Calibration jobs in Smithtown, New YorkCreate job alerts

QA Inspector II | DPI (Dry Powder Inhaler) Onsite in Hauppauge, New York Full-Time First Shift: 8:30 AM – 5:00 PM (may vary based on business needs) Responsibilities: The QA Inspector is responsible for monitoring and ensuring product quality is maintained through all phases of manufacturing or packaging in compliance with established specifications. • Verification of raw materials during the dispensing process., • Dispensing printed packaging materials to packaging., • Perform in-process checks during batch manufacturing and packaging, as per manufacturing & batch packaging record instructions., • Collection of in-process blend, finished product, validation samples for analysis, sample collection as per protocols. Specifically, to perform blend uniformity (BU) sampling., • To clean and maintain the samplings rods/dies/sample boxes used for BU sampling., • Perform IPQA testing on the manufacturing floor specifically LOD, Bulk Density, Tapped Density, Leak Test, Weight Variation test., • Ensure cleaning of manufacturing and packaging equipment, area and provide line clearance., • To perform posting of dispensed materials and samples into SAP system (ERP system) and to perform other transactions in SAP., • Involve in investigation of Deviation, OOS, OOT, or any other non-conformances., • Ensure completion of individual training assigned and follow company policies, safety requirements, cGMP and SOP’s., • Review of online batch records, area/equipment logbooks, calibration/PMP records etc., • Ensure the proper isolation of rejected material generated during batch process and accountability in the batch record., • Review of engineering records (temperature and humidity data, calibration reports and PMP records)., • To take daily Quality rounds at shop floor to ensure shop floor is maintained in state of compliance and per GMP requirement., • Report, escalate to Manager quality assurance about daily shop floor activities and any discrepancy during batch manufacturing and packing., • Other duties [additional support] that management may assign from time to time. Education Qualifications/Experience Required: • Minimum Science Graduate., • A minimum of 1-2 years of recent pharmaceutical experience (DPI, MDI or Injectables), • Shop floor inspector experience, • Raw material & testing experience required Preferred Qualifications: • Experience in generic pharmaceutical manufacturing. Skills/ Competencies • Knowledge of Good Manufacturing Practices and 21 CFR Part 820., • Ability to read, write and communicate effectively., • Basic computer skills (Microsoft Word, Power and Excel)., • Self-motivated, with the ability to work in fast-paced manufacturing environment and handle multiple tasks simultaneously., • Excellent organization skills with strong attention to details skills., • Strong fundamental mathematical skills and knowledge. Physical Requirements • Work standing or walking unassisted for 75% or greater of an 8-hour period., • Unassisted lifting up-to 35 lbs., may be required., • Able to wear appropriate personal protective equipment at all times, when required. Other Information This role works in a cGMP laboratory or manufacturing environment, where personal protective equipment is required, which may include uniforms, lab coats, safety glasses, respiratory protective equipment, hearing protection, etc. Work with or around solvents, powders, or other materials commonly found in a pharmaceutical laboratory or manufacturing facility is required. Remote work and relocation are note supported in this position. In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance – medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) – vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, employee discounts, and other benefits.

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! The Calibration Technician - Level 2 is responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Responsibilities: \n • Perform customer support activities either in-house or on-site involving the calibration and certification of Electronic Test and Measurement equipment utilizing a variety of automated calibration systems\n, • Interact directly with customers \n, • Follow established policies and procedures in conducting on-site or in-house repair and calibration of equipment to ensure it meet high standards of performance\n, • Diagnose equipment malfunctions \n, • Represent the company in a customer support role and is responsible for customer's satisfaction with equipment and servicing\n, • Perform other duties as assigned\n\n Requirements \n • Military training or experience (PMEL OR TMDE OR Electronics) ' OR an Associates Degree in Electronics (or related technical field); OR equivalent work experience & training.\n, • Minimum of 5 years of calibration experience.\n, • Experienced in calibrating several disciplines of test and measurement equipment such as:\n\n, • Electronic, • RF Microwave, • Temperature \n • Strong communication skills including written, verbal and listening skills.\n, • Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc.\n, • Experience in interacting with customers in a courteous and professional manner and providing an excellent customer experience.\n\n And we would prefer: \n • Knowledge of ANSI / NCSL Z-540-1, ISO 9000, and ISO/IEC 17025\n, • Experience using Calibration Lab Software such as LabView, SureCal, Met/Cal, etc.\n\n Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment. In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: \n • Dental\n, • Vision\n, • Employee Assistance Program\n, • Basic Life/AD&D Insurance\n, • Long Term Disability Insurance\n, • Short-Term Disability Insurance\n\n We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. #INDTUS Salary Description $25 - $37/hr

The Quality Control (QC) Inspector perform in-process, final inspection and test of completed components and subassemblies and to fabricate test fixtures and prototypes as necessary. Component level electronics experience required. ESSENTIAL DUTIES AND RESPONSIBILITES: • Perform receiving, in-process and final inspection on parts, sub-assemblies, and assemblies, and complete required documentation., • Perform incoming inspection on material and components., • Read and interpret electronic schematics, diagrams, and bills of material., • Perform visual, mechanical and electrical inspections on products., • Knowledge of component level electronics, • Experience using Oscilloscopes, Multimeters, Power Supplies, Test Fixtures and Signal Generators., • Inspect for manufacturing or non-manufacturing defects with regard to material returned from the field., • Trouble shoot nonconforming products to component level., • Complete check lists, tags and data sheets as necessary to accurately maintain records of tests performed., • Maintain inspection history card and non-conformance report files., • The ability to solder to acceptable workmanship standards., • The ability to wire and generate prototype hardware., • Perform periodic calibration of test equipment and maintain detailed records of calibration. EXPERIENCE/REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skillset, and/or ability required. • One year certificate from college or technical school; or a minimum of five years related experience and/or training, in a manufacturing environment. #CareForTomorrow At AMETEK STC we believe in building a sustainable future for our customers, colleagues, suppliers, and the communities in which we operate. We take an active role in promoting real change, by contributing to a healthy, fair, and sustainable society in many of the countries our facilities are located. We call it #CareForTomorrow! https://www.ametekstc.com/about-us/carefortomorrow Compensation Employee Type: Hourly Currency: USD Salary Minimum: 45,000 Salary Maximum: 60,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

Job DescriptionDescription: Position Summary: The Chemist II is responsible for and has a moderate level of experience in performing chemical analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, and documenting results in accordance with SOPs. Responsibilities: Responsibilities include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Perform laboratory chemical analysis on raw materials, in-process materials, and/or finished product, using ICP-OES/MS, UV-Vis, Fluorescence, GC, HPLC/UPLC, titration, and other wet chemistry techniques, as assigned, in accordance with the prescribed approved analytical test method., • Execute assay testing, content uniformity testing, impurities analysis, method transfers, cleaning validation testing, and process/interpret data at a moderate level with minimal to no errors., • Maintain a clean and organized laboratory working environment., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Assist in laboratory investigations, as assigned., • Assist in Process validation testing and protocol/report review, as assigned., • Maintain and troubleshoot laboratory equipment at a moderate level., • Suggest improvements to existing testing methods when possible., • Assist with routine Metrology functions, including instrument cleaning/ preventive maintenance/ calibration/ verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Bachelor’s degree in a science related field., • Between 4 - 8 years of work experience in a laboratory setting preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Proficient in HPLC/UPLC, ICP, Dissolution, IR, UV/VIS, and wet chemistry testing., • Proficient with analytical laboratory software., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail., • Able to effectively present results., • Able to perform testing on moderate level methods and troubleshoot moderate method issues. May require some guidance/supervision as needed., • Able to troubleshoot moderate instrument issues independently, and complex instrument issues under supervision. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs. Pay Range: • $75,000 - $89,999 per year

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Accounting department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays, • Paid vacation Responsibilities: Responsibilities include but are not limited to checking the overall quality of the manufacturing and/or packaging operations. Perform all line releases, product quality checks and batch record/work order review. • Supports production activities related to the timely production of finished goods., • Performs line releases and product quality checks including batch record/work order review for QA release., • Assists in the validation/qualification of batches, including sampling., • Ensure that any required sampling is performed and samples are submitted to laboratory., • Maintain records and organize documents to support packaging/manufacturing operations in an efficient manner., • Assist when needed for any pertinent investigations involving respective areas., • Monitor warehousing and staging areas to ensure materials are being received/shipped/maintained within cGMP and SOP Guidelines., • Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor., • Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs., • All other duties as assigned Education and Experience: • HS Diploma, • At least one year of directly related experience. Work Environment: • In person. There is no remote option for this role., • Overtime may be required from time to time. The salary listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as permitted by law. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Accounting department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays, • Paid vacation Responsibilities: Responsibilities include but are not limited to checking the overall quality of the manufacturing and/or packaging operations. Perform all line releases, product quality checks and batch record/work order review. • Supports production activities related to the timely production of finished goods., • Performs line releases and product quality checks including batch record/work order review for QA release., • Assists in the validation/qualification of batches, including sampling., • Ensure that any required sampling is performed and samples are submitted to laboratory., • Maintain records and organize documents to support packaging/manufacturing operations in an efficient manner., • Assist when needed for any pertinent investigations involving respective areas., • Monitor warehousing and staging areas to ensure materials are being received/shipped/maintained within cGMP and SOP Guidelines., • Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor., • Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs., • All other duties as assigned Education and Experience: • HS Diploma, • At least one year of directly related experience. Work Environment: • In person. There is no remote option for this role., • Overtime may be required from time to time. The salary listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining a team member's base salary and/or rate, several factors may be considered as permitted by law. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job DescriptionDescription: Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! Driver - Pick up & Delivery • Load and unload your vehicle through out your delivery route., • You will need to identify equipment and verify that it matches transport documentation., • Identify vehicle maintenance needs. Shipping & Receiving • Appropriately package and ship equipment to our customers and vendors. You will verify that accessories and options are documented according to shipping policies., • Pull and label equipment for shipments to ensure equipment and shippers show an exact match., • Receive, unpackage, and account for the contents of all inbound orders., • Research and implement shipping options for unusual packaging situations or customer requirements., • Receive and handle vendor deliveries, completing paperwork as needed., • Initiate and manage shipping claims through to resolution, including maintaining contact with delivery service and the affected customer as required.\, • Use UPS, Fed-Ex and WorldShip to generate shipping labels., • Maintain relationships with UPS, FedEx, and any other relevant parcel sales contacts., • Perform additional administrative or logistics business functions as required.Requirements:, • A high school diploma, GED, or equivalent, • The ability to lift up to 50lbs, • Clean Driver license/record, • Strong communication skills, • Excellent customer service skills, • Good attention to detail; thorough, • Proficient computer skills including strong data entry skills, • Must demonstrate good attention to detail, • Previous experience in dealing with customers., • Previous work experience in a shipping and receiving role, • Experience using shipping software such as: UPS WorldShip or Fed-Ex BENEFITS: We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment. In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: · Dental · Vision · Employee Assistance Program · Basic Life/AD&D Insurance · Long Term Disability Insurance · Short-Term Disability Insurance. Does this sound like you? If so, APPLY NOW! We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability or veteran status.

Job DescriptionDescription: Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! The Calibration Technician - Level 2 is responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Responsibilities: • Perform customer support activities either in-house or on-site involving the calibration and certification of Electronic Test and Measurement equipment utilizing a variety of automated calibration systems, • Interact directly with customers, • Follow established policies and procedures in conducting on-site or in-house repair and calibration of equipment to ensure it meet high standards of performance, • Diagnose equipment malfunctions, • Represent the company in a customer support role and is responsible for customer's satisfaction with equipment and servicing, • Perform other duties as assignedRequirements:, • Military training or experience (PMEL OR TMDE OR Electronics) ' OR an Associates Degree in Electronics (or related technical field); OR equivalent work experience & training., • Minimum of 5 years of calibration experience., • Experienced in calibrating several disciplines of test and measurement equipment such as:, • Electronic, • RF Microwave, • Temperature, • Strong communication skills including written, verbal and listening skills., • Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc., • Experience in interacting with customers in a courteous and professional manner and providing an excellent customer experience. And we would prefer: • Knowledge of ANSI / NCSL Z-540-1, ISO 9000, and ISO/IEC 17025, • Experience using Calibration Lab Software such as LabView, SureCal, Met/Cal, etc. Benefits We believe people are the most important part of every business, which is why we offer more than just great health insurance plans at a great rate. At Trescal, we have a strong track record of retaining our employees by providing challenging work experiences, learning and development opportunities, and a success oriented collaborative environment. In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: • Dental, • Vision, • Employee Assistance Program, • Basic Life/AD&D Insurance, • Long Term Disability Insurance, • Short-Term Disability Insurance We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. #INDTUS

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Experience in propulsion, space, or high-reliability systems Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Who Are We? FDH Aero is a trusted global supply chain partner for aerospace and defense companies, providing end-to-end supply chain solutions for OEM and aftermarket customers. With more than 55+ years of experience and operations in 14 countries, we bring expertise across Commercial, Defense, Space, Business Aviation and Cargo through our specialized business divisions, Electronics, Hardware, Commercial Aftermarket, and Defense Aftermarket. For more information, please visit the FDH Aero website. Why Work Here? Fast-paced & Impactful Work – Every decision helps keep aircraft flying and missions moving Driven Team & Culture – Supportive, driven colleagues who support you every step of the way High-Growth Opportunities – We invest in your success with training and development Competitive Benefits Package – Includes medical, dental, vision insurance, Flexible Spending Accounts (FSA) 401k matching, wellness activities and more At FDH Aero, we understand that the strength of our brand comes from our people, and our culture empowers every team member to contribute and grow. As a global team, our culture is rooted in five (5) core values that begin with the words “We are” and include: service-first, respectful, amplifiers, open-minded and accountable. We Are Looking For The Quality Inspector is an entry-level role responsible for performing basic quality inspection tasks under close supervision. This position focuses on ensuring the quality of electronic components and assemblies in compliance with aerospace standards, with an emphasis on learning and applying foundational quality control processes. What You’ll Do As a Quality Inspector, you’ll be responsible for: • Perform basic visual and dimensional inspections of electronic parts and assemblies using tools like calipers, micrometers, and magnifying devices, • Confirm adherence to basic technical specifications, drawings, work instructions, • Identify and report clear non-conformities with guidance from supervisors or more senior inspectors, • Record inspection findings accurately in designated systems or forms, • Assist with incoming inspections, verifying parts and associated documentation, • Support basic calibration checks of inspection equipment as instructed, • Keep inspection areas clean and organized, following 5S workplace standards, • Follow safety protocols by wearing required personal protective equipment (PPE) and participating in safety training to prevent workplace hazards What You Bring • High school diploma or equivalent preferred, • 0–2 years of experience in quality inspection or a similar role within electronics industry, • Adhere to quality control principles and aerospace standards (e.g., AS9100, AS9102, IPC-A-620, JSTD-001), • Works effectively under supervision, seeking guidance and contributing to team efforts, • Demonstrates precision in identifying defects and ensuring accurate measurements, • Quickly grasps new processes, tools, and aerospace quality standards through training, • Follows established protocols and instructions with consistency, • Identifies and reports issues with clear communication, under direction, • Willingness to adhere to safety protocols and standard operating procedures under supervision Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR Requirement, • 120.15. Some positions will require current U.S. Citizenship due to contract requirements. This position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants will be asked to provide specific documentation to verify U.S. person status under the ITAR and the EAR. A “U.S. person” according to their definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee, or asylee. See 22 CFR Job Type: Full Time FDH Aero is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionDescription: Are you passionate about science and precision? Join our Quality Control team as a Laboratory Technician and gain hands-on experience performing chemical and microbial testing for raw materials and finished products in a regulated, GMP-compliant environment. This is an opportunity to develop your technical expertise, learn from experienced professionals, and contribute directly to ensuring the quality and safety of products that reach consumers. Position Summary: The Laboratory Technician is responsible for performing basic chemical and/or microbial analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, documenting results, and maintaining laboratory supplies, chemicals, and logbooks in accordance with SOPs. • Job Type: Full-Time, • Location: Hauppauge, NY, • Works Hours: Monday – Friday, 7:30AM – 3:30PM EST, • Pay Range: $23 per hour, • Start Date: ASAP Responsibilities: include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Log in and track all samples received in the lab for testing and release., • Perform laboratory physical chemistry testing (ie. weighing, particle size analysis, LOD, Halogen Moisture Analysis, Moisture Content/KF, Water Activity, etc.), identification testing (ie. FTIR, UV-VIS, TLC) and wet chemistry testing (ie. ICP-OES/MS, DT, titrations, pH, dissolution media/stock sample preparation, laboratory solution preparation and standardization, etc.), as assigned, in accordance with the prescribed approved analytical test method., • Perform sampling, plating, and testing of product assigned for microbiology analysis along with media preparation, sterilization and storage, etc., as assigned in accordance with the prescribed approved test method., • Maintain proper labeling of chemical reagents., • Maintain a clean and organized laboratory working environment., • Assist in laboratory investigations, as assigned., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Perform routine Metrology functions, including instrument cleaning/preventive maintenance/ calibration/verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Responsible for compliance with all rules and regulations pertaining to safety policies with the proper attitude toward safety and health, helping to ensure that all department operations are performed with the utmost regard for the safety and health for all personnel., • Other responsibilities as assigned by Management.Requirements: Education and Experience: • Associate’s degree or relevant work experience required; Bachelor’s degree preferred. Skills, Knowledge, and Abilities: • Knowledge of laboratory chemistry or microbiology, and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail. Physical Demands: • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Required to stoop, kneel, crouch, stand, bend, sit, talk, hear, climb stairs. Work Environment: • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions; regular, ongoing travel throughout geographic areas on a continual basis as normal scope of role requiring use of personal vehicle., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. Supervisory Responsibilities: • None Personal Protective Equipment or Attire Required for Position: • Gowning as required by GMPs and/or SOPs

Job Description An established component manufacturer is seeking a driven, career-focused Quality Operations Leader to manage, oversee, and continuously improve product and process quality across our manufacturing operations. This role is critical to ensuring customer satisfaction, regulatory compliance, and operational excellence. Key Responsibilities • Maintain and continuously improve the Quality Management System to ensure ongoing customer and regulatory compliance, • Oversee First Article Inspection (FAI) activities in accordance with customer requirements, • Serve as the primary quality interface for customers, auditors, and regulatory bodies, • Lead, develop, and cross-train Quality and Inspection Department personnel, • Coordinate internal audits, corrective actions, and continuous improvement initiatives, • Implement and maintain statistical methods and structured problem-solving techniques, • Establish and maintain inspection methods, measurement systems, and special process controls Qualifications Most Valued for This Role • 4+ years of experience in quality or inspection roles within a manufacturing environment, • Working knowledge of ISO 9001, AS9100, AS9102, and customer-specific quality requirements, • Experience with product measurement techniques and calibration systems, • Ability to read and interpret engineering drawings and blueprints, • Background in metal fabrication, special processes, and inspection methodologies, • Strong communication skills with the ability to build effective customer relationships, • Collaborative leadership style with the ability to work effectively with company department or function leadership, • Detail oriented and hands-on self-starter with the ability to manage multiple coincident urgent priorities, • Proficiency with Microsoft Office and general computer applications, • Strong analytical and problem-solving skills

Job Description Job Type: Full Time Pay: $25.00 - $30.00 Job Description:This position will be responsible for installation, maintenance, inspection, repairs, and ensuring the efficient operation of service station facilities. Service Technicians evaluate, troubleshoot, and monitor all instrumentation systems, probe cleaning and replacement repairs and supervise mechanical and electrical subcontractors. Responsibilities: Ensures compliance with all relevant safety standards, protocols, and regulations. Conducts routine inspections of service station facilities to identify maintenance needs. Performs troubleshooting and repairs on fuel dispensers, pumps, underground storage tanks, POS consoles, and other equipment as needed. Executes preventative maintenance tasks such as filter replacements, equipment lubrication, and system calibration. Responds promptly to service calls and emergency situations that may take place outside of traditional work hours. Maintains accurate records of maintenance activities, equipment inventory, and service histories. Attends seminars and workshops to improve performance. Perform start-ups of retail and commercial fueling stations Qualifications: Valid driver's license and clean driving record. Obtain and maintain certifications from original equipment manufacturers. Excellent time management skills with a proven ability to meet deadlines. Heavy work frequently working in difficult work positions and/or with physical demands such as continuously lifting/moving materials greater than 70 pounds. Must be capable of climbing ladders to install and retrieve equipment. Job requires frequent kneeling, bending, handling, reaching and standing. The ability to lift and remove a manhole cover. High school diploma, GED or equivalent education required. Technical certification or vocational training in mechanical or electrical systems required. Wayne Dispenser or Gilbarco Dispenser certification. Preferred Skills: Certifications on Veeder Root, Pneumercator, and Omntec. ATG, and knowledge of USTs and ASTs. Benefits Include: Medical, Dental, and Vision Insurance are offered. 401k. Paid Holidays. Paid Training and professional development assistance. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related.

Job Title: Advanced Electronics / Computer Field (ET/FC).Category / Component: Enlisted • Active.The Advanced Electronics and Computer Field trains Sailors to maintain, operate, and repair some of the Navy's most sophisticated electronics and computing systems, including radar, communications, na

Ready to build a career with a company that's leading the foodservice industry?.Here's HOW we help YOU make it!.CDL A Delivery Drivers start at.First year driver annual average: $96,700, increasing to $108,000 at the 12 month mark! (These numbers are inclusive of Overtime).Benefits include medical,

Groundskeeper Residential Properties.Schedule: MondayFriday, 7:00 AM 3:30 PM.Job Type: Full-Time | Permanent | Onsite.Join a Team That Takes Pride in Its Properties.We are looking for a reliable and hardworking Groundskeeper to help maintain the appearance, safety, and cleanliness of multiple resi

Shift Time(s): 9:00am - 7:30pm.Set Schedule: Enjoy a consistent work routine without the fluctuations of an on-demand role.Company-Provided Vehicle: Drive a reliable and well-maintained company vehicle, eliminating the need for personal vehicle use.Supportive Culture: Benefit from a positive and sup

Major duties include but are not limited to:.Altering, modifying and minor construction of items and structures such as: framework, staircases, doors and windows, concrete form building, installing finished paneling and interior and exterior trim, installing metal studded partitions, steel door buck

Independent Same-Day Catering Delivery Driver.DeliverThat is built for the ones who show upthe early risers, the hustlers, and the doers.We're seeking confident and dependable independent contract delivery professionals across the U.Join a driver-first platform that values your time, respects your h

Delivery Driver/h2pStarting wage is based on a number of factors including, but not limited to, the position being offered, location, education, training, and/or experience.The Delivery Truck Driver is responsible for the safe operation of the companys truck with a typical weight capacity of 30-55,0

Field service technician-Permanent role.Perform preventive maintenance Life freeze-drying equipment installed worldwide, ensuring safe and efficient operation.Troubleshoot system errors and failures, identify root causes, and implement corrective actions to restore equipment functionality.Support eq

Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut.That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pizza - and pasta.What more could you want? Independence, good music a

At Manhattan Beer and Beverage Distributors, our vision is to be the leading beer distributor in the market.Imagine building a business from the ground up, with nothing more than 1 truck, 4000 feet of warehouse space, 2 Beer Brands and a lot of determination! Simon Bergson, founder and owner of Manh

We are seeking Class A Drivers to join our team!.Driver shifts are Monday through Friday from between 2am and 5am until the job is done! Drivers will be making deliveries throughout New York and NE! Class A Drivers will have a layover on their route!.This is for the delivery of raw material to mom a

Responsible for accurate and timely delivery of customer's purchases, while ensuring total customer satisfaction.Must comply with all State and Federal laws governing the proper and safe operation of a motor vehicle.Must comply with all State and Federal laws governing the proper and safe delivery o

Shift Schedule: Monday - Friday, 7 am - 4:30 pm.Seasonal Saturdays 7 am - 11 am, depending on the nature of the business.If you're a licensed CDL Driver looking to advance your career with a nationally established company, look no further.ABC Supply, America's largest wholesale distributor of exteri

Independent Catering Delivery Driver.DeliverThat is built for the ones who show upthe early risers, the hustlers, and the doers.We're seeking confident and dependable independent contract delivery professionals across the U.Join a driver-first platform that values your time, respects your hustle, an

Food Transporter/Delivery Driver.We are hiring immediately for a full time Food Transporter/Delivery Driver position.Location: Culinart @ Stony Brook University - 300 Circle Road, Stony Brook, NY 11794 Note: online applications accepted only.Requirement: Previous experience is preferred, but not req

Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading pa

Safely drive trucks to customers and meet scheduled customer delivery times.Carefully unload products from the trailer with a two-wheeler, pallet jack, or by hand and place in designated customer storage areas.Verify accuracy of delivery with custo Delivery Driver, Delivery, Commercial Driver, Drive

Recovery Logistics is seeking a dependable and experienced.Overnight deliveries; home daily.Full-Time Sunday night - Friday morning 11:30pm - 8am.As a CDL Driver for Recovery Logistics, you are the face of our company and one of the most important links in the customer service chain! This position h

To perform daily repairs and maintenance on restaurant equipment, and property within assigned stores and to ensure timely and accurate completion of Preventative Maintenance (PM) schedules.While providing ongoing PM training at the store level.Performs preventive maintenance service, emergency repa

Perks Competitive wages and a versatile working schedule (including opportunities to travel) A challenging, fun atmosphere with a great team Training opportunities and advancement within the company Company purpose statement is “to provide our employees with a workplace that is considered a vehicl

A well-established precision metal manufacturing company is seeking a Maintenance Technician for its Rochester, NY facility.The company serves a diverse customer base across the telecommunications, medical device, automotive, heavy transportation, office equipment, electronics, warehouse management,

Help us succeed as our next UPS Delivery Driver to perform responsibilities as a Delivery Driver.Work with your team to maintain efficiency and high standards.Deliver outstanding service to customers and colleagues.Perks include competitive pay, flexible scheduling, training opportunities, a support

Set Schedule: Enjoy a consistent work routine without the fluctuations of an on-demand role.Company-Provided Vehicle: Drive a reliable and well-maintained company vehicle, eliminating the need for personal vehicle use.Supportive Culture: Benefit from a positive and supportive company culture that va

Location: 700 Furrows Road, Holtsville, NY, 11742, United States.

Shift dispatch time between 3 am-5:30 am start time.Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401 K Employer Matching, Education Assistance, Paid Time Off, and much more Growth opportunities performing essential work to support America’

It should be very clear that Field Service Tech is a traveling role will be in the field and traveling almost all of the time.Plus, the annual performance bonus up to 10%).Perform preventive maintenance, troubleshooting, and commissioning of Life freeze-drying equipment at customer sites worldwide.S

Are you looking for a rewarding career where your contributions truly matter? At Uniland, we offer a culture focused on people, growth, and community.We foster an environment that empowers team members at all levels, supports professional development, encourages volunteerism, and values collaborativ

Title: Facility Maintenance Technician.Duration: Full Time /Direct Hire.Performing inspections, diagnostics, troubleshooting, preventative maintenance, corrective repairs, and system checks on company facilities and equipment.Managing the facility maintenance schedule and coordinating activities wit

Are you a self-driven person looking to advance your career as a high-impact player on a team? If so, we have an exciting challenge for you and your future!.Our culture is built on value commitments to innovation, quality, results, integrity, community, people, and collaboration that fosters a stron

Job DescriptionJob Description.We are seeking a Delivery Driver And Production Member to join our team! We are a wholesale flower company looking for someone to work two to three days a week on-site to help with production and then two to three days a week delivering to stores.Our delivery drivers h

JLL empowers you to shape a brighter way.Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients.We are committed to hiring the best, most talented peopleand empowering them tothrive, grow meaningful career

Are you ready to join a dynamic team of dedicated values-based leaders and professionals who are committed to creating a healthy, addiction-free world?.As a Maintenance Technician at Phoenix House.If this sounds like you, we invite you to apply.Be part of something bigger - help us build a healthier

Catherine of Siena Hospital, affiliated with Catholic Health, is located in Smithtown, NY on a beautiful 110-acre campus that includes a 290-bed community hospital, a 240-bed nursing and rehabilitation facility, and a 60,000 sq.SCS is engaged with error reduction initiatives and on a journey to High

Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs.Darien Lake is looking for mechanically inclined individuals to join our Ride Maintenance Team.As a Full-Time Ride Mechanic, you will be trained and certified to perform inspections, mainten