Trabajos electrical training en Glen Cove, New YorkCrear alertas

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required., • Competitive wage (based on experience) plus Time and a half for Overtime., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k). We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $25.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Securitas Technology Corporation (STC) Technology and Solutions groups are experiencing tremendous success, and we currently have an Embedded Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. STC is a leading, global provider of integrated security and facility solutions that contain best-in-class products and award-winning services for an organization's unique needs. STC security solutions include product and service outsourcing that integrate cross-disciplinary functions into comprehensive technology-centered customer solutions on a cloud-based platform spanning hardware and software capabilities. Responsibilities • Services intrusion, CCTV, and access control security systems., • Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it’s in satisfactory working order., • Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs., • Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational., • May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations., • Presents a professional image both in personal and vehicle appearance., • Performs work assignments in a safe manner and within specified cost limits., • Promotes, builds, and maintains good customer relations and assists with contract retention., • Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements., • Keeps abreast of changes and new developments in products and technology., • Attends and completes training programs as requested. Job Requirements • High School diploma or GED required, Vocational/Technical Degree in electrical, security, or computer systems preferred., • MUST HOLD a minimum of 1-2 years of experience installing and/or servicing Access Control and CCTV, • Software House, • Lenel, • Avigilon, • Genetec, • ProWatch, • AXIS IP Cameras, • Door Hardware troubleshooting, • Automatic doors openers, • Video, • Camera Troubleshooting, • Lead Installation, programming, and maintenance of Honeywell ProWatch access control systems, • Configure, troubleshoot, and optimize Genetec Security Center and platforms, • Strong working knowledge of Windows Server and Client environments, • Strong working knowledge of Microsoft Office (Word, Excel, PowerPoint), • Strong written and verbal communications skills, • Working knowledge IP video and addressing, • Excellent problem solving and analytical skills, • Excellent time management skills, • Positive attitude and strong work ethic, • Climb ladders that extend up to 24 ft. in height., • Carry items up to 75 pounds., • Ability to work on-call on a rotational basis covering after hours & weekend emergency calls., • A valid state driver’s license, without restrictions, is required. Securitas Technology offers comprehensive benefits including: • Highly competitive salary, • Company training and industry leading certification program, • Company Vehicle, • Company Cell Phone, • Medical, Dental, Vision, and Life Insurance, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Execute and refine PM tasks; recommend changes to intervals and procedures., • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Location: Carle Place, NY 11514 (Long Island) Schedule: Mon- Fri 6:30-7am-3:30pm; no weekends or no on-call Supervisor: Administrator Salary: $130k-$150k Notes When do you expect to open? Mid-late March Reason for opening: New location Looking to Hire: ASAP (Ideally first two weeks in March) Interview process? • Meet with site admin, • Meet with the leadership Team, • Meeting with governing board members Flexible training period, will depend on candidate's prior knowledge, learn as you go since it's a new center Any direct reports? Nursing staff, techs in OR, environmental services staff, clinical coordinators, x- ray tech, sterile tech, MAs, and clinical coordinators Daily patient flow? Will be busy, ramp up might take a while EMR: Surgical Information Systems (SIS) Experience: Someone who is self-driven, asks questions when they need answers, willing to do the research and learning themselves, ASC exp in leadership/management, understand the workings of the OR, expectation of DON is that they become infection preventionist on-site while maintaining quality • Center is a multi-specialty center- Orthopedic, ENT, Ophthalmology, Urology, Endoscopy, Pain, and Spine, • Facility: 4 operating rooms (one dedicated GI room) Job Summary: Competent to fulfill the staff nurse positions in O.R., P.A.C.U., Pre- and Post-operative care and is responsible for the coordination of care provided in these units on a daily basis, collaborating closely with the Administrator. May utilize charge personnel in clinical areas as is deemed necessary. Responsibilities Assessment • Assesses staffing needs according to scheduled cases and patient needs and appropriate staff and skill mix., • Continuously assesses progression of the daily schedule and adjusts staffing assignments as needed to provide optimum patient care and productivity., • Assists Administrator in assessing in-service / educational needs of staff and makes recommendations., • Assesses equipment and supply needs based on scheduled cases. Assists in evaluation of new equipment and supplies. Remains in compliance with contract purchasing to the extent that clinical conditions allow., • Assists Administrator in monitoring employee performance by giving verbal input to and by documenting behaviors in a chronological format., • Assists the Administrator and staff in development of the Quality Improvement Program in the clinical areas. Coordinates collection of data and works collaboratively with the Administrator and staff to interpret data; and to plan and implement techniques for improvement., • Communicates assessments to the Administrator in a timely manner. Planning • Plans staffing according to identified needs and staffing pattern to meet physician needs, and communicates schedule to staff in advance., • Assists the Administrator in planning in-service/education experiences for staff. Assists staff members in planning to meet identified educational needs and goal achievement., • Plans to assure that needed equipment and supplies are available, in a timely manner, for scheduled cases. Implementation • Makes staffing assignments according to planned needs and available staff. Coordinates schedule and demonstrates flexibility when schedule or staffing availability changes. Arranges for provision of breaks and lunch for staff., • Assists Administrator in development and documentation of in-service/educational offerings for staff and physicians. Conducts regular education offering during monthly staff meeting., • Provides for needed equipment and supplies according to planned needs., • Assists Administrator in employee performance evaluations., • Monitors quality of patient care in units. Coordinates interventions and communicates outcomes to the Administrator., • Acts as a resource person to physicians, patients, staff, orientees, students, and visitors., • Communicates significant information to the Administrator in a timely manner.nCompletes written documentation as requested and/or per policy., • Facilitates decision-making and problem solving within the units., • In collaboration with the Administrator, facilitates achievement of unit goals which are in harmony with those of Administration, the Managing Member, and the Surgery Center Advisory Board., • Responsible for operations of the clinical units in the absence of the Administrator. Evaluation • Performs in a manner which demonstrates accountability, utilizing sound decision making skills and nursing judgement., • Participates in Quality Improvement Program activities including identification of aspects of care, collection and analysis of data, formulation of recommendations, and implementation of an improvement plan and evaluation of the process. Qualifications • Bachelor’s Degree in Nursing, • State of New York Nursing License, • Same as Registered Nurse Position Description with demonstrated strong clinical skills. Three to five years of progressively more responsible experience in a supervisory capacity with demonstrated leadership ability. Experience in an ambulatory surgery center environment preferred., • Excellent decision-making skills., • Excellent interpersonal communication skills and demonstrated ability to supervise others., • Ability to perform effectively in a variety of stressful situations in the peri-operative setting., • Demonstrates basic competencies related to the Center’s policies and procedures., • Demonstrates understanding of a Quality Improvement process. Working Conditions • Accountability to Administrator., • Normal peri-operative environment with exposure to chemical odors, cleaning solvents and other hazardous materials. Must follow established procedures to ensure safety., • Exposure to possible injury when working with electrical equipment and lasers which require care and following proper safety procedures.

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other The Technician III is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician III is a vital member of the Easy Ice service team, responsible for ensuring the optimal performance and reliability of ice machines through proficient cleaning, maintenance, troubleshooting, and installation. The ideal Technician III is results-oriented, driven by a passion for delivering exceptional customer service, and possesses a strong work ethic that inspires collaboration and excellence among colleagues. The Technician III will focus on maximizing equipment lifespan, minimizing service calls and emergency ice purchases, and ultimately enhancing customer satisfaction and loyalty. Key responsibilities include providing outstanding service and support during on-site visits, forging positive relationships with customers, managing installation and repair tasks, accurately diagnosing and resolving technical issues, training and support of less experienced technicians, and completing detailed service reports to improve future service quality. The Technician III will also maintain proper truck stock and supplies during field operations, maintain company vehicles in accordance with established policies, and uphold the Easy Ice brand image with professionalism and positive engagement. The successful candidate will embody a flexible, self-motivated approach to work, thrive in a fast-paced environment, and be dedicated to fostering a strong team dynamic while contributing to overall business growth and success. A successful Technician III will drive the following outcomes: • Deliver exceptional service that fosters positive relationships with customers, ensuring they are consistently satisfied with both the quality of service and the performance of their ice machines, • Perform thorough repair, maintenance, cleaning, and troubleshooting of ice machines to improve their performance and longevity, thereby reducing the frequency of service calls and emergency ice purchases, • Accurately diagnose and resolve technical issues on the first visit, minimizing downtime for customers and enhancing their overall experience, • Achieve or exceed performance metrics related to service response times, resolution rates, and customer feedback, demonstrating accountability and commitment to excellence, • Demonstrate flexibility in work schedules and adapt to changing operational demands while actively seeking opportunities for personal and professional growth within the fieldHow you will do it:, • The Technician III is a progression from Technician II. All levels of Technician - I, II, and III, are responsible for the cleaning and preventative maintenance of ice machine equipment as required, • Clean, maintain, troubleshoot and install Easy Ice equipment, with the goal to increase equipment life and reliability, reduce service calls, and reduce emergency ice purchases, • Diagnose machine performance problems or system errors down to the component, • Capable of replacing compressors, expansion valves, and any other refrigeration component, • Manage on-site, remote, and standard installation, repair, maintenance, and test tasks, • Train and mentor less senior technicians as required, • Provide service and customer support during field visits with a strong emphasis on building positive relationships with customers, • Manage on-site installation, repair, maintenance and test tasks, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards Experience: • 5+ years experience in the diagnosis and repair of commercial equipment (prior experience with refrigeration, electrical, HVAC, ice machines, or related equipment), • EPA 2 Certification, • Ability to demonstrate and train hot work, • Ability to train torch solder management, safety standards, and procedures, • Ability to demonstrate and train refrigeration diagnostics, • Ability to demonstrate and train electrical diagnostics, • Ability to demonstrate, install, and train operations on all ice machine brands, • Adept and ability to train and mentor less experienced technicians, • Demonstrate a high level of customer service and de-escalation skills, • High level of ability to work and problem solve independently, • Working knowledge of mobile tools and applications, • Experience in and the ability to demonstrate volt meter operations, • Ability to work a full-time schedule which includes a rotating on-call schedule, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing repair and maintenance issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • EPA 2 or Universal CertificationAdditional Required Attributes:, • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionPower-Flo Technologies is a temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for an HVAC Controls Mechanic to work independently in the field to startup, service, and support temperature control systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand), • Experience with ACAD, or similar CAD software, • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification, • Ability to read and interpret blueprints, specifications, and program/design to meet sequence of operations of both design/build projects as well as plan/spec projects Additional Necessary Qualifications • 3 years of building automation experience required, • Strong understanding of commercial HVAC systems operations, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook), • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools, • Mechanical aptitude required, • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams, • Valid and clean NYS Driver's License, • OSHA 30 and site safety training Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other, • Check us Out: Easy Ice What you will do: The Technician I is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician I is responsible for the installation, preventative maintenance, servicing, and cleaning of our ice machines. This role is critical in ensuring the optimal functionality and cleanliness of our equipment to meet our customers’ service requirements while operating with proficiency. The technician will assist in troubleshooting issues, conduct routine inspections, and execute scheduled maintenance tasks under the supervision of senior technicians. The ideal candidate will possess a keen attention to detail, a commitment to maintaining equipment in good working order, and a willingness to learn and grow within the field of ice machine repair and maintenance. The Technician I is dedicated to driving service success that not only enhances customer satisfaction but also maximizes customer retention through reliable and responsive service. A successful Technician I will drive the following outcomes: • Increase the effectiveness and efficiency of the customer service experience by cleaning, installing and or repairing machines properly the first time, every time, • Increase the effectiveness and efficiency of the customer service experience by maintaining the proper truck stock and vehicle cleanliness and organization standards, • Leave every machine serviced in a condition that makes it easier for other Technicians to follow, • The Technician I performs duties as assigned including the installation of equipment, bagging/delivery of ice, cleaning, repairing, and maintaining ice machines. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, and preventative maintenance of ice machine equipment as required, • Perform comprehensive servicing, installation, and thorough cleaning of ice machines per Easy Ice standard operating procedures to ensure optimal performance and cleanliness, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Identify and report any additional actions required to enhance customer satisfaction, including recommendations for parts replacement, cleaning, or equipment repairs, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards Education: High school diploma or general education degree (GED) Vocational/Technical Training preferred Experience: • 1-2 years of experience in a customer service-oriented technical role or equivalent combination of education and experience preferred, • Previous experience with ice machines or HVAC maintenance or similar equipment is a plus, • Basic understanding of mechanical systems and electrical components related to ice machines or similar equipment, • Familiarity with troubleshooting techniques and standard repair practices, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • Demonstrated track record of delivering highest level of customer satisfaction Additional Required Attributes: • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job Description Power-Flo Technologies is hiring an Entry Level Inside Sales Representative to write orders and guide our customers through product selection of our electrical supplies, electric motors, pumps, controls, power transmission equipment and HVAC controls. Salary Range: $18 - $28/hour (depending on direct industry experience) Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Responsibilities include but are not limited to the following: • Supporting outside sales staff by providing customers with proposals on their behalf., • Providing best in class customer service., • Providing product information and keeping regular vendor contact for various reasons i.e. expediting open orders., • Reaching out to customers on an as needed basis to inquire about potential future needs., • Will be up-selling customers who have called to place an order by suggesting additional products that could compliment their needs for the specific job that they are working on., • Working with credit department to inquire and help provide resolution to account financial status for customers. Requirements for the position include but are not limited to the following: • Must be able to handle a high call volume environment., • Must be committed to learning about our business and all the product lines, keeping up to date as well., • Excellent verbal and written communication skills., • Ability to remain professional and focused with customers on the phone and successfully conclude the call despite any challenges presented by the customer., • Must be a Self-motivated and sales driven individual., • Experience with our ERP System that is called Eclipse is a big plus., • Must be able to learn our Windows based and our text command-based ERP System., • 1 - 2 years of experience working with or for Electrical or HVAC contractors is highly preferred., • Valid and clean NYS driver's license to travel to training and to visit vendors (as needed). Physical Ability Requirements (with or without reasonable accommodation) • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies is the premiere provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for an experienced Inside Sales Representative (electrical and industrial products) to join our New Hyde Park location. The Inside Sales Representative is responsible for maintaining and growing existing accounts, making proactive inside telephone sales calls to potential new customers and supporting the outside sales team. Daily Tasks: • Responsible for supporting customers, outside sales, internal operations, and suppliers in all aspects of the pre-sale and post-sale processes, • Create sales quotes and follow up with customers to close orders, • Receive and process purchase orders, • Develop relationships with existing customers and new sales leads, • Reaching out to customers on an as needed basis to inquire about potential future needs, • Increase sales by generating new customers and selling additional products to existing customers, • Provide best in class customer service to our customers at all times, • Continued education - vendor training and product knowledge, • Well versed in product offerings PFT has to offer Qualifications: • 2+ Years of electrical, lighting, industrial or power distribution sales experience required, • Ability to multi-task must be strong with details and possess strong organizational skills, • Exceptional interpersonal and customer service skills, • Experience with Microsoft Office software, including Word and Excel (basic knowledge), • Epicor Solar Eclipse experience is a plus, • Ability to work well both independently and in a team setting, • Excellent written and verbal communication skills, • Problem solving and reconciliation skills necessary, • Valid and clean NYS driver's license Physical Ability Requirements (with or without reasonable accommodation) • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time Salary Range: $25.00 - $43.00/hour (depending on direct industry and product experience) Full-time, on-site. Monday-Friday Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Learn more about us here: Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Overview Electro Industries/Gauge Tech (EIG), a Division Of Hubbell Inc. has an opening for an experienced electronics assembler in our Westbury manufacturing facility. A Day In The Life Essential Functions: \n • Follows assigned manufacturing procedures to perform product assembly.\n, • Reports on issues, malfunction or defective parts to supervisor\n, • Ensures the assigned bench and work area are clean and organized\n, • Uses machinery/hand tools to perform job\n, • Maintain equipent/tools in good condition\n, • May perform other tasks as required by the Company\n\n What will help you thrive in this role? Qualifications: \n • Reasonable accomodations may be made to enable individuals with disabilities to perform the essential functions of the position.\n, • Must be dependable and responsible\n, • 1-3 years manufacturing experience\n, • Good Attendance is a MUST\n, • Good manual dexterity and hand-eye coordinator\n, • Mechanical abilities are a strong plus for this position as well as attention to details\n, • Good understanding of quality control principles\n Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Overview Electro Industries/Gauge Tech (EIG), a Division Of Hubbell Inc. has an opening for an experienced electronics assembler in our Westbury manufacturing facility. A Day In The Life Essential Functions: \n • Follows assigned manufacturing procedures to perform product assembly.\n, • Reports on issues, malfunction or defective parts to supervisor\n, • Ensures the assigned bench and work area are clean and organized\n, • Uses machinery/hand tools to perform job\n, • Maintain equipent/tools in good condition\n, • May perform other tasks as required by the Company\n\n What will help you thrive in this role? Qualifications: \n • Reasonable accomodations may be made to enable individuals with disabilities to perform the essential functions of the position.\n, • Must be dependable and responsible\n, • 1-3 years manufacturing experience\n, • Good Attendance is a MUST\n, • Good manual dexterity and hand-eye coordinator\n, • Mechanical abilities are a strong plus for this position as well as attention to details\n, • Good understanding of quality control principles\n Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Overview: This position is for the Overnight Shift 2am - 1030am Monday to Friday Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets. This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other duties may be assigned. Advanced Diagnostics & Complex Repairs • Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:, • Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems)., • CAN-bus and multiplex electrical systems, electronic control modules, and communication networks., • Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs., • Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds. Technical Leadership & Training • Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks., • Assist in training on:, • Diagnostic software and tools., • New equipment technology, safety systems, and telematics., • Company maintenance standards, PM strategies, and repair procedures. Fleet Reliability, Compliance & Continuous Improvement • Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications., • Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT., • Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC). Operational & Customer Support • Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area., • Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets., • Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety. Administrative & Leadership Duties (as assigned) • Help plan daily shop workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop. Requirements and Qualifications::, • High school diploma or GED required; additional technical training strongly preferred., • A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul., • CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads., • Demonstrated expert-level knowledge of:, • Heavy truck and refuse systems., • Refuse hydraulic, electrical, and powertrain systems., • Diagnostic software, scan tools, and OEM service information., • Proven track record of performing complex diagnostics and repairs independently., • Must provide own professional-grade tools required for diagnostic and repair work., • ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred., • Possession of a valid driver’s license is required., • Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred., • Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred., • Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $31.47/Hr. Salary Range Maximum: USD $31.47/Hr.

Job Overview Electro Industries/Gauge Tech (EIG), a Division Of Hubbell Inc. has an opening for an experienced electronics assembler in our Westbury manufacturing facility. A Day In The Life Essential Functions: \n • Follows assigned manufacturing procedures to perform product assembly.\n, • Reports on issues, malfunction or defective parts to supervisor\n, • Ensures the assigned bench and work area are clean and organized\n, • Uses machinery/hand tools to perform job\n, • Maintain equipent/tools in good condition\n, • May perform other tasks as required by the Company\n\n What will help you thrive in this role? Qualifications: \n • Reasonable accomodations may be made to enable individuals with disabilities to perform the essential functions of the position.\n, • Must be dependable and responsible\n, • 1-3 years manufacturing experience\n, • Good Attendance is a MUST\n, • Good manual dexterity and hand-eye coordinator\n, • Mechanical abilities are a strong plus for this position as well as attention to details\n, • Good understanding of quality control principles\n Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

NYU Langone Hospital—Long Island is a 591-bed university-affiliated medical center, which offers sophisticated diagnostic and therapeutic care in virtually every specialty and subspecialty of medicine and surgery. We are a major regional healthcare resource with a deep commitment to medical education and research, offering a full complement of inpatient and outpatient services. At NYU Langone Health, equity and inclusion are fundamental values. We strive to be a place where our exceptionally talented faculty, staff, and students of all identities can thrive. We embrace inclusion and individual skills, ideas, and knowledge. Learn more about ___, and interact with us on ___, ___, ___, ___, ___, ___ and ___. Position Summary: We have an exciting opportunity to join our team as a Per Diem Vascular Technologist - NYU Langone East End Cardiology - Riverhead. In this role, the successful candidate will be responsible for performing vascular studies on assigned patients. Participates in Continuous quality improvement, Chart review, and collaborates with the Vascular Medical Director to promote appropriateness of studies. Adheres to policies and procedures, and The Joint Commission The Inter-societal Commission for the Accreditation of Vascular Laboratories (ICAVL) regulatory agency requirement. Job Responsibilities: • Maintains equipment; by thoroughly cleaning it and keeping it fully equipped for use. Thoroughly washes the machines after each patient use. Ensures that equipment is stocked with necessary supplies to perform daily vascular studies., • Performs organizational tasks within the Department. Efficiently organizes workload. Consistently maintains filing and enters data for vascular studies to remain current. Performs chart reviews., • Uses Infection Control practices and procedures. Demonstrates correct hand washing techniques., • Performs and promotes compliance with policies and procedures regarding electrical safety, hazard identification, waste disposal and standard precautions. Uses and monitor equipment appropriately and safely. Reports patient care outcomes information to members of the team, as appropriate. Serves as a resource for problem solving to all members of the team, as appropriate. Performs accurate, timely documentation using appropriate forms., • Assesses, plans, implements and evaluates patient care., • Demonstrates correct use of PPE techniques. Identifies monitors and adheres to sterile boundaries., • Performs other duties as assigned Required Licenses: Reg Vascular Technologist-Cert, Registered Vascular Specialist Qualified candidates must be able to effectively communicate with all levels of the organization. NYU Langone Hospital—Long Island provides its staff with far more than just a place to work. Rather, we are an institution you can be proud of, an institution where you'll feel good about devoting your time and your talents. At NYU Langone Health, we are committed to supporting our workforce and their loved ones with a comprehensive benefits and wellness package. Our offerings provide a robust support system for any stage of life, whether it's developing your career, starting a family, or saving for retirement. The support employees receive goes beyond a standard benefit offering, where employees have access to financial security benefits, a generous time-off program and employee resources groups for peer support. Additionally, all employees have access to our holistic employee wellness program, which focuses on seven key areas of well-being: physical, mental, nutritional, sleep, social, financial, and preventive care. The benefits and wellness package is designed to allow you to focus on what truly matters. Join us and experience the extensive resources and services designed to enhance your overall quality of life for you and your family. NYU Langone Hospital—Long Island is an equal opportunity employer and committed to inclusion in all aspects of recruiting and employment. All qualified individuals are encouraged to apply and will receive consideration. We require applications to be completed online. View ___. NYU Langone Health provides a salary range to comply with the New York state Law on Salary Transparency in Job Advertisements. The salary range for the role is $55.00 - $55.00 Hourly. Actual salaries depend on a variety of factors, including experience, specialty, education, and hospital need. The salary range or contractual rate listed does not include bonuses/incentive, differential pay or other forms of compensation or benefits. To view the Pay Transparency Notice, please ___

Job Description Mid Level Automotive Technician – Fleet Maintenance – Night Shift – Jericho, NY Company: Goodyear Tire & Rubber Company Pay: $25–$30/hr Location: - 336 N Broadway Jericho, NY 11753-2031 Schedule: 9PM–7AM (4-day) or 9PM–6AM (5-day) Job Summary: Perform fleet maintenance on delivery vans including: • Oil changes & tire installation, • Brake repairs & inspections, • Fluid flushes & preventative maintenance, • Basic diagnostics, • 1+ year automotive repair experience, • Brake & maintenance experience required, • Valid driver’s license, • ASE Certifications, • Diagnostic & electrical experience, • Medical, Dental, Vision, • 401(k) with match, • PTO + Holidays, • Tuition Reimbursement Automotive Technician | Auto Mechanic | Fleet Mechanic | Lube Technician | Brake Technician | Preventative Maintenance | Delivery Van Mechanic | Night Shift Mechanic | ASE Technician Night Shift Brake Technician - Jericho, NY | New York | Goodyear Careers Company DescriptionGoodyear owns and operates more than 580 tire and auto service centers nationwide. We offer a fun, fast-paced work environment, with competitive base pay. Our comprehensive benefit package includes medical plans, 401(k), certification reimbursement and paid vacations. At Goodyear we invest in you and your future by providing excellent training for our technician, sales team and management positions. We offer fast-track career advancement opportunities for hard-working team players who can deliver results. If you are looking for more than a job, apply today and begin your career with the tire and auto service innovation leader! GOODYEAR IS AN EQUAL OPPORTUNITY EMPLOYER Goodyear is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regards to that individual's race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender identity, age, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law. We endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please call (312) 915-5548 Click here for more information about Equal Employment Opportunity laws, and here for additional supplementary information. Goodyear is one of the world's largest tire companies. It employs about 74,000 people and manufactures its products in 57 facilities in 23 countries around the world. Its two Innovation Centers in Akron, Ohio, and Colmar-Berg, Luxembourg, strive to develop state-of-the-art products and services that set the technology and performance standard for the industry. For more information about Goodyear and its products, go to owns and operates more than 580 tire and auto service centers nationwide. We offer a fun, fast-paced work environment, with competitive base pay. Our comprehensive benefit package includes medical plans, 401(k), certification reimbursement and paid vacations. At Goodyear we invest in you and your future by providing excellent training for our technician, sales team and management positions. We offer fast-track career advancement opportunities for hard-working team players who can deliver results. If you are looking for more than a job, apply today and begin your career with the tire and auto service innovation leader!\r\n\r\nGOODYEAR IS AN EQUAL OPPORTUNITY EMPLOYER\r\nGoodyear is an Equal Employment Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regards to that individual's race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender identity, age, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.\r\n\r\nWe endeavor to make this site accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please call (312) 915-5548\r\n\r\nClick here for more information about Equal Employment Opportunity laws, and here for additional supplementary information.\r\nGoodyear is one of the world's largest tire companies. It employs about 74,000 people and manufactures its products in 57 facilities in 23 countries around the world. Its two Innovation Centers in Akron, Ohio, and Colmar-Berg, Luxembourg, strive to develop state-of-the-art products and services that set the technology and performance standard for the industry. \r\n\r\nFor more information about Goodyear and its products, go to

Job Description JOB DESCRIPTION JOB TITLE: SUPERINTENDENT FLSA: NON-EXEMPT DEPARTMENT: HOUSING PROGRAMS - FACILITIES LOCATION: NEW ROCHELLE, NY SALARY: $19.00 - $22.00 (HOURLY) SUMMARY: Responsible for general upkeep and overall maintenance of the property and building systems. Reports to General Supervisor. This is a Live-In position. DUTIES & RESPONSIBILITES: • Position requires that Superintendent reside at location. It is a 2-bedroom unit., • Assess maintenance needs of property & communicates directly to supervisor of property condition., • Supervises building systems., • Respond in a timely manner to emergencies and to tenant concerns, including weekends., • Document tenant damage and reports incident to supervisor., • Perform light electrical work on items such as appliances, switches, outlets, pull chain switches, electrical splicing and repair appliances., • Perform light plumbing work, such as clearing stoppages and replacing fittings., • Replaces the following: vinyl floor tiles, replace loose broken ceramic tiles, install carpet, window screens, fixtures and locks., • Perform carpentry work such as replacing doors, repair windows, door saddles and windowsills, light painting and masonry repair., • Perform daily custodial work, including sweeping, mopping, emptying trash, and cleaning windows and glass in common areas., • Assist in grounds work when necessary., • Maintains yard and garbage areas., • Common areas, hallways must be kept cleaned and disinfected. Stairwell’s swept and mopped., • Participates in standby emergency schedule for evening, weekend and holiday coverage., • Responsible for stock and inventory control of property., • Periodically inspect all units, building common areas and repairs as needed., • Maintain adequate lighting throughout building, common areas, basement and yards., • Other duties as assigned. EXPERIENCE AND QUALIFICATIONS: High School Diploma or GED with two years experience in related field. Must be able to lift push or pull 50 lbs. Should have some form of training on the following areas: carpentry, plumbing, electrical, painting, and other trade skills. A certificate in boiler maintenance is preferred. OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE)

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job DescriptionHighly experienced Safety Professional with background in Electrical Distribution, Transmission or Substations, and experience conducting Safety Audits. Position Details: Industry: Electrical Distribution, Transmission, and Substations Duration: 6 Months (Either straight, or month on - month off, or 2 weeks on -2 weeks off) Location: Denver, CO Pay Rate: $Generous, depending on experience Start Date: August/September 2025 Role: Conducting safety audits on work crews carrying out repair and upgrade of equipment including conductors, wooden poles, mostly OH but some UG Assessing crews on adherence to OSHA Standards, Best Practice for the Electrical Utility Standards, and General OSHA Construction Safety Standards, Fleet safety, Forestry regulatory standards for wildfire crews. Carrying out behavior based safety observations, cultural observations, and having an understanding culture within a union environment Qualifications: CUSP preferred Strong working knowledge of Distribution, Transmission, or Substation maintenance Ideally background working with/for the electrical utilities Highly experienced in Safety Regulations and Best Practices relating to Electrical T&D Strong knowledge of OSHA regulations and industry best practices Ability to conduct site audits, safety training, and ensure compliance with safety standards Effective communication and leadership and relationship building skills

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Electrical Testing TechnicianLocation: Nassau County, NY (Remote with fieldwork as required) Employment Type: Full-Time About the Role We are seeking a highly skilled NETA III Electrical Testing Technician to join a leading electrical testing and maintenance services provider. The ideal candidate will have extensive hands-on experience with high, medium, and low-voltage systems, ensuring the safe and reliable performance of electrical equipment across a variety of client sites. This role is best suited for professionals who excel in technical diagnostics, field testing, and team leadership, while adhering to industry standards and safety protocols. Key Responsibilities • Electrical Testing & Diagnostics, • Perform advanced testing on electrical equipment including circuit breakers, transformers, switchgear, motors, PTs, CTs, and cables., • Utilize specialized testing equipment such as Doble power factor test sets, low resistance ohmmeters, VLF test sets, insulation resistance testers, CT ratio/saturation devices, DC hi-pot testers, TTR instruments, and primary/secondary injection tools., • Troubleshooting & Repairs, • Identify, analyze, and resolve electrical issues using schematics, manuals, wiring diagrams, and engineering input., • Recommend and oversee repairs or replacements to ensure optimal system performance., • Maintenance & Compliance, • Inspect, clean, and maintain electrical equipment in compliance with industry and NETA standards., • Conduct risk assessments and enforce OSHA and company safety protocols., • Project Management & Leadership, • Oversee field service projects, ensuring on-time and within-scope delivery., • Mentor junior technicians and support their technical growth., • Collaborate with engineers, project managers, and clients to align project execution with client needs., • Documentation & Reporting, • Maintain accurate records of test results, inspections, and service activities., • Prepare detailed reports to ensure client transparency and compliance. Qualifications • Associates or Bachelors degree in Electrical Engineering, Electrical Technology, or related field (or equivalent military/field experience)., • NETA Level III Certification (required); NETA Level IV preferred., • 57+ years of electrical testing and maintenance experience (480V750kV)., • Strong knowledge of switchgear, transformers, motors, PTs, CTs, and protective relays., • Proficiency in interpreting electrical drawings, schematics, and wiring diagrams., • Proven leadership skills with ability to mentor junior staff., • Excellent communication and report-writing skills., • Physical ability to climb ladders, work in field conditions, stand for long periods, and lift up to 70 lbs., • Valid drivers license with clean record., • Ability to pass pre-employment drug screen, background check, and physical/respiratory fit test., • Flexibility to work overtime when required. Compensation & Benefits • Competitive salary based on experience., • Medical and dental insurance., • 401(k) retirement plan., • Paid vacation, sick leave, and holidays., • Participation in Employee Stock Ownership Plan (ESOP)., • Career development, training, and growth opportunities. Pre-Employment Screening All candidates must pass a background check, drug screen, and may be required to complete a physical/respiratory fit test prior to employment. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job DescriptionAcadia (NYSE:AKR), headquartered in Rye, New York, Acadia Realty Trust (NYSE:AKR) is an equity real estate investment trust focused on delivering long-term, profitable growth via its dual – core and investment management – platforms. Our energized team is accomplishing this goal by building a best-in-class, location-driven core real estate portfolio with meaningful concentrations of assets in the nation’s most dynamic urban and street-retail corridors, including those in New York, Chicago, Los Angeles, San Francisco, Washington DC, Dallas, and Boston. At the same time, we manage opportunistic and value-add investments through our investment management platform. Acadia is seeking an experienced Commercial Property Manager with a successful track record managing mixed use retail in the NYC urban environment to join its team. The successful candidate must have experience with commercial real estate management with an emphasis on retail stores, shopping centers and NYC condominium management. The candidate must be a driven self-starter that can operate independently. The candidate must be a creative problem solver with the ability to make educated decisions and act swiftly to resolve issues in a fast-paced environment. This position is based at the company’s corporate office in Rye, New York, but will require travel into NYC and potentially other tri-state regions to manage additional Acadia-owned properties. Responsibilities include: • Oversee all aspects of the onsite day-to-day operations of a portfolio of assets; urban street retail with condo/co-op board relations., • Strong background and understanding of NYC condo/co-op properties, including governing documents, working with managing agents, and board experience., • Ability to multi-task and prioritize needs and issues at assets along with internal intra-departmental requests., • Schedule and oversee all services vendors/contractors to include daily and monthly preventative maintenance standard practices., • Oversee vendor contracts for assigned properties, • Perform regular inspections of assets including exterior sidewalks, parking lots, roofs, equipment/mechanical rooms, any other common areas, tenant spaces, vacant spaces, etc., • Ensure Life Safety Systems are maintained in accordance with all applicable local, state and federal codes and ordinances., • Take immediate corrective action to address emergencies, and/or site deficiencies; actively monitor all violations, NYC Local Law requirements and diligently remedy all imposed fines., • Act as liaison with retail store’s onsite team and offsite owner/management., • Act as liaison with any residential elements of mixed-use assets; condo/co-ops or owned residential and their management group and boards., • Effectively and timely address any maintenance requests and repairs that are landlord responsibility and/or coordinate with appropriate stakeholders for elements involving the co-op/condo, • Develop and maintain asset operating and capital budgets., • Review and approve invoices for assigned properties, • Ability to read and interpret co-op and condominium budgets and financial statements and participate in the financial planning of assigned assets at the cooperative and condominium level. Responsible for reviewing, approving and processing invoices from assigned condominium and cooperatives., • Oversee retail unit vanilla box projects and tenant construction projects and coordination with various stakeholders including co-op and condo buildings, boards, managing agents and its professionals., • Involvement in Landlord Work projects and coordination with internal Construction Department and outside stakeholders such as cooperative and condominium buildings, managing agents, professionals, and superintendents., • Ability to read and interpret construction plans and documents. Review tenant construction plans; approve or flag issues requiring revision or clarification from tenant’s team. Act as a liaison with co-op and condominium Boards, managing agents, and its professionals to facilitate the alteration plan review and approval process. Working with Tenant Coordination team to facilitate the alteration review and approval process., • Represent ownership at board meetings of the co-ops and condos., • Represent ownership by creating and maintaining strong relationships with condominiums and condo management, local police/fire departments, BIDs, MTA, and other 3rd party groups., • Bachelor’s degree required., • Must possess a valid driver’s license with reliable transportation to travel to property sites as required., • 5 to 7+ years’ experience in commercial real estate management with an emphasis on retail store management, portfolio management experience, and experience with NYC co-op and condo Properties, • Experience with reading construction plans, leases, co-op and condo governing documents, and other building and real estate documents., • Knowledge of NYC compliance, rules and regulations, including DOB, FDNY, and LPC., • Knowledge of Jack Jaffa, or similar software, and navigating NYC compliance related matters., • Experience with overseeing onsite construction projects; landlord common area paving, concrete, roofing, façade, storefront and other projects., • Experience with alterations in NYC co-op and condominium properties, including addressing emergencies and crisis management., • Experience with capital improvement projects, including in NYC co-op and condominium properties., • Experience with NYC co-op and condominium board meetings, including annual meetings., • Understanding of operations of building equipment including HVAC, electrical, sprinkler, fire alarm and plumbing., • Understanding of operations of co-op and condo properties in NYC., • Knowledge of reading and analyzing budgets, capital plans, variance reports, and financial statements, including for NYC co-op and condominium properties, • Knowledge of insurance with an emphasis on NYC co-op and condominiums., • Experience working with on-site property personnel and managing agents with an emphasis on NYC co-op and condominiums., • Highly effective leadership, organizational, interpersonal and communication skills., • Excellent time management skills, • Proficient in Microsoft Office Suite, • Demonstrated experience with large, complex accounts and portfolios with multiple properties and stakeholders., • Excellent decision making and analytical skills to evaluate, prioritize and address issues and action items in assigned portfolio. The base salary compensation range for this role reflects the wide range of factors that are considered in making compensation decisions, including but not limited to, skill sets; experience and training; licensure and certifications; and other business and organizational needs. Compensation decisions are dependent on the facts and circumstances of each individual. A reasonable estimate of the current base salary range for this position is $110,000 - to $120,000. Employees may also be eligible to participate in an annual discretionary bonus program, subject to the rules governing the program, whereby an award, if any, depends on various factors, including, without limitation, individual and organizational performance. Acadia Realty is an Equal Opportunity Employer - Veteran/Disability

Job DescriptionCompany Description OUR STORY Equinox Group is a high growth collective of the world's most influential, experiential, and differentiated lifestyle brands. We restlessly seek what is next for maximizing life - and boldly grow the lifestyle brands and experiences that define it. In addition to Equinox, our other brands, SoulCycle and Equinox Hotels are all recognized for inspiring and motivating members and employees to maximize life. Our portfolio of brands is recognized globally with locations within every major city across the United States in addition to London, Toronto, and Vancouver OUR CODE We are passionate about high performance living and we practice what we preach – investing time in our own health and fitness. We believe that everyone has untapped potential within them and it takes a disruptive approach to unleash it. We dream big and don’t settle for the status quo. We sweat the details. We never accept less than 110% to help each other deliver the Equinox experience and enable our members to get great results. We are obsessed with what’s new, what’s now, what’s next. Never following, always leading, living ahead of the moment in fashion, culture and consumer behavior. We aren’t just a company; we’re a community vested in each other’s success. We value humility and a team approach at every level of the company. If you are a high performing individual who is passionate about winning and inspiring others then we are excited to discuss career opportunities with you. Job Description We are looking for an energetic, creative, and reliable Housekeeping Manager to join the Equinox team. This is a great position for a candidate looking to make a significant impact in a growing and dynamic organization. The main purpose of this position is to supervise the maintenance staff and operations of all activities related to club maintenance and to ensure that the club consistently meets Equinox’s standards for cleanliness and safety. Job responsibilities include but are not limited to the following: • Contribute to and consistently apply Equinox’s policies and procedures, • Hire, train, supervise, coach and evaluate maintenance staff, • Develop employees with potential Maintenance Supervisor capabilities, • Conduct performance evaluations on annual anniversary date, • Perform 30, 60, & 90-day review on all new hires, • Require Manager on Duty’s ("MOD") to attend monthly facility reviews, • Train all new staff with the customized, club-specific cleaning checklists, • Complete cleanliness inspections (walk-through), • Perform daily one-on-one meetings with each shift MOD’s, • Report to the AGM daily for open tasks, • Ensure adequate inventory of maintenance and locker room supplies, • Conduct frequent walkthroughs, • Implement inclement weather procedures, • Oversee deliveries, • Be aware and knowledgeable of emergency procedures, • Attend Manager meetings, • Maintain high visibility during peak club hours, • Ensure high level of customer service, • Keep current in knowledge of key competitors as to their location, physical plant, and equipment, • Assist in the development of annual budget with respect to the Maintenance Department To perform this job successfully, an individual should meet the following minimum requirements and qualifications: • Proven experience in a commercial business or fitness setting, • Proven ability to hire, direct, and train staff, • Knowledge in maintenance of mechanical, electrical, and exercise equipment, • Knowledge and experience with tools, • Knowledge and experience with janitorial cleaning products and OSHA standards, • Current C.P.R. and First Aid Certification, • Good financial management, • Ability to utilize new techniques, ideas and solve problems, • Possess honesty and personal integrity, • Hardworking and diligent, • Must have sense of urgency around all work details, • Bi-lingual in English and Spanish preferred Additional Information AS A MEMBER OF THE EQUINOX TEAM YOU WILL RECEIVE: • We offer competitive salary, benefits, and industry leading commission opportunities for club employees, • Complimentary Club membership Equinox is an equal opportunity employer. For more information regarding our career opportunities, please visit one of our clubs or our website at All your information will be kept confidential according to EEO guidelines. Must have a legal right to work in the United States.

Job Description General Summary Responsible for supervising work crews in maintenance and repair assignments to maintain quality control and safe facility environments. Position may also supervise HVAC, plumbing, carpentry and paint crews. May direct through lead employees in order to maximize productivity. Responsible for overseeing the work of J&J subcontractors that are working onsite. Essential Duties and Responsibilities • Schedules maintenance personnel by scheduling preventative/corrective maintenance, work orders, instructing technicians on daily routines, preventative/corrective maintenance and work orders, • Completes administrative duties by assisting with interviewing and hiring duties, counseling and disciplining personnel, ensuring parts are ordered/stock and equipment manuals are updated, • Maintains maintenance operations and sets priorities by inspecting production operations, ensure production is maintained, supervise technicians to ensure work is being done accurately and on time., • Contact subcontractors when needed and supervise their work., • Serves as the preventative and corrective maintenance expert for the team to come to for guidance and direction., • Act as the primary corporate liaison for all aspects of contact with the Supervisor Maintenance, ensuring clear communication, coordination, and adherence to corporate policies and standards, • Investigate equipment failures and issues to diagnose faulty operation, and to make recommendations to project manager, O&M team and FM staff., • Performs frequent Quality Control (QC) inspections, initiates, oversees, and documents corrective and preventative actions in support of the QC program, • Prepare monthly reports as assigned; review assigned service orders monthly to determine percent complete in order to invoice the government., • Perform over the shoulder inspections and help maintain a safe work environment., • Responsible for parts and materials needed for on time maintenance, coordinates requisitions with the Purchasing Department., • Develops thorough price estimates for projects outside of current contracts., • Assist lead workers with communication between staff and the customer., • Supervises the completion of necessary documentation., • Create and maintain work order logs and reports., • Instructs and trains technicians on safety procedures by conducting safety meetings and training on proper usage of equipment, inspecting tools and work areas, • Identifies new parts needed and coordinates requisitions with the Purchasing Department., • Experienced in a healthcare facility accredited by NFPA, OSHA, and GSA Guidelines, • Certified Facility Manager Certification (CFM) is preferred., • Knowledge of NFPA, ASHRAE, Joint Commissioning, proper repair and maintenance requirements for federal facilities, grounds and utilities., • Must be thoroughly familiar with Operations and Maintenance requirements, procedures and the elements., • Knowledgeable and skilled in the operation, repair and maintenance of HVAC systems, building automation systems, electrical, plumbing and mechanical systems, medical gas, fire systems, and security systems., • Experienced with Maximo or other CMMS system is highly desired., • Ability to read and understand blueprints., • Effective oral and written communications skills., • EPA Reg. Refrigerant certification preferred., • OSHA 10-hour or OSHA 30 hour preferred (Obtainable within one year of employment)., • May be needed after hours for emergency repairs., • Excellent oral and written communication skills., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc., but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc., • Must be able to pass a local background check and have the ability to obtain and maintain public trust clearance after hire. Disclaimer This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $115,000 to $135,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description Who We Are South Oxford Management (SOM) is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for both our residents and team members. Our owners and leadership team bring extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Supervisor is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor collaborates closely with the Community Manager and Maintenance Technicians to ensure that all aspects of the community are well-maintained. The Maintenance Supervisor anticipates, identifies, and corrects problems affecting the community, and implements procedures to prevent such issues. The Maintenance Supervisor works diligently to cultivate resident satisfaction. The start date is anticipated between May 01, 2026. Things You Will Do Leadership • Assist in the hiring, training, and supervising of all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors; depending on the property needs and secure bids for services, • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights, • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • You must have a valid driving license., • High School diploma or equivalent, • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • Experience leading and managing others., • General knowledge of all things pertaining to property maintenance., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • Attention to detail., • $45.67 hr., • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job Description Power-Flo Technologies is seeking an HVAC Sales Representative. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. As the HVAC Sales Representative, you will: • write orders and assist in selling HVAC controls., • Develop and maintain vendor relationships., • Develop and maintain relationships with an assigned customer base, including key accounts, ensuring their satisfaction with our products and services always., • Work with other branch personnel to ensure great customer service from the order to the delivery and beyond., • Schedule outside appointments with existing customers to review applications requirements, and uncover new opportunities, • Assist customers (in person or over the phone) during a sales inquiry, in an effective and efficient manner that encourages return business., • Accurately conducts the sales transactions by appropriately entering the customer order in the system., • Maintains an awareness of all product knowledge, information and promotions. Suggests alternative product when appropriate., • Picks and fills orders when appropriate. Assures that orders leaving the warehouse are checked and accompanied, by the appropriate documentation., • Purchase special order material, for customers, as per company procedure. Expedite open orders., • Process product returns, per company procedure assuring that all documentation is collected., • Continually enhance sales skills and product knowledge to promote a professional image in the field., • Monitor sales trends and product performance results. Necessary Qualifications: • 2+ years of HVAC sales experience required, • HVAC product and vendor knowledge, • Demonstrated ability to communicate clearly and concisely in written and verbal formats, • Strong customer service orientation, • High school diploma or equivalent, as determined by the company, • Must have a valid and clean driver's license to travel to vendors and customers in the LI/NYC area Pay & Benefits: • Wage Commensurate with experience ($60,000 - $80,000 annually), • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Commission Potential With over 300 team members across 11 different locations, Power-Flo Technologies is an ever-growing group of companies headquartered in Long Island, NY. Power-Flo Technologies is the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. With teamwork at the forefront of our vision, we foster opportunities for learning and professional development while providing on-the-job training. Visit for details on the company. We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Are you passionate about project management and dedicated to continually delivering excellence? If so, we have an exciting opportunity for you to join our team as a Project Manager. We’re seeking a Project Manager who thrives in a dynamic environment, can drive multiple complex projects to completion, and lead with accountability and precision. This is a local, on-site role based out of our Port Washington office, with some travel to federal project sites as required. VIRSIG heroically provides global technology integrations, construction solutions, and professional services worldwide. We service federal, state and local government agencies and commercial entities who believe what we believe. We are committed to protecting America’s warfighters, first responders, and installations against all threats, foreign and domestic. As a Project Manager, you will play a pivotal role in leading and managing Electronic Security Systems (ESS) projects from inception to completion, ensuring that they are delivered on time, within budget, and to the highest quality standards. You will work closely with our clients, project teams, and subcontractors to coordinate project activities, mitigate risks, and achieve project objectives while maintaining strict adherence to contractual requirements, company standards, and government regulations. This is a unique opportunity to be part of a dynamic team that is shaping the future of security technology and making a meaningful impact on national security. If you are a motivated, results-driven professional with a strong background in project management and a passion for serving those who serve, we invite you to join us. Job Details Responsibilities • Manage, oversee and coordinate all field activities for various types of projects, including large and complex or multi-phased projects, from deployment through completion and sign-off, • Maintain accurate and up to date records of job status, job changes, material flow and other control records necessary for processing of internal and external reports or approvals, • Proactively identify and communicate potential project risks and collaborate to develop/implement strategies to minimize impact and control deviations from estimated costs and project deadlines, • Proactively communicate project status, schedules, change proposals, change orders and related project activities on a regular basis with Operations Team and customer as directed, • Coordinate the procurement of materials, supplies, services, and controls necessary for timely and cost-effective completion of project within budget, • Ensure project milestones are achieved; identify risks and develop mitigation strategies; adjust or correct project plan and/or project cost estimates as necessary to meet schedule and financial goals, • Understand and manage the scope of work and terms and conditions in customer contracts, including cost control, delivery fulfillment, quality of service and other customer requirements, • Bachelor’s degree in management, engineering, or related field or equivalent experience, • Minimum of five years of project supervisory experience required, • Minimum of eight years of previous relevant installations, field service, project management or engineering experience with US government contracts or operations preferred; at least 5 years managing projects focused on installation, integration, or maintenance of electronic security system, • Experience in one or more of the following industries preferred: Construction, logistics, low-voltage or wireless communications, electrical, fire alarm & life safety, and/or building automation, • Project Management Professional (PMP) certification a plus; project-specific industry certifications and/or licenses required, • OSHA 30 preferred, • Expert organizational and project management skills including cost control and financial analysis, • Technical aptitude in subject matter area a huge plus (construction, electronic security/fire alarm systems, network/IT, wireless or other communications systems), • Leadership, mentoring, and staff development skills - Act as a role model and leader for assigned teams and ensure all team members are treated fairly and provided growth opportunities, • Adaptability to respond effectively to changes in situation or information; ability to influence others and build consensus using written and verbal communication skills, • Ability to build collaborative work environment for customer, stakeholders, and team members, • Proficiency in Microsoft Outlook, Project, Excel, Word, and PowerPoint; familiarity with schedule/Gantt chart review and analysis, • Ability to walk up to a mile without physical distress and climb stairs, • Frequent prolonged periods of standing, bending, pulling, twisting, reaching, and climbing, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus, • Occasionally, the colleague may be required to climb and work in high places, stoop, bend, or reach above the shoulders, • Frequently required to sit, stand, walk, talk, or hear; use hands to handle or touch objects or controls, • Must be able to lift, push, or pull up to 25 pounds and occasionally lift, push, or pull up to 50 pounds Work Environment, • This is an office-based position which requires regular work-related travel and visits to work sites in the field; site conditions will vary, • While performing the duties of this position, the employee may be exposed to weather conditions from above 100oF to below 0oF and exposed to various climates and conditions, • May require work in confined spaces, • Risk of electrical shock and/or radiation may be present At VIRSIG, we believe that service to others can change the world. We believe that those who serve with strong morals and character can inspire others to do the same and overcome obstacles and challenges that many may see as insurmountable. We believe that it is our duty to defend, protect, and serve those that uphold our nation’s values. If you’re driven and looking for a place to grow, come join us. VIRSIG’s Core Values • People Matter, • Do the Right Thing, • Endless Pursuit of Excellence, • Long-term vs Short-term Focus, • Be Heroic!, • Never Give Up VIRSIG offers eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, professional development assistance, as well as participation in a 401(k) plan with company match. Salary will be commensurate with experience. VIRSIG is proud to be an equal employment workplace. Individuals seeking employment at VIRSIG are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR jncC0R3QwB

Job Description Position Summary: The Senior Firmware Engineer leads the design and development of embedded firmware for next-generation connected devices. The ideal candidate has deep experience in wireless networking protocols, embedded systems, secure bootloaders, OTA firmware updates, and custom network stack development. This role requires strong hands-on expertise across the full product lifecycle developing smart connected products for the commercial and residential markets. Key Responsibilities: • Architect, design, and implement embedded firmware in C/C++ for ARM Cortex (M0/M3/M4/M33), STM32, Nordic nRF, ESP32, and similar microcontrollers., • Develop and maintain custom wireless network stacks operating over Bluetooth, Thread, LoRa, sub-GHz radios., • Implement and optimize communication protocols including DMX512/RDM, DALI/D4i, RS485, UART, SPI, I2C, USB, Ethernet, and proprietary protocols., • Design and implement secure bootloaders, OTA firmware upgrade mechanisms, encryption, and key management systems., • Execute the roadmap for the architectural design of firmware for the Smart modules and gateways, ensuring scalability and modularity across multiple hardware variants., • Architect and implement robust communication stacks for wireless and wired protocols, including Bluetooth Mesh, Wi-Fi, DMX512/RDM, RS-485, and DALI/D4i, ensuring interoperability within the smart lighting ecosystem., • MS in Electrical/Computer Engineering, Computer Science or equivalent industry experience., • 10+ years of experience in Embedded Firmware engineering., • Strong proficiency in C/C++ for embedded systems for resource-constrained embedded systems., • Extensive experience developing embedded Linux systems, including bootloaders, kernel drivers, and user space applications., • Strong experience with 32-bit ARM microcontrollers and in-circuit debugging techniques., • Deep applied knowledge of various networking and hardware communication protocols such as SPI, UART, I2C, JTAG, SWD, BLE/Mesh, DMX, DALI, Wi-Fi., • Proven hardware bring-up, prototyping, and debugging experience using oscilloscopes, logic analyzers, protocol analyzers, and other lab instrumentation., • Experience with modern software configuration and issue management tools (Git, Jira, etc.)., • Practical experience with Design for X (DFx), including design for cost, manufacturability, and testability., • Willingness and ability to travel domestically and internationally as required based on business need. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job Description Position Summary: The Cloud Solutions Architect owns the cloud platform for the WAC Group’s new smart products. The ideal candidate will architect the cloud backend from the ground up, drive technical decisions across teams, and serve as the technical point of contact for customers and partners. The individual in this role will also support the existing residential cloud platform as needed. This role requires strong hands-on expertise across the full product lifecycle developing smart connected products for commercial and residential markets. Key Responsibilities: • Partner with firmware, mobile, application, and solutions teams to define system architecture, integration patterns, and technology selections that align with product and business objectives., • Evaluate, recommend, and standardize cloud services, frameworks, and architectural patterns to meet performance, scalability, reliability, and cost targets., • Implement best practices for CI/CD, infrastructure-as-code, code governance, and release management to ensure reliable and repeatable cloud deployments., • Design and maintain monitoring, logging, tracing, and alerting systems to proactively manage cloud and device performance, uptime, and reliability., • End-to-End Ownership: Own full accountability for the cloud platform’s architecture, reliability, security, and performance—proactively identify risk and drive resolution., • Cross-Functional Leadership: Align firmware, application, DevOps, and product teams around cohesive architectural decisions that serve both technical and business objectives., • Customer-Centered Execution: Communicate complex technical concepts clearly, build trust with customers and partners, and deliver solutions that meet real-world performance., • Technical Excellence & Rigor: Set and enforce high standards for scalability, observability, security, and operational discipline., • Bachelor’s degree in Computer Science, Electrical Engineering, or a closely related area of study., • 8-10 years of software development experience, including 5+ years architecting and operating production cloud systems (AWS strongly preferred)., • Deep knowledge of IoT communication patterns and protocols (MQTT, HTTP, WebSocket), device shadow/state management, and secure edge-to-cloud integration., • Proven experience designing and operating scalable, production-grade serverless and microservices architectures., • Experience defining SLAs/SLOs, implementing monitoring frameworks, and leading disaster recovery and business continuity planning., • Proven strength in understanding distributed systems, event-driven architectures, and modern software design principles. (SOLID, Clean Architecture)., • Strong proficiency in Python and JavaScript/Node.js and TypeScript; working knowledge of additional languages (Go or C++ is a plus)., • Experience designing and optimizing SQL and NoSQL data models (DynamoDB, Aurora/RDS preferred)., • Mandarin language proficiency (verbal and written) is a plus. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job DescriptionAre you detail-oriented, organized, and eager to gain hands-on office experience? As an Administrative Assistant at Power-Flo Technologies, you’ll play a vital role in keeping our daily operations running smoothly. Your work will directly support our Accounts Receivable, Accounts Payable, Sales, and Operations teams—helping ensure accuracy, efficiency, and a positive experience for our customers, vendors, and visitors. Salary Range: $17 - $19/hour Full-time, on-site role. Monday - Friday. 7 AM - 4 PM or 8 AM - 5 PM. Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Company provided life insurance (after 1 year of employment), • On-the-job training, • Opportunities for growth What You’ll Do Every Day You’ll be trusted with essential responsibilities that keep our business running, including: • Supporting AR, AP, and Sales teams with credit card processing, vendor setup, invoice retrieval, shipping documentation, and email management, • Entering and maintaining accurate data for warehouse and counter sales operations, • Greeting visitors and managing a multi-line phone system with professionalism and warmth, • Scanning, printing, filing, and organizing documents, • Sorting and distributing incoming mail, preparing outgoing mail, and tracking packages, • Making routine trips to the bank and post office using a company vehicle, • Managing the Accounts Payable inbox and related correspondence What You Bring You don’t need years of experience—what matters most is your mindset and willingness to learn. • Eagerness to gain hands-on office and administrative experience, • Ability to manage your time, prioritize tasks, and multitask effectively, • Strong written and verbal communication skills, • High attention to detail with solid organizational skills, • Basic math proficiency, • Working knowledge of Microsoft Word and Excel, • Comfort with computers and a willingness to learn new systems, • Valid, clean driver’s license for daily trips to the bank and post office using a company vehicle Physical Requirements: • Ability to sit for prolonged periods of time (with accommodations upon request), • Ability to utilize a computer keyboard, computer monitor, adding machine, and telephone for prolonged periods of time (with accommodations upon request) Power-Flo Technologies is the premiere provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionBenefits: • 401(k), • Opportunity for advancement Responsibilities Perform daily maintenance and minor repairs on facilities, equipment, and grounds Assist with classroom setups, furniture movement, and light carpentry, electrical, or plumbing tasks Conduct regular safety and maintenance inspections and report issues promptly Maintain tools, equipment, and supplies in good condition Support event setup and ensure all spaces meet cleanliness and safety standards Respond to maintenance requests from staff in a timely and professional manner Desired Experience One to two years of experience in facility maintenance, custodial work, or related trades preferred Basic knowledge of hand tools, safety practices, and building systems Experience working in a school, daycare, or similar environment is a plus Qualifications High school diploma or equivalent Dependable, punctual, and willing to learn new skills Must pass all required state and regulatory background checks and fingerprinting Ability to lift up to 50 pounds and perform manual labor Reliable transportation to travel between facilities Compensation Hourly pay range: 16.50 Benefits Paid time off and holidays Professional development and training opportunities Tuition discount for employee family members Schedule Monday to Friday, full-time or part-time available Occasional weekend or evening support for school events may be required Why Join Us This is a great opportunity to build maintenance skills in a positive, family-oriented school environment. You will play an important role in keeping our learning spaces safe and functional while gaining valuable experience for future advancement.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Employee discounts, • Free uniforms, • Home office stipend, • Opportunity for advancement, • Paid time off, • Relocation bonus, • Signing bonus, • Training & development, • Competitive Compensation, • Career Advancement Opportunities Responsibilities: • Basic knowledge of the electrical code, • Follow all safety rules and regulations, • Maintain a clean and safe work environment, • Use blueprints, sketches, or building plans to determine electrical requirements and materials needed, • Install new electrical systems and repair existing systems, • Interact with customers, suppliers, and other professionalsQualifications:, • 5+ years of Electrical experience, • Valid Drivers License, • Hand tools, • Professional appearance and courteous personality

Job DescriptionDescription: Job Overview For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Tech II for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. Your Responsibilities: • Apply a “Safety First” approach to every day at Heatherwood., • A minimum experience of 2+ years of multifamily residential, commercial, or hotel maintenance, or similar experience., • Maintain the property's interior and exterior standards., • Openness and approachability to feedback and consistent communication, • Understanding and experience with the following mechanical systems, but not limited to: HVAC equipment, plumbing (water heaters, drain clearing, fixture replacement and repair), minor electrical repair, appliance repair, drywall prep and repair, painting, and carpentry., • Knowledge of building systems including fire sprinklers, fire alarms, and central mechanical/HVAC systems, • Solid understanding of general building maintenance, work order management, and apartment make-ready process., • Ability to effectively troubleshoot and problem-solve maintenance issues., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood property teammates., • Job responsibility requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling, and climbing. This list is an example of the Maintenance Technician II's responsibilities but is not an all-inclusive list of job descriptions. Business needs will dictate additional responsibilities. Requirements: What you bring to Heatherwood: • A positive attitude, • Reliability and dependability, • Team first approach to every day, • Willingness to learn new tasks., • A customer-first approach to providing world-class maintenance and service., • Ability to take direction from a supervisor and work independently through task completion., • Commitment to completion of time-sensitive tasks., • Computer and smartphone skills are required., • Effective written and verbal communication., • Ability to work independently and complete assigned tasks., • Safe understanding of hand/power tools and use of PPE (Personal Protective Equipment), • Flexibility to work overtime and weekends., • Attention to detail and consistently doing the job right the first time., • Valid driver's license. Your Development: • Heatherwood Safety Culture – monthly team safety training, • CPR certification is required at locations with Level 4 Pool Supervision Requirements, • How your success in maintenance contributes to the community's goals, • How to effectively manage your time and communicate in a fast-paced setting., • Pool and Spa training. Support in obtaining CPO (Certified Pool Operator) certificate., • HVAC training and support in obtaining HVAC Universal License., • Ongoing maintenance training and development and internal company growth opportunities.

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job DescriptionDescription: Join Our Team as a Field Service Technician at DOC Services! Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients’ businesses running smoothly. Why DOC Services Inc.? • Year-Round Stability: Enjoy consistent work., • Growth and Development: Continuous training and opportunities to enhance your skills and advance your career., • Comprehensive Support: Be part of a company that sets you up for success, with robust resources and a dedicated support system., • Flexible Scheduling: Achieve work-life balance with schedules designed to fit your lifestyle., • Diagnosing and repairing mechanical and electrical failures on electromechanical equipment., • Performing preventive maintenance while adhering to OSHA safety standards., • Skillfully using hand and power tools for equipment assembly, disassembly, and repair., • Promptly responding to service calls to keep our clients’ equipment operating seamlessly., • A high school diploma or GED., • 2+ years of equipment repair experience or equivalent training., • Strong mechanical and electrical skills, with the ability to read schematics., • A valid driver's license with a clean driving record., • Excellent interpersonal skills and a professional attitude., • The ability to work independently, pay close attention to detail, and remain organized., • Tools of the Trade: Company vehicle, phone, laptop, and gas card provided., • Financial Security: Competitive pay and a 401(k) plan with company match., • Health and Wellness: Comprehensive medical, dental, and vision insurance options., • Career Advancement: Continuous training and professional development opportunities. DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class. Requirements:

Job Description ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services. We are seeking a Field Service Technician to provide testing, maintenance and repair of HEPA filtered devices, including Biological Safety Cabinets, Clean Benches, and Clean rooms. Responsibilities • Using our test equipment, you will learn to test, troubleshoot, diagnose and repair equipment at customer locations., • Training provided, both in classroom and mentorship with experienced technicians., • Good troubleshooting skills are required to assess, diagnose and repair the equipment., • Provide required maintenance for clients in a safe manner and communicate with other technicians to find solutions for service issues., • Prepare paperwork at the completion of each job to record time, repairs completed and parts installed., • Technician must be able to work independently without supervision and represent the company in a professional manner with a neat appearance at all times., • Candidates should have a sound mechanical and electrical aptitude and troubleshooting skills as well as strong computer and organizational skills., • Excellent customer contact skills., • Technician must have a valid state driver's license with clean driving record to operate company vehicles, ability to pass a background check, customer drug testing and safety training., • Physical ability to lift 50 lbs. and work in various positions (bending, kneeling, sitting, standing)., • Must be willing to drive for long trips and travel overnight., • Company vehicle and fuel card, • Health, Vision, and Dental Insurance, • Company paid Life and Accidental Death Insurance, • Short and Long term disability, • 401k plan with matching Company DescriptionWe are a nationwide company and for over 50 years, ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services.We are a nationwide company and for over 50 years, ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services.

Job Description Automotive Service Technician (A & B Level) – Union Shop BMW of Manhasset is growing, and we’re looking for experienced A and B Level Automotive Technicians to join our team. We are a Union shop, offering stability, strong earning potential, and a professional work environment with consistent traffic and a loyal client base. If you take pride in your work, diagnose accurately, and want to be part of a structured, process-driven dealership that values performance — we want to speak with you. What We’re Looking For: A-Level Technician • Master-level diagnostics and electrical troubleshooting, • Engine, transmission, and major component repair, • Ability to work independently and efficiently, • Solid diagnostic ability, • Brakes, suspension, cooling systems, drivability concerns, • Ability to complete work accurately and on time, • Willingness to continue learning and training What We Offer: • Union position, • Competitive flat-rate pay (based on experience), • Consistent work flow, • Paid training (BMW experience a plus but not required), • Clean, modern facility, • Professional management team, • Career growth opportunities Qualifications: • 3+ years dealership or high-volume shop experience preferred, • Valid driver’s license, • Own tools, • Strong work ethic and team mindset, • BMW experience is a plus but not required Why Join Us? We are part of a well-established dealership group committed to long-term growth and investing in our people. Our facility and steady customer base create consistent opportunity for high performers. If you’re an experienced technician looking for stability, strong earning potential, and a shop that runs professionally — apply today.

Job DescriptionJoin LaundryLux DistributionService Technician What we are looking for: A Service technician who installs, services and repairs commercial laundry equipment including washers, dryers, ironers and other related machinery. Before we continue to dive into the requirements for the role let’s talk about Why you should join LaundryLux Distribution? Career Advancement: We offer a career, not just a job. We invest in the personal and professional growth of every employee because we believe growth leads to both business impact and personal fulfillment. Learning and Development: We foster a culture that encourages and promotes professional growth and development, with continuous learning Diversity Initiatives: We are proud to have launched the Women’s Initiative focused on building a better workplace for women, providing support, and recognizing the talented women within our company. LaundryLux Distribution Benefits: • Health benefits package including medical, dental & vision plans, • Life Insurance, • 401(k) with company matching, • Paid Time Off, • Paid Holidays, • Employee Referral Program, • Mentorship Program, • Service, install, and repair equipment in businesses in accordance with established standards and procedures., • Maintain safety and professionalism at all times., • Promote service, preventative maintenance plans and communicate leads to sales team., • Perform routine maintenance and inspections to ensure equipment is operating efficiently and safely, • Provide a thorough explanation of equipment, its capabilities and operation to the customer; responds to all questions in a courteous and knowledgeable manner., • Diagnose and troubleshoot mechanical and electrical issues in equipment., • Accurately complete all necessary paperwork including but not limited to work orders, service orders, time logs, and emergency information schedules., • Replace or repair defective parts such as belts, valves, motors, and computer boards., • Maintain inventory control of assigned equipment to ensure adequate stock levels;, • Participate in inventory process on a regularly scheduled basis., • Maintain control of all assigned company property and ensures that equipment is always maintained in safe operating condition., • Safely operate assigned company vehicle and ensures that it is maintained according to manufacturer’s specifications., • Exhibit appearance and conduct in accordance with established company standards to present a professional image to customers and the public;, • Maintain the highest degree of decency, honesty, and integrity as a guest in a customer’s business., • Perform other related duties as assigned by management. What you should have:, • Commitment to excellence and high standards., • Strong understanding of electrical and mechanical systems., • Ability to interpret technical manuals, drawings, and schematics., • Proficient in using hand and power tools, • Troubleshooting and problem solving., • Excellent written and oral communication skills, • Ability to effectively present information and respond to questions., • Ability to effectively communicate with people at all levels and from various backgrounds, • Ability to manage priorities and workflow., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm., • Ability to work independently with minimal supervision., • Excellent customer service skills., • Proven ability to manage multiple projects and meet deadlines., • Ability to understand and follow written and verbal instructions., • Ability to understand all safety requirements and cautions., • Ability to perform the physical labor necessary., • Valid Driver’s License, • Bilingual skills a plus., • Professional appearance and demeanor Education and Experience:, • High school diploma or GED required., • Minimum of three (3) years’ experience in the residential/ commercial Laundry Industry a plus., • Any combination of education, training, or experience that provides the required knowledge, skills, and abilities. Physical Requirements:, • Must be able to complete various activities in the parts room that may require moving items that weigh 75 lbs., • Ability to operate equipment, i.e., forklift, pallet jack, lift gate. Travel Required:, • Frequent travel to customer locations. People, Share Responsibility, Integrity, Excellence, Customer Focused, Meaningfulness and Fun If you are looking for your next challenge, then this is your chance to join our team of exceptionally talented, creative and innovative professionals. We want you! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Our company participates in E-Verify.

Job DescriptionPosition Description: COMMERCIAL REFRIGERATION APPRENTICE SERVICE TECHNICIAN We are seeking Commercial Apprentice Refrigeration Service Technicians to join our team. The Tier 1 Refrigeration Apprentice learns the foundational principles of commercial refrigeration, assisting senior technicians in maintenance, diagnostics, and repair of refrigeration systems. Apprentices develop basic technical skills, including electrical readings, refrigerant handling awareness, and use of diagnostic tools. This is an exciting opportunity to work in a dynamic environment with advanced technologies while providing top-quality service to our clients.Key Learning Areas:Basic refrigeration cycle and applicationVoltage reading Amperage reading Basic maintenance Basic electric Safety and safety equipment videos Proper work attire How to use basic hand tools How to use basic functions of a multi-meter How to use a refrigerant manifold gauge How to read PT chart and understanding refrigerant types Be able to identify refrigeration components Proper use of basic hand toolsRequirements: Minimum age of 18 years old High school diploma or equivalent. A strong interest in learning about Refrigeration equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid drivers license and reliable transportation (some travel may be required) Ability to lift 50 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the tradeMust-Haves: Positive attitude, highly organized and energetic Valid drivers license with good driving record Must pass company drug test and background check Good personal appearance and the physical ability to lift 50+ pounds Engaging personality for our fast paced, goal driven environment Competitive individual contributor who loves to win as a team Highly motivated, self-starter whos flexible with a great attitudeBenefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance, as well as Life insurance Dental, Vision, and 401K plan Vacation and sick paid time off Paid holidays Referral & Bonus Programs Professional development assistance $17.00 - $18.00 Hourly

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionPosition Description: COMMERCIAL HVAC APPRENTICE SERVICE TECHNICIAN We are seeking Commercial Apprentice HVAC Service Technicians to join our team. The Tier 1 HVAC Apprentice learns the foundational principles of HVAC systems, assisting senior technicians in maintenance, diagnostics, and repair of HVAC systems. Apprentices develop basic technical skills, including voltage and amperage reading, basic maintenance, and use of diagnostic tools. This is an exciting opportunity to work in a dynamic environment with advanced technologies while providing top-quality service to our clients.Key Learning Areas:Voltage reading Amperage reading Basic maintenance Basic electric Safety and safety equipment videos Proper work attireProper use of basic hand toolsRequirements: Minimum age of 18 years old High school diploma or equivalent. A strong interest in learning about HVAC equipment repair Basic understanding of mechanical and electrical systems (training will be provided) Good problem-solving skills and attention to detail Ability to work in a physically demanding environment (lifting equipment, climbing ladders, working in confined spaces) Strong communication skills and the ability to work well as part of a team A valid drivers license and reliable transportation (some travel may be required) Ability to lift 50 70 pounds Willingness to commit to completing the apprenticeship program and pursuing a career in the tradeMust-Haves: Positive attitude, highly organized and energetic Valid drivers license with good driving record Must pass company drug test and background check Good personal appearance and the physical ability to lift 50+ pounds Engaging personality for our fast paced, goal driven environment Competitive individual contributor who loves to win as a team Highly motivated, self-starter whos flexible with a great attitudeBenefits: Competitive pay with opportunities for increases based on performance and skills development Hands-on training and mentorship from experienced professionals Career growth opportunities within the company Health insurance, as well as Life insurance Dental, Vision, and 401K plan Vacation and sick paid time off Paid holidays Referral & Bonus Programs Professional development assistance $17.00 - $18.00 Hourly

Job Description Who are we? Technical Safety Services (TSS) is a leading laboratory service provider with locations across the United States. Our customers include leading life sciences and healthcare companies and renowned research institutions. We are rapidly growing and looking for additional passionate and talented employees to join our team and partner with TSS’ customers who are doing dramatic work focused on improving the human condition. TSS ensures the equipment our customers use to keep their employees and products safe is in full working order. We are the leading provider in the country of testing and certification services for cleanrooms, fume hoods, biological safety cabinets, and other controlled environment equipment. Working at our customers facilities, TSS employees are key enablers – helping ensure safety, accuracy, and compliance in some of the leading laboratories in the United States. How will you make an impact? Field Service Technicians are dispatched daily to provide a variety of on-site services including cleanroom, biological safety cabinet, fume hood, and pharmacy certification, calibration of laboratory instruments, and many additional services as their careers progress. Our technicians employ excellent client service and a thorough understanding of our portfolio of services to exceed expectations by performing contracted services at the highest level of quality and uncovering new needs when possible. TSS offers a great career opportunity for those with customer service and problem-solving abilities. For our entry-level field technician roles, previous job-related experience is not required as you will be provided with rigorous classroom and on-the-job paid training and mentoring. Once trained, we offer continued career development in field services or in other key roles within our dynamic company. If you enjoy working in an office for 8 hours a day, this role is not for you! If you would enjoy working independently in the field, visiting different customers each day, and being part of a dynamic, growing team, then come join us! *This role involves 20-30% of overnight travel. What will you do? • Perform testing, certification, calibration, and repair services across a variety of laboratory spaces and equipment on client premises and/or in shop facilities., • Interface directly with clients to understand, discuss and execute their needs., • Maintain and improve client relationships and act as the client’s primary in-person interaction with the company., • Complete all required documentation and administrative tasks related to assigned business. TSS offers competitive salaries and a wide range of benefits: • Medical, vision, and dental insurance, • 401(k) plan with a company matching contribution, • Long-term disability, short-term disability, and life insurance Education and Experience • Requires a High School Diploma or equivalent. 2-year or 4-year degree preferred., • Requires 1 year of customer service experience., • Requires 1 year of mechanical, and/or electrical experience, • Excellent customer service and relationship-building skills., • Strong troubleshooting and problem-solving skills with the ability to continually learn new services., • Ability to work effectively with minimal supervision by employing effective time management and prioritization skills., • Highly effective verbal and written communication skills., • Knowledge of basic math including geometry and algebra., • Valid driver’s license and good driving record. TSS is a passionate equal opportunity employer and celebrates diversity. Interested in a role but not sure it’s the right fit for you? Call us and let’s talk. Powered by JazzHR p7OjKibny0

Job DescriptionHow does a Medical Equipment Installer support STERIS? Are you an independent go-getter that is mechanically inclined and that makes Customer satisfaction and safety their top priorities? Come join our team, as a Medical Equipment Installer! As an Installer you will support critical hospital operations through the installation of hospital equipment including sterilizers, lights/booms, utility connections that may be used various settings including operating rooms and sterile processing areas. Installers deliver the highest level of Customer satisfaction from installation through post-installation to ensure continuous care for hospital patients. This is a high travel/commute role with significant driving and likely overnight stays. What does travel look like? You will be required to travel within a designated territory to various installation sites via a company vehicle. This will include day trips and possibly weekly trips from M-F, with some weekend work (not to exceed 2 weekends per month). Your typical hours will vary depending on Customer needs. Overtime is common in this position but not guaranteed. The territory includes NYC, Manhattan, most parts of Long Island and Northern NJ when needed. Being a STERIS Installer means you will: • Join a highly reputable organization that focuses on Quality and Safety ($5 billion global organization that has grown organically and through acquisition. There are approximately 17,000 associates worldwide, which includes over 4,000 customer-facing field-based professionals with opportunities for career advancement within the US and globally), • Travel to various states and hospital systems and work on diverse projects, • Directly contribute to the health and wellbeing of others through installation of equipment ensuring patients receive the highest quality of care.What you will be doing:, • Collaborate with Installation Project Manager to schedule product installation in coordination with equipment delivery, customer availability, and construction schedules., • Prior to installation, verify rough-in dimensions and utilities are adequate to meet equipment specifications. Ensure doorways, elevators, and hallways are sufficient to allow equipment transport to installation site., • Perform installation of STERIS products, including, but not limited to: uncrating; assembling; setting or lifting product into place; leveling; connecting utilities; and testing unit., • Complete service documentation electronically., • Ensure Customer satisfaction through post-installation activities to include disposal of all associated packing and shipping crate material, ensuring equipment is wiped down and fingerprints are removed, and addressing any questions/issues before leaving the site.What you need to be qualified for the position:, • High School Diploma/GED with 5+ years of recent mechanical experience in a construction or HVAC installation/repair field or Associate's degree in Electronics, Mechanical or similar degree, plus 1+ year(s) of related mechanical experience., • Plumbing and electrical experience strongly preferred., • Strong technical and troubleshooting skills., • Excellent interpersonal and Customer communication skills (verbal and written)., • Proficiency in computers and Windows software., • Flexibility to handle multiple and changing priorities., • Ability to work flexible hours, sometimes outside “normal business hours” and travel extensively to support business needs., • Valid driver’s license with clean driving record.What STERIS can provide for you:, • Competitive base pay with differential of 15% based on total hours worked in pay period, • Overtime opportunities, • Annual merit review and incentive plans, • Company vehicle, fuel, vehicle maintenance, • Company provided credit card, iPhone & laptop, • Business travel and all related expenses paid, • Uniforms and all necessary tools provided, • Medical, vision, prescription, dental and life insurance, • 401(k) with a company match, • Paid vacation time and paid holidays, • Extensive hands-on training and development, • Tuition assistance, • Parental leave/adoption assistance, • Commercial Plumbing, • Electrical Schematics, • Machine Building/Assembling, • OSHA 10-Hour Certification (OSHA 10), • Pipefitting Skills, • Excellent Communication Skills, • Blueprint Reading

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program