Cad jobs in Smithtown, New YorkCreate job alerts

Job Description GSE Dynamics, Inc., a full-service defense engineering and manufacturing company located in Hauppauge, NY, is seeking a full-time seeking a skilled CNC Programmer to join our precision manufacturing team. The CNC Programmer will be responsible for developing advanced CNC programs for 3-, 4-, and 5-axis machines, supporting the machining of a wide range of materials. This role requires expertise in tooling, fixtures, part-holding techniques, and fixture design, along with the ability to train shop floor employees. Responsibilities • Develop, write, and optimize advanced CNC programs for 3-, 4-, and 5-axis milling machines., • Utilize CAD/CAM software (Mastercam) to interpret engineering drawings and convert 3D models into accurate G-code., • Determine the best machining strategies, tooling, feeds, speeds, and part-holding techniques to achieve quality and efficiency., • Design and implement fixtures and part-holding methods to support complex machining operations., • Work with a variety of materials, including aluminum, titanium, steel, composites, Inconel and other specialty alloys., • Analyze and troubleshoot CNC programs and machining issues, making adjustments to ensure precision and compliance., • Collaborate with machinists, engineers, and quality teams to ensure parts meet AS9100 and ISO compliance standards., • Maintain accurate documentation of programs, setups, and revisions., • Work with team CNC operators in the set up and operation of CNC equipment., • Monitor output and proper operation of mechanical equipment., • Use precision measuring instruments including micrometers and calipers and fixtures and gauges to check work., • Read instruments and gauges to accurately measure dimensions on parts within a .001 tolerance., • Maintain company safety requirements. Qualifications: • Minimum 5 years of experience with CNC programming and operating CNC machines., • Skilled in CAD/CAM software (Mastercam), • Proficient in programming 3-, 4-, and 5-axis CNC milling machines., • Strong knowledge of tooling, fixtures, fixture design, and advanced part-holding techniques., • Proficient in understanding of G-code and M-code programming., • Blueprint with GD&T reading capabilities., • Ability to work in a manufacturing environment, lift up to 40 lbs. and support hands-on machining as needed., • Ability to follow written and verbal instructions., • Ability to work independently as well as in a team environment. Requirements: U.S. Citizen Salary Range: $80,000 – $120,000 a year This is an estimated salary range with any actual compensation offers to be dependent upon factors including experience, skill set, qualifications, and other factors allowed by law. Job Type: Full-time FLSA Classification: Exempt Benefits include: Paid Time Off, Medical Insurance, FSA (Flexible Spending Account), Dental Benefit, Aflac Supplemental Insurance, Life Insurance, 401k with company match. EOE / Veteran / Disability Please Contact: Careers@GSEDynamics.com

EnerSys Advanced Systems (EAS) is a specialized division of EnerSys-a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries. As we continue to grow, we're looking for individuals who share a passion for these industries and want to be part of an innovative, dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: • Generous Time Off - 3+ weeks of paid time off, plus 11 paid holidays, • Comprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate, • Financial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan, • 401(k) Matching - 100% match at a 6% contribution level, • Innovative Culture - We value excellence, teamwork, and long-term relationships with stakeholders, colleagues, and customers. Through innovative technology and ongoing training, we invest in our employees' skills and career development.At EAS, we don't just build batteries - we power systems and devices that protect not only individual citizens but communities across the world. If you're excited about working in an innovative, fast-paced, high-tech environment, where your contributions make a real impact, we'd love to hear from you! Compensation Range: $75,000 to $90,000 per year. Compensation may vary based on applicant's work experience, education level, skill set. Learn More About EAS Job Purpose The Manufacturing Engineer at Bren-Tronics, part of EnerSys is responsible for supporting production operations through process implementation and improvement, documentation, equipment optimization, and ensuring product quality and safety. This role works closely with operations, quality, engineering, and supply chain teams to improve efficiency, reduce waste, and maintain compliance with internal and external standards. Essential Duties and Responsibilities • Develop, optimize, and maintain manufacturing processes to improve efficiency, quality, and throughput., • Support day to day production activities by troubleshooting process issues and providing technical guidance., • Function as liaison between Manufacturing and Engineering to smoothly transition newly designed products to production., • Create and update work instructions, process documentation, and standard operating procedures., • Provide training to production operators to fully comply with work instructions, quality standards and engineering requirements, as needed., • Lead and support continuous improvement initiatives, including lean manufacturing and root cause analysis activities., • Design and implement tooling, fixtures, and equipment improvements to enhance production capability and operator safety., • Analyze production data to identify trends, process bottlenecks, and improvement opportunities., • Monitor rework and repair operations, consistently monitor and report yield issues, and regularly highlight significant findings., • Conduct failure analysis, identify root causes, and pursue effective solutions to minimize in-process defects., • Support equipment maintenance, calibration, and layout planning for efficient workflow., • Other duties as assigned. Qualifications • 3+ years in Manufacturing Engineering role, defense Manufacturing industry, strongly preferred., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field., • Understanding of lean manufacturing principles, quality systems, and process control., • Strong teamwork and collaboration with various groups both internal and external., • Excellent communication, written and verbal skills with cross functional teams., • Strong problem solving skills and ability to lead root cause and corrective action efforts., • Proficient with CAD software, SolidWorks a plus. General Job Requirements • Generic EnerSys is always looking to hire top talent. Therefore, we encourage our employees to refer anyone they feel would be a great addition to our organization. Know Your Rights Know Your Rights (Spanish) We use artificial intelligence to screen, assess and select applicants for open positions, including for the purposes of reviewing and ranking application materials and scoring answers to application questions. Accordingly, decisions about your application and eligibility for employment with EnerSys may be made based exclusively on the automated processing of the personal information that you submit in your application materials. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost., • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements., • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches., • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements., • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation., • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection., • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis., • Champion 5S principles, continuous improvement, and EHS compliance throughout the manufacturing environment. WHAT YOU BRING • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred., • Extensive experience reading and interpreting complex technical drawings and specifications., • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software., • Deep understanding of mechanical and electronic assembly principles., • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook., • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail., • Proven ability to lead projects and mentor junior engineers in a collaborative, high-performance environment. Bonus Skills (Preferred but not required): • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry)., • Familiarity with manufacturing standards, process documentation, and ERP systems., • Bilingual in Spanish is a plus. WHO WE ARE: Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

At a Glance Company: Cubitek, Inc. Location: Brentwood, NY (On-site) Job Type: Full-Time Pay Range: $90,000 – $140,000 per year (based on experience) Shift: Day Shift | Monday–Friday | 7:00 AM – 5:30 PM Overtime: Optional Weekends Available Experience Level: Senior (5+ years preferred) Work Authorization: Must be authorized to work in the United States --- Why This Role Exists Cubitek is looking to strengthen its quality department after the loss of a key team member. This role is critical to maintaining the high standards expected by customers in the aerospace, defense, semiconductor, and analytical instrumentation industries. Founded in 1993, Cubitek is a family-owned precision machine shop with more than 30 years of experience producing complex, tight-tolerance components. The company ships approximately 30,000 parts annually and is seeking a hands-on quality professional who can contribute immediately while helping support future growth. --- The Work You'll Be Doing In this role, you will: Perform first article, in-process, and final inspections Program and operate CMM equipment to verify precision machined components Inspect aerospace, defense, semiconductor, and instrumentation parts Interpret engineering drawings, GD&T, and customer specifications Support AS9100 quality requirements and documentation processes Work closely with machinists, production personnel, and management to resolve quality issues Utilize manual inspection equipment when required Help maintain quality records and inspection reports Review STEP files, drawings, and engineering documentation Support continuous improvement initiatives within the quality department --- Machines, Inspection Equipment & Software You'll work with equipment and software such as: Inspection Equipment Hexagon CMM FARO Arm CMM Keyence Vision Systems Optical inspection systems Calipers, micrometers, indicators, and precision measuring equipment Software PC-DMIS JobBOSS ERP CAMWorks Bonus Skills CMM programming CAD/CAM experience Mastercam Fusion 360 Ability to create drawings from STEP files --- Materials You'll Work With Aluminum Stainless Steel Titanium Plastics Ceramics Various aerospace and semiconductor materials --- What We're Looking ForRequired 5+ years of quality inspection or quality engineering experience in a machine shop environment Strong blueprint reading and GD&T skills Experience inspecting precision machined components Familiarity with CMM inspection processes Ability to work independently with minimal supervision Strong documentation and organizational skills Experience supporting AS9100 or similar quality systems Preferred PC-DMIS programming experience Hexagon CMM experience FARO Arm experience Engineering degree First Article Inspection (FAI) experience CAD/CAM experience Aerospace, defense, or semiconductor manufacturing experience --- Why Quality Professionals Like Working Here Quality professionals choose Cubitek because: Family-owned company with over 30 years of stability ISO and AS9100 certified environment Modern CNC machining and inspection technology Diverse aerospace, defense, and semiconductor work Tight-tolerance, technically challenging projects Opportunity to make a significant impact on a small, highly skilled team Direct visibility and collaboration with leadership --- Pay, Benefits & SchedulePay Range $90,000 – $140,000 per year (DOE) Benefits Medical Insurance (80% employer paid) Dental Insurance (100% employer paid) 401(k) with 3% company match Profit Sharing Program PTO and Paid Holidays Additional PTO after 5 years Flexible PTO considerations for exceptional candidates Schedule Monday–Friday 7:00 AM – 5:30 PM Approximately 50-hour workweek Optional weekend overtime --- Apply Interested quality professionals can apply directly through hireCNC. Apply Now or Save This Job to come back later.

Job DescriptionKey Responsibilities • Provide technical leadership throughout the entire product lifecycle, from requirements definition and system architecture through qualification, production, and long-term sustainment., • Lead the design, analysis, simulation, verification, and integration of innovative analog and digital hardware solutions for mission-critical, harsh-environment applications., • Develop and maintain comprehensive technical documentation, including requirements, design specifications, test plans, and verification reports., • Present technical concepts, designs, and results at internal and customer design reviews., • Evaluate and optimize complex engineering tradeoffs involving performance, reliability, manufacturability, cost, schedule, and risk., • Collaborate closely with manufacturing teams, suppliers, and customers to resolve technical issues and support product improvements., • Provide hands-on troubleshooting, root-cause analysis, and corrective action support for both new and legacy products., • Mentor and develop engineering talent, contribute to technical proposals and cost estimates, and participate in technical recruiting and hiring activities.Qualifications, • Bachelor's degree in Electrical Engineering required; Master's degree preferred., • 15+ years of experience in analog and digital circuit design, including A/D conversion, processors/microcontrollers, digital I/O, and communication interfaces., • Strong expertise in power electronics and power conversion technologies, including MOSFET, IGBT, SiC, and GaN devices., • Extensive experience designing DC/DC converters and working with military and aerospace standards, including MIL-STD-1275, MIL-STD-704, DO-160, and MIL-STD-461., • Deep knowledge of electrical and environmental analysis methods, including thermal analysis, electrical stress analysis, worst-case analysis, tolerance analysis, aging analysis, FMEA, EMI/EMC, and radiation effects (SEU and TID)., • Proven experience with printed wiring board (PWB) layout for high-power, high-voltage, and EMI-compliant applications., • Strong understanding of communication protocols including CAN, RS-232/422/485, SPI, JTAG, PCI/PCIe, and 1G/10G Ethernet., • Experience with motor control systems, control theory, Z-domain analysis, Clarke and Park transforms, and sensor interfaces such as LVDTs, resolvers, and encoders., • Proficiency with industry-standard CAD and simulation tools, including LTspice, PSpice, OrCAD, Allegro, MATLAB, and Simulink., • Excellent analytical, communication, and problem-solving skills, with the ability to lead multidisciplinary technical efforts.

Job Description iRocket is pushing the frontier of reusable rocket propulsion. We’re looking for a Turbo Pump Engineer to design, analyze, and test turbomachinery for our reusable engines. The Role • Design, model, build, and test high-performance turbopumps (inducers/impellers/diffusers) for cryogenic rocket engines., • Perform hydrodynamic, aerodynamic, bearing, and rotor-dynamics analysis for rotating assemblies., • Develop manufacturing plans and build books, manage tolerance stack-ups, and ensure as-built compliance., • Monitor performance trends, analyze cavitation, vibration, thrust-balance, and clearance growth., • Execute root-cause investigations, iterate designs to improve cost, lead-time, and reliability., • Work cross-functionally with manufacturing, test, and propulsion design teams. Requirements • Bachelor’s degree in Mechanical or Aerospace Engineering., • 3+ years of turbomachinery or rocket-engine component experience, including design/build/test of turbopumps or related systems., • Strong knowledge of fluid/rotordynamics, cryogenics, bearings, and rotating machine behavior., • Proficiency in CAD (Siemens NX, SolidWorks, etc.), CFD/FEA, and test instrumentation., • Experience with machined, additively-manufactured parts, weldments, fasteners, seals, and rotating assemblies., • Strong communication and documentation skills, and ability to lead hardware workflows to delivery. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Comfort iterating quickly, learning from experiments, and working through ambiguity Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $180,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Senior Electrical Engineer (Analog/Digital) Location: Suffolk County, NY (On-site) Compensation: $120K-$180K Work Authorization: Must qualify as a U.S. Person (export-controlled environment) A well-established, industry-leading manufacturer supporting mission-critical aerospace, defense, and space programs is seeking a Senior Electrical Engineer (Analog/Digital) to join its engineering team. This role will play a key part in the design, development, and lifecycle support of advanced power distribution, generation, and motor control products. What You'll Do • Lead electrical engineering efforts across the full product lifecycle (requirements; design, validation, production support), • Design and develop analog and digital circuits, including power electronics and control systems, • Perform detailed analyses (thermal, stress, worst-case, FMEA, EMI, tolerance, aging) to ensure performance in harsh environments, • Drive technical direction, coordinate cross-functional engineering teams, and support design reviews and customer proposals, • Support new and legacy products through troubleshooting, testing, and continuous improvement initiatives, • Mentor junior engineers and contribute to hiring and team development What You Bring, • 7+ years of experience in analog/digital circuit design (A/D, microcontrollers, I/O, communications), • Strong background in power electronics (MOSFET, IGBT, SiC, GaN) and high-reliability design environments, • Experience with MIL-STD (1275/704, 461) and/or DO-160 standards, power systems, and DC/DC converters, • Hands-on experience with PCB layout for high-power applications and EMI compliance, • Familiarity with communication protocols such as CAN, RS232/422/485, SPI, JTAG, PCI/PCIe, Ethernet, • Experience with CAD/simulation tools (e.g., SPICE, OrCAD, Allegro, MATLAB/Simulink) Nice to Have, • Background in radiation effects for space applications (SEU, total dose, etc.), • Experience with motor control systems and advanced control theory, • Knowledge of sensors (LVDT, resolvers, encoders) Education, • Bachelors degree in Electrical Engineering required; advanced degree preferred This is a high-impact role supporting critical, cutting-edge applications in a collaborative, engineering-driven environment. Ideal for someone who enjoys technical leadership, complex problem-solving, and working on highly reliable In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $120k-$180k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $120,000.00 to $180,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description InProduction is the leading provider of temporary seating, staging, structures, and scenic production for the U.S. live events industry. The Company is a valuable partner to event organizers throughout the entire venue transformation process, with core services including design and fabrication, delivery and installation, on-site execution, and tear down. These services span a variety of end verticals including golf, motorsports, music festivals, other sports & entertainment, and corporate events. InProduction maintains a total commitment to excellence for an exceptional outcome at every event. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://inproduction.net/welcome/ InProduction is looking for talented individuals to join our company to help create and design solutions for high profile nationwide events. The ideal candidate would be able to provide accurate drawings for our sales staff using our drawing library of parts. These drawings would be provided to our customers, building officials and our technicians in the field. The preference would be for candidates that are willing and able to grow with our company as we are experiencing tremendous growth within the industry. Duties and Responsibilities • Collaborate with other team members to achieve functional design solutions against various constraints, • Participate in design reviews and capable of working with site surveys, • Produce code compliant drawings and specifications, • Maintain schedules for each project deadline to ensure that project deadlines are maintained and met, • Responsible for reviewing and verifying drawings in various design modeling software formats, • Capable of detailing drawings that will be used for manufacturing purposes Requirements Education and experience: • Minimum of 4 years of professional experience using AutoCAD required, • Associate’s degree or AutoCAD certification preferred, • Preferred experience in entertainment and events industry (Live Events, Sporting Events/Venues, Theater) Position Requirements: • This job requires you to report to office, • Must have a strong AutoCAD foundation & proficient in creating detailed drawings, • Working knowledge of dynamic blocks and corresponding ability to create/expand upon existing library, • Working knowledge of 3D and programs such as 3DS Max preferred, • Work in a dynamic, driven, & collaborative environment, • Proficiency in PC based computing, Microsoft Office, and use of Windows OS Adobe Creative Suite, • The position requires a background check and drug screening Compensation: $22-26 per hour (based on experience). Benefits • Health, Dental, and Vision Insurance, • Life Insurance, • Education Benefits, • Paid Vacation, • Floating Holidays, • Paid Holidays

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles to enable responsive, lower-cost access to space. We combine advanced propulsion, reuse, and sustainable propellant technologies to push the frontier of commercial space. The Role: We are seeking a Propulsion Engineer to join our propulsion team and contribute to the design, development, testing, and qualification of propulsion systems for our launch vehicles. You will work closely with integration, test, design, and manufacturing teams to bring propulsion systems from concept to flight readiness. • Support design, development, and testing of propulsion systems (e.g. liquid rocket engines, pressure-fed or pump-fed systems, component-level systems), • Participate in test campaigns, including planning, instrumentation, execution, and post-test analysis, • Develop and maintain test procedures, control sequences, and configuration files for propulsion testing, • Troubleshoot issues in propulsion subsystems (fluid, mechanical, thermal) during testing and integration, • Collaborate with cross-functional teams (mechanical, thermal, controls, electronics, systems) to ensure subsystem integration, • Perform calculations and simulations to support sizing, performance prediction, and optimization, • Support Test Readiness Reviews (TRRs), Failure Review Boards, and design reviews, • Implement continuous improvements to increase test efficiency, safety, and reliability, • Analyze test data, generate reports, and identify corrective actions Requirements • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related discipline, • 2+ years of experience in propulsion, test, or fluid/thermal systems development and testing, • Familiarity with liquid or hybrid rocket engine systems, fluid dynamics, thermodynamics, and heat transfer, • Experience with instrumentation, sensors, data acquisition, control systems, • Proficiency with scripting or programming (Python, MATLAB, etc.), • Ability to read and interpret engineering drawings, P&IDs, and technical specifications, • Strong problem-solving, data analysis, and communication skills, • Ability to work in multidisciplinary teams and in a fast-paced, evolving environment, • Experience with cryogenic fluids, high-pressure systems, or oxidizer/fuel systems, • Experience with CAD, simulation tools (CFD, thermodynamics, structural), or propulsion modeling, • Familiarity with propulsion test stands, plumbing, valve systems, or turbomachinery, • Experience in space, launch vehicle, or high-reliability systems, • Experience in formal test planning, instrumentation, and control software Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Design and Sales Consultant provides an in-home customer experience by designing and selling cabinetry, closets, home offices, garages, media centers, and other storage solutions for homes. This position includes selling, designing, measuring home spaces, and providing an exceptional experience. What We Offer: California Closets has both company-owned and franchise locations. This location is company-owned, therefore earns the following benefits: • Health insurance – Medical, Dental, and Vision, • Training pay, • A generous compensation package that includes a paid training program, commission, and bonuses, • Commission pay range from $65,000 up to $200,000 annually, • Initial and ongoing training on products, CRM, and proprietary CAD software, • Qualified leads and an excellent environment in a refreshingly open culture alongside individuals who love to exceed expectations Franchises are independently owned and operated and may offer different benefits. Duties and Responsibilities: • Design organization units for customers utilizing our proprietary CAD software program., • Utilize a consultative sales approach to meet monthly sales goals., • Telecommute to customers’ homes for a needs analysis and to design a storage unit, • Participate in meetings and training sessions, • Continuous follow-up with the customers and collaboration with the installation team to ensure job completion., • Pursue referrals and repeat business., • Meet or exceed monthly and annual sales related goals and targets., • This is a full-time (40 hours/ week) opportunity #ny032 Qualifications • Interior design education, direct industry experience, or proven passion for home décor., • Manage and engage customers through an exceptional experience where the consultant is the reason for repeat clients., • Professional and assertive, consultative sales skills., • Advance knowledge of Microsoft suite and experience working with laptops, tablets, and other electronic devices., • Previous experience with Salesforce, CAD or design software is a plus., • The ability to be consistently inspiring and create delightful customer and brand experiences., • Confidently be able to sell and promote a product., • The ability to be creative, yet meticulously detail-oriented with a sense of craftsmanship., • Team player with the ability to manage a portfolio of projects and clients of different complexity in a dynamic environment. Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: https://www.californiaclosets.com/privacy-policy/ Terms and Conditions: https://www.californiaclosets.com/terms-conditions/

Job Description We are seeking an Account Manager (Technical Sales, Furniture) to join our team! You will resolve customer questions and offer solutions to drive company revenue. Act as a point of contact for various high-level projects and communicate with sales, engineering, manufacturing, and production to ensure schedules are followed and expectations are met. Responsibilities: • Present and sell company products and services to new and existing customers, • Communicate within various departments to ensure all parts ordered and production is proceeding on-time, • Prospect and contact potential customers, • Reach agreed upon sales targets by the deadline, • Resolve customer inquiries and complaints, • Set follow-up appointments to keep customers aware of latest developments, • Create sales material to present to customers Qualifications: • Must be able to read and manipulate drawings AutoCAD, REVIT, and/or INVENTOR software, • Previous experience in sales, control rooms, broadcast, customer service, or other related fields, • Familiarity with ERP / CRM platforms, • Ability to build rapport with clients, • Strong negotiation skills, • Deadline and detail-oriented Company DescriptionTBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.TBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 5-10 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Experience in propulsion, space, or high-reliability systems Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Are you looking for a career that challenges you and gives you the opportunity to learn and grow every day? Oliver Inc. is hiring! Our growing Company is looking for enthusiastic talents to partner with our customers for all their printing and packaging needs! With more than 250 years of experience, multiple production facilities, and investment in state-of-the-art technology with an emphasis on sustainability, Oliver Inc. offers speed, consistency and nimbleness as a one-stop solution for all of your printing & packaging needs. At Oliver Inc, our core values are part of the framework of our organization. We're passionate and enjoy our work! We value respect and focus on servicing our customers' needs by providing them with creative solutions that help build their brands. When you partner with Oliver, you partner with success. We are currently seeking an experienced Die Cutting Operator to join our team. The ideal candidate has a background in printing or packaging and experience operating die cutting equipment. This role is responsible for setting up, adjusting, monitoring, and operating die cutting machinery; completing make-readies; pulling samples; verifying accuracy; and ensuring the highest level of product quality throughout the run. If you want to join a people-centered company with a strong team culture, we encourage you to apply. SHIFTS - 2nd or 3rd Shifts About the Role As our Die Cutting Operator, you will: • Adjusts and operates die cutting machine preparing all processes required (ex. Stripping, blanking)., • Maintains and performs minor repairs on equipment., • Ensures total quality of the job while in operation., • Works in a fast-paced environment and demonstrates teamwork spirit., • Performs preventative maintenance and minor repairs on equipment., • Conducts all activities in a safe and efficient manner. About You: You're a fit for the role of Die Cutting Operator, if your background includes: • Previous experience as a Die Cutting Operator or Die Cutting Pressman in the printing, packaging, or folding carton industry., • Hands-on experience with steel rule dies, counter plates, make-ready materials, and stripping/blanking tools., • Strong understanding of paperboard substrates (SBS, CCNB, Kraft, etc.) and how they affect cutting, scoring, and creasing., • Ability to read and interpret job tickets, CAD layouts, die lines, and quality specifications., • Proven ability to complete accurate make-readies with minimal supervision., • Mechanical aptitude and strong troubleshooting skills with die cutting equipment., • Familiarity with Bobst, Heidelberg, or similar equipment (preferred)., • Solid math skills and ability to measure tight tolerances., • Excellent attention to detail and quality standards., • Ability to lift 50+ lbs, stand for long periods, and work in a manufacturing environment., • A positive, team-oriented attitude and strong work ethic. Why Join Us? • Competitive pay and a full benefits package, • Monthly Employee Appreciation Days, • A culture that values growth, teamwork, and continuous improvement, • Modern equipment and a clean, safe working environment Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description Do you turn CAD layouts into flawless blanks? If you know your way around steel rule dies, counter plates, and make‑ready materials—and can bring a die‑cutter up to spec with speed and precision—let’s talk. Oliver Inc. is expanding and looking for a Paperboard Die‑Cut Technician who thrives in a fast pace and cares deeply about quality. Why Oliver? • More than 250 years of expertise with multiple production facilities., • State‑of‑the‑art technology and a commitment to sustainability., • A people‑first culture that is passionate, respectful, and focused on helping customers build their brands., • Long‑term stability and growth opportunities. Is this you?, • Experienced Die Cutting Operator/Pressman from printing, packaging, or folding carton., • Pro with steel rule dies, make‑ready kits, and stripping/blanking tools., • Understands SBS, CCNB, Kraft, and how substrates affect cutting, scoring, and creasing., • Reads job tickets, CAD layouts, die lines, and quality specs with confidence., • Can complete accurate make‑readies with minimal oversight., • Mechanically inclined; skilled at troubleshooting die‑cut equipment., • Familiar with Bobst, Heidelberg, or similar equipment (preferred)., • Comfortable measuring tight tolerances; strong math skills., • Detail‑driven with high quality standards., • Able to lift 50+ lbs, stand for long periods, and work safely in manufacturing., • Positive teammate with a strong work ethic. What you’ll do, • Set up, adjust, and operate die‑cutting machinery, including stripping and blanking., • Execute make‑readies and pull samples; verify accuracy against specs., • Monitor in‑run quality and make on‑the‑fly adjustments as needed., • Perform preventative maintenance and minor repairs., • Work safely and efficiently as part of a collaborative team. Schedule Opportunities available on 2nd or 3rd shifts. Total rewards • Competitive compensation + overtime potential, • Medical, Dental, Vision coverage, • 401(k) with company match, • Paid Time Off & Holidays, • Modern equipment in a clean facility, • Supportive, team‑oriented culture Equal Opportunity Oliver Inc is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, national origin, religion, gender, gender identity and expression, sex, sexual orientation, disability, age, citizenship status, veteran status or any other characteristic protected by applicable federal, state or local laws. Ready to join a company where speed, consistency, and nimbleness come standard? Apply today.

Job Description Mechanical Engineer Behlman Electronics, a leading power supply design firm located on Long Island, NY which was founded over sixty-five years ago as an engineering, manufacturing, and consulting firm for power products. Over that time, it has grown to become a leading power solutions provider for applications demanding cutting edge performance for commercial, industrial, and military mission-critical applications, is looking for a motivated technically minded individual for a position on its Engineering Team Job Description: The selected candidate will be expected to execute in a small, yet diverse, team environment through all phases of the product life cycle, this includes concept development, detail design, qualification, manufacturing transition, and production support. The engineer will be responsible for supporting the development of innovative and robust power supply solutions to meet demanding customer requirements and will leverage their mechanical engineering expertise to perform detailed design and analyses. Day to day, activities include working with 3D solid models, drawings, performing analyses to assure fit & function; performing thermal, structural/stress, and vibration analyses; assessing designs against environmental requirements. Desired Skills and Education: • Required Education: Bachelor's Degree in Mechanical Engineering or equivalent degree, • 3-5 years of relevant experience preferred., • Knowledge in fundamentals of mechanical design, analysis, and documentation principles, • Experience in Electronics Packaging and thermal simulation and analytical techniques. (Computational Fluid Dynamics, Finite Element Analysis etc)., • Experience with CAD development tools such as Inventor, Solidworks or Creo., • Strong written and verbal communication skills, • Motivated self-starter and problem solver with ability and desire to work in diverse multi-disciplinary teams Compensation & Benefits: Salary - $90,000 - $100,000 Based on Experience. 401K Health Insurance Vision and Dental Insurance Life Insurance Paid Time off (Vacation, Holidays, sick leave etc.) Flexible Spending Accounts Tuition Assistance End of year time off Opportunities for advancement This is an on-site position and candidates must be a US Citizen or Permanent Resident. Company DescriptionBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power productsBehlman Electronics Inc., an ISO 9001:2008 company, designs and manufactures a wide array of power products

Job Description Join iRocket for a Summer 2026 internship and get hands-on experience building reusable space-launch vehicles. Interns will be embedded in teams across propulsion, avionics, manufacturing, test, launch operations, and data. This is a chance to contribute to real hardware, real tests, and real launches. The Role • Work on meaningful projects under mentorship from senior engineers., • Contribute to hardware design, test campaigns, manufacturing workflows, data-pipelines, or launch readiness tasks., • Participate in team meetings, hardware builds, data reviews, and test/launch operations., • Present your summer project outcomes to the broader team at program end. Requirements • Currently enrolled in a Bachelor’s or Master’s program in Engineering, Computer Science, Data Science, or related technical field., • Strong academic performance, interest in space/launch, and ability to work in a fast-paced, multidisciplinary environment., • Experience with CAD, coding, data analytics, lab/test work, or manufacturing is a plus., • U.S. Citizenship or eligibility to work in the U.S. without sponsorship.

Job Description We’re looking for a skilled millworker who doesn’t just build—but understands how things come together from concept to completion. This role sits at the intersection of hands-on fabrication and digital precision. You’ll be responsible for building high-quality custom displays, signage, and branded environments—while also creating accurate CAD drawings that drive CNC production. If you can only build, this isn’t the role. If you can only draw, this isn’t the role. We need someone who can do both—and understands how one impacts the other. What You’ll Do • Fabricate custom signage, displays, and architectural elements using wood, plastics, and mixed materials, • Translate design concepts into detailed CAD drawings ready for CNC production, • Create shop drawings, cut files, and layouts that ensure efficient, accurate builds, • Work closely with design, project management, and production teams to bring ideas to life, • Understand materials, joinery, tolerances, and finishes—and how they impact fabrication, • Set up and optimize files for CNC routers and digital cutting systems, • Problem-solve in real time—adjusting designs to improve buildability and efficiency, • Maintain a high standard of craftsmanship and attention to detail What We’re Looking For • Strong hands-on millwork / fabrication experience (not just assembly), • Proficiency in CAD software (AutoCAD, Fusion 360, Rhino, or similar), • Experience preparing files for CNC production (toolpaths, nesting, etc.), • Deep understanding of how things are actually built—not just drawn, • Ability to think through construction details before they become problems, • Experience with signage, branded environments, or custom displays is a major plus, • Comfortable working in a fast-paced, production-driven environment, • Takes pride in clean work, smart solutions, and getting it right the first time Why This Role Matters At 71 Visuals, we don’t just make signs—we build branded environments that people experience. This role is critical in bridging the gap between design intent and real-world execution. Your ability to both build and detail directly impacts quality, efficiency, and the final product our clients see. Bonus Points • Experience with Kongsberg or similar digital cutting systems, • Knowledge of large-format printing and signage materials, • Ability to prototype and mock up concepts quickly, • Familiarity with installation methods and field conditions Bottom Line We’re looking for someone who can walk into the shop, understand how something should be built—and then go to their computer and create the exact files to make it happen efficiently. If that’s you, you’ll fit right in. Company Description71 Visuals has been in business since 1971. We are employee-focused and our team is the most important part of our success. Our expertise is in office interiors, retail displays, and event activations. Through our creative visual communication and unexpected signage approach, we achieve increased engagement with potential customers, employees, and the overall brand. It starts with solid designs from our design staff, who work closely with our production and installation team. Communication with the project management teams provides the very best in client services.71 Visuals has been in business since 1971. We are employee-focused and our team is the most important part of our success. Our expertise is in office interiors, retail displays, and event activations. Through our creative visual communication and unexpected signage approach, we achieve increased engagement with potential customers, employees, and the overall brand. It starts with solid designs from our design staff, who work closely with our production and installation team. Communication with the project management teams provides the very best in client services.

Job Description We are seeking a dynamic and innovative Project Designer to join our fast-paced, design-build company dedicated to delivering exceptional interior design (layouts, finishes, scope) solutions. In this role, you will be the creative force behind conceptualizing and developing comprehensive design plans that align with client visions and project goals. Your expertise will drive the entire design process from initial concept through detailed drafting, rendering, & construction design pacakges, ensuring seamless integration with construction and project management teams. This position offers an exciting opportunity to shape inspiring spaces while collaborating closely with clients, contractors, and internal teams to bring visionary projects to life. Duties • Develop innovative design concepts for a variety of projects including renovations, interiors, and new constructions using AutoCAD, Revit, SketchUp, and Adobe Creative Suite., • Prepare detailed construction documents, drafting plans, sections, elevations, and 3D models that meet project specifications and building codes., • Coordinate with project managers and engineers to establish accurate project scheduling, budgeting, and construction estimating parameters., • Utilize Bluebeam for document review, markups, and collaboration on design drawings and specifications., • Contribute to interior design aspects by selecting materials, finishes, furniture layouts, and lighting solutions that enhance aesthetic appeal., • Support renovation projects by integrating existing structures into new designs while maintaining structural integrity., • Working directly with our residential construction clients to help them design their space, selection their finishes and guide them in a quick and efficient manner to obtaining their dream renovation seamlessly. Requirements • Proven experience in architectural or interior design within a design-build environment or similar setting., • Proficiency in AutoCAD, Revit, SketchUp, Adobe Creative Suite (Photoshop, InDesign), CAD software tools, 2020 and Archsynth, • Strong knowledge of construction processes including estimating, budgeting, scheduling (project scheduling), and construction management principles., • Experience in project management software for tracking progress and coordinating teams effectively., • Strong understanding of renovation processes as well as interior design principles including space planning and material selection., • Exceptional communication skills to collaborate across multidisciplinary teams while maintaining clear documentation of all project phases., • Join us to be part of a vibrant team where your creativity fuels inspiring spaces! We value innovation, collaboration, and dedication, empowering you to grow professionally while making a tangible impact on every project you touch.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Drive iterative improvements, material science evaluations, cost-down strategies, and supply-chain integration. Requirements • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Excellent teamwork, documentation, and process-improvement mindset. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers Build new RF and microwave circuits, components, and products Perform linear and nonlinear simulations for active and passive circuits Define specs for microwave components and subassemblies Support high-reliability testing and screening requirements Generate design reviews, test reports, and documentation Work with manufacturing teams to ensure efficient build processes Estimate project schedules, track engineering labor, and support technical proposals What You Need Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ At least 2 years designing and simulating low noise amplifiers Experience designing passive RF/microwave components (couplers, dividers, attenuators) Experience designing for manufacturability and managing engineering projects Proficient with linear CAE tools plus exposure to nonlinear CAE Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators Ability to work under a microscope in a cleanroom environment Familiarity with semiconductor devices like GaAs and GaN Strong communication skills Must be able to obtain a Secret-level security clearance Preferred Experience Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 Experience aligning and tuning fine-pitch circuits under a microscope Knowledge of oscillator, synthesizer, PIN-diode, and filter design System-level cascade and spur analysis Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools CAD familiarity: AutoCAD, Inventor Design/test experience up to 26 GHz or higher (40 GHz preferred) Hybrid chip-and-wire and PCB SMT manufacturing exposure Wire bonding experience

Job Description Well established technical furniture manufacturer in Western Suffolk, Long Island is seeking an experienced, motivated Draftsperson with expertise in AutoCAD and/or Autodesk Inventor and willingness to learn. Interest in technical furniture, wood working, and custom design is a strong plus. Responsibilities: • Detail technical furniture designs in AutoCAD, Inventor, and/or Solidworks for design and production, • Prepare and produce shop drawings for the manufacture and installation of TBC products, • Understand our products to compile Bills of Material (BOM) as required, • Facilitate the completion of our projects by interacting with sales personnel to provide accurate drawings for production Skills: • Minimum 4 years in CAD software (AutoCAD and/or Inventor), • Ideally at least 2 years CNC programming experience (MasterCam and/or Fusion), • Understanding of BOMs, • Work independently and as part of our design / engineering team Qualifications: • Experience in manufacturing, technical sales, and customer service, • Ability to build rapport with clients, • Strong negotiation skills, • Deadline and detail-orientedCompany DescriptionTBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.TBC designs, manufactures, and installs technical furniture systems. Our focus is building consoles, from single operator desks to sophisticated 24/7 control room furniture; we provide the products and the expertise to create ergonomically correct and organized work spaces that lead to greater efficiency, productivity and personal performance.

Job Description Job Title: CAD Designer – 3D & Graphic, Tara Toy Department: Product Design Reporting To: Director, Product Design Location: Hauppauge, NY Salary: $80,000 - $90,000 annually Company Overview: Just Play is a passionate and trend driven leader in the children’s consumer goods industry. Our products are an impressive mix of promotional and everyday items for the whole family. We work with the world’s leading children’s entertainment brands to manufacture and distribute exceptional products to every major mass retailer throughout North America and around the world. Job Summary: We're a fast-moving toy company looking for a versatile and experienced CAD Designer to join our creative team. This role is ideal for someone who can primarily work on 3D product design but is willing and able to take on occasional graphic design tasks like packaging, branding, and licensing work when needed. If you're passionate about toys, love to collaborate, and can keep pace with tight timelines, we’d love to hear from you. This is not a hybrid role, and being on site five days a week is required. Principal Responsibilities: • Create detailed and accurate 3D CAD models for toys and related products., • Develop technical drawings and files for prototyping and manufacturing., • Collaborate with product development, marketing, and licensing teams to ensure cohesive design execution., • Support license-based design work, adapting assets for various product lines and packaging formats., • Work on multiple projects in a fast-paced, team-oriented environment., • Occasionally design packaging layouts, branding elements, and presentation materials. Minimum Qualifications: • 3+ years of experience in CAD design, preferably in toys, consumer products, or similar industries., • Proficiency in 3D software such as SolidWorks, Blender, ZBrush, Rhino, Fusion 360, or similar., • Graphic design skills with hands-on experience using Adobe Creative Suite (Illustrator, Photoshop, InDesign)., • Comfortable working on both original products and licensed IPs., • Highly organized with strong attention to detail and ability to meet deadlines., • Experience in the toy industry or children’s consumer products preferred., • Understanding of toy safety standards, prototyping, or manufacturing processes preferred., • Illustration or rendering skills preferred., • Fluency in English (both written and verbal)., • Please include a copy of, or link to, your portfolio for review. Just Play is an equal opportunity employer. We welcome all applicants without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description The InProduction team has spent the better part of the last decade combining the best seating and staging companies into a one-stop shop for most of what is needed to produce an event. Starting with SGA Production Services, we added and integrated T&B Equipment, CommuniLux Productions, Nussli U.S., and Seating Solutions to become today’s InProduction. These acquisitions have allowed InProduction to evolve into the largest provider of temporary seating, staging, structures, and scenic production for the United States events industry. The Company is backed by ZMC. ZMC is a leading private equity firm comprised of experienced investors and executives who invest in, and manage, a diverse group of media and communications enterprises. Founded in 2001, ZMC’s investment philosophy centers on operational value creation driven by targeted investment themes, deep sector expertise, and strong partnerships with industry and operating executives. ZMC approaches its investments in collaboration with management teams and has a successful track record of actively adding value to portfolio companies. Come join us! Check out our web page https://www.inproduction.com/ InProduction is seeking a highly skilled Technical Designer proficient in Autodesk Revit to support the design, documentation, and execution of complex temporary and permanent event structures. This role plays a critical part in translating conceptual designs into accurate, build ready construction documents while coordinating closely with engineering, fabrication, and project management teams. The ideal candidate is technically strong, detail oriented, and comfortable working in a fast paced, deadline driven environment supporting large scale live events, sporting venues, and specialty structures. Key Responsibilities : • Develop detailed Revit models and construction drawings that are code compliant, fabrication ready, and installation-accurate, • Translate design concepts, engineering inputs, and field requirements into fully coordinated drawing packages, • Maintain and manage Revit models, including families, templates, views, and sheets, • Coordinate with engineering, project management, CAD/design teams, and field personnel throughout the project lifecycle, • Revise and update drawings efficiently to reflect design changes, RFIs, and site conditions, • Participate in design reviews, production meetings, and project handoff meetings, • Ensure drawing accuracy, dimensional integrity, and constructability, • Support QA/QC processes for drawing deliverables and model standards, • Contribute to continuous improvement of design workflows, standards, and Revit best practices Requirements Required Qualifications: • Proven professional experience as a Technical Designer, BIM Designer, or Revit Designer, • Advanced proficiency in Autodesk Revit (architecture or structure focused), • Strong understanding of construction documentation standards and coordination, • Excellent spatial reasoning and attention to detail, • Ability to manage multiple projects and deadlines simultaneously, • Strong communication skills and ability to collaborate across disciplines, • Proficiency with Windows-based PC environments and Microsoft Office Preferred / Plus Qualifications: • Experience in temporary structures, event infrastructure, staging, seating, or modular construction, • Familiarity with AutoCAD, Fusion 360, or related Autodesk platforms, • Understanding of fabrication workflows and constructability, • Experience working with engineers and structural calculations, • Knowledge of BIM standards, model coordination, and drawing control, • Ability to support 2D and 3D workflows across multiple software platforms Education & Experience • Associate’s or Bachelor’s degree in Drafting, Design, Architecture, Engineering Technology, or related field preferred, • 5 to 10 years of Revit experience, • Equivalent industry experience will be considered in lieu of formal education Work Environment & Requirements • Fast-paced, project driven environment, • Background check and drug screening required, • Some travel and flexible working hours may be required based on project demands Compensation : $80 K- 105 K Benefits • Competitive compensation, • Health, Dental, and Vision Insurance, • Life Insurance, • Paid Time Off (PTO) and paid holidays, • 401(k) plan with company match, • Opportunity to work on high profile national events and venues

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job Description Manufacturing Engineer Overview VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. VJ X-Ray is seeking a detail‑driven, process‑oriented Manufacturing Engineer to make an impact with our engineering change processes, product documentation, and manufacturing support activities. This role sits at the intersection of engineering, operations, and product lifecycle management, ensuring that product data is accurate, controlled, and communicated clearly and concisely across the organization. This position is ideal for someone who excels at documentation, cross‑functional coordination, and keeping complex product information organized and flowing smoothly. Essential Skills/Job Duties: • A bachelor’s degree in mechanical engineering (or closely related field), • A minimum of one (1) years’ experience in an advanced technology manufacturing environment supporting Production and Engineering initiatives., • Engineering Change Notice (ECN) processes, including creation, review, and approval. Ensure changes are implemented accurately and on schedule across multiple sites, • Create, structure, and maintain Bills of Materials throughout the product lifecycle, • Must be able to read and assess 2D & 3D CAD design specifications (SolidWorks preferred) and the ability to read and interpret detailed mechanical drawings, • Validate accuracy and alignment with design specifications and customers’ needs, • Maintain part numbers, revision histories, and source information within the ERP system, • Develop, update, and maintain clear, visual, and accurate manufacturing work instructions, standard operating procedures (SOPs), and assembly guidelines in accordance with company standards, • Create and maintain process documentation, routing and work orders, • Collaborate with engineering, supply chain, quality, and production teams to resolve documentation issues and support smooth production operations, • SAFETY: VJ X-Ray is a large, robust, complex manufacturing environment, and safety for our employees is paramount, so we all strive to be proactive and current with our safety procedures and protocols., • Identify opportunities to streamline documentation, change processes, and product data workflows, • Ensuring data accuracy and data analysis within our ERP system (Global Shop Solutions-GSS) Non-Essential Skills • Experience with manufacturing processes, • Proficient CAD experience designing models and components in SolidWorks (SolidWorks certification a plus), • Knowledge of Lean Manufacturing / Six Sigma., • Conversant in Chinese (Mandarin) Physical Demands and Mental Demands: • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Use judgement and sound reasoning to make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description Role overview We’re hiring a Senior Machinist: CNC / GD&T / G&M Code / Setup with hands-on experience setting up and running multi-axis CNC equipment. You’ll own setups end-to-end, help prove out new programs, and support both R&D builds and short production runs. What you’ll do • Read and interpret engineering drawings, setup sheets, and related documentation; apply GD&T requirements., • Set up and operate multi-axis CNC milling and turning equipment (including mill-turn / live tooling where applicable)., • Configure workholding and fixtures (vise, soft jaws, tombstones, custom fixtures) per setup documentation and best practices., • Run, validate, and help prove out new CNC programs; support first-article / first-piece verification., • Diagnose machining issues and make minor program/parameter adjustments (feeds/speeds, offsets) during runs., • Perform in-process and final inspection using standard precision metrology tools; document results as required., • Maintain machines and work area (basic preventive care, cleanliness, chip/coolant management)., • Adapt between fast-turn prototype/R&D work and short-run production while maintaining quality and repeatability. About the team The CNC Machining team works directly with the engineering and manufacturing teams to produce precision components for propulsion and vehicle systems. About iRocket Founded in 2018, Innovative Rocket Technologies Inc. is revolutionizing the space industry as the first fully autonomous and 100% reusable rocket manufacturer. iRocket is building the world’s first reusable rocket engines with a setup focused on reusability from the beginning, including high performance and long life. We will Recondition, Reload, and Relaunch™ our rockets synonymous with how we use airplanes today for multiple daily flights in under 24 hrs. achieving reusability 2.0. Utilizing cutting-edge 3D printing and additive manufacturing technology, we’re dedicated to providing reliable and rapid access to space at a low cost. Our innovative design addresses the inefficiencies in the industry, while our proprietary reusable engine technology positions us as the leading small launch service provider. Join us on our journey to space. Requirements Required qualifications • 3+ years experience as a CNC machinist/operator and setup technician in a precision environment., • Must be proficient in G-Code and M-Code programming with the ability to troubleshoot, edit, prove out processes, perform first piece runs, and recommend changes to programs on multi-axis machine tools proficiently., • Experience with multi-axis machining (3+1 / 3+2); familiarity with complex toolpaths and 3D surfaces., • Experience with live-tooling lathes, mill-turns, or multi-task machines., • Working knowledge of machining a range of materials (e.g., aluminum alloys, stainless, alloy steels, and other engineering materials)., • Solid understanding of tooling, tool life, cutters, and fixturing methods., • Intermediate ability to interpret and apply GD&T., • Able to take ownership of the setup and run process from start to finish; comfortable juggling multiple competing priorities., • U.S. Person status required due to access to export-controlled technical data. Preferred qualifications • Experience with simultaneous 5-axis setup and operation., • Experience working with Okuma CNC machines and controllers., • Comfortable referencing a CAD model to verify dimensions/features (model-based measurement)., • Experience with CMM inspection (e.g., PC-DMIS or similar)., • Waterjet experience. Additive manufacturing exposure (e.g., FDM/SLA) and/or post-processing familiarity. Benefits What we offer • Competitive hourly pay at $33/hr-$43/hr (commensurate with experience), • Benefits: [Health/Dental/Vision/401(k)/PTO], • High-impact work on real aerospace hardware, • Fast-paced environment with direct collaboration across engineering, test, and manufacturing

Job DescriptionCompany Description Founded in 1978, California Closets has built a reputation as the leader and design authority in premium space management, delivering custom-designed organizational solutions and exceptional service. We believe home is more than just a place — it should be a source of creativity, comfort, and connection. From beautiful walk-in closets and entertainment centers to versatile pantries and home offices, we design custom storage solutions that add value to your life and home by making space for what belongs. Think of it as ‘practical magic.’ Job Description The Installation Tech installs custom designed residential storage systems and accessories using a variety of luxury materials. A successful candidate will have experience with hand and power tools, measurements and the ability to provide exceptional customer service to our clients. What We Offer: California Closets has both company-owned and franchise locations. This location is company-owned, therefore earns the following benefits: • Health insurance – Medical, Dental, and Vision, • PTO days and paid holidays, • 401K retirement plan with profit share contribution, • Transportation from Company’s location to and from customer job sites will be provided, • Company tools and PPE provided, • Guaranteed 40 hours/week with overtime potential, • Day shift hours, • Grow your career with us – many promotional opportunities available, • Working with luxury products and 100% custom builds, • Hourly pay from $20 and up to $30 per hour, paid weekly. Franchises are independently owned and operated and may offer different benefits. Duties and Responsibilities: • Perform skilled and semi-skilled carpentry work to install custom storage systems such as closets, cabinets, offices, and other spaces in the home or commercial buildings., • Utilize company-provided CAD drawings\blueprints to install systems properly and efficiently., • Assemble and install systems of varying complexity., • Assists in the removal and installation of materials in customer homes., • Maintain shop tools and equipment in safe working order (tools are provided)., • Install systems independently or with team members depending on the size of the job., • Provide a high level of customer service for in-home installations., • Maintain safety standards at all time., • Responsible for driving to and from customer sites and operating a company-provided vehicles in a safe manner., • Perform other duties and responsibilities as assigned by the supervisor. #ny032 Qualifications • Must maintain a valid driver's license and clean driving record, • High School diploma or equivalent, • Experience with common hand and power tools, • Trade or vocational school experience desirable, • Cabinetry or carpentry skills desirable, • Strong verbal and written communication and listening skills, • Able to walk, lift 50 pounds, reach, stoop, stand, grasp, balance, climb stairs, kneel, and crouch Additional Information Find us on Facebook, YouTube, and Instagram We are an equal opportunity employer. We E-Verify. All your information will be kept confidential according to EEO guidelines. Privacy Policy: https://www.californiaclosets.com/privacy-policy/ Terms and Conditions: https://www.californiaclosets.com/terms-conditions/

Join our Field Design & Service Center Team! Whether you are just starting your career or an experienced Jeweler, we have plenty of opportunities for your growth and success. Start as an Apprentice Jeweler completing administrative/clerical tasks and polishing jewelry, and work toward becoming a Bench Jeweler. We are also looking for candidates with knowledge of stone setting, sizing, polishing and jewelry repair. Working with our team gives you the opportunity to advance from beginner to artisan in a unique promote-from-within environment. Signet Jewelers, the world's largest specialty retail of diamond jewelry, is currently seeking entry-level Jewelers and experienced Jewelers to join our Field Design & Service Center Teams! Whether you are just starting your career as a Jeweler or are an experienced master level Jeweler, we have plenty of opportunities for your growth and success. Working with our team gives you the opportunity to advance from beginner to artisan in a promote-from-within environment. We offer unique Jeweler training programs and continuous learning to advance your skills from entry level to experienced Jeweler! At Signet Jewelers, you'll use your talent to restore jewelry to its original, breathtaking beauty all the way to designing stunning, one-of-a-kind, custom jewelry depending on your current skillset. Our Design & Service Center Team Members are dedicated to delivering a Customer -First experience that exceeds our customers' expectations for custom jewelry design and repairs. We offer highly competitive pay that is reflective of your current jeweler skillset and experience. • Chain and clasp repair, • Re-tipping prongs, • Setting stones, • Creating stone mountings, • Performing channel and platinum rebuilds, • Performing minor ring repair and other jewelry repairs, • Wax carving, • Fabrication, • Casting, • Custom design and creation of pieces, • CAD / CAM design work, • High school degree or equivalent preferred but not required, • 1-3 years Bench Jeweler (or relevant) experience in skilled trades working with fine metals, • Passing a qualified bench test to assess current jeweler level, • Excellent organizational skills & detail orientation, • Customer service minded individuals with a high standard for quality work, • Basic computer skills, • Varying hours including some nights and weekends, • Full-time consists of a 40-hour work week with seasonal required overtime, • Base pay, $17.00 $30.00. Final pay rate shall be determined and is based on experience and qualifications, • Jeweler Certification classes to develop and enhance your bench skills, • Benefits including medical, dental, vision and prescription insurance (full-time Team Members), • 401(k) with company match, • Competitive Pay, • Paid Time Off (PTO), • Paid holidays (full-time Team Members), • Tuition reimbursement, • Merchandise discounts Signet Jewelers has over 220 Design & Service Centers throughout the United States, located within all Jared Jewelers and select Kay Jewelers and Zales stores. Signet Jewelers is an equal opportunity employer committed to promoting diversity at all levels. Please know that while we appreciate every applicant's interest, we can only contact those selected for further consideration.

A leading wellness product manufacturer based in New York is seeking a Junior Mechanical Engineer.The role involves creating CAD drawings, maintaining drawing control, and assessing facilities.Candidates should have a degree in Mechanical Engineering or related fields and be eager to learn.Additiona

Career Opportunities with Power Device Corporation Current job opportunities are posted here as they become available. For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil‑aero customer base. Requirements Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus. 3-7 minimum years of experience Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus. Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices. Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites. Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection. Sensors, including LVDT, Synchro / Resolvers and Encoders. Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation Clark and Park transform theory High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI. Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS. Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Develop clear requirements and specs from marketing / customer documents. Provide early customer interaction to guide requirements toward more realizable product. Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage. Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups. Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans. Manage support and verification activities (thermal, electrical stress, worst‑case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application. Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program. Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals. Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement. Support legacy product lines and resolve new product issues as they arise. Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs. Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency. Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. #J-18808-Ljbffr

Proficient in CAD and engineering principles to evaluate structural, thermal, and fluidic performance, and communicate findings through slides and documents. Develop mechanical systems from proof‑of‑concept to final manufacturable component using 3D CAD. Skilled in mechanical design using 3D CAD

The ideal candidate will drive manufacturing excellence by optimizing processes, supporting product launches, and leading initiatives in lean manufacturing. A Bachelor's degree in Mechanical or Manufacturing Engineering is required, along with extensive CAD proficiency and solid communication skills

We seek candidates currently pursuing a Bachelor's or Master's degree in Mechanical Engineering with proficiency in CAD/CAM software.

This non-tenure track position encourages academic growth and offers opportunities for further professional development.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Enterprise Mobility is seeking a responsible, dedicated person to join our team as a seasonal Automotive Detailer.The starting rate of pay is $18.This position is located at 395 County Rd 39A Ste 9 Southampton, NY 11968.The start date for the season is on or after May 18th, 2026 and ends on or befor

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

As an FPGA Design Research Engineer, you will have the opportunity to architect and develop state-of-the-art embedded systems for real-time controls and industrial communication applications.You will lead and contribute to R&D projects that are aligned with GE Vernova's energy businesses such as

Job Opportunity At Sayville Ford.Sayville Ford, Long Island's Ford Giant, is in need of detailers.Must be at least 18 y/o with clean driver's license.Neat appearance, must be punctual.Benefits: 401(k), Dental insurance, Employee discount, Flexible schedule, Health insurance, Paid time off, Vision in

As an FPGA Design Research Engineer, you will have the opportunity to architect and develop state-of-the-art embedded systems for real-time controls and industrial communication applications.You will lead and contribute to R&D projects that are aligned with GE Vernova's energy businesses such as

At Competition BMW, we believe our associates are our greatest asset.If you are looking for a career with an extraordinary company, Competition BMW is the perfect career choice.We are currently seeking skilled detailers to join our team!.Cleans and refurbishes new and used automobiles.Washes vehicle