Trabajos development engineer en Medford, New YorkCrear alertas

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $90,000 - $120,000 annual based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 3- 7 minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team.

Job Description Join North Wind – Accelerating Hypersonic Innovation At North Wind, we are advancing hypersonic technologies through cutting-edge research, system development, and flight testing. Our team drives innovation in high-speed aerodynamics, propulsion systems, and mission-critical components, supporting every phase of hypersonic programs - from R&D to flight testing, If you are passionate about pushing technological boundaries in a dynamic environment, we invite you to join us. Position Overview: The Propulsion System Analysis Engineer performs steady-state and transient modeling of the performance and operability of high speed aerospace propulsion systems to support all phases of vehicle development, including design, integration, and ground and flight test. This role contributes to aerospace system design and optimization by delivering accurate numerical insights validated against physical models and test data, while collaborating closely with multidisciplinary engineering teams. Responsibilities: • Support propulsion system design and analysis tasks using classical propulsion cycle code methods and emerging engineering tools., • Develop new physics-based design and analysis tools for propulsion system components and technologies., • Perform analysis of internal flows of airbreathing propulsion flowpaths, including high-speed systems with complex shock / boundary layer interactions, combustion, and thermal management., • Develop and recommend design solutions to optimize airbreathing propulsion performance and operability for high-speed systems., • Support multidisciplinary design optimization (MDO) efforts, including integration of propulsion models with aerodynamics, airframe structures, power, and controls simulations., • Prepare clear technical documentation, analysis summaries, charts, and presentations for internal reviews and external stakeholders., • Interface with customer technical representatives to review and discuss analysis activities and results. Preferred Education / Experience: • Bachelor’s degree in mechanical or aerospace engineering or related discipline., • At least 5 years of experience in high speed airbreathing propulsion or similar industry; or, • A combination of education and experience equivalent to above. Preferred Knowledge / Ability: • Experience with design and analysis of ramjet and scramjet engines and related vehicle system design and analysis., • Demonstrated application of engineering design and analysis codes for engine flowpaths, cycle analysis for different classes of propulsion systems, and aerothermal analysis., • Deep competency in thermodynamics and gas dynamics, including experience with propulsion system related analysis tools (e.g., CEA and REFPROP)., • Strong programming skills for modeling and analysis (e.g., Python, MATLAB/Simulink, Fortran, or C++), including scripting for automation of simulations and data reduction., • Experience with high-speed vehicle design, propulsion / airframe integration, and / or trajectory analysis, CFD, and optimization codes a plus., • Familiarity with ground or flight testing of airbreathing propulsion systems., • Strong analytical mindset with rigorous attention to validation, verification, and engineering accuracy., • Proficiency in interpreting engineering plans, technical drawings, and specifications., • Strong written and verbal communication., • Active U.S. security clearance preferred; candidates must be U.S. citizens and eligible to obtain and maintain a clearance. North Wind is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. North Wind supports safe and drug free workplace through pre-employment background checks and drug testing. The salary range provided is a general guideline. Actual pay will depend on several factors, including, but not limited to, education, experience, training, and other applicable qualifications. North Wind is committed to pay transparency in compliance with applicable state and local laws. All candidates must be eligible to work in the United States.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development, • Vision insurance, • Wellness resources Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive PositionEssential Skills:, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Legally authorized to work in the US and able to successfully pass a personal background check and drug screening Non-Essential Skills:, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Basic understanding of an MRP or ERP systemPhysical & Mental Demands: · Regularly required to sit, walk, bend, stoop and stand within an industrial environment • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules;

Job Description For more than 60 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY location. The compensation for this role is $120,000 - $160,000 annually based on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: To continue to meet our customer’s mission critical needs, PDC is seeking an Analog/Mixed Signal Design Engineer to join our dynamic, growing organization as a valued member of our team. The candidate needs experience in developing devices with active / passive signal converter & conditioning circuits and switching power control / driver circuits; designs are implemented either as a multi-chip & wire hermetically-sealed hybrids, or as SMT Circuit Card Assemblies (CCA’s). Responsibilities: • Key role: Take primary technical leadership in the design and support of our Synchro / Resolver to Digital, DATEL A2D & D2A mixed signal converter product lines, and our switched-mode multi-phase Brushless DC Motor (BLDC) driver & controller product lines. This requires a deep understanding of analog / mixed signal analysis and design techniques to ensure device specifications are met with robust margin. You will guide an interdisciplinary Engineering team through the phases of product life cycle development from requirements, architecture, & detailed design, through to device verification, qualification, and manage the transition to production. Our legacy models require continuous obsolescence review and at times may need redesign to support our mil- aero customer base. Requirements: • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree a plus., • 7+ minimum years of experience, • Deep bench of Analog Circuit design experience in multiple A to D architectures (multiple pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling). Experience should cover low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap reference, Oscillators, Op-amps, Switched Capacitor Circuits, Active Filters, single ended & differential circuits, phase / frequency control loops and stability analysis. Comfort working both time & frequency domains a plus., • Experience in power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN Power devices., • Analog / mixed signal ASIC design and verification using Cadence or Tanner tool suites., • Experience with space-level radiation tolerant / hardened design, rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • Sensors, including LVDT, Synchro / Resolvers and Encoders., • Control theory and Matrix mathematics including Z domain transform for digital control; Experience with Motor control simulation, • Clark and Park transform theory, • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI., • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro, PADS., • Candidate must be a US Citizen, Permanent Resident or Green Card Holder due to Export control laws. Essential Duties: • Develop clear requirements and specs from marketing / customer documents., • Provide early customer interaction to guide requirements toward more realizable product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog and digital hardware design solutions. Consider & pursue patent application for differentiators that will help secure competitive advantage., • Generate reports and present findings to the team throughout the review process. Facilitate DFM by coordinating teams of varied technical disciplines through a clearly defined design process. Co-ordinate technical reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for product cost, performance, feature set, time to market, and technical risk. Anticipate potential difficulties and develop alternative plans., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure meeting all environmental requirements for the application., • Develop project plans, budgets, schedules, and identify the resources to progress from market requirement through product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Contribute technical input, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to facilitate greater levels of technical and professional achievement., • Support legacy product lines and resolve new product issues as they arise., • Work across departments to lead vendor or engineering outsource selection decisions based on technical performance, risk and cost tradeoffs., • Take the initiative to investigate and propose new method, process, technique, tool, component, or technology improvements for quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations for capable and talented technical staff to grow an effective Engineering team. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Power Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job Description If you're passionate about the design and function of the built environment, find beauty in and want to protect the natural environment, and want to work with others that feel the same, join our team! LaBella’s multi-disciplinary team of architects, designers, engineers, managers, and environmental scientists work every day to make our world more functional, beautiful, and safe. LaBella is an employee-owned engineering firm of approximately 2,000 staff and growing! We are seeking a highly motivated individual with an entrepreneurial spirit to join a dynamic team working on exciting, multi-phase, technically engaging, and impactful projects. The successful candidate will be responsible for managing NYSDEC Spill projects, Phase II Environmental Site Assessments (ESAs) in support of real estate transactions and managing sites in the NYSDEC Brownfield Cleanup Program (BCP) including Site Characterizations/ Remedial Investigations, Remedial Alternative Analysis/Remedial Design work and remediation projects. Prior experience with assessing feasibility/cost and detailed design for excavation and off-site disposal projects, in-situ chemical injections (oxidant and reductant approaches), sub-slab depressurization systems, and other remedial systems is required. The successful candidate will work with junior engineers, geologists and environmental scientists to design and manage field work including groundwater, soil, soil vapor, and surface water sampling, manage and evaluate field and lab data, supervise contractors and drillers, and support the preparation of reports and conduct review of reports developed by junior staff. This individual will be responsible for cost estimating, proposals, invoicing, and client management. Prior experience with environmental investigations and remediation at E-Designation projects is a plus. This position may have some limited fieldwork at times. LaBella offers excellent training and career advancement opportunities and outstanding benefits. Duties: • Proposal writing, project setup, ensuring staff understand health & safety and project scope details, project execution., • Heavy client communication., • Preparing/reviewing deliverables on time and within budget, including invoicing., • Reviewing and organizing field data in a concise manner., • Data presentation and assessment and report preparation/review., • Training/mentoring junior staff., • Business development., • Maintaining open communication with project team members, the client and regulatory agencies., • Representing the company in a professional manner and in line with firm's core values., • Conducting work to professional standards and following firm's safety and QA/QC policies. Requirements • B.S. degree in Engineering (Chemical or Environmental), Geology or Envi, • NY State Licensed Professional Engineer or Professional Geologist a bonus, • 8-16 years of experience managing Phase II ESAs and Brownfield Cleanup Program projects. Federal experience a bonus., • Ability to work independently and as part of a team, • Ability to work in a fast-paced environmental consulting team environment., • Ability to work within a multi-disciplined group of professionals., • Strong communication skills (active listening, written, and verbal), • Organized with strong attention to detail, • Highly motivated, with excellent client service skills and a positive attitude, • Strong problem-solving skills, • Valid NYS driver’s license, lean driving record, and reliable transportation Salary Range: ($80,000 - $100,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description FLSA STATUS: Salary/Exempt DEPARTMENT: Research and Development SUPERVISOR: Engineering Manager DIRECT REPORTS: No Position Summary Power Connector, LLC is entering a new and exciting phase of growth and opportunity filled with innovative and progressive thinking and strategizing. In December 2021, Power Connector was acquired by the Trexon Global network. With this historic transition comes the need to enhance and grow the company through restructuring, reorganization, modernization, optimization, and business development. We, at Power Connector, are responsible for revolutionizing the company and securing and expanding its global connection. Power Connector's Design Engineer is critical in contributing to the fundamental changes that are transforming Power Connector. This position is instrumental in enhancing and strengthening our design capabilities to enable the growth and development of the business by driving innovation and improvements via New Product Introduction and connector design iterations and enhancements. This position's primary focus is to contribute and execute on the team's strategic plans for design innovation and product line sustainability and expansion. Power Connector's Design Engineer is a dynamic, adaptable, open-minded problem solver with exceptional technical and analytical skills. This position plays a key role in sustaining and enhancing our current capabilities and output through strategic planning and engineering to increase efficiency and productivity in all design engineering disciplines. This position enjoys the inherent challenges of sustaining and growing a business by optimizing engineering processes and introducing new approaches to design in a diverse and dynamic organization. This position has a strong influence on the fundamental principles guiding design structure and functionality and works closely with the General Manager to realize the company's true designing potential. Minimum Qualifications Education: • Bachelor's of Science in engineering or related field Experience: • 3-5 years of experience of design engineering or related field, • 2-5 years of electrical connector design experience Knowledge: • Ability to create 3D Computer-aided design (CAD) models and drawings, • Ability to read drawings, specifications, test procedures, etc., • Fundamental mathematical and physical principles, • Proficient in MS Office, • Geometric Dimensioning and Tolerancing (GD&T) Skills: • Good oral and written communication and presentation skills, • Great interpersonal skills, • Excellent organizational skills, • Results-oriented with strong analytical skills, • Ability to work well independently and part of a team, • Ability to motivate team members in a creative and effective manner, • Ability to work effectively under stressful and dynamic environments Job Responsibilities • Assist with research and development, new product introduction, and production deployment., • Create CAD models, drawings, specification sheets, and prototypes for new and existing products utilizing Solidworks., • Modify existing products to improve efficiency and performance., • Design for manufacturability., • Research materials and production costs to determine manufacturing requirements., • Ensure product designs conform to customer and government specifications., • Test designs to ensure they meet safety, usability, and environmental impact standards., • Analyze data from tests and identify opportunities for improvement., • Collaborate with engineering, sales, procurement, and production teams., • Present designs and prototypes to customers and colleagues., • Create BOMs and routings for new products, legacy products, and engineering changes as necessary., • Develop and manage costing analysis as necessary during product development and deployment., • Create part numbers, assign classification, build product structure and Bill of Materials, generate routings, assign standard labor times, etc. for all levels of components and assemblies in current MRP system., • Manage and participate in product design reviews to provide input on design and manufacturing requirements, functional requirements, capacity, potential failure modes, etc., • Manage projects, including budgets, schedules, and costs when applicable., • Perform DFMEAs, PFMEAs, and Risk Assessments., • Ensure that the company's designs and designing processes comply with all government laws and regulations., • Review and calculate labor, material, and other production costs along with reviewing schedules and future production requirements to assist management in decision making., • Collaborate with quality team to assure products are being produced to applicable specifications., • Evaluate quality control processes and make recommendations for improvements in quality control., • Devise procedures to inspect and report quality issues., • Assure the reliability and consistency of product manufacturing by checking processes and final output., • Facilitate proactive solutions by collecting and analyzing manufacturing data., • Document and optimize design procedures to ensure replicability and compliance with internal and external standards., • Contribute to internally driven and customer-driven Root Cause Corrective Actions and failure analysis., • Assist in the preparation for quality audits., • Any additional tasks necessary to execute on the team's strategy for design sustainability, improvement, and optimization. Other responsibilities, initiatives and ad-hoc projects as required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for prolonged periods of time, working at a computer, stand, bend, twist, and lift up to 25 lbs. The noise level in the work environment is usually low to moderate.

Job Description Position: Sr. Electrical Design Engineer / Project Engineer III Location: Bohemia, New York Overview: We are seeking a highly skilled Electrical Design Engineer with a strong foundation in electrical and power supply concepts, combined with hands-on experience in designing and optimizing power supply systems. The ideal candidate will have a solid theoretical background in electrical engineering, specifically in power supply design, and experience with designing for manufacturing. Key Responsibilities: • Apply a strong theoretical background in Electrical/Power Supply Concepts to design and develop power supply systems that meet the required specifications and standards, • Design for Manufacturing (DFM): Ensure all designs are optimized for ease of manufacturing, considering cost, scalability, and quality control, • Utilize hands-on experience in electrical power supply design to innovate, troubleshoot, and refine power supply products Qualifications: • Bachelor’s degree in electrical engineering or a related field., • 5-10 years of hands-on experience in power supply electrical design, • Thermal system design for power supply, • Knowledge of safety and reliability standards for power conversion devices, • Knowledge in firmware programming a plus, • Knowledgeable in simulation, computation program is a plus, • Manufacturing best practices knowledge is a plus Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance About Phihong Phihong is a global leader in the development of world-class power solutions, with annual revenue of $400+ Million. A leading supplier of power adapters, power supplies, Power-over-Ethernet products, and electric vehicle chargers, Phihong proudly serves OEMs in the medical, datacom, telecom, personal electronics, industrial, and networking markets, and has a truly global reach with design labs, manufacturing facilities, and sales support centers in California, New York, The Netherlands, China, Japan, and Taiwan. Phihong is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. This is a fully onsite position located in Bohemia, NY

Job Description Groundwater & Environmental Services, Inc. (GES), an industry leader with a reputation for excellence in providing environmental consulting, engineering, compliance, and technical field services to clients in diverse market sectors, seeks a Junior to Mid-level. Engineer. This is a position for a detail-oriented, team player with strong communication, analytical, organizational, problem solving, and time management skills. The position will report to a Principal Engineer, and work under the supervision and mentorship of other engineers, project professionals, and field technicians in a collaborative and safety conscience environment. The selected candidate will be integrated into our Northeast Region engineering team working across multiple states in New York and New England. Candidate will work out of the Islandia, NY. Duties and Responsibilities: • Perform groundwater and vapor treatment system engineering calculations, • Perform remediation system and laboratory data tabulation, evaluation, and report preparation, • Completion of materials/equipment/supplies specification and procurement, • Subcontractor scope of work development, coordination, and contracting, • Assist with cost estimates and support proposal efforts, • Preparation of remedial action plans, pilot test workplans, site conceptual model development, • Preparation of permit applications and compliance reports, • Coordination directly with subcontractors, vendors, and laboratories, • Coordinate field tasks associated with operation and maintenance (O&M) of remediation systems (e.g., data collection, system sampling, system cleaning, carbon replacement, etc.), system installation, excavation projects, and remedial injections, • Perform field work including remedial system O&M, pilot testing, remedial in-situ injections, groundwater sampling, collecting environmental and permit compliance samples, soil excavation, contractor oversight for trenching, piping & system installation, • Perform other related duties as assigned, • Travel within the Northeast region to perform field work as necessary, • Coordinate, participate in, and complete Health and Safety related field observations and documentation Skills & Requirements: • A Bachelor's degree or higher in Engineering (Environmental, Chemical, Civil), • 3-5 years of related environmental consulting experience, • Must be resourceful with excellent communication and writing skills and possess a high degree of initiative and time management skills, • Engineer-in-Training (E.I.T.) certification or Professional Engineer registration is a plus, • Stormwater or civil engineering experience is a plus, • Mechanical aptitude and experience with basic hand tools is a plus, • Field work requires wearing personal protection equipment and working outdoors in all seasons Our comprehensive benefits program includes: Hybrid workforce, medical, dental, vision, prescription, 401k, FSA, STD, LTD, New Parent Leave, 529 CollegeBound Fund, Tuition Assistance, Bonus Plan, and more. Groundwater & Environmental Services, Inc. (GES) believes that diversity and inclusion among our staff is critical to our success, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. At GES, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, gender, pregnancy, national origin, age, disability, marital status, sexual orientation, gender identity or expression, military and veteran status, and any other characteristic protected by law.

Job Description Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uP’s and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location – New York (Long Island)

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development, • Vision insurance High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: · Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications · Test, troubleshoot and debug electrical components and systems · Regularly work with power output up to 450 kV and up to 6kW · Work on multiple projects varying in complexity from inception to completion · Analyze equipment to establish operating data and conduct experimental tests · Works with technical personnel to ensure prototype models are assembled according to design specification · Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards · Generate, revise or finalize BOMs · Create and maintain engineering reports · Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service · Participation in the creation of technical documentation, system manuals and customer facing documentation · Follow all VJX and OSHA workplace safety requirements and policies · Safety Sensitive Position Essential Skills: · Bachelor’s Degree in Electrical Engineering · Minimum of 3 years of experience in a manufacturing environment · Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams · Knowledge of analog circuit design · Familiarity with soft switching techniques, schematics capture and PCB layout · Ability to solve complex technical problems with minimal supervision · Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters · Proficient soldering skills · Proficiency in the English language with established written and verbal communication skills · Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics · Proficiency in Outlook, Microsoft Word, Excel and PowerPoint · Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization · Must be legally authorized to work in the US · Will need to successfully pass a drug screening and background check Non-Essential Skills: · Knowledge of CE, UL, or other applicable regulatory guidelines or standards · Basic understanding of an ERP system · Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: · Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment · Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions · Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance · Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment · Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis · Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus · Must be able to fulfill essential job function in a consistent state of alertness and safe manner · May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals.This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive Position Essential Skills: • Bachelor’s Degree or higher in Mechanical Engineering, • A minimum of three (3) years’ experience in a manufacturing environment, • Experience with manufacturing processes and mechanical design, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Experience and proficiency with SolidWorks creating 2D and 3D designs, • Proficient in Microsoft Office Suite, • Legally authorized to work in the US and able to successfully pass a complete background check and drug screening Non-Essential Skills: • Experience in electro-mechanical design, • Experience working with ERP systems (Global Shop Solutions-GSS ERP), • Ability to read and speak Mandarin Chinese Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required., • On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated fairly during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job DescriptionRetlif Testing Laboratories is looking to hire a full-time Environmental Simulation Test Engineer III to join our Ronkonkoma, New York Environmental Simulation Testing Laboratory. Do you have a background in mechanical engineering and want a career, not just a job? This position earns competitive pay, $90,000-$120,000 based on experience. We also offer excellent benefits, including medical, dental, vision, a matching 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you in electrical engineering, consider applying today!ABOUT RETLIF TESTING LABORATORIESAn industry leader for 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients.As a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team.A DAY IN THE LIFE OF A TEST ENGINEERAs an Environmental Simulation Test Engineer III, you play a critical leadership role as a member of our team. You oversee and mentor other technical staff members who are the technical interface with our customers, serving as a technical resource during the performance of contracted testing as well as during our initial sales efforts. You work closely with the customer to develop program specific test procedures. You are involved with the pre-test engineering reviews, test sample preparation, setup, execution of the tests, and the documentation of test results. You regularly interact directly with customers. In order to apply appropriate test standards and provide time and cost/quotations, you provide support to the sales team. You also get to support Engineering in the development of new service offerings. You get great satisfaction from helping our clients succeed by fully addressing their compliance needs!QUALIFICATIONS FOR AN ENVIRONMENTAL SIMULATION TEST ENGINEER IIIBachelor's degree in a relevant field OR equivalent trainingRequired: Minimum of 4 years of industry work experience in the mechanical engineering field of Environmental Simulation Testing.Prior experience with technical preparation of assigned test procedures for both internal and external use.Prior experience in job costing and generation of quotations.Familiarity with the following test standards preferred: MIL-STD – 810, RTCA/DO 160Desired hands-on working experience in vibration and shock testing as well as knowledge of temperature, humidity, sand, and dust testing.Excellent computer skillsAbility to perform multiple tasks and meet strict deadlines in a fast-paced environment.Ability to work independently.Ability to lift 50 pounds, bend, lift, and twist.Position requires obtaining a hearing test.Ability to use Air Purified Respirators (APS) or Powered Air Purified Respirators (PAR) is a prerequisite for any testing that requires respiratory protection.Background that would permit the U.S. Dept. of Defense (DoD) to issue a Secret Clearance, which requires U.S. CitizenshipAre you organized and attentive to detail? Do you have excellent interpersonal skills? Can you effectively prioritize multiple tasks in order to meet strict deadlines? Do you have strong communication skills, both written and verbal? Can you work well independently? Do you thrive in a fast-paced environment? If so, you might just be perfect for this Test Engineer position!WORK SCHEDULEThis full-time Test Engineer job is Monday - Friday, 8:00 AM - 4:30 PM. Additional hours may be necessary at times, depending on customer needs.READY TO JOIN OUR TEAM?We understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you are right for this Environmental Simulation Test Engineer III job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

Job Description MECHANCIAL ENGINEER ABOUT BBS BBS is a NY-based, ENR New York Top 100 design firm that continually strives for excellence in providing integrated architectural, landscape architectural and M/E/P engineering solutions to help our clients successfully plan, design, and build their projects. BBS is a multi-disciplined firm with a wide range of in-house consulting services. We have successfully delivered building and site projects for clients, predominantly within K-12/higher educational sector, for over 50 years. With 75% of our valued staff being employed at BBS for over 10 years, and many for over 20 years, our vision is long term and it includes the most talented individuals in the industry. At BBS you will contribute to a wide range of projects that help our clients understand the challenges placed before them today while connecting them to the future. We support a workplace culture that encourages innovation, creativity, and camaraderie. WHO ARE WE LOOKING FOR? BBS is currently seeking a Mechanical Engineer for the firm’s Patchogue office. This position requires a minimum of 3 years of experience in the design and direct production of projects of varying types, complexities, scopes and budgets. Previous public-sector experience is preferred. Candidates should be dedicated self-starters able to work independently when necessary and also have experience working on teams with other professionals, including senior and project level architects and engineers, project managers, and technical designers. He or she should also have a dedication to the profession with a strong, self-motivated desire to learn and progress. DUTIES AND RESPONSIBILITIES: • Pro-actively contributes to projects from conceptual design through construction closeout, multiple at one time, under supervision of a Senior Mechanical Engineer/Project Manager., • Understands and designs building engineering systems, i.e. building HVAC, heating plant, piping and plumbing systems., • Produces construction documents and technical specifications for public bidding. Follows production schedules and is able to meet multiple simultaneous deadlines., • Works well with in-house design teams of other project architects and engineers, designers, technicians and outside consultants, and works well with Construction Managers and client representatives., • Meets quality control requirements, cost budgets, and time deadlines as necessary to ensure highest level of client satisfaction. SKILLS AND EXPERIENCE: • Bachelor of Mechanical Engineering degree or equivalent., • Professional license or Engineer in Training Program (EIT)., • Strong design and technical skills. Understands and contributes to the process and workflow of an A/E project design team, works within established cost budgets and timelines., • Excellent verbal, written and visual communication skills. Self-driven desire to learn and grow professionally, independence, ability to multi-task and to meet multiple simultaneous deadlines, client interaction and presentations., • High-level of proficiency in AutoCAD, Revit, and MS Office., • Preference may be given to a candidate with strong K-12/higher education experience. BENEFITS INCLUDE: • Comprehensive, competitive compensation package, commensurate with candidate's experience, • Group health, dental and vision insurance, • Health and Dependent Care FSAs available, • Company-paid group life insurance., • Supplemental life, spousal and dependent life and AFLAC plans available., • 401k retirement plan, • Company-paid vacation and sick/personal time., • Professional development program, professional licensing/certifications reimbursement. Submit your resume to Frederick Seeba, PE via email at seeba@bbsarch.com. BBS is an Equal Opportunity Employer. All qualified applicants are encouraged to apply and will be considered without regard to age, race, creed, color, national origin, ancestry, martial status, affectional or sexual orientation, gender identity or expression, disability, nationality or sex.

Retlif Testing Laboratories is looking to hire a full-time Environmental Simulation Test Engineer III to join our Ronkonkoma, New York Environmental Simulation Testing Laboratory. Do you have a background in mechanical engineering and want a career, not just a job? This position earns competitive pay, $90,000-$120,000 based on experience. We also offer excellent benefits, including medical, dental, vision, a matching 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you in electrical engineering, consider applying today!\n \n ABOUT RETLIF TESTING LABORATORIES\n \n \nAn industry leader for 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients.\n \n \nAs a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team.\n \n A DAY IN THE LIFE OF A TEST ENGINEER\n \n \nAs an Environmental Simulation Test Engineer III, you play a critical leadership role as a member of our team. You oversee and mentor other technical staff members who are the technical interface with our customers, serving as a technical resource during the performance of contracted testing as well as during our initial sales efforts. You work closely with the customer to develop program specific test procedures. You are involved with the pre-test engineering reviews, test sample preparation, setup, execution of the tests, and the documentation of test results. You regularly interact directly with customers. In order to apply appropriate test standards and provide time and cost/quotations, you provide support to the sales team. You also get to support Engineering in the development of new service offerings. You get great satisfaction from helping our clients succeed by fully addressing their compliance needs!\n \n QUALIFICATIONS FOR AN ENVIRONMENTAL SIMULATION TEST ENGINEER III\n \n\n • Bachelor's degree in a relevant field OR equivalent training\n, • Required: Minimum of 4 years of industry work experience in the mechanical engineering field of Environmental Simulation Testing.\n, • Prior experience with technical preparation of assigned test procedures for both internal and external use.\n, • Prior experience in job costing and generation of quotations.\n, • Familiarity with the following test standards preferred: MIL-STD - 810, RTCA/DO 160\n, • Desired hands-on working experience in vibration and shock testing as well as knowledge of temperature, humidity, sand, and dust testing.\n, • Excellent computer skills\n, • Ability to perform multiple tasks and meet strict deadlines in a fast-paced environment.\n, • Ability to work independently.\n, • Ability to lift 50 pounds, bend, lift, and twist.\n, • Position requires obtaining a hearing test.\n, • Ability to use Air Purified Respirators (APS) or Powered Air Purified Respirators (PAR) is a prerequisite for any testing that requires respiratory protection.\n, • Background that would permit the U.S. Dept. of Defense (DoD) to issue a Secret Clearance, which requires U.S. Citizenship\n\n \nAre you organized and attentive to detail? Do you have excellent interpersonal skills? Can you effectively prioritize multiple tasks in order to meet strict deadlines? Do you have strong communication skills, both written and verbal? Can you work well independently? Do you thrive in a fast-paced environment? If so, you might just be perfect for this Test Engineer position!\n \n WORK SCHEDULE\n \n \nThis full-time Test Engineer job is Monday - Friday, 8:00 AM - 4:30 PM. Additional hours may be necessary at times, depending on customer needs.\n \n READY TO JOIN OUR TEAM?\n \n \nWe understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you are right for this Environmental Simulation Test Engineer III job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you!

Overview: \n At Zebra, we are a community of innovators who come together to create new ways of working. United by curiosity and a culture of caring, we develop smart solutions that anticipate our customer’s and partner’s needs and solve their challenges. \n \n Being part of Zebra Nation means you are seen, heard, valued, and respected. Drawing from our unique perspectives, we collaborate to deliver on our purpose. Here you are part of a team pushing boundaries today to redefine the work of tomorrow for organizations, their employees, and those they serve. \n \n You’ll have opportunities to learn and lead in a forward-thinking environment, defining your path to a fulfilling career while channeling your skills toward causes you care about—locally and globally. \n \n Come make an impact every day at Zebra. \n \n What We're Looking For: The Advanced Data Capture (ADC) group designs, develops and brings to market the highest quality and performance imaging-based readers for use in retail, warehouse, and factory applications. The Electrical Engineer II is an important part of a highly collaborative team helping to innovate and release those world class products while learning and growing in their career.\n \n \nThis role requires a minimum of 3-days per week in our Holtsville, NY (Long Island) office, 2 days remote (US).\n\n • Works as part of a larger team lead by more senior engineers to design, develop and test new data capture products\n, • Collaborates closely with a multidisciplinary team including Electrical, Software, Mechanical, Optical and Manufacturing Engineers\n, • Occasionally interfaces with external partners, vendors and customers\n, • Reviews test results and performs root cause analyses to identify problems\n, • Runs tests designed by more experienced engineers.\n, • Seeks out new tools to analyze and solve problems.\n, • Responsible for circuit development and schematic entry\n, • Performs electrical component selection\n, • Creates and tests prototypes at the component or circuit level to verify they meet design requirements\n, • Uses common electrical test equipment such as Oscilloscopes, Digital Multi-meters, Power Supplies, Frequency Generators, Logic analyzers, etc.\n, • Directs and works with technicians to perform testing\n, • Documents test requirements and results to ISO 9000 standards\n, • Makes and implements recommendations to immediate team to enhance performance and improve productivity.\n, • Builds productive working relationships internally and externally.\n, • Makes changes to or upgrades existing electrical designs. Enhances and improves existing technologies to apply to new solutions.\n\n Minimum Qualifications: \n\n • Bachelor’s degree and Minimum 2+ years of experience (in Engineering or related technical field) \n OR Master's degree with Minimum 1+ year of experience\n\n, • Electronic Hardware Design Experience\n, • Experience with common electrical test equipment such as Oscilloscopes, Digital Multi-meters, Power Supplies, etc.\n\n \n Preferred Qualifications: \n\n • Cadence experience a plus\n, • Solid understanding of electronics fundamentals\n, • Knowledge of, or experience with embedded systems a plus\n, • Ability to understand Embedded Software\n, • Schematic entry and simulation experience\n, • Familiarity with fundamentals of PCB layout\n, • Demonstrated examples as a team player with ability to navigate organizational boundaries\n, • Strong verbal and written communication skills with a high attention to detail\n, • Ability to communicate technical details or issues clearly and succinctly\n\n \n Zebra is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability, protected veteran status, or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. \n \n Know Your Rights: \n https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf \n \n Conozca sus Derechos: \n https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf \n \n We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. \n \n Zebra is a federal contractor and is committed to an alcohol and drug free workplace. As a result, all U.S. based employees are subject to the Drug and Alcohol Free Workplace Policy and Procedure. \n \n \n \n Equal Opportunity Employer: \n Zebra is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability and protected veteran status, or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. \n \n Know Your Rights: \n https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf \n \n Conozca sus Derechos: \n https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf \n \n We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at workplace.accommodations@zebra.com . \n \n Pay Range: $76,640.00 - $114,960.00 Annual\n \n Incentive Compensation: In addition to base pay, Zebra offers this role the opportunity to earn a performance-based annual cash incentive, at a target equal to 10% of base pay, in accordance with the terms of the applicable incentive plan.\n \n \n Zebra Total Rewards: \n Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive – including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. \n \n Salary offered will vary depending on your location, job-related skills, knowledge, and experience. \n \n Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. \n \n Benefits: \n We understand the importance of work-life balance and wellbeing, which is why we offer flexibility for our teams including: hybrid work, adaptable hours, Summer Flex Fridays, Focus Fridays, and an annual companywide well-being day to promote revitalization and success. \n \n Job Posting Statement: \n To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department. \n \n AI Technology Statement: \n Zebra Technologies leverages AI technology to evaluate job applications using objective, job-relevant criteria. This approach enhances efficiency and promotes fairness in the hiring process. However, every decision regarding interviews and hiring is made by our dedicated team, because we believe people make the best decisions about people. For more on how we use technology in hiring and how we process applicant data, see our Zebra Privacy Policy.

Overview: \n At Zebra, we are a community of innovators who come together to create new ways of working. United by curiosity and a culture of caring, we develop smart solutions that anticipate our customer’s and partner’s needs and solve their challenges. \n Being part of Zebra Nation means you are seen, heard, valued, and respected. Drawing from our unique perspectives, we collaborate to deliver on our purpose. Here you are part of a team pushing boundaries today to redefine the work of tomorrow for organizations, their employees, and those they serve. \n \n You’ll have opportunities to learn and lead in a forward-thinking environment, defining your path to a fulfilling career while channeling your skills toward causes you care about—locally and globally. \n \n Come make an impact every day at Zebra. \n \n What We're Looking For: The Senior Electrical Design Engineer will be responsible to develop, maintain and test Electronic circuits used in our existing and new RFID products. The engineer will be responsible for developing products from concept phase to production release. A key responsibility of this senior role is also to proactively investigate, learn, and implement Artificial Intelligence (AI) solutions to innovate our engineering processes and drive significant gains in efficiency. \n \n \nThis role is a hybrid position and requires a minimum of three days per week in our Holtsville, NY or Germantown, MD office. Zebra reserves the right to modify your work location based on business need.\n\n • Establishes requirements for moderately complex Electrical design projects.\n, • Completes all phases of moderately complex Electrical design projects including system design/Power Supply analysis, circuit design, thermal analysis, simulation, schematic, layout and Electrical circuit validation.\n, • Proactively research, evaluate, and implement emerging Artificial Intelligence (AI) and Machine Learning (ML) techniques to continuously improve EE design, testing, and system optimization processes\n, • Performs EE analysis and simulation for design, optimization and debug\n, • Generates schematics using Cadence Allegro schematic capture and supports PCB layout.\n, • Drives and/or Supports customer and cross-functional issue debug for system level issues\n, • Drives EMI/EMC trouble shooting and validation at product level.\n, • Works with internal cross-functional teams and external JDMs/CMs to successfully bring Handheld products to market\n, • Drives EE lab capability development and works with Lab team on test strategy and new technology capability\n, • Works cross-functionally with RF, Antenna, Mechanical engineering, SW engineering and System Test on system design, test plan development and issue debug\n, • Applies existing technology in new ways to improve performance and productivity\n, • Consider latest technologies and new approaches to improve designs and implementation of the design.\n, • Reviews changes or upgrades to existing applications\n, • May develop new tools and processes to aid in the analysis and solving of problems as well as efficiency improvement\n, • Prioritizes quality and seeks out improvements in all aspects of EE projects\n\n \n Minimum Qualifications: \n\n • Bachelors degree in Electrical Engineering and 4+ year experience or Masters degree in Electrical Engineering and 2+ year experience\n, • Experience in Analog and Digital circuit design, memory design and signal integrity\n, • Experience with generating schematics using Cadence Allegro (or similar software) schematic capture and supports PCB layout.\n, • Experience working with internal cross-functional teams and external JDMs/CMs to successfully bring RFID products to market.\n\n Preferred Qualifications: \n\n • Experience working with embedded microprocessors/Microcontrollers such as ST Micro STM32H750 type devices and associated SDRAM and Flash Memory\n, • WIFI, Bluetooth, RF experience a plus\n, • Experienced with PSPICE and familiar with FPGA and using C, VHDL/Verilog\n, • Experienced with or willing to learn basic RF, Compliance requirements and mitigation of EMI, ESD, Immunity issues.\n, • Knowledgeable about USB, Ethernet, serial interfaces, audio and video interfaces\n\n \n Equal Opportunity Employer: \n Zebra is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability and protected veteran status, or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. \n \n Know Your Rights: \n https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf \n \n Conozca sus Derechos: \n https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf \n \n We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at workplace.accommodations@zebra.com . \n \n Pay Range: $96,800.00 - $145,200.00 Annual\n \n Incentive Compensation: In addition to base pay, Zebra offers this role the opportunity to earn a performance-based annual cash incentive, at a target equal to 10% of base pay, in accordance with the terms of the applicable incentive plan.\n \n \n Zebra Total Rewards: \n Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive – including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. \n \n Salary offered will vary depending on your location, job-related skills, knowledge, and experience. \n \n Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. \n \n Benefits: \n We understand the importance of work-life balance and wellbeing, which is why we offer flexibility for our teams including: hybrid work, adaptable hours, Summer Flex Fridays, Focus Fridays, and an annual companywide well-being day to promote revitalization and success. \n \n Job Posting Statement: \n To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department. \n \n AI Technology Statement: \n Zebra Technologies leverages AI technology to evaluate job applications using objective, job-relevant criteria. This approach enhances efficiency and promotes fairness in the hiring process. However, every decision regarding interviews and hiring is made by our dedicated team, because we believe people make the best decisions about people. For more on how we use technology in hiring and how we process applicant data, see our Zebra Privacy Policy.

Overview: \n At Zebra, we are a community of innovators who come together to create new ways of working. United by curiosity and a culture of caring, we develop smart solutions that anticipate our customer’s and partner’s needs and solve their challenges. \n \n Being part of Zebra Nation means you are seen, heard, valued, and respected. Drawing from our unique perspectives, we collaborate to deliver on our purpose. Here you are part of a team pushing boundaries today to redefine the work of tomorrow for organizations, their employees, and those they serve. \n \n You’ll have opportunities to learn and lead in a forward-thinking environment, defining your path to a fulfilling career while channeling your skills toward causes you care about—locally and globally. \n \n Come make an impact every day at Zebra. \n \n What We're Looking For: With over 100 global offices in 45 countries, we offer ample opportunities for growth and development. Our RFID products offer the most comprehensive range of innovative RFID technology solutions in the market. We enable organizations to identify, track, manage, and optimize the deployment of critical assets, thus improving business efficiency. Our team caters to every environment – from the carpeted office space to the retail sales floor, the warehouse, the production line, and even the dock doors. We provide business and industrial lines of fixed, handheld, and hands-free RFID readers to meet diverse needs. By joining us, you'll be contributing to the leading-edge RFID technology Zebra brings to the world. This is your chance to be part of a fast-growing company that is revolutionizing the industry. Come, capture your edge with us!\n \n \nAs a Senior Hardware Electrical Engineer, you'll bring your designs from concept to production, shaping the future of our cutting-edge products. Utilize your experience with embedded microprocessors, microcontroller-based systems, and high-speed printed circuit design in a meaningful way. You'll also lead the design and testing of digital and analog control systems for RFID and various other products, ensuring optimal performance. Join us and leave your mark on this industry-leading company, while developing your skills and shaping the future of RFID technology.\n \n \n \n \nLocation- *Role is required to be onsite in Holtsville, NY office (Hybrid- Minimum of 3 days in the office per week).\n \n Responsibilities: \n\n • Completes documentation and procedures for installation and maintenance\n, • May interact with users to define system requirements and/or necessary modifications\n, • Analyze designs to designate necessary equipment to collect data\n, • Evaluate and synthesize experimental tests and their results\n, • Read and design plans to build electrical systems on a variety of products and machinery\n, • Focus on manipulation and usage of electricity within a function of an engineered process\n, • Exercises judgment in selecting methods and techniques for obtaining solutions\n\n \n Qualifications: \n Minimum Qualifications: \n \n\n • Bachelor’s degree required\n, • 4+ years of relevant experience\n\n\n \n, • Experience in embedded system design & hardware development\n \n\n\n \n, • Experienced in DSP/ARM based hardware development, integration, and testing\n \n\n\n, • Experience in design of digital and analog systems and various other products\n\n\n \n, • Strong hardware and system knowledge\n \n\n\n \n, • Schematic capture layout in high-speed interfaces and RF experience required. \n \n\n Preferred Qualifications: \n\n \n • Master’s degree preferred\n \n\n\n, • Skilled in C, C++, and python\n, • Proven record of successful project contributions\n, • Strong participation in architecture and platform development\n, • Manufacturing and cross-functional team interaction and support for project completion\n, • Regulatory testing for non-RF requirements, debug and standards support.\n, • Basic knowledge in wireless communications\n, • Strong hardware and system knowledge\n, • Strong team player and communicator\n, • Broad knowledge of modern digital systems\n, • Experience with the constraints imposed by battery operated systems\n, • Experience with a variety of common digital interfaces at the PHY level, including RS232, USB, I2C, SPI, Ethernet, SDIO, etc.\n, • Expert in the use of test equipment, such as oscilloscopes, logic analyzers, etc.\n, • Working knowledge of PCB schematic capture - Cadence knowledge is a plus\n, • Research and Development experience\n, • Publications, patents\n\n \n Location- *Role is required to be onsite in Holtsville, NY office-preferred location (Hybrid- Minimum of 3 days in the office per week). \n \n \n \n Equal Opportunity Employer: \n Zebra is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability and protected veteran status, or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. \n \n Know Your Rights: \n https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf \n \n Conozca sus Derechos: \n https://www.eeoc.gov/sites/default/files/2022-10/22-088EEOCKnowYourRightsSp1020.pdf \n \n We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at workplace.accommodations@zebra.com . \n \n Pay Range: $96,800.00 - $145,200.00 Annual\n \n Incentive Compensation: In addition to base pay, Zebra offers this role the opportunity to earn a performance-based annual cash incentive, at a target equal to 10% of base pay, in accordance with the terms of the applicable incentive plan.\n \n \n Zebra Total Rewards: \n Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive – including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. \n \n Salary offered will vary depending on your location, job-related skills, knowledge, and experience. \n \n Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. \n \n Benefits: \n We understand the importance of work-life balance and wellbeing, which is why we offer flexibility for our teams including: hybrid work, adaptable hours, Summer Flex Fridays, Focus Fridays, and an annual companywide well-being day to promote revitalization and success. \n \n Job Posting Statement: \n To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department. \n \n AI Technology Statement: \n Zebra Technologies leverages AI technology to evaluate job applications using objective, job-relevant criteria. This approach enhances efficiency and promotes fairness in the hiring process. However, every decision regarding interviews and hiring is made by our dedicated team, because we believe people make the best decisions about people. For more on how we use technology in hiring and how we process applicant data, see our Zebra Privacy Policy.

Job DescriptionDescription: As an Evening Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. Weekends are a must, schedule is Friday through Tuesday, 3pm-11pm. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.