Electrical training jobs in New Rochelle, New YorkCreate job alerts

Job Description JOB TITLE: MAINTENANCE MECHANIC DIVISION: SERVICES FLSA: NON-EXEMPT REPORTS TO: MAINTENANCE SUPERVISOR LOCATION: WHITE PLAINS, NY SALARY: $18 - $21 per hour SUMMARY: Performs all necessary repairs to plumbing, electrical, HVAC, carpentry fields. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. DUTIES & RESPONSIBILITIES: • Troubleshoots and repairs all HVAC needs such as replacing filters in room units, central heating and A/C units, performs preventative maintenance and cleans all room HVAC units, • Makes repairs to damaged sheetrock, plaster and sands and paints as necessary, • Repairs or replaces doors and locks, • Repairs any client damage to rooms, furniture or room fixtures, • Completes preventative maintenance checklists as directed by Supervisor, • Escorts outside contractors, inspectors and other visitors as needed, • In the absences of lead maintenance person, accepts and verifies deliveries and gives receipts to Facility Manager, • Troubleshoots and repairs electrical outlets, switches, light fixtures, • Troubleshoots and repairs all plumbing washers and seats, drain lines, sinks, tubs and toilets. Clear stoppages, • May assist as needed with transfers or packing and storing of residents’ belongings, • Requires off hours response, • Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years related work experience necessary. Must be able to lift push or pull at least 60 lbs. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR Bd8p0FRl1R

Job Description JOB TITLE: SCATTERED SITE MECHANIC DEPARTMENT: HOUSING PROGRAMS FLSA: NON - EXEMPT LOCATION: YONKERS SALARY: $18 - $21 per hour SUMMARY: Responsible for the performance and delivery of quality services to Westhab properties. These services include, general repairs in plumbing, electrical, painting and plastering, as well as changing locks and repairs to appliances. Reports to the Facility Manager. Proof of COVID-19 vaccine is required. DUTIES AND RESPONSIBILITIES: • Complete assigned work orders and return to Warehouse Clerk., • Assist with apartment turnover repair/upgrade of scattered site units., • Trouble shoot and make repairs to electrical, plumbing and HVAC systems, • Consult with Lead Mechanic on status of repairs needed for units, • Assist with the preparation of scope-of-work for units, • Prepare daily field reports and communicate to Lead Mechanic of repairs needed., • Maintain good communication between clients/tenants and staff, • Respond to emergencies and participate with on-call rotation High School diploma or equivalent required. Minimum two years experience as a mechanic; apprentice skills with the ability to perform repairs on doors, plumbing work, and carpentry required. Must have a clean, valid NYS driver’s license. Good verbal and written communication skills required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR vIMEnm3yW6

Job Description JOB DESCRIPTION JOB TITLE: Maintenance Technician FLSA: Non-exempt DIVISION: Services-Facilities REPORTS TO: Facility Manager LOCATION: Various, NYC SALARY: $21.63 per hour SUMMARY: The Maintenance Mechanic, under the direction of the Facility Manager, performs all necessary interior and exterior facility repairs, including plumbing, electrical, HVAC, and carpentry work, of a NYC DHS contract shelter facility. The mechanic keeps the facility in good working order using troubleshooting techniques and performing repairs as needed. This position requires good judgment and understanding of industry standard repairs, code requirements and worker safety. Position may require some evening and weekend hours. Proof of Covid-19 vaccination is required. DUTIES AND RESPONSIBILITIES: ● Escorts outside contractors, vendors and inspectors and accepts deliveries as needed. ● Responsible for all repairs not requiring a licensed contractor. ● Troubleshooting and repair (light electrical and plumbing work) of outlets, switches, light fixtures, drain lines, sinks, tubs and toilets. Clears plumbing stoppages. ● Performs HVAC troubleshooting and servicing including cleaning units and replacing filters. ● Makes repairs to damaged sheetrock, including finish work/painting. ● Makes adjustments/minor repairs to windows, doors and locks. ● Assembles/repairs/ installs room furniture. ● Repairs any damage to client rooms, furniture and fixtures. ● Responsible for all mechanical work on unit turnovers. ● Completes work orders for occupied client rooms. ● Reports all negative building conditions to the Facility Manager. ● Performs other duties as assigned. EXPERIENCE AND QUALIFICATIONS: High School Diploma or GED with ability to communicate (written and verbal) in English is required. Minimum of two years of repair/mechanical experience is required, including carpentry, painting, plumbing and electrical. Must have good math skills, Trade/Technical school training is a plus. Knowledge of local NYC laws regarding building maintenance is preferred but willingness to learn is essential. Must be able to lift, push or pull 50 lbs. AGENCY PROFILE & EMPLOYEE EXPECTATIONS: Westhab is the premier organization of our kind in our region, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards.

Job Description Facility Maintenance Worker Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, FREE on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Position: Facility Maintenance Worker Full-Time: Hours from 7:45 am to 4:15 p.m. Onsite Monday through Friday 40 hours per week Hourly rate: Ranges from $20 to $25 per hour, commensurate with experience. Duties/Responsibilities: • Conduct routine inspections of the facility to identify and address maintenance needs., • Perform minor repairs on plumbing, electrical systems, HVAC, and other mechanical systems., • Maintain and repair doors, windows, floors, and walls to ensure a safe and functional environment., • Handle general carpentry work, including furniture assembly and installation., • Monitor and address issues related to pest control, waste management, and recycling., • Assist in maintaining outdoor areas, including landscaping and snow removal., • Respond promptly to maintenance requests and emergencies., • Keep accurate records of maintenance activities and report any major issues to the supervisor., • Collaborate with other departments to coordinate maintenance efforts and schedule repairs., • Ensure compliance with health and safety regulations in all maintenance activities., • Required to interact with coworkers and all other departments in a professional manner., • Excellent verbal and written communication skills., • Basic knowledge of plumbing, electrical, HVAC, and general maintenance tasks., • Ability to use hand and power tools safely and effectively., • Physical stamina and ability to lift a maximum of 30lbs when needed., • Knowledge of safety protocols and regulations., • High school diploma or equivalent; vocational training in maintenance is a plus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state laws. #hc158943

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand Team Member of the Month, Quarter, and Year recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process Pay: $20.00+ per hour Benefits: • Dental insurance, • Health insurance, • Paid time off Schedule: • Day shift

Summary Our client, a global Fortune 500 pharmaceutical company, has engaged GForce Life Sciences to provide a Senior Project Manager (SPM) who will provide senior level leadership in planning, budgeting, and overall management of major capital projects and initiatives from conceptualization through design, bidding, construction, commissioning, and close out. Using project management tools and techniques, core focus areas include defining and meeting project goals, budget, schedule, scope, quality, risk mitigation and responding to field conditions and construction logistics and challenges. The SPM shall develop strong collaborative approaches and work closely with Space Planning, Operations, IT/AV, Security and User teams to promote and enable clear and effective communication and team centric leadership, integrating internal teams with consultant design teams throughout the design and construction process. The SPM will provide regular reporting and data analytics to the head of Engineering, Design, and Construction. The SPM will lead one or more high-complexity projects of diverse scope that require an understanding of current business trends, construction techniques, innovative project delivery methods, thorough knowledge of HVAC, electrical, plumbing, fire protection, core and shell construction as well as rigor in compliance, and the highest standard of care. Science projects include research laboratories, vivarium, pilot scale manufacturing, major scientific equipment, and infrastructure projects. The SPM will be responsible to lead design teams and Construction Managers in both the pre-construction due diligence, design and scoping process with a focus on quality management, project controls, and user engagement as well as leading their teams through the bidding and construction administration process with a focus on safety, schedule compliance, field coordination, financial reporting, change order management, commissioning, substantial completion and close out. Job Duties • Develops well-conceived and timely project plans that outline and map the overall project process and breaks critical focus areas that provide detailed, well informed roadmaps and risk aversion planning., • Manages approved funding, commitments and spend for the projects they manage, as well as assisting in developing financial forecasts and risk analyses., • Builds tracking and reporting platforms that integrates into the ED&C project financial and engineering controls system., • Supports and incorporates ED&C Quality Management standards and processes, • Performs all required due diligence activities and ensures responsive incorporation of findings and tracking of risk issues., • Performs all project management duties for major new construction, renovation, infrastructure and facilities related projects using mastery of domain knowledge and extensive business experience., • Monitors design and construction activities to ensure that all phases of work are done in accordance with corporate standards and contractual agreements that is compliant to schedule and budget requirements., • Establishes and maintains highly complex project budgets, cash flow analyses, and cost estimates, as well as reviews purchase orders, change orders, and invoices with significant impact on the success of company operations., • Identifies and addresses areas of concern regarding potential liabilities and risks., • Develops, monitors, and maintains project schedules; ensures that project objectives with regard to time are met. Maintains client, consultant, contractor, and vendor relationships; manages conflict resolution., • Communicates highly complex ideas, anticipates potential objections and persuades others, often at executive leadership levels, to adopt a different point of view., • Evaluates, develops and selects standards, tools, and knowledge requirements for Facilities Project Management skills and career development., • Provides guidance, direction, and instruction in Facilities Project Management to less experienced team members and colleagues., • Collaborates with End Users, Project Stakeholders, Department Heads and key decision makers to ensure compliance to project goals and the management of expectations., • Mentors and guides staff members, teams, and supports development of team members Requirements • Bachelor’s degree in Architecture, Engineering, or Construction Management, Master’s degree preferred, • 15 years of experience in project management/construction management, • $100 million in construction completed, • Knowledge and ability to supervise people, including recruitment, training, performance management, and people development. Preferred Qualifications • Major Research Project, Green Field Design and Construction experience preferred, • Architectural or Engineering background with zoning, planning, design, construction administration, compliance, and infrastructure system understanding preferred. Terms & Start • 4 days onsite in Westchester County, NY, • 12-month contract, high possibility of extension, • Benefits included: Medical, Dental, Vision, • Full time – 40hrs/week, • Paid holidays and 15 days PTO/sick time (combined)

Job DescriptionJob Title Part Time Porter Job Location New York City 10029 OrganizationDraper/Gilbert/Metro Apartments by SKA Marin Management LLC. Salary$17.50/per hour: 24 hours per week Benefits Sick Days Shift and Schedule8 Hour Shift usually Day ShiftWeekend availabilityEvenings as neededNight shift as neededHolidays as neededQualifications • Maintenance: 1 year (Required), • Driver's License (Required), • Day Shift (Preferred) Job Description SummaryResponsible for assisting with operation on maintaining building in day-to -day operations of troubleshooting, diagnostics, housekeeping and repairs on residential buildings, systems, vehicles, grounds and maintenance equipment for assigned properties/facilities, while reporting daily to Superintendent, Assistant Intendent, or Property Manager and maintaining excellent tenant customer service. Job Description: Essential Functions and Responsibilities • Assist with troubleshooting and repairs of buildings and installed systems to include: packaging and handling machinery, plumbing systems, kitchen equipment, roofs, drains, shop, grounds equipment, and HVAC • Handle building janitorial responsibilities such as: • Sweeping, • Picking up trash from the sidewalk, street, hallways, breakrooms, and parking lot, • Removing trash bags from the building; Emptying trash according to established procedures and transports to disposal area as directed, • Cleans Maintenance apartments as requested in emergency situations, • Mopping, • Vacuuming, • Using Industrial Cleaning Equipment to Clean Floors maintaining floor care as directed, • Cleaning And Stocking Bathrooms, • Clean Offices, • Clean all common areas including the lobby, recreational rooms, pool and break room, • Maintain building entryway including leaf and snow removal, • Place safety hazard signs in the building (wet paint, wet floor, etc.) when required, • Monitor, clean and restock supply room, • Respond to spills or other cleaning issues, • Remove trash from main common rooms, • Painting and spackling repairs, • Order cleaning supplies for facility maintenance, • Perform carpentry and snow removal when necessary, • Immediately advises Building Super or on-duty Supervisor of any occurrences outside the normal operating routine of the Residence, • Maintain building entryway including leaf and snow removal, • Makes daily rounds of building and grounds to assess environmental needs or as assigned by Building Superintendent, • Immediately advises Building Super or on-duty Supervisor of any occurrences outside the normal operating routine of the Residence• Complete minor repairs and building improvements •Clean, lubricate, and service a wide variety of pumps, valves, pneumatic controls, electrical, mechanical, and hydraulic devices• Assist with installation and modification of building equipment and systems • Replace and repair building finishes such as ceiling tiles, door hardware, wall paper, and can paint walls, piping, floors and equipment• Troubleshoot, evaluate, and make recommendations to upgrade maintenance operations and/or implement savings opportunities • Possess competent knowledge of the use and care of tools and equipment used in facility and ground maintenance • Respond immediately to emergency situations and customer service requests as assigned. • Inspect buildings, grounds, and equipment for unsafe or malfunctioning conditions, preventative maintenance, etc. • Maintain and operate fire and life safety systems such as; Fire alarm systems, fire pumps and related fire protection system equipment as assigned • Is familiar with all Fire Safety and Evacuation procedures of the residence•Ability to use technology such as; smart phones, tablets, computers, web-based applications, building automation systems, etc.Complete all required Safety Training as scheduled annually•Comply with Uniform Dress Code while working and maintain a neat and clean appearance while on the property at times other than working hours•Performs any and all duties as assigned•Assists Building Super in completion of projects as requested Key Competencies• Technical Proficiency • Initiative • Flexibility • Multi-Tasking • Sense of UrgencyEducation • High School Diploma or GED equivalent Important Experience Experience -1+ years of related experience in a general maintenance setting • Bi-lingual a plus, • Technical, vocational or on-the-job training in at least one of the following areas: HVAC, electrical, mechanical, process controls, mechanical power transmissions, painting, plumbing, carpentry or engine repair a plus, • Possess and maintain a valid driver’s license (commercial license may be required) and good driving record with periodic checks, • Basic Computing Skills in Outlook, Excel & Word May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or stand-by on-call duties Work Environment This job operates in a construction maintenance environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Physical Demands The PHYSICAL DEMANDS described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate with others and exchange accurate information; operate machinery; move about the workplace; remain in a stationary position for 10% of the time; and extend hands and arms in any direction. AAP/EEO STATEMENT SKA Marin provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Further, the company takes affirmative action to ensure that applicants are employed and employees during employment are treated without regard to any of these characteristics. Discrimination of any type will not be tolerated SKA Marin Management provides equal employment opportunity. Discrimination of any type will not be tolerated. SKA Marin Management is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic protected by state, federal, or local law

Job Description As a General Automotive/R&R Technician you will be called upon to service a broad range of vehicle repair issues and to quickly identify the cause of performance problems. Position Responsibilities: • Inspect, diagnose and repair vehicle automotive systems, • Remove and Reinstall Transmission systems., • Assist other technicians in performing technical activities, • Explain problems discovered during vehicle inspection to service writers and technicians, • Continuously learn new technical information, equipment, tools and repair techniques, • Competitive compensation packages based upon experience, • Daytime work hours, • Paid Time off, • Access to AAMCO’s proprietary training programs, seminars and skill presentations, • Live technician support hotline capable of troubleshooting any problem encountered in your center, • An AAMCO Career Path, a formal plan, designed to take you anywhere in the Automotive Industry. We offer a Career not just a Job., • Clean, safe environment, • Minimum of 3+ years’ experience working as a General Automotive Technician, • Own professional grade tools to service any general repair need, • Experience troubleshooting and conducting both mechanical and electrical diagnostics, including drivability testing e7PNE5HLsQ

Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian world, such as electrical engineering and telecommunications.

Job Description Position Responsibilities General Facilities Cleaning (including but not limited to the following) • General office cleaning including: empty trash daily, sweeping, mopping, sanitizing and vacuuming ensuring daily cleanliness of the facility, • Shampooing and spot cleaning carpets, • Event setup and breakdown, • Local pickups with company vehicle, • Snow removal using plows, shovels and heavy equipment (training provided), • Maintaining cleanliness of the ground power washing and sweeping when needed, • Pond maintenance (training provided) Education • Must be able to stand, walk, sit for an extended period of time, • Must be able to climb stairs and ladders, • Must have ample mobility, • Ability to lift and move objects of 50 lbs. or more, • Currently offering tuition reimbursement and free online classes, • On the job training, • Available overtime, • Paid holidays/holiday pay, • Paid time off (personal, sick and vacation)Company DescriptionCome be a part of the rich history that we enjoy at UUCSR! Not only will you work in a beautiful environment surrounded by 100 picturesque acres on the North Shore of Long Island but you will help support a Congregation, established in 1941, with a mission of strong principles and purpose. We are committed to “Human. Kind.”Come be a part of the rich history that we enjoy at UUCSR! Not only will you work in a beautiful environment surrounded by 100 picturesque acres on the North Shore of Long Island but you will help support a Congregation, established in 1941, with a mission of strong principles and purpose. We are committed to “Human. Kind.”

Job Description Mobile Response Team Technician – Aviation Maintenance White Plains, NY | Direct Hire | 40–48/hour + MRT Premium Be Part of Aviation’s Elite First Responders Join PDS Tech Commercial and become a critical member of our Mobile Response Team (MRT)—an elite crew that delivers rapid, expert maintenance to get grounded aircraft back in the air. You’ll work across North America, performing urgent AOG (Aircraft on Ground) recovery operations, ensuring world-class business jets return to service quickly and safely. About the Role This high-impact position is designed for experienced Aircraft Maintenance Technicians who thrive in fast-paced, mobile environments. You’ll travel extensively, work independently, and take ownership of urgent maintenance needs—making a direct difference in keeping advanced aircraft mission-ready. What You’ll Do * Troubleshoot, repair, install, inspect, and perform maintenance on customer aircraft. * Document work in compliance with applicable manuals, regulations, and company standards. * Support multiple maintenance disciplines including avionics, structures, and composites. * Perform mechanical and electrical removals/installations. * Conduct aircraft return-to-service procedures at off-site locations. * Maintain monthly audits of MRT truck, tools, and equipment. * Serve as Delegated Inspector (DI) when qualified. * Remain on-call for rapid deployments, often within two hours’ notice, for assignments up to 30 days. What You Bring * FAA Airframe & Powerplant License (required). * Minimum 3 years’ aircraft maintenance experience, including work on large-cabin business jets. * Strong troubleshooting skills with clear, professional communication at all levels. * Basic hand tools with proper inventory control. * Valid driver’s license and insurable driving record. * Valid passport with the ability to travel internationally. * Ability to work independently, outdoors in varied weather, and on irregular schedules (weekends, holidays, overtime). * Experience with aircraft return-to-service and inspection procedures. Why Join Us PDS Tech Commercial is a Military Friendly® Employer committed to excellence in aviation. Here, you’ll enjoy: * Competitive pay * Direct hire stability with growth potential. * Comprehensive benefits package. * Sign-on and relocation incentives for qualified candidates. * The excitement of travel across North America and working on advanced aircraft platforms. Apply Today Bring your expertise, adaptability, and passion for aviation to the team that keeps business jets flying. Apply now to join PDS Tech Commercial’s Mobile Response Team in White Plains, NY. Pay Details: 40.00 to 48.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job Description Electro-Mechanical Repair Technician Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: In the office- Monday through Friday 7:45 am to 4:15 p.m. Hourly Rate: $20-$27 salary commensurate with experience. Job Summary: The Electro-Mechanical Technician will be responsible for the repair of various SFI components. The day to day could cover a variety of assembly types that include Stall Warning systems, Auto Throttle Systems and Secondary Flight Control transmission systems, this role will be expected to participate in system troubleshooting and diagnostics. They will often interact with Quality Test technicians and Engineering to resolve technical issues. In this role the technician will need to comprehend assembly documentation comprising of Blueprints, General safely and properly utilize required tooling, operate material handling equipment, record system information, adhere to company policies, and interact positively with other team members. Some finished systems could be large and require someone who can physically maneuver around the product. The ideal candidate will be a positive, energetic, self-motivating individual who is ready to learn and contribute to the mission. Duties/Responsibilities: • Troubleshoot technical issues with varying levels of complexity., • Have a working knowledge of Mechanical & electrical theory., • Read and interpret work instructions, drawings, schematics, and other production related documentation. Blueprint interpretation is beneficial., • Solder, and assembly skill., • Utilize a combination of basic hand tools and power tools., • Utilize measuring tools such as multi-meters, continuity checker, Oscilloscopes, etc., • Provide assembly feedback and suggested changes or improvements., • Complete build records and documentation as required., • Conducts quality checks on own work and may execute buddy checks on others work., • Maintain workspace cleanliness and organizational skills., • Follow SFI guidelines and procedures., • Adhere to company regulatory and compliance policies., • Participate in cross-training activities., • Read and comprehend complex manuals and diagrams., • Must be computer literate, possess good written, verbal and interpersonal skills and be fluent in English., • Must have the ability to obtain a Public Trust clearance (US citizenship required). (This can be adjusted accordingly to NYS Law requirements), • ESD Awareness, • 2+ years’ experience in mechanical, manufacturing or research and development assembly, • High school diploma or equivalent Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc199410

Job DescriptionWe are currently seeking a Lead Technical Trainer for our client, a manufacturing company located in Yonkers. In this role, you will lead the company's training efforts, including drafting training materials and managing all training logistics. This is a Permanent Direct Hire position. Hours: 8:30-5:30; Salary: $85-110K DOE Job Description: · Lead company's training efforts in the field, including: • Draft training materials based on vendor data, manuals, and observation, • Apply mechanical and electrical engineering knowledge to create comprehensive training content, • Interpret and explain complex schematics in training materials and sessions, • Verify that all applicable FRA requirements are fulfilled, including those under 49CFR 238.109, • Proofread and edit vendor documents to ensure Training Materials are complete and up-to-date, • Coordinate multiple company instructors, clearly delineating specific areas of responsibility, • Manage all logistical requirements, including support personnel, tools, and consumables, • Ensure vendors and subcontractors maintain quality requirements, • Deliver company's training classes on familiarization, FRA requirements, subsystem integration, and interface, • Provide consistent point-of-contact between company, vendors, and the Authority, • Write letters to company entities, vendors, and Authorities as directed, • Coordinate Training classes at Authority sites, • Verify proper documentation and equipment availability at training sites, • Liaise with Engineering Department for technical clarifications, • Update and ensure timely delivery of all contract Training Deliverables to the Authority, • Assist in designing course curricula and working schedules for new contracts, • Present written evaluations of course and Instructor effectiveness, • Support staff development initiativesEducation:, • BA or BS degree in Mechanical Engineering, Electrical Engineering, or related field required, • Minimum five (5) years' experience conducting technical training, preferably in transportation, • Strong knowledge of mechanical and electrical engineering principles, • Proficient in reading and interpreting mechanical and electrical schematics, • Flexible approach to problem-solving in the field, • Able to travel a minimum of 20%, • Capable of working effectively with minimal supervision ·, • Proficient in Microsoft Word, Excel, and PowerPoint ·, • Experience with Adobe FrameMaker and/or Vector graphics (CorelDraw, Adobe Illustrator, or AutoCAD) a plus ·, • Excellent communication skills, both written and verbal ·

Job Description JOB DESCRIPTION JOB TITLE: Assistant Facility Manager DEPARTMENT: Facility FLSA: Exempt LOCATION: Yonkers, NY REPORTS TO: Facility Manager SALARY $28.00-$38.50/Hourly SUMMARY: The Assistant Facility Manager plays an active role in the day-to-day maintenance and repair of facilities, working alongside the team to troubleshoot and resolve issues. This position combines hands-on technical skills—such as plumbing, electrical, HVAC, and carpentry repairs with administrative responsibilities like managing records, tracking inventory, and ensuring work orders are completed efficiently. The role is critical to maintaining a safe, functional, and well-organized environment while supporting the Facility Manager in supervising staff and daily operations. Proof of covid 19 vaccine is required. DUTIES & RESPONSIBILITIES: • Assist the Facility Manager in the training, scheduling, and supervision of all maintenance and custodial staff., • Troubleshoots and repairs, includes light electrical and plumbing, HVAC, and carpentry., • Responsible for all mechanical work on room turnovers and for work orders for occupied rooms., • Manage work order system, reviewing and closing out work orders daily., • Assist with the distribution of work orders to supervisors and staff., • Maintain a monthly file system for work orders, invoices & superintendent schedules., • Input all invoices and purchase orders for supplies and attach to appropriate work orders. Close out monthly to ensure vendors are paid., • Prepare weekly and monthly reports regarding work order status and close outs., • Responsible for monthly hardware, furniture and supplies inventory., • Assist in the management of files, review timesheets and vacation requests., • Assist with the development and maintain records for all building services, • Available for overtime, as needed., • Other duties as assigned. EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: The ideal candidate is a skilled multitasker with experience working in fast-paced environments and a strong ability to manage both hands-on repairs and administrative tasks. They must possess excellent verbal and written communication skills, as well as proficiency in software like Excel, Word, Google Docs, and work order management systems. Prior supervisory experience is preferred, along with a comprehensive understanding of property management practices, technical maintenance, and building codes. Flexibility to work evenings and weekends is essential, and familiarity with Occupational Safety and Health Administration (OSHA) regulations is a plus. OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE)

Job Description Shop Mechanic - Larchmont, NY This opportunity is with a company that is a Regional Leader in Load Bank Testing and Rental of Mechanical and Electrical Equipment in the Critical Facilities Environment. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Their Service Offering supports Critical Facilities / Data Centers for the Hyperscale, COLO, and Enterprise Data Center Market. A fully competent Shop Mechanical / Electrical Technician applies an intensive and diversified knowledge of complete HVAC start-up, testing and operations. Responsible for maintaining and providing emergency support on critical cooling units including but not limited to chillers, cooling towers, CRAC and CRAH units, air handler units, and other HVAC equipment onsite primarily at HQ and occasionally at customers' sites within regional area. Will be involved in preventive maintenance, emergency response, equipment start-up. Candidate will work at the company's headquarters testing equipment or rebuilding older systems. Discuss with technical support problems related to maintenance or operation of equipment. Consults with supervisor concerning unusual problems and developments. Responsibilities: • Check-in rental equipment upon return/termination of rental to ensure all equipment is returned in satisfactory condition, • Perform Preventative maintenance on rental equipment to include operations and appearance, • Maintain cable inventory to include inspection of condition/testing/repairs if needed and ensuring all cables are kept in a clean & orderly condition, • Perform testing on rental equipment to ensure that the equipment is available and ready-to-rent at all times, • Troubleshoot and repair equipment found to not be operating as intended, • Travel to customer sites to troubleshoot and repair problematic rental equipment in the field (on occasion), • Fill in and maintain test documents/reports, • Maintain shop and storage areas in a neat, clean and orderly condition, • Deliver and pick-up equipment as needed, • Assist customers as needed to ensure that rentals run as smooth as possible, • Maintain all shop equipment in good, safe working order, • Assist with shop projects which will include but are not limited to fabrication of new equipment and upgrades to existing equipment, • Load and unload rental equipment on company vehicles, customer vehicles, and 3rd party carrier vehicles, • Assist in design and fabrication but not limited to accessories, cable sets, pigtails enclosures and shipping cages, • Must be RELIABLE!!!!, • Preferably 2-6+ years' experience in Mechanical and Electrical field and ability to troubleshoot down to component level on equipment such as CRAC, CRAH, Air Handlers, Chillers, Cooling Towers, etc, • Possess general knowledge of experience working with electrical equipment a plus: UPS, batteries, PDU's / Power Distribution Units, Static Automatic Transfer Switches, Branch Circuit Monitoring, and other electrical equipment, • Must be able to understand one line drawings and schematics, • Must understand Electrical / Mechanical Theory, • Journeyman or Master HVAC License a HUGE plus, • HVAC OEM factory training or hands on experience in Trane, Liebert, Stultz, and other major HVAC brands a MUST, • Experience with Liebert DX units a HUGE plus, • CFC / EPA Universal Certification a HUGE plus, • Utilizes hand tools and test equipment to perform work, • Must be able to provide high level of quality customer service, • Requires knowledge of equipment manufacturer's specifications, • Ability to work independently and resourceful, • Knowledge of general computer hardware & software applications, • Requires excellent verbal, written communication skills & customer relation skills, • Have a high school diploma / Technical degree a plus, • Be able to fill out logs/test sheets, • Be willing to travel on occasion to job sites to perform work. After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description BASIC FUNCTIONS Prepare all incoming and outgoing shipments to customers and vendors. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Ensures Shipping and Receiving Department has capacity and capability to meet the needs of the business, • Prepares shipments for postal or commercial conveyance; determines most economical and efficient shipping method; selects appropriate shipping container; packs items to ensure safe delivery., • Prepares bills of lading; checks items to be shipped against picking tickets to ascertain that quantities, destination, and routing are correct., • Receives and unloads incoming materials and compares information to receiving reports to verify priority; may process return shipments from customers., • Packages, labels, insure, and/or logs inventory which is shipped or received., • Inspects shipments for damages or defects; records discrepancies or damages and notifies supervisor and/or purchasing personnel., • Initiate and follow Carrier Transit Claims from submission to conclusion., • Package items for safe delivery to customers., • Check for special customer requirements for shipping., • Organize materials in shipping area., • Perform/Assist with receipt of incoming shipments., • Update Chemtrec portal with SDS documentation, • Assist accounting with shipping invoices. Be able to pack and ship hazmat materials, including Haz Shipper software., • Comply with all requirements of the environmental management system., • Delegate workload to shipping/receiving associates., • Work with shipping company drivers on any changes to pick up times., • Communicate with internal departments on any open issues in a timely manner., • Order materials needed for the shipping department,, • Routinely interface with global trades manager to ensure international shipment conformance., • Training S&R department on procedures and ensuring the teams skill competencies are able to support the business., • Maintains shipping paperwork. (Boxed/Scanned), • Participate in S&R performance reviews, • Schedule work hours for employees to ensure coverage and reduce OT., • Adhere to Safety Manual requirements for Supervisor/Manager, • Ensuring Shipping and Receiving is audit ready at all times., • Inform Director of Logistics of all work stoppages so that he can perform root cause analysis., • Maintain and contribute to a positive environment in the shipping department. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily/Weekly/Monthly Chemtrec fillings, • Daily inbound and outbound freight Report, • Daily Drop off and Pickup Time Scheduling, • Hazmat Shipment Compliance, • Freight Shipment OTD, • QT Training of S&R new hires completed in 90 days, • QT Training records current for shipping and receiving team members EDUCATION / EXPERIENCE / COMPENTECY • High School Diploma, • 2-4 years of relevant experience in related field(s), • Ability to pay attention to great detail., • Prior knowledge of shipping/receiving techniques., • Proven/ demonstrated ability to lead a team.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description TITLE: Inside Distributor Sales Representative DEPARTMENT: SALES REPORTS TO: SR. CORPORATE ACCOUNT MANAGER, SR. ACCOUNT MANAGER FLSA STATUS: NON-EXEMPT/EXEMPT JOB DESCRIPTION REVISION: 1/24/24 BASIC FUNCTIONS As an Inside Distributor Sales Representative at Blue Raven Solutions, you play at pivotal role in ensuring our customers receive exceptional service and support. This entry-level position is designed for individuals with a passion for sales, excellent communication skills, and a positive attitude. Your primary responsibilities include quoting prices for in-stock items, managing a designated customer base, responding to heavy email and phone inquiries, and processing sales orders with precision. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support the creation/building of long-term relationship with customers., • Performs order entry, reviews and processes orders, and create credit requests., • Create processes and maintain a variety of reports pertaining to specific clients., • Provide timely and accurate quotes for in-stock items., • Respond promptly to heavy email and phone activity, demonstrating a positive, friendly, and helpful attitude in all customer interactions., • Manage a defined customer base, establishing and maintaining strong relationships by proactively addressing customer needs and providing tailored solutions., • Efficiently process sales orders, ensuring accuracy and timely delivery while collaborating with various teams., • Interfaces with clients, account managers and internal departments to assist in resolving client-related administrative issues., • Identifies delays or problem areas, and suggests solutions for resolving issues., • Gather competitive information, and provide feedback on customer satisfaction, as well as recommendations to improve procedures., • Provide essential administrative support to the sales team., • Maintain customer database., • Help track individual customer quality and delivery ratings., • Comply with all customer quality requirements., • Support a safe work environment, using safety equipment, ensure safety equipment used in the areas is proper, safe, and used in a productive manner., • Follow established departmental policies, procedures, objectives, and safety standards., • Perform other related duties and personnel backups as assigned and contributes to team effort. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma – College education preferred., • Strong Microsoft Outlook skills, • Strong attention to detail., • Strong follow-up and closing skills to drive sales opportunities to completion., • Customer empathy/ Superior customer service skills., • Highly organized. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description BASIC FUNCTIONS The Training/Project Coordinator is a dual-role position responsible for overseeing employee training programs and managing key internal projects to support organizational growth and operational efficiency. This role will plan, implement, and track both training initiatives and project execution across departments, ensuring alignment with company goals, timelines, and budgets. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Design, schedule, and coordinate internal and external training programs., • Track training completion, maintain accurate records, and ensure compliance with company and regulatory standards., • Work with department heads to assess training needs and develop target learning plans., • Prepare training materials, manuals, and onboarding guides as needed., • Evaluate training effectiveness and recommend improvements., • Lead cross-functional projects from initiation through completion, ensuring scope, timeline, and budget alignment., • Develop project plans, assign tasks, track milestones, and provide regular updates to stakeholders., • Identify and manage project risks, issues, and changes to scope., • Facilitate effective communication between departments to ensure smooth project execution., • Prepare status reports and post-project evaluations. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES (pending) EDUCATION / EXPERIENCE / COMPETENCY • Bachelor’s degree in Business, Human Resources, Organizational Development or related field., • 3+ years of experience in training coordination, project management, or a similar role., • Proficient in project management and learning management systems., • Project Management certification is a plus., • Excellent verbal and written communication skills., • Excellent organizational skills and attention to detail., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at times. TRAINING REQUIREMENTS ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description General Summary Responsible for supervising work crews in maintenance and repair assignments to maintain quality control and safe facility environments. Position may also supervise HVAC, plumbing, carpentry and paint crews. May direct through lead employees in order to maximize productivity. Responsible for overseeing the work of J&J subcontractors that are working onsite. Essential Duties and Responsibilities • Schedules maintenance personnel by scheduling preventative/corrective maintenance, work orders, instructing technicians on daily routines, preventative/corrective maintenance and work orders, • Completes administrative duties by assisting with interviewing and hiring duties, counseling and disciplining personnel, ensuring parts are ordered/stock and equipment manuals are updated, • Maintains maintenance operations and sets priorities by inspecting production operations, ensure production is maintained, supervise technicians to ensure work is being done accurately and on time., • Contact subcontractors when needed and supervise their work., • Serves as the preventative and corrective maintenance expert for the team to come to for guidance and direction., • Act as the primary corporate liaison for all aspects of contact with the Supervisor Maintenance, ensuring clear communication, coordination, and adherence to corporate policies and standards, • Investigate equipment failures and issues to diagnose faulty operation, and to make recommendations to project manager, O&M team and FM staff., • Performs frequent Quality Control (QC) inspections, initiates, oversees, and documents corrective and preventative actions in support of the QC program, • Prepare monthly reports as assigned; review assigned service orders monthly to determine percent complete in order to invoice the government., • Perform over the shoulder inspections and help maintain a safe work environment., • Responsible for parts and materials needed for on time maintenance, coordinates requisitions with the Purchasing Department., • Develops thorough price estimates for projects outside of current contracts., • Assist lead workers with communication between staff and the customer., • Supervises the completion of necessary documentation., • Create and maintain work order logs and reports., • Instructs and trains technicians on safety procedures by conducting safety meetings and training on proper usage of equipment, inspecting tools and work areas, • Identifies new parts needed and coordinates requisitions with the Purchasing Department., • Experienced in a healthcare facility accredited by NFPA, OSHA, and GSA Guidelines, • Certified Facility Manager Certification (CFM) is preferred., • Knowledge of NFPA, ASHRAE, Joint Commissioning, proper repair and maintenance requirements for federal facilities, grounds and utilities., • Must be thoroughly familiar with Operations and Maintenance requirements, procedures and the elements., • Knowledgeable and skilled in the operation, repair and maintenance of HVAC systems, building automation systems, electrical, plumbing and mechanical systems, medical gas, fire systems, and security systems., • Experienced with Maximo or other CMMS system is highly desired., • Ability to read and understand blueprints., • Effective oral and written communications skills., • EPA Reg. Refrigerant certification preferred., • OSHA 10-hour or OSHA 30 hour preferred (Obtainable within one year of employment)., • May be needed after hours for emergency repairs., • Excellent oral and written communication skills., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc., but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc., • Must be able to pass a local background check and have the ability to obtain and maintain public trust clearance after hire. Disclaimer This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $115,000 to $135,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description Senior Electrical Design Engineer About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Onsite Monday - Friday 8:00 a.m. to 4:45 p.m. Salary Range: $115-$140k, commensurate with experience. Responsibilities: • Architect and design electronic circuits for aviation computers, test equipment, and harnesses., • Evaluate design choices to ensure compliance with product functional requirements, environmental compatibility, and manufacturing lifecycle. Generate comprehensive reports and documentation supporting design decisions., • Develop statements of work for contracted services, such as board layout, and effectively manage contractors throughout project execution., • Create detailed test procedures and reports for electronic hardware, ensuring product reliability and performance., • Offer engineering insight to Program Management and Sales and Marketing teams for new business proposals and customer support activities., • Provide support to manufacturing and repair departments, particularly for legacy products., • Expertise in digital design operating in the hundreds of MHz range, utilizing ARM Cortex or similar-scale microcontrollers., • Proficiency in analog computer design and circuit analysis., • Experience designing for electromagnetic compatibility (EMC) and environmental qualification standards such as RTCA DO-160G, MIL-STD-810H, MIL-STD-704F, and MIL-STD-461G., • Experience designing for safety-critical electrical systems., • Excellent verbal and written communication skills., • Schematic Capture and PCB layout with Altium Designer., • Familiarity with bare-metal embedded C to support software engineers in driver development., • Proficiency in Excel, Python, or similar data analysis tools., • Bachelor’s degree in electrical engineering from an accredited school., • 7+ years of experience with responsibilities comparable to those required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #hc186285

Job Description HVAC Controls Engineer - White Plains, NY Our client is a Engineering Design and Commissioning Company that has a national footprint and specializes in MEP critical facilities design. They provide design, commissioning, consulting and management expertise in the Critical Facilities Space. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have previous experience with the design, construction, integration, and commissioning of Controls and Building Automation Systems (BAS systems) as it pertains to Mechanical / HVAC equipment design in a data center environment. The candidate shall have the expertise to lead the design of new systems and make upgrades to existing automation systems for HVAC and critical cooling systems in the mission-critical environment. The candidate may need to assist in complete startup, commissioning, and validation procedures of these systems. The candidate will need to collaborate with the Electrical and Mechanical Engineering teams, for design sequences, powering of equipment, etc. Responsibilities: • Execute and lead automation design teams of complex scope, and coordinate activities with other disciplines as needed, • Mentor mechanical engineers and assist with training on controls design and development., • Design and implement front end platforms for HVAC controls., • Develop and improve configuration, programming, networking, and diagnostic standards, • Engineer and Implement programming, • Lead creation of modification of programming logic to meet sequence of operations / SOO / Methods of Procedures / MOPs, • Design control, monitoring and systems integration of HVAC / mechanical equipment / systems, • Maintain and deploy updated versions of applications for existing control systems with minimal supervision, autonomous in day-to-day work with being given high level instruction on projects or assignments, • Work with leading edge automation systems from large scale controls vendors;, • Lead development design and continuous improvement of configuration, programming, networking, and diagnostic standards;, • Lead design of controls for centralized chilled water plans condenser water plants, etc., • Review engineered shop drawings and submittals - sequence of operations, installation drawings and point lists, • Participate in building automation focused design reviews, • Assist in the design, configuration, programming, and diagnostics / troubleshooting of BAS networks, • Understand IT / OT interface requirements including routers, switches and network addressing, • Assess, recommend, and implement industry best practices into new and existing Critical Environment Programs, • Develop process documentation and training materials, • Communicate regularly with internal and external stakeholders, subcontractors, project managers, AEs, Controls vendors, GC's and commissioning agents on project progress, • BA / BS in Engineering or relevant degree a Huge Plus, • Licensed PE / EIT / Certifications a Plus, • Data Center Engineering experience with Automation and Controls Experience, • Experience integrating PLC / ALC with complex data center / mission critical facilities, • 5-10 + years with BMS / BCM / BAS Systems (Building monitoring systems / building control systems / Building Automation Systems, • Previous experience working on Controls Products from companies such as: Johnson Controls / JCI; Siemens; Automated Logic; Honeywell; GE Control Systems; Schneider Electric, • Ability to read and audit one-lines / blueprints / CAD drawings and controls diagrams, • PLC / ALC Programming Experience, • Experience with Controls systems design as it relates to: Critical HVAC equipment (Chillers, Air Handlers, CRAC / CRAH units, Boilers, etc.), • Experience working with common BAS protocols BACnet IP, BACnet MSTP, Modbus RTU, Modbus TCP, etc., • Skilled at reviewing design drawings and equipment submittals, • Client facing experience and at times serve as primary point of client contact on various projects, • Ability to successfully work independently; Self Starter and should prioritize well, • Effective communicator - both oral and written form (tech and non-tech), • Proactive, resourceful, delegator and a multitasker, • Exceptional organizational skills with an attention to detail, • Skilled in completing assignments accurately and in a timely manner, • MS Office Suite (Excel, Word, Outlook, PowerPoint, Teams), • Superior analytical, planning and problem resolution skills, • Must be able to provide necessary pro-active recommendations to clients, • Knowledge of general computer hardware & software applications After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to learn and subsequently operate all test equipment within the Laboratory Department, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent, • 1 year of manufacturing or quality experience is a plus but not required, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Working knowledge of measurement instruments: i.e., calipers, etc., • Basic proficiency of Microsoft Excel and Word, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS The Operations Administrator contributes to the coordination of the Sales Department’s strategic and tactical plans. The Sales Operations Coordinator supports the Sales Operations Manager on special projects, Account Management administrative functions, processes, metrics, and training. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Support special projects, such as improvement of delivery and quality metrics Support administrative activities with Sales so that Account Managers can focus on customer contacts. Examples include: help desk ticket management, sending general marketing information, entering contacts/leads, administrative documents, trackers, form completion, etc., • Perform activities as directed by Sales Operations Administrator related to Sales metrics, • Prepare, facilitate, and record training for all Sales personnel Including Sales training plans to onboard new Sales Assistants and Sales personnel., • Maintain Sales EPDS Manual., • Review and update policies and procedures for the Sales Dept., • Meet, coordinate, and support activities with other CTG Departments to ensure alignment on Sales and Operations objectives., • Monitor inbound PO’s and work with Sales to keep dates current/updated as needed., • Monitor RMA/RTV progress; work with sales employees to resolve all issues within the 30 day requirement., • Assess and measure effectiveness of processes, • Audit sales processes and work as needed, • Evaluate unforeseen/unplanned issues that arise with procedures and processes to determine the best course of action., • Maintain and update documents on the Sales team page on the Intranet., • Support the Sales department in OST meetings., • Support sales res during internal audits and when necessary during external audits., • Comply with all customer quality requirements., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • 0-3 years project management, supply chain and/or operations experience., • B.A. /B.S. from an accredited university desired, or equivalent experience; Masters preferred., • Defense and Aerospace experience preferred., • Experience with a QMS and process-driven environment., • Advanced knowledge of Microsoft Office Suite – specifically Outlook, Word, Excel and PowerPoint., • Benefits: Health insurance, Dental insurance, Vision insurance, Retirement plan, Paid time off, Flexible schedule, Parental leave, Professional development assistance., • Open door policy with executives., • Free catered lunch daily., • Annual corporate events. Blue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.Blue Raven Solutions, including Triman Industries, Inc., and Crestwood Technology Group, LLC (collectively, the “Company”) is a portfolio company of AE Industrial Partners, LP (“AEI”), a private equity firm specializing in aerospace, defense & government services, space, power & utility services, and specialty industrial markets. Since August 2019, AEI in partnership with the Company’s management team and other shareholder partners, has been strategically building a unique platform of scale serving the complex military aftermarket with a broad set of capabilities that enable OEMs to increase sales, performance and productivity while allowing military customers to minimize program risks and costs.\r\n\r\nBlue Raven Solutions, headquartered in Morristown, NJ and having decades of operating experience, provides tech-enabled, scaleable supply chain management solutions to over 80 OEM partners and a growing list of military customers including the Defense Logistics Agency (DLA), US Navy, US Army and more. Operating through two divisions, CTG and Triman, the Company provides a broad range of solutions including distribution, program management, obolesence management, counterfeit avoidance, kitting and engineering services in support of mission critical components and systems across a wide variety of long-life military programs. This combination of solutions is supported by the Company’s proprietary, industry leading SEDNATM Analytics platform which drives data-informed decisions and outcomes while keeping fleets operational, ready, and safe.

Electrical Maintenance Manater job duties: Accomplishes electrical maintenance human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees;

Overview: Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Variable Shifts Available Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Knowledge in welding and fabrication, electrical high voltage 480V, hydraulics pumps and motors, able to read electrical and hydraulic schematics Applicants must be at least 18 years of age and legally eligible to work in the United States. * A valid driver’s license is required. CDL preferred. * Experience working on heavy duty diesel equipment OR training from a recognized trade school is required. * Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. * Must be able to meet the physical and safety requirements of the position. * Must be able to provide own tools Requirements and Qualifications:: • 2+ years experience working as a heavy duty Diesel Mechanic, • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Yellow Iron experience and/or experience as a Mechanic or Technician for a refuge company is a plus., • Working knowledge of applicable DOT and OSHA standards and regulations. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is looking for a Full- Time experienced diesel mechanic. MUST have at least 1 to 2 years heavy truck diesel mechanic experience. FULL Time 2nd Shift - Monday thru Friday 12PM to 10PM with 1 or 2 Saturday's a month as needed. Pay is commensurate with experience. Pay range is $27 to $35 an hour. Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Knowledge and ability to perform Preventative Maintenance services with general knowledge related to heavy duty and light duty trucks. This may include gasoline, diesel and CNG Systems. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Aid/assist drivers in completion of the daily Post trip and vehicle safety inspection process, • Conducts safety checks on vehicles and equipment during Safety Lane and PM's., • Complete lubrication and repair of lubrication points on vehicles as assigned on the daily schedule, • Ability to learn and utilize brake inspection procedures and complete documentation daily, • Perform basic repairs and maintenance on Heavy Duty Equipment, including but not limited to Rear Load, Front Load, Roll Off, Grapple, Port-a-let, and other service type trucks including chassis and body., • Communication with A & B technicians /drivers as to issues with vehicles and discusses preventative techniques that may minimize future repairs., • Completes all required paperwork / computer data entry, including documenting parts usage and time in and out on repair orders, in a timely and concise manner., • Maintains a clean, safe work area in compliance with corporate and OSHA standards which may include sweeping, organizing and maintaining the shop and grounds areas., • Conducts repairs utilizing Factory Service Manuals., • Maintain high standard of Ethics and Dependability., • Follows all safety policies and procedures. Requirements and Qualifications::, • Ability to assist drivers with Pre/Post trip process, • Ability to identify visible repairs required on vehicles: lights, mirrors, leaks, body damage etc., • Ability to assist/complete fluid top up on vehicles including oil, hydraulic fluids, transmission fluid, DEF fluid, • Knowledge of tire inspections and air pressure adjustments, • Ability to support technicians in repair of lights, wipers, mirrors., • Ability to understand and use lubrication charts for waste trucks, • Ability to lubricate components on trucks as scheduled (training provided), • Ability to assist technicians in the repair of basic engine, transmission, brake, suspension, electrical, hydraulic, body components and systems related to Heavy Duty and Light Duty Trucks., • Knowledge of all tools required to perform repairs and maintenance on vehicles., • Basic computer skills as required. OTHER JOB RESPONSIBILITIES: • Employees in this job classification must attend and participate in corporation sponsored training courses as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. • Employees in this job classification are responsible for keeping up to date on current technology, as job appropriate, • Any additional job duties that may be assigned by the Supervisor., • Exposure to chemical and residential waste., • Walking, Jogging, Twisting, Crouching, Lifting, • Sufficient stamina for steady work pace throughout the day, • Able to utilize all Personal Protective Equipment as mandated by company, • Physically able to get up and down from the cab of a commercial motor vehicle between 50 and 100 times a day, • Physically able to lift 50 to 75 pounds from the floor to waist height unassisted, • Physically able to lift 50 pounds from the floor to shoulder height unassisted, • Physically able to lift 50 pounds form the floor to overhead unassisted, • Physically able to push and pull 50 pounds unassisted, • Physically able to frequently (100-200 times) bend at the knees and waist, • Physically able to frequently (100-200 times) reach over your head or reach out with extended arms to perform work, • Physically able to frequently (100-200 times) twist at the waist to perform work Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $27.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required., • Competitive wage (based on experience) plus Time and a half for Overtime., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k). We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $30.10/Hr. Salary Range Maximum: USD $50.00/Hr.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Competitive Compensation Responsibilities: • Follow all safety rules and regulations, • Maintain a clean and safe work environment, • Use blueprints, sketches, or building plans to determine electrical requirements and materials needed, • Install new electrical systems and repair existing systems, • Provide bids for work orders, • Interact with customers, suppliers, and other professionalsQualifications:, • Journeyman Electrician License, • Previous experience as an Electrician is preferred, • Valid Drivers License, • Ability to stand for long periods and lift heavy objects, • Strong understanding of mathematical concepts and measurements, • Professional appearance and courteous personality

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Competitive salary, • Employee discounts, • Free uniforms, • Home office stipend, • Opportunity for advancement, • Paid time off, • Relocation bonus, • Signing bonus, • Training & development, • Competitive Compensation, • Career Advancement Opportunities Responsibilities: • Basic knowledge of the electrical code, • Follow all safety rules and regulations, • Maintain a clean and safe work environment, • Use blueprints, sketches, or building plans to determine electrical requirements and materials needed, • Install new electrical systems and repair existing systems, • Interact with customers, suppliers, and other professionalsQualifications:, • 5+ years of Electrical experience, • Valid Drivers License, • Hand tools, • Professional appearance and courteous personality

Job Description Electronic Assembler Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Duties/Responsibilities: • Perform assembly tasks according to established procedures and engineering drawings. Utilize small hand tools, such as soldering irons, wire strippers, crimpers, etc., to assemble components accurately., • Perform assembly tasks according to established procedures and engineering drawings. Utilize small hand tools, such as soldering irons, wire strippers, crimpers, etc., to assemble components accurately., • Create wire harnesses by routing and securing wires, cables, and connectors following specific guidelines and wiring diagrams., • Skillfully strip wire insulation to the required length while maintaining precision and quality standards., • Use appropriate crimping tools to secure connectors, terminals, and contacts onto wires, ensuring reliable electrical connections., • Assemble electronic components onto printed circuit boards (PCBs) using industry-standard techniques and following assembly instructions., • Demonstrate excellent soldering skills by accurately soldering components onto PCBs, wires, or other electronic parts. Ensure solder joints are of high quality and meet the required specifications., • Performs other related duties as assigned. Required Skills/Abilities: • Proficient in reading and interpreting engineering drawings, wiring diagrams, and assembly instructions., • Demonstrates fine eye/hand coordination and meticulous attention to detail, ensuring precision and accuracy in assembly tasks., • Strong commitment to producing high-quality workmanship and adherence to quality specifications. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc107415

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. The Role We are looking for Field Service Technicians who have experience working with Fuel Dispensers and/or Point of Sale equipment. Don't have the experience but interested in working with us, don't worry we will train!! Ideal technician must be able to complete tasks including hanging hardware (repair and/or replacement) and mechanical/electrical issues with both fuel dispensers and point of sale equipment. Must be willing to learn about other systems within the properties to assist in general maintenance needs. • Perform petroleum equipment service and installation calls in a professional, timely, and quality manner., • Complete job paperwork for each service call, at the time of service., • Complete training courses in a timely manner to maintain current certifications and equipment knowledge., • Act as a resource for customers; aid and product support to maintain long term relationships., • Juggle multiple tasks in a fast-paced ever-changing work environment., • Communicate skillfully and effectively in person or over the phone., • High School Diploma or GED, • Positive Attitude, • Attention to Detail, • Minimum of 2 years’ experience or schooling in a Mechanical, Electrical, or Computer Trades, • Proficient in Microsoft Office Suite, • Written and verbal communication skills, • Willingness to work in all varied weather conditions, • Experience with Point-of-Sale installation and repair a plus, • Experience working with Wayne or Gilbarco Dispensers is a plus, • Experience working with Verifone a plus, • Experience in computer networking a plus, • Clean driving record and the ability to work safely, • 10 Paid Holidays, • Flexible Time Off, • 401(k) Company Match, • Health, Dental, and Vision Insurance, • HSA and FSA, • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP)

Job DescriptionAt Rye Subaru, we strive to conduct our business as a well-respected organization; with integrity, hard work, and the highest care for our people, customers, and business partners. Every employee at Rye Subaru is critical to our success. We promise to keep delivering the same award-winning service and value that our community has come to expect from our dealership group throughout the years. Benefits • Hourly rates up to $45 per hour for those who qualify, • Paid Training, • 401(k) Match, • Open at 7:30 am - 5:00 pm Monday - Friday, • Alternating Saturdays from 8:00 am - 3:00 pm, • Paid Vacation, • Closed on Major Holidays - Thanksgiving Day, Christmas Eve, Christmas Day, New Year's Eve, New Year's Day, 4th of July, Memorial Day, Labor Day, • Closed SundaysResponsibilities, • Perform work specified on the repair order with efficiency per dealership guidelines., • Test-drive vehicles, test components, and systems using diagnostic tools and special service equipment., • Diagnose, maintain, and repair vehicle automotive systems, including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor to inform customers if additional service is needed. Provide an estimate for other repairs that are needed, • Execute repairs under warranty to manufacturer specificationsQualifications, • 2+ years of Service Technician experience preferred, • High school diploma or equivalent, ASE Certification a plus, • B - level qualifications, including Diagnostic, Electrical, and Engine Repair, • Mechanical and troubleshooting skills and ability to operate electronic diagnostic equipment, • Basic computer competencies - knowledge of CDK a plus, • Positive, friendly attitude, along with an eagerness to improve, • Enjoy working in a dynamic environment, • Teammate with the ability to collaborate with others effectively, • Ability to learn new technology, repair, and service procedures and specifications, • Valid driver's license and clean driving recordWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionDescription: Are you a skilled mechanic or technician looking to take your career to the next level? Kinsley Power Systems is hiring Field Service Technicians to service stand-by generators throughout the Northeast. If you have experience with engines, electrical systems, or heavy equipment—especially in automotive, trucking, marine, or construction—you may already have what it takes to thrive in this role. We offer specialized training to help you transition into the power generation industry and build a long-term, rewarding career. Kinsley Power Systems, a family-owned business, has been a trusted leader in generator service, sales, and rentals for over 60 years. We’re committed to exceeding customer expectations in a workplace that’s both enjoyable and supportive—where your hard work is recognized and your growth is prioritized. Key Responsibilities and Preferred Experience: • Performing preventative maintenance and repairs on standby generator systems (Ranging from 8kW-1mW), • Troubleshooting, diagnostic testing, load-bank testing and start-ups on generators, • Preparing accurate quotes for repairs and completing/submitting work orders, • Previous experience working on residential or industrial generators, • Exceptional communication and customer service skills, • The ability to participate in an on call, rotating schedule, • Must provide your own tools (multi-meter, hand-tools, etc.), • Very safety focused with an OSHA 10 (or the ability to attain one), • Valid DOT Card (or the ability to attain one) and a valid driver’s license Benefits: • Competitive pay and PTO to keep your work-life balance in check, • Full health benefits package (Medical, Dental, Vision, etc.) + 401(k) with match, • Company-paid certifications and specialized training to grow your skills, • Company vehicle and gas card so you’re always ready to roll, • Uniforms provided, plus annual boot and uniform stipends, • Real advancement opportunities—grow your career with a team that wants to see you succeed, • A chance to work alongside some of the best technicians in the industry in a company that feels like family All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1224B - New Rochelle, NY

Job Description TITLE: QUALITY ADMINISTRATOR DEPARTMENT: COMPLIANCE REPORTS TO: QUALITY COMPLIANCE MANAGER FLSA STATUS: NON-EXEMPT JOB DESCRIPTION REVISION: 09/04/24 BASIC FUNCTIONS The Quality Administrator will provide support to the Quality Compliance team in maintaining a strong overall Quality Compliance Program including the Quality Management System and Supply Chain. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES GENERAL: • Produce detailed Excel, Word, and PowerPoint reports/presentations as needed by Department Leads., • Preparation of Quality Management Reviews, acquiring accurate data necessary to communicate the Quality Management System., • Evaluating QMR data and reporting back findings including but not limited to: trends, areas of concern, etc. to Department Leads., • Update management on open items related to projects., • Coordinate schedules, activities, meeting minutes and follow-up action items., • Provide support to External Provider Qualification program; identify risks and opportunities for improvement., • Provide support for updating all vendor files in EPDS as per approved Vendor Forms., • Assist Compliance team with functions related to document control., • Lead and/or conduct internal audits throughout the organization as directed by the Audit Program Manager in accordance with ISO19011, • Assist personnel with on-the-spot audits and process walk through as requested., • Member of the "Surveys Team", thus responsible for completion of Incoming Self-Assessments as directed by the Director of Contracts., • Training of personnel when requested by Management on any responsible processes., • Act as a backup administrator to the Compliance Regulatory Platform., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules and policies., • Update maintain and grow tracker with any applicable incidents as directed, • May be assigned additional responsibilities as directed by the Quality Compliance Manager QMS TRAINING ADMINISTRATOR: • Input training requirements provided by the Management Representative for all QMS applicable job titles, • Ensure newly onboarded employees are meeting training requirements within the 90-day probationary period, • Ensure training of revised documents are completed within the two-week CTG requirement. Follow up with department heads as needed to ensure trainings are conducted, • Send Weekly Delinquent Training Report to department heads as applicable., • Follow up with department heads regularly to ensure trainings are conducted and training records are closed, • Upload and maintain employee certifications within the Compliance Regulatory Platform, • Monitor employee certification expiration dates and notify department heads accordingly, • Ensure operational employees’ vision exams are up-to-date and notify department heads accordingly STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001, ISO17025 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA- QMS-9090, ASA-100 and supporting construct standards AS6081, AS6171, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Weekly recertification rate to meet annual requirements for External Providers (as needed with Supply Chain designee), • Re-Certification rate average turn time., • Procurement (Sales) Weekly completion rates, • Sub-Tier assessments submitted for completion + return rates., • New Sub-Tiers added monthly., • Closures of all said projects within CTG’s Compliance Project Management tool, • Customer Surveys received and documented monthly EDUCATION / EXPERIENCE / COMPENTENCY • Bachelor’s degree, preferred., • 1-3 years of administrative experience., • Proficiency in MS Office with expertise in Microsoft Word, PowerPoint, Excel and Project Management Tools., • Detail oriented and comfortable working in a fast-paced office environment, • Exceptional communication skills. ALL TRAININGS OUTLINED FOR THIS JOB DESCRIPTION ARE IDENTIFIED WITHIN CRESTWOOD TECHNOLOGY GROUP’S TRAINING MATRIX, LOCATED WITHIN THE LEARNING MANAGEMENT TOOL WITHIN EACH INDIVIDUALS PRE-REQUISITES.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must., • Rational decision making and problem-solving skills. Work Environment • Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1135B - White Plains, NY

Job Description Job Description & Responsibilities The Team Leader plays a crucial role in managing the operations of a Gregorys location. This individual is responsible for ensuring our standards of quality, service, and cleanliness are upheld every hour of every day. The General Assistant Store Leader will be the leader in charge when a Store Leader or Multi-Unit Leader is not present. The Team Leader will work a flexible schedule in conjunction with the other leaders to fully cover the needs of the business during all operating hours. This role will oversee and manage the following: * People Development * Ensure new hires/transfers are onboarded properly to the store and thoroughly acclimated in operational, service, and knowledge functions * Ensure teams are upholding our high standards, leading by example and educating each member of the team * Identify and work with high potential baristas that can be developed into our next great leaders * Operational Standards * Ensure all existing and new operational standards are being executed as prescribed * Assist with training teams on new menu and operational roll outs and ensure proper follow ups are held * Ensure all stores are upholding Department of Health standards and are always well prepared to handle an inspection at any time * Ensure quality standards are met by checking for taste, FIFO rotation, and visual appeal * Ensure stores are kept immaculately clean, organized, and well merchandised at all times * Service Standards * Work side by side with teams to lead by example in 5-star service * Coach teams to have a guest-first mentality at all times regardless of side-duty tasks that need to be completed * Proactively manage customer concerns/issues and coach teams on how to do the same * Become the “Mayor” of your store group and know a significant amount of customers on a first name basis that come into your store * Collect customer business cards/email addresses to build a database that you can promote grass-roots marketing efforts towards to drive loyal business * Minimize guest complaints and work with your SL/Multi-Unit to respond to all Yelp/Google/App/Email comments and go above and beyond for both positive and negative reviews * Facilities & Maintenance * Proactively clean, service, and maintain all equipment and fixtures in your stores * Hold monthly meetings with clear direction for deep cleaning tasks to be accomplished * Quickly react to any major plumbing, electrical, HVAC, equipment, or other facility concerns that can severely impact business * HR Management * Ensure you and your team are compliant with employee labor laws * Ensure changes to labor laws are thoroughly communicated with your teams * Proactively manage employee issues by having regular conversations with every employee on your team, ensuring they have been heard, and working with your SL/Multi-Unit to manage concerns * When necessary, work with your SL/Multi-Unit to deliver coaching conversations, warnings, and terminations with sufficient evidence and documentation that protects the business and the employee’s experience * Financial Performance * Closely manage each of your store’s controllable profit areas: sales, labor, and COGS * Work closely with your team and SL/Multi-Unit to build customer relationships and seek out revenue drivers outside of the 4-walls of the store * Work closely with your team to build an efficient schedule based on the needs of the business, using sales data to drive your decisions * Manage weekly payroll reconciliation ensuring hours and tip distribution are 100% accurate * Manage cash handling responsibilities including cash drawer counts, safe reconciliation, and bank deposits * Actively track inventory/waste levels and ordering activity to ensure your location has sufficient product for service without exceeding COGS targets * Ensure monthly inventory counts are completed and submitted accurately Additional Expectations * This is a hands-on role and a General Assistant Store Leader is expected to work alongside their teams to drive revenue, efficiency, and profitability. Setting and leading by example is what will drive your success * There is no set schedule for this role. A General Assistant Store Leader is expected to be flexible in their stores based on the needs of the business and the development of their people. This includes schedules of early mornings, nights, weekends, and holidays. * Regular communication with your SL/Multi-Unit is expected to keep him/her aware of the state of your businesses and the proactive solutions you are providing * Actively embody our company values and live them every day. * Attend company events and proactively encourage team members to attend as wellGregorys Coffee is a family-run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you.Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. We use eVerify to confirm U.S. Employment eligibility.

Job Description Build your best future with the Easy Ice team- Cool Careers Start Here! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Easy Ice team and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer • Competitive pay, • Company Vehicle & Cell Phone, • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Hands on experience that promotes a growth-oriented culture, • Personal growth opportunities which encourages employees to “think outside the box”, • Challenging and meaningful work that fosters learning and development, • Fun fast-paced company culture and work environment, • Collaborative team environment to support and mentor each other, • Check us Out: Easy Ice What you will do: The Technician I is an exciting and dynamic position that will appeal to a creative, resourceful, high-energy, and organized person who thrives in service-oriented and customer-facing situations. The Technician I is responsible for the installation, preventative maintenance, servicing, and cleaning of our ice machines. This role is critical in ensuring the optimal functionality and cleanliness of our equipment to meet our customers’ service requirements while operating with proficiency. The technician will assist in troubleshooting issues, conduct routine inspections, and execute scheduled maintenance tasks under the supervision of senior technicians. The ideal candidate will possess a keen attention to detail, a commitment to maintaining equipment in good working order, and a willingness to learn and grow within the field of ice machine repair and maintenance. The Technician I is dedicated to driving service success that not only enhances customer satisfaction but also maximizes customer retention through reliable and responsive service. A successful Technician I will drive the following outcomes: • Increase the effectiveness and efficiency of the customer service experience by cleaning, installing and or repairing machines properly the first time, every time, • Increase the effectiveness and efficiency of the customer service experience by maintaining the proper truck stock and vehicle cleanliness and organization standards, • Leave every machine serviced in a condition that makes it easier for other Technicians to follow, • The Technician I performs duties as assigned including the installation of equipment, bagging/delivery of ice, cleaning, repairing, and maintaining ice machines. All levels of Technician - I, II, and III, are responsible for the installation, cleaning, and preventative maintenance of ice machine equipment as required, • Perform comprehensive servicing, installation, and thorough cleaning of ice machines per Easy Ice standard operating procedures to ensure optimal performance and cleanliness, • Communicate effectively with coworkers and customers to ensure all work orders and assignments are completed on time and per Easy Ice standard operating procedures, • Accurately document all actions performed during service visits by taking required photos, completing forms, reports, logs, and maintaining clear records of maintenance activities, • Ensure proper truck stock at all times, avoiding unnecessary return trips and delays in customer service, • Manage the pickup and delivery of ice as needed for service calls, ensuring timely and efficient service for customers, • Identify and report any additional actions required to enhance customer satisfaction, including recommendations for parts replacement, cleaning, or equipment repairs, • Facilitate the processing of accurate payments from customers and assist in the proper shutdown or removal of equipment when necessary, • Assist in maintaining a clean, organized, and safe work environment in the shop when applicable by adhering to all safety protocols and cleanliness standards Education: High school diploma or general education degree (GED) Vocational/Technical Training preferred Experience: • 1-2 years of experience in a customer service-oriented technical role or equivalent combination of education and experience preferred, • Previous experience with ice machines or HVAC maintenance or similar equipment is a plus, • Basic understanding of mechanical systems and electrical components related to ice machines or similar equipment, • Familiarity with troubleshooting techniques and standard repair practices, • Strong communication skills to effectively interact with customers and team members, • Problem solving abilities and a proactive approach to addressing issues, • Ability to manage time effectively and prioritize tasks to ensure service calls are completed in a timely manner, • Skills in maintaining organized records and documentation of service activities, • Demonstrated track record of delivering highest level of customer satisfaction Additional Required Attributes: • High-energy individual with a positive attitude and strong commitment to customer satisfaction, • Willingness to learn and adapt to new technologies and service protocols in the field of ice machine repair and maintenance, • The employee is often required to stand; walk; sit; use ladders; use hands to manipulate, handle, or feel surfaces, parts and tools; reach with hands and arms and stoop, kneel, crouch, or crawl, • Occasionally lift and/or move up to 75 pounds, • Stands for extended periods of time (6+ hours per day), • While the noise level in the work environment is usually somewhat quiet, the worker may be subject to elevated noise levels, • Drive a vehicle for up to 60 percent of the hours worked, • Ability to work flexible shifts and adapt to changing work schedules The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job Description We're Hiring: Commercial Gas/Oil Burner Service Technician We are proud to partner with a family-owned, industry-leading commercial boiler services company that has been serving clients for over 80 years. Their longevity and success stem from a commitment to customer care and consistently delivering the highest level of boiler service. The company specializes in boiler repair, cleaning, inspection, water treatment, welding, fabrication, and a full range of related services for all types of commercial boilers. Due to continued growth, they are seeking a skilled Commercial Gas/Oil Burner Service Technician to join their team. Immediate Opening – Apply Today! Benefits: • Union Health Insurance, • 401k, • Pension, • Health insurance, • Company service vehicle (Dispatched From Home!), • Paid vacation, sick leave, and holidays, • Company-provided tools, • Service and repair high-capacity commercial and industrial Gas/Oil burners, and heating systems., • Conduct combustion analysis and make necessary adjustments to ensure system efficiency and compliance with emissions standards., • Troubleshoot electrical and mechanical faults in burner and boiler systems., • Perform preventative maintenance and inspections on commercial Gas/Oil heating systems., • Replace and calibrate system components such as fuel pumps, nozzles, motors, ignition transformers, and control panels., • Document all work performed and parts used; complete service and maintenance reports., • Ensure all work is compliant with local, state, and federal codes and regulations., • Assist in commissioning newly installed commercial burner systems., • 3+ years of experience in servicing commercial Gas/Oil burner systems, • Knowledge of Building Automation Systems (BAS) and integration with burner controls., • Familiarity with emissions testing protocols and reporting., • Valid Gas/Oil burner technician license or certification (as required by state/local authorities)., • Strong understanding of combustion theory, burner controls, and boiler operation., • Experience working with large mechanical systems, including hydronic and steam boilers., • Ability to read and interpret schematics, technical manuals, and blueprints., • OSHA 30 certification

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

In this position, you will: • Build on your Electrical/Computer engineering knowledge and develop strong Systems Engineering and troubleshooting skills • Develop a deep understanding of the design and development of naval nuclear power plants and the functions of instrumentation and control sy

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a si

Aerotek - JobID: JP-005544237 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.