Trabajos manufacturing process engineer en HayesCrear alertas

New Equipment Engineer Job - Middlesex An exciting opportunity has arisen in Middlesex for an experienced Equipment Maintenance Engineer to join a highly skilled Technical Services function supporting complex manufacturing and test environments. Key Duties and Responsibilities The Equipment Maintenance Engineer will: • Carry out repairs, improvements, and de-risking activities on manufacturing and test equipment., • Support engineering programmes addressing obsolescence, unreliability, and process risk., • Contribute to the upgrade, refurbishment, and replacement of complex equipment including vacuum systems, high-voltage systems, RF systems, scientific furnaces, thin-film coating systems, and control hardware., • Work closely with multi-disciplinary engineering teams and external contractors to ensure work is delivered safely, on time, and to specification., • Assist with technical specifications, supplier evaluations, and contractor proposals. Experience and Technical Background The successful Equipment Maintenance Engineer will demonstrate strong practical and technical experience in several of the following areas: • High-risk systems such as high voltage, high energy, vacuum, plasma, RF, and complex control systems., • Engineering support within manufacturing, electronics, or advanced technology environments., • Capital equipment upgrades, lifecycle planning, and commissioning activities., • Risk assessments and health and safety compliance. Personal Attributes The Equipment Maintenance Engineer will bring: • A hands-on approach with sound engineering judgement and attention to detail., • The ability to analyse complex problems and propose practical, long-term solutions. Qualifications • Degree or equivalent qualification in Electrical/Electronic Engineering, Aeronautical Engineering, Mechatronics, or a related discipline., • HNC/HND or military engineering qualifications will be considered with substantial relevant experience. This Equipment Maintenance Engineer role offers the opportunity to work on technically challenging equipment in a safety-critical environment, based in Middlesex, with significant scope to influence long-term engineering capability and reliability. You can also contact Keelan Riley on or call 01525 664852 for more information

Junior Mechanical Maintenance Engineer\n£28,000 - £30,000 + Overtime + Training + Benefits\nTuesday - Saturday, 07:00 - 15:30\nHayes, London - Commutable from West Drayton, Southall, Uxbridge & Hounslow\n\nDo you have fabrication experience and mechanical engineering knowledge? Are you looking for a new opportunity within a leading organisation that can offer first class training and development? Do you want a days based maintenance role that offers you the chance to progress within and enhance your skillset?\n\nDue to continued growth, my client is looking for a mechanical maintenance engineer to join the team, working out of their state of the art facility near Hayes. The successful applicant will be responsible for working within the plant on a range of commercial and plant machinery providing planned, reactive and preventive maintenance. You will be playing a key role in ensuring that all equipment is operating at maximum efficiency enabling all projects are completed on time, meeting industry and customer standards. This is an outstanding role for someone looking for day to day variety and wants to grow their skillset within a range of electrical and mechanical equipment and machinery within in a fast paced environment.\n\nThis is a great opportunity to join an established business who pride themselves on staff retention and development. Due to another year of expansion, the company are looking to make multiple hires during the early stages of the year and will be looking to promote within when future roles open up.\n\nFor more information please click apply and contact Patrick Walsh - (phone number removed) - REF 4934\n\nThe Role:\nReactive and planned maintenance\n* Tuesday - Saturday, 07:00 - 15:30\n\nThe Candidate:\nQualifications are desired\n*A commutable distance to Hayes\n\nelix Sourcing Solutions is a specialist recruiter for Engineering, IT and Science roles ranging from mid to senior level positions. Please be aware that we will only accept applications from candidates that have a valid work permit to work in the UK. By applying to this job, you are confirming that you do not hold a criminal record and that you know of no legal reason why you would be ineligible for employment.\n\nWelder|Welding|Fabricator|Fabrication||Electromechanical|Mechanical|Maintenance|Multi Skilled|Electrical|PPM|Fault Finding|Process Mechanical|Electrical|Engineering|Machinery|FMCG|Manufacturing|Testing|Inspecting|Repairs|Fitter|Operator|PLC|Electric|wiring|Control|systems|Conveyors|Production|Engineering|Engineered|Engineer|Fitter|Technician|London|West London|Hayes|West Drayton|Heathrow|Southall|Uxbridge|Hounslow|Junior|Trainee|Grad|Graduate|Apprentice|Training

Lead Maintenance Engineer London (Wembley/ Park Royal)\n\nSalary: £62,000 plus bonus \n Shifts: 4 on 4 off DAYS only\n Sector: Manufacturing / Production\n\nOverview\n\nOn behalf of our client, a leading name in the manufacturing sector, we are recruiting for an experienced Lead Maintenance Engineer. This role offers an excellent opportunity for a hands-on engineer with strong leadership skills and an electrical bias to take ownership of maintenance operations within a busy production environment.\n\nThe successful Lead Maintenance Engineer will be responsible for both supervising the maintenance team and remaining actively involved in day-to-day maintenance and repair activities across the facility.\n\nKey Responsibilities\n\nAct as the Lead Maintenance Engineer, overseeing and coordinating all site maintenance tasks.\nLead, guide, and support a team of multi-skilled maintenance technicians, ensuring smooth operation and minimal downtime.\nRemain hands-on, carrying out fault finding, repairs, and preventative maintenance on a range of electrical and mechanical machinery.\nPlan and manage preventative maintenance schedules, ensuring all work is completed to high standards and in a timely manner.\nSupport continuous improvement initiatives, recommending and implementing efficiency and reliability enhancements.\nEnsure compliance with health and safety regulations and company maintenance standards.\nLiaise with production and operations teams to quickly resolve technical issues and support manufacturing targets.Candidate Requirements\n\nProven experience as a Lead Maintenance Engineer or Senior Maintenance Engineer in a manufacturing or production environment.\nHand on experience of maintaining machinery. \nPrevious experience leading or mentoring a maintenance team.\nRecognised engineering qualification (HNC/HND/NVQ Level 3 or equivalent) in Electrical or Mechanical Engineering.\nStrong problem-solving abilities and a proactive approach to maintenance.\nExcellent communication and organisational skills.\nFlexibility to support shift patterns or call-out requirements as needed.Opportunity\n\nThis is an exciting opportunity for a driven and capable Lead Maintenance Engineer to join a well-established manufacturer with a strong reputation for quality and innovation. The role offers stability, career progression, and the chance to make a real impact on the performance and reliability of key production assets.\n\nKeywords / Tags: Engineering Team Leader, Lead Maintenance Engineer, FMCG Jobs, Manufacturing Jobs, Reliability Engineering, Maintenance Supervisor, Preventive Maintenance, Leadership in Engineering\n\nApplication Process\n\nIf you have the above skills and wish to be considered for this Engineering Team Leader/ Lead Maintenance Engineer position or find out more details then please contact Simon on (phone number removed) or submit your CV to (url removed) or simply click apply below.\n\nLead Maintenance Engineer is commutable from Watford, Acton, Southall, Slough, Staines, Twickenham, Edgware, Stanmore, Rickamansworth, Hendon, Ruislip, Harrow, Heathrow, Beaconsfield, Amersham, Barnet, Hounslow, Ickenham, Windsor and other parts of Herfordshire, Buckinghamshire and London\n\nWhy work with Proactive?\n\nProactive Global are an industry leading, specialist engineering recruitment agency focused on the automation, manufacturing and robotics sectors. We offer specialist recruitment services to a niche customer base, vetting that our clients offer the best opportunities for your career. Proactive encourages and promotes equality and diversity within the workforce. We act with honesty, integrity and impartiality, ensuring your application is considered on its own merits and without bias. When registering with Proactive you will have the opportunity to apply for some of the most interesting, specialist, opportunities in the marketplace, with the biggest companies in the sector. Follow us on Linkedin and Facebook for industry news and download our app for live notifications about newly listed vacancies. We look forward to helping you find your next role!\n\nProactive Global is committed to equality in the workplace and is an equal opportunity employer.\nProactive Global is acting as an Employment Business in relation to this vacancy

Maintenance Engineer (Food / Beverage / FMCG)\n\nLocation: Hounslow\n Salary: £40,000 - £45,000 (DOE)\n Contract: Full-time, Permanent\n Shifts: Shifts may start as early as 06:00 and finish as late as 22:30 (8h 30min shifts). \nAre you a skilled Maintenance Engineer looking to join a fast-paced, high-performing team?\n\nWe're recruiting for a Multi-Skilled Maintenance Engineer to support our busy food production facility in Hounslow. This is a hands-on role where you'll be essential in maintaining equipment reliability, reducing downtime, and driving continuous improvement across manufacturing and packaging operations.\n\nWhat You'll Be Doing\n\nCarrying out planned preventative maintenance (PPM) and reactive maintenance on production and packaging machinery\n\nDiagnosing and repairing mechanical, electrical, hydraulic, pneumatic, and plumbing faults promptly and safely\n\nSupporting process optimisation and OEE (Overall Equipment Effectiveness) improvement projects\n\nWorking closely with Production and Quality teams to meet operational targets\n\nAccurately recording maintenance activities and equipment downtime via the CMMS system\n\nEnsuring compliance with all food safety, hygiene, and health & safety regulations at all times\n\nWhat We're Looking For\n\nTime-served Engineer or equivalent qualification (HNC/HND/NVQ Level 3 in Mechanical, Electrical, or Multi-Skilled Engineering)\n\nProven experience in a fast-moving, semi-automated manufacturing environment (food, beverage, FMCG preferred)\n\nStrong mechanical knowledge with solid electrical fault-finding capabilities and experience working with PLC-controlled equipment\n\nAbility to work effectively within a continental shift pattern\n\nExcellent diagnostic skills, problem-solving ability, and communication skills\n\nKnowledge of DAF plant operations\n\nGas safety certification\n\n17th/18th Edition (if electrically biased)\n\nUnderstanding of Lean Manufacturing and Continuous Improvement principles

Engineering Project Manager\n\nPay: Up to £70,000 + 18% Bonus\n\nLocation: Heathrow\n\nDepartment: Automation\n\nContract: Permanent\n\nPattern: Fully Mobile/Travel Across UK\n\nRole Overview\n\nWe are seeking an experienced Engineering Project Manager to lead the delivery of complex automation projects from concept through to customer handover. This role involves taking the design of a process, facility, or piece of plant and equipment, and managing the full lifecycle including design development, build, installation, commissioning, and final acceptance.\n\nThe successful candidate will have a strong technical background as a Mechanical, Electrical, or Controls & Automation Engineer, with proven experience delivering automation projects, ideally involving automated conveyance systems and robotics.\n\nKey Responsibilities:\n\n * Determine customer delivery requirements and produce Functional Design Specifications (FDS).\n\n * Identify all relevant stakeholders and establish the project delivery team.\n\n * Identify, recruit, or deploy additional resources as required.\n\n * Develop and manage detailed project delivery plans, including critical path analysis.\n\n * Provide regular project updates using the NPDI system and attend weekly project review meetings.\n\n * Demonstrate a clear understanding of Value for Money (VFM) principles and maintain a proven track record of delivering VFM on projects.\n\n * Manage supplier selection through structured procurement processes to ensure VFM.\n\n * Oversee order placement and manage agreed delivery dates in line with SQCDPE requirements.\n\n * Manage and oversee suppliers or in-house teams to ensure manufacturing meets agreed standards and timescales.\n\n * Lead installation and commissioning activities, providing progress updates and identifying risks to programme delivery.\n\n * Define customer acceptance criteria and produce structured launch and handover plans.\n\n * Drive continuous improvement across safety, quality, process, design, procurement, and delivery.\n\n * Ensure all compliance requirements are planned, delivered, and closed out, including (but not limited to) CDM, UKCA, PUWER, and related regulations.\n\nSkills & Experience Required:\n\n * Qualified Mechanical, Electrical, or Controls & Automation Engineer (or demonstrable equivalent experience).\n\n * Proven experience delivering automated process equipment, such as conveyor systems, process plant, or manufacturing facilities.\n\n * Strong understanding of VFM engineering, including associated processes and implementation on projects.\n\n * Experienced Project Manager with a proven track record of delivering multiple projects from concept to completion.\n\n * Sound knowledge of CDM regulations, RAMS, lifting plans, and statutory documentation related to plant and equipment installation.\n\n * Experience managing on-site teams covering mechanical and electrical installation, automation, commissioning, and compliance testing.\n\n * Fully mobile and willing to travel across the UK and Ireland as required

Quality Engineer\n\nSalary: £43k-£50k per annum\nTerm: Permanent\nLocation: Middlesex\n\nOverview\n\nAn exciting opportunity has arisen for an experienced Quality Engineer to join a leading manufacturing company. This role offers the chance to play a key part in the production of innovative solutions for a range of markets.\n\nWe are seeking a dedicated professional to lead and manage Production Part Approval Process (PPAP) activities. The successful candidate will ensure compliance with customer and industry standards while collaborating effectively with internal teams and suppliers.\n\nResponsibilities\n\nAs a Quality Engineer, your key responsibilities will include:\n\nLeading and managing PPAP submissions for new product introductions (NPI), engineering changes, and supplier parts.\nPreparing, reviewing, and approving PPAP documents, including Process Flow Diagrams, PFMEA, Control Plans, dimensional layouts, material certificates, MSA, and capability studies.\nMaintaining PPAP records and customer communications, managing revisions, tracking approval status, and responding to customer feedback.\nActing as the primary quality contact and customer interface for assigned projects.\nPromoting and ensuring successful PPAP submissions.\nSupporting customer and internal meetings to share development status and report customer requirements.\nCollaborating with internal departments (Sales, QA, Engineering, and Production) to meet project deadlines.\nDeveloping, writing, and enhancing processes, plans, and procedures in collaboration with Quality Management.\nInterpreting and communicating customer requirements within the organization.\n\nQualifications\n\nTo be successful in this role, you should possess the following qualifications and skills:\n\nStrong understanding and ability to work with technical drawings and dimensionally measure parts using Non-Contact or Contact measurement equipment.\nProficiency in APQP/PPAP processes and associated tools.\nExpertise in GD&T (Geometric Dimensioning and Tolerancing).\nExperience in preparing Control Plans, FMEAs, and all relevant PPAP documentation.\nAutomotive experience in preparing PPAP/APQP documentation (preferred).\nPrevious experience working with metal parts in the automotive sector (advantageous).\nWorking knowledge of IATF 16949 requirements.\nExcellent reporting and communication skills.\nAbility to work independently with minimal supervision.\nProficiency in Microsoft Office applications.\n\nDay-to-Day\n\nOn a daily basis, you will:\n\nLead PPAP activities and ensure compliance with industry standards.\nCollaborate with cross-functional teams to meet project deadlines.\nCommunicate with customers and suppliers to address quality requirements.\nMaintain accurate documentation and records for PPAP submissions.\nSupport internal and external meetings to provide updates on project progress.\nIf you are a motivated and experienced Quality Engineer with PPAP expertise, this is a fantastic opportunity to join a company that values innovation, collaboration, and excellence. Make a lasting impact within a dynamic and growing industry

Continuous Improvement Engineer Location: Hayes (On-site) Salary: Up to £55k - DOE Working Pattern: MondayFriday, Days - 8am to 4pm As a key member of the Engineering team, youll take ownership of improvement activity across defined production areas. Your focus will be on equipment performance, process optimisation, and structured problem-solving. Youll bring hands-on experience across mechanical, electrical, and basic control systems, with the ability to understand and interpret complex manufacturing processes. Youll spend a significant portion of your time on the factory floor, collaborating closely with Operations, Engineering (Maintenance & Projects), and other stakeholders to uncover issues, drive performance improvements, and deliver sustainable change. Key Responsibilities of thisContinuous Improvement Engineer position: • Lead proactive, structured problem-solving within allocated areas to drive efficiency improvements and eliminate performance losses., • Support escalations requiring longer-term analysis and deeper technical expertise., • Develop standardised processes, troubleshooting guides, and equipment set-up documentation., • Manage improvement projects from initial scoping through to implementation and long-term verification., • Promote and uphold the highest health and safety standard...

Continuous Improvement Engineer Location: Hayes (On-site) Salary: Up to £55k - DOE Working Pattern: Monday–Friday, Days - 8am to 4pm As a key member of the Engineering team, you’ll take ownership of improvement activity across defined production areas. Your focus will be on equipment performance, process optimisation, and structured problem-solving. You’ll bring hands-on experience across mechanical, electrical, and basic control systems, with the ability to understand and interpret complex manufacturing processes. You’ll spend a significant portion of your time on the factory floor, collaborating closely with Operations, Engineering (Maintenance & Projects), and other stakeholders to uncover issues, drive performance improvements, and deliver sustainable change. Key Responsibilities of this Continuous Improvement Engineer position: Lead proactive, structured problem-solving within allocated areas to drive efficiency improvements and eliminate performance losses. Support escalations requiring longer-term analysis and deeper technical expertise. Develop standardised processes, troubleshooting guides, and equipment set-up documentation. Manage improvement projects from initial scoping through to implementation and long-term verification. Promote and uphold the highest health and safety standards, identifying hazards and improving machinery safety. Deliver change projects on ti...

Join Our Team at Smurfit Westrock! Are you searching for a workplace that values you and your growth? At Smurfit Westrock, we’re committed to sustainability, employee well-being, and personal development. About Us We are a global leader in sustainable paper and packaging. Our focus is on the health and safety of our employees, the well-being of our communities, and delivering exceptional service to our customers. We support our team members to reach their full potential in an inclusive environment that values diversity. The Role An opportunity has arisen at Northampton to join the Engineering Team as a Multi-Skilled Engineer with an Electrical Bias. Working as part of a team of engineers you will work alongside another shift Engineer to safely provide planned and reactive maintenance on the production lines and plant equipment. This role will allow you to develop your innovation and technical skills to implement permanent fixes underpinning high performance. You will be working with mechanical and electrical issues. Ideally electrically bias but willing to deal will mechanical issues as well, working in a fast-paced environment ensuring you work with production to prioritise break downs to ensure the customers are not let down. Previous experience within a manufacturing process operation is preferred, but full training will be provided. The key responsibilities will include: • Ensure a robust and clearly communicated safe system of work is applied for all activities that you undertake and properly risk assessed., • Execute planned and unplanned maintenance activities to an agree standard, ensuring safe working always., • Ensure all site assets are maintained to a high standard, meet site requirements and are reliable., • Use SAP to capture all maintenance activities (training will be provided), • Attain the engineering standards across the site by providing functional support and expertise., • To perform on relevant Engineering KPIs, • Ensure parts are booked out correctly to help control stock levels in stores., • Be able to work effectively as a team not only with engineering team but also with production., • Be flexible with working hours (shift cover, overtime), • Good communication skills, • Health and Safety conscious., • Practical and Knowledgeable in maintenance engineering., • Able to read and understand engineering drawings., • Target driven., • Willing to learn, inquisitive and analytical, • Team focused with interpersonal skills, • Competitive salary & benefits, including annual leave, pension, and a Cycle to Work scheme, • Ongoing training and development opportunities, • 24/7 confidential support for you and your family, • Flexible working options and family-friendly policies Smurfit Westrock reserve the right to only shortlist candidates who meet both the Essential and Desirable Criteria. We are an equal opportunities employer, and we welcome applications from all suitably qualified persons regardless of their sex; religious or similar philosophical belief; political opinion; race; age; sexual orientation; or, whether they are married or are in a civil partnership; or, whether they are disabled; or whether they have undergone, are undergoing or intend to undergo gender reassignment. We practice equality of opportunity in employment and select the best person for the job.

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across nine sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be part of our BlueBear Business in Bedfordshire. This Senior Electronics Engineer position will work in the electronics design and prototyping department, performing key electronics designs in support of larger projects and guiding of electronic engineers within the team. This role is suited to a person with extensive experience in detailed electronic design, strong knowledge of safety- and mission-critical development environments, including DO-254 compliance and controlled design documentation processes. Key Responsibilities: Technical Leadership & Design Execution: * Own and drive the electronic hardware designs for specific designs, implementing full design lifecycle from requirements capture through to production release. * Perform detailed design activities for digital, mixed-signal, Application Processor and FPGA-based, and high-reliability systems. * Provide expert review and approval of schematics, PCB layouts, component selection, and detailed design documentation. Design Standardisation & Quality Governance: * Act as one of the organisational Subject Matter Expert for DO-254 processes, standards, and industry best practice. * Maintain design assurance processes and verification traceability across safety-critical electronics developments. * Oversee configuration control, Verification and Validation activities Project & Stakeholder Coordination: * Work cross-functionally with Systems Engineering, Software, Mechanical, Test, and Programme Management teams to ensure aligned delivery. * Support bid development, cost estimation, design planning, and reporting to internal and customer stakeholders. * Ensure workloads, priorities, project risks, and dependencies are managed effectively to meet schedule commitments. Qualifications and Skills: Essential: • Strong project and programme management experience., • 5-8 years experience in electronics hardware design across digital and mixed signal systems, • Experience applying and designing to DO-254, • At least 1 year of wiring and PCB rework experience., • Significant expertise in detailed electronics hardware design., • Detailed understanding of the electronics manufacturing processes, • Excellent attention to detail., • Process driven, ability to read legislation and implement processes to ensure adherence., • Excellent time management/prioritisation skills, • Highly organised and able to work multi projects in fast paced environment, • Adaptable personality with professional approach, • Good verbal and written communication skills, • Excellent organisation skills, • Conscientious, with a proactive work ethic Desirable: • Experience of interfacing with subcontractors, • Experience writing VHDL or Verilog, • Experience writing embedded C and Python Subject to UK MoD security clearance vetting to a minimum SC level As a National Security Vetting clearance is required for this role, applicants will be required to hold National Security Vetting clearance to SC level or have the ability to gain it. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.

A leading aerospace manufacturer is seeking a Process Engineer in Denham to support manufacturing operations by developing and improving processes focused on risk management and safety.

A leading aerospace manufacturer in the UK is seeking a Process Engineer to help develop and improve manufacturing processes.The role involves engaging with shop floor teams and ensuring operational discipline.The successful candidate will possess strong knowledge of manufacturing philosophies and e

Reporting to the Manufacturing Readiness & Technologies Leader, the Lead Manufacturing Readiness Engineer is a key part of driving lean initiatives across the Manufacturing Readiness Team and the various manufacturing process areas to realise real world improvements in safety, quality, delivery, and

A family-owned industrial company in the West Midlands seeks a Process Improvement Engineering Specialist. The role involves enhancing process consistency, conducting trials, and developing training programs.

A leading engineering firm in Greater London seeks a Manufacturing Process Engineer for NPI Projects. The role involves collaborating with R&D, managing projects, and ensuring high-quality process compliance.

A prominent industry organization in the United Kingdom is looking for a Manufacturing Engineer to enhance engineering processes and manage production projects. Key requirements include a degree in Mechanical Engineering, experience in manufacturing, and strong IT skills.

A leading recruitment firm is seeking a Manufacturing Process Engineer to design and implement lean improvements in assembly processes. Applicants must hold a relevant engineering degree and have experience in manufacturing environments.

We are seeking an experienced Senior Technical Engineering Consultant with a strong background in naval platforms, maritime systems, and defence engineering. This role is ideal for a senior engineer with both deep technical knowledge and the consulting skills to influence stakeholders, shape enginee

Manufacturing Process Engineer, CI Engineer, Lean, Kaizen, SMED, Six Sigma, Machining, CNC, Welding, Fabrication, Assembly, Process Engineering, OEE, Continuous Improvement, CapEx, Process Optimisation, DFM, DFA, Luton, Bedfordshire. Manufacturing Process Engineer. Work with Manufacturing, Engineeri

We’re looking for a Manufacturing Process Engineer to help shape the future of assembly processes. Manufacturing Process Engineer (NPI Projects). A degree in Mechanical, Industrial, Production, or related Engineering field.

A leading automotive manufacturer in the UK is seeking a Battery Manufacturing Process Engineer to innovate and implement processes for new battery lines. The ideal candidate has hands-on engineering experience, particularly with CAD systems.

A leading biotech firm based in London is seeking a Senior Process Engineer to define, develop, and optimize its manufacturing processes. Candidates should have a degree in Engineering or related fields and significant experience in process development. The role involves ensuring manufacturing robus

A leading recruitment firm in the UK is looking for a Manufacturing Engineer to provide vital technical support in high-precision manufacturing. Required qualifications include at least an HND in mechanical or manufacturing discipline, strong CAD skills (SolidWorks preferred), and experience in a ma

Are you a Manufacturing or Process Engineer looking for your next opportunity?. If so, Expleo have an opportunity for you! One of the world’s largest automotive manufacturers, is currently recruiting for a Manufacturing Assembly Process Engineer, to help them develop unique and innovative automoti

A leading engineering services firm based in Solihull is seeking a Manufacturing Assembly Process Engineer for a contract role. The ideal candidate has a degree in manufacturing or related fields and relevant experience in engineering processes. The position emphasizes designing, developing, and enh

A leading recruitment agency in the UK is seeking an experienced CNC Manufacturing Engineer in Ringwood. The ideal candidate will have proven programming skills, experience with Mill/Turn machines, and an engineering qualification. The role involves programming and enhancing manufacturing operations

Previous experience of Manufacturing / Engineering processes, tools and techniques. JOB TITLE: Battery Manufacturing Process Engineer. You'll collaborate with a team of expert technicians and problem‑solvers and use cutting‑edge tools, facilities, and processes engineered together to build era��

A leading automotive organisation in Gerrards Cross is seeking a hands-on Manufacturing / Process Engineer to support production. Candidates should have a manufacturing background and experience in continuous improvement.

A leading recruitment consultancy is seeking a Manufacturing Engineer for a modern, established business in Nuneaton. This role involves optimizing CNC machining processes and requires a precision engineering background.

A leading automotive organization in the UK is seeking a Manufacturing / Process Engineer to support production activities and improve assembly operations. The ideal candidate will have a manufacturing background, strong production mindset, and the ability to interpret technical drawings.

A global medical technology company based in the UK is seeking an experienced engineer to lead process engineering and production support. Engineering and at least 8 years of relevant experience, focused on problem-solving and optimization. This role includes establishing manufacturing quality plans

This full-time role focuses on transforming manual workflows into robust, scalable manufacturing processes. The ideal candidate should have a degree in Engineering and 2–5 years of experience in process development, preferably within the regulated medical devices industry. A cutting-edge health te

The ideal candidate will collaborate with engineering teams to improve processes and ensure production efficiency. A leading aircraft manufacturer based in Broughton is seeking a Manufacturing Engineer to enhance their aircraft assembly operations.

We are seeking an experienced Senior Technical Engineering Consultant with a strong background in naval platforms, maritime systems, and defence engineering. This role is ideal for a senior engineer with both deep technical knowledge and the consulting skills to influence stakeholders, shape enginee

A leading engineering and design firm in the UK seeks a Manufacturing Engineer to enhance process efficiency and ensure high-quality output. You will develop and optimise manufacturing processes, supporting New Product Introductions while collaborating across teams. Candidates should hold a degree i

A global industrial company is looking for an experienced Manufacturing Engineer to support production processes at their Redditch facility. Essential skills include a degree in Manufacturing Engineering and experience with Microsoft Office. The successful candidate will lead projects and implement

Manufacturing Assembly Process Engineering focuses on designing, developing, and implementing new or revised processes for assembling the component parts and subassemblies required for a finished product including:. Relevant previous experience of Manufacturing / Engineering processes, tools and tec

A leading medical technology firm in the UK is seeking a Manufacturing Engineer to join their team in Oxfordshire. The role involves tackling manufacturing challenges, driving quality, and supporting innovative technology processes. Candidates should have a degree in Engineering or relevant experien

Proven experience in manufacturing or engineering processes, tools and techniques, ideally within automotive or electric drive unit environments. JOB TITLE: Manufacturing Process Engineer - Assembly. Manage, support and resolve technical and manufacturing issues, escalating appropriately and collabo

Process Validation role to support thermal processing clients with consultancy, training and research activities. Develop process validation and engineering services. Basic understanding of thermal processing in industry.

The successful Manufacturing Engineer will be given responsibility for full projects OR specific areas within a project, and work collaboratively alongside fellow Manufacturing Engineers, Production and Quality Engineers to improve the clarity and robustness of the manufacturing processes, as well a

A leading engineering recruitment consultancy is seeking a Senior Manufacturing Engineer to enhance manufacturing processes and drive continuous improvement. Based in a vibrant area of Stoke-on-Trent, the role involves developing PFMEAs, managing process flows, and collaborating with the engineering

Candidates should hold a degree in Manufacturing or a related engineering discipline and have relevant experience in manufacturing processes. A leading engineering firm in Solihull is seeking a Manufacturing Assembly Process Engineer for a contract position inside IR35. This role involves designing

A global pharmaceutical company in the UK is seeking a Lead Process Engineer to provide technical leadership in process design and engineering solutions. Responsibilities include overseeing project activities, managing procurement processes, and ensuring compliance with industry standards. This posi

We are seeking a Manufacturing & Process Engineer to serve as the technical expert for the newly established Additive Manufacturing Center. Develop and optimize manufacturing processes, post‑processing operations, and inspection methods for additively manufactured components. Collaboration: Work c

The ideal candidate will be a Building Services Design Engineer that has worked on Data Centres who is commutable to Northfleet. Building Services Design Engineer (Data Centres). Are you a Building Services Design Engineer with experience working on data centres who wants to join an award winning co

Rise10 Recruitment are partnering with a specialist engineering consultancy delivering process, automation, and compliance solutions to the pharmaceutical, biotechnology, and advanced life sciences sectors. You’ll play a key role in designing stainless steel process equipment and associated system

It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Electronic Design Engineer, Electrical Design Engineer, Firmware Engineer, Systems Engineer - C, C++, MCU, Electrical Test & Measurement, Analogue Electr