Trabajos diesel en Union City, New JerseyCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred., • Familiarity with computerized fleet maintenance and parts inventory systems preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $35.00/Hr.

_ Join Our Community of Food People! BASIC PURPOSE To provide a safe and reliable fleet by performing preventative maintenance and proper repairs on all fleet equipment. COME WORK FOR US FOODS®! Ready to build a career with a company that’s leading the foodservice industry? We help YOU make it! US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Schedule: Sunday - Thursday Nights 3:00 PM - 11:30 PM OT Available, not required Pay range is $39 - $42 hourly based on certifications and experience. Excellent Benefits starting DAY ONE! Including: $250 Quarterly tool allowance, that's $1,000 extra per year! Low-cost Medical, Dental, and Vision for Family Coverage. Paid vacation time, sick, and personal time. Employee uniforms provided. Employee referral program. $1,000 per referral 401K with FANTASTIC company match! Strong Safety Culture, newer equipment, and excellent local leadership and great place to work! Basic Purpose: Independently troubleshoot, diagnose, rebuild, replace and complete all required repairs on diesel equipment (i.e., tractors, trailers, bobtails, reefers, lift gates, etc.). ESSENTIAL DUTIES AND RESPONSIBILITIES Perform preventative maintenance within company standards. Complete documentation of all repair orders, PM list and parts accountability. Handle road service calls; perform road rescue/transport equipment as needed. Keep track of assigned repairs by logging in and out of the software system. Maintain a clean and safe work environment in compliance with workplace safety rules and regulations and government guidelines. Maintain inventory and proper recordkeeping. Backup to other maintenance shop personnel. Willingness and capacity to assume increased responsibility and Certifications. Performs other duties as assigned. MINIMUM QUALIFICATIONS: Must have 5 years of verifiable hands-on experience as a heavy-duty commercial diesel mechanic. Diagnostic and troubleshooting ability using fleet maintenance software. Successfully demonstrated independent analytical and problem-solving skills. Must furnish own personal hand tools. Ability to comply with EPA and OSHA regulations pertaining to the shop and fleet. Ability to read and understand technical and service manuals. Excellent communication skills; able to communicate with co-workers and drivers with demonstrated teamwork skills. Ability to manage multiple functions simultaneously in a fast-paced environment with minimal supervision. Ability to adapt to changing organizational and operational needs. Computer and software experience. High school diploma or equivalent required. Must possess a valid driver's license. PREFERRED QUALIFICATIONS: JPRO software experience. Welding ability Knowledge with electrical schematics Basic Microsoft Excel and Word skills. Leadership experience or qualifications Valid Class A CDL license and DOT certification EPA 608 (Type 2 or Universal) certification Physical Requirements: JOB REQUIRES WORKER TO: 1. SIT Occasionally 2. STAND Frequently 3. WALK Frequently 4. DRIVE Occasionally (Test drives equipment) TO LIFT: 1. 1-10 lbs (Sedentary) Continuously 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) May lift up to 120-150 pounds (2 man lift) TO CARRY: 1. 1-10 lbs (Sedentary) Frequently 2. 10-20 lbs (Light) Frequently 3. 25-50 lbs (Medium) Occasionally 4. 50-100 lbs (Heavy) Occasionally 5. Over 100 lbs (Very Heavy) Occasionally 1. Push/pull Occasionally Item: transmissions, tires & clutches 2. Climb/balance Occasionally Item: ladders & lift gates 3. Stoop/squat Frequently 4. Kneel/bend Occasionally 5. Bend Frequently 6. Reach above shoulder Occasionally 7. Grasp objects Frequently Type: 8. Manipulate objects Frequently type: 9. Twisting Occasionally 1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift) 2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs) 3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel) 4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps) 5 (Manual Dexterity: Typing, use of office machines such as copiers, printers) Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law (for example: state minimum wage thresholds). The expected base rate for this role is between $39 and $42. This role may also receive overtime compensation and shift differential where applicable. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: _. #LI-ED1 *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Automotive Technician A / B Level - $70K-$110K+ - No Weekends \n Location: Bronx, New York Schedule: Monday-Friday | 7:00 AM-5:00 PM | No Weekends Salary: $70,000-$110,000+ based on experience Pay Type: Salary Earning Potential: $110,000+ \n Who are we? \n We are seeking an experienced Automotive Technician in Bronx, New York who can independently complete repairs and handle check engine light diagnostics. This position offers $70,000-$110,000+ annually with a Monday-Friday schedule and no weekends. The shop services cars, fleet vehicles, and light-duty diesel trucks under 18,000 pounds and needs a productive technician who can help move a strong workload through the shop. \n Key Responsibilities \n\n • Diagnose check engine lights and other vehicle concerns.\n, • Perform automotive diagnostics and identify needed repairs.\n, • Complete mechanical repairs efficiently and accurately.\n, • Service and repair cars, fleet vehicles, and light-duty diesel trucks under 18,000 pounds.\n, • Perform vehicle programming as needed.\n, • Use diagnostic equipment and scan tools to troubleshoot vehicle concerns.\n, • Communicate repair findings and needed parts or services clearly to the team.\n, • Work independently on assigned repairs while collaborating with experienced team members when additional support is needed.\n\n Qualifications \n\n • Strong hands-on automotive repair experience with the ability to complete repair work independently.\n, • Experience diagnosing check engine light concerns.\n, • Ability to use automotive diagnostic equipment and scan tools.\n, • Experience with vehicle programming.\n, • Experience servicing cars and light-duty diesel trucks.\n, • Ability to identify needed repairs and communicate findings clearly.\n, • NY State / Safety Inspection License required.\n\n Compensation & Benefits \n\n • Salary ranging from $70,000-$110,000+, based on experience.\n, • Annual earning potential of $110,000+.\n, • Medical benefits.\n, • Paid Time Off.\n, • Paid sick time after one year.\n, • Six paid holidays annually.\n, • Paid training and certification reimbursement upon successful completion.\n, • Shop-paid ATTS technical training courses.\n, • 401(k) with employer match up to 2%.\n, • Uniforms provided and professionally laundered.\n\n Why Work Here \n This long-established independent repair facility offers steady repair volume and needs an experienced technician who can help get work completed and out the door. The shop services a varied mix of cars, fleet vehicles, and light-duty diesel trucks, giving technicians exposure to a broad range of repair and diagnostic work. You'll also have experienced team members available for support, along with ongoing technical training and a Monday-Friday schedule with no weekends. \n Apply today to learn more about this Automotive Technician opportunity and connect with Promotive to discuss whether the position matches your experience and career goals. \n Additional Requirements \n Some positions may require a valid driver’s license, motor vehicle record review, background screening, drug or alcohol screening, or other job-related pre-employment requirements based on the duties of the position, the client’s lawful requirements, and applicable law. Any screening will be conducted at the legally permitted stage and in accordance with applicable federal, state, and local law. Qualified applicants, including applicants with criminal histories, will be considered in accordance with the New York City Fair Chance Act and other applicable law.

Job Description Job Title: Heavy Duty Diesel Technician/Mechanic Location: NEWARK, NJ Company: Global Truck Repair Job Type: Full-Time Salary: Based on Experience & knowledge About Us: At Global Truck Repair, we understand the critical role that trucks play in the success of your business. That's why our team of highly skilled and experienced mechanics specializes in heavy-duty diesel repairs, ensuring that your fleet operates at its peak performance. Whether it's engine diagnostics, transmission repairs, brake services, or general maintenance, we have the knowledge and tools to handle all your truck repair needs.. We are currently seeking an experienced and motivated Truck Mechanic to join our team and help keep our customers satisfied. Job Description: As a Heavy Duty Diesel Mechanic at Global Truck Repair, you will be responsible for performing routine maintenance and repairs on a variety of trucks and trailers. Your role will involve diagnosing mechanical issues, conducting preventive maintenance, and ensuring all trucks comply with safety and operational standards. Key Responsibilities: • Perform regular maintenance and repairs on diesel trucks and trailers., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues., • Conduct safety inspections and ensure vehicles meet compliance standards., • Replace or repair faulty parts and components., • Maintain accurate records of repairs and maintenance., • Work with diagnostic tools and software to identify issues., • Ensure that all work is completed in a timely and efficient manner. Qualifications: • Certification from an accredited automotive or diesel mechanic program (preferred)., • ASE certification or equivalent experience is a plus., • Proven experience as a truck mechanic with a strong understanding of diesel engines and heavy-duty vehicles., • Ability to use diagnostic tools and equipment effectively., • Strong problem-solving skills and attention to detail., • Excellent communication skills and ability to work independently or as part of a team., • English/ Spanish speakers encouraged Equal Opportunity Employer: Global Truck Repair is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description We're not just hiring a mechanic — we're hiring someone who wants to own the shop. Metro Ambulance is a fast-moving EMS operation in North Jersey. Our fleet keeps people safe every single day. We need someone who takes that seriously, stays organized, and is hungry to grow into a lead role. If you're the type who likes things done right the first time and can't stand a messy bay — keep reading. The Opportunity This is a ground-floor role with real upward potential. You'll start by mastering our fleet — gas and diesel rigs, preventive maintenance, inspections, and repairs. As you learn our operation and prove your reliability, you'll take on more responsibility, more authority, and more pay. We want someone who's eager to grow fast and eventually run this shop. If you show up organized, skilled, and ready to work — we'll invest in you. What You'll Do Every Day • Preventive maintenance and inspection across our full fleet, including:, • Change engine oil & filters, • Check braking & suspension systems, • Inspect fuel & cooling systems, • Check transmission fluid & engine mounts, • Drive shaft, CV joints, belts & hoses, • Perform regular tune-ups, • Inspect electrical systems, • Rotate & inspect tires, wheels, rims, • Examine exhaust & undercarriage, • Check all lights, frame & body, • Inspect glass, mirrors & wipers, • Verify seat belts, horn & auxiliary systems, • Repair fluid leaks, • Maintain accurate maintenance logs Who We're Looking For • Experienced with gas AND diesel engines — 6.0 a strong plus, • Organized. Seriously organized. A messy bay is a dealbreaker., • Safe, responsible, and takes ownership of their work, • Hungry to learn, grow, and take on more responsibility over time, • ASE certification is a plus — not required if your skills speak for themselves, • Valid NJ driver's license and reliable transportation to Nutley, NJ, • Ability to maneuver up to 150 lbs with provided equipment, • At least 1 year of hands-on mechanic experience Schedule • Full-Time Monday – Friday; Afternoon Preferred with Weekend availability required — all vehicles are available to service on Saturdays and Sundays, • Overtime and on-call availability are part of the role as needed Compensation & Benefits • $20.00 – $25.00/hr based on experience — with room to grow as you do, • Health insurance (full-time employees, waiting period may apply), • 401(k), • A real path to shop lead — not just a title, a role with authority and pay to match

Job Description We are looking for a Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Yellow Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Operate yellow equip to move into position for repair Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment\nCompany Description Solid Waste Transfer Station visit www.Lemcortransfer.com for more information Solid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description DUTIES & RESPONSIBILITIES Diagnose and troubleshoot problems with engines and equipment Carry out service and repairs on outboard, inboard, and vessel engines Test the performance of engines and electrical systems Conduct general routine maintenance of vessels Complete service records and repair documents QUALIFICATIONS & SKILLS Must have experience as a Marine Diesel Mechanic Degree in mechanical engineering a plus Minimum 5 years mechanic work experience Must be able to work on land and at sea Must be able to obtain a TWIC Card \nCompany Description Providing First-Class Marine Service Since 1977. Miller's Launch and its affiliated companies Miller Marine, Miller's Tug and Barge and Miller's Towing and Salvage are marine support companies with local offices on the East Coast and the Gulf Coast. Our Local knowledge helps us provide the best marine support that our customers have come to depend on. Providing First-Class Marine Service Since 1977.\r\n\r\nMiller's Launch and its affiliated companies Miller Marine, Miller's Tug and Barge and Miller's Towing and Salvage are marine support companies with local offices on the East Coast and the Gulf Coast. Our Local knowledge helps us provide the best marine support that our customers have come to depend on.

Job Description Are you an experienced medium/heavy truck technician looking for a new and exciting challenge? Are you seen as the "Go To" when your coworkers, family, or friends have questions regarding anything diesel? Do you ever ask yourself "I wish I had the opportunity to be a leader"? If so, we have an exciting opportunity for you to become an Instructor at Universal Technical Institute! Never taught? No problem! If you have the drive, patience, and skills we'll train you! You’ve come this far to become an amazing technician…why don’t you take the next step to make that happen for the next generation of technicians. Nothing is more rewarding than seeing the student you taught succeed, knowing you were the one that made it happen! Position Overview: As a Diesel Instructor, you'll play a pivotal role in shaping the minds and skills of our students. Your expertise in diesel engines, diagnostics, and repair will be the guiding light that leads them to a promising career in many different industries. We believe that hands-on learning is the key to success, so get ready to dive into the world of interactive teaching and inspire the next generation to conquer the challenges of modern diesel technology. What We Offer: • $36 - $40 per hour with opportunity for OT, • Weekends OFF, • Paid Training, • FREE Tuition for you AND your Immediate Family, • Medical/Dental/Vision/Life Ins/STD & LTD Ins, • 401K, Paid Holidays, Paid Time Off, • State of the Art Tools and EquipmentResponsibilities, • Inspire and Educate:Create an engaging and inclusive learning environment where students can flourish, fostering their passion for diesel mechanics while imparting your expert knowledge., • Hands-On Training:Lead by example and provide practical demonstrations, ensuring students gain real-world experience in diagnosing, maintaining, and repairing diesel engines., • Curriculum Development: Collaborate with our education team to enhance existing courses and develop new ones that align with industry trends and advancements., • Mentorship:Guide and mentor students on their individual projects, encouraging them to think critically and find innovative solutions., • Safety First:Instill the importance of safety procedures and best practices to ensure a secure working environment for students.Qualifications, • High school diploma or GED, • Experience:4 years of practical work experience, within the last 10 years in the field, • Certifications:ASEs are highly valued!, • Communication Skills:Strong communication and interpersonal skills, enabling you to effectively connect with students and fellow staff, • Patience and Empathy:A patient and empathetic approach to teaching, understanding that every student learns at their own pace About Us: It’s all about the reputation. 55+ years of experience, trusted by 35+ industry leading brands, 16 campuses, 5 technical schools. But it’s not all about the numbers. Here at Universal Technical Institute and its family of schools, we care about YOU. We care about making a change in the lives of our employees and our students. We’re on a mission to expand our reach and increase our impact, one life at a time and that starts with yours…Come and be a part of our legacy! You should be proficient in: • Electrical Systems Diagnostics & Repair, • Diesel Engine Systems, • Transmission & Drivetrain Systems, • ASE Automobile and Light Truck Certification Tests, • Engine Performance, • Service, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment)

Job Description As a Diesel Truck Mechanic specializing in heavy-duty trucks, you will join a small team dedicated to maintaining and repairing Freightliner, Mack, and International vehicles. This role focuses on ensuring optimal engine performance, brake system reliability, and overall vehicle safety, with limited customer interaction. Proficiency in diagnostics and preventive maintenance is essential to support operational efficiency in a fast-paced environment requiring flexibility in scheduling. Responsibilities • Perform diesel engine repair and routine maintenance on heavy-duty trucks, • Conduct diagnostics and troubleshooting using Jaltest software and other tools, • Replace parts and repair hydraulic hoses as needed, • Test and maintain drum and disc brake systems, including DEF system maintenance, • Execute preventive maintenance to avoid breakdowns and ensure vehicle safety, • Document maintenance and repair activities accurately, • Collaborate effectively within a small team of 2-5 mechanics Required Qualifications • Minimum 2 years of experience in diesel truck mechanics, • Strong knowledge of diesel engine repair and hydraulic systems, • Proficiency in brake system maintenance, including drum and disc brakes, • Skilled in preventive maintenance and problem-solving, • High attention to detail and ability to manage time efficiently, • Flexibility to work nights and weekends as needed Preferred Qualifications • Technical Certificate in Diesel Mechanics, • Commercial Driver's License (CDL)\nCompany Description Leading energy infrastructure company providing fuels that keeps the the "city that never sleeps" running. Leading energy infrastructure company providing fuels that keeps the the "city that never sleeps" running.

Job Description Diesel mechanic - diagnostics Skills we need: Hands-on diesel repair experience in diesel and machinery repairs. Truck diesel repair experience, hands-on diagnostics, forklifts, propane, and electric systems. · Excellent diagnostic skills utilizing a diagnostic laptop, the latest software in diesel diagnostics, including all types of Related trucking forklifts, material moving equipment, and other machinery. · References must be supplied, such as prior related employment. · Criminal background check must pass drug screening, etc. SUMMARY of the successful diesel mechanic experience, skills, and demeanor we require. The successful candidate has at least three years of experience in repairing diesel trucking equipment, including mechanical, engine, brakes, and electrical systems for the trucking transportation and service industry. Must also have. skills in forklift, diesel, mechanical, electrical, propane-related, and list the moving material equipment. US citizen ship and New Jersey license a must clean record we are looking for someone who will undergo a background and criminal background check. Including drug screening US citizen status or permanent green card qualifications. We are looking for a long-term career minded individual. Must have excellent communication skills able to take direction in written and oral form. We must have a team player looking for long-term employment preferably. What our client company can do for you Private Corporation, - you're not just a number. · Family-run - looking for long-term employment · Career minded individual looking for more than just the job but a career path longevity · No travel involved all work done onsite · No layoffs excellent environment · OT available · Excellent job for long term employment. · Local Elizabeth/Jersey City area · if you worked for the rest, join the best \nCompany Description · Stable company with long-term career opportunities · Competitive compensation · Overtime opportunities (when available) · Excellent work environment · Benefits package (where applicable) · Stable company with long-term career opportunities\r\n· Competitive compensation\r\n· Overtime opportunities (when available)\r\n· Excellent work environment\r\n· Benefits package (where applicable)

Job Description Job SummaryWe are looking for a skilled Diesel Mechanic to join our busy, fast paced towing company. As the companies Diesel Mechanic, you will assist our team of drivers by diagnosing and repairing issues with trucks performance and function on a daily basis. Qualified candidate must have an in-depth understanding of diesel tow trucks systems and components. Qualifications • High school diploma or GED is required, • Associate degree or completion of an automotive service technician training program is preferred, • Automotive Service Excellence/ASE certification or Society of Automotive Engineers/SAE certification is preferred, • Strong customer service and communication skills are required, • Must be able to work on Cummins, Rams, Fords 550 & 650 and Peterbilts., • MUST HAVE DIESEL MECHANIC EXPERIENCE!!, • MUST LIVE within 20 miles of Saddle Brook New Jersey!!, • Candidates are required to have their own tools. Hours: Monday - Friday 8:00AM to 5:00PM Responsibilities • Diagnose and repair shop owned trucks, • Carry out routine vehicle maintenance tasks such as oil changes and brake pad replacements., • Conduct in-depth vehicle inspections of all systems, including engine, transmission, and brakes. Benefits/Perks • Careers Advancement Opportunities, • Competitive Compensation, • Dental and Vison Insurance

Job Description Auto Repair Shop in boropark Brooklyn looking for reliable/full-time mechanics. Please call # (917)642-7375 Requirements: -Driver License a must -oil changes -brakes -front ends -electrical -New York State Inspection License a plus -Must have own full set of tools • knowledge in troubleshooting/Diagnostics -Mechanic With Diesel and Electrical Experience a PLUS -Salary based on experience • start immediat

Job DescriptionCarvana Diesel Technician: Join Our Fleet Maintenance Team! Join our rapidly growing team at Carvana, where we're revolutionizing the car buying experience! We're seeking a skilled and dedicated Diesel Technician to join our innovative Fleet Maintenance team. If you're a problem-solver who enjoys working on Class 8 trucks and trailers and is passionate about vehicle uptime, we want to hear from you. Why You'll Love Working Here We're proud to offer our team members a supportive, collaborative environment and outstanding benefits. • Competitive Pay & Benefits:, • Competitive hourly compensation and overtime opportunities, • Comprehensive medical, dental, and vision coverage, • Matching 401k, • PTO: Accrue 104 hours in your first year!, • Tool Allowance: Receive a $500 annual tool allowance to keep your equipment up-to-date., • Boot Allowance: Get a $100 boot allowance every 6 months to ensure you have the right gear., • Investments in Your Future:, • ASE certification reimbursement (we cover the cost!), • Tuition reimbursement and student loan repayment programs, • Opportunities for growth and advancement within a rapidly expanding company, • Internal training, including classroom time for DTNA ARC Certification, • Unique Perks:, • Carvana employee discount on vehicle purchases, • Pet benefits and much more! $2000-$4000 Sign on Bonus! A Day in the Life: What You'll Be Doing As a Diesel Technician, you'll be a key part of our Fleet Maintenance team, ensuring our Class 8 fleet is safe and reliable. Our fleet is primarily day cabs and trailers, all under manufacturer warranty—meaning no major engine overhauls or roadside calls. You'll perform a variety of tasks, with clear pathways for growth: • Routine Maintenance & Repair: Perform preventative maintenance, inspections, and component replacements on our fleet., • Diagnostics: Utilize diagnostic tools and software to troubleshoot complex electrical, engine, and transmission problems., • System Repairs: Address issues with aftertreatment systems (DEF/emissions), perform regens, and change filters., • Collaborate & Optimize: Work with your team to maintain accurate records, optimize vehicle performance, and minimize downtime., • Safety First: Adhere to all safety protocols and industry best practices to ensure our fleet is always DOT compliant.What We're Looking For We're searching for skilled professionals with a strong background in diesel technology. • Experience: 3+ years of experience with Heavy-Duty Class 8 trucks and trailers or similar equipment (e.g., agricultural, construction, waste collection truck)., • Technical Skills:, • Strong diagnostic and troubleshooting skills for diesel engines, transmissions, and vehicle systems., • Proficiency with diagnostic software and using a laptop for manuals., • Experience with aftertreatment systems and electrical diagnostics., • Comfortable with MIG welding is a plus., • Certifications & Training:, • A minimum of two ASE Certifications within the first 6 months of employment (we'll reimburse you!)., • T-series ASE Certifications are highly valued., • Requirements:, • A valid Driver's License with clean driving record, • Ability to perform physical tasks associated with vehicle maintenance (lifting, bending, etc.)., • Strong attention to detail and a commitment to quality workmanship., • A solid attendance record and punctuality are essential for this role.About Carvana At Carvana, we're on a mission to change the way people buy cars. We're a technology company bringing transparency and convenience to the car buying process. We believe in putting the customer first and fostering a culture of innovation and collaboration. Our team members are our greatest asset, and we're committed to providing a workplace where everyone can thrive. Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check and drug test. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description Barton & Gray Mariners Club is revolutionizing the yachting industry with best-in-class hospitality. As an exclusive yachting club, we provide private and memorable outings across 35+ stunning harbors. With our expanding footprint, we are seeking a highly skilled Commercial Fleet Technician (Diesel Mechanic) to oversee the preventive maintenance, troubleshooting, and repair of our company-owned fleet. Our operation utilizes heavy-duty trucks, service vans and trucks, and specialized marine transport equipment. The ideal candidate will be a self-motivated professional capable of keeping our equipment running reliably. You will work primarily with Peterbilt and Volvo trucks and specialized trailers, including lowboy marine trailers and a hydraulic boat trailer. Why B&G? Our team delivers best in class service to our Members, while enjoying a team and work culture unique to the yachting industry. Our technicians have the opportunity to work with the Club year-round, being provided top notch equipment, training and competitive benefits. What We Offer: Competitive Compensation Company paid travel expenses Paid Vacation: Enjoy time off, because we value a work life balance. 401k Retirement Plan: We offer 401k contribution opportunities with a competitive 401k employer match. Health Insurance Plan: Comprehensive coverage for you and your family’s peace of mind. Telephone reimbursement: Eligible employees receive a cell phone reimbursement or utilization of a company provided tablet. Company recognition incentives after three and five years of employment Primary Responsibilities: Perform preventative maintenance and schedule service on company-owned vehicles, trailers, and support equipment. Troubleshoot mechanical and electrical systems as needed Resolve emergency repairs to minimize downtime Perform overhaul, maintenance, and detailed troubleshooting on diesel engines, with specific expertise in Caterpillar (3406 / C15) and Volvo (D13 series) platforms. Inspect, service, and repair manual and automated manual transmissions Diagnose and repair heavy-duty drivetrain, air brake systems (ABS/conventional), steering gear, and front/rear suspension components (air ride, leaf spring, walking beam) Run computer diagnostics to clear fault codes, trace electrical gremlins, and make repairs Maintain, inspect, and repair fleet trailers, including heavy-haul marine lowboy trailers as well as hydraulic boat trailer Wheel end maintenance (seals, bearings, hubs), lighting/electrical repairs, and frame/structure inspections across all trailer inventory Maintain a clean, organized, and safe shop environment; manage shop inventory, tools, and replacement parts stock Maintain accurate maintenance records, repair documentation, and parts inventory Other duties as assigned Required Skills & Abilities: 5+ years of experience maintaining diesel and gasoline fleet vehicles or heavy equipment Strong knowledge of diesel engines, electrical systems, trailers, and mechanical troubleshooting Experience in hydraulic systems Experience with preventive maintenance programs Valid drivers license

Job Description Job Summary The Fuel & Grease Service Mechanic is responsible for traveling between construction and landscape job sites throughout New Jersey and New York to perform preventative maintenance, fueling, lubrication, inspections, and minor repairs on company-owned equipment and vehicles. This position plays a critical role in supporting field operations by ensuring equipment remains properly serviced, safe, and ready for daily production. The ideal candidate is self-motivated, organized, and comfortable working independently while maintaining strong communication with equipment operators, supervisors, and the maintenance team. Why Join Let It Grow? • Competitive compensation and overtime opportunities., • Work independently while supporting a large and growing fleet., • Exposure to a wide variety of construction and heavy equipment., • Opportunity for career advancement into senior maintenance and fleet management roles., • Be part of a company with more than 40 years of success serving the New Jersey and New York markets. Key Responsibilities: • Travel daily between company job sites throughout New Jersey and New York., • Fuel heavy equipment, fleet vehicles, and construction machinery., • Perform routine greasing and lubrication services on excavators, loaders, skid steers, trucks, trailers, and other equipment., • Conduct daily and weekly preventative maintenance inspections., • Check and maintain fluid levels, including engine oil, hydraulic oil, coolant, transmission fluid, and DEF., • Inspect equipment for leaks, wear, damage, and safety concerns., • Perform basic mechanical repairs and adjustments in the field when appropriate., • Identify maintenance issues and communicate repair needs to the Lead Mechanic and maintenance department., • Maintain accurate service logs, fuel records, and equipment inspection reports., • Coordinate with field supervisors to ensure equipment service schedules are met with minimal disruption to operations., • Maintain service truck inventory, including lubricants, filters, fueling supplies, and maintenance tools., • Adhere to all company safety procedures and DOT requirements., • Ensure a clean, organized, and professional service vehicle and work environment. Qualifications: • High school diploma or equivalent required., • Minimum of 2 years of experience working with heavy equipment, fleet maintenance, diesel equipment, or construction machinery., • Knowledge of preventative maintenance programs and lubrication practices., • Basic mechanical troubleshooting and repair skills., • Ability to identify common equipment maintenance issues and safety concerns., • Valid driver's license with a clean driving record., • CDL preferred or willingness to obtain. Preferred Skills • Experience servicing construction, landscape, or heavy civil equipment., • Knowledge of diesel engines, hydraulic systems, and heavy equipment operations., • Familiarity with DOT inspections and fleet maintenance procedures., • Experience operating service trucks and mobile fueling equipment., • Welding and fabrication experience is a plus., • OSHA 10 or OSHA 30 certification preferred., • Bilingual (Spanish/English) is a plus., • Strong organizational and communication skills. Physical Requirements • Frequently lift, carry, and move materials weighing up to 50 pounds., • Climb on and around heavy equipment and trucks., • Work outdoors in varying weather and job site conditions., • Bend, kneel, crouch, and stand for extended periods., • Safely operate service vehicles and fueling equipment.\nCompany Description Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come. Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come.

Job Description Job Summary The Diesel Mechanic will be responsible for diagnosing, repairing, and maintaining a wide range of diesel-powered equipment, including heavy-duty trucks, construction machinery, and fleet vehicles. This role is critical to ensuring our equipment operates safely, efficiently, and reliably in support of daily operations. The successful candidate will work from our Clifton, NJ maintenance facility and collaborate closely with an experienced maintenance team consisting of one Lead Mechanic and two established Mechanics. This position offers the opportunity to work alongside skilled professionals in a well-equipped shop environment, contributing to the maintenance and performance of a large and diverse fleet. Why Join Let It Grow? • Work in a modern, fully equipped three-bay repair facility in Clifton, NJ., • Be part of a collaborative maintenance team that includes a Lead Mechanic and experienced technicians., • Support a large fleet of trucks, trailers, and heavy construction equipment., • Join a stable, growing organization with a strong reputation and over 40 years of industry success., • Opportunity for ongoing professional development and advancement within the organization. Key Responsibilities: • Inspect, diagnose, and repair diesel engines, including trucks, trailers, construction equipment, and other heavy machinery., • Perform routine maintenance such as oil changes, filter replacements, fluid checks, and preventative service inspections., • Troubleshoot and repair electrical, fuel, hydraulic, and mechanical systems to ensure optimal performance., • Use diagnostic tools and software to identify faults and verify repairs., • Maintain accurate service records and track completed repairs using internal systems., • Order necessary parts and maintain inventory levels for common repairs., • Communicate clearly with supervisors and operators regarding equipment status, repair needs, and timelines., • Ensure compliance with safety standards and maintain a clean, organized, and safe work environment., • Assist with seasonal maintenance, inspections, and equipment readiness. Qualifications: • High school diploma or equivalent; trade school or diesel technician certification preferred., • Minimum of 2 years’ experience working on diesel engines or heavy equipment., • Strong knowledge of diesel engines, hydraulic systems, electrical systems, and emissions systems., • Ability to read and interpret schematics, wiring diagrams, and service manuals., • Valid driver’s license with a clean driving record; CDL preferred or willingness to obtain., • Ability to lift up to 50 lbs and work in various weather and shop conditions. Preferred Skills • Experience with construction, heavy equipment, or fleet maintenance., • Knowledge of DOT inspection standards and regulations., • Welding and fabrication experience is a plus., • Familiarity with computerized diagnostic tools and fleet management systems., • Bilingual (Spanish/English) is a plus., • OSHA 10/30 certification preferred, or willingness to obtain.\nCompany Description Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come. Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $45-$58 depending on experience, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: • Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting., • Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment., • Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions., • Interface with system operators/field technicians and provides technical guidance., • Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning., • Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner., • Maintain designated project & service records, and practice consistent record keeping., • Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible., • Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity., • Regularly improve and update product knowledge by participating in educational and product training opportunities., • This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected. The position must complete other work tasks as assigned. Qualifications:, • The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines)., • Will also consider technicians that have a more holistic background and excellent experience and track record around complex technologies like aircraft engines and turbines., • Be able to complete technical start-up of gas engines and CHP power systems., • Independently diagnose and repair power systems., • Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panel wiring., • Must be available to work over-time and occasionally travel on weekends., • Must be able and willing to travel., • Must be able to work independently., • Excellent written and verbal communication skills and demonstrated proficiency composing written communications., • Outstanding interpersonal skills., • Excellent telephone skills and computer knowledge., • High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities., • Resourceful, well organized, highly dependable, efficient and detail oriented., • Must present a positive, professional, and team player attitude., • Must be flexible and able to adapt to change quickly., • Must possess a valid driver’s license, • Experience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on and . CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job DescriptionDescription: Description Controlled Combustion is the leading commercial heating contractor in NYC. We serve a variety of industries, including luxury apartments, hospitals, universities, commercial buildings, and more. With over 150 employees, our team is as diverse as the services we offer. We are looking for a Junior Commercial Heating Technician / Burner Helper to join our growing field service team. This position is a strong fit for someone with mechanical ability and some hands-on experience in HVAC, heating, electrical work, facilities maintenance, plumbing, pipefitting, auto/diesel repair, or another related mechanical trade. It is designed for someone who wants to build a long-term career in commercial heating service. This is not a senior technician position. It is a hands-on field role for someone who is dependable, eager to learn, comfortable using tools, and willing to work alongside experienced technicians while developing the skills needed to service commercial gas and oil burners, boilers, controls, and related electrical systems. Qualified candidates may have the opportunity for Local Union 638-B enrollment as they develop in the role. Responsibilities • Assist senior technicians with the service, maintenance, troubleshooting, and repair of commercial gas and oil burners., • Learn how to work on atmospheric boilers, condensing boilers, Scotch marine fire tube boilers, and related commercial heating equipment., • Assist with diagnosing combustion issues, open limits, electrical problems, control issues, and related service calls., • Use hand tools, electrical meters, combustion gas analyzers, and other field service equipment under supervision., • Help maintain clean, organized work areas, vehicles, tools, and equipment., • Follow instructions carefully and ask questions when additional guidance is needed., • Communicate professionally with customers, dispatch, supervisors, and other technicians., • Complete service reports and job documentation accurately and on time., • Follow company safety procedures, customer site requirements, and industry best practices., • Participate in overtime, weekend work, and after-hours/on-call opportunities as training and qualifications progress. Benefits • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Retirement plan, • Vision insurance, • Overtime opportunities, • Stable year-round commercial work, • Opportunity for advancement, • Hands-on training and long-term career growth, • Potential opportunity for Local Union 638-B enrollment for qualified candidates Schedule • Monday to Friday, • Overtime, • Weekends as needed, • After-hours/on-call opportunities as training and qualifications progress Supplemental Pay • Bonus opportunities, • Double time pay, • Overtime pay, • On-call premium pay, when applicable Experience Preferred • HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or related mechanical trade experience: 1 year preferred, • Commercial heating or boiler experience preferred, but not required, • Basic electrical troubleshooting experience preferred, • Experience using hand tools required, • Experience using meters or diagnostic tools is a plus, • Trade school or technical school background is a plus License / Certification • Driver’s License preferred Work Location • In person / field service throughout the New York Metropolitan areaRequirements: Qualifications / Skills • Strong mechanical aptitude and willingness to learn., • Interest in building a long-term career in commercial heating service., • Comfortable working with hand tools and learning field service equipment., • Basic understanding of electrical troubleshooting preferred., • Ability to follow instructions carefully and work under the direction of experienced technicians., • Reliable, punctual, dependable, and willing to work in the field., • Strong work ethic and professional attitude., • Good communication skills with customers, supervisors, dispatch, and other technicians., • Ability to complete basic service documentation accurately., • Willingness to learn about gas and oil burners, boilers, combustion theory, controls, and electrical troubleshooting., • Willingness to work overtime, weekends, and participate in after-hours/on-call opportunities as experience grows. Minimum Education and Work Experience • High school diploma or equivalent preferred., • At least 1 year of hands-on experience in HVAC, heating, electrical, facilities maintenance, plumbing, pipefitting, auto/diesel, or another mechanical trade preferred., • Trade school, technical school, or related coursework is a plus., • Prior commercial heating, burner, boiler, or field service experience is a plus, but not required.

Job DescriptionPosition Summary: We are seeking a highly skilled and experienced Refrigeration Technician to join our team at a busy commercial truck dealership. The ideal candidate will have a minimum of 5 years’ hands-on experience working with Carrier and Thermo King transport refrigeration systems. This position is responsible for diagnosing, servicing, and repairing refrigeration units on commercial trucks and trailers. Key Responsibilities: Diagnose and troubleshoot Carrier and Thermo King refrigeration systems Perform routine maintenance, repairs, and installations on reefer units Inspect components, such as compressors, evaporators, and electrical systems Perform refrigeration system recovery, evacuation, and recharging Ensure work is completed to manufacturer standards and customer expectations Maintain accurate service records and work orders Provide clear communication with service advisors and customers Adhere to all safety and environmental regulations Qualifications: Minimum 5 years of experience working with Carrier and Thermo King transport refrigeration units EPA 608 Certification (Type II or Universal) preferred Valid driver’s license with a clean driving record Strong mechanical and electrical diagnostic skills Ability to work independently and efficiently in a fast-paced environment Excellent attention to detail and commitment to quality work Strong communication and customer service skills Preferred Skills: OEM training or certification with Carrier and/or Thermo King CDL (Commercial Driver’s License) a plus Familiarity with diesel engine systems and trailer repair Basic computer skills for diagnostic tools and software Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

🔧Diesel Mechanic Location: Royal Waste- Queens NY Schedule: Monday through Friday, starting at 7:00 PM, Saturdays until 1pm as needed. Rate: $30–$40/hr, depending on experience Employment Type: Full-time Royal Waste Services is looking to add a Road Service Mechanic to our growing maintenance team. We are committed to hiring mechanics who prioritize driver safety, fleet reliability, and the quality of service we provide to our community. As a mechanic with us the minimum responsibilities are: Key Responsibilities • Perform inspections, repairs, safety checks, and diagnostics on diesel vehicles, including electrical, hydraulic, suspension, brake, and air systems., • Utilize vehicle computer systems to interpret failure codes and adjust Engine and Vehicle Control Modules., • Respond to road calls and perform emergency roadside repairs., • Review, complete, or assign repairs identified on Driver Vehicle Inspection Reports (DVIRs)., • Accurately complete required documentation using fleet maintenance software., • Conduct post‑service test drives to ensure repairs meet safety and performance standards., • Collaborate with team members on complex repairs as needed., • Maintain professional and courteous communication with drivers., • Keep work areas clean, organized, and compliant with OSHA and company safety standards., • Perform other job‑related duties as assigned. What We Need From You • Proficiency in diesel diagnostics, preventative maintenance, and repair., • Basic tool set required., • Must Have a valid Class B CDL or ability to obtain within 90 days of hire., • Hydraulic experience is a plus., • Strong skills in electrical and hydraulic systems, • Well-rounded experience in mechanical and welding repairs Benefits • Competitive compensation., • 401(k) with company match — helping you invest in your future., • Medical, dental, and vision coverage., • Life insurance and short‑term/long‑term disability. WHY YOU NEED TO JOIN US CULTURE: It’s a great place to work! We operate in an environment where empowered, self‑directed All Stars know the importance of their work. INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees. Waste Connections — Apply today and Connect with Your Future! _ Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Job Description Come Run With the Big Dogs Big M Transportation is Hiring Solo & Team Company Drivers for OTR Opportunities! Over-the-road drivers continue to be the top earners in the trucking industry, and becoming part of a team is often the best way to ensure more miles and more time at home, without sacrificing income. If you and your driving partner have what it takes, you will become part of an elite group of drivers who have definitely earned their spot in the “Big Dog” pack at Big M Transportation. Now offering Sign On Bonuses for a Limited Time! September Starts Driver Appreciation Mileage Bonuses! Company OTR Positions Include: • Solo Base Pay Up To 62 CPM and is Based on Experience, • Teams earn 75 CPM or $200,000+/year!, • Orientation: $500 pay for New Hires; two and half day orientation class, • Home Time: Every 10-14 days, Drivers within 300 miles of HQ are Home Weekly!, • $2,000 Sign On Bonus for Experienced Drivers, • $500 upon completion of orientation — Week 1, • $500 at 60 days, • $500 at 90 days, • $500 at 120 days, • Average Weekly Miles: 2500-3000 per driver, • 2020 - 2024 Volvos and Freightliners with top of the line technology, • Pet and Rider Policies - NO Waiting Period!, • Run everywhere East of I35, • Best Pay Rates, • Personal Driver Manager, • Full Benefits, • Control Your Own Pay BENEFITS FOR ALL FULL-TIME DRIVERS (Benefits start at 90 days) • Health Insurance, • Matching 401(k), • Cancer Coverage Policy, • Dental Insurance, • Vision Coverage, • Life Insurance Policy, • Disability Coverage, • IRA Contribution Options, • Rider Policy, • Pets REQUIREMENTS • 12+ Months of CDL-A Experience GET IN TOUCH - Have questions? Want to see where your career could go? Our recruiting team will help you get on the right track today! Are you willing to team? Call today to discuss our team matching opportunities!

Job Description Come Run With the Big Dogs Big M Transportation is Hiring Solo & Team Company Drivers for OTR Opportunities! Over-the-road drivers continue to be the top earners in the trucking industry, and becoming part of a team is often the best way to ensure more miles and more time at home, without sacrificing income. If you and your driving partner have what it takes, you will become part of an elite group of drivers who have definitely earned their spot in the “Big Dog” pack at Big M Transportation. Now offering Sign On Bonuses for a Limited Time! September Starts Driver Appreciation Mileage Bonuses! Company OTR Positions Include: • Solo Base Pay Up To 62 CPM and is Based on Experience, • Teams earn 75 CPM or $200,000+/year!, • Orientation: $500 pay for New Hires; two and half day orientation class, • Home Time: Every 10-14 days, Drivers within 300 miles of HQ are Home Weekly!, • $2,000 Sign On Bonus for Experienced Drivers, • $500 upon completion of orientation — Week 1, • $500 at 60 days, • $500 at 90 days, • $500 at 120 days, • Average Weekly Miles: 2500-3000 per driver, • 2020 - 2024 Volvos and Freightliners with top of the line technology, • Pet and Rider Policies - NO Waiting Period!, • Run everywhere East of I35, • Best Pay Rates, • Personal Driver Manager, • Full Benefits, • Control Your Own Pay BENEFITS FOR ALL FULL-TIME DRIVERS (Benefits start at 90 days) • Health Insurance, • Matching 401(k), • Cancer Coverage Policy, • Dental Insurance, • Vision Coverage, • Life Insurance Policy, • Disability Coverage, • IRA Contribution Options, • Rider Policy, • Pets REQUIREMENTS • 12+ Months of CDL-A Experience GET IN TOUCH - Have questions? Want to see where your career could go? Our recruiting team will help you get on the right track today! Are you willing to team? Call today to discuss our team matching opportunities!

Job Description Come Run With the Big Dogs Big M Transportation is Hiring Solo & Team Company Drivers for OTR Opportunities! Over-the-road drivers continue to be the top earners in the trucking industry, and becoming part of a team is often the best way to ensure more miles and more time at home, without sacrificing income. If you and your driving partner have what it takes, you will become part of an elite group of drivers who have definitely earned their spot in the “Big Dog” pack at Big M Transportation. Now offering Sign On Bonuses for a Limited Time! September Starts Driver Appreciation Mileage Bonuses! Company OTR Positions Include: • Solo Base Pay Up To 62 CPM and is Based on Experience, • Teams earn 75 CPM or $200,000+/year!, • Orientation: $500 pay for New Hires; two and half day orientation class, • Home Time: Every 10-14 days, Drivers within 300 miles of HQ are Home Weekly!, • $2,000 Sign On Bonus for Experienced Drivers, • $500 upon completion of orientation — Week 1, • $500 at 60 days, • $500 at 90 days, • $500 at 120 days, • Average Weekly Miles: 2500-3000 per driver, • 2020 - 2024 Volvos and Freightliners with top of the line technology, • Pet and Rider Policies - NO Waiting Period!, • Run everywhere East of I35, • Best Pay Rates, • Personal Driver Manager, • Full Benefits, • Control Your Own Pay BENEFITS FOR ALL FULL-TIME DRIVERS (Benefits start at 90 days) • Health Insurance, • Matching 401(k), • Cancer Coverage Policy, • Dental Insurance, • Vision Coverage, • Life Insurance Policy, • Disability Coverage, • IRA Contribution Options, • Rider Policy, • Pets REQUIREMENTS • 12+ Months of CDL-A Experience GET IN TOUCH - Have questions? Want to see where your career could go? Our recruiting team will help you get on the right track today! Are you willing to team? Call today to discuss our team matching opportunities!

Job Description Conrail has an immediate opening for the position of Electrician in North Jersey. PRINCIPAL DUTIES AND RESPONSIBILITIES: Perform electrical inspection, maintenance, repair and testing activities on diesel/electric locomotives and electrical components in a shop environment or outdoors. GENERAL PHYSICAL REQUIREMENTS: • Must understand the principles of electricity., • Read manufacturers' manuals for technical information., • Read and interpret prints, schematics or wiring diagrams., • Must be qualified to work on three-phase electrical circuits., • Troubleshoot, repair or replace electronic and microprocessor-based equipment., • Repair or replace high voltage equipment such as circuit breakers or transformers., • Install, disassemble, or replace parts or pieces of equipment or systems., • Start, stop, monitor operations, and make minor adjustments to machines. MISCELLANEOUS REQUIREMENTS: • Work in varying weather conditions., • Work in a setting where the focus is on the task., • Work safely around potentially hazardous materials/machinery., • Wear protective clothing., • Respond to changing work assignments., • Work non-standard hours or various shifts., • CDL Not required, but helpful. CONRAIL is an EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER \nCompany Description Conrail is a small railroad with big resources where you can have a rewarding career without sacrificing quality of life. As a terminal and switching service provider for its owners, CSX Transportation and Norfolk Southern, Conrail provides safe and efficient rail service for many local rail freight customers in Detroit, New Jersey and Philadelphia. Customers located along Conrail’s lines in these shared asset areas have access to the nation’s rail network through either NS or CSX. Although Conrail no longer handles commercial matters for customers, we continue to play a critical role in serving shippers and receivers as an agent for our owners. As a local rail service provider, it is Conrail’s job to make sure that customers’ freight shipments are safely and efficiently moved between their rail sidings and the long-distance freight trains operated by CSX and Norfolk Southern. Conrail is a small railroad with big resources where you can have a rewarding career without sacrificing quality of life.\r\nAs a terminal and switching service provider for its owners, CSX Transportation and Norfolk Southern, Conrail provides safe and efficient rail service for many local rail freight customers in Detroit, New Jersey and Philadelphia. Customers located along Conrail’s lines in these shared asset areas have access to the nation’s rail network through either NS or CSX.\r\n\r\nAlthough Conrail no longer handles commercial matters for customers, we continue to play a critical role in serving shippers and receivers as an agent for our owners. As a local rail service provider, it is Conrail’s job to make sure that customers’ freight shipments are safely and efficiently moved between their rail sidings and the long-distance freight trains operated by CSX and Norfolk Southern.

Who We're Looking ForAirline Maintenance Technicians Ground Support Equipment (GSE) Technicians Diesel & Heavy Equipment Technicians Industrial Maintenance Professionals Electrical, HVAC & Controls Technicians Military Maintenance Leaders Technical Trainers & MentorsWhat You'll DoDeliver hands-on te

FSM Group, LLC, an aviation fuel management company with multiple locations in the US, has an immediate need for multiple Mechanic positions for ground services equipment maintenance at its JFK airport operation. FSM Group where safety is paramount, strives to pay competitive wages, offer meaningful and affordable health insurance, growth opportunities for performers, and a work environment of respect. The Mechanic position's primary responsibility is to ensure a variety of ground services equipment are operational on an ongoing basis and meet safety requirements. Ground services equipment include, but are not limited to, fuel carts, hydrant trucks, luggage tugs, deicing trucks, and catering trucks. Essential Duties: • Preventative and routine repair services., • Coolant and fluid checks., • Brake checks and tire changes., • Troubleshooting and diagnostics., • Repairs and refurbishments of equipment., • Conduct safety checks on service equipment., • Other duties as assigned. Benefits: • Strong culture of promoting from within, • Pay On Demand Program - Your paycheck before payday, • Medical, Dental, Vision, and Life Insurance, • 401(k) matching program with immediate vesting, • Paid Time Off per year, • …and much more! Learn more at fsmgroup.us Requirements Minimum Qualifications: • 18 years of age or older;, • Reliable transportation;, • Eligible to work in the United States;, • Valid state driver's license with clean motor vehicle record;, • Successfully pass a pre-employment drug screening and federal fingerprint background check., • 1-2 years of mechanical experience of any kind (preferably auto mechanic, box truck, HVAC, refrigeration systems, etc.), • Mechanical minds who enjoy problem-solving, • General knowledge of carburetors, alternators, starter motors, batteries, hydraulics, small engines, radiators, and diesel engines, • Experience working on Ground Support Equipment is preferred, but not required., • Electrical and diesel skills are preferred, but not required. Additional Qualifications: • Ability to problem solve;, • Basic mathematical skills;, • Demonstrated regular, predictable attendance at the airport location;, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals;, • Ability to communicate in English while on the job with customers, coworkers, or supervisors who only speak English, in emergencies or other situations in which employees must speak a common language to promote safety;, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form;, • Basic understanding of computer applications and data entries. Physical and Environmental Requirements: This position requires sustained physical effort and consistent exposure to outdoor and potentially hazardous work environments. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job, with or without reasonable accommodation. Mobility and Access: • Must be able to climb up and down stairs and ladders with 50+ steps and work at heights of 50 feet or more, including high, precarious places., • Must be able to get in and out of vehicles of varying sizes and heights., • Must be able to drive and operate vehicles and equipment of various sizes, including automated lifts up to 26 feet. Lifting and Carrying: • Frequently lift and carry up to 30 pounds overhead., • Occasionally lift up to 70 pounds to waist level., • Must be able to shovel materials such as snow, sand, dirt, gravel, or rocks as needed. Standing and Movement: • Ability to sit, stand, walk, bend, squat, kneel, crawl, twist, climb, and balance for extended periods of time., • Perform repetitive physical movements, including bending at the waist and knees, and sustaining awkward or physically demanding positions., • Capable of climbing and standing on step ladders while performing overhead work, such as connecting fueling hoses., • Manual Dexterity, • Use hands and fingers to handle, feel, grip, and operate tools, equipment, and controls. Sensory Requirements: • Hear and respond to verbal instructions, environmental sounds, and audible alarms., • Maintain the following vision capabilities:, • Close vision (clear vision at 20 inches or less), • Distance vision (clear vision at 20 feet or more), • Color vision (identify and distinguish between colors), • Peripheral vision (see up/down and side-to-side while focused on a central point), • Depth perception (assess distance and spatial relationships), • Ability to adjust focus (sharpen vision at various distances) Environmental and Working Conditions: • Work outdoors in all weather conditions, including extreme heat, cold, rain, snow, and wind., • Tolerate frequent exposure to:, • Moderate to high noise levels (with use of appropriate hearing protection), • Fumes, airborne particles, and hazardous substances, materials, or waste, • Work near or around:, • Moving mechanical parts, • High-voltage equipment, • Hydraulic and pneumatic systems operating under high pressure, • Work in elevated or precarious positions, such as on lifts, ladders, or elevated platforms. EEOC/ADA, but also OFCCP, VEVRAA, and Section 503 expectations This job description outlines the general nature and level of work required for the position and is not intended to be an exhaustive list of all duties, responsibilities, or qualifications. In accordance with the Americans with Disabilities Act (ADA), Section 503 of the Rehabilitation Act, and applicable state and local laws, qualified individuals must be able to perform the essential functions of the position, with or without reasonable accommodation. FSM Group, LLC provides reasonable accommodations to qualified individuals with disabilities throughout the application, interview, and employment process. If you need an accommodation to apply for a position, participate in the interview process, perform essential job functions, or access other employment benefits, please contact jobs@fsmgroup.us. Equal opportunity employer as to all protected groups, including protected veterans and individuals with disabilities.

We have an exciting opportunity to join our team as a Plant Operating Engineer. Under the supervision of the energy building plant manager, monitor and operate combined heat and power plant (boilers, gas turbines, steam turbines, heat recovery steam generators, diesel generators, transformers, switchgear and electrical distribution equipment, auxiliary equipment, connected equipment controls, etc.). Ensure plant operations are performed safely and efficiently; monitor and respond to changes in operating conditions and system load demands to maintain continuous plant performance and prescribed plant output; perform preventive maintenance duties and routines. As required, receive plant fuel and material deliveries. Maintain qualifications for, perform stack emissions observations, document and write/generate reports satisfactory to the authorities having jurisdiction, and maintain/operate emissions equipment. Job Responsibilities: • Makes rounds to ensure that appropriate corrective and preventative maintenance measures are taken to continue operation efficiently and uninterrupted. Identifies problems in areas, equipment and other issues. Communicates issues to other shops and management. Repairs equipment under domain., • Ensure plant operations are performed safely and efficiently; monitor and respond to changes in operating conditions and system load demands to maintain continuous plant performance and prescribed plant output; perform preventive maintenance duties and routines. As required, receive plant fuel and material deliveries. Maintain qualifications for, perform stack emissions observations, document and write/generate reports satisfactory to the authorities having jurisdiction, and maintain/operate emissions equipment., • Operate manual and automatic valves and controllers in the plant. Respond to field emergencies as needed. Perform lock out tag out as directed. Operate the plant either in the field or via the plant computerized control systems, • Provide complete and effective shift turn-over to oncoming shift. On an ongoing basis, be aware of and up-to-date with, plant conditions by reviewing the operations communication binder, work orders, outage work packages, log book, shift turn-over reports, night orders, standing orders, lock out tag out log, plant control systems or other communication protocols as directed., • Respond to emergencies in central plant and other locations and restore plant and building systems to stable and safe operations; troubleshoot and fulfill/resolve work orders as directed by Engineer or plant management., • Perform rounds and prepare work orders for required maintenance work. Respond to and record completed activities in work order system relative to job duties, including daily or frequent activities such as fuel changeovers, cleaning and changing strainers, water chemistry readings, reports and physically adding chemicals to the plant etc. Perform cleaning stations tasks and duties, operations work orders and night work orders completely and safely. Additional tasks and duties as directed by the Engineer or plant management., • Perform plant rounds and record plant parameters on prescribed frequencies with required details as directed. Troubleshoot any abnormal plant conditions and report to plant management as required and directed. Provide safe and efficient operation and maintenance of the cogeneration facility., • Maintain all relevant licenses including steam operator, fire safety director, emergency action plan director, standpipe/sprinkler, fuel oil operator, fire alarm, etc., • Demonstrate leadership and interpersonal skills and following accepted procedures and techniques in conformance with N.Y.U. Langone Medical Center requirements., • Maintain plant equipment and work areas in a safe, clean and healthful manner. Observe all Human Resource employee guidelines, departmental guidelines, policies, procedures and plant safety requirements including work rules and guidelines at all times and supervise personnel accordingly., • Respond to emergencies in central plant and other locations and restore plant and building systems to stable and safe operations; troubleshoot and fulfill/resolve work orders as directed. Perform operations preventive, predictive and corrective maintenance as directed., • Prepare work orders for required maintenance and repair work. Respond to and record completed activities in work order system relative to job duties, including daily or frequent activities such as fuel changeovers, cleaning and changing strainers, feed water and other chemical treatment, chemistry testing and application etc. Perform cleaning stations, operations work orders and night work orders completely and safely. Ensure all areas of plant and building are cleaned, maintained and organized., • Uphold medical center and department policies, including safe work practices, ethics guidelines and work order procedures. Work in collaboration with other Facilities Management and medical center departments and colleagues, service providers as requested by Supervisor/Manager., • Demonstrates knowledge of the organization's mission and core values and incorporates them into the performance of duties., • Performs other duties as assigned. Minimum Qualifications: • High School Diploma or Equivalent, • 5 years of relevant Experience., • City of New York Engineers License for High Pressure Boilers, Engines and Pumps required. Required Licenses: • Statnary Engr High Pres Boiler Qualified candidates must be able to effectively communicate with all levels of the organization. NYU Langone Health provides its staff with far more than just a place to work. Rather, we are an institution you can be proud of, an institution where you'll feel good about devoting your time and your talents. At NYU Langone Health, we are committed to supporting our workforce and their loved ones with a comprehensive benefits and wellness package. Our offerings provide a robust support system for any stage of life, whether it's developing your career, starting a family, or saving for retirement. The support employees receive goes beyond a standard benefit offering, where employees have access to financial security benefits, a generous time-off program and employee resources groups for peer support. Additionally, all employees have access to our holistic employee wellness program, which focuses on seven key areas of well-being: physical, mental, nutritional, sleep, social, financial, and preventive care. The benefits and wellness package is designed to allow you to focus on what truly matters. Join us and experience the extensive resources and services designed to enhance your overall quality of life for you and your family. NYU Langone Health is an equal opportunity employer and committed to inclusion in all aspects of recruiting and employment. All qualified individuals are encouraged to apply and will receive consideration. We require applications to be completed online. View Know Your Rights: Workplace discrimination is illegal. NYU Langone Health provides a salary range to comply with the New York state Law on Salary Transparency in Job Advertisements. The salary range for the role is $175,802.64 - $175,802.64 Annually. Actual salaries depend on a variety of factors, including experience, specialty, education, and hospital need. The salary range or contractual rate listed does not include bonuses/incentive, differential pay or other forms of compensation or benefits. To view the Pay Transparency Notice, please click here

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I. In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$25.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionThis position will perform routine and some non-routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under minimal supervision. Handles more advanced issues and problems and may refer more complex issues to higher-level staff. All work is performed with a commitment to safety. May mentor or provide informal guidance to Technician I.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$26.00/hr per union contractMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with moderate supervision on basic and advanced maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components., • Perform mechanical repairs under moderate supervision including the repair of brakes and brake inspections, engine tune-ups, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately. Maintain parts usage records and order repair parts from designated suppliers, • Assist Tech III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Remove and replace engine, transmission and differential assemblies with Maintenance Technician III supervision., • Diagnoses and performs accurately all phases of vehicle and equipment repair under moderate supervision., • Notify supervisor of potentially dangerous equipment and corrective action taken, • Evaluates completed work prior to release and seeks approval where required, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Moves vehicles safely between job and work area, • Repair and maintain all shop equipment, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement required (or expected within 3 months of hire), • State inspection license (if required), • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 3 ASE within 12 months of hire) Minimum Experience or Skills Required • Intermediate mechanical aptitude and 3 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Intermediate problem-solving ability, • Intermediate computer skills, • Comfortable using hand tools, • Strong customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess adequate mechanic tool inventory to complete all assigned duties and maintained in a clean and safe manner Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionNow Hiring: Paratransit Fleet Technician Pay: $32.00/hour First Student is hiring a Fleet Technician to support our paratransit fleet. This is a hands-on maintenance role working with buses and vans that provide essential transportation service to the community. About the Position As a Fleet Technician, you'll perform routine maintenance, inspections, and repairs to help keep our vehicles safe, reliable, and ready for service. You'll work under the direction of experienced maintenance leadership while developing your technical skills and gaining experience working on a large transportation fleet. Key Responsibilities Perform routine preventive maintenance and safety inspections on buses, vans, and other fleet vehicles Complete basic mechanical repairs and replace worn or damaged components Inspect brakes, tires, fluids, electrical systems, and other vehicle systems Diagnose basic mechanical issues and communicate additional repair needs Complete work orders and maintain accurate maintenance records Assist with road calls and vehicle breakdowns when needed Maintain a clean, safe, and organized shop and work area Follow First Student, DOT, and all applicable safety and maintenance requirements Qualifications 3+ years of automotive, diesel, fleet, or related mechanical experience High school diploma or GED preferred Valid driver's license Class B CDL with passenger endorsement preferred; ability to obtain required licensing within approximately 3 months of hire Ability and willingness to participate in First Student's ASE certification program Expected to begin ASE participation within the first year and obtain at least one ASE certification within 24 months Basic mechanical aptitude and willingness to learn Ability to safely use standard hand and shop tools Working Conditions & Physical Requirements Ability to lift up to 50 pounds Ability to stand, bend, kneel, climb, and work around vehicles for extended periods Comfortable working in a maintenance shop and outdoors in varying weather conditions Ability to safely operate vehicles and maintenance equipment as required This is a safety-sensitive position and is subject to applicable DOT and company drug and alcohol testing requirements. If you're mechanically inclined and want to build a long-term career maintaining a professional transportation fleet, we want to hear from you. Apply today to become a Fleet Technician with First Student. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Overview: Are you ready to take flight in a dynamic and fast-paced aviation industry? As a global leader in aviation services, Swissport provides Ground Handling, Cargo Handling, and Passenger Services to over 300 million passengers annually. Our mission is simple – “To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience.” We believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show You Care, Do the Right Things and Win as a Team, and we are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Job summary Fueling Agent provides all necessary and required fueling services as contracted by the customer to include, but not be limited to, aircraft fueling/de-fueling, vehicle fueling and operation of motorized/non-motorized fueling equipment. The expected pay rate is $29.05/hr. Full-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays. Your activities • Receive, store, transfer, and dispense petroleum fuel products, • Operate motorized fueling vehicles (fuel tank trucks, standard and automatic transmissions), • Operate non-motorized fueling vehicles (hydrant carts), • Fuel and de-fuel aircraft per flight crew/flight plan requirements, • Inspect fueling equipment and vehicles – report malfunctions or inconsistencies, • Perform accurate fueling calculations, • Fuel ground support equipment (gasoline or diesel) as required, • Interact with carrier personnel, • Utilize hand-held radios, telephones and computers for communication, • Complete and submit all documentation associated with fueling activities, • Respond to fuel emergencies (i.e. fuel spills) utilizing emergency response cart and follow established environmental/company guidelines, • Comply with all federal, state, municipal, airport authority and carrier security requirements, • Must comply with Swissport SOPs and policies Your profile • Valid CDL A or B and DOT Medical Card - REQUIRED, • Must be able to obtain Hazmat and Tank Endorsement, • Ability to work in a time-sensitive, multiple shift, and team-oriented environment, • Must be dependable and able to take direction from supervisors to service the customer safely and on-time General math aptitude, • Good command of the English language both verbal and written, • Must be willing to work in all weather conditions What we offer • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • Tuition reimbursement, • Vision insurance At Swissport, we believe in diversity, equal opportunity, and the power of our values to drive our success. We are committed to providing a workplace that fosters inclusion and where all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Visit our website at _ to learn more about Life at Swissport. Join Swissport today and be part of a team that connects the world of aviation!

Job DescriptionThis position will perform routine maintenance and repair work on vehicles (buses, vans etc.) which adheres to FirstGroup standards. This may include but is not limited to tire maintenance, fulfilling service calls for repair, conducting visual inspections of vehicles and related work as assigned. Performs work under direct supervision. Handles basic issues and problems and refers more complex issues to higher-level staff. All work is performed with a commitment to safety.In the state of Washington, this position is considered a safety-sensitive position and is therefore subject to drug and alcohol testing, including cannabis.$23.00/hr based on CBAMajor Responsibilities • Ensure vehicles are maintained and safe for our customers by performing limited repairs with minimal supervision on basic maintenance such as replacement of light bulbs, fuses, lenses, wiper blades, belts, hoses, batteries, check fluid levels, change fluids and filters and lubricate components, • Assist Tech II or III with preventative maintenance (PM's), safety maintenance inspections and annual maintenance inspections at prescribed intervals of time and usage, • Assist in the performance of mechanical repairs including the repair of brakes, suspensions, drive trains, transmission clutches and other repairs., • Maintain records of all maintenance work completed on vehicles including parts and supplies used. Ensure that work orders are completed properly and accurately, • Diagnoses and performs accurately all phases of vehicle and equipment repair under direct supervision., • Evaluates completed work prior to release and seeks approval where required, • Notify supervisor of potentially dangerous equipment and corrective action taken, • Moves vehicles safely between job and work area, • Assist with road calls and emergency services as necessary, • Adhere to FirstGroup standards, policies and procedures, • Cleans vehicles as requested or required, • Other responsibility as requested or required Minimum Education or Certifications Required • High school diploma or GED equivalent preferred; vocational or technical certification in vehicle repair (preferred), • Class B CDL with passenger endorsement highly preferred to perform test drives or assist with road call response (expected within 3 months of hire, exceptions can be submitted for approval by Maintenance Leadership., • ASE Certification preferred. Must participate in ASE testing program within 1 year (expected to have 1 ASE within 24 months of hire) Minimum Experience or Skills Required • Basic mechanical aptitude and 0-1 years of automotive or diesel repair experience (preferred) or equivalent education and experience, • Adhere to standards set by state DOT for motor vehicle inspections and safety standards, • Valid driver's license, • Basic problem-solving ability, • Basic computer skills, • Comfortable using hand tools, • Good customer service skills and communication skills, • Ability to work independently as well as part of a team, • Maintain an organized shop and clean work environment, • Regular, predictable, full attendance is an essential function of the job, • Making sure vehicles are maintained and safe for our customers, • Possess basic mechanic hand tools with at least enough tools to perform job requirements Physical Requirements and Working Conditions • Maintenance Shop environment with dust, dirt and grease conditions, • Ability to work under all weather conditions, • Ability to lift a minimum of 50 pounds, • Ability to work in a crouched position or on back, lying on mechanic's creeper, beneath motor vehicle equipment Disclaimer Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. This job description reflects management's assignment of essential functions, it does not prescribe or restrict the tasks that may be assigned. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. \nCompany Description About us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference. About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job DescriptionFleet Maintenance Manager – Commercial Transit (Queens, NY) Location: Queens, New York (On-Site) Schedule: Full-Time | Thursday through Monday (Weekends Required) Days Off: Tuesday & Wednesday Reporting To: National Fleet Manager About Us We are the operational force behind TopView Sightseeing and Tea Around Town (TAT), running a premier, high-volume commercial passenger motorcoach and double-decker fleet across New York City. Operating a dynamic, 24/7 transportation network, we are building a best-in-class fleet maintenance culture focused on safety, reliability, and precision execution. Backed by national corporate support and modern diagnostic infrastructure, our shop maintains the assets that power some of the most recognized luxury and tourism experiences in the NYC market. Job Description We are seeking a highly disciplined, hands-on Fleet Maintenance Manager to command daily maintenance operations for our commercial passenger fleet based in Queens, NY. This is not a passive desk job; it is a high-impact, execution-focused role requiring sharp leadership, technical vehicle fluency, and an unwavering focus on fleet uptime. Reporting directly to the National Fleet Manager, you will lead our local technician teams, strategically prioritize mechanical throughput, and guarantee that our assets meet absolute safety, compliance, and brand standards before rolling out onto the streets of New York City. Core Responsibilities • Shop Throughput & Fleet Uptime: Direct all day-to-day operations of the Queens maintenance facility to ensure maximum fleet readiness and zero missed departures., • Personnel Leadership & Accountability: Supervise, schedule, and coach a team of diesel technicians. Hold frontline staff strictly accountable to efficiency metrics, repair safety, and labor hour targets., • Real-Time Triaging: Dynamically assign and prioritize preventative maintenance (PM), diagnostics, heavy-duty electrical troubleshooting, and emergency work orders based on live operational demand., • DVIR & Compliance Ownership: Review, action, and close out all driver-reported DVIRs (Driver Vehicle Inspection Reports) daily to guarantee mechanical safety., • Data & Work Order Management: Oversee the complete lifecycle of all digital work orders, tracking labor hours, parts allocation, technician productivity, and asset repair histories in real time., • Live Driver Support: Act as the primary point of contact for drivers experiencing on-road issues; provide clear, composed troubleshooting support via phone and coordinate rapid-response roadside assistance or towing vendors if required., • Shop Administration & Compliance: Manage local shop scheduling, employee timekeeping, tool/facility maintenance compliance, and payroll-related reporting.Job QualificationsThe Non-Negotiable, • The Grid-Lock Schedule: Absolute, uncompromised commitment to a permanent Thursday through Monday shift. This is a high-volume, peak-weekend operation. Complete dependability and responsiveness during these specific days are absolute conditions of employment., • The 50+ Hour Requirement: This is a senior operational leadership role, not a punch-the-clock desk job. Successfully managing fleet throughput, DOT compliance, and a 24/7 transit network requires a minimum commitment of 50 or more hours per week.Professional Experience & Leadership, • Fleet Management Experience: 5+ years of progressive experience as a Fleet Maintenance Manager, Shop Supervisor, Lead Inspector, or senior-level heavy-duty shop foreman., • Personnel Command: Proven track record of managing, scheduling, coaching, and holding a crew of technicians strictly accountable to repair safety, quality, and workflow productivity metrics., • Technical Foundation: Strong preference for candidates who have a proven background as a heavy-duty diesel technician or shop foreman prior to moving into management. Must possess the ability to read diagnostic data, audit repair quality, and confidently troubleshoot mechanical issues over the phone with drivers., • Tech-Savvy Operations: Direct proficiency utilizing digital Fleet Management Systems (FMS), creating/tracking electronic work orders, managing parts inventory, and navigating modern shop productivity dashboards.Highly Preferred (The Competitive Edge), • Passenger Transit DNA: Prior experience managing maintenance operations specifically for motorcoaches, commercial transit buses, luxury charters, or shuttle fleets. (Strong background with Van Hool architectures is a major plus)., • NYS DOT Passenger Bus Regulatory Fluency: Deep familiarity with NYS Department of Transportation (NYSDOT) passenger bus inspection regulations, safety criteria, and out-of-service mandates. Experience preparing an over-the-road passenger fleet to pass semi-annual DOT garage inspections is highly valued., • Component Mastery: Strong diagnostic and mechanical familiarity with Cummins ISM / ISX / X15 engines, heavy-duty exhaust aftertreatment systems (DPF/SCR), and ZF EcoLife / AS Tronic transmissions., • Commercial Driving Foundations: An active or previously held CDL (Class A or B) with a Passenger Endorsement to ensure a driver’s perspective and safely assist with asset spotting/positioning within the yard.Working Conditions & Physical Requirements, • Ability to work comfortably in a fast-paced, semi-outdoor shop environment subject to seasonal New York weather variations., • Ability to physically inspect vehicles, including standing, bending, and occasionally assisting with asset spotting within the yard.Compensation & Benefits, • Compensation Range: $115,000 - $135,000 per year (commensurate with senior-level leadership and asset management experience)., • Bonus Structure:

Provides timely, quality maintenance for FedEx vehicle fleet and ground support equipment which requires preventative maintenance, troubleshooting, repairs, modifications, and documentation. Documents work and maintains adequate inventory using FedEx computer systems. Ensures work is in accordance with OSHA and DOT standards. Guides and supports a staff of technicians and trainees. Performs other duties as assigned. High school diploma/GED. Vocational training from an accredited automotive-related vocational school preferred. ASE Master certification preferred. Four (4) years fleet, automotive or truck vehicle advanced technical repair and maintenance experience. Experience with welding and basic D.C. electrical troubleshooting preferred. Knowledge of the use and operation of all equipment and testing equipment, gauges and tools normally associated with the troubleshooting and repair of hydraulic, gasoline, diesel, electric, and/or hybrid motorized equipment. Proficient skills in operating a personal computer. Demonstration of teamwork and interpersonal skills. Ability to read and speak the English language sufficiently to understand traffic signs, communicate with traffic safety officials and to respond to official inquiries and directions in accordance with FMCSA enforcement guidance. Possession of basic set of automotive hand tools including metric sizes. Must be able to lift 50 pounds and maneuver any weight above 50 pounds with assistance on a regular basis. Ability to work without supervision for extended time periods. Must be able to work in noisy, non-air-conditioned/heated work area. Ability to work in a constant state of alertness and in a safe manner. Must be willing to work any shift. Must possess a valid driver's license in state of residence. Non-covered safety-sensitive position. The compensation listed reflects the pay range or rate of pay reasonably expected for this posted position upon hire. Actual pay is determined by several job-related factors permitted by law and relevant to the position, including, but not limited to, experience relative to the job, tenure, market level, pay at the location for this job, performance, schedule, and work assignment. In California, the compensation listed reflects the range or rate of pay reasonably expected for this posted position upon hire. In New Jersey, any compensable Security and Walk time will be paid to non-exempt/hourly employees at the state minimum wage. Federal Express Corporation is an Equal Opportunity Employer including, Vets/Disability. Reasonable accommodations are available for qualified individuals with disabilities throughout the application process. Applicants who require reasonable accommodations in the application or hiring process should contact recruitmentsupport@fedex.com. Applicants have rights under Federal Employment Laws: • Know Your Rights, • Pay Transparency, • Family and Medical Leave Act (FMLA), • Employee Polygraph Protection Act E-Verify Program Participant: Federal Express Corporation participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: • E-Verify Notice (bilingual), • Right to Work Notice (English) / (Spanish)

We are looking for physically fit candidates with good attention to detail for the position of diesel mechanic. The primary duties of a diesel mechanic include performing diagnostic tests on diesel vehicles to find faults, analyzing diagnostic test results and repairing or replacing engine, steering

Responsible for the safe and efficient transfer of petroleum products between barges, ships, and facilities including completion of bills of lading and gauge reports. The job responsibilities include, but are not limited to the following: • Monitor product level in tanks, operate diesel engines, operate cargo pumps, operate tank/pipeline valves, operate manual and hydraulic booms., • Communicate with foreign crews and oil facility personnel., • Adjust and secure barge lines., • Complete loading and discharge gauge reports. Inspect vessel for Coast Guard and state regulatory compliance., • Use of Air purifying respirator, Self-Contained Breathing Apparatus (SCBA), air monitoring equipment, hearing protection, VHF radio, hand tools, tow lines, high level alarms and thermometer., • Operates diesel engines, cargo pumps, hydraulic booms, cargo gear, gate valves, and butterfly valves., • Check oil and water in any equipment on board before putting in use., • General barge maintenance and cleanliness., • Hydrostatic testing of cargo hoses and piping., • Change engine oil and filters., • Splice barge lines and boom running gear., • Knowledge of company safety practices., • Previous experience as a tank barge PIC on oil barges required., • A valid Coast Guard Merchant Mariners Document with PIC endorsement., • A valid first aid/CPR certificate., • Valid TWIC., • Complete HAZWOPER training within 30 days of hire., • Must have physical ability to maneuver cargo hoses, handle barge lines and board vessels by use of an Accommodation ladder, Jacob's ladder or tugboat., • Knowledge of Coast Guard and state requirements for transfer operations., • Must possess good communication skills by voice and/or visual hand signals., • Ability to complete accurate paperwork. Knowledge of basic math skills (add, subtract, multiply, and divide)., • Ability to think and respond quickly to emergency situations (oil spills, mechanical failures, etc.)., • Participate in onboard drills with tug crews when job permits., • Must be self-motivated and able to work independently and without direct supervision., • Ability to maintain professional relations with customers., • Valid state driver's license., • Must be able to perform the functions set forth in the attached job analysis and possess the stamina to work long hours., • Must be able to read, speak, and understand English over telephone and/or radio., • Exposure to all weather conditions (rain, ice, snow, heat, wind, heavy seas, etc.), • Must not be afraid of heights., • Shared responsibility for galley chores, services and meals along with all crew members aboard., • Ability to adapt to a variety of schedules and hours., • Able to work weekends, holidays, and at night. Willing to take call outs. Centerline Logistics is a leading provider of marine transportation services in the United States. Centerline Logistics operates on the United States West Coast (including Alaska and Hawaii), United States East Coast (including Puerto Rico), the United States Gulf Coast and the Mississippi River System. Services provided include the transportation and storage of petroleum products, tanker escort, ship assist, the transportation of general cargo and rescue towing. Centerline Logistics is the parent company of eight businesses specializing in marine services and a bulk liquids terminal business. Centerline Logistics provides accounting, administrative, human resources, safety and environmental services, and other support to the subsidiary companies. The Company offers Medical, Dental, Vision, Life and AD&D options to our employees and their eligible dependents after meeting Company requirements. 401(k) options, Disability Insurance, sick pay, vacation pay, 10 paid holidays per calendar year (subject to work schedule) and Healthcare and/or Dependent Care FSAs are also available to our employees after meeting Company requirements. All benefits information may be subject to change based on any current or updated benefit plan year changes and/or Collective Bargaining Agreements. We are an Equal Employment Opportunity and Drug Free Work place. Pre-employment drug testing is required.

Job Description COPPER FABRICATOR APPRENTICE Are you mechanically-inclined, enjoy working hard, and looking for job security for life? This chance to become a Master Copper Fabricator and revive a lost art is for you! OVERVIEW Job Title: Copper Fabricator ApprenticeLocation: Keyport, NJSchedule: Monday-Friday, Day Shift. No weekends. 8-Hour Shifts plus overtime opportunitiesSalary Range: $28-$30/hour. Total Compensation Package: Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTORequired Experience: Hands-on mechanical experience required. No copper fabrication experience necessary. We are looking for someone who is good with their hands, enjoys figuring out how things work, and takes pride in working hard to get the job done right. RESPONSIBILITIES • Learn to read and interpret mechanical drawings and blueprints, • Cut, bend, and form copper tubing to precise dimensions using basic shop math and geometry, • Braze copper joints using an oxy-acetylene torch, • Assemble precision induction heating coils and components, • Follow strict quality control and inspection procedures, • Cross-train and assist with other builds on the shop floor as needed, • Maintain a safe, clean, and organized work area REQUIRED QUALIFICATIONS • Strong mechanical aptitude: you're good with your hands and enjoy troubleshooting, building, and fixing things, • Excellent attention to detail and a commitment to quality work, • Willingness to learn and take direction from experienced craftsmen, • Dependable attendance and a strong work ethic, • Comfortable with basic shop math (measurements, fractions, simple geometry), • Valid driver's license, • Lawful permanent resident or U.S. citizen, • Ability to pass a background check and drug screen PREFERRED QUALIFICATIONS These are nice to have, but not all necessary. Please still apply even if you don’t check all of these boxes. • HVAC or refrigeration experience, • Automotive or diesel mechanic experience, • Military mechanical or maintenance background (e.g., tracked or wheeled vehicle mechanic, aircraft maintenance), • Brazing, soldering, or fabrication experience. MIG/TIG is a plus, but this role is primarily brazing, not welding., • Blueprint reading, • Mechanical assembly or manual machine shop experience ABOUT THIS OPPORTUNITY: A family-owned manufacturer of induction heating systems is looking for its next Copper Fabricator. The company builds equipment used across aerospace and industrial manufacturing, and the copper coils at the heart of these systems are built by hand. The skill is specialized enough that it isn't taught in trade school. It's learned at the bench from experienced craftsmen, and that's exactly what this apprenticeship offers. You'll train alongside a master fabricator to cut, form, and braze copper tubing into precision induction coils. Most apprentices build these skills within 6–12 months, with a significant pay increase when they advance to Master. This is a hands-on, shop-floor role focused on the craft: growth here means mastering the trade and earning more for it. The team is small and close-knit, and people stay for the long haul; most team members have retired from here. Benefits Paid on-the-job training, a significant pay increase upon advancing to Master Fabricator, employer-funded retirement plan, year-end bonus, health and dental insurance, sick days, and PTO Human-First Hiring. When you apply, your resume will always be reviewed by our team of real recruiters — not an AI screening bot. MILITARY VETERANS & MILITARY SPOUSES — YOU BELONG HERE Blue United Sourcing is a Veteran-Owned Small Business, and we actively recruit from the military community. You are strongly encouraged to apply. Don't fit the criteria for this role? Join our Talent Network to be matched with future job openings that fit your experience and career goals. Blue United Sourcing is proud to be a Veteran-Owned Small Business. Learn more: www.blueunitedsourcing.com Follow us on LinkedIn.

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

United Rentals - - Responsibilities: Maintenance and repair of mechanical, electrical, hydraulic, and diesel systems on equipment; Document service work and maintain records; Occasional travel to customer sites; Demonstrate equipment for customers; Assist with pickup/delivery of equipment and parts.

In this Stock Associate role, reporting to the Store Manager, maintaining inventory levels, organizing stockrooms, and ensuring products are properly stocked on the sales floor. Keep stockroom clean, organized, and free of hazards. Work with sales associates and managers to fulfill stock requests.

This is a high-impact, growth-oriented sales role for a driven professional who wants to build business, expand customer relationships, and win new planned maintenance contract opportunities for generator sets and fire pumps. The position supports industrial, commercial, medical, higher education, and government/municipal customers across an assigned territory and plays a key role in driving revenue growth and market expansion for Atlantic Detroit Diesel-Allison (ADDA). Salary Range: Base salary of $70,000-90,000 annually, plus uncapped commission, auto allowance, and mileage reimbursement. • Drive new planned maintenance contract sales for emergency generators and fire pumps by using a consultative approach, identifying customer pain points, and positioning solutions that protect critical operations., • Create and grow new business through prospecting, networking, relationship building, and consistent territory development., • Expand ADDA's market presence in New York City, with a primary focus on Manhattan and the Bronx, by opening doors, building credibility, and reinforcing our position as the preferred OEM service provider., • Build and manage a strong pipeline of prospects and active accounts, maintaining accurate customer contact and equipment information., • Own territory performance by meeting or exceeding sales goals and forecast expectations set by the department and organization., • Support the branch in addressing and resolving customer concerns, issues, and complaints., • Represent ADDA in the market through sales calls, customer meetings, and trade events while staying ahead of industry trends and competitive activity., • Conduct all business activities ethically and professionally., • Valid driver's license with a clean driving record, • Strong verbal and written communication skills with the confidence to engage customers and create opportunities, • Ability to work effectively with a wide range of personalities and individuals, • Ability to build strong, trusted relationships with customers and internal partners, • Self-starter with strong initiative, personal accountability, and the drive to build and grow a territory Education/Experience: High school diploma or GED required. Experience in power generation, industrial service sales, or outside sales is preferred. We will also consider self-motivated recent college graduates who bring strong sales potential, energy, and a willingness to learn the business. Computer Skills Proficient in Microsoft Office applications, including Word, Excel, Outlook, and Teams. Salesforce experience is highly preferred. Benefits include medical, dental, and vision coverage; paid vacation, sick time, and holidays; a flexible spending account; life and disability insurance; an employee assistance program; and a 401(k) with a 3% company match. ADDA is an equal opportunity employer and considers all qualified applicants, including protected veterans and individuals with disabilities.

The Chief Marine Engineer (Diesel) is responsible for supervising and directing the operation and maintenance of the Bureau's marine vessels. Coast Guard apply to the position of Chief Marine Engineer (Diesel). Chief Marine Engineer (Diesel) are subject to random drug testing during their employment

While retaining always its DNA, in recent years Diesel has evolved into the world of premium casual wear, becoming a true alternative to the established luxury market. Diesel is a truly worldwide organization. Who you are: A Brand Ambassador that has a passion for premium denim and Diesel culture.

Previous experience as a Welder / Yellow Mechanic. We are looking for a Welder - Yellow Diesel Mechanic to join our team! You will be responsible for repairing various vehicles and equipment.

Gerdau in Dyersburg, TN seeks a CDL A Driver to safely operate diesel straight trucks and tractor/trailers, delivering steel products to suppliers and customers. The position offers weekday day shifts, home every night, and a competitive hourly wage of $28.

Related experience may include: Shop Mechanic, Mechanic, Technician, Service Foreman, Service Manager, Shop Manager, Mechanic Supervisor, Technician Supervisor, Lead Mechanic, Lead Technician, Diesel Technician, Diesel Mechanic, Service Technician, Heavy Equipment Mechanic, Hydraulic Technician, Hyd

FedEx - - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment; Perform preventative maintenance, troubleshooting, repairs, modifications, and documentation; Operate and interpret testing gauges and tools for hydraulic, gasoline, diesel, electric

Perform minor adjustment and repairs on various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Fan clutches, Engine electronics, Diesel steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clu