Offres development engineer à Medford, New YorkCréer des alertes d'emploi

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionElectrical Design Engineer - CPU & DDR Board Design Job Title: Electrical Design Engineer - CPU & DDR Board Design Location: Bohemia, NY on-site Salary: $80k-$140k /yr depending on experience Requirements: BSEE or higher, 3+ yrs exp in Electrical Design, Circuit Design involving CPU's, microprosessors, DDR memory, oscilloscopes Position Overview We are seeking an experienced Electrical Design Engineer specializing in Circuit Design with CPU and DDR Board design to join our innovative team. The ideal candidate will be responsible for designing and implementing electrical circuits for a variety of applications, ensuring they meet specifications and standards. Key Responsibilities • Design and develop electrical circuit schematics and layouts., • Conduct simulations and analysis of circuit designs using industry-standard software., • Collaborate with cross-functional teams to integrate circuit designs into larger systems., • Perform testing and validation of electrical designs to ensure functionality and reliability., • Troubleshoot and debug circuit issues as they arise during development and production., • Prepare documentation for designs, including specifications, test plans, and reports., • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in circuit design and development., • Strong understanding of electrical engineering principles and practices., • Proficiency with oscilloscopes and other electrical testing apparatus., • Familiarity with PCB design and schematic capture tools is a plus., • Experience in analog and digital electronics design., • Knowledge of simulation software such as Spice, VHDL, or Verilog is desirable., • Competitive Salary depending on experience, • Annual bonus (prorated in the first year), • Medical, dental, and vision coverage, • 401(k) plan with company match, • Paid Vacation: 2 weeks to start (prorated in the first year), • 9/80 summer schedule (discretionary), • Paid winter break, • Amazing company culture, • Career Growth, • and more! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/24/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionHardware Design Engineer FPGA/Analog Job Title: Hardware Design Engineer - FPGA/Analog Location: Suffolk County, NY on-site Salary: $85k-$140k DOE Requirements: BSEE or related degree, 3+ years experience in Mixed Signal Embedded HW design, PCB, FPGA/VHDL development Position Overview We are seeking a talented Hardware Design Engineer with a strong background in FPGA and Analog design to join our innovative engineering team. The ideal candidate will contribute to the development of cutting-edge hardware solutions, ensuring high performance and reliability in our products. Key Responsibilities • Design and develop PCB layouts for complex electronic systems, • Implement FPGA designs using various hardware description languages such as Verilog and VHDL, • Conduct simulations and timing analysis to validate designs, • Collaborate with cross-functional teams to integrate analog and mixed-signal components into designs, • Debug and troubleshoot hardware issues in prototypes and production units, • Conduct signal processing analysis and optimize circuit designs for performance, • Document designs and create detailed specifications and reports, • BS in Electrical Engineering or a related fieldor related, • 3+years exp in PCB design and layout, Mixed-Signal Embedded Hawdware Design, • Proficiency in FPGA development and design methodologies, • Solid understanding of electrical engineering principles and mixed-signal design, • Experience with Verilog, VHDL, and other hardware description languages, • Familiarity with digital design, synthesis, and simulation tools, • Knowledge of circuit design and signal processing techniques, • Experience with ORCAD, LTSpice, and Vivado is a plus, • Strong problem-solving skills and attention to detail, • Competitive Salary, • Medical/Dental/Vision, • Life and AD&D, • 401(k) with matching, • Vacation, • PTO/Sick Time, • Tution Reimbursement, • Annual Bonus, • Career and Education development, • Schedule Flexibility, • and More! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/20/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionJob Opportunity: Civil Engineer Please book a time to meet with me: Build Communities. Shape Sites. Grow Your Career. We’re looking for a motivated Civil Engineer to join our collaborative, woman-owned engineering firm. In this role, you’ll take projects from early concept through construction, working on a diverse portfolio of land development, residential, and site civil design projects throughout New York State and New York City. If you enjoy solving complex design challenges, collaborating with multidisciplinary teams, and seeing your work come to life in the field, this is an excellent opportunity to grow your career in a fast-paced, supportive environment. What You’ll Do • Lead and support civil site design projects from concept through construction., • Prepare comprehensive design plans, including:, • Site layout and grading, • Drainage and utility systems, • Stormwater management systems, • Erosion and sediment control, • Perform stormwater management analysis and design, including hydrologic and hydraulic modeling, in compliance with NYSDEC and NYCDEP standards., • Develop erosion and sediment control plans, prepare permit applications, and coordinate with local and state regulatory agencies., • Produce detailed engineering drawings and construction documents using AutoCAD and Civil 3D., • Conduct site visits and field assessments, collaborating closely with contractors, architects, and other project stakeholders., • Assist with engineering reports, technical analyses, specifications, and cost estimates., • Minimum 3+ years of experience in land development and site civil design., • Strong proficiency in AutoCAD and Civil 3D., • Hands-on experience with stormwater management, grading, drainage design, and erosion & sediment control design and permitting., • Experience working on projects in both New York State and New York City.Why Join Us, • Be part of a woman-owned, fast-growing engineering firm., • Join a close-knit team of approximately 30 engineers working on technically challenging projects., • Work on a diverse project portfolio with a strong backlog that ensures steady, meaningful work., • Enjoy real opportunities for professional growth, responsibility, and advancement., • Gain exposure to complex projects from design through construction.Work Environment, • Office hours: 8:30 AM – 5:30 PM, • Lunch: 1-hour break Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Position: Senior Hardware Engineer – Advanced Electronics Systems Overview A technology-driven organization developing advanced electronic systems is seeking a Senior Hardware Engineer to lead the design, development, and validation of high-performance communications hardware. This is a hands-on technical leadership role responsible for guiding circuit card assembly (CCA) development from concept through production release. The position offers the opportunity to work on complex hardware platforms, collaborate with multidisciplinary engineering teams, and contribute to innovative product development. The ideal candidate is an experienced hardware engineer who enjoys solving challenging technical problems, improving design processes, and mentoring other engineers. Key Responsibilities Hardware Design & Development • Lead the design and development of circuit card assemblies (CCAs) from concept through production release, • Translate system and product requirements into hardware specifications and architectures, • Perform component selection, schematic capture, and oversight of PCB layout, • Develop and execute hardware test plans, simulations, and validation procedures, • Perform debugging and root-cause analysis of hardware issues during development, prototype builds, and production, • Work closely with mechanical engineering, FPGA/IP developers, and system engineering teams to integrate hardware into larger platforms, • Support project planning activities including requirements definition, scheduling, and engineering estimates, • Prepare and maintain technical documentation including schematics, design reports, test results, and engineering change documentation, • Provide technical guidance and mentorship to junior engineers Required • Bachelors or Masters degree in Electrical Engineering or Computer Engineering, • 8–15 years of hardware design experience, • Experience designing complex hardware platforms incorporating FPGAs and microcontrollers, • Proficiency with schematic capture and PCB design tools (Cadence OrCAD / Allegro preferred), • Experience with high-speed digital interfaces such as PCI/PCIe, USB, or Ethernet, • Strong understanding of analog and digital circuit design, signal integrity, power design, and thermal considerations, • Experience supporting DO-254 hardware development processes, • Familiarity with environmental testing including thermal, shock, and vibration, • Knowledge of MIL-STD-1553 and ARINC-429 communication interfaces This role collaborates with multidisciplinary engineering teams focused on delivering high-performance electronic systems. The organization offers opportunities to work on technically challenging projects while contributing to the development of innovative hardware platforms.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. Lead Engineer – Advanced Data Science for Aerospace Systems Key technical leadership position that drives the development and adoption of advanced data science methods with artificial intelligence (AI) and machine learning (ML) for aerospace ground and flight test techniques and modeling and simulation (M&S) capabilities across North Wind. Experienced in the creation and application of neural networks for surrogate models and other ML approaches for aerospace domain problems. Practitioner of computational fluid dynamics (CFD) and / or finite element analysis (FEA) codes. Skilled communicator who can operate as an individual contributor and a leader while supporting engineers to learn new AI/ML methods. Responsibilities: Development of AI/ML Tools for Aerospace Projects: Leads technical efforts to apply machine learning, artificial intelligence, and advanced data science methods to develop new ground and flight test techniques and M&S capabilities and workflows, with specific application for a new wind tunnel facility complex. Performs CFD and / or FEA and develops scalable model training processes and algorithms to build fast-running surrogate models of complex physical processes. Supports the development and implementation of AI/ML for test facility digital twins and integration of M&S workflows for multi-discipline design, analysis, and optimization and uncertainty quantification. Supports integration of wind tunnel facility data collection and use of AI for predictive maintenance. Advanced Data Science Strategy: Force multiplier who leads North Wind’s ML adoption, including helping engineering leadership select and integrate new tools and processes leveraging advanced data science methods. Strategically recommends projects across North Wind where AI and ML will strengthen technical execution. Creates and leads training sessions with engineering staff to support AI/ML up-skilling. Builds a cadre of ML practitioners across North Wind. Recommends high performance computing hardware architectures to support North Wind AI/ML vision and strategy. Engages in technical forums, conferences, and working groups, with specific focus on ML applied to high-speed aerospace systems. Team Management & Collaboration: Creates and leads highly functioning teams to develop AI/ML solutions and products. Effectively communicates the value proposition of advanced data science methods to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 7-10 years of experience in engineering projects pertinent to the responsibilities listed above, • Strong knowledge of AI/ML tools, model training software, and technologies, • Skilled in building data pipelines and ML models using modern software libraries, including applications for deep learning and Bayesian modeling, • Proficient in aerospace industry standard CFD and / or FEA codes and tools, • Experienced in uncertainty quantification in the aerospace domain, • Deep understanding of engineering principles, including mechanical, electromechanical, and aerospace systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Demonstrated leadership of cross-functional teams from project conception to completion; guiding teams through planning, execution, and delivery phases, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools, • Active U.S. security clearance strongly preferred; candidates must be U.S. citizens and eligible to obtain and maintain a clearance Additional Preferred Qualifications: • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs—from R&D to flight testing. If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. The Lead Engineer – Digital Integrated Systems is a key technical leadership position that reports to the Office of the Chief Engineer and drives the technical execution of the company’s digital engineering (DE) vision for current and future projects. Experienced in architecting, designing, and integrating digital engineering hardware and software platforms for multi-domain, complex systems. A practitioner of digital engineering tools and model-based approaches who will help guide the company’s digital transformation. Skilled communicator who can operate as an individual contributor and a leader while distilling the value proposition of digital engineering and building company-wide interest in adoption of new digitally integrated approaches and processes. Responsibilities: Digital Engineering Platform Development: Leads the architecture development, design, build, integration, and deployment of a digital engineering hardware and software platform for a new wind tunnel facility complex. Develops digital engineering technology solutions that evolve with the project, are scalable to new applications, and are aligned with government architectures and frameworks. Engages the team to develop the critical DE data flows and workflows that streamline test conduct and improve test utility for aerospace system developers. Leads the development and implementation of DE platform tools, including digital twins, use of machine learning (ML) and artificial intelligence (AI) for improved design processes and test techniques, and integration of modeling and simulation (M&S) workflows for multi-domain design, analysis, and optimization. Digital Transformation: Guides the company’s digital modernization, including helping engineering leadership select and integrate new DE software tools and processes. Engages engineering workforce to support selection and adoption of new DE-related tools and workflows. Creates and leads training sessions with engineering staff to support DE upskilling. Team Management & Collaboration: Creates and leads highly functioning teams to develop digital engineering solutions and products. Effectively communicates the value proposition of digital engineering to grow team-wide understanding and interest. Fosters a collaborative and inclusive work environment that encourages innovation, accountability, and professional growth. Technical Expertise: Experience in architecting, designing and integrating a digital engineering hardware and software platform for a multi-domain, physical system / product. Practitioner of product lifecycle management tools, model-based systems engineering, and creating digital threads between software tools to integrate complex workflows and system development. Cross-functional Support: Partners with Division and Functional leadership to ensure alignment and seamless integration of digital initiatives. Performance Monitoring & Optimization: Tracks and analyzes digital performance metrics, providing insights and recommendations for improvement. Preferred Education / Experience: • Advanced degree in Mechanical Engineering, Aerospace Engineering, or a related discipline, • Minimum 10 years of experience in engineering projects pertinent to the responsibilities listed above, • Strong knowledge of digital engineering tools and technologies, including model-based systems engineering (MBSE), product lifecycle management (PLM) tools, digital twins, digital threads, and cloud-based platforms, • Demonstrated success driving the technical execution of digital engineering platforms and initiatives, • Deep understanding of engineering principles, including mechanical, electromechanical, and aeronautical systems design, test, and evaluation, • Proficiency in interpreting engineering plans, technical drawings, and specifications, • Ability to define complex problems, analyze data, interpret abstract concepts, and develop effective solutions, • Skilled in project management, prioritization, budgeting, and delivering results on time, • Familiarity with Department of Defense (DoD) acquisition processes, R&D funding, and technology development programs, • Excellent written and verbal communication skills, with the ability to tailor messaging to technical and non-technical audiences, • Proficient in Microsoft Office and engineering-related software tools., • Experience with aerospace test systems and / or vehicle development programs, • Background in early-stage research and development, product development methodologies, and innovation strategy

Job Description ELECTRICAL ENGINEER BBS Architects, Landscape Architects & Engineers, P.C. is a NY-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural, Civil and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. BBS is a multi-disciplined firm with a wide range of consulting services located in-house, successfully delivering building and site projects for clients predominantly with K-12 / Higher Educational and Municipal backgrounds for over 40 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term, and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity and camaraderie. WHO ARE WE LOOKING FOR? We are seeking Electrical Engineers in our Patchogue, NY office, with a minimum of 3-5 years of experience to participate in and be responsible for the design, production, and planning aspects for projects of varying types, complexities, scopes and budgets. Previous public-sector experience is preferred. Candidates should be dedicated self-starters able to work independently when necessary and also have experience working on teams with other professionals, including senior and project level architects and engineers, project managers, and technical designers. He or she should also have a dedication to the profession with a strong, self-motivated desire to learn and progress. DUTIES AND RESPONSIBILITIES: • Supports the project team with providing technical expertise and sound solutions, • Assess, understand and design systems, i.e. building power, lighting, low-voltage systems and photovoltaic projects, • Efficiently and effectively deliver a set of documents for construction, • Capable of working with other disciplines, • Meets deadlines as necessary to ensure highest level of client satisfaction, • Continue to grow our respected, long-term client relationships and BBS team relationships SKILLS AND EXPERIENCE: • Bachelor of Science in Electrical Engineering or Electronics Engineering Technology, • Minimum 3-5 years of Electrical Engineering experience in an office environment., • Understands and contributes to the process and workflow of an A/E project design team, works within established cost budgets and timelines., • Excellent verbal, written and visual communication skills. Self-driven desire to learn and grow professionally, ability to multi-task and to meet multiple simultaneous deadlines, and presentations., • Proficiency in AutoCAD, MS Office, or other presentation/editing software packages. Revit experience a plus. BENEFITS INCLUDE: • Comprehensive, competitive compensation package., • Group health insurance, dental insurance, and vision insurance plans, • Health and Dependent Care Flexible Spending Accounts (FSA), • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k plan., • Company-paid holidays, vacation and sick/personal time. BBS is an Equal Opportunity Employer. All qualified applicants are encouraged to apply and will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality or sex.

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting the research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree or higher in Mechanical Engineering, • One internship or limited experience in a manufacturing environment, • Familiarity with manufacturing processes and mechanical components, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Demonstrated working knowledge of SolidWorks or similar software, • Proficient in Microsoft Office Suite, • Experience in electro-mechanical design, • Minimum 2 years of mechanical design experience, • Experience working with ERP systems, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required.On a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $160,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job DescriptionSenior Electrical Engineer – Analog & Digital Circuit Design | Power Electronics Expert We are seeking an experienced Senior Electrical Engineer with deep expertise in analog and digital circuit design and power electronics to join our engineering team. This role offers the opportunity to provide technical leadership across the complete product lifecycle—from initial requirements and architecture through production and sustainment—while working on cutting-edge harsh-environment applications. If you're passionate about innovative hardware design and thrive in a collaborative, technically challenging environment, this position is for you. Key Responsibilities • Lead technical initiatives throughout the full product lifecycle, including requirements definition, architecture development, design qualification, production support, and long-term sustainment, • Design, analyze, simulate, and verify innovative analog and digital hardware circuits for demanding harsh-environment applications, • Develop comprehensive design documentation, technical requirements, and deliver presentations at critical design reviews, • Balance and optimize complex engineering tradeoffs involving performance specifications, cost constraints, project schedules, and risk management, • Provide hands-on troubleshooting, technical analysis, and engineering support for manufacturing operations, supplier relationships, and legacy product lines, • Mentor junior and mid-level engineers, contribute to business development proposals, prepare cost estimates, and participate in technical hiring decisionsRequired Qualifications, • Bachelor's degree in Electrical Engineering (Master's degree strongly preferred), • Minimum 7-10 years of professional experience in analog circuit design and digital circuit design, including expertise in A/D conversion, processors, microcontrollers, I/O interfaces, and communication systems, • Proven background in power electronics design using MOSFET, IGBT, SiC, and GaN semiconductor devices, • Hands-on experience with DC/DC converters and regulatory compliance including MIL-STD-1275, MIL-STD-704, DO-160, and MIL-STD-461, • Advanced knowledge of critical engineering analyses: thermal analysis, electrical stress analysis, worst-case circuit analysis, tolerance analysis, aging analysis, FMEA, EMI/EMC, and radiation effects (SEU, TID), • Demonstrated proficiency in printed wiring board (PWB) layout for high-power, high-voltage, and EMI-compliant circuit designs, • Strong understanding of communication protocols including CAN bus, RS-232/422/485, SPI, JTAG, PCI/PCIe, and 1G/10G Ethernet, • Experience with motor control systems, control theory, Z-domain analysis, Clark and Park transforms, and sensor interfaces (LVDT, resolvers, encoders), • Join a well-established, stable company with a proven track record of success and innovation, • Work on a diverse product portfolio serving multiple industries and customers across various sectors, • Engage with advanced technologies and tackle challenging engineering problems in harsh-environment applications, • Collaborate within a supportive, professional work environment that values technical excellence and continuous improvement, • Receive a comprehensive benefits package designed to support your health, financial security, and work-life balance

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical and/or Computer Engineering, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Demonstrated ability to write firmware for industrial control equipment, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Software Engineer with strong expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in designing, building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. This is a hands-on position, we want someone who is focused, and passionate about coding, and development. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Design & Development: Architect and implement robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular and ExtJS., • Code Quality: Write clean, maintainable, and well-documented code following the industry’s best practices. Perform code reviews and mentor junior developers to ensure coding standards are met., • End-to-End Ownership: Manage the full software development lifecycle, from gathering requirements to deployment and ongoing maintenance., • Collaboration: Work collaboratively with cross-functional teams including product managers, designers, QA engineers, and other developers to deliver high-quality features on time., • Performance Optimization: Focus on optimizing the performance of both front-end and back-end components, ensuring the application scales effectively and provides an excellent user experience., • Testing & Quality Assurance: Implement unit tests, integration tests, and other automated tests to ensure the reliability and stability of the application., • Troubleshooting & Debugging: Investigate production issues, resolve defects, and implement preventative measures for future releases., • Backend: Expertise in .NET Core (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Frontend: Strong proficiency with Angular, HTML5, CSS3, and TypeScript., • APIs: Experience designing and implementing RESTful APIs and working with OAuth and JWT authentication., • Cloud: Experience with AWS cloud platform., • ML/AI: Experience with LLM integration, NLP, training and utilization of ML models., • Version Control: Proficient in Git for version control., • Enterprise Architecture: Highly proficient with 5+ years of experience building scalable enterprise-grade systems with a focus on performance, maintainability, and extensibility. Solid understanding of object-oriented design and software engineering principles., • Web Application: Solid experience in data driven web applications using Angular, other JavaScript frameworks., • Agile Methodology: Proven experience working in Agile or Scrum development environments., • Containerization: Experience with Docker, Kubernetes, or other containerization technologies., • DevOps: Knowledge of DevOps practices and tools (CI/CD pipelines, infrastructure as code)., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members., • Self-driven with a focus on delivering high-quality results on time., • Ability to handle multiple priorities and navigate complex technical challenges. Compensation range for this opportunity is currently $110k - $120k DOE Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Job DescriptionSalary: $70-95K DOE Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uPs and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location New York (Long Island)

Job Description About CAMP Systems: At CAMP Systems, we are the trusted leader in aircraft compliance and health management, proudly serving the global business aviation industry. With over 20,000 aircraft and 33,000 engines supported on our cutting-edge platforms, and partnerships with more than 1,300 maintenance facilities and parts suppliers worldwide, we’re shaping the future of aviation technology. Since our founding in 1968, we’ve grown to a dynamic team of 1,600+ employees across 14 locations globally—all united by a passion for innovation and excellence. Our Mission & Vision: We connect the aviation industry through smart technology to make flight safer and more efficient, driving the future of aviation with intelligence and exceptional customer experiences. Our Values & Excellence Mindset: We are customer obsessed, trust-driven, owners of our work, stronger together, constantly curious, and boldly innovative. What You Will Experience in This Role: We are seeking a full stack Associate Software Engineer with expertise in .NET and Angular to join our talented engineering team. Working part of an Agile Scrum team, you will play a key role in building, scaling, and maintaining enterprise-grade web applications that serve a diverse range of customers. You will work closely with product managers, designers, and other developers to create seamless, performant, and highly scalable solutions. We expect all our team members to contribute towards building a culture of continuous learning and improvement. We are open to new approaches and ideas. CAMP offers a unique domain, as well as a chance to be part of a product that affects the readiness, safety, and performance of business aircraft from nearly every major manufacturer. Like many of our team, if you are selected, with hard work, a continued quest for knowledge, and a knack for troubleshooting, there are endless possibilities for growth and development. Responsibilities: • Implement, enhance and maintain robust, scalable, and high-performance web applications using .NET (Core, ASP.Net, Web API) and Angular & ExtJS., • Build and integrate front-end and back-end components, ensuring performance, responsiveness, and security., • Utilize state-of-the-art AI coding tools, LLMs, and frameworks to accelerate software development, automate testing, and improve code quality., • Collaborate with cross-functional teams including product managers, designers, QA, and DevOps., • Participate in code reviews and contribute to maintaining high standards of code quality and best practices., • Assist in troubleshooting and debugging issues in production and lower environments., • Write unit and integration tests to ensure code quality and reliability., • Experience in .NET (C#), ASP.NET MVC, Web API, NHibernate, and Oracle (or equivalent relational database systems)., • Proficiency with Angular, JavaScript, HTML5, CSS3, and TypeScript., • Experience in implementing and integrating with REST APIs., • Experience in building and maintaining enterprise-grade data-driven web applications using .NET, Angular, other JavaScript frameworks., • Understanding of object-oriented design and software engineering principles., • Experience working in Agile or Scrum development environments., • Education: Bachelor’s degree in computer science, Information Technology, or a related field., • Strong problem-solving skills and the ability to think critically and creatively., • Excellent communication skills, both written and verbal, with the ability to collaborate effectively with technical and non-technical team members. Salary Range: $80,000 - $90,000 DOE (Depending on experience) Why Work at CAMP? Join a culture where your ideas matter, your impact is real, and your growth is supported. Be part of a team reimagining the future of aviation. CAMP is committed to creating a diverse environment and is proud to be an affirmative action and equal opportunity employer – vets/disabled CAMP is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, please contact . All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability or protected veteran status EEO.

Looking for a lifetime career? Apply today! Job Description The Knolls Laboratory Weight Handling Engineering unit is seeking a Mechanical Engineer to join our Team! This role provides engineering support for maintenance and inspection of cranes, rigging equipment, and other weight handling equipmen

Manufacturing Engineer Location: Bohemia, NY Job ID: #72316 Pay Range: $67-80 Duration: 6-12 months contract Job Description: * Define and solve technical problems in manufacturing, assembly, and testing environments. Collaborate with design engineering teams to enhance manufacturability of products

As an associate engineer, you will be responsible for your own cognizant components, systems and area but will be supported by a team including more experienced engineers and advisors. Specific responsibilities may include: analysis and interface with vendors on product design and acceptability, des

Experience working in Agile development environments. A creative problem-solver with a strong engineering mindset. Go Developer (Software Engineer)*.

If you’re ready to shape the future of naval technology in a collaborative and supportive environment, we want to hear from you! Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Computer Science, Computer Engineering, or Electrical Engineerin

Job Title: Senior Specialist, Electrical Engineer (RF Design). As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, assembly, SMT and test related. Working with design engineering and manufacturing teams to introduce new

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Computer Science, Computer Engineering, Mechanical Engineering, Aerospace. Bachelor's degree in electrical engineering. Associate, Integration & Test Engineer.

Collaborate with design engineering teams to enhance manufacturability of products.

Computer Science, Computer Engineering, Mechanical Engineering, Aerospace. Support development of test plans, test procedures, requirements traceability, test reports, test flow, and test case design and implementation. Bachelor‘s degree in electrical engineering.

Join a global team of 35 000 engineers, software developers, and cyber experts who turn complex challenges into reliable, next generation systems that keep warfighters ahead of emerging threats. Our RMS business in Syracuse, NY is a hub of talented engineers, scientists, and professionals committed

During formal acceptance testing, the engineer will be responsible for hands-on engineering support of the system, including troubleshooting and live target data analysis. The engineer will be leading and providing advanced technical contributions to the following: developing and documenting Integra

Bachelor’s degree in Electrical Engineering, Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field. Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Review and maintai

A Production Test Engineer I is an essential part of our production and engineering teams. You work closely with engineering and production personnel, utilizing your advanced knowledge of electronic measuring equipment and testing methodologies to perform bench level and automated testing, including

Process Engineer Job Duties: Oversees and assesses existing processes and workflows.

Our client is seeking a direct hire Mechanical Engineer to serve as an Owner’s Engineer supporting mission-critical data center developments in Upstate New York. Commissioning and Turnover SupportAssist in development of commissioning plans and functional test procedures. Support documentation dev

Mechanical Engineer Job Duties: Designs mechanical and electromechanical products and systems by developing and testing specifications and methods. Provides engineering information by answering questions and

Either a BS/MS in mechanical/chemical engineering (or related field), a track record of transitioning prototypes to manufacturing and scaling up production. We’re looking for a Hardware Manufacturing Engineer to support the design and scale-up of our foam spray system. You’ll work closely with o

Collaborate with design engineering teams to enhance manufacturability of products. Bachelor’s degree in industrial, Manufacturing Engineering.

Partner with engineering and operations teams to ensure smooth transition from development into production. Bachelor’s degree in Engineering or related discipline. Manufacturing or Industrial Engineering.