Contract manufacturing jobs in Westfield, New JerseyCreate job alerts

Job Description About Tonix* Tonix is a fully integrated biotechnology company, publicly traded on NASDAQ (ticker: TNXP), with marketed products and a pipeline of development candidates The Company is focused on commercializing, developing, discovering, and licensing therapeutics to treat and prevent human disease. In August 2025, Tonix received FDA approval for Tonmya™ (cyclobenzaprine HCl sublingual tablets), a first-in-class, once-daily, non-opioid treatment for fibromyalgia. Tonmya is the first new fibromyalgia therapy approved in over 15 years, following successful Phase 3 trials demonstrating significant symptom improvement. Commercial launch is expected in the fourth quarter of 2025. Tonix also markets Zembrace® SymTouch® (sumatriptan injection) 3 mg and Tosymra® (sumatriptan nasal spray) 10 mg, both indicated for the treatment of acute migraine with or without aura in adults. Tonix’s development portfolio includes product candidates in central nervous system (CNS), immunology, immuno-oncology infectious disease and rare disease. The CNS pipeline features both small molecules and biologics to treat pain, neurologic, psychiatric, and addiction conditions. The immunology portfolio includes biologics to address organ transplant rejection, autoimmunity, and cancer. The infectious disease pipeline includes a vaccine in development to prevent smallpox and monkeypox, which also serves as a live virus vaccine platform for other infectious diseases. Finally, the rare disease portfolio includes a product in development for Prader-Willi syndrome, which has both orphan drug designation and rare pediatric disease designation grants from the FDA. Tonix owns and operates a state-of-the art infectious disease research facility in Frederick, Md. Please visit for specifics on the pipeline. *All of Tonix’s product candidates are investigational new drugs or biologics and have not been approved for any indication. Position Overview The Regulatory Affairs Specialist – CMC is responsible for supporting global regulatory submissions and lifecycle management activities related to the chemistry, manufacturing, and controls (CMC) components of drug development. This role ensures that all CMC documentation complies with applicable regulatory requirements and company standards, enabling timely approvals and continued product compliance. Essential Duties and Responsibilities • Prepares and/or coordinate activities for investigation and new product registrations, post approval changes, renewals, annual reports, and extension applications ensuring on-time and high-quality global submissions., • Interface with external Contract Manufacturing Organizations (CMO) and relevant functional teams in obtaining the necessary CMC documentation in support of a regulatory submission., • Execute preparation of timely responses to CMC regulatory questions in coordination with Subject Matter Experts (SME) as needed., • Reviews and assesses change control requests pertaining to CMC aspects and coordinates filing strategies with minimal assistance; attend change control meetings as regulatory-CMC representative., • Maintain submission information according to the document management system, track regulatory commitments & timelines for specific projects/products/markets with minimal supervision., • Maintain sound knowledge of regulations, policies/guidelines, and keep abreast with current and evolving regulatory CMC requirements., • Familiarity with global CMC regulations, including ICH requirements and US/EU regulatory guidances., • Experience in authoring technical documents, CTD M2 and M3 sections., • Experience with post-approval CMC changes and lifecycle management., • Strong oral and written communication skills with superior attention to detail., • Demonstrates initiative and is proactive; ability to work independently and within a team setting., • Minimum of a bachelor's degree in a relevant field (e.g., Life Sciences, Pharmacy, Chemistry)., • 4 + years of experience in Regulatory Affairs specifically with Small Molecules focused on Regulatory CMC. Tonix does not accept agency resumes unless contacted directly by internal Tonix Talent Acquisition. Please do not forward resumes to Tonix employees or any other company location; Tonix is not responsible for any fees related to unsolicited resumes. Compensation & Benefits Annualized base salary ranges from $70,000 to $120,000 plus target incentive; actual salaries will vary and may be above or below this range commensurate with several factors including experience, education, training, location, and merit. Tonix provides a comprehensive compensation and benefits package which includes: • Medical, Dental & Vision Insurance, Basic and Voluntary Life and AD&D Insurance, Short- and Long-Term Disability Insurance, Flexible Spending Accounts, Health Savings Account, and Employee Assistance Programs, • Pet Insurance, • Retirement Savings 401k with company match and annual discretionary stock options, • Generous Paid Time Off, Sick Time, & Paid Holidays

JOB TITLE: Assistant Process Engineer Location: Summit or Warren, NJ (50% onsite) Duration: 6 months initial (potential extension/potential right to hire) Job Purpose / Position Summary The client is a global biopharmaceutical company leading the way in medical innovation to help patients live longer, better lives. Our purpose as a company is to discover and develop therapies that will change the course of human health. We value our passion for patients, quest for innovation, spirit of independence and love of challenge. With a presence in more than 70 countries and growing - we look for talented people to grow our business, advance our science and contribute to our unique culture. We are developing novel cellular immunotherapies based on two distinct and complementary platforms – Chimeric Antigen Receptors (CARs) and T Cell Receptors (TCRs) technologies. Our goal is to revolutionize medicine by re-engaging the body’s immune system to treat cancer. We are looking for a Associate Engineer to join the raw materials team within the CTTO (Cell Therapy Technical Operations) department. The Raw Materials team is responsible for management of end-to-end raw materials including buffers, reagents, media, single-use system and lentiviral vector. This includes but is not limited to vendor management, change control partnership with the vendors, proactive process monitoring using statistics, deviation management, process improvements to support CAR-T therapies during late stage clinical, tech transfer, and commercial production. Responsibilities include, but are not limited to, the following: ● Support as a SME for raw materials including single-use systems (SUS) and material sciences. ● Provide technical support on in CAR-T commercial manufacturing. ● Lead projects involving the introduction and qualification of materials, second sourcing efforts, and development of material specifications. ● Collaborate cross-functionally to execute risk mitigations and initiatives to improve the quality and supply chain robustness of existing raw materials. ● Deliver strategies for prioritizing and executing raw material projects, including the establishment and improvement of internal standards and business processes. ● Vendor management including change controls, audits, deviations, and QRM programs. ● Support investigations and ensure compliance with internal standards and requirements. ● Perform technical diligence visits to raw material supplier sites with cross-functional teams. ● Provide necessary technical analysis to support impact assessments and investigations. ● Support responses for Information Request (IR) from regulatory bodies. Skills/Knowledge Required: • B.S. with 0+ years of experience or M.S. with 0+ years relevant experience in Biochemical, Chemical, or Biomedical Engineering or Cell Biology/Immunology discipline or equivalent., • Exposure to raw materials (both liquid and single use system)., • Understanding of regulatory/compendial requirements for raw materials used in biomanufacturing., • Experience working with vendors and contract manufacturing sites., • Excellent problem-solving skills, including issue resolution, root cause investigations and CAPAs., • Data management skills and comprehension skills of technical documents, such as process description documents., • Ability to assess risk and develop contingency plans for process risks., • Ability to effectively work in cross functional teams, meet deadlines, and prioritize responsibilities., • Detail oriented with excellent verbal and written communication skills., • Strong interpersonal and leadership skills to work with teams in different functions and organizations., • Experience with Quality Management System (Ex. Deviation, CAPA, Change Management)., • Knowledge of GMP manufacturing practices and documentation requirements. PREREQUISITES Experience in Single Use Systems, GMP experience, Data Management Additional Skills: • Understanding of key considerations for single-use containers used for raw materials., • Familiarity with raw material supply chains and manufacturing methods., • Data management and grasp apprehension of technical instructions, • Lean Manufacturing experience is desired. If hired, you will enjoy the following Eclaro Benefits: • 401k Retirement Savings Plan administered by Merrill Lynch, • Commuter Check Pretax Commuter Benefits, • Eligibility to purchase Medical, Dental & Vision Insurance through Eclaro If you feel you are qualified with the required skills and if you are interested, please free to send your word version most updated resume TAILORED to the job description above to or call (212)804-7476. Equal Opportunity Employer: Eclaro values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance Position Overview A fast-paced, refrigerated food manufacturing and distribution facility is seeking an experienced Maintenance Supervisor to lead its maintenance team. This role is responsible for overseeing daily mechanical and electrical maintenance activities, ensuring minimal production downtime, and driving a culture of safety, preventive maintenance, and continuous improvement. Key Responsibilities • Supervise a team of maintenance technicians across multiple shifts, providing direction, training, and performance feedback, • Lead mechanical troubleshooting, repair, and preventive maintenance activities on conveyor systems, motors, gearboxes, pneumatics, VFDs, photoeyes, sensors, and other production equipment, • Coordinate and prioritize work orders to minimize production downtime and meet operational goals, • Oversee electrical diagnostics, including wiring, control panels, PLCs, and 3-phase systems (role split: ~70% mechanical, ~30% electrical), • Manage the preventive maintenance (PM) program, ensuring schedules are followed and maintenance records are accurately kept, • Collaborate closely with production, sanitation, and quality teams to ensure equipment operates safely and efficiently in compliance with GMP, OSHA, and food safety standards, • Assist in vendor coordination, spare parts inventory, and capital project support, • 5+ years of maintenance experience in a manufacturing or food production environment, with at least 2 years in a supervisory or lead role, • Strong mechanical troubleshooting and repair skills; solid electrical knowledge preferred, • Experience working with conveyors, motors, gearboxes, pneumatic systems, and production equipment, • Familiarity with PLC troubleshooting, VFDs, control systems, and basic electrical diagnostics, • Strong organizational and communication skills, with the ability to manage competing priorities in a high-pressure setting, • Experience using preventive maintenance systems (CMMS) and applying maintenance best practices, • Knowledge of GMP, OSHA, and food safety compliance standards, • Previous experience in refrigerated or food manufacturing environments, • Bilingual (English/Spanish) a plus, • Technical certifications in mechanical, electrical, or automation systems

Job Description URGENTLY HIRING Electro Mechanical Maintenance Technician (All Shifts Available!) Send your resume to jpiacquadio @ aerotek.com for the fastest response! Pay: $36 - $39 per hour Shifts: 1st, 2nd, and 3rd (apply for shift times) Location: New Brunswick, NJ Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use multimeters, oscilloscopes, and other diagnostic tools., • Follow SOPs and maintain clean, safe workspaces., • Experience in industrial maintenance or electro-mechanics., • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to troubleshoot and work independently under pressure., • Familiarity with CMMS systems and Microsoft Office., • Electrical systems knowledge and ability to read electrical schematics., • Associate’s degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience is acceptable for some roles., • Experience in a manufacturing or food production environment., • Prior work with automated or robotic systems is a plus. Join a fast-paced, team-oriented environment with a global impact. We offer a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including medical, dental, vision, life insurance, 401(k), FSA, and STD/LTD. Enjoy paid time off and career development opportunities. Job Type & Location This is a Contract to Hire position based out of Westfield, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Westfield,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Source One is a consulting services company and we’re currently looking for the following individual to work as a consultant with our direct client, a global pharmaceutical consumer goods manufacturing client in Summit, NJ. No Third-Party, No Corp to Corp, No Sponsorship Title: ServiceNow (CSM) Business Analyst Location: Summit, NJ Remote (Mon-Fri, 40 hours) must be able to work in LATAM, ANZ, APAC time zones Contract Duration: 12 months, with likely extension Pay Rate: $42.00 per hour (w2) • Must Have Service Now CSM Customer Service Module experience only!, • Must Be Able to work in various times zones supporting LATAM, ANZ and APAC., • Must Have Exceptional English Speaking Communication Skills ServiceNow Business Analyst Customer Service Module (CSM) We are seeking a ServiceNow Business Analyst for a multi-million-dollar initiative to implement ServiceNow’s Customer Service Management (CSM) solution for our Call Center operations in LATAM, specifically Colombia. This role will involve collaboration with teams globally, including regions such as India, LATAM, ANZ, APAC, and potentially EMEA. Key Responsibilities: • Act as the primary Business Analyst for the implementation of ServiceNow’s Customer Service Management (CSM) module., • Collaborate effectively with system integrators (e.g., SAP, Twilio/WhatsApp/WebMethods MFT), client technical teams, business stakeholders, and the Project Manager to ensure smooth project execution., • Lead weekly project plan calls, ensuring the team remains on track and documenting meeting notes and action items., • Capture and document user stories and requirements using Agile methodologies (e.g., JIRA, Scrum, Confluence)., • Manage testing processes and ensure business engagement and participation in User Acceptance Testing (UAT)., • Develop new enhancements for the CSM module, leveraging experience with various instances of ServiceNow., • Lead architectural reviews for necessary review boards to ensure that solutions align with technical standards and business needs., • Identify and articulate project risks and concerns, knowing when to escalate issues to appropriate stakeholders., • Maintain a high-level understanding of system integrations and IT architecture models to inform project decisions., • Document weekly status reports and communications using Microsoft PowerPoint and Excel., • Liaise with Business Analysts to review platform enhancement opportunities and identify value-added initiatives. Qualifications: • 5-8 years of solid experience in business analysis, preferably within Supply Chain IT and ServiceNow CSM., • Proven ability to perform business analysis duties for ServiceNow implementations, particularly with the CSM module., • Experience with ServiceNow is mandatory; familiarity with ServiceNow Contact Center solutions is a plus., • Experience working on complex IT-led projects across multiple workstreams., • Strong collaboration and communication skills, with the ability to work effectively with diverse teams across different geographical locations., • English is a must, • Flexibility to work across various time zones to align with global project teams., • Proven experience leading architectural reviews and engaging with relevant review boards. Additional Information: • Collaborate closely with the manager to lead a capacity team based in India, primarily working on EST time to deliver continuous improvement initiatives.

Job DescriptionJob Title:Business Development Manager – Staffing & Recruiting (Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, Corporate Services) Reports To: Director of Business Development / VP of Sales Location: Remote / Hybrid Position Type: Full-time / Exempt Salary: $85,000 per year + performance based commission + Bonus About Us:Strike Force Staffing is a leading staffing and recruiting agency providing tailored workforce solutions across Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, and Corporate Services. We pride ourselves on delivering top talent to meet the critical needs of our clients. We are seeking a high-performing Business Development Manager (BDM) to drive growth and strengthen client partnerships in these sectors.Position Summary:The BDM is responsible for generating new business and managing client relationships within one or more of our key sectors: Light Industrial, IT, Healthcare, Accounting & Finance, Hospitality, or Corporate Services. This role involves the full sales cycle, from prospecting to contract negotiation, working closely with recruiters to ensure top-tier delivery.Key Responsibilities: • Identify, pursue, and secure new client accounts within target industries through prospecting, networking, referrals, and strategic outreach., • Develop and execute sales strategies tailored to sector-specific client needs., • Build relationships with decision-makers (e.g., hiring managers, HR, department heads, executives)., • Conduct needs analyses and craft customized staffing solutions (temporary, temp-to-perm, direct hire)., • Negotiate terms, pricing, and service agreements in alignment with company goals., • Partner with recruiters to ensure seamless client service and talent delivery., • Track pipeline, forecast revenue, and report activity using the CRM., • Represent the company at industry events, conferences, and trade shows.Requirements:Education:, • Bachelor’s degree preferred (business, marketing, human resources, or related field) or equivalent work experience.Experience:, • 3+ years of B2B sales or business development experience in staffing, recruiting, or workforce solutions., • Demonstrated success selling staffing services in at least one of the following:, • Light Industrial (e.g., warehouse, manufacturing, distribution), • IT (e.g., software development, infrastructure, support), • Healthcare (e.g., clinical, allied health, administrative support), • Accounting & Finance (e.g., CPAs, financial analysts, AR/AP), • Hospitality (e.g., food service, housekeeping, front desk), • Corporate Services (e.g., administrative, customer service, call centers), • Strong knowledge of contingent labor, direct hire, and workforce management models., • Experience managing the full sales cycle, from lead generation to contract execution.Skills & Attributes:, • Excellent communication, negotiation, and presentation skills., • Ability to build rapport and credibility at all organizational levels., • Goal-driven, with strong problem-solving abilities., • Organized, detail-oriented, and capable of managing multiple priorities., • Proficient in CRM tools (e.g., Salesforce, Bullhorn, Avionté) and Microsoft Office.Compensation:, • Competitive base salary + uncapped commission, • Performance bonuses, • Paid Time Off and Holidays, • Professional development and career growth opportunities.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2021, Eurofins generated total revenues of EUR 6.72 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description High Throughput Process Development Scientist responsibilities include, but are not limited to, the following: • Execute high throughput process development (HTPD) experiments with BSL-1 and BSL-2 biological agents and viruses., • Operate and maintain laboratory automation equipment (Tecan, Hamilton) to support HTPD screening experiments., • Perform analytical testing, including cell-based assays, biochemical testing, and/or HPLC to support HTPD experiments, and participate in development of new assays as needed., • Prepare laboratory reagents, solutions and culture media, • Analyze, collate, track, and report data back to client staff members, • Maintain records and test results following good manufacturing practices (GMP), • Work independently and efficiently, • Document work clearly and perform tests accurately, • Communicate effectively with client staff membersQualifications Minimum Qualifications: • B.S. in Biology, Cell Biology, Bio/chemical Engineering, or related science, • One year of general lab experience working with automated handlers like TECAN and Hamilton to support assays, • General laboratory skills, with at least one year of laboratory experience, • At least six months experience with aseptic and cell culture techniques, • Experience with cell-based (imaging, flow cytometry) and biochemical analytical techniques, • Highly computer literate. Capable of quickly learning and adapting to new computer programs. Experience using formulas and linking spreadsheets in Excel., • Experience in programming/coding (e.g. equipment software, Visual Basic, C++, MatLab, or Python programming) is considered a plus., • Experience working with laboratory automation or advanced computer-controlled laboratory equipment, such as chromatography workstations (e.g. Akta), or robotic liquid-handlers (e.g. Tecan or Hamilton)., • Strong computer, scientific, and organizational skills, • Excellent communication (oral and written) and attention to detail, • Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude, • Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Additional Information This position is Full-Time, Monday through Friday, 9a.m. to 5 p.m with overtime as needed. Candidates currently living within a commutable distance of Rahway, NJ are encouraged to apply. The compensation range for this role is between $24-25/hr based on experience. • Excellent full time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job Description SOKOL GxP Services is seeking a QA Label Control Specialist (2nd Shift) to support our client’s Cell Therapy Manufacturing facility in Summit, NJ. In this role, you will execute label control, issuance, and printing activities to ensure compliance with FDA, cGMP, and internal quality standards for clinical and commercial cell therapy products. You will be responsible for preparing, verifying, and issuing in-process and final product labels, maintaining documentation accuracy, and supporting inspection readiness. This position collaborates closely with Manufacturing, Quality Assurance, Quality Control, and CTDO operations to ensure timely label delivery and error-free execution of GMP processes. This is an excellent opportunity for someone with hands-on labeling experience in a regulated biopharmaceutical environment, strong documentation discipline, and the ability to work independently on a fast-paced shift supporting patient-critical therapies. Requirements Education & Experience • Bachelor’s degree in a scientific discipline (Biology, Chemistry, or related field) – U.S. degree required, • 1+ years of labeling experience in a cGMP/FDA-regulated biopharma environment, • 1+ years of Quality experience, • 1+ years of U.S. biopharmaceutical manufacturing or QA operations experience, • 3+ years of experience using MS Office 365 (Excel, Teams, SharePoint in project/document control settings)Technical Skills, • Experience in label issuance, printing, verification, and reconciliation, • Familiarity with labeling systems; Crystal Reports or BarTender preferred, • Hands-on use of document management systems (e.g., Veeva, MasterControl, Documentum), • Understanding of change control, deviations, CAPA, investigations, and quality systems, • Ability to write, revise, and maintain SOPs, work instructions, and technical documentationCore Competencies, • Strong understanding of GMP, compliance, and data integrity, • High attention to detail and accuracy in all documentation, • Ability to recognize issues, escalate appropriately, and propose solutions, • Excellent communication and customer service mindset, • Ability to work independently on shift while collaborating with cross-functional teams, • Ability to support internal and health authority inspections through accurate documentation and retrieval, • Strong time-management skills with the ability to handle multiple priorities, • Advanced computer proficiency and comfort working within electronic systemsKey Responsibilities, • Issue and print clinical and commercial labels for manufacturing and packaging, • Ensure labels meet all regulatory and internal quality requirements, • Coordinate with production to support timely and accurate label availability, • Support document accuracy, label reconciliation, and tracking activities, • Maintain and update SOPs, label control procedures, and documentation, • Provide training for personnel on label issuance processes, • Support audits, inspections, and quality investigations as required Competitive hourly rate: $27.52 – $34.96/hr (W-2 only, no C2C). Working Hours: 2nd Shift , Wed-Sat - 4pm-2am. 6-month contract with possibility of extension or conversion for the right candidate depending on performance. Health insurance, holiday pay, 401(k) program, and other benefits. Employee referral bonus program.

Job Description Description TITLE Senior Project Manager, PIM GENERAL SUMMARY OF POSITION The Senior Project Manager, PIM is a critical role responsible for driving an AnsellGUARDIAN data migration, review, and enhancement project that involves Product Information Management (PIM) systems, data integrity, and digital enablement. This position will play a central role in managing a complex, multi-phase data migration, review, and analysis project involving critical product and industry data that powers the AnsellGUARDIANTM safety algorithm. The role requires hands-on experience managing large-scale data initiatives, exceptional project planning and communication skills, and deep technical familiarity with Salsify PIM. The Senior Project Manager will be accountable for maintaining project momentum, coordinating cross-functional and global stakeholders, and ensuring timely delivery of high-quality, validated product data across the Ansell digital ecosystem. RESPONSIBILITIES • Project Planning & Execution, • Lead end-to-end planning and delivery of PIM-related projects, including data migration, data cleansing, and data validation activities., • Maintain and update detailed project action trackers, ensuring all deliverables, owners, and timelines are clearly defined and communicated., • Oversee daily and weekly project reporting, proactively identifying risks, dependencies, and roadblocks., • Coordinate testing, validation, and approval phases for all PIM data activities, ensuring readiness for integration with the Guardian platform., • Stakeholder Engagement & Communication, • Serve as the primary communication bridge between Digital, IT, Category Manager, Vertical Expert, and Guardian program teams., • Facilitate global meetings and steering sessions, summarizing progress, risks, and decisions for senior leadership., • Translate technical and data management topics into actionable updates for non-technical audiences., • Maintain transparent and timely communication across teams to support alignment, accountability, and informed decision-making., • Product Information Management Leadership, • Oversee data structuring, taxonomy management, and enrichment workflows within the Salsify PIM environment., • Partner with IT and business owners to design and execute efficient data migration processes from legacy systems to Salsify., • Support data governance and ensure compliance with industry standards, data models, and integration requirements., • Collaborate with the Platform Product Manager, AnsellGUARDIANTM, to align product data readiness with algorithmic and analytical needs., • Cross-Functional Collaboration, • Work closely with engineering, product, and regional commercial teams to ensure PIM data integrity supports digital sales, eCommerce, and Guardian capabilities., • Provide project leadership for third-party vendors, consultants, and regional data teams contributing to PIM projects., • Establish and continuously refine global best practices for PIM data management and project governance. KEY POSITION REQUIREMENTS Education • Bachelor’s degree in Business Administration, Information Systems, Engineering, or related field required., • PMP certification or equivalent project management credential preferred. Job Experience • 7+ years of experience managing large-scale digital, IT, or data projects., • Strong familiarity with Product Information Management systems, specifically Salsify PIM., • Proven track record in data migration, data governance, and change management projects., • Experience managing global cross-functional teams and external vendors., • Knowledge of industrial, manufacturing, or healthcare product data environments preferred Knowledge and Skills • Expert-level project management skills with proficiency in project tracking and reporting tools (e.g., Smartsheet, MS Project, Jira)., • In-depth understanding of Salsify data structures, workflows, and syndication., • Strong analytical mindset with the ability to evaluate large data sets for completeness and accuracy., • Excellent written and verbal communication skills; able to simplify complex information for broad audiences., • Ability to manage competing priorities in a fast-paced, global matrix environment., • Languages: Fluent English (written and spoken). DESIRABLE JOB COMPETENCIES • Ownership & Accountability – Takes proactive control of project outcomes, ensuring deliverables meet scope, timeline, and quality standards., • Communication & Transparency – Provides clear, concise, and consistent communication across stakeholders and leadership teams., • Technical Acumen – Demonstrates detailed understanding of Salsify PIM and related data integration processes., • Structured Problem Solving – Identifies issues early, proposes actionable solutions, and drives cross-functional alignment., • Collaborative Leadership – Builds productive relationships across functions and regions, fostering trust and shared ownership of results., • Global Agility – Adapts to time zone differences, cultural contexts, and evolving priorities with flexibility and professionalism. ADDITIONAL REQUIREMENTS • This is a 9-12 month contract role, • Occasional travel (up to 10%) for cross-regional collaboration, data workshops, or platform integration support., • Participation in global Guardian data governance and performance review initiatives.

Valcor Engineer Corp. is a world leader in the design and manufacture of solenoid valves and flow control components for liquids and gases in critical applications, for aircraft, military, aerospace, nuclear, light industrial and scientific industries. CNC Programmer Duties and Responsibilities Include but Are Not limited to the Following: \n • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs.\n, • Programming in Mastercam.\n, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC.\n, • CAD in Solidworks.\n, • Read, analyze, and interpret blueprint drawings/specifications.\n, • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc.\n, • Organize and maintain programs, setup sheets, and revisions to both.\n, • With machine operator or independently, conduct first run prove outs.\n, • High School or equivalent. Tech school and / or college is a plus. \n, • Minimum 8 years of machining experience with a minimum of 4 years of programming.\n, • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs.\n, • Be able to take part in employee relations at the shop level including adherence to labor contract provisions.\n Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics.

Job Description Who We Are: CSI International Inc, founded in 1989 and headquartered in Ft. Lauderdale, FL, provides integrated building services to clients in real estate, property management, pharmaceuticals, telecommunications, higher education, manufacturing, and insurance. Throughout CSI International Inc.’s constant growth and evolution, our primary goal – exceeding our clients’ expectations – has remained unchanged. Because of this, we enjoy an incomparable reputation for cost-effective solutions with responsive services with uncompromising quality. What you’ll be doing: We are looking for a reliable and professional night cleaner to keep our facilities clean. You will be responsible for maintaining a clean facility by completing a variety of cleaning tasks to keep the buildings looking perfect. You will be tasked with keeping facilities clean in the evenings, potentially locking doors, and arming alarms. To work well in this role, you should have some cleaning experience and basic knowledge of various cleaning products. Night Cleaner Responsibilities: • General cleaning of the building and keeping it maintained and in good condition., • Vacuum, sweep, and mop floors., • Cleaning and stock restrooms., • Empty trash and recycling bins., • Remove debris and snow from sidewalks., • Ensure doors are locked after hours., • Clean up spills with appropriate equipment., • Lock up the facility, potentially arming alarms, independently., • Notify supervisors or managers of major repairs., • Complete tasks in a timely manner with minimal supervision., • Keep cleaning supplies in stock., • Work with a contract cleaning service when necessary., • Other responsibilities as assigned by your supervisor. Night Cleaner Requirements: • Ability to manage your time efficiently., • Work well when supervisors are not present., • Able to communicate any potential problems to supervisors quickly., • Able to work safely with a variety of cleaning supplies., • Able to work independently or with a team., • Able to use basic cleaning equipment., • High school diploma, GED, or suitable equivalent., • Authorized to work in the U.S. – We Use E-Verify ***CSI International, Inc. is committed to fostering, cultivating, and preserving a culture of diversity and inclusion. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Our commitment extends beyond preventing discrimination and harassment; it’s about creating an environment where diverse backgrounds and perspectives are valued. We believe in the power of our people, the ideas they bring, and what we can accomplish together. ***Consistent with the Americans with Disabilities Act (ADA), all state & federal requirements, it is the policy of CSI International, Inc. to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. CSI International, Inc. also provides reasonable accommodations as required under the Pregnant Workers Fairness Act (PWFA) for limitations related to pregnancy, childbirth, or related medical conditions. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact the Recruitment Team at 813-425-1985. Monday - Friday 5:00PM - 9:00PM

Job Title: Technician – Module Lab Location: South Plainfield, NJ Work Model: Onsite – Contract to Hire Hours: Monday–Friday, 8AM to 430PM Pay: $20–$22/hour TECHNICIAN – MODULE LAB This is a training-based, cleanroom-friendly role ideal for candidates looking to break into high-tech manufacturing, even if they come from non-traditional or unrelated backgrounds. Full training is provided, and the company offers growth potential into engineering-level roles. RESPONSIBILITIES: Monitor automated production equipment and assist with light assembly. Follow cleanroom protocols (gowning required) and standard operating procedures. Visually inspect photonic components and support basic handling tasks. Log basic production data and notify supervisors of abnormalities. Keep the workstation and cleanroom area organized and compliant. Work with engineers and technicians as part of a collaborative, high-precision team. QUALIFICATIONS: High school diploma required; Bachelor’s degree strongly preferred No prior photonics or cleanroom experience necessary — training provided. Must be detail-oriented, reliable, and comfortable with repetitive tasks. Strong English communication skills required. Mandarin fluency is a plus, but not required. Great fit for candidates with experience in sterile environments, nursing, manufacturing, cleaning, or quality-driven roles. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #m1 Ref: #562-Joule Staffing - Edison

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Job Description Job Title: Cherry Picker Job Description Join a dynamic team as a Shipping and Receiving Clerk at our South Plainfield location. We are seeking individuals comfortable working in narrow aisles, with heights, and proficient in using RF scanners. Responsibilities • Operate reach trucks and forklifts to manage shipping and receiving tasks., • Consistently lift boxes weighing up to 50 lbs., • Perform general labor tasks within the warehouse environment., • Experience in operating reach trucks and forklifts., • Proficiency with RF scanners., • Ability to consistently lift 50 lbs., • Punctuality and strict adherence to attendance policies., • Ability to present oneself in a professional manner. Enjoy comprehensive medical, vision, and dental benefits. Receive 11 uniforms per year with on-site laundry services, plus an annual allowance for steel-toed boots. All necessary personal protective equipment is provided. Work Environment Work in a warehouse setting with narrow aisles and occasional height requirements. The role involves handling equipment such as reach trucks and forklifts, and the dress code includes steel-toed boots provided through a company allowance. Job Type & Location This is a Contract to Hire position based out of South Plainfield, NJ. Pay and Benefits The pay range for this position is $22.50 - $23.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Dec 15, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. we are seeking a proven Switchgear Project Manager to join its dynamic team and the growing organization. This role is available immediately and provides a great growth opportunity for the right candidate. It is a full-time, exempt position, and the candidate will report directly to the Project Manager-Supervisor. The successful candidate will be responsible for the initial design and project Management Of Electrical Distribution Equipment, including Panelboards, Switchboards, and Circuit breakers. At Lincoln Electric Products Co. Inc., Project Management begins at Stage 1, which is Engineering. This means the Project Manager is involved right from the start of the project lifecycle, leading the coordination of engineering activities, ensuring design specifications are met, and setting the foundation for successful execution. It's a hands-on role that combines technical understanding with cross-functional leadership. Job Responsibilities • Focus is switchgear projects for commercial construction, commercial facilities, and OEMs., • Collaborate with sales, engineering, and manufacturing teams., • Designing and drawing Switchboards/ Panelboards., • Reviewing outgoing engineering submittal drawings for technical and contractual accuracy., • Evaluating and interpreting customer specifications and drawings to create an accurate bill of materials., • Providing phone support and direct interaction with customers and employees to obtain sales, • Reviewing returned drawings and submittals of same, analyzing and processing mark-up/comments, and communicating changes to the internal and external stakeholders, • Review contract documents, interpret technical specifications to ensure product compliance, and prepare change order pricing and quotations if needed., • Coordinate and facilitate the completion of Short Circuit and Coordination Studies., • Releasing equipment for production and delivery to an in-house shop., • Coordinating deliveries with customers., • Enter orders into the company ERP software system., • Configure and order long lead time major materials/components for the project., • Perform visits to survey site layout and logistical challenges as needed., • Provide post-sales support for equipment. Requirements: Job Requirements • Bachelor’s degree in Electrical Engineering., • 3+ years within the industry., • Thorough knowledge of electrical power systems, • Good knowledge of Industry UL standards and NEC standards, • Proficiency with MS Excel., • Ability to collaborate with team members.

Job Description Job Title: Forklift Operator Job Description · Replenished shelves with incoming stock orders and performed daily spot checks on inventory. · Informed supervisor of parts needed for stock and discrepancies in inventory quantities. · Moved products and equipment to appropriate locations to maintain workspace cleanliness. · Maintained company inventories and completed product counts for reports. · Interacted effectively with staff through ongoing communication and exchange of information. Essential Skills • Minimum High School diploma, • Ability to read, understand, and carry out detailed written or verbal instructions, • Proficiency in using standard hand tools, • Capability to move packages of up to 50 lbs. daily, • Strong interpersonal and communication skills The work environment operates from 8am to 4:30pm, Monday through Friday. Job Type & Location This is a Contract position based out of Metuchen, NJ. Pay and Benefits The pay range for this position is $17.00 - $18.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Metuchen,NJ. Application Deadline This position is anticipated to close on Dec 23, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are looking for a Associate Engineer to join the raw materials team within the CTTO (Cell Therapy Technical Operations) department. The Raw Materials team is responsible for management of end-to-end raw materials including buffers, reagents, media, single-use system and lentiviral vector. This includes but is not limited to vendor management, change control partnership with the vendors, proactive process monitoring using statistics, deviation management, process improvements to support CAR-T therapies during late stage clinical, tech transfer, and commercial production. Responsibilities include, but are not limited to, the following: • Support as a SME for raw materials including single-use systems (SUS) and material sciences., • Provide technical support on in CAR-T commercial manufacturing., • Lead projects involving the introduction and qualification of materials, second sourcing efforts, and development of material specifications., • Collaborate cross-functionally to execute risk mitigations and initiatives to improve the quality and supply chain robustness of existing raw materials., • Deliver strategies for prioritizing and executing raw material projects, including the establishment and improvement of internal standards and business processes., • Vendor management including change controls, audits, deviations, and QRM programs., • Support investigations and ensure compliance with internal standards and requirements., • Perform technical diligence visits to raw material supplier sites with cross-functional teams., • Provide necessary technical analysis to support impact assessments and investigations., • B.S. or M.S. in Biochemical, Chemical, or Biomedical Engineering or Cell Biology/Immunology discipline or equivalent., • Exposure to raw materials (both liquid and single use system)., • Understanding of regulatory/compendial requirements for raw materials used in biomanufacturing., • Experience working with vendors and contract manufacturing sites., • Excellent problem-solving skills, including issue resolution, root cause investigations and CAPAs., • Data management skills and comprehension skills of technical documents, such as process description documents., • Ability to assess risk and develop contingency plans for process risks., • Ability to effectively work in cross functional teams, meet deadlines, and prioritize responsibilities., • Detail oriented with excellent verbal and written communication skills., • Strong interpersonal and leadership skills to work with teams in different functions and organizations., • Experience with Quality Management System (Ex. Deviation, CAPA, Change Management)., • Knowledge of GMP manufacturing practices and documentation requirements. Prerequisites: • Experience in Single Use Systems, GMP experience, Data Management. Additional Skills: • Understanding of key considerations for single-use containers used for raw materials., • Familiarity with raw material supply chains and manufacturing methods., • Data management and grasp apprehension of technical instructions., • Lean Manufacturing experience is desired. Benefits Competitive hourly rate: $28.78 – $35.11/hr (W-2 only, no C2C) Working Hours: Monday - Friday, regular business hours 6-month contract with possible extension Health insurance, holiday pay, 401(k) program, and other benefits Employee referral bonus program

Job DescriptionJob Title: Field Service TechnicianJob Description Perform preventative maintenance and repairs on conveyor systems, motors, gearboxes, and rollers. Troubleshoot mechanical, electrical, and pneumatic issues to minimize downtime. Conduct inspections, identify worn or damaged parts, and perform replacements. Read and interpret blueprints, schematics, and technical manuals. Maintain accurate maintenance logs and comply with safety and company standards. Collaborate with operations and maintenance teams to support production schedules. Assist with equipment installations, upgrades, and process improvements. Responsibilities • Perform preventative maintenance and repairs on conveyor systems, motors, gearboxes, and rollers., • Troubleshoot mechanical, electrical, and pneumatic issues to minimize downtime., • Conduct inspections, identify worn or damaged parts, and perform replacements., • Read and interpret blueprints, schematics, and technical manuals., • Maintain accurate maintenance logs and comply with safety and company standards., • Collaborate with operations and maintenance teams to support production schedules., • Assist with equipment installations, upgrades, and process improvements.Essential Skills, • 3+ years of mechanical maintenance experience, with a preference for conveyor systems., • Knowledge of hydraulics, pneumatics, and electrical troubleshooting., • Ability to diagnose and repair mechanical/electrical issues using hand tools, power tools, and measuring instruments., • Strong communication and teamwork skills., • Ability to lift 50+ lbs and work in a physically demanding environment.Additional Skills & Qualifications Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Plainfield,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

The RealReal - 950 Convery Blvd [Warehouse Associate] As a Warehouse Technician with The RealReal, you'll: Perform direct-to-consumer order fulfillment; Perform the pick, pack, ship functions while maintaining KPM's; Safely handle and care of luxury fashions items; Pack shipments securely, following

Napa Auto Parts - [Material Handler / Freight Handler] As a Warehouse Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an

Hackensack Meridian Health - JobID: J4727b56b515449828e408525217dcbe9-1 [Warehouse Associate / Package Handler] As a Material Handler at Hackensack Meridian Health, you'll: Receive and process incoming stock and materials; Maintain inventory control and organization; Operate forklifts and other ware

GXO Logistics - JobID: 1348608700 [Warehouse Associate / Package Handler] As a Material Handler at GXO Logistics, you'll: Support operations by moving material and inventory throughout the facility; Use hand trucks, conveyors or other material handling equipment; Perform duties that may include pack

At Phillip Jeffries, we believe beautiful design begins with passion, integrity, and connection.What started in 1976 as a small family business with just ten grasscloths in a New Jersey garage has grown into a global luxury brand offering more than 1,000 wallcoverings to designers and architects aro

Our Client is looking to hire a full time, Direct Hire.Bachelor's degree in supply chain management, Business Administration, Operations, or a related field.Strong expertise in Microsoft Excel.Extensive experience with ERP/MRP systems.Solid understanding of capacity planning, materials management, a

Preferable trained in lean manufacturing techniques. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets.

JobID: J3V82062QYMSN9MQH79 [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

Napa Auto Parts - [Material Handler / Freight Handler] As a Warehouse Associate at Napa Auto Parts, you'll: Expedite incoming and outgoing freight in the warehouse; Receive, stock, pull, stage, load and ship freight; Process inventory and maximize warehouse space usage; Check, verify, load, stock an

Floor & Decor - Job Posting [Material Handler / Freight Handler] As a Warehouse Associate at Floor & Decor, you'll: Receive the product off delivery trucks and stock the warehouse in an organized fashion; Ensure the sales floor is stocked and ready for customers the next day; Be knowledgeable of rec

Warehouse [Material Handler / Freight Handler] As a Warehouse Associate at Wayfair, you'll: Unload and receive inbound furniture orders; Repeatedly lift up to 75 pounds unassisted and maneuver product 150+ pounds unassisted or via team lift; Use scan technology to document pertinent carton level inf

KENCO - JobID: JR100522 [Material Handler / Freight Handler] As a Warehouse Associate at KENCO, you'll: Organize and maintain inventory in warehouse; Operate forklift to move materials; Pick and pack orders for shipment; Load and unload trucks; Perform quality control checks on products; Assist with

At L'Oréal Operations, we create innovative, inclusive, and sustainable beauty together with our business partners by designing, developing, sourcing, manufacturing, and distributing over 6 billion products globally every year. Relevant experience in project management, manufacturing practices and

Americold - JobID: 57980 [Warehouse Associate / Forklift Operator] As a Forklift Operator at Americold, you'll: Operate forklift to move and stack materials; Load and unload trucks; Maintain inventory accuracy; Follow safety procedures; Keep work area clean and organized; Assist with other warehouse

Essential Duties & Responsibilities.Key roles & responsibilities of the position include, but are not limited to -.Primarily responsible for receiving, shipping and other warehouse functions and processes (e.GMP, quality and safety compliance.Receiving & verifying the purchased goods against purchas

CVS Health - 180 Passaic Avenue [Retail Associate / Team Member] As an Inventory Control Coordinator at CVS, you'll: Coordinate and manage inventory control processes; Ensure accurate and timely inventory counts; Analyze data to identify trends and make recommendations for improvement; Collaborate w

Manufacturing/logistics processes preferred. Experience with relative responsibilities in a manufacturing environment is required.

Accountemps - JobID: 02720-0013347189-usen [ Accountemps' industry expertise will help you find positions well-matched to your unique skill set and requirements.Above all, we want to help you find a job that makes you happy and allows you to thrive while ensuring you top pay, great benefits and free

We're looking for a highly organized and proactive Operations Coordinator to support our Operations Supervisor in driving efficiency across all administrative, operational, project, and purchasing activities.In this role, you'll be the go-to connection between departments, vendors, and customers —

GXO Logistics - JobID: 1347592900 [Warehouse Associate / Package Handler] As a Material Handler at GXO Logistics, you'll: Support operations by moving material and inventory throughout the facility; Use hand trucks, conveyors or other material handling equipment; Perform duties that may include pack

COSTCO DRIVE [Production Operator / Assembly Line Worker] As a Production Assistant at Costco, you'll: Work with a team assisting the machine operator in packaging and/or developing various items throughout the location, and shipping finished products; Support production workflows by preparing mater

McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices.

Support and implement Supplier Relationship Management with key suppliers to maximize supplier performance, ensure contract compliance and delivery of contractual commitments, and optimize supplier capabilities to address business requirements. Develop and execute category strategies for manufacturi

COSTCO DRIVE [Production Operator / Machinist] As an Equipment Machine Operator at Costco, you'll: Operate production machinery and ensure that quality, consistency, cleanliness, and safety standards are met; Monitor equipment functions to ensure safe and efficient operation; Adjust machine settings

Seeking a highly motivated individual looking to start their career in fiber-optic manufacturing. Ready to shape the future of photonics manufacturing with us?.

About the job 360-03 Site Lead for Warehouse.A leading online marketplace for buying and selling authentic sneakers, streetwear, collectibles, electronics, and luxury accessories.Our customer has revolutionized the secondary market by combining a transparent and data-driven approach, giving buyers a

The primary purpose of the Inventory Control Technician position is to check supplies and reconcile orders.Produces analysis lists and reports of inventory items.Performs expiration checks and recalls.Monitors that supplies are being charged out before leaving warehouse.Creates product labels for Ge

Job Description**: As a Material Handler at DHL, you will be responsible for moving and handling materials and products within the warehouse.This includes loading and unloading materials from delivery vehicles, operating forklifts and other machinery, and ensuring that all materials are stored corre

Partners Personnel - JobID: wayne-2nd-shift-material-handler [Warehouse Associate / Package Handler] As a Material Handler at Partners Personnel, you'll: Load and unload materials efficiently; Operate forklifts and other machinery safely; Inspect materials for quality and report discrepancies; Maint

Kohl's - 333 Route 18 [Custodian / Porter / Cleaner] As a Janitor at Kohl's, you'll: Clean all areas of the store such as floors, windows, restrooms, trash receptacles; Utilize only approved chemicals, supplies, and equipment to ensure a safe and clean environment; Maintain levels of company-approve