Trabajos calibration en Rochester, New YorkCrear alertas

Magnet Medical is seeking a travel Cath Lab Technologist for a travel job in Rochester, New York. Job Description & Requirements • Specialty: Cath Lab Technologist, • Discipline: Allied Health Professional, • Start Date: 10/27/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days, • Employment Type: Travel A Cath Lab Technician (also known as a Cardiac Catheterization Lab Technician) is a specialized healthcare professional who works alongside cardiologists, radiologists, and other medical staff to perform diagnostic and interventional procedures in the cardiac catheterization lab (cath lab). These procedures are primarily focused on diagnosing and treating heart conditions, including coronary artery disease, arrhythmias, and structural heart problems. Cath Lab Technicians are responsible for preparing and maintaining equipment, assisting with catheter-based procedures, and ensuring patient safety during these complex procedures. \n\nKey Responsibilities:\n\n • Prepare the cath lab environment for procedures by ensuring all necessary equipment and tools are sterile, functional, and properly set up (e.g., catheters, guidewires, contrast agents, X-ray machines).\n, • Verify patient information, including medical history, allergies, and consent forms, before the procedure begins.\n, • Assist in the preparation of patients, including setting up the monitoring equipment and ensuring proper positioning for optimal procedure results.\n, • Provide patient education and reassurance before the procedure, explaining what will happen and answering any questions.\n\n\n, • Assist cardiologists and other physicians during cardiac catheterization, angioplasty, stent placement, electrophysiological studies, and other interventional procedures.\n, • Handle sterile instruments, such as catheters, balloons, and stents, during the procedure, ensuring correct placement and maintaining a sterile field.\n, • Operate X-ray fluoroscopy equipment and assist with imaging during diagnostic tests, such as angiograms, to visualize blood vessels and heart function.\n, • Monitor vital signs (e.g., heart rate, blood pressure, oxygen saturation) during procedures and report any abnormalities to the physician.\n, • Administer medications under physician direction, such as sedatives or contrast dyes, ensuring patient safety throughout the procedure.\n\n\n, • Monitor patients for immediate complications after the procedure, such as bleeding, changes in vital signs, or signs of infection.\n, • Assist in transferring the patient from the procedure table to recovery, ensuring comfort and safety during transport.\n, • Help with patient recovery by monitoring cardiac rhythm, vital signs, and the insertion site for any signs of complications, particularly bleeding or hematoma formation.\n, • Provide post-procedure instructions to patients and their families, including advice on post-operative care, activity restrictions, and follow-up appointments.\n\n\n, • Maintain, clean, and sterilize the cath lab equipment and instruments, ensuring they are functioning properly and ready for the next procedure.\n, • Regularly check and troubleshoot cath lab machinery, including X-ray equipment, electrocardiograms (EKG), defibrillators, and patient monitors.\n, • Order necessary supplies, manage inventory, and ensure all materials needed for procedures are available and in good condition.\n, • Assist in the calibration of equipment to ensure accurate diagnostic results.\n\n\n, • Continuously monitor the patient's vital signs during the procedure, ensuring optimal conditions for the intervention.\n, • Ensure proper documentation of patient information, procedures, and outcomes in the electronic health record (EHR) or procedure logs.\n, • Adhere to safety and infection control protocols, including the correct use of personal protective equipment (PPE), sterile techniques, and radiation safety protocols to minimize exposure to patients and staff.\n, • Monitor the catheter insertion site for signs of complications such as infection or clot formation.\n\n\n, • Work closely with cardiologists, radiologists, nurses, and other healthcare professionals to provide high-quality care for patients undergoing catheterization or other cardiac procedures.\n, • Attend pre-procedure meetings to review patient conditions and provide input on the appropriate procedure.\n, • Assist in evaluating the results of diagnostic tests, including angiograms, to support the development of treatment plans.\n\n\n, • Stay up to date with the latest advancements in cardiac catheterization techniques, equipment, and best practices.\n, • Participate in ongoing education, certification programs, and training in areas such as radiation safety, advanced cardiovascular life support (ACLS), and other relevant certifications.\n, • Educate patients about their condition, the procedure they are undergoing, and the importance of follow-up care.\n, • Assist in training and mentoring new staff or students in the cath lab environment.\n\n\n, • Adhere to all regulatory guidelines, including HIPAA for patient privacy, OSHA safety standards, and Joint Commission requirements.\n, • Ensure that all procedures and documentation meet hospital policies, accreditation standards, and industry regulations.\n

Job Description This is a Maintenance Technician specializing in Plastics Injection Molding Machine Repair & Maintenance Schedule: Monday - Friday: 7 am - 3:30 pm Job summary: Perform highly diversified duties to install, troubleshoot, repair, and maintain plastic injection molding equipment according to safety regulations. Perform building and grounds maintenance as directed. Maintain preventative maintenance systems and processes to support manufacturing. Essential Duties and Responsibilities: Perform highly diversified duties to install and maintain plastic injection molding equipment throughout the facility. Provide emergency/unscheduled repairs of plastic injection molding equipment during production and performs scheduled maintenance repairs of equipment during machine service. Perform mechanic skills including, but not limited to, mechanical, electrical, troubleshooting, inspection, and repair of injection molding machines. Read and interpret equipment manuals and work orders to perform required maintenance and service. Tracks and documents all equipment preventative maintenance and repair. Responsible for determining and tracking inventory for all spare maintenance parts. Troubleshoot, repair, maintain, install, and perform testing activities on various computer equipment, injection molding equipment, peripherals, data communication. Assist on production floor with material handling, repairs, and maintenance. Provide contractor support. Preform Simple Machinist duties and responsibilities Additional Responsibilities: Conduct tow motor training. Perform and document regularly scheduled safety checks on tow motors, eyewash stations, and fire extinguishers. Requirements Must have 7+ years of experience with plastic injection molding equipment repair, maintenance repair, required. High school diploma/GED required. Experience in maintenance repairs, installing and troubleshooting, maintaining injection molding equipment and facility equipment; buildings, grounds, and machine maintenance, required. Proficient in MS Office Suite Software, Excel, Word, and Outlook, required. Good communication skills. Automation support (robot arms, conveyors, auxiliary equipment like dryers and chillers). Preventive maintenance & repair (lubrication, part replacement, calibration, safety systems). Electrical troubleshooting (sensors, heaters, controllers, wiring). Mechanical systems (hydraulics, pneumatics, bearings, alignment, mold changes, presses, injection units). Must come from plastics injection molding or precision manufacturing industries. Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethicWe’re Infinia Search. \r\nWe’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic

Job DescriptionDescription: Are you interested in working for a dynamic multi-site manufacturing company that participates in Industrial, Medical, and the Defense markets? A growing organization with experienced leadership and the ability to grow within the organization? A company utilizing the latest technology to enhance the job functions and speed to market to capture more business? One that offers very competitive compensation and benefits? If you feel you have the skill level, desire to grow and are willing to roll up your sleeves and have fun then you should consider applying! Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance POSITION SUMMARY The Lead Quality Inspector is a key facilitator of the quality management system. This role will provide communications between quality, engineering, production, and customers to help projects move through the facility. ESSENTIAL DUTIES · Quality and manufacturing personnel communication and guidance. · Supplier sourcing and development to ensure vendor capabilities, contract expectations, quality and delivery are achieved.? · Develops operational instructions for new equipment, process, and inspection activities.? · Performs FAI (First Article), IP (In Process), FI (Final) Inspections and record findings. · Analyzes process data for suggestions to drive improvements.? · Performs and facilitates root-cause investigation of internal nonconforming material, customer complaints and CAPA activities.? · Participates/facilitates layered process audits. · Participates in the launch of new and changing projects (APQP, PPAP, Change Control).? · Develops inspection fixtures.? · Develops and debugs assembly/test fixture then develop operational procedures and work instructions.? · Maintains the calibration database, process, and records.? · All other duties as assigned. Requirements: MINIMUM REQUIREMENTS · Minimum of AS degree in technical discipline or equivalent work experience. • Minimum 3 years in an industrial environment as a manufacturing or Quality Professional required. (Experience in ISO 9001:2015 preferred), • Ability to read blueprints/drawings and perform Quality Inspection with mechanical/functional gaging and test equipment. · Strong background & knowledge of GD&T · Experience in CMM PC-DIMIS Operating / Programing preferred. · Proficient in Microsoft Word & Excel. Ability to generate quality reports & use of Microsoft Excel & Word Programs · Strong communication skills · Manufacturing Knowledge. · Experienced in ERP Systems (Epicor Preferred)

Job Description QUALITY CONTROL INSPECTOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Quality Control Inspector. The Quality Control Inspector is responsible for performing first piece, in-process, and final inspections. Successful candidates will possess: • A HS Diploma or GED with equivalent work history;, • 5 years of quality control experience;, • Experience with internal auditing and calibration;, • Experience with sheet metal, machining, welding, GD&T, and CMM Programming;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to stand for extended periods, lift items, and operate equipment;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $21.00 - $30.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description Title CMM Mechanical Programmer / Inspector Department Quality Assurance Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The position is responsible for operating and programming the Zeiss CMM. The individual will work with other inspectors to perform Receiving, In-process and Final Inspection of mechanical and other components and assemblies. The individual will be expected to train and assist others in the programming and operation of the CMM, and will perform the calibration of RPO equipment. You will: • Program and Operate a CMM to evaluate mechanical and other parts, • Use the CMM and other standard tools to evaluate mechanical and other parts for acceptance, • Perform Receiving, In-Process and Final Inspection of mechanical and other parts, • Perform First Article and PPAP and other Inspections, • Assist in the specification and design of CMM fixtures, • Perform calibration on various RPO measuring equipment You have: • CMM programming experience (Calypso Preferred), • CMM operating experience, • Ability to use hand measuring tools such as micrometers, calipers, drop gages, thread gages, etc., • Mechanical part inspection experience (Open Plate Layout), • Hand Tool calibration experience, • Ability to work with a great deal of independence, • Good team player, • Ability to train co-workers, • Ability to read, analyze and interpret part drawings, specifications and standards. Ability to communicate effectively to team members and management., • Ability to apply mathematical concepts such as algebra, geometry and trigonometry., • High School diploma. AAS or AS preferred You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a detail-oriented Visual Inspector to ensure product quality through thorough visual examination and inspection processes. This role is crucial in maintaining our quality standards by identifying defects, documenting findings, and preventing non-conforming product from reaching customers. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Requirements: Key Responsibilities: • Audit quality of production during all phases of manufacturing., • Perform first piece, in-progress, and final inspection of machined parts., • Perform Gage calibration and record keeping using Gage Track software., • Develop detailed in-process and final inspection reports., • Interpret various drawing specifications., • Work with both quality and manufacturing engineers to help develop processes., • Ensure documentation is completed in a timely manner, prior to deadlines and precise., • Familiarization with AS9100 and ISO9001:2000 standards Qualification Requirements: • High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus!, • 3+ years of experience within quality inspection in a manufacturing environment. Precision machining experience a plus!, • Experience with quality control techniques and methods, • Experience with standard measuring devices., • Ability to read blueprints and drawings including GDT., • Use inspection equipment efficiently., • Strong interpersonal and organizational skills., • Must be able to multitask while maintaining a high level of attention to detail., • Internal Auditing experience is a plus. Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear., • The job may involve prolonged periods of sitting and standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • May work at different workstations as production needs require, or shifts from one station to another, during the production process.

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking an Control Systems Engineering Intern/COOP who enjoys the challenge of applying controls systems to a utilities infrastructure. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with an interest in industrial and utility systems – able to work collaboratively with mentors and employees to achieve success. Essential Duties and Responsibilities • This position is part of the I&C group within RED-Rochester. The I&C team is responsible for the installation, repair, maintenance and calibration of all control system devices in each of RED’s utility plants. The team is also responsible for programming and maintenance of the Ovation Distributed Control System (DCS)., • Capital Projects – support the development of business cases, assist the project teams execute the completion of these projects, and take charge of small capital projects supporting the improvement of our systems., • Spend time with RED’s operations group learning the hands-on operation of steam boilers, chillers, turbines, valves, pumps, generators, and more., • Work under the direction of RED’s Controls Engineers to design and implement changes to DCS graphics, DCS logic/programming, and final control elements in the field., • Support “day to day” field work with our instrumentation & controls technicians, learning about the installation, repair, testing and calibration of controls system components., • Develop and document preventative maintenance procedures for control systems and control devices on major pieces of equipment (boilers, chillers, turbines, etc.), • Document existing systems, including by making system diagrams of equipment and piping, drawings of controls cabinets layouts and equipment I/O, etc., • Use the OSISOFT PI data collection system to set up data collection from new sources, analyze data from meters/plant equipment/financial models, set up automated analytics and alarming, and build dashboards for use by others., • With support from RED’s Control Engineers analyze the metering for one of RED’s utility subsystems, troubleshoot individual meters, and identify unmetered consumption. Qualifications: • Currently majoring in Electrical, Computer, Chemical, Industrial, or Mechanical Engineering, or related discipline., • Eagerness to contribute to our team-oriented environment., • Excellent leadership, communication (written and verbal) and interpersonal skills, • Valid driver’s license, • Experience working in a Utilities, Facilities, or Maintenance type role preferred, but not required., • Experience working with Microsoft Visio or AutoCAD preferred, but not required., • Basic programming experience (Java, PowerShell, Python, etc.) preferred, but not required. Work Environment • Work may be performed under extreme weather conditions including hot and cold ambient temperatures. Employee will be required to travel between various buildings and work in a plant environment where there are moderate noise levels. Employee will be expected to wear appropriate company-provided personal protective equipment for each location and/or task. Physical Demands • While performing duties of job, employee will be occasionally required to bend, lift, walk, climb, or carry equipment. Employee must occasionally lift and or move up to 50 pounds.

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required., • Lean, Six Sigma, or Kaizen knowledge, is preferred.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. B Shift Monday-Friday 2pm-10:30pm

Job DescriptionQuality Technician Job Description This position is responsible for monitoring the food safety and quality of products and services to ensure they meet all customer and regulatory standards by utilizing quality tools and systems application. Responsibilities • Perform all required product and batch inspection responsibilities., • Maintain work areas and equipment within GMP and GLP standards., • Place non-conforming raw materials, packaging, and finished products on hold as required., • Perform required analytical and microbiological testing as defined by Food Safety and Quality systems., • Verify product codes and chart recorders., • Perform microbiological activities including but not limited to ATP swabs, culture swabs, plating, BacT/Alert3D, and 3M film plating as required by the facility., • Monitor thermal process checks including pasteurizer temperatures and packaging sterilization processes., • Participate in GMP, GLP, Food Safety, and Food Quality programs., • Ensure measurement accuracy by keeping lab equipment in calibration and in operating order through preventative maintenance and troubleshooting., • Perform analytical testing on products, water, raw materials, ingredients, packaging, etc., • Analyze, interpret, and utilize statistical process control data to make informed decisions., • Perform 24-hour sensory evaluation of products in the lab., • Participate in internal inspections and audits., • Maintain accurate paperwork and records to meet all government and company requirements, both physical and electronic., • Communicate quality, food safety, and compliance concerns immediately for prompt resolution., • Communicate quality results and collaborate with cross-functional departments to resolve issues timely., • Collect samples for retention and customer use., • High School Diploma or GED., • Ability to wear personal protective equipment such as a bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses, and leather skid-resistant work shoes/boots., • Ability to apply intermediate computer and communication skills, math functions, and reasoning., • Ability to use tools/gauges such as refractometer, salt titrator, acid titrator, PH meter, color meter, moisture meter, and consistometer. The work environment involves extended standing and frequent moving by foot. There is exposure to extreme loud noises and extreme hot/cold (non-weather) environments. The role requires lifting/carrying less than 30 pounds, reaching, and use of fingers. The position may involve working in high places and near moving mechanical parts, frequent reaching/pulling/bending/climbing stairs/stooping/kneeling/bending, and frequent lifting of over 30 pounds or pushing 80 pounds on a cart. There is potential exposure to caustic substances. Job Type & Location This is a Permanent position based out of Rochester, New York. Pay and Benefits The pay range for this position is $45552.00 - $47632.00/yr. Company Benefits Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Rochester,NY. Application Deadline This position is anticipated to close on Oct 20, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job Description Nesco is partnered with a family owned Company in Henrietta that is looking for an experienced Quality Tech. in a Direct Hire Role! As a Quality Tech, you will play a crucial role maintaining quality standards, and contributing to the overall success of our manufacturing operations. Looking for an opportunity to grow and advance your career in Quaility? Apply Today! Essential Functions: • Excellent use of standard measurement equipment (i.e., micrometers, verniers, etc., • Excellent Blueprint reading skills, • Experience and good skills on comparator, • Program and operate CMM using Pc-Dmis – Required, • Good math and trigonometry skills, • Ability/Availability to work overtime and weekends when required by customer demands, • Experience and good skills with windows applications (i.e., MSWord, MS Excel, etc.), • Experience and good skills with SPC, ISO9002, and other quality standards/techniques., • Some knowledge of tool calibration standards and techniques., • Review proposals (i.e., prints) to ensure a proper quality plan is feasible with the given job, • Institute quality plan for WIP jobs., • Actively seek out WIP jobs and complete First-Off inspections to assist in the timely delivery of customer products., • Familiarize yourself with shipment priorities and ensure that these jobs are not delayed due to quality/inspection reasons., • Reduce scrap through accurate First-Off inspections and awareness of faulty machining procedures., • Inspect incoming materials (tools, material, customer returns, etc.), • plete and file all applicable Inspection/Quality paperworkCom, • Interface with customers for inspection techniques, quality issues, and reporting when necessary., • Oversee all operations in AFM absence, • Communication with all AFMs and CETs as needed., • Trouble shoot with team members as needed to maintain workflow., • Monitor and improve efficiency, • Work and effectively communicate with co-workers and supervisors., • Ability to adhere to the Core Values of the Company. REQUIREMENTS Education: Minimum of High School Diploma or equivalent. Minimum 2 years advanced education-in-trade Experience: Minimum 5 years work experience in area of work Shift: 3 PM - 11:30 PM, Monday - Friday Pay: $52,000 - $58,000 (Based on Experience) Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Description Title Assembler Department Assembly Reports to Assembly Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary An RPO Assembler will be responsible for producing high precision assemblies or components with strict adherence to established work instructions and specification sheets. The job requires a very high level of concentration and fine detail, along with the ability to maintain consistent process proven by frequent in process inspection. In addition to processing parts, an assembler will perform testing using various optical test equipment and will also maintain all required build records. This role will be performed in a class 10,000 clean room. You Will: • Use tools and equipment to produce high precision assemblies or components and meet daily production targets, • May require the use of test equipment to measurements of completed work and work in process, • Weight, properly label and transfer chemicals and adhesives for use in assembly, • Communicate with lead, supervisor or area manager about any issues or problems in production immediately, • Process parts or components on jobs in que 100% of your available time, • Ensure that all required data entry is occurring for each job and that all required information is being accurately entered, • Adhere to check good pass good inspection criteria and in process inspection for all jobs, this includes daily calibration and expiration checks for all areas work is to be done., • Strict adherence to trained process / work instruction and ownership of communicating any inconsistencies, questions or issues, • Clean and maintain tooling, machinery and work area daily, • Follow all company safety precautions, policies and procedures. You Have: • Minimum of 2 years’ experience in a fast-paced, production/manufacturing environment related to precision assembly or equivalent work experience desired, • Optical Assembly experience a plus!, • GED or High School diploma – prefer vocational education, • Familiarity with computers to include but not limited to Microsoft Office, • Proficient math skills, • Ability to follow, repeat and adhere to detailed instructions while maintaining an attention to detail, • Ability to work in a challenging, fast paced and high-stress environment, • Good mental dexterity and visual acuity, • Excellent communication skills, • Can maintain clean environment and works to maintain the environment as such., • Good time management skills You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, reach with hands and arms and to use hands and fingers to handle, maneuver parts, • The employee frequently is required to stand, walk, stoop, kneel, crouch, talk and hear, • The job may involve prolong periods of sitting/standing, • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp, • The employee is frequently required to use the computer, • The job may require regular lifting of up to 50 lbs., • Job requires flexibility in schedule and potential overtime or weekend work Work Environment: • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required, • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as needs require Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. RPO offers a competitive work life balance with the opportunity to grow within a unique industry and along with a collaborative, motivated team to drive key programs.

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: Customer- Champion of customer advocacy, responsible for transforming the Voice of the Customer into actionable opportunities and driving customer satisfaction through data-driven analysis for prioritization of corrective measures and improvement opportunities. Systems- Responsible for championing the Integrated Business Management System (IBMS), maintain certification to ISO9001, 14001, FSSC and other standards as required, provide training, and writing procedures and processes to support the IBMS development. Lead and undertake audits across all areas of the business as well as across the supply chain. Maintain statistical tools for continuous quality and profit improvement projects. Lead and drive improvement actions from audits, customer complaints, and continuous improvement. Be the change agent for quality related projects. Validation- Apply project management and technical expertise to successfully deliver Validation program goals and outcomes while interacting with customers and meeting their expectations. ESSENTIAL DUTIES AND RESPONSIBILITIES: Customer • Leadership and management of customer complaint program including associated return and credit authorizations, leadership of team to identify root causes, implementing corrective actions to prevent recurrence and mitigate future quality risks, and timely communication back to customers., • Monitoring and reporting of complaint and quality data and trends for area dashboards, operations review, and systems management review., • Execution of formal weekly/monthly/annual Complaint Performance Reviews and reporting of complaint status to management team., • Provide backup for Quality Supervisors and Quality technicians., • Travel as required to work with customer, understand their concerns, and resolve issues., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Systems • Oversee effective implementation of the IBMS including applicable certifications., • Maintain manuals and procedures and determine future procedural needs of the business., • Organize and manage the internal audit system and the corrective action system., • Host external audits, conduct internal audits and assist in training of other auditors., • Collect and analyze quality data and report on Key Performance Indicators (KPIs) to drive improvement., • Project leader for quality and continuous improvement activities and promote the use of improvement tools such as Six-Sigma, Error Proofing, and Measurement System Analysis., • Statical analysis of data using Excel, JMP, Minitab or other statistical software tools., • Recommend Capital projects that improve Safety, Productivity, and Quality within the operation., • Be the next level for complaint resolution with customers beyond the administration of the complaint. Duties would include identifying root cause, implementing corrective actions, and driving projects to proactively mitigate future quality risks., • Manage the scope, schedule, and reporting of Validation program activities for individual products and/or customers; ensure status, risks, and open issues are tracked and that all stakeholders (Management, internal/external clients, Business Managers/Project Managers, and regulatory agencies) are informed in a timely manner., • Write and execute IQ/OQ/PQ validation protocols and management of associated deviation process., • Management and leadership of change control process, calibration process, and gage R&R process., • Provide hands on support to the manufacturing areas as required to assist in problem solving and long-term changes that provide product/process improvements in relation to process failures. Collect and analyze data to make data driven recommendations/decisions., • Participate in process failure investigations., • Maintain up to date knowledge of validation requirements, practices, and procedures and instruct other members of the site participating in validation studies., • Support risk analysis activities, including design and process FMEA., • Facilitate team meetings as needed on in-depth process and product analysis, risk assessments, decision-making, and other evaluations related to the Validation program., • Assist in internal and 3rd party audits., • Provide backup for Quality Supervisors and Quality technicians., • Drive continuous improvement opportunities utilizing lean six sigma and the seven basic quality tools, to benefit the success of APC, including profit improvement plans, long and short-term strategic objective, helping establish problem solving teams and methods, and recommend capital projects that improve Safety, Productivity, and Quality., • Write and improve manuals, standards, and procedures as needed., • Use of statistical software and techniques for analysis of data including Process Capability (Cpk, Ppk), Statistical Process Control (SPC), and Design of Experiments (DOE), • Other duties as assigned. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Systems - Bachelor's degree (B. A.) from four-year college or university; and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a plus. Customer & Validation - Bachelor's degree in science, mathematics, or engineering from four-year college or university, and two years related experience and/or training; or equivalent combination of education and experience. ASQ certification is a preferred. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Systems - Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. Demonstrated use of Minitab or JMP is a preferred skill. Customer & Validation - Ability to apply advanced mathematical concepts. Ability to utilize descriptive statistics (average, variation, standard deviation) to analyze data and support process control and capability analysis. Ability to create and interpret control charts, histograms, pareto charts, and scatter diagrams. Ability to develop statistically appropriate sampling plans. Ability to use and learn statistical analysis software. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS Systems - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, use hands to finger, handle or feel objects, tools or controls. The employee is occasionally required to sit, reach with hands and arms, stand, walk, stoop, kneel, crouch or crawl and climb or balance. The employee is regularly required to hear. The employee must occasionally lift and/or move up to 50 pounds. Any lifting over 50 pounds would require assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Employee must also be able to taste/smell. WORK ENVIRONMENT Systems- The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to talk or hear. The employee is occasionally required to walk. Customer & Validation - The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: A Maintenance Coordinator maintains supplies for all departments so they can meet production schedules and machines are kept in a good operating manner. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Purchasing: Purchase maintenance repair, and operational supplies for all departments, and occasional capital expenditure items. This includes researching parts, checking pricing, placing orders, entering purchase orders, tracking fulfillment, and solving invoice problems. When items deemed hazardous are purchased, obtain SDS information and forward it to the central filing system., • CMMS Maintenance and Administration: Regularly monitor and maintain the computerized maintenance management system, including administration of modifications and reporting as directed by engineering., • Inventory: Inventory Control includes putting parts away in the proper location, matching the receiver with the purchase order, and updating inventory daily by adding newly received or subtracting parts used for repairs from the database., • Physical Inventory: Adding parts to the database and completing physical inventory audits, including correcting the proper location, vendor, description, or part number., • Electronic Work Order Maintenance: Produce work order reports for department managers and supervisors to review. Generate weekly all scheduled preventative maintenance work orders and add new PMs or edit existing PMs, including tasks and schedules as needed., • Commitment Logs: Maintain the capital expenditure equipment logs, charitable contribution logs, contractor logs, and any insurance logs as necessary., • Calibrations: Facilitate all department calibration schedules, including entering and maintaining data with the specified calibration software., • Repairs: Manage items that must be sent for repairs by obtaining vendor quotes, obtaining manager approval or replacement, issuing purchase orders, preparing paperwork, packaging, arranging transportation, daily tracking, and monitoring to ensure timely returns and repairs., • Documentation: Accurate, timely, and organized documentation or filing of all related and necessary paperwork. Maintaining equipment manuals, manufacturer spec sheets, standard operating procedures, and updated maintenance or equipment documentation., • Meetings: Maintain agenda and meeting minutes for department and capital expenditure meetings., • Vendor Management: Meet with vendors and suppliers to review products or proposals and present them to the Plant Engineer, Maintenance Supervisor, or other department managers for consideration., • Bids: Obtain bids for ancillary plant services such as vending, janitorial, first aid supplies, and uniforms, procure these services, and establish schedules around production., • Purging Files: Purge purchase orders and call on any outstanding balances. Purge year-end work orders and purchase orders., • Monitor Timecards: Reconcile and correct maintenance electronic timecard entries for accuracy before payroll deadlines. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representatives of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. While doing inventory you stand, climb, stoop frequently. While putting parts away you lift parts that usually weigh 1lb. to 35lbs. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description RED-Rochester is a multi-utility generation plant and district energy supplier to one of the world’s most comprehensive industrial parks: the Eastman Business Park. Supporting a 1,200-acre campus, RED-Rochester has the utilities, infrastructure, technical services, support services, space and complementary regional resources to benefit a wide range of industry verticals. We are seeking a Utility Measurement Technician who enjoys the challenge of supporting utility services through inspecting, calibrating, installing and maintaining measurement equipment for a utility provider. Our infrastructure consists of a blend of classic and modern industrial assets and requires a person with broad industrial and utilities expertise – able to instruct and advise others; able to manage both up and down the organization; and able to work collaboratively with other departments to achieve success. Responsible for the installation, maintenance, calibration, and repair of various measurement equipment to accurately meter steam, water, thermal systems, and gases. Working directly with a wide variety of meters such as differential pressure, vortex, ultrasonic, positive displacement, and other types. Duties include interacting with customers on occasion to resolve measurement issues. Essential Duties and Responsibilities  Maintains and troubleshoots measurement equipment.  Performs calibrations on meters including blowing down and calibrating orifice plates.  Assists with new meter installations.  Performs and documents routine maintenance and checks of meters.  Inspects and calibrates instruments and test equipment periodically and adjusts calibration to ensure functioning within specified or established standards.  Install, repair, and replace insulation jackets and/or heat trace (both electric and steam) for impulse lines.  Interacts with engineering, project management, operations, customers, and other technical groups as required to resolve issues.  Assist other technical groups as needed.  The ability to effectively communicate, both verbally and in writing, with other individuals, teams, customers, and stakeholders of the business, at various levels of the organization, in a business-like and professional manner is required. Education and/or Experience: • High School Degree/GED (Required), • Relevant vocational school degree or certification (Preferred), • Experience working in a plant or utility environment (Required), • Experience working with steam systems (Preferred), • Experience working with pressure, flow, and/or temperature measurement (Required), • Utility metering experience (Preferred) Qualifications  Must have valid drivers’ license and proof of insurance  Must be able to operate a lift (working up to 40’ overhead) and ladders. (Lift training will be provided).  Ability to work in a variety of physical environments at varying temperatures (hot and cold).  Capable of lifting/carrying/pushing/pulling up to 50 lbs  Capable of vigorous outdoor activities and have manual dexterity with physical ability to work extended hours, climbing, bending, kneeling, squatting, working with arms extended above the head, twisting upper body, standing for long periods, walking on catwalks, working in confined spaces, exposure to extreme weather conditions, driving a vehicle, operation of forklifts and light industrial equipment Competencies: • Knowledge of utility measurement principles and meter technologies., • Knowledge and demonstrated practice of industrial safety/OSHA rules/regulations, including Lockout/Tagout, Confined Space Entry, Fall Protection, Electrical Safety, and others., • Familiarity with Microsoft Windows and Microsoft Office software., • Good communication skills in English., • Excellent problem solving and demonstrated trouble shooting skills., • Strong mechanical and electrical aptitude., • Ability to follow procedures, work instructions and environmental rules and regulations., • Ability to recognize opportunities for process improvements and assist in implementation., • Ability to work both independently and in a team environment., • Ability to consult manuals, read and interpret circuit diagrams, electrical schematics, and other drawings.

Job Description Schedule: Monday-Friday 7:30am-4pm Overtime: Possible, if needed on Saturday's (6am-12pm) Position Summary: We are seeking a detail-oriented Visual Inspector to ensure product quality through thorough visual examination and inspection processes. This role is crucial in maintaining our quality standards by identifying defects, documenting findings, and preventing non-conforming product from reaching customers. Key Job Responsibilities: • Audit quality of production during all phases of manufacturing., • Perform first piece, in-progress, and final inspection of machined parts., • Perform Gage calibration and record keeping using Gage Track software., • Develop detailed in-process and final inspection reports., • Interpret various drawing specifications., • Work with both quality and manufacturing engineers to help develop processes., • Ensure documentation is completed in a timely manner, prior to deadlines and precise., • Familiarization with AS9100 and ISO9001:2000 standards Job Qualification Requirements: • High school diploma or GED Required; Trade/Vocational certificate in precision machining a plus!, • 3+ years of experience within quality inspection, 1st piece visual and final inspection within fast-paced manufacturing environments, precision machining experience a plus!, • Experience with quality control techniques and methods, • Experience with standard measuring devices., • Ability to read blueprints and drawings including GD&T., • Use inspection equipment efficiently., • Strong interpersonal and organizational skills., • Must be able to multitask while maintaining a high level of attention to detail., • Internal Auditing experience is a plus. What We Offer: • Competitive salary based on experience, • Comprehensive benefits package including medical, dental, and vision, • 401(k) with company match, • Paid time off and holidays, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, walk, stoop, kneel, crouch, and talk and hear., • The job may involve prolonged periods of sitting and standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud.

Job DescriptionYoh is looking for an experienced Engineering Technician – Custom Mechanical/Electromechanical Assembly to join our client L3Harris in Rochester, NY. Job Summary Yoh is hiring an Engineering Technician for a contract role with L3Harris Technologies in Rochester, NY. This position is ideal for candidates with strong hands-on experience in assembling custom mechanical and electromechanical products, such as transit cases, racks, and panels, and supporting technical operations in a production or engineering environment. Responsibilities • Assemble and troubleshoot custom mechanical/electromechanical systems., • Perform calibration, alignment, and testing of components and devices., • Assist in the setup and checkout of test equipment., • Interpret schematics, engineering drawings, and technical documentation., • Conduct quality checks and maintain accurate records., • Collaborate with engineering and production teams to resolve technical issues.Qualifications, • High school diploma or equivalent required; technical training or associate degree preferred., • 2–4 years of experience in mechanical/electromechanical assembly or engineering support., • Proficiency with hand tools, wiring, and diagnostic equipment., • Ability to follow established processes and escalate issues appropriately., • Strong attention to detail and communication skills., • 3-6 month contract assignment, • Shift: Monday – Friday from 7am-3:30pm Patty Martin - Estimated Min Rate: $20.00 Estimated Max Rate: $23.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description Are you looking for a new Manufacturing opportunity with a set schedule? If so, Yoh has several Manufacturing Test Technician positions available on all shifts with our client L3Harris located in Henrietta, NY. Estimated Min Rate: $18.00 Estimated Max Rate: $22.50 What You’ll Be Doing: • Technicians will be performing circuit card and box level testing on RF/Digital assemblies. Go no Go Testing., • Responsible for performing functions associated with all manufacturing operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, subassemblies, and final assemblies * This job requires you to stand the entire shift What You Need to Bring to the Table, • Possess a positive attitude and the ability to work in a team environment. Good hand dexterity, solid computer skills and communication skills., • Previous QC or Inspection experience. Strong attention to detail, • High School Diploma or GED/HSE, • All offers are contingent to passing all pre-employment screenings and drug test. This includes testing negative for marijuana, • 1st Shift – Monday, Tuesday, Wednesday & Thursday from 5am-3:30pm @ $18.00an hour, • 2nd Shift – Monday, Tuesday, Wednesday & Thursday from 3:30pm -2am @ $19.80an hour 2nd shift will require training on the 1st shift for 2 weeks. What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job DescriptionHR Works has teamed up with a manufacturer in Rochester, NY seeking a strategic and hands-on Human Resources Business Partner (HRBP) to join our team in a dynamic, high-growth environment where HR is highly visible and deeply valued. This role is ideal for a proactive, data-driven HR professional who thrives in fast-paced settings and enjoys partnering closely with leadership to drive business results through people strategies. Key Responsibilities • Strategic HR Partnership: Align workforce strategies with business goals, acting as a trusted advisor to site leadership., • HRIS & Process Ownership: Manage HR systems and site-level processes with precision and accountability., • Employee Lifecycle Management: Lead exit interviews, analyze retention trends, and implement strategies to improve employee experience., • Workforce Planning: Forecast labor needs and support staffing strategies across all shifts., • Talent Development: Facilitate succession planning and career development for high-potential employees., • Performance Management: Lead goal-setting, coaching, evaluations, and performance calibration with autonomy., • Employee Engagement: Design communication strategies to enhance understanding of HR policies and cultural initiatives., • Employee Relations: Provide mature, calm guidance in sensitive situations; de-escalate issues and coach leaders through resolution., • Training & Development: Deliver HR-led training on compliance, leadership, interviewing, and skills development., • Change Management: Act as a change agent during organizational transformation, navigating ambiguity and driving engagement., • Culture & Safety: Promote a positive work environment and safety culture through proactive initiatives., • People Analytics: Use workforce metrics (e.g., turnover, retention, internal mobility) to inform decisions and anticipate risks., • Compliance: Ensure adherence to labor laws, regulations, and internal policies., • Candidate Selection & Onboarding: Play an active role in hiring and onboarding processes., • Consultative Influence: Challenge and advise leaders thoughtfully, balancing empathy with business acumen., • Employer Branding: Represent the company at job fairs and community events to strengthen talent pipeline.Qualifications, • Education:, • Bachelor’s degree in Human Resources, Business, Industrial/Labor Relations, Organizational Psychology, or related field required., • Master’s degree preferred., • Professional certification (PHR, SPHR, SHRM-CP) preferred., • Experience:, • Proven experience in HR business partnering, employee relations, performance management, and workforce planning., • Experience in manufacturing or operational environments preferred., • Background in FDA-regulated or GMP environments is a strong plus., • Skills:, • Strong communication and influencing abilities across all levels., • Highly organized with discretion in handling sensitive matters., • Analytical mindset with ability to translate data into strategic insights., • Professional maturity and consultative approach in employee relations. TfrBvBMPEQ

Job Description General Job Description: In this position, the Quality Technician performs dimensional and/or functional inspection on purchased materials and manufactured parts. Uses technical expertise and inspection instrumentation to verify conformance of materials/parts to prints, process sheets and specifications. Minimum Qualifications: • Know & understand the use of all inspection equipment including (but not limited to):, • Micrometers, • Calipers, • Dial Indicators, • Height Gages, • Optical Comparators, • Gage Pins and Gage Blocks, • Sine Blocks and Setups, • Surface Finish Testers, • CMM, • Thread Gages, • Understand basic Geometric Tolerance. Able to read and understand drawings, • Knowledgeable about current quality system standards such as ISO-9002 and/or TS16949, • Ability to multitask in response to numerous demands; time management skills, • Computer literate: Excel, Word, etc., • Attention to detail Desired Skills: • Experience with inspection and measuring equipment calibration, • Previous auditing experience and skills, • Experience writing procedures and work instructions, • PPAP documentation experience

About LiDestri Food and Drink LiDestri Food and Drink has grown from our roots as a pasta sauce and salsa manufacturer to become an R&D engine, formulating and producing innovative food products for our national and retailer brand partners. A family-run company based in Rochester, NY, LiDestri employs over 1,000 people across three U.S. locations. We have decades-long partnerships with some of the most respected consumer packaged goods (CPG) companies and the most highly inventive retailer brands. Excellent Pay and Benefits: • Great career-pathing, • Professional development, including unlimited online training courses, • Health insurance with premium contributions, • Dental, vision, HSA, • 100% company paid life insurance and long-term disability, • 401k - with employer match, • Paid time off to include- vacation, sick pay, wellness time off, and 10 holidays, • Company bonuses This position is responsible for monitoring the food safety and quality of products and services to ensure they meet all customer and regulatory standards by utilizing quality tools and systems application. DUTIES & RESPONSIBILITIES: • Performs all required product and batch inspection responsibilities., • Maintain work areas and equipment within GMP and GLP standards, • Place non-conforming raw materials, packaging, and finished products on hold as required., • Perform required analytical and microbiological testing as defined by Food Safety and Quality systems, • Verify product codes and chart recorders., • Perform microbiological activities including but not limited to ATP swabs, culture swabs, plating, BacT/Alert3D and 3M film plating. (As required by facility), • Monitor thermal process checks including pasteurizer temps and packaging sterilization processes., • Participate in GMP, GLP, Food Safety, Food Quality programs, • Ensure measurement accuracy by keeping lab equipment in calibration and in operating order through preventative maintenance and troubleshooting., • Verify product codes and chart recorders;, • Perform analytical testing on product, water, raw materials, ingredients, packaging, etc., • Analyze, interpret and utilize statistical process control data to make informed decisions, • Perform 24-hour sensory evaluation of products in the lab., • Participate in internal inspections and audits., • Maintain accurate paperwork and records to meet all government and company requirements, physical and electronic., • Communicate quality, food safety and compliance concerns immediately for prompt resolution., • Communicate quality results and collaborate with cross functional departments to resolve issues timely., • Collect samples (retention, customer), • High School Diploma or GED;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable), Kevlar gloves, safety glasses and leather skid resistant work shoes/boots);, • Ability to apply intermediate computer and communication skills, math functions, and reasoning;, • Ability to use tools/gauges (refractometer, salt titrator, acid titrator, PH meter, color meter, moisture meter, consitometer);, • Self-motivated, ability to work independently; Ability to work in a manufacturing environment with exposure to: • Long periods of standing/moving, working around moving mechanical parts/conveyors, • Loud environment, hot/cold, wet/dry conditions, • Lifting/carrying

Job Description Job purpose This position is responsible for final processing of magnets received from our manufacturing floor. This can involve the following tasks: Cleaning and Visual inspection, Magnetizing, Calibration/Testing, and Packaging. Duties and responsibilities • Setup and operate the equipment per technical instructions., • Change machine fluids and clean machine and tanks per PM log., • Operate multiple machines at once., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Sign off the operation sheet and note the quantity of good and bad pieces when the operation has been completed, • Maintain part and identification during processing., • Properly identify nonconforming material., • Verify completed operations match blue prints., • Maintains tooling to perform at maximum efficiency., • Report any wear and tear., • Maintain an immaculate work environment and machine work area., • Follow company written policy and documented procedures., • Must possess as a minimum a High School Diploma or Equivalent., • Previous experience in a manufacturing setting preferred., • Experience handling fragile materials., • Experience in lean manufacturing environment is desired., • Experience operating within AS9100 (preferred) or ISO systems., • Great communication skills, • Able to work in a small team setting., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work., • Periodic lifting of materials not to exceed 50 pounds. Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Job purpose This position is responsible for final processing of magnets received from our manufacturing floor. This can involve the following tasks: Cleaning and Visual inspection, Magnetizing, Calibration/Testing, and Packaging. Duties and responsibilities • Setup and operate the equipment per technical instructions., • Change machine fluids and clean machine and tanks per PM log., • Operate multiple machines at once., • Review Operation Sheet to assure all previous operations have been satisfactorily completed., • Sign off the operation sheet and note the quantity of good and bad pieces when the operation has been completed, • Maintain part and identification during processing., • Properly identify nonconforming material., • Verify completed operations match blue prints., • Maintains tooling to perform at maximum efficiency., • Report any wear and tear., • Maintain an immaculate work environment and machine work area., • Follow company written policy and documented procedures., • Must possess as a minimum a High School Diploma or Equivalent., • Previous experience in a manufacturing setting preferred., • Experience handling fragile materials., • Experience in lean manufacturing environment is desired., • Experience operating within AS9100 (preferred) or ISO systems., • Great communication skills, • Able to work in a small team setting., • May be exposed to industrial oils, toner, coolants, solvents, lubricants, adhesive and other chemicals. NOTE: All safety precautions will be used., • Plant wide climate control and air conditioning, • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work. Monday - Thursday: 2:45pm - 12:15am Friday: 2:45pm-6:45pm Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Hello, we're Belong. We partner with regional payers to deliver Medicare Advantage and Special Needs Plan products. With a dual focus on data-driven, proactive clinical intervention and unwaveringly empathetic patient experience, Belong has completely reimagined health insurance for seniors and other Medicare-eligible individuals who have been disregarded and deprioritized for far too long. We believe that only by recognizing individuals can we make communities strong. Belong Health. Kinder, more supportive care. This role is based is a field-based position in the Rochester, NY area. This role will require regular travel in/within the Rochester, NY local and regional area to service patients in their homes. SUMMARY The Field-Based Medical Assistant or Medical Technician will play a critical role in ensuring the health and well-being of our complex Medicare patients by assisting our mobile clinicians (Nurse Practitioners/Physician Assistants/Physicians) who are conducting comprehensive in-home assessments, identifying healthcare needs, and coordinating complex care plans. This role collaborates closely with a multidisciplinary team to improve health outcomes and enhance the quality of life for our members. Customer service skills are essential in this role. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Work under the direct supervision of the field-based clinicians, • Communicate with a healthcare provider via messaging, video conference, and mobile device., • Patient assessment and monitoring inclusive of vital signs, • Facilitate a physical exam using a mobile device and conduct other diagnostic tests and treatments as requested by virtual provider, as permitted by state law., • Work directly with point of care laboratory equipment including operation, calibration, and maintenance., • Perform EKGs., • Assist NP/PAs in the daily functions of a mobile care delivery., • Patient documentation., • Medical Assistant with a minimum of 2 years of clinical experience, • Fluency in English, • Proficient computer skills for electronic health record documentation., • Strong customer service, communication, and technological skills, • High School Diploma or GED equivalent is required. The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually quiet. Most of the work is done in patient homes and on a computer. This role requires the ability to walk up and down several flights of stairs easily and the ability to lift and carry equipment up to 30 pounds. TRAVEL This role will require regular travel. Ability and willingness to travel locally and/or regionally is required. A reliable vehicle and valid driver's license with clean driving record is required. SALARY $36,000 - $47,000 Belong Health is an equal opportunity employer and encourages all applicants from every background and life experience to apply. Our organization participates in E-Verify to confirm the eligibility of employees to work in the United States. (Nuestra organización participa en E-Verify para confirmar la elegibilidad de los empleados para trabajar en los Estados Unidos.)

Role Overview We are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. Job Duties: • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components), • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment., • Ability to achieve a high level of expertise to effectively troubleshooting and repair equipment, including root cause analysis., • Some experience or expertise in mechanical, piping, HVAC equipment and controls., • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc., • Calibrate, alignment and make adjustments with test equipment and measurement equipment., • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools, • Install upgrades to enhance or replace outdated control systems., • Execute preventive and predictive maintenance programs., • Data entry and report writing including ISO documentation., • Working knowledge of Microsoft Office and maintenance software tools., • Ability to change based on priorities\n\n Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all time., • Detail orientated Team Player, • Strong electrical and/or instrumentation training and demonstrated skills/experience, • Proficient in Math functions, • Must demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read/modify PLC programs to troubleshoot equipment problems, • Understanding of new electrical codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Good communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Team player - willing be flexible, often work in other areas and with other trades as needed., • Significant walking or other means of mobility., • Ability to work in a standing position for long periods of time (up to 8 hours)., • Ability to reach, bend, stoop, push and/or pull, and frequently lift up to 35 pounds and occasionally lift/move 40 pounds., • Ability to work off of ladders or scaffolding, in some awkward positions, • Indoor and outdoor work assignments, • The noise level in the work environment is usually moderate to loud., • Wears protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations.\n\n Qualifications: • HS diploma, and a 2-year degree or some level of instrumentation, electrical of demonstrated trade experience., • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate. \n\n EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $28.00 - $32.00 Experience Level: 5-10 Years Requisition ID: 1000

Role Overview As a key member of our growing team, the Quality Control Laboratory Analyst/Analytical Chemistry Technician will support a wide range of Quality Control and Quality Assurance activities. In addition to routine sampling and analytical testing, this position will assist in developing and improving laboratory procedures, supporting regulatory compliance and helping to maintain a robust Quality System. This is an onsite role in Rochester, New York. Specific Duties and Responsibilities: • Perform chemical and wet chemistry testing on raw materials, in-process samples and finished products., • Support the development and continuous improvement of procedures, SOPs and forms., • Assist in implementing and maintaining Quality Management System (QMS) components for a GMP-compliant environment., • Sample and inspect incoming raw materials and components., • Maintain clear and accurate documentation in laboratory notebooks or electronic systems, following Good Documentation Practices (GDP)., • Troubleshoot equipment and support preventative maintenance and calibration activities., • Participate in quality investigations, change controls, CAPAs, NCRs, audits and facility inspections., • Help manage and organize the laboratory space, supplies, waste and safety systems., • Assist in preparation of reports, data summaries and internal presentations., • Work closely with manufacturing, facilities, engineering and product development to promote a culture of quality across all functions. Qualifications (Education, Experiences and Skills): • Quality Control Laboratory Analyst/Technician -Bachelor's Degree in Chemistry, Engineering, or related technical field with 0-5 years of experience in a FDA/GMP regulated laboratory., • Knowledge of Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP), • Understanding of cleanroom behavior and gowning procedures in controlled environments, • Ability to work independently and collaboratively, • Strong documentation, organizational and communication skills, • Preferred: familiarity with laboratory equipment such as pH meter, balances, Osmolality and Conductivity meters. Experience with SAP/LIMS (Laboratory Information Management Systems). Physical Requirements: • Fifty (50) pound lifting, carry, push, pull, or otherwise move objects., • Ability to climb a platform/ladder., • Ability to stand/walk for long periods of time. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $27.00 - $30.00 Experience Level: 0-5 Years Requisition ID: 1642

Role Overview We are looking for an Electrical and Instrumentation Mechanic to Support our Advanced Material & Chemicals division in Rochester, NY. As an Electrical and Instrumentation Mechanic you will be responsible for the following job functions: • Electrician & Instrumentation skilled trade service to provide multi-discipline capability to repair, maintain, install and make improvements on film manufacturing equipment, complex processing equipment, chemical processing equipment, building general systems (includes instrumentation, pneumatics, hydraulics, controls (PLC's & distributed control systems (DCS), and a wide range of electrical components), • Ability to calibrate process control instruments tight tolerances using sophisticated calibration equipment., • Ability to achieve a high level of expertise to effectively troubleshoot and repair equipment, including root cause analysis., • Some experience or expertise in mechanical, piping, HVAC equipment and controls., • Includes maintenance of motors, breakers, starters, variable speed drives, process controls devices, heat tracing, lighting, etc., • Calibrate, align and make adjustments with test equipment and measurement equipment., • Installation of conduit, wiring, switches, relays, lighting, circuit breakers using power tools and hand tools, • Install upgrades to enhance or replace outdated control systems., • Execute preventive and predictive maintenance programs., • Data entry and report writing including ISO documentation., • Working knowledge of Microsoft Office and maintenance software tools., • Ability to change based on priorities Requirements: • Dependable, maintain good attendance, • Maintain a clean work area and operate in a safe manner at all times., • Detail orientated Team Player, • Strong electrical and/or instrumentation training and demonstrated skills/experience, • Must demonstrate effective analytical troubleshooting skills, • Able to read electrical, instrument and machine drawings, • Able to read/modify PLC programs to troubleshoot equipment problems, • Understanding of new electrical codes for hazardous environments (flammable liquids), • Ability to work effectively with minimal supervision, • Excellent safety record - places safety and environment as top priority in all work, • Knowledge of Lock Out / Tag Out, • Effective communication skills - daily communications with leaders, maintenance planner, technical staff, engineering and operations as needed., • Significant walking or other means of mobility., • Ability to work in a standing position for extended periods of time (up to 8 hours)., • Ability to work off of ladders or scaffolding, in some awkward positions, • Indoor and outdoor work assignments, • Wear protective clothing and/or Personal Protective Equipment required by the work environment or governmental regulations. Qualifications: • HS diploma, and a 2-year degree or some level of instrumentation, electrical or demonstrated trade experience., • Varying schedule to include evenings, holidays, weekends and extended hours as business needs dictate. EOE Policy Statement: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Estimated Salary: $30.00 - $36.00 Experience Level: 0-5 Years Requisition ID: 1567

Job Description About NYNE NYNE Mechanical, a division of NECI, is a team of talented problem solvers who can see beyond the immediate effect of a breakdown to the root cause. Our entrepreneurial culture encourages and rewards those who can think like our clients and make recommendations to improve their uptime performance. Here’s What You’ll Get • Highly competitive Medical, Dental, and Vision Insurance, • Flexible Spending or Health Savings Accounts, • Accrued Vacation Time, • 10 Paid Holidays, • 12 Paid Weeks Maternity Leave, • Pet Insurance, • Retirement Savings: 401(k) and Employee Stock Ownership Plan, • Employee Referral Bonus, • Professional Development Reimbursement, • Perform in-field and in-shop valve repairs to ASME/NBIC standards, • Diagnose issues and execute repairs using machining, welding, or parts replacement, • Use calibration and flow testing equipment, • Document work accurately in real-time, • Valve repair experience (PRVs/SRVs, actuators, isolation valves), • Mechanical aptitude and strong problem-solving skills, • Willingness to travel, work overtime, and adapt to changing field needs, • Ability to lift up to 50 lbs and work in physically demanding environments Must be currently authorized to work in the United States. Policy on Third-Party Unsolicited Resume Submissions:?Please note that any third-party unsolicited resume submissions will immediately become the property of NECI. NECI will not pay any fee to a submitting employment agency, person, or entity unless a signed agreement is established. Please Note:?NECI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, protected veteran status or any other characteristic protected by law.

Job Description Title Optical Assembly Manager Department Assembly Reports to Director of Operations SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: We are seeking a seasoned and driven Production Manager to lead our Optical Assembly operations and support broader manufacturing initiatives across the company. This role demands a hands-on leader who thrives in a fast-paced, precision-driven environment and is passionate about building high-performing teams, optimizing production workflows, and delivering exceptional results. As a key member of our management team, you will be responsible for aligning daily operations with strategic business goals, ensuring consistent quality and on-time delivery, and fostering a culture of safety, accountability, and continuous improvement. You’ll play a critical role in shaping our production capabilities, driving operational excellence, and supporting long-term growth. You Will: • Lead daily operations of the Optical Assembly department, ensuring consistent delivery of high-quality products on time and within budget., • Monitor performance metrics and implement corrective actions to meet delivery, cost, and quality targets., • Maintain a clean, organized, and showcase-ready production environment for internal and external stakeholders., • Collaborate with senior leadership to develop and execute long-term manufacturing strategies that align with company goals., • Champion a culture of safety, equity, and continuous improvement across all production areas., • Identify and pursue growth opportunities through customer alignment, market analysis, and technology trends., • Oversee equipment maintenance, calibration schedules, and capital investment planning., • Ensure optimal utilization of space, utilities, and resources in collaboration with Facilities and Finance teams., • Recruit, train, and retain top-tier assembly and test personnel., • Foster a high-performance culture through clear expectations, coaching, and performance management., • Ensure compliance with HR policies, safety protocols, and operational procedures. You Have: • Bachelor’s degree in engineering, Optics, Manufacturing, or a related technical field (master’s preferred), • Minimum 10 years of progressive leadership experience in a high-precision manufacturing environment, ideally with a focus on optical assembly and test., • Proven ability to lead and inspire cross-functional teams, driving accountability, engagement, and continuous improvement., • Demonstrated success in managing complex production workflows, balancing quality, cost, and delivery in a fast-paced setting., • Strong understanding of lean manufacturing principles, Six Sigma, or other process improvement methodologies., • Experience with capacity planning, resource allocation, and capital investment strategy., • Skilled in data-driven decision-making, using metrics to guide performance and identify opportunities., • Exceptional communication and interpersonal skills, with the ability to collaborate across departments and influence at all levels., • Adept at navigating change, solving problems under pressure, and adapting to evolving customer and market demands., • Commitment to building a safe, inclusive, and high-performance culture. You are: • Results-Oriented: Motivated, hard-working and ready to level-up, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge, • Process Oriented: Well organized, demonstrating attention to detail, • Analytical: Possess an “If there’s a problem, I’ll find a solution” attitude, • Accountable: Demanding the highest quality from yourself and team members, • Detail-Oriented: Have excellent time management and organizational skills, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • Culture: An energetic, value-driven team where you will experience the reward of meaningful work! Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to use hands and fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally, works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and may require area specific safety training., • This position works in a manufacturing environment. The noise level in the work environment is usually loud. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Department: Grounds Reports To: Director of Agronomy and E/W Superintendent Position Location: Rochester, NY Status: Seasonal Duration: Spring 2026 - Flexible start and end dates to accommodate school schedules/calendar. The Club: Oak Hill Country Club is a 36-hole facility located in Rochester NY. Both championship courses are designed by storied architect Donald Ross. The East Course is consistently ranked as a top 25 course in the country and known as one of the greatest venues for championship golf. With the success of the 2023 PGA Championship, Oak Hill has been selected to host the 2027 U.S. Amateur on both courses. The Oak Hill team is looking to fill intern positions for the summer of 2026. Grounds Intern Position Summary: Oak Hill seeks students who want to take their career and passion for turf management to the next level. Interns who are willing to learn and dedicate their time to our program will gain the skills and knowledge of turf management at the highest level. We pride ourselves on teamwork, embracing our motto "Be the Best," delivering championship conditions daily for our membership. We are looking to grow our team and mentor young turf professionals who will one day become successful superintendents nationwide using the knowledge they've gained through our program. Our team places a strong emphasis on promoting from within our organization. All our current assistants were once student interns who returned after graduating and have climbed the ladder within our ranks. In the past 20 years, 11 Superintendents have been placed across the country and have climbed the ranks of the organization. They have all moved into their own superintendent roles. Specific Duties: Individuals selected will have ample opportunities to advance their education at Oak Hill. Students who possess a great work ethic, a positive attitude, and the ability to work as team players will gain substantial experience not limited to: • Under the guidance of the Golf & Grounds leadership team, participate in the planning, execution, and follow-up of all agronomic practices., • Assist in all aspects of maintaining championship-level golf courses., • Water management., • Experience-based knowledge of how we manage both USGA Bent grass greens and Poa/Bent push-up greens., • Calibration, chemical, and fertilizer application. (Spray Hawking, Boom Spraying)., • Irrigation Troubleshooting and repair., • Candidate must possess a positive attitude, strong work ethic, attention to detail, eagerness to learn, and organizational skills., • High integrity, strong people skills, and effective communication skills., • Innovative thinker and self-starter with perseverance to work on a team to succeed., • Must have the ability to be present and active on the golf course for a minimum of 10 hrs per day., • Must be able to continuously stand, walk, and/or sit for a minimum of 8 hours., • Must be able to bend, kneel, push, and pull over the course of a shift., • Will be required to perform job functions outdoors and be exposed to sun, cold, heat, humidity, and other elements., • Must be able to work a flexible shift that includes early mornings, nights, weekends, holidays, split shifts, and extended shifts., • Must be 18 years of age., • Must have a reliable form of transportation to and from work., • Must be able to operate golf course/grounds-related equipment., • Ability to read, write, and communicate effectively in English, both written and oral., • Off-site housing will be provided., • Opportunity for intern swap with other high-caliber clubs., • Uniforms provided., • Golf shop discount., • Golf privileges., • Overtime available., • Opportunity for advancement within the organization.

Job Description We are currently seeking Field Service Technicians in the Rochester, NY area. Field Service Technicians are responsible for providing fueling facility maintenance, repairs, installations and regulatory compliance inspections. This position requires a wide variety of skills and experiences in plumbing, electrical and electronic systems. (Fuel management systems & fueling equipment include; fuel dispensers, fuel hoses, fuel nozzles, fuel pumps, fuel tank gauges & alarms, fuel valves & fittings, fuel monitoring system, tank monitoring system, meter calibration, etc.) Duties • Troubleshoot, repair, inspect, maintain, and install fuel management systems and fueling equipment located at our client’s fueling facilities, • Assemble, install and repair petroleum bulk storage tanks and piping systems, • Remove, replace and repair electrical wiring, alarms and sensors of Veeder Root/TLS-450/Omntec/Proteus/Fuel & Tank monitoring system, • Perform on-site compliance inspections and testing of Automatic Tank Gauging Systems, Line Leak Detection and Testing, Aboveground and Underground Storage Tank Testing and Functionality Testing, • Perform preventative maintenance on equipment and respond to emergency calls to complete service requests in a timely manner and ensure all requests are handled in a professional manner, • Comprehend customer requirements and assist in diagnosis, analysis and make appropriate recommendations, with excellent work ethic, • Work safely in accordance with OSHA Standards, • Follow company’s procedures and protocols, • 3+ years’ experience as Field Service Technician-Fueling Systems for plumbing, or electrical industries, • High school diploma or equivalency, • Basic computer skills; knowledge in networking and familiar with mobile tools and applications, • Strong background on heavy mechanics, electrical systems, Veederoot, Omntec/Proteus, Wayne Dispenser and Gasboy, • Good mechanical aptitude; able to use hand tools., • Must have a valid and clean driver license, • Professionalism, • Problem-solving ability, • Excellent communications skills, ability to establish reports, project a professional tone and provide clear concise information, • Ability to lead without constant supervision, a self-starter and self-motivated, • Must read, write, speak and understand English with exceptional analytical, communication and interaction skills, • Willing to work overtime and on call emergency and some out of town work, • 40 Hr. HAZWOPER certification is preferred Salary Range: $22 - $30 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Olaro is seeking a travel Cath Lab Technologist for a travel job in Rochester, New York.Job Description & Requirements.Pay package is based on 10 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined.Posted job title: SMH Allied Cath Lab Tech.For o

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Schedule: Full time Availability: Applying To This Requisition Allows You To Be Considered For Multiple Opportunities.Please Provide As Much Availability That Works With Your Schedule.Age Requirement: Must be 18 years or older Location: Rochester, NY Address: 1500 Brooks Ave Pay: $20.Job Posting: 10

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Schedule: Full time Availability: Applying To This Requisition Allows You To Be Considered For Multiple Opportunities.Please Provide As Much Availability That Works With Your Schedule.Age Requirement: Must be 18 years or older Location: Rochester, NY Address: 1500 Brooks Ave Pay: $20.Job Posting: 10

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Olaro is seeking a travel Cath Lab Technologist for a travel job in Rochester, New York.Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: 11/03/2025 Duration: 13 weeks 36 hours per week Shift: 10 hours Employment Type: Travel PHP Job I

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Take your CDL-A career further! Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading p