Power engineering jobs in SunderlandCreate job alerts

Enspec is evolving its manufacturing capability, and this role sits at the heart of that shift. We are looking for a Senior Electrical Engineer who combines deep technical expertise with hands-on manufacturing experience. You will lead the delivery of high-quality engineered products—harmonic filters, PFC equipment, and wider power-quality systems—through accurate design, robust manufacturing packs, thorough testing, and strong root-cause analysis. You’ll act as a technical authority within our manufacturing environment, ensuring our products meet IEC/BSI standards, comply with grid codes, and are built reliably, safely, and to spec. You will also support onsite surveys to inform accurate design data, taking a share of the responsibilities currently held by junior engineers as the team develops. This role requires initiative, high technical standards, and the ability to bridge design with real-world manufacturing and testing. The Role Manufacturing Delivery & Engineering Support • Produce complete, accurate, and manufacturable engineering packs—including schematics, BOMs, wiring diagrams, layouts, build instructions, and test plans., • Provide real-time technical support to the manufacturing team during assembly, wiring, build, and FAT., • Lead fault diagnostics and root-cause analysis for manufacturing issues, field returns, or test failures., • Own engineering change control and ensure updates flow efficiently into manufacturing documentation., • Coordinate and lead factory acceptance testing (FAT), including test documentation, witness testing and compliance checks., • Ensure all manufactured systems meet IEC, BSI and other relevant UK and international standards. Design & Technical Leadership • Lead the design and development of advanced electrical systems such as harmonic filters, power factor correction systems, switchgear interfaces and LV/HV assemblies., • Validate designs through calculation, simulation, or modelling as appropriate., • Drive continuous improvement in manufacturability, product quality, and design consistency. Technical Standards & Compliance • Maintain working knowledge of IEC/BSI standards for design, manufacturing, testing, and safety., • Ensure all designs and manufactured items comply with internal quality procedures and external certification requirements (ISO, grid codes, client specifications)., • Support documentation and risk assessments relating to electrical safety, test procedures, and compliance. Site Surveys & Client Interface • Conduct electrical site surveys to capture measurements, installation constraints, and integration requirements., • Prepare clear survey reports to feed into accurate design and manufacturing planning., • Support pre-installation and post-installation technical queries. Testing, Validation & Quality Assurance • Lead end-to-end testing and validation of products—including insulation testing, functional testing, continuity checks, harmonic filter tuning checks, etc., • Develop test rigs, procedures, and commissioning documentation to support consistent product validation., • Identify failure modes and implement corrective and preventive actions (CAPA). Collaboration, Mentorship & Cross-Team Work • Work closely with manufacturing, engineering, procurement, and project teams to ensure smooth product delivery., • Provide technical mentorship to junior engineers and technicians, helping them build diagnostic and manufacturing-readiness skills., • Support cross-functional initiatives to improve quality, reduce build time, and strengthen standardisation. Qualifications and Requirements • Bachelor’s degree in Electrical Engineering or a related field; a Master’s or higher is preferred., • Significant hands-on experience in electrical engineering, with a focus on design and development of electrical systems., • Extensive experience in the renewable energy sector and related industries., • Deep understanding of electrical standards and regulations, both national and international., • Proven track record of technical innovation and practical application in electrical engineering., • Proficient in using advanced electrical engineering software and tools for design and analysis., • Excellent problem-solving skills with the ability to tackle complex technical challenges., • Strong project management skills with experience leading technical projects to successful completion., • High level of attention to detail and commitment to quality., • Excellent written and verbal communication skills, particularly in technical documentation., • Ability to work independently and as part of a collaborative technical team. Preferences • Proficiency with electrical CAD/design tools (e.g., AutoCAD Electrical, EPLAN, or similar)., • Experience in the design of reactive power compensation and power quality systems from 11 kV to 400 kV, including harmonic filters and associated equipment., • Demonstrated ability to mentor and develop junior engineering talent., • Commitment to continuous learning and staying updated with the latest advancements in electrical engineering. Benefits • Competitive salary based on experience., • Flexible working hours and a supportive work environment., • Opportunities for career growth and advancement within a dynamic and growing company., • Training and development opportunities to enhance your skills and knowledge., • 24 days of holidays plus bank holidays. At Enspec, we believe every employee is critical to our success. We prize good people, ambition, and hard work. We offer a range of flexible employee benefits along with career development opportunities. About Enspec Power Ltd. Enspec Power is a down-to-earth company that values innovation, hard work, and continuous improvement. We foster a culture where communication and teamwork are paramount, and we aim to make a significant impact in the field of electrical power. Working Hours: Monday - Friday, 8am to 4:30pm Monday - Thursday and 8am to 1:00pm on Friday, with a half-hour lunch.

The Rewards and Benefits on Offer: • Immediate start available, • Competitive salary and benefits package, • Collaborative and supportive work environment, • Free onsite parking MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Senior Project Lead to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway. If you have experience within a Senior Project role or similar in a relevant industry, apply now for an immediate response! The Job You’ll Do: • Plan, coordinate, lead, and monitor the design and launch of product development initiatives, including motors, system controllers, embedded software, support products, and customer-specific projects., • Collaborate directly with customers, sales teams, and product management to define requirements, develop solutions, and provide ongoing product support., • Develop and manage project cost estimates and schedules, ensuring deliverables are completed within approved budgets and timelines., • Facilitate regular project status meetings and design reviews, providing clear and accurate progress reports to management., • Oversee and support the work of design engineers assigned to the project., • Drive projects through all required stages, • Maintain comprehensive project documentation, • develop detailed engineering specifications., • Identify and implement improvements to enhance the project development process., • Support test engineering in defining initial production test equipment requirements and procedures., • Qualified to Degree level or above Bachelors degree and 3+ years relevant industry experience., • Experience within power electronics or embedded control products - desirable, • Demonstrated understanding of electronics, software development and mechanical design., • Demonstrated project planning, leading, organizing and tracking skills., • Demonstrated knowledge of good engineering practice and experience of following Product Development Cycles, • Effective verbal and written communication skills as well as excellent interpersonal skills., • Accuracy and good organizational skills.

Senior Validation Engineer An exciting opportunity has arisen for a Senior Validation Engineer in Newcastle upon Tyne to join a highly visible, cross-functional engineering team supporting new product development and product continuation. This role is ideal for an engineer with experience in validation, verification, and compliance testing of power electronic systems, looking to work on cutting-edge technologies such as motor drives, SMPS, and DC-DC converters. About the Role in Newcastle As a Senior Validation Engineer, you will be responsible for ensuring that newly developed electronic products meet all regulatory and compliance standards, including CE marking and UL certification. You will work closely with hardware, software, mechanical, and systems engineering teams, as well as project and quality management, to deliver robust, compliant products. This role combines hands-on engineering work (test setup, debugging, building test rigs) with technical documentation and planning, making it ideal for someone who enjoys both practical and analytical work. Key Responsibilities • Develop and execute Validation & Verification (V&V) test plans for new products, • Define and document test procedures, criteria, and compliance requirements, • Perform testing on power electronic systems (motor drives, SMPS, DC-DC converters), • Set up and configure test environments, equipment, wiring...

Introduction Saab UK is part of Scandinavia's largest defence company, bringing together the best of Swedish and British innovation. Saab offers world-leading solutions and services in defence, aviation, space, and civil security to keep people and society safe. Our UK presence has been growing at pace, meaning we can offer a wide range of opportunities for personal fulfilment and career growth. We currently employ over 600 people across eight sites in the UK, and our specialisations include software engineering, underwater robotics, radars, AI, and armed forces training. The Role: This role will be a part of our Saab Seaeye business in Fareham. This can be a 12 month FTC. In this role you will take responsibility for the full-lifecycle design and development of bespoke power conversion and transmission solutions in line with the company's business needs through innovation, creativity and professionalism. As Lead Engineer you will act as Technical Authority for concurrent power projects: from in-house designs to outsourced specification and management. Key Responsibilities: The role seeks an engineer with excellent knowledge of power architectures, transmission, conversion and distribution, whilst having an appreciation for the real-world subtleties involved in creating robust and reliable power systems. You may be working on anything from large-scale power conversion products, efficient cabled transmission designs all the way through to motor drives and low voltage converters. Our voltages range from 24V to 5000V with powers from 500W to 250kW. You will be responsible for the successful design, implementation and delivery into our products. This may include technically leading small multi-disciplinary teams and therefore the candidate must show an aptitude for directing and coordinating project activities and have strong communication/interpersonal skills. A product-focussed mindset is essential: taking a view across the different engineering disciplines to deliver the most appropriate solution. Our products provide unique challenges in designing non-conventional solutions which can meet size, weight and efficiency demands. Qualifications and Skills: Essential: • Significant Experience in Power Electronics, • Full-lifecycle experience: from concept to tested solution, • Self-starter: taking the lead and having a proactive mindset, • Excellent theoretical knowledge backed up by proven hands-on experience, • Proven knowledge of power transmission: AC and DC, applied to multi-km cabled solutions, • Proven Knowledge of DC converter topologies: Buck/Boost/Flyback/LLC/Full-Bridge, • Proven Knowledge of AC converter techniques: single phase/multiphase, power factor correction, • Experience of power converter product design AC-DC, DC-DC and DC-AC inverters, • Experience working with power switching devices: MOSFET, IGBT, SiCFET, GaNFET and associated drive circuitry, • Experience working with voltages up to 5kV and multi-kW powers, • Experience in designing or specifying custom transformer and magnetic components, • Experience using modelling and simulation packages, • Experience in both digital and analogue design concepts, • Experience of filter design and implementation, • Experience designing/specifying control systems for power conversion, • Knowledge of thermal management techniques, • Knowledge of design-for-compliance, • Experience developing requirements specifications and test procedures, • High Voltage Experience up to 5kV, • Thermal modelling experience, • Motor design principles and control techniques

Electrical Design Engineer (Building Services) £55,000 - £65,000 + Remote + Bonus + Private Healthcare + 25 Days Holiday + Benefits Newcastle Are you a Building Services Design Engineer with an electrical background looking for a truly unique role, working on a range of technically challenging projects within Ministry of Defence sites across the UK? Are you looking to join a reputable company offering you plenty of autonomy to manage your own workload, with flexible hours and hybrid working? In this remote role you will be delivering projects ranging from £5k to £3.5m in value, by working hands-on with design and overseeing budgets and timescales. This will involve designing HV/LV, network distribution, lighting and fire and security systems for example. This steadily growing building services company were founded over 30 years ago and pride themselves on maintaining long-standing client relationships, whilst looking after their employees through recognition and being an employee-owned trust. This role would a Building Services Design Engineer with electrical experience looking for a one-of-a-kind role working on projects they would find nowhere else, specialising in the MoD and MoJ sites across the UK. The Role: • Working on electrical designs, specifications, and attending site meetings, • Involved with lighting, alarm systems, HV/LV and network distribution, • 70% design work, whilst overseeing projects including budgets and timescales, • Hybrid working, in the office 3 times a week, • Monday to Friday 37.5 hours a week with flexible working The Person: • Building Services Design Engineer, • Electrical background Reference: BBBH23997c Engineer, Engineering, Mechanical, Electrical, Power, HVAC, Project, BMS, Chartered, Construction, Building, Services, Design, Estimator, Oldham, Sunderland, Middlesbrough, Washington, Durham If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. JBRP1_UKTJ

My client is looking for an experienced Electricians Mate to join an innovative, established business on an ongoing temporary basis based in Sunderland. This position will be based in a factory environment. This placement will last between 6 to 12 months. Package - • Standard rate is £12.81 per hour * Overtime rate at £19.22 per hour * Monday to Thursday 08:00 until 16:30 Friday 08:00 until 13:00 * 25 days holiday increasing year on year Key Responsibilities - • Carry tools, materials, and equipment to job sites * Prepare and clean work areas before and after tasks * Help with basic electrical tasks under supervision * Run cables, drill holes, and mount electrical components * Follow technical instructions and site plans * Ensure compliance with health and safety regulations * Use basic hand and power tools safely Required experience - • Basic understanding of electrical systems * Good practical and manual skills * Ability to follow instructions and work as part of a team * Strong attention to detail * Physically fit Kinetic plc is a Recruitment Consultancy with over 40 years' experience delivering staffing solutions to the engineering, manufacturing and technical industries. Kinetic plc treats all applications confidentially and we review all submissions. Those that do not meet the specification may not be contacted but their CV retained to be considered against future opportunities. IND1

Concrete Finisher Agency: Search Consultancy Location: Sunderland Search Consultancy is looking for a skilled Concrete Finisher to join our busy civils and construction teams across Sunderland. We are partnering with leading Tier 1 contractors and major groundworks firms who require "smooth and precise" experts capable of handling high-spec pours and structural finishing at a fast pace. If you are a Finisher who thrives in a high-volume environment and can move seamlessly from initial screeding to intricate power floating and curing, we have immediate starts and long-term runs of work available now. The Role * Slab & Floor Finishing: Executing high-quality finishing on large-scale floor slabs, including screeding, floating, and trowelling to strict tolerances. * Specialist Finishes: Expert application of brush, tamping, and power float finishes, as well as decorative or exposed aggregate work where required. * Formwork & Edging: Setting up and stripping shuttering, installing expansion joints, and ensuring all edges and corners are sharp and structurally sound. * Surface Preparation: Monitoring concrete consistency (slump) and managing the timing of the "finish" based on weather conditions and pour rates. * Productivity Driven: We need Finishers used to the intensity of large-pour days who can keep the program on track while maintaining a "handover-ready" aesthetic. Requirements * Qualifications: NVQ Level 2 in Concrete Finishing or relevant trade experience. * CSCS Card: A valid Blue or Gold card is mandatory. * Experience: Proven track record in commercial groundwork's, industrial flooring, or large-scale civil engineering projects. * Tools & PPE: Full professional finishing kit (hand floats, edgers, etc.) and standard 5-point PPE. * Reliability: Ability to handle early starts and stay until the pour is successfully finished and "gone off." * Right to Work: Must have a valid right to work in the UK. Why Work With Search? * Steady Pipeline: We work with the biggest names in North East construction; when one site finishes, we aim to move you straight to the next project in Sunderland. * Weekly Pay: Reliable, on-time payments every Friday via CIS, PAYE, or Umbrella. * Wearside Experts: Our dedicated construction desk ensures you stay busy on local sites across Sunderland and the surrounding areas. Search is an equal opportunities recruiter and we welcome applications from all suitably skilled or qualified applicants, regardless of their race, sex, disability, religion/beliefs, sexual orientation or age

The Rewards and Benefits on Offer: • Immediate start available, • Competitive salary and benefits package, • Collaborative and supportive work environment, • Free onsite parking, • Generous holiday allowance MTrec’s New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Electronics Validation/Test Engineer to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway. If you have experience within the electronics sector as a Test, Validation, Compliance or Approvals Engineer or similar, apply now for an immediate response! The Job You’ll Do: • Specialising more in the regulatory compliance side of getting a product approved., • Testing products to ensure they meet all of the regulatory requirements needed for CE and UL certification, • Read, understand, keep updated on all relevant regulatory standards relevant to our product ranges and desired applications (EMC standards, Electrical safety standards, Functional safety standards, UL/CSA), • Development requirements to design and test products, • Understand the regulatory test methods/conditions and create test cases to be performed on our products, • Create test plans, • Organize and pull together all equipment, loads, wiring etc. needed to perform the tests., • Set up and perform the testing, • Occasional travel for final full compliance testing when using an external test house, • Capture all test results and create traceability reports, determining pass/fail status, • Liaise with external test houses and/or approval bodies to discuss/plan and quote blocks of compliance testing., • Commission, Debug electronic circuits, components and PCB assemblies for new product development and projects., • Design, setup and run tests to ensure the design meets specifications., • Maintain records and documentation on all tests and analysis., • Use industry standard development systems to achieve traceability and cross referencing, • Work within a small design team to complete assigned objectives., • Troubleshoot circuits from prototypes, development, and customer returns., • Be the key interface for overall system validation and alignment on test plans, • Work with Engineering to improve validation tests and to define criteria for entry into Validation phase., • Establish a disciplined reporting and communication dashboard of project risks & status with respect to quality and readiness for release., • Improve the scope and coverage of automated tests About You: Bachelor’s degree or equivalent (preferably with bias towards power electronics). 3 years hands-on experience in a Test and/or QA Validation, Compliance or Approval role at system level Experience of regulatory standards and test methods for Electronics product validation/compliance/approvals Practical competency in working with external test houses and practical test experience. EMC, Water ingress, vibration, environmental testing experience Able to carry out practical testing as well as planning and documentation Experience of working with power electronic systems Knowledge of switching power converters. Knowledge of circuit analysis, and design of experiments. Knowledge and experience in applicable product regulatory standards Willingness to travel to external test laboratory’s occasionally PC literate with experience in MS Office and databases (good and thorough documentation skills)

The Rewards and Benefits on Offer: • Immediate start available, • Competitive salary and benefits package, • Collaborative and supportive work environment, • Free onsite parking, • Generous holiday allowance MTrec’s New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Systems Project Manager to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway. If you have experience within a Project Management role or similar, apply now for an immediate response! The Job You’ll Do: • Plan, coordinate, lead, and monitor the design and launch of product development initiatives, including motors, system controllers, embedded software, support products, and customer-specific projects., • Collaborate directly with customers, sales teams, and product management to define requirements, develop solutions, and provide ongoing product support., • Develop and manage project cost estimates and schedules, ensuring deliverables are completed within approved budgets and timelines., • Facilitate regular project status meetings and design reviews, providing clear and accurate progress reports to management., • Oversee and support the work of design engineers assigned to the project., • Drive projects through all required stages, • Maintain comprehensive project documentation, • develop detailed engineering specifications., • Identify and implement improvements to enhance the project development process., • Support test engineering in defining initial production test equipment requirements and procedures., • Collaborate with manufacturing and test teams to troubleshoot and resolve design-related issues encountered during production. About You: • Qualified to Degree level or above Bachelors degree and 5+ years relevant industry experience., • 3+ years project leadership experience ideally within power electronics or embedded control products., • Demonstrate general management skills., • Demonstrated understanding of electronics, software development and mechanical design., • Demonstrated project planning, leading, organizing and tracking skills., • Demonstrated knowledge of good engineering practice and experience of following Product Development Cycles, • Effective verbal and written communication skills as well as excellent interpersonal skills., • Accuracy and good organizational skills

The Rewards and Benefits on Offer: • Immediate start available, • Competitive salary and benefits package, • Collaborative and supportive work environment, • Free onsite parking, • Generous holiday allowance MTrec’s New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Senior Project Lead to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway. If you have experience within a Senior Project role or similar in a relevant industry, apply now for an immediate response! The Job You’ll Do: • Plan, coordinate, lead, and monitor the design and launch of product development initiatives, including motors, system controllers, embedded software, support products, and customer-specific projects., • Collaborate directly with customers, sales teams, and product management to define requirements, develop solutions, and provide ongoing product support., • Develop and manage project cost estimates and schedules, ensuring deliverables are completed within approved budgets and timelines., • Facilitate regular project status meetings and design reviews, providing clear and accurate progress reports to management., • Oversee and support the work of design engineers assigned to the project., • Drive projects through all required stages, • Maintain comprehensive project documentation, • develop detailed engineering specifications., • Identify and implement improvements to enhance the project development process., • Support test engineering in defining initial production test equipment requirements and procedures., • Collaborate with manufacturing and test teams to troubleshoot and resolve design-related issues encountered during production. About You: • Qualified to Degree level or above Bachelors degree and 3+ years relevant industry experience., • Experience within power electronics or embedded control products - desirable, • Demonstrated understanding of electronics, software development and mechanical design., • Demonstrated project planning, leading, organizing and tracking skills., • Demonstrated knowledge of good engineering practice and experience of following Product Development Cycles, • Effective verbal and written communication skills as well as excellent interpersonal skills., • Accuracy and good organizational skills

We require an experienced mechanical/assembly fitter to work in a small manufacturing team to assemble and maintain bespoke road repair machinery. As part of the role you will be involved in New Machine Builds for both our own fleet and external customers, as well as helping to maintain our fleet of 25 vehicles to ensure they are safe, reliable and fit for purpose. Our fleet operate all over the country, and on occasion you may be asked to travel to support a machine breakdown. Qualifications and Skills Recognised qualification or suitable experience in mechanical fitting/assembly An ability to read and understand engineering drawings. Good general knowledge of mechanical principles with a logical approach to effective fault finding and rectification Experience of using hand tools, basic marking out and drilling, light grinding and dressing. Experience of troubleshooting mechanical systems, performing preventative maintenance and working with a continuous improvement mentality. Good communication and motivational skills are required and flexibility. UK driving license required HGV license would be an advantage Basic IT skills using Microsoft office required Experience with small diesel/petrol engines, compressors and high volume blowers would be a distinct advantage Experience of hydraulics and pneumatics would be a distinct advantage Key Responsibilities Primarily assembling new road repair machinery and integrating the machinery onto HGV vehicles General factory maintenance/housekeeping Work alongside the wider engineering team to solve engineering problems and develop systems Identify and accurately describe build issues and discuss solutions with the engineering team Plan, manage and take on responsibility for tasks allocated by workshop supervisor Liaise with customers and other departments on machine breakdowns and faults Be prepared to repair machinery both on and offsite Rectify faults by repairing, replacing and testing Record relevant information on repair work undertaken Train new colleagues as required A willingness to take on roles outside of those listed above to support other areas of the business Other Attributes Be a highly self-motivated individual, able to work under your own initiative Undertake training where necessary Adhere to the Correct and safe use of power tools and workshop equipment Maintain an awareness of health & safety requirements Be aware of the need for risk assessments prior to carrying out any task Be flexible to work overtime and some weekends

The Rewards and Benefits on Offer: Immediate start available Competitive salary and benefits package Collaborative and supportive work environment Free onsite parking Generous holiday allowance MTrecs New Opportunity: MTrec Technical are proudly representing our prestigious engineering client in their 2026 recruitment initiative with the recruitment of a permanent Electronics Validation/Test Engineer to strengthen their team. This is an excellent opportunity for an individual who is looking to expand their knowledge and skills within an industry leading employer, with a defined progression pathway. If you have experience within the electronics sector as a Test, Validation, Compliance or Approvals Engineer or similar, apply now for an immediate response! The Job Youll Do: Specialising more in the regulatory compliance side of getting a product approved. Testing products to ensure they meet all of the regulatory requirements needed for CE and UL certification Read, understand, keep updated on all relevant regulatory standards relevant to our product ranges and desired applications (EMC standards, Electrical safety standards, Functional safety standards, UL/CSA) Development requirements to design and test products Understand the regulatory test methods/conditions and create test cases to be performed on our products Create test plans Organize and pull together all equipment, loads, wiring etc. needed to perform the tests. Set up and perform the testing Occasional travel for final full compliance testing when using an external test house Capture all test results and create traceability reports, determining pass/fail status Liaise with external test houses and/or approval bodies to discuss/plan and quote blocks of compliance testing. Commission, Debug electronic circuits, components and PCB assemblies for new product development and projects. Design, setup and run tests to ensure the design meets specifications. Maintain records and documentation on all tests and analysis. Use industry standard development systems to achieve traceability and cross referencing Work within a small design team to complete assigned objectives. Troubleshoot circuits from prototypes, development, and customer returns. Be the key interface for overall system validation and alignment on test plans Work with Engineering to improve validation tests and to define criteria for entry into Validation phase. Establish a disciplined reporting and communication dashboard of project risks & status with respect to quality and readiness for release. Improve the scope and coverage of automated tests About You: Bachelors degree or equivalent (preferably with bias towards power electronics). 3 years hands-on experience in a Test and/or QA Validation, Compliance or Approval role at system level Experience of regulatory standards and test methods for Electronics product validation/compliance/approvals Practical competency in working with external test houses and practical test experience. EMC, Water ingress, vibration, environmental testing experience Able to carry out practical testing as well as planning and documentation Experience of working with power electronic systems Knowledge of switching power converters. Knowledge of circuit analysis, and design of experiments. Knowledge and experience in applicable product regulatory standards Willingness to travel to external test laboratorys occasionally PC literate with experience in MS Office and databases (good and thorough documentation skills) TPBN1_UKTJ

Department: Production Location: Sunderland Job Title: Production Operator Salary: £25,817 rising to £28,267 after 1-year service (plus 12%-30% shift allowance) + company benefits Working hours: Full Time Contract type: Fixed term contract Reports to: Production Supervisor Job Purpose: You will play a crucial role in the manufacturing process of EV batteries in a brand new manufacturing giga-plant based in Sunderland. Working as part of the Production Team you will be responsible for the efficient and safe operation of manufacturing equipment and processes to produce high quality products. This is an exciting opportunity to work as part of a team and be involved in all areas of the battery manufacturing process for the UK’s largest lithium-ion battery producer. Responsibilities: * Operate and monitor complex machinery and production equipment * Perform complex assembly work in various areas of the production process * Conduct quality checks throughout the production process * Responsible for TPM (total product maintenance) * Perform first line maintenance * Suggest and participate in continuous process improvement * Follow verbal and written instructions for specialised equipment * Maintain company and personal targets * Follow health & safety guidelines and procedures * Undertake any other duties as reasonably requested by the company * Escalate any issues to shift supervisors Characteristics/Qualifications Required: * Excellent attention to detail * Dependable * The ability to follow written and verbal instructions accurately * Ability to adapt to changing circumstances * Must be willing to learn and develop new skills * Safety conscious * Proven team player About AESC: AESC is a global leader in the development and manufacturing of high-performance batteries for electric vehicles and energy storage systems. Over the past 15 years, AESC has produced power batteries for more than a million EVs across 59 countries, achieving a flawless record of 'zero critical incidents'. AESC's team works continuously to improve the company's global leadership in product development, quality and sustainability. In 2022, AESC was again named among 'Global Tier 1 Battery Companies' by Benchmark, a leading UK-based lithium-ion battery supply chain research organisation. The NRL Group connect global companies with the right people to bring engineering projects to life. Supporting contracting companies with energy transition plans and working with our clients to create a cleaner, greener future. We welcome applications from every walk of life and are committed to diversity within the industries we support, as a certified Inclusive Recruiter and Armed Forces friendly employer. You can ensure you stay safe when job searching online by visiting the JobsAware website

EC&I Technician Full time, Permanent, On site Location – Daldowie Salary £43,459.08 Closing date:20 January Who we are: We’re not just talking about making a difference, we’re making it happen. We generate dispatchable, renewable power and create stable energy in an uncertain world. Building on our proud heritage, we have ambition to become the global leader in sustainable biomass and carbon removals. You’ll be joining our teams of practical doers, future thinkers and business champions. We’re enabling a zero carbon, lower cost energy future for all, and working hard to decarbonise the planet for generations to come. About the role: As an EC&I Technician, you’ll provide electrical, control and instrumentation support to the plant mainly focussed on planned and unplanned maintenance activities. You’ll also provide some support on modification and replacement projects. Based in Uddingston near Glasgow, Daldowie Treatment Works is one of the largest plants of its type in Europe. For nearly 25 years the plant has focussed on creating wdf pellets from sewage sludge reducing environmental impacts as well as creating a new fuel source replacing the need to burn fossil fuels. Day to day you’ll support the process by providing timely repairs to breakdowns and carrying out planned maintenance activities including instrumentation calibrations. You’ll ensure that all work is managed and recorded correctly to maintain compliance, inspiring safe ways of working across the site, setting a high standard of EC&I engineering activity, and supporting in rolling out new processes, systems, and ways of working to your colleagues on site. You’ll be joining a tight knit, dedicated team based on site, who are also part of a larger group with a wide support network. Who we’re looking for: You’ll need to have experience in solving problems and being a strong communicator to be able to persuade and influence others. You should be educated to at least ONC level in Electrical or Instrumentation Engineering and should have served a recognised Apprenticeship. Specifically, you’ll need plant experience in the maintenance, repair and installation of electrical equipment, including but not restricted to, 3 phase motors and associated switchgear, variable speed drives, soft starts, circuit breakers, motor control centres and 3 phase and single-phase distribution systems. You’ll be able interpret schematic drawings, single line diagrams and PLC ladder logic. Ideally, you’ll also have process plant experience in the maintenance, repair, installation and calibration of plant instrumentation and control systems including, but not restricted to, systems for the measurement of temperature, pressure, level, flow, oxygen, and ph. Rewards and benefits: As you help us to shape the future, we’ve shaped our rewards and benefits to help you thrive and support your lifestyle. If successful in this role you’ll get: · A discretionary bonus depending on company performance · SAYE (Sharesave): discretionary scheme from time to time · Personal accident cover · Group personal pension plan · Holiday - 36 days · Reimbursement of the cost of your annual membership of one relevant and appropriate professional body We’re committed to making a tangible impact on the climate challenge we all face. Drax is where your individual purpose can work alongside your career drive. We work as part of a team that shares a passion for doing what’s right for the future. With Drax you can shape your career and a future for generations to come. Together, we make it happen. At Drax, we’re committed to fostering an environment where everyone feels valued and respected, regardless of their role. To make this a reality, we actively work to better represent the communities we operate in, foster inclusion, and establish fair processes. Through these actions, we build the trust needed for all colleagues at Drax to contribute their perspectives and talents, no matter their background. Find out more about our approach here. How to apply: Think this role’s for you? Click the ‘apply now’ button to begin your Drax journey. If you want to find out more about Drax, check out our LinkedIn page to see our latest news. We understand that you may have some additional questions about the role. If you’d like to have a confidential chat to discuss the role in more detail, please email (email address removed) We reserve the right to close roles early when the particular role and / or location has had sufficient applications

Project Manager – Cable Engineering (Asset) Location: North-East England Contract Type: Full-time, Permanent Salary: Up to £52.5k + Company Vehicle + Flexible Benefits Freedom has an exciting opportunity for a Project Manager to lead the delivery of our Cable Engineering Services contract with Northern Powergrid, focusing on Asset Replacement. You’ll ensure safe, efficient, and high-quality delivery of projects across the region. Some of the key deliverables in this role will include: Oversee day-to-day operations for Asset Replacement work, ensuring delivery on time and within budget. Lead and motivate a team of Field Managers, Supervisors, Planners, Engineers, and Operatives. Act as the main point of contact with Northern Powergrid and maintain strong client relationships. Ensure compliance with HSQE policies and legal requirements. Manage multiple projects from planning to energisation and handover. Allocate resources effectively and monitor performance against KPIs. Ensure timely submission of documentation and liaise with stakeholders. What We’re Looking For: Experience in a senior operational role within cable installation, utilities, or power distribution. Knowledge of LV/HV cable networks, ideally in a DNO environment. Strong leadership, client management, and commercial awareness. NEBOSH/IOSH or equivalent Health & Safety qualification. Full UK Driving Licence. Desirable: Experience with Northern Powergrid contracts. Streetworks knowledge. Project Management qualification (e.g., PRINCE2, APM). Benefits: Pension with a leading provider and up to 8% employer contribution 25 days Annual Leave + Bank Holidays Salary sacrifice car scheme (Hybrid/Electric Vehicle) Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax Free Bikes Personal development programme Next Steps: As a business, we’re on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation. We’ll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met. About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training. Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be. #Freedom #LI-RF1 #LI-onsite