Trabajos calibration en New Rochelle, New YorkCrear alertas

Job Description \n \n Performs patient care under the physician's/nurse's direct supervision. Duties include preparing patient for physician, administering, obtaining and recording diagnostic laboratory test results. Assists in coordinating organization of care to meet patient needs including preparing, organizing and filing reports into the medical record. \n Job Responsibility \n \n 1.Collaborates with members of the health care team in coordinating and implementing plans for patient care; may record reason for visit and related patient information for practitioner review. \n 2.Performs vital signs, height, weight, and screening procedures which may include head circumference, audiometry, and vision testing; documents findings in the medical record. \n 3.Collects and assists providers in collection of specimens, as required, using appropriate protocols such as infection control; completes requisitions, labels and routes specimens according to standard procedure. \n 4.Performs and documents daily controls and calibration of laboratory equipment when needed; informs the supervisor of when inaccurate controls are noted. \n 5.Performs electrocardiograms and phlebotomy in accordance with provider orders; adheres to infection control standards including, but not limited to, hand hygiene, use of PPE, isolation of patient with known infectious disease, and equipment disinfection/sterilization. \n 6.Assists physicians and nurses with special procedures and examinations including, but not limited to lumbar puncture, pelvic exam, etc. following appropriate protocols such as infection control, universal protocol, and patient identification; secures supplies, ensures patient is properly undressed and draped, provides instruments to physicians, holds patient, as required and assists patient after procedure/examination.7.Maintains orderliness and cleanliness of examination rooms; stocks assigned rooms and cupboards and ensures par levels of supplies are maintained; checks and completes required logs and equipment including refrigerator logs, eyewash logs, sample medications, AED, suction and other required checks.8.May participate in pre-visit chart preparation by ensuring required lab results and documentation are available in the medical record for practitioner review (for practices using paper medical records).9.Performs variety of other clerical functions such as filing of paper medical records, processing insurance forms, preparing financial records, photocopying, answering phones, and assuring efficient flow of patients through the suite, etc. Performs related duties as required.10.All responsibilities noted here are considered essential functions of the job under the Americans with Disabilities Act. Duties not mentioned here, but considered related are not essential functions. \n Job Qualification \n \n -High school diploma or equivalent, required \n •Completion of a Medical Assistant training program with certificate OR 1- 3 years experience as a medical assistant, emergency medical technician or certified nursing attendant ( with valid certificate) OR Successful completion of the Northwell Health Medical Assistant training program \n *Additional Salary Detail \n The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future.When determining a team member's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, service line, years of relevant experience, education, credentials, negotiated contracts, budget and internal equity).

Duration: 9 Months Job Description: • We're looking for an experienced Customer Experience Associate Manager to scale and optimize our multi-channel support operations and ensure we’re delivering world-class service to our digital subscription customers., • The ideal candidate has at least 3+ years of experience successfully growing and coaching support teams in fast-paced, collaborative environments., • This role requires strong operational and communication skills, a deep understanding of customer support tools and platforms, and a passion for solving problems., • The Associate Manager must be a tenacious and analytical thinker, eager to dive into complex issues and drive impactful improvements in support delivery and customer satisfaction. This position reports to the Director of Customer Experience. Responsibilities: • Lead Day-to-Day Support Operations: Manage frontline operations across multiple contact channels. Monitor KPIs, quality assurance, and coach team members to improve performance and customer outcomes., • Oversee Offshore Support Team: Manage daily execution of support by our offshore partners, including staffing, scheduling, and escalation handling. Conduct weekly calibration sessions and maintain alignment with business goals., • Train Support Team: Create clear, effective training materials and lead training sessions for both new team members and existing agents needing refresher support., • Prioritize and Manage Team Workflows: Collaborate with the CX Director to set clear priorities for the support team. Ensure the most urgent and impactful work is being addressed while helping the team balance daily tasks, project work, and time-sensitive issues., • Drive Cross-Functional Alignment: Partner with Product, Marketing, Engineering, and other internal teams to stay up-to-date on digital product enhancements and roadmap changes. Ensure changes are accurately reflected in support documentation, scripts, and training materials., • Translate and Advocate: Act as a liaison between Customers and technical/product teams. Clearly articulate customer pain points and advocate for the customer by “translating” complex issues and solutions into understandable, actionable insights., • Identify and Solve Root Issues: Analyze support trends, uncover systemic issues, and “connect the dots” to identify areas of friction for customers. Present compelling narratives to internal stakeholders about why these issues matter and how to fix them., • Maintain and Improve Support Content: Own the creation, maintenance, and optimization of internal and customer-facing knowledge base articles, macros, and FAQs to ensure CX agents have timely and accurate resources., • Monitor and QA Communication Channels: Oversee real-time ticket/chat queues to ensure SLAs are met, tone and content of interactions are on-brand, and agents are resolving issues with clarity and empathy., • Drive Process Improvements Through Data: Review ticket trends, chat transcripts, feedback forms, and behavioral data to surface actionable insights. Recommend updates to scripts, training, and workflows that improve customer satisfaction and team efficiency., • Champion Tool Adoption and Training: Stay up to speed on CX platforms and tools. Design and lead structured training programs to onboard agents to new features/tools and ensure they’re confident and successful., • “Dogfood” Our Products: Proactively test and explore our digital products as a customer would. Surface UX or journey issues and collaborate with product teams to address them., • Collaborate Across CX Ops: Partner closely with the CX Operations Manager to ensure aligned priorities, leverage shared tools, and coordinate cross-functional initiatives., • Note: All new CX team members are expected to work as full-time support agents for the first 3 months to develop deep empathy for our customers and frontline team. Experience: • 3+ years of experience training and managing customer support agents in a digital business, • Proven ability to help teams and individuals prioritize tasks in a dynamic environment, • 1+ year experience working with virtual assistant/chatbot tools, including content design and conversational flow building, • Excellent written and verbal communication skills, • Strong organizational and time-management skills, • Analytical mindset with attention to detail and a bias toward action, • Curious and adaptable, with a willingness to explore and test new technologies, • Passionate about solving customer problems and improving CX operations Skillsets: • High school About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ___ US Tech Solutions is an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Internal Job ID: 26-05530 Recruiter Name: Sangeeta Contact: 201-932-1363

Job Locations US-NY-Rye Job ID 2026-8244 Category Technician Minimum Rate USD $160,000.00/Yr. Maximum Rate USD $170,000.00/Yr. Work Location Type Physical The Associate Director oversees the daily operations of a cellular therapy laboratory operations of cellular therapy, ensuring quality, compliance and efficacy in the processing, cryopreservation, storage, and distribution of cellular therapy products. This includes staff management, training, quality assurance, and adherence to regulatory requirements. The Associate Director with work closely with the Cell Therapies Lab Director in creating standard operating procedures (SOPs), project management, resource management, including personnel, have oversight of project budgets and fee schedules, performance of experimental work, development and implementation of experimental protocols, workflow, and supervision of staff, as well as additional duties as required. This individual will work closely with leadership of corresponding cGMP and other CCS laboratory teams, as well as clinical apheresis services, business development and others as necessary. The director is expected to understand and be aware of the trends of the clients and service portfolios under the prevue of this position and help to foster relationships. This individual will be expected to participate in client meetings, off-site activities/events, and meetings. Tracking of projects timelines and trending data will be required. Supervising day-to-day lab technical activities, ensuring smooth workflows, and managing resources (personnel, equipment, supplies). • Implement and maintain quality control and quality assurance systems, validating new procedures, and ensuring compliance with regulatory standards like FACT, CLIA, and FDA., • Manage, train and supervise laboratory personnel, including performance evaluation and competency assessments., • Ensure adherence to all applicable regulations, including those related to safety, patient confidentiality and product handling., • Oversee the inventory of supplies and reagents, equipment maintenance and calibration, and ensuring proper documentation in collaboration with the assets and materials management team., • Provide technical guidance to staff, troubleshoot equipment issues, and participate in process validation and optimization., • Communicate effectively with clinical teams, Medical and Laboratory Directors, ensure proper information flow and problem resolution., • Assist the Lab Director on identifying areas for process improvement, develop and implement new procedures and contributing to the continuous improvement of laboratory operations., • Ensure projects are completed in a timely fashion., • Oversee new products and services., • Participate in initiatives that increase visibility and grow new business, including conferences, publications, and other types of outreach., • Evaluate new and emerging technologies and makes recommendations bases on these evaluations., • Identify and implement quality indicators and provides regular reports on the status of these indicators., • Provide effective customer service by partnering with internal business units to resolve customer issues., • Work as an individual or on a team for assigned special projects., • Make recommendations for improvement of practices in assigned business units., • Attend professional development seminars, conferences and meetings as required., • Meet NYSDOH requirements for Stem Cell Laboratory Director., • Certificate of Qualification for Flow Cytometry preferred, • Expert knowledge in practices and procedures in cellular therapy, flow cytometry, processing., • Cultural competency and the ability to communicate effectively in a culturally sensitive manner with both individuals and groups from diverse backgrounds., • High level of interpersonal skills to handle a variety of complex issues and situations. Position requires demonstrated poise, tact and diplomacy in dealing with a variety of staff up to and including executive leadership., • Ability to conduct research on various topics., • Ability to work independently with minimal supervision., • Ability to communicate clearly and with authority, both in writing and verbally, to others in one-on-one or small group settings., • Ability to interact with individuals at all levels of the organization and customers in a helpful, courteous and friendly manner while demonstrating sensitivity to and respect for diverse populations., • Ability to work in a strong team environment., • Ability to plan and organize job tasks or resources in an efficient manner., • Ability to be responsive and available to management in order to address issues and concerns as they arise., • Ability to work in a fast-paced environment with demonstrated ability to juggle multiple competing tasks and demands., • Ability to use logic and reasoning to identify and analyze the strengths and weaknesses of alternative solutions, conclusions or approaches to problems within established policies and procedures., • Ability to identify complex problems in a timely manner, decipher information to develop and evaluate options and implement solutions. For applicants who will perform this position in New York City or Westchester County, the proposed annual salary is $160,000.00p/yr. to $170,000.00p/yr. For applicants who will perform this position outside of New York City or Westchester County, salary will reflect local market rates and be commensurate with the applicant's skills, job-related knowledge, and experience. Founded in 1964, New York Blood Center (NYBC) has served the tri-state area for more than 60 years, delivering 500,000 lifesaving blood products annually to 150+ hospitals, EMS and healthcare partners. NYBC is part of New York Blood Center Enterprises (NYBCe), which spans 17+ states and delivers one million blood products to 400+ U.S. hospitals annually. NYBCe additionally delivers cellular therapies, specialty pharmacy, and medical services to 200+ research, academic and biopharmaceutical organizations. NYBCe's Lindsley F. Kimball Research Institute is a leader in hematology and transfusion medicine research, dedicated to the study, prevention, treatment and cure of bloodborne and blood-related diseases. NYBC serves as a vital community lifeline dedicated to helping patients and advancing global public health. To learn more, visit nybc.org. Connect with us on Facebook, X, Instagram, and LinkedIn.

Duties include preparing patient for physician, administering, obtaining and recording diagnostic laboratory test results. Performs and documents daily controls and calibration of laboratory equipment when needed; informs the supervisor of when inaccurate controls are noted. Completion of a Medical

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks — including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel — with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description Location: Option of Fully Remote or Hybrid (Orlando, FL; New York, NY or Englewood Cliffs, NJ) Business: VERSANT | Supporting Tech & Ops / News / Corporate Functions Reports to: Head of Talent Acquisition What You’ll Do As a Contract Recruiter, you will lead full-cycle recruitment for your respective area(s): tech & ops, news and/or corporate functions. You’ll partner closely with hiring managers, HRBPs, and stakeholders to shape talent strategies that align with business goals and foster a diverse, innovative, and high-performing workforce. Key Responsibilities: • End-to-End Recruitment Ownership - Manage the full lifecycle recruiting process for tech & ops (across engineering, product, data and related tech roles), news (options producers and reporters, data journalists, producers/writers – prediction markets, equity analysts) and/or corporate function roles (finance, communications, digital, marketing roles) - from intake through offer., • Strategic Talent Consulting - Partner with business leaders and HR to understand team objectives and build tailored, data-driven recruitment strategies., • Candidate Sourcing & Engagement - Develop and execute sourcing plans using a variety of channels (LinkedIn, GitHub, events, local colleges/universities, etc.) to attract top candidates. Build and maintain strong talent pipelines., • Stakeholder Partnership - Serve as a trusted advisor to hiring managers, providing market insights, calibration, interview coaching, and support throughout the hiring process., • TA Innovation & Projects - Contribute to broader TA projects such as improving candidate experience, enhancing recruitment tech, and refining inclusive hiring practices., • Market Intelligence & Reporting - Leverage talent analytics and industry trends to guide recruiting decisions and influence hiring strategies., • Brand & Culture Ambassadorship - Represent VERSANT at recruiting and industry events, conferences, and networking meetups to promote our employer brand and culture.Qualifications Basic Qualifications Required: • 5+ years of full-cycle, in-house recruitment experience, with a strong track record of quality hires in any of the following domains: tech & ops, news or corporate functions, • Proven experience hiring in dynamic, high-growth environments. Agile, entrepreneurial mindset - thrives in ambiguity and “build” environments, • Experience influencing and partnering with senior business leaders and HRBPs. Strong communication, consulting, and organizational skills, • Excellent sourcing skills using tools like LinkedIn Recruiter, Boolean search, and social recruiting platforms, • Experience contributing to TA branding, candidate experience, or recruitment process improvements, • Proficiency in ATS systems and recruiting analytics/reporting, • Must have unrestricted work authorization to work in the U.S., • Sweat it out -- Free onsite fitness center with state-of-the-art equipment, plus daily group classes, • Eat up -- Gourmet cafeteria with daily specials plus soup and salad bars, • Extras -- Dry cleaning, shoe shining and sneak peeks, • Don’t have a car? No problem! We offer free shuttle transportation to and from multiple locations in Manhattan, Brooklyn, Hoboken and Jersey City Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to . VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionNEW YORK METRO AREA Established in 1978, Digital Media Systems, Inc. (DMS) is a recognized leader providing best-in-class audiovisual solutions to the motion picture, post-production, distribution, and broadcast fields. Position OverviewThe commercial Cinema Technician is a full-time position that directly supports our efforts to provide world-class service to our wide range of clients, including commercial and independent theater owners, private and corporate screening rooms, post-production facilities, universities, museums, and more. With a focus on cinema, you’ll work with a passionate and talented group of field technicians and installers to take commercial AV projects from concept to creation, and subsequently operate and maintain those systems, once in place. This is a permanent, full-time, benefited position. Job Responsibilities • Identify and diagnose audiovisual presentation issues and equipment failures., • Provide remote and onsite support/troubleshooting assistance and guide non-technical theater and venue staff, communicating step-by-step instructions in understandable terms., • Complete routine and emergency onsite equipment service and preventative maintenance, including but not limited to equipment installation, consumable and part replacement, deep cleaning of projection system and optics, and device firmware updates and backups., • Perform routine calibration of video/imaging and audio equipment, including but not limited to image luminance/color calibration, image geometry/focus adjustment, graphic equalization, synchronization, and SPL measurement of audio channels., • Ensure the highest industry presentation quality standards are met at high profile film premieres, screenings, and other special events., • Daily travel throughout the New York metro area and occasionally out of town/out of state.Mandatory Qualifications, • Read, interpret, diagnose and affect repair of semi complex electronic equipment, e.g. printed circuit boards, power supplies, multiplexing systems, amplifiers, etc., • Provide technical guidance and training for above to other technicians., • Printed Circuit Board (PCB) / Electronics Repair SkillsMinimum Qualifications, • 3+ years’ experience operating/servicing professional audiovisual equipment., • Comprehension of AV system schematics, signal flow, and modern audio and video formats., • Experience with AV and electrical test equipment, including but not limited to: light meters, colorimeters/spectroradiometers, oscilloscopes, real-time analyzers (RTA), SPL meters, signal generators, and multimeters., • Demonstrate modern computing skills, including experience with Windows and macOS, and competencies in word processing, spreadsheets, data entry, and research., • Experience configuring and troubleshooting basic wired and wireless networks., • Excellent verbal and written communication skills., • Ability to work diligently, calmly, and professionally, under tight run-of-show deadlines., • Valid driver’s license and reliable transportation., • Flexibility in scheduling with a willingness to work nights, weekends, and holidays (paid) depending on business needs., • Ability to engage in physical activity, including lifting (up to 50lbs), standing for long periods, walking up and down stairs, and climbing ladders/scaffolding., • Must be authorized to work in the United States.Preferred Qualifications, • Knowledge and proficiency with commercial Digital Cinema equipment, including Christie, Barco, NEC, Sony, Dolby/Doremi, GDC, QSC/USL, etc., • Experience with DSP systems, audio over IP, and other distributed audio systems such as Q-SYS/Q-LAN, AES67, Dante, etc., • Understanding of control systems, such as Q-SYS, Crestron, Extron, AMX, etc, and third-party control methods and equipment such as electrical relays/switches, contact closure, GPIO, and TCP/UDP IP control., • Experience with commercial digital signage systems and LED walls., • Ability to solder and terminate cables and connectors., • CTS and related professional certifications.We Offer, • Starting salary: $70,000-$95,000+/year, commensurate with experience., • Additional compensation: annual bonus based on performance., • Benefits: Health insurance, 401K, PTO in addition to sick days and paid holidays., • 401(k), • Bonus based on performance, • Health insurance, • Opportunity for advancement, • Paid time off Digital Media Systems, Inc. is an equal opportunity employer. We value diversity and encourage applications from all qualified candidates. Only shortlisted candidates will be contacted for interviews. Join us to lead with impact and help shape the future of Digital Media Systems, Inc. About Us Digital Media Systems, Inc. is a leading provider of audio-visual solutions for the motion picture industry. We have represented the high-profile interests of Hollywood film studios, postproduction, and cinema exhibition facilities, as well as industry defining product manufacturers. Our goal is to provide superior products, technologies, support, and services to the entertainment industry in an efficient and comprehensive manor. Visit us at for more information about our company and offerings.

Job Description Join the country’s leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology – all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a Nuclear Medicine Technologist who is up for the challenge. Summary/Objective: The Nuclear Medicine Technologist prepares, administers and measures radioactive isotopes in diagnostic cardiac studies using a variety of radioisotope equipment. The Nuclear Medicine Technologist is responsible for preparing stock solutions of radioactive materials and calculating doses to be administered by cardiologists. Essential Functions: • Administers radiopharmaceuticals intravenously to detect or treat cardiac related diseases, using radioisotope equipment, under direction of a cardiologist., • Calculates, measures and records radiation dosage or radiopharmaceuticals received, used, and disposed, using computer and following physician’s prescription., • Ensures and maintains quality control in regard to patient care and equipment usage., • Performs quality control checks on laboratory equipment, meters, and/or cameras, log into system, follow appropriate procedures for addressing and documenting issues., • Maintains and calibrates radioisotope and laboratory equipment; send out for calibration as needed, • Disposes of radioactive materials and stores radiopharmaceuticals, following radiation safety procedures., • Processes cardiac function studies, using computer., • Prepares radiopharmaceuticals, adhering to safety standards that minimize radiation exposure to workers and patients., • Records and processes results of procedures., • Explains test procedures and safety precautions to patients and provide them with assistance during test procedures., • Complete system/document backup at end of each scan day, • Document monthly supply inventory and submit to Corporate, • Meet with RSO quarterly, • Inventory and submit supply lists in a timely manner, • Communicates all issues to provider, Supervisor, and Corporate Office, • Ensure mobile unit is clean and orderly, all staff is appropriately attired and wearing personal dosimeter(s), • Ensure all signage, licenses, Chemtrec, and ACR related documentation is up to date, received, signed and/or filed; ensure all paperwork is printed and available for monthly inspections, • Performs other related duties as required and assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to move independently and comfortably on board mobile unit. Must be able to lift 30 lbs. and be able to push/pull mobile equipment weighing up to 300 lbs. Must be able to stand for prolonged periods of time. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job . • Physical activity – talking, hearing, grasping, fingering, and repetitive motion., • Medium work – Must be able to lift 30 pounds and be able to pull/pull mobile equipment weighing up to 300 lbs. Must be able to stand for prolonged periods of time., • Associate’s Degree in Nuclear Medicine from an approved program, • Certification by the Nuclear Medicine Technology Certification Board (NMTCB) or certification by the American Registry of Radiologic Technologists (ARRT) and state certification, as applicable; applicable certification is required and must be maintained, • Basic Life Support (BLS) certification is required and must be maintained, • Nuclear Cardiology experience preferred, • Microsoft Office (Word, Excel, Outlook and PowerPoint) and Practice Management Systems experience, • Ability to work cooperatively with others in a professional manner and in a team-oriented environment, • Ability to communicate verbally and in writing, • Strong problem-solving skills, • Approachable and confident bedside manner, • Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner, • Travel required within the New York and New Jersey Benefits: We believe taking care of our people is the right thing to do. Cardiac Imaging believes that its dedicated employees are its most valuable resource. Employees at Cardiac Imaging are provided with a professional and comfortable work environment, along with a generous benefit package. • Paid Holidays, • Paid Time Off, • Medical/Dental/Vision Insurance, • Flexible Spending Account (FSA), • Healthcare Savings Account (HSA), • Voluntary Short-Term Disability, • Long Term Disability, • Life Insurance/AD&D, • Parental Leave, • Voluntary Life Insurance/AD&D, • Voluntary Accident, • 401(k), • Career Growth and opportunities for advancement, • Cardiac Imaging is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Cardiac Imaging is a drug-free workplace and uses E-Verify to confirm the identity and employment eligibility of all new hires., • Employer reserves the right to offer the selected candidate or applicant an hourly rate or salary at an appropriate level to be set and determined by the employer that is commensurate with the applicant’s qualifications, experience, education, skills, training, certifications, or seniority

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description Position Title: CT Technologist – Contract Location: Brooklyn, New York Contract Duration: 13 Weeks Compensation: * Total Weekly Gross: $1,922.50 Work Schedule * Hours per Week: 22.5 * Shift Length: 7.5 hours * Days per Week: 3 Position Overview "Navitas Healthcare, LLC" is seeking a skilled CT Technologist to perform high-quality diagnostic imaging procedures while ensuring patient safety and adherence to established radiology standards. This role involves operating CT equipment, administering contrast/radiopharmaceuticals, and maintaining strict quality and safety protocols in a fast-paced clinical environment. Key Responsibilities * Perform CT imaging using appropriate technical parameters (kV, mA) to ensure image quality * Conduct daily quality control and calibration checks on CT equipment * Administer contrast agents and radiopharmaceuticals per physician orders and protocols * Maintain accurate documentation including logs, manuals, and charge records * Identify and report equipment issues in compliance with regulatory standards * Perform quality assurance and safety testing procedures * Follow radiation safety guidelines in accordance with ALARA principles * Manage patient imaging data for radiologist interpretation * Order, receive, and verify radiopharmaceutical doses per protocol * Confirm dosage activity levels prior to administration Required Qualifications * Active New York State License (L.R.T) * ARRT Certification in Radiography and CT (current) * Current BLS Certification * 1–2 years of recent CT experience * Graduate of an accredited Radiologic Technologist program * Strong English communication skills (written and verbal) Education * Associate’s or higher degree in Radiologic Technology (required) For more details contact at or Call / Text at 516-862-1169. About Navitas Healthcare, LLC certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job Description EAM-Mosca Corp., Hazle Township PA, a dynamic market leader in the area of end-of-line automated packaging machinery and consumable strapping solutions, is seeking a driven Field Service Technician for the New York region. EAM-Mosca is privately held and retains a unique, focused, entrepreneurial culture. EAM-Mosca also enjoys a blue-chip client base of highly successful North and South American manufacturing companies and has a portfolio of products applicable to a variety of end-use markets. The key to the ongoing success of the business is a system-based product portfolio featuring standard as well as custom engineered packaging machinery solutions and a superior consumable packaging product, complimented by quality technical service and readily available aftersales parts support. The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. The Field service techs responsibilities include: • Install, Commission, equipment in a manner that ensures reliability and high customer satisfaction., • Perform preventative maintenance, Predictive Maintenance, Emergency repair on all EAM equipment., • Troubleshoot mechanical and electrical systems utilizing systematic thinking while employing test equipment and hand tools to discover faults and develop plans to report, plan and execute the planned solution., • Ability to work closely with Mosca Engineering to provide the highest level of customer service., • Generate service reports that explain the work provided, parts provided and clear understanding of the issue, the solution, and any follow up needed. All done in a timely and professional manner., • Communicate daily with the area service managers and develop schedules and travel itineraries that meet the needs of our customers and provide ample time to preform the work requested., • Advance understanding of machines and their systems to include but not limited to pneumatic, hydraulic, bearings, levers, channels, pulleys, cams, and camshafts, • Basic experience with Control systems utilizing Allen Bradley, Siemens and B&R PLC’s, • Electromechanical experience with conveyance systems, understanding sensors, electric motors and how they interact., • Able to use a multimeter, perform point to point, read electrical schematics and trace, • Able to use and read Calipers micrometers., • Able to take initiative and work independently on a regular basis, • Able to communicate clearly and professionally through both written and verbal medias: Web based service reporting, Video conferencing and face to face interactions., • Able to travel extensively within the U.S. Monday thru Friday. (80%) Team, Training and Support • In-house training with continuous on the job field training with senior field staff, • Company car, • Corporate expense account / credit card, • Company laptop and cell phone, • All required Personal Safety Equipment, • Company logoed clothing, • All supporting parts inventory needed for equipment maintenance, • Company supplied tools Experience and education • Minimum 3 years of field or plant equipment maintenance experience., • Corrugated Industry experience a plus, • Mechanical understanding of strapping machines, Mosca preferred, • High school diploma, • A valid driver's license, • Solid Mechanical / Electrical background, • PLC experience preferred, • Associates Degree a plus Excellent Pay and Benefits package • Medical, Dental and Vision benefits, • 401(k) retirement savings program, • Paid vacation and holidays, • Life Insurance, • Employee assistance programs EAM-Mosca is proud to be an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. Powered by JazzHR UbfeIGmDxn

Job Description Senior Engineering Lab Technician Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers many the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution with employer matching, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Monday through Friday This is an on-site role based in our White Plains, NY office. Office hours: 8:00 am to 4: 45 p.m. Salary Range: $65,000 to $85,000 per year; commensurate with experience Duties/Responsibilities: • Construct test sets and cable assemblies from schematics and assembly drawings, utilizing both hole and SMT technology., • Maintain a clean, organized lab environment that provides a shared resource to lab technicians and engineers., • Conduct routine calibration of electronic instruments, ensuring accuracy and reliability., • Coordinate external calibration for equipment that cannot be calibrated in-house., • Collaborate with the engineering team to troubleshoot and resolve equipment issues promptly., • Read, implement, and provide feedback on electrical and mechanical drawings., • Demonstrate proficiency with electrical lab tools to construct and assemble surface mount and through-hole technologies, aircraft harnesses, and test equipment., • Demonstrate proficiency with machine shop tools such as drill presses and mills., • Provide technical guidance and mentorship to lab technicians and engineers., • Ensure compliance with ISO or AS9100 standards within the lab., • Maintain accurate and up-to-date documentation for all lab equipment and activities., • Associate degree in electronics, avionics, or a related field with a solid understanding of electronic circuit theory., • Proficient in reading and editing schematics and mechanical drawings., • Strong computer skills with a willingness to learn and adapt to new tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #hc229034

Job Description Job Title: CT Technologist Location: New York, NY 10025 Job Type: Contract Duration: 9 Weeks Hours Per Week: 37.5 Shift Details: • Monday to Friday: 4:00 PM – 12:00 AM, • Weekend: Every other weekend (4:00 PM – 12:00 AM), • Perform CT scans using appropriate kV and mA techniques to ensure optimal image quality, • Conduct daily quality control (QC) and calibration checks on CT equipment, • Administer radiopharmaceuticals in accordance with physician orders and established protocols, • Maintain accurate patient records, department logs, and report equipment issues promptly, • Follow ALARA (As Low As Reasonably Achievable) radiation safety guidelines, • Perform quality assurance (QA) and safety testing procedures, • Manage patient imaging data for radiologist interpretation, • Order and verify patient-specific radiopharmaceutical doses prior to proceduresRequired Qualifications, • Active New York State Radiologic Technologist License (L.R.T), • ARRT Certification in Radiography and CT, • Basic Life Support (BLS) Certification, • Minimum 1 year of CT imaging experience, • Graduate of an accredited Radiologic Technologist program, • Proficiency in English (reading, writing, and speaking)Preferred Skills, • Strong attention to detail and patient care skills, • Ability to assess and respond to patient needs before, during, and after procedures About Navitas Healthcare, LLC: It is a certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided and your salary will be discussed upfront.

Job DescriptionJob Title: CT TechnologistLocation: Brooklyn, NYDuration: 13 Weeks ContractShift: VariedSchedule: * 3 Days per Week * 7.5 Hours per Day * 22.5 Guaranteed Hours per Week Compensation & Benefits (For Travelers): * Pay Rate: $80.00 – $85.00/hour (based on experience) * Estimated Weekly Gross Pay: $1,700 – $1,900 Job Summary: The CT Technologist is responsible for performing computed tomography (CT) procedures in accordance with established protocols to ensure high-quality diagnostic imaging. This role requires adherence to safety standards, accurate documentation, and excellent patient care throughout the imaging process. Key Responsibilities: * Perform CT procedures following prescribed imaging protocols * Adjust kV and mA settings to produce high-quality diagnostic images * Conduct daily quality control and equipment calibration checks * Administer contrast materials as ordered, following safety protocols * Monitor patients before, during, and after procedures * Maintain accurate documentation including logs, reports, and charge entries * Follow radiation safety standards, including ALARA principles * Manage imaging data for proper storage and radiologist review * Order, receive, and verify radiopharmaceuticals as per guidelines * Ensure compliance with regulatory and departmental policies Required Qualifications: * Minimum of 1 year of CT Technologist experience * Graduate of an accredited Radiologic Technology program * Valid New York State Radiologic Technologist License (L.R.T) * Current certification from the American Registry of Radiologic Technologists (ARRT) * ARRT Certification in CT (required) * Basic Life Support (BLS) certification Required Skills: * Strong knowledge of CT imaging protocols and equipment * Ability to maintain high image quality and diagnostic accuracy * Strong clinical judgment and patient care skills * Attention to detail with accurate documentation and compliance adherence For more details reach at or Call / Text at 518-862-1204.

Job Description Service Employee The Service Employer maintains and fuels all school buses, activity, and commercial buses in conjunction with First Student's Maintenance Department: dispenses fuel, checks oil, maintains accurate stick and meter readings, stocks required supplies and equipment, and coordinates the flow of buses to ensure safe operation. Performs light maintenance as necessary to buildings and grounds. $19.00/hr As a Service Employee, your major responsibilities will be to: • Opens the gates to the lot and checks bus parking areas to ensure all can be dispatched in a timely manner. Re-positions any buses that may impede the traffic in the yard, • Maintains accurate records and completes Bulk Fuel Receiving Report, Fuel Variance Report, Closing Month-end Report and Meter Calibration Report, • Notifies the Location Manager or designee when a fuel delivery is required and ensures that accurate stick readings are taken before and after delivery, • Checks and fills the oil, antifreeze, power steering, transmission fluid, brake fluid, windshield washer fluid and belts on buses being fueled, • Performs light interior and exterior maintenance on buses as required, • Tremendous Career Advancement Opportunities, • High school diploma or GED equivalent, • Knowledge of bus maintenance, • Ability to learn maintenance skills., • Subject to DOT drug testing and physical. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including marijuana, for any reason. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Are you interested in becoming a part of an innovative in-house maintenance facility working on private aircraft? Flexjet, an award-winning organization, is currently looking for an experienced Avionics Service Tech to join our team! This position is located at our White Plains, NY location Starting Pay Rate $ 85,120.00 + (based on experience). DUTIES & RESPONSIBILITIES • Troubleshoots, repairs, modifies and calibrates aircraft electronic systems and components, • Certifies integrated avionic systems and components at intermediate levels utilizing shop avionics support equipment and specialized precision measuring equipment, • Analyzes malfunctions and calibrates and performs maintenance on avionics support equipment using calibration standards, • Installs, aligns and wires electrical and electronic components such as sensors, radio communications, antennas and lights, • Performs continuity checks and functional checkouts of complete aircraft systems, • Process Inspection forms and sign name, as technician, after their work is completed, • Notify proper authority of any suspected unairworthy conditions found during the performance of their duties, • Sets up and operates necessary test equipment, • Conducts functional and operational tests to evaluate performance and reliability, • Demonstrates excellent communication skills, professionalism, and a positive customer service attitude without compromising quality, • Presents a clean and neat work area to customers facility cleanliness and general housekeeping, • High School diploma or equivalent, • A&P License, • 4 years of related corporate avionics experience, • Must be highly proficient in both troubleshooting/service and installation sides of the role, • Advanced certification in avionics preferred, • Must be flexible with shift work (3rd shift and one day per weekend), • Must be able to stand, sit, and bend for extended periods of time, • Must be able to lift up to 30 pounds., • Valid Drivers License, • Proficiency in Microsoft Office Suite While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme weather conditions. The noise level in the work environment and job sites can be loud. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 10 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Duties/Responsibilities: • Build test sets and cable assemblies from schematics and assembly drawings utilizing hole and SMT technology., • Assist engineering in construction and rework of electromechanical prototypes., • Perform routine calibration of electronic instruments and coordinate outside calibration for equipment that cannot be calibrated in-house., • Work with engineering to troubleshoot equipment., • Associate degree in electronics, avionics, or a related field with a basic understanding of electronic circuit theory., • Comfortable reading and editing schematics and drawings., • Proficient in using computers with a strong drive to learn new tools to work effectively with engineering. #hc132978

Job Description WHO WE ARE Since 1922, Westchester Country Club is an exclusive family-oriented private club located in Rye, New York. Westchester Country Club is among the top country clubs and proudly designated as a Platinum Club of America, ranking #29 out of the top 150 country clubs in the United States. With over 1,600 members, Westchester Country Club offers world-class facilities including the main club property and the beach club on the Long Island Sound. Club members enjoy two championship golf courses and a 9-hole executive course, comprehensive tennis and squash facilities, various dining options, an on-site fitness facility and indoor pool, and other specialized amenities. Westchester Country Club also has two large banquet rooms, conference facilities, member apartments, and guest accommodations. ABOUT THIS OPPORTUNITY We are hiring a seasonal Groundsperson to join our Golf & Grounds team. The Groundsperson is responsible for operating various mechanical and manual tools and equipment in a safe, efficient and effective manner to improve aesthetics, maintain course conditions and playability of Westchester Country Club Grounds, for the membership’s enjoyment, while reducing the effects of extensive play. This position will also aid in the completion of various construction projects. WHAT YOU'LL DO The Groundsperson must complete all tasks and assignments assigned by the Director of Golf & Grounds and/or Superintendent, including but not limited to: • Manage preparation and assembly of required tools and equipment, • Operate motorized equipment, • Perform course maintenance, including but not limited to divot filling, mechanical and manual sand trap raking, rotary mowing, • Maintain familiarity with courses and grounds, • Assist in light construction projects across courses and grounds, • Learn, understand and utilize all equipment in safe and proper manner, • Participate in continuous on the job training WHAT YOU'LL NEED • Must possess a strong sense of direction, with the ability to plot and remember landmarks and understand maps, • Must have ability to perform intermediate mechanical repairs, including change oil, filters, plugs and tires, • Must have ability to operate a tractor and Cushman, including knowledge of calibration procedure and protective clothing, • Must have demonstrated proficiency in distinguishing Club courses, various hole numbers and other areas of the grounds including sprinkler heads and valve boxes, • Must possess, or have ability to develop, basic knowledge of various aspects of Golf & Grounds maintenance, including maintenance standards and equipment operation, • Must have strong attention to detail, • Must have ability to work variable schedule, including flexible shifts, • Must have ability to work outdoors, including in various weather conditions, • Must be safety and efficiency-minded, following safe operating procedures at all times, • Must have demonstrated desire to contribute to the overall improvement of playability and aesthetics of Club courses and grounds, • Must demonstrate strong communication skills, with the ability to communicate effectively and professionally with team members, Members and guests PAY RANGE $17.00-$17.50 hourly compensation, commensurate with experience OUR TOTAL REWARDS ALL team members enjoy free lunch and dinner meals, free parking, a lifestyle discount program, and numerous recognition events and activities throughout the year.

Job Description The Entry‐Level Field Service Technician supports the installation, maintenance, and repair of medical imaging equipment in hospitals, clinics, and imaging centers. This role is ideal for candidates early in their technical careers who are eager to learn, grow, and gain hands‐on experience with diagnostic imaging systems. Key Responsibilities • Assist senior technicians with installation, calibration, and repair of imaging systems, • Perform basic preventive maintenance under supervision, • Troubleshoot simple mechanical, electrical, or software issues with guidance, • Document service activities including parts used and work performed, • Support customer training by helping demonstrate basic equipment functions, • Follow safety protocols related to electrical systems and radiation‐controlled areas, • Participate in OEM and internal training programs to build technical expertise Required Skills & Qualifications • Basic understanding of electrical circuits, mechanical systems, or computer hardware, • Strong willingness to learn complex imaging technologies, • Good communication and customer service skills, • Ability to travel within assigned territory, • Valid driver’s license Work Environment • On‐site work in hospitals, clinics and Veterinary facilities, • Training provided through shadowing, classroom instruction, and OEM courses, • May require lifting equipment, working in tight spaces, or occasional after‐hours supportCompany DescriptionWe sell and repair veterinary imaging equipment.We sell and repair veterinary imaging equipment.

Job Description R&D Lab Technician White Plains, NY (100% Onsite) $24.40/hr 2 openings: M-F Day shift • 1 Full-Time (40 hrs/week), • 1 Part-Time (20 hrs/week) Contract with potential conversion after 91 days Role Overview This role supports a fast-paced Research & Innovation (R&D) team focused on food and beverage product development. You will handle a mix of lab operations, pilot plant support, product testing, and logistics. The goal is to keep trials moving, labs organized, and data flowing. This is a hands-on role. You will be on your feet, working with ingredients, samples, and equipment daily. Key Responsibilities Lab Operations & Organization • Clean, organize, and restock product development labs daily, • Maintain ingredient and supply inventory, • Clean and organize coolers, storage areas, and workspaces, • Assist scientists and pilot plant teams during product trials, • Prepare samples, label materials, and coordinate tastings, • Support shelf-life studies including product evaluation and sensory testing, • Record observations and assist with basic data tracking, • Perform routine equipment calibrations, • Coordinate vendor visits for calibration and maintenance, • Manage incoming and outgoing shipments of ingredients and samples, • Unpack, organize, and track deliveries, • Prepare and ship product samples Experience • 1+ year in a lab, manufacturing, or food production environment preferred, • Basic understanding of food safety and lab procedures, • Strong organization and attention to detail, • Ability to follow processes and document results, • Comfortable working in a fast-paced, hands-on environment, • Strong communication skills, • Reliable and punctual, • Able to manage multiple tasks with limited supervision, • Comfortable with repetitive tasks and physical work, • Standing, walking, bending, and lifting up to 50 lbs, • Frequent use of hands and arms, • Must be able to taste and smell food products Core Coverage • Medical, dental, and vision insurance options, • New York State Paid Sick Leave, • Accrual: 1 hour per 30 hours worked, • Weekly pay, • W2 employment, • Overtime eligible for full-time role (40+ hrs/week, if approved)

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Working at the Naval Nuclear Laboratory we foster pride in belonging to an organization whose culture is made up of these core values: Trust, Empowerment, and Collaboration.Our company promotes a positive culture while ensuring the safety and reliability of our nation's naval nuclear reactors, and t

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - - Responsibilities: Apply and remove ID tape/bar codes and/or company or name emblems on garments using an industrial heat sealing machine; Place completed garments in the appropriate location to facilitate organization and delivery to customers; Maintain the cleanliness of the

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Atria Senior Living - - Responsibilities: Diagnose and repair problems in HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.Complete assigned service requests and repairs consiste

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower empl

Island Hospitality Management - - Responsibilities: Perform routine and preventative maintenance on resort facilities; Complete minor repairs to rental homes and facilities; Inspect irrigation systems, playgrounds, pool/spa, and recreational amenities; Maintain resort pool(s) and test chemical leve

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Cintas Corporation - - Responsibilities: Repair, maintain, install and troubleshoot industrial equipment; Perform preventive/predictive maintenance; Resolve safety concerns; Perform indoor and outdoor housekeeping; Monitor inventory and maintain maintenance records.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

ImageFIRST - - Responsibilities: Responsible for the installation, maintenance, troubleshooting, and repair of industrial machinery; Perform preventative and predictive maintenance on industrial machinery; Program PLC's; Complete daily maintenance and repair logs; Follow all safety procedures.

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Chromalloy - 330 Blaisdell Road - Responsibilities: Assist in troubleshooting, repairing, and maintaining electronic systems, control panels, and electrical components; Learn to read and interpret blueprints, schematics, wiring diagrams, and technical manuals; Support preventive and corrective maint

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

C&W Services - - Responsibilities: Safety: Promote a safe working environment by following all safety procedures; Maintenance: Maintain and troubleshoot all conveyor systems in the building; Install, maintain, and troubleshoot motors, variable frequency drives, bearings, reducers, belts, rollers, p

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a.Spectrum, yo

This role requires the ability to work lawfully in the U.Plus, enjoy perks like free and discounted internet, TV, and mobile, all while paving the way for a long and rewarding career with us.Do you enjoy solving technical challenges? Do you like working in in a dynamic environment? As a.Spectrum, yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

WARFIGHTERS NEED MEDICAL WARRIORS.Saving lives is the mission-but for Special Operations medics, it's a mission fought in the shadows.These elite medical specialists don't just treat injuries; they bring life-saving expertise into the fight.From stabilizing wounded operators under enemy fire to leap

This position is responsible for maintaining production uptime during the shift, by troubleshooting repairing and maintaining equipment, as well as performing calibration, and facilities maintenance. Maintains and responds to the requirements of the calibration and preventative maintenance system. E