Trabajos calibration en Bay Shore, New YorkCrear alertas

Job DescriptionExciting opportunity to join a growing, global pharmaceutical organization as a QA Inspector! This is a direct hire opportunity to work the 2nd shift : 3pm-11pm. Responsibilities: • Monitor and ensure product quality is maintained through all phases of manufacturing in compliance with established specifications., • Perform in-process testing (e.g. weight, thickness, hardness, disintegration, friability, etc.) as per manufacturing batch record instructions., • Perform room and equipment checks (where applicable) prior to each stage of manufacturing following detailed written procedures., • Prepare in-process and finished product samples (where applicable) for QC lab, following detailed documentation procedures and delivering them to QC lab., • Maintenance of standard weights and perform daily verification of balances., • Monitor facility and product environmental operating conditions., • Review of engineering records (temperature and humidity data calibration and PM records, Pest control records and contractor related functions)., • Perform AQL sampling and inspections as required., • Ensure the proper isolation of rejected material generated during batch process and accountability in the batch record., • Review of online batch records in terms of completeness of signatures, entries, and actual reconciliation / yields prior to initiation of next processing step., • Verification of functionality of all the equipment and associated controls during the batch run., • Perform applicable testing and prepare report for customer complaints., • Identify and report any non-conformances/discrepancies to management if applicable. Requirements:, • High School Diploma/GED, • Prior experience in the pharmaceutical industry or quality. Knowledge of good manufacturing practices (GMP) and good documentation practices is preferred., • Ability to read, write and communicate effectively., • Self-motivated, with the ability to work in a fast-paced manufacturing environment and handle multiple tasks simultaneously., • Excellent organization skills with the ability to focus on details, • Basic computer skills (Word and Excel) Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job DescriptionDescription: Position Summary: The Chemist is responsible for and has experience in performing chemical analysis for one of the assigned QC laboratories (Raw Material, Finished Product, Microbiology, ICP, Technical Support) which is responsible for the analysis and disposition of commercial materials (raw materials, finished product release, stability, validation, investigation), and environmental samples, as assigned, and documenting results in accordance with SOPs. Responsibilities: Responsibilities include, but are not limited to: • Follow all laboratory SOPs, including but not limited to laboratory safety, chemical handling and storage, gowning, equipment use, cGMP, GDP, data integrity, DEA requirements, etc., • Perform routine laboratory chemical analysis on finished product, stability, raw material, and/or investigation samples, as assigned, using HPLC, UPLC, GC, UV-vis, FTIR, ICP, TOC and other wet chemistry techniques in accordance with the prescribed approved analytical test method., • Maintain a clean and organized laboratory working environment., • Dispose of used/expired/excess chemicals, solutions, solvents, etc. in dedicated waste receptacles., • Report well-written, accurate and timely results., • Review data, calculations, notebooks, and reports., • Assist in laboratory investigations, as assigned., • Assist in Cleaning, Method and Process validation testing and protocol/report review, as assigned., • Assist in maintaining and troubleshooting laboratory equipment., • Suggest improvements to existing testing methods when possible., • Mentor and give guidance to entry-level personnel on techniques performed in the lab and assist with laboratory related questions as needed., • Assist with routine Metrology functions, including instrument cleaning/ preventive maintenance/ calibration/ verification activities., • Monitor and assist with maintaining proper inventory levels of all laboratory supplies., • Assist with sample receiving, chemical inventory, document filing, housekeeping, etc., • Bachelor’s degree in a science related field., • Knowledge of laboratory chemistry and cGMPs., • Proficient in Microsoft Word, Excel, graphs/charts and databases., • Proficient in HPLC/UPLC, ICP, Dissolution, IR, UV/VIS, and wet chemistry testing., • Proficient with analytical laboratory software., • Able to multitask and meet tight deadlines., • Excellent organizational skills with attention to detail., • Able to effectively present results., • Able to perform testing on many methods and troubleshoot minor method issues. May require some guidance/supervision as needed., • Required to sit and stand for long periods of time., • Frequently reaching with arms/hands up to 2 feet., • Good hand eye coordination., • Occasionally required to walk and kneel., • Must be able to lift and/or move up to 50 pounds., • Must be able to use close vision, distance vision, peripheral vision, color vision and the ability to adjust focus., • Required to reach with arms and use hands and fingers to handle or feel objects, tools and computer controls., • Work environment in laboratory and production operations facilities include close proximity to heavy machinery and pharmaceutical powders., • Potential to move between production operations sites/areas to complete job functions., • Employee work hours/schedule and/or shift are subject to change based on business needs and Management discretion., • Required to be present in the laboratory to perform daily testing and collaborate with department director, manager, and peers. $50,000 - $80,000 per year

Job Description Consolidated Aircraft Supply Co., Inc., based in Ronkonkoma, New York, is a leading FAA Part 145 repair station with EASA certification that has been operational since 1960. We specialize in providing maintenance, repair, and overhaul (MRO) services for aircraft accessories and rotables, with capabilities covering over 50,000 parts, particularly in ATA Chapter 24 Electrical Power. Our services include exchange/loan, outright sales, and aircraft on ground (AOG) support for a diverse clientele, including military and public sectors, cargo and private operators, as well as commercial airlines. We are seeking a dedicated Electronics Bench Technician to join our experienced team of technicians, engineers, and account managers. In this role, you will play a crucial part in ensuring the superior quality and efficiency of the electronic repairs and maintenance we offer to our global customers, contributing to the overall success and sustainability of our operations in the aerospace industry. Responsibilities • Conduct electrical repairs and maintenance on aircraft accessories and rotables., • Perform troubleshooting and diagnostic testing on various electrical components and systems., • Document repairs and maintenance performed in accordance with FAA regulations and company policies., • Assist with the calibration and testing of electrical equipment and systems., • Work effectively with team members to meet project deadlines and service schedules., • Ensure compliance with EASA and FAA standards during repairs and inspections., • Maintain an organized and clean workspace, ensuring safety protocols are followed.Requirements, • High school diploma or equivalent; technical degree in electronics or related field preferred., • Minimum of 3 years of experience in electronics repair or a related field., • Familiarity with FAA regulations and EASA certification requirements., • Proficient in using electronic test equipment and tools, including multimeters, oscilloscopes, and soldering equipment., • Ability to read and interpret technical drawings, schematics, and repair manuals., • Strong analytical and problem-solving skills., • Excellent communication and teamwork abilities.

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. This is a Part Time position of 20-24 hours per week. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: PDC, an AS9100-registered electronics manufacturer, is seeking a part-time Calibration Coordinator to support our quality system by managing calibration activities. This temporary role (20 hours/week) ensures compliance with AS9100 and customer requirements through effective coordination and record-keeping. The ideal candidate is a self-starter who can work independently, solve problems proactively, and push through obstacles without constant direction. Calibration activities will be tracked using GagePack. Key Position Accountabilities: Schedule and track calibration of all measurement and test equipment using GagePack. Maintain calibration records and ensure timely updates. Coordinate with external calibration service providers. Monitor due dates and issue reminders to equipment owners. Support audits by preparing calibration documentation. Assist with nonconforming equipment identification and follow-up. Work through routine challenges with minimal supervision. Qualifications: Experience in calibration or quality systems in a manufacturing environment Familiarity with GagePack or similar calibration software Knowledge of AS9100 and basic metrology principles Strong attention to detail and organizational skills Schedule: 20 hours per week; flexible within standard business hours This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description LNK International, Inc. is one of the nation's largest manufacturers of solid and liquid dose, over the counter (OTC) pharmaceuticals. For over 40 years, we have built a reputation for delivering the highest quality products, outstanding service and product innovation. What sets LNK apart? We believe it is our employees. There is a commitment to quality in every department at LNK. As a member of our Quality Assurance department you will be working with dedicated professionals who support and interact with all areas of the company. Our full time employees enjoy competitive benefits including: • 401(k) with generous employer match, • Health Insurance, • Dental Insurance, • Paid holidays, • Paid vacation Responsibilities: Responsibilities include but are not limited to overseeing QA warehouse personnel performing product quality checks and shipping and return record review. THIS POSITION IS IN THE WAREHOUSE AND REQUIRES LIFTING, MOVING PALLETS, FREQUENT BENDING AND WORKING ON A PLATFORM UP TO 20 FEET OFF THE GROUND. • Supports production activities related to the timely production of finished goods., • Ensure that any required sampling is performed and samples are submitted to QC/QA., • Assist when needed for any pertinent investigations involving respective areas., • Monitor warehousing and staging areas to ensure materials are being received/shipped/returned/maintained within cGMP and SOP Guidelines., • Maintain the retain sample area to established standards., • Report building maintenance issues to ensure compliance with AIB, HACCP, cGMP regulations and pertinent SOP's and report them to the QA Supervisor., • Assist in the monitoring and maintenance of the Pest control, calibration and temperature monitoring programs., • All other duties as assigned Education and Experience: • HS Diploma, • Must be able to drive a Hi-Lo (has or had a license, • At least one year of directly related warehouse experience., • Some supervisory experience preferred., • This position requires movement between buildings frequently. Work Environment: • In person. There is no remote option for this role. LNK provides equal employment opportunities to all applicants and prohibits discrimination of any type on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws. Job Posted by ApplicantPro

Job DescriptionBenefits: • Competitive salary, • Free food & snacks A CNC Operator is responsible for operating and maintaining CNC machinery to produce high-quality parts and components, ensuring precision and adherence to specifications. This is a full-time position (Monday through Friday, 7:00 AM 3:30 PM, 40 hours per week). Benefits include paid vacation and personal days after the probationary period. Key Responsibilities • Machine Setup: Prepare and set up CNC machines based on job requirements, ensuring proper calibration and alignment., • Programming: Write and modify CNC programs to control machining processes, optimizing efficiency and accuracy., • Quality Control: Conduct routine inspections of machined parts to verify conformance to specifications and quality standards., • Maintenance: Perform regular maintenance on CNC machines to ensure optimal functionality and longevity., • Documentation: Maintain accurate records of machine settings, adjustments, and production metrics., • Technical Skills: Proficiency in reading technical drawings and blueprints, and a strong understanding of CNC machine operations and programming., • Attention to Detail: Excellent attention to detail and commitment to producing high-quality work., • Problem-Solving: Ability to troubleshoot and address issues during the machining process., • Physical Stamina: Capability to stand for extended periods and lift heavy materials if required. Closets by Design is a nationally recognized leader in home organizing systems. We design, manufacture, and install a complete line of custom closets, home office furniture, media systems, wall-beds, garage cabinetry and more. We desire motivated, organized, caring individuals who have a passion to provide outstanding craftsmanship and superior customer service. Closets by Design of Long Island values an inclusive work force and provides equal employment opportunities. All qualified applicants will be considered for employment without regard to an individuals age, race, ethnicity, national origin, religion, gender, sexual orientation, marital status, medical history, veteran or disability status.

Job DescriptionDescription: Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! The RF Technician is responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Responsibilities: • Performs customer support activities either in-house or on-site involving the calibration and certification of RF Test and Measurement equipment utilizing a variety of automated calibration systems, • Interact directly with customers directly, • Follows established policies and procedures in conducting on-site or in-house repair and calibration of equipment to ensure it meet high standards of performance, • Diagnoses equipment malfunctions and performs repairs, • Represents the company in a customer support role and is responsible for customer's satisfaction with equipment and servicing, • Perform other duties as assigned Requirements:, • Military training or experience (PMEL OR TMDE OR Electronics) ' OR an Associates Degree in Electronics (or related technical field); OR equivalent work experience & training., • Minimum of 5 years of calibration experience., • Experienced in calibrating several disciplines of test and measurement equipment such as:, • Electronic, • RF Microwave, • Temperature, • Strong communication skills including written, verbal and listening skills., • Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc., • Experience in interacting with customers in a courteous and professional manner and providing an excellent customer experience., • And we would prefer:, • Knowledge of ANSI / NCSL Z-540-1, ISO 9000, and ISO/IEC 17025 In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: • Dental, • Vision, • Employee Assistance Program, • Basic Life/AD&D Insurance, • Long Term Disability Insurance

Job Description Company Summary: Radienz Living is a leading North American manufacturer of home and personal care products, such as unit dose laundry and dish products, facial wipes, and baby wipes. With manufacturing plants and warehouses in Chicago and Long Island, NY, the company provides customers with private-label solutions and contract manufacturing services for products found in retail and institutional markets. Through its commitment to agility, innovation, trust and reliability, and sustainable creation, Radienz Living is passionate about providing its customers with products that support a cleaner way of living and a more radiant world. The company has undergone a remarkable transformation over the last two years, focusing on two product lines: Unit Dose products, where it is the undisputed leader in Private Label and Contract Manufacturing, and Personal Care Wipes, where it manufactures the wipes for the country's #1 beauty care brand. Our commitment to operational excellence is supported by robust quality systems, multiple GMP certifications, and a comprehensive suite of in-house labs—including FDA/EPA-certified microbiology, quality control, chemistry, and R&D facilities. This infrastructure enables us to deliver innovation, safety, and performance at every stage of the product lifecycle. Background: The Lab Technician/Lab Assistant supports the daily operations of the Microbiology Laboratory by preparing samples and materials for testing in accordance with established procedures and quality standards. This includes completing and organizing all required documentation, logging samples into laboratory records and systems, and preparing media, solutions, and other testing materials. The role is also responsible for monitoring and recording equipment temperatures, cleaning and maintaining laboratory instruments according to schedules and SOPs, and ensuring the lab environment remains clean, safe, and compliant with regulatory and company standards. Responsibilities: • Record temperatures for incubators, refrigerators, and water baths., • Operate autoclaves and perform control procedures, including biological indicator checks and temperature verification, • Conduct daily calibration of laboratory instruments such as balances and pH meters., • Collect water, swab, and environmental air samples for microbiological testing., • Read ampoules in the dry bath and accurately document results., • Log all samples into the microbiology sample logbook and complete required documentation for each test., • Prepare bottles, tubes, and plates for Microbial Limits Testing (MLT) and other microbiological analyses., • Prepare and adjust the pH of media required for laboratory testing., • Maintain a clean, organized, and safe laboratory environment, including washing and sterilizing glassware and equipment., • Run autoclave cycles for biohazard waste, media preparation, and sterilization of filters., • Monitor and maintain laboratory supply inventory; ensure necessary materials are available and restock as needed. Qualifications & Requirements: • High school diploma or equivalent required; associate or bachelor’s degree in Biology, Microbiology, or a related scientific discipline preferred., • Prior experience in a microbiology or quality control laboratory within a manufacturing or regulated environment preferred., • Familiarity with aseptic techniques, autoclave operation, and environmental monitoring procedures., • Ability to accurately perform and document routine laboratory tests and calibrations., • Strong attention to detail and adherence to Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP)., • Basic computer skills and experience with data entry or laboratory information systems., • Ability to work independently and collaboratively in a fast-paced production environment., • Strong organizational and communication skills., • Physical ability to stand for extended periods and handle laboratory materials and equipment safely. Physical Demands: • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to handle or operate laboratory instruments, tools, and materials., • The role may involve frequent bending, reaching, and lifting or moving objects up to 25 pounds., • Visual acuity and manual dexterity are required to accurately perform laboratory tests, record data, and handle small equipment and glassware., • The employee must be able to wear required personal protective equipment (PPE), such as lab coats, gloves, safety glasses, and masks, as necessary., • Extended periods of standing during testing or media preparation may be required. Work Environment: • Work is performed primarily in a laboratory and manufacturing environment where exposure to biological agents, chemicals, and disinfectants may occur., • The role requires adherence to all safety procedures, including the use of PPE and compliance with Good Laboratory Practices (GLP) and Good Manufacturing Practices (GMP)., • The noise level in the work environment is generally moderate but may vary depending on production activity., • The laboratory environment is temperature-controlled, but occasional work in production or warehouse areas may be required., • The employee must maintain a clean, organized, and safe workspace in accordance with company and regulatory standards. Why Join Us? At Radienz Living, we take pride in making high-quality personal care and household products that people trust every day. As part of our team, you’ll join a company that values safety, teamwork, and continuous improvement. We believe in investing in our people — providing hands-on experience, training, and opportunities to grow your career in manufacturing, quality, and operations. You’ll work in a clean, professional, and collaborative environment where your contributions make a direct impact on the products we deliver to leading brands and consumers. At Radienz Living, we’re more than a manufacturing company — we’re a community built on respect, reliability, and shared success. The approximate hourly pay for this position is $18.00-$23.00*. Please note that the pay range provided is a good faith estimate for the position at the time of posting. Final compensation may vary based on factors including but not limited to knowledge, skills and abilities as well as geographic location. Radienz Living is an equal employment opportunity employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status or any other characteristic protected by applicable law. Prior to the next step in the recruiting process, we welcome you to inform us confidentially if you may require any special accommodation to participate fully in our recruitment experience. Contact us at 631-952-0100. This position is not eligible for Visa Sponsorship. 1st shift, Monday - Friday; 8am - 4:30pm

Job Description The Control Technician will provide services related to the retro commissioning and calibration of existing control systems. The position will work with project managers and subcontractors to meet project requirements. The control technician will be responsible for assisting in calibration, point to point check out, programming, and testing of Direct Digital Control (DDC) building automation and control systems as directed. Responsibilities/Duties • Helps to maintain accurate and thorough project documentation and redlines, • Complete sensor calibrations on HVAC control systems, • Complete PID loop tuning on equipment programs to optimize equipment operation, • Assist with project sub-contractors where needed, specifically test and balance contractors, • Assist the project team in the engineering of control system hardware and software programming based on project plans, specifications, and other contract documents, • Excellent verbal and written communication skills, • Proficient in Microsoft Office Suite, • Previous experience with Niagara 4 workbench software, • Strong analytical skills, • Experience with electronics and basic electrical circuits, • Thorough understanding of and ability to use appropriate tools, including test equipment to aid in calibration of sensors, • Excellent customer service and ability to work well with others, • At least 1 year of experience with programming, startup and/or commissioning of control systems, • Niagara Ax or N4 certification a plus but not required

Job Description We are seeking a diligent and technically-minded Entry-Level Electronics Test Technician to join our growing Quality Assurance department. The ideal candidate will play a crucial role in ensuring our products meet the highest standards of quality and reliability. This position involves hands-on testing of electronic devices, troubleshooting, and maintaining test equipment. This is an excellent opportunity for an individual looking to start their career in the electronics industry and develop valuable technical skills. Key Responsibilities Product Testing: Execute a variety of tests on electronic assemblies and final products according to established procedures and engineering specifications. Equipment Operation: Set up and operate standard electronic test equipment such as multimeters, oscilloscopes, power supplies, and function generators. Troubleshooting & Diagnostics: Identify, diagnose, and document defects or non-conforming issues found during the testing process. Perform basic root cause analysis to understand failures. Fixture Maintenance & Repair: Perform routine maintenance, calibration, and repair of test fixtures to ensure their accuracy and reliability. This includes soldering and replacing components like connectors, gaskets, and PC boards as needed. Documentation: Accurately record test results, failure data, and repair actions in our quality management system. Prepare clear and concise reports for the engineering and production teams. Process Adherence: Follow all documented work instructions, safety protocols (including ESD-safe practices), and quality standards. Workspace Management: Maintain a clean, safe, and organized work area to ensure efficiency and prevent accidents. Required: High School Diploma or GED. Demonstrable ability to solder and de-solder basic through-hole and surface-mount electronic components. Familiarity with common electronic test equipment and basic computer skills (MS Office, data entry). Ability to read and interpret basic technical documents, such as schematics, assembly drawings, and work instructions. Strong attention to detail and a methodical approach to tasks. Excellent problem-solving skills and a desire to learn. Preferred: Associate's Degree or technical certification in Electronics Technology or a related field. Previous experience in a manufacturing or electronics lab environment. Familiarity with specific test equipment software (e.g., LabVIEW) or automated test systems. Understanding of electronic principles and circuit theory. Physical Demands: Ability to sit or stand for extended periods. Manual dexterity is required to handle small components and tools. Must be able to lift and carry up to 25 lbs. May require the use of a microscope for detailed soldering and inspection tasks. Company DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements., • Communicate inspection failures, deviations, and non-conformances to Director of QA, • Perform inspections for all incoming and outgoing material, • Follow written instructions provided in company procedures and specifications, • Review batch records and ensure compliance to the associated procedure, documentation, specs, etc., • Perform mechanical inspection of product according to documented processes. Includes physical inspection and paperwork inspection to verify conformance to requirements (i.e. correct process performed, paint thickness is acceptable per customer requirements, temper verification by processor proves acceptable, etc.)., • Able to interpret engineering drawings, specifications, purchase orders, statement of work and standards to determine quality status., • Accurately document and maintain associated paperwork and inspection results in a consistent and timely fashion., • Identify/communicate continuous improvement opportunities for the quality program., • Accurately complete all required documentation, • Perform inspections for all incoming and outgoing material, • Perform measurement and final visual inspection Qualifications: • 3 - 5 years experience in Final and In-Process inspection of aircraft detail parts and structural assemblies- a plus, • Associates degree or equivalent education and work experience, • Knowledge of calibration of inspection tools - Will Train, • Knowledge of measuring tools and proficient in reading blueprints a plus Job Posted by ApplicantPro

Job Description Summary Certifies, fabricates, assembles, installs, alters, maintains and dismantles all piping and plumbing, including hangers and supports, and pipe cutting, bending and welding activities necessary to the performance of the task. Duties and Responsibilities • Certifies, fabricates, assembles, installs, alters, maintains and dismantles all piping and plumbing, including hangers and supports, and pipe cutting, bending and welding activities necessary to the performance of the task., • Installs, maintains and repairs necessary piping on refrigeration, heating and air conditioning equipment. Installs and dismantles unit heaters and coolers, shell type heat exchangers, tanks and package boilers. Installs filters, seals and packing on air, refrigeration, heating and air conditioning equipment except compressors in the shop for rebuild., • Certifies, installs, adjusts and maintains such items as gages, regulators, temperature control devices, recording instruments and flow meters pursuant to the task (excluding calibration)., • Installs insulation and covering on all piping and equipment as described above., • May lubricate equipment when necessary in the performance of related tasks., • Uses all tools and equipment pursuant to the task, including hand or power equipment to hoist and move personnel and materials except mobile cranes., • May transport tools, materials, and equipment to and from job site which are to be used by employees in the Pipefitter job classification., • Performs related tasks as necessary in the completion of the employee's primary work assignment in the Pipefitter job classification., • May perform cleaning of roof cooling towers pursuant to the task., • US Citizenship, able to obtain and maintain US DOT clearance, • Ability to work any shift, • Valid Driver's License, • Certified Welder, • Journeyman Pipefitter, • NATE Certification, • Welding Certification

Position: Associate Buyer (Procurement) Location: Central Islip, New York, USA Employment Type: Full-time (Onsite) Industry: Pharmaceuticals / Biotechnology / Clinical Research Work Hours: Monday – Friday, 8:30 AM – 5:30 PM Job Purpose: The Associate Buyer (Procurement) will manage the end-to-end Procure-to-Pay (P2P) process for materials, Opex, and services. This includes ensuring cost-effective purchasing while maintaining quality, compliance, and timely delivery standards. The role requires active involvement in supplier management, negotiations, contracts, and process optimisation. Key Responsibilities: • Manage end-to-end procurement activities, including RFQs, negotiations, contracts, and payments., • Create and process purchase orders (POs) in SAP based on requisitions, ensuring accuracy and compliance., • Work with internal stakeholders to procure Opex and services (testing, calibration, maintenance, rate contracts, etc.)., • Develop and maintain strong supplier/vendor relationships to ensure quality, compliance, and timely delivery., • Negotiate pricing, terms, and conditions to secure favourable outcomes., • Identify and develop alternate vendors to diversify the supply base and mitigate risk., • Monitor supplier performance and implement corrective measures as needed., • Oversee logistics activities, including tariff impact, freight, and shipping optimisation., • Coordinate with stakeholders and use SAP to optimise inventory levels, avoiding shortages., • Prepare and analyse procurement reports (e.g., PR-PO conversion, open orders, spend analysis)., • Identify opportunities for cost savings and process improvements., • Ensure procurement activities comply with organisational policies and regulatory requirements., • Stay informed on industry trends, market insights, and procurement best practices. Key Interactions: • Internal: R&D, Operations, QA/QC, Finance, Legal, Manufacturing teams., • External: Suppliers, vendors, service providers, freight forwarders, customs/clearance agencies. Qualifications & Skills: Education: • Bachelor’s degree (preferred) or Diploma in Chemical/Engineering or related field. Experience: • 3+ years in procurement, vendor negotiation, supplier management, or logistics., • Experience with materials/parts purchasing, reporting, and strategic vendor management., • Familiarity with SAP, Microsoft Suite, and GMP documentation practices., • Strong knowledge of supply chain systems, forecasting, and budgeting. Competencies: • Strong negotiation and vendor management skills., • Excellent analytical, problem-solving, and decision-making ability., • Effective communication and presentation skills., • Ability to collaborate with cross-functional teams., • Understanding of compliance and risk management in procurement., • Continuous improvement mindset with proven process optimisation skills. Work Authorisation Requirement: • Must be a U.S. citizen or Green Card Holder. Benefits • Competitive salary, • Standard industry benefits package, • Eligibility for the performance-based bonus program Application Process: Please submit your CV and a cover letter outlining your relevant experience and qualifications. Equal Opportunity Employer: We are committed to fostering a diverse and inclusive workplace. All qualified applicants will be considered without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, disability, age, or veteran status. Contact Person: ___

RESPONSIBILITIES: \n Perform first piece and in-process inspection on all parts being manufactured \n Maintain daily/weekly inspection schedules on all machines \n Interact with machinist on the floor to review inspection requirements for each job before approving production. \n Perform incoming inspection on vendor supplied parts and processes \n Perform final inspection on all outgoing parts to customers \n Supply required gages/measuring equipment to shop floor personnel \n Perform internal calibration of measuring equipment per AS9100 requirements \n Maintain and monitor measuring equipment. \n Report to management on a regular basis with any discrepancies \n QUALIFICATIONS: \n Strong math skills \n Understanding machine shop processes including CNC milling, turning, grinding and EDM \n Strong teamwork skills \n Working knowledge of CMM usage and programming \n Working knowledge of measuring equipment such as micrometers, calipers, indicators, thread gages, comparators, hardness tester, profilometers, dial bore gages, etc \n Strong knowledge of GD&T

Trescal is a growing company, looking for new talent to join our organization! We are the premier independent calibration, repair, and asset services provider in the U.S. We provide our customers single-source, cost-effective, best-in-class solutions. Our team is comprised of talented professionals who excel at providing industry leading calibration, repair and asset management services to our customers. As an employee at Trescal, you will join a people-centric company with an incredible culture. We encourage new ideas and suggestions in order to continue to offer both customers and employees the services and benefits in a dynamic, global marketplace. We value teamwork, integrity, quality, innovation, and dynamic engagement. Does Trescal sound like the place for you? Then join our team! The RF Technician is responsible for providing calibration services for test equipment primarily in the field of RF and Electrical metrology. Responsibilities: \n • Performs customer support activities either in-house or on-site involving the calibration and certification of RF Test and Measurement equipment utilizing a variety of automated calibration systems\n, • Interact directly with customers directly \n, • Follows established policies and procedures in conducting on-site or in-house repair and calibration of equipment to ensure it meet high standards of performance\n, • Diagnoses equipment malfunctions and performs repairs\n, • Represents the company in a customer support role and is responsible for customer's satisfaction with equipment and servicing\n, • Perform other duties as assigned \n\n Requirements \n • Military training or experience (PMEL OR TMDE OR Electronics) ' OR an Associates Degree in Electronics (or related technical field); OR equivalent work experience & training.\n, • Minimum of 5 years of calibration experience.\n, • Experienced in calibrating several disciplines of test and measurement equipment such as:\n, • Electronic\n, • RF Microwave\n, • Temperature\n, • Strong communication skills including written, verbal and listening skills.\n, • Proficient computer skills including but not limited to Microsoft Office (Word & Excel), Internet research, data entry, etc.\n, • Experience in interacting with customers in a courteous and professional manner and providing an excellent customer experience.\n, • And we would prefer:\n, • Knowledge of ANSI / NCSL Z-540-1, ISO 9000, and ISO/IEC 17025\n In addition, we offer paid time off, a 401k plan, career development opportunities, referral bonuses, and a competitive benefit package, including these company paid benefits: \n • Dental\n, • Vision\n, • Employee Assistance Program\n, • Basic Life/AD&D Insurance\n, • Long Term Disability Insurance\n

Job Description The BAS Service Technician will provide services related to the retro commissioning and calibration of existing control systems. The position will work with project managers and subcontractors to meet project requirements. The control technician will be responsible for assisting in calibration, point to point check out, programming, and testing of Direct Digital Control (DDC) building automation and control systems as directed. Responsibilities/Duties • Service and/or maintain building automation systems., • Troubleshoot issues that come up based on service tickets and repair as needed or directed by BAS management., • Respond to emergency service calls in a timely manner., • Assist with startup, commission, and re-commission of customer systems that utilize pneumatic/electrical/electronic technology., • Complete paperwork on-time, including timesheets, expense reports, posting of work orders, on-site documentation, and project status reports. Required Skills • Service and/or maintain building automation systems., • Provide exemplary service on local BAS system., • Troubleshoot issues that come up based on service tickets and repair as needed or directed by BAS management., • Respond to emergency service calls in a timely manner., • Assist with startup, commission, and re-commission of customer systems that utilize pneumatic/electrical/electronic technology., • Calibrate systems using basic electronic test equipment, such as multi-meters, network terminals, and/or a laptop computer., • Perform job database backups on a regular basis., • 2 years’ experience performing the same work., • Familiarity with existing BAS components, BACnet and others. Salary Range: 40k-60k

Job Description Vacuum Instruments Corporation is one of the world’s largest companies devoted solely to the research, design, manufacture, distribution, and service of leak detectors, gas handling equipment, and complete leak detection solutions. VIC is the only company in North America to offer both organically manufactured instruments and custom systems for tracer gas and air leak tests as well as gas management. VIC’s staff of engineers, system design personnel and applications specialists constitute the most experienced body of leak detection experts in the world. Vacuum Instruments Corporation (VIC) offers an unparalleled breadth of application knowledge and gas handling experience along with the fastest, simplest, and most robust leak detectors in the industry. Billions of products have been tested with VIC complete turnkey leak detection solutions, portable vacuum-type helium sniffers, general purpose helium leak detectors, as well as mass flow and pressure decay systems. We are seeking a Service Repair Trainee, who is able to be trained on how to offer a customized, service assessment approach for made to unit and systems for service, preventative maintenance, re-calibration, for the customers we serve. The Entry-Level Service Repair Trainee will perform various activities, in support of the standard leak detection systems, leak detectors and gas processing equipment that VIC designs and manufactures. We are seeking a self-starter, to begin as a trainee committed to delivering a high level of customer satisfaction, maximizes customer retention, and increases profitability, potentially growing into a full-time Service Technician (Engineer) role. The candidate will be based in our Corporate Office in Ronkonkoma, NY. Mandatory Must Haves: • 3 Years of solid prior Mechanical experience, • Electrical experience helpful, but not required, we are willing to provide training, • Willingness to eventually develop with the company and potentially be promoted into a more advanced role, which would then involve traveling, • Clean background check and Motor Vehicle Report, • Must reside on Long Island, • Maintain your own transportation Provide Entry-Level Service Repair Support in the following areas: • Provide service and customer support., • Support installations, repairs, maintenance, and test tasks., • Diagnose technical problems and determine proper solutions., • Perform preventative maintenance and repairs., • Produce timely and detailed service reports., • Document processes., • Follow all company procedures and protocols., • Communicate with technical team regarding open issues., • Comprehend customer requirements and make appropriate recommendations/briefings., • Build positive relationships with customers. Job Type: Trainee Job Type: Full-time Experience Required: • Leak Testing : 2 years (Required) Ability to Commute: • Ronkonkoma, NY 11779 (Required)

The Maintenance Technician will report directly to the Manager of Buildings and Grounds.The duties of the position shall include, but are not limited to, the following:.Perform minor electrical work including but not limited to replacing outlets, ballasts, switches, light bulbs, and working with con

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

The Maintenance Technician will report directly to the Manager of Buildings and Grounds.The duties of the position shall include, but are not limited to, the following:.Perform minor electrical work including but not limited to replacing outlets, ballasts, switches, light bulbs, and working with con

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Job Description: Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand peri

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Job Description: Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand peri

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Job Description: Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand peri

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Take your CDL-A career further!.Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading pa

HOURLY PLUS BONUS AND INCENTIVE PAY! Job Summary: Sysco has immediate job openings for dependable local CDL A Delivery Truck Driver to safely and efficiently operate a tractor-trailer and manually unload/deliver various products (meats, produce, frozen foods, groceries, dry goods, supplies, etc.Ou

Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand periods.Safely operate

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Job Description: Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand peri

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Start earning quickly with a flexible schedule.Shopping with Instacart is more than grocery delivery.Shoppers help make our world go round.They make money, make moves, and make shopping lists come true.They make good time, make life easier, and make peoples day.Shoppers make it all happensign up now

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Take your CDL-A career further!.Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading pa

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Take your CDL-A career further!.Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading pa

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Take your CDL-A career further!.Our drivers work hard to move, supply, and provide for America's favorite brands.Being reliable and dedicated to safety has defined our success as an industry leader for 130+ years.Join McLane and discover the driving difference-we provide you with industry-leading pa

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Job Description: Are you looking for a seasonal opportunity with flexible hours and competitive pay? Join our team as Seasonal Delivery Driver! We're seeking responsible and motivated individuals to ensure timely deliveries of packages, food, or retail items to our customers during peak demand peri

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

The schedule for this position is Monday-Friday; 6:30am - 3:00pm or until all deliveries are completed; rotating Saturdays.Schedules are subject to change based on business needs, and may require overtime.Drive a box truck under 26,001 pounds or other vehicles during one of our many routes while mak

The compensation range provided is in compliance with state specific laws.Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors.You may be eligible to participate in the Company's Incentive Plan.For information on Syscos Ben

Start your day at our Tonawanda warehouse for vehicle loading.Deliver packages safely and efficiently throughout Buffalo area.Navigate pre-planned delivery routes using provided technology.Provide excellent customer service at every delivery.Load and unload packages (up to 50 lbs).Return to warehous

Our Drivers are the company representatives that interact with our clients daily.Candidates must have excellent customer service skills.Parts Authority is one of the fastest growing Supply Chain companies in the Country.We offer promotable career advancement and job stability- 50 years old and GROWI