Trabajos ada en Bay Shore, New YorkCrear alertas

\n\n \n \n Performs a variety of functions and technical procedures necessary for the care of patients across the continuum. Utilizes the processes of assessment, diagnosis, treatment, follow-up, and outcome evaluation. Works within the scope of practice of a nurse practitioner.\n \n \n\n\n \n \n \n\n\n \n \n \n \n \n Description for Internal Candidates\n \n \n \n \n \n \n \n \n \n \n \n \n \n Performs a variety of functions and technical procedures necessary for the care of patients across the continuum. Utilizes the processes of assessment, diagnosis, treatment, follow-up, and outcome evaluation. Works within the scope of practice of a nurse practitioner. \n \n \n *ADA Essential Functions \n \n • Master’s Degree in a Nurse Practitioner Program, required. \n • Current license to practice as a Registered Professional Nurse AND a Nurse Practitioner New York State. \n • National Board Certification in specialty area, required. Certification to be obtained within ONE (1) year of hire. Board Certification is to match area of practice. \n • Has a collaborative practice agreement with designated protocols filed with NYS Department of Education OR collaborative relationship attestation as per the Nurse Practitioner Modernization Act 2015. \n • Previous experience relevant to the area of clinical practice, preferred. \n .minimum of 2 years inpatient experience as a NP preferred. \n Occasional day shifts, as needed. \n \n \n \n \n\n *Additional Salary Detail \n The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future.When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

\n Job Description \n Operates x-ray and auxiliary equipment processes images; maintains and cleans equipment. Maintains required documentation. \n Job Responsibility \n\n • Prepares patient for exam. To relieve patient of pre-testing anxiety, translates examination into layman terms based on professional knowledge. Ensures consent form for procedure is obtained if necessary.\n, • Performs various x-ray exams according to established standards, procedures and procedures of the division. Positions patient for taking of radiographs according to the departmental standard operating procedures. Arranges, attaches, or adjusts immobilization and supportive devices for patients. Adjusts the x-ray equipment and operates controls to obtain correct exposure Monitors patients condition in accordance with technical and safety standards. Recognizes and promptly reports patients motor abnormalities; including, fainting, discoloration, contrast reactions etc., to the Radiologist. Keys in Patient history data and other pertinent information obtained from requisition. Monitors patients condition during the procedure. Operates equipment for transferring computed images to film and archival of disc memory to tape.\n, • Processes and maintains exposed images. Labels film for identification and maintains required records. Utilizes film markers and ensures images are properly marked as the right or left side. Ensures images are legibly labeled with correct date and patient identification. Enters the exam onto the daily log sheet as needed. Properly completes the correct tracking steps for each examination.\n, • High School Diploma or equivalent, required.\n, • Graduate of an approved Radiologic Technology program, required.\n, • New York State Department of Health licensure as a Radiologic Technologist, required.\n, • American Registry of Radiologic Technologists (ARRT) registration required for positions filled after April 18, 2010.\n, • Per diem, flexible schedule, preferred. \n\n *Additional Salary Detail The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

Job Description We are seeking an experienced Construction Project Manager with direct MTA project experience to oversee and manage public infrastructure construction projects, including transit stations, tunnels, track work, and related facilities. The ideal candidate will have a strong understanding of MTA standards, procedures, and stakeholder coordination. Salary up to $200k including company paid medical/dental/401k match AMAZING COMPANY TO WORK FOR!!!! Key Responsibilities: * Lead and manage all phases of construction projects from planning to closeout, ensuring compliance with MTA regulations and safety standards. * Oversee subcontractors, consultants, and vendors to ensure project delivery on time and within budget. * Develop and maintain project schedules (e.g., using Primavera P6), budgets, and cost tracking tools. * Prepare and submit progress reports, RFIs, change orders, and other documentation as required by MTA guidelines. * Coordinate with MTA agencies (NYCT, LIRR, Metro-North, etc.), third-party stakeholders, utility companies, and municipal agencies. * Monitor quality assurance and quality control processes to meet specifications and contract requirements. * Attend and lead regular project meetings with MTA representatives, engineers, contractors, and stakeholders. * Ensure adherence to MTA safety regulations and conduct jobsite safety inspections and audits. * Resolve project-related issues including delays, conflicts, and unforeseen conditions. Qualifications: * Bachelor's Degree in Civil Engineering, Construction Management, Architecture, or a related field. * Minimum of 5–10 years of construction project management experience, with at least 3 years on MTA or other public transportation infrastructure projects. * Familiarity with MTA project delivery methods, contracts (such as Design-Bid-Build, Design-Build), and agency procedures. * Experience working with relevant regulatory agencies and compliance standards (e.g., OSHA, ADA,

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). LI-JF1 Base Pay Range Min - Max (in $USD): $20.75 - $20.75 Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching 'Find Open Jobs'. Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Safelite.com/Careers. Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws and regulations and with Safelite Group, Inc. policies and practices. --

Starting Hourly Rate / Salario por Hora Inicial: $18.00 USD per hour ALL ABOUT TARGET Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. Learn more about Target here. ALL ABOUT SEASONAL JOBS Seasonal Specialty Sales Roles: A sales force of specialized consultants who provide tailored suggestions and solutions through active selling and compelling visual merchandising presentations that inspire guests and build the basket. Seasonal Service & Engagement: Advocates of guest experience who welcome, thank, and exceed guest service expectations by focusing on guest interaction and recovery. Seasonal General Merchandise & Food Sales: Experts of operations, process and efficiency who enable a consistent experience for our guests by ensuring product is set, in-stock, accurately priced and signed on the sales floor. At Target we believe our team members have meaningful experiences that help them build and develop skills for a career. These roles can provide you with the: • Knowledge of guest service fundamentals and experience supporting a guest first culture across the store, • Experience in retail business fundamentals: department sales trends, inventory management, and process efficiency and improvement, • Experience executing daily/weekly workload to support business priorities and deliver on sales goals WHAT WE ARE LOOKING FOR We might be a great match if: • Working in a fun and energetic environment makes you excited…. We work efficiently and as a team to deliver for our guests, • Providing service to our guests that makes them say I LOVE TARGET! excites you…. That’s why we love working at Target, • Stocking, Setting and Selling Target products sounds like your thing… That’s the core of what we do., • You aren’t looking for Monday thru Friday job where you are at a computer all day… We are busy all day (especially on the weekends), making it easy for the guest to feel welcomed, inspired and rewarded The good news is that we have some amazing training that will help teach you everything you need to know. But there are a few skills you should have from the get-go: • Welcoming and helpful attitude toward guests and other team members, • Learn and adapt to current technology needs, • Work both independently and with a team, • Resolve guest questions quickly on the spot, • Attention to detail and follow multi-step processes We are an awesome place to work and care about our teams, so we want to make sure we are clear on a few more basics that we expect: • Accurately handle cash register operations, • Climb up and down ladders, • Scan, handle and move merchandise efficiently and safely, including frequently lifting or moving merchandise up to 40 pounds, • Flexible work schedule (e.g., nights, weekends and holidays) and regular attendance necessary Roles Include: • Seasonal Guest Advocate, • Seasonal General Merchandise Expert, • Seasonal Fulfillment Expert, • Seasonal Style Consultant, • Seasonal Inbound Expert, • Seasonal Food & Beverage Expert, • Seasonal Tech Consultant Find competitive benefits from financial and education to well-being and beyond at . Benefits Eligibility Please paste this url into your preferred browser to learn about benefits eligibility for this role: | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: Americans with Disabilities Act (ADA) In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to . Non-accommodation-related requests, such as application follow-ups or technical issues, will not be addressed through this channel. Application deadline is : 12/12/2025

Job Description Work Schedule: 10-month school year (September - June); 6-week summer session is optional. Minimum Qualifications: • Proficiency in American Sign Language (ASL) is required., • NYS Teaching Assistant Certification or ability to obtain certification., • Opportunities to interpret various extracurricular activities are also available. Benefits: Health insurance, dental insurance, vision, NYSLRS pension, 403(b) and supplemental insurance plans. Application Deadline: Open until filled. ADA Statement: Cleary School for the Deaf is committed to diversity in the workplace, and provides equal employment opportunities for all. We encourage all interested applicants to apply.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is onsite at our Bohemia, NY office with extensive travel required (minimum 50% across North America) The pay range for this position is between $180,000 and $180,000 annually, and we will rely on previous experience This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Director of North America Sales will refine and execute DDC’s sales strategy across the United States, Canada, and Mexico. This role leads a high-performance sales team, driving new business growth, and strengthening customer relationships within the aerospace, defense, and space industries. The Director will balance strategic leadership with hands-on engagement, ensuring accurate forecasting, disciplined pipeline management, and the achievement of ambitious sales targets. Key Position Accountabilities: • Lead, mentor and scale the North America sales team (direct and rep-based), • Inspire a performance-driven team culture rooted in integrity, accountability, and DDC’s commitment to ethical business practices and compliance standards., • Drive collaboration with Business Unit Teams, disciplined pipeline management, forecasting accuracy, and CRM integrity., • Monitor sales performance metrics, including bookings growth and sales vs. plan, and provide regular progress reviews., • Strengthen key account relationships and identify high-potential new business opportunities for growth., • Collaborate cross-functionally to shape pricing, product development and strategy, go-to-market plans and service improvements. Stay informed on latest new platforms / projects and ensure engagement with the right contacts., • Lead contract negotiations and high-level customer engagements., • Motivational leader with a team-first mindset., • Results-driven, with a proven ability to deliver consistent sales growth., • Adept in technical sales, translating complex solutions into customer value Strong strategic thinker with solid financial and analytical skills., • Excellent communicator with strong interpersonal, presentation, and negotiation abilities., • High integrity, professionalism, and accountability. Required: • Bachelor’s degree in Business, Marketing, Engineering, Communications, or related field., • 5–7 years of progressive sales leadership experience, including managing a sales team., • 3–5 years of B2B technical sales experience; aerospace, defense, or government contracting experience preferred., • Advanced degree (MBA or related field)., • Experience negotiating contracts in government or defense sectors. Directly manages Business Development Managers and Inside Sales Account Managers, with responsibility for hiring, training, performance management, and team development. Work Environment: Based in an office environment with extensive travel (minimum 50%) throughout North America for customer visits, sales activities, and industry events. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. The pay range for this position is between $120,000 and $170,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: This individual will play a pivotal role in driving test engineering and process improvements, optimizing designs, and supporting production operations, directing a team of engineers and technicians. This role requires a combination of leadership, technical expertise, and hands-on experience in test and process engineering within a high-reliability electronics manufacturing environment. Key Position Accountabilities: • Provides technical leadership to address challenges and introduce new capabilities to DDC’s Manufacturing and Test Engineering., • Oversees the design and development of test fixtures and software, ensuring the creation of innovative and reliable test systems., • Lead efforts to research and implement new testing methods, equipment, and techniques to enhance product testing capabilities., • Supervises, mentors, and develops a cross functional team of engineers and technicians, fostering a culture of continuous learning, growth and high performance., • Participates in the development of new products and supports the timely fabrication and testing of designs., • Leads the creation of new processes and procedures, contributing to teams of varied technical disciplines, and ensuring efficient process documentation (SOPs, travelers, etc.)., • Collaborate with design teams to develop innovative approaches that optimize product design trade-offs, including cost, performance, and time to market., • Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues., • Lead failure analysis investigations of in-house and customer-returned products. Collaborate with other engineering teams to make data-driven recommendations that improve product quality and reduce the likelihood of failures., • Manages the development and execution of project plans, including resource allocation and schedule oversight, ensuring the timely and successful introduction of new processes and test technologies in alignment with company objectives., • Propose and champion the implementation of new methods, capital equipment, technologies, and processes to enhance product performance and operational efficiency., • Participate in technical meetings with standards organizations, ensuring alignment with DDC’s strategic goals., • Coordinate testing, perform failure analysis, and support Applications Engineering in resolving product-related issues at customer sites., • Lead vendor selection for major design projects, considering technical performance, risk, and cost., • Education: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Applied Sciences required; Graduate degree and previous leadership training is desirable., • Experience: 7+ years of relevant engineering experience, with a focus on test or process engineering and manufacturing support; and 2+ years’ experience as a supervisor, lead engineer or senior engineer., • Technical Skills:, • Knowledge of MIL STDs 883, MIL-PRF 38534, 38510, IPC 610 (desirable)., • Proven expertise in designing, optimizing, and implementing test systems, fixtures, and software., • Strong knowledge of test equipment, failure analysis techniques, and process improvement strategies, • Familiarity with all aspect of Electronics manufacturing including Hybrid and PCB manufacturing., • Leadership Skills: Demonstrated ability to lead teams, mentor engineers, and manage complex engineering projects., • Communication: Strong written and verbal communication skills, with the ability to present technical information to a wide range of audiences., • Additional Skills:, • Knowledge of industry best practices and continuous improvement methodologies. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Call Center Agent Suffolk Bus Corp. ("SBC") is a family-owned transportation company located in Ronkonkoma, NY. SBC has been providing Suffolk County's transit and special needs transportation services. As a Call Center Agent, you will work in our Transit headquarters in Ronkonkoma, NY. This is a Part-time position 20 hrs per week and reports directly to the Call Center Manager. The call center is open Monday - Saturday 7am - 5pm and Sunday 8am - 4:30pm. KEY DUTIES & RESPONSIBILITIES • Provide exceptional customer service answering calls in a clear, concise and friendly manner, • Work cohesively with colleagues, • Meet needs of the caller as it pertains to bookings, cancellations, and trip verification, while following the policies and procedures of the ADA program, • Must always be mindful of the difficulties faced by the callers, sight impaired, hearing impaired, cognitive challenges as well as physical limitations, • Resolve complicated round trips, • Knowledge of the Long Island, NY geography, • Map Testing periodically throughout the year, • Reliable transportation, • Ability to sit for prolonged periods of time, • Good Command of the English language, • Computer Skills: keyboarding, • Flexible work hours, operation runs seven days a week, • Ability to answer large call volumes with a smile in your voice, • Strong attention to detail, • Maintain confidentiality, • Strong interpersonal skills Job Type: Part-time Pay: $15.50 per hour Powered by JazzHR locG3fXpAd

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation range for this role is $120,000 to $160,000 annually. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Accounting Manager will primarily work independently to support the team for the monthly financial close, account reconciliations and support reporting of results. Reporting into this role is Accounts Receivable, Accounts Payable, Cost Accounting and General Accounting. Additionally, there are responsibilities pertaining to reporting, forecasting and audit. Key Position Accountabilities: • Responsible for timely monthly close. Reviews financial statements, ensuring completeness and accuracy., • Coordinates the preparation of the annual budget., • Supports monthly and quarterly forecasts, including variance analysis to actuals., • Coordinates all year-end audit activities and SOX compliance reviews., • Reviews and approves all department reports including capital expenditures, budget vs. actual analysis and balance sheet account analysis., • Ad hoc projects for process improvements and other general needs for leadership., • Ensure implementation of Company safety, health and environmental programs for employees whose work is directed. Ensure that safe work practices are followed, and the environment is fully protected in accordance with Company policy and governmental regulations., • Commitment to the Company’s policies, principles, and procedures and adheres to the Company’s, • Procedures including Environmental, Health and Safety (EH&S), Equal Employment Opportunity (“EEO”), discipline/corrective action, and security. Required Knowledge, Skills and Abilities: • Working knowledge of higher-level functions in Microsoft Office products, Excel, Word, PowerPoint., • Knowledge of generally accepted accounting principles (GAAP) and procedures., • Understanding of financial statements based on US GAAP., • Ability to independently research and analyze various types of data., • Ability to analyze, organize and prioritize work while meeting multiple deadlines., • Effective oral and written communication skills. Qualifications: • Bachelor’s Degree in Accounting required., • 5-10 years relevant work experience preferred., • Prior manager experience with direct reports preferred., • Public accounting experience preferred., • Knowledge of applicable Accounts Payable and Accounts Receivable preferred., • Manufacturing experience strongly preferred., • Any combination of education, training and experience listed above that demonstrates the ability to perform the duties of the position. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office with occasional travel to manufacturing location in Mexico The pay range for this position is between $120,000 and $150,000 annually, and we will rely on previous experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Senior Design Engineer is responsible for developing new magnetics related components based on customer or marketing inputs. They shall have working knowledge of transformer design, property of materials, electrical testing, and design for manufacturability. Performance will be measured on creating designs that meet or exceed customer requirements, timely transition of new designs from concept to production readiness, collaboration with production in suggesting and implementing productivity projects. Key Position Accountabilities: · Design and Development: Plan, conceptualize, and develop new magnetics components using new and innovative technology. Design analog circuits related to high frequency data bus and video signal transmission. Provide material and labor estimates to Sales for customer requests for pricing. • Equipment and Materials Research: Actively seek out opportunities improve existing processes by keeping up with new equipment and material releases. Seek out ways to integrate new equipment and materials to improve productivity., • Collaboration: Work closely with engineers, managers, and other design professionals in the development of prototypes, sustaining efforts, and integration of systems into manufacturing processes. Support the transition of designs from concept to prototype and to full-scale production., • Mentoring and Design Review: Coach junior engineers in solving design issues. Responsible for project management of Design Reviews., • Testing and Validation: Create, review, and verify test setups. Support the execution of testing procedures required for product acceptance and qualification. Collaborate with internal and external facilities to validate design performance against defined specifications., • Engineering Analysis: Perform calculations to support CapEx return on investment decisions., • Material Selection and Development: Choosing the right material for a specific application, considering factors like strength, durability, cost and environmental impact., • Documentation and Compliance: Create, review, and maintain technical drawings, specifications, and product documentation using a mix of CAD (SolidWorks preferred), MS Word, and digital images. Ensure designs and processes meet industry and regulatory standards, including internal engineering standards and product definition procedures., • Continuous Improvement: Apply problem-solving skills to identify areas of improvement in existing designs or manufacturing processes, making recommendations and providing solutions to enhance efficiency, quality, and cost-effectiveness., • Mathematical and Analytical Skills: Strong ability to apply engineering fundamentals, and statistical methods to create innovative, reliable, cost effective design solutions that translate into more design wins., • Design Skills: Strong knowledge of electromagnetic theory, magnetic circuit design, and magnetic material properties., • Analog Circuit Design: Working understanding of analog and digital electronics, signal integrity, power and thermal management is a plus. Simulation experience with LTspice or similar is a plus., • Problem Solving and Innovation: Excellent troubleshooting and critical thinking skills with the ability to propose innovative and creative solutions to complex design challenges., • Communication Skills: Strong verbal and written communication skills, with the ability to present technical information clearly to both technical and non-technical stakeholders for internal and external customers. Excellent interpersonal skills to work collaboratively across teams. Bilingual in English and Spanish is beneficial., • Adaptability: Ability to work on several projects at once and shift priorities as needed to meet company goals, • Attention to detail: High attention to detail with the ability to conduct rigorous reviews of designs, calculations, and test procedures to ensure compliance with specifications and quality standards., • Bachelor of Science degree in Engineering discipline required., • Bachelor’s or Master’s Degree in Electrical Engineering preferred, • 7+ years of related experience., • Working Knowledge of Military Specifications., • Experience in Military/Aerospace industry a plus. Work Environment: • This position operates in a mix of office, manufacturing, and lab-based environment., • Some travel may be required for process review at other manufacturing plants or supplier locations. Physical Demands: • Must be able to remain stationary during design and analysis sessions., • Having good manual dexterity and basic soldering / assembly skills to assist in building test and assembly fixtures is a plus., • Ability to lift and move up to 25 pounds of testing or prototyping equipment., • Frequent communication with cross-functional teams; ability to convey complex technical details clearly and effectively. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Job Description Position Title: Component Engineer Jr. REV000 Department: Engineering Reports to: Engineering Manager or Director Job Code: FLSA: Salaried (Exempt) EEO Category: 2 - Professionals This position is 100% onsite at our Bohemia, NY office. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. The compensation for this role is $80,000 to $90,000 annually. Position Summary: The Component Engineer will support the Design Engineering team in selecting components used in our products. This individual will work closely with engineering teams and suppliers to ensure components meet system requirements and reliability standards. The Component Engineer will also contribute to resolving obsolescence issues, creating procurement specifications and supporting reliability predictions. Key Position Accountabilities: • Component Selection & Support:, • Support the Design Engineering team in component selection during the design and development phases, ensuring components are specified correctly to meet project requirements., • Analyze system and customer requirements to ensure components meet performance standards without over or under specification., • Part Research & Supplier Coordination:, • Conduct part research to support engineering needs and interface directly with suppliers to ensure part selection aligns with design specifications and requirements., • Identify and source alternate components based on cost, availability, and compatibility for new and existing product designs., • Obsolescence Management & Compliance:, • Proactively identify obsolete components and suppliers and develop solutions to mitigate risks associated with obsolescence., • Work with suppliers to ensure compliance standards are met and update documentation into the PLM/ERP system., • Facilitate EOL procurement and tracking component usage, • Review BOM components for obsolescence and NRND, • Procurement & Specifications Management:, • Create and revise procurement specifications to control and define part/material acquisition for components., • Design Process Support:, • Collaborate with engineering teams to provide input for continuous improvement in design processes and component reliability., • Documentation & Communication:, • Create detailed reports, ECNs, Action Notices and component qualifications., • Ensure effective communication with cross-functional teams to address design and component-related issues., • Vendor & Supplier Coordination:, • Collaborate with vendors to ensure that component designs are aligned with industry standards and project requirements., • Compliance & Database Updates:, • Education & Experience:, • Bachelor’s degree in Electrical Engineering, Computer Engineering, Material Science, Chemistry, Physics, or a related field., • Technical Skills:, • Familiarity with component procurement processes and data mining solutions (e.g., SiliconExpert)., • Experience with configuration management and product lifecycle processes., • Additional Skills & Characteristics:, • Ability to read, analyze, and interpret complex engineering documents and drawings., • Strong communication skills, both written and verbal, to effectively collaborate with internal teams and suppliers., • Familiarity with electrical/electronic manufacturing products and understanding Bill of Materials (BOM) and manufacturing processes., • Experience with obsolescence mitigation strategies., • Prior experience working with environmental compliance standards. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description At TireHub we move more than tires – we move businesses forward, support communities, and help keep America rolling. And behind it all? Our people. We call them Hubbers – because they’re at the center of everything we do. From behind the wheel to the warehouse floor, from customer calls to corporate strategy, every Hubber plays a role in something bigger than themselves. And we show up every day ready to say yes – to challenges, to each other, and to getting it done right. Visit to learn more. The primary role of the Logistics Specialist (LS) involves loading and unloading tires for warehouse storage and/or timely customer delivery, including the unloading and staging of products at the customer’s business location. The LS is expected to represent TireHub professionally in all customer interaction and maintain safe driving practices, all while delivering exceptional customer service and fostering strong customer relationships. When you say YES to something bigger: This position has a starting wage of $20.95 per hour with guaranteed increases of $2.00 over your first year of employment with TireHub. Monday through Saturday – Fluctuating day shift hours Benefits summary: · Paid weekly on Fridays · Premium-Free Hubber Health Insurance · TireHub funded Health Savings Account · Additional benefit options including TireHub paid short/long term disability and life insurance benefits · Paid vacation and holidays PLUS your birthday off! · Parental leave programs · Build your financial future with 401k including TireHub match · Uniform program · Access to tire discounts, perks, and so much more! This position reports to an Assistant TLC Leader. The individual must exhibit the following TireHub core commitments: • Approachable - If a company could smile, we would. Instead, we rely on our people to show it. We care about each other and our customers because we know business only gets done right when people respect each other and value relationships., • Adventurous - What TireHub is set up to do is intentionally outrageous. So, we readily embrace challenges with the courage to introduce new ideas and the ambition to build something unique., • Relentless - We tackle our work with energy. We deliver on our commitments with enthusiasm. And we don't give up until we get to the end. · Delivery Services · Vehicle Maintenance *Adjustments to these allocations are made as business needs evolve • Loads, unloads, inspects, and tallies tires to and from transport vehicles (trailer trucks/box trucks/delivery vans)., • Follows TireHub safety standards with respect to selecting, packing, counting, labeling, and palletizing customer orders and position them in designated locations using the bin locator system., • Operates equipment such as forklifts, order pickers and pallet jacks, ensuring adherence to safety protocols., • Conducts and participates in cycle counts, tallies, and labeling as part of regularly scheduled and annual inventory control procedures., • Collecting payments from customers on Cash on Delivery (COD) transactions., • Ensures vehicles remain clean and in good mechanical/physical condition., • Conducts pre/post-trip vehicle inspections daily and immediately report any operational issues or mechanical defects to the supervisor or designated person., • Completes all the necessary driver and vehicle maintenance logs, on a regular basis., • Ensure compliance with all TireHub policies and procedures., • Participates and maintains ongoing training through in-class, in-person, or computer-based learning modules, as assigned., • Optimizes Work Processes: Knowing the most effective and efficient processes to get things done, with a focus on continuous improvement., • Manages Ambiguity: Operating effectively, even when things are not certain, or the way forward is not clear., • Drives Results: Consistently achieving results, even under tough circumstances., • Collaborates: Building partnerships and working collaboratively with others to meet shared objectives., • At least 1 year of general work experience., • Must have a valid driver’s license., • Must have a mimimum of 2 years of driving history, with a valid driver's license (does not include driver's permit)., • Excellent communication and customer service skills., • Repeatedly lift, pull, push and/or move tires (up to 50lbs) with or without mechanical assistance., • Capable of frequent bending, twisting and lifting., • Multitask in a fast-paced environment., • Accurately and efficiently load, unload and place tires in warehouse and delivery vehicles., • Work up to 35 feet above ground-level., • Work up to 8 hours per day on a forklift., • Follow traffic rules and regulations by safely driving TireHub vehicles to deliver tires to customer locations., • Work independently and as part of a team., • Familiarity with Manifest, GPS and Navigation systems., • Must be able to maintain a forklift certification. · Required to lift, pull, push, and/or move tires (up to 50 lbs. or greater with or without mechanical assistance following standard operating and safety procedures. Other physical requirements including, regularly being required to stand, walk, kneel, bend, crawl, climb and balance. · Maybe required to handle hazardous materials and wear various forms of protective equipment (gloves, protective eyewear, etc.). · Specific vision requirements may include close, distance, color, peripheral visions, depth perception and ability to adjust focus. · Works and operate equipment in various settings, ranging from non-climate-controlled warehouses to customer locations. · Extended day, evening, and weekend work (including Saturday) may be required as job duties demand and may include little to no advanced notice. · Driving during the night or in inclement weather may be required. · Must not exceed 400 pounds in weight or 6 feet 3 inches in height, to meet physical compatibility with equipment and safety restraints. (These limitations are based on equipment specifications and the need to ensure safe operation; any reasonable accommodations will be reviewed in accordance with the Americans with Disabilities Act (ADA) and other relevant laws). TireHub will consider the employment of all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws. TireHub maintains a drug-free workplace in accordance with state and federal law.

Meet needs of the caller as it pertains to bookings, cancellations, and trip verification, while following the policies and procedures of the ADA program. Provide exceptional customer service answering calls in a clear, concise and friendly manner. Must always be mindful of the difficulties faced by

This opening is for an Associate Dentist. At Aspen Dental, we put You 1st, offering the financial security and job stability that comes with working with a world-class Dental Service Organization (DSO). Our best-in-class learning and development training program, competitive compensation, and flexible scheduling will help you thrive in your dental career. Let us handle your business and administrative tasks, so you can focus on what you do best: providing exceptional patient care. Job Type: Full-time Salary: $180000 - $215000 / Year Location-Specific Offers: * Mentorship Available At Aspen Dental, we put You 1st. We offer: * An income potential that’s twice as high as the average private practice* * Full-time, part-time, and flexible scheduling to suit your lifestyle and career goals** * Unlimited access to free continuing education (live and online) to keep your skills and knowledge up to date * The opportunity to own your practice through the Practice Ownership Program * A cutting-edge surgical training center to expand your scope of practice * A fun and supportive culture that encourages collaboration and innovation * A generous benefits package that includes paid time off, health, vision, and 401(k) savings plan (including full benefits for part-time roles) * Back-end support to allow you more time to focus on your patients: finance, IT, marketing, billing, HR, call center, learning and development, plus so much more *Source: ADA Health Policy Institute 2017 Survey of Dental Practice. **May vary by independently owned and operated Aspen Dental location. You’ll achieve success by: * Working with a patient-centric team that respects your clinical judgment and leadership * Assuming excellent quality of care for all patients while adhering to the highest standards of dental practice ethics and professionalism * Conducting comprehensive full mouth exams and diagnosing dental conditions * Offering treatment planning options and discussing them with patients * Providing high-quality clinical treatments with excellence and efficiency * Keeping abreast of new developments in dentistry through continued education and professional development * Networking with professional groups, dental associations, and dental societies to represent Aspen Dental-branded practices in the greater community Qualifications: * Must be a DDS or DMD from an accredited school Be part of a revolutionary dental team reshaping the industry's landscape. As an Aspen Dental Dentist, you'll enjoy the freedom and flexibility to own your practice, backed by the support and resources of a nationwide network of experts. Access the latest technology, top-tier training, and immerse yourself in a rewarding and fun culture. Together, we're making dentistry better for everyone. Aspen Dental-branded practices are independently owned and operated by licensed dentists. The practices receive non-clinical business support services from Aspen Dental Management, Inc., a dental support organization. ADMI Corp., d/b/a TAG-The Aspen Group, its affiliates, related companies and independently owned supported clinical practices are proud to be Equal Opportunity Employers and welcome everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Description Who We Are We’re Dealer Tire, a family-owned, international distributor of tires and parts established in 1918 in Cleveland, OH. We’re laser focused on helping the world’s largest and most trusted auto manufacturers grow their tire business—in fact, we’ve sold more than 60 million tires to date. We’re a thriving company, and we’re looking for driven individuals to join our team. That’s where you come in! Base Pay Range: Warehouse Associate/Driver What’s In It For You We have a dedicated crew of more than 1,500 passionate and innovative associates throughout the United States. Here are a few reasons why we’d make a great team: • Market leading base pay. We offer $22.00 per hour to start., • Level up your pay. Opportunity to increase your base pay as soon as you’ve completed your first 45 days of employment., • Share the gain and play to win. Monthly incentive bonus based upon individual contribution and warehouse team performance., • We respect your need for work-life balance. Our Warehouse Associates/Drivers work primarily first shift Monday-Friday, schedules can vary based on business needs., • Benefits and perks. Medical, Dental, Vision insurance plus a 50% 401k match up to a 7% contribution. PTO eligible after 90 days. Additional perks of wellness programs, annual tuition reimbursement between $2,500-$5,000, and discounts on up to 40 tires purchased per year! Earn up to $1,500 per eligible employee referral., • Adhere to all safety policies and procedures., • Provide “world class” customer service., • Maintain inventory control., • Ensure shipping accuracy., • 21 years or older, • Valid driver’s license, • Ability to pass driver’s road skill test and DOT physical., • Good communication skills in English (bilingual a plus), • Lifting up to 70 lbs. frequently, lifting up to 90 lbs. occasionally, • Continuous standing, lifting, bending and pivoting, • Comfortable at heights up to 25’ while using our top-of-the-line material handling equipment. #zip Why Dealer Tire: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The compensation offered for this position will depend on qualifications, experience, and geographic location. The total compensation package may also include commission, bonus or profit sharing. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dealer Tire is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dealer Tire’s Human Resources Department to discuss your specific needs. Please feel free to contact us at 1-800-933-2537 x6550.

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $22.00- $29.00 hourly, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Test Technician B will perform moderately complex testing procedures to ensure product reliability and performance. This role works under general supervision and supports engineering, quality, and operations teams by conducting testing, troubleshooting issues, and maintaining equipment in accordance with company and regulatory requirements. Key Position Accountabilities: • Set up, operate, and adjust manual and automated test equipment to perform routine and moderately complex testing., • Execute established test protocols to verify functionality and performance of products., • Troubleshoot and resolve moderately complex testing issues, escalating advanced problems to senior technicians or engineering., • Maintain, clean, and calibrate test equipment to ensure accuracy and reliability., • Record test data accurately and prepare summaries for review by engineering and quality teams., • Follow established test procedures and provide feedback on potential improvements., • Support continuous improvement initiatives by identifying ways to improve efficiency and reduce testing errors., • Ensure compliance with all safety standards, including the use of protective gear and safe handling of test materials. Required Knowledge, Skills, and Abilities: • Proficiency with standard electronic test equipment (oscilloscopes, multimeters, auto-test systems, temperature chambers, etc.)., • Ability to perform troubleshooting and resolve routine to moderately complex test issues., • Knowledge of electronic testing procedures and methodologies., • Technical, vocational, or military training in electronics, electrical engineering, or a related field., • 3+ years of experience in a test technician role working with electronic systems or components., • Manual dexterity and hand-eye coordination to use small tools and microscopes., • Specific vision abilities including close vision and the ability to adjust focus., • Ability to remain stationary for extended periods during testing., • Must be able to lift or move items up to 25 pounds. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. This is a Part Time position of 20-24 hours per week. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: PDC, an AS9100-registered electronics manufacturer, is seeking a part-time Calibration Coordinator to support our quality system by managing calibration activities. This temporary role (20 hours/week) ensures compliance with AS9100 and customer requirements through effective coordination and record-keeping. The ideal candidate is a self-starter who can work independently, solve problems proactively, and push through obstacles without constant direction. Calibration activities will be tracked using GagePack. Key Position Accountabilities: Schedule and track calibration of all measurement and test equipment using GagePack. Maintain calibration records and ensure timely updates. Coordinate with external calibration service providers. Monitor due dates and issue reminders to equipment owners. Support audits by preparing calibration documentation. Assist with nonconforming equipment identification and follow-up. Work through routine challenges with minimal supervision. Qualifications: Experience in calibration or quality systems in a manufacturing environment Familiarity with GagePack or similar calibration software Knowledge of AS9100 and basic metrology principles Strong attention to detail and organizational skills Schedule: 20 hours per week; flexible within standard business hours This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description Join the Leading Dental Teams in Long Island - Dental Treatment Coordinator Opportunity with Concerned Dental Care & NowDental Are you an enthusiastic, patient-focused professional skilled in coordinating dental treatments, explaining financial options, and guiding patients comfortably through their dental journeys? Concerned Dental Care of Farmingville & Port Jefferson and NowDental of Suffolk in Smithtown are seeking an exceptional Dental Treatment Coordinator to join our thriving, patient-centered practices. This full-time opportunity allows you to maximize your skills, grow your career, and contribute to outstanding patient experiences within Long Island’s premier dental practices. Why Join Concerned Dental Care & NowDental? • Pay Rate: $25/hr, • Convenient Schedule: Monday to Friday, occasional Saturdays, • Work-Life Balance: Consistent hours and one-hour lunch breaks to support a healthy balance, • Growth Opportunities: Continuing Education (CE) credits, training & development, and advancement opportunities within our respected practices, • State-of-the-Art Facilities: Modern offices with digital charting (Denticon), advanced diagnostic imaging, and streamlined workflows, • Outstanding Reputation: Trusted by Long Island communities with hundreds of 5-star patient reviews and an exceptional standard of care Locations You’ll Serve: Your Role as a Dental Treatment Coordinator: • Collaborate closely with dentists and specialists to present detailed and personalized treatment plans to patients clearly and compassionately, • Verify and clearly explain patient benefits, insurance details, pre-authorizations, and financial arrangements to facilitate informed patient decisions, • Efficiently schedule treatment appointments and coordinate follow-ups to maintain continuous patient care, • Consistently follow up with patients regarding pending treatment and encourage timely completion of recommended procedures, • Manage treatment-related documentation, including consent forms, policy agreements, financial arrangements, and ensure compliance with privacy standards, • Act as a trusted resource for patient inquiries, fostering patient comfort and satisfaction, • Work proactively with front desk and clinical teams to maintain smooth patient flow and communication between departments Qualifications We're Looking For: • High School Diploma or equivalent required, • Minimum of 1 year experience in a dental treatment coordinator or related role (required), • Minimum of 2 years clinical dental experience preferred (dental assisting, patient coordination, front-office experience), • Familiarity with dental software (Denticon or similar preferred), • Knowledge of dental coding (ADA), PPO, HMO, DMO, Medicaid, and Indemnity insurance plans, • Strong communication, organizational, and multitasking abilities, • Ability to work independently, maintain professionalism under pressure, and consistently meet deadlines Interview Process: • 1 Phone Interview, • 1 In-Person Interview at one of our convenient Long Island offices About Concerned Dental Care & NowDental: With a longstanding reputation for excellence, Concerned Dental Care and NowDental provide comprehensive dental services across general dentistry, cosmetic care, endodontics, orthodontics, oral surgery, and periodontics. Our state-of-the-art practices in Farmingville, Port Jefferson, and Smithtown are recognized for compassionate care, clinical innovation, and patient education. We pride ourselves on delivering exceptional care and personalized service to patients of all ages. Join Our Team & Transform Lives Through Outstanding Dental Care If you are a dedicated professional seeking to build meaningful patient relationships, grow your skills, and advance your career within an exceptional dental environment, we invite you to apply. Be the guiding voice patients trust at Concerned Dental Care and NowDental. Apply today and become part of a team that values you! Concerned Dental Care and NowDental are proud affiliates of Affinity Dental Management, equal opportunity employers committed to fostering diversity and inclusivity in the workplace. All candidates are encouraged to apply and will be considered without regard to race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age, disability, or genetic information. Employment is contingent upon successful completion of a background check, reference check, and employment verification. {Dental Treatment Coordinator, Dental Care Coordinator, Dental Financial Coordinator, Dental Patient Coordinator, Dental Office Coordinator, Treatment Plan Coordinator, Dental Insurance Specialist, Front Desk Dental Specialist, Dental Case Coordinator, Dental Patient Relations}

Learn and adapt to current technology needs. Americans with Disabilities Act (ADA).

Service Road [Medical Office Assistant] As a Receptionist at Northwell Health, you'll: Perform a variety of duties relative to admission, discharge and/or transfer of patients; Perform a variety of clerical duties required to maintain accurate charts; Perform a variety of clerical duties essential t

Ajilon - JobID: 3FD752C3-7672-4851-8E54-EEC68B32E0D6 [Medical Office Assistant] As a Medical Receptionist at Ajilon, you'll: Greet patients on arrival and answer telephones encountered in EMR; Verify patients insurance, assure correct information is in patients chart, and distribute HIPAA and consen

Northwell Health - 400 East Main Street [Medical Office Assistant] As a Receptionist at Northwell Health, you'll: Perform a variety of duties relative to admission, discharge and/or transfer of patients; Perform a variety of clerical duties required to maintain accurate charts; Perform a variety of

Customer Service / Remote] - Anywhere in U.Up to $26 per hour / Health, dental & vision / 401k matching / PTO / Equipment provided - As a Customer Support Specialist at Mudflap, you will: Communicate effectively with customers to provide timely and accurate resolutions to their inquiries; Maintain a

Northwell Health - JobID: 21786483 [Medical Office Assistant] As a Receptionist at Northwell Health, you'll: Perform a variety of duties relative to admission, discharge and/or transfer of patients; Perform a variety of clerical duties required to maintain accurate charts; Perform a variety of cleri

Customer Service / Remote] - Anywhere in U.Competitive pay - As a Customer Support Agent at Clerk Chat, you will: Respond to customer inquiries and issues in a timely and professional manner; Maintain a high level of customer satisfaction by providing excellent service and resolving problems effecti

Customer Service / Remote] - Anywhere in U.Competitive pay - As a Client Support Specialist at Baylor Genetics, you will: Communicate effectively with clients via phone, email, and chat to provide exceptional customer service; Collect and document client information accurately and efficiently to ens

Customer Service / Remote] - Anywhere in U.Competitive pay & benefits - As a Customer Support Specialist at Atarim, you will: Communicate with customers via email and chat to provide outstanding support and resolve any issues they may have; Maintain accurate records of customer interactions and tran

Customer Service / Remote] - Anywhere in U.Competitive pay + bonuses / PTO / Employee discount + clothing allowance - As a Customer Experience Agent at Rhone, you will: Provide professional customer support at all times while serving as a front line, go-to resource for all customer needs and inquiri

Customer Service / Remote] - Anywhere in U.Up to $55K per year / Comprehensive benefits - As a Care Experience Specialist at Charlie Health in the Customer Service sector, you'll: Communicate effectively and compassionately with clients and their families; Provide timely and accurate information to

Customer Support / Remote] - Anywhere in U.Competitive pay / Benefits - As a Customer Service Rep at Bush & Bush Law Group, you will: Manage incoming calls, emails, and messages from clients and provide timely and accurate responses to their inquiries; Collect and document essential information from

Customer Service / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k match / PTO - As a Customer Support Specialist at Synapse Health, you will: Provide exceptional customer service to clients and customers; Troubleshoot and resolve any issues or concerns raised by customers;

Customer Support / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at GRT Financial, you will: Handle inbound/outbound calls and emails from clients regarding their accounts; Provide excellent customer service by addressing and resolving cu

Customer Service / Remote] - Anywhere in U.Up to $26 per hour / Medical, dental & vision / 401k match / PTO - As a Customer Care Specialist at Kate Farms, you will: Provide exceptional customer service to all clients; hHandle incoming calls and emails in a timely and professional manner; Troubleshoo

Customer Service / Remote] - Anywhere in U.Up to $78K per year - As a Customer Experience Rep at Alt, you will: Engage with collectors through chat, email, and phone support, providing knowledgeable assistance regarding the auction process, card valuations, and other platform functionalities; Handle

Customer Service / Remote] - Anywhere in U.Health, dental & vision / 401k matching / PTO - As a Member Service Specialist at Workit Health, you will: Go above and beyond to provide world-class member experience to individuals interested in signing up for the program, and throughout the members journ

Call Center / Remote] - Anywhere in U.Benefits - As a Customer Service Rep at Keen, you will: Respond to inbound customer communications by phone, live chat, and email politely and efficiently within a fast-paced environment; Answer product questions from customers and provide solutions based on ind

Customer Service / Remote] - Anywhere in U.Competitive pay / Flexible hours / Health benefits / Retirement plan match / PTO - As a Customer Support Rep at AssetWatch, you will: Provide excellent customer service to clients by answering their inquiries and resolving their issues in a timely and profe

Customer Service / Fully Remote] - Anywhere in U.Competitive Pay - As a Customer Support Rep you'll: Help customers with technical and non-technical inquiries across multiple channels (Email and Live Chat); Engage in meaningful conversations with customers and problem-solve when things don't go quit

Customer Service / Remote] - Anywhere in U.Up to $70K per year / Medical, dental & vision / PTO - As a Customer Experience Specialist at Topicals, you will: Provide exceptional customer service through various channels such as phone, email, and chat; Handle customer inquiries and complaints with emp

Customer Support / Remote] - Anywhere in U.Competitive pay / Health insurance / 401k / PTO - As a Customer Service Coordinator at Cennox, you will: Manage customer inquiries via phone, email, and chat; Provide excellent customer service by resolving issues and answering questions promptly and accura

Customer Service / Remote] - Anywhere in U.Competitive Pay - As a Customer Support Member you'll: Achieve and maintain expert knowledge on the product; Handle customer inquiries in a timely manner; Guide customers through teaching them how to use SmartDreamers and help them troubleshoot issues throu

Customer Support / Remote] - Anywhere in U.Up to $24 per hour / Medical, dental & vision / 401k match / PTO - As a Customer Service Rep at Copart, you will: Manage incoming calls and emails from customers, responding promptly and professionally; Provide accurate and timely information to customers r

Customer Service / Remote] - Anywhere in U.Medical, dental & vision / PTO / WFH Stipend / Equipment provided - As a Customer Experience Advocate at SRPSupport, you will: Provide exceptional customer service to clients through various channels such as phone, email, and chat; Answer incoming customer

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / 401k match / PTO - As a Customer Service Coordinator at One Call, you will: Answer incoming calls and respond to customer inquiries in a timely and professional manner; Provide exceptional customer service by actively listening an

Customer Service / Remote] - Anywhere in U.Up to $26 per hour / Health, dental & vision / 401k matching / PTO / Equipment provided - As a Customer Support Specialist at Mudflap, you will: Communicate effectively with customers to provide timely and accurate resolutions to their inquiries; Maintain a

Customer Service / Fully Remote] - Anywhere in U.Up to $55K per year / Medical, dental & vision / 401k / WFH stipend / Ability to work on the weekends - As a Customer Experience Agent you'll: Handle support requests over phone and email; Help Ramp maintain an industry leading satisfaction rate with

Customer Service / Remote] - Anywhere in U.Competitive pay - As a Client Support Specialist at Baylor Genetics, you will: Communicate effectively with clients via phone, email, and chat to provide exceptional customer service; Collect and document client information accurately and efficiently to ens