Construction & Trades jobs in San Bernardino, CaliforniaCreate job alerts

Job Description Job Title: General Laborer 2nd Shift 2:30pm- 11pm Job Description This general labor position focuses on performing quality inspections on door hardware components produced by machines. You will visually inspect parts, take measurements, accurately count items, and document inspection results to ensure products meet established quality standards. Responsibilities • Perform visual quality inspections on door hardware pieces produced by machines., • Use measuring tools, including a tape measure, to verify product dimensions and specifications., • Accurately count parts and record quantities in logs or on required documentation., • Document inspection findings clearly and legibly according to established procedures., • Identify and separate defective or nonconforming parts based on inspection criteria., • Maintain a clean and organized work area to support efficient production and inspection., • Follow all safety guidelines and standard operating procedures while working on the production floor., • Sit or stand for extended periods while performing repetitive inspection and counting tasks., • Work collaboratively with production and inspection team members to meet quality and output goals. Essential Skills • Experience performing general labor or production work in a manufacturing or similar environment., • Ability to use a tape measure accurately for basic measurements., • Basic quality control skills, including visual inspection and measuring., • Strong attention to detail to identify defects and ensure accurate counts., • Ability to sit or stand for long periods of time while performing repetitive tasks., • Capability to complete basic documentation and record inspection results clearly. Additional Skills & Qualifications • Previous experience as a production worker or inspector in a hardware or manufacturing setting., • Comfort working in a small team environment., • Reliability and consistency in following established procedures and quality standards. Why Work Here? You will join a small, close-knit team where your attention to detail and reliability directly contribute to the quality of the final product. The environment offers the opportunity to develop hands-on experience in quality inspection and production, with clear procedures and expectations that support success in the role. Work Environment This role is based in a small hardware production facility with a team of approximately nine people. The work is performed on-site in a production and inspection area, requiring extended periods of sitting or standing while inspecting, counting, and documenting door hardware pieces. The facility operates on a 1st and 2nd shift schedule, and you will work closely with a tight-knit team in a structured, task-focused environment. Job Type & Location This is a Contract to Hire position based out of Fontana, CA. Pay and Benefits The pay range for this position is $22.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fontana,CA. Application Deadline This position is anticipated to close on Jul 15, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description --Come be an essential worker at E-Z Mix Inc.-- Interested candidates can complete an application onsite from 07:00am to 04:30pm Monday through Friday at: 3355 S. Industrial Dr. Rialto, Ca 92316 • please make sure to sign and date all of application and include job history or resume. General Plant Laborer Position Responsibilities: Perform a range of physical/manual labor duties including, but not limited to, equipment maintenance, pallet repair, loading and unloading, and other miscellaneous labor work as needed (including repetitive lifting and moving of 80+ pound objects). Perform general clean up around Plant, and maintains appearance of equipment. Completes visual and daily safety inspection of equipment to ensure safe operations. Other duties as assigned by Plant Management. Education: Other Related Experiences Required or Preferred: Minimum of one year of related experience or equivalent combination of education and experience. Ability to read, write and speak English. Must have the ability to understand and abide by Company policies and safety rules. Bilingual English/Spanish is highly preferred but, not required. Experience working in the building materials industry is preferred. · Must have the physical stamina to perform continuously with full body motion for climbing, reaching, pushing and lifting, etc. · Constant- Seeing, carrying, gripping objects under 20lbs. · Frequent- Bending, reaching, sitting, lifting objects under 20lbs. · Occasional- feeling, climbing, balancing, hearing, stooping, standing, walking, driving, twisting, hand tools. Pushing and pulling objects under 20 lbs. Carrying, lifting, pushing, pulling items from 20 lbs up to 94 lbs. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. E-Z Mix offers a competitive salary and excellent benefits. E-Z Mix is an Equal Opportunity Employer. Company DescriptionEstablished in 1995, E-Z Mix, Inc. is the leading producer of preblended, cementitious products in Southern California. Offering a full line of reputable products, from Spec Mix© masonry mortars to Riverside and CPC Cements, E-Z Mix prides itself in providing excellent customer service with a knowledgeable staff ready to assist you with any of your masonry needs.Established in 1995, E-Z Mix, Inc. is the leading producer of preblended, cementitious products in Southern California. Offering a full line of reputable products, from Spec Mix© masonry mortars to Riverside and CPC Cements, E-Z Mix prides itself in providing excellent customer service with a knowledgeable staff ready to assist you with any of your masonry needs.

Job Description Estamos contratando personal para bodega de ropa en Colton! *Labor general, empacando, paletizando,carga y descarga de contenedores. • $16.90 por hora. *Lunes a Viernes 6am-2:30pm

Job Description Commercial Windshield Repair Technician Join the Save-A-Shield Team – Where Quality Meets Care At Save-A-Shield, we take pride in delivering precision, professionalism, and top-tier customer service. With over 40 years of industry experience, our reputation is built on excellence—and we’re looking for motivated individuals to join our growing team. We focus on repairing windshields, so replacement is not required. As a Professional Windshield Repair Technician, you’ll service our customers by discovering, assessing, and repairing windshield damage on fleet vehicles. You’ll represent the company by ensuring every repair meets our high standards and every customer receives the level of service Save-A-Shield is known for. What We Provide · All tools and uniforms provided at no cost · Competitive starting pay: $18-$20/hr · 90-day performance review/raise · Annual performance-based wage increases · Mileage reimbursement: 62.5¢ per mile · Comprehensive paid training program · 401(k) retirement plan · Health, dental, and vision insurance options · Paid holidays and paid sick time (PST) What You’ll Do · Travel your assigned route to service existing customers · Assess windshield damage and perform high-quality repairs · Communicate clearly with customers, co-workers, and management · Represent Save-A-Shield with professionalism and integrity What We’re Looking For · Strong communication and customer service skills · Fluent in spoken and written English · Ability to work independently and outdoors · Cell phone with text capability · Strong attention to detail and hand-eye coordination What is Required · Valid Driver’s License · Reliable personal vehicle with valid insurance and registration · High school diploma or GED required At Save-A-Shield, we believe that our employees are the heart of our success. We invest in each team member through hands-on training, ongoing support, and opportunities for professional growth. Our goal is to create an environment where every employee feels valued, respected, and confident in their skills. When you join our team, you’re not just starting a job — you’re becoming part of a family-run company built on integrity, trust, and a commitment to excellence. We take pride in recognizing hard work, rewarding dedication, and fostering a positive culture that encourages open communication and collaboration across all levels. If you take pride in delivering quality workmanship, enjoy learning new skills, and want to build a long-term career with a company that truly cares about your success, we’d love to welcome you to the Save-A-Shield family. Company DescriptionOur Save A Shield process has been the industry standard for over 35 years and we are a founding member of the NWRA in the early ’90s. Today, the NWRA is the most credible source for nationally recognized windshield crack repair standards. After excessing development and decades of testing, we offer the most permanent and cosmetically perfect windshield crack repair. Our glass repair is done with the touch of the hand, not with a machine. We do not use gauges to determine when the job is done. Consequently, we provide a higher standard in glass repair.Our Save A Shield process has been the industry standard for over 35 years and we are a founding member of the NWRA in the early ’90s.\r\n\r\nToday, the NWRA is the most credible source for nationally recognized windshield crack repair standards. After excessing development and decades of testing, we offer the most permanent and cosmetically perfect windshield crack repair. Our glass repair is done with the touch of the hand, not with a machine. We do not use gauges to determine when the job is done. Consequently, we provide a higher standard in glass repair.

Job Description The General Laborer will support daily operational activities by performing physical tasks such as handling materials, loading, and unloading goods within a medium-sized team environment. This role requires adherence to safety standards and the ability to manage manual labor efficiently to maintain workflow. Responsibilities • Handle and transport materials safely and efficiently, • Load and unload shipments accurately, • Maintain compliance with safety protocols at all times, • Perform various manual labor tasks to support team operations Preferred Qualifications • At least 1 year of experience in general labor roles, • Must know how to use a Hammer, • Must be able to lift up to 50 lbs, • Must be able to stand / walk for long periods of time This position is to start Monday 7/6/26 @ 4am -12:30pm Company DescriptionStaffing Provider.Staffing Provider.

Job Description Attention, Inland Empire! Looking for a new job? Join iStaffing Rialto at our Job Fair this Wednesday from 9:00 AM to 4:00 PM! ✅ Multiple job openings ✅ On-the-spot interviews ✅ Immediate opportunities available See the flyer for the location and additional details. Don't miss this opportunity to start your next career. We look forward to seeing you there! Company DescriptionAttention, Inland Empire! Looking for a new job? Join iStaffing Rialto at our Job Fair this Wednesday from 9:00 AM to 4:00 PM! ✅ Multiple job openings ✅ On-the-spot interviews ✅ Immediate opportunities available See the flyer for the location and additional details. Don't miss this opportunity to start your next career. We look forward to seeing you there!Attention, Inland Empire! \n\nLooking for a new job? Join iStaffing Rialto at our Job Fair this Wednesday from 9:00 AM to 4:00 PM!\n\n✅ Multiple job openings\n✅ On-the-spot interviews\n✅ Immediate opportunities available\n\n See the flyer for the location and additional details.\n\nDon't miss this opportunity to start your next career. We look forward to seeing you there!

Job Description We are looking for Finish Carpenters, someone whom knows what parts make a cabinet. Someone whom can assemble cabinets off simple prints. Someone who Know Euro style and Face Frame Cabs, individuals with basic tool knowledge. Must have Basic hand tools, reliable transportation, valid D.L, valid insurance, must pass background and Drug test. Company DescriptionWe provide all levels of millwork from repairs due to flood damage up to full custom cabinetry and trim work. We provide both residential and commercial work and hold the highest quality in standards and professionalism when on or projects for our customersWe provide all levels of millwork from repairs due to flood damage up to full custom cabinetry and trim work. We provide both residential and commercial work and hold the highest quality in standards and professionalism when on or projects for our customers

Job Description Overview Trailer Technician/Mechanic – San Bernardino, CA $30.00 - $35.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Trailer Technician/Mechanic to join our team in San Bernardino, CA. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $30.00 – $35.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Day to day Time to Time Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on trailers, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 2+ years’ of hands-on experience performing class 7 - 8 trailer maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #TrailerMechanic #NowHiring #TrailerTechnicianCareer #MechanicJobs #TrailerTechnician INDCD

Job Description TCI RENTAL AND LEASING – If you are a Diesel Mechanic with an expert touch and attention to detail, WE WANT YOU! We are looking for Diesel Mechanics with 2 to 3+ years' Experience - $29.51 to $34.01 an hour depending on skills and experience Shift - Start time 8:30am to 5:00pm Monday through Friday Key Skills: Diagnose and trouble shoot with laptop Suspension and steering components Brake replacement Tire dismount and mount. 90 day dot inspection Preventative maintenance Transmission service Electrical diagnostics Level Up Has Launched! New Career Growth Program for Diesel Technicians We're excited to introduce our Level Up Program, our new initiative designed to help diesel technicians take their careers to the next level. Through personalized career path planning, skills development, and support for training and certifications, Level Up empowers our team to grow, succeed, and thrive—right here at TCI. Apply now and we can schedule your in-person interview and show you around our shop while getting to know each other! https://careers.tcitransportation.com/ Minimum Requirements 2 to 3+ years Diesel Engine Repair Must possess a valid driver's license and meet insurability Self-motivated & Leadership skills Benefits: Weekly Paychecks / Direct Deposit Available Safety Incentives up to $300 Quarterly upon meeting requirements Medical, Dental & Vision Coverage / Critical Illness Insurance Employer Paid Life and AD&D Insurance 401K with Company Match Holiday Pay Employee Discount Programs Uniforms provided Yearly Boot Allowance About Us: We are a family-owned company doing business since 1978. We are dedicated and committed to safety, each other, and our customers. Our team is positive and passionate and come to work each day with a "Can Do" attitude. We strive to be creative problem solvers who bring innovative thinking in all our work. Being ethical, transparent, and accountable has helped shape our team and how we do business. We are looking for more people that match our core values to join our team.

Job DescriptionBenefits: • Competitive salary, • Employee discounts, • Paid time off Company Overview At Tire Pros we value each employee and encourage growth. We provide a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Start your exciting new career with a strong and stable company. Benefits and Perks • Excellent Training and Development, • Competitive Compensation, • Friendly Work Environment Job Summary Lead Automotive Service Technician is responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work. Great growth and career opportunities. Responsibilities • Examines customer vehicles, • Identifies necessary vehicle repairs and maintenance to include drivability issues, • Estimates cost of repairs, • Performs vehicle repairs and maintenance to include air conditioning repairs, • Documents services performed, • Requests necessary parts, • Follows Safeguards rules and regulations Desired Qualifications • 3+ years of automotive technician experience, • Working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, AC equipment, etc., • A motivation to learn and succeed, • Valid in-state driver's license with good driving record, • Ability to read and comprehend instructions and information, • Preferred Experience:, • Preferred certification UTI, NASCAR or ASE certification, • Knowledge of vehicle mechanical operations

Job Description Summary: We are currently seeking an experienced Estimator with a strong understanding of HVAC and mechanical systems to join a well-established, employee-owned company offering long-term stability and an ESOP program. The ideal candidate will have experience preparing competitive estimates and managing accounts from job walk through closeout. While multifamily project experience is preferred, candidates with commercial experience will also be considered. Sales experience and prior client account management are highly desirable. Key Responsibilities: Review mechanical plans and project documentation to generate accurate labor and material takeoffs Prepare bids, pricing, and proposals for HVAC and mechanical scopes Coordinate with internal departments and subcontractors to gather project-related data Track estimate details, contract extras, and change orders using Excel and estimating software Communicate regularly with clients, GCs, and field teams to ensure scope clarity and pricing alignment Maintain organized records of all estimating activities Support business development efforts by maintaining relationships with clients and industry partners Manage awarded accounts as needed and stay involved through project handoff Qualifications: 5+ years of experience in HVAC or mechanical estimating (required) Prior experience in HVAC service or mechanical sales (preferred) Proven ability to manage client accounts and maintain repeat business Proficiency in Microsoft Excel and basic accounting tools Ability to read and interpret mechanical drawings and construction specifications Excellent communication and organizational skills Additional Information: Location: Based in Southern California (Local candidates preferred) Industry Focus: HVAC, mechanical, and piping scopes Project Types: Multifamily preferred, commercial acceptable Employee-Owned Company with ESOP participation Competitive compensation with opportunities for long-term growth

Job Description At Socal Mobile Fleet: we believe that our Diesel Mechanics are the meat & potatoes of our company. We take pride in customer satisfaction and know that we have our hard-working employees to thank for that. We believe in having repairs/maintenance done right the first time and we trust that our Mechanics are not just throwing parts at Tractors/Trailers. We provide our Diesel Mechanics with their own workspace where they can show off their skills, knowledge and talents. SoCal Mobile Fleet is up to date on all diagnostic software. Our Diesel Mechanics have the ability for growth and movement within our company. We offer competitive pay, as well as benefits and pay raises based on performances. We know that hard work pays off, and we are interested in hard working likeminded individuals to join our growing team. We have two locations in Fontana (we do not do mobile currently) and serve outside customers as well as work closely with dealerships in our local area. Our reputation is what we take pride in. Building relationships with every customer that enters our lot is of great importance to us. Word of mouth and continued business is what keeps our doors open. Working with the local dealerships is a huge deal with how reputable our company is, and we continue to raise the bar on our customer service and workmanship. Compensation: Based on experience, training, and/or certifications. We want to reward you for your education and dedication to this trade. We offer: • Uniforms provided, • Full-Time schedule 8am-5pm, • Weekly Pay, • Large, enclosed bays with cooled air and fans during hot months. A comfortable workplace is a productive workplace., • • We offer exceptional compensation, low-cost benefits (company pays half of health, dental and vision), 401K, PTO, incentives/bonuses for performance, and opportunity for advancement - all in a environment that appreciates and rewards excellence, a positive attitude and integrity. Hard work pays off! • • You will be able to build a successful career, receive competitive wages, have growth opportunities, and receive benefits. You will be recognized & rewarded! As a Diesel Mechanic with us you will make an impact in the following ways: (Position Responsibilities may include, but not limited to) • Complete troubleshooting, repairs and rebuilds on Tractors., • Complete troubleshooting, repairs on Trailers, • Perform preventative maintenance based on assessment of engines, including utilizing •computers/software in the process of diagnostic work., • Apply documented procedures and policies to complete complex repairs, including identifying and preparing required parts and tools., • Completing required documentation, such as work orders documents., • Completing all work on order but not limited to finding other issues on unit that were not noted. Inform service writer of additional issues, repairs to be made that were found., • Listing all parts and fluids used on work orders. · Understanding and comprehension of computer diagnostic software’s. · Adhere to all our relevant Health, Safety & Environmental policies, procedures and legislation and reports any issues / incidents to their supervisor. · Maintain a clean, safe and organized work area. While adhering to the company, local, state & federal policies and regulations as well as OSHA standards and requirements. · Diagnose, rebuild and repair fleet diesel equipment (tractors, trailers, and related parts) · Performs DOT inspections and repairs. · Complete preventative maintenance and standard vehicle maintenance · Complete thorough documentation for work orders of repairs and preventative maintenance · Diagnoses complex mechanical and electric problems utilizing diagnostic technology/software when applicable. · Completes complex and detailed mechanical inspections and repairs with minimal supervision. · Replaces defective components as instructed. · Identifies root cause of failures/conditions and perform repairs as required. · Train other employees, act as a mentor · Other projects or duties as assigned. Joining our team expect you: • Must provide own hand tools & toolbox. · Have 2 years of hands-on experience in heavy duty diesel mechanics. · Be a leader, with integrity. · Willingness to be productive and attentive on a daily basis. · To be just as excited to be on our team as we are to have you. · Work closely with service writer/office employees with part ordering, issues with units and productivity. · Pay attention to detail. · Full understanding and comprehension of filling out work orders and completion of them. Insure they are turned in upon completion of unit. · Be organized and clean in your work area. · Must have valid Driver's License. Physical Requirements & Working Conditions: • LIFTING REQUIREMENTS: Frequently lifting 50 pounds. Anything over 50 pounds, is lifted with assistance., • Carrying - Occasional - Weight 50 lb., • Pushing - Occasional - Force 100 lb., • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions About SoCal Mobile Fleet Services https://socalmobilefleet.com SoCal Mobile Fleet Services is a fast-growing company that provides work to many large fleet & individual customers. We also work with local dealerships. We have 2 locations in Fontana, one at our large shop and the other at one of the dealerships. We are a comprehensive single-source fleet service maintenance provider, we offer clients unprecedented economies of scale, bottom-line value, visibility and control, continuous improvement and exceptional work. We strive to carry out the most exceptional service both in office and shop. The footprint and services we provide raise the bar and set a standard in the Fleet Maintenance Industry. We pride our business on providing highly effective reduced costs and repair and maintenance efficiencies.

Job Description Pay: $25.00 - $36.00 per hour Work Schedule: • Friday-Monday 6:00AM-4:30PM Minimum Qualifications: • Experience in a mechanic role, specifically with large trucks and trailers., • Welding experience is mandatory., • Proficient in air brake systems and electrical components., • Diesel truck experience is mandatory. Are you an experienced mechanic with a passion for working on large trucks and trailers? If so, we have an exciting opportunity for you! We are currently seeking a Trailer Mechanic who will be responsible for diagnosing, repairing, and maintaining a variety of trailers in our fleet. Your expertise will be crucial in keeping our equipment roadworthy and ensuring the safety of our drivers. Key Responsibilities: • Perform routine maintenance and repairs on trailers, ensuring compliance with safety standards., • Diagnose and troubleshoot mechanical issues related to trailer and diesel truck components., • Fabricate and assemble parts as necessary for repairs., • Utilize hand tools, power tools, and diagnostic equipment to complete repairs efficiently., • Conduct thorough inspections on trailers to identify and address potential issues before they escalate., • Maintain accurate records of services performed and parts used., • Provide exceptional customer service by effectively communicating with clients regarding repairs and maintenance needs., • Safely operate forklifts to move trailers and equipment as needed., • Solder electrical components as required for repairs or upgrades., • Collaborate with other mechanics and technicians to ensure timely project completions. Requirements: • Proven experience as a Service Technician or in a similar role, specifically in trailer or diesel engine repair., • Proficiency in using hand tools, power tools, and diagnostic equipment., • Strong problem-solving skills with the ability to accurately diagnose mechanical issues., • Familiarity with fabricating and assembling parts for various trailer components., • Excellent customer service skills with the ability to clearly communicate technical information to clients., • Ability to work independently as well as part of a team in a fast-paced environment., • Knowledge of suspension systems and their maintenance is preferred., • A valid driver's license is required; additional certifications related to mechanics are a plus.

Job Description PeopleReady of San Bernardino, CA is now hiring Temp to Perm Diesel Truck Mechanics in San Bernardino, CA! As a PeopleReady associate you'll benefit from: • Connections and experience with some of the top companies in your area, • Great benefit package options, • Get matched to jobs quickly., • Competitive pay and steady schedule, • The ability to see your schedule and track your hours right from our easy-to-use app, JobStack! Pay Rate: The pay rate for this job is $20 - $20 / hour* What you'll be doing as a Diesel Truck Mechanic: • Perform routine maintenance services including oil changes, filter replacements, tire rotations, and fluid check, • Diagnose mechanical, electrical, hydraulic, and electronic issues using diagnostic tools and equipment, • Repair and replace components such as engines, transmissions, brakes, steering systems, suspensions, and driveline parts, • Conduct vehicle inspections and identify safety concerns or potential failures Available shifts: Shift Timings: 1st Shift (Day) Job requirements: • Applicants must be at least 18 years of age to be considered for employment with PeopleReady, • 2+ years of experience as a truck mechanic, diesel technician, or fleet maintenance technician, • Strong Knowledge of medium- duty truck systems and components, • Ability to lift up to 75 pounds and perform physically demanding work, • Resume Required, • Background Check Required Ready to take control of the way you work? Complete our application to join the PeopleReady team today. Please contact our San Bernardino, CA branch for more information: Branch # 1567 Address: 444 S. Waterman Avenue, Suite A & B, San Bernardino, CA 92408 A criminal background check may be required. Criminal convictions do not necessarily disqualify an applicant from consideration for a position. An individual assessment of an applicant's prior criminal convictions will be made before excluding an applicant from consideration.We will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Ordinance No. 184652. If you need more information, or wish to report violation of this ordinance, please contact the Department of Public Works (DAA), Bureau of Contract Administration. *Hourly pay rates are a good-faith estimate based on factors such as relevant skills, experience, education, training, geographic location and other considerations permitted by law. An employee's pay history will not be a contributing factor where prohibited by local law. Applications are accepted on an ongoing basis unless a deadline is otherwise stated. Employees and their eligible dependents are offered Medical/Dental/Vision insurance and short-term disability. More details about our benefits can be found by copying and pasting this URL into your browser: https://flimp.live/TrueBlueAssociates. PeopleReady considers all applicants for employment regardless of background, in compliance with applicable laws regarding fair hiring practices. PeopleReady is an equal opportunity employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristics protected by law. We consider qualified applicants with arrest and conviction records in accordance with applicable law. TrueBlue, Inc. and its brands welcome and encourage applications from candidates with disabilities. Accommodations are available on request for candidates taking part in the selection process. If you require disability-related accommodation during the recruitment process, please contact your Recruiter or Employee Relations. TrueBlue, Inc. and its brands will consult with all applicants who request disability-related accommodation during the recruitment process to ensure that the accommodation provided takes into account the applicant's individual accessibility needs. Company DescriptionAt PeopleReady, we make a difference: PeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers’ businesses is something that we’re incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can’t wait to meet you. Our global impact: Our game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020. PeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.At PeopleReady, we make a difference:\r\n\r\nPeopleReady is an industry-leading general and skilled labor staffing provider for retail, manufacturing, warehousing, logistics, energy, construction, hospitality, and other industries. The daily impact that we have on the lives of job seekers and our customers’ businesses is something that we’re incredibly proud of. Our team operates by one motto: We Are Ready. Ready to make a difference, ready to change lives through work and ready to win. Are you ready to join us? Apply today. We can’t wait to meet you.\r\n\r\nOur global impact:\r\n\r\nOur game changing JobStack platform fills a job every 9 seconds and has filled over 7 million shifts since its inception. Through JobStack and our network of 600 branch offices across all 50 states, Puerto Rico and Canada, we serve more than 98,000 businesses and put more than 221,000 people to work in 2020.\r\n\r\nPeopleReady is part of TrueBlue, Inc. (NYSE:TBI), a leading provider of specialized workforce solutions, helping clients improve growth and performance by providing staffing, recruitment process outsourcing and managed service provider solutions. In 2020, TrueBlue connected approximately 490,000 people with work.\r\n\r\nWe are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law.

Job Description Cryogenic Trailer / Tank Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for tanker and trailer mechanics with cryogenic experience! Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM. This position is for our Bloomington, CA branch at 225 West Slover Ave. Pay Range: $22.00 to $42.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a cryogenic trailer., • Trailer suspension installation and repair, • Strong ABS maintenance skills, • Tank service and repair Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description**Mobile Diesel Technician at Transwest Mobile **Ready to Lead the Way? Join Transwest Mobile! At Transwest Mobile, we’re innovators and problem-solvers, delivering top-tier mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. We’re seeking skilled technicians with a passion for excellence to join our dynamic team. If you’re ready to take on more responsibility, solve complex challenges, and grow with us, let’s connect! What You’ll Do • Perform advanced maintenance and repairs on heavy-duty diesel engines, hydraulics, electrical systems, and farm machinery., • Diagnose complex mechanical issues using advanced diagnostic tools and service manuals., • Execute both scheduled and unscheduled repairs with minimal supervision, ensuring safety and performance standards., • Operate cranes and specialized equipment to support repair and maintenance tasks., • Communicate clearly with customers, providing detailed service recommendations and updates., • Maintain accurate, detailed records of all repairs and maintenance activities., • Mentor entry-level technicians and collaborate with teams to enhance service delivery., • Stay current on industry advancements and apply expertise to improve repair processes.What You Bring, • High school diploma or GED., • 5+ years of hands-on experience with diesel engines, hydraulic, or electrical systems., • Advanced knowledge of diagnostic tools and service manuals., • Strong troubleshooting skills and ability to work under pressure in fast-paced settings., • Ability to provide own tools suitable for the job., • Capability to prioritize and multitask effectively., • Valid driver’s license and ability to drive a company vehicle (mobile role)., • Ability to pass background checks., • Ability to lift 50+ pounds and work in indoor/outdoor environments.Preferred Qualifications, • ASE certifications or OEM-specific training (e.g., Freightliner, Detroit, Cummins)., • Experience with field service or mobile repair., • Strong communication and customer service skills., • Proven customer-facing experience or project leadership on job sites.Why Transwest Mobile?, • Impactful Work: Tackle challenging repairs to keep critical equipment operational., • Growth Opportunities: Work with industry leaders like Cummins, Eaton, and Ford, and mentor others., • Supportive Culture: Join a team that values innovation, collaboration, and your expertise., • Top Benefits:- Health, Vision, and Dental Insurance- 401(k)- Health Savings Account with Company Match, • Life and Disability Insurance, • Holidays and Paid Time Off, • Referral Bonus Program, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, uniforms, and cleaning provided, • Company vehicle for mobile rolesAbout Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Step Up? Apply now to join a team that values your skills and pushes the industry forward. Let’s keep fleets moving together! Visit transwestmobile.com Equal Opportunity Employer Transwest Mobile Truck Repair is an equal opportunity employer and value diversity at our company. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. Employment may be contingent upon successful completion of a background check and/or drug screening, where permitted by law. We are committed to providing reasonable accommodations to qualified individuals with disabilities and to individuals with sincerely held religious beliefs, in accordance with applicable law. You should be proficient in: • Troubleshooting Skills, • Electrical Systems Diagnostics & Repair, • Vehicle Electronics & Computer Controls, • Diesel Engine Systems, • Brake & Suspension Systems, • Preventive Maintenance & Inspection, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Repair, • Suspension and Steering, • Brakes, • Tire Service

Job DescriptionAbout C.R. England, Inc.Founded in 1920, C.R. England, Inc. is headquartered in Salt Lake City, UT and is one of North America’s premier transportation companies. C.R. England is an industry leader in Dedicated, Over-The-Road, cross-border Mexico, and Intermodal services.C.R. England has also been regularly recognized for management excellence. This year, C.R. England was recognized by Newsweek as one of ‘America’s Greatest Workplaces for Women’, one of only three truckload carriers to receive this recognition, and ‘America’s Greatest Workplaces for Diversity’ one of only seven truckload carriers to be so recognized. Additionally, C.R. England was honored with a ‘2020 Glassdoor Top Places to Work’ award, the ‘Achievers 50 Most Engaged Workplaces™ Award’ and by Deloitte Private and The Wall Street Journal as a ‘2021 US Best Managed Company’.Committed to giving back the community, learn more about C.R. England Inc.’s goal of providing one million meals to children annually through partnerships with local food banks by visiting www.oneagainstchildhoodhunger.com. Position: Fleet Mechanic Location: Colton CA Pay:$33.00 - $36.00/hr ATTENTION EXPERIENCED DIESEL MECHANICS: If you want to build a stable career with an industry leader that provides: • $5,000 experience bonus, • A safe, clean, and organized shop,, • Free uniform and laundry service, including jackets,, • Reimbursement for boots and safety glasses (including prescriptions safety glasses),, • Annual safety bonuses, and, • Generous employee referral bonuses... C.R. England has an amazing career opportunity for you! We are growing and offering qualified and experienced new hires a $5,000 signing bonus paid during the first year of employment. (Some restrictions may apply. Signing bonus may not be available to all candidates. Manager or recruiter can provide additional details.) Why work for C.R. England?, • Great Compensation & Benefits!, • Weekly pay, vacation, a floating holiday, medical, dental, life, vision, 401K, and more, • Free uniform and laundry service, including jackets, • Reimbursement for boots and safety glasses (including prescriptions safety glasses), • Annual safety bonuses, • Generous employee referral bonuses., • Great Facilities!, • Tractor lifts., • T-8 lighting throughout all bays and isles., • Locker rooms w/ showers., • Break rooms., • Bulk fluid delivery systems available to all repair bays., • Clean DPF’s with FSX Machines (we clean our own)., • Open parts rooms., • Great Equipment! Our tractor fleet of 4,000+ Daimlers consisting of: • Cascadia tractors with DD15’s and DT-12 automated transmissions., • Western Stars with DD15’s and DT-12 automated transmissions., • Our fleet of 8,800 trailers consisting of:, • Utility and Wabash trailers., • Thermo King and Carrier refrigerated units., • TempStack intermodal containers., • Dry Van Trailers with Dura-Plate., • Our generous tool supply, laptops, and diagnostic software., • Great Career Path! - Personal and professional development through C.R. England University., • Safety training., • Self-paced on-line training., • Leader led training., • Hands-on training., • Career Path Planning and Individual Development Plans. Job qualifications may include, but not limited to: • General knowledge of EGR/emissions control systems, foundation, air, and ABS brake systems, and DC electrical systems., • Understand the importance of diagnosis and repair versus parts replacement. - Basic computer knowledge with good written communication skills., • Ability to read and understand repair manuals and complete/fill tags and repair orders., • Experience with Freightliners or Detroit engines a plus. - Excellent customer service skills., • Be 18 years of age or older., • High School Diploma or GED., • Graduation from trade or technical school., • Substantial diesel technician experience or heavy duty military mechanic experience with tanks, LAVs, or 5-ton vehicles can take the place of trade school., • Must provide your own roll-a-round storage and hand-tools. Job requirements may include, but not limited to: • Troubleshoot, diagnose, and perform preventative maintenance and repairs on tractor systems including diesel engines, transmissions, brakes, HVAC, satellite/cellular systems, electrical, suspension, and tires., • Utilize computer systems (TMT, TMW, and internet) to accurately create, track, and complete work order repairs including the tracking of time (labor hours), parts used, work completed, and locate technical information as required., • Move equipment on and off the safety lane and around the yard., • Perform proper safety protocols and procedures, including use of protective equipment, and maintain a safe work area in accordance with company policy., • Provide superior customer service to drivers., • Maintain a positive work atmosphere by acting and communicating in a positive, collaborative, efficient, service-oriented manner., • Perform additional duties as assigned by leadership., • Other duties as assigned. C.R. England 2025 C.R. England is an equal opportunity at will employer and does not discriminate against any employee or applicant for employment because of age, race, religion, color, disability, sex, sexual orientation or national origin.

Job DescriptionDescription: JOB DESCRIPTION DIESEL SERVICE TECHNICIAN Department: Fleet & Maintenance Location: Bloomington, CA Office Hours/Days: 0700 - 1630 (M-F) Classification: Full-Time, Non-Exempt Reports To Shop Manager Position Summary Ecology Auto Parts, Inc. is seeking a Diesel Service Technician to support operations at our Bloomington, CA location. This role is a hybrid position responsible for performing intermediate-level diesel mechanical service and commercial tire repair in a fast-paced, industrial shop environment. The Diesel Service Technician plays a critical role in maintaining the safety, reliability, and operational readiness of fleet vehicles and equipment. The ideal candidate possesses hands-on diesel service experience, strong mechanical aptitude, and working knowledge of commercial tire systems. This position requires independence, attention to detail, and the ability to execute preventative maintenance and repairs while supporting shop efficiency and operational uptime. Responsibilities • Perform diesel service and intermediate-level mechanical repairs including brakes, suspension, steering components, belts, hoses, batteries, and basic drivability concerns., • Conduct commercial tire services including mounting, dismounting, balancing, repairing, rotating, and replacing tires on diesel trucks, trailers, and applicable fleet equipment., • Perform preventative maintenance services such as oil changes, fluid inspections, filter replacements, and multi-point vehicle inspections., • Diagnose mechanical and tire-related issues using visual inspections, service documentation, and basic diagnostic tools., • Accurately document repairs, labor, and parts usage in work orders or electronic maintenance systems., • Inspect vehicles and equipment for safety concerns and report deficiencies to shop leadership promptly., • Maintain a clean, organized, and safe work area in compliance with company safety standards and OSHA regulations., • Assist with inventory control related to tires, parts, tools, and shop supplies., • Coordinate with service writers, shop management, and operations staff to support efficient workflow and job prioritization., • Follow all environmental, safety, and operational policies and procedures., • Participate in continuous improvement efforts related to shop efficiency, service quality, and safety performance., • Perform additional duties and projects as assigned based on operational needs. Requirements: Qualifications/Knowledge/Critical Skills • High school diploma or equivalent required., • Minimum of 2–4 years of hands-on diesel service or heavy-duty vehicle maintenance experience., • Demonstrated experience with commercial tire service and repair., • Working knowledge of diesel vehicle systems including braking, suspension, steering, and preventative maintenance., • Ability to safely operate tire machines, balancers, hand tools, power tools, and standard shop equipment., • Strong mechanical aptitude with attention to detail and quality workmanship., • Ability to read and follow work orders, service procedures, and safety guidelines., • Ability to work independently while contributing effectively in a team environment., • Reliable attendance, strong work ethic, and professional attitude., • Valid driver’s license required; clean driving record preferred., • ASE certifications, air brake knowledge, or CDL experience are a plus but not required. Physical Demands/Environmental Factors • Regularly required to stand, walk, bend, kneel, reach, and use hands and arms for extended periods., • Frequently required to lift and/or move objects weighing up to 75 pounds., • Work is performed in a shop and yard environment with exposure to noise, dust, grease, weather conditions, and industrial equipment., • Specific vision abilities required include close vision, distance vision, depth perception, and the ability to adjust focus. Compensation The Diesel Service Technician position offers an hourly compensation range of $25.00 to $40.00 per hour, dependent upon experience, skill level, and qualifications. Ecology Auto Parts, Inc. provides a comprehensive benefits package for eligible employees, which may include medical, dental, and vision insurance, a 401(k) plan with employer matching, paid time off, and additional benefits in accordance with company policy. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions. Acknowledgement Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Candidate/Employee Name (Print): Candidate/Employee Signature: Date:

Job Description Minimum 5 Years Experience We are seeking a Estimator – Structural Concrete Storm Drain Pipeline (5+ Years Min Exp) with extensive experience in storm drain structures, underground utilities, and pipeline construction to join our team. This position is responsible for leading the estimating process, managing projects from bid through completion, and providing leadership to project staff to ensure projects are delivered safely, on schedule, and within budget. Responsibilities • Preparation of detailed project estimates for underground utility, storm drain, and pipeline projects., • Review plans, specifications, soil reports, and aerial imagery (e.g., Google Earth) to identify potential project risks and constructability issues., • Analyze geological and soil reports and coordinate with engineering and field teams to address potential challenges., • Perform comprehensive quantity takeoffs and input data into estimating software such as Hard Dollar, BLUE BEAM, • Review and respond to RFIs, resolve discrepancies, and clarify scope requirements during the bidding process., • Prepare complete bid proposals and supporting documentation for review by company Owner., • Develop and oversee project schedules, cost controls, and project budgets., • Review contracts, identify risk exposures, and assist in negotiating contract terms when necessary., • Coordinate with superintendents, Foreman’s, Lead’s, subcontractors, and vendors throughout the bidding and construction phases., • Monitor project performance to ensure deadlines, safety standards, and cost targets are achieved., • Manage change orders, cost tracking, and project forecasting., • Compile and present project status reports and cost analysis to company leadership. Qualifications · Must have experience figuring STRUCTRUAL concrete and rebar. not necessarily Storm Drain but if so that is better (retaining walls, foundations, parking structures, bridges. · Must have experience using a name brand estimating software · Must be able to read plans and standards • Minimum 5 years of experience in project management and estimating for underground utilities, storm drain, or pipeline construction., • Strong experience with storm drain systems, structures, pipelines, and underground utility infrastructure is a plus., • Proficiency in construction software including CMS, Viewpoint, Hard Dollar, and Microsoft Office (EXCEL IS A MUST)., • Proven ability to manage multiple projects simultaneously., • Strong leadership, decision-making, and communication skills., • Excellent analytical, problem-solving, and cost-control abilities., • Highly detail-oriented with strong organizational skills., • Valid driver’s license required., • High school diploma or equivalent required (construction management or engineering education preferred).

Job Description We are looking for a DIESEL MECHANIC to join our team! You will be responsible for repairing various semi-trucks and transmission systems. Responsibilities: • Repair trucks and trailers, install truck tires., • Perform routine truck maintenance and DOT inspections., • Use diagnostic tools to test truck components. Qualifications: • Previous experience as a commercial diesel mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills., • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment.Company DescriptionRTC CORP Is looking Advertising Sales Agent. Account Manager. please call 909$658$5400RTC CORP Is looking Advertising Sales Agent. Account Manager. please call 909$658$5400

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction Why Rush Truck Centers is for You: • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, &/or ASE certifications are preferred & rewarded Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Compensation: Wage Rate Range: Full-time salary non-exempt, plus benefits. Starting wage rate varies by education, prior relevant experience, wage parity, and other bonafide factors. About Climet In operation since 1962, Climet Instruments is a leading global manufacturer and provider of airborne particle counters and microbial air samplers, which have applications predominantly in pharmaceutical and biotechnology manufacturing. As a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies not simply to the products we manufacture but our desire that employees be mentally challenged to learn and grow their skillset within the company and constantly improve. Climet offers new employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and are looking for an opportunity for career development. Qualifications: • EDUCATION: High school diploma (required). Associate's degree in electronics or a related field (preferred), • PRIOR WORK EXPERIENCE:, • 1+ years of manufacturing, electronics, assembly, or quality experience (preferred), • Prior experience using a calculator, calipers, micrometers, tape measure, and drop indicators (preferred), • ISO 9001 Internal Auditor Certified (preferred), • Must have the ability to differentiate between colors., • Excellent Math and English skills (required). Bilingual is a plus., • Strong Interpersonal Communication Skills: verbal and written (required), • Excellent organizational skills and attention to detail, • Proficient in Microsoft Office Suite, • Prior stable employment history (required) Responsibilities: • Perform visual and dimensional inspections of in-process and finished goods, sub-assemblies, and components, • Maintain records and other documentation of inspection/test methods, procedures, and results, • Conduct and report internal audits and evaluations (as assigned), • Conduct final inspections, • Identify and troubleshoot equipment problems and defects, • Review calibration certificates for accuracy, • Maintain a clean and safe work environment, • Must follow procedures established for ISO 9001 Quality Management System, • Other duties as assigned Physical Requirements • Ability to type and work efficiently on a computer, • Must be able to lift 30 lbs., • Sitting or standing for extended periods (required), • Ability to differentiate between colors Climet is proud to be an Equal Opportunity Employer. Applicants are considered for all positions without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, ancestry, marital or veteran status. Job descriptions are not all-inclusive. Tasks, duties, and responsibilities may change for personal growth, organizational development, and/or the evolution of new technologies. Notification to Recruiters and Staffing Agencies: Please note that Climet Instruments Company has an internal recruitment department and does not work with external recruiters or "headhunters." Climet may supplement that internal capability from time to time with assistance from temporary staffing agencies that have a written agreement with Climet. Recruiters and staffing agencies are directed NOT to contact Climet (or any of our employees) directly to present candidates. Climet will not accept resumes from any source other than directly from our internal HR department. Climet will not pay a fee for any placement resulting from the receipt of a resume for which Climet does not previously have a written contract or agreement signed by Climet's General Manager. Any candidate for whom an agency has submitted a resume will be considered to have been referred by the organization to Climet free of any charges or fees. Climet disclaims and rejects any liability under any agreement purporting to be accepted based on negative consent, negotiation with a candidate, performance, or any means other than the signature of the General Manager of Climet. Company DescriptionIn operation since 1962, Climet Instruments Company, A Venturedyne Ltd. Company, has been in operation since 1962 and is a leading global manufacturer of airborne particle counters and microbial air samplers used primarily in biopharmaceutical, medical device, and life science applications to measure the air cleanliness of cleanrooms, isolators, RABS, and biosafety cabinets. Our mission is three words - - Value, Quality, and Innovation, which are the hallmark principles and core values in everything we do. As a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies to the products we manufacture, as well as our desire that employees be challenged to grow their skillset, develop their career with Climet, and constantly strive for improvement. Climet offers employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and motivated by a love for their work.In operation since 1962, Climet Instruments Company, A Venturedyne Ltd. Company, has been in operation since 1962 and is a leading global manufacturer of airborne particle counters and microbial air samplers used primarily in biopharmaceutical, medical device, and life science applications to measure the air cleanliness of cleanrooms, isolators, RABS, and biosafety cabinets.\r\n\r\nOur mission is three words - - Value, Quality, and Innovation, which are the hallmark principles and core values in everything we do. \r\n\r\nAs a valuable member of our team, you will quickly learn that "Quality is in our DNA." This applies to the products we manufacture, as well as our desire that employees be challenged to grow their skillset, develop their career with Climet, and constantly strive for improvement. Climet offers employees a team-based friendly work environment with a very stable organization. Climet is actively seeking sharp candidates that are loyal, self-disciplined, and motivated by a love for their work.

Job Description Diesel Truck & RV Mechanic/Technician • Schedule: 5-Day Work Week | Monday – Friday | Day Shift & Overlapping Shifts (8–10 hour shifts) + Overtime available, • Location: Colton, CA, • Compensation: $37 - $40.00 per hour (Starting base pay based on experience) Why Choose Colton Truck Terminal Garage? • High Earning Potential: Steady, competitive hourly pay that respects your field experience, plus consistent overtime opportunities to maximize your earning potential., • Structured Shop Operations: Work under a clear, communicative leadership structure. Our Shop Foremen execute first-thing morning check-ins to review daily jobs, check your progress, and ensure you have the exact parts and tools you need to stay productive., • Professional Development & Cross-Training: We actively focus on employee growth. You will collaborate directly with senior technicians and shop leadership to cross-train across multiple platforms, master advanced diagnostics, and expand your skill set beyond your prior roles. Key Responsibilities • Bumper-to-Bumper Service: Perform intermediate diagnostics, routine preventative maintenance, and comprehensive mechanical repairs on medium/heavy-duty trucks, trailers, and RV chassis., • Systems Troubleshooting: Diagnose and repair air and hydraulic brake systems, front/rear suspensions, steering linkages, electrical circuits, lighting systems, and heavy-duty HVAC units., • Proactive Diagnostics: Execute thorough initial inspections (including complete suspension and secondary system checks) immediately on day one so that our Shop Foremen can order required parts and secure customer approvals via SignWell without production delays., • Labor Efficiency: Maintain an aggressive focus on billable, revenue-generating jobs. Work closely with shop leadership to manage clock hours and minimize unapplied (idle) time under our daily efficiency guidelines., • Compliance Inspections: Conduct highly accurate safety inspections to prepare commercial units for state and federal DOT and BIT compliance., • Production & Documentation: Maintain a clean, organized, and safe bay. Accurately document completed repair steps, clock hours, and technical diagnostic notes on work orders via our shop management system (Karmak). Qualifications & Requirements • Experience: Minimum of 2–4 years of verifiable, hands-on experience in heavy-duty commercial truck, trailer, or RV maintenance and repair., • Tools: Must possess and maintain a complete, professional personal tool set capable of handling general heavy-duty repairs (in alignment with California trade guidelines for this wage tier)., • Technical Skills: Strong mechanical aptitude with solid foundational knowledge of diesel engine maintenance, air brake systems, and circuit-level electrical troubleshooting. Experience with Cummins diesel engines or RV chassis systems is highly advantageous., • Licensing: Must possess and maintain a valid driver’s license. A valid Class "A" or Class "B" Commercial Driver's License (CDL) is preferred., • Screening: Must be able to pass a clean background check, pre-employment physical, and drug screening. Our Comprehensive Benefits Package Includes: • Competitive Hourly Rate with Overtime, • Comprehensive Health Insurance (Medical, Dental, Vision), • Company-Paid Life Insurance & Disability Coverage, • 401(K) Retirement Plan with Company Match, • Paid Vacation & Personal Days, Paid Holidays, and Sick Days, • Company-Provided and Laundered Uniforms, • Continuous, Paid Hands-On Technical Training and Cross-Training To Apply: Ready to bring your tools to an established independent shop that treats you right and respects your drive? Apply TODAY to connect with our team and schedule an interview with our shop manager! Company: Colton Truck Terminal Garage Location: Colton, CA

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240064

Job Description We are a small but busy business operating out of the home seeking a pest control field technician to service routes in the inland empire. Candidate must have a applicators or branch 2 field rep license. Great pay, no health benefits.

Job DescriptionDescription: Lead Commercial Service Technician / Plumber JP Prime Inc. is looking to hire experienced Commercial Service Plumbers, and we are interested in you! We are a rapidly growing and expanding commercial plumbing company and pride ourselves on hiring and retaining the most qualified and best commercial service plumbers in the business. Advancement opportunities and continuous training will also be available for the individuals who wish to strive for more. At JP Prime Inc., we have core values that are our trademark in the industry, which shows that we are committed to providing the best quality work and great customer service to our clients. We offer an hourly pay program with huge earning potential, with steady work, and the opportunity to make great money performing the trade you take pride in. Qualifications and Responsibilities: • 5+ years’ experience as a Commercial Service Plumber, • Lives in the Orange County Market, • Must have experience performing Commercial Plumbing Service work in office buildings, medical and healthcare facilities, industrial and manufacturing facilities, distribution/fulfillment centers, etc., • Ability to troubleshoot, repair and replace plumbing fixtures, including faucets, toilets, flush valves, instant hot water heaters, etc., • Drain cleaning and jetting experience required, • Ability to work on water, irrigation, and gas piping, including PVC, copper, black pipe, and galvanized pipe, • Experience working on pump systems, including recirculation pumps, booster pumps, and sump pumps (duplex and triplex systems), • Ability to troubleshoot and repair commercial application water heaters and/or boilers, • Must be able to safely operate a service truck, which must be stored at home in a safe area such as home driveway or garage (no street parking), • Must be able to work nights and weekends when projects require, • Experience dealing with commercial environment customers is a must, so we ask that you are personable, presentable, and professional at all times. Requirements: • High school diploma or equivalent, • Ability to lift heavy objects and work in a physically demanding environment, • Excellent communication and teamwork skills, • Willingness to learn and take direction from experienced plumbers/installers, • Valid driver's license Compensation and Benefits: • $40-45hr. depending on knowledge and experience, • Take-home company service truck, gas card, and company cell phone, • Health, dental, vision, and Aflac, • Paid time off (sick, vacation, holidays), • 401(K) options, • Eligibility for annual bonuses, • Access Perks Program benefits Requirements:

Job DescriptionBenefits: • Competitive salary, • Employee discounts, • Opportunity for advancement Company Overview At Tire Pros we value each employee and encourage growth. We provide a fun and friendly work environment along with excellent training and development, competitive compensation, and top-tier benefits. Start your exciting new career with a strong and stable company. Benefits and Perks • Excellent Training and Development, • Competitive Compensation, • Friendly Work Environment, • Top Tier Benefits Job Summary Lead Automotive Service Technician is responsible for identifying necessary vehicle service and performing the repair, service, and/or maintenance work. Great growth and career opportunities. Responsibilities • Examines customer vehicles, • Identifies necessary vehicle repairs and maintenance to include drivability issues, • Performs vehicle repairs and maintenance to include suspension, brakes, alignments, repairs, • Documents services performed, • Requests necessary parts, • Follows Safeguards rules and regulations Desired Qualifications • 3+ years of automotive technician experience, • Working knowledge of shop equipment such as wheel and tire equipment, alignment system, diagnostic equipment, • A motivation to learn and succeed, • Valid in-state driver's license with good driving record, • Ability to read and comprehend instructions and information

Job Description We are looking for an Experienced Mechanic to join our team! You will be responsible for repairing various vehicles and transmission systems. Responsibilities: • Repair automobiles, and trucks, • Specialize in vehicle transmission systems, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the customer Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment, • Specialize in foreign and domestic cars, • Have own toolsCompany Descriptionapply online or in person 280 S palm ave Rialto CA 92376 (909)996-9792 Alexapply online or in person 280 S palm ave Rialto CA 92376\r\n(909)996-9792 Alex

Job Description**Mobile Diesel Technician at Transwest Mobile **Ready to Lead the Way? Join Transwest Mobile! At Transwest Mobile, we’re innovators and problem-solvers, delivering top-tier mobile repair solutions across Arizona, California, Nevada, Texas, and Utah. With over 25 years of trusted service, we keep contractors, municipalities, and fleet operators moving with minimal downtime. We’re seeking skilled technicians with a passion for excellence to join our dynamic team. If you’re ready to take on more responsibility, solve complex challenges, and grow with us, let’s connect! What You’ll Do • Perform advanced maintenance and repairs on heavy-duty diesel engines, hydraulics, electrical systems, and farm machinery., • Diagnose complex mechanical issues using advanced diagnostic tools and service manuals., • Execute both scheduled and unscheduled repairs with minimal supervision, ensuring safety and performance standards., • Operate cranes and specialized equipment to support repair and maintenance tasks., • Communicate clearly with customers, providing detailed service recommendations and updates., • Maintain accurate, detailed records of all repairs and maintenance activities., • Mentor entry-level technicians and collaborate with teams to enhance service delivery., • Stay current on industry advancements and apply expertise to improve repair processes.What You Bring, • High school diploma or GED., • 5+ years of hands-on experience with diesel engines, hydraulic, or electrical systems., • Advanced knowledge of diagnostic tools and service manuals., • Strong troubleshooting skills and ability to work under pressure in fast-paced settings., • Ability to provide own tools suitable for the job., • Capability to prioritize and multitask effectively., • Valid driver’s license and ability to drive a company vehicle (mobile role)., • Ability to pass background checks., • Ability to lift 50+ pounds and work in indoor/outdoor environments.Preferred Qualifications, • ASE certifications or OEM-specific training (e.g., Freightliner, Detroit, Cummins)., • Experience with field service or mobile repair., • Strong communication and customer service skills., • Proven customer-facing experience or project leadership on job sites.Why Transwest Mobile?, • Impactful Work: Tackle challenging repairs to keep critical equipment operational., • Growth Opportunities: Work with industry leaders like Cummins, Eaton, and Ford, and mentor others., • Supportive Culture: Join a team that values innovation, collaboration, and your expertise., • Top Benefits:- Health, Vision, and Dental Insurance- 401(k)- Health Savings Account with Company Match, • Life and Disability Insurance, • Holidays and Paid Time Off, • Referral Bonus Program, • Overtime opportunities based on performance, • On-the-job training, • Work boot allowance, uniforms, and cleaning provided, • Company vehicle for mobile rolesAbout Us Since 2009, Transwest Mobile has redefined fleet productivity with innovative mobile repair services across Arizona, California, Nevada, Texas, and Utah. Our flawless safety record, $3M liability insurance, and 24/7 availability make us the trusted choice for field-ready repairs. Join us to drive efficiency, capability, and safety in every job. Ready to Step Up? Apply now to join a team that values your skills and pushes the industry forward. Let’s keep fleets moving together! Visit transwestmobile.com Equal Opportunity Employer Transwest Mobile Truck Repair is an equal opportunity employer and value diversity at our company. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, protected veteran status, or any other characteristic protected by applicable law. Employment may be contingent upon successful completion of a background check and/or drug screening, where permitted by law. We are committed to providing reasonable accommodations to qualified individuals with disabilities and to individuals with sincerely held religious beliefs, in accordance with applicable law. You should be proficient in: • Troubleshooting Skills, • Electrical Systems Diagnostics & Repair, • Vehicle Electronics & Computer Controls, • Diesel Engine Systems, • Brake & Suspension Systems, • Preventive Maintenance & Inspection, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Repair, • Suspension and Steering, • Brakes, • Tire Service

Job DescriptionBenefits: • 401(k), • Company car, • Company parties, • Dental insurance, • Free uniforms, • Health insurance, • Vision insurance Mr. Rooter Plumbing is seeking a reliable and skilled Mechanic Technician to inspect, maintain, diagnose, and repair our company vehicles and equipment. The ideal candidate will ensure all machinery, company trucks, and mechanical systems operate safely and efficiently to minimize downtime and support daily operations. Key Responsibilities • Perform company vehicles and equipment, • Diagnose mechanical, electrical, and hydraulic issues, • Repair engines, brakes, transmissions, suspension systems, and other components, • Conduct inspections and preventative maintenance, • Maintain accurate service and repair records, • Respond to emergency breakdowns and service calls, • Ensure compliance with safety regulations and company standards, • Order and manage parts, tools, and shop supplies, • Test vehicles and equipment after repairs, • Keep work areas clean and organizedQualifications, • High school diploma or equivalent required., • Technical certification or vocational training in automotive, diesel, or heavy equipment mechanics preferred., • Minimum of 25 years of mechanic or maintenance experience preferred., • Strong knowledge of mechanical, hydraulic, and electrical systems., • Proficiency in the use of diagnostic tools, repair equipment, and hand tools., • Ability to interpret technical manuals, schematics, and service documentation., • Valid drivers license required; CDL preferred where applicable., • Strong troubleshooting, analytical, and problem-solving abilities.Preferred Skills, • Experience with diesel engines, • Hydraulic and electrical repair experience, • Fleet maintenance experience, • Time management and organizational skillsPhysical Requirements, • Ability to lift and move heavy equipment and components., • Ability to stand, walk, bend, kneel, and work in physically demanding environments for extended periods., • Ability to work indoors and outdoors in varying weather and operational conditions.Work Environment This position operates in shop and field environments and may require exposure to noise, grease, fumes, moving mechanical parts, and varying weather conditions. Occasional overtime, weekend work, or emergency call-outs may be required based on operational needs. Benefits We offer a competitive compensation package that may include: • Health, dental, and vision insurance, • Retirement savings plan

Job Description Job Title: Quality Control Inspector Location: Fontana, CA Shift: TBD Employment Type: TBD Reports To: Quality Control Manager Job Overview We are seeking a Quality Inspector to ensure our products and processes meet company and customer standards. This role supports daily quality operations, assists the Quality Control Manager, and works closely with production and engineering teams. Key Responsibilities • Follow all safety, quality, and company policies, • Inspect materials, components, and finished products, • Read and use blueprints, drawings, and work orders, • Record inspection results and maintain reports, • Identify quality issues and recommend solutions, • Assist with updating inspection procedures (SOPs), • Perform product and process audits, • Support production teams as needed, • Communicate and help resolve quality concerns, • Complete other duties as assigned Qualifications • High school diploma or equivalent preferred, • Minimum 3 years of experience in a similar role, • Manufacturing experience preferred (plastics industry a plus), • Familiarity with SQF, HACCP, and GMP is a plus, • Ability to read blueprints and technical drawings Skills • Strong attention to detail, • Ability to multitask and meet deadlines, • Self-motivated and able to work independently, • Basic computer skills (Microsoft Office), • Good English communication skills (read, write, speak), • Willingness to work overtime and weekends as needed, • Bilingual (Spanish) Physical Requirements • Stand and walk for extended periods, • Lift and carry up to 50 lbs, • Perform physical tasks such as bending, climbing, and reaching, • Use ladders when needed, • Work in a warehouse environment with varying temperatures #SLY123

Job Description Construction Estimating Experience Required. NK Demolition is looking for an estimator for their demolition company. This person would be responsible to calculate the total costs of a demolition project, including labor, equipment, disposal, and permits, to produce accurate bids. You would do site visits, analyze provided plans, blueprints, engineered reports, etc. to determine the exact scope of work. Experiences required are; at least 2+ years experience in demolition. Must have experience in reading plans, great communication via verbal and written, knowledge in demolition, skills in math, and Microsoft office. This is a detail-oriented job, you will be trained and expected to perform according to expectations.

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction Why Rush Truck Centers is for You: • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, &/or ASE certifications are preferred & rewarded Benefits: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job DescriptionAre you mechanically minded and looking for the next step in your career? We’re seeking trucking industry pros with a knack for problem-solving and their own tools to join our service department as a mechanic. You’ll troubleshoot everything from shoddy air conditioning to vehicle electrical systems, conducting preventive maintenance and structural repairs along the way. We need a candidate with stellar communication skills and a strong work ethic. If this sounds like you, start your application today! We are looking for a mechanic to work day shift from Monday - Friday: Responsibilities • Diagnose issues with semi-tractors using a computer and performing PM services and minor repairs to our mostly Detroit engine fleet, • Conduct repairs and replacements of faulty or worn-out parts, such as brakes, transmissions, engines, and cooling systems, • Use diagnostic tools and equipment to identify and resolve complex mechanical problems, • Perform preventative maintenance tasks to ensure the longevity and optimal performance of the truck fleet, • Collaborate with other mechanics and team members to efficiently complete repair jobs, • Keep detailed records of all maintenance and repair work performed, • Adhere to safety protocols and maintain a clean and organized work area, • Stay updated on industry advancements, new technologies, and best practices in diesel truck maintenance, • Source and remediate mechanical problems and malfunction codes that are identified in the vehicle's mechanical systems, electrical system, and electronic systems, • Engaging in learning opportunities to update job knowledge and technical skills, • Team up with managers and other mechanics to diagnose and service cars coming in for auto repairs, • Inspect, test drive, and perform diagnostic tests to determine vehicle problems, parts needed for repairs, and necessary work, • Encourage and facilitate preventive maintenance work such as oil changes, air conditioning service, flushing, brake replacement, tire rotation, and more, • Maintain accurate customer records for vehicles’ repairs, parts, maintenance histories, and moreQualifications, • High school diploma or GED equivalent required, • An associate's degree from a vocational or technical school and/or ASE certification are a plus, • Must be an effective communicator who maintains a solid work ethic, • Strong manual dexterity and proficiency with hand tools and other repair shop equipment is necessary, • A valid driver’s license is necessary About Sugar Creek TransportationWe’re Sugar Creek Transportation, based in Southern California, and we’ve been serving the transportation industry since 2014. Our journey started with a simple goal — to build a company where drivers and owner operators are treated with respect and have the support they deserve. Over the years, we’ve grown by focusing on what matters most: reliable service, honest communication, and consistent freight. We run across SoCal, NorCal, Phoenix, Las Vegas, Reno, Arizona, and San Jose, offering dedicated routes, flexible scheduling, and steady pay every week. Our team works hard to keep things simple — from flexible logistics solutions to expedited, claim-free deliveries — all while making sure our drivers stay moving and earning. When you work with us, you’re part of a company that values your time, rewards your effort, and helps you grow mile after mile.

Job Description HiFyve is hiring an Electro-Mechanical Technician in the plastics manufacturing industry in Fontana, CA! Salary: $34/hr – $42/hr (based on experience) Shift: Full-Time – Primarily 1st Shift (7:00 AM – 3:00 PM, Monday–Friday) Location: On-site – Fontana, CA Position Overview We are hiring an Electro-Mechanical Technician to support the Injection Molding Department at a leading plastics manufacturing facility in Fontana, CA. This is a hands-on, hybrid role combining maintenance, changeovers, process optimization, and technical support — not a traditional single-function maintenance position. Unlike conventional manufacturing environments with separate roles for operators, maintenance, and changeovers, our technicians are cross-functional and handle multiple aspects of production. Key Responsibilities • Perform preventive and reactive maintenance on injection molding equipment (approx. 600-ton Husky machines)., • Handle changeovers, setups, and process adjustments to support production uptime., • Diagnose and repair mechanical and electrical issues, including sensors, VFDs, and other components., • Provide technical support for process improvement and troubleshooting., • Collaborate with production teams to maintain quality and efficiency standards., • Support blow molding operations when necessary and cross-train across platforms., • Assist during off-shift hours for training, breakdowns, or emergencies., • Participate in on-call/weekend support rotation as needed. Qualifications • Strong mechanical aptitude with hands-on troubleshooting skills., • Basic to intermediate electrical knowledge — understanding of components, circuits, and controls., • Programming not required., • No robotics experience necessary., • Background in injection molding preferred (brand experience flexible)., • Experience with Husky or similar 600-ton injection molding equipment highly transferable., • Candidates from other industries welcome; plastics experience is a plus., • Ability to read technical documentation and perform hands-on diagnostics., • Team-oriented, reliable, and comfortable in a hybrid maintenance role. Compensation & Schedule • Pay: $34 – $42/hour (based on experience), • Shift: Primarily 1st Shift (7:00 AM – 3:00 PM, Monday–Friday), • Must be flexible for occasional off-shift work, weekends, or holidays based on plant needs.

Job Description 2nd Shift Heavy Duty Diesel & Rollingstock Mechanic Starting at $33.80/hour Who We Are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at www.thompsonpipegroup.com Position Summary The Heavy Duty Diesel Mechanic is responsible for the inspection, diagnosis, repair, and preventative maintenance of heavy-duty diesel trucks, trailers, construction equipment, and other diesel-powered vehicles and machinery. This role ensures all equipment operates safely, efficiently, and in compliance with manufacturer specifications and regulatory standards. Key Responsibilities • Perform complete diagnostic testing on diesel engines, transmissions, drivetrains, hydraulic systems, air brakes, steering, suspension, electrical, and HVAC systems using computer diagnostic tools and traditional methods., • Conduct preventative maintenance services including oil changes, filter replacements, tire services, brake inspections, and fluid services., • Diagnose and repair mechanical, electrical, hydraulic, and computerized system failures on heavy-duty trucks, and off-road equipment., • Disassemble, overhaul, and reassemble diesel engines, transmissions, and major components as needed., • Perform welding, fabrication, and custom repairs when required., • Test drive or operate vehicles and equipment to verify repairs and ensure proper performance., • Maintain accurate records of all services, repairs, parts used, and time spent using repair order systems., • Read and interpret technical manuals, schematics, and service bulletins., • Adhere to all safety protocols, shop procedures, and environmental regulations (including proper handling of hazardous materials)., • Provide emergency field service and roadside repairs as assigned. Qualifications & Requirements • High school diploma or GED required; technical school or apprenticeship in diesel technology preferred., • Minimum 3–5 years of verifiable experience as a heavy-duty diesel mechanic (truck, trailer, or heavy equipment)., • Strong knowledge of diesel engines, air brakes, hydraulics, and electronic control systems., • Valid driver's license required, • Ability to read, write, and perform basic mathematics., • Must own or be willing to acquire a basic set of hand and power tools., • Ability to lift up to 75 lbs. occasionally and work in various weather conditions. Skills & Competencies • Excellent mechanical aptitude and troubleshooting skills., • Proficiency with diagnostic software and scan tools., • Strong attention to detail and commitment to quality workmanship., • Ability to work independently and as part of a team., • Good communication and customer service skills., • Reliable, safety-conscious, and able to work flexible hours including occasional overtime or weekends. What We Offer • Thompson offers a variety of benefit plans and a company-matched 401K retirement plan, • Life and Supplement Life, • Employee Discounts, • Paid Holidays, • Company Events, • Training and Development, • Career Advancement Opportunities To learn more about this opportunity visit www.thompsonpipegroup.com Thompson Pipe Group is an Equal Opportunity Employer, and we pride ourselves on recruiting, employing, training, compensating, and promoting regardless of race, religion, color, national origin, sex, disability, age, veteran status, and other protected status as required by applicable law. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Referral program, • Vision insurance You should be proficient in: • Electrical Systems Diagnostics & Repair, • Diesel Engine Systems, • Engine Repair, • Heating and Air Conditioning, • Engine Performance, • Lift Truck Repair & Maintenance, • Diesel & Heavy Equipment Systems, • Hydraulic Systems & Components, • Equipment Diagnostics & Troubleshooting

Job Description Responsibilities A Body Shop Technician will repair or replace damaged body parts back to Pre-Accident Condition with factory and dealership specifications. Quality repair need to meet or exceed the original factory fit and finish. The end result should be an invisible repair. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Knowledge of the manufacturer’s and technical repair process., • Ability to use frame and measuring equipment per vendor procedures., • Perform initial teardown of vehicle., • Identify parts for cut-in and edging., • Perform all repair procedures according to factory specifications and company policy. I-Car Standard., • Perform and sign-off on all quality check before sending vehicle to paint department., • Re-assemble painted vehicle and painted parts., • Perform a final quality check and review of work order prior to sending the vehicle to the detail department., • Work with apprentice or lesser skilled technicians in developing repair skills. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • Three years’ body shop experience., • ICAR Welding Certificate., • Valid driver’s license and insurability. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description The Electric Pallet Jack (EPJ) Auditor is responsible for ensuring safe, compliant, and efficient operation of electric pallet jacks within the distribution center. This role conducts routine audits, monitors operator performance, verifies certification compliance, and supports safety initiatives to maintain a safe working environment. • Conduct routine audits of Electric Pallet Jack (EPJ) operators to ensure compliance with company safety policies and OSHA regulations., • Verify that all operators maintain current and valid equipment certifications., • Observe and document safe operating procedures, including proper load handling, speed control, pedestrian awareness, and dock safety., • Complete audit reports accurately and in a timely manner., • Provide immediate feedback and coaching to operators regarding safe work practices., • Report safety violations, near-misses, and potential hazards to management., • Partner with the Safety and Operations teams to recommend corrective actions and process improvements., • Assist in coordinating refresher training and re-certification as needed., • Maintain audit records and certification tracking documentation., • Support overall warehouse safety initiatives and continuous improvement efforts

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for diesel mechanics who are interested in working on trucks and trailers! Shift Hours: Monday through Friday, 8:00 AM to 5:00 PM. This position is for our Bloomington, CA branch at 225 West Slover Ave. Pay Range: $22.00 to $42.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a diesel tractor / truck / semi, • Suspension repair experience, • Experience with air brake systems and repairs, • Experience with oil changes, preventative maintenance, starters, wheel seals, and all bolt on components, • Willing and able to assist with trailer work when needed Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Prepare accurate estimates, secure new projects, manage change orders, and assist project managers through each phase of work. You should be comfortable working in the office, reading plans, bidding on your own, and coordinating with project managers and field staff. Responsibilities • Prepare complete electrical estimates for commercial and public works projects, • Perform quantity takeoffs from plans and specifications, • Build bids using Accubid or Trimble Estimation, • Review drawings and specs for scope gaps and risks, • Coordinate pricing with vendors and suppliers, • Submit bids and track results, • Manage and price change orders on active projects, • Assist project managers with cost tracking, vendor coordination, and RFIs/submittals as needed, • Support turnover from estimating to operations Required Qualifications • 3+ years of electrical estimating experience (commercial preferred), • Ability to read and interpret construction drawings and specifications, • Experience preparing complete estimates independently, • Experience pricing and managing change orders, • Strong communication with internal teams and vendors, • Organized and detail-oriented Preferred Qualifications • Public works or prevailing wage experience, • Electrical field experience, • Experience supporting project managers or running small jobs, • Familiarity with local general contractors and bidding environments Software / Systems • Accubid (preferred), • Trimble Estimation, • Bluebeam Revu, • Microsoft Excel and OutlookCompany DescriptionWe are an electrical construction company that builds and remodels schools in Southern California.We are an electrical construction company that builds and remodels schools in Southern California.

Job DescriptionSalary: $135,000 - $150, 000 per year About Mendoza Companies Mendoza Companies is a multi-entity ecosystem of construction, services, and investment businesses operating underThe Mendoza Way. The platform includes High-Light Electric, Inc. (HLE) a California-based union electrical infrastructure contractor founded in 1996 delivering public works and complex electrical construction across California along with Mendoza Trust and an international independent contractor workforce. We partner with Caltrans, municipalities, transit authorities, and infrastructure programs throughout California, with active expansion into Nevada, Arizona, and additional U.S. markets. In 2025, HLE was recognized on the Inc. Regionals Pacific list (#116). Mendoza Companies is guided byMission 2040: to build a $1 billion business ecosystem connecting 1,000 families and communities through business. The Role The Senior Estimator owns HLEs bid development process from pursuit through preconstruction handoff and maintains active involvement through project execution and closeout. This role produces accurate, competitive, and margin-conscious estimates across civil and electrical scopes, with civil estimating as the primary competency requirement for this seat. This is not a desk estimating role. The Senior Estimator brings real field experience into the estimating process closing the gap between what a bid assumes and what the field can actually execute. They lead a small estimating team, develop junior estimators, and serve as the primary estimating resource within their assigned AOM business unit. As HLE transitions toward civil contractor leadership, this hire strengthens HLEs civil estimating capacity and complements the existing electrical estimating structure forming a two-senior model where civil and electrical expertise develop in parallel, with junior estimators cross-training under each lead. What You'll Do • Maintain a consistent bid submission rate that meets HLEs pursuit calendar on scope, on deadline, and within margin targets., • Own takeoff accuracy and productivity validation across all active bids, • Attend and document pre-bid site walks and pre-bid meetings site condition reports submitted prior to every bid submission., • Execute pre-bid and post-bid reviews on every pursuit findings logged, go/no-go recommendations supported by data, and results applied to improve future pricing strategy and competitive positioning., • Deliver complete, assumption-transparent preconstruction handoffs to the AOM on every awarded project and maintain post-award engagement through financial reviews, change order support, and job closeout analysis., • Participate in periodic project financial reviews with the Finance Director and AOM validate actual costs and productivities against bid assumptions, support critical change order pricing, and attend job closeout reviews to extract and apply lessons learned., • Protect bid margin variance between estimated and actual costs is tracked, reviewed, and used to drive continuous estimating improvement., • Lead junior estimator development measurable progress tracked through 1-on-1 cadence, takeoff quality improvement, and readiness milestones as the team is built, • Own estimating team scorecard metrics and quarterly Rocks within the ML10 structure Education Bachelors degree in Civil Engineering, Construction Management, or a related field preferred. Equivalent experience may be considered in lieu of a degree. Relevant certifications may include: • AACE International Certified Cost Technician (CCT), Certified Estimating Professional (CEP), or equivalent, • APWA (American Public Works Association) certifications, • AGC (Associated General Contractors) construction education programs, • Caltrans or public works contractor training, • Accredited construction management or estimating coursework Verification of certifications may be requested during the hiring process. Experience • 57 years of combined civil construction field and estimating experience required, • Background in field operations (foreman, superintendent, or similar) strongly preferred, • Proven experience estimating civil scopes (earthwork, grading, utilities, roadway) required, • Experience in California public works (prevailing wage, union labor, certified payroll) required, • Working familiarity with electrical estimating in a public works or infrastructure context preferred., • Experience with preconstruction handoffs preferred, • Experience mentoring or leading estimators preferred Certifications & Tools • Proficiency in Bluebeam, Excel (advanced), and equivalent takeoff platforms required., • Familiarity with Procore preferred., • OSHA 10 or OSHA 30 preferred., • Bilingual English/Spanish preferred; not required for this role. A valid drivers license is required for this role due to travel to job sites and project locations. What We Offer • Comprehensive health benefits package medical, dental, vision., • 401(k) or equivalent retirement plan., • Multi-entity ecosystem with active expansion into Nevada, Arizona, and additional U.S. markets., • A mission-driven organization building for the long term Mission 2040. What Success Looks Like (GWC Mendoza Way) 1. Gets It Understands that estimating is a core business function directly tied to execution, profitability, and field performance. Recognizes the importance of accuracy, accountability, and alignment with real-world conditions. 1. Wants It Is motivated to take full ownership of the estimating process, including deadlines, margin responsibility, and decision-making. Values accountability and takes pride in delivering high-quality, reliable work. 1. Capacity to Do It Can manage multiple bids simultaneously while maintaining accuracy and discipline. Communicates effectively with field and operations teams and operates confidently in a fast-paced, high-responsibility environment. Hiring Process Our process includes: • Application and screening questionnaire, • AI-assisted resume and structured interview review, • Recruiter screen, • Leadership panel interview, • Final interview with the CEO AI tools are used to support consistency and efficiency and are regularly reviewed to ensure fairness and compliance. Qualified candidates can expect a timely and structured process. Pre-employment screening, reference checks, and verification of credentials are required prior to offer. EEO Statement Mendoza Companies and High-Light Electric, Inc. are equal opportunity employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, genetic information, or any other characteristic protected by applicable law. Learn More About Us High Light Electric

Job Description$24/Hour SEMI TRUCK TRAILER MECHANIC in SAN BERNARDINO - Set Schedule & Benefits The Quickest Way To Apply (for $24/Hour Trailer Mechanic) & Schedule an Interview Is To Visit This Link & Fill Our Our Official Application https://www.servicebrostransport.com/truck-driver-application-form/ THERE IS ONLY 1 POSITION AVAILABLE SO PLEASE APPLY IMMEDIATELY! Job Tasks: • Perform all levels of preventive maintenance services., • Repair trailers and related equipment in a timely and efficient manner., • Inspect brake systems., • Responsible for repairing damage to containers, trailers, and chassis., • Repairing tears on the sides of containers., • Replacing lights., • Tire repair., • Landing gear repair., • Frame repair., • Preventative maintenance / running repair / brakes / suspension., • BIT - 90 Day Inspections., • DOT - Annual Inspections., • Medium to Light Duty Trailer repairs. Benefits: • Work All Year Round. (Weekends Off)., • Early Morning Shifts & Home Daily (No Graveyard)., • Benefit Coverages up to $300., • Anniversary Payment., • Bonus Pay., • Holidays Paid., • Sick Pay., • 401K., • Life Insurance. We seek great, diligent customer service-oriented drivers who want a stable environment with excellent co-workers and a kind company culture. We at Service Bros want to ensure the best job is always done by our people, and in order to ensure this happens, we hire the best. Our team of professionals would love to talk to you and see if you might be a good fit if you match the qualifications. Safety and professionalism are our key points of emphasis. WE ARE AN EQUAL OPPORTUNITY EMPLOYER. The only way to get hired (fill out our full online application): https://www.servicebrostransport.com/truck-driver-application-form/

Job DescriptionTrailer Mechanic / Registered Tank Inspector Company: Depot Connect International (DCI) Industry: Tank Trailer & ISO Tank Container Services Location: Bloomington, CA Pay Range: $22.00 – $42.00 per hour (Starting rate based on experience) Build a Career That Keeps America Moving Depot Connect International (DCI) is a global leader in Tank/ISO Tank Container Services and Tank Trailer Parts. Formed by the combined expertise of industry leaders Quala, Boasso Global, and PSC, DCI operates over 120 locations worldwide with more than 3,500 employees delivering mission-critical transportation services. We are currently seeking DOT inspection-certified Trailer Mechanics with specialized tank trailer repair experience who take pride in their craft and understand the importance of safety, precision, and reliability. If you enjoy diagnosing problems, solving complex mechanical challenges, and working on heavy-duty equipment that truly matters, this is the opportunity to grow your career within a stable, expanding global company. Role Overview The Trailer Mechanic / Registered Inspector is responsible for inspecting, diagnosing, repairing, and maintaining a diverse fleet of specialized tank trailers in strict compliance with DOT and HM183 (hazmat) regulations. This role requires strong mechanical aptitude, advanced troubleshooting ability, and an absolute commitment to safety and quality workmanship. Key Responsibilities DOT & HM183 Inspections: Conduct rigorous, compliant inspections on various cargo tank specifications, including low-pressure liquid and chemical trailers (MC 306/406, MC 307/407) and high-pressure/cryogenic gas trailers (MC 331, MC 338). Diagnostics & Repairs: Diagnose failures and perform high-quality repairs on mechanical, electrical, structural, and tank piping/valve systems. Brakes & Suspension: Inspect, service, install, and repair trailer suspension systems and air brake systems. Compliance & Documentation: Ensure all structural repairs and testing align perfectly with federal hazmat safety standards; maintain meticulously detailed inspection logs. Safety & Environment: Follow all OSHA and confined space safety procedures while maintaining a clean, organized shop floor. Welding (Plus): TIG welding experience (aluminum, stainless steel, or carbon steel) is highly preferred to align with our shop's ASME "R" Stamp capabilities. Qualifications DOT Inspection Certification Required (Meets FMCSA criteria for a Registered Cargo Tank Inspector). Experience: 2+ years of dedicated tank trailer repair and testing experience preferred (ideal candidate has 3–5 years). Technical Knowledge: Deep familiarity with DOT HM183 cargo tank testing requirements (V, I, L, P, T, K testing methodologies). System Mechanics: Proven experience troubleshooting and repairing heavy-duty air brake systems, suspensions, and industrial piping. Quality Focus: Ability to read, understand, and execute repairs according to technical manuals, blue-prints, and federal compliance standards. Physical Requirements Regularly lift and/or move up to 50 lbs (and occasionally up to 75 lbs with assistance). Ability to safely enter, exit, and work inside tank trailer manholes (Confined Space environment). Ability to stand, bend, kneel, and work in physically demanding shop conditions. Career Growth & Development At DCI, we believe in investing heavily in our mechanics. We offer: Skill-Based Pay Reviews: Earn automatic pay rate evaluations every 6 months as you level up your skills until you hit top pay! Production Bonuses: Earn extra compensation based on your efficiency and output. Advanced Certifications: Access to resources and training to become a National Board ASME Certified Welder. Tool Support: Take advantage of our Tool Purchase Program to build your professional kit. Clear Pathways: Transparent career advancement tracks within a massive, global logistics footprint. DCI Benefits Competitive pay ($22.00 – $42.00/hr) with built-in Tier Levels. Partially employer-paid medical, dental, and vision insurance. 401(k) with a generous employer match (Traditional and Roth options). 100% employer-paid short-term/long-term disability and group life insurance (up to 1.25x annual salary). Paid Time Off (PTO) plus 10 paid holidays. Optional HSA & FSA accounts. Tuition Reimbursement & Employee Referral Programs. An effective, award-winning, and proven shop safety culture. APPLY NOW and START A NEW CAREER WITH THE TANK PROS!

Job Description Responsibilities The Mobile Diesel Mechanic is responsible for maintaining the fleet for clients and to handle service calls at client locations. Provide service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Leasing opens the door to the world of opportunity. We are the premier commercial transportation solutions provider for businesses across North America. Our network of Idealease and PacLease partners allow us to offer our customers complete truck leasing and rental solutions across our network of dealerships. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility., • Have a current and valid CDL and Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Commercial New Construction Plumber | $28.00 to $34.00 per hour, depending on experience Work Schedule: Monday through Friday | 6:00am - 2:30pm with some variation depending on season Location: Inland Empire Position Summary: This is manual work at the journeyman level in the installation of commercial plumbing systems for new commercial construction. Redlands Plumbing Heating & Air | Redland's CA Be part of a locally owned and operated company that has been serving the Inland Empire area for 127 years Our team prides themselves in providing excellent customer service, top quality craftsmanship, and a positive work environment. We know that a company is only as good as its employees; which is why we only hire the best, and we work hard to foster a friendly, professional work environment that empowers our employees to find success in their everyday lives. What We Provide: • STABLE, GROWING, and PROFITABLE, • Team oriented company culture, have your voice heard!, • We invest in your training and career growth, • Supporting ownership & management team, • Highly rated by our customers and employees, • Great reputation built around loyal customer base, • We value work/life balance Benefits: • Medical insurance 100% covered by the employer, • Dental insurance, • Life Insurance, • 6 Paid holidays, • 40 hours of Paid Vacation, • 40 hours sick time, • 401K w/ Company match, • Company phone of reimbursement What We Are Looking For: • 6+ years of hands-on experience as a commercial plumbing, • Clean and insurable driving history, • Excellent communication and customer service abilities, • Highly organized with strong attention to detail and blueprint interpretation skills, • Thorough understanding of local and state plumbing regulations, • Comfortable performing duties in varying weather conditions, • Skilled in the use of plumbing tools, equipment, and industry-standard techniques, • Strong awareness of workplace safety procedures and potential job-site hazards, • Self-motivated with the ability to manage tasks independently and efficiently

Job DescriptionOverview Company Overview: Advance Your Career in Insurance Claims with Allied Universal® Compliance and Investigation Services. Allied Universal® Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you’re ready to grow with the best, explore a career with us and make a difference. Job Description JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site Inspector. The Field Site Inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data, and document findings. Inspections must be completed using approved guidelines and standards. • Multiple positions are available!, • Must possess a valid driver's license with at least one year of driving experience, • Pay Rate: $25 - $30 / hr. RESPONSIBILITIES: • Conduct independent investigations of assigned cases in a specific geographic area., • Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones), • Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections, • Efficient and timely workload management to meet assignment time completion., • Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required., • Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms., • Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance., • Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Proficient in utilizing laptop computers, mobile devices, and tablets., • Flexibility to work varied and irregular hours/days including weekends, • Successful completion of the Allied Universal Investigations’ training/orientation course, • Successful completion of all required Site Inspector training, internal and CMS-required, both initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): • Associate degree or higher, preferably in Criminal Justice, • Prior insurance investigations and/or healthcare facility on-site inspections/compliance., • Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred., • Effective public speaking and communication skills. BENEFITS: • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Seven paid holidays annually, sick days available where required by law, • Vacation time offered at an initial accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1625068

Job Description Senior Superintendent Location: Redlands, CA Schedule: Full-Time | Project-Based / In-Office Project Focus: High-End Luxury Apartments, Multifamily, Mixed-Use & Garden-Style Developments Compensation: $200,000–$240,000 + Bonus + Full Benefits Package About Us We are a well-established construction group with a strong reputation for delivering high-quality multifamily, luxury residential, and mixed-use developments. Our team is known for building complex, high-profile projects with precision, accountability, strong field execution, and a commitment to long-term client relationships and career growth from within. The Position We are hiring an experienced Senior Superintendent to lead field operations for large-scale residential and mixed-use construction projects in Redlands, CA. This is an excellent opportunity for a proven field leader with deep multifamily experience, strong tenure, and a background working with reputable national or large regional builders. The ideal candidate will bring 15+ years of construction experience with a strong track record overseeing high-end luxury apartments, multifamily communities, mixed-use developments, podium, wrap, and/or garden-style projects from sitework through final turnover. What You’ll Do • Lead all day-to-day field operations for large-scale multifamily, luxury apartment, mixed-use, and garden-style projects, • Manage site logistics, subcontractor coordination, manpower planning, sequencing, scheduling, safety, and quality control, • Drive the project schedule and ensure work is completed safely, efficiently, and to high-quality standards, • Coordinate closely with project managers, ownership, clients, architects, consultants, inspectors, and subcontractors, • Review drawings, specifications, RFIs, submittals, and project documentation to support clean field execution, • Identify and resolve field issues, constructability challenges, trade conflicts, and schedule impacts, • Lead OAC meetings, subcontractor coordination meetings, safety meetings, and daily field communication, • Maintain accurate daily reports, look-ahead schedules, field documentation, and project progress updates, • Support project closeout, punch lists, inspections, turnover, and client satisfaction, • Mentor and support assistant superintendents, field engineers, foremen, and project team members Job Qualifications • 15+ years of construction field leadership experience preferred, • Background as a Senior Superintendent, Lead Superintendent, General Superintendent, or Superintendent, • Strong experience with high-end luxury apartments, multifamily, mixed-use, podium, wrap, and/or garden-style projects, • Experience working for national general contractors, large regional builders, multifamily developers/builders, or key direct competitors strongly preferred, • Proven ability to lead complex projects from sitework through closeout, • Strong tenure and career stability with reputable construction firms, • Excellent leadership, communication, organization, and problem-solving skills, • Ability to manage subcontractors, field teams, schedules, logistics, inspections, safety, and quality control, • Strong understanding of construction sequencing, building systems, site logistics, trade coordination, and project delivery, • Polished, professional, and able to interface effectively with ownership, clients, architects, consultants, inspectors, and internal teams What’s Offered • Competitive base salary: $200,000–$240,000, depending on experience, • Bonus/performance incentives, • Competitive full benefits package: Medical, Dental, Vision, • 401(k) with company match, • Generous PTO, vacation, sick, and personal time, • Long-term career advancement opportunities, • Stable project pipeline with high-quality multifamily and mixed-use work, • Opportunity to lead impactful, large-scale projects with a respected construction team Apply Today Apply directly to this job ad with your updated resume, then email it to the recruiter listed below for a prompt review and consideration. Recruiter: Adam Boals Email: adam.boals@bancroftsp.com Explore Active Opportunities We encourage you to continue checking our Careers Page and follow us via LinkedIn. We're consistently posting active opportunities, market insights, trends, and recruiter tips. • BancroftSP.com/Careers/, • LinkedIn – Bancroft Staffing Partners Equal Opportunity Statement: Bancroft Staffing Partners is an equal opportunity employer. We celebrate diversity & are committed to creating an inclusive environment for all employees & candidates, regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.