Trabajos Engineering en Smithtown, New YorkCrear alertas

Senior Estimator (Civil Engineering / Sitework - Long Island).

Remote Work: No Overview: At Zebra, we are a community of innovators who come together to create new ways of working. United by curiosity and a culture of caring, we develop smart solutions that anticipate our customer’s and partner’s needs and solve their challenges. Being a part of Zebra Nation means you are seen, heard, valued, and respected. Drawing from our unique perspectives, we collaborate to deliver on our purpose. Here you are a part of a team pushing boundaries today to redefine the work of tomorrow for organizations, their employees, and those they serve. You'll have opportunities to learn and lead in a forward-thinking environment, defining your path to a fulfilling career while channeling your skills toward causes you care about – locally and globally. Come make an impact every day at Zebra. The Advanced Location Technology (ALT) RF Development Team is responsible for the design of next generation RFID and Location products for the Industrial, Healthcare, and Sports Markets. Products incorporate a diverse set of location technologies including: UHF RFID, Ultra-Wideband (UWB), Bluetooth Low Energy (BLE), WWAN and Wi-Fi, to locate assets and people. Members of the hardware team design the RFID readers, Antennas, UWB tags, beacons, receivers, hubs, etc. that are the key hardware components in the overall location solutions. Products developed by this group include Zebras Handheld and Fixed RFID Readers in addition to UWB tags and receivers which are used to track all NFL football players and balls at all NFL games at all stadiums. Design engineers must be creative in applying the latest technologies to solving difficult locationing problems with cost effective, accurate, and reliable hardware and firmware. The Advanced RF Design Engineer will be responsible for developing products from inception to production release. Designs may consist of RF systems and board level designs of radio transmitters and receivers in the 800MHz-8GHz range, RF Front Ends, and RF sub-systems and Antennas. Other responsibilities include support for manufacturing, design and/or specification of antennas, and documentation including specifications, user manuals, and test procedures. The candidate will work with other in-house RF, Antenna, Electrical, Mechanical and Firmware Engineers as well as off-shore Joint-Development-Partners (JDMs) in the design and manufacture of these Advanced Location Technology products. The incumbent will be working onsite at our Holtsville, NY Responsibilities: • Establishes requirements for highly complex RF design projects and may lead a team responsible for establishing requirements. Responsible for RF Receiver and Transmitter design, analysis and product integration., • Architects and designs highly complex RF design projects. Completes all phases of the projects. Follows through on all in-process and final inspection activities, • Responsible for RF system implementation throughout a product design cycle., • Responsible for design of Power Supplies, and other supporting circuits., • Responsible for part selection, prototyping, factory bring up and lab bench debug and root cause analysis., • Work with internal cross-functional teams and external JDM/CMs to successfully bring RFID products to market., • Support EMI/EMC trouble shooting and validation., • Architects, designs, and supports development, and testing of RF design solutions to several highly- complex technical projects., • Creates specifications and provides input for product requirements., • Contributes to technology roadmap process., • Prioritizes quality and seek out improvements in all aspects of the RF projects., • Domestic/international travel to achieve program milestones may be required., • Uses status as a knowledge leader in RF design and functional knowledge across multiple engineering disciplines and program management to provide technical leadership to a given program, • Defines requirements for and may design complex new tools to aid in the analysis and solving of complex problems, • Initiates cross-company collaboration and develops positive relationships with other engineering disciplines, • Exercises judgment (within broadly defined policies and practices) in selecting methods, techniques and evaluation criteria for obtaining results, • May coordinate the activities of other personnel Minimum Requirements: • Bachelors degree and 5+ years experience or Masters degree and 4+ years experience, • Experienced board level RF circuit designer., • Capable of RF Circuit tuning, troubleshooting, • Experience with Antenna design and measurements., • RF design experience in the 800MHz to 8GHz range, • RF Design experience for UHF RFID Readers a big plus, • Experience with RF Power Amplifier design and measurements., • Familiar with RF Receiver design and measurements., • RF System level design experience(RFID, UWB), • Experience with ADS, CST, Cadence design tools Know Your Rights: Conozca sus Derechos: We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Zebra is a federal contractor and is committed to an alcohol and drug free workplace. As a result, all U.S. based employees are subject to the Drug and Alcohol Free Workplace Policy and Procedure. Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive – including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. Salary: USD 120400.00 - USD 180600.00 Yearly Salary offered will vary depending on your location, job-related skills, knowledge, and experience. Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department.

Suffolk Countys Department of Information Technology (DoIT).This resource will work under the management of a Suffolk County IT Manager to contribute to cybersecurity posture improvement policy enforcement and automation and risk-based compliance and remediation.This role will be full time with a du

Company Description MJI Energy Services Group, Inc. is a Building Automation Systems (BAS) company that evolved from Michael James Industries, a trusted HVAC firm with over 30 years of expertise in mechanical systems, climate control, and energy efficiency. As buildings and their management needs advanced, the company transitioned to provide integrated and intelligent BAS solutions. This transformation reflects MJI Energy's commitment to innovation and adapting to industry trends. Based on its solid foundation, the company designs and implements smart solutions to enhance building functionality and energy efficiency. Role Description This is a full-time, on-site role for a Junior Building Automation Systems (BAS) Engineer located in Ronkonkoma, NY. The responsibilities include assisting in the design, programming, testing, and commissioning of building automation systems. You will provide technical support, analyze system performance, and ensure integration of BAS for energy-efficient operations. The position also involves collaborating with other team members to deliver effective automation solutions tailored to client needs. Qualifications • Strong analytical skills, including the ability to interpret and solve complex technical challenges, • Experience with business analysis, business process optimization, and defining business requirements, • Proficient communication skills to collaborate with team members and clients effectively, • Knowledge or experience in building automation systems, energy management, and HVAC technologies is an advantage, • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related technical field, • Willingness to work on-site and engage in hands-on tasks as needed, • Strong organizational and problem-solving skills with attention to detail, • Relevant certifications in BAS or HVAC systems Why Join Us: • Competitive salary with health benefits package, • Hands-on training and career development opportunities, • Work with cutting-edge BAS technology and energy management solutions, • Supportive team environment that encourages learning and innovation, • 401K, • Life insurance, • Profit sharing, • 11 company paid holidays

Senior Verification Engineer to support verification and validation of complex FPGA-based systems for aerospace, defense, and space applications. This role focuses on FPGA verification (VHDL/Verilog), simulation, test strategies, protocols, and certification activities. Position Summary The Senior Verification Engineer will develop verification plans, build testbenches, run simulations, and ensure first-pass success of FPGA designs. You will work closely with design, hardware, and software teams while supporting certification and documentation requirements. Key Responsibilities Develop and execute FPGA verification and validation plans, test strategies, and methodologies. Create simulation environments, testbenches, and run regression testing. Verify designs written in VHDL and support verification using Verilog/SystemVerilog. Debug FPGA issues and collaborate with cross-functional engineering teams. Work with Xilinx Vivado tools and ModelSim/Questa for simulation. Validate high-speed interfaces and protocols including PCIe, 1G/10G Ethernet, and TSN. Support DO-254/178C certification activities and documentation. Mentor junior engineers and contribute to continuous improvement of verification processes. Qualifications Bachelor’s or Master’s in Electrical or Computer Engineering. 8–15 years of FPGA verification experience. Strong expertise in VHDL, with working knowledge of Verilog/SystemVerilog and UVM. Proficiency with Xilinx Vivado; experience with Intel Quartus or Lattice Diamond is a plus. Experience with ModelSim/Questa and Xilinx ILA. Solid understanding of FPGA architecture and digital design. Hands-on experience with PCIe, 1G/10G Ethernet, TSN. Experience supporting DO-254/178C certification processes. Strong debugging, analytical, and communication skills.

GSE Dynamics, Inc., a full-service engineering and manufacturing company located in Hauppauge, NY, is seeking a Manufacturing Engineer in the Engineering Department who is organized, detail oriented and possesses strong interpersonal skills. \n Summary: \n The Manufacturing Engineer will be responsible for evaluating, designing, and implementing efficient production methods and processes. The role focuses on improving operational efficiency, quality control, and overall productivity. The successful candidate will work closely with design, production, and quality teams to ensure the most effective and innovative production strategies are applied. \n Reports to: Director of Manufacturing Planning \n Duties include: \n\n • Analyze and design efficient production processes for manufacturing systems.\n, • Develop and implement process improvements to reduce production time, cost, and waste.\n, • Create and maintain process documentation, including work instructions, procedures, and flowcharts.\n, • Collaborate with the engineering and production teams to ensure proper integration of new methods into existing systems.\n, • Conduct time studies, process optimization, and line balancing to enhance productivity.\n, • Identify potential issues or bottlenecks in production and propose corrective actions.\n, • Develop and support the introduction of new tools, technologies, and equipment to improve production processes.\n, • Ensure compliance with industry standards, safety regulations, and quality requirements.\n, • Assist in the design and layout of production lines, workstations, and facilities.\n, • Conduct root cause analysis for problems related to manufacturing efficiency or quality.\n, • Provide training and support to operators and production staff on new methods or procedures.\n, • Monitor and report on key performance indicators (KPIs) related to production efficiency, cost reduction, and product quality.\n, • Proven experience in a manufacturing or production environment, ideally as a Methods Engineer or in a similar role.\n, • Strong understanding of production processes, lean manufacturing principles, and process improvement techniques (such as Six Sigma, Kaizen, etc.).\n, • Experience with process mapping, time studies, and work measurement.\n, • Proficient in using CAD software, manufacturing simulation tools, and ERP systems.\n, • Excellent problem-solving, analytical, and troubleshooting skills.\n, • Strong communication and teamwork abilities.\n, • Experience in aerospace and defense industry\n, • Certification in Lean Manufacturing, Six Sigma, or other process improvement methodologies.\n, • Process Improvement, Production Systems Design, Manufacturing Technologies\n, • CAD and Simulation Tools, ERP Systems, Problem Solving, Data Analysis, \n, • Project Planning, Budgeting and Cost Management and Cross Functional Collaboration\n

BUSINESS: CIRCOR Aerospace, Inc.DIRECT REPORTING: Quality Manager.About CIRCOR Aerospace & Defense.CIRCOR Aerospace & Defense is focused on the design, development, and manufacture of specialty fluid and motion control products for demanding aerospace and defense applications.CIRCOR products

Provides leadership and oversight to day-to-day Process Engineering support across the company (Engineering, Product Development, Test Engineering, Procurement, Manufacturing, and Product Assurance), focusing on improving processes and resolving production issues. Bachelor’s degree in Electrical E

Bachelors or Masters degree in Computer Science, Artificial Intelligence, Machine Learning, or a related field.AWS Certified Machine Learning Specialty or AWS Certified Solutions Architect certification.Java, Spring Boot, API Web Services integration = Required.Extensive experience with AWS cloud se

Spellman High Voltage Electronics Corporation, a family owned business for over 75 years, takes pride in powering progress in health, security and quality of life. We at Spellman High Voltage Electronics Corporation believe that each individual is entitled to equal employment opportunities without r

Candidate will be expected to assist with the implementation of various Privileged Access Management components, onboarding of accounts into PAM tool, and interfacing with development teams to onboard service accounts.Candidate will also need to work with both internal customers and CyberArk support

Under the general guidance of the IT/Security Architect or Systems Manager, the candidate will be responsible for evaluating and implementing new technologies, analyzing cybersecurity related components and controls associated to the product, process and solution, and identify and resolve potential

Since 1969, Sensitron Semiconductor has been a manufacturer of discrete semiconductors and microelectronics for aerospace, defense, medical, and other high reliability markets, and applications.Our long-term success can be attributed to the talent, creativity, and dedication of our employees.Sensitr

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies.Our products and services are used by the military, aerospace, and industrial markets, helping to advance tec

Senior Sourcing Manager - Supplier Quality Engineering. The Senior Sourcing Manager - Supplier Quality Engineering at GE Aerospace will play a critical role in ensuring the quality, reliability, and performance of components and materials sourced from suppliers.

Plan the delivery of the overall Engineering Product Development programs and associated activities in accordance with the mission and the goals of the organization by establishing and maintaining the program charter(s) and program plans. Deliver programs' status reports in accordance with the progr

Data Device Corporation (DDC) invites you to explore career opportunities with a world leader in high-reliability connectivity, power, and control solutions for the Aerospace, Defense, and Space industries.Our dedication to quality products, on-time delivery, and superior support supports critical m

We are seeking a motivated and detail-oriented Estimator / Engineer to join our team. You will be responsible for preparing detailed quantity takeoffs, developing cost estimates, analyzing drawings and specifications, and coordinating with internal teams, subcontractors, and suppliers to ensure accu

Design/Maintenance of Electrical Systems (480 VAC 3 Phase, 120 VAC Single Phase, 24 VDC). As a system owner/expert for automation, process control, MES, digitalization, and/or electrical/power distribution, you will be a key resource in help creating a strategic vision for the future of the site. Pr

Mechanical Design Engineer (experienced). Lead design and engineering analysis from initial planning through development and testing. BSc or MSc in Electrical Engineering with a focus on power electronics; PhD is a plus.

MJI Energy Services Group, Inc.Building Automation Systems (BAS) company that evolved from Michael James Industries, a trusted HVAC firm with over 30 years of expertise in mechanical systems, climate control, and energy efficiency.As buildings and their management needs advanced, the company transit

Provide engineering expertise to clients for design.

Experience in mechanical CAD design (Autodesk Inventor), ability to perform simple design hand calculations, fixture design, and especially fixture design for testing products. Participate in and conduct initial and ongoing design reviews. Supporting quoting efforts for Design/Fabrication as needed.

Job Description Summary Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies.We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft.We have a relentless dedication to the futur

Job Description Summary Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies.We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft.We have a relentless dedication to the futur

Electronics Package Design Engineer Primary Skills - package layout, signal integrity, flip chip, bga, ceramic, multi-chip modules, electronics packaging, system in package, cadence Job Description Electronics Packaging Design Engineer We are seeking an experienced Electronics Packaging Design

Job Title: IAM Security Architect with Application Onboarding Consultant Location: 102 Motor Parkway, Hauppauge, NY 11714-Hybrid Mode of Hire: Contract &l

Mechanical Engineer - Immediate Start! Location: Hauppauge, NY | Contract Role | Every Other Friday Off! Are you a hands-on Mechanical Engineer with a passion for precision and innovation? Ready to dive into a high-impact project that blends cutting-edge design with real-world manufacturing? We'r

Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Works on multiple

Escalate issues and requests to higher levels (engineering teams, application development, third-party vendors, etc. Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops Microsoft Office versions through Office 365 Wireless devices and networks Microsoft Windows

Job Title: Cloud Security Engineer Azure Location: 102 Motor Parkway, Hauppauge, NY 11714-Onsite Mode of Hire: Full time <p style="margin-bottom:16p

We are seeking an experienced Electronics Packaging Design Engineer to join our team. You’ll collaborate with cross-functional teams and suppliers to deliver reliable, manufacturable, and cost-effective designs. Responsibilities: Design interconnects, substrate stack-ups, routing strategies, and p

The Senior Verification Engineer will develop verification plans, build testbenches, run simulations, and ensure first-pass success of FPGA designs.

Job Description Full-time career opportunity for a Senior Engineer to design and implement high-performance digital systems using VHDL. This role involves FPGA-based design, validation, troubleshooting, and collaboration with cross-functional teams. Key Responsibilities: • Lead design, development, and optimization of digital circuits/systems using VHDL., • Verify and validate designs through simulations and testing., • Collaborate with architects, hardware, and software teams to define requirements and solutions., • Debug and optimize FPGA hardware/software interactions., • Document design processes and results., • Plan and manage development schedules and resources., • Mentor junior engineers and promote best practices., • Bachelor's or Master's in Electrical/Computer Engineering., • 8–15 years of digital design experience with FPGA projects., • Proficiency in VHDL and FPGA design tools (Xilinx, Altera)., • Experience with PCIe, Ethernet (1G/10G), TSN, and system-level design/verification., • Strong knowledge of FPGA architectures, high-speed design, and DO-254 certification processes., • Excellent problem-solving, communication, and teamwork skills. Well-established, stable company. Long-term projects featuring great technology. They are a great group of people to work with.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job DescriptionSalary: $120-$150K Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineerwith a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards., • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control., • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products. Qualifications: • Bachelors degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Regularly work with power output up to 450 kV and up to 6kW, • Work on multiple projects varying in complexity from inception to completion, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise or finalize BOMs, • Create and maintain engineering reports, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service, • Participation in the creation of technical documentation, system manuals and customer facing documentation, • Bachelor’s Degree in Electrical Engineering, • Minimum of 3 years of experience in a manufacturing environment, • Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Knowledge of analog circuit design, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Ability to solve complex technical problems with minimal supervision, • Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters, • Proficient soldering skills, • Proficiency in the English language with established written and verbal communication skills, • Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics, • Proficiency in Outlook, Microsoft Word, Excel and PowerPoint, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be legally authorized to work in the US, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • Basic understanding of an ERP system, • Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment, • Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions, • Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job function in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • analyze and solve non-routine and complex problems, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals. This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description Introduction Are you a technology-focused, problem solver individual looking to jump-start your career? If so, we’ve got an exciting opportunity for you. We are IVIONICS, a growing technology organization in search of a talented Level II Systems Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? • Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector., • A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office., • Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively., • Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills., • Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including: medical/dental/vision, retirement plans, paid-time off, and more.Responsibilities:, • Deliver expert service focused on the timely resolution of issues while exceeding client expectations for quality and professionalism., • Receive incoming technical issues and requests that will include software, hardware and operating system problems for all company and customer-supported technologies. This will include desktops, laptops, wireless devices, peripherals, and commercial as well as proprietary software within the organization., • Perform general break/fix and preventative maintenance functions as necessary: provide hands-on and/or remote support to desktops, laptops, wireless devices, and peripherals. You may also be required to perform basic hardware/software troubleshooting on servers and other network components., • Perform all build, configuration, and install services for desktops, laptops, wireless devices, peripherals etc., • Escalate issues and requests to higher level (Engineering Teams, Application Development, 3rd-party Vendors, etc.) whenever necessary in accordance with pre-defined SLA’s., • Open, track, escalate and resolve each assigned ticket in our in-house problem ticketing system.Requirements:, • Bachelor’s degree in an IT-related discipline or equivalent work experience., • 2-4 years full-time experience in a technical support role., • Technical certification in a relevant technology discipline. (preferred), • Must have reliable transportation, a valid NYS driver’s license and be willing to travel throughout the New York Tristate area., • Able to work in a fast-paced, high-pressure environment., • Excellent oral and written communications skills., • Excellent Customer Service skills., • Able to interact effectively with all levels of internal and customer contacts., • Able to work flexible shifts (7am-6pm, M-F, 8:30-5:30 Tues-Sat, 8:30-5:30 Sun-Thurs) and be available for 24x7 off-hours coverage rotation (nights & weekends)., • Security related technologies (multifactor authentication, application control, encryption solutions, etc.), • Microsoft Windows version through Windows 10 Operating Systems for desktops & laptops, • Microsoft Office versions through Office 365, • O365 Migrations and Management, • Wireless devices and networks., • Microsoft Windows Server, Active Directory, and associated services (DNS, WINS, DHCP, etc.)., • Microsoft Exchange Server and Cloud mail services., • MS Intune Experience, • VMware, • Implementation of Firewalls, • Implementation of Switches, • Meraki Wireless, • Networking architecture and equipment (routers, firewalls, switches, cabling, VoIP, etc.), • Backup-related technologies (hardware/software and cloud solutions), • Hard Drive Imaging Powered by JazzHR g4gyvMYAG7

Job Description AI Solutions Engineer Are you a technology-focused, problem-solving individual looking to jump-start your career? We are IVIONICS, a growing technology organization in search of a talented AI Solutions Engineer to join our team. If you’re ready to advance your career and be a part of our future success story, keep reading. Why Choose Us? * Career Advancement. We’re not just offering a job; we’re offering a career. Join us, and you’ll have opportunities to advance yourself in the constantly growing technology sector. * A Flourishing Work Environment. At IVIONICS, we believe in fostering a positive workplace culture. We value collaboration, professional growth, and relationship-building both in/out of the office. * Work-Life Balance. We understand that your personal life is important. We offer flexible scheduling options to ensure you can manage your professional and personal life effectively. * Professional Development. If you’re willing to invest, then so are we. At IVIONICS, you’ll have access to ongoing training and development resources to continue enhancing your skills. * Competitive Compensation. We recognize your hard work and want to reward you for it. In addition to a competitive salary, all employees are eligible for a comprehensive suite of additional benefits including medical/dental/vision, retirement plans, paid time off, and more. Responsibilities: * Design, develop, or implement AI/ML models aimed at enhancing automation in legal workflows - think smart document categorization, contract parsing, and intelligent query systems. * Prepare, clean, and engineer features from structured and unstructured legal and technology operations data. * Collaborate with senior engineers and legal tech consultants to deploy models into production, maintaining alignment with security and compliance standards. * Contribute to research projects, prototypes, and the adoption of new AI architectures and tools. * Monitor model performance, refine for accuracy and stability, and ensure models meet operational demands. * Create clear documentation: model behavior, limitations, processes, and maintenance procedures. * Stay informed about AI/ML developments, best practices in MLOps, and relevant legal-tech innovations. Requirements: * 3–4 years of experience in AI, ML, or data engineering, preferably in a startup or SMB environment. * Strong Python skills with familiarity in AI/ML libraries like TensorFlow, PyTorch, or Scikit-Learn. * Understanding of data structures, statistical modeling, and foundational ML algorithms. * Comfortable working with both structured and legal/unstructured text data. * Commitment to high standards of data governance, documentation, and security. * Experience with data manipulation and analysis tools. * Experience with version control systems (Git/GitHub). * Ability to work with structured and unstructured datasets. * Familiarity with cloud platforms (AWS, Azure, or GCP). * Eagerness to learn and stay current with AI/ML trends and technologies. * Basic knowledge of deep learning concepts (neural networks, CNNs, RNNs) * Experience with natural language processing (NLP) for text analysis and document classification (preferred). * Awareness of data governance, privacy, and compliance standards relevant to legal technology (preferred). IVIONICS is committed to being an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law. Powered by JazzHR IhH4ohWLzy

Job Description LHH Recruitment Solutions has an opening for an Account and Sales Manager for our client in the Bohemia, NY area. This direct hire role allows you to expand your account management career within a state-of-the-art technology organization. This on-site position requires a minimum of five-years current experience, a bachelor’s degree in electrical or electro-mechanical engineering as well as experience in conducting technical presentations, trade shows and experience in a OEM environment. Successful candidates will have several years within the aerospace/aeronautics/defense/security fields. Salary range: $75,000.00 - $100,000 plus commission structure RESPONSIBILITIES: • Identify and pursue new business opportunities by conducting market research., • Analyzing market surveys and attend related tradeshows, exhibitions, and conferences., • Generate sales leads, set client appointment, prepare, deliver, and explain quotes, traveling to customer negotiations and closing orders, and assisting with product shipment as needed., • Maintain relationship with OEM customers by making visits and phone calls., • Schedule and conduct technical presentations for current and new customers., • Develop and execute sales plans to achieve objectives – KPIs, revenue, profitability, and market share., • Achieve annual booking plan on a quarterly basis., • Observe and maintain a real time sales forecast, sales database and reporting results., • Collaborate with cross-disciplinary engineering team and operations department., • Able and willing to travel to customer sites or other company locations worldwide (approximately 20%) REQUIREMENTS: • REQUIRED - Bachelor’s Degree in electrical or electro-mechanical discipline., • Experience in a OEM environment., • Willingness to learn and be hands on in a technical environment., • Proven well established verbal and written communication skills., • Highly proficient in Microsoft Office Suite of Tools., • Strong analytical, problem-solving skills and time management., • Ability to operate independently with minimal guidance by management., • Demonstrated proven history of successful sales management and quota achievement., • Willingness and ability to travel domestically and internationally., • Ability to read schematics highly preferred., • Superior proven technical presentation skills. Health insurance, dental insurance and life insurance are offered with this full-time direct hire role. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Pay Details: $115,000.00 to $120,000.00 per year Search managed by: Laura Orozco Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or engineering company, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Must be authorized to work in the U.S., • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Basic understanding of an MRP or ERP systemPhysical & Mental Demands:, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required, • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting the research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Bachelor’s Degree or higher in Mechanical Engineering, • Familiarity with manufacturing processes and mechanical components, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Demonstrated working knowledge of SolidWorks or similar software, • Proficient in Microsoft Office Suite, • Experience in electro-mechanical design, • Minimum 2 years of mechanical design experience, • Experience working with ERP systems, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals, • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not

Job Description Jr Electrical Engineer Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Collaborate with Design Engineers to address issues related to test equipment hardware, software, reliability, and qualification across multiple shifts and facilities., • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Resolve test-related issues in conjunction with factory production personnel., • Test PCB layouts., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Basic understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usageCompany DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description Jr Test Engineer Job Description • Building part test setups, qualification testing, making of production test jigs, developing test routines, test software and test automation, • Collaborate with Design Engineers to address issues related to test equipment hardware, software, reliability, and qualification across multiple shifts and facilities., • Provide maintenance and repair support for test station hardware, software, and interface test adapters, including both custom-designed and COTS systems., • Resolve test-related issues in conjunction with factory production personnel., • Test PCB layouts., • Prepare documentation for PCB assembly and test travelers., • Support test box development and initial production runs., • Utilize C# code for test development., • Perform ATE test integration and development., • Assist Design Engineers, when necessary, in troubleshooting and repairing products returned by customers. Requirements • Bachelor of Science in Electrical Engineering (BSEE), an electrical engineering degree, or equivalent military training and experience., • Candidates should possess a background in power electronics., • Basic understanding of analog circuit design, circuit analysis, digital circuit design, and analog signal conditioning., • Desirable exposure to software such as C#, embedded code development, and debugger usageCompany DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description CONSTRUCTION INSPECTOR STRUCTURAL ENGINEERING BACKGROUND My name is Bill Stevens, and I have a new full time Construction Inspector opportunity available for a major engineering firm located in Islip, Long Island that could be of interest to you, please review my specification below. The work schedule will be onsite in the firms offices in Islip. This position will be paying a competitive fulltime salary in the range of $140,000 - $150,000 plus an outstanding benefits package, P.E (Professional Engineer) education assistance and bonus structure. Responsibilities: Serve as the engineering firm’s representative on-site, providing daily oversight of contractors’ work to ensure compliance with approved plans, specifications, codes, and regulations. Monitor and document construction activities, including materials testing, quality control, safety compliance, and project progress. Review and interpret contract documents, shop drawings, RFIs, and submittals. Prepare detailed daily inspection reports, maintain accurate project records, and track progress against schedules. Conduct field inspections of structural and civil components, including foundations, concrete, steel, utilities, roadways, and site improvements. Coordinate with contractors, design engineers, utility companies, and municipal agencies to resolve technical and field-related issues. Review change orders, progress payments, and assist with project closeout documentation. Ensure construction adheres to all federal, state, and local codes as well as client requirements. Current Projects that the firm possesses: Current projects include an Electric Power Generating Station in Brooklyn, NY where the firm is overseeing the rehabilitation of a large pier including the encasement of piles below the waterline as well as overseeing geotechnical investigations of potential future development site. Other current project sites include a Generating Station (façade and structural remediation efforts) and power plant (pier and pile cap restoration projects). Experience: Bachelor’s degree in Civil Engineering or Structural Engineering required. Professional Engineer (PE) license in NY is preferred but it is NOT required, in fact the firm will take steps to sponsor for the ideal candidates (PE) as well. More than five years of experience in construction inspection, resident engineering, or construction management. Knowledge of NYSDOT, NYCDDC, or other local agency standards would be a plus only and is NOT required. Strong understanding of structural systems, site/civil construction, materials testing, and safety standards. Excellent written and verbal communication skills for report writing and stakeholder coordination. Ability to work in the field in varying conditions and occasionally travel to project sites throughout New York City (5 boroughs), Nassau, and Suffolk Counties. The interview process will include an initial phone or Zoom screening. Please let me know your interest for this position, availability to interview and start for this position along with a copy of your recent resume or please feel free to call me at any time with any questions.

Job Description Narda MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: The RF/microwave Amplifier Design Engineer is an experienced professional with the capability to design discrete transistor and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies. Able to synthesize and develop new amplifier components using CAE analysis tools and has hands-on bench troubleshooting and test skills. The individual effectively communicates with contacts inside and outside of own department, customers, and suppliers. Recommends enhancements to systems and processes. Possesses practical project management skills and will work under general supervision to achieve technical performance while meeting schedule and cost operational targets for specific programs and projects with moderate impact on departmental results. Essential Functions: • Design, develop, test and support production of discrete and MMIC based low noise and medium power amplifiers implemented in both hybrid and surface mount technologies., • Conceptualize and develop new RF and microwave circuits, packages, and products., • Perform linear and nonlinear circuit simulations of microwave active and passive circuits., • Provide direction on hi-reliability specifications, i.e., the screening and testing for our products to be compliant., • Develop specifications for microwave components and subassemblies., • Generate design review presentations and test reports., • Design for ease of manufacturing., • Estimate and track project schedules and labor for engineering developments., • Bachelor’s Degree in Electrical Engineering and a minimum of 4 years prior relevant experience or a Graduate Degree and a minimum of 2 years prior related experience., • A minimum of 2 years designing and simulating low noise amplifiers., • Experience designing RF/Microwave passive components, e.g., couplers, power dividers and attenuators., • Ability to manage projects and interface to other areas., • Experience designing products for manufacturing., • Proficient in linear CAE and experience with non-linear CAE., • Ability to work under a microscope in a clean room environment to test and tune circuits., • Experienced user of microwave test equipment; including network analyzers, noise figure analyzers, spectrum analyzers, power meters and signal generators., • Familiarity with device semiconductors, such as GaAs and GaN., • Ability to gain Secret Level Security Clearance., • Familiarity with MIL specifications, such as MIL-PRF-38534 and MIL-STD-202., • Hands-on experience testing and aligning fine pitch circuits under a microscope., • Design experience with oscillators, synthesizers, and PIN diode circuits., • Knowledge/application of filter synthesis and design., • System analysis experience comprising both cascade and spur analysis., • Proficient use of Keysight ADS, Keysight RFPro, and/or Ansys HFSS simulation tools., • Perform EM simulations of microwave housings, boards, transitions, and passive circuits., • Use of CAD tools such as AutoDesk Inventor and AutoCAD., • Design/test experience of circuits operating through 26GHz is favored, with operation up through 40GHz further preferred., • Experience with both chip and wire hybrid and PCB surface mount manufacturing methods., • 401k, • Health/Dental/Vision insurance, • Life Insurance, • Paid time off, • Tuition Reimbursement Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that values diversity, equity, and inclusion, and ensuring all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination, and we ensure that all qualified applicants receive equal consideration for employment regardless of race, color, religion, age, sexual orientation, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, national origin, marital status, veteran status, citizenship status, disability, or any other characteristic protected by federal, state, or local laws. We are committed to compliance with Executive Orders, including ensuring affirmative action for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.