and that the test reports are kept up to date. Issuing a daily report to various stakeholders at the end of each day of testing. This is joint activity with Site Commissioning Manager. Gathering a return of experience throughout the execution of the testing of each project, to provide a conclusive report on the return of experience at the end of the project. Reporting on regular basis (daily and weekly) to the Commissioning Team Manager & Project Manager the progress of system tests. Highlighting potential and observed additional costs to avoid overspend and permit potential claims for changes to be realised. Reviewing the test schedule performance versus the initial target overall testing program schedule. Responsible for control and follow-up, in collaboration with the site manager of: Testing and measuring equipment (status, validity of calibration certificates). Safety equipment related to electrical activities. Explain Safety moment and test plan to all the stake holder at the beginning of the day. Qualifications / Essential Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business. Successfully completed vocational training with demonstrated years of proven experience in the position of Commissioning Engineer in High Voltage field, preferably experience as a Site Commissioning Manager. Good knowledge of overall 400kV substation, HVDC system (LCC/VSC/SVC) including control and protection system is essential. Knowledge of Overall HVDC System Operational behaviour and impact on equipment to make decisions when leading system testing at site is essential. Excellent communication skills with a fluency in English language. Knowledge of Microsoft Office Word and Excel is required, and Microsoft project would be beneficial. Knowledge of Fault Recorder (TFR) systems is essential. Understanding of substation control and protection systems and HV equipment operation is beneficial. Experienced working alongside GE would be advantageous although non-critical. Must be able and willing to work both in Office and on sites worldwide for extended periods (around 60% of the time). Grid Solutions, a GE Vernova business, serves customers globally with over 20,000 employees. We provide power utilities and industries worldwide with equipment, systems and services to bring power reliably and efficiently from the point of generation to end power consumers. Grid Solutions is focused on addressing the challenges of the energy transition by enabling the safe and reliable connection of renewable and distributed energy resources to the grid. We electrify the world with advanced grid technologies and accelerate the energy transition. About GE Grid Solutions: At GE Grid Solutions we are electrifying the world with advanced grid technologies. As leaders in the energy space our goal is to accelerate the transition for a more energy efficient grid to full fill the needs of tomorrow. With a focus on growth and sustainability GE Grid Solutions plays a pivotable role in integrating Renewables onto the grid to drive to carbon neutral. In Grid Solutions we help enable the transition for a greener more reliable Grid. GE Grid Solutions has the most advanced and comprehensive product and solutions portfolio within the energy sector. Why we come to work: At GE Renewable Energy, our engineers are always up for the challenge - and were always driven to find the best solution. Our projects are unique and interesting, and youll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, youll be exposed to game-changing, diverse projects that truly allow you to play your part in the energy transition. What we offer: A key role in a dynamic, international working environment with a large degree of flexibility of work agreements Competitive benefits, and great development opportunities - including private health insurance. Additional Information Relocation Assistance Provided: No TPBN1_UKTJ

Berry Recruitment are currently recruiting for Loaders to work with our client based in Stafford, Staffordshire. The roles are temporary ongoing that could lead to permanent for the right candidates. Duties will include:- Collecting general waste, recycling and green bins from domestic properties in the South Staffordshire area. To collect waste/refuse containers and return to designated area. Report any missing bins. To assist driver with any reversing of the vehicle. Clear up any spillages. Loading bins onto collection vehicles. Adhering to all health and safety procedures. Working to agreed standards and targets. Working in a small team. To remain polite, courtesy and polite to colleagues and members of the public.Due to the nature of the role, you must be able to work in adverse weather conditions. Monday to Friday, 6.30am start until finish, approx 3pm/4pm. Overtime on a Saturday when required. £12.71 to £13.76 per hour. Benefits:- Weekly Pay Online payslips On site car parkFor further details, please call Berry Recruitment, Midlands. We are committed to fair and inclusive recruitment. All applicants will be considered on the basis of their skills, experience, qualifications and ability to perform the role, and no applicant will be treated less favourably because of a protected characteristic under the Equality Act 2010