Director of engineering jobs in Garden City, New YorkCreate job alerts

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionJob Description Hours: Full-Time Position – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 Only candidates who are permanent in the Administrative Engineer title or those who are reachable on the DDC promotional list (exam #1506), or the open-competitive list (exam #1122) may apply. Please indicate a copy of your Notice of Result card or indicate if you are already permanent in the title. If you do not meet the previously mentioned civil service criteria, you will not be considered for an interview. The NYC Department of Design and Construction, Public Buildings Division, seeks a Deputy Director. The selected candidate will be responsible for supervising a team of project directors and project managers, overseeing the design and construction of capital projects, resolving project issues, and ensuring that each project meets critical target dates and is within budget. Other key responsibilities include assuring the implementation of, and adherence to Public Buildings’ policies and procedures, interfacing with the sponsor agency, assisting with any approvals and permitting needed, and preparing consultant and contractor performance evaluations. In addition, the Deputy Director will assist the Assistant Commissioner and Program Director in developing the Unit’s Commitment Plan and meeting the KPI. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADM ENGINEER (NON MGRL) - 1001A Qualifications 1. A valid New York State License as a Professional Engineer., 2. Six (6) years of full-time satisfactory experience in chemical engineering, civil engineering, electrical engineering, environmental engineering, mechanical engineering, or plan examining work, at least two (2) years of which must have been in an executive, managerial, or administrative capacity. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job DescriptionDirector of Sales – Aerospace Division Department: Sales & Business Development, Aerospace Reports To: Global Vice President, Aerospace Location: In Office – Garden City, NY Salary: 130k-150k + bonus. Could consider some flexibility based off candidate years of experience Position Summary The Director of Sales, Aerospace Division, will lead the aerospace sales strategy, driving growth in both domestic and international markets. This role requires a results-driven leader who combines strategic vision with hands-on execution. The Director will manage a team of sales professionals, deepen customer partnerships, and develop innovative go-to-market approaches that strengthen the company’s position in the aerospace supply chain. Key Responsibilities * Develop and execute the aerospace sales strategy aligned with business objectives * Lead, coach, and mentor a high-performing sales team to achieve revenue and profitability targets * Build and strengthen long-term customer relationships with OEMs, MROs, and global supply chain partners * Identify and capture new business opportunities in emerging aerospace markets * Collaborate with internal stakeholders (Operations, Procurement, Engineering, Finance) to deliver customer solutions efficiently and profitably * Monitor market trends, competitive activity, and customer needs to inform product and service strategies * Drive sales forecasting, pipeline management, and performance reporting * Represent the company at key industry events, trade shows, and professional associations * Champion a culture of integrity, collaboration, and continuous improvement Qualifications & Experience * Bachelor’s degree in Business, Engineering, Aviation Management, or related field (or equivalent experience) * 10+ years of progressive sales leadership experience in aerospace or related industries * Proven success in managing complex customer relationships and negotiating long-term contracts * Strong leadership, coaching, and team development skills * Demonstrated ability to analyze market data, develop strategy, and deliver results * Excellent communication, presentation, and relationship-building abilities Preferred: * Advanced degree (MBA or equivalent) * Experience with bearings, precision components, or aerospace supply chain solutions * Familiarity with global distribution models and export compliance requirements * Experience leading sales teams in family-owned or growth-focused organizations Core Competencies * Strategic and Commercial Acumen * Customer-Centric Mindset * Inclusive Leadership and Talent Development * Results Orientation and Accountability * Change Agility and Innovation * Strong Collaboration and Cross-Functional Influence What We Offer * Competitive salary and performance-based incentives * Comprehensive company-paid health, wellness, and retirement benefits and a pension plan * Professional development and career growth opportunities * Inclusive, values-driven culture Commitment to Diversity, Equity & Inclusion We are committed to building a diverse, equitable, and inclusive workplace. We welcome applicants from all backgrounds, experiences, and perspectives, and are dedicated to ensuring that every team member has the opportunity to thrive. If you require accommodation during the application or interview process, please let us know. Pay Details: $130,000.00 to $150,000.00 per year Search managed by: Cara Kelly Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Network Infrastructure Manager About the job We’re the new terminal at John F. Kennedy International Airport, a bold and exciting project to develop a world class, international terminal that can serve as a global gateway to the New York metropolitan area and the greater United States. The $9+ billion first phase is the largest single asset project financing in US history. The first set of new gates are expected to open in 2026. We will set a new standard for design and service and aspires to obtain a global Top 5 Skytrax rating as one of the finest ten airport terminals in the world. The new terminal will be: • A 23-gate, state-of-the-art, international-only terminal, • Sustainably designed and future focused, • Featuring expansive, naturally lit public spaces, • Cutting edge technology and an array of amenities, • Designed to enhance the customer experience, • Compete with some of the highest-rated airport terminals in the world Who you are: As the Network Infrastructure Manager, you are an accomplished leader with a robust background in network and IT infrastructure management. You possess deep technical expertise in CISCO network infrastructure, including LAN/WAN, VoIP, routers, switches, wireless, ISPs, firewalls, and security devices. You have a proven track record in managing Data Center network operations and overseeing sub-contracted technical resources. Your experience spans both Terminal and Enterprise networks, and you are adept at ensuring the high availability, performance, reliability, scalability, and effectiveness of network and computing systems. What are we looking for: We seek a driven Network Infrastructure Manager who will ensure the delivery of quality and responsive services through ongoing preventative maintenance, assessment, and proactive monitoring. Reporting into the Network Infrastructure Director, you will be responsible for the optimization and management of our network infrastructure, aligning IT strategies with the company's objectives. Your ability to develop and enforce policies, manage ITIL processes, and provide leadership in IT disaster recovery and business continuity planning is crucial. Your skills in collaborating with results-driven teams and managing network security measures are essential for our organization's success. What you will be doing: • Overseeing the management of all network operations, including Terminal and Enterprise networks., • Ensuring operational high availability and effectiveness of network systems, both on-premises and in the cloud., • Developing and shaping a comprehensive IT infrastructure strategy., • Maintaining and ensuring the integrity of our IT infrastructure and fiber backbone., • Implementing, upgrading, and maintaining server and storage systems, and establishing service level agreements., • Delivering network engineering and design support and providing technical expertise., • Coordinate with vendors, contractors, and internal teams for project planning, execution, and documentation., • Updating and managing IT Disaster Recovery and Business Continuity Plans., • Coordinating with the Director of Cyber Security to implement network security measures against cyber threats., • Performing additional tasks as required to support the organization's needs. Skills, Knowledge, and Experience: • Extensive experience in networking, including VPNs, DDI, load balancers, and network security, ideally with Cisco, Palo Alto, F5, and Infoblox and VoIP technologies., • Strong experience with Cisco DNAC, ISE, and network management tools, • A solid foundation in Software Defined Networks such as Cisco SD-Access, AC, and controller-based WLAN, • Cisco Certified Network Professional (CCNP) or equivalent., • Airport/aviation experience is a plus., • Self-driven, critical thinker with strong relationship-building skills., • Ability to work under pressure and focus on customer needs with high emotional intelligence., • Excellent organizational, communication, and computer skills, including proficiency in Jira, SharePoint, and Microsoft Office Suite., • A minimum of 7 years' experience in network infrastructure management, with relevant certifications in Cisco technologies., • Experience supporting VMware, Active Directory, Azure, and M365 Where will you work: Hybrid on-site in Jamaica Queens. As we progress towards its operational phase, your role will transition to the vibrant and dynamic environment of JFK International Airport. What do we offer: • Medical, • Dental, • Vision, • HSA/FSA, • Group Life and Accidental Death and Dismemberment, • Short and Long-Term Disability Insurance, • 401k matching, • Comprehensive online training program, • Discount and Perks through partner programs please send your resume and salary requirements to:

Job Description ABOUT US New York Edge is the largest provider of after-school and summer camp programs in New York City public schools. Each year, academic programs—including STEM, the arts, sports and wellness, and college access—help 40,000 students develop leadership skills and succeed in school. Working parents count on our programs to provide safe and enriching environments for their children. SUMMARY Extended Day Activity Instructors lead afterschool programming for children and teens at New York Edge after-school program sites. The STEM activity instructor has a dual reporting role, supporting the curriculum and instruction department team by designing lesson plans and implementing curricula across New York Edge program sites. They will also support the program director by preparing STEM-based activity materials and explaining principles, techniques, and safety procedures to student participants. Schedule: Part-Time Monday – Friday 2:00 pm – 6:00 pm (Days/shifts vary depending on site needs) This role requires you to be in person. ESSENTIAL JOB FUNCTIONS * Build strong relationships with and among students * Teach or co-lead daily activities * Learn and facilitate STEM curriculum, including Math, Robotics, Science, Coding, Technology and/or Engineering. * Establish clear objectives for all lessons, units, and projects and communicate those objectives to students. * Participate in ongoing professional development activities * Prepare materials for daily activities * Adapt teaching methods and instructional materials to meet students' needs and interests. * Support the coordination of program events * Input data and prepare reports * Administer pre and post-assessments and evaluations for student activities QUALITIES WE’RE LOOKING FOR * Demonstrated ability to lead activities with children and teens * Creativity * Must have excellent communication, organizational, and time management skills * Experience working with children and teens * Ability to multitask and manage workflow in a fast-paced environment * Ability to establish and maintain effective working relationships with program staff, school personnel, parents * Sensitive to social-emotional needs and characteristics of students * Self-starter who takes initiative * Flexibility, reliability, and sound judgment * Other duties as assigned REQUIREMENTS * High School Diploma or equivalent * Must be at least 18 years of age * College credits in computer programming, engineering, education, math, science and/or similar related degrees are highly preferred * Must be knowledgeable and skilled in a variety of STEM activities and have prior experience successfully teaching and instructing youth * Experience working with children strongly preferred * May be required to walk up and down stairs. * May have to lift or move objects/materials as needed. * Work is permitted mostly within a New York City Public School but may be required to interact with community-at-large during trips or events. Specialists will be required to report to the school building and interact with staff, students, parents, and school administration. At the time of offer and acceptance, the job requires safety and security clearances through the Department of Education and the Department of Health. To apply, please visit our website at newyorkedge.org/careers. New York Edge is an Equal Opportunity/Affirmative Action Employer. Disclaimer: The statements herein are intended to describe the general nature and level of work the employee performs in this position. These statements are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of a person in this position.

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department. Required Skills and Abilities: • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills. Education and Experience: • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Physical Requirements: • None Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Director of Manufacturing to lead aerospace manufacturing operations, drive continuous improvement, and manage production teams. What is needed: • Bachelor's degree in engineering or related technical field; MBA preferred., • Minimum 8 years of experience in manufacturing, including managing staff., • Experience with continuous improvement methodologies like LEAN and Six Sigma., • Familiarity with assembly, welding, brazing, machining processes., • Experience in build-to-order manufacturing management in medium volume/high-mix environments, preferably aerospace or military industries., • Proficiency in MRP systems, preferably Oracle., • Fluency in Spanish preferred., • US person- sponsorship not offered now or in the future What you will do: • Support business goals related to product cost, quality, schedule adherence, and delivery., • Develop standard processes for manufacturing heat exchangers using standard work formats., • Design tooling and fixtures for production processes., • Drive continuous improvements using process improvement methodologies like LEAN and Six Sigma., • Monitor performance standards for product quality; recommend process improvements., • Oversee Operational Excellence plans and coordinate projects at a tactical level., • Provide technical support regarding process improvements and non-conforming parts. Benefits: Health Benefits: • Medical Plan • Telehealth • Prescription Drug Program • Employee Assistance Program (EAP) • Dental Plan • Vision Plan Financial Benefits: • Retirement Plan with company match • Paid Time Off • Health Savings Account and/or Flexible Spending Accounts • Life and AD&D Insurance • Disability Insurance (Short and Long Term offerings Equal Opportunity Employer/Veterans/Disabled Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits and 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State or local law; and Holiday pay upon meeting eligibility criteria. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs which are direct hire to a client To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ___ The Company will consider qualified applicants with arrest and conviction records

Job Description Director of Manufacturing - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical-related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years of experience in a manufacturing environment, including managing salaried and hourly staff., • Minimum 5 years of experience using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director of Manufacturing Engineering (ME Director) is responsible for supporting business goals, including product cost and quality, schedule adherence, and timely delivery to meet customer demand. It is a hands-on position responsible for ensuring that manufacturing processes, tooling, and equipment support the business's Safety, Quality, Delivery, and Productivity goals. This ME Director plays an integral part in plant operations, special projects, and is responsible for developing and maintaining a motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES • The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain, and Production in support of the departmental objectives. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Responsible for developing the standard processes used to manufacture heat exchangers, including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible for ensuring all production processes are defined using the standard work formats and templates, as well as creating any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics, including quality, yields, cycle time, productivity, and cost. Promote process improvement, LEAN manufacturing methodologies, and 5S processes., • Implement and drive continuous improvement activities through the implementation ofthe change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements/quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment and tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for the entire department., • Provide oversight for manufacturing activities in our Mexico facility., • Minimal travel expected. Potential travel to a facility in Mexico in support of overall business objectives. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical, along with longer-term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems, preferably Oracle., • Proficient in Microsoft Office programs, including Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies, including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction, and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionJob Description Hours: Full-Time – 35 Hours Work Location: 30-30 Thomson Avenue, LIC, NY 11101 All interested candidates who apply meet the minimum qualification requirements cited below are encouraged to apply. Please indicate on your Cover Letter if you are working for a NYC agency as a permanent Administrative Architect. Applicants who are not permanent in the Administrative Architect title are required to file for the promotional Administrative Architect exam#6501 and/or the open-competitive Administrative Architect exam#6001. The filing period to apply for these exams will be open from September 3, 2025, to September 23, 2025. Please visit the NYC DCAS exams page for more information - . The Program Executive will work with the Director of Front-End Planning to bring clarity to the project initiation process through well-developed planning and review of client needs and existing conditions, resulting in the creation of Front-End Planning Reports. Duties also include conducting surveys and interviews with client agencies, and coordinating with cost estimators, risk analysts, and time schedulers. In addition, collaborate with City agencies and DDC professionals to perform existing conditions reports, scope development and verification, funding analysis, risk analysis, and scheduling. The goal is to perform a broad-minded analysis and develop a comprehensive understanding of the capital needs of each client agency project to facilitate successful delivery in a safe, expeditious, and cost-effective manner, while maintaining the highest degree of architectural, engineering, and construction quality. Authorization to work in the United States is required for this position. NYC Department of Design and Construction does not provide sponsorship for international employees for visa applications, extensions, or status changes, including STEM/OPT visas. Applicants are responsible for ensuring that they meet all qualifying requirements for this position, at the time of application. All applicants, including City Employees: Please go to NYC Government Jobs | Explore Careers | City of New York, go to Search for Open Jobs, and type in the Job ID # listed above. Submit job application as prompted. Do not apply via Employee Self-Service (ESS), e-mail, mail, or fax your resume to DDC directly. ADMIN ARCHITECT (NON MGRL) M-1 - 1000A Qualifications A valid New York State Registration as an Architect is required. In addition, candidates must have six ( 6 ) years of full-time paid experience in architectural work, at least two (2) years of which shall have been as an administrative architect. Additional Information The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Job Description Position Summary: Collins Building Services (CBS) is seeking an experienced, highly organized Building Manager to oversee daily facilities operations for a portfolio of 11 academic buildings in a college campus setting. This leadership role is responsible for ensuring the highest standards of service, safety, and efficiency across janitorial and trades functions. The Building Manager will serve as the primary liaison between CBS and campus departments and will work closely with union staff, vendors, engineering, and key university stakeholders. This position reports directly to the Assistant Director of Operations and plays a critical role in upholding the client’s expectations, driving team performance, and supporting overall campus functionality. Key Responsibilities: Portfolio & Staff Oversight • Manage all daily operations across a portfolio of 11 academic buildings., • Supervise and coordinate the work of 32BJ Janitorial staff and Trades Union employees within the assigned buildings., • Ensure all building staff are operating in compliance with CBS protocols, union agreements, safety standards, and university policies., • Serve as the day-to-day point of contact for university stakeholders, including:, • Campus Facilities & Services, • Conference Services, • Design and Construction, • Deferred Maintenance Departments, • Foster positive client relationships by providing consistent communication, responding to concerns in a timely manner, and participating in campus meetings., • Coordinate and monitor work performed by third-party vendors, contractors, and service providers., • Support the planning, execution, and close-out of deferred maintenance projects, minor construction, renovations, and special events preparation., • Assist in developing and managing budgets related to supplies, staffing, maintenance, and contract services., • Track operational costs and recommend cost-effective measures without compromising service quality. Qualifications: • Education: Associate’s or bachelor’s degree in Facilities Management, Operations, Business Administration, or a related field preferred., • Experience: Minimum 3–5 years of experience in building management, facilities operations, or a similar role. Higher education or unionized environments strongly preferred. Working Knowledge of: • Janitorial, maintenance, and trades operations, • Union labor relations (especially 32BJ and skilled trades), • Facility systems (HVAC, plumbing, electrical), • OSHA regulations, safety standards, and emergency response Skills: • Strong leadership and interpersonal communication, • Proficient in Microsoft Office Suite; experience with CMMS platforms a plus, • Ability to manage multiple priorities in a fast-paced environment, • Problem-solving, budget oversight, and team coordination Working Conditions: • This is a full-time, on-site position at a college campus., • Requires walking and inspecting multiple buildings daily., • May include occasional evening or weekend responsibilities, especially during university events or emergencies.Company DescriptionAbout: Collins Building Services (CBS) is proud to be a leading firm in facility management throughout the New York Tri-State area for over 30 years. Clients choose us for our commitments of superior quality service, transparency, and innovation, tailored to their individual needs. With over 3,200 employees, Collins Building Services’ operations team is responsible for providing the excellent service that has been recognized throughout the industry. This is a unique opportunity to join an established company that is investing in constant innovation, turning customer feedback into actionable insights for business success and solutions. If you want to work for a company that’s focused on providing you the best experience with a continued focus on your personal growth and development – join the CBS Operations Team! Collins Building Services provides equal employment opportunities to all employees and applicants. The Company does not discriminate in employment opportunities or practices on the basis of race, creed or religion, color, national origin, sex, age, disability or handicap, marital status, military or veteran status, sexual orientation, citizenship or citizenship status, or any other characteristic protected by federal, state, or local law.About:\r\n\r\nCollins Building Services (CBS) is proud to be a leading firm in facility management throughout the New York Tri-State area for over 30 years. Clients choose us for our commitments of superior quality service, transparency, and innovation, tailored to their individual needs. With over 3,200 employees, Collins Building Services’ operations team is responsible for providing the excellent service that has been recognized throughout the industry.\r\n\r\nThis is a unique opportunity to join an established company that is investing in constant innovation, turning customer feedback into actionable insights for business success and solutions. If you want to work for a company that’s focused on providing you the best experience with a continued focus on your personal growth and development – join the CBS Operations Team!\r\n___________________________________________________________________\r\n\r\nCollins Building Services provides equal employment opportunities to all employees and applicants. The Company does not discriminate in employment opportunities or practices on the basis of race, creed or religion, color, national origin, sex, age, disability or handicap, marital status, military or veteran status, sexual orientation, citizenship or citizenship status, or any other characteristic protected by federal, state, or local law.

Bachelor's degree in engineering or related technical field; MBA preferred.

The Wikimedia Foundation, the non-profit that hosts Wikipedia and its sister projects, is seeking a deeply technical, outcome-oriented Director of Data to lead our work across data engineering, search, experimentation, and data-related site reliability engineering (SRE). Our data systems power every

Oversee platform engineering for security controls: VPAM/PKI, key management/HSM, log pipelines, DDoS, WAF, remote access, and network firewalls. As the Director of Cybersecurity Engineering, you will lead the strategic vision and implementation of advanced security frameworks, leveraging automation

Financial Benefits: Retirement Plan with company match Paid Time Off Health Savings Account and/or Flexible Spending Accounts Life and AD&D Insurance Disability Insurance (Short and Long Term offerings. Director of Manufacturing to lead aerospace manufacturing operations, drive continuous impro

The Director of Manufacturing Engineering plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership