Trabajos development engineer en Wayne, New JerseyCrear alertas

If you enjoy variety, we will put your time-management and organization skills to use handling field visits, office work, and projects for large commercial clients. We will provide you with extensive training to understand our business, build relationships with mentors, and learn FM's best-in-class industry standards. In this role, you will work independently with a lifeline of 200 years of support and experience. Initially, your assignments are structured for you to learn. You will gradually begin assessing risks at larger commercial properties. You will visit client facilities and perform evaluations that will help our clients reduce risks in their business and at their properties. You will perform “hands-on” site assessments of physical properties including roofs and conduct evaluations which include, but are not limited to, site water supplies, dust hazards, chemical storage, and rack storage arrangements of client products. Consultant Engineers are encouraged to follow FM Engineering Standards and communicate recommendations and/or engineering solutions to ensure client understanding. Strong communication, listening and relationship building skills are a must. You should be willing to operate from a home office and will travel to clients' facilities daily; overnight travel is expected approximately 30% of the time. You must also be willing to travel to Natural Catastrophe sites as needed. Based on a candidate’s previous experience, this role can be for either a Consultant Engineer I or Consultant Engineer II. Successful Consultant Engineer candidates have the following qualifications: * Bachelor's degree in engineering or fire protection * Strong verbal and written communications skills * Good analytical, organizational, problem solving skills * Efficient time management ability with work independently * Proven technical capability including diverse knowledge of engineering principles * Valid driver’s license * Physical ability to climb commercial ladders (ex. inspect roofs), lift >25 lbs., and some clients require working in confined spaces. * Proficient in MS Office products You will be expected to work independently and should be willing to operate from your home office and travel to client sites on a regular basis. The position is eligible to participate in FM’s comprehensive Total Rewards program that includes an incentive plan, generous health and well-being programs, a 401(k) and pension plan, career development opportunities, tuition reimbursement, flexible work, time off allowances and much more. FM is an Equal Opportunity Employer and is committed to attracting, developing and retaining a diverse workforce.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager, you will lead and oversee transportation engineering projects, ensuring their successful execution and delivery to clients. Responsibilities: • Manage and supervise transportation engineering projects, including highway design, traffic engineering, roadway improvements, transportation planning, and airport design. Serve as the primary point of contact for clients, maintaining effective communication and building strong relationships., • Provide technical expertise and quality reviews in the areas of highway design, and protection of traffic, transportation planning, and/or any combination thereof., • Report on project staffing needs, including, but not limited to, recruitment, development, retention, and succession of project staff., • Monitor project progress, identify risks and issues, and implement appropriate mitigation strategies., • Prepare project budgets, schedules and specifications for labor and materials., • Conduct regular project meetings, providing updates to stakeholders and ensuring alignment with project objectives., • Prepare and review project deliverables, including reports, design plans, specifications, and cost estimates., • Manage project budgets and finances, including tracking expenses, approving invoices, and ensuring cost control measures are in place., • Support and participate in the development and mentorship of staff., • Stay informed about industry trends, emerging technologies, and best practices in transportation engineering.Qualifications:, • Bachelor's degree in civil engineering or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years minimum transportation design experience. Highway/roadway design experience a plus, • Design Build project experience a plus., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient in Microsoft Office Suite, • Ability to lead a project and supervise technical staff., • Good client relationship development sills.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR 1c8D0x6vGr

Job DescriptionPLC Mechanical Automation Engineer PLC Mechanical Automation Engineer Position Overview We are seeking a skilled PLC Mechanical Automation Engineer to design, develop, and implement automation solutions that enhance production efficiency and reliability. The ideal candidate will have a strong background in HMI design and experience with various automation systems, ensuring seamless integration of mechanical and electrical components. Key Responsibilities • Design and develop HMI interfaces for automation systems, • Collaborate with cross-functional teams to integrate mechanical and electrical systems, • Troubleshoot and resolve issues in automation systems and processes, • Implement control systems and robotics solutions to improve operational efficiency, • Conduct testing and validation of automation solutions to ensure functionality and performance, • Provide technical support and training to end-users on automation systems, • Document project specifications, design changes, and maintenance proceduresQualifications, • Bachelor's degree in Mechanical Engineering, Automation Engineering, Electrical Engineering, or a related field, • Proven experience in HMI design and development, • Knowledge of automation systems and control systems, • Familiarity with robotics and electrical engineering concepts, • Strong troubleshooting skills and experience with SCADA systems, • Understanding of industrial engineering principles and process control, • Excellent communication and teamwork skills Medical, Dental and Vision 401 (k) with company match Holiday, Vacation and Sick Time Tuition Reimbursement Health Savings Accounts (HAS) Flexible Spending Accounts (FSA) Cigna Wellness Incentive Program Employee Assistance Program (EAP) Short Term Disability Group Life and Accidental Insurance Sun Life - Accident, Critical Illness, and Hospital Indemnity Insurance Smoking Cessation Program Pet Insurance • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 10/14/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description VMC Group is seeking a versatile and detail-oriented Quality Control Auditor to support both field and in-house quality functions. This role is responsible for conducting audits, managing quality documentation, inspecting products and installations, and ensuring compliance with ISO standards. The ideal candidate will be experienced in manufacturing environments, field inspections, and quality systems management. Responsibilities not limited to: 1. Inspection & Auditing • Perform on-site inspections of manufacturing processes, products, and field installations (in-house and customer locations)., • Conduct ISO 9001 internal audits as directed by the Manufacturing Engineer., • Conduct dimensional checks on in-process products using inspection tools., • Identify and document quality issues, non-conformances, and initiate rework procedures., • Ensure compliance with building codes, engineering drawings, and manufacturing standards. 2. Quality Records Management • Maintain and organize Certificates of Conformance (C of C) for critical incoming materials such as steel and rubber., • Manage calibration records to ensure all required equipment is current and accurate., • Process and control RMA (Return Material Authorization) materials., • Document all inspections, audits, and non-conformance reports in compliance with ISO standards. 3. Training • Deliver Quality System training for new employees (shop floor and office staff)., • Translate work instructions and training documents into Spanish as needed. 4. Additional Duties • Serve as back-up to the Shipping Clerk when required., • Support internal and external quality improvement initiatives. Requirements • High School diploma required; technical certification or equivalent experience preferred., • Proven experience in ISO 9001:2008/2015 environments., • Background in building inspection and manufacturing required., • Bilingual (English/Spanish) preferred., • Completion of an ISO internal auditor course., • Ability to read and interpret technical drawings and blueprints., • Proficient in using calipers, height gauges, thread gauges, and other inspection tools., • Knowledge of calibration procedures and systems., • Strong attention to detail, organizational, and communication skills., • Ability to lift to 25 pounds., • Able to sit or stand for extended periods while using a computer or performing inspections., • Ability to work additional hours as needed., • Combination of office, manufacturing floor, and field environments. At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

A company is looking for a Software Engineer, Proactive Security.Key Responsibilities Build and maintain core security products such as Remote Access Management and Access Control Collaborate with cross-functional teams to embed secure design practices into development processes Lead the technic

Key Responsibilities Support sales and business development by providing technical expertise during client engagements, demos, and presentations Design and articulate solution architectures demonstrating the platform's AI-driven capabilities and business ROI Collaborate with product and engineer

Job Summary The Development Engineer leads or participates on teams responsible for the design and development of surgical implants and instruments from concept through launch. The focus of these development projects has a heavy emphasis on the individualized treatment of patients on behalf of a requesting surgeon. The role also encompasses implementation of improvements and value engineering to existing patient specific product offerings and services, support of the development of the quality system and other company initiatives. Responsibilities • Adhere to Onkos Core Beliefs, Code of Business Conduct, all regulatory requirements and quality standards., • Support company advocacy initiatives to help raise awareness of sarcoma and pediatric cancer and drive positive change that will impact the lives of cancer patients., • Prepare and manage to comprehensive project plans, resource requirements, project budgets, timelines, etc., • Interface with sales force, surgeons, and other stakeholders to understand customer needs in order to define design inputs, draft product performance requirements, and draft surgical techniques., • Utilize CAD software to model designs and detail engineering drawings, optimizing designs for quality, manufacturability, inspectability, and cost., • Facilitate manufacture of prototypes and test articles., • Develop and execute product test plans ranging from early bench testing/prototype evaluation to final validation and verification., • Partner with regulatory team to fulfill all requirements for regulatory submissions and reports., • Generate design controls, risk management documentation, and other technical memos, conducting root cause and engineering analyses as necessary., • Support quality, regulatory, and marketing initiatives that require engineering assistance, analyses and quantitative assessments of markets and products., • Assist in developing innovative manufacturing and processing techniques and/or seek out new technologies for materials and processing through 3rd party relationships., • Consult with surgeons and sales force to identify potential solutions for difficult patient cases. Requirements • Passion to find solutions to our patients’ unmet clinical needs and to advocate for their cause., • Bachelor’s degree in engineering or life sciences discipline. Mechanical or Biomedical Engineering preferred., • 3+ years of product development experience in the medical device field, preferably related to orthopedics. Experience working with surgeons on product design a strong plus., • Ability to apply engineering principles to solve problems and develop new products and techniques., • Demonstrated ability with CAD software. SOLIDWORKS and NX preferred., • Must be self-motivated, able to work independently, and thrive in a fast-paced dynamic environment., • Strong attention to detail, interpersonal skills, and oral and written communication skills., • Must be willing to attend and participate in cadaveric product evaluations and attend surgery for observation and/or technical support., • Travel: Up to 5% About Onkos At Onkos Surgical, we believe individuals with cancer requiring surgery deserve solutions designed specifically for them. These individuals, their caregivers and their support network deserve an organization passionately championing their cause. At Onkos Surgical, we exist to maintain a singular focus on surgical oncology by looking at everything we do through the lens of the cancer surgeon and their patients. At Onkos Surgical, we will: • Find solutions to our patients’ unmet clinical needs and advocate for their cause., • Partner with surgical oncologists through research, education and innovation, to treat their patients more effectively and more efficiently., • Collaborate with regulatory agencies to find pathways to provide timely solutions while upholding the highest standards of quality or compliance., • Fulfill our employees’ desire to make a difference in the lives of the patients they serve while achieving their own professional growth., • Deliver value to our customers and shareholders.

Every great civil engineering role should combine technical mastery, project management leadership, and meaningful client engagement — and this opportunity delivers exactly that. This Senior Site/Civil Project Engineer position is ideal for a PE-licensed Civil Engineer who thrives on managing the full project lifecycle. You’ll oversee land development projects across residential, commercial, institutional, and mixed-use markets — guiding everything from concept to construction. We promise a dynamic, respected environment where your project management skills will shine. You’ll lead multidisciplinary teams, coordinate permitting, and ensure deadlines and budgets align seamlessly. You’ll also collaborate with firm leadership on proposals, client strategy, and mentoring — combining delivery with development. What You’ll Do: • Lead land development and site/civil design projects across New York., • Manage grading, drainage, stormwater management, and permitting., • Deliver hydrologic/hydraulic analyses and SWPPPs., • Coordinate geotechnical and environmental design inputs., • Mentor junior engineers and support client growth strategies. If you have 10+ years of site/civil engineering experience and a proven record in project management, this is your chance to shape high-profile projects and your own career trajectory. 👉 Apply today and take the lead in building what’s next.

My client is looking for a Senior R&D Project Manager to work onsite in their Parsippany NJ office. This is an exciting role who will be responsible for the successful execution of product development projects. You will plan, coordinate and lead the execution of activities to ensure that the goals and objectives of the project are accomplished within the prescribed timeframe and funding parameters. This is a technical position and the candidate must have an engineering background in order to manage and contribute to the development of new products. The projects that will be managed include a mix of new product development, product line extensions, and sustaining engineering releases. Essential Functions • Must have the ability to implement multiple projects simultaneously outside technical area of expertise., • Ability to balance electrical, mechanical, and software development issues at the system level, • Lead the execution of assigned product development programs in accordance with established processes and procedures., • Lead and motivate cross-functional team performance toward the goal of completing projects according to the defined objectives., • Develop detailed project work plans and schedules., • Manage product requirements and traceability., • Lead design review and risk management activities., • Manage technical partners/ vendors supporting product development activities., • Effectively utilize problem solving skills and techniques to identify potential issues, assess their impact, and develop and implement mitigation and resolution plans and activities., • Employ excellent interpersonal, communication and negotiation skills with all levels of personnel and management., • Prepare and/or manage the preparation of all required project documentation., • Facilitate and coordinate project team meetings and management presentations as required. Required/Preferred Education and Experience • BS degree in Engineering required., • Advanced degree preferred., • 5+ years managing technical product development., • Experience with medical device capital equipment development., • 10+ years of experience as an engineer developing products, preferably in the medical device industry., • Knowledge of global standards and regulations for Design Controls, Risk Management, and Electrical Safety for Medical Devices., • Demonstrated aptitude for successfully managing multiple projects, of varying complexity, within the specified guidelines, timeframes and budgets., • Demonstrated understanding of electrical, mechanical, and software engineering practices at the system level., • Experience with Scrum and Agile processes.

A company is looking for a Software Engineer / Senior Software Engineer (C#.Key Responsibilities Contribute to the design, development, and delivery of high-quality software across the full stack Author maintainable code aligned with internal standards and engage in code and design reviews Devel

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients, many of whom have partnered with us for decades. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn back-to-back Best Places to Work in NJ awards and driven strong employee retention. Position Overview Due to expansion, we are seeking a Group Manager for our Municipal team to lead and oversee the planning, design, and execution of municipal infrastructure projects. This leadership role requires deep technical expertise, strong project management skills, and a commitment to ensuring all projects meet the latest industry codes, standards, and regulatory requirements. Core Responsibilities Strategic & Business Leadership -Define and execute annual and long-term business plans for the Municipal Engineering Group, fully aligned with CP Engineers’ company-wide vision. -Establish, monitor, and exceed group-level KPIs covering revenue growth, financial utilization, labor multiplier, and client retention. -Run the group as a business, including forecasting, resource planning, and identifying new opportunities for growth. -Lead efforts to hire, onboard, and develop high-performers (including Project Managers, Market Managers, and key engineers). Financial & Operational Performance -Own the group’s financial health: oversee revenue, profitability, budget stewardship, and capital planning. -Optimize use of project management and financial tools (e.g., Ajera) to actively monitor and improve key metrics. Group Manager – Municipal Engineering -Ensure streamlined billing cycles, efficient management of work-in-progress (WIP), and strong receivables performance. -Help set and guide pricing, proposal, and contract strategies. Organizational Change & Team Culture -Promote and lead major organizational changes that strengthen how the Municipal Engineering Group functions. -Champion continuous improvement, adoption of new technologies, and consistent implementation of best practices. -Foster a collaborative, accountable, and high-performance environment—ensuring team engagement and alignment with organizational goals. Client Development & Brand Stewardship -Build durable client relationships focused on satisfaction, sustainability, and repeat engagements. -Represent CP Engineers at high-level meetings, public forums, and industry events, further strengthening the firm’s market position. -Oversee client transitions, relationship continuity, and quality project delivery. -Direct and refine group marketing and pursuit efforts, making full use of CRM and analytics for smarter business development. Talent Management & Staff Development -Recruit, coach, and mentor a civil engineering team to assure both professional growth and delivery excellence. -Conduct regular staff reviews and collaborate on individualized development plans that support company objectives. -Drive accountability for individual and group KPIs and ensure compliance with all personnel policies and procedures. Project Oversight & Quality Control -Project Oversight: Lead the planning, design, and execution of municipal projects—including roads, stormwater management, and public infrastructure—ensuring compliance with all applicable codes and standards. -Regulatory Compliance: Ensure all projects adhere to local, state, and federal regulations, including permitting and municipal stormwater management rules. -Technical Leadership: Provide technical guidance and mentorship to engineering staff, promoting the application of best practices and compliance with industry standards. -Client Representation: Serve as the primary point of contact for municipal clients, representing municipalities as a municipal or board engineer at public meetings and providing expert advice on engineering and compliance matters -Provide senior oversight across all group projects, ensuring delivery meets standards for quality, budget, and timeliness. -Standardize project management practices in alignment with established company controls and policies. -Implement robust QA/QC procedures and actively support risk management and continuous learning within the team. Key Performance Indicators (KPIs) (Examples based on 2025 business objectives) -Group Revenue, Revenue Growth, and Labor Revenue Multiplier -Gross and Financial Utilization -Billing Variance (<2.25%) -WIP (<30 Days) and Uncollected A/R (<60 Days) -Client Retention and Satisfaction Metrics -High-Impact Hires Completed and Retained -Execution of Organizational Change Initiatives -Compliance with Internal Project Controls Why CP Engineers? CP Engineers offers the chance to lead, innovate, and grow a team as your own business within a collaborative and fast-growing firm. If you are energized by leadership, value building high-performing teams, and want to drive real impact in municipal engineering, we invite you to apply and shape the future with us. Apply Today. Be the growth catalyst for CP Engineers’ Municipal Engineering Group. Salary range: $140,000.00-190,000.00 Requirements • Bachelor’s degree in Civil or Environmental Engineering required; Master’s or business credential preferred., • Professional Engineer (PE) license highly preferred., • Minimum 15 years of progressive experience in Civil and/or Municipal engineering, with substantial leadership and management responsibilities., • Demonstrated success in building and leading high-performing teams, driving business unit success, and consistently surpassing financial and strategic goals within dynamic, growth-oriented environments., • Proven track record of managing medium-to-large complex projects., • Competencies, • Strong business and financial acumen, • Proactive, entrepreneurial mindset, • Advanced leadership, talent development, and organizational change skills, • Highly effective communication, negotiation, and relationship-building abilities, • Hybrid/remote work options, • Flexible hours, • 401(k) with 4% company match, • 20 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Plans, coordinates, and institutes functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into the Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Solves complex problems and calculations, using engineering formulas and skills, • Evaluates research by others and writes reports, • Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project, • Assists the Project Engineer in scheduling staffing requirements for field projects, • Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Participates in the integration of technical activities, • Evaluates and presents changes for design, specifications, drawing releases, reports, etc to the Project Engineer and /or Project manager for approval, • Prepares interim and completion project reports, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Performs site inspection to monitor progress/conformance to specs and procedures, • Designs portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • Plans schedule of research according to company’s or contracting organization’s timetable and establishes daily or weekly routines necessary to meet project timetable, • Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project, • Supervises field work and performs field work when needed, • Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel, • Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority, • Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget, • Supervises and delegates assignments to staff, • Oversees staff’s daily activities to ensure it is correct and complete, • Reviews status reports prepared by project personnel and modifies schedules or plans as required, • Prepares project reports for management, client, or others, • Confers with project personnel to provide technical advice and to resolve problems, • Coordinates project activities with activities of government regulatory or other governmental agencies, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in civil engineering with a minimum of 3-5 years of field or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred., • Professional Engineer (PE) license is preferred or have the ability to become licensed within 2 years of being in this position., • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE) preferred or have the ability to become licensed within 2 years of being in this position., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% up to 75% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Utility Engineer to join our team. As a Senior Utility Engineer, you will be responsible for supporting the planning, design, and preparation of contract documents for the construction of stormwater and utility infrastructure. Responsibilities: • Manage utility aspects of projects, oversee design and production of plans and specifications, and ensure that the work is produced on schedule profitably., • Collaborate with project teams to analyze utility relocation conflicts on infrastructure projects., • Review and provide feedback on Utility Owner design submittals., • Coordinate utility design efforts with consultants and stakeholders., • Perform constructability reviews to ensure compatibility with construction methods., • Analyze projects and direct ASCE SUE investigations., • Compile and compute a variety of engineering data., • Prepare plans, and details and develop engineering drawings, specifications, and other project deliverables., • Support and participate in the development and mentorship of staff. Qualifications: • Bachelor’s degree in civil engineering or related field., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • Must have a minimum of 5 years of experience in project engineering design., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • MS Office proficiency., • Experienced with ASCE standard governance of subsurface utility engineering., • Experience with different construction techniques and constructability of utilities and associated civil aspects in design-build projects., • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites., • Work productively and meet deadlines timely., • Ability to independently manage small to medium size projects.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 - $120,000 Powered by JazzHR hKcnA0Vo1S

Job DescriptionAbout our Company:Based in Denver, Colorado, Cologix is North America's leading network-neutral interconnection and hyperscale edge data center company. Our platform gives customers access to 45+ digital edge and ScalelogixSM hyperscale edge data centers in 12 markets across the United States and Canada along with a carrier-dense ecosystem of 710+ networks, 360+ cloud providers, 30+ onramps and seven Internet exchanges. We provide our nearly 2,000 customers with direct access to our local operations teams, resulting in strong partnerships enabled by exceptional operational support and unparalleled customer service. Backed by one of the largest North American infrastructure funds, Cologix's experienced leadership team, certified staff and commitment to ESG initiatives help form a culture that values our people, our environment and our clients. About the Position:The Senior Director, Engineering is primarily responsible for leading and managing the engineering efforts to support the Design and Construction Team in delivering innovative, high-quality, and efficient data center projects, especially related to future industry trends to ensure Cologix remains at the forefront of data center development. This role involves overseeing the technical aspects of all projects in design, ensuring alignment with company standards, client expectations, and industry best practices, as well as maintaining the company standards with an understanding it is a living document that continuously evolves to meet the future expectations of the market. What you do daily: • Provide expert technical engineering guidance for data center projects, ensuring compliance with building codes, safety regulations, and industry standards., • Serve as a primary point of contact for consulting engineers and direction, ensuring engineering designs align with Cologix’s best practices, customer expectations, contract requirements, project budgets, and operational requirements., • Regularly review and update all engineering basis of design documents to ensure designs meet the project schedule, budget and operational needs., • Conduct ongoing audits and enhancements of Cologix’s design and build standards to drive innovation in data center design, including liquid cooling, sustainability, and on-site generation alternatives., • Continually assess and update owner furnished equipment specifications for relevance to current and future designs, constructability, and coordination with all controls systems., • Interface with the supply chain group to ensure alignment with equipment designs, availability, and cost., • Work directly the internal Cologix DCIM, IT, and security teams to ensure alignment with all design standards and consulting engineering design documents., • Regular interface with the project construction and operations teams to continually assess design and equipment adequacy related to builds, constructability, schedule, cost, and maintenance., • Develop and implement company training plans related to the dissemination of key engineering elements that affect sales and operations, such as liquid to chip cooling processes, noise abatement approach to high decibel servers, etc., • Recruit, train, and provide technical leadership to internal engineering personnel. Assign tasks to align with staff abilities and project needs, fostering professional development and skill enhancement., • Oversee engineering group capital costs (hours and expenses) to align with annual budgets, manage personnel resources, and optimize overhead utilization while scaling the team to support project workloads., • Work with the development team to prepare consultant design budgets for new projects, and maintain existing consultant design budgets on projects in design., • Support the energy strategy group in technical discussions with utility companies when assessing existing and future utility service strategies and agreements., • Support the business strategy group in performing due diligence for prospective opportunities as well as developing scopes of work for third party consultants in performing due diligence where required., • Collaborate with internal and external teams to enhance processes and protocols, ensuring Cologix remains an industry leader in multi-tenant and hyperscale colocation data center design and construction., • Develop data-driven designs and equipment specifications to mitigate project risks through innovative planning and partnerships, presenting information to support executive decision-making., • Review project documents for quality and consistency throughout the design process, from conceptual design through IFC documents., • Conduct site walks as needed during construction to ensure designs meet specifications, and support RFI responses between design teams and internal management where required., • Work closely with the commissioning team to ensure vendors and contractors are aligned with the design documents in order to achieve successful project turnover to customers.What Makes You a Good Fit:, • Minimum of 15 years of experience in electrical and mechanical engineering, with at least 5 years in a leadership role within the data center or mission-critical industry., • Licensed Professional Engineer (PE) in a relevant discipline (e.g., Mechanical or Electrical) in a U.S. state is preferred but not required., • Bachelor’s degree in Engineering, Construction Management or a related field. A master’s degree in a related field is advantageous but not required., • Extensive experience in design-assist and design-build construction, particularly in data center projects, with a strong understanding of preconstruction planning, construction oversight, and commissioning processes., • Expertise to focus on MEP disciplines, as well as a working knowledge of low voltage BMS, EPMS, IT, security, and life safety systems. Knowledge of typical data center civil an structural disciplines a plus., • Understanding of utility service requirements, points of demarcation and responsibilities required. Knowledge of substation design, procurement, and construction a plus., • In depth knowledge of data center QAQC and commissioning processes., • Proven ability to lead and manage a team of engineers, fostering a collaborative and innovative environment., • Excellent communication, problem-solving, and organizational skills, with the ability to engage with corporate executives, external partners, and cross-functional teams., • Collaborative nature with the ability to be the decision maker when needed. Regularly source alternate opinions with the ability to assess the critical factors that best represent the company and stakeholder requirements., • Strong knowledge of building codes, safety regulations, and industry-specific standards., • Proficiency in engineering design software, construction management tools, cloud-based commissioning platforms, and financial management software.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. About the Role: SysEng HAVOCK (Hardware - Acceleration - Virtualization - Operating Systems - Containerization - Kernel) CoreWeave is seeking a highly skilled and motivated Senior Linux OS Automation Engineer to join our SysEng HAVOCK team. Reporting to the Engineering Manager for Systems Engineering, you will play a crucial part in the design, development, and optimization of our bare-metal systems from POST through joining a Kubernetes cluster. The team's primary responsibilities include maintaining custom Linux kernels, various OS images, the virtualization stack, and the container/pod runtime stack. You will collaborate closely with cross-functional teams, upstack engineering teams, and stakeholders to ensure the successful delivery of highly performant and reliable software solutions. Responsibilities: • Design, develop, and maintain automated tooling to reproducibly build, test, and release artifacts that support a variety of hardware platforms in complex environments, • Custom Linux kernels, • OS images, • cloud-init modules, • Define the artifact release-cycle roadmaps in coordination with the rest of the organization's business needs, • Leverage Kubernetes to automate the testing of OS images and cloud-init configurations, • Document the tested and supported OS images and cloud-init configurations, • Effectively communicate artifact releases to the rest of the organization, • Automate packaging of critical components (drivers, microcode, components with out-of-tree patches, etc), • Serve as a primary point-of-contact for boot-time issue escalation and troubleshooting, • Collaborate with cross-functional teams to define Linux and OS requirements, specifications, and system architecture, • 6+ years of professional experience maintaining large fleets of physical Linux systems, • Proficiency with Golang, Bash, and Python, • Experience with the following:, • Developing custom modules for cloud-init, • Github Actions or Gitlab Actions for CI/CD, • Building the Linux kernel/complex C compilation toolchains, • Packaging software into docker containers, • Experience with Debian package management, • Deploying containerized software using Kubernetes, • Software lifecycle management using semantic version, • Developing frameworks for complex software tests, • Demonstrated experience working collaboratively on shared codebases, • Excellent documentation skills and attention to detail, • Strong analytical and problem-solving abilities, • Experience with the following:, • Supporting both amd64 and arm64 architectures, • Private Key Infrastructure, • Different boot formats/mechanisms/tools (UEFI, ipxe, iso, grub, uboot, etc), • Ansible/AWX, • Aptly, • Packer What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionCompany Description STS Aerospace is a world-leading provider of reliable, top-quality products for fluid conveyance, serving commercial and military aircraft and the energy, space and marine industries. The depth and breadth of our engineering expertise enables us to design, build and customize fixtures and tooling that will meet the needs and solve the problems you are experiencing now and prevent issues from emerging in the future. Job Description STS Aerospace is looking for a Manufacturing Engineer that is accountable for improving and maintaining first pass yield for specified parts and/or processes. This is accomplished by driving continuous improvement initiatives, process development/modification, documentation of standards/best practices, and equipment onboarding/troubleshooting. Candidate shall also support cross functional initiatives with Production, Quality and Purchasing departments to meet company goals and product quality standards. Scope of Responsibilities: • Troubleshooting of quality issues throughout the production process: welding, brazing, nickel plating, cleaning, and borescope inspection. Additional processes: bending., • Use continuous improvement and lean techniques to increase production efficiency, eliminate waste, and drive cost savings opportunities., • Support production staff with specification/technical knowledge, inspection techniques, weld/braze consumables management and day-to-day trouble shooting efforts., • Documentation and standardization of processes via work instructions and operating instructions to increase efficiency, facilitate cross-training and enable proper equipment usage., • Equipment and tooling on-boarding into production process to support new product, process efficiency, ergonomics or safety. Basic troubleshooting, light-level repair and/or export of orbital weld machines, orbital weld heads, steam cleaning machines, tungsten grinders etc., • Effective communication with production employees, management staff and cross-functional team to ensure the alignment of efforts to meet company goals., • Conduct classes and trainings to support continuous improvements efforts and product quality i.e. Visual Inspection and Back-to-Basics courses., • Manage operator qualifications to ensure production staff is qualified to perform given tasks, • Ability to work in a fast-paced, deadline-oriented team environment, • Ability to read, interpret, translate engineering drawings and customer specifications to drive compliance, • Excellent team player with a great attitude. Accountabilities • Support of Team Goals, Represent company as process expert, requisition tooling and equipment for processes., • Performance Measurement & Performance Evaluation., • Meet team quarterly objectives. Adherence to goals and behaviors associate with achieving them, • First pass yield, • Process compliance (welding, bending, brazing, chemical), • Project completion/execution, • Aging (units over lead-time)Qualifications, • Proven working experience as a manufacturing engineer or in a related field., • Experience in blueprint reading and spec interpretation., • Must be comfortable in a manufacturing environment often fast-paced and loud., • Must be able to stand, lift, walk, bend, and reach during their shift., • Must be comfortable wearing safety glasses., • Work well within a team., • Creative and innovative thinking skills., • Problem-solving skills. Additional Information Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Terrific Opportunity for an Engineer with Excellent Customer Service Skills SWK Technologies is searching for a standout Engineer who loves technology and is ready for a great new challenge and wants to learn! In your new role you will interact with our clients directly onsite and remotely, installing or maintaining their desktops, servers and network environment. This position requires technical skills around Windows 7 and Windows 8 desktop operating systems, as well as Microsoft Windows Server 2008 and 2012 administration skills. Also needs working knowledge of routers, access points, and printers. Excellent written and oral communication skills are essential. Join us in our friendly and professional work environment with this truly unique career opportunity! You’ll be around other talented technology professionals where we all learn from each other and work as a team. Participate in our weekly tech meetings to discuss the latest technologies and help in the development of processes to improve the efficiency and effectiveness of our services. Become a part of our community. This is an excellent opportunity to grow your skill-set with room for advancement. Requirements • A high school degree and at least 3 years experience in the IT service industry, • Experience troubleshooting Microsoft Windows Desktop Operating Systems, • Basic Microsoft Windows Server 2008 and 2012 Administration skills, • Moderate knowledge of routers, firewalls and TCP/IP protocol, • Current technology certifications may be beneficial, • Experience with RMM tools and ticketing software is helpful

Job DescriptionThis is a temporary 6-month contracted 1099 position with no benefits. Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR brNqS9xPBq

Job Description RF Field Engineer Location: Clifton, NJ C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C2 Systems is currently seeking a Radio Frequency (RF)/Field Engineer to join our team. If you are highly motivated and have the ability to work in a fast paced environment, this may be the role for you. You will be interacting with customers and co-workers on a daily basis and providing timely and detailed updates. This position will require you to be in the field 90% of the time. Primary Responsibilities: • Takes the lead on system commissioning, integrations, and activations, • Performs system tests using scanners, spectrum analyzers, transmitters, and other electronic test equipment, • Performs site surveys and in-depth walkthroughs, • Works (hands on) with system components such as antennas, fiber optics, coax, and RF amplifiers, • Troubleshoots and repairs systems for optimal performance, • Application of RF principles/theory (signal path, power, frequency, noise, modulations, etc.), • Multi-tasks on projects on a day-to-day basis, • Maintains test equipment and tools for continuous use, • Travels to various job sites within Maryland and outlying regions (DC, Northern Virginia, Pennsylvania and Delaware) Skills/Qualifications: • 2 year college degree (preferably technical) with relevant coursework, • 2+ years of related experience preferred (previous experience with DAS architecture and other cellular systems), • Knowledge of various wireless technologies (CDMA, WCDMA, GSM, LTE, etc.), • Possess strong technical aptitude and the desire to learn and advance within a technical field, • Comfortable working in high pressure situations, • Ability to receive and give direction on an as needed basis, • Knowledge of RF optimization techniques and best practices, • Proficient in basic computer applications (MS Office, etc.), • Must have a valid driver’s license with reliable transportation In addition, you should have the following characteristics: • Self-motivated and have the ability to work effectively under minimal supervision and direction, • Ability to work in groups, • Passion for learning new technologies, • Ability to work in a fast-paced environment, • Strong written and verbal English communication skills

Job Description SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable, • Provides expertise in field of research, • Performs and reports interim analysis of accumulated data to monitor for the safety purposes, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Preparation of proposal estimates of time and expenses required to complete project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate, • Participates in recruiting activities such as selecting, and orienting employees, • Conducts performance evaluation and provides performance feedback, • Counsels employees to reinforce policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Reinforces business relationships with existing clients and develops new relationships with future clients, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Involved in the sale of company services and secures new business Qualification: • Master’s degree preferred, a minimum of 10-12 years of experience and 8 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) license, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with computer design software (Quake, WEAP, L-Pile, Finite Element Analysis, etc.) While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $150,000–$205,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Job Description: The design engineer shall be responsible for supporting the Project Managers in fulfilling the design obligations of multiple ongoing projects. Responsibilities: • Daily communication with multiple Project Managers, • Reviewing architectural drawings to discern information relevant to the vertical transportation discipline, conveying this information to the Project Manager, • Reviewing construction documents to confirm that VDA recommendations are coordinated, • Creating and modifying drawings of vertical transportation elements, utilizing AutoCAD software and VDA standards, • Performing structural, electrical, and mechanical load calculations, • Coordinating with members of multi-disciplinary building design teams, • Preparing reports, memos, and e-mails regarding VDA design, • Researching manufacturer products for development of design standards, • Preparing specifications for designed vertical transportation system, • Assisting in the review of contractor bids and specifications for compliance with VDA design, • Reviewing vendor shop drawings and “Requests for Information” against VDA design, • Evaluating information for compliance: Using relevant information and individual judgment to determine whether design elements and communications to clients, comply with laws, governing codes, and, both industry-wide and internal, standards., • Communication with external contacts: This includes, but is not limited to contactors, vendors, manufacturers, architects, and other engineering disciplines. Communication includes exchanges by e-mail, other written forms, phone conversation, and in person, • Performing on-site surveys of existing vertical transportation equipment Skills: The following skills are considered essential to be an effective member of the VDA Design Services department: • Ability to read architectural and structural drawings, • Ability to communicate effectively:, • Verbally: In-person, on the phone, and via web meetings, • Textually: E-mail, reports, and providing comments on document reviews, • Ability to create, modify, and review drawings in AutoCAD and REVIT, • Proficiency in Microsoft Office; Word, Excel, PowerPoint, Project, Outlook, • Ability to safely navigate an active construction site or existing hoistway, under proper supervision, • Critical Thinking — Using logic and deductive reasoning to determine applicable information and objectively analyze the information to draw a rational conclusion., • Reading Comprehension — Understanding written sentences and paragraphs in work-related documents., • Active Learning — Understanding the implications of new information for both current and future problem-solving and decision-making., • Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Education: Bachelor’s degree in electrical or mechanical engineering required Experience: None

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: We are looking for a Senior Storage Engineer to play a key role in designing, building, and operating our high-performance storage systems. You will contribute to the evolution of CoreWeave's storage platform by building reliable, scalable, and high-throughput solutions. This role involves close collaboration with engineering teams across infrastructure, compute, and platform to ensure our storage services meet the needs of demanding AI workloads. About the role: • Design and implement storage solutions to support CoreWeave's growing AI and cloud infrastructure needs., • Contribute to the development of exabyte-scale, S3-compatible object storage and integrate dedicated storage clusters into diverse customer environments., • Work with technologies such as RDMA, GPU Direct Storage, SPDK, and distributed filesystems to optimize storage performance and efficiency., • Participate in efforts to improve the reliability, durability, and observability of our storage stack., • Collaborate with operations teams to monitor, troubleshoot, and improve storage systems in production environments., • Help develop metrics and dashboards to provide visibility into storage performance and health., • Analyze telemetry and system data to drive improvements in throughput, latency, and resilience., • Work cross-functionally with platform, product, and infrastructure teams to deliver seamless storage capabilities across the stack., • Share your knowledge and mentor other engineers on best practices in building distributed, high-performance systems.Who You Are:, • Bachelor's or Master's degree in Computer Science, Engineering, or a related field., • 6–10 years of experience working in storage systems engineering or infrastructure., • Strong hands-on experience with object storage or distributed filesystems in production environments., • Experience with one or more storage protocols (e.g. S3, NFS) and file systems such as Ceph, DAOS, or similar., • Proficiency in a systems programming language such as Go, C, or Rust., • Familiarity with storage observability tools and telemetry pipelines (e.g., ClickHouse, Prometheus, Grafana)., • Solid understanding of cloud-native infrastructure, Kubernetes, and scalable system architecture., • Strong debugging and problem-solving skills in distributed, high-performance environments., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $165,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Our flexible work environment, competitive compensation, and supportive culture have resulted in high employee satisfaction and retention and helped us win Best Places to Work awards three years in a row. Position Overview We are seeking a Staff Engineer I to join our growing engineering team. This is an entry-level professional role designed for recent graduates or those beginning their careers in engineering. The Staff Engineer I will develop foundational technical skills, apply prescribed techniques and procedures, and gain exposure to the engineering industry while contributing to a wide range of projects. Work assignments are routine, performed under close supervision, and aligned with established criteria. The role builds foundational engineering or design knowledge, gains industry exposure, and develops awareness of professional and ethical responsibilities. This position is ideal for a motivated individual looking to grow within a collaborative and supportive environment. Key Responsibilities • Data Collection: Gather project information, documentation, and field data to support engineering tasks., • Computations & Analysis: Perform standard engineering calculations and basic technical analysis under supervision., • Drawings & Documentation: Assist in preparing drawings, reports, and visual aids for project deliverables., • Field Observation: Observe construction activities and conduct basic environmental investigations., • Team Collaboration: Work closely with senior staff, following prescribed procedures and demonstrating initiative., • Minimal client contact; only as directed by the Account or Project Manager., • Regularly interacts with other staff., • Receives close supervision on all aspects of assignments., • Reports consistent with current organizational structure. Salary range: $70,000-$80,000 Requirements • Bachelor’s degree in Civil Engineering or a related field, • Ability to perform standard engineering computations, basic site plan support, and drawing preparation, • Familiarity with AutoCAD; willingness to learn Civil 3D and other design tools, • Proficiency with Microsoft Office (Word, Excel, Outlook), • Ability to perform field work and construction observation, • Valid driver’s license and ability to travel to project sites as needed, • Strong oral and written communication skills, • Hybrid/remote work flexibility, • 401(k) with company match, • 15 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering project within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This is a transitional position for someone with the required field experience and/or education to gain project engineering experience in a supervised manner prior to advancing into Project Engineer role. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Designs major portions of an assigned project · Solves complex problems and calculations, using engineering formulas and skills · Evaluates research by others and writes reports · Assists the Project Engineer in the preparation of proposal estimates of time and expenses required to complete the project · Assists the Project Engineer in scheduling staffing requirements for field projects · Assists the Project Engineer in supervising and instructing, as needed, the responsibilities of field personnel on projects assigned to them · Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements · Develops and maintains a schedule and budget for the assigned engineering project · Provides reports on the status of project milestones and adjusts schedules accordingly · Controls expenditures within limitations of project budget · Identifies project staffing requirements and coordinates staffing with supporting organization managers · Coordinates preparation and delivery of project deliverables, design documents, and bid packages · Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing · Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications · Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems · Directs integration of technical activities · Evaluates and presents changes for design, specifications, drawing releases, reports, etc. to the Project Engineer and /or Project manager for approval · Prepares interim and completion project reports · Interfaces with customers to provide project status reports and ensure customer needs are met · Provides status and progress reports to customer, project team, and management · Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project · Supervises field work and performs field work when needed · Establishes work plan and staffing for each phase of project and arranges for recruitment or assignment of project personnel · Confers with project staff to outline workplan and to assign duties, responsibilities, and scope of authority · Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget · Supervises project personnel and oversees their daily activities to ensure it is correct and complete · Reviews status reports prepared by project personnel and modifies schedules or plans as required · Prepares project reports for management, client, or others · Confers with project personnel to provide technical advice and to resolve problems · Coordinates project activities with government regulatory or other governmental agencies · Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis · Travels 25% of the time which may be out of state Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience A minimum of 5-8 years of field and/or related experience where a PE license counts towards that related experience, a bachelor’s degree in a related field, and demonstrates ability to meet the requirements of the job as set forth in this description. Previous construction experience is preferred. Professional Engineer (PE) license is preferred or have the ability to become licensed within 6 months of being in this position. Certificates, Licenses, Registrations 40-hour OSHA HAZWOPER certification Registered Professional Engineer (PE) preferred or have the ability to become licensed within 6 months of being in this position Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $90,000–$120,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients - many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn back-to-back Best Places to Work in NJ awards and driven strong employee retention. Ready to advance your career with a respected industry leader? Apply today and help shape the future of wastewater infrastructure with CP Engineers! Position Overview We are seeking a Group Manager for our Water and Wastewater team with 15+ years of experience to lead the planning, design, and construction of water and wastewater infrastructure projects. This is a high-impact role for a technical expert and proven leader who thrives on interfacing directly with clients to ensure successful project outcomes, managing complex projects and mentoring teams. Deep experience with water and wastewater system engineering is a necessity. The Group Manager – Water Resources Engineering is the entrepreneurial and strategic leader responsible for driving growth, operational excellence, and financial success for the Water Resources Engineering Group at CP Engineers. This leadership role goes well beyond project management: you will shape team culture, own KPIs, make key hiring decisions, and lead the group as a full-fledged business unit within the organization. You are the primary architect for group success - ensuring high client satisfaction, organizational adaptability, and continuous improvement by combining technical knowledge with strong business and people leadership. Core Responsibilities Strategic & Business Leadership -Define and execute annual and long-term business plans for the Water Resources Engineering Group, fully aligned with CP Engineers’ companywide vision. -Establish, monitor, and exceed group-level KPIs covering revenue growth, financial utilization, labor multiplier, and client retention. -Run the group as a business, including forecasting, resource planning, and identifying new opportunities for growth. -Lead efforts to hire, onboard, and develop high-performers (including Project Managers, Market Managers, and key engineers). Financial & Operational Performance -Own the group’s financial health: oversee revenue, profitability, budget stewardship, and capital planning. -Optimize use of project management and financial tools (e.g., Ajera) to actively monitor and improve key metrics. -Ensure streamlined billing cycles, efficient management of work-in-progress (WIP), and strong receivables performance. -Help set and guide pricing, proposal, and contract strategies. Organizational Change & Team Culture -Promote and lead major organizational changes that strengthen how the Water Resources Engineering Group functions. -Champion continuous improvement, adoption of new technologies, and consistent implementation of best practices. -Foster a collaborative, accountable, and high-performance environment—ensuring team engagement and alignment with organizational goals. Client Development & Brand Stewardship -Build durable client relationships focused on satisfaction, sustainability, and repeat engagements. -Represent CP Engineers at high-level meetings, public forums, and industry events, further strengthening the firm’s market position. -Oversee client transitions, relationship continuity, and quality project delivery. -Direct and refine group marketing and pursuit efforts, making full use of CRM and analytics for smarter business development. Talent Management & Staff Development -Recruit, coach, and mentor a multidisciplinary team to assure both professional growth and delivery excellence. -Conduct regular staff reviews and collaborate on individualized development plans that support company objectives. -Drive accountability for individual and group KPIs and ensure compliance with all personnel policies and procedures. Project Oversight & Quality Control -Project Leadership: Oversee all phases of wastewater infrastructure projects, including collection, conveyance, and treatment systems for municipal and county utility authorities. -Technical Excellence: Apply advanced knowledge of physical, chemical, and biological water and wastewater processes, hydraulics, and treatment plant design. -Project Leadership: Oversee all phases of wastewater infrastructure projects, including collection, conveyance, and treatment systems for municipal and county utility authorities. -Technical Excellence: Apply advanced knowledge of physical, chemical, and biological wastewater processes, hydraulics, and treatment plant design. -Provide senior oversight across all group projects, ensuring delivery meets standards for quality, budget, and timeliness. -Standardize project management practices in alignment with established company controls and policies. -Implement robust QA/QC procedures and actively support risk management and continuous learning within the team. Key Performance Indicators (KPIs) (Examples based on 2025 business objectives) -Group Revenue, Revenue Growth, and Labor Revenue Multiplier -Gross and Financial Utilization -Billing Variance (<2.25%) -WIP (<30 Days) and Uncollected A/R (<60 Days) -Client Retention and Satisfaction Metrics -High-Impact Hires Completed and Retained -Execution of Organizational Change Initiatives -Compliance with Internal Project Controls Salary range: $130,000.00-$180,000.00 Why CP Engineers? CP Engineers offers the chance to lead, innovate, and grow a team as your own business within a collaborative and fast-growing firm. If you are energized by leadership, value building high-performing teams, and want to drive real impact in Water Resources engineering, we invite you to apply and shape the future with us. Apply Today. Be the growth catalyst for CP Engineers’ Water Resources Engineering Group. Requirements • Bachelor’s degree in Civil, Environmental, Mechanical, or Chemical Engineering with a focus on Water and Wastewater treatment; Master’s or business credential preferred., • Professional Engineer (PE) license highly preferred, • Minimum 15 years of progressive experience in Water Resources engineering, with substantial leadership and management responsibilities., • Demonstrated success in building and leading high-performing teams, driving business unit success, and consistently surpassing financial and strategic goals within dynamic, growth-oriented environments., • Proven track record of managing medium-to-large complex projects., • Competencies, • Strong business and financial acumen, • Proactive, entrepreneurial mindset, • Advanced leadership, talent development, and organizational change skills, • Highly effective communication, negotiation, and relationship-building abilities, • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Transportation Project Manager to join our team. As a Project Manager specializing in water resource engineering, you will be responsible for leading and managing projects related to water management, drainage systems, flood control, and watershed management. Responsibilities • Lead and oversee water resource engineering projects, including the design, analysis, and implementation of water management systems, drainage systems, and flood/resiliency control measures., • Serve as the primary point of contact for clients, ensuring effective communication and maintaining strong client relationships throughout the project lifecycle., • Manage and mentor a multidisciplinary project team, providing technical guidance, assigning tasks, and ensuring project objectives are met., • Develop comprehensive project plans, including scope, budget, schedule, and resource allocation., • Coordinate with internal and external stakeholders, such as government agencies, environmental consultants, and contractors, to ensure project compliance and successful execution., • Conduct hydrologic and hydraulic modeling, analyze data, and prepare reports and recommendations for water resource management projects., • Evaluate and design stormwater management systems, including detention basins, green infrastructure, and erosion control measures., • Review and approve project deliverables, including design plans, technical specifications, and construction documents., • Monitor project progress, identify potential risks and challenges, and implement effective mitigation strategies., • Ensure compliance with applicable regulations, permits, and environmental standards., • Bachelor's degree in civil engineering, Water Resources Engineering, or a related field. A master's degree is a plus. Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • 10+ years of experience in design, planning, and implementation of stormwater and hydraulic elements with a focus on project management, • Proven track record of successfully managing water resource engineering projects, including drainage systems, flood control, and watershed management. Strong knowledge of hydrology and stormwater and green infrastructure design., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/OpenRoads) and able to assist others as needed., • Proficient with stormwater modeling software such as CivilStorm or StormCAD required., • Business development skills and the proven ability to win work a plus., • Good client relationship development sills., • Experience writing proposals, scopes of work, and budgets for projected work., • Ability to effectively communicate at all levels of the organization., • Ability to manage & mentor staff, and direct resources effectively in a positive manner., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $83,000 - $95,000 Powered by JazzHR yd94kvAx1V

Job Description Our client in Fairfield, NJ is looking for an onsite, direct hire Manufacturing Industrial Engineer. Pay: $120k-$130k The ideal candidate will have an engineering background in mechanical engineering, industrial engineering, systems engineering, value engineering, or related engineering field with concentrated technical knowledge and previous experience in precision metals and plastics manufacturing and/or complex finished device assemblies. Responsibilities: • This role is fundamentally based on long-standing best practices in industrial engineering principles: identifying waste, defining value streams, productivity optimization, kanban setups, takt time studies, labor tracking, ergonomics, material flow, pFMEA, and similar Lean Six Sigma tools., • Support new business development with the purpose of generating accurate and detailed costing proposals that exceed customer expectations for quality, price, and delivery., • Bachelor's degree in Engineering (Mechanical, Industrial engineering, Systems engineering, Value engineering), • Minimum of 5 years of experience in value engineering, industrial engineering, manufacturing costing, or related role in the manufacturing industry, with specific experience utilizing industry 4.0 best practices and/or Lean, • Experience working for a Contract Manufacturer or OEM, • Strong engineering background with a solid understanding of manufacturing processes, materials, and equipment, • Ability to identify the best possible manufacturing processes, • Proficiency in using SolidWorks or equipment CAD/CAM software packages for estimating and DFM purposes, • Experience in product level design for manufacture (DFM), • Ability to collaborate across engineering Centers of Excellence for multi-plant vertically integrated proposals, • Excellent analytical and problem-solving skills, • Strong attention to detail and accuracy, • Effective communication and interpersonal skills, • Ability to work independently and as part of a cross-functional team, • Knowledge of industry standards and best practices in cost estimation

Job DescriptionYU & Associates' is currently searching for an Entry-Level Civil Engineer to join our site/civil department in our Elmwood Park, New Jersey location. The individual will be working on site and airport design, designing mixed-use developments, residential, higher education, and other exciting land development projects. This position will serve as a member of an integrated design team and be responsible for coordinating civil design along other disciplines, to meet project schedules and budgets, while working directly under licensed Engineers. Qualifications: • Bachelor's degree in civil engineering Required; master's degree Preferred., • EIT is strongly preferred., • Demonstrate basic proficiency with AutoCAD Civil 3D, have strong technical skills, and possess the ability to learn and apply new skills quickly and efficiently., • Proficiency with Microsoft Office software including Word, Excel, and Outlook is needed., • Knowledge of MicroStation is a plus., • You must demonstrate strong written and oral communication skills., • Committed to working efficiently to complete tasks under strict schedule restraints., • The ability to work independently or within a team environment., • You must be a self-starter with strong problem-solving skills., • Understanding of basic engineering theories and principles., • Understanding of basic practices of researching engineering and design issues, evaluating alternative, making sound recommendations., • Own transportation and a valid driver's license., • Field and office assignments, as required.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates' is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation Powered by JazzHR y8x0MWginS

Job Description Responsibilities: * Perform security monitoring and assessments of enterprise infrastructure, networks and applications based on the analysis of client's business needs. * Assess infrastructure components for compliance with statutory and regulatory requirements. * Configure and administer tools for monitoring and assessing infrastructure, network and application security. * Conduct security assessments of new technologies and applications before implementation. * Prepare status reports and develop security risk analysis scenarios. * Enforce security policies and procedures, investigate security exceptions, and maintain security controls. Requirements: * Masters degree in Computer Science or Information Systems or related field with 6 months experience as Software Engineer or Developer or Application Development Analyst or related. * Primary worksite is Parsippany NJ but relocation possible. Company DescriptionCanus Tech is a leading technology consulting company that is dedicated to helping businesses unlock the full potential of technology. With a team of experienced professionals, we provide a wide range of consulting services to businesses of all sizes, from small start-ups to large corporations. At our core, we are problem-solvers. We work with our clients to understand their unique challenges and goals, and then develop customized solutions that are tailored to their specific needs. Our team is dedicated to staying up-to-date with the latest trends and best practices in the technology industry, and we leverage our expertise to help our clients stay ahead of the curve.Canus Tech is a leading technology consulting company that is dedicated to helping businesses unlock the full potential of technology. With a team of experienced professionals, we provide a wide range of consulting services to businesses of all sizes, from small start-ups to large corporations.\r\n\r\nAt our core, we are problem-solvers. We work with our clients to understand their unique challenges and goals, and then develop customized solutions that are tailored to their specific needs. Our team is dedicated to staying up-to-date with the latest trends and best practices in the technology industry, and we leverage our expertise to help our clients stay ahead of the curve.

Job DescriptionCompany Description Vichara is a Financial Services focused products and services firm headquartered in NY and building systems for some of the largest i-banks and hedge funds in the world. Job Description Key Responsibilities Architecture & System Design * Architect, design, and lead multi-agent LLM systems using LangGraph, LangChain, and Promptfoo for prompt lifecycle management and benchmarking. * Build Retrieval-Augmented Generation (RAG) pipelines leveraging hybrid vector search (dense + keyword) using LanceDB, Pinecone, or Elasticsearch. * Define system workflows for summarization, query routing, retrieval, and response generation, ensuring minimal latency and high precision. * Develop RAG evaluation frameworks combining retrieval precision/recall, hallucination detection, and latency metrics — aligned with analyst and business use cases. AI Model Integration & Fine-Tuning * Integrate GPT-4o, PaLM 2, and open-weight models (LLaMA, Mistral) for task-specific contextual Q&A. * Fine-tune transformer models (BERT, SentenceTransformers) for document classification, summarization, and sentiment analysis. * Manage prompt routing and variant testing using Promptfoo or equivalent tools. Agentic AI & Orchestration * Implement multi-agent architectures with modular flows — enabling task-specific agents for summarization, retrieval, classification, and reasoning. * Design fallback and recovery behaviors to ensure robustness in production. * Employ LangGraph for parallel and stateful agent orchestration, error recovery, and deterministic flow control. Data Engineering & RAG Infrastructure * Architect ingestion pipelines for structured and unstructured data — including financial statements, filings, and PDF documents. * Leverage MongoDB for metadata storage and Redis Streams for async task execution and caching. * Implement vector-based search and retrieval layers for high-throughput and low-latency AI systems. Observability & Production Deployment * Deploy end-to-end AI systems on AWS EKS / Azure Kubernetes Service, integrated with CI/CD pipelines (Azure DevOps). * Build comprehensive monitoring dashboards using OpenTelemetry and Signoz, tracking latency, retrieval precision, and application health. * Enforce testing and regression validation using golden datasets and structured assertion checks for all LLM responses. Cross-functional Collaboration * Collaborate with DevOps, MLOps, and application development teams to integrate AI APIs with React / FastAPI-based user interfaces. * Work with business analysts to translate credit, compliance, and customer-support requirements into actionable AI agent workflows. * Mentor a small team of GenAI developers and data engineers in RAG, embeddings, and orchestration techniques. Qualifications • Experience:, • 5+ years as an AI or ML Engineer Required Skills & Experience * LLMs & GenAI: GPT-4o, PaLM 2, LangGraph, LangChain, Promptfoo, SentenceTransformers * RAG Frameworks: LanceDB, Pinecone, ElasticSearch, FAISS, MongoDB * Agentic AI: LangGraph multi-agent orchestration, routing logic, task decomposition * Fine-Tuning: BERT / domain-specific transformer tuning, evaluation framework design * Infra & MLOps: FastAPI, Docker, Kubernetes (EKS/AKS), Redis Streams, Azure DevOps CI/CD * Monitoring: OpenTelemetry, Signoz, Prometheus * Languages & Tools: Python, SQL, REST APIs, Git, Pandas, NumPy * Nice-to-Have Skills * Knowledge of Reranker-based retrieval (MiniLM / CrossEncoder) * Familiarity with Prompt evaluation and scoring (BLEU, ROUGE, Faithfulness) * Domain exposure to Credit Risk, Banking, and Investment Analytics * Experience with RAG benchmark automation and model evaluation dashboards Additional Information

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn back-to-back Best Places to Work in NJ awards and driven strong employee retention. Position Overview CP is growing and we are seeking a Water Resources Design Engineer to join our Water Resources Practice. This senior technical role focuses on the design, feasibility, and compliance of water and wastewater treatment facilities, pumping stations, and distribution/collection systems. The successful candidate will ensure all work meets or exceeds current industry standards and regulatory requirements. Key Responsibilities • Design & Engineering: Plan and design water and wastewater treatment facilities, pumping stations, and distribution/collection systems in accordance with industry standards such as AWWA, ASCE, and NSF/ANSI, and in compliance with the Clean Water Act (CWA) and Safe Drinking Water Act (SDWA)., • Feasibility Studies: Conduct feasibility studies for water resources projects, integrating hydrologic, hydraulic, and environmental analyses per EPA and NJDEP guidelines., • Technical Documentation: Prepare engineering reports, technical specifications, and contract documents that conform to NJDEP regulations, NPDES permitting, and other applicable federal, state, and local requirements., • Site Inspections: Perform site inspections and assessments to support design and construction efforts, ensuring compliance with NJDEP, EPA, and local environmental standards., • Regulatory Compliance: Ensure all project activities comply with local, state, and federal environmental regulations, including NJDEP permitting processes (e.g., NJPDES, Freshwater Wetlands Protection Act)., • Sustainability & Best Practices: Incorporate energy and water efficiency measures, life cycle cost analysis, and sustainable design principles as recommended by EPA and national water resources planning guidelines., • Collaboration: Coordinate with multidisciplinary teams and support departments (Structural, Civil, MEP) to deliver integrated project solutions., • Mentorship: Mentor and train junior staff, sharing expertise in regulatory compliance, technical standards, and best practices. Join CP Engineers and help deliver water resources solutions that meet the highest standards of safety, quality, and regulatory compliance. Apply today! Requirements • Bachelor’s degree in Civil or Environmental Engineering or related field, • 10+ years of experience in water resources engineering, • Strong knowledge of NJDEP regulations, permitting processes, and relevant federal standards (EPA, CWA, SDWA), • Experience with AutoCAD and technical report writing, • Excellent analytical, problem-solving, and technical writing skills, • 401(k) match, • Hybrid/remote work flexibility, • Flexible hours, • 20 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job Description About CP Engineers With forty years of experience, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our project portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Our flexible work environment, competitive compensation, and supportive culture have resulted in high employee satisfaction and retention and helped us win back-to-back Best Places to Work awards. Position Overview Due to expansion, we are seeking a Project Engineer for our Municipal & Civil Engineering practice. This role focuses on the design, review, and management of municipal infrastructure and private development projects. The ideal candidate will combine technical proficiency with a strong understanding of regulatory requirements and industry standards. Key Responsibilities • Design & Documentation: Develop and review contract drawings, engineering reports, and technical specifications for municipal infrastructure and private development projects, ensuring compliance with industry standards and best practices., • Regulatory Compliance: Conduct planning and zoning board reviews to ensure all projects adhere to local, state, and federal regulations, including New Jersey Municipal Land Use Law, zoning ordinances, and NJDEP requirements., • Permitting: Assist in preparing permit applications and supporting documentation for regulatory approvals, ensuring accuracy and completeness., • Site Assessments: Perform site inspections, assessments, and evaluations to verify adherence to municipal design standards, environmental regulations, and approved plans., • Stakeholder Coordination: Coordinate with municipal officials, planning boards, and regulatory agencies on land development and public works projects, providing clear technical guidance., • Technical Support: Provide recommendations for stormwater management, grading, roadway improvements, and drainage solutions, applying current standards and design guidelines., • Project Assistance: Support senior engineers and project managers in budget development, project scheduling, and resource allocation to ensure successful project delivery. Join CP Engineers and help deliver high-quality municipal and civil engineering solutions that meet the highest standards of safety, quality, and regulatory compliance. Apply today! Salary range: $85,000.00-$105,000.00 Requirements • Bachelor’s degree in Civil Engineering or a related field, • Minimum of 4 years of experience in municipal engineering, with a focus on contract drawings, planning & zoning board reviews, and stormwater engineering, • Proficiency in AutoCAD and Civil 3D, • Strong understanding of New Jersey municipal land use regulations, zoning ordinances, and permitting processes, • Experience with NJDEP regulations, stormwater management design, and municipal site plan preparation, • Hybrid/remote work flexibility, • 401(k) with company match, • 16 days paid time off, • Tuition, professional license, and association fee reimbursement, • Medical, dental, and vision coverage, • Support for employee work/life balance, • Training and development opportunities

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Directs, coordinates, and exercises functional authority for planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. Works collaboratively with Principal and the client to solve the client’s problems in all of their interactions. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Manages and performs site investigations, • Evaluates the surface and/or subsurface conditions and provide recommendations, • Plans and implements engineering program, including defining the project philosophy, activities, milestones, and staff requirements per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, bid packages and proposals, • Assigns and oversees project personnel to specific phases or aspects of project such as technical studies, product design, preparation of specifications and technical plans, and product testing, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Interfaces with customers to provide project status reports and ensure customer needs are met, • Provides status and progress reports to customer, project team, and management, • Plans schedule of research according to company’s or contracting organization’s timetable, and establishes daily or weekly routines necessary to meet project timetable., • Provides expertise in field of research, • May participate in recruiting activities such as selecting, orienting, and training employees, • Conducts performance evaluation and provides performance feedback, • Counsels, and disciplines employees to reinforces policies and procedures, • Manages employees, provides oversite and direction, • Coaches, mentors, provides training and staff career development, • Performs and reports interim analysis of accumulated data to monitor for the safety purpose, • Develops research plan, designs experiments, outlines research procedures to be followed, and identifies and/or provides training to subordinate personnel to carry out research, • Establishes major design parameters for projects in conjunction with project design team and client, • Reinforces business relationships with existing client and develops new relationships with future clients, • Prepares proposal estimates of time and expenses required to complete a project, • Affixes their Professional Engineers seal on the completed work after verifying work is accurate Qualifications: • Bachelor’s degree in Civil Engineering, a minimum of 8-10 years of experience and 5 years of project management related experience. Previous construction experience is preferred., • Professional Engineer (PE) is required., • Certificates, Licenses, Registrations, • 40-hour OSHA HAZWOPER certification, • Registered Professional Engineer (PE), • Valid Driver’s License and possess reliable transportation to access job sites, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 10% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $105,000–$150,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: We are seeking a highly skilled Senior Data Center Mechanical Engineer to support the design and delivery of our growing data center portfolio. This role requires strong technical expertise to develop and implement innovative mechanical solutions, such as advanced chilled-water systems, liquid cooling, and optimized airflow strategies, while ensuring consistency, scalability, and efficiency across projects. The Senior Data Center Mechanical Engineer will serve as a subject matter expert, partnering with internal teams and external consultants to deliver cutting-edge, reliable facilities at scale. Travel will be required to various data center sites. About the role: • Act as a subject matter expert on mechanical design for assigned projects, ensuring alignment with the company's Basis of Design, standards, and long-term portfolio goals., • Manage the mechanical design process, coordinating consultants, vendors, and internal stakeholders to ensure schedules, budgets, and quality requirements are met., • Review design drawings, specifications, and shop drawings, providing technical direction and ensuring compliance with owner requirements., • Shape the long-term cooling strategy by evaluating emerging technologies (e.g., liquid cooling, advanced economizer designs, high-density airflow solutions) and recommending integration paths that support the portfolio's future growth and efficiency goals., • Support commissioning and site activities by validating that systems meet design intent and operational requirements., • Demonstrated ability to apply innovative approaches to cooling and efficiency challenges., • Collaborate closely with IT, operations, and project management teams to deliver integrated, future-ready infrastructure., • Bachelor's degree in mechanical engineering. Professional Engineering license preferred., • 5–7+ years of mechanical design experience in data centers or mission-critical facilities., • Strong knowledge of chilled-water and air-cooled systems, liquid cooling solutions, and redundant piping configurations., • Familiarity with controls/BAS systems and the ability to develop sequences of operation., • Experience with computational fluid dynamics (CFD) modeling and energy analysis preferred., • Demonstrated ability to apply innovative approaches to cooling and efficiency challenges., • Strong problem-solving, analytical, and communication skills. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $122,000 to $179,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Parsippany, N.J. SESI has earned an excellent reputation for providing innovative Geotechnical, Site/Civil, and Environmental engineering solutions for owners, developers, and the construction industry throughout the NJ, NY, CT region. SESI Consulting Engineers has been selected as one of NJBIZ’s "FASTEST GROWING" Companies and Inc.'s "5000 America’s Fastest-Growing Private Companies". Join a company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI offers a competitive compensation and benefits package which includes medical, dental, vision insurance, 401(k), paid time off, tuition reimbursement, professional development assistance, bonus potential, employee engagement activities, just to name a few. SESI also engages its employees in all aspects of its projects and encourage them to participate in design and project management functions to their full potential. Summary Coordinates the planning, organization, control, integration, and completion of engineering projects within area of assigned responsibility by performing the following duties personally or through subordinate supervisors. This staff position is considered a training position for those with degrees in a related field but with limited to no field experience. Essential Duties and Responsibilities include the following. Other duties may be assigned. • Conducts site inspection to monitor progress/conformance to specs and procedures, • May be expected to design portions of a project, • Makes calculations, using engineering formulas and skills, • Instructs drafters how to reduce designs into completed drawings, • Conducts routine geotechnical engineering laboratory checks, • Leads concrete and rebar inspection testing, • Performs research and writes reports, • Prepares samples of unapproved materials for laboratory testing, • Uses computer to run standard programs to solve engineering problems, • Performs routine laboratory tests to determine various design parameters, • Plans and implements engineering programs, including defining the project philosophy, activities, milestones, and staff requirements, per customer requirements, • Develops and maintains a schedule and budget for the assigned engineering project, • Provides reports on the status of project milestones and adjusts schedules accordingly, • Controls expenditures within limitations of project budget, • Identifies project staffing requirements and coordinates staffing with supporting organization managers, • Coordinates preparation and delivery of project deliverables, design documents, and bid packages, • Reviews product design for compliance with engineering principles, company standards, customer contract requirements, and related specifications, • Coordinates activities concerned with technical developments, scheduling, and resolving engineering design and test problems, • Prepares interim and completion project reports, • Provides status and progress reports to customer, project team, and management, • Classifies soils according to standard types, • Applies geological knowledge to engineering problems encountered in construction projects, such as dams, tunnels, and large buildings, • Prepares geologic reports and maps, interprets research data, and recommends further study or action, • Conducts or participates in environmental studies and prepares environmental reports, • Directs drilling of exploratory borings and wells, • Oversees installation of monitoring wells in accordance with state and federal requirements, • Collects or supervises collection of soil and groundwater samples for analysis of chemical composition, • Determines direction of groundwater flow based on review of historical records and site specific data, • Determines the nature and extent of contamination in soil and groundwater at environmental sites, • Participates in decision making regarding research priorities and provides information on feasibility of prospective projects, • May lead junior level staff and interns by providing guidance, answering questions and being a resource to them, • May direct tasks, other junior level staff and interns as needed, • Identifies the potential for new projects and seeks opportunities to promote the company’s services on an ongoing basis, • Travels 25% (Site) to 100% (Geotechnical/Environmental) of the time which may be out of state Supervisory Responsibilities: This job has some supervisory responsibilities. Qualifications: • Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations., • Bachelor’s degree in Civil Engineering with a minimum of 0 to 3 years of Site Civil, Geotechnical or Environmental engineering experience. Previous Internship or construction experience is preferred., • Experience with inspection of compacted fills, footings, ground improvement, deep foundations, retaining walls, utilities, asphalt, concrete, sitework elements., • 40-hour OSHA HAZWOPER certification, • Engineer in Training (EIT) preferred or have the ability to become registered within six months., • ACI/NICET/NJ DCA Special Inspector and Nuclear Densometer certification a plus, • Able to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry., • Able to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, MS Word, Excel, Adobe. While performing the duties of this Job, the employee is frequently required to stand; walk and sit. The employee must frequently lift and/or move up to 50+ pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Approximately 25% to 100% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Compensation: Base salary $55,000–$80,000 + overtime, mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job Description Senior System Administrator Five Rivers IT is a rapidly growing Managed IT support firm headquartered in Northern New Jersey, serving clients both locally and beyond. We are dedicated to delivering valued leadership and comprehensive managed IT support services to small and mid-market companies. With a primary focus on delivering cost-effective and secure solutions, we empower our partners to scale efficiently and confidently in today's competitive landscape. We are currently seeking a Senior System Engineer to take ownership of managing and optimizing our AWS and Azure environments across both Windows and Linux platforms. In this role, you will support development workflows, ensure the security and reliability of our hybrid cloud infrastructure, and drive efficiency through automation. Key responsibilities include troubleshooting complex multi-platform systems and network issues, performing regular system maintenance, managing cross-platform deployments. The ideal candidate will bring deep expertise in both Windows and Linux administration, a strong focus on automation practices, and a proactive approach to solving challenges. Success in this position requires thriving in a dynamic, fast-paced environment where adaptability and forward-thinking are highly valued. Responsibilities: * Managing AWS/Azure cloud infrastructure supporting both Windows and Linux-based workloads * Root cause identification and remediation of security/system alerts across Windows and Linux environments * Performing server and network troubleshooting using both PowerShell/GUI tools and Linux command-line utilities * Regular system maintenance including patch management for Windows Updates and Linux package updates * Managing application deployments through CI/CD pipelines supporting both Windows and Linux targets * Implementing and following change control processes for multi-platform infrastructure modifications * Document new procedures and maintain runbooks for both Windows and Linux system operations * Work on automation projects spanning Windows and Linux environments in a timely manner * Participate in an on-call rotation schedule for off-hours escalations across all platforms Required Skills: * At least 5 years of experience in Windows System Administration (Windows Server, Active Directory, Group Policy) * Preferred 3 years of experience in Linux System Administration (RHEL, Debian, Ubuntu, CentOS / Rocky, Amazon Linux) * At least 5 years of experience in Network Administration across Windows and Linux environments * At least 3 years of experience managing Azure & Azure DevOps with both Windows and Linux pipelines * At least 3 years of experience managing AWS environment including both Windows EC2 and Linux instances * Proficiency in PowerShell for Windows automation and Bash/Python for Linux scripting * Experience with containerization on both platforms (Docker on Windows/Linux, Windows Containers) * Strong experience with Infrastructure as Code tools (Terraform, ARM templates, CloudFormation) * Understanding of cross-platform networking: Active Directory, DNS, DHCP, VLANs, VPNs, and Linux networking * Advanced understanding of protocols: TCP/IP, SMB/CIFS, SSH, RDP, SSL/TLS, Kerberos * Strong motivation to automate operations across Windows and Linux using appropriate tools * Experience with configuration management for both platforms (DSC, Ansible, Group Policy) * Strong interpersonal and communication skills for cross-functional collaboration * Ability to multi-task and prioritize in mixed Windows/Linux environments * Excellent collaboration skills and ability to work in hybrid DevOps teams Other Details about the Job • This is a Full-Time position., • All standard benefits are included such as medical/dental/vision insurance and vacation time., • We encourage and reward professional certifications, • Salary will be based on experience. Please send your resume with the expected salary. Applications lacking expected salary will not be considered. g4wwE9r0ec

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. What You'll Do: We are seeking a Senior Platform Engineer to join our Kubernetes Infrastructure team. This role involves administering our critical multi-tenant Kubernetes platforms and collaborating with development teams to establish proper deployment architectures. The ideal candidate will have a strong background in resilient kubernetes application architecture and deployment. About the role: • Champion reliability initiatives for Kubernetes application deployments: Advocate for best practices to ensure high availability, scalability, and resilience of applications in Kubernetes, focusing on robust testing, secure pipelines, and efficient resource use., • Administer multi-tenant Kubernetes platforms: Manage complex multi-tenant Kubernetes clusters, configuring access, quotas, and security for isolation and optimal resource allocation while upholding SLAs., • Perform lifecycle and day 2 operations on clusters: Execute Kubernetes cluster lifecycle, including provisioning, patching, monitoring, backup, disaster recovery, and troubleshooting., • Deep dive into reliability issues: Conduct in-depth analysis and root cause identification for complex reliability incidents in Kubernetes, utilizing advanced debugging and monitoring tools to propose preventative measures., • Perform on-call duties: Respond to critical alerts and incidents outside business hours, providing timely resolution to minimize disruptions, collaborating with teams, and communicating clearly.Who You Are:, • Bachelor's in CS, Engineering, or related field, or equivalent experience preferred., • CKA or similar certifications is highly desired., • 2+ years administering multi-tenant SAAS Kubernetes (EKS, AKS, GKS)., • Strong Gitops/Devops with Argocd or similar helm chart management., • Proven Docker and containerization experience., • Strong Linux OS experience., • Proficient in Go., • Excellent problem-solving, debugging, and analytical skills., • Master's degree in Computer Science, Engineering, or a related field., • Experience with performance profiling and optimization of distributed systems., • Knowledge of network protocols and distributed consensus algorithms. Wondering if you're a good fit? We believe in investing in our people, and value candidates who can bring their own diversified experiences to our teams – even if you aren't a 100% skill or experience match. Why CoreWeave? At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences, • Achieve More Together We support and encourage an entrepreneurial outlook and independent thinking. We foster an environment that encourages collaboration and provides the opportunity to develop innovative solutions to complex problems. As we get set for take off, the growth opportunities within the organization are constantly expanding. You will be surrounded by some of the best talent in the industry, who will want to learn from you, too. Come join us! The base salary range for this role is $165,000 to $242,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Snipebridge, a strategic talent solutions company specializing in connecting exceptional talent to great career opportunities in the Architecture & Planning industry, is seeking a Supervising Engineer -Water Resources. Our client is an ENR Top 500 Design firm focused on geotechnical, environmental, water, ecological, and construction management services that has been delivering exceptional services for more than six decades. Their multidisciplinary team tackles intricate projects in diverse industries such as transportation, energy, infrastructure, and development. The firms long-standing commitment to technical excellence and client satisfaction has fueled their growth and success. They offer a collaborative and dynamic work environment where talented individuals can thrive and contribute to impactful projects. Position Summary This key position demands strong client-facing skills alongside the ability to lead and mentor staff-level engineers. A critical aspect of the role involves partnering with the firms dams/levees/water resources Practice Leaders to actively develop and expand our market footprint within New Jersey, New York, and Pennsylvania. Primary Responsibilities: • Supervising and scheduling geotechnical and structural engineering staff and providing technical direction and oversight., • Senior project management of interdisciplinary teams of geotechnical, structural, hydrologic/hydraulic, and civil engineers; to include, scheduling and supervising project meetings, producing and managing project schedules and budgets., • Managing and reviewing the preparation of construction plans and technical specifications., • Supervising and reviewing dam and/or levee safety inspections., • Providing leadership/mentoring to technical staff., • Managing and tracking budgets, creating project invoicing and Client follow-up, • Communicating effectively and efficiently with team members, clients and contractors., • Interacting with clients and regulatory agencies., • Preparing technical and cost proposals., • Supervising fieldwork including test borings and instrumentation installations and construction monitoring for dam and levee rehabilitation projects., • Providing data analysis, organization, and interpretation in support of dam/levee inspections, evaluations, and rehabilitations projects., • Executing and/or supervising engineering analyses including seepage and slope stability analyses of embankment dams and levees, drainage and filter designs, gravity dam stability analyses., • Writing and/or reviewing field reports, inspection/engineering reports, and permit applications. Education/Skills/Experience: • B.S. in Civil Engineering or related field of practice is required. Master’s Degree with a Geotechnical focus is a plus., • Professional Engineer license in NJ with the ability to obtain PE in NY and PA., • 15 to 20 years of experience in civil – geotechnical engineering, with direct involvement in dam safety inspections, condition assessments, subsurface exploration programs, engineering analyses, dam rehabilitation design, and regulatory permitting., • Experience completing projects with public sector/municipal agencies in New Jersey, New York and Pennsylvania is highly preferred., • Proven experience with design and development of engineering technical specifications, cost estimating and other related bidding documents., • Strong interpersonal skills and ability to speak publicly., • Solid project financial management skills; knowledge of production support systems and personal computer proficiency are all required competencies., • Experience in providing technical and project leadership to staff-level or junior engineers., • A strong background using various geotechnical computer software such as SEEP/W, SLOPE/W, and finite element analysis software such as PLAXIS are preferred., • Knowledgeable of dam and levee safety guidelines utilized by the U.S. Army Corps of Engineers, Bureau of Reclamation, Federal Energy Regulatory Commission, Natural Resource Conservation Service, and other Federal agencies, as well as State Dam Safety agencies. All applicants must be legally authorized to work in the United States without sponsorship and must already possess long-term work authorization.

Job Description CoreWeave is the AI Hyperscaler™, delivering a cloud platform of cutting edge services powering the next wave of AI. Our technology provides enterprises and leading AI labs with the most performant, efficient and resilient solutions for accelerated computing. Since 2017, CoreWeave has operated a growing footprint of data centers covering every region of the US and across Europe. CoreWeave was ranked as one of the TIME100 most influential companies of 2024. As the leader in the industry, we thrive in an environment where adaptability and resilience are key. Our culture offers career-defining opportunities for those who excel amid change and challenge. If you're someone who thrives in a dynamic environment, enjoys solving complex problems, and is eager to make a significant impact, CoreWeave is the place for you. Join us, and be part of a team solving some of the most exciting challenges in the industry. CoreWeave powers the creation and delivery of the intelligence that drives innovation. About the role: The Data Platforms Team serves as the experts on data ingestion, data flow and retrieval for CoreWeave. This team is responsible for the development of use cases, discovery of innovative solutions, automation and operations of our data platform infrastructure. We are seeking a senior engineer with specialization in data platforms and stream processing who can help us fulfill the goal of our multi-regional datastore strategy and establish communication models for our data flow. This individual will work with a team of 6-8 mixed skill engineers and have the opportunity to work on the full gamut of rewarding challenges that come with the business of building a cloud in a communicative, supportive, and high-performing environment. As a member of the Data Platforms Team you will have the opportunity to: • Identify and develop applications for the organization's data. This involves understanding business needs and creating solutions that leverage data effectively., • Design and implement the platform to deliver data to teams with a focus on providing managed solutions., • Participate in operations and scaling of relational data platforms., • Develop a stream processing architecture and solve for scalability and reliability., • Improve the performance, security, reliability, and scalability of our data platforms, and related services and participate in the teams on-call rotation., • Establish guidelines, guard rails for data access and storage for stakeholder teams., • Ensure compliance with standards for data protection regulation., • You have six or more years of experience in a software or infrastructure engineering industry., • You enjoy helping your colleagues achieve more with less effort., • You have experience operating services in production and at scale and are versed in reliability engineering concepts such as the different types of testing, progressive deployments, error budgets, the role observability, and fault-tolerant design., • You understand data consistency and concurrency models, can clearly define data models and establish guidelines around data management., • You're excited about new research in data structures., • You're familiar with distributed NewSQL datastores such as CockroachDB, TiDB, YDB, Yugabyte and/or stream processing tools such as NATS or Kafka., • You have experience with designing and operating these systems at scale., • You're familiar with Kubernetes and have interest or experience with using it for event-driven and/or stateful orchestration., • You're excited to have the opportunity to contribute to a Kubernetes operator in order to manage data systems., • You know your way around a Linux distro, shell scripting, and the Linux storage and networking stacks., • You can transform problems in elastic solutions, decompose them into achievable tasks, and socialize both to your teammates., • You have a proficiency in go, python, java, and/or C and you're interested in contributing to open source. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description SESI Consulting Engineers, founded in 1976, is a well-established, progressive, consulting engineering firm in Pine Brook, N.J. SESI has earned an excellent reputation for providing innovative geotechnical, site/civil, and environmental engineering solutions for owners, developers, and the construction industry in the NJ, NY, CT region. SESI is currently expanding to meet the needs of existing clients. Join a well-established, fast-growing company recognized for providing solutions, excellence, service, and integrity. We seek dynamic individuals to support organic growth. SESI engages its employees in all aspects of its projects and encourages them to participate in design and project management functions to their full potential. SESI Consulting Engineers has been selected as one of NJBIZ’s 2020 Fifty "FASTEST GROWING" Companies! We offer a competitive compensation and benefit package to include health, dental, vision insurance, retirement plan, paid time off, tuition reimbursement, professional development assistance, bonus potential, just to name a few. Summary SESI seeks an Assistant Project Engineer to work in its Site/Civil Department. This individual will serve a key function in helping design commercial, residential, mixed-use, and industrial developments. In this role, you will have the opportunity to work in a dynamic, collaborative environment. Essential Duties and Responsibilities include the following. Other duties may be assigned. · Prepare and update various engineering documents such as reports, specifications, plans, construction schedules, cost estimates and design plans for projects using AutoCAD Civil 3D and associated software packages. · Use reports, maps, drawings, engineering plans, tests, and aerial photographs to assess soil composition, terrain, hydrological characteristics, and topographical and geologic data and their impact on the planning and design of projects. · Familiarity with current local, state (New Jersey and New York), and Federal Permitting regulations · Must be willing to work in the field as necessary; · Position requires work Monday through Friday with occasional evenings and weekends; and Performs other duties as requested Supervisory Responsibilities This job has some supervisory responsibilities. Qualifications - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to review and understand plans, specs, and reports including site, grading, utility, foundation, details, structural, drawings, architectural, grading, federal, state and local regulations. Education and/or Experience · Bachelor of Science in Civil Engineering; · 4-8 years of prior relevant professional experience in site/civil design, including site planning, grading, stormwater management, and erosion control measures; · Excellent written and verbal communication skills; · Proficient in AutoCAD and Civil 3D; · Strong attention to detail with excellent analytical, multitasking, and judgment capabilities; · Reliable transportation to access job sites with a valid driver’s license in good standing; and · Demonstrated ability to follow direction and work in a collaborative team environment Certificates, Licenses, Registrations · FE/EIT certification required; PE desired; · Valid Driver’s License and possess reliable transportation to access job sites Language Skills Proficient in communicating both verbal and written in the English language. Proficient in communicating both verbal and written in the English language. Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills Proficient or familiarity with AutoCAD, Autodesk Civil 3D, NitroPro, GSLOPE, KeyWall, Rocscience, MS Word, Excel, Adobe. Tools/Equipment Position requires ability to use tools such as a lump hammer, shovel, hand auger, Nuclear Density Gauge. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; talk or hear and taste or smell. The employee must frequently lift and/or move under 50 pounds. The employee is frequently required to use hands or fingers to handle or feel objects, tools, or controls. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. The noise level in the work environment is usually low to moderate. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of work will be conducted in an office setting. Approximately 25% of the work is conducted outdoors. Worker must be able to walk frequently on uneven hard and soft ground/terrain in all types of weather conditions to include cold, hot rain, snow, ice, etc. Employees working in the field may also be exposed to sun, wind, insects, plants, animals, etc. As a result, appropriate clothing for outdoor work, work boots, safety glasses, hard hat, safety vest is required while working in the field. Base salary $75,000–$95,000, + mileage reimbursement, benefits, paid time off, tuition reimbursement, professional development opportunities, 401(k), and bonus potential.

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Water Resource Engineer to join our team. As a Senior Water Resource Engineer, you will play a critical role in the planning, design, and management of water resource projects, focusing on civil engineering, hydraulic modeling, water control, and stormwater treatment structures. Job Description: • Support various phases of our water/wastewater design projects., • Prepare comprehensive reports, opinions, and recommendations based on research, analysis, and interpretation of studies., • Manage Water Resource aspects of project budgets and deadlines., • Leading project design efforts, and/or design team coordination., • Drafting and designing plans as necessary utilizing Civil3D software., • Liaise with clients, regulatory agencies, and stakeholders to ensure project objectives are met and maintain positive relationships., • Responsible for meeting internal and/or external deadlines., • Coordinating with other teams or groups to assure resource management for all projects or tasks., • Stay current with industry trends, regulations, and best practices related to water resource engineering., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor’s degree in civil engineering, concentration in Water Resources preferred., • PE License in New Jersey and/or New York required, or ability to obtain within 6 months., • A minimum of 5 years’ experience in stormwater management systems, wastewater/sanitary systems, and project permitting is required., • MS Office proficiency., • Skilled with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads)., • Knowledge of stormwater modeling software such as CivilStorm or StormCAD required., • Strong knowledge of hydrology and stormwater and green infrastructure design, • Strong oral and written communication skills, self-motivation, team-oriented work practices, data analysis & technical problem solving, organizational skills and the ability to work effectively in a multi-disciplinary team environment., • Ability to travel to job sites.We offer employees competitive compensation packages, medical/dental/vision, life insurance, short, and long-term disability, paid holidays, paid time off, and 401k retirement plan with company match. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. SALARY RANGE: $105,000 TO $120,000 Powered by JazzHR MCFsV5IdnN

Job DescriptionYU & Associates, Inc., an awarding winning engineering firm located in Elmwood Park, New Jersey is seeking a Senior Transportation Engineer to join our team. The successful candidate will manage, organize, design, and execute highway, roadway, and other Civil Engineering projects. Responsibilities: • Executes required aspects of roadway engineering based on a solid understanding of engineering fundamentals and advanced concepts., • Responsible for the design of roadway horizontal and vertical geometry, • Design Maintenance of Traffic (MOT / MPT) plans and specifications, • Coordinates a multi-disciplinary team to deliver projects and tasks., • Coordinates and reviews the work of the project team comprised of engineers, and technicians., • Assist project manager with technical and management collaboration., • Collaborate with project manager for project progress and status reports, schedule, and budget., • Tracks the progress of deliverables, client reviews, technical input, and comment resolution., • Assist project manager with scope and fee for projects., • Prepare administrative, technical, or statistical reports on traffic-operation matters, such as accidents, safety measures, or pedestrian volume or practices., • Evaluate transportation systems or traffic control devices or lighting systems to determine need for modification or expansion., • Support and participate in the development and mentorship of staff.Requirements:, • Bachelor’s degree in civil engineering is required, emphasis in transportation preferred., • Professional Engineer License in New York and/or New Jersey is required, or ability to obtain within 6 months., • Minimum 5+ years of transportation design experience. Highway/roadway design experience a plus, • Strong written and verbal communication skills., • High attention to detail and accuracy., • Proficient with CAD/Design Software (AutoCAD, MicroStation, Civil 3d, Inroads/Openroads) and able to assist others as needed., • Proficient in Microsoft Office Suite. YU & Associates’ is an Equal Employment Opportunity employer fully committed to providing equal opportunity in all areas of employment practices. No employee or applicant for employment is discriminated against because of race, creed, color, religion, gender, gender identity or expression, sexual or affectional preference, sexual orientation, sex, ancestry or national origin, citizenship status, age, disability, marital or domestic status, veteran status, atypical hereditary cellular or blood trait, genetic information or testing, or any other legally protected category in all employment decisions. We foster a work environment that’s inclusive as well as diverse, where our employees can be themselves. Every idea and perspective are valued to meet our common goals. YU & Associates is committed to supporting our employees’ well-being by providing benefits that are a valuable part of the compensation package. We partner with our employees to foster a healthy, safe and rewarding lifestyle both at work and at home. The Y&A benefits program for full-time employees include: · Benefits: • Medical-National plan with low out of pocket costs to members., • Dental-National plan., • Vision-National plan with the largest vision network., • Life/AD&D-Benefit available should an employee pass away while employed., • Short-Term Disability-Benefit in the event an employee is unable to work for a short period of time., • Long Term Disability-Benefit in the event an employee is unable to work for an extended period., • Employee Assistance Program-Employee 3rd party support available when needed., • ADP Retirement Plan with company match., • Bonus Program – based on individual and company performance., • Yearly review – based on individual and company performance.Tax Savings Tools:, • Healthcare Reimbursement Accounts-Tax Free benefit to employees., • Flexible Spending Accounts-Tax Deductible benefit for employees., • Dependent Care and Commuter Program-Tax Deductible benefit for employees.Value Adds:, • Will Preparation, • Beneficiary Grief Support SALARY RANGE: $105,000 TO $120,000 Powered by JazzHR pGxf1nQ1gP