Trabajos instrumentation and control engineering en LiverpoolCrear alertas

This position is responsible for providing technical leadership within the process engineering department for equipment and process design for Seqirus Liverpool’s products ensuring the engineering solutions meet cost, reliability, schedule, and performance integrity requirements. Additionally, this position is responsible for the planning and execution of all process engineering activities from preliminary design to routine manufacturing, coordinated with the project management team, including in-house/plant technical support Responsibilities To act as Lead Process Engineering SME for support of team members in the identification, investigation and provision of compliant solutions and innovations involving: • Process Design, • Design Qualification, Design Review and HAZOP studies, • Lead Process Safety initiatives across supported areas and wider site, championing improvements and knowledge sharing, • Process, equipment & component specification (plant, instrumentation, automation & consumables/disposables), • Change control management, • Input into budget development and securing of Opex & Capex funding, • Automation approach including the Sequence of Operations and FDS definition, • Commissioning, validation and handover (FAT, SAT, FT/Commissioning, IQ, OQ, PQ, CV, CSV) Lead, as a subject matter expert: • Working with the cross-function team, consolidate and refine requirements for process equipment and facilities., • Responsible for preparing technical specifications throughout the procurement process to ensure that the user requirements are met. Negotiates cost delivery and technical/design feasibility with external suppliers., • Responsible for managing delivery, issues and risks arising during the procurement, design, and construction phases of process equipment and facilities., • Collaborate with project manager(s) to determine cost, platform and resource requirements in order to deliver projects on time and within budget., • Participate in resolution of issues such as conflicting design requirements, unsuitability of standard material and difficult coordination requirements., • Coordinate project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion., • Assign tasks to process engineering staff and supervise progress to ensure objectives are being met. Monitor resource loading and prioritise activities to maximise the overall business contribution of the department, using agreed tools and metrics as required. Ensure that customer expectations are met for business KPIs and work priorities including: • savings targets, • on time closure of deviations, CAPAs, change controls, MRFs and regulatory commitments, • project selection & portfolio management To advocate, encourage and enthusiastically adopt a culture of participation, knowledge sharing, involvement, and focus on anticipating and preventing potential problems. Maintain an external focus to ensure industry best practices are incorporated into Liverpool Operations and site technical standards. Uphold and contribute to the development of site engineering standards to comply with regulatory and pharmaceutical industry requirements. Ensure that appropriate standards of GMP, housekeeping, safety and discipline are maintained at all times both within the department and operational areas. Participate in professional organizations to maintain current knowledge of technical innovations. Education Requirements A recognised degree in Chemical/Process Engineering is expected. The candidate will ideally be a Chartered Engineer and fully conversant with application routes and requirements. Experience Requirements 7+ years’ experience, preferably within Biotech/pharmaceutical Manufacturing environments with a specific background in cGMP. CSL Seqirus is part of CSL. As one of the largest influenza vaccine providers in the world, CSL Seqirus is a major contributor to the prevention of influenza globally and a transcontinental partner in pandemic preparedness. With state-of-the-art production facilities in the U.S., the U.K. and Australia, CSL Seqirus utilizes egg, cell and adjuvant technologies to offer a broad portfolio of differentiated influenza vaccines in more than 20 countries around the world. To learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor visit ___ and CSL Plasma at ___. Our Benefits For more information on CSL benefits visit ___. You Belong at CSL At CSL, Inclusion and Belonging is at the core of our mission and who we are. It fuels our innovation day in and day out. By celebrating our differences and creating a culture of curiosity and empathy, we are able to better understand and connect with our patients and donors, foster strong relationships with our stakeholders, and sustain a diverse workforce that will move our company and industry into the future. To learn more about inclusion and belonging visit Equal Opportunity Employer CSL is an Equal Opportunity Employer. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, please visit ___. Watch our ‘On the Front Line’ video to learn more about CSL Seqirus

About Hydrokem Aerosols Ltd: Hydrokem Aerosols are located on the Wirral and specialise in the manufacture of aerosol and bag on valve products. We supply to a wide range of market sectors including personal care, healthcare/medical devices, veterinary, household, automotive and technical. Hydrokem Aerosols is a part of Clinimed Holding Limited, a group of companies founded in 1982 following the acquisition and formation of number of additional companies within the group. Job Summary: As a Project Engineer, you will play a crucial role in overseeing and managing various engineering projects. Reporting to the Site Project Manager, you will work closely and collaboratively with cross functional teams. You will scope, plan, implement and successfully complete engineering projects within budget of varying scale, complexities, and technologies on time in full. You will be responsible for the management and implementation of key projects in the packing and process area. Benefits: • Contributory Pension Scheme (5% Employer Contribution, Increasing up to 10% with Service), • Medical Cash Back Plan (Simply Health), • Life Assurance (4 x Annual Gross), • Annual Performance Bonus, • Annual Pay Review, • Onsite Free Car Parking, • Cycle to Work Scheme., • Employee Referral Scheme, • Employee Assistance Programme – Health & Wellbeing, • Training & Development Opportunities, • 25 Annual Holidays plus Bank Holidays and One Company Holiday (and Christmas Shutdown) Main Duties & Responsibilities: • To collaborate with team members to define project goals and objectives., • Develop project plans and schedules, ensuring adherence to the deadline. Oversee project execution, monitoring progress and adjusting as needed., • Ensure compliance to design criteria and standards, creating and reviewing designs and taking responsibility to document necessary processes., • Conduct feasibility studies, producing user requirement specifications, layout drawings, throughput calculations, cost estimates as well as developing engineering criteria., • Preparing tender evaluation documentation and capex proposals that provide good return on investment., • Conduct regular project meetings to communicate updates and address any issues., • Coordinate all project related activities between internal team and external vendors., • Effectively manage and foster good working relationships with Contractors and other third parties., • Manage project budgets including tracking expenditure and reviewing invoices to ensure on time in full delivery to budget., • Conduct risk assessments and implement strategies to mitigate potential risks., • Ensure compliance with current safety regulations and quality standards. Raising management of change procedures, URS and change controls when appropriate., • Prepare and present project reports to stakeholders highlighting key milestones and achievements., • Ensure stakeholder satisfaction through clear, professional communication, • Work closely with Safety, Operations, Quality and Technical teams to identify strategic opportunities to develop lean capabilities, maximise yields and reduce production costs through continuous improvement projects. Personal Specifications: • At least 5 years of experience in project engineering ideally in aerosol industry., • Solid understanding of Health and Safety compliance, Hazard Study Methodology, Risk Assessment, Permit to Work systems and CDM2015., • Good knowledge of mechanical and electrical engineering, instrumentation, and automation., • Proven ability to manage multiple projects in a manufacturing environment., • Hands-on operational experience, ideally within a multidisciplined FMCG environment., • Proven experience in project management tools and techniques, PMP or Prince 2 methodologies: experience with AutoCAD, able to interpret and design PFD’s, P&ID’s, Layout Drawings, MS office packages., • Knowledge of relevant industry codes and standards., • HNC or NVQ Level 3 in engineering or equivalent qualification., • Good organizational and planning skills with an ability to prioritise competing demands and manage own workload., • Able to manage multiple engineering projects concurrently with in-depth technical contribution., • Sound knowledge of 5S and TPM/WCM methodologies., • An excellent articulate communicator, with strong interpersonal skills., • Proven previous experience in stock control or inventory management., • Strong attention to detail with a high level of accuracy., • Ability to manage multiple tasks and meet deadlines., • Confident communicator, able to work effectively with internal teams and customers.

Job Role: Senior - Principal Electrical Engineer\n\nSalary / Rate: £(phone number removed) + Package depending on level of experience.\n\nLocation: Multiple office locations considered\n\nOur client is a respected consultancy who are looking to grow their established Water team with Electrical Engineers from Senior to Principal grade. The successful candidate will be delivering outline design and detailed specifications primarily for water and wastewater schemes for AMP8 - frameworks secured including Southern Water, Thames Water, Wessex Water and South West Water.\n\nAbout the Role:\n\nAs an Electrical Engineer you'll work closely with multi-disciplinary teams from across the wider Water Business to deliver projects by:\n\nUndertaking outline and detailed designs and specifications for electrical, instrumentation and control works.\nProviding day to day technical input as part of a team of engineers and technicians.\nEnsuring design output is completed in accordance with the agreed scope of works, timescales and budgets.\nWorking in close collaboration with colleagues from other disciplines as required to deliver project requirements and added value to the Client.About you:\n\nA degree in Electrical Engineering (or equivalent) and chartered or be working towards achieving chartered status with a relevant professional institution.\nKnowledge and experience of electrical, instrumentation and control design for the water industry.\nThe ability to work with engineers from all disciplines and other industry professionals to optimise and develop bespoke and innovative designs.\nExperience in the delivery of water designs and specifications on water related projects for Water Companies and Design & Build Contractors. \n\nIf you would like to learn more about this opportunity, please reach out to Charlie Knight @ Advance TRS.\n\nWe are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

Lead EC&I Engineer\n\nCar allowance\nPrivate healthcare (Bupa or equivalent)\nLife assurance (4x salary)\nSalary sacrifice pension scheme\n25 days annual leave + bank holidays\nOngoing training & professional development\nOpportunity to work on innovative, low-carbon energy projects\nStrong long-term career progression within a growing businessAn ambitious and fast-growing energy solutions business is looking to appoint a Lead EC&I Engineer to support the delivery of complex industrial energy projects across the UK.\n The organisation works with energy-intensive industrial clients to reduce energy costs and carbon emissions through the design, build, and operation of on-site energy systems. Projects typically integrate technologies such as CHP, heat recovery, heat pumps, and solar PV within live manufacturing environments.\n This is a hands-on, technically varied role offering involvement across the full project lifecycle—from early-stage design through to commissioning and operational optimisation.\n\nAs Lead EC&I Engineer, you will play a key role in ensuring control systems and instrumentation are designed, implemented, and commissioned to the highest standards.\n You’ll work closely with internal teams and external engineering partners, reviewing designs, shaping control philosophies, and supporting on-site delivery to ensure systems operate safely, reliably, and efficiently.\n This role suits a practical, solutions-focused engineer who enjoys both technical design and site-based problem-solving.\n Key Responsibilities \n\nContribute to EC&I specifications, control philosophies, and Functional Design Specifications (FDS)\nReview third-party electrical, control, and instrumentation designs, providing technical challenge where needed\nSupport development of technical scopes and tender documentation\nAdvise on instrumentation, control strategies, and data capture requirements\nTranslate operational needs into clear and effective control strategies\nHelp standardise EC&I approaches across projects\nProvide technical input during commissioning and early operation phases\nSupport system testing, troubleshooting, and validation of control logic\nAttend site during installation and commissioning to ensure correct implementationWhat We’re Looking For Essential:\n\nBackground in Electrical, Control Systems, or Instrumentation Engineering\nExperience with industrial control systems, automation, or instrumentation\nExperience reviewing or assessing third-party engineering designs\nStrong understanding of control philosophies and Functional Design Specifications (FDS)\nCommissioning, troubleshooting, or system validation experience\nComfortable working across both office and site environments\nStrong communication and stakeholder engagement skills\nFull UK driving licence and willingness to travelThis is a unique opportunity to join a forward-thinking organisation at the forefront of industrial decarbonisation. You’ll work on technically challenging, meaningful projects that deliver real-world impact, while developing your expertise across a broad range of energy technologies

As a Field Service Engineer, your primary responsibility will be to lead specialty field testing projects and campaigns for High Voltage & assets in electricity generation plants, utility, and industrial substations. You will undergo comprehensive training to develop the necessary skills for this role. Your main role will involve performing electrical field testing services, which includes conducting ground grid testing, advanced underground distribution and high voltage class cables testing, switchgear and transformer testing. While you will be based in the German / Danish / UK office, it is important to note that a significant portion of your time, approximately 50- 70%, will be spent traveling to client sites across the EU. The specific travel assignments will be determined by the company. Therefore, you must be open to flexible scheduling and have the ability to travel on short notice. In summary, as a Field Service Engineer, you will play a crucial role in leading field testing projects, to help ensure the reliability and performance of High Voltage for our clients. Your expertise in electrical field testing and power system studies will contribute to the success of electricity generation plants, utility, and industrial stations. General Duties • Following an initial training period and evaluation of your progress in the role, your responsibilities will grow as you begin to lead projects, schedule resources and equipment, and safely perform the advanced electrical tests at various facilities including public utilities, nuclear generation plants, renewable plants (wind, solar farms) and industrial applications., • You will perform ground grid testing (current injection testing), soil resistivity measurements, current split testing, step and touch measurements, power system studies, diagnostics on underground power cables., • Following the field testing, you will compile and analyse results and prepare comprehensive technical engineering reports for presentation to customers., • You will directly interact with power distribution customers and contractors on site, operate advanced diagnostics equipment, acquire test data, and communicate with the remote support team., • You will be responsible for management of company assets in field including power supplies, instrumentation, tools, inventory parts, etc., • You will be relied on to provide onsite customer training on safety issues, test processes and quality control topics. Additional Requirements. • Availability for travel to assignments in EU without sponsorship must hold EU passport, • Travel 50%-70% in EU countries, • Speak German or Danish will be an advantage

Commissioning Engineer - Remote (UK-Based) - Global Travel Required Are you an experienced Commissioning Engineer ready to take on a global challenge? We are looking for a motivated and technically skilled individual to join our dynamic team, delivering world-class process engineering projects across EMEA, APAC, and beyond primarily in the food & beverage industry. What You’ll Do: Depending on project needs, you may be deployed as a Process Commissioning Engineer, Commissioning Team Leader: • Lead Installation and Operational Qualification (IQ/OQ) activities on client sites worldwide, • Commission and start up process plants, including utilities, MCC panels, instrumentation, and control systems, • Troubleshoot mechanical, hydraulic, thermal, and electrical issues on-site, • Manage and coordinate commissioning teams and contractors across complex, multi-disciplinary projects, • Deliver customer training and support first production runs, • Produce detailed commissioning reports and weekly project updates, • Ensure strict compliance with health, safety, and contractual requirements on every site What We’re Looking For • Degree-level qualification in Engineering, Food Technology, or Dairy Technology (or equivalent), • Minimum 4 years’ experience in Process Engineering or Commissioning roles, • Strong technical skills across mechanical, electrical, and instrumentation disciplines, • Excellent communication skills in English (spoken and written), • Confident working autonomously on international sites and managing stakeholder relationships, • Full willingness to travel globally — role requires approximately 80% travel Working Pattern: Remote-based in the UK with approximately 80% global travel. You’ll work across EMEA and APAC regions, spending extended periods on client sites as projects demand.

Field Commissioning Engineer – Process Equipment 💰 Up to £60,000 | UK Field Based We are working with a specialist engineering company that designs, builds and installs bespoke process equipment for customers across a range of regulated and industrial sectors. Due to continued growth, they are looking for a Field Commissioning Engineer to support the final stage of project delivery, commissioning equipment at client sites across the UK. This role would suit someone who enjoys hands-on commissioning, problem solving and working on customer sites. The Role • Commissioning newly installed process equipment and systems, • Working with PLC-controlled machinery and instrumentation, • Carrying out Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), • Fault finding and troubleshooting during commissioning, • Supporting installation teams during project completion, • Producing commissioning reports and technical documentation, • Liaising with customers during final project handover What We're Looking For • Experience commissioning process equipment or automated machinery, • Knowledge of PLC control systems, • FAT / SAT testing experience, • Strong troubleshooting skills, • Willingness to travel to client sites across the UK 💰 Salary up to £60,000

Lead the Future of Water Infrastructure – Drive Innovation, Delivery & Excellence as a MEICA Lead! MEICA Lead – Senior Water Industry Roles Locations: Milton Keynes Or Warrington / Preston Salary: Very Competitive + Car Allowance + Excellent Benefits Full-Time | Hybrid Working Available About the Role We are recruiting for two full-time, senior positions to drive delivery across major water industry projects. These roles are ideal for experienced MEICA Leads or M&E Managers / Leads looking to step into a strategic, senior position. You will be responsible for defining and delivering MEICA (Mechanical, Electrical, Instrumentation, Control & Automation) strategy and performance across multiple projects. You will play a critical role in ensuring successful project delivery across the full lifecycle – from pre-construction and procurement through to commissioning and handover – while driving safety, quality, and operational excellence. Key Responsibilities • Define and implement MEICA delivery strategy across water projects, • Lead procurement strategies and manage subcontractor arrangements, • Report on performance, risks, and key issues to senior management, • Drive a strong HSEQ culture across multiple project sites, • Ensure consistent implementation of safety and quality procedures, • Oversee programme delivery and contribute to constructability reviews, • Plan and manage MEICA resources across all project stages, • Maintain robust technical governance throughout delivery and handover, • Collaborate with design, commercial, and civil engineering teams, • Capture lessons learned and drive continuous improvement, • Build and maintain strong client relationships About You • Degree or equivalent in Engineering (BEng / HNC / HND), • Proven experience delivering major water industry or infrastructure projects, • Strong knowledge of water industry standards and supply chain, • Demonstrated experience managing multidisciplinary teams, • CSCS card, • SMSTS or IOSH (4-day) certification We are open to applications from both MEICA Leads and experienced M&E Managers / Leads. What’s on Offer • Very competitive salary, • Car allowance, • Full-time, senior leadership role with hybrid working flexibility, • Opportunity to lead high-profile water projects, • Career progression within a leading engineering organisation, • Collaborative, forward-thinking working environment Locations We are hiring for two positions: • Milton Keynes, • Warrington or Preston If you are a senior MEICA professional or M&E Manager / Lead looking to take the next step in the water industry, we’d love to hear from you.

ElectricalEngineer We currently have a fantastic opportunity for anElectricalEngineer to work for a leading engineering manufacturer in Southampton. Introduction Theprimary duties of this role will be todesign, develop, and lifecycle support of the sites electrical and instrumentation systems. Acting asthe technical authority for all electrical and control elements across new product development. Key Responsibilities • Lead electrical and instrumentation design for product systems, including sensor interfaces, signal conditioning, PLC/embedded control, and system integration., • Produce schematics, wiring diagrams, panel layouts, and documentation using tools such as AutoCAD, EPLAN, or SkyCAD., • Specify materials, components, and instrumentation appropriate for harsh and safety-critical environments., • Support sales and applications engineering by contributing to system concepts, technical proposals, and layout drawings., • Conduct factory acceptance testing (FAT), customer witness tests, and on-site commissioning., • Deliver accurate as-built documentation, commissioning reports, and change records. The ideal candidate will have a good working knowledge of PLC systems an programming and the capability to be responsible for all electrical items across the site Salary: Up to £50K Hours: Days Monday to Friday Benefits: • Pension scheme, • Company bonus scheme, • Opportunity to travel If you could be interested in this excellent Electrical Engineer opportunity, please apply and we'll be in touch to discuss further. JBRP1_UKTJ

This position is responsible for providing technical leadership within the process engineering department for equipment and process design for Seqirus Liverpools products ensuring the engineering solutions meet cost, reliability, schedule, and performance integrity requirements. Additionally, this position is responsible for the planning and execution of all process engineering activities from preliminary design to routine manufacturing, coordinated with the project management team, including in-house/plant technical support Interested in this role You can find all the relevant information in the description below. Responsibilities To act as Lead Process Engineering SME for support of team members in the identification, investigation and provision of compliant solutions and innovations involving: • Process Design, • Design Qualification, Design Review and HAZOP studies, • Lead Process Safety initiatives across supported areas and wider site, championing improvements and knowledge sharing, • Process, equipment & component specification (plant, instrumentation, automation & consumables/disposables), • Change control management, • Input into budget development and securing of Opex & Capex funding, • Automation approach including the Sequence of Operations and FDS definition, • Working with the cross-function team, consolidate and refine requirements for process equipment and facilities., • Responsible for preparing technical specifications throughout the procurement process to ensure that the user requirements are met. Negotiates cost delivery and technical/design feasibility with external suppliers., • Responsible for managing delivery, issues and risks arising during the procurement, design, and construction phases of process equipment and facilities., • Collaborate with project manager(s) to determine cost, platform and resource requirements in order to deliver projects on time and within budget., • Participate in resolution of issues such as conflicting design requirements, unsuitability of standard material and difficult coordination requirements., • Coordinate project activities with other operating or engineering units to facilitate participation of appropriate staff in project completion., • savings targets, • on time closure of deviations, CAPAs, change controls, MRFs and regulatory commitments Education Requirements A recognised degree in Chemical/Process Engineering is expected. The candidate will ideally be a Chartered Engineer and fully conversant with application routes and requirements. Experience Requirements 7+ years experience, preferably within Biotech/pharmaceutical Manufacturing environments with a specific background in cGMP. About CSL Seqirus CSL Seqirus is part ofCSL. As one of the largest influenza vaccine providers in the world, CSL Seqirusis a major contributor to the prevention of influenza globally and a transcontinental partner in pandemic preparedness. With state-of-the-art production facilities in the U.S., the U.K. and Australia, CSL Seqirus utilizes egg, cell and adjuvant technologies to offer a broad portfolio of differentiated influenza vaccines in more than 20 countries around the world. To learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor visit and CSL Plasma at Benefits For more information on CSL benefits visit How CSL Supports Your Well-being | CSL. You Belong at CSL At CSL, Inclusion and Belonging is at the core of our mission and who we are. It fuels our innovation day in and day out. By celebrating our differences and creating a culture of curiosity and empathy, we are able to better understand and connect with our patients and donors, foster strong relationships with our stakeholders, and sustain a diverse workforce that will move our company and industry into the future. xrnqpay To learn more about inclusion and belonging visit Opportunity Employer CSL is an Equal Opportunity Employer. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, please visit our On the Front Line video to learn more about CSL Seqirus

Synopsis: Our client is seeking a Commissioning / Installation Engineer from an industrial equipment background. £K Excellent Negotiable Salary + Quarterly Bonus, Car Scheme, Excellent Pension, etc. Flexible Central England Location, East /West Midlands, Greater Manchester, Bristol Area Job Title: Commissioning / Installation Engineer - Industrial Vacuum Equipment Package:£K Excellent Negotiable Salary + Quarterly Bonus, Company Vehicle, pension etc. Area / location:Flexible Central England Home Base (Near an Airport) with UK Remit Brief job description: Our Client, a Global Leader in the supply, installation and support of Industrial Vacuum furnaces, are expanding their UK based Service Team. They are currently looking for Commissioning / Service Engineers ideally located in Central England. The position requires travel throughout the UK, Europe.The successful candidate would be mainly based in the UK and should be expecting to be away from home Monday to Friday if the site is not within travelling distance of their home. There is also the possibility of periods of overseas work where the engineer would be expected to be away for up to 4-5 weeks, anytime above this would be agreed between the engineer and their manager beforehand. A team of engineers share the overseas work and would not be left to one engineer.This role is ideally suited to a person with electro/mechanical maintenance background wanting to get into the service / installation industry. The role will primarily be to supervise installation contractors while the equipment is being installed and then take the equipment through the site acceptance tests however there will be service work required as well from time to time.The successful applicant will have the following technical capabilities: Electrical and /or Mechanical qualification C&G or equivalent. Understand electrical schematics Understand mechanical drawing. Fault finding and regular maintenance functions of mechanical assemblies, drives, pumps etc. Familiarity with pneumatic, water, hydraulic & electrical systems and their functions. Working knowledge of temperature control instrumentation, invertors PLCs and HMIs Experience with Allen Bradley & Siemens PLC programmes. Experience with other types will be considered. Experience with fault finding PLC programs. Familiarity with Microsoft Office programmes.Additional skills / qualifications that would be advantageous but not essential as product training will be given. Knowledge of vacuum technology would be an advantage. BS7671 18th Edition Qualification. C&G 2391-52 Initial and periodic inspection and testing. Ability to modify PLC programs to instructions given by the engineering department. JBRP1_UKTJ

Job Specification: Maintenance Engineer Location: Clitheroe, Lancashire Salary: Circa £45,000 - £50,000 depending on experience Company Overview Bryden Precision Engineering is a CNC machining business supplying complex, high-precision components into the aerospace, defence, nuclear, utilities,powerand other safety-critical sectors. We are proud holders of AS9100 accreditation and are now preparing for ISO 19443 (nuclear) accreditation as we continue to grow. Role Overview We are seeking a skilled Maintenance Engineer to join our engineering team. The role involves completing a full range of maintenance activities across the installed asset base, rapidlydiagnosingand resolving mechanical, electrical, and basic control & instrumentation faults. The successful candidate will play a key role in minimising downtime,maintainingequipment reliability, and supporting the launch and commissioning of new or refurbished machinery. Key Areas of Responsibility: * Day-to-day upkeep, maintenance, and servicing of production equipment * Rapid response to breakdowns to minimise downtime * Supporting implementation, commissioning, and launch of new or refurbished equipment * Diagnosing equipment faults and executing repairs in mechanical, electrical, hydraulic, pneumatic, and control systems * Programming fault finding, modifications, and troubleshooting via PLCs * Carrying out planned preventative maintenance (PPM) tasks and ensuring schedules are adhered to * Reading and interpreting electrical, mechanical, hydraulic, and pneumatic drawings * Implementing quality countermeasures and ensuring equipmentoperatesto specification * Participating in problem-solving and continuous improvement initiatives * Supporting 5S andmaintainingan organised, safe, and efficient work environment * Any other duties of a similar nature or level of responsibility Required Qualifications & Experience * Minimum Level 3 in Electrical and Electronic Engineering * Understanding of engineering principles and technical drawings * Ability to read and interpret electrical, mechanical, hydraulic, and pneumatic schematics * Strong practical skills with experiencemaintainingproduction equipment * Good problem-solving and diagnostic skills * Ability to work efficiently under pressure and manage multiple tasks * Strong communicationand teamwork skills * Good numeracy and analytical skills * BTEC HNC Electrical or equivalent * Experience with PLC programming and fault diagnosis * Previousexperience in a precision engineering or CNC manufacturing environment * Knowledge of quality systems (AS9100) and safety-critical processes Personal Attributes * Highly organised and self-motivated * Proactive and flexible approach to work * Strong attention to detail and quality-focused * Ability to work effectively in a team and independently * Committed to continuous development and learning Bryden Precision Engineering is committed to developing the technical skills of its employees, supporting career growth, andmaintainingthe highest standards of quality and safety across all sectors. To apply for this role please send a fully updated CV to our Recruitment Manager Carolann JBRP1_UKTJ

Reliability Specialist Location: Capenhurst Department: UCP Operations Reports to: UCP Plant Reliability Manager Rates: £45-50 per hour, umbrella Summary The UCP Reliability Specialist plays a vital role in supporting the Plant Reliability Manager to deliver the plant reliability programme. This position is responsible for driving the reliability improvement strategy and advising operational teams on reliability matters. The role involves implementing global and site-specific reliability standards on plant, monitoring asset performance, and leading continuous improvement initiatives to enhance Overall Equipment Effectiveness (OEE). The specialist will work closely with operations, maintenance, and engineering teams to identify and resolve asset performance issues, lead multi-functional reliability improvement teams, and influence capital investment priorities. A key focus is fostering a strong reliability culture through the consistent application of reliability tools and coaching to improve data quality and operational practices. Key Responsibilities • Analyse plant performance to ensure systems meet design intent and business needs, driving OEE towards world-class levels., • Promote and embed a reliability culture across the organisation from design through to maintenance., • Support and chair reliability steering committees, driving coordinated action plans to improve plant throughput and performance., • Provide reliability assessment support for new equipment procurement, including FMEA-based maintenance and spares recommendations., • Collaborate with operations, maintenance, and engineering teams to diagnose and resolve asset degradation and identify improvement opportunities., • Manage change for obsolete equipment and ensure critical spares provision., • Lead reliability improvement teams to reduce operational losses and improve asset reliability., • Work autonomously while escalating issues appropriately and contribute to the development of global reliability standards. Required Skills, • Degree in a relevant engineering discipline (preferably Mechanical or Control & Instrumentation)., • Chartered membership of an appropriate Engineering Institute., • Minimum 6 years' experience in engineering within a highly regulated industry (e.g. Oil, Gas, Nuclear, Chemicals)., • Proven experience in reliability analysis and continuous improvement techniques such as RCM, RCA, and FMEA., • Strong understanding of plant equipment, systems, and processes., • Excellent communication, negotiation, and influencing skills., • Ability to lead and motivate cross-functional teams., • Strong problem-solving skills and a proactive approach to driving results., • Competent in coaching and facilitating cultural change., • Ability to work collaboratively and decisively in a complex environment. Software/Tools, • SAP, • Asset Operations systems, • MS Office (Excel, Word, PowerPoint), • Criticality and FMEA analysis software Certifications & Standards, • Chartered Engineer status or equivalent professional accreditation, • Familiarity with industry standards related to reliability and asset management, • Knowledge of regulatory compliance requirements relevant to plant operations Reliability Specialist JBRP1_UKTJ

A leading chemical manufacturer is seeking an EC&I Technician to join their Manchester site on a permanent basis. This role offers a competitive salary starting at £42,000 per annum along with an attractive benefits package including a double-figure employer pension contribution, free on-site parking, company part-subsidised private healthcare, and excellent holiday allowance. As an EC&I Technician, you will be responsible for the maintenance, fault finding, and repair of electrical, control, and instrumentation systems across a high-hazard COMAH chemical manufacturing facility. You will play a key role in ensuring the safe, reliable, and compliant operation of plant equipment through planned preventive maintenance, breakdown response, and support to ongoing improvement activities. Key Responsibilities: • Carry out planned, corrective, and breakdown maintenance on electrical systems across the site., • Work in full compliance with site permit-to-work systems., • Diagnose faults and troubleshoot issues across electrical and instrumentation equipment in hazardous areas., • Use the CMMS system to process work orders, record time, and support preventive maintenance planning., • Support improvement works and minor modifications in line with engineering and site standards., • Assist with wider engineering activities across the site as required., • Time-served Electrical / Instrument Maintenance Technician with demonstrable experience in a chemical manufacturing or similar high-hazard industrial environment., • NVQ Level 3 (or equivalent) in Electrical Installation or a related discipline., • 18th Edition (BS 7671) qualified., • Strong diagnostic and fault-finding skills across electrical and instrumentation systems., • Good communication skills and the ability to prioritise work effectively. JBRP1_UKTJ

The role: We are currently seeking a proactive and motivated individual to join our Electrical Design Team based in our offices in Newcastle city centre. Working on a variety of exciting and bespoke engineering projects for our Offshore Energy product market group. You will be responsible for: • Electrical Design., • Specification Writing., • Specifying of parts., • Costing of Projects., • Technical Support to Customers., • Inspection and Test / FAT writing., • Working on Electrical Department Standardisation and Efficiency Initiatives., • Undertake the electrical design of work packs or projects with minimal supervision., • Delivery of complex engineering solutions to agreed time scales and budgets., • Ability to estimate, forecast, plan and execute to agreed plans., • Provide technical support and guidance for commissioning and installation activities., • Active engagement in Teams across the business., • Willing to challenge themselves and further their knowledge and experience as well as that of the business. Job requirements: • Degree or Diploma qualified, • Recent experience of a similar role in a bespoke engineering environment, • Experienced in designing:, • Power distribution systems at both 230V & 440VAC, • Machine control and instrumentation systems, • Control Panel design, • Motor starter or VSD design, • Experienced in Electrical CAD packages., • Experienced in working to ISO9001 or equivalent in a project based organization, • Eplan Electric P8 experience, • Previous experience within the Marine / Offshore environment, • Working knowledge of DNV GL & Lloyds rules, • Experience of working with Subsea Vehicles including design of High Voltage systems, • Knowledge & experience of relevant functional safety standards (IEC61508, IEC61511, IEC13849), • Commissioning & Test experience (advantageous), • Good communicator, • active and participating member of teams, department and project teams JBRP1_UKTJ

Salary:Competitivesalary Benefits:Companysharesave scheme,Pension up to 8% matched, Life insurance up to 4x salary Location:Tilmanstone Ways ofworking:Sitebased Hours of work:4 on 4 off Days & Nights rotating 6am -6pm / 6pm- 6am Contracttype:Permanent Why Greencore? Following the combination with Bakkavor in January 2026, were one of the UKs leading creators of convenience food, driven by a simple purpose: to make every day taste better. As a vibrant and fast-moving business,wereproud to employ over 28,000 talented colleagues across 39 manufacturing sites and 21 distribution depots in the UK and the US. Together, we bring delicious food to life. Our products cover every meal occasion from breakfast through to dinner and dessert, with lunch and snacking in between. In FY25, our shared passion helped us achieve combined revenues of approximately £4bn.? Our extensive direct to store (DTS) network, with 17 depots across the UK, allows us to deliver fresh and frozen food both our own and from trusted partners to thousands of stores every day, ensuring consumers enjoy thevery best, whenever and wherever they shop. Our site inTilmanstone, near Dover, Kent, employs around 850 people and produces millions of bags of leafy salads and prepared vegetables for a dedicated customer. The siteoperatesat a fast-paced, high-volume level. Whatyoullbe doing In this busy and exciting role, you will bring your engineering skills and problem-solving abilities to our team to helpmaintainand optimise our food and drink processing and packaging assets. Youllplay a key part in keeping production running smoothly, safely, and efficiently-ensuring that our equipment performs at its best to deliver high-quality products for our customers. Youllbe involved in a wide range of engineering activities, from planned and predictive maintenance to responding to breakdowns and implementing improvements. Working closely with operational teams,youlluse your technicalexpertiseto diagnose faults, carry out repairs, and contribute to continuous improvement projects that enhance efficiency, reliability, and profitability. Role Accountabilities: • Prepare and carry out maintenance work on food and drink processing and packaging equipment., • Conduct planned and predictive maintenance to optimise performance and prevent downtime., • Respond promptly to breakdowns, carrying out repairs or corrective actions asrequired., • Diagnose and resolve electrical, mechanical, instrumentation, automation, and pneumatic faults., • Support operational teams with machinery changeovers, set-ups, and adjustments., • Manufacture or repaircomponentparts tomaintainequipment reliability., • Contribute to continuous improvement projects and technical performance reviews., • Identifyand implement engineering solutions to improve efficiency and profitability., • Maintainaccuratemaintenance and engineering documentation., • Ensure maintenance tools and equipment are available, safe, and wellmaintained., • Support and mentor team members to develop technical skills and competence., • Level 2 Maths/English; recognised Engineering Apprenticeship (C&G/EAL NVQ 3/4 or OAL FDEM)., • First-year requirements: IET Wiring Regs, Level 2 Food Safety, CMMS training, contractor control., • Role develops multi-skilled capability with electrical bias., • Strong problem-solving, communication and teamwork., • Knowledge of SHE procedures., • Experience in fault finding, maintenance planning, IT systems and following SOPs., • Mechanical/electrical knowledge: hydraulics, pneumatics, motors, PLCs, sensors., • Understanding of asset performance and spare parts management. If this sounds like you, join us and grow with Greencore, and be a part of driving our future success. Whatyoullget in return • Competitive salary and job-related benefits, • Holidays, • Pension up to 8% matched, • Life insurance up to 4x salary, • Companysharesave scheme, • Greencore Qualifications, • Exclusive Greencore employee discount platform, • Access to a full Wellbeing Centre platform #LI-LM1 #CVL? JBRP1_UKTJ

Youll replace and calibrating instruments, installing new systems and equipment, and commissioning, all in line with BS7671 18th Edition standards. We enhance and extend asset life, ensuring compliance with water quality and environmental standards. Delivering essential infrastructure services for l

About Arup Dedicated to sustainable development, Arup is a collective of designers, consultants and experts working globally. At Arup you will have the opportunity to collaborate on ambitious projects - delivering remarkable outcomes for clients and communities, and to do socially useful work that has meaning. Arup's purpose, shared values and collaborative approach has set it apart for over 75 years, and now is your opportunity to join. Job description - the role AMS is the world's leading provider of Talent Acquisition and Management Services. Our contingent Workforce Solutions (CWS) service acts as an extension of our clients' recruitment team and provides professional interim and temporary resources. We partner with Arup to support contingent recruitment processes. On behalf of Arup, we are looking for a Senior Electrical Engineer for a 6 month contract based in Manchester. Candidate Profile: Key accountabilities, skills & experience Role - Senior Electrical Engineer We have an opportunity for a driven senior electrical engineer looking for technically challenging work on one of Europe's engineering sites to join our established ISA CE&I Engineering delivery team in Whitehaven. You will be client-facing, run projects and help to develop and inspire junior engineers. As a Senior Electrical Engineer with drive and experience, you will be a key part of the CE&I team leadership; managing multi-disciplinary projects while providing technical support and mentoring to the other engineers. Your role will involve managing in a dynamic and stimulating environment with many opportunities to apply your knowledge and expertise to a range of exciting projects. You will take an active role in pushing forward the electrical team members' skills and abilities in the Whitehaven office, including supervising and training junior engineers. You will run infrastructure projects of various sizes, taking an active role in project leadership and client-facing activity. You will be involved in and overseeing feasibility, full design duties and site stage activities of major and minor projects (new and refurbishment). Essential Skills and Knowledge A demonstrable track record of successful delivery within an electrical and/or control & instrumentation engineering role/environment including: • MV / LV power design and distribution, • Building services systems including fire alarm, security, lighting design, lightning protection, earthing etc, • Control & Instrumentation systems, • Strong track record of running project teams, • A clear understanding of, or experience within a client-facing & construction environment., • Excellent analytical and problem-solving skills, • Adaptable, resilient and able to work in multi-disciplinary settings, • Excellent interpersonal and communication skills, • Professional, organised, and highly methodical, • Demonstrable knowledge of engineering was a key attribute. Have worked within a regulated and quality assured system in roles reliant upon professional engineering judgment and design was a major part of the role., • Experience of working in a wide variety of sectors, infrastructure & nuclear would be advantageous., • Good knowledge of BS 7671 and related documents, • Good knowledge of CDM regulations, • CAD, Revit, Amtech & other digital design packages knowledge & skills Holding a P4/P1 pass and BPSS/SC clearance will be a distinct advantage. Otherwise, the role holder will be required to obtain the following clearances: • Basic Clearance (BPSS), • P4/P1 Pass, • Scottish Disclosure or equivalent as defined by Sellafield Ltd About the client Diversity at Arup: Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. Guided by its values and alignment with the UN Sustainable Development Goals, Arup creates and contributes to equitable spaces and systems, while cultivating a sense of belonging for all. Arup's internal employee networks support their inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - creating a space for everyone to express themselves and make a positive difference. If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and speak to one of our Sourcing Specialists. AMS are committed to providing all our candidates with the opportunity to perform at their best throughout the recruitment process. Please let us know if you require any additional support or reasonable adjustments during the screening process and we will work with you and Arup to identify the best solution to meet your requirements. AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business. JBRP1_UKTJ

Astute's Power team are looking to recruit an Electrical Instrumentation and Control Site Supervisor on a 12-month contract for a project in Essex from June 2026. Key skills • Take ownership of EIC site activities across electrical, instrumentation, and control systems, • Act as the key on-site interface between contractors, site management, and engineering teams, • Support installation, testing, and commissioning to meet programme milestones, • Drive safe, efficient execution aligned to project timelines and quality standards, • Provide practical, on-the-ground leadership to ensure work is delivered right first time, • Lead and enforce HSEQ standards, ensuring all works are carried out in line with approved RAMS, • Coordinate subcontractors and vendors to maintain progress and resolve issues quickly, • Manage defects, punch lists, and completion activities through to close-out, • Support testing, commissioning, and fault-finding across EIC systems, • Raise and manage site changes, deviations, and interface issues with the wider project team, • Must be someone has who proven experience in EIC Supervision ideally within an EFW (Energy from Waste) / Energy project (Power, Oil & Gas etc)., • Must have a strong background working in live construction and commissioning environments, • Must hold an SSSTS (or equivalent), • Must have experience within HV/LV/MW systems, instrumentation and control systems i.e. PLC /DCS Location, remuneration and timeframe of the Electrical Instrumentation and Control Site Supervisor role • Essex, • June 2026, • 12 Months min Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful. JBRP1_UKTJ

Asset Support Engineer Competitive Salary + Great benefits Alton, Hampshire MC Technical Recruitment are currently looking to recruit an Asset Support Engineer for a Gas Storage Facility based in Alton. As an Asset Support Engineer, you will be responsible for: • Maintain and ensure accuracy of the Enterprise Asset Management (EAM) system, including asset registers, hierarchies, categories, and criticality data, • Ensure preventative maintenance (PM) and corrective maintenance (CM) work orders are correctly scheduled, prioritised, and closed within the EAM system, • Coordinate with Operations, Maintenance, and Engineering teams to track asset status before and after maintenance or inspection activities., • Work with procurement and stock control to link spare parts and tools to maintenance plans and ensure sufficient inventory for planned maintenance., • Assist in maintenance shutdown planning and budgeting, including providing cost/pricing data to support short- and long-term asset management planning., • Strong knowledge of mechanical and electrical equipment and systems, • Experience working with industrial plant equipment such as instrumentation, motors, switchgear, valves, compressors and pumps, • Practical experience using CMMS/EAM system from a user, supervisory or implementation perspective, • A competitive salary, • 25 Days holiday, • STIP Potential of 15% salary based on completion of individual targets and the company performance, • Group life assurance 8x salary, • £600/year Gym allowance, • Pension 10% company contribution, • Hours: Monday – Friday 09:00-17:00 JBRP1_UKTJ

Job Description Location: Hybrid working with 2-3 days per week in United Utilities Lingley Mere office. Site visits as required. Permanent full-time(40 hours) Competitive salary plus benefits We are seeking Electrical Engineers with extensive experience and understanding of sewage treatment processes and the equipment/system requirements. What this role requires: • Ability to generate innovative and/or technically differentiated solutions to problems, to deliver added value for clients., • Extensive experience and expertise in the production of Electrical, Instrumentation, Control and Automation (EICA) design deliverables., • Ability to manage a CAD resource to produce engineering drawings., • Ability to manage and mentor junior engineers including training and development., • Line management responsibilities., • Ability to foster and develop positive relationships through support of business partners and key clients., • Extensive experience in feasibility, outline, and detailed design., • • Extensive experience proposal fee / hours estimation for design schemes., • Extensive experience conducting technical reviews., • Commercial and contractual awareness., • Desire to understand and promote the Company purpose, vision, values, and culture., • Working knowledge of Microsoft (Office) 365 packages., • An industry applicable BEng, BSc, or equivalent in an electrical discipline., • Recognition that satisfying the customer is the key to achieving other objectives, and that customers include everyone receiving benefits from our processes, whether end-users or other departments within the company., • Ability to work remotely whilst successfully achieving deliverable-based outcomes through a virtual team., • Ability to prioritise a varied workload and demonstrate good time management to comply with deadlines., • Organised, structured and professional, with a passion for excellence., • Encouraging and motivating those around you to work to your own high standards of quality and compliance., • Desire for continual learning and drive to improve those around you by sharing information, lessons learnt and best practice., • Ability to build and maintain strong relationships with colleagues and clients., • Good interpersonal, verbal, and written communication skills., • Trustworthy and ethical approach, exercising discretion where required., • An industry applicable BEng, BSc, or equivalent in electrical engineering., • Chartered Engineer or working towards this. Relevant experience will also be considered.Examples of work types, • Site surveys and assessments of the capacity of the plant to meet future demands., • Feasibility, outline, and detailed electrical design, including P&IDs, instrument schedule, load schedules, load assessments, MCC specifications, cable calculations, system architectures, user requirement specifications, cable calculations, fault studies, block cable diagrams, single line diagrams, earthing diagrams, I/O schedules, loop diagrams, SCADA and telemetry design and lightning assessments., • Technical report writing at all stages of the project lifecycle., • Production of general arrangement drawings and detail electrical design drawings., • Support fee proposals or offers of service; development of activity schedules/work plans., • Understanding of DSEAR, CDM, WIMES, British and European Standards and other statutory, regulatory, and non-regulatory provisions and guidance., • Participation in Hazard Studies including HAZOP, HAZCON and HAZCOM., • Development of standard and bespoke design solutions for the water industry and beyond., • Check and review calculations and reports prepared by others. • Undertaking Layers of Protection Analysis (LOPA)., • Undertaking Safety Integrity Level (SIL) Assessments., • Undertaking DSEAR assessments., • Experience with AMTECH/TRIMBLE to produce cable calculations, cable schedules, fault studies and discrimination studies., • Experience with AutoCAD although not essential., • Experience with HV electrical systems design and specification. Although not essential. • Competitive salary + discretionary bonus, • Company pension, • 25 days annual leave + Bank holidays + option to purchase additional leave., • Salary Sacrifice Pension scheme, • Company mobile phone and laptop provided., • Training and career progression opportunities, • Professional Membership fees paid., • Life Assurance Scheme 4 x annual salary, • Employee Assistance Programme (with access to GP appointments, Physio appointments and Mental Health Support), • Medicash cash plan (Money back on everyday healthcare costs such as dental, glasses, contact lenses), • Refer a friend scheme. JBRP1_UKTJ

Job Description Electrical Engineering Manager Chichester Permanent, full-time Competitive salary plus benefits The Electrical Engineering Manager will be primarily based in the office managing the day to day operations of the electrical design and commissioning team including high level process and electrical design & instrumentation selection. This will also include assisting with preparation & conducting system inspections (FATs) with customers in attendance and assisting with onsite commissioning and varied tasks at times and as such, you will be required to travel to customer sites. More about the role: • Manage and support Electrical Design and Commissioning team including annual appraisals, • Responsibility for all electrical and commissioning aspects of projects, • Grow and develop the team to support company growth, • Review/develop project maps, leading to placement of Purchase Order requests, • Manage approval process for electrical designs for compliance with engineering principles, company standards, customer contract requirements, and related specifications. (P&ID, Technical Drawings, Wiring Diagrams, Instrument Hook-ups, Control Philosophy documents, Functional Design Specs etc), • Participate/support in activities concerned with technical developments, scheduling, resolving engineering design and test problems., • Propose/Review suitable electrical components for projects (Instrumentation, Valves, Pumps, Switch Gear, PLCs etc), • Support/Participation in Factory Acceptance Test planning and execution, • Provide technical support to commercial team on project tenders, • Manage project schedule and provide updates to project managers and/or customers, • Develop/maintain knowledge & understanding Explosive Atmospheres (ISO/IEC 80079-34), • Minimum HNC Level in Electrical Engineering or equivalent, • Minimum 10 years industry experience in an electrical design field., • Committed to a career in the Electrical Engineering Profession, • Ability to work under pressure and meet deadlines., • Sound knowledge of IT, including use of Microsoft applications., • Awareness & understanding of Quality, Environmental, Safety & Explosive Atmospheres Standards & working procedures., • Use of design software (AutoCAD LT)., • Understanding of controllers / PLCs / VSDs., • Ability to perform related administration tasks., • To be able to work independently & as part of a team., • Possess good time management skills, being punctual and organised. JBRP1_UKTJ

Position: EC&I Technician (Electrical, Control & Instrumentation Technician) Read the overview of this opportunity to understand what skills, including and relevant soft skills and software package proficiencies, are required. Location: Liverpool Salary: £35-40k DOE Electrical, Control, and Instrumentation Technician required for a pharmaceutical manufacturer based in the Liverpool area. xrnqpay This is an exciting opportunity to join the Assembly team as an EC&I Technician. The primary purpose of the role is to work on a project from control engineering Please click on the apply button to read the full job description

Job Title: Senior Engineer Electrical Engineering (Control & Instrumentation) Location: Barrow-in-Furness Hybrid (2 days onsite per fortnight dependent on business needs) We offer a range of hybrid and flexible working arrangements please speak to your recruiter about the options for this particu

Electrical, Control & Instrumentation Maintenance EngineerWinsfordMonday to Friday - Working Earlies, Lates and NightsUp to £49,000 We are looking for a motivated Electrical Maintenance Engineer to join a leading heavy industry business. Reporting directly to the e

Instrument Control Automation Technician (Control and Instrumentation Technician) - London, Greater London, E17 1HEContract: PermanentSalary: Offering up to £47,000 per annum depending on your level of experience,plus Standby rota payments & Overtime opportunities can increase the earning potential

The vital Control & Instrumentation Engineer role comes with a competitive salary banding + a performance related bonus + other excellent benefits. Astute's Power Team is partnered with a market-leading Energy company to recruit a Control & Instrumentation (C&I) Engineer to join their Combined Cycle

The Electrical and Instrumentation Engineer is responsible for coordinating technical clarifications, resolving supplier and client queries, and supporting the engineering process through design, procurement, and delivery phases of the project lifecycle. Work closely with other engineering teams to

You will be responsible for managing, maintaining, and improving control and instrumentation systems, ensuring effective, efficient, and safe operations, also providing technical support across operations, maintenance, and projects, ensuring adherence to engineering standards and driving performance

Provide specialist technical advice and design governance, ensuring adherence to technical standards and promoting collaboration across Design and other functions. Allocate tasks and check outputs for a team of Designers, ensuring coordination across disciplines and compliance with company and regul

Act as the SME - Subject Matter Expert and technical authority for all C&I engineering matters and projects, including instrumentation, control systems, and safety compliance - this is 50% of the role. Develop and maintain engineering standards, processes, and strategies. You’ll oversee a group of

At Cavendish Nuclear we’re working to create a safe and secure world, together, and if you join us, you can play your part as a Senior Electrical, Control and Instrumentation (EC&I) Engineer at Cavendish Nuclear, based at one of our key locations – Moor Row (Cumbria), Warrington (Cheshire), Leic

At Cavendish Nuclear we’re working to create a safe and secure world, together, and if you join us, you can play your part as a Field Electrical, Control and Instrumentation (EC&I) Technician. You work with specialised equipment and safety systems, apply rigorous test standards, and help ensure re

Qualification achieved: Engineering Maintenance Technician - Level 3 City & Guilds Diploma in Engineering (single discipline), aligned with IMechE and IET standards for Engineering Technician (EngTech), GCSE Maths and English (grades 9-4 / A-C). Youll gain hands-on experience managing the technolo

We believe that diversity and inclusion strengthen and enriches us, and that it is the responsibility of everyone at the City & Guilds Group to drive this value. Produce City & Guilds and Provider reports and feedback for each type of activity. Provide advice on T Level and the Technical Qualificati

If you’re an experienced Control & Instrumentation and are looking to work for a leading organisation who invests in training and professional development of their employees, then upload your CV to apply today. A formal engineering qualification in a relevant subject such as Electrical/Electronic/

Duties include moderating marking, producing reports, and participating in standardisation training. We encourage applications from diverse communities, aligning with our commitment to diversity and inclusion.

Leading the design and delivery of electrical, control and instrumentation systems for major nuclear projects. At Cavendish Nuclear we’re working to create a safe and secure world, together, if you join us, you can play your part as a Principal Electrical, Control and Instrumentation Engineer, bas

Together we provide integrated engineering and project management services across the project lifecycle – from concept and design to construction and operations, to decommissioning or repowering and life extension. Support the execution of control and instrumentation work on projects, in accordanc

At Cavendish Nuclear we're working to create a safe and secure world, together, and if you join us, you can play your part as a Field Electrical, Control and Instrumentation (EC&I) Technician. You work with specialised equipment and safety systems, apply rigorous test standards, and help ensure reli

Responsibilities include moderating marking, producing quality reports, and participating in standardisation activities. The ideal candidates will have prior experience in quality assurance and moderation. Applications from diverse and underrepresented communities are strongly encouraged.