Trabajos power engineering en BorehamwoodCrear alertas

I am excited to partner with a leading power protection company who have an immediate requirement for a Service Engineer in the South. The successful Service Engineer must be willing to travel and stay away from home overnight occasionally. Candidates will ideally live within 50 miles of the M25 and will travel to customer sites in the South (including London) carrying out service, maintenance and repairs to the companys range of equipment. Candidates living in or close to the following locations are of particular interest, Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone or close surrounding areas. Due to the nature of the role candidates will need to undertake and pass security checks. This is an exciting opportunity for engineers leaving the military with an electronic bias. In return you will join an established company and friendly engineering team where you will manage your own work schedule and time. The role comes with an attractive salary and benefits package. Service Engineer Requirements: • Hold a relevant recognised Electronic/Electrical engineering qualification to Level 3 as a minimum., • Proven experience of working with electronic equipment with a strong technical understanding of electronics and electrics., • Able to read and interpret electrical ...

An opportunity has arisen for a Technical Solutions Engineer, based in Elstree, Hertfordshire to join a leading innovative communications provider for critical solutions. As a Technical Solutions Engineer, based in Elstree, Hertfordshire you will specialise in research, design and testing of radio frequency-based products including low-band UHF technology (420-470 MHz) and two-way radio solutions. You will get the opportunity to be hands on with new software and hardware products to be operationally assessed tested and signed off for customer use in high end consumer environments such as superyachts and NYC skyscrapers. The successful Technical Solutions Engineer, based in Elstree, Hertfordshire will have prior experience across • Proven practical RF testing and occasional design across low-band UHF range., • Good practical skills including soldering, fault-finding and the use of RF test equipment., • Good knowledge of RF digital / analogue and power supply The ideal Technical Solutions Engineer, based in Elstree, Hertfordshire • Electronics Engineering or RF Engineering background, • Knowledge of RF-based technology such as paging & two-way radio is advantageous., • Knowledge of IT hardware (routers), • Programming languages for software applications (ideally C#, Java, Python). In return you will receive a competitive package to reward your contribution and have t...

UPS Service Engineer South Region | Home Based Locations of particular interest: Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone, Oxford, Salisbury, Cambridge, Northampton or surrounding areas. • Circa £51,750 package + Overtime + On Call Allowance + Benefits, • Fully Expensed Company Van with Private Use, • Home Based Role, • Specialist Training Provided Are you an electrically or electronically biased engineer looking for a field based role where you are trusted to manage your own workload and not micromanaged? We are recruiting for a UPS Service Engineer to join a well established engineering company specialising in critical power and UPS systems across the South. This is an excellent opportunity for engineers who enjoy fault finding, problem solving and working independently while developing specialist technical skills. Whats in it for you? • Autonomy and flexibility, • Home based role, • Paid overtime, • Fully expensed van, • Specialist product training, • Established engineering team, • Long term stability, • Varied technical work, • Supportive scheduling team, • Opportunity to work with corporate and high profile customer sites The Role:

Canada Life UK has helped individuals, families and businesses secure their financial futures for over 120 years. Today, we are transforming our technology, culture and ways of working to become a more modern, customer centric and engineering led organisation. As we modernise our IT estate and shift toward cloud, SaaS/PaaS and product centric delivery, we're investing heavily in engineering excellence, empowered teams and great leadership. We're now looking for an Engineering Manager to lead our Home Finance product engineering team-a group responsible for the systems that power our mortgage origination and servicing capabilities. Why join us? Shape the future of Home Finance You'll lead the evolution of our bespoke Ruby on Rails-based mortgage origination and servicing platform, architecting modern, resilient and scalable solutions. True empowerment and autonomy We operate stream-aligned product teams where Engineering Managers have real authority over technology decisions, people development, engineering standards and team culture. Modern engineering focus You'll drive cloud adoption, DevSecOps, automation, data-driven decision making and continuous improvement across the lifecycle. A culture that values people We're building a place where engineers can do their best work - c...

Lead Electronics Engineer (High-Power & RF Systems). Our client is an advanced engineering and technology organisation delivering mission-critical electronics solutions in highly demanding environments, and is consistently recognised a.

Job Title: Senior Power Electronic Design Engineer Location: Hertfordshire Salary: £60,000 - £75,000 per annum Exceptional Senior Power Electronic Design Engineer wanted! Verso is retained to add strength and depth to an established yet boutique leader in the development of custom power electronic solutions, destined for a variety of industries. Based from modern Hertfordshire offices, each project's variety and technical challenge is unique, offering an interesting and evolving way to apply your existing knowledge. There is the possibility for some hybrid working. The aim of the role is to create new design concepts to solve customer challenges and deliver products into production. Review and optimise existing products. The group is led by an experienced and well-regarded technical team. The culture is collaborative and friendly, with ample opportunity to liaise with the engineering team, quality, projects, procurement, sales, and other departments, with occasional customer interaction. Senior Power Electronic Design Engineer: Design and engineering of high-power switch mode power supplies (SMPS) Experience in developing, capturing, and reviewing system-level power requirements. Power supply magnetics design experience, planar magnetics design experience an advantage. Schematic capture and a deep understanding of PCB Layout. (Altium) Manufacturing techniques, processes, and mechanical assembly understanding. Experience in design calculations. Ability to produce or assist in technical specifications, drawings, reports, instructions, and testing. Experience of documentation to support verification and compliance. Knowledge of manufacturing and MRP/ERP systems In your current role, you might be a SMPS design engineer, PSU design engineer, power electronics engineer or electronics engineer with a bias towards power electronics. For more information or a confidential discussion about this truly unique opportunity, please contact Lewis Phillips on (phone number removed) or (url removed) today

Technical Sales Manager Are you a technical sales professional with experience in water treatment and consultative, long-cycle sales? This is an opportunity to own and develop the EPC channel with strong growth potential. You'll have the autonomy to shape strategy, win major projects, and make a measurable commercial impact. BASIC SALARY: Up to £65,000 BENEFITS: ·Bonus (2% of increased turnover) ·23 Days Annual Leave ·Pension LOCATION: This role covers the UK and Ireland. Whilst it is predominantly home-based, you will be required to attend our head office in Hitchin as and when needed. You could be based anywhere in the UK or Ireland. COMMUTABLE LOCATIONS: Hitchin, Birmingham, Northampton, Manchester, Milton Keynes, Leeds, Oxford, Watford, Hemel Hempstead, Belfast, Cambridge, Coventry, Nottingham, Sheffield, Luton, Ireland, Bristol JOB DESCRIPTION: Technical Sales Manager / Water Treatment / EPC This is a new business-focused role targeting EPC (Engineering, Procurement & Construction) contractors across the water and industrial sectors. You'll identify, develop and convert opportunities within a long, technical sales cycle, requiring early engagement at specification stage and a consultative approach. Working closely with engineering teams, you'll develop fit-for-purpose solutions aligned to client requirements. In your first 12 months, you'll be expected to build a pipeline within key EPC and power generation accounts and secure initial project wins, establishing yourself as a trusted partner in the sector. KEY RESPONSIBILITIES: Technical Sales Manager / Water Treatment / EPC As our Sales Engineer, you will: ·Identify and develop new business opportunities within EPC contractors and major projects and uncover new market opportunities with existing clients. Your 1st year target £1.5 million ·Engage early in the project life cycle to influence specifications and solution design ·Manage long sales cycles from initial contact through to project award - a typical sales cycle between 6 months and 2 years ·Work closely with internal technical teams to deliver compliant, commercially viable solutions ·Review customer specifications and drawings to confirm compliance with system design ·Support tendering and technical sales activity by collaborating with internal teams to define process requirements, review specifications and drawings, contribute to costings and commercial input, and coordinate the preparation of compliant, high-quality tender documentation and proposals PERSON SPECIFICATION: Sales Engineer - Water Treatment We're looking for a technical sales professional who is comfortable operating in a consultative, engineering-led environment. You'll be confident engaging with stakeholders at all levels, able to navigate long and often complex sales cycles, and comfortable balancing technical detail with commercial outcomes. You'll be comfortable operating in a role with a high degree of autonomy, where you are expected to pro-actively generate and develop opportunities. You will: ·Have experience selling into the EPC market ·Demonstrate a proven track record in B2B sales, ideally within capital equipment or technical solutions ·Be experienced in managing the full sales cycle, from lead generation through to closing and account development ·Ideally have experience within water treatment or a related sector ·Be willing and able to travel across the UK and Ireland, and potentially Europe, as required, although the requirement is minimal THE COMPANY: We are an established business specialising in the high quality skidded systems, custom engineered and back up by decades of experience. For over 20 years we have been offering our customers a unique service. As well as stocking a wide range of water treatment products, we can build and test complete water treatment systems to suit your requirements. By integrating the products we stock into a customised skidded system, we are able to deliver high quality systems at competitive prices and short lead times. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Sales Engineer, Business Development Manager, Project Sales Engineer, Proposals Engineer, Water Treatment, Process Engineering, Power Generation, Utilities, Industrial Engineering, Oil & Gas, Chemical Processiong, EPC, Engineering, Procurement & Construction, Capital Equipment, Engineered Systems, Water Treatment Plants, Filtrations Systems, Process Equipment, Bespoke Engineered Solutions INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SM18492

Our client, a leading UK civil engineering contractor are seeking a MEICA Project Engineer to deliver design, installation, testing, and commissioning of MEICA systems for water infrastructure projects. You will manage direct and subcontracted works, liaise with DNOs, ensure compliance with WIMES standards, NEC contracts, and oversee FAT/SAT, HAZOP/ALM, and project handover. Key Requirements: Proven experience with MEICA systems: pumps, valves, transformers, RMUs, LV switchgear, PLCs, MCCs, RTUs, instrumentation, and SCADA/Telemetry. Experience delivering projects for regulated water companies. Knowledge of NEC contracts, hydraulic systems, power resilience, and WIMES standards. Authorised Person Electrical (desirable), SMSTS, EUSR, CSCS preferred. Experience within Pumping stations & Water projects. Design & precon focussed to start, and ideally strong Technical background. Additional Info: This is a temporary opportunity and will require site-based / in-person attendance for the duration of the project. Opportunity to work with a well-established UK contractor delivering major water infrastructure projects. Start ASAP / 45 hours per week. Please note: Our client does not accept Ltd company or CIS engagements. This position has been deemed Inside IR35 and must be paid on an Umbrella PAYE or PAYE basis

Business Development Executive Welham Green Davall Gears is seeking a commercially minded individual to take ownership of DSG, our stock gears and distribution business, and develop it into a structured, growing standalone part of the company. DSG currently operates through a mix of subcontract manufacture and distribution supply. The ambition is to professionalise and grow the business through improved product positioning, stronger supplier relationships, enhanced catalogue and web shop capability, and proactive customer development. This role is hands-on and operational but with clear commercial ownership and the opportunity to shape how DSG evolves over the next three years and beyond. Role Purpose To manage and develop DSG as a standalone business unit, improving day-to-day operations while building a stronger commercial, product, and channel strategy to support growth. Key Responsibilities Business ownership: Take day-to-day responsibility for DSG enquiries, orders, suppliers, and delivery. Improve internal processes, ERP data quality, and operational flow. Coordinate subcontract and distribution activity. Customer and supplier relationships: Act as primary contact for DSG customers. Develop strong supplier and distributor relationships. Support sales into both existing Davall customers and new markets. Product and proposition development: Review and refine the DSG product and catalogue offering. Identify opportunities to improve positioning and competitiveness. Support development of a future web shop and digital sales capability. Commercial growth: Improve conversion from enquiry to order. Support pricing and margin discipline. Identify new opportunities, channels, and repeat customers. Contribute to DSG growth strategy. Future business development: Help shape DSG into a structured business unit. Influence sourcing, stock, and product direction. Grow into broader commercial responsibility over time. What We're Looking For Essential: Experience in engineering, industrial products, or technical distribution. Background in technical sales, internal sales, product coordination, or similar. Commercial awareness and interest in growing a product-based business. Confident working with both customers and suppliers. Strong organisational and problem-solving skills. ERP / MRP and Microsoft Office experience. Desirable: Exposure to gears, power transmission, or mechanical components. Experience with catalogue products or distribution models. Involvement in pricing, sourcing, or product range development. Personal attributes: Takes ownership and responsibility. Commercially curious. Practical and solutions focused. Comfortable working across teams. Motivated by building and improving something over time. The Opportunity DSG is currently a small but important part of Davall Gears, with clear growth potential. The goal is to grow DSG into a £1m+ revenue stream within the next three years through stronger commercial focus, improved product positioning, and development of digital and distribution channels. This role offers the opportunity to shape and lead that journey and develop into a broader business leadership position

Job Title: Multiskilled Electrical Engineer Location: Colindale Salary: Up to £45000 per annum Shift Pattern: Monday - Friday 8am - 5pm 2 positions available Overview We are seeking experienced Multiskilled Electrical Engineers to join a large on-site engineering team at a government buliding. This is an excellent opportunity for electrically biased engineers with strong building services experience to work within a critical and high-profile environment. The successful candidates will play a key role in maintaining the site’s electrical and mechanical infrastructure, ensuring all systems operate safely, efficiently, and in compliance with statutory regulations. Key Responsibilities • Carry out planned preventative maintenance (PPM) and reactive maintenance across electrical and mechanical building systems, • Diagnose and repair faults on electrical systems including lighting, power distribution, emergency lighting, and control panels, • Monitor, operate, and maintain Building Management Systems (BMS), • Maintain and troubleshoot HVAC equipment including AHUs, FCUs, and temperature control systems, • Perform electrical testing, inspections, and minor installation works, • Support maintenance of pumps, motors, generators, and associated plant equipment, • Respond promptly to breakdowns and emergency situations during night shifts, • Ensure all work is completed in line with health & safety regulations and site procedures, • Maintain accurate maintenance logs and technical reports, • Liaise with subcontractors and site management to ensure smooth site operations, • Support continuous improvement and reliability of all critical building services systems Requirements • Strong electrical bias with good all-round building services maintenance knowledge, • Experience working with BMS, HVAC systems, AHUs, FCUs, and electrical distribution systems, • 18th Edition Wiring Regulations qualification essential, • City & Guilds or NVQ Level 2/3 in Electrical Installation, Electrical Engineering, or equivalent, • Strong fault-finding and problem-solving abilities, • Experience carrying out both reactive and planned maintenance, • Ability to work independently and confidently during night shifts, • F-Gas certification desirable but not essential Package & Benefits • Salary up to £45,000 per annum, • 20 days holiday plus bank holidays, • Overtime opportunities available, • Long-term stability within a well-established engineering team, • Career progression and training opportunities available

NW33377 Mechanical Technician £47,000 - £50,000 + Attractive Benefits Hertfordshire Alecto Recruitment is partnering with an established Owner Operator of CCGT Power Stations across the UK. Together we are seeking a Mechanical Technician to join their maintenance team on their Hertfordshire site to carry out mechanical maintenance activities. What's on offer: £45,000 - £48,000 Living Allowance: £2,172 per annum Discretionary bonus: to 20% Overtime 1.5x base LTIP Entitlement: Fixed Value: £1,000, Variable Value: £3,000 PMI: Single cover Income Protection Life Assurance Holiday: 25 days plus BH Private Pension Role Overview Carry out hands-on mechanical maintenance, fault finding, and repair activities across plant equipment and systems. Plan and coordinate preventative and corrective maintenance to ensure safe, reliable plant performance. Prepare risk assessments, method statements, and work packs for maintenance tasks and shutdown activities. Manage contractors and maintenance service contracts, including supervision during outages, inspections, and overhauls. Support major plant inspections, interim outages, and mechanical overhauls across thermal generation assets. Ensure full compliance with HSE legislation, company safety rules, and environmental standards. Act as Competent Person / Authorised Person where required to support safe system of work, isolation, and permit processes. Provide 24/7 maintenance support and rapid fault response during plant failures and breakdowns. Support budget control, procurement, and technical specification development for mechanical works and spares. Work cross-functionally with operations, suppliers, and other engineering disciplines to improve reliability and maintenance best practice. Skills & Qualification Clear and confident communicator, able to operate effectively within both open-plan office and site-based environments. Professional, dependable, and accountable, with a strong sense of ownership across all areas of responsibility. Background in power generation is preferred; however, candidates with strong transferable experience from heavy industrial sectors will also be considered, including pharmaceutical, marine, waste-to-energy, and other process-intensive industries. MUST BE: at minimum HNC qualified in a Mechanical Engineering field with demonstrable practical maintenance and plant engineering experience. Open-minded, adaptable, and resilient with a collaborative approach and the ability to work effectively as part of a close-knit team. Flexible and responsive to changing plant priorities and operational demands. Analytical and decisive under pressure, with strong fault-finding and problem-solving skills particularly during live plant issues or failures. Demonstrates the potential and ambition to progress into a Team Leader position in the future. INDW To apply for this role please send your CV or call Noah on (phone number removed) ext 218 for more information. If you have not received a response to your application within five working days, please consider your application unsuccessful for this position. Equally if this role would not be of interest to you but may be for a suitable friend or colleague, we can offer paid referral fees for successful placements

An opportunity has arisen for a Technical Solutions Engineer, based in Elstree, Hertfordshire to join a leading innovative communications provider for critical solutions. As a Technical Solutions Engineer, based in Elstree, Hertfordshire you will specialise in research, design and testing of radio frequency-based products including low-band UHF technology (420-470 MHz) and two-way radio solutions. You will get the opportunity to be hands on with new software and hardware products to be operationally assessed tested and signed off for customer use in high end consumer environments such as superyachts and NYC skyscrapers. The successful Technical Solutions Engineer, based in Elstree, Hertfordshire will have prior experience across Proven practical RF testing and occasional design across low-band UHF range. Good practical skills including soldering, fault-finding and the use of RF test equipment. Good knowledge of RF digital / analogue and power supply The ideal Technical Solutions Engineer, based in Elstree, Hertfordshire Electronics Engineering or RF Engineering background Knowledge of RF-based technology such as paging & two-way radio is advantageous. Knowledge of IT hardware (routers) Programming languages for software applications (ideally C#, Java, Python). In return you will receive a competitive package to reward your contribution and have the opportunity to gain professional and career development in an industry leader. Apply Now, if this Technical Solutions Engineer, based in Elstree, Hertfordshire job sounds like the opportunity for you, click the APPLY NOW button, or alternatively call Tom Drew on 01582 878 848 or email quoting THD1368. Alternatively, if this job is not suitable but you are looking for a job within Sales, please call 01582 878 848 for a confidential discussion. TPBN1_UKTJ

High Voltage Operative (11kV AP) Nationwide Sites | Head Office: Hertfordshire | Full Time | £65k-£70k+ + Overtime & On-Call Overview An established Independent Connections Provider (ICP) is seeking an experienced High Voltage Operative to deliver contestable electrical network connection projects across the UK. This is a field-based role focused on the safe installation, testing, commissioning, and maintenance of HV and LV network assets (up to 11kV) across renewable, commercial, industrial, and infrastructure developments. The Role Operational Delivery Deliver construction, commissioning, and maintenance works on 11kV contestable connections Install and terminate HV/LV cables and associated plant Undertake testing and commissioning of cables and electrical equipment Support remedial and project works across multiple UK sitesAuthorised Person Duties Carry out HV & LV switching operations Isolate, earth, and identify points of work Issue and manage safety documentation in line with HV safety rules Ensure full compliance with DNO/IDNO procedures and project-specific method statementsSite & Stakeholder Coordination Work closely with project managers, engineers, and DNO/IDNO representatives Maintain accurate site documentation including test sheets and as-built records Support programme delivery through efficient and safe site execution About You Qualifications & Authorisations 11kV Authorised Person (AP) status essential Current AP certification (IDNO/DNO preferred) HNC in Electrical Engineering (desirable) EUSR SHEA Power Street Works & Cable Identification IOSH / NEBOSH / SMSTS advantageous Full UK Driving LicenceExperience Minimum 5+ years in HV network construction or maintenance Experience delivering ICP contestable works Strong understanding of HV switching, commissioning, and testing Familiar with DNO/IDNO standards and compliance frameworks NERS Assessing/Authorising Officer experience highly advantageousPersonal Attributes Strong safety-first mindset Technically competent and confident working on live networks Flexible and prepared to travel nationwide with overnight stays Able to support and guide site teams with sound technical knowledge What's on Offer £65k-£70k+ basic salary Overtime and on-call payments 25 days annual leave + bank holidays Company vehicle and fuel card Ongoing training and HV authorisations EMI scheme (post-qualifying period) Private healthcare Death in service benefit Summary This is a senior, hands-on HV operational role suited to an experienced 11kV Authorised Person looking to work on diverse nationwide connection projects within a growing ICP environment. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status

The Senior Software Engineer is responsible for the whole or an assigned portion of a design from preliminary specification through to verified software. The Senior Software Engineer provides expert knowledge of software design, test and verification. Job Functions · To use good engineering practice to produce software for new, innovative and profitable products and solutions. · To support and enhance existing software in accordance with commercial requirements. · Responsible for specification, design, implementation, testing and maintenance of software to support the company’s products and services. · Undertakes additional project tasks as required by management. · To provide support and advice to less experienced colleagues. · To act as a role model for junior staff. · Technical liaison within the organisation, as well as with customers, suppliers and collaborators on software related matters. · Any other tasks associated with this role. Requirements Experience: · Excellent understanding of C++. · Experience of taking projects through the software development life cycle. · Good English communication skills, written and verbal. · Good understanding of Microsoft Visual Studio 2022/2026. · Experience with GUI/UX or HCI desirable. · Knowledge of scripting languages (e.g. Python, PowerShell) desirable. For more information on this role, or any other jobs across; Embedded, C++ programming, Embedded Linux, Golang Development, FPGA, Python, Javascript, C#, Electronics, Secure Boot, Power Electronics, Digital Design, Machine Learning, Data Science or Simulation contact us today

Would you like to work for one of the UK's leading Civil Engineering companies? Would you like the opportunity to work on a varied range of HV power projects? If so then this could be a step in the right direction! Our client are looking to expand the team with an experienced electrical Site Manager to work on substation build and refurbishment projects. These include transformer and switchgear replacements on distribution networks. The position offers excellent career growth potential. Salary to £58k | Company Vehicle or Allowance | Stakeholder Pension | Annual Bonus | 25 Days Holiday + Bank Holidays SIte Manager Responsibilities: As a Site Manager, you will be responsible for managing various aspects of substation build and refurbishment projects including transformer and switchgear replacements Working closely with Project Managers; ensuring that programmes are regularly updated with future projections Ordering all required materials to site in a timely manner Monitoring site Health & Safety and associated documentation along with all ensuring that all site specific RAMS are in place Working with commercial staff, advising of any potential variation with works; ensuring that everything is documented Regularly liaising with clients, providing progress reports and assisting with site audits Site Manager Requirements: Previous experience as a Site Manager on electrical substation build or refurbishment projects Substation entry accreditation for a Distribution Network (DNO) * Qualified with SMSTS and First Aid (3-day) #power #sitemanager #powersupervision #sitemanagement #siteagent #dno #distributionnetwork #substation #substationaccess #cdmregulations #cdm #riskassessment #methodstatement #rams #undergroundcabling #highvoltage #hv #mainsrenewal #nec #11kv #33kv #132kv By applying for this position, you are agreeing for CVL:LDN to hold and process your personal data in accordance with our Privacy Policy. Your data will be shared with clients relevant to any roles that you have applied for with us. If at any time you wish to withdraw your consent, then please contact us

BESS Commissioning Engineer Location Barnet & Rayleigh, UK Contract Type Contract Overview We are currently seeking experienced BESS Commissioning Engineers to support utility-scale Battery Energy Storage System (BESS) projects across multiple UK sites. The successful candidate will play a key role in the commissioning, testing, troubleshooting and energisation of battery storage systems, working closely with site teams and engineering support functions to ensure safe and efficient project delivery. This opportunity would suit candidates with previous experience within BESS, substations, renewable energy, HV/LV systems or wider power infrastructure environments. Responsibilities • Carry out commissioning and testing activities for Battery Energy Storage Systems (BESS), • Support cold and hot commissioning activities across electrical systems and associated equipment, • Perform fault finding, troubleshooting and system verification activities, • Assist with energisation procedures and site acceptance testing, • Support commissioning documentation, testing records and handover activities, • Work alongside site management and engineering teams to coordinate commissioning activities, • Verify SCADA/communications systems and assist with system integration checks, • Ensure all work is completed in line with site safety procedures and operational standards, • Maintain accurate reporting and commissioning documentation throughout the project lifecycle Requirements • Previous commissioning experience within BESS, renewable energy, substations, HV/LV systems or related electrical infrastructure projects, • Strong understanding of electrical systems, commissioning procedures and power infrastructure environments, • Experience with testing, fault finding and energisation activities, • Ability to read and interpret electrical drawings and technical documentation, • Strong communication and problem-solving skills, • Comfortable working in fast-paced site environments Desirable • Utility-scale BESS project experience, • HV/LV Authorised Person experience or electrical certifications, • Experience with SCADA, EMS, PCS/inverters or Modbus communications, • CSCS, IOSH, NEBOSH or SMSTS certifications, • Renewable energy or substation commissioning background Contract Details • £55 per hour, • 10-hour days Monday–Friday, • 2pm finish on Fridays, • Initial project in Barnet (3–4 weeks), • Follow-on project in Rayleigh, Essex (3–6 months) Apply Please apply with your updated CV to be considered for this opportunity

Field Service Engineer (Diesel & Gas Engines) £37,477 + Company Benefits + Training + Progression + Overtime + Company Van + On Call + Door-to-Door Pay London - UK Patch Are you a Field Service Engineer with diesel and gas engine experience looking to join an industry-leading energy technology company, working across a wide range of sites throughout the UK with the benefit of door-to-door pay? A leading international power generation specialist delivering low-carbon energy and battery storage solutions. Established in 80's, the business designs, builds and maintains systems including gas engines, CHP, biogas, landfill gas and large-scale batteries. They work with public sector bodies, industrial clients and energy developers to deliver turnkey projects supporting energy efficiency and net zero goals. With a strong international presence and multi-million-pound turnover, the organisation is known for its technical expertise and delivery of reliable, sustainable energy solutions. In this role, you will carry out planned and reactive maintenance, servicing, and installations on gas and diesel engine systems across customer sites throughout the UK. You will diagnose mechanical and electrical faults, undertake local and remote fault-finding, and complete repairs in line with manufacturer specifications and service schedules. This role would suit a Field Service Engineer with diesel and gas engine experience from a power generation or industrial background, looking to join a leading energy technology business working across UK sites on low-carbon energy and battery storage projects. The Role: Carry out planned and reactive maintenance on gas and diesel engine systems across UK sites Diagnose electrical and mechanical faults using local and remote fault-finding techniques Install, service and repair engines and ancillary equipment to manufacturer standards Liaise with customers, contractors and internal teams to ensure smooth service delivery The Person: Experience in field service engineering with gas and diesel engine systems Strong mechanical and electrical fault-finding and diagnostic skills Full UK driving licence and willingness to travel nationwide Happy to partake in on call rota Reference: BBBH25467 Field, Service, Engineer, Power, Generation, CHP, Gas, Engines, Diesel Engines, Biogas, Landfill Gas, Battery Storage, BESS, Mechanical, Electrical, Maintenance, Fault, Finding, Diagnostics, Planned, Reactive, Installation, London, UK, Wide If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Field Service Engineer (Diesel & Gas Engines) £37,477 + Company Benefits + Training + Progression + Overtime + Company Van + On Call + Door-to-Door Pay London - UK Patch Are you a Field Service Engineer with diesel and gas engine experience looking to join an industry-leading energy technology company, working across a wide range of sites throughout the UK with the benefit of door-to-door pay? A leading international power generation specialist delivering low-carbon energy and battery storage solutions. Established in 80's, the business designs, builds and maintains systems including gas engines, CHP, biogas, landfill gas and large-scale batteries. They work with public sector bodies, industrial clients and energy developers to deliver turnkey projects supporting energy efficiency and net zero goals. With a strong international presence and multi-million-pound turnover, the organisation is known for its technical expertise and delivery of reliable, sustainable energy solutions. In this role, you will carry out planned and reactive maintenance, servicing, and installations on gas and diesel engine systems across customer sites throughout the UK. You will diagnose mechanical and electrical faults, undertake local and remote fault-finding, and complete repairs in line with manufacturer specifications and service schedules. This role would suit a Field Service Engineer with diesel and gas engine experience from a power generation or industrial background, looking to join a leading energy technology business working across UK sites on low-carbon energy and battery storage projects. The Role: Carry out planned and reactive maintenance on gas and diesel engine systems across UK sites Diagnose electrical and mechanical faults using local and remote fault-finding techniques Install, service and repair engines and ancillary equipment to manufacturer standards Liaise with customers, contractors and internal teams to ensure smooth service deliveryThe Person: Experience in field service engineering with gas and diesel engine systems Strong mechanical and electrical fault-finding and diagnostic skills Full UK driving licence and willingness to travel nationwide Happy to partake in on call rotaReference: BBBH25467 Field, Service, Engineer, Power, Generation, CHP, Gas, Engines, Diesel Engines, Biogas, Landfill Gas, Battery Storage, BESS, Mechanical, Electrical, Maintenance, Fault, Finding, Diagnostics, Planned, Reactive, Installation, London, UK, Wide If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

I am excited to partner with a leading power protection company who have an immediate requirement for a Service Engineer in the South. The successful Service Engineer must be willing to travel and stay away from home overnight occasionally. Candidates will ideally live within 50 miles of the M25 and will travel to customer sites in the South (including London) carrying out service, maintenance and repairs to the companys range of equipment. Candidates living in or close to the following locations are of particular interest, Watford, Bishops Stortford, Bletchley, Buckingham, Bedford, Luton, Slough, Reading, Swindon, Crawley, Camberley, Guildford, Horsham, Maidstone or close surrounding areas. Due to the nature of the role candidates will need to undertake and pass security checks. This is an exciting opportunity for engineers leaving the military with an electronic bias. In return you will join an established company and friendly engineering team where you will manage your own work schedule and time. The role comes with an attractive salary and benefits package. Service Engineer Requirements: Hold a relevant recognised Electronic/Electrical engineering qualification to Level 3 as a minimum. Proven experience of working with electronic equipment with a strong technical understanding of electronics and electrics. Able to read and interpret electrical diagrams and schematics. Flexible approach willing to travel and stay away from home on occasions. IT literate. Self-motivated and organised. Ability to participate in a callout rota. Hold full clean driving licence. Willing to undertake and pass security checks. Service Engineer Benefits: Annual salary is circa £51,750, which is made up of £45,000 basic and a guaranteed shift allowance of 15% (£6,750). 37 hour working week with alternate weekend working. Overtime paid. Callout allowance. Company van, mobile phone, laptop, tools, PPE and uniform provided. Company fuel card and credit card for expenses provided. Private medical scheme and pension scheme after probationary period. Opportunity to join a friendly team and manage your own workload. NOTE Our client encourages applications from candidates from both commercial and ex-military, Royal Navy, British Army, Royal Air Force with electronic/electrical engineering backgrounds. TPBN1_UKTJ

Knowledge and experience of key Power system interface requirements (power system stability, power quality and protection co-ordination). Knowledge of the integration of power electronic conversion equipment into power system designs (Inverters, rectifiers, Active Front End, filter interactions). Kn

Please ensure you complete your.Fusion or by clicking on the application link in the section of the application form titled.REVIEW SKILLS AND QUALIFICATIONS”.ACTUAL CLOSING DATE: Applications must be received by 3 June 2026 AT 11:55PM.South Lanarkshire Council require an experienced Electrician t

In depth understanding of Power System Architecture, Power Generation and Distribution, Protection and Co-ordination or Power Earth Fault Monitoring. The Electrical Engineering Power Team:. The Electrical Engineering Power Team are working on the UK’s next-generation SSN design that incorporates t

Degree in Mechanical Engineering (or similar).

Opportunity to support cutting-edge defence technology projects within a highly innovative engineering environment. Our client is an advanced engineering and technology organisation delivering innovative solutions across highly secure and complex defence programmes. Their multidisciplinary teams wor

Degree in relevant engineering discipline (mechanical, mechatronic etc.

You should be educated to degree level in building services engineering, mechanical engineering or equivalent. Establishing and developing the design of engineering solutions and systems.

Job Title - Senior Mechanical Design Engineer.Duration - 3 Month Contract (potential for extension).Working Model - Fully remote or onsite in Bridgend, Wales.Hourly Rate - Circa £40p/hour (Outside IR35).Senior Design Engineer Overview.My client is seeking an experienced.Senior Mechanical Design Eng

For Maintenance and Operations Engineering Technician, these elements consist of a Knowledge Assessment, Practical Observation and a Technical Interview. L4 qualification in a relevant engineering discipline.

Mechanical Technician (Nuclear/High-Hazard / Vacuum Systems / Industrial Engineering). Must hold a Level 3 NVQ in Mechanical Engineering (or equivalent) with a completed apprenticeship, demonstrating the ability to supervise junior fitters and manage work packages with minimal direct oversight.

The company are a leading manufacturer of injection mould and extrusion moulded components and products.Scroll down to find an indepth overview of this job, and what is expected of candidates Make an application by clicking on the Apply button.They are seeking a skilled and experienced Maintenance E

The Recruitment Crowd are currently recruiting on behalf of our industry-leading client based in the YO42 area.We are looking for multiple Warehouse Operatives to join the team.THIS ROLE IS A PERMENANT POSITION FOR THE CORRECT CANDIDATE! xrnqpay FULL TIME WORKERS NEEDED!.Hours:Monday to Friday, 2:30

Our client is a well-established organisation operating within a highly regulated manufacturing environment, specialising in the development and production of specialised healthcare products.They are known for their commitment to quality, innovation, and maintaining the highest industry standards.Wh

Position: Multi-Skilled Maintenance Engineer Location: Somerset (Commutable from, Sherborne, Yeovil, Glastonbury, Shepton Mallet, Bruton, Wincanton and surrounding areas) Salary: £45,000 - £48,000 + Bonus Shift: Monday to Friday (Double Days) Are you a highly skilled Maintenance Engineer looking f

MB674: Multi-Skilled Maintenance Engineer Location: Bury St Edmunds Salary: £40,000 Working Hours: Mon to Fri 8am to 4.Overtime opportunities + 1 in 3 call out (after 3 months of employment) Company Benefits: Generous holiday allowance, Contributory pension scheme with life assurance, Employee shar

Electrical Engineer - FMCG / Food Manufacturing Were looking for a skilled and proactive Electrical Engineer to join our dynamic team within a fast-paced Food/FMCG manufacturing environment.If you thrive on solving problems, improving systems, and keeping production running smoothly, this role is fo

Working exclusively with our client, an established injection moulding manufacturer, we are looking for a Maintenance Engineer to join their team during an exciting period of sustained business growth.Annual company performance bonus.Excellent career progression, training & development xrnqpay o

Reactive Maintenance Engineer Location: Lincolnshire (Grantham area) Salary: Competitive + benefits Shift Pattern: 4 on / 4 off (12-hour shifts, days) The Role Were working with a well-established industrial recycling and processing business operating a high-volume, 24/7 facility.Theyre looking for

Thrive Group are delighted to working with our client in Somerset who are actively looking to recruit a Multi-Skilled Engineer , with an electrical bias t to join the Engineering team responsible for the daily maintenance of our packing and production equipment and site facilities on a permanent bas

We are currently recruiting on behalf of a prestigious 5-star hotel and resort for a Shift Engineer to join their Maintenance team.This is an exciting opportunity to work within a high-end hospitality environment, ensuring the property is maintained to the highest standards and that guests receive a

Mobile Maintenance Engineer (Forklifts) £40,000 - £44,000 + Overtime + Door-to-Door Pay + Bonus + Training + Company Vehicle + Fuel Card Watford Are you a Field Service Engineer with experience in mechanical, electrical or hydraulic systems, looking for a well-paid, local patch role with door-to-d

Van Mobile Maintenance Engineer London (M25 Coverage) London / Within M25 Working Hours: Monday to Friday: 8:00am 5:00pm Package: £43,000 basic salary Company van + fuel card provided Overtime readily available Call-out rota: 1 in 6 weeks (£130 standby payment) 25 days annual leave + Bank Holidays

Birchwell Associates are supporting a growing renewable energy business in the South West in the search for an experienced Solar Electrician to join their installation team.This is an excellent opportunity to join a fast-growing clean energy organisation delivering Solar PV, battery storage and wide

Electrician required for long-term contract working Nationally (Accommodation paid for when staying away).I have a very good client of mine looking for an Electrician, to provide installation works to commercial and industrial clients.The successful candidate will have 18th edition regs and currentl

Abbey Mechanical Services Ltd is an independent Forklift Truck Company who sell, hire and service & maintain all makes and models of forklift trucks in and around the West Midlands area.Abbey Mechanical has been under new ownership and management since 2016 and as the business continues to expand we

Meridian are looking to recruit an Electricians to work on a commercial project in Richmond DL11.This will be working for an Electrical contractor who work across the UK on various commercial sites both new build and refurbishments.

Multi-Skilled Maintenance Engineer.Monday to Friday, alternating weekly between 6 AM - 2 PM and 2 PM - 10 PM shifts.Consortium are proud to support their market leading client who are looking to appoint a Multi-Skilled Maintenance Engineer to join their team.If you are looking for a business who can