Offres calibration à Plainfield, New JerseyCréer des alertes d'emploi

Job Description Job Description Job Title: Controls Technician/ Electrician Company Information Our company was established in 1984 as an HVAC service company. We have grown into one of the largest mechanical contractors in NJ servicing large commercial and industrial buildings consisting of chiller plants, built-up penthouses and large HVAC equipment. We believe all customer interactions should be executed with the highest level of professionalism, excellence and competency at all levels of the organization. Minimum Requirements Experienced controls technician with a minimum of 5 years experience with a strong background in installation, commissioning, troubleshooting, repairing and maintaining building automation control systems and devices. Applicant must be able to follow wiring diagrams and engineering specifications to install and troubleshoot. Responsibilities: • Low voltage wiring, installation, termination of building automation controllers and end-devices., • Testing, commissioning and calibration of sensors, valves, dampers, etc., • Troubleshooting and programming of VFD’s., • Programming of application specific controls such as VAV boxes and fan coils., • Installation of MSTP and IP networks., • Be part of the on-call rotation, • Tridium Jace, • Johnson FX, • BACnet IP, MSTP networks, • RTU, Chiller Plants, Boilers VAV boxes sequence of operations, • Valid drivers license, • HVAC building automation knowledge, • Must be able to perform the physical requirement of the job, • Basic computer skills of Excel, Word, and Outlook., • Five years experience with the installation and troubleshooting of building automations systems, • Communication skills (oral and writing), • Able to read wiring diagrams and engineers drawings, • Able to work in a fast-paced environment, • Able to multi-task and focus amid distractions, • Good listener and a team player, • Detail oriented, • Organized, flexible and follow directions, • Able to work overtime when needed

Immediate need for a talented Lab Facilities Specialist - III (Senior). This is a 06+months contract opportunity with long-term potential and is located in Rahway, NJ (Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID: 26-09532 Pay Range: $36/hr - $36.40/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: • Note: Shift: 7.30am-4pm EST., • 100% Onsite Role., • Associate Specialist, Laboratory Operations – Device Development & Technology, • The greatest inventions would not be brought to market without the right project management and operations/administrative support., • Woven into every part of CLIENT Research Laboratories (MRL), our operations/administrative team ensures that our R&D concepts become a reality for patients worldwide., • The MRL Device Development & Technology (DD&T) Organization within Pharmaceutical Sciences & Global Clinical Supply (PSCS) is seeking a highly motivated, Associate Specialist to support laboratory operations., • The position is an in-person position, operating from our Rahway, New Jersey site., • This position will receive day-to-day responsibilities from the Senior Specialist, Laboratory Operations Management – Device & Combination Product development., • Coordinate and perform general laboratory administrative duties including, but not limited to, maintaining testing, calibration and equipment maintenance scheduling, ordering routine & specialty supplies, and facilities management., • Maintain development and GXP laboratory equipment and instrumentation in accordance with internal and industry best-practices/standards., • Coordinate laboratory technical & safety training, including documentation lifecycle management., • Collaborate with key internal & external (outside DD&T) stakeholders to coordinate/arrange new vendor technology evaluations., • Support team with laboratory procurement needs including purchase orders, invoice payments and expense tracking., • Support team with domestic and international shipping of equipment (testing & manufacturing) and product samples (drug & combination product)., • Extraordinary attention to detail, independent judgement, and the ability to prioritize and execute work activities with minimal supervision., • Ability to interact professionally with internal and external colleagues both on-site and remotely to maintain laboratory workflows & operations. Key Requirements and Technology Experience: • Key skills; "calibration", "lab", “calibrate”, "troubleshoot", • Must be able to lift, box, and unbox up to 45 lbs unassisted, • Must be able to move pallets using a pallet jack., • Must be able to walk(5-10miles) everyday, sit and stand for longer duration., • Able to drive golf cart., • Have a valid driver's licence., • High School Diploma, • Minimum 2 years of relevant exeprience. Metrology exeprience preferred., • Advanced computer skills using MS Outlook, Teams, Project, SharePoint, Word, Excel, PowerPoint and Adobe., • Experience in device and combination product characterization & mechanical testing is highly preferred., • Experience in GXP-Analytical laboratory testing or management is highly preferred., • SAP/Concur or related system experience processing purchase orders (PO), expense reports, payment requests, vendor add forms, as well as stockroom inventory reports. Our client is a leading Healthcare Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy ___.

Job Description Summary At Advanced Accelerator Applications, a Novartis company, we are committed to leading innovation in nuclear medicine and delivering the next generation of targeted radioligand therapy to cancer patients. We are looking for experienced Manufacturing professionals to help us reach our ambitious goals. The Engineering Specialist will execute engineering activities (design, implementation, maintenance, etc.) within technical area of expertise by using reliable and cost-effective technical solutions, ensuring technical quality to enable the overall site / project objectives. Responsible for execution of maintenance and calibration activities and commissioning activities for projects at site level. Location: Onsite Job Description Major accountabilities: • Adhere to Novartis Quality Policies and procedures as they pertain to the position to ensure that all products are safe, pure, effective and of the highest quality., • Perform a wide range of maintenance repair activities on production equipment, lab equipment and building management systems., • Provide guidance and leadership to team members., • Assist in troubleshooting and repair of process equipment (example: containment isolator systems, filling line equipment and associated utility connections) which may include mechanical, electrical wiring, pneumatics, motors, pumps, vacuum systems, HVAC, control systems, compressed gases, filling line, under little to no supervision., • Interpret P&IDs, equipment/system layouts, wiring diagrams, and specifications in planning and performing maintenance and repairs., • Support 24x7 site-based operations after startup., • Write/revise accurate operational procedures, training documents and maintenance procedures for various production and utility systems., • Provide radiation safety program support, responsible for calibration and functionality of all radiation detection equipment, • Completes Equipment Work Order Thoroughly, and Accurately and Documents them in the System, • Supply information and technical data for securing spare parts., • Provide responsive customer support with emphasis on customer satisfaction., • Perform startup and commissioning activities as required., • Support and/or perform investigations / deviations from an engineering/maintenance perspective and help with data for timely closure of deviations and CAPAs, • Perform preventative and corrective maintenance on manufacturing process related equipment within a cleanroom environment., • Complete and provide accurate documentation, as required in cGMP operations., • Oversee work and provide training of less experienced maintenance technicians and/or new technicians., • Other related duties as assigned., • Use of CMMS system for documentation of relevant work. The salary for this position is expected to range between $85,400 and $158,600 per year. The final salary offered is determined based on factors like, but not limited to, relevant skills and experience, and upon joining Novartis will be reviewed periodically. Novartis may change the published salary range based on company and market factors. Your compensation will include a performance-based cash incentive and, depending on the level of the role, eligibility to be considered for annual equity awards. US-based eligible employees will receive a comprehensive benefits package that includes health, life and disability benefits, a 401(k) with company contribution and match, and a variety of other benefits. In addition, employees are eligible for a generous time off package including vacation, personal days, holidays and other leaves. Minimum Requirements: • High School diploma or equivalent is required; bachelor's degree is preferred., • 3+ years of relevant hands-on plant maintenance experience in a regulated GMP environment is required., • Previous supervisory, team/project lead experience is preferred., • Previous aseptic fill/finish and/or radio pharmacy experience is preferred., • Previous pharmaceutical or medical device experience is preferred., • Completed training in radioactive or hazardous materials environment is preferred., • Must be able to adhere to all applicable procedures, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.), • Experience working in a team environment, with excellent communication and organizational skills., • Proficient computer skill utilizing MS Office suite applications, Building Management Systems, and Computerized Maintenance Management Systems (CMMS) or similar system., • Ability to climb ladders and lift up to 50 lbs., • Wear and work in protective clothing, including respiratory protection, confined space entry and clean room environments., • Must be flexible to work nights, weekends, and holidays as required. EEO Statement: The Novartis Group of Companies are Equal Opportunity Employers. We do not discriminate in recruitment, hiring, training, promotion or other employment practices for reasons of race, color, religion, sex, national origin, age, sexual orientation, gender identity or expression, marital or veteran status, disability, or any other legally protected status. Accessibility and reasonable accommodations The Novartis Group of Companies are committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or to perform the essential functions of a position, please send an e-mail to or call +1(877)395-2339 and let us know the nature of your request and your contact information. Please include the job requisition number in your message. Salary Range $85,400.00 - $158,600.00 Skills Desired Agile (Programming Methodology), Architectural Engineering, Aws (Amazon Web Services), Business Continuity, Business Networking, Change Control, Computer Science, Construction Management, Cost Management, Flexibility, General Hse Knowledge, HVAC (Heating Ventilation And Air Conditioning), Including Gdp, Installations (Computer Programs), Knowledge Of Capa, Knowledge Of Gmp, Knowledge Of Relevant Tools And Systems, Manufacturing Production, Project Commissioning, Project Engineering, Project Execution, Risk Management, Root Cause Analysis (RCA), Software Development, Total Productive Maintenance

Number ICIMS-2026-9770 Job function QA&RA Job type Full-time Location Werfen - Warren - Warren, New Jersey United States Country United States Shift 1st Introduction Werfen is a growing, family-owned, innovative company founded in 1966 in Barcelona, Spain. We are a worldwide leader in specialized diagnostics in the areas of Hemostasis, Acute Care Diagnostics, Transfusion, Autoimmunity, and Transplant. Through our Original Equipment Manufacturing (OEM) business line, we research, develop, and manufacture customized assays and biomaterials. We operate directly in 30 countries, and in more than 100 territories through distributors. Our Headquarters and Technology Centers are located in the US and Europe, and our workforce is more than 7,000 strong. Our success comes from a specific focus in these rapidly evolving diagnostic areas, our commitment to customers, and our dedication to innovation and quality. We're passionate about providing healthcare professionals the most valuable and complete solutions to improve hospital efficiency and enhance patient care. Overview If you're a QC expert when it comes to manufacturing, Immucor has an exciting opportunity for you! We are looking to hire a Quality Control Technologist III medical device, and/or the pharmaceutical industry. This critical role will Lead QC stability projects, perform Incoming, In-process, final release and stability testing in the Quality Control Laboratory. Act as Team Lead in the QC lab to assist supervisor and Director in daily operations of the Quality Control Laboratory and provide guidance to the QC staff. This position is not eligible for sponsorship for work authorization by Werfen. Therefore, if you will require sponsorship from us for work authorization now or in the future, we cannot consider your application at this time. Responsibilities Job Summary This role will be the team SME (subject matter expert) on product stability. This will include writing stability protocols and reports, performing product testing, and trending stability data. They may lead QC projects, perform Incoming, In-process, final release, and stability testing in the Quality Control Laboratory. They will be a Team Lead in the QC lab to assist the supervisor/ manger and Director in daily operations of the Quality Control Laboratory and provide guidance to the QC staff. Key Accountabilities • Monitors stability testing time points, ensures samples are pulled and tested at the correct intervals, and performs data analysis to support QA/QC management. Drafts stability protocols and reports. Performs trend analysis onstability data throughout the stabiity protocol timeline. Develops timeline for annual stability and determines which products are required., • Provides direction and guidance to Quality Control staff in the performance of daily tasks. Creates daily and weekly scheduling of all QC related activities, • Performs and schedules testing for incoming raw material, in-process, final release and inspection of BioArray products according to approved Standard Operating Procedures (SOP's) and other applicable documents within defined timeframes. Performs and schedules stability, method validations, equipment validations, threshold analysis process and other special testing., • Act as OJT trainer to train new employees and current employees on new test methods. Guides QC technicians training activities and ensures that the appropriate training records are completed as per the role functions, • Reports and escalates out-of-specification results and deviations to the department supervisor/manager. Assists and leads the investigations, root cause analyses, and reports for out-of-specification results and deviations., • Writes/Revises SOPs, WI, QC Specification/testing documents. Maintains accurate, legible, and complete records according to Current Good Manufacturing Procedures (cGMP's)., • Performs all assigned tasks following applicable laboratory SOPs, OSHA regulations and cGMP regulations (i.e. Blood borne pathogens and chemical hazards)., • Bachelor's degree in biology or chemistry or related field. Four (4) or more years experience in a medical device or pharmaceutical GMP quality laboratory. Experience working under 21 CFR Part 210/211 and/or 820 regulations required. Knowledge of ISO 13485 desired., • Two (2) or more years of experience performing stability testing required. Experience writing stability protocols, performing data trending, and writing stability reports preferred., • Experience performing OOS Phase I investigations, in alignment with FDA guidelines, required., • Expereince training QC technicians desired., • Expereience performing PCR (Polymerase chain reaction) desired., • Management has the discretion of substituting relevant work experience for a degree and/or making exceptions to the years of experience requirement. Quality Control Technologist III-Stability If you are interested in constantly learning and being challenged on a daily basis we encourage you to submit your resume or CV. Werfen is an Equal Opportunity employer and is committed to a diverse workplace. Werfen strictly prohibits unlawful discrimination, harassment or retaliation based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other protected characteristic as defined by applicable state or federal law. If you have a disability and need an accommodation in relation to the online application process, please contact for assistance. We operate directly in over 30 countries, and in more than 100 territories through distributors. Annual revenue is approximately $2 billion and more than 7,000 employees around the world comprise our Werfen team.

Job Description This position is 100 percent nights. Reports to: Installation Supervisor or Project Manager Preface: CBM of America, LLC. is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. Summary: The Installation Technician Level 4 will be required to perform all intermediate and advanced installation work activities. The Installation Technician Level 4 should have a clear understanding of all Installation and Quality Standards contained in GR-1275 and NSTD119 Standards as well as specific CBMA and customer local requirements. Duties and Responsibilities: ● Work with minimum supervision and be certified in Skill levels 1, 2 and 3. ● Input job status, issues and requests and all-expense-related information into the Project Management platform. ● Reconcile materials for sales order using web-based inventory control forms. ● Understand the scope of work and customer expectations as well as the profitability objectives and timeframes. ● Control all on-site aspects of the job and work closely with the Installation Supervisor or Project Manager to ensure customer satisfaction. ● Understand the scope of work of the job as well as the efficiency expectations given by the Installation Supervisor or Project Manager. ● Interface directly with the Installation Supervisor or Project Manager and Engineering Department to resolve any order issues. Correct job specifications, drawings, documentation and record all changes in the Project Management platform. ● Maintain tools assigned to the job as well as monitor tool calibration requirements. ● Perform hardware testing, such as power verification, device provisioning and system tests. ● Responsible for all work meeting all customer standards. ● Meet or exceed customer and internal documented acceptable levels of quality. Credentials and Experience: ● Requires minimum of 5 years of Data Center/PoP/CO installation experience. Knowledge, Skills and Abilities: ● Lead Installation Technician should have minimum 5 years Data Center/PoP/CO installation experience. ● Should possess a good mechanical aptitude. ● Should possess a good knowledge of basic power tools. ● Should have the ability to adapt to various work environments. ● Should have good knowledge of optical routing equipment installations. ● Should have good knowledge of fiber optic cable installation & testing practices. ● Should have good knowledge of AC/DC power. ● Should have good knowledge of infrastructure installation work (equipment racks, cable racks and fiber duct etc.) Special Requirements ● Due to the nature of our Customers’ requirements, work schedules and hours of operation are dynamic. The Lead Technician must be able to adjust to varying work schedules which may include all work shifts. ● Travel up to 100%. Installers may be expected to travel periodically to work locations outside of commutable area. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ● The employee will be required to use his/her hands 50% of the time to type, write, and handle paperwork. ● The employee will be required to climb and work off of ladders. ● The employee will be required to work under raised floors. ● The employee will be required to cut and drill metal and concrete. ● The employee must be able to distinguish between different colors. ● The employee will be possibly riding in a company vehicle to and from customer sites, sitting at a desk 10% of the time with walking between offices and other work areas from time to time and working in tight spaces that include computer network infrastructure. ● The employee may, from time to time, be required to lift weight (i.e., paper boxes and installation materials) up to 50 pounds. ● Close vision (clear vision at 20 inches or less) is generally required, as the employee will be working at a computer, working with files & paperwork, working with tools and working on specialized computer & networking devices. Work Environment: ● The work environment can consist of a customer data center, central office, warehouse, computer networking or office network setting. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EEOC Statement: CBM is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy or any other protected characteristic as outlined by federal, state or local laws. Company DescriptionCBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades. Our Mission CBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises. CBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry. We are always looking for passionate, driven and talented individuals to join every facet of our team.CBM of America, LLC (CBMA), is Network Deployment company that has also been an innovator and provider of custom network solutions for the communications industry for over three decades.\r\n\r\nOur Mission\r\nCBM of America, LLC is committed to building a communications technology solutions company consisting of innovative, dedicated and passionate professionals, who are intensely focused on delivering complete customer satisfaction. Our intention is to build a reputation that is second to none for always meeting or exceeding customer expectations by delivering every product, and every service, on time with the highest quality possible. To build a company that always keeps its promises.\r\n\r\nCBM of America prides itself in attracting, developing, and engaging a mix of talent to help address the fast-paced communications service providers industry.\r\n\r\nWe are always looking for passionate, driven and talented individuals to join every facet of our team.

Reviews and approves vendor executed calibration, maintenance, repair, and performance verification records for accuracy, and completeness. Documents and populates calibration/maintenance information in WPT (Work Plan Template) or MDT (Measurement Data Template) using CMMS system. Prepares reports a

The Maintenance Technician is a regular employee in a full-time non-exempt position with the Engineering department at Kashiv BioSciences, LLC, in Piscataway, NJ.This position is responsible for Maintenance, calibration and continuous improvement activities for Kashiv's manufacturing, equipment, uti

Duration: 3-6 months+ (Contract to hire or permanent) JOB DESCRIPTION: Manufacturing Technician reports to and takes direction from the Manager, Manufacturing. Manufacturing Technician performs functions associated with all manufacturing operations, including set-up and calibration tasks, as well as

Job Summary: The Manufacturing Technician will report to the Supervisor of Manufacturing. The Manufacturing Technician performs or leads functions associated with Manufacturing operations, including set-up and calibration tasks, aseptic processing and sampling operations, single-use component set up

Job Description Description Install and repair our complete product line of Navy and Commercial ship board products. Supervise others in the installation on board including running cables, mounting equipment, terminating wires, test the system, commission it and provide crew training. Go on sea trials to verify its operation and calibration. This work can be carried out Worldwide. EMS provides full training on our products. While not in the field, the candidate will work from our New Jersey office with our design engineering group in manufacturing, design and production of new products. Requirements The candidate should have a background in electronics an AAS, BS or equivalent experience. Navy or shipyard background a plus. Should be familiar with all basic test equipment e.g. meters, oscilloscopes. Past experience with PLC'S sensors, temp, pressure, flow, level a plus. Experience in machinery such as diesel engines, generators and switchboards a Plus. Past military experience a plus such as Army, Navy, Air Force, Coast Guard, Merchant Marine a plus. Company DescriptionWe are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ and Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.We are a 47 yr old technology company. We manufacture automation for ships. We have offices in NJ\r\nand Seattle Washington. We design our own cards write our own software .We provide top pay and benefits. Our products sail the seven seas so it's never boring! The White House just announced a new office of shipbuilding be a part of it.

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$34.00 To $50.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description SOKOL GxP Services is seeking a hands-on Calibration Technician to support laboratory and manufacturing equipment within a GMP-regulated pharmaceutical and clinical manufacturing environment in Warren, NJ. This position focuses on calibration, preventive maintenance, requalification of temperature-controlled equipment, and ensuring compliance with FDA regulations, cGMP standards, and ALCOA+ data integrity principles. Key Responsibilities • Perform equipment calibration, preventive maintenance (PM), troubleshooting, and performance verification using CMMS systems (e.g., Maximo or Blue Mountain), • Execute requalification of Controlled Temperature Units (refrigerators, freezers including -20°ree;C / -80°ree;C, incubators, cryotanks, cryopods, storage rooms), • Review and approve vendor calibration and maintenance documentation, • Enter and maintain records in CMMS systems, • Escort and supervise vendors performing calibration and repair services, • Support deviations, investigations, and CAPA activities related to calibration, • Author and revise calibration and maintenance SOPs, • Maintain compliance with cGMP, Good Documentation Practices, and ALCOA+ principles, • Support audit readiness activities, • Perform equipment inventory and assist with planning/scheduling Requirements • Minimum 3 years of experience in an FDA-regulated pharmaceutical or biotech environment, • Hands-on experience calibrating laboratory or manufacturing equipment, • Experience working with CMMS systems (Maximo, Blue Mountain, or similar), • Strong understanding of cGMP and documentation standards, • Ability to troubleshoot and work independently, • Proficiency in Microsoft Office High School Diploma, Associate’s, or Bachelor’s degree accepted. Preferred Experience • Temperature mapping / controlled temperature unit requalification, • Experience in clinical manufacturing environments, • Experience supporting deviations and investigations Work Environment • Laboratory and manufacturing settings (PPE required), • May support multiple local sites, • Occasional lifting up to 25 lbs, • On-call support as required Benefits • $22.42 - $28.48 an hour, • Health, dental, and vision insurance, • 401(k) plan with company match, • Paid company holidays, • Interest free relocation assistance loan, • Continuous professional development and training opportunities through SOKOL GxP Academy

Job Description Technician A Technician performs the assembly, testing, and verification of advanced fluid‐control components for Aerospace, Nuclear and other applications. This role is ideal for a hands‐on technician who thrives in a precision manufacturing environment and enjoys working with complex electro‐mechanical systems. Key Responsibilities • Perform assembly and performance testing of mechanical and/or electro‐mechanical fluid‐control devices in accordance with engineering procedures, blueprints, and schematics., • Operate, maintain, and help develop high‐pressure test systems, including pneumatic, hydraulic, and calibration‐fluid test stands and pumps., • Conduct electrical testing and verification using a variety of electronic diagnostic tools., • Work within controlled clean‐room environments and conduct particulate analysis with accurate data collection., • Troubleshoot, repair, and validate hardware using systematic diagnostic methods., • Utilize oscilloscopes, and other diagnostic equipment to support testing and analysis., • Maintain a clean, safe, and organized work area., • Lift and move equipment or components up to 50 lbs as needed. Required Skills & Experience • Minimum 5 years of technical or mechanical maintenance experience., • Experience using various hand and measurement tools including but not limited to torque wrenches, height gauges, and calipers., • Ability to read and interpret blueprints, schematics, and technical procedures., • Proven experience assembling and testing electro‐mechanical hardware., • Hands‐on experience with high‐pressure fluid, gas, and cryogenic testing., • Proficiency in electrical testing, including dielectric and insulation‐resistance testing., • Strong computer literacy, including Microsoft Word and Excel., • Experience working in clean‐room environments., • Manufacturing or machining experience is a plus., • Demonstrated ability to troubleshoot and repair hardware using diagnostic tools. Education • Minimum: High School Diploma, • Preferred: Vocational school graduate, Associate Degree or Certificate in Engineering Technology Additional Considerations • Strong team orientation and ability to collaborate across functions., • Capable of working independently with minimal supervision., • Willingness to mentor junior technicians. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Salary Range:$29.00 To $45.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description POSITION SUMMARY: The Maintenance Mechanic is responsible for keeping machinery and equipment used in an industrial environment operating effectively. This position is an essential part of the success of the business, and requires proactive thinking to evaluate equipment and diagnose and repair potential problems before critical failure. You will be required to use your acquired mechanical and electrical skills, as well as seeking information from others to find and implement the best possible solutions to keep machinery and equipment in top notch condition and running efficiently as possible. The Mechanic is expected to diagnose issues and deliver solutions. This position requires ability to think and reason, initiative to move forward to complete tasks in a timely manner with minimal guidance, and conduct all business dealings in a professional manner at all times. ESSENTIAL FUNCTIONS: § Inspect machines and equipment regularly for signs of potential malfunctions, including visual inspections, listening for irregular noises, and other preventative measures. § Daily communication with machine operators asking if they are experiencing and issues or irregularities with their equipment. § Recommend Preventative Measures and Activities for routine inspection that will help reduce the risk of equipment failure. § Perform emergency repairs safely and with a sense of urgency. § Utilizing your experience, be a Champion for Safety, bringing awareness and implementing improvements to keep all coworkers safe. Practice safe work habits by using proper and required Personal Protective Equipment (PPE) at all times, and reminding coworkers if necessary. § Prioritize work schedule by understanding the criticality and sense of urgency of the tasks at hand, and communicate with appropriate supervisors and managers to make sure the most urgent tasks are being performed first. § Always maintain a clean work area. Work urgently but safely and with care, following all GMP and Safety Guidelines. § Work in a Professional Manner with all coworkers and team members, treating everyone with respect and dignity at all times. § Utilize CMMS to manage Maintenance Work Orders, Inventory, and Equipment. Complete and generate Work Orders daily. Complete Parts Requisitions and Parts Removal Transactions for all Parts removed from stock. § Complete all Regulatory and Required Paperwork in a timely manner as required. § Complete all Reports and Recordkeeping Documents as requested. Above is not a complete list, but rather a highlight of some of the important tasks required of the position. Other tasks may be required of this position, and will be expected to be performed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be required to: § Work near moving mechanical parts. § Reach with hands and arms. Sit and/or stand for long periods of time (8 hours) § Utilize a Computer Monitor/Screen for long periods of time (8 hours) § Climb or balance utilizing ladders, aerial lift equipment. § Lift and/or move up to 50 pounds. § Push and pull up to 100 pounds. Given the operation of various types of moving equipment used in the facility, adequate communication and observational skills are required, including seeing, speaking and hearing. WORK ENVIRONMENT Job will generally be performed in the manufacturing plant. When on the plant floor it is representative of a large, busy manufacturing operation. Noisy, active, objects on the floor, constant movement and traffic flow of motorized equipment. Hair net, beard net, assigned work uniform, protective eye wear and gloves are among the GMP required apparel that must be worn, if indicated, on the plant floor. REPORTING RELATIONSHIPS: This position reports to the Manufacturing Engineering Manager Critical Operating Relationships: Maintenance Staff Operations Personnel QUALIFICATIONS: Education: Must have a High School Diploma or GED, Advanced technical or college training preferred. Experience: Strong Mechanical and Industrial Experience background. 3+ Years in an Industrial Mechanic position KNOWLEDGE, SKILLS AND ABILITIES: § Experience with basic Industrial Electricity, able to trace and identify electrical sources and identify voltage. Experienced changing Motor, Contactors, Starters, Relays, and other electrical components frequently used in an industrial environment. § Knowledge and basic understanding of PLC’s, VFD’s, and Servo Motors. § Experience with Pneumatic and Hydraulic systems, including understanding of basic system components. § Basic Welding Skills § Basic Plumbing Skills § Must be able to read Technical Manuals and Mechanical and Electrical Drawings/Schematics. § Proficient in the use of hand and power tools commonly found in typical maintenance shops. § Experience of Safe Work Practices of an Industrial Mechanic. Familiarity of OSHA safety standards and regulations. § Must be able to use a Personal Computer and use Internet, Mail, and have basic MS Excel and Word skills. § Excellent written and verbal communication skills. § Excellent Organizational Skills. § Must be able to stand for 8 hours, able to lift heavy objects (50 lbs), use ladders and work from heights, work in tight and/or awkward spaces, work in extreme hot or cold conditions. § Must be able to conduct business in a professional manner with internal and external contacts. § Must have a valid Driver’s License. ACKNOWLEDGMENT § The essential job functions of the job for which you are applying are included in this document. Are you able to perform each essential job function listed above in a safe and reasonable manner? Yes _____ No _____ If not, is there any accommodation that would enable you to perform these functions? Please explain: ADDITIONAL TECHNICAL EXPERIENCE • Strong safety awareness and adherence to GMP, OSHA, and facility safety protocols., • Experience operating, troubleshooting, and maintaining tablet press machinery., • Experience with encapsulation machines, including setup, changeovers, and mechanical adjustments., • Knowledge of coating equipment and related process parameters., • Blender operation and maintenance experience, including V-blenders, ribbon blenders, or similar equipment. ADVANCED TECHNICAL DETAILS • Proficient in diagnosing tablet press issues such as weight variation, compression force imbalance, ejection problems, and punch/die wear., • Experience performing punch and die installation, alignment, lubrication schedules, and monitoring tooling life cycles., • Ability to troubleshoot encapsulation machines including vacuum systems, dosing disk alignment, rectifier timing, and capsule separation issues., • Familiarity with coating pan operation parameters including spray rate, exhaust flow, bed temperature, droplet size, and pattern uniformity., • Skilled in blender preventive maintenance including bearing replacement, agitator shaft alignment, gear reducer inspection, and load testing., • Understanding of dust collection systems, HEPA filtration units, and air handling requirements for tablet and capsule manufacturing., • Experience calibrating pressure gauges, torque settings, load cells, thermocouples, and other process sensors., • Ability to troubleshoot PLC-controlled equipment, interpret ladder logic, and perform minor programming edits when required., • Knowledge of lubrication methods (grease, oil, food-grade lubricants) and maintenance of lubrication distribution systems., • Experience in conducting root cause analysis (RCA) for recurring mechanical failures and implementing corrective actions. SPECIFIC EQUIPMENT QUALIFICATIONS • Tablet Press: Setup, turret removal/installation, punch lubrication, feeder adjustments, compression roller inspection, and resolving tablet defect issues such as capping or lamination., • Encapsulation Machines: Timing adjustments, vacuum troubleshooting, dosing system rebuilds, rectifier alignment, and resolving capsule body/cap separation issues., • Blenders: Preventive maintenance on V-blenders, double-cone, and ribbon blenders including seal replacement, gear reducer service, and verifying blender rotation timing., • Coating Equipment: Spray gun calibration, pump maintenance, exhaust airflow balancing, and troubleshooting coating defects such as roughness or poor adhesion. · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Quality Assurance Technician is responsible for the frontline monitoring of Food Safety and Quality policies, programs, and procedures. This role supports the facility in meeting quality assurance, food safety, and regulatory requirements by partnering with Operations to ensure the consistent production of wholesome, high-quality products. This position reports to the Quality Assurance Manager and serves as a key technical resource on the production floor, assisting in maintaining an "audit-ready" facility while ensuring constant compliance with SQF and FDA regulations. How you'll make an impact * Report and document any food safety or quality issues to the QA Manager and/or SQF Practitioner immediately. * Conduct pre-operational inspections and review checklists to release production areas for daily use. * Perform swabbing (ATP, allergen, biological, etc.), product sampling, and other quality testing. * Conduct daily audits on Good Manufacturing Practices (GMPs) to ensure compliance with 21 CFR 117 and Safe Quality Food (SQF) standards. * Inspect raw materials, work-in-progress (WIP), rework, and finished products; perform regular verifications including high-risk product checks and packaging audits. * Monitor the product hold-and-release process, providing documented reports and tracking data for non-conforming goods. * Assist in investigating deviations from procedures and customer complaints, and support root cause analysis to help prevent recurrence. * Support regular calibration and maintenance of essential facility equipment, such as scales and metal detectors. * Partner with the Sanitation team to verify effective cleaning and support operations staff with real-time food safety and product quality questions. * Actively support record-keeping programs (SafeFoods/EQMS/TraceGains) to ensure data integrity and accurate documentation. * Follow and enforce safety rules to prevent injuries; monitor the production floor for associate, visitor, and contractor GMP and Food Defense compliance. * Perform other tasks as assigned by FSQA management to support department and facility goals. What you'll bring: • Bilingual in English and Spanish is strongly preferred, • 2+ years of hands-on experience in a food manufacturing or packaging environment is desirable., • Ability to read, write, and speak English fluently to complete required safety documentation and reports., • Strong computer proficiency, including experience with Google Doc, Sheets, email, and Electronic Quality Management Systems (EQCMS)., • Ability to work comfortably with handheld devices, scanners, and computers for real-time data entry., • Ability to handle fast-paced situations and use good judgment to make quick, common-sense decisions about product safety., • Great organizational skills and a focus on getting details right every time., • Ability to work well with a team while being independent enough to speak up and enforce safety rules., • Ability to stand for long periods and work comfortably on a busy production floor. What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $19.00 - $20.50/hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

Job Description Full Time Position Hourly range: $19-$21 Company Overview Deep Foods is a major food manufacturer based that specializes in prepared Indian foods and frozen food products. Since 1977, we have been dedicated to delivering high-quality products through innovation and a commitment to excellence. Our mission is to bring authentic Indian cuisine to consumers nationwide while maintaining the highest standards of quality and safety. Summary: We are seeking a dedicated and experienced Turret Operator for our Second Shift to join our manufacturing team at our Union, NJ location. This role is vital in ensuring the efficient operation of turret machines that support our production. Responsibilities: • Follow safety protocols and standard operating procedures., • Conduct routine inspections and troubleshoot issues promptly., • Collaborate with team members to meet production targets., • Maintain cleanliness and organization of the work area., • Assist in setup and calibration of machinery as needed., • Document operational activities accurately., • Proven experience operating Turret, • Strong mechanical aptitude and understanding of machine operation., • Knowledge of safety standards related to manufacturing equipment., • Basic math skills for measurements and calculations., • Excellent problem-solving skills and attention to detail., • Ability to work effectively within a team., • Excellent Communication skills, • High school diploma or equivalent is required

Job DescriptionQuality Tasks · Tool Calibration Program Management· Familiar with the IATF Standard· PPAP for IATF customer· Material Studies Analysis· Gage R&R Analysis for instrument capability· Experience with Control Plans· Experience with PFMEA· Manufacturing Process Audits· Experience with Customer Complaints· Experience with Corrective Actions Production Related Skills · Creates and Maintains SOPs· Ability to troubleshoot production issues and take corrective action· Experience setting process parameters and following up with operators on a shift-by-shift basis· Prefers Hands On involvement with day-to-day production· Works with the operators to foster a continuous improvement environment· Process Improvement mindset· Experience with analyzing daily productivity· Ability to read and interpret part drawings· Ability to multi-task and prioritize Privately held company in steel processing industry offers excellent benefits and opportunity for growth for individual looking to wear many hats. Company is well established with unparalleled reputation as a leader within its industry.

Job Description1st Shift Pharmaceutical Coating Operator Role Overview: Responsible for the application of film or functional coatings to tablets, ensuring uniform quality and appearance while maintaining a sterile environment. Key Responsibilities:· Process Management: Operate coating equipment for commercial and validation batches, ensuring the correct application of coating suspensions.· Cleaning & Setup: Clean coating pans, spray guns, and surrounding process areas as per SOPs to prevent cross-contamination.· Data Integrity: Write and maintain Batch Manufacturing Records and logbooks; monitor environmental conditions within the coating suite.· Calibration: Verify weighing balances daily and document findings in calibration logs.· Change Parts: Manage the inventory and retrieval of change parts, ensuring all components are inspected for integrity before use.· General Support: Participate in equipment qualification and adhere to all facility gowning and safety regulations. Qualifications:· Education: Preferably a Science background.· Experience: 3–5 years of pharmaceutical manufacturing experience is essential. #ZIPNE

Job DescriptionSenior Environmental Scientist, Air Quality Senior Air Scientist Position Overview The Senior Air Scientist will lead research and analysis related to air quality and environmental monitoring, ensuring compliance with regulations and advancing our understanding of atmospheric conditions. This position involves overseeing air sampling projects, data collection, and instrumentation calibration to provide accurate assessments of air quality metrics. The Sr. Air Scientist will lead a team of junior and mid-level scientists. Key Responsibilities • Lead air sampling projects and ensure compliance with environmental standards., • Conduct data collection and analysis related to air quality measurements., • Calibrate and maintain instrumentation used in air quality monitoring., • Develop and implement research methodologies to assess atmospheric conditions., • Collaborate with regulatory agencies to ensure adherence to environmental policies., • Bachelor's degree in Environmental Science, Atmospheric Science, or a related field., • 5+ years of experience in air quality research or environmental monitoring., • Proficient in air sampling techniques and data analysis., • Experience with instrumentation calibration and maintenance., • Strong understanding of environmental regulations and air quality standards., • Medical, Dental, Vision, 401K with base and matching employer stock contributions., • Paid time off to include personal, holiday and parental leave., • Life and disability plans., • Critical illness and accident plans., • Work/Life flexibility., • Professional development opportunities. • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 01/15/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic to join our maintenance team and help keep our production running smoothly. Responsibilities: * Troubleshoot, maintain, and repair plastic processing machinery and equipment * Perform preventative maintenance on machines to ensure optimal performance * Assist with equipment setup, changeovers, and calibration * Maintain maintenance logs and records * Ensure safety standards are followed at all times Requirements: * Mechanical experience in an industrial or manufacturing setting * Familiarity with plastic processing equipment is a plus * Strong problem-solving skills * Ability to work independently and as part of a team * Must be reliable and safety-conscious

Job DescriptionCompany Description The work we do at Eurofins Professional Scientific Services matters, and so do our employees. At Eurofins PSS, we put a focus on your professional growth. We provide our employees the ability to break into the biopharmaceutical industry and grow from the bottom up. We have the supportive teams and tools available to invest in you while also affording you work-life balance and a competitive benefits package. Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. Eurofins believes it is a global leader in food, environmental, pharmaceutical and cosmetics products testing and in agroscience CRO services. It is also one of the global independent market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, CDMO, advanced material sciences and in the support of clinical studies. If you’re looking for a rewarding career, a place to call home, apply with us today! Job Description The successful candidate will be joining the Eurofins, PSS team at a client site to support physical characterization for pharmaceutical products. Analytical Chemist responsibilities include, but are not limited to, the following: • Physical testing of samples to support pharmaceutical formulation development, • Data processing, interpretation and documentation, • Calibration and routine maintenance of laboratory equipment, • Laboratory support activities including weekly eye-wash checks, shipping, and chemical inventory.Qualifications The ideal candidate would possess: • A Bachelor's Degree in Materials Science, Chemistry, Pharmaceutical Sciences or other related discipline with a minimum of three (3) years of industrial experience OR a Master's Degree with at least one (1) year of industrial experience, • Experience with physical characterization techniques such as Powder X-ray diffraction, thermal analysis, vibrational spectroscopy (FTIR, Raman) and/or microscopy, • GMP experience is preferred, • Experience with powder characterization techniques to measure particle size, powder flow, and surface area., • Experience with laboratory automation tools, • Experience with Microsoft office products (Word, Excel), • Ability to multi-task and be self motivated, • Ability to perform duties and responsibilities with minimal supervision Additional Information The position is full-time, first shift, Monday-Friday with overtime as needed. Candidates living within a commutable distance of Rahway, NJ are encouraged to apply. Excellent full-time benefits include: • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays

Job DescriptionCompany Description DCS is a family owned and operated business with treating all employees like family at the core of our values. Our employees provide innovative, safe, and high-quality infrastructure/maintenance contracting services to State DOTs, railroads, and other commercial/residential customers across the entire United States. Employees receive generous compensation packages, employee engagement events & career development programs, just to name a few of the perks of being part of the DCS family! To provide quality service, we need top-of-the-line employees. That is why we offer great compensation, awesome benefits, and a work environment worth bragging about! Job Description DeAngelo Contracting Services (DCS) is looking for a motivated and skilled Hi-Rail Technician with a positive attitude, strong ethics, mechanical expertise, and a strong focus on safety. This position involves spraying herbicide across various railroads and managing the maintenance and operation of trucks and equipment. Major Duties and Responsibilities: • Supervise and manage all jobs/contracts assigned., • Apply herbicides for weed, grass, and brush control across different railroad locations., • Handle daily routing and scheduling tasks., • Perform daily tank mixing of chemicals., • Conduct truck inspections and manage the maintenance and repairs of the truck and spray system., • Calibrate all spray equipment., • Ensure all work is carried out in adherence to strict safety protocols., • Maintain daily and weekly records., • Serve as the primary point of contact with customers., • Address customer and public complaints professionally., • Report any potential liabilities immediately., • Possess a thorough understanding of various weed, grass, and brush species., • Have in-depth knowledge of the chemicals used, including what they control and their safety requirements., • Fully understand application methods, equipment, calibration, and spray patterns.Qualifications EDUCATION: • Must be 21+ years of age., • A valid state drivers license with at least 5 years of clean driving history., • Commercial drivers license preferred., • Willingness to travel away from home for up to 4-6 weeks at a time (hotel expenses covered by DCS)., • Must pass a pre-employment drug test, DOT physical, and background check to work on railroad property., • Commercial Pesticide Applicator License is preferred., • Standard work schedule is Monday through Friday, 7 AM to 4 PM, with shifts typically ranging from 10 to 12 hours., • Some weekend or night work may be required., • Occasional travel to offices during breaks for truck/equipment maintenance., • Work hours may vary based on weather conditions and workload., • Spraying is a seasonal task, aligned with the regional office schedule., • Identifying various weeds, grass, and brush species., • Understanding which chemicals control specific plant species., • Safely operating application equipment., • Learning different field application methods., • Understanding how to properly maintain equipment. Additional Information Benefit Highlights: • Challenging and rewarding work environment, • Competitive Compensation, • Excellent Medical, Dental, Vision and Prescription Drug Plan, • 401(K), • Generous Paid Time Off, • Career Development, • Increase in pay if prior experience in Hi-Rail/Vegetation Spray Industry. Come be a part of the DeAngelo family, today! DCS is an equal opportunity employer and complies with all hiring and employment regulations. In the event an ADA accommodation is needed, DCS is happy to help all employees achieve gainful employment in an atmosphere where they are appreciated and respected. DCS offers subcontracting services to government agencies as such, candidates may be subject to pre-employment screenings such as criminal background checks, pre-employment, post-accident & reasonable impairment drug screenings, motor vehicle record checks, etc. as such, DCS complies with all federal and state regulatory guidelines including the FCRA.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Health insurance, • Paid time off Production Related Skills Creates and Maintains SOPs Ability to troubleshoot production issues and take corrective action Experience setting process parameters and following up with operators on a shift-by-shift basis Prefers Hands On involvement with day-to-day production Works with the operators to foster a continuous improvement environment Process Improvement mindset Experience with analyzing daily productivity Ability to read and interpret part drawings Ability to multi-task and prioritize Quality Tasks Tool Calibration Program Management Familiar with the IATF Standard PPAP for IATF customer Material Studies Analysis Gage R&R Analysis for instrument capability Experience with Control Plans Experience with PFMEA Manufacturing Process Audits Experience with Customer Complaints Experience with Corrective Actions Privately held company in steel processing industry offers excellent benefits and opportunity for growth for individual looking to wear many hats. Company is well established with unparalleled reputation as a leader within its industry.

Job Description1st Shift Granulation Operator Role Overview: Responsible for the preparation and processing of raw materials into granulated forms, ensuring equipment integrity and strict adherence to batch records. Key Responsibilities:· Production Execution: Operate granulation equipment as per Standard Operating Procedures (SOPs) for optimization, validation, and commercial batches.· Documentation: Accurately complete Batch Manufacturing Records (BMR), Batch Packing Records (BPR), and equipment logbooks.· Maintenance & Calibration: Perform daily verification and monthly calibrations of weighing balances; monitor and log area environmental conditions.· Sanitation & Compliance: Clean equipment accessories and process areas according to SOPs; strictly follow facility gowning procedures.· Inventory & Integrity: Manage the inventory, retrieval, and integrity checks of FBP/FBD bags, sieves, and screens.· Technical Support: Participate in Equipment Qualification (IQ/OQ/PQ) and perform other duties as assigned by the Reporting Manager. Qualifications:· Education: Preferably a Science background.· Experience: 3–5 years of pharmaceutical manufacturing experience is essential. #ZIPNE

Job Description Overview Are you ready to take your career to new heights? At Concentra, you will be a vital member of our patient care team and play a crucial role in providing exceptional care to our patients. Our mission is to improve the health of America's workforce, one patient at a time. Join us at Concentra and see how your clinical competency and compassion can make a meaningful difference in the lives of the patients you serve. The Medical Support Specialist (MSS) is responsible for performing routine medical and testing procedures under direct supervision of the treating clinician as well as supports in other areas of the facility as needed including registration and referral management. This role requires efficient and accurate delivery of one-on-one patient care while thriving in a fast-paced environment. The MSS ensures that every patient is treated the with quality clinical care and receives an excellent patient experience from welcoming, respectful, and skillful colleagues. Responsibilities • Perform Department of Transportation (DOT) and Non-DOT drug and alcohol testing, • Prepare patients for physical examinations, including taking vital signs and any required or requested ancillary testing including but not limited to vaccines and injections, phlebotomy, PFTs, audiogram testing and respirator fit testing, • Perform rapid screening tests (influenza, strep, mono, glucose, etc.), • Assist providers during examination and treatment, • Responsible for performing routine medical procedures as ordered by treating clinician as well as triaging emergent patients as needed, • Prepare and assist clinician with procedure set up and injury care, • Apply bandages, dressings and splints as ordered by the treating clinician, • Dispense medications and DME as ordered by the treating clinician in accordance with state regulations, • Complete quality assurance activities on equipment and medical devices as well as testing processes used in the center, • Maintain supplies, clean rooms and equipment, and stock exam rooms, • Maintain and operate all medical devices and equipment, including calibration and record keeping in accordance with current policy and procedures, • Notify supervisor immediately if equipment is not functioning properly, supplies are needed, or facility is not operating as expected, • In partnership with center leadership, assist with patient flow and volume, • Keep patients informed of expected wait times during all aspects of the center visit, • Responsible for clerical tasks in both the front and back office associated with patient care and proper record keeping, • Ensure accuracy in documentation, • Perform front office duties: greet patients, obtain authorization, check in/out, communicate wait times, answer multi-line telephone system, and distribute employer results/paperwork as needed, • Follow HIPAA guidelines and safety rules, • Attend center staff meetings or huddles as required, • Assist in maintaining a neat, clean, and orderly appearance throughout the facility Qualifications Education Level: Vocational/Technical/Business School • Customarily has at least six months or more of medical assistant experience, • Knowledge of medical procedures and medical terminology, • Concentra Core Competencies of Service Mentality, Attention to Detail, Sense of Urgency, Initiative and Flexibility, • Ability to make decisions or solve problems by using logic to identify key facts, explore alternatives, and propose quality solutions, • Outstanding customer service skills as well as the ability to deal with people in a manner which shows tact and professionalism, • The ability to properly handle sensitive and confidential information (including HIPAA and PHI) in accordance with federal and state laws and company policies, • Able to communicate both verbally and in writing in a clear, and professional manner, • Teamwork focus with peers and center leadership team; ability to maintain working relationship with all levels of colleagues, • Must participate in initial and ongoing training as required, • Obtain all certifications required of Medical Support Specialists including but not limited to Drug Screen Collection, Breath Alcohol Certification, Hair and Oral Fluids Collection, • Intermediate knowledge of Microsoft Office such as Word, Excel, Outlook and entry of data into various systems/applications

Job DescriptionCompany Description The work we do at Eurofins Professional Scientific Services matters, and so do our employees. At Eurofins PSS, we put a focus on your professional growth. We provide our employees the ability to break into the biopharmaceutical industry and grow from the bottom up. We have the supportive teams and tools available to invest in you while also affording you work-life balance and a competitive benefits package. Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. Eurofins believes it is a global leader in food, environmental, pharmaceutical and cosmetics products testing and in agroscience CRO services. It is also one of the global independent market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, CDMO, advanced material sciences and in the support of clinical studies. If you’re looking for a rewarding career, a place to call home, apply with us today! Job Description This role involves investigating and characterizing the solid forms of active pharmaceutical ingredients (APIs), including polymorphs, salts, co-crystals, and amorphous forms. Some of the responsibilities include designing and executing solid form screening studies to identify optimal forms for drug development based on properties, other responsibilities include growing single crystals or conducting high throughput screening. • Physical form screening with established protocols to identify novel crystalline forms including polymorphs, solvates, salts and cocrystals under the guidance of a scientific supervisor., • Physical measurements on samples to support chemical process and pharmaceutical formulation development., • Independently execute laboratory experiments and present results in a contextualized manner., • Data processing, interpretation and documentation., • Maintain stock salt solutions, solvents and chemicals up to date., • Calibration and routine maintenance of common laboratory equipment., • Ensure a safe and organized laboratory environment by following all applicable safety protocols and guidelines.Qualifications, • Completed Bachelors degree in a scientific concentration, • 3+ years of experience working in industry lab setting, • Experience with analytical techniques such as XRPD, DSC AND TGA-IR, • Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information The position is full-time, first shift, Monday-Friday with overtime as needed. Candidates living within a commutable distance of Rahway, NJ are encouraged to apply. Excellent full-time benefits include: • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays

Job Description Pharmaceutical Compression OperatorRole Overview: Responsible for the operation and troubleshooting of tablet compression machinery, focusing on precision and tooling management. Key Responsibilities: · Equipment Operation: Set up and operate compression machines for various batch types (optimization, validation, and commercial) following SOPs.· Tooling Management: Responsible for the inventory, retrieval, and inspection of punches, dies, and integrity-sensitive components like sieves and screens.· Compliance Documentation: Maintain precise records in batch manufacturing files and logbooks; enter calibration data for weighing scales.· Quality Control: Monitor area conditions and ensure equipment accessories are cleaned as per standard protocols.· Qualification: Assist in the qualification process for new or existing compression equipment.· Facility Protocol: Maintain high standards of hygiene through mandatory gowning and cleanroom procedures. Qualifications:· Education: Preferably a Science background.· Experience: 3–5 years of pharmaceutical manufacturing experience is essential. #ZIPNE

Job DescriptionJob Title: Formulation ChemistJob Description Join a prestigious and globally recognized brand as a Formulation Chemist. This role offers the opportunity to build direct relationships with end suppliers and be part of a company culture that promotes from within. Enjoy the benefits of a four-day work week while contributing to innovative projects in the chemical manufacturing industry. Responsibilities • Label raw materials accurately and ensure proper labeling practices are followed., • Dispose of raw materials safely and according to regulations., • Print labels and apply them to containers as needed., • Organize laboratory inventory, including raw materials and supplies., • Manage and maintain the Safety Data Sheet (SDS) system., • Oversee inventory management and ensure lab supplies are well-stocked., • Maintain lab cleanliness and order, including dishware, supplies, and raw materials., • Order and manage lab supplies efficiently., • Support equipment maintenance and calibration efforts.Essential Skills, • Bachelor's degree in Sciences, Chemistry, Cosmetics, or Chemical Engineering preferred., • 3-5 years of experience in formulations, labeling, and laboratory procedures., • Proficiency with lab equipment such as pH meter, viscometer, homogenizer, and water bath., • Experience in SDS management and safety data sheet upkeep., • Background in the chemical manufacturing industry, with a preference for cosmetic experience., • Knowledge of regulatory documents and FDA guidelines.Additional Skills & Qualifications, • Experience with cosmetic formulations and lab safety procedures. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Piscataway,NJ. Application Deadline This position is anticipated to close on Apr 2, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Full-time Field Service Technician, responsible for the repair, maintenance, support, and accuracy verification of strength of materials test equipment. UTM. Daily electrical and mechanical repair and upgrading equipment in the field and in the factory. • Two Year Technical Degree or experience preferred, • Drivers license required, • Customer support via phone, in person, and electronically with remote connect software., • Track Customer issues and resolutions, Previous experience with customer service is a plus., • Strong Troubleshooting and critical thinking Skills, • Positive and Professional Demeanor., • Basic electrical understanding of diodes, resistors capacitors inductors, motor controllers, and microprocessors., • Basic operational skills to operate and use a multimeter for measuring Ohms, current, voltage inductance, and capacitance., • Basic Mechanical understanding of and troubleshooting capabilities for gears, shafts bearing belts, and pulleys., • Familiarity with UTM's or Strength of Material Equipment Including Instron, MTS, Zwick, Tinius Olsen, Thwing Albert, and others helpful., • Understanding the principles of load cells and calibration procedures is a plus., • Understanding basic metrology procedures is a plus, • Travel domestically and some internationally will be required on a normal basis, all travel and living expenses are paid for including meals, airfare, car rental, hotel stays, and all meals. Employees can bank frequent traveler points and miles for personal use and personal travel, • Employees are provided with paid time off, 401 K benefits, 100 percent employer health insurance, bonuses, and paid holidays. Company DescriptionInstru-Met Corporation is a small Electro-Mechanical Engineering Company founded in 1974. We are a service-oriented manufacturing Company that provides customers with unique and creative solutions in the Field of Strength of Materials Test Equipment. We provide custom test systems, fixtures, load cells, and calibration services to all kinds of industries including some of the top medical device companies some of the very well-established ones, and many of the new startups that New Jersey is known for. Our equipment and services have been employed to test some of the best tapes and innovative adhesives for the top manufacturer of strong tapes and adhesives. Our equipment and our services have been employed to test the strength of the spacesuits and their components and the metals used in the space crafts used by NASA to keep our astronauts safe during space travel. Our list of clients spans the full spectrum of fortune 500 companies, and we have many startups and entrepreneurial groups who we work with every day. Our service engineering staff helps us keep the test systems in the industry running optimally and accurately to ensure that medical, institutional, industrial, consumer, and government-provided products that are manufactured, tested, and delivered to the world are safe and long-lasting.Instru-Met Corporation is a small Electro-Mechanical Engineering Company founded in 1974. We are a service-oriented manufacturing Company that provides customers with unique and creative solutions in the Field of Strength of Materials Test Equipment. We provide custom test systems, fixtures, load cells, and calibration services to all kinds of industries including some of the top medical device companies some of the very well-established ones, and many of the new startups that New Jersey is known for. Our equipment and services have been employed to test some of the best tapes and innovative adhesives for the top manufacturer of strong tapes and adhesives. Our equipment and our services have been employed to test the strength of the spacesuits and their components and the metals used in the space crafts used by NASA to keep our astronauts safe during space travel. Our list of clients spans the full spectrum of fortune 500 companies, and we have many startups and entrepreneurial groups who we work with every day. Our service engineering staff helps us keep the test systems in the industry running optimally and accurately to ensure that medical, institutional, industrial, consumer, and government-provided products that are manufactured, tested, and delivered to the world are safe and long-lasting.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Plastipak - - Responsibilities: Perform maintenance for blow molding & injection molding manufacturing equipment to assure uninterrupted & optimal operations; Execute & continuously improve preventative maintenance procedures; Participate in changeovers, ensuring efficient & correct execution; Repa

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - - Responsibilities: Assist with repairing, maintaining, installing and troubleshooting industrial equipment, systems and components; Performing preventive/predictive maintenance; Resolving safety concerns; Performing indoor and outdoor housekeeping; Monitoring inventory and mai

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - - Responsibilities: Repair, maintain, install and troubleshoot industrial equipment, systems and components including washers, dryers, steam tunnels, conveyor systems and boilers; Perform preventive/predictive maintenance; Resolve safety concerns; Perform indoor and outdoor hou

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

PackPulse LLC is a veteran-owned company dedicated to providing exceptional field service solutions in the packaging industry.Our mission is to optimize production, ensure product integrity, and enhance the competitive edge of our clients through innovative problem-solving and expert technical suppo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Quality Inspector Needed For Leading Manufacturing Company.This Jobot Job is hosted by: Kevin Finlay.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.My client is a leading manufacturing company and is looking to add multiple Quality Inspector's to th

Installer] - PT or FT / Easy Payments With Competitive Pay Rates / Flexible Scheduling / Access to Handy's Large Customer Base - As a Handy Pro Furniture Assembler you'll: Be responsible for for assembling a variety of furniture pieces in our customers' homes; Assemble a wide range of furniture item

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Temp to Perm A 2nd shift Maintenance Technician ensures the continuous operation of highly specialized equipment and cleanroom facilities during evening hours.They are responsible for troubleshooting, repairing, and performing preventative maintenance (PM) on complex machinery, such as autoclaves, b

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl