Manufacturing process engineer jobs in PortsmouthCreate job alerts

Manufacturing Engineer \ Havant \ £39,280 - £44,190 \ 6 Month Contract Are you a Manufacturing Engineer with experience in precision engineering, Lean Manufacturing, and continuous improvement Do you enjoy solving complex production challenges while driving quality and process efficiency in a fast-paced engineering environment Workshop Recruitment is supporting a well-established aerospace engineeri... ZIPC1_UKTJ

As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross‑functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management • Develop, implement, and maintain supplier quality management systems and processes., • Establish and communicate supplier quality standards, specifications, and quality plans., • Ensure supplier compliance with contractual, regulatory, and organisational requirements. 1. Supplier Evaluation and Selection • Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance., • Conduct supplier capability assessments and approval activities., • Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 1. Audits & Inspections • Plan and conduct supplier audits and manufacturing process assessments., • Perform product and process inspections including dimensional, trial, final, and FAIR inspections., • Identify, document, and manage non‑conformances, driving effective corrective and preventive actions. 1. Supplier Development • Work in partnership with suppliers to improve quality performance and capability., • Provide technical guidance, quality support, and training where required., • Support continuous improvement initiatives across the supply base. 1. Quality Metrics & Reporting • Monitor, analyse, and report supplier quality performance (e.g. defect rates, on‑time delivery)., • Prepare quality performance reports for internal stakeholders and senior management., • Use data‑driven insight to identify trends and improvement opportunities. 1. Collaboration & Communication • Work closely with Procurement, Engineering, Production, and Operations teams., • Clearly communicate quality expectations, requirements, and feedback to suppliers., • Act as the quality escalation point for supplier‑related issues. 1. Continuous Improvement • Identify opportunities to improve supplier quality processes, systems, and performance., • Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications, • Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification - CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise • Substantial experience in Supplier Quality Engineering or a closely related role, • Proven experience working within the defence sector, • Strong understanding of defence regulatory requirements, including:, • DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge • Quality Management Systems: ISO 9001, AS9100, AS9102, • Supplier auditing, assessments, and corrective action management, • Visual welding inspection, NDT, VT, • PCN Level 1 and/or AWS certification, • Creation and interpretation of ITPs, MITPs, QCPs, • Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications, • Ability to read and interpret 3D models, DWF, STEP files, and PDFs, • Proficiency in quality tools and systems (e.g. Minitab, SAP QM), • Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes • High attention to detail and accuracy, • Strong analytical and problem‑solving capability, • Confident, clear communicator with strong interpersonal and influencing skills, • Assertive, resilient, and adaptable to change, • Highly organised with the ability to manage multiple priorities, • Collaborative team player who actively contributes and coaches others when required, • Commercially aware with an understanding of how quality performance impacts production and customer fulfilment, • Committed to health, safety, environmental compliance, and continuous improvement, • Welcomes and promotes diversity and inclusion Travel Requirements UK‑based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements • Candidates must have an existing right to live and work in the UK, • Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more.

Senior Manufacturing Quality Engineer Portsmouth | Onsite | £50,000 - £60,000, plus benefits An opportunity has arisen for an experienced Manufacturing Quality Engineer to support a complex, high-reliability engineering and production environment within the aerospace and space sector. This is a hands-on position focused on improving manufacturing quality performance within a challenging production area experiencing elevated levels of non-conformance and delivery pressure. The successful candidate will work closely with engineering, manufacturing and quality teams to: • drive root-cause investigations, • improve process discipline, • reduce recurring NCRs, • support production recovery activities, • improve manufacturing flow and yield This role would suit someone with experience within: • Space / satellite manufacturing, • Aerospace or defence production, • High-reliability assembly environments, • NCR / RCCA / 8D processes, • Manufacturing recovery and process improvement The environment requires someone who is: • technically credible, • operationally minded, • calm under pressure, • comfortable influencing stakeholders, • capable of driving improvements within complex engineering organisations Due to the nature of the work, this role is fully onsite in Portsmouth. Please get in touch with me for further information or click apply. Yoh Solutions Ltd, a Day & Zimmermann Company, are specialist recruiters supporting advanced engineering teams across embedded software, wireless communications and electronics.

Are you a Quality Engineer who enjoys solving complex problems, working closely with customers and driving continuous improvement? Do you thrive in regulated manufacturing environments where quality, compliance and precision are critical? If so, this could be an excellent opportunity. We’re recruiting for a well-established advanced manufacturing business operating within a highly regulated engineering sector. This role sits within the Quality team and plays a key part in ensuring products, processes and systems meet the highest industry standards. What’s the role all about? As Quality Engineer, you’ll provide quality assurance support across the business — working with customers, suppliers and internal manufacturing teams to ensure compliance with industry standards and customer requirements. You’ll be responsible for investigating quality issues, leading root cause analysis and supporting product and process improvements across the organisation. Your responsibilities will include: • Reviewing customer quality requirements to ensure correct implementation, • Acting as a key customer interface for quality-related matters, • Investigating internal and external non-conformances, • Leading root cause analysis and corrective actions using 8D methodologies, • Supporting the collection and analysis of quality data within manufacturing, • Participating in customer and third-party audits and managing follow-up actions, • Conducting internal and supplier audits and managing closure of non-conformances, • Supporting supplier evaluation and Approved Supplier List (ASL) management, • Preparing part approval documentation for new or modified products/processes, • Supporting AS9102 First Article Inspection Reports (FAIR), • Analysing product and process performance to drive continuous improvement, • Supporting product development, design reviews and reliability activities, • Supporting development of process capability, control plans and process audits, • Ensuring release documentation (e.g. CoCs and Data Dossiers) is complete prior to shipment This is a varied role combining quality engineering, customer interaction and continuous improvement. What you’ll need To succeed as a Quality Engineer, you’ll bring: • ONC / HNC in Quality or Engineering (or equivalent), • Certified Lead Auditor qualification, • Minimum 2 years’ experience in a Quality role, • Experience within a highly regulated industry such as aerospace, automotive, medical or nuclear, • Strong understanding of problem-solving methodologies (8D, Root Cause Analysis), • Knowledge of quality standards such as ISO9001, AS9100 or NADCAP, • Understanding of engineering drawings, materials and manufacturing processes, • Strong analytical and data interpretation skills Desirable: • CQI qualification (e.g. Diploma in Quality Management), • Knowledge of Lean Manufacturing and Six Sigma tools, • Familiarity with pressure vessel standards such as ASME VIII, PD5500 or PED About you You’re a proactive, analytical and detail-driven engineer who enjoys working across departments to solve problems and improve processes. You’ll be: • A strong communicator who builds relationships with customers and suppliers, • Comfortable working in cross-functional teams, • Methodical in your approach to investigations and analysis, • Self-motivated and capable of working independently, • Focused on delivering quality and continuous improvement Why apply? • Opportunity to work within a highly regulated advanced manufacturing environment, • Exposure to complex engineering products and processes, • Strong cross-functional collaboration with engineering, manufacturing and customers, • Real opportunity to drive improvements and influence quality systems, • Stable, technically challenging environment with strong long-term prospects Interested? If you’re a Quality Engineer looking for a technically challenging role in a highly regulated manufacturing environment, we’d love to hear from you. Apply today or contact us for a confidential discussion. Kingdom People are acting as an Employment Agency in relation to this vacancy.

About a career with Elis Elis is an international multi-service provider, offering textile, hygiene, and facility services solutions. We are a leader in most of the 29 countries in which we operate, employing 52,000 professionals. We have a fantastic opportunity for a committed and motivated Senior Engineer to join a company that invests in training and development to provide their people with the opportunity to flourish and develop their careers! Here at Elis, we recognise that our employees are the company’s greatest asset and our investment in our people reflects this. Elis offers a wide range of assignments and career opportunities via a multitude of diverse job roles and career gateways between functions. This vast field of possibilities gives you the opportunity to achieve your career goals. Senior EngineerEngineering • Portsmouth, • Full-time, • PermanentWhat will make you stand out?, • Interpersonal skills to manage and influence people at all levels., • A minimum of 6 years’ experience working in a manufacturing/process environment., • Skilled in both Electrical and Mechanical trades with knowledge of Engineering disciplines including pneumatics, hydraulics, electrical circuits and able to comprehend the relevant drawings/schematics. To share and support the team in their development by mentoring, recognising strengths/weaknesses and building well rounded Engineers., • You will be self-motivated, able to make decisions and react quickly to the needs of the business., • To record PPM and reactive information into a CMMS system accurately. Maintain PPM relevance by keeping the system up to date with changes. Reporting statistics into group., • A logical approach to fault finding with a high attention to detail., • Able to travel to offsite training facilities and other factories in the group, as and when required.Desirable skills/knowledge, • Experience of managing a team of Engineers is a distinct advantage., • Previous Industrial Laundry experience., • Steam systems and chemical water treatment – BG01 or BOAS accreditation., • Water network and heat recovery systems., • Electronic component fault finding and testing., • BS 7671IET wiring regulations., • Inspection and Testing C&G 2391-52., • Mentoring apprentice’s and/or developing Engineers., • PTW risk assessor and contractor control., • Legionella control, ACOP L8., • Small to medium sized projects, 6 Sigma and Capex., • IOSH managing safely or NEBOSHYour Mission at Elis Key Responsibilities of a Senior Engineer: • You will possess leadership skills to organise an Engineering team, apply strategies and deliver efficient workflow within an industrial laundry processing plant., • Guarantee all activities are carried out in accordance with the Site Health and Safety instructions and the SSG Health and Safety manual, as well as in accordance with relevant engineering standards., • Understand compliance responsibilities and maintain records to an auditable standard., • Carry out, regular and accurate assessment on energy measurables using trend data. Ensure fast response to deviation in working towards our common CSR goals., • Provide knowledge and input into the continuous improvement of plant, machinery, and maintenance activities. Working with your Engineering team to identify areas and find suitable solutions., • To ensure the Company’s disciplines, rules and standards are maintained., • Have technical Engineering experience to order replacement parts and consumables whilst tracking and maintaining budgets., • Report and investigate any incidents, accidents or near misses in accordance with Health and Safety Policies. Ensuring that safe systems of work and best practice procedures are adhered to at all times., • To ensure the Company assets are maintained to achieve maximum efficiency., • Manage contractors on site, ensuring they are working safely and adhering to Health and Safety rules and procedures., • You will maintain excellent communication between Production staff and co-workers and ensure all handover of ongoing activities is carried out every day, sharing all other information and practices as required.What's on offer?, • 29 Days Holiday, • Employee Assistance Programme Are you ready to take your career to the next level? Don't miss out on this exciting opportunity. We are able offer, and encourage career growth, and have national coverage to facilitate ambition. In addition we offer: • 29 days holiday per year • Working with a great team

Manufacturing Quality Engineer Portsmouth Permanent - On-site £50,000 - £60,000 Are you experienced in driving quality improvement within high-reliability aerospace or defence manufacturing environments? Looking for a role where you can take ownership of a struggling production area and make a measurable impact on quality and delivery performance? The Company We are supporting a global engineering consultancy delivering complex programmes across the aerospace, defence, space, and advanced manufacturing sectors. Working in partnership with a key customer in Portsmouth, they are focused on improving manufacturing performance within a regulated environment. Due to continued demand and ongoing improvement projects, they are now looking to appoint a Manufacturing Quality Engineer to support a critical on-site recovery programme. The Role You will be embedded within a high-reliability manufacturing environment, taking responsibility for driving Quality. The role will focus on reducing non-conformances, improving process control, and strengthening quality culture across engineering and production teams. Key Responsibilities • Drive corrective and preventive actions (CAPA), • Support NC management and quality processes, • Carry out root cause analysis (8D, 5 Whys, RCCA), • Ensure compliance with build and quality standards Requirements • Experience as a Quality or Manufacturing Engineer in aerospace, defence, or similar sector, • Experience in high-reliability manufacturing environments, • Strong understanding of quality and compliance standards Contact Dairis Sprudzans Recruitment Consultant | Revorec Keywords Manufacturing Quality Engineer, Quality Engineer, Manufacturing Engineer, Aerospace Engineering, Defence Engineering, Space Industry, Non-Conformance (NC), NC Management, Root Cause Analysis (RCCA), 8D Problem Solving, 5 Whys, Ishikawa, Corrective and Preventive Action (CAPA), Quality Assurance, Process Improvement, Lean Manufacturing, Six Sigma Green Belt, Production Recovery, High Reliability Manufacturing, Satellite Manufacturing, Cleanroom Assembly, Configuration Control, Engineering Compliance, Portsmouth Jobs, Aerospace Jobs UK

Manufacturing Engineer \ Havant \ £39,280 – £44,190 \ 6 Month Contract Are you a Manufacturing Engineer with experience in precision engineering, Lean Manufacturing, and continuous improvement Do you enjoy solving complex production challenges while driving quality and process efficiency in a fast-paced engineering environment Workshop Recruitment is supporting a well-established aerospace engineering business in the search for a Manufacturing Engineer to join their growing team in Havant. This Manufacturing Engineer role will support production and quality improvement activities across the site, helping to optimise manufacturing performance, reduce process variation, and support new product introduction projects. The successful Manufacturing Engineer will work closely with production, suppliers, and customers to deliver robust manufacturing processes that meet industry and customer standards within a highly regulated environment. Key Responsibilities • Develop and improve manufacturing processes using Lean Manufacturing principles, • Support New Product Introduction activities and process validation, • Investigate production and quality issues using structured problem-solving methods, • Analyse manufacturing data and identify continuous improvement opportunities, • Maintain PFMEA documentation, Control Plans, and standard operating procedures, • Participate in quality, process, and EHS audits across the manufacturing cell, • Support the specification and validation of tooling, gauges, and capital equipment, • Work with suppliers and customers to resolve manufacturing and quality concerns Skills & Experience Required • Degree qualified in Mechanical or Electro-Mechanical Engineering, • Previous experience within precision manufacturing or engineering environments, • Strong understanding of Lean Manufacturing and Six Sigma methodologies, • Knowledge of APQP, PFMEA, Control Plans, and root cause analysis tools, • Ability to interpret engineering drawings and geometric tolerances, • Experience using CAD software and advanced Excel functions, • Knowledge of AS9100, ISO14001, or aerospace quality standards beneficial, • Strong communication and cross-functional teamwork skills This Manufacturing Engineer opportunity offers the chance to join a highly technical engineering business with excellent long-term career prospects and involvement in advanced aerospace manufacturing projects.

Our client is a rapidly growing business designing some of the most innovative and interesting applications for the marine industry. If you are a meticulous individual with a passion for working on cutting edge projects, this could be ideal for you. Senior Mechanical Design Engineer Marine applications 12 month contract (Outside IR35) Immediate start We are seeking a skilled and detail-oriented Senior Mechanical Design Engineer join our engineering team. In this role, you will be responsible developing advanced maritime capabilities. Responsibilities will include: • Accountability for full systems from inception to delivery; driving function, quality, and performance, • Conducting detailed analysis of design requirements, specifications, and project objectives to develop innovative mechanical design solutions, • Utilisation of CAD software and other design tools to create detailed 2D drawings and 3D models of mechanical components, ensuring accuracy, functionality, and compliance with industry standards and regulations., • Substantiate designs using analytical methods, FEA software, and other simulation tools to validate the integrity, performance, and safety of mechanical designs in the maritime environment., • Collaboration with cross-functional teams, including electrical engineers, naval architects, and control systems engineers, to ensure seamless integration and compatibility of mechanical designs with other system elements., • Conduct material selection and evaluation, considering factors such as mechanical properties, corrosion resistance, weight optimisation, and cost-effectiveness, for the development of maritime technology solutions., • Develop and maintain comprehensive documentation, including design specifications, engineering drawings, and technical reports, ensuring accurate and up-to-date records throughout the design and development process., • Commit to learning fast and learning by doing, through the use of prototypes, simulation and other testing and validation. Qualifications and Experience: • Strong problem-solving skills with the ability to identify, analyse, and resolve complex design challenges., • Courageous and innovative mindset, unafraid to challenge conventional thinking and propose novel ideas., • Proficiency in sketching and the ability to communicate design concepts visually., • Expertise in 3D modelling software, such as Inventor or SolidWorks., • In-depth knowledge of mechanical engineering principles, and manufacturing processes relevant to maritime technology, enabling a confident and justified compromise of performance and cost., • Strong knowledge of material selection and combination for use in the marine environment, extending to established and novel corrosion mitigation technologies and methodologies., • Confident in design justification through market research, hand calculation, simulation, and physical testing., • Familiarity with relevant regulatory requirements and industry standards for marine systems and equipment. In particular, experience designing for class approval of machinery and mechanical systems against Lloyd’s or DNV-GL is beneficial., • Excellent communication skills, both verbal and written, to effectively collaborate with cross-functional teams and present design proposals., • Strong attention to detail and the ability to create accurate technical drawings and models., • Experience with prototyping, testing, and iterative design processes., • A degree in Mechanical Engineering or a related field. Advanced degrees or specialised certifications are a plus., • Experience with pneumatic systems and the design of such systems, • A deep understanding of complex mechanical linkages and systems, • Experience with marine or mobile robotics projects. Candidates must be able to obtain BPSS clearance and should have the right to work in the UK.

Are you an experienced Manufacturing Engineer looking to step into a senior-level role within a fast-paced aerospace manufacturing environment? Do you enjoy leading improvement projects, solving complex manufacturing challenges and driving operational performance? Were supporting a specialist aerospace manufacturing business who are looking to recruit a Senior Manufacturing Engineer to join their engineering team. Whats the role all about? As a Senior Manufacturing Engineer, youll play a key role in driving manufacturing excellence across production operations. Youll be responsible for supporting manufacturing processes, improving efficiency, reducing waste and leading continuous improvement initiatives within a highly regulated engineering environment. This role will also involve mentoring junior engineers, supporting New Product Introduction activities and working closely with Production, Quality and Supply Chain teams to optimise manufacturing performance. Key responsibilities • Lead and support continuous improvement projects across manufacturing operations, • Develop and optimise manufacturing processes to improve efficiency, quality and output, • Support New Product Introduction (NPI) and production readiness activities, • Investigate production and process issues, identifying root ca...

An established and growing technical business operating within infrastructure and specialist industrial products is seeking a hands-on Product Development / Applications Engineer to join its technical team. This is not a desk-based engineering role. The successful candidate will spend significant time working with products, equipment, customers and suppliers in real-world environments, supporting innovation and helping clients achieve optimum performance from specialist systems and technologies. Key responsibilities: Carry out practical testing, evaluation and reporting Support product demonstrations and customer presentations Deliver technical training and support Assist with on-site trials and product implementation Work closely with suppliers and manufacturing partners Identify opportunities for product and process improvements Support ongoing product development projectsWe are interested in candidates with experience in one or more of the following: Industrial coatings or paint systems Spray technologies or specialist equipment Construction chemicals Resin-based products Repair or reinstatement systems Industrial materials or related applicationsThe ideal candidate will have: Relevant engineering or technical qualifications Experience in industrial, manufacturing, construction or contracting environments Strong communication and presentation skills A practical, hands-on approach Good organisational and reporting skill...

An established and growing technical business operating within infrastructure and specialist industrial products is seeking a hands-on Product Development / Applications Engineer to join its technical team. This is not a desk-based engineering role. The successful candidate will spend significant time working with products, equipment, customers and suppliers in real-world environments, supporting innovation and helping clients achieve optimum performance from specialist systems and technologies. Key responsibilities: • Carry out practical testing, evaluation and reporting, • Support product demonstrations and customer presentations, • Deliver technical training and support, • Assist with on-site trials and product implementation, • Work closely with suppliers and manufacturing partners, • Identify opportunities for product and process improvements, • Support ongoing product development projectsWe are interested in candidates with experience in one or more of the following:, • Industrial coatings or paint systems, • Spray technologies or specialist equipment, • Construction chemicals, • Resin-based products, • Repair or reinstatement systems, • Industrial materials or related applicationsThe ideal candidate will have:, • Relevant engineering or technical qualifications, • Experience in industrial, manufacturing, constr...

Electrical Design Engineer – Portsmouth/semi remote – LM1245d Salary / benefits: Competitive, plus benefits, Job Term: Permanent / Full Time / Onsite Job Outline: Now is an exciting time to join a world leading supplier of Laboratory Equipment as their Lead Electrical Design Engineer/Project Manager at their Portsmouth facility. As Lead Electrical / Project Engineer you will assume responsibility for the electrical design and also manage and lead the product development projects. You will take responsibility for projects from the initial customer meetings, through the electrical design process, and on to manufacturing, project completion and final delivery to customers. Within the role, you will create bespoke electrical designs using SolidWorks Electrical, as well as generate and update BOM’s and other design and manufacturing documentation as required. On a daily basis you will collaborate with other designers and departments to clarify specifications and translate technical requirements into structured modular designs. As the lead Project Manager, you will work closely with all key stakeholders to manage the full project life cycle, ensuring delivery on time, in budget and on cost. Within the role, you will create accurate electrical designs within specified timelines, ensuring compliance with company standards and relevant market standards (e.g., EN standards). You will also provide technical su...

Are you an experienced Manufacturing Engineer with a passion for continuous improvement, process optimisation and problem solving? Do you enjoy working in a fast-paced engineering environment where you can make a real impact on manufacturing performance and efficiency? Were supporting a specialist aerospace manufacturing business who are looking to recruit a Manufacturing Engineer to join their engineering team. Whats the role all about? As a Manufacturing Engineer, youll support manufacturing operations by developing, improving and maintaining robust production processes across the business. Youll work closely with Production, Quality and Engineering teams to improve efficiency, reduce waste and support the successful delivery of high-quality products within a regulated manufacturing environment. This is a varied role offering exposure to process improvement, root cause analysis, production support and New Product Introduction activities. Key responsibilities • Support and improve manufacturing processes across production operations, • Drive continuous improvement activities to improve efficiency, quality and output, • Support production teams with technical and process engineering expertise, • Investigate manufacturing and quality issues, identifying root causes and implementing corrective actions, • Support New Pro...

Quality Engineer (SQA) Portsmouth, Hampshire £35,000 – £42,000 (Negotiable based on Experience) Full Time, Permanent The Opportunity We’re recruiting for a Quality Project Engineer & SQA to join a precision engineering environment working on high-spec, tight-tolerance components. This is a fantastic opportunity for someone with a strong quality background in CNC/manufacturing who wants to play a key role in driving product quality, supplier performance, and continuous improvement across the business. The Role Reporting to the Quality Manager, you’ll be responsible for ensuring products meet exacting standards, often at micron-level tolerances, while supporting process improvements and supplier quality performance. You’ll work closely with production, engineering, and suppliers to drive quality from design through to final inspection. Key Responsibilities Quality & Inspection Develop quality plans, inspection methods, and work instructions Perform and oversee first article, in-process, and final inspections Utilise CMM and advanced metrology equipment to validate components Ensure compliance with ISO9001 and AS9100 standardsNon-Conformance & Improvement Manage non-conformances (NCRs) and lead root cause analysis (8D, 5 Whys) Drive CAPA activities to improve processes and reduce defects Lead continuous improvement initiatives to improve yield and reduce scrapSupplier...

Our client, a prominent player in the aerospace sector, is currently seeking a Manufacturing Engineer to join their team in Havant on an initial 6 month fixed-term contract. The primary function of this role is to support plant leadership in achieving business and financial goals by developing and maintaining robust manufacturing and quality processes and leading continuous improvement initiatives across the organisation. The role is pivotal in executing the organisation's strategic plan in line with regulations, industry standards, and customer requirements. Key Responsibilities: Act as the liaison between the Manufacturing Cell and other groups including the NPI team, customers, and suppliers for manufacturing and quality engineering issues throughout the product lifecycle. Participate in New Product Introduction projects, ensuring internal and external product and process requirements are met. Develop and maintain robust, cost-efficient manufacturing processes consistent with Lean Manufacturing methodologies. Utilise appropriate statistical methodologies to evaluate and reduce product, people, and process variation, maintaining effective PFMEAs, Control Plans, and SOPs through systematic reviews. Measure, monitor, and analyse customer and productivity metrics, leading teams to continuously improve performance and reporting data and improvement plans to site leadership and customers. Solve technical process problems utilising str...

Job Description: Extrusion Line Engineer Location: Waterlooville Pay: £20.00 per hour Job Type: Full-time Company: V3 Recruitment (working on behalf of our client) Job Description V3 Recruitment are currently working on behalf of a well-established manufacturing company based in Waterlooville who are looking to recruit an experienced Extrusion Line Engineer to join their team. This is a hands-on engineering role where you will be responsible for the setup, operation, optimisation, and performance of extrusion lines to ensure safe, efficient, and high-quality production. The role plays a key part in maintaining stable processes, reducing downtime, and ensuring consistent output and product quality. Key Responsibilities Setting up, starting, adjusting, and shutting down extrusion lines Installing and aligning extrusion dies, tooling, calibrators, and downstream equipment Optimising temperatures, screw speed, pressure, line speed, and cooling systems Completing first-off checks and documenting process settings Troubleshooting production issues such as dimensional variation, surface defects, and material inconsistencies Reducing scrap, improving line performance, and maintaining repeatable processes Supporting preventative maintenance and reporting breakdowns when required Working closely with Toolroom and Engineering teams on tooling improvements Ensuring products meet qu...

Quality Engineer - Manufacturing Portsmouth Salary £42,000 - £47,000 - plus 33 days holiday, pension, life assurance, employee assistance programme, wellbeing support, and benefits scheme Please note that the working pattern is 8.00am - 4.00pm About the Job Responsible for developing processes to ensure incoming materials meet required quality standards. Responsible for identifying and raising quality issues and for speedily resolving them to ensure zero impact to the customer. Supporting new product introductions to ensure the robustness of product builds. Work in a team environment to develop and implement best practices that emphasise defect prevention, reduction in variation and waste and provide for continuous improvements in meeting all customer requirements. Review and manage the customer specific requirements in specifications, CAD data and drawings, ensuring they are correctly applied and integrated into the manufacturing processes via core tools such as PFMEA and Control Plans. Co-ordinating measurement activity for customer submissions such as ISIR, Capability Studies and MSA. Supporting pre-production trials to validate a production process with a high quality output Customer facing on quality issues, measurement reports and concessions QMS interaction (NCR, concessions, change management, audit etc.) Main Quality contact for select customers Principle Accountabilities Ac...

Manufacturing Quality Engineer Portsmouth Permanent - On-site £50,000 - £60,000 Are you experienced in driving quality improvement within high-reliability aerospace or defence manufacturing environments? Looking for a role where you can take ownership of a struggling production area and make a measurable impact on quality and delivery performance? The Company We are supporting a global engineering consultancy delivering complex programmes across the aerospace, defence, space, and advanced manufacturing sectors. Working in partnership with a key customer in Portsmouth, they are focused on improving manufacturing performance within a regulated environment. Due to continued demand and ongoing improvement projects, they are now looking to appoint a Manufacturing Quality Engineer to support a critical on-site recovery programme. The Role You will be embedded within a high-reliability manufacturing environment, taking responsibility for driving Quality. The role will focus on reducing non-conformances, improving process control, and strengthening quality culture across engineering and production teams. Key Responsibilities Drive corrective and preventive actions (CAPA) Support NC management and quality processes Carry out root cause analysis (8D, 5 Whys, RCCA) Ensure compliance with build and quality standardsRequirements Experience as a Quality or Manufacturing Engineer in aerospace, defence, or similar se...

Our engineering and manufacturing clients based close to Havant have an exciting opportunity for a Quality Engineer to join their growing team. Responsibilities To carry out all inspections such as first off, last off, incoming, and outgoing goods, of detailed parts, assemblies and documentation in a timely and efficient manner, using mechanical or electronic measuring equipment. Responsible for verifying components meet specification and customer requirements using detailed drawings, the customer’s condition of supply, company procedures and layouts. Final release of parts to customer including raising and signing certificates of conformity. Action and complete First and Last Article Inspection reports as per customer requirements. Responsible for the non – conformance process. Interface with customers, suppliers and personnel on quality requirements and non-conformances. This includes reporting all component and documentation non-conformances using the appropriate documents and forms to the relevant Team Leader and Supervisor. Non-Conformance control reports including Root cause analysis, correction, corrective, and verification of completed actions. Carry out internal audits against the relevant standard/ certification held. Good understanding of documentation control and management in accordance with AS9100 Represent quality at the Tier meetings to provide feedback and suppor...

Junior Design Engineer Havant, Hampshire £28,000 – £30,000 We are looking for a motivated Junior Design Engineer to join a busy and fast-paced design team in Havant. This is an excellent opportunity for someone with a strong interest in mechanical design and manufacturing to develop their skills on innovative marine products from concept through to production. The role will suit a hands-on engineer who is eager to learn, comfortable working across design, testing, and problem-solving activities, and keen to build experience in a dynamic engineering environment. You will support the delivery of mechanically sound products, working closely with the wider project, quality, and procurement teams. Key Responsibilities Support mechanical product development from design concept through to production release. Create and develop 3D parts and assemblies using CAD modelling techniques. Work with the project manager to help deliver projects on time and within cost. Use the Engineering Change Note process to manage design releases and modifications. Develop and execute test plans to validate designs and analyse results. Support prototype and first-off testing, writing reports and capturing findings. Assist the quality team with investigations and help identify improvements to design and assembly. Liaise with procurement to ensure parts and items meet specification, providing technical support where needed.What We&...

Our engineering and manufacturing clients based close to Havant have an exciting opportunity for a Quality Engineer to join their growing team. Responsibilities • To carry out all inspections such as first off, last off, incoming, and outgoing goods, of detailed parts, assemblies and documentation in a timely and efficient manner, using mechanical or electronic measuring equipment., • Responsible for verifying components meet specification and customer requirements using detailed drawings, the customers condition of supply, company procedures and layouts. Final release of parts to customer including raising and signing certificates of conformity., • Action and complete First and Last Article Inspection reports as per customer requirements., • Responsible for the non conformance process. Interface with customers, suppliers and personnel on quality requirements and non-conformances. This includes reporting all component and documentation non-conformances using the appropriate documents and forms to the relevant Team Leader and Supervisor., • Non-Conformance control reports including Root cause analysis, correction, corrective, and verification of completed actions.

The Process Engineer in Portsmouth, Hampshire will report into the Process Engineering Team Leader and will be responsible for the development, maintenance and improvement of equipment and processes associated with manufacturing at the facility in Portsmouth, as well as supporting new product introd

Currently located in Titchfield, Hampshire, Eaton's Aerospace business stands as a global leader in aerospace fuel systems. Our site is undergoing a significant and exciting transformation as we relocate to a newly constructed facility in Daedalus. This state-of-the-art site will serve as the Centre of Excellence for aerospace manufacturing across Europe, marking a new era of innovation and excellence. We pride ourselves as a premier supplier of fully integrated fuel systems for fixed and rotary-wing aircraft. We boast extensive fuel and air system test facilities, facilitating comprehensive testing across a range of conditions with various fuel types We are seeking a Manufacturing Engineer to work within the Manufacturing Engineering Team. Supporting all operations areas of the Titchfield site. Providing day to day support to the production areas in achieving production schedule, product quality, product cost, and employee safety goals. What youll do: We are seeking a highly skilled Transitions/Supply Chain - Mechanical Manufacturing Engineer to lead the introduction of Sub-Contract operations within the current manufacturing processes as well as supporting the Transitions buying team when moving product to a new supplier. You will collaborate closely with operations, supply chain, design engineering, and quality to deliver smooth process transitions that meet programme schedule, and performance goals. Key Responsibilities Supply Chain Introduction & Industrialisation Define production/sub-con process flow and routings. Support supply chain with technical queries supporting the need for permits/concessions/design updates. Partner with Goods Receiving and Stores via MRB meetings. Evaluate and execute stock salvage. Generate rework process routings driven by delivery requirements. Manufacturing Engineering Interpret engineering drawings and specifications to ensure accurate and efficient production for aerospace components and assemblies. Highlight and review appropriate tooling, fixturing and equipment used that may be beneficial to supplier. Support MRB (Material Review Board) process, reviewing, investigating and salvaging non-conforming supplied product. Support suppliers root cause analysis and implementation of corrective actions using structured problem solving (8D, 5 Why, DMAIC) Specify and validate live Permits, Concessions, SOPs and specifications meet drawing requirements. Ensure manufacturing processes comply with aerospace standards (AS9100, NADCAP, internal specs). Support FAIR activities, and production readiness reviews. Cross Functional Collaboration Coordinate with supply chain and suppliers to ensure manufacturability and process capability. Partner with operations to ensure smooth handover from in house manufacture to sub-contract supply ensuring delivery requirements are met. Work closely with Quality to ensure non-compliant product follows correct MRB procedures and is flowed back correctly to the supply chain. Collaborate with Design Engineering and Manufacturing when conflicts occur with design intent and drawing requirements. Qualifications: Bachelors degree in Mechanical Engineering, Manufacturing Engineering, Aerospace Engineering, or equivalent. Experience in aerospace or a similarly regulated mechanical manufacturing environment. Skills: Demonstrated experience and involvement with Sub-Contractors. Strong working knowledge of manufacturing processes such as: o Assembly & integration o Fuel systems o Special processes (heat treatment, surface finishing, part marking, etc.) Working knowledge of materials planning systems (MRP/ERP). Experience in Advanced Product Quality Planning (APQP) related activities, Risk Assessments, FMEAs, SPC, Continuous Improvement etc. Experience with automation, digital manufacturing, or Industry 4.0 technologies (e.g. AutoCAD, SOLIDWORKS). Lean Six Sigma Green Belt or higher. Strong problem solving and analytical skills. Excellent communication and cross functional collaboration. Ability to manage multiple projects and work in fast paced environments. Detail oriented with a passion for process excellence. What we offer: Competitive compensation and benefits package Challenging projects in dynamic collaborative team Great company benefits We make your aspirations matter Eaton encourages internal promotion, whenever possible We make your growth matter - We invest in our employees for the long term not just with salary and benefits, but with ongoing learning and development opportunities made available through Eaton University We make your contributions matter - reliability, safety, efficiency, and sustainability are at the core of our dedication to improving peoples lives and the through power management technologies We make your wellbeing matter We put your health and safety first. Wellness at Eaton is more than a program, its about changing the environment by offering the right tools to help empower employees to make that happen The successful applicant will be in contact with US ITAR controlled technology, goods and information. As a condition of employment, employees with access to US ITAR controlled technology and goods may be required to undergo an additional screening process as part of the recruitment process. We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law. TPBN1_UKTJ

Introduction Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth. What you will be part of Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters. Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations. The Role: This role is part of our Saab Seaeye Business Unit in Fareham. The role will aim to provide Production Engineering support for the final assembly and testing of remotely operated vehicles and systems, with a focus on clear, standardised process documentation. In addition, ensure appropriate production processes, equipment, and facilities are in place to safely and consistently manufacture products to meet cost, time, and quality requirements. Key Responsibilities: Conduct an analysis of current SOPs in the integration department to identify gaps, outdated procedures and areas for improvement. Standardise process and procedures across the department to ensure consistency, reduce variation, and enhance cross-departmental collaboration. Own, document and train others on manufacturing process and standards. Attend SQCDP meetings and support a hands-on problem solving approach with Area Team Leader and Quality Engineering to achieve OTD and right first time objectives. Assess compliance and adhere to safety/quality standards. Providing technical support for production and production control. Developing, optimising and implementing factory floor layouts/production cells. Analyse data to drive continuous improvement of processes and workflows. Skills and Experience: Multi-disciplined senior engineer with an electrical bias and experience in test, pre-commissioning, and fault finding. Background in low-volume, one-off engineered products and systems; ideal for Production, Project, or Delivery Engineers. Strong mechanical, electrical, and systems engineering knowledge, especially for complex assemblies like ROVs. Troubleshooting: Technical problem-solving skills to diagnose and resolve production issues. Minimum qualifications HNC/HND, Bachelor's degree or relevant experience preferably in Electrical, Mechanical, Engineering, Industrial Engineering, Manufacturing Engineering, or a related field. Hands-on production support experience in assembly, testing, and quality control. Relevant certifications (e.g., Lean Manufacturing, Six Sigma Green Belt) are a plus; familiarity with hydraulics is also beneficial. Support and training is available for Working with Electrics, High Voltages, and Hydraulics. By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview. TPBN1_UKTJ

Infinity Employment are currently seeking a skilled Maintenance Engineer with strong mechanical and electrical expertise for an industry leading specialist, manufacturing precision components for aviation, tooling, automotive, F1 and defence industries. This role requires someone with strong maintenance engineering experience and the ability to cover a broad remit of maintenance activities including mechanical and electrical biases. The successful candidate will need to work on their own initiative creating structures and processes. This is a new role and so offers the opportunity for the ideal candidate to make it their own. Some experience with CNC machines desirable (Fanuc, Heidenhain) and experience using Microsoft Office products desired (Excel, Word, Outlook) The primary purpose of this role is to ensure the reliable, safe, and efficient operation of all production equipment, CNC machinery, and facility infrastructure. The Maintenance Engineer supports continuous production by conducting preventive and reactive maintenance, troubleshooting machine faults, and implementing improvements that minimise downtime and support precision manufacturing standards. Salary: £35,000 - £50,000 Hours: 40-hour week (Days ) Key Responsibilities: Implement and deliver planned preventative maintenance schedule. Diagnose faults to minimize unplanned downtime. Carry out corrective maintenance, part replacement, and adjustments to maintain precision and repeatability. Monitor machine performance, patterns, breakdown trends and recommend reliability improvements. Support process optimization projects, machine upgrades, and tooling improvements Work with production to identify root causes of recurring issues and implement corrective actions. Maintain accurate maintenance records, service logs, calibration certificates (where applicable) and spare parts tracking. Ensure all maintenance activities comply with ISO standards (in line with site certifications) Support audits by providing maintenance history and compliance documentation. Managing contractors on site ensuring that RAMs are in place. Manage the installation of new equipment. Carry out weekly fire alarm checks. Apply safe working practices and promote a proactive maintenance, safety and environmental culture by participating in the health and safety committee and undertaking actions that are identified (within the Maintenance Engineer remit) to ensure the site remains a safe place to work. Be the main point of contact for activity undertaken by external contractors required to support the maintenance of the site that falls outside of the roles remit Skills & Experience Experience as a Maintenance Engineer with precision engineering, machining, or similar manufacturing environment. Strong Mechanical and electrical skills – ability to read engineering drawings and schematics. Experience with CNC machines is desirable, particularly Fanuc and Heidenhain controls Ability to fault-find using schematics and technical documentation Competent user of Microsoft Office applications, including Excel, Word, and Outlook Strong problem-solving skills and the ability to work independently or as part of a team Experience of working in a standalone role is preferable, but a candidate with extensive experience working in a team will be considered. Experience in TPM, lean manufacturing or continuous improvement initiatives. Personal attributes: Health and safety focussed with good housekeeping Practical hands-on problem solver with strong attention to detail Proactive, reliable, and able to work in a fast-paced SME environment Good communicator who can work cross-functionally with operators, engineers, and management Committed to maintaining high standards of precision, safety, and machine availability. Positive attitude Benefits: Company pension - company contribution at 5% Health cash plan system Employee assistance program Holidays increase with Service from 5 complete years * Social activities, e.g. Christmas party

Are you an experienced CNC Turner looking to join a high-performing precision engineering team? We are seeking a skilled and motivated CNC Turner to programme, set, and operate CNC turning machines within a modern and fast-paced machine shop environment. You will play a key role in delivering high-quality precision components across a diverse range of engineering projects. This is an excellent opportunity for a proactive engineer who takes pride in their workmanship and thrives in a continuous improvement culture. The Opportunity Working alongside a team of experienced engineers and CNC technicians, you will be responsible for producing precision components to the highest quality standards while ensuring delivery schedules are achieved. You will report directly to the Turning Team Leader and Production Manager and contribute to ongoing process and tooling improvements across multiple programmes. Key Responsibilities Programming, setting, and operating CNC turning machines Working with Mazak and Okuma controls (Mazatrol / Fanuc) Reading and interpreting detailed engineering drawings Understanding and analysing CNC programs and machine movements Selecting appropriate tooling and cutting inserts for optimal performance Liaising with tooling suppliers when required Conducting in-process inspection using hand measuring equipment Maintaining strict in-process quality control standards Troubleshooting machining and programming issues Supporting machining process improvements and fixture/tooling development Ensuring production targets and delivery deadlines are consistently met What We’re Looking For Essential: Minimum 5 years’ experience in a CNC turning role Strong experience programming CNC machinery Ability to work independently and use own initiative Proven problem-solving ability in a machining environment Strong understanding of precision engineering drawings High attention to detail and quality standards Good communication and organisational skills Qualifications: - GCSE / O-Level (or equivalent) Essential Skills & Experience: - Proven ability to program CNC machinery independently - Strong organisational skills with the ability to prioritise workload effectively - Logical, pragmatic approach to problem-solving within a machining environment - Continuous improvement mindset — able to identify and act on opportunities to improve processes, performance, and efficiency - Clear and effective communication skills - Strong time management with the ability to meet production deadlines - Ability to work collaboratively with quality and production teams to optimise performance - Confident working from both verbal and written engineering instructions - Commitment to high housekeeping standards and 5S principles - Competent IT skills, including Microsoft Office Desirable (Advantageous but Not Essential) Experience programming Mazak (Mazatrol) controls Experience programming Okuma (Fanuc) controls Knowledge of Lean Manufacturing principles * Experience using structured problem-solving methods such as 8D

Portsmouth £42,000 - £47,000 - plus 33 days holiday, pension, life assurance, employee assistance programme, wellbeing support, and benefits scheme Please note that the working pattern is 8.00am - 4.00pm About the Role As part of your key responsibilities youll: Develop processes to ensure incoming materials meet required quality standards Identify and raise quality issues to ensure zero impact to the customer Support new product introductions to ensure the robustness of product builds Work in a team environment to develop and implement best practices that emphasise defect prevention, reduction in variation and waste, and provide continuous improvements for products, processes, and resources Review and manage the customer specific requirements in specifications, CAD data and drawings, ensuring they are correctly applied and integrated into the manufacturing processes via core tools such as PFMEA and Control Plans Co-ordinate measurement activity for customer submissions such as ISIR, Capability Studies and MSA Support pre-production trials to validate a production process with a high quality output QMS interaction (NCR, concessions, change management, audit etc.) Ensuring problem solving tasks are completed to IATF & AS requirements, ensuring efficient and robust closure and employing Unipart Way problem solving methodologies Ensuring Process and Product audits are being completed and acted upon in line with the annual audit plan. About You Wed love you to have the following skills and experience, but please apply if you think youd be able to perform well in this role! Experience in quality engineering within the automotive or manufacturing sector with tools such as PPAP, APQP, FMEA, SPC, MSA, and with QMS Familiarity with IATF 16949 and ISO 9001 quality standards, AS9100 experience Proven track record in managing supplier quality issues and customer complaints - 8D, 5 Whys, Ishikawa diagrams Experience with auditing (internal and external), root cause analysis, and corrective/preventive action processes Ability to read and interpret technical drawings (GD&T knowledge preferred) Competency in statistical analysis and use of statistical software (e.g., Minitab, JMP) Understanding of metrology and hands-on experience with measurement tools (CMM, calipers, micrometers, etc.) Excellent communication and interpersonal skills to interact with teams, suppliers, and customers Proactive, self-motivated, resilient, adaptable, and capable of working independently and as part of a team in a fast-paced, high-pressure environment About Unipart We are a supply chain performance improvement partner. We Design, Make, Move, and Improve components in our customers supply chains, keeping their operations and assets moving and working better, for longer. Through our commitment to continuously driving operational efficiencies, we improve performance - saving time, cost, and carbon. Our ambition is to be the driving force behind efficient, resilient, and sustainable supply chains. Equality, Diversity, and Inclusion We believe that a great workplace is one where you can bring your whole self to work. Our recruitment process is designed to be accessible, inclusive, and based entirely on merit. We define merit through a combination of technical skills and the core behaviours that help our people thrive at Unipart. We welcome applications from everyone, regardless of background or circumstances. We are committed to a policy of equal opportunity that exceeds our statutory obligations under the Equality Act 2010 and subsequent legislation. Whether its your age, disability, neurodiversity, gender identity, family status, or any other characteristic that makes you you - it is your talent and potential that we value most. Adjustments for you: We want you to perform at your best. If you require any reasonable adjustments or have specific accessibility needs at any stage of the application or interview process, please let us know. We are here to support you. You may have experience in the following: Quality Engineer, Manufacturing Quality Engineer, Supplier Quality Engineer, Senior Quality Engineer, Automotive Quality Engineer, Production Quality Engineer, Quality Assurance Engineer, Process Quality Engineer, Continuous Improvement Engineer, Quality Specialist. REF-228 390 TPBN1_UKTJ

An established and growing technical business operating within infrastructure and specialist industrial products is seeking a hands-on Product Development / Applications Engineer to join its technical team. This is not a desk-based engineering role. The successful candidate will spend significant time working with products, equipment, customers and suppliers in real-world environments, supporting innovation and helping clients achieve optimum performance from specialist systems and technologies. Key responsibilities: Carry out practical testing, evaluation and reporting Support product demonstrations and customer presentations Deliver technical training and support Assist with on-site trials and product implementation Work closely with suppliers and manufacturing partners Identify opportunities for product and process improvements Support ongoing product development projects We are interested in candidates with experience in one or more of the following: Industrial coatings or paint systems Spray technologies or specialist equipment Construction chemicals Resin-based products Repair or reinstatement systems Industrial materials or related applications The ideal candidate will have: Relevant engineering or technical qualifications Experience in industrial, manufacturing, construction or contracting environments Strong communication and presentation skills A practical, hands-on approach Good organisational and reporting skills Full right to work in the UK and ability to travel within the UK and Europe This role would suit an energetic engineer who enjoys problem solving, working directly with customers and being involved in practical product development rather than sitting behind a desk. Execllent benefits. TPBN1_UKTJ

Junior Development Engineer (Thermo) Location: Fareham Industry: Thermal Engineering / Product Development Type: Full‑time, Permanent, Hybrid The Junior Development Engineer (thermo) role is an entry‑level engineering position designed to strengthen our Global Technology Team. This is an excellent opportunity for someone early in their career who wants to develop deep technical expertise in heat exchanger technology, thermodynamics, and product development. You don't need to be an expert yet, just someone with the right foundation, curiosity, and mindset. What We're Looking For We are seeking someone with a degree (or equivalent) in: Mechanical Engineering Thermal Engineering Chemical Engineering Or a similar engineering discipline You should have a solid understanding of thermodynamics and fluid dynamics, enough to analyse and support the development of heat exchanger products. This role suits someone who enjoys switching between desk‑based analysis and hands‑on practical work. What You'll Be Doing You will support the design, development, and improvement of heat exchanger products across global teams. Typical tasks include: Running engineering calculations and simulations Supporting laboratory testing and experimental work Helping build, refine, and evaluate prototypes Writing clear and structured technical reports Tracking engineering changes and documenting work properly Delivering tasks in a methodical, process‑driven way Working to defined project timelines Supporting thermodynamic and performance analysis This is a role for someone who likes order, structure, and process, and who takes pride in doing things properly. Who You'll Work With This role involves daily collaboration with colleagues across the world, including: Global Technology Teams Product Managers Manufacturing Sites Customers and external partners Strong communication skills are essential. You should be comfortable explaining technical ideas clearly, working with different cultures, and speaking with colleagues or customers abroad. What We Value We're not looking for deep experience, we're looking for the right person: Keen to develop and grow Open to feedback and learning Interested in heat exchanger technology Comfortable with both practical and analytical work Willing to travel occasionally Curious, methodical, and proactive This role offers strong long‑term development potential, with opportunities to grow into advanced product engineering, thermodynamic analysis, or global project roles. Why This Role Matters You will play a key part in: Supporting new product development Improving existing product performance Contributing to global engineering projects Helping shape the next generation of heat exchanger technology This is a rare opportunity to join a global engineering organisation at an early stage in your career and build a strong technical foundation. Should you require any support or assistance, please contact your local Gi Group office. Gi Group Holdings Recruitment Limited are proud founding members of Menopause in business, corperate members for Neurodiversity in business, Disability Confident committed members, Gold status for the Armed Forces Covenant, Bronze trail blazers for Racial Equality matters and Age Freindly Employer pledge members. Gi Group Holdings Recruitment Limited group of companies includes Gi Recruitment Limited, Draefern Limited, Gi Group Recruitment Ltd, INTOO (UK) Limited, Marks Sattin (UK) Limited, TACK TMI UK Limited, Grafton Professional Staffing Limited, Encore Personnel Services, Gi Group Ireland Limited and Kelly Services (UK) Ltd. Gi Group Ireland Limited are acting as an Employment Agency in relation to this role. We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Gi Group Privacy Statement. To view a copy and to help you understand how we collect, use and process your personal data please visit the Privacy page on our Gi Group website

Description As a Supplier Quality Engineer, you will be responsible for assuring the quality of products and services supplied by external suppliers, ensuring full compliance with organisational, customer, and regulatory requirements. You will drive supplier quality performance through effective quality management processes, audits, supplier development activities, and cross-functional collaboration. This is a pivotal role in protecting the integrity of the supply chain and ensuring that end products consistently meet the high standards expected by customers and stakeholders, particularly within a regulated defence environment. The role requires significant travel across the UK (approximately 60%). While it reports to the Operational Quality Manager based at the Portsmouth site, the position could also be suited to an individual located in the North of the UK to better support travel requirements. Key Responsibilities 1. Supplier Quality Management Develop, implement, and maintain supplier quality management systems and processes. Establish and communicate supplier quality standards, specifications, and quality plans. Ensure supplier compliance with contractual, regulatory, and organisational requirements. 2. Supplier Evaluation and Selection Evaluate and support the selection of suppliers based on quality, cost, delivery, and service performance. Conduct supplier capability assessments and approval activities. Manage material quality for Stainless Steel, Aluminium, and Carbon Steel supply chains. 3. Audits & Inspections Plan and conduct supplier audits and manufacturing process assessments. Perform product and process inspections including dimensional, trial, final, and FAIR inspections. Identify, document, and manage non-conformances, driving effective corrective and preventive actions. 4. Supplier Development Work in partnership with suppliers to improve quality performance and capability. Provide technical guidance, quality support, and training where required. Support continuous improvement initiatives across the supply base. 5. Quality Metrics & Reporting Monitor, analyse, and report supplier quality performance (e.g. defect rates, on-time delivery). Prepare quality performance reports for internal stakeholders and senior management. Use data-driven insight to identify trends and improvement opportunities. 6. Collaboration & Communication Work closely with Procurement, Engineering, Production, and Operations teams. Clearly communicate quality expectations, requirements, and feedback to suppliers. Act as the quality escalation point for supplier-related issues. 7. Continuous Improvement Identify opportunities to improve supplier quality processes, systems, and performance. Stay current with industry best practice, standards, and regulatory developments. Education & Qualifications Degree in Engineering, Quality Management, or a related discipline or equivalent apprenticeship qualification - CSWIP 3.0 / 3.1 / 3.2 to BS EN ISO 17637 Skills, Knowledge and Expertise Substantial experience in Supplier Quality Engineering or a closely related role Proven experience working within the defence sector Strong understanding of defence regulatory requirements, including: DEFSTAN, DEFCON, QASOR Technical Skills & Knowledge Quality Management Systems: ISO 9001, AS9100, AS9102 Supplier auditing, assessments, and corrective action management Visual welding inspection, NDT, VT PCN Level 1 and/or AWS certification Creation and interpretation of ITPs, MITPs, QCPs Experience with Stainless Steel, Aluminium, and Carbon Steel fabrications Ability to read and interpret 3D models, DWF, STEP files, and PDFs Proficiency in quality tools and systems (e.g. Minitab, SAP QM) Familiarity with ERP and MRP systems Certifications (Desirable) AS9100 / ISO 9001 Lead Auditor Six Sigma or other recognised quality improvement certifications Skills and Attributes High attention to detail and accuracy Strong analytical and problem-solving capability Confident, clear communicator with strong interpersonal and influencing skills Assertive, resilient, and adaptable to change Highly organised with the ability to manage multiple priorities Collaborative team player who actively contributes and coaches others when required Commercially aware with an understanding of how quality performance impacts production and customer fulfilment Committed to health, safety, environmental compliance, and continuous improvement Welcomes and promotes diversity and inclusion Travel Requirements UK-based role with regular supplier visits Approximately 60% travel / 40% office based Other Requirements Candidates must have an existing right to live and work in the UK Candidates must have passed UK security clearance to the Security Check level or be able to obtain this level. To gain SC clearance will normally require a candidate to have been resident in the UK for a minimum of 5 years. Benefits Along with competitive salaries, CMS2 offers a great benefits package that includes life insurance, a generous leave allowance and more. TPBN1_UKTJ

About a career with Elis Elis is an international multi-service provider, offering textile, hygiene, and facility services solutions. We are a leader in most of the 29 countries in which we operate, employing 52,000 professionals. We have a fantastic opportunity for a committed and motivated Senior Engineer to join a company that invests in training and development to provide their people with the opportunity to flourish and develop their careers! Here at Elis , we recognise that our employees are the company's greatest asset and our investment in our people reflects this. Elis offers a wide range of assignments and career opportunities via a multitude of diverse job roles and career gateways between functions. This vast field of possibilities gives you the opportunity to achieve your career goals. Your Mission at Elis Key Responsibilities of a Senior Engineer: You will possess leadership skills to organise an Engineering team, apply strategies and deliver efficient workflow within an industrial laundry processing plant. Guarantee all activities are carried out in accordance with the Site Health and Safety instructions and the SSG Health and Safety manual, as well as in accordance with relevant engineering standards. Understand compliance responsibilities and maintain records to an auditable standard. Carry out, regular and accurate assessment on energy measurables using trend data. Ensure fast response to deviation in working towards our common CSR goals. Provide knowledge and input into the continuous improvement of plant, machinery, and maintenance activities. Working with your Engineering team to identify areas and find suitable solutions. To ensure the Company's disciplines, rules and standards are maintained. Have technical Engineering experience to order replacement parts and consumables whilst tracking and maintaining budgets. Report and investigate any incidents, accidents or near misses in accordance with Health and Safety Policies. Ensuring that safe systems of work and best practice procedures are adhered to at all times. To ensure the Company assets are maintained to achieve maximum efficiency. Manage contractors on site, ensuring they are working safely and adhering to Health and Safety rules and procedures. You will maintain excellent communication between Production staff and co-workers and ensure all handover of ongoing activities is carried out every day, sharing all other information and practices as required. What will make you stand out? Interpersonal skills to manage and influence people at all levels. A minimum of 6 years' experience working in a manufacturing/process environment. Skilled in both Electrical and Mechanical trades with knowledge of Engineering disciplines including pneumatics, hydraulics, electrical circuits and able to comprehend the relevant drawings/schematics. To share and support the team in their development by mentoring, recognising strengths/weaknesses and building well rounded Engineers. You will be self-motivated, able to make decisions and react quickly to the needs of the business. To record PPM and reactive information into a CMMS system accurately. Maintain PPM relevance by keeping the system up to date with changes. Reporting statistics into group. A logical approach to fault finding with a high attention to detail. Able to travel to offsite training facilities and other factories in the group, as and when required. Desirable skills/knowledge Experience of managing a team of Engineers is a distinct advantage. Previous Industrial Laundry experience. Steam systems and chemical water treatment - BG01 or BOAS accreditation. Water network and heat recovery systems. Electronic component fault finding and testing. BS 7671IET wiring regulations. Inspection and Testing C&G 2391-52. Mentoring apprentice's and/or developing Engineers. PTW risk assessor and contractor control. Legionella control, ACOP L8. Small to medium sized projects, 6 Sigma and Capex. IOSH managing safely or NEBOSH What's on offer? 29 Days Holiday Employee Assistance Programme Are you ready to take your career to the next level? Don't miss out on this exciting opportunity. We are able offer, and encourage career growth, and have national coverage to facilitate ambition. In addition we offer: • 29 days holiday per year • Working with a great team Interested? Then apply online! Your contact person: Katy Everitt HR & Resourcing Manager - ICS Tel: TPBN1_UKTJ

Currently located in Titchfield, Hampshire, Eaton's Aerospace business stands as a global leader in aerospace fuel systems. Our site is undergoing a significant and exciting transformation as we relocate to a newly constructed facility in Daedalus. This state-of-the-art site will serve as the Centre of Excellence for aerospace manufacturing across Europe, marking a new era of innovation and excellence. We pride ourselves as a premier supplier of fully integrated fuel systems for fixed and rotary-wing aircraft. We boast extensive fuel and air system test facilities, facilitating comprehensive testing across a range of conditions with various fuel types What youll do: The Eaton Aerospace team have an opportunity for a Test Equipment/Facility Design Engineer supporting the design, development and qualification of aircraft fuel and inerting system solutions. The role is based at our Eaton Ltd site in Titchfield Hampshire. This role will be the team focal point for the design and manufacture of new test fixtures and test equipment as well as supporting the Engineering Services Manager in maintaining the regulatory compliance of the extensive test facility's. Lead the requirements capture, design development and implementation of test rigs, test stands and fixtures. Manage the test equipment requests, scoping the required work and resource requirements Ability to define test equipment design requirements from functional need Ability to complete test rig and test fixture design (Knowledge of Creo preferred, training available) Support Engineering Services Manager in maintaining test facility regulatory compliance Coordination and leadership of subcontracted test rig and fixture design, support to factory acceptance testing, site acceptance testing and rig handover Preparation and review of technical documentation (engineering proposals, performance specifications, technical reports and papers) in accordance with company procedures. Project management of allocated design tasks, defining time and implementation plan Excellent communication skills are required to create and maintain working relationships across the multi-disciplinary teams Works individually or as a part of a team and with other engineering or cross-functional disciplines to deliver as per customer needs and expectations. Demonstrates Eatons core values and Vision. Qualifications: Apprenticeship in an Engineering Discipline or HNC / HND in Mechanical Engineering or other relevant subject 5 years working in an relevant role Skills: Knowledge of aircraft fuel system components- desirable Knowledge of mechanical engineering principles including design of structural components, hydraulic and pneumatic systems. Experience of writing technical reports / requirement specifications Experience of test rig and fixture design Understanding of test rig controls and instrumentation- desirable Working understanding of ATEX regulations and associated equipment- desirable (training available) Knowledge of risk assessment and risk register documentation- desirable Problem Solving, Creativity and Innovation What we offer: Competitive compensation and benefits package Challenging projects in dynamic collaborative team Great company benefits We make your aspirations matter Eaton encourages internal promotion, whenever possible We make your growth matter - We invest in our employees for the long term not just with salary and benefits, but with ongoing learning and development opportunities made available through Eaton University We make your contributions matter - reliability, safety, efficiency, and sustainability are at the core of our dedication to improving peoples lives and the environment through power management technologies We make your wellbeing matter We put your health and safety first. Wellness at Eaton is more than a program, its about changing the environment by offering the right tools to help empower employees to make that happen The successful applicant will be in contact with US ITAR controlled technology, goods and information. As a condition of employment, employees with access to US ITAR controlled technology and goods may be required to undergo an additional screening process as part of the recruitment process. We are committed to ensuring equal employment opportunities for job applicants and employees. Our recruitment processes use balanced selection criteria and avoid unlawful discrimination against applicants on the basis of their age, colour, disability, marital status, national origin, gender, gender identity, genetic information, race or racial origin, religion, sexual orientation or any other status protected or required by law. TPBN1_UKTJ

Were now looking for a Manufacturing Process Engineer to join our Worksop xsrmqjs manufacturing facility, supporting co. As pioneers in sustainable manufacturing, were reducing environmental impact while delivering high-quality, innovative healthcare solutions made right here in the UK.

Senior Manufacturing Engineer - Process (Metrology).

We’re looking for a Manufacturing Process Engineer to help shape the future of assembly processes. Manufacturing Process Engineer (NPI Projects) -. You’ll work closely with R&D, support projects from concept through to delivery, and ensure processes meet the highest standards of quality and comp

Apply robust change control processes for any deviations from agreed objectives.

Proven experience delivering industrial engineering or manufacturing projects within a contractor environment. Experience working across sectors such as manufacturing, process, food & beverage or similar industrial environments. Working within a contractor environment, you will coordinate internal t

Project Management, Power Transmission Project Operations.Steering Committee, Project Director, Project Portfolio Director (PDD), Management Representative.The Power Transmission Project Operations section is responsible for execution of turnkey and offshore projects within the business group.The Pr

This role is ideally suited to someone from a mechanical or electrical engineering background with experience working within contractor-led industrial environments such as manufacturing, process, food & beverage or related sectors. Experience working within contractor-led projects across manufacturi

Project Partners are now hiring for an experienced Commissioning and QA Manager who has previous experience working within the Civil Engineering and Utilities industries. Our client is a leading utilities contractor specialising in the water and civil engineering sectors. From developing commissioni

Assisting in developing, implementing, or participating in hazard assessment processes and workshops, to improve the organisations compliance to COMAH/MACR, legislation, and relevant good practice. Build and maintain strong, positive, and creditable working relationships with all stakeholders both i

Our most successful hires have come from a range of backgrounds including chemical engineering, process engineering, and mechanical engineering. Degree in Mechanical Engineering, Chemical Engineering, Process Engineering, or closely related discipline. Engineering calculations for LEV and process HV

Senior Project Manager (Remediation & Defects).Competitive salary + excellent benefits.I’m working in partnership with bpha to appoint a.Building Remediation & Defects Project Manager,.This is an opportunity to take real ownership across the full lifecycle of remediation projects, leading on defec

As part of the delivery team, you will partner closely with the Head of Front-End Engineering, acting as the connective layer between engineering, product, design and the wider programme management and delivery function. As Technical Project Manager, you will partner closely with the Front-End Engin

This role will suit a Project Manager with experience in engineering or regulated environments, ideally within power transmission or a similar sector.

Project Manager, Engineering, Construction, Estates, Bids, RIBA, NEC, JCT, CDM, Budgets, Forecasting, Contract Management. Apply robust risk management and quality control processes. Broad understanding of civil engineering, infrastructure, and building works methodologies.

We are seeking an experienced Manufacturing Engineer to join a dynamic and innovative engineering environment. Python, AutoIt) to support manufacturing processes. Familiarity with databases and data-driven manufacturing processes.

Background in commissioning, technical investigations, engineering closeout, or remedial projects.