Troubleshooting jobs in Newcastle Upon TyneCrear alertas

Position: Electronics Technician Location: Newcastle Salary: £30,000 – £40,000 (DOE) An established electronics business based in Newcastle is seeking an Electronics Technician to join its highly skilled engineering team. The company delivers bespoke electronic solutions to global customers and offers a supportive, hands-on working environment where variety, learning, and technical challenge are part of everyday life. The Role As an Electronics Technician, you will play a key role in the testing, verification, and support of electronic products. You will work across system, module, and sub-assembly level, using a wide range of hardware and software tools to ensure product quality and performance. The role includes stress, thermal, and performance testing, alongside supporting the verification of embedded firmware and bespoke test software. You will also provide technical support to customers, both remotely and on-site, helping to diagnose and resolve electronic and system-level issues. In addition, you will be responsible for maintaining accurate documentation, including engineering test records and reports, while supporting quality control activities and continuous improvement initiatives across the business. Required Skills & Experience • Practical experience testing electronic systems, modules, or sub-assemblies, • Ability to use electronic test equipment (e.g. oscilloscopes, multimeters, power supplies), • Understanding of electronic circuits and components, • Experience supporting fault finding and troubleshooting at hardware level, • Basic understanding of embedded firmware and test software verification, • Ability to produce clear technical documentation and test reports, • Strong problem-solving skills and attention to detail, • Willingness to support customers both remotely and on-site when required Qualifications • HNC or higher in Electronics or a related discipline (preferred), • Equivalent hands-on industry experience will also be considered About You The business is open to applications from bright graduates with a strong interest in electronics through to experienced Electronics Technicians. A practical mindset, enthusiasm for electronics, and a proactive approach to learning are key to success in this role. What’s on Offer • Supportive and collaborative working environment, • Exposure to bespoke and technically varied projects, • Ongoing training and development opportunities, • Flexible and friendly company culture, • Opportunity to grow and progress within the business If you are ready to take the next step in your career as an Electronics Technician, please apply today with an up-to-date CV.

Company Overview At Pointer, we don’t just offer jobs—we build careers. With over 50 years of excellence in electronic security and fire detection, we are a dynamic, values-driven company that thrives on passion, respect, integrity, delivery, and expertise. Our mission is to build a robust, resilient, sustainable, and successful business that supports our customers and colleagues through good times and bad. Our 200-strong team across the UK is the heart of our success, contributing to our £24 million annual revenue and delivering outstanding service to some of the UK’s top blue-chip companies. Many of our colleagues have grown with us, thanks to our well-established apprenticeship program and a culture that nurtures long-term career development. What sets us apart? Our people-first approach. We foster an environment where every individual is valued, supported, and empowered to succeed. As an Investors in People Gold-accredited employer, we are committed to achieving Platinum status, ensuring our people have the tools, training, and opportunities to thrive. At Pointer, you’ll be more than just a colleague —you’ll be part of a team that delivers with expertise, acts with integrity, and shares a passion for making a difference. If you’re looking for a place to grow, innovate, and be valued, we’d love to hear from you. Job Summary Pointer Ltd. are recruiting for a skilled and motivated Security Engineer to join our team. In this role, you will be responsible for the installation, testing, and commissioning of alarm systems according to technical designs and industry standards. You will also perform regular maintenance and inspections, troubleshoot system faults, and provide solutions to prevent false or unwanted alarms. You will play a crucial role in ensuring compliance with safety regulations, maintaining system performance, and fostering strong relationships with clients, suppliers, and subcontractors Key Responsibilities: • Install, test, and commission alarm and security systems, such as; intruder, access control, fire and IP CCTV, according to technical designs and industry standards., • Perform routine inspections and planned maintenance activities to ensure optimal functionality of security alarm systems., • Fault-find, troubleshoot, and repair system malfunctions, identifying and addressing causes of false or unwanted alarms., • Provide expert technical training and support to clients and internal team members, enhancing knowledge and system performance., • Ensure compliance with security industry standards and codes, guaranteeing all systems are installed and maintained to meet legal and regulatory requirements., • Manage project timelines and budgets, ensuring that all installations and maintenance are completed within agreed time and financial constraints., • Complete and submit all necessary documentation, reports, and system updates in a timely manner, adhering to company protocols. Who are you You are highly technical, detail-oriented, and dedicated to maintaining high industry standards. You should be proactive in troubleshooting and resolving issues, with a strong focus on ensuring client satisfaction. You have a problem-solving mindset, excellent communication skills, and the ability to work independently or as part of a team are essential. You need to be adaptable, willing to learn, and committed to continuous professional development. A strong sense of responsibility and reliability, combined with the ability to work under pressure and meet deadlines, will make you a great fit for this role Required Experience & Qualifications • At least 5 years of demonstrable experience in the security industry is preferred, though relevant experience in similar fields may also be considered., • In-depth technical expertise in security systems and designs., • Good understanding of health and safety practices, including risk assessments and method statements., • Relevant electrical installation training or qualification., • Knowledge of Honeywell, Siemens, and Hochiki fire alarm systems (training provided for the successful candidate)., • Current full driving license., • Must be eligible to work in the UK. Benefits: At Pointer, we don’t just offer a job — we offer a rewarding career with benefits that support your growth, well-being, and work-life balance. Here’s what you can look forward to: Financial Security & Rewards • Competitive salary with an annual review, • Company pension to help secure your future, • Generous holiday allowance to recharge and unwind, • Career progression opportunities—we invest in your future, • Bi-annual career mentoring, • Life assurance for peace of mind, • Access to private GP services—because your health matters, • Employee discount scheme—save on top brands, • Company car* for eligible roles *Some benefits are role dependent. Equal Opportunities Statement: Pointer is an equal opportunity employer and values diversity. We welcome applicants from all backgrounds.

If you're an SMT Production Engineer who's passionate about making a real-world impact, we want to hear from you!. We're looking for someone with a positive, can-do attitude, excellent communication skills, and the ability to work effectively in a fast-paced production environment. Troubleshooting a

Senior Real-Time Software Engineer Hybrid, Newcastle We’re hiring on behalf of a leading engineering organisation working at the cutting edge of defence technology. This newly created role sits within a multi-disciplinary R&D team solving complex, real-world problems through robotics, automation and intelligent systems. If you’re a software engineer who wants to see your code power physical systems in demanding environments, this is your opportunity. What You’ll Be Doing • Designing and developing real time software in C/C++, Python or Java, • Integrating code with electronics and mechanical systems, • Supporting testing and commissioning of new products, • Collaborating across engineering disciplines, • Reviewing and validating code from peers, • Documenting requirements and troubleshooting guides, • Occasionally travelling to customer sites (UK and overseas) What You’ll Bring • Degree in Software Engineering, Computer Science, Physics or Maths (2:1 or above), • Expertise with C++ and Python is essential, • Experience with Linux and real-time software development, • Expertise with robotics, automation or machine control, • Basic electronics knowledge and ability to read schematics, • Familiarity with ROS, OpenCV, machine learning or PLC software is a plus, • Eligibility for UK defence security clearance What’s On Offer • Up to 45% cash bonus, • relocation package, • 25 days holiday + bank holidays (option to buy 5 more), • 16% pension, • Private medical and permanent health insurance, • Free lunch and onsite parking, • Enhanced family leave and paid professional memberships, • Early Friday finish. This is a permanent, full-time, hybrid role Ready to take your software skills into the real world? Apply now to explore the full brief and next steps.

Job Advert: Technology Solution Specialist - Newcastle Are you a tech enthusiast with a passion for delivering cutting-edge solutions? We're on the lookout for a skilled Technology Solution Specialist to join a dynamic team and provide expert support across Microsoft 365, Networks, and Servers for high-end clients across the North East. What You'll Be Doing: • Leading and managing project implementation for a variety of technology solutions, focusing on Microsoft 365, Network infrastructures, and Server configurations., • Collaborating with internal teams and clients to design, plan, and execute seamless technology solutions tailored to the client's needs., • Providing hands-on technical expertise to ensure smooth delivery, troubleshooting, and optimization of systems., • Working across a range of industries with high-profile clients to deliver exceptional results and exceed client expectations. What We're Looking For: • Strong technical experience in Microsoft 365, Networking, and Servers., • Proven track record of successful project implementation with a focus on technology solutions., • Ability to communicate effectively with both technical and non-technical stakeholders., • A problem solver who thriv...

AD Energy is seeking a Technical Service Support Engineer on behalf of a global manufacturer in the photovoltaic industry! Our client offers their intelligent and smart solar solutions to the residential and commercial markets, the business continues to have a with a strong international presence and pushes towards further innovation, ensuring that they remain one of the world-wide suppliers of choice! This position is a new role- an addition to the current international after sales service team across Europe. The key duties of this role will be: • To identify technical problems remotely and then provide relevant advice and solutions, • You will also manage the technical service escalation queries and processes via online and system portals, • You will become a vital member of the technical service team to ensure that technical customer service care is high quality for all local business partners and end customers Candidates of interest must demonstrate: • A technical affinity for solar products and have worked in a service / after-sales technical support function with grid connected solar or energy products, • You must speak fluent English Key Responsibilities: • Be the first point of contact for solar pv clients and customers (end-users, installers, contractors, distributors, and wholesale partners) regarding product and technical matters, • Attend to hotline, first-line help desk support queries, • Receive and manage escalated technical error report and inquiries from hot desk (tier 1), • Work to find solutions for escalated technical error report, • Process and monitor errors and inquiries in 2nd Level support capacity, • Attend to direct higher-level technical and service- issue customer requests, • Log any customer complaints and provide feedback and solutions, • Work closely with R&D on more complex technical matters, • Assist and help Tier 1 Engineers if required, • Ensure client communication throughout case and inquiry process with all parties, • Document all cases, inquires, developments, changes, and resolutions on the internal database, • Conduct follow up duties with customers, • Ensure and promote great after sales service and customer satisfaction, • Be an advocate of the company growth plan and product profile Key Skills & Experience: • Possess a technical degree in a related field such as power, renewables, solar, photovoltaics, electrical engineering, • Experienced background or have completed a vocational training course in Electronics or Electrical Engineering, Grid Power, or Smart Energy Technologies, or Renewables, • You must have a strong working knowledge of providing technical, after-sales, customer service support and guidance for solar electronic, solar technology, or pv kits, • You must have experience and enjoy working with clients over the telephone on technical product issues within a help desk, call centre or technical hotline environment, • Remote technical troubleshooting and ticketing experience, • A keen interest in developing technologies within the solar pv sector, existing Solar knowledge is necessary, • Have a communicative nature and fantastic interpersonal skills, • Can work well in a team setting but also a proactive and independent person, • Able to diligently communicate over emails and online chat, • Possess a strong business and phone acumen, • Highly proficient in all Microsoft Office package, • Must be fluent in English, • You are willing to learn and enthusiastic about taking on new challenges Should you fulfil the essential criteria for this job and wish to be considered for this role, please submit your up-to-date CV and cover letter to:

Contract : DevSecOps Engineer : 3 months (rolling) : £550 per day Inside IR35 : 90% Remote (occasional travel - North England) We’re partnered with a fast-growing data and AI consultancy supporting a high-profile AI Lab environment within a secure, enterprise setting. They’re looking for a DevSecOps Engineer to help scale and support a shared AI/LLM platform used across multiple projects, enabling teams to deploy, run, and operate production-grade LLM applications efficiently. You’ll be joining a central platform team owning the core infrastructure behind a rapidly expanding AI capability. What you’ll be doing: • Supporting and scaling a shared AI platform running multiple LLM-based projects, • Owning and maintaining Linux-based infrastructure and containerised services, • Operating and troubleshooting Dockerised services (PostgreSQL, Qdrant, vLLM, LLDAP), • Managing NGINX reverse proxies to securely expose internal tools and front ends, • Supporting and evolving GitLab CI/CD pipelines, • Deploying and managing infrastructure using Terraform, • Supporting open-source LLM deployments (Hugging Face models, vLLM, LangChain) Required skills: • Proven experience in DevOps / Platform / Infrastructure Engineering, • Strong Linux experience (VMs, shell scripting), • Hands-on Docker experience in production environments, • CI/CD experience, ideally GitLab, • Experience with NGINX or similar reverse proxies, • Infrastructure-as-Code experience (Terraform preferred), • Python experience supporting backend or platform services, • Experience supporting production systems used by multiple teams Security: • Must be ITAR compliant., • Ideally you already have SC but this can be sorted if necessary. On offer: • Day rate: £550.00 Inside IR35, • Duration: 3 months (rolling), • Working Style: Remote/Hybrid - Needs be visits - North England Please note: Due to the high volume of applications, unfortunately, we may not be able to provide feedback to all applicants. Contract : DevSecOps Engineer : 3 months (rolling) : £550.00 per day Inside IR35 : 90% Remote (occasional travel - North England)

66kV WTG Authorised Person (AP) £650 a day + offshore benefits + flights and accommodation Offshore Wind Farms, Taiwan Long-term outside IR35 contract (12 months minimum) | Full-time | Rotational shifts We’re seeking experienced 66kV Wind Turbine Generator (WTG) Authorised Persons (APs) to support our client's offshore wind operations across Taiwan. This is a safety-critical role for highly competent HV professionals with proven experience operating as a 66kV AP on Siemens Gamesa wind turbine platforms. Key Responsibilities • Act as the 66kV Authorised Person (AP) for Wind Turbine Generator (WTG) electrical systems, • Perform, control, and document HV switching, isolation, earthing, and re-energisation activities, • Issue and receive Permits to Work (PTW), Sanctions for Test (SFT), and Limitations of Access (LOA), • Ensure full compliance with Siemens Gamesa HV rules, electrical safety procedures, and site standards, • Interface professionally with Ørsted, Siemens, client representatives, and site management, • Support commissioning, fault response, troubleshooting, operations, and HSE activities Mandatory Authorisations & Certifications • Valid Siemens Gamesa 66kV WTG Authorised Person (AP) status, • Valid HV Switching authorisation (ideally Orsted) Training & Competency Requirements • Completion of the full Siemens Gamesa 66kV AP Training Matrix, • Siemens Gamesa HV Electrical Safety Rules and Control of Work / PTW training, • 66kV WTG switching, isolation, earthing, and access procedures, • HV Authorised Person / Senior Authorised Person modules (as applicable), • WTG-specific HV systems training for relevant turbine families, • Valid GWO certifications (all in date) Key Skills and experience: • Minimum 3–5 years’ experience working with HV systems at 66kV or above, • Proven experience operating as a WTG Authorised Person on Siemens Gamesa platforms, • Offshore wind farm experience strongly preferred, • Experience ideally working under Ørsted electrical and safety governance or similarly aligned, • Strong understanding of HV safety principles, risk management, and procedural compliance, • Ability to remain calm, focused, and effective in safety-critical and high-pressure environments, • Excellent communication skills when working within multicultural offshore teams, • High levels of discipline, accuracy, and flexibility, including willingness to work offshore rotational schedules What you get in return: • £650 day rate plus offshore benefits (negotiable and paid in GBP), • Fully expensed flights and accommodation, • A minimum 12 month contract (work estimated up to 18 months with potential for extension), • Work on large-scale offshore wind farms in Taiwan, • Structured safety-focused environment with clear procedures and governance This company is an equal opportunity employer and values diversity. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Interested? Please submit your CV to Meg Kewley at DCS Engineering via the link provided. Alternatively, email me at or call 0161 212 2308

ABOUT US ___, part of Capgemini, tackles the hardest work in data for the world’s largest organizations. We combine intelligent software with deep data expertise to help the Fortune2000 tackle complex data challenges and drive measurable business outcomes with business-ready data. Syniti’s Data First strategy transforms data from an afterthought into a strategic asset—unlocking insights, reducing risk, and fueling growth. With over 5,000 successful projects, we support the full data lifecycle through a unified platform for migration, quality, replication, matching, master data management, analytics, governance, and strategy. Operating globally across industries, Syniti’s award-winning software, expert consultants give enterprises a unique edge in managing and maximizing their data. Syniti’s cloud-native platform sets new standards in enterprise data management, combining powerful SaaS solutions with deep domain expertise. Designed for agility and scale, our technology helps customers accelerate digital transformation, drive innovation, and make confident decisions with trusted data. Every product enhancement is built to solve real business challenges—empowering organizations to unlock value from their data faster and more effectively. THE ROLE The Senior Engineer is highly engaged in the successful installation, configuration, and technical leadership of Syniti software solutions. This role requires a deep understanding of Syniti's data migration and data quality tools, as well as the ability to perform complex technical tasks to support data projects. The Senior Engineer will work closely with project managers, business analysts, and client stakeholders to ensure that Syniti solutions are implemented effectively and efficiently. WHAT YOU WILL DO 1. Installation and Configuration: · Participate in the installation and configuration of Syniti software solutions, ensuring alignment with project requirements and technical specifications. · Collaborate with IT teams to prepare the environment for Syniti solution deployment, including hardware and software prerequisites. 2. Technical Support: · Provide technical support to the project team, ensuring best practices in data migration and data quality are followed. · Develop and maintain technical documentation, including architecture diagrams, configuration guides, and troubleshooting procedures. 3. Project Management Support: · Work closely with project managers to define project scope, timelines, and deliverables. · Assist in the development of project plans and schedules, ensuring technical tasks are accurately represented. 4. Stakeholder Engagement: · Engage with client stakeholders to understand their business requirements and translate them into technical solutions. · Participate in technical workshops and presentations to demonstrate Syniti solution capabilities and project progress. 5. Continuous Improvement: · Stay updated with the latest Syniti product releases and enhancements, incorporating new features into project solutions where applicable. · Identify opportunities for process improvements and implement changes to enhance project delivery and client satisfaction. WHAT IT TAKES · 3+ Years of experience in IT Services Delivery, with strong emphasis on server configuration, support, and troubleshooting. · Bachelor’s degree in Computer Science, Information Technology, or a related field. · Familiarity with data integration tools and techniques. · Advanced experience with SQL Server, SAP HANA, and/or Postgres database management. · Excellent problem-solving skills and the ability to troubleshoot complex technical issues. · Proven experience in leading technical teams and managing client relationships. · Strong English communication skills, both written and verbal, with the ability to convey technical concepts to non-technical stakeholders. · Extensive experience with Syniti software solutions, particularly in installation and configuration. · Strong understanding of data migration methodologies and data quality principles. · Certification in Syniti solutions or related technologies. · This position may require travel to client sites for project implementation and support. · The role may involve working outside of standard business hours to meet project deadlines or address critical issues. Be fully aligned with our core values: • Think Big - Be courageous and bold. Aspire to greatness. Relentlessly pursue market innovation. Set the standard by which others follow. Create solutions that have a meaningful impact. Solve the challenges our customers don’t know they have., • Be Curious - Be a lifelong learner. Seek out new ideas to serve customers. Understand our competition and the world. Be permanently dissatisfied with the status quo. Challenge preconceptions. Focus on the future rather than yesterday., • Take Action - Be the first. Don’t wait. Take accountability. Inspire others by doing. Fail fast and learn from mistakes. Make a difference every day., • Stronger Together - Respect, trust and look out for each other. Celebrate diverse perspectives. Listen. Build connections and belonging. Act with integrity. Give back. One Syniti family. WHAT WE OFFER • Trust that you are proficient at what you do. At Syniti, you will find a supportive environment and access to learning tools, but micromanagement is not our thing., • Growth. We are growing rapidly and steadily solving the biggest challenges enterprise companies are faced with today. There was never a better time to join and grow with us. Most importantly, you will have the chance to shape our journey and share in our success story., • Support. We all rely on each other and enable each other to be successful. You won’t stand alone., • Curiosity and genuine interest in you. We all have our different stories, all equally fascinating, with each depicting a different journey, and we want to hear them all., • Recognition. We are the sum of individual achievements, and we always take the time to celebrate them., • An open organisation. Hierarchies are not our thing, and access is something we make sure of across the board. We are a family where everyone is just as important, everyone’s work is seen, and ideas are valued. OUR COMMITMENT TO INCLUSION At Syniti, we’re committed to creating a respectful, inclusive, and fair workplace where everyone belongs and thrives. We believe that diverse perspectives make us stronger — and we value the unique backgrounds, experiences, and voices each person brings to our team. We welcome applicants based on their skills and potential, and we’re dedicated to ensuring equal opportunities for all, regardless of personal background. If you need accommodations during the hiring process, please let us know — we’re here to support you.

Senior Performance Engineer - UK Ready to Make a Real Impact? Join e-STORAGE! Who We Are Welcome to e-STORAGE, a proud member of the Canadian Solar Inc. (NASDAQ: CSIQ) family! We’re leading the way in designing, building, and integrating advanced battery energy storage systems for utility-scale projects. Our mission? To accelerate the world’s renewable energy transition and create a more sustainable, resilient energy future for everyone. With our innovative SolBank lithium-iron phosphate battery technology and comprehensive project services, we’re not just building products we’re powering communities and making a difference worldwide. Role Overview for Senior Performance Engineer In this role, you’ll bring together the sharp analytical mindset of a controls engineer and the hands‑on problem‑solving instincts of a commissioning engineer to efficiently troubleshoot complex issues and pinpoint root causes on operating systems. You’ll take ownership of diagnosing performance challenges and work closely with internal teams and external vendors to drive solutions, validating and evaluating firmware and software updates to ensure system security and reliability, minimizing downtime. Your insights will feed back to internal teams and product improvements to drive a cycle of continuous improvement. If you thrive on tackling new challenges, enjoy rolling up your sleeves, and love the satisfaction of solving problems that matter, this role keeps you continuously engaged and at the center of meaningful, hands‑on innovation. What You’ll Be Doing as a Senior Performance Controls Engineer • Prioritize, investigate, and drive the corrective action for performance issues identified during facility operation., • Troubleshooting and root cause analysis using data analysis, first principles, on site investigation, or other means as needed., • Validate software/firmware updates in coordination with vendors, the site service team, and relevant stakeholders to confirm documented changes and no unintended consequences are introduced. Coordinate subsequent rollouts with the appropriate site service teams., • Effectively communicate issues to the appropriate vendor and stakeholders to ensure resolutions are identified and implemented., • Support performance testing as required under individual contracts for each facility., • Contribute to fleet wide efforts for improving the efficacy of monitoring and analysis processes and tools., • Collaborate with internal teams to provide input to improve performance across the business from applications and design to project execution and commissioning to service., • Provide documentation of issues and resolutions for tracking, knowledge sharing, and internal and external communications., • Ensure all activities are performed in compliance with safety protocols, engineering standards, and company policies. What You’ll Bring to the Position • Demonstrated experience in customer-focused problem solving, • Ability to execute projects and tasks in parallel, self-directed, highly detail-oriented, organized and flexible, • Experience troubleshooting using data analytics, • Experience in commissioning, performance testing, maintenance, and/or design of BESS or other power generating facilities, • Knowledge and experience with SCADA protocols (i.e. DNP3 and Modbus), • Familiarity with industrial communication networks (fiber optics, network switches, TCP/IP, etc.), • Excellent communication skills, • Ability to travel up to 20% of time. Travel may be on short notice, • Demonstrated experience in problem solving What It’s Like to Work Here At e-STORAGE, you’re more than just an employee—you’re part of a team that values your ideas, your background, and your unique perspective. We believe that a culture of equity, diversity, and inclusion isn’t just the right thing to do—it’s the secret to our success. Here, you’ll find: • Integrity: We do what’s right, always., • Innovation: We encourage fresh thinking and bold ideas., • Quality: We take pride in delivering excellence, every time., • Customer Focus: We listen, we care, and we deliver., • Sustainability: We’re passionate about protecting our planet for future generations. Why You’ll Love Working With Us • Join a global leader in renewable energy, backed by over 23 years of Canadian Solar experience., • Work on projects that matter—helping to build a cleaner, greener world., • Thrive in a supportive, collaborative environment where your growth is our priority., • Enjoy a competitive salary and a generous benefits package. Want to join here is what we are looking For • The right mix of education, experience, and skills for the role., • Great communication, teamwork, and problem-solving abilities., • A true commitment to safety, ethics, and sustainability. Your Rewards We offer a competitive salary, performance bonuses, and a comprehensive benefits package—including health coverage, retirement plans, paid time off, and more. Our Commitment to Equality & Diversity “At e-STORAGE, we know that diverse teams drive innovation and better results. We’re committed to creating a workplace where everyone feels respected, valued, and empowered—regardless of age, race, gender, ability, or background. When you join us, you’re joining a community that celebrates your uniqueness and supports your success.” — Libby, Sr. Global HR Manager

Department: Support Reports To: Application Software Support Manager Location: Remote Salary: £55k - £60k /yr (depending on experience) Contract Type: Permanent – Full Time Role Summary We're looking for an experienced full-stack .NET developer to join our team in a new and exciting role. This role will initially be supporting an array of clients, helping our support team to continue to provide an excellent service, whilst maintaining their award-winning systems to ensure reliability. In time, this role is expected to expand to support other additional clients as we introduce 'Managed Services' to our portfolio of service offerings. The ideal candidate will be responsible for handling escalations by our support team, developing and maintaining software applications that meet business needs and delivering exceptional user experiences. Key Responsibilities • Act as an escalation point for the technical support team, resolving complex issues that require advanced troubleshooting and problem-solving., • Diagnose and resolve software-related problems efficiently, ensuring minimal disruption for customers., • When changes are required: analyse, scope, design, develop and test fixes and updates to existing products - following Agile principles and processes, working with the customer/product owner where applicable., • Collaborate with support staff to provide guidance and share best practices for handling technical challenges., • Document solutions and contribute to the knowledge base to improve future support processes., • When support demand is low, assist with other development projects, including coding, testing, and implementing new features or enhancements., • Maintain a strong understanding of QWARE products and underlying technologies to deliver expert-level support. Essential Skills & Experience • Proficiency in C# .NET software development., • Comfortable working on backend (e.g. API) web services, as well as Front-end (UX, Blazor predominantly) web services., • Experience in cloud-based development, solutions and architectures, preferably on Azure., • Strong understanding of software design principles, testing methodologies and Git version control., • Strong skills in database management and familiarity with SQL or NoSQL databases., • Excellent problem-solving and communication skills., • Knowledge Microsoft Azure cloud services. Desirable • Knowledge and experience of Blazor (ASP.Net Core) development., • Knowledge and experience of Microsoft App Services, SQL, Cosmos DB and Azure DevOps. About QWARE We are an award-winning provider of Cloud Solutions and Services, based in Hampshire, UK, with over 25 years of experience. We focus on delivering high-quality, cloud-first solutions to a diverse range of industries worldwide. QWARE is recognized as an industry leader, holding accolades such as the South Coast Tech & Innovation Award for Tech SME of the Year in 2025. With a strong commitment to innovation and value add, QWARE empowers every business user to make smart decisions through innovative, scalable, and user-friendly technology. Benefits • Generous holiday allowance (PLUS your birthday off as an additional day off), • Company Pension, • Death In Service Cover, • Employee Assistance Programme, • Annual Eye test and glasses contribution (for DSE), • Company Profit share scheme, • Training options provided, • Remote working - flexible, where feasible How to Apply

Key Responsibilities • Administer, monitor, and optimize Microsoft SQL Server environments (2016/2019/2022), • Design, deploy, and manage SQL workloads on Microsoft Azure, • Manage and support virtualized environments using Hyper-V, • Implement and maintain backup and recovery solutions using Veeam, • Perform capacity planning, performance tuning, and query optimization, • Manage HA/DR solutions (Always On Availability Groups, Failover Clustering, Azure SQL MI), • Ensure security, compliance, and access controls, • Automate DBA and infrastructure tasks using PowerShell and T-SQL, • Collaborate with infrastructure, DevOps, and application teams, • Support on-prem to Azure migrations and hybrid cloud architectures ☁️ Required Skills & Experience • Strong hands-on experience as a Microsoft SQL Server DBA, • Solid infrastructure background, including:, • Windows Server administration, • Hyper-V virtualization, • Networking and storage concepts, • Proven experience with Azure Cloud, including:, • Azure SQL (IaaS & PaaS), • Azure Virtual Machines, • Azure Storage, Backup, and Monitoring, • Experience with Veeam Backup & Replication, • Expertise in performance tuning, indexing, and troubleshooting, • Strong scripting skills (PowerShell, T-SQL) ⭐ Nice to Have • Experience with Azure DevOps / CI-CD pipelines, • Infrastructure as Code (ARM, Bicep, Terraform), • SQL Server, Azure, or Veeam certifications, • Experience supporting hybrid environments

Cloud Engineer Location: Remote (UK) Contract: 12 months IR35: Outside IR35 The Role We’re looking for a Cloud Engineer to join a small platform team supporting the modernisation of on-prem infrastructure into AWS. You’ll work closely with a senior engineer on day-to-day cloud and infrastructure tasks, helping to support, migrate, and operate hybrid environments. This is a hands-on delivery role, suited to engineers who enjoy working across VMware, AWS, and Kubernetes in real production environments. What You’ll Be Doing • Supporting hybrid cloud environments across on-prem and AWS, • Assisting with VMware to AWS migration activities, • Supporting and operating Kubernetes clusters and containerised workloads, • Working with Infrastructure as Code to provision and manage environments, • Troubleshooting issues across cloud, virtual machines, and Linux/Windows systems, • Collaborating with platform, DevOps, and application teams Experience We’re Looking For • Hands-on experience with VMware (vSphere / ESXi), • Experience working with AWS in production environments, • Exposure to VMware to AWS migrations (preferred), • Working knowledge of Kubernetes (EKS or similar), • Experience with Linux and Windows systems, • Familiarity with Infrastructure as Code tools such as Terraform, Ansible, or Helm If you're interested, please drop me a message and we will arrange a call!

Senior Site Reliability Engineer 📍 UK (remote or hybrid) Join a market leader in unified IT operations, helping IT teams automate, manage, and remediate within a single modern interface. We’re hiring a Senior SRE to scale our client’s platform to support millions of global users. You’ll ensure systems are secure, reliable, and scalable—working with modern cloud tech and a dedicated SRE team. What You’ll Bring: • 10+ years’ experience in Site Reliability Engineer roles, • Expert+ level Linux administration, scripting, and troubleshooting, • Demonstrable knowledge of Observability tools (Prometheus/Grafana, New Relic, Splunk, DataDog), • Comprehensive experience with AWS (Amazon Web Services) and its core capabilities (VPC, EC2, ECS, Route53, Fargate, ALB/NLB distributions, etc), • Extensive experience with cloud automation and infrastructure-as-code (IaC) toolsets, primarily CloudFormation but also including Terraform, Helm and Ansible. CDK a plus., • Good understanding of containers, Fargate, Kubernetes, and overall distributed microservice architectures, • Passionate about automation, security, and self-service environments/portals, • Hands-on experience with CI/CD and SDLC (Software Development Life Cycle) processes Must be based in the UK with no need for sponsorship. Apply now to join a high-impact, platform engineering team!

Job Title: Senior Commissioning Engineer (TP141 desirable) The role involves the commissioning of SCADA and Protection systems across Transmission systems, throughout England. This is an exciting opportunity for a skilled engineer looking to contribute to high-profile power projects. Commissioning of Protection and Control system: • Lead and support the commissioning process for SCS and Protection installations, • Ensure all work is completed in accordance with relevant standards and safety regulations., • Perform testing and fault diagnosis on the Protection and Control system., • Prepare and review commissioning documentation, including test reports and certificates., • Prepare the relevant commissioning folder and schedules., • Work closely with project managers, engineers, and contractors to ensure project timelines are met., • Adhere to all site-specific health and safety procedures and risk assessments., • Document commissioning activities and report progress to management., • Liaise with clients, including National Grid, to ensure successful project delivery, including commissioning panel meetings., • Address any client concerns promptly and professionally. Essential Requirements: • Proven experience in commissioning SCADA and Protection systems, preferably in power transmission projects., • Strong knowledge of electrical systems and controls associated with transmission systems., • Strong knowledge on networking, managed switches, time synch protocols., • Strong knowledge on related functionalities for ATCC, Synchrocheck and other., • Strong knowledge on communication protocols, such as IEC61850., • Experience working on National Grid sites., • Ability to understand and fault find the electrical scheme design., • Valid driver license. Desirable: • National Grid TP141 Authorisation., • Experience working on SCADA systems such as PACiS, DsAgile, GPG, G500., • Experience working on Protection schemes, such as DAR, mesh corner, Feeder, Transformer, Busbar.

A Global Energy company with more than 30,000 employees is seeking an experienced Senior Process Engineer to join its Wastewater Process Engineering Team This is an exciting opportunity to play a key role in designing and optimising wastewater treatment solutions that make a tangible impact on the environment and local communities. About the Role Working as part of a dynamic, multi-skilled team, you’ll provide technical expertise across a range of wastewater treatment projects — from process design and optimisation to operational support on live sites. You’ll be involved in: • Developing process calculations, control philosophies, P&IDs, performance specifications, and commissioning plans., • Leading innovative process design solutions s., • Supporting site operations by improving plant performance, implementing optimisation measures, and troubleshooting treatment processes. About You - We’re looking for a driven and technically strong Engineer with: • A degree in Chemical Engineering (MEng/BEng/BSc) or an equivalent discipline., • 5 experience in the water industry or consultancy environment., • Proven experience in wastewater process design, optimisation, and commissioning support for UK Water Companies., • Chartered status or working towards chartership (desirable)., • Strong analytical skills and a collaborative, problem-solving approach.

About Envision: Envision Energy is a world-leading green technology company that provides renewable energy solutions for global enterprises, governments, and institutions. Encompassing three major business sectors - Smart Wind Turbines, Energy Storage, and Green Hydrogen Solutions, Envision Energy collaboratively constructs comprehensive solutions for energy transformation. Envision Energy has received several accolades for its sustainability performance, including the EcoVadis Gold Medal and the CDP “A-List”. It was also recognized in Fortune's “Change the World” list and ranked among the top 10 smartest companies by the MIT Technology Review. Today, Envision Energy leverages its global network of R&D and engineering centres across China, the United States, UK, France, Germany, Denmark, etc. to continuously lead global green technology development. Envision Energy joined the Science Based Targets initiative (SBTi) and committed to achieving the "Business Ambition for 1.5°C" in 2021. It has achieved carbon neutrality across its global operations by 2022 and will achieve carbon neutrality throughout its value chain by 2028. About the role: In the role of the Senior BESS Engineer, you will play a key role establishing engineering operational processes within the BESS project delivery organization. Besides leading the process definitions, you will be at the centre of ensuring that the projects is commissioned and operates as per project contractual specifications. Responsibilities: • Work closely with global product solutions teams to prepare project specific integration test plans and ensure that tests and reviewed and validated in time, • Coordinating with internal and external stakeholders for the design and integration of control systems, ensuring clear communication and alignment, • Support country level project teams on project commissioning, SAT and grid compliance (lead in new markets), • Review and approve engineering deliverables pertaining to control system (wiring diagrams, I/O lists, control logics, IP mapping, network routing, etc.), • Understanding of PCS parametrization and operations under fault contributions, inertia and reactive power flow behaviour under dynamic grid conditions, • Understand grid compliance testing requirements/protocols and work closely with PPC/SCADA supplier on control parameterizations and executing the required tests, • Validate tests results and ensuring that the project operates safely to contractual requirements, • Take ownership to feedback product and system integration issues to global product solutions team to develop and improve future products and roadmap, • Act as L3 support for O&M team during project lifetime by analysing and diagnosing system failures., • Collaborate with HQ LMT team to lead root cause investigations of technical issues., • Collaborate with internal stakeholders to implement corrective actions, system updates, or design changes aimed at improving reliability, safety, and performance of the BESS units. Qualifications: • Degree in Electrical Engineering, Power Systems or related discipline, • 5+ years of experience working on utility-scale BESS projects. Experience in product development is a plus, • In-depth knowledge of battery technologies (LFP), PCS functionality, system integration, BESS control philosophies, protection coordination and communication interfaces, • Experience working with FATs, SIT/SAT, alarm management, and integrated controls, • Understand developments / market requirements in the industry (eg. Updates to NFPA FSS, PCS GFM requirements, BESS trading strategies, cybersecurity updates), • Capability to understand and translate grid compliance requirements (eg. G99/G100 in the UK), • Extensive experience in issue diagnostics and troubleshooting during project O&M phase, • Strong coordination, stakeholder management and problem-solving skills

Context For one of our major clients, a leading cable manufacturer and installer, we are actively looking to hire a Site Installation Engineer with proven experience in Horizontal Directional Drilling (HDD) and Microtunneling. The successful candidate will be responsible for overseeing the execution of HDD and cable pull-in operations on-site, ensuring compliance with project specifications, safety regulations, and quality standards. Key Responsibilities Engineering Documentation & Compliance: • Assist the client’s installation office in reviewing and approving subcontractor engineering documentation related to HDD and cable pull-in works., • Ensure compliance with project technical requirements, industry best practices, and HSE regulations., • Support risk assessment activities and method statement reviews., • Ensure proper documentation flow between stakeholders and support the project team in managing technical queries., • Site Execution & Supervision:, • Support the Site Manager in overseeing day-to-day subcontractor activities from mobilization to demobilization., • Monitor subcontractor performance, ensuring adherence to schedules, budgets, and quality requirements., • Provide technical guidance and troubleshooting support during installation and drilling operations. Stakeholder & Client Interaction • Act as the on-site point of contact for client representatives, ensuring alignment between project objectives and execution., • Interface with internal teams (Project Management, HSE, Quality, Engineering) to facilitate seamless progress of work scope., • Subcontractor & Deliverables Management:, • Supervise and validate subcontractor deliverables, including As-Built documentation and technical reports., • Track and report site progress, identifying potential risks and proposing mitigation strategies. Profile & Technical & Professional Competencies • Strong experience in HDD (Horizontal Directional Drilling) and Microtunneling in infrastructure or energy projects., • Knowledge of cable pull-in operations, trenchless technology, and HDD construction methodologies., • Familiarity with risk assessment procedures, method statements, and site HSE protocols., • Ability to interpret and review technical drawings, installation procedures, and engineering documentation., • Strong problem-solving skills and ability to work in a high-pressure site environment., • Effective stakeholder management and communication skills.

Position Summary: The Commissioning Technician is an integral part of the commissioning team, with their main responsibility being to work with and support the commissioning engineer and their manager in the successful commissioning of our BESS projects. The successful candidate must be able and willing to travel and complete tasks at various project sites nation wide. Responsibilities: • Play a critical role on-site in the execution of BESS projects, from mechanical completion through to entering commercial operation,, • Perform task assigned by the commissioning manager and engineer, ranging from visual inspections through to electrical fault finding and beyond,, • Perform daily routine tasks such as executing commissioning test sheets, reviewing and logging issues/resolutions and helping to monitor the progress of the project’s commissioning activities,, • Support the commissioning of the overall control system by testing the network connectivity of all field devices and performing point-to-point tests,, • Provide on-site diagnostic, troubleshooting and hands-on support,, • Supervise subcontractors on-site where required,, • Assist in developing standard operatingprocedures from lessons learned on-site,, • Assist with the completion of testing documentation and preparation of test reports in a timely manner,, • Support client and their O&M contractor training,, • Adhere to all health and safety rules and policies,, • Attending and occasionally leading Plan of Day (POD) meetings,, • Willingness to travel domestically up to 100% of the time. Willingness to support internationally on occasion is advantageous,, • On occasion, be willing to work flexible hours (such as evenings and weekends). Qualifications and Experience: • Minimum NVQ/SVQ (or equivalent) level 3 in electrical discipline. HNC Preferred., • Minimum 2 years’ relevant work experience in an installation, commissioning or service environment,, • Previous experience or training in the renewables sector highly desired,, • High Voltage and/or SCADA experience will be beneficial,, • Experience with HVAC/Liquid Chillers systems desirable,, • Comfortable working in a team and/or alone with good practical problem-solving skills,, • Strong written and verbal communication skills for engaging effectively with internal teams and contractors., • Experience in Microsoft Office tools required, with experience in Smartsheets and Autodesk Construction Cloud advantageous., • Candidate must possess a valid driving license and passport. Compensation & Benefits: Canadian Solar offers a competitive salary plus fully comprehensive benefits and performance bonus package based on an annual objective achievement. Canadian Solar Inc. is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, colour, religion, sex, national origin, sexual orientation, disability, or veteran status.

About Us: Intezer is a leading provider of AI-powered technology for autonomous security operations. With a focus on innovation and quality, its Autonomous SOC Platform is designed to investigate incidents, make triage decisions, and escalate findings about serious threats like an expert Tier 1 SOC analyst (but without the burnout, skill gaps, and alert fatigue). Job Description: The Pre-Sales Engineer will be providing our customers with technical expertise and professional services to make sure they are meeting their objectives. They are a key component of our company’s success, working together with customers, partners, and their Intezer colleagues. Responsibilities: • Work with Sales Team and conduct a success POC, responsible for the POC process and management, • Understand each customer’s security process and make recommendations based on Intezer’s solution and best practices, • Customer ongoing communication – proactively reaching out to our customers and ensuring maximum utilization of our solution, while keeping their satisfaction levels up, • Establish highly effective relationships with senior executives and key decision-makers to ensure a close and successful long-term business relationship, • New customer onboarding – work with our new customers to design, deploy, configure and integrate Intezer solution in their environment and workflows, • Customer services – assist customers with their product questions and issues, and work with the Intezer teams to resolve the issues and answer questions, • Identify up-sell opportunities and communicate potential risks that would threaten renewals, • Pre Sales and/or Customer success experiences, • Experience in customer-facing roles, • Experience as a Security Incident Responder or SOC analyst/manager, • Linux system administration & troubleshooting experience, • Excellent verbal and written English language skills. Additional language - a plus, • Lead Cross-functionally - Collaborate with internal teams to drive alignment, understand customer perceptions and partner together to exceed customer expectations, • Work closely with Product and Professional Service teams to track optimization requests, best practices/technical recommendations and ensure account issues are resolved quickly

PME Engineer – Building Management Systems (BMS) Ireland - Hybrid Working Salary - €50,000 - €60,000 + Package + Bonus About the Role A leading engineering organization is seeking a PME Engineer with strong Building Management Systems (BMS) experience to support the design, implementation, and optimization of building and utility control systems. This role plays a key part in ensuring safe, efficient, and compliant operation of complex industrial and regulated facilities. Key Responsibilities • Design, configure, and support Building Management Systems (BMS) for industrial and regulated facilities, • Integrate BMS with HVAC, clean utilities, process equipment, and electrical systems, • Develop and review control strategies, sequences of operation, and system architecture, • Support installation, commissioning, and validation of BMS and associated field devices, • Perform FAT/SAT, troubleshooting, and system optimization activities, • Ensure compliance with GMP, GxP, and applicable industry standards, • Coordinate with mechanical, electrical, automation, and project teams, • Prepare and maintain engineering documentation, including drawings, specifications, and SOPs, • Support ongoing system maintenance, upgrades, and continuous improvement initiatives Required Qualifications • Bachelor’s degree in Mechanical, Electrical, Automation, or Process Engineering (or equivalent experience), • Proven experience in a PME or BMS-focused engineering role, • Strong knowledge of BMS platforms (e.g., Siemens, Honeywell, Schneider, Johnson Controls, or similar), • Solid understanding of HVAC systems, instrumentation, and electrical controls, • Experience working in regulated environments (pharma, biotech, data centers, or industrial facilities), • Ability to read and interpret P&IDs, control schematics, and electrical drawings, • Strong troubleshooting, communication, and documentation skills Preferred Qualifications • Experience with GMP / life sciences facilities, • Knowledge of cleanroom HVAC and environmental monitoring systems, • Familiarity with BACnet, Modbus, and other building automation protocols, • Commissioning or validation experience, • Understanding of energy management and sustainability initiatives What’s Offered • Competitive salary and benefits package, • Opportunity to work on high-spec, technically complex facilities, • Long-term career development in a growing engineering environment, • Collaborative, hands-on engineering culture, • Hybrid Working

First Point Group is recruiting for a Core Network Engineer (Ericsson/Nokia) with specific previous experience working on Virgin Media / VMO2 and/or BT/EE networks and projects. The successful candidate will have extensive experience within operational support, optimisation, and evolution of a next-generation IMS and 5G core network. This is a fully remote role based on a daily rate contract. Please note - sponsorship cannot be provided, so candidates must live in the UK with valid rights to work. Responsibilities • Perform daily configuration, operation, and maintenance (O&M) of IMS Core network nodes to ensure continuous service availability., • Monitor network KPIs and proactively provide performance improvement recommendations across internal and external IMS Core platforms., • Collaborate with cross-functional teams using automation and analytics tools to improve operational efficiency., • Execute parameter configuration changes on the 5G Standalone Core platform, including cloud-native core environments and subscriber data platforms., • Manage performance monitoring and alerting for 5G SA Core networks using modern observability tools (metrics, logging, and alert management)., • Conduct service validation, acceptance testing, and end-to-end functional testing for IMS and 5G SA services., • Audit core network nodes and services to ensure maximum availability, resilience, and compliance with operational standards., • Lead capacity planning activities for Core network elements, ensuring scalability and alignment with traffic growth and service demand., • Handle end-to-end KPI and KQI analysis across Core and interdependent network domains., • Diagnose and resolve complex IMS Core network issues related to configuration, software, hardware, products, and services., • Support the integration, commissioning, and acceptance of new Core network nodes and services, including project and vendor coordination., • Provide L2/L3 operational support and escalation handling for Core network incidents, including roaming-related issues., • Perform pre- and post-implementation analysis of IMS Core KPIs following network changes and optimisation activities., • Manage product and software lifecycle activities across all Core network nodes, including upgrades, patches, and decommissioning. Key Skills & Experience • Strong hands-on experience with IMS Core and 5G Core network environments, • Proven expertise in Core network operations, performance management, and troubleshooting, • Experience working with cloud-native Core architectures and automation-driven operations, • Solid understanding of KPIs, KQIs, and end-to-end service assurance, • Ability to manage complex incidents and collaborate across engineering, operations, and vendor teams, • Experience supporting live production networks in a high-availability environment

Embedded Software Engineer | Newcastle | £45,000 – £60,000 (DOE) KO2 are working with a leading technology company in Newcastle that develops advanced robotics, automation, and control systems for cutting-edge industrial and research applications. They’re looking for a skilled Embedded Software Engineer with a passion for developing reliable, high-performance software that integrates seamlessly with complex hardware and control systems. The Role As an Embedded Software Engineer, you’ll play a key role in designing, developing, and testing real-time software for robotic, control and automation products. You’ll work as part of a multi-disciplinary engineering team — collaborating with experts in electronics, mechanical design, and systems integration — to deliver innovative solutions from concept through to deployment. This is a hands-on role, ideal for someone who enjoys solving technical challenges, working close to hardware, and contributing to meaningful, real-world engineering projects. Key Responsibilities • Design, develop, and maintain real-time embedded software in C/C++ on Linux and embedded platform based systems., • Collaborate with electronics and mechanical engineers to integrate software with robotic and control hardware., • Debug, test, and validate software, ensuring reliability and performance., • Read and interpret electrical schematics and interface with embedded systems., • Review and test software written by others, ensuring best practices and quality standards are met., • Support system-level integration, troubleshooting, and performance optimisation., • Apply innovative thinking to solve complex technical problems in robotics and automation. Skills & Experience Required • Proven industry experience in embedded or real-time software development., • Strong background in C/C++ programming, • Basic understanding of electronics and ability to read electrical schematics., • Experience working within multi-disciplinary teams and cross-functional environments., • Excellent analytical, problem-solving, and data interpretation skills — with the ability to make sound decisions under pressure., • Degree in Software Engineering, Computer Science, Robotics, Physics, or Mathematics, or equivalent experience., • Either hold or be able to achieve SC Clearance Desirable Skills • Experience with ROS (Robot Operating System)., • Experience in robotics, machine control systems, or industrial automation., • Experience with software testing, code review, or CI/CD processes. What’s on Offer • £45,000 – £60,000 (depending on experience), • Private health insurance and pension scheme, • Onsite, technically collaborative environment, • Opportunity to work on cutting-edge robotics and automation systems, • Career development in a forward-thinking engineering company If you’re an Embedded Software Engineer who thrives on solving complex technical challenges and wants to help shape the future of robotics and automation, this is an excellent opportunity to join an innovative and growing team in Newcastle.

D365 Architect | Contract | Fully remote (UK-wide) We are seeking a highly experienced and versatile Dynamics 365 CE Solution Architect to lead the design and implementation of an enterprise-level CRM transformation. This is a unique "hybrid" architect role; while you will be the technical lead for architectural decisions and stakeholder management, you must be a hands-on practitioner willing to "get your hands dirty" alongside our development team. The ideal candidate will have deep expertise in Asset Management and Field Service, alongside core CRM (Sales/Service) functions. Role Snapshot: • Location: Fully remote (UK-wide), • Rate: £500-600/day outside IR35, • Duration: 6 months Key Responsibilities • Architectural Design: Lead the creation of high-level and detailed solution designs, ensuring alignment with business goals and Microsoft best practices., • Stakeholder Management: Confidently present architectural roadmaps and project updates to C-suite and business stakeholders, translating technical concepts into business value., • Hands-on Implementation: Actively support the development team by troubleshooting complex issues, reviewing code, and occasionally performing advanced configuration or coding when required., • Advanced UI/UX Implementation: Lead the development of custom Power Apps Component Framework (PCF) controls to enhance the user experience, specifically utilizing third-party libraries such as AG Grid for advanced data handling and custom charting. Technical Skills & Experience • D365 Core: Extensive experience with Dynamics 365 Customer Engagement (Sales, Service) and the Power Platform (Power Apps, Power Automate, Dataverse)., • Development Tools: Strong knowledge of C#/.NET, JavaScript/TypeScript, and the Web API., • PCF Controls: Deep experience building and implementing PCF (Power Apps Component Framework) controls. Proficiency with AG Grid, Kendo UI, or similar high-performance grid/charting libraries is essential., • Integrations: Experience architecting integrations between D365 and external systems (ERP, or legacy databases) using Azure Logic Apps or Service Bus. If you'd be interested to hear more, and believe you could be a good fit, please apply now for immediate consideration.

We have multiple clients across the UK currently looking for E&I / EC&I / C&I or Multi-Skilled Engineers that are Electrician Bias. You would need prior experience in an industrial setting. Some of the key locations are: Cambridge Suffolk Norwich Manchester However if you are open to relocation or actively looking for a similar role anywhere in the UK, do apply, we have a very big team with clients all over the country looking for strong EC&I professionals. Below is an example of the type of positions we have available. EC&I Technical Leadership • Serve as the site’s Subject Matter Expert (SME) for Electrical, Control, and Instrumentation matters, ensuring safe, reliable, and compliant operation of plant equipment., • Develop and maintain site EC&I standards (including ATEX, DSEAR, SIL, functional safety, etc.) in alignment with industry best practices and legal requirements. Project Management • Lead or support EC&I projects from concept through commissioning, ensuring on-time, on-budget delivery., • Coordinate with internal teams (Operations, Maintenance, HSE, etc.) and external contractors to define scopes of work, manage schedules, and track budgets., • Oversee design, installation, and commissioning of new EC&I systems, ensuring compliance with COMAH and other regulatory requirements. Maintenance & Reliability • Provide technical guidance to maintenance teams on preventive, predictive, and corrective maintenance of electrical and instrumentation assets., • Support day-to-day troubleshooting and fault-finding across a range of systems (e.g., PLCs, DCS, safety instrumented systems, field instrumentation)., • Drive reliability improvements through root cause analysis (RCA) and continuous improvement methodologies. COMAH & Regulatory Compliance • Collaborate closely with the HSE team to ensure EC&I operations and projects satisfy COMAH, ATEX, DSEAR, and other relevant regulations., • Maintain and develop safety instrumented systems (SIS), ensuring proper documentation, proof testing, and compliance with IEC 61508/61511., • Participate in COMAH-related activities, including audits, hazard studies (HAZOP/LOPA), safety reports, and regulator inspections. Standards & Documentation • Establish and maintain EC&I technical documentation (e.g., drawings, loop diagrams, schematics) and ensure compliance with site change control procedures., • Implement standards for the management of safety-critical systems, ensuring appropriate performance levels (e.g., SIL determinations) are met., • Support development of site procedures, work instructions, and best practices in line with company policies and legal obligations. Continuous Improvement • Identify and implement opportunities to enhance efficiency, reduce cost, and improve safety within EC&I disciplines., • Keep abreast of emerging technologies, standards, and best practices; recommend upgrades and innovations to maintain a competitive edge., • Promote a culture of continuous improvement, sharing knowledge, and mentoring other engineering team members. Contractor & Stakeholder Management • Manage EC&I contractors and vendors, including selection, contract negotiation, and oversight of quality control., • Liaise with external stakeholders (e.g., HSE, Environment Agency) and represent the site’s EC&I interests in audits or inspections., • Collaborate with internal stakeholders such as Operations, R&D, QA, and other engineering functions to align priorities and deliver effective solutions. Budget & Resource Management • Support the Engineering Manager in developing and managing budgets related to EC&I projects and maintenance activities, • Monitor spending against budget, ensuring cost-effective solutions without compromising safety or performance., • Proactively plan resource needs and schedule work to minimize downtime and disruption to production. Key Requirements: Education & Certifications • Bachelor’s degree in Electrical, Control & Instrumentation Engineering (or a related discipline)., • Chartered Engineer (CEng) status preferred or working towards it. Experience • 5–10 years of EC&I engineering experience within a high-hazard chemical, petrochemical, or similar industrial environment., • Proven track record in executing and commissioning EC&I projects, including cost control and contractor management., • Familiarity with COMAH regulations and major hazard site requirements. Technical Skills • Strong knowledge of process control systems (PLC, DCS), instrumentation calibration, loop checking, and functional safety (IEC 61508/61511)., • Understanding of electrical distribution systems (Low/High Voltage), BS7671 wiring regulations, and relevant directives., • Proficiency in computer-aided design (CAD) software and maintenance systems (e.g., CMMS/Agility). Open to candidates willing to relocate within the UK Visa Sponsorship unfortunately not possible to non-EU nationals

Role: Commissioning Engineer - BESS Location: UK Wide Employment Type: Permanent Sector: Energy Storage / Power Systems / Renewables About the Opportunity MDE UK is working in partnership with a global clean energy technology provider delivering large-scale battery energy storage systems (BESS) across utility and commercial projects. Due to continued growth and an expanding international project pipeline, we are looking to appoint an experienced Commissioning Engineer to support installation, commissioning, and ongoing technical support of energy storage assets. This role offers the opportunity to work on cutting-edge grid-scale energy storage projects, collaborating closely with international engineering, R&D, and product teams. Key Responsibilities • Carry out installation and commissioning of Battery Energy Storage Systems (BESS) in line with technical procedures and safety standards, • Perform system debugging, fault diagnosis, and troubleshooting, restoring energy storage systems to full operational status, • Support system start-up, testing, FAT/SAT activities, and site acceptance processes, • Prepare and review site commissioning plans, schedules, and technical documentation, • Coordinate on-site commissioning activities alongside project managers, site leaders, and subcontractors, • Complete technical modifications, upgrades, and maintenance activities as directed by the site lead, • Provide clear commissioning reports and feedback to engineering and project teams, • Work closely with international product and R&D teams, ensuring alignment with system design and performance expectations Experience & Qualifications • 2-3+ years’ experience commissioning Battery Energy Storage Systems (BESS) or similar power systems, • Strong background in electrical engineering, power electronics, or energy storage systems, • Experience working on utility-scale or commercial energy infrastructure projects, • Relevant site and safety certifications preferred, including:, • CSCS, • IOSH/NEBOSH, • SMSTS, • HV/LV electrical certification or authorisation is highly advantageous Skills & Competencies • Strong hands-on commissioning and fault-finding capability, • Comfortable working in site-based, field environments with long-term travel requirements, • Strong communication skills and ability to work within multidisciplinary and international teams, • Competent in Microsoft Office and technical reporting, • Detail-oriented, safety-focused, and process-driven, • Willingness to follow company procedures and site leadership direction

Overview We are seeking an experienced Software Technical Lead to provide hands-on technical leadership within an automation and intralogistics environment. This role is ideal for a senior engineer who actively writes and reviews code, has managed and supported other developers, and can lead the technical delivery of complex software solutions, including Warehouse Management Systems (WMS). This is not a purely managerial role. The successful candidate must deeply understand code and be comfortable working close to the detail while guiding others. Key Responsibilities Technical Leadership • Act as the technical authority across software projects within automation and intralogistics systems, • Lead solution design, architecture, and technical decision-making, • Ensure high standards of code quality, performance, scalability, and maintainability, • Review code and provide hands-on technical support to developers, • Actively contribute to the codebase using .NET and Python, • Support development of software solutions integrating with WMS, automation platforms, and material handling systems, • Line-manage and mentor software developers, • Provide day-to-day technical guidance and support to direct reports, • Support skill development, knowledge sharing, and best practices, • Conduct technical reviews and contribute to performance and development discussions Required Skills & Experience Essential • Proven experience as a Software Technical Lead, Lead Developer, or Senior Software Engineer, • Demonstrable experience managing and technically supporting other developers, • Strong, hands-on coding experience with .NET and Python, • Strong understanding of software architecture and system integration, • Background in automation, intralogistics, warehouse systems, or industrial software, • Experience with Warehouse Management Systems (WMS), • Must understand code deeply — able to design, review, debug, and improve it What We’re Looking For • A hands-on technical leader, not a people manager detached from code, • Someone comfortable guiding developers while remaining deeply technical, • A pragmatic problem-solver with strong communication skills, • A leader who can balance delivery, quality, and mentoring

A recruitment agency is supporting a client’s search for a Mechanical Maintenance Technician in Newcastle upon Tyne.This permanent, shift-based role involves maintaining and troubleshooting production machinery.The ideal candidate should have strong mechanical knowledge, experience with hydraulics

A leading holiday park organization based in Newcastle upon Tyne is looking for an experienced SQL Database Administrator to oversee its SQL Server environment.The role includes responsibilities such as maintaining high availability, troubleshooting, and managing database changes.Candidates should h

A leading broadcasting organization is seeking an Operational Broadcasting Engineer to monitor and maintain broadcast equipment and systems.This role involves performing scheduled maintenance, troubleshooting technical issues during live broadcasts, and collaborating with various teams to implement

Regular on-site visits to clients are required, ensuring effective troubleshooting and communication with the team in Newcastle upon Tyne. A technology solutions provider is looking for an experienced IT Service Desk Engineer. The successful candidate must have solid experience in IT support, knowle

A multidisciplinary engineering consultancy is seeking an experienced Building Management System (BMS) design engineer in Newcastle upon Tyne. Candidates should have experience with BMS or DDC platforms, strong communication skills, and effective troubleshooting abilities.

Roles and Responsibilities Performs remedial repairs on Desktops, laptops, printers, video conferencing, access, kiosks, operational hardware and any other authorized peripheral equipment Assist site with hardware/ desk/ office/ boardroom setup as requested Execute supported directed tasks for network or server support on-site by escalations teams. Provide first level troubleshooting and support f...

Possess at least 3 years IT Experience in site support, Desktop & Systems IT support in the enterprise. Experience of End User/Desktop Support: Microsoft Windows, Microsoft Office, Microsoft Modern Desktop, and mobile devices troubleshooting & management. As an IT Desktop Support Engineer your respo

A leading recruitment agency is seeking a Shift Maintenance Electrician to ensure the safety and operational efficiency of plant equipment.You will respond to breakdowns, perform planned maintenance, and troubleshoot electrical systems in a fast-paced manufacturing environment.The ideal candidate wi

A leading infrastructure company in the UK is seeking an Electrical Field Engineer to oversee the installation, testing, and maintenance of electrical systems across various project sites.The ideal candidate will have a Bachelor's degree in Electrical Engineering, along with 2 to 5 years of relevant

We are currently looking for Commissioning/Troubleshooting Technicians to work on wind turbines around the United Kingdom, willing to travel as needed. Experience in WTG commissioning or troubleshooting projects - onshore and/or offshore - and training (mandatory).

This fully remote role involves optimizing VoNR performance, troubleshooting issues, and monitoring key performance indicators across Nokia AirScale networks for U.

The role involves diagnostic troubleshooting, system upgrades, and performance improvements, requiring strong technical knowledge of radio network infrastructures.

A recruitment agency in Greater London is looking for Production Support staff to assist in troubleshooting and quality control in a production environment.

A leading energy company in the United Kingdom is seeking a skilled technician to perform troubleshooting, calibration, and repairs of electronic and pneumatic instrumentation.

A leading technology company in the United Kingdom is seeking a Senior Support Engineer to tackle technical challenges in IoT connectivity.The ideal candidate should have a deep understanding of mobile core networks and excellent communication skills.In this full-time role, you will troubleshoot con

This position involves training for inverter installation, troubleshooting issues remotely or onsite, and providing after-sales support in your designated region.

The role involves maintaining and troubleshooting audio-visual equipment, supporting event operations, and ensuring effective communication with clients.

The role involves troubleshooting and maintaining the integrity of customer-facing systems, ensuring effective incident management, and contributing to team knowledge.

Uma empresa do setor de turbinas eólicas está à procura de um Técnico de Turbinas Vestas no Reino Unido.Este papel requer qualificações elétricas/mecânicas nível 3 e experiência prática com turbinas Vestas.O candidato ideal deve ter disponibilidade para viajar, resolução de problemas e

A leading e-commerce company seeks a Catalog Support Engineer to resolve catalog-related issues and improve data quality.The role demands strong analytical and problem-solving skills along with technical expertise in Unix and programming languages like Python and Java.Candidates should have a backgr

This role involves assessing turbine conditions, performing troubleshooting, and mentoring fellow technicians in resolving issues.