Electrical training jobs in Troy, New YorkCreate job alerts

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Troy, New York. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Troy, New York., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $62,400-$89,440 annual salary/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $30—$43 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Job Overview: Express Employment Professionals is seeking a dependable and experienced HVAC Technician to join their growing team. This role is responsible for diagnosing, servicing, repairing, and installing residential heating and cooling systems, with occasional light commercial work. The ideal candidate will have strong troubleshooting skills, mechanical aptitude, and a commitment to providing exceptional customer service. Job Type: Full-Time | Direct Hire Pay: $25.00 - $45.00/hour, depending on experience and certifications Benefits: Health Insurance Paid Time Off Paid Holidays Retirement Plan Options Company Vehicle (for qualified technicians) Ongoing Training and Professional Development Opportunities for Advancement Tasks: Perform residential HVAC service, repair, maintenance, and installation work (primary focus) Diagnose and repair residential heating, cooling, and ventilation systems Install new HVAC equipment, including furnaces, air conditioners, heat pumps, boilers, and mini-split systems Perform preventative maintenance and seasonal service calls Complete emergency service calls as needed to restore customer comfort and system functionality Assist with light commercial HVAC service, repair, and installation projects as needed Inspect equipment and identify necessary repairs or replacements Ensure all work complies with safety standards, building codes, and company procedures Communicate findings and recommendations clearly to customers Complete service reports, work orders, and related documentation Maintain tools, equipment, and company vehicle in a clean and organized manner Qualifications: Previous HVAC service, installation, and repair experience required Residential HVAC experience required Commercial HVAC experience is a plus but not required EPA Certification preferred Strong mechanical and electrical troubleshooting abilities Ability to read and interpret technical manuals, wiring diagrams, and blueprints Valid driver's license with a clean driving record Ability to work independently and manage service calls efficiently Excellent customer service and communication skills Ability to lift up to 50 pounds and work in various indoor and outdoor environments Ability to respond professionally to emergency service situations and after-hours calls when scheduled for on-call duty (One weekend monthly) Schedule: Monday – Friday - 7AM to 4PM Technicians remain on duty until all scheduled service calls are completed Overtime opportunities available To Apply: Submit an online application here. Need help with your resume? Visit www.expresspros.com/JobGenius/ You should be proficient in: • Electrical Systems Diagnostics & Repair, • Environmental Protection Agency (EPA) Certification, • HVAC Maintenance, • HVAC Repair, • Maintenance and Repair Skills, • Equipment Repair & Maintenance Machines & technologies you'll use: • HVAC Systems

Job Description About Stampede Ventures, Inc. Stampede Ventures provides a diverse portfolio of full-service construction, renovation, and civil work to meet the needs of Government and private sector customers. We leverage our experience to provide our customers with the best possible pricing and high-quality service on all projects we perform. Our senior management team has more than 100 years of facility maintenance, repair, renovation and construction experience, primarily serving the U.S. Government. About this position: HVAC Mechanic Location – Albany, NY The Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job. Other duties may be assigned. To perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the position. Wage/Salary Range: $25.00 - $45.00 per hr. Applicants will be notified via phone or email within ten (10) business days of submittal. Essential Duties & Responsibilities • Travel daily to perform needed preventive maintenance on the HVAC and other equipment as needed., • Complete PM checklists and close out the work order in Maximo. Uploading documents and photos as needed to document work performed., • Perform minor repairs on building equipment as needed during visits. (Faucets, flushometers, change light bulbs), • Work with subcontractors for services we do not have capability to offer., • Maintain excellent customer relations during job performance Interacting with all levels of management, • Carry out repair, maintenance, or installation of equipment for the generation, utilization, or distribution of commercial systems, • Perform inspection, maintenance, adjustment, and repair of equipment to ensure constant and reliable indoor air comfort, as well as laboratory or critical environments, • Handle and repair test equipment, complex centrifugal chillers, direct expansion and chilled water-based cooling systems, large air handlers, electronic and pneumatic direct digital control systems, and air distribution systems, • Operate, procure, introduce, and get back HFC, HCFC, and CFC refrigerants, • Perform repairs and maintenance of reach in, walk in, stand alone ice machines, central plan chillers, pumps, free standing A/C units, refrigerators, roof top cooling units, and guest rooms A/C units, • Maintain inventory of parts and supplies of air conditioning and refrigeration equipment, • Design an effective preventive maintenance program to ensure maintenance of equipment is scheduled and carried out regularly as at when due, • Carry out chemical test on cooling tower and chilled water loop as required, • Ensure proper air circulation on the air handler by balancing airflow, • Assess vendor specifications and proposals and give recommendations to the customer; supervise material purchase following customer’s ordering procedures, • Perform low voltage wiring; handle BAS system Direct Digital Controllers (DDC), • Diagnose and effect mechanical, plumbing, and electrical repairs to HVAC equipment, • Carry out regular periodic plumbing and maintenance tasks as needed Required (Minimum Necessary) Qualifications • Education Requirements: High school education or GED equivalent, • Level of Experience Requirements: 5-10 years of experience maintaining and repairing HVAC equipment., • Must be able to pass an extensive background check, • Must have a valid driver’s license and transportation, • Should own the basic tools needed to perform maintenance on the equipment, • Must be able to pass drug screening, • EPA 608 Certification for refrigerant (Type 1 and Type 2). Knowledge, Skills, Abilities, and Other Characteristics • Knowledge of multiple types of HVAC systems (Mini-splits, Rooftop Units, Chillers-Air Cooled, etc), • Good mechanical/electrical/plumbing skills as related to HVAC equipment., • Ability to lift and carry weights up to 75 lbs., • Ability to work with little supervision., • Ability to travel daily within the Designated area. Our company has locations in 3 states with multiple locations, • Knowledge of organizational procedures and workflows – understanding how work moves through a company., • Basic knowledge of relevant technologies or tools – e.g., Microsoft 365, communication platforms, or industry‑standard software., • Knowledge of customer service practices – principles of providing quality service and managing inquiries professionally., • Knowledge of data privacy and confidentiality principles – awareness of proper handling of sensitive information., • Communication skills (written and verbal) – ability to convey information clearly and professionally., • Time management and prioritization – balancing multiple tasks and meeting deadlines., • Problem‑solving and critical thinking – analyzing issues and selecting appropriate solutions., • Interpersonal and teamwork skills – building rapport and collaborating effectively with others., • Attention to detail – producing accurate, error‑free work. Preferred • 10-15 years of experience maintaining and repairing HVAC equipment., • Experience with maintaining multiple locations., • EPA 608 Certification for refrigerant (Universal).., • Controls Knowledge a plus. Supervisory Responsibilities • This position will not have supervisory responsibilities. DOT Covered/Safety-Sensitive Role Requirements • This position is not subject to federal requirements regarding Department of Transportation “safety-sensitive” functions. Necessary Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this role. Employees must always maintain a constant state of mental alertness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians may be required to walk/stand/sit for extended periods as needed. Travel to and from work sites is accomplished via company owned vehicle(van/truck). Work at customer locations includes the need to bring tools to and from the work vehicle to multifloored buildings Work Environment The work environmental characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of the role. Employees must always maintain a constant state of situational awareness. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Technicians will report to the Project Manager daily for assignments unless scheduled for deployment to a job site. Additional Qualifying Factors As a condition of employment, you will be required to pass a pre-employment drug screening and have acceptable background check results. If applicable to the contract, you must also obtain and maintain the appropriate clearance levels required and must also be able to obtain access to military installations. Shareholder Preference BSNC gives hiring, promotion, training, and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment without regard to any status protected by state or federal law, or any other basis prohibited by law.

Job Description Van Hook Service Company Inc. was founded in 1973 and currently services thousands of locations throughout New York and Pennsylvania. A great opportunity at a growing company! We have multiple positions available, we offer the highest pay scale based on experience, full benefits at no cost to the employee, large 401k contributions, overtime opportunities available, you will not find better benefits anywhere in the HVAC industry. A fully equipped service truck, training, cell phone, all tools and support needed to get the job done are provided by the company. Come work at a company that values its employees and provides the highest level of service to its customers through integrity, excellence, innovation and professionalism. HVAC Technician Job Description We are looking to hire a detail-oriented HVAC technician to install, maintain and repair HVAC systems. The HVAC technician will be skilled in cleaning, adjusting and repairing systems. You will guide and advise the customer to select the most appropriate air quality system to fulfill their requirements. You will be responsible for air quality systems from installation to end-of-life by performing maintenance, warranty, and emergency repairs. To be successful in this role, customer satisfaction, safety and communication should be your top priority. Ideal candidates will be patient and have excellent organizational and troubleshooting skills. HVAC Technician Responsibilities: • Installing, maintaining, and repairing ventilation and air conditioning systems and equipment., • Diagnosing electrical and mechanical faults for HVAC systems., • Cleaning, adjusting, and repairing systems, and performing warranty services., • Performing emergency repairs promptly and efficiently., • Keeping daily logs and records of all maintenance functions., • Complying with service standards, work instructions and customers' requirements., • Assisting with customers' queries. HVAC Technician Requirements: • High school diploma, GED or suitable equivalent., • 2+ year experience as an HVAC technician, and willingness to continue education in HVAC field., • Valid driver’s license., • Understanding principles of air conditioning, refrigeration, and heating., • Excellent written, verbal, and interpersonal skills., • Ability to work after hours when scheduled. Work Remotely • No Job Type: Full-time Benefits: • 401(k), • Company Vehicle, • Dental insurance, • Health insurance, • Health savings account, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Retirement plan, • Tuition reimbursement, • Vision insurance Schedule: • 8 hour shift, • On call, • Overtime Education: • High school or equivalent (Required) Experience: • HVAC: 2 years of field experience or equivalent License/Certification: • Driver's License (Required), • EPA Certification (Preferred), • OSHA 10 (Preferred) Work Location: Multiple locations \nCompany Description Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish Van Hook Service Co. is a leader in the commercial HVAC/R industry, known for top-tier pay, excellent benefits, and long-term career opportunities. As a third-generation, family-owned business established in 1973, we proudly serve all of New York State and Northern Pennsylvania. Our team services all types of HVAC/R equipment and control systems and has the expertise to complete a wide range of construction projects from start to finish

Job Description $35-$45+ per hour | Full-Time | Year-Round Work | Capital Region, NY You're good at HVAC. You should work somewhere that recognizes it. Choice Heating & Cooling is looking for an experienced HVAC Service Technician or Lead Installer to join our team. We're not looking to fill a truck with just anybody. We're looking for someone who knows the trade, takes pride in doing good work, treats customers right and wants to work with other experienced HVAC professionals. If you're currently working for another HVAC company, that's okay. In fact, that's probably who we're looking for. Why consider Choice? -NO summer on-call. From May 1 through September 30 -No 24-hour on-call shifts during heating season. We believe you should be able to have a life outside of work. $35-$45+ per hour based on experience and ability. If you're an exceptional technician, we're willing to have a conversation about what you're worth. -Steady, year-round work. -Work on more than basic furnaces and AC. Our team works with heat pumps, high-efficiency equipment, ductless, inverter systems, controls and other modern HVAC technology. -We're looking for HVAC professionals - not high-pressure salespeople. We want technicians who can diagnose problems, explain options honestly and take care of the customer. A company where your experience matters. We're big enough to provide stability, benefits and opportunities, but small enough that you're not employee #437. What We Offer • $35-$45+ per hour based on experience, • Overtime opportunities, • No summer on-call, • Limited heating-season on-call, • Year-round, full-time work, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • 401(k) with company match, • Paid time off, • Training and continuing education, • Modern HVAC equipment and technology, • ServiceTitan, • Opportunities to continue advancing within the company Who We're Looking For We're interested in talking with experienced service technicians, lead installers, or someone strong in both. Ideally, you can confidently handle several of the following: • Residential HVAC troubleshooting and diagnostics, • Air conditioning and heat pumps, • Gas furnaces and heating systems, • Ductless systems, • Electrical and controls troubleshooting, • Refrigeration, • Equipment replacement and installation, • Startup and commissioning, • Communicating professionally with homeowners Already Have a Job? Let's Keep This Simple. You don't need to decide today that you're leaving your current company. You don't even need a resume to start the conversation. Call or text us at our office number and say "Interested in the job." We'll have a confidential 10-minute conversation about pay, schedule, the position and what you're looking for. If it sounds better than what you have now, we'll set up a time to meet. If it doesn't, no hard feelings. Good HVAC technicians have options. If you've been wondering whether there's a better opportunity out there, we'd like the chance to show you what Choice Heating & Cooling has to offer!

Job Description A leader in the energy industry since 1930, Main-Care Energy is proud to be 100 percent employee-owned. We are one of the oldest employee-owned companies in New York State, and we’re looking to expand our team with the right candidates. We’re looking for career-minded, full-time General Laborer to assist HVAC Technicians throughout our service area. There are five locations to choose from. Job Summary: The General Laborer for HVAC Technicians supports HVAC professionals in the field by performing various manual labor tasks related to the installation, repair, and maintenance of HVAC systems. The role requires physical stamina, a willingness to learn, and the ability to follow instructions closely. Compensation and Benefits include: • Employee Stock Ownership Plan, • Annual Performance Award (Bonus), • 401(k) With Company Match, • Medical Insurance, • Vision & Dental Insurance, • Life Insurance, • Short-/Long-Term Disability Insurance, • Immediate Vacation Time, • Sick/Personal Days, • 8 Paid Holidays, plus 2 Floating Holidays, • Bereavement Time, • Merit Raises & Promotion Opportunities, • Employee Pricing & Purchasing Programs, • Educational Assistance Program, • Uniforms at no cost, including weekly cleaning, • Monthly Peer Recognition Award, • Yearly Allowance for Safety Shoes Key Responsibilities: • Assist HVAC technicians with the installation and maintenance of heating, cooling, and ventilation systems., • Carry and transport tools, materials, and equipment to and from job sites., • Cut and assemble materials (such as ductwork, pipes, etc.) under supervision., • Clean job sites after installation or repair work, including the removal of debris., • Load and unload HVAC materials and equipment from trucks or storage facilities., • Prepare work areas by setting up ladders, safety equipment, and required materials., • Assist with wiring and basic electrical work related to HVAC systems under supervision., • Provide general labor support as directed by the lead HVAC technician or supervisor., • Ensure compliance with safety procedures and wear appropriate personal protective equipment (PPE) at all times. Skills: • Good communication and teamwork skills., • Problem-solving and a proactive attitude., • Ability to follow detailed instructions and safety protocols., • Basic math skills for measuring and cutting materials. Career Path: This position can serve as a starting point for a career in the HVAC industry. With additional training and experience, a general laborer may progress to a full HVAC technician role. This description can be tailored further based on the specific needs of an employer. Requirements Qualifications: • High school diploma or GED preferred., • Prior experience in construction or a related trade is a plus but not required., • Ability to lift and carry heavy objects (up to 50 lbs)., • Basic knowledge of hand and power tools., • Willingness to learn and follow instructions., • Strong work ethic, punctuality, and attention to detail., • Ability to work in various environmental conditions, including outdoor job sites and confined spaces., • Valid driver’s license required., • Reliable transportation. Benefits Compensation and Benefits include: • Employee Stock Ownership Plan, • Annual Performance Award (Bonus), • 401(k) With Company Match, • Medical Insurance, • Vision & Dental Insurance, • Life Insurance, • Short-/Long-Term Disability Insurance, • Immediate Vacation Time, • Sick/Personal Days, • 8 Paid Holidays, plus 2 Floating Holidays, • Bereavement Time, • Merit Raises & Promotion Opportunities, • Employee Pricing & Purchasing Programs, • Educational Assistance Program, • Uniforms at no cost, including weekly cleaning, • Monthly Peer Recognition Award, • Yearly Allowance for Safety Shoes

Job Description Overview The Diesel Technician maintains diesel equipment, completes inspections and preventive maintenance requirements, corrects vehicle deficiencies, completes adjustments and alignments, and maintains records to ensure we are able to keep our level of commitment to safety and customer service. Technicians at Casella participate in a Career Pathways Program that offers exceptional Advancement Opportunity and Regular Merit Increases. This is a 2nd Shift position with anticipated hours of 2 pm to 12 am. Starting hiring range is $24-$40 per hour based on experience which would include a shift differential. Position comes with a $2,000 annual tool allowance. #INDSJ Responsibilities • Performs all job duties in accordance with company safety policies and regulations., • Performs maintenance tasks based on driver pre and post trip inspections in a timely manner or as directed by maintenance manager., • Maintains diesel equipment operation by completing inspections and preventative maintenance requirements and makes appropriate corrections when needed., • Works in adverse conditions at times including heat, cold, wind, rain and snow to repair equipment and vehicles., • Builds and assembles machines or mechanical components according to requirements., • Troubleshoots reported problems and resolve them in a timely manner., • Maintains all relevant records for all work and procedures and reports on issues., • Performs accurate lockout/tagout procedures., • Runs diagnostic tests on vehicles and analyzes the results to problem solve; test drive vehicles to diagnose malfunctions when necessary., • Perform any and all necessary procedures to ensure maximum reliability and the safety of the equipment operator including, performing preventative maintenance inspections, tire changes, changes of breaks and any other utilities that are part of the vehicle; builds, rebuilds, and replaces hydraulic components and hoses of any vehicle or stationary equipment., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Career Path Definitions & Distinctions Technician Apprentice: Demonstrates the ability to work alongside a knowledgeable Casella Waste Diesel Technician to learn and further develop skills. The Apprentice provides maintenance, repairs vehicles and equipment, and mainly focuses on preventative maintenance and maintaining the safety of all vehicles and equipment. Technician B: Demonstrates the ability to identify operating issues including examining, test driving and troubleshooting electrical and mechanical problems using standard testing procedures and computer diagnostic equipment. Technician also demonstrates the ability to correct any operating issues that are found. Technician A: Demonstrates the ability to inspect, troubleshoot, and repair vehicle brakes, suspension, steering, tires, rims, hubs, PTO, hydraulics, engine, cooling, starting, ignition, charging, lighting systems, fuel and air intake systems, heating, ventilation, and cooling systems to ensure vehicles are in safe and dependable operating condition. Master Technician: Demonstrates the ability to inspect, troubleshoot, and repair all vehicle and equipment systems. Can rebuild and replace engines, engine components, transmissions, drive line and rear-ends, mechanical systems, electrical systems, and hydraulic components. Qualifications The successful candidate will have a High School Diploma or GED, must be at least 18 years of age, hold a valid Class A, B, or C Driver’s license and must be legally eligible to work in the United States. The candidate must have a minimum of 1-year experience inspecting, troubleshooting, and repairing trucks and stationary equipment. Excellent verbal and written communication skills, effective listening and problem-solving skills, and dedication to providing excellent customer service is desired. It is also important that the candidate has demonstrated the ability to work as part of a team in a collaborative environment. Ability to perform physically demanding tasks including frequent lifting of heavy components, pushing, pulling, crouching, climbing and consistent standing, walking and grasping. This job operators in both, garage/shop conditions, and outside of the shop which may include various weather conditions. This position requires successful completion of pre-employment testing, including a drug screen.

Job Description ⚡ Power the Future with AEC Solar — Now Hiring Residential Solar Electricians! ⚡ Position Title: Residential Solar Electricians Company Name: AEC Solar Energy Corp Pay Range: $20–$40 per hour + Bonuses (Signing Bonus, Performance Bonus, Year-End Bonus) Employment Type: Full-Time Location: Albany, NY Industry: Solar, Electrical, Roof, General Construction Job Overview AEC Solar Energy Corp is seeking skilled Residential Solar Electricians to join our Field Operations team. In this role, you will install, maintain, troubleshoot, and repair solar photovoltaic (PV) and energy storage systems across residential, commercial, industrial, and government projects. You’ll work hands-on with renewable energy technology, support system commissioning, and ensure all electrical work meets NEC and local code requirements. This is an exciting opportunity to join a well-established, fast-growing company in one of the world’s most important industries: clean energy in a company that has been solid and local for over 30 years. Who We Are Founded in 1991, AEC Solar Energy Corp (www.AECsun.com) and www.AECenergy.com, AEC is a long-standing leader in energy efficiency and renewable energy solutions. With over three decades of continuous growth, AEC provides stability, opportunity, and a collaborative culture where every team member has a voice. We encourage learning, personal development, and career advancement—empowering employees to grow into new roles within the rapidly expanding energy sector. As a family-oriented company, we support work-life balance, flexibility, and a culture of open communication. Key Responsibilities Install, assemble, and commission solar panels, inverters, battery systems, and related electrical equipment. Perform AC and DC wiring, grounding, interconnection, and integration into building or grid electrical systems. Troubleshoot system malfunctions, perform repairs, and complete preventive maintenance (inspections, inverter testing, performance checks). Ensure all work is performed in accordance with NEC, local codes, and strict safety procedures (including Lock-Out-Tag-Out). Maintain and enforce safety and compliance standards (OSHA, fall protection, PPE). Conduct system testing and commissioning, such as IV curve tracing and performance validation. Read, interpret, and complete electrical diagrams, schematics, and service documentation. Use computer systems such as CMMS or Salesforce for reporting and documentation. Assist in training and guiding junior technicians or apprentices. Communicate effectively with customers, project managers, and team members regarding project status and system functionality. Safely work on rooftops, ladders, elevated surfaces, and outdoor environments. Qualifications Preferred: 3+ years of experience in electrical work or related fields. Valid state or local Journeyman Electrician License preferred (for Electrician roles). 1–2 years of experience in solar PV installation, service, or maintenance is highly beneficial. High school diploma or equivalent required; vocational electrical training is a plus. Strong working knowledge of electrical systems, components, and diagnostic tools. Ability to read and interpret blueprints, schematics, and manufacturer specifications. Experience with hand tools, power tools, and electrical testing equipment. Familiarity with DAS/SCADA systems is a plus. Ability to work at heights and in various weather conditions; able to lift 50–80 lbs. Strong communication, problem-solving, and leadership skills. Attention to detail, teamwork, and a commitment to safe work practices. Benefits Signing Bonus paid in milestones over 14 months Unlimited overtime available (optional Saturday work) Medical, Dental, and Vision Insurance Health Savings Account (HSA) Life & Disability Insurance Options Paid Time Off (Vacation, Sick, Holidays) Paid Parental Leave & Childcare Assistance 401(k) Retirement Savings Program Tuition Reimbursement Paid Training & Certifications (SunPower, Tesla, Generac) Tool Replacement Program Travel projects with per diem Volunteer Time Off (VTO) Company Events, Company Vehicle (for applicable roles), Uniforms, Employee Rewards Profit Share / Bonus Programs Long-term career advancement in a stable, growing company Schedule Monday – Friday Optional Saturday overtime Full-time, on-site field operations Consistent hours with opportunities for extended shifts based on workload Work Location Onsite in Albany, NY and surrounding areas Field-based across residential and commercial project sites Occasional travel projects supported with per diem Equal Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Compliance A background check will be completed as part of the onboarding process, in compliance with applicable laws. #Joveo

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description H. L. Gage Isuzu Trucks of Albany, New York is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Isuzu Service Technician. This opportunity is part of the Isuzu Veterans Apprenticeship Program (IVAP), a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program designed to help qualified Veterans transition into the commercial truck industry. Through IVAP, participants may gain hands-on dealership experience while working toward successful completion of apprenticeship and certification requirements. IVAP connects qualified applicants with participating Isuzu dealerships seeking skilled technical talent. Qualified applicants receive recruiting support, technical screening, dealership referral assistance, and guidance through the Registered Apprenticeship and GI Bill® benefits process, where eligible. What You Will Do As an Isuzu Service Technician Apprentice, you may support dealership service operations by assisting with the inspection, diagnosis, maintenance, and repair of Isuzu commercial vehicles. This may include working alongside dealership service teams, participating in on-the-job learning, and completing program-related apprenticeship requirements. Ideal candidates may have experience in one or more of the following areas: • Wheeled vehicle maintenance, • Diesel mechanics, • Heavy equipment maintenance, • Automotive repair, • Aircraft maintenance, • Generator maintenance, • Fleet maintenance, • Military maintenance supervision Requirements • Transitioning Service Member or U.S. Military Veteran status, • 3–5 years of military or civilian technician work experience, • Honorable military discharge or Commander’s Statement of Service, • Hands-on experience with diesel, automotive, heavy equipment, aircraft, generator, fleet maintenance, or related mechanical systems, • Ability to provide work references, • Clean driving record, as attested by the applicant, • Ability to complete the IVAP technical assessment, • Ability to pass applicable dealership background, driving record, or drug screening requirements Preferred qualifications include: • Diesel engine maintenance or repair experience, • Experience with commercial trucks, fleet vehicles, or heavy equipment, • Familiarity with diagnostic tools, hand tools, and shop equipment, • Experience working with electrical, braking, suspension, HVAC, or driveline systems, • ASE certifications, technical school training, or military maintenance training, • Strong troubleshooting, communication, and teamwork skills Benefits Isuzu IVAP Apprenticeship Highlights • Potential full-time employment with a participating Isuzu dealership, • Program designed specifically to support Transitioning Service Members and U.S. Military Veterans, • Participation in a U.S. Department of Labor and GI Bill®-approved Registered Apprenticeship program, where eligible, • Eligible Veterans may apply for and receive GI Bill® benefits during the apprenticeship, where eligible, • Access to tools, equipment, vehicles, and training needed to complete apprenticeship and certification requirements, as provided through the participating dealership and IVAP program structure, • Opportunity to apply military mechanical experience toward a civilian Isuzu Service Technician career, • Recruiting support, technical screening, dealership referral assistance, and apprenticeship process guidance Hiring decisions, wages, employee benefits, employment offers, and employment conditions are determined by the participating Isuzu dealership. Applicants are applying for employment with a participating Isuzu dealership and not with Isuzu Commercial Truck of America, Inc. or Educational Resource Systems, Inc. GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). Use of the term does not imply endorsement, affiliation, or approval by VA.

Job Description Join Our Team of Employee Owners!Why work for a company, when you can own it? Siewert Equipment, a division of Cummins-Wagner, is seeking a Field Service Mechanic. Cummins-Wagner Company, Inc. is a leader in the distribution of industrial and mechanical equipment. From our thirteen (13) office locations, Cummins-Wagner specializes in the sale and service of pumps, heat exchangers, boilers, water heaters, cooling towers, and air compressors. As an employee-owned company, there is a unique opportunity for growth in a team environment. Job Title: Field Service Mechanic Department: Rochester Service Department Location: Albany, New York Reports To: Service Manager Job Overview: The Service & Repair Mechanic performs hands-on technical services for a wide variety of pumps, controls, and other types of rotating equipment. This position requires a motivated professional with a high degree of technical aptitude to provide both in-shop and field service to support Industrial and Municipal customers throughout upstate NY. Essential characteristics include good communication skills, customer service skills, teamwork, attention to detail, ability to work independently, and flexibility for reasonable travel. Our most successful Field Service Mechanics: • High school education. Mechanical and/or electrical background required, • Mechanical background required, • Comfortable working with residential or municipal customers is a plus, • Reasonable experience & proficiency with mobile devices and computers, • Minimum 2 years of pump or other rotating equipment maintenance & repair experience preferred, • 240VT Electrical experience is a plus, • Machining experience is a plus, • Effective verbal & written communication skills, • Complete company-paid factory training, • Ability to reach, bend, stoop, and frequently lift up to 50 lbs. unassisted, 100 lbs. assisted, • Must be able to pass background and reference checks; as well as a drug test, • Must maintain an active, REAL ID compliant driver’s license with a clean driving record, or a valid U.S. passport, as required for access to federal facilities Scope of Responsibility: • Repair, maintenance, and troubleshooting of pumps, blowers, motors, and controls, • Equipment start-up commissioning and training, • Prepare and maintain clear and accurate documentation for assigned work, • Build and maintain positive relationships with customers, coworkers, and suppliers, • Maintain a safe, organized, clean & resourceful work environment to include the shop, individual work areas, and service vehicle, • Understand and adhere to all safety-related policies, rules, and guidelines, • Participate in on-call rotation for after-hours service, • Frequent day travel throughout upstate NY with some overnight travel required, • Perform all other duties as assigned

Job Description Overview The Container Repair Mechanic performs repairs, maintenance and installs compactors and other stationary equipment, executes work on hydraulics, completes basic electrical operations and welds and fabricates to maximize safe and productive operations. The starting hourly rate for this position is $25 per hour. Responsibilities • Performs inspections, conducts diagnostic tests, preventative maintenance, and repairs on varied types of compactors and other stationary equipment., • Reads electrical schematics, diagnoses and repairs electrical problems on equipment including working with high-voltage electricity., • Reads hydraulic schematics, diagnosis and repairs hydraulic issues on equipment., • Maintains knowledge of proper installation of compactors and other types of stationary equipment, performs or assists with installations as scheduled and meets relevant deadlines., • Ensures and maintains efficiencies so that all scheduled jobs can be handled in a given day., • Completes paperwork and enters data associated with repairing relevant equipment in an accurate and timely manner., • Participates in training and other learning opportunities to expand knowledge of the company, products, sales and services and performs any other duties needed to help drive our vision, fulfill our mission, and/or abide by our core values. Qualifications The successful candidate will have a high school diploma or GED, be at least 18 years of age, and be legally eligible to work in the US. A demonstrated ability to work as part of a team in a collaborative environment is expected. Equipment maintenance and repair experience is preferred. Excellent listening, communication and problem solving skills, proven work commitment and a dedication to safety are required. Welding and fabrication skills are desired.

Job Description Quality Repair Solutions (QRS®) is a comprehensive tractor and trailer repair and maintenance business that specializes in pressurized tankers. QRS ensures professional drivers get back on the road safely and quickly. We are looking for an energetic, reliable Trailer Mechanic to join our team in Albany, NY. We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QRSShops.com. Compensation and Incentives • Weekly Competitive Pay is $26.31 - $31, • Tool/Boot Reimbursement Program, • Referral Program, • This is a union position and is eligible for benefits per the collective bargaining agreement. Please contact your Facility Manager or the Union Steward for additional information., • Weekly PayJob DetailsJob Summary: Responsible for diagnosing, repair, and perform preventative maintenance on semi-truck trailers and tractors, including tasks like brake adjustments, tire replacements, electrical troubleshooting, basic structural repairs, and more, all while working out of a service truck and adhering to strict safety regulations; general repairs on tractor and trailer units in accordance with DOT, federal and state regulations and company standards. Uses technical publications or automated systems in maintaining vehicles to prescribed manufacturers’ maintenance schedules and for researching parts. Properly annotates all maintenance and labor performed in maintenance management software. Duties and Responsibilities:, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day and HM-183 inspections (tankers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Order and receive parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Perform miscellaneous duties as assigned., • Perform HM-183 DOT inspections on tankers (P,V,I,K,L,HS,UC,) (EPA-M27).RequirementsSkills and Abilities:, • Must possess at least 3 years of experience in repair and service of trailers, hazmat tankers, and medium duty trucks., • Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems., • Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations., • Ability to use vehicle diagnostic software., • Minimum of 2 years as a fleet mechanic. Education and Experience:, • Minimum of 3 years of DOT HM-183 certification, Training or experience. ASE Certification not required but recommended., • High school diploma, completion of G.E.D. required. Additional Job InformationPosition Type/Expected Hours of Work:, • This is a full-time position, and days and hours of work are Monday through Friday, hours depend on location.Company InformationWork Environment:, • The shop has a climate similar to outdoor weather. Frequent exposure to loud machinery, air tool operation, hammering and engine noise.Physical Demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Ability to push, pull, or lift up to 75 lbs., • Able to fit into a 20” cargo trailer dome opening., • Able to meet safety standards for fall protection harness – max weight 310 lbs. (includes all PPE worn), • Use their hands to handle, control, or feel objects, tools, or controls., • Stand for long periods of time., • Walk for long periods of time., • Bend or twist their body., • See differences between colors, shades, and brightness. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunities Quality Carriers, Inc. Provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

We are looking for a reliable and experienced Janitorial Cleaner to perform a variety of cleaning duties to ensure a clean, safe, and orderly environment across assigned facilities. This role plays a critical part in maintaining the overall appearance and sanitation of the workplace, contributing to a positive experience for employees, clients, and visitors. Pay: $17.00 per hour The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _ A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. • Perform routine cleaning tasks including sweeping, mopping, vacuuming, dusting, and polishing floors and surfaces, • Clean and sanitize restrooms, replenish supplies, and ensure hygiene standards are met, • Empty trash and recycling bins and waste in accordance with company policies, • Clean windows, mirrors, and other glass surfaces, • Maintain and store cleaning equipment and supplies properly, • Report any maintenance issues, safety hazards, or supply shortages to the supervisor, • Assist with setup and cleanup for meetings, events, or special projects as needed, • Follow all safety procedures and company protocols related to cleaning and sanitation Required: • High school diploma or equivalent preferred, • Previous experience in janitorial, custodial, or general cleaning roles is a plus, • Ability to work independently and manage time effectively, • Familiarity with cleaning chemicals, equipment, and safety standards, • Strong attention to detail and commitment to quality About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

The Valet provides professional, courteous and compassionate guest services. Pay rate: $17.00 per hour. The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _ A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 88M, 31B, LS, 3531, 5811, 3P0X1, 2T1X1 • Coordinate traffic flow, • Communicate valet procedure, information and directions clearly and effectively with guests., • Understand and respond appropriately to basic customer and team member inquiries., • Monitor illegal parking, and immediately store vehicles., • Interact with guests in a friendly manner • Assist guests with loading and unloading, • Collect and secure guest keys, • Predict and communicate traffic flow peaks and lot issues, • Identify and arrange for extra support for extended wait times., • Accurately tally and split the tip pool, • Receive and receipt a variety of valet payments, • Accurately reconcile and report daily revenue, • Project currency and coin requirements and re-order as necessary., • Operate, park and retrieve all vehicles in a safe manner by obeying all traffic laws, Facility policies, and applicable pedestrian regulations., • Work in an outdoor unprotected environment in all climates for extended periods of time, • Keep work area clean of debris. Required: • Must be 21 years of age, • Must possess a valid driver’s license, • Must be able to operate both standard and automatic transmissions About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Job DescriptionAssembler Pay: $29.50–$32/hour Location: Outside of Albany, NY Employment Type: Direct Hire OR Full-time, Long Term Temp with possibility to hire If you like working with your hands, don't mind a mix of tools and machinery, and take pride in putting something real together from start to finish, this could be the job for you. Our client is looking for an Assembler to join their manufacturing team, building large industrial products related equipment. What You'd Be Doing You'd be part of a team assembling and disassembling complete equipment packages, working with a mix of hand tools, pneumatic and electric tools, cranes, and forklifts. It's varied, hands-on work that covers a lot of ground on any given day, including: • Mechanical assembly of major components, • Aligning motors and compressors, • Assembling and installing electrical boxes, including wiring and connections, • Running instrument wiring and piping, • Installing oil and water piping, • Performing pressure testing, • Following all safety rules, regulations, and OSHA requirements What You'll Need • High school diploma or equivalent, • One year of training in an electrical or mechanical field, or two years of equivalent hands-on experience, • Ability to read and understand assembly and wiring drawings To see a full listing of all our open positions, please visit: https://www.redshiftrecruiting.com/jobs-hiring-near-me redShift Recruiting is the region's premier recruiting agency with over 100 years of combined experience in the recruiting field. We specialize in permanent, temporary, and temp-to-hire positions. Our superior service combined with our highly qualified and carefully selected bank of candidates sets us apart.

We're seeking a Electrical Maintenance Planner II who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. \n \n Job Title: Electrical Maintenance Planner II | Req ID: 18065 | HR Contact: Grace A CHIODO| Location: Ravena Cement Plant NY\n \n ABOUT THE ROLE\n \nAn electrical maintenance planner II is responsible for developing and managing a comprehensive schedule of preventive and corrective maintenance tasks for electrical systems within a facility, utilizing a computerized maintenance management system (CMMS) to plan work orders, identify potential issues, allocate resources, and ensure optimal equipment reliability and safety by coordinating with electricians and other relevant departments.\n \n WHAT YOU'LL ACCOMPLISH\n \n\n • The Electrical Maintenance Planner II is responsible for the implementation of more complex and larger scale plans in the Amrize Maintenance Management System (MMS) - e.g., MAC/SAP in all aspects of electrical maintenance activities. From work identification through planning, scheduling and execution, working with other planners to divide work out appropriately.\n, • The Electrical Maintenance Planner II is responsible for the accuracy and continuous updating of maintenance master data - part numbers, bills of materials, work order history, etc. within the Maintenance Management System and partnering with the Maintenance Manager to identify and reconcile any discrepancies.\n, • The Electrical Maintenance Planner II is responsible to ensure the equipment maintenance strategy for predictive and preventative maintenance, repair and annual maintenance, as established by the Electrical Manager, is realized in the daily, weekly and monthly maintenance plan.\n, • The Electrical Maintenance Planner II is responsible for adding pertinent information to work orders, as required, to facilitate the comprehension of the execution team. This includes defining a clearly the scope of work to be performed, establishing the preparatory work required prior to scheduled equipment down time, developing a detailed job plan with all the work sequences involved to adequately complete the repairs, as well as equipment downtime and work-hours required, including partnering with other planners to resolve issues and identify opportunities.\n, • The Electrical Maintenance Planner II is responsible for determining the cost involved for parts and supplies for each work order and ensuring that such costs are communicated and forecasted accurately to maintenance management.\n, • The Electrical Maintenance Planner II will work closely with procurement and warehousing to ensure that all nonstock parts and materials as required by the job plan.\n, • The Electrical Maintenance Planner II will lead the annual budgeting process and monthly forecasting for maintenance spending.\n, • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n \n WHAT WE'RE LOOKING FOR\n Education: Bachelor's degree with at least 5 years of required experience or at least 8 years of equivalent experience with HS Diploma / GED\n Field of Study Preferred: Electrical\n Required Work Experience: 5 years\n Required Training/Certifications: Basic understanding of electrical components such as relays and breakers\n \n Additional Requirements:\n \n\n • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests.\n\n \n WHAT WE OFFER \n \n\n • Competitive salary\n, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings\n, • Employee Stock Purchase Plan\n, • Medical, Dental, Disability and Life Insurance\n, • Holistic Health & Well-being programs\n, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care\n, • Vision and other Voluntary benefits and discounts\n, • Paid time off & paid holidays\n, • Paid Parental Leave (maternity & paternity)\n, • Educational Assistance Program\n, • Dress for your day\n\n \n \n#LI-Onsite \n \n Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.\n \n \nWe thank all applicants for their interest; however, only those selected for an interview will be contacted.\n \n BUILDING INCLUSIVE WORKSPACES\n \nAt Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! \n \n \nAmrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States.\n \n \nIn compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process.\n \n \nWhile we sincerely appreciate all applications, only candidates selected for an interview will be contacted.\n \n PROTECT YOURSELF FROM RECRUITMENT FRAUD\n \nThe only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Position Title: Solar Electrician Installer Company Name: AEC Solar Energy Corp Pay Range: $20–$40 per hour + Bonuses (Signing Bonus, Performance Bonus, Year-End Bonus) Employment Type: Full-Time Location: Albany, NY Industry: Solar, Electrical, Roof, General Construction Job Overview AEC Solar Energy Corp is seeking skilled Solar Electricians Installer to join our Field Operations team. In this role, you will install, maintain, troubleshoot, and repair solar photovoltaic (PV) and energy storage systems across residential, commercial, industrial, and government projects. You’ll work hands-on with renewable energy technology, support system commissioning, and ensure all electrical work meets NEC and local code requirements. This is an exciting opportunity to join a well-established, fast-growing company in one of the world’s most important industries: clean energy in a company that has been solid and local for over 30 years. Who We Are Founded in 1991, AEC Solar Energy Corp (www.AECsun.com) and www.AECenergy.com, AEC is a long-standing leader in energy efficiency and renewable energy solutions. With over three decades of continuous growth, AEC provides stability, opportunity, and a collaborative culture where every team member has a voice. We encourage learning, personal development, and career advancement—empowering employees to grow into new roles within the rapidly expanding energy sector. As a family-oriented company, we support work-life balance, flexibility, and a culture of open communication. Key Responsibilities • Install, assemble, and commission solar panels, inverters, battery systems, and related electrical equipment., • Perform AC and DC wiring, grounding, interconnection, and integration into building or grid electrical systems., • Troubleshoot system malfunctions, perform repairs, and complete preventive maintenance (inspections, inverter testing, performance checks)., • Ensure all work is performed in accordance with NEC, local codes, and strict safety procedures (including Lock-Out-Tag-Out)., • Maintain and enforce safety and compliance standards (OSHA, fall protection, PPE)., • Conduct system testing and commissioning, such as IV curve tracing and performance validation., • Read, interpret, and complete electrical diagrams, schematics, and service documentation., • Use computer systems such as CMMS or Salesforce for reporting and documentation., • Assist in training and guiding junior technicians or apprentices., • Communicate effectively with customers, project managers, and team members regarding project status and system functionality., • Safely work on rooftops, ladders, elevated surfaces, and outdoor environments. Qualifications • Preferred: 3+ years of experience in electrical work or related fields., • Valid state or local Journeyman Electrician License preferred (for Electrician roles)., • 1–2 years of experience in solar PV installation, service, or maintenance is highly beneficial., • High school diploma or equivalent required; vocational electrical training is a plus., • Strong working knowledge of electrical systems, components, and diagnostic tools., • Ability to read and interpret blueprints, schematics, and manufacturer specifications., • Experience with hand tools, power tools, and electrical testing equipment., • Familiarity with DAS/SCADA systems is a plus., • Ability to work at heights and in various weather conditions; able to lift 50–80 lbs., • Strong communication, problem-solving, and leadership skills., • Attention to detail, teamwork, and a commitment to safe work practices. Benefits • Signing Bonus paid in milestones over 14 months, • Unlimited overtime available (optional Saturday work), • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA), • Life & Disability Insurance Options, • Paid Time Off (Vacation, Sick, Holidays), • Paid Parental Leave & Childcare Assistance, • 401(k) Retirement Savings Program, • Tuition Reimbursement, • Paid Training & Certifications (SunPower, Tesla, Generac), • Tool Replacement Program, • Travel projects with per diem, • Volunteer Time Off (VTO), • Company Events, Company Vehicle (for applicable roles), Uniforms, Employee Rewards, • Profit Share / Bonus Programs, • Long-term career advancement in a stable, growing company Schedule • Monday – Friday, • Optional Saturday overtime, • Full-time, on-site field operations, • Consistent hours with opportunities for extended shifts based on workload Work Location • Onsite in Albany, NY and surrounding areas, • Field-based across residential and commercial project sites, • Occasional travel projects supported with per diemEqual Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Compliance A background check will be completed as part of the onboarding process, in compliance with applicable laws. #Joveo

Location: Latham, NY, US 12110\n Job Type: Full Time\n Job Classification: Salaried\n Exemption Type: Exempt\n Education: Bachelor's Degree\n Travel: None\n \n \n Description\n \n \n Are you ready to take your electrical engineering career to the next level? C.T. Male Associates, a highly reputable professional services firm in the Northeast, is looking for a Senior Electrical Engineer to lead meaningful projects in renewable energy, new building and renovation designs, and electrical code reviews with our team in Latham, NY. \n What You’ll Do: \n\n • Develop and drive the electrical design process for new building systems and renovation projects, including NEC load calculations, service/feeder/branch panel design, generator sizing, and lighting design (including photometric studies).\n, • Collaborate and coordinate with other disciplines to ensure a fully integrated design.\n, • Support PV solar and other renewable energy projects, working with high-voltage DC, low-voltage AC, and medium-voltage AC systems.\n, • Prepare engineering studies and schematic design for new systems and analyze operations of existing systems.\n, • Utilize computer aided design technologies and modeling software to develop designs, sketches, drawings, and construction documents (AutoCAD and Revit).\n, • Apply engineering software for electrical design and evaluations.\n, • Ensure design quality and coordination, verifying that all documents align with project intent and requirements.\n, • Facilitate project documentation both internally and externally, coordinating with clients and other design professionals.\n, • Support project managers with scheduling, budget tracking, and overall project execution.\n, • Assist with performance studies, which may include site visits and data collection.\n\n Pay Range: $105,000 - $130,000 per year, paid weekly, commensurate with experience and qualifications. \n \n Requirements\n \n \n What We’re Looking For: \n\n • Bachelor’s degree in Electrical Engineering or related field.\n, • Licensed Professional Engineer (P.E.).\n, • Ten plus (10+) years of experience in electrical engineering, design, or related field, including four plus (4+) years of licensed work.\n, • Familiarity with AutoCAD and strong technical skills.\n\n Preferred Qualifications: \n\n • Experience with Revit and engineering software such as SKM, EasyPower, O-Calc Pro, PLSCADD, E-TAP, or Visual Studio.\n\n Benefits & Perks: \n\n • Competitive salary & performance-based bonuses.\n, • Comprehensive benefits package (health, dental, vision, retirement, etc.).\n, • Flexible work options (hybrid potential).\n, • Professional development support (training, conferences, certifications).\n, • Ownership opportunities and career growth.\n\n EOE, including disability/vets. \n \n \n Compensation details: 105000-130000 \n \n \n \n \n PI463c5643c100-25405-37210231

Job Description Position Title: Rooftop Solar Technician Company Name: AEC Solar Energy Corp Pay Range: $20–$35 per hour + Bonuses (Signing Bonus, Performance Bonus, Year-End Bonus) Employment Type: Full-Time Location: Albany, NY Industry: Solar, Electrical, Roof, General Construction Job Overview AEC Solar Energy Corp is expanding and looking for skilled and motivated Rooftop Solar Technicianr to join our growing team in Albany, NY. We are hiring 6 new team members for our Roofing, Electrical, and General Construction Crews. As a Lead Foreman or a Crew member / Installer, you’ll help manage and execute residential and commercial solar and storage projects—ensuring each system is built safely, efficiently, and to the highest standards. This is your opportunity to grow in one of the fastest-growing industries, with unlimited overtime, hands-on training, and long-term career development in a company that has been solid and local, for over 30 years. Who We Are AEC Solar Energy Corp (www.AECsun.com) and www.AECenergy.com, AEC has been a trusted name in energy efficiency and renewable energy since 1991. With over three decades of expertise, we are proud to deliver innovative solar solutions for residential, commercial, industrial, and government clients. Our team-first culture empowers every employee to grow, lead, and contribute to a sustainable future. At AEC, you’re more than a number—you’re part of a family-driven company that values growth, flexibility, and career opportunity. Key Responsibilities • Install photovoltaic (PV) systems in both residential and commercial settings., • Lead or assist with the layout and assembly of roof- or ground-mounted solar racking systems., • Interpret and review project site plans, ensuring accurate installation to spec., • Use hand and power tools to complete system builds., • Work on pitched rooftops and climb ladders as part of daily tasks., • Label components and complete system documentation., • Communicate clearly and respectfully with customers on-site., • Maintain and enforce safety and compliance standards (OSHA, fall protection, PPE)., • Ensure quality workmanship and attention to safety and cost-efficiency throughout each project. Qualifications • 3+ years of experience in solar, roofing, electrical, or general construction preferred., • Comfortable working at heights (rooftops, ladders)., • Proficient with hand tools and power tools., • Ability to work outdoors year-round in varying conditions., • Positive and clear communication style; strong team collaboration., • High attention to detail and accountability., • NABCEP certification or similar is a plus, but not required. Benefits • Signing Bonus (paid in milestones over the first 14 months), • Unlimited Overtime Available (Saturday work optional), • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA), • Life and Disability Insurance Options, • Paid Time Off (Vacation, Sick, Holidays), • Paid Parental Leave + Childcare Assistance, • 401(k) Retirement Plan, • Tuition Reimbursement & Paid Training, • Tool Replacement Program, • Career Path Growth Opportunities, • Company Events, Trips, and Team Outings, • Uniforms Provided, • Vehicle and Per Diem for Travel Projects, • Volunteer Time Off (VTO) Schedule • Full-Time: Monday – Friday, • Optional Saturday Overtime Available, • 8+ hour shifts with flexibility depending on project needsWork Location, • On-site in Albany, NY, • Field-based across residential and commercial solar installation sites, • Occasional travel projects with per diem supportEqual Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Compliance A background check will be completed as part of the onboarding process, in compliance with applicable laws. #Joveo

Job Description Are you Ready to Launch Your Career? Join us in our mission as a Maintenance Technician at Catholic Charities of Housing Office. Imagine yourself as part of an organization with a profound commitment to making a positive impact. When you choose Catholic Charities, you step into a world of endless opportunities, where your efforts collectively contribute to a brighter community. We consider it a privilege to make a meaningful difference, and we love what we do. As the Maintenance Technician, you will play a pivotal role in individuals' lives, making a significant impact through: • Perform routine maintenance tasks including but not limited to painting, dry wall, minor carpentry, plumbing, electrical, and HVAC repairs, • Utilize CMMS for work order management, • Participate in Section 8, Building Code, and Regulatory Agency inspections, • Ensure that maintenance shop and storage areas are organized, tidy, and secure, • Inspect facilities for safety hazards, and take appropriate action Maintenance Technician Minimum Salary: $20.00 Maintenance Technician Maximum Salary: $22.00 Maintenance Technician Schedule: Monday-Friday; 35 hours per week Subject to call rotation for night and weekend maintenance emergencies Qualifications: • High School Diploma/GED, • 1-3 years of maintenance experience, • 1-3 years of experience working with a diverse population, • Valid NYS Driver's License We value work-life balance and offer some stellar benefits: • For benefit-eligible positions:, • Health/Dental/Vision/Life Insurance, • Retirement planning options, • Generous Time Off (as an eligible employee, you will accrue up to 23 days off in your first year, based on your standard work day), • Click here for our Benefits Brochure, • Employee Assistance Program, • Employee Discounts (movie tickets, hotels, flights, amusement parks, etc.), • Exciting referral bonuses, • Ongoing training and development, • Recognition and Awards, • Career Growth, • A collaborative team culture Catholic Charities is proud to be an Equal Opportunity Employer, fostering a workplace where every individual can shine their brightest. Applicants have rights under Federal Employment Law: Family and Medical Leave Act (FMLA) Equal Employment Opportunity (EEO) Know Your Rights Employee Polygraph Protection Act (EPPA)

Job Description We’re looking for an experienced Forklift Mechanics to join our team in the Schenectady/Albany area. Take your mechanical skills on the road — and be the person customers rely on. Also searching: diesel mechanic, heavy equipment mechanic, field service technician, used equipment mechanic $29 – $39/hour + Up to $8,000 Sign-On Bonus Hourly pay — you’re paid for every hour worked (not flat rate) Schedule: Monday–Friday, 8:00 AM – 4:30 PM (with overtime opportunities as needed) At Thompson & Johnson Equipment, our mechanics don’t sit in a shop all day — they’re out in the field solving problems, helping customers, and making a real impact. What You’ll Do • Diagnose, troubleshoot, and repair forklifts and material handling equipment (electric, gas, and diesel), • Perform planned maintenance and safety inspections, • Use computer-based diagnostics and OEM resources to identify and resolve issues, • Manage and maintain your service van inventory, • Communicate directly with customers to explain repairs and recommend solutions, • Complete work orders accurately and on time, • Deliver quality work — fix it right the first time, • BE A HERO What Makes This Role Different • Road-based work – no shop environment, • Variety – different customers and challenges every day, • Local travel – serving the Schenectady and surrounding region, • Consistent weekday schedule — home most nights, • Hourly pay structure — no flat rate pressure What You Bring • Minimum of 3-4 years of mechanical training and or experience (forklifts, heavy equipment, automotive, diesel, etc.), • Strong troubleshooting and diagnosing skills across hydraulic, electrical, and mechanical systems, • Ability to work independently with minimal supervision, • Solid communication and customer service skills, • Valid driver’s license with a clean driving record, • Willingness to work overtime as reasonably needed What We Offer • $29 – $39/hour based on experience (hourly — no flat rate), • Up to $8,000 sign-on bonus, • Company-provided service van, tablet, phone, uniforms, • Paid training + OEM certifications Benefits that actually make a difference: • Medical insurance as low as $5/week + FREE vision, • Dental, life, and supplemental coverage such as LTD, STD, Specified Disease like Cancer, Heart, Stroke and Kidney insurance, • 401(k) with 50% company match (up to 5%), • Generous PTO + holidays (extra for Veterans) Additional perks: • $500 annual tool allowance, • $600 annual well-being reimbursement, • $200 annual gym membership, • $100 annual boot allowance, • $100 annual company clothing allowance Why Thompson & Johnson? We’re a third-generation, family-owned company serving Upstate NY with a reputation for taking care of both our customers and our employees. • Average employee tenure: 10+ years, • Voted a Best Places to Work company by our employees (8 years running), • A culture built on teamwork, respect, and doing things the right way This is a place where mechanics build long-term careers and get promoted into service writers, lead techs, mentors, coaches, trainers, managers — not just punch a clock. Work Environment This is a hands-on, physical role requiring lifting, climbing, and working indoors and outdoors in all seasons. Prerequisites Profile assessment, physical (including eye, hearing and lead test) and drug testing for illegal substances. Apply Today If you’re an experienced mechanic who takes pride in your work and enjoys solving problems independently — we’d love to talk! Thompson & Johnson is an Equal Opportunity/Affirmative Action Employer, (M/F/D/V) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Job Description The Rosenblum Companies is looking to hire a full-time Building Maintenance Technician to support our Multifamily Property Management team. We’re proud to have been named Developer of the Year in 2024, one of Albany’s “Best Places to Work” for ten years and Times Union’s “Top Workplaces”! About us: The Rosenblum Companies is one of the Capital District's largest fully integrated real estate development and management companies. Our portfolio encompasses over 1.7 million square feet of award-winning office, industrial, retail, self-storage (ValuSpace® Personal Storage), and residential mixed-use properties, notably The News Apartments and Vicina – Modern Urban Flats, both in Troy, NY, as well as the company’s own flexible workplace brands, Hone Coworks and Launchbox Flexible Warehouse Suites. For nearly four decades, Rosenblum has focused on creating and sustaining Better Spaces . We’re proud to have been named Developer of the Year in 2024 and one of Albany’s “Best Places to Work” and Times Union’s “Top Workplaces”! Major Accountabilities: Property Conditions • Ensure interior and exterior of properties meet RDC standards., • Inspect buildings, maintain cleanliness, functionality, and quality of common areas, amenities, and grounds., • Identify and address any deficiencies, recurring issues, or potential hazards, ensuring corrective actions are taken promptly to preserve asset integrity and support operational excellence. General Maintenance & Repairs • Complete work orders in a timely and efficient manner in accordance with company standards. Ensure appropriate close-out., • Perform routine and corrective maintenance on building systems, including electrical, plumbing, HVAC, mechanical, and structural components., • Monitor building systems, perform troubleshooting and escalate as needed., • Diagnose issues and carry out repairs for lighting, doors, locks, appliances, fixtures, drywall, flooring, other building components and etc., • Interface with tenants and guests onsite to support a positive experience with our product. Preventive Maintenance & Inspections • Conduct scheduled preventative maintenance tasks and inspections of equipment and mechanical systems to reduce downtime and prolong asset life., • Maintain logs, reports, and documentation for preventive maintenance activities. Vendor, Team & Customer Communication • Communicate effectively with property managers, leasing teams, and customers., • Communicate with outside contractors and vendors when necessary., • Provide input on maintenance needs and capital improvement recommendations. Minimum Job Requirements • Minimum GED or equivalent; accredited trade school or relevant experience; relevant training through an apprenticeship program., • Minimum three (3) years of responsible experience performing a variety of building maintenance duties., • General building maintenance and construction knowledge; including basic carpentry, electrical, plumbing, and HVAC., • OSHA 10 & Fair Housing certification completed within 90 days of hire., • Knowledge of safe work practices, basic computer and smartphone usage., • Ability to operate a variety of building maintenance equipment, machines, and power/hand tools., • Ability to work a rotating monthly on-call schedule for nights and weekends and to arrive early during snowstorms., • Ability to travel between locations is required. As such, reliable transportation and a clean driving record is necessary., • Ability to work overtime as required., • Proven ability to build and maintain quality relationships with tenants, vendors, and team members. Working Conditions & Physical Effort The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee may be required to engage in physical activity including walking, bending, stooping, lifting, carrying, reaching, use fingers and hands to handle or feel, and talk or hear. The ability to sit or stand as needed, potentially for prolonged periods, is required., • Ability to lift up to 50 pounds or more with assistance and work off ladders as needed., • Ability to work in a variety of environmental conditions. Work may take place indoors in an office or residential environment with low to moderate noise levels requiring the individual to moderate the volume of speech and devices or it may include activity at company properties that involves moderate exposure to elements such as extreme temperatures, dirt, dust, pets, smoke, fumes, unpleasant odors, and/or loud noises. Compensation RDC offers competitive compensation, paid time off, company-paid health, dental, vision, disability and life insurance, and a company-matched 401(k) plan, along with training and career advancement opportunities. Apply now! If you are looking to join a collaborative team that always goes above and beyond, has an innate attention to detail, and takes the long view in everything we do, this a perfect opportunity for you. This is a direct-hire opportunity. Google reviews: https://www.rosenblumcompanies.com/reviews/ Disclaimer: The Rosenblum Companies do not accept unsolicited assistance from search firms, employment agencies, or third-party recruiters for any employment opportunities. Please refrain from making phone calls or sending emails to any employee of The Rosenblum Companies regarding this opening. All resumes submitted by search firms, employment agencies, or third-party recruiters to any employee of The Rosenblum Companies via email, the Internet, or in any form and/or method without a valid written search firm agreement in place for this position will be considered the sole property of The Rosenblum Companies; no fee will be paid if The Rosenblum Companies hires a candidate as a result of the unsolicited referral or through other means.

Job Description Looking for a Service technician to service boilers, steam and hot water with their burners and auxiliary systems. Looking to expand more into the HVAC side to include the controls and support systems. Must have an advanced knowledge of electrical and boiler operation and must be familiar with controls for a burner/boiler system. Must be willing to take service calls on weekends and work after hours occasionally. We are the heart of many manufacturing plants they depend on us to keep them running. Duties consist of: Keeping a clean uniform/attire we supply with employee paying a portion. Have a good driving record Able to drive over 1 hour to a service call at times Maintain an organized work van Must have good troubleshooting skills Be able to work on your own Be a self starter Organized Able to read blueprints and schematics Understand the operation of Pumps and valves Have a more than basic understanding of being in an industrial environment for your safety a priority \nCompany Description You can work on your own mostly and get help when needed rather quickly. If there is a training that you want and can benefit our work here we want it also. We believe things are changing and controls are taking over so Jack shaft/Linkage days are fading but not gone. If you understand controls some that is great. The service manager will teach you anything you need to know about the boilers and all systems you will be working on. You working without any incidents is our goal. Riding along is not an issue. You will most likely be riding along another tech for 2 weeks up to a month. You can work on your own mostly and get help when needed rather quickly. If there is a training that you want and can benefit our work here we want it also. We believe things are changing and controls are taking over so Jack shaft/Linkage days are fading but not gone. If you understand controls some that is great. The service manager will teach you anything you need to know about the boilers and all systems you will be working on. You working without any incidents is our goal. Riding along is not an issue. You will most likely be riding along another tech for 2 weeks up to a month.\n

Job DescriptionDescription: The Manufacturing Maintenance Mechanic performs preventative maintenance and/or repairs of dairy production and processing equipment such as engines, motors, pneumatic tools, conveyor systems, as well as utility related equipment. Duties will also include maintenance of building and support equipment. • Perform preventative maintenance as required on all industrial equipment in the plant including but not limited to conveyers, hydraulics, pneumatics, welding (arc/Heli-arc), gearboxes/drives, valves/pumps, federal fillers, n8 filler., • Able to troubleshoot and repair electrical systems up to 480v, 3 phase, read, and interpret electrical drawings., • Directs and coordinates assembly, fabrication, and installation activities to ensure equipment and systems conform to engineering design and internal specifications and standards., • Recommends design modifications to eliminate machine or system malfunctions or to improve safety, quality, or equipment operating parameters., • Interprets specifications, blueprints, and job orders to workers, and assigns duties., • Ensure compliance with all company policies, plant rules and regulations., • Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring., • Inspects and measures parts to detect wear, misalignment, or other problems., • Realigns and adjusts functional components and control instruments., • Locates damaged air and liquid hydraulic pipes, lines, or wires., • Starts machine and equipment to test operation following repairs., • Performs set-up and operates metalworking tools (i.e., drill press, grinder, etc.) for the repair or creation of existing parts., • Weld equipment and parts as needed., • Reads and understands schematic flowcharts and technical manuals., • Must follow GMP’s, SOP’s, and SSOP’s always., • Uses all personal protective equipment provided by the company in compliance with OSHA regulations., • Installs equipment for new electrical services (120v, 240v and 480v three phase), including wiring, conduit, panels, breakers, contactors, relays, times, and controls., • Performs electrical troubleshooting, maintenance, and repair work; installs or replaces circuit breakers, fuses, variable speed., • Diagnose refrigeration and electrical problems using technical drawings (for example, blueprints, electronic/mechanical schematics) and diagnostic tools (for example, multi-meter, laptop)., • Performs and assists in all operations maintenance activities. All applicable work is done in accordance with National, State and Local Electrical Codes., • Uses the company's computerized maintenance management system to record and access maintenance related information., • Assist the machine operators with training or troubleshooting to minimize equipment downtime. Ensure all repairs are documented., • Assist in training other maintenance staff as needed., • Thorough knowledge of electrical codes, practices, and techniques, tools, and equipment., • Considerable knowledge of and ability to use standard hand and power tools and equipment used in electrical maintenance activities., • Ability to use ladders, scaffolding, and operate hand and power tools in a safe, efficient manner., • Minimize water usage and the generation of wastewater within the scope of the position., • Follows all DFA GMP s and works in a manner consistent with all corporate and regulatory, food safety, quality, and sanitation requirements., • Assist as needed on all types of maintenance calls throughout the plant.Requirements:, • High School Diploma/GED or Technical School, • Minimum 3 years of skilled industrial maintenance experience., • Possess training / experience in at least two or more of the following Areas: Single and three phase industrial electricity and control systems AC/DC drive Systems Pneumatics / hydraulics systems Welding practices and techniques Machining /fabricating practices and techniques Industrial boiler operations Water Treatment Systems HVAC Systems., • Must be able to work a flexible schedule including weekends and holidays., • Successfully pass pre-employment drug screen. Preferred Skills: • Considerable knowledge and application of safety standards and precautions pertaining to electrical work., • Training and experience in use of PLC's is a plus., • Prior experience in a food or bottling manufacturing environment a plus., • Ability to interpret simple to complex blueprints and schematics., • Proficient in Preventative Maintenance, over-hauls, modification, and fabrication., • Strong trouble shooting and problem-solving skills., • Able to read, write and speak English., • Ability to work in a fast-paced environment., • College Degree

Job Description Position Title: Rooftop Solar Technician Company Name: AEC Solar Energy Corp Pay Range: $20–$35 per hour + Bonuses (Signing Bonus, Performance Bonus, Year-End Bonus) Employment Type: Full-Time Location: Albany, NY Industry: Solar, Electrical, Roof, General Construction Job Overview AEC Solar Energy Corp is expanding and looking for skilled and motivated Rooftop Solar Technicianr to join our growing team in Albany, NY. We are hiring 6 new team members for our Roofing, Electrical, and General Construction Crews. As a Lead Foreman or a Crew member / Installer, you’ll help manage and execute residential and commercial solar and storage projects—ensuring each system is built safely, efficiently, and to the highest standards. This is your opportunity to grow in one of the fastest-growing industries, with unlimited overtime, hands-on training, and long-term career development in a company that has been solid and local, for over 30 years. Who We Are AEC Solar Energy Corp (www.AECsun.com) and www.AECenergy.com, AEC has been a trusted name in energy efficiency and renewable energy since 1991. With over three decades of expertise, we are proud to deliver innovative solar solutions for residential, commercial, industrial, and government clients. Our team-first culture empowers every employee to grow, lead, and contribute to a sustainable future. At AEC, you’re more than a number—you’re part of a family-driven company that values growth, flexibility, and career opportunity. Key Responsibilities • Install photovoltaic (PV) systems in both residential and commercial settings., • Lead or assist with the layout and assembly of roof- or ground-mounted solar racking systems., • Interpret and review project site plans, ensuring accurate installation to spec., • Use hand and power tools to complete system builds., • Work on pitched rooftops and climb ladders as part of daily tasks., • Label components and complete system documentation., • Communicate clearly and respectfully with customers on-site., • Maintain and enforce safety and compliance standards (OSHA, fall protection, PPE)., • Ensure quality workmanship and attention to safety and cost-efficiency throughout each project. Qualifications • 3+ years of experience in solar, roofing, electrical, or general construction preferred., • Comfortable working at heights (rooftops, ladders)., • Proficient with hand tools and power tools., • Ability to work outdoors year-round in varying conditions., • Positive and clear communication style; strong team collaboration., • High attention to detail and accountability., • NABCEP certification or similar is a plus, but not required. Benefits • Signing Bonus (paid in milestones over the first 14 months), • Unlimited Overtime Available (Saturday work optional), • Medical, Dental, and Vision Insurance, • Health Savings Account (HSA), • Life and Disability Insurance Options, • Paid Time Off (Vacation, Sick, Holidays), • Paid Parental Leave + Childcare Assistance, • 401(k) Retirement Plan, • Tuition Reimbursement & Paid Training, • Tool Replacement Program, • Career Path Growth Opportunities, • Company Events, Trips, and Team Outings, • Uniforms Provided, • Vehicle and Per Diem for Travel Projects, • Volunteer Time Off (VTO) Schedule • Full-Time: Monday – Friday, • Optional Saturday Overtime Available, • 8+ hour shifts with flexibility depending on project needsWork Location, • On-site in Albany, NY, • Field-based across residential and commercial solar installation sites, • Occasional travel projects with per diem supportEqual Employment Opportunity Statement We are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other legally protected status. Compliance A background check will be completed as part of the onboarding process, in compliance with applicable laws. #Joveo

Job Description Commercial/Industrial - Boiler/Burner/Controls Specialist - Albany, NY & Western MA If you like to show off your troubleshooting skills and are a strong customer-focused Technician then we want you! Experienced C&I burner, controls, combustion technicians wanted! We're Blake Thermal Sales & Service, Inc., and we are the official representative of Cleaver Brooks, Camus, and many other C&I equipment manufacturers in the thermal energy industry. We are looking for boiler and burner technicians with a focus on advanced control systems. Don't worry if you're not a "specialist", we are interested in technicians at all levels from apprentices to senior level personnel We offer factory training and certifications, as well as on the job training. Members of our team are all thermal energy & mechanically/electrically minded, self-managed, and extremely customer-focused. OUR COMPANY: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers. Blake Thermal Sales & Service Inc. is a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 99-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. • Sole focus on integrating and supplying engineered products, services, and complete thermal systems, • Longstanding relationship as a manufacturer's representative with a 99-year history, • Premier product supported by factory authorized local technicians For more information about our company, please visit our website via the following link: https://www.blakethermal.com/ Ideal Candidates will be in alignment with Blake Thermal's Core Values: • Customer Focused, • Opportunity is Earned, • Solutions Provider, • Trustworthy, • Driven to Succeed, • Confident but Humble JOB DESCRIPTION: Seeking several Field Service Boiler/Burner/Controls Technicians. Experience is a big plus however we will train apprentices as well. Position primarily requires a positive attitude with solution-oriented approach to problem solving. Must take pride in your work and have ability to work as part of a team. As factory authorized service technicians, we demonstrate the highest levels of professionalism and capability to support our equipment. World-Class customer service and efficiency is our goal! If you are driven to establish a career in this industry but do not have the experience in essential functions listed below; you should still apply if you can meet our responsibilities/expectations and physical demands. ESSENTIAL FUNCTIONS: • Hands-on ability for combustion tuning and analysis as well as troubleshooting skills to determine and adjust a full range of burners from .5 to 30 MMBTU input, • Factory start-up and commissioning of various C&I thermal equipment including hydronic boilers, high- and low-pressure steam systems including firetube and industrial water tube boilers, steam turbines, heat exchangers, snow melt systems, etc., • Boiler room analyses for possible opportunities to improve reliability and efficiency, • Understanding of all types of hot water and steam (high pressure & low pressure) boiler support equipment to include deaerators, feed systems, blow down systems, economizers and waste heat recovery equipment, • Understanding of wiring diagrams, electrical, controls and instrumentation, • Burner upgrades/conversions, • Advanced Burner control upgrades/conversions, • Implementation of energy efficiency measures, • Technical report writing BENEFITS: • Service vehicle with gas card (once trained and independent), • Cell phone, • Extensive technical training & professional development opportunities, • Medical, dental, vision, life/ad&d, and long-term disability, • 401K, • Vacation and paid sick time, • 10 company holidays, • Compensation commensurate with experience, • Paid travel time - to and from the job site RESPONSIBILITIES/EXPECTATIONS: • Perform scheduled & emergency maintenance/repair of the equipment and all other associated equipment, • Perform installation of the equipment at customer sites as well as conducting pre-installation assistance, • Must be available for "On Call" 24 hour emergency service rotation. Additional compensation is provided when "On Call". Overtime/Double-time compensation paid for work performed outside of normal business hours., • Scheduled night and weekend work is sometimes required to meet customer needs. Advance notice will be provided and will show flexibility/consideration whenever possible., • Must have attitude and aptitude to develop a high level of customer service skills, as well as the ability to respond quickly to service calls with good time management and planning, • Must be motivated and fast paced personality with strong work ethic, • Must work effectively with little or no supervision once trained, • Able to read, write and have good oral communications skills in English, other languages a plus, • Computer ability should be proficient for producing required reports, • Must maintain a valid Driver's License to drive rental vehicles & able to pass a DOT physical for driving fleet vehicles as required, a CDL is not required, • Maintain company provided equipment, tools and or fleet vehicle as per company policy., • Requires completion of company provided confined space & lockout/tagout training in order to work safely as part of a team, • Responsible for the prevention and/or mitigation of any environmental impact associated with job-related tasks, accidents, and emergency situations or conditions, • Actively promotes safe behaviors and health awareness at all times in the execution of daily tasks This opportunity offers a competitive salary (commensurate with experience) 401k, generous health benefits, company paid life/ AD&D, company paid training with future advancement opportunities. Blake Thermal Sales & Service Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. This role requires ability to pass a pre-hire drug test, pre-hire background check and completion of an I-9 form. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.

Job Description Eagle Rock Properties, headquartered in New York, is a full-service real estate firm offering investment management, property management, and construction management services. With a team of over 275 professionals, we specialize in rental apartment communities across the Northeast and Mid-Atlantic regions of the United States. Under the leadership of our executives, who have owned and managed properties for more than 30 years, Eagle Rock Properties has emerged as a pioneering force in the industry. As a Maintenance Technician, under the direction of the Property Manager or the Maintenance Manager, you are responsible for the appearance and working order of individual apartments, exterior, and common areas. Responsibilities: In addition to your technical experience with Maintenance, electrical, HVAC, and mechanical systems and their maintenance and repair, you shall have proven customer service and leadership skills by: • Showing care and concern for our residents through timely follow-ups and meticulous completion of their apartment service tickets, • Resolving maintenance issues in the area of HVAC, electrical, plumbing, and appliance repair, • Managing the make-ready and apartment turnover process with attention to detail and timeliness so apartments can be leased and new residents can move in, • Preserving the value of the building by consistently executing on preventative maintenance programs, • Preserving the beauty of the building and the safety of the community through general upkeep and cleanliness, snow removal and grounds maintenance, • Sustaining peak efficiency operation levels for all property components, • Adhering to applicable building, county, and safety codes/standards, while running an accident-free operation, • Working weekends and participating in the emergency on-call rotation Qualifications: • 3-5+ years of experience in the trades, facilities, and/or residential building maintenance, • Strong leadership aptitude and experience preferred, • Knowledge of risk management, OSHA, and MSDS, • Proficiency with HVAC, plumbing, electrical trades, and appliance repair, • Basic carpentry, drywall, and painting skills, • A safety mindset and an eye for detail, • A builder's mentality (know it like you built it!), • Excellent communication skills, both written and verbal, • A sharp professional appearance, • Availability for emergency situations at the property, including an on-call rotation, • The ability to exert 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly, climb stairs, use ladders and work in varying weather conditions Requirements: • Availability to work a flexible schedule, including weekends, • Rotating on-call responsibility for after-hours emergencies, • Valid driver's license and/or access to reliable transportation, • EPA Certification (Type I & II or Universal) recommended Required Education: • High school diploma or equivalent, • Trade school and/or military training or industry designation (CAMT or CAMT II) Eagle Rock provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics

Do you have what it takes to lead a fast-paced operations & construction team? Our Lamar office in Latham, New York, is now hiring a new management team member to help us bring outdoor advertising campaigns to life for brands in Albany, NY, and the surrounding areas. If you’re great at planning schedules and multitasking and enjoy spending some time outside, we have a great opportunity for a self-motivated leader! The purpose of the Operations Manager is to manage and educate the operations crew. The Operations Manager is responsible for maintaining safe structures, equipment, and the shop. The Operations Manager is a first-line manager in the operations department. We’re in search of a safety-oriented, front-line Operations Manager who can motivate our Operations team through positive leadership and hands-on training. The purpose of the Operations Manager is to manage and educate the operations crew. You are also responsible for maintaining safe structures, equipment, and the shop. Why Lamar? Want a career that takes you above the everyday? As part of Lamar’s billboard construction and operations crew, you’ll experience the city from a bird’s-eye view while building and maintaining the structures that keep communities informed. Join a team that values safety, teamwork, and adventure—every single day. _. Lamar is a certified Great Place to Work, with 88% of employees in agreement. Lamar Advertising has also been named as a “Best Company to Work For” in U.S. News & World Report’s annual ranking. • Learn more about us on our official _., • Check reviews and company updates on our _, • Learn more about our _ What you can expect from us: • A Monday-Friday 6a-2p work schedule, • First-year earning potential of $65,000 - $75,000 / year, including bonus opportunities, • 120 hours of paid time off (PTO) that increases with tenure, • 12 paid company holidays, including Presidents' Day and Juneteenth, • A comprehensive training program, • Career advancement opportunities, • Ongoing professional development and internal leadership programs to maximize your career potential, • Multiple medical plan options and health savings account, • Hospital, Critical Illness, and Accident coverage, • Short & long-term disability and paid parental leave, • Employee Stock Purchase Plan, • 401k plan with company match, • Up to $1,200 value in employer-paid HSA contributions and cash rewards for engaging in our wellness program, • A people-first culture that invests in connection, community involvement, and transparency around employee feedback What we are looking for in YOU: • Working knowledge of personal computers, including Microsoft Office suite to prepare business correspondence and prepare spreadsheets, • Skill in setting priorities which accurately reflect the importance of job responsibilities., • Skill in establishing rapport, encouraging individuals on a professional basis, and listening perceptively, • Skill in mediating between parties and groups., • Skill in working as a part of a team, collaborating with employees, and maintain good working relationships., • Skill in managing including organizing objectives, delegating responsibility, training, evaluating subordinate effectiveness, and administering necessary discipline., • Detailed knowledge of building and dismantling structures, installing and uninstalling advertisements, electrical upkeep, and vegetation maintenance as it pertains to the billboards., • Detailed knowledge of Lamar, OSHA, DOT, federal and state safety regulations., • Ability to understand and operate within a set budget., • Detailed knowledge of the inventory/market and obstacles of each structure in the market., • Ability to drive safely in a company vehicle. Education and experience: • A high school diploma is required., • A valid driver’s license is required., • Generally falls into this location size, but not limited to: up to 12 million in revenue, • 2 years of Operations experience in the outdoor advertising industry or equivalent experience in a safety-related position is required, • 1 year of supervisory experience preferred, • Must have a recommendation from Area Field Manager, Territory Manager, or Regional Manager, • Preferred certifications, depending on location need: CDL, Crane, Signal, Rigging, or LDD, • A one-year certificate or training from a college or technical school in welding, construction, electrical, or related field is preferred., • An OSHA (Occupational Hazard and Safety Administration) safety certification is preferred., • Other equivalent combination of education & experience Please note: Upon submitting your application, you will be asked to complete an 8-15 minute personality assessment. This assessment compares your professional soft skills to the skills required for success in this role. Please answer honestly; this is not a test! Not completing this assessment could result in disqualification from consideration for this position. Candidates with a disability in need of an accommodation to fulfill our application requirements should email _ A day in the life: • Responsible for managing the safety program. This includes hosting monthly safety meeting, ensuring the crew wears the correct safety clothing and equipment, and performing monthly safety observations., • Responsible for overseeing the maintenance and appearance of the structure and Lamar owned properties. This includes ensuring the advertisements are installed correctly, ensuring the vegetation is maintained, and ensuring the structures are properly maintained and upgraded., • Responsible for managing major construction projects. This includes negotiating with subcontracts/vendors, purchasing materials, interacting with the lessor, etc., • Responsible for overseeing expenses and ensuring the operations department remains within budget. Also responsible for tracking the inventory., • Responsible for planning daily duties and routes for the operations crew, including routing their schedules based on installation and maintenance needs., • On occasion, may be required to install and maintain billboards. Physical Demands and Work Environment: • The primary work environment for this position is the office, shop, and outdoors., • The physical demands for this position include moderate lifting, pushing, reaching, seeing (with a focus on reading, color distinction, acuity, depth perception, and peripheral vision), sitting less than 50% of the time, standing, stooping, talking, turning, walking, and climbing., • Nights spent away from home traveling are less than 10%. Company Overview: Who we are: Founded in 1902, Lamar Advertising Company is one of the largest outdoor advertising companies in the world. With over 360,000 displays across the United States and Canada, Lamar is dedicated to helping both local businesses and national brands reach broad audiences every day. We provide ad space through: • Billboards, • Interstate logos, • Handpainted murals, • Transportation and airports, • The largest network of digital billboards in the United States We live by the Golden Rule, and we operate with honesty and integrity in every aspect of our business. We are open with our employees, transparent with our customers, and loyal to the communities in which we serve. While Lamar is a large company, each office has its own culture and family atmosphere, making employees feel connected both locally and nationally. We are committed to sustainable and environmentally friendly business practices and use a number of innovative strategies to reduce our environmental impact. Please _ to learn more about Lamar's green initiatives. Lamar is an EEO/AA employer including Individuals with Disabilities, Protected Veterans, and any other State or Federally Protected characteristic. Please note: Lamar Advertising does not sponsor or take over sponsorship of a work visa. Only candidates with U.S. work authorization not requiring sponsorship will be considered for employment. SMS and Email Communications: By providing your contact information and submitting this form, you agree to receive email and SMS communications from Lamar Advertising Company regarding job opportunities, hiring events, and career-related updates. Message and data rates may apply. You can opt out at any time by emailing or replying 'STOP' to text messages. Your information will be processed in accordance with our . California Residents - Lamar collects personal information in the ordinary course of considering job applicants. This information may include, for example, name, address, phone number and other contact information, employment history and reference contact information, and any other information provided by an applicant to Lamar. By submitting an application, you consent to the use or sharing of this personal information solely for the purpose of consideration for employment by Lamar. Lamar will not sell this information. #CoreOps Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Premium Velocity Auto PVA / Jiffy Lube is looking for high-energy, reliable, customer-focused team players. If you communicate well, learn fast, and enjoy a fast-paced environment, this is your chance to build a long-term career no experience required! A Driver's License is strongly preferred, but not required. Position: Service Technician As a Service Technician, you help customers feel confident in the safety of their vehicles. Our team members are fully cross-trained to perform maintenance, inspections, and customer service. What You'll Do • Provide honest recommendations based on manufacturer guidelines, • Perform oil changes, fluid refills, and basic maintenance (wipers, lights, brakes, tires), • Complete multi-point inspections and maintain accurate records, • Vacuum/sanitize interiors and clean windshields, • Support additional automotive services (engine, HVAC, electrical, transmission, suspension, etc.), • Follow all safety, OSHA, and Jiffy Lube standards, • Participate in on-site and online training, • Assist with marketing events, inventory, and facility upkeep, • Build customer loyalty through clear communication and quality work, • Perform other assigned duties What You Bring • Commitment to safety, • Ability to work effectively in a team, • Willingness to learn with a growth mindset, • Ability to stand for long periods; lift 50+ lbs.; bend, reach, crawl, climb, • Comfortable in enclosed or semi-outdoor workspaces, • Authorized to work in the U.S. Preferred Qualifications • Any level of automotive experience, • Valid Driver's License (strongly preferred), • State Vehicle Inspector License (a plus), • Customer service or sales experience, • Strong communication and listening skills, • Positive attitude and ability to multitask Full-Time Benefits • Medical, dental, vision, and prescription coverage, • Employer-funded life and AD&D insurance, • Paid Time Off, • 401(k) with company match, • Training bonuses (JLU Modules), • Employee discounts, • Optional benefits: disability, critical illness, hospital indemnity, FSAs, EAP & more Added Perks • Pay increase opportunities within the first 60 days, • Paid training + bonus incentives, • Cross-training in multiple roles, • Strong growth pathways (technical & leadership), • Access to financial and legal advising, • Member discount programs (FT only) Ready to Launch Your Career? Bring your drive we'll supply the tools, training, and growth. Apply today and shift your future into high gear! Equal Opportunity Employer Jiffy Lube - Premium Velocity Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. The Robert E. Morris Company is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the New England states plus northern New Jersey and eastern New York, including the New York metropolitan area and Long Island. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help customers "do more with less." As a CNC Tooling Sales Engineer, you will be responsible for being an important support function in the capital equipment sales process by providing technical information required to improve productivity of machine tool users. Working with various internal departments to provide accountability and follow-up for our customers. • Developing and maintaining customer relationships to ensure all needs are met from pre-sales to project completion by actively reviewing processes and reporting through Salesforce, • Maintaining an in-depth knowledge of the machine tool industry and the product lines represented by our company, • Supporting a broad range of tooling and machine accessory projects within a sales territory and establishing yourself as the central knowledge base for the associated machine accessories, work holding, and tool holding products, • Developing solutions for process optimization and managing related projects from concept to completion, • Participating in continuous education meetings, seminars, and training sessions to stay current with new products, processes and technologies, • Cultivating a sales territory to generate revenue when not supporting capital machine projects, • Being responsive to customers and capital sales account managers in resolving issues promptly and professionally, • Maintaining a high degree of integrity and professionalism that safeguards the trust and confidence of customers, and colleagues., • Engineering Degree (or related field) preferred with 3+ years of applicable experience, • Intermediate to sophisticated knowledge of CNC machine technology and applications with experience in a manufacturing environment, • Proficiency with Microsoft Office Suite and the ability to interpret instructions provided in written, oral, diagram, or schedule form, • Deep-seated desire to win in a competitive marketplace, • Strong organizational and time-management skills, • Ability to excel in a team environment as well as when working independently, • Bring a strategic approach to all of your work and creativity for solving challenges, • Strong interpersonal and presentation skills must be able to effectively present products and information to customers in one-on-one and group settings, • Ability to communicate professionally in oral and written exchanges, • Experience with Salesforce or another CRM is a plus, • Ability to manage occasional long-distance travel, • Possess a valid US driving license and a clean driving record, • A valid US Passport is a plus, • Frequent travel throughout a regional sales territory is required, • Public speaking and/or product presentation experience, • CMTSE Certification, • Project Management experience, • Lean Manufacturing training/experience, • Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • Paid Time Off, starting with 23 paid days off in your first year., • 10 Company Paid Holidays, • 401(k) retirement plan with company contribution, • Tuition reimbursement, • Employee appreciation events and perks, • Employee Assistance Program Mental and Physical Requirements: • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: • Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment., • Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas., • Strong handeye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work., • Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law.

We are looking to add a Supervisor Automation to our growing team, ensuring that automated manufacturing equipment, plant utilities, and packaging equipment are fully operational and reliable in order to support manufacturing operations. As a domain authority on automation equipment and systems you will supervise a team of Automation Technicians and contracted resources that support automation work. This position offers the opportunity to contribute to a fast-growing, science-driven organization making a meaningful difference to patients worldwide. When & where: • Location: Rensselaer, • Work model/flexibility: On-Site, • Working Shift: Tuesday - Saturday 12AM - 8:30AM, • Training Shift: Monday - Friday 8:00AM - 4:30PM approximately 6 weeks Discover your role: • Provide mentoring and development opportunities to Automation Technicians while also providing supervisory support of activities on the plant floor, • Full gowning when entering and working on production floor, • Plan, coordinate, and schedule required maintenance/repairs on automated systems, • Communicate and coordinate automation issue resolution between Automation, Manufacturing and Facilities groups, • Support team in maintaining, diagnosing, troubleshooting and repairing automation equipment and systems, • Support deviation management process, including review of investigation reports, root cause analysis and corrective actions, • You are well versed in automation concepts, possessing strong mechanical and electrical proficiency, • Demonstrate experience in the operation and maintenance of automation equipment/systems and have working knowledge of Allen Bradley and/or Siemens PLCs, HMIs, and computerized systems, • Have leadership/supervisory experience, with the ability to lead and mentor others, • Possess strong critical thinking, communication, and technical troubleshooting skills, • Take initiative and empower others in times of uncertainty, while balancing changing priorities in a dynamic environment, • Possess a basic understanding of data integrity regulations This role requires: • Must have an AS/AT/AAT degree in Engineering or a related field along with 5+ years of relevant experience or an equivalent combination of education and experience, • Experience in a pharmaceutical or biopharmaceutical manufacturing facility is desired, • Gowning and Physical Requirements:, • Full cleanroom attire (examples may include: including laundered undergarments, gown, facemask, hairnet, safety glasses, safety shoes and booties, latex gloves and the use of sanitizing agents during gowning process including IPA) Ability to remove jewelry, makeup and nail adornments when wearing cleanroom attire, • Ability to perform physical requirements for entirety of shift (up to 10 hours) in a clean room environment, • Some physical requirements can include but are not limited to: bending, climbing, crawling, kneeling, reaching, reaching overhead, sitting, squatting, walking, standing, driving, hand manipulation and ability to lift/push/pull up to 50lbs Regeneron is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion or belief (or lack thereof), sex, sexual orientation, gender identity or expression, gender reassignment, marital or civil partnership status, civil status, pregnancy or parental status, age, disability, nationality, citizenship status, ethnic or national origin, membership of the Traveler community, familial status, genetic information, military or veteran status, or any other characteristic protected under applicable law. Where required, we will provide reasonable accommodation to applicants with known disabilities or chronic illnesses during the recruitment process, unless such accommodation would impose undue hardship. The final offer will be determined within the relevant range based on the country of employment, specific role level, and your skills and experience. In some countries, collective bargaining agreements (CBAs) may apply and influence certain elements of pay or benefits. Regeneron offers a competitive and comprehensive total rewards package which may include, depending on country and role: annual bonuses or other incentive plans, equity awards, pension or retirement benefits, 401(k) company match, health and wellness programs, fitness centers, insurance benefits (e.g. medical, dental, vision, life and disability), paid time off, and family support benefits. As part of the recruitment process, certain background checks may be conducted in accordance with the laws of the country where the position is based. The purpose of such checks is to verify certain information prior to the commencement of employment such as identity, right to work and educational qualifications.

Ready to accelerate your automotive career? At Jiffy Lube / Premium Velocity Auto (PVA), your State Motor Vehicle Inspector License unlocks significant growth and earning potential. Job Summary Jiffy Lube LLC. is seeking a Licensed State Motor Vehicle Inspector / Lube Technician to ensure vehicles meet state DMV standards and provide customers with confidence in the safety of their vehicle. This role includes performing inspections, communicating results, and delivering preventative maintenance services. Job Description • Perform multi-point vehicle inspections to ensure compliance with emissions standards and state regulations., • Document inspection results and maintain accurate records., • Communicate pass/fail results, recommend corrective actions, and advise service team on additional needs., • Inspect for wear, damage, faulty components, illegal equipment, and alignment issues., • Evaluate key mechanical systems, accessories, electrical circuits, and air lines., • Perform preventative maintenance (oil changes, fluid top-offs, light/wiper/brake/tire services)., • Maintain a safe, clean, and organized work environment. Requirements • Valid State Vehicle Inspector License., • Valid driver's license., • Ability to perform all physical job duties (standing for long periods, lifting 50+ lbs., bending, reaching, crawling, climbing stairs)., • Comfortable working in enclosed or semi-outdoor environments., • Authorized to work in the U.S. without sponsorship. Qualifications • Strong attention to detail and accurate record keeping., • Basic automotive repair and maintenance knowledge., • Commitment to safety procedures and standards., • Growth-minded with willingness to train., • Able to multitask in a fast-paced environment. Benefits • Employer/employee-funded medical, dental, and vision plans; prescription coverage; telemedicine*, • Employer-funded basic life & AD&D*, • JLU training completion bonuses, • Employee discounts on parts and services, • Optional life, AD&D, accident, disability, critical illness, cancer, and hospital indemnity plans*, • Flexible Spending Accounts (FSA) and Dependent Care FSA*, • Employee assistance program, will preparation, travel assistance*, • Full-time employees Added Perks • Opportunity to increase pay within your first 60 days., • Paid training with bonus incentives., • Cross-training across multiple roles to increase earning potential., • Career paths with unlimited advancement opportunities (Automotive & Management)., • Unique benefits including legal/financial advising, employee discounts, and access to a member-only savings center.*, • Full-time employees Equal Opportunity Employer Jiffy Lube - Premium Velocity Auto provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

New York State Homes and Community Renewal (HCR) is the State's affordable housing agency, with a mission to build, preserve, and protect affordable housing and increase homeownership throughout New York State. This position is with HCR's Housing Trust Fund Corporation (HTFC). This is not a civil service position and does not require a civil service exam. Candidates must meet the minimum qualifications outlined below to be considered. NYS Homes and Community Renewal (HCR) is committed to fostering a culture of diversity, equity, inclusion, and accessibility. Our work would not be possible without the diverse backgrounds, experiences, ideas, and abilities of our employees. HCR is committed to developing a workforce that represents the diverse population of New York State. HCR embraces a diverse and inclusive work environment by encouraging all individuals, including those with disabilities, to apply to open positions at the agency. HCR's Sustainability Unit and deploys several programs in alignment with the States Housing and Sustainability initiatives, which include but are not limited to, The Weatherization Services programs, Clean Energy Initiative, The Climate Friendly Homes Fund, All-Electric Multifamily Program, and Green Affordable Pre-electrification program. These programs total over $160M a year in grants and loans, across multiple contract sources, and deployed through various contracting and deployment mechanisms. Duties and Responsibilities: The Housing Sustainability Project Manager will provide project management, on-sight construction oversight, and technical expertise for various decarbonization and energy efficiency programs within NYS Homes and Community Renewal's Office of Housing Preservation. This position will work closely with the Director of Sustainability Programs to support the HCR Sustainability Unit in successfully aligning the State's Decarbonization goals under the direction of the VP of Sustainability. Responsibilities include, but are not limited to: • Conduct regular on-site verification visits during construction for projects funded through HCR's various decarbonization and energy efficiency programs., • Provide technical expertise and oversight for projects completing third-party commissioning to ensure a smooth transition from construction to operation., • Provide support on an as needed basis post-construction to address any operational issues or performance concerns. This may include coordination with retro commissioning teams/activities., • Provide technical assistance for multifamily and single-family buildings overseen by Statewide Asset Management Unit (AMU)., • Support the technical review and maintenance of HCR's various technical resources, including HCR's Sustainability Guidelines., • Provide technical expertise in the design of future decarbonization and energy efficiency programs (heat pump installation/building envelope performance/weatherization/etc.)., • Coordinate with the Design Unit, Environmental Unit, Asset Management, and other teams within HCR to manage projects., • Review Housing development plans for accuracy and technical compliance with the Sustainability Guidelines as assigned or requested by leadership., • Will be expected to travel to housing development sites on a regular basis. Minimum Qualifications: • Bachelor's degree, or equivalent work experience, and a minimum of three years of experience working in a professional office setting in either building energy consulting/management, commissioning or retro-commissioning, building operations, or engineering design. *, • Education and professional experience in energy consulting/auditing, commissioning/retro-commissioning, Architecture/Engineering, or sustainability consulting preferred., • At least one of the following certifications or professional licenses, or equivalent work experience: Professional Engineer (P.E.) license, Certified Energy Manager (CEM) certification, Building Commissioning Professional (BCxP) certification, or Certified Commissioning Professional (CCP) designation., • Ability to solve problems, including but not limited to reviewing mechanical, electrical, and plumbing (MEP) design against real time operational performance to suggest opportunities for improvement., • Ability to establish effective working relationships, • Excellent oral and written communication skills., • Strong analytical and organizational skills., • Ability to work effectively in and with diverse communities., • Substitutions: four years of specialized experience or associate degree and two years of specialized experience may substitute for bachelor's degree; J.D. or master's degree may substitute for one year of specialized experience; Ph.D. may substitute for two years of specialized experience. This job description is not intended to be all inclusive and the employee will be expected to perform other reasonably related duties as assigned. Essential Skills: • Experience managing, or supervising, multiple construction projects simultaneously., • Experience with high-performance new construction buildings and/or existing building retrofits., • Experience with building commissioning, retro-commissioning, or energy audits., • Technical expertise in different heat pump technologies, including expertise in adequate sizing, installation, commissioning, and effective operation., • Experience with building electrification strategies and technologies, particularly for multifamily and single-family housing., • Experience reviewing and analyzing construction drawings, product specifications, energy model reports, utility bills, and benchmarking reports., • Familiarity with construction sites and on-site verification work, including maintaining site documentation., • Experience or familiarity with New York City and New York State Energy Conservation Code, • An understanding or familiarity with the State's Climate Leadership and Community Protection Act goals, specifically related to Housing., • Familiarity with regulated affordable housing, either with design or implementation, financing, operations management, or development., • Ability to communicate between engineers/designers and building operators and maintenance teams, to support training and educational opportunities. Applicants must include a resume. What We Offer at NYS HCR: • Extensive benefits package including participation in New York State's Health Insurance Program and New York State & Local Employees' Retirement System., • Promotional opportunities for dedicated professionals., • Work-life balance benefits including a 37.5-hour work week, opportunity for compressed scheduling, and paid time off benefits (vacation, sick, personal days, and federal holidays)., • 12 weeks of Paid Parental Leave., • Paid Family Leave., • As a New York State employee, you may qualify to participate in the Federal Public Service Loan Forgiveness Program (PSLF). The PSLF Program forgives the remaining balance on your Direct Loans after you have made 120 qualifying monthly payments under an accepted repayment plan and while working full-time for an eligible employer. About New York State Homes and Community Renewal: Under the leadership of Governor Kathy Hochul and Commissioner RuthAnne Visnauskas, HCR is a vibrant, innovative agency that integrates and leverages New York State's housing resources. We have offices in New York City, Albany, Buffalo, and Syracuse, and employ a diverse workforce of professionals who are hard-working and committed to serving low- and moderate-income families. Our mission is far-reaching, encompassing single and multifamily housing finance, home improvement, rent regulation, housing subsidies, and community development. We partner regularly with a variety of public and private stakeholders. Achieving this mission requires a wide range of skills and backgrounds in public policy, administration, real estate, construction, finance, law, and many other areas of expertise. We seek to provide a workplace environment that is productive, flexible, accountable, ethical, and caring. Our employees are empowered to make a difference where they live and work. We offer competitive pay and a comprehensive benefits package, including paid leave, health, dental, vision, retirement, and family-friendly policies. New York State is an Equal Opportunity Employer (EOE)

Build your future at Curia, where our work has the power to save lives Curia is a global contract development and manufacturing organization (CDMO) with over 30 years of experience partnering with pharmaceutical and biotech companies to provide life-saving treatments to patients. At Curia, we are on a mission to advance our customers' therapies from curiosity to cure and ultimately to improve patients' lives. We proudly offer • Generous benefit options (eligible first day of employment), • Paid training, vacation and holidays (vacation accrual begins on first day of employment), • Career advancement opportunities, • Education reimbursement, • 401K program with matching contributions, • Learning platform, • And more! Position overview The QC Laboratory Remediation Manager is an integral part of the Curia team, contributing to our success by leading the QC lab remediation program. The laboratories test chemical intermediates, raw materials, API's, and stability of those products. The QC Lab Remediation Manager will drive the QC lab improvement initiatives to maintain regulatory compliance & simultaneously implement continuous improvement initiatives. The role requires assessing gaps in existing QC lab systems, identifying simple and compliant solutions and implementing the solutions for routine operations. This role will also lead the QC lab LIMS implementation. Identify key areas of improvement and develop robust CAPA plans To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential job duties • Establish and maintain QC lab remediation and continuous improvement, • Work with QC supervisors and QC Manager to complete regulatory inspection and customer audit commitments in an effective and timely manner, • Trend QC lab performance metrics, identify areas of improvement and implement robust CAPAs, • Play a key role in QC lab inspection readiness plan, • Perform gap assessments for Curia network regulatory inspectional observations for QC and implement CAPAs for the gap areas., • Develop a compliant and practical training and qualification program in the lab, develop training metrics and train the trainers, • Perform periodic walkthroughs, identify any potential themes and drive systemic CAPAs working with the QC supervisors and the QC manager, • Update analytical methods, procedures, and training modules to drive improvements, • Lead QC lab LIMS implementation, will support as a key conduit between site QC operation, IT and Global Quality Systems teams in driving the Master Data development, procedural updates and UATs, • Establish new and improved ways to perform the job by challenging established procedures. Education, experience, certification and licensures Required • Bachelor's Degree in Chemistry or relevant field, • Minimum of 5 years of relevant related work experience plus 2 years in a team leadership role., • Investigations experience including root cause analysis, writing, and CAPA identification, • Good understanding of GMP requirements for QC operations, • Previous experience managing a QC team in a commercial product GMP environment Preferred • Advanced degree in Chemistry or related field., • Investigations experience in a laboratory setting, • Pertinent training/courses, • Experience in a cGMP QC environment Knowledge, skills and abilities • Ability to recognize what needs to be done, take action, and accomplish results, • Strong oral and written communication skills, including effective listening, • Demonstrated ability to effectively utilize team resources, • Expert in cGMP, USP, EP and FDA regulations, • Technical competence including the understanding of theory and interpretation of all lab techniques, • Proficient use of computer software, including Microsoft Office Suite (excel, word) and other required software, • Strong organizational skills with the ability to multi-task, • Prior experience and knowledge in FDA GMPs (21 CFR, 211, 820, and/or 600); ISO 9001 and 13485 Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arms. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Work environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee has the potential of being exposed to fumes or airborne particles and toxic or caustic chemicals (wearing proper Personal Protective Equipment will be required in these situations). The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; outside weather conditions; and risk of electrical shock (always being aware of one's environment and taking proper precautions is required). The noise level in the work environment is usually moderate. Employee will be responsible for generating hazardous waste for treatment, storage and disposal. Affected employee will need to be familiar with the applicable training requirements included in the Resources, Conservation and Recovery Act. Employee will understand waste labeling, secondary containment, chemical compatibility, storage time limits, container size and quantity limits, container integrity when waste is left unattended and improper disposal of hazardous materials. The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all job duties performed by the personnel as classified. Management reserves the right to revise or amend duties at any time. Other Qualifications • Must pass a background check, • Must pass a drug screen, • May be required to pass Occupational Health Screening Pay Range: $106,100-$136,000 Education, experience, location and tenure may be considered along with internal equity when job offers are extended. We do not accept unsolicited assistance from any headhunters or recruitment firms for any of our job openings. All resumes or profiles submitted by search firms to any employee at Curia, in any form without a valid, signed search agreement by an authorized signatory in place for the specific position, approved by Talent Acquisition, will be deemed the sole property of Curia. No fee will be paid in the event the candidate is hired by Curia because of the unsolicited referral. All interested applicants must apply online. Please be aware of scammers. Curia will only send offer letters and requests for sensitive personal information from a curiaglobal.com email address. Curia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Curia is an E-Verify employer.

Want to build a brighter, bolder future and cultivate your career? Join Ecolabs team and help create a world in which we all thrive. Our Institutional team enhances customer success in sectors like hospitality, foodservice, long-term care, commercial, education, and government by focusing on satisfied guests, protected reputations, and efficient operations. Committed to building lasting relationships, we leverage our industry expertise and science-based guidance in cleanliness, food safety, and public health. Through our collaborative partnerships, we empower customers to elevate their service and ensure the highest safety standards. Ecolab is seeking a Territory Sales and Service Representative to join our team in the Albany, NY market. As an industry leader, we're growing and need talented people like you to help us continue to protect the world's most vital resources. You will serve as the face of Ecolab, managing your territory, servicing laundry and dish machines, dispensing equipment and systems, and selling new solutions for our customers to help achieve our mutual goal of a cleaner, safer & healthier environment for all. How Youll Make an Impact: • Leverage tools and technology (including tablet and mobile phone apps) to conduct customer visits and recommend unique programs and solutions to customers, • Communicate our total value to the customer to meet their needs and grow sales within existing customer accounts, • Use your problem-solving skills to conduct preventative and corrective maintenance on laundry and dish machines, dispensing equipment, and systems, • Provide emergency service to existing customers via phone or in person, as needed, • Assist in the installation of equipment and solutions, • Demonstrate safe equipment use, ensuring your customers' operations are fully functional, • Manage equipment, parts, and inventory to control costs Position Details: • This is a field-based position and may require travel to the following locations and surrounding areas:?, • Albany, NY, • Lake Placid, NY, • Plattsburgh, NY During your training program, you will be required to travel to Ecolab Corporate Headquarters in Eagan, Minnesota for 2 of the 12 weeks. The remaining weeks will be in-field training. Ecolab will arrange and pay for your travel and certain travel-related expenses. You are responsible for having the proper documentation to fly such as a Real ID or other acceptable form of identification. After completing an initial training program, you will be managing, servicing, and selling to established customers including restaurants, hotels, schools, long-term care facilities, and more within an assigned territory. In some cases, where a territory is not immediately available, associates will be assigned a supporting role until a territory assignment becomes available. Weekend Rotation: This position requires some weekend and holiday on-call availability. Whats Unique About This Role: • Access to best-in-class resources, tools, and technology, • Independent work environment where you will manage your monthly schedule, • Thrive in a company that values a culture of safety to include top-notch safety training and personal protection equipment, • An award-winning paid training program (including paid travel time) at a state-of-the-art training facility in Eagan, MN. This program utilizes a blended approach incorporating digital learning, classroom training, live demonstrations, and on-the-job training with field professionals to ensure associates are safe, confident, and proficient in their roles., • Receive a company service vehicle and cell phone for business use. We pay for fuel, drive time to customer sites, and time for service maintenance on your vehicle, • Grow your income as you drive growth, • Opportunities for growth and development: carve out a long-term, advanced career path towards service, sales, or management with an opportunity for tuition reimbursement ? Minimum Qualifications: • High School Diploma or equivalent, • 2 years of sales, mechanical service, customer service, food service or hospitality industry-related experience, • Availability to work overnight shifts and provide emergency assistance which may occur at night, on weekends and over holidays, • Position requires a current and valid Drivers License with no restrictions, • No Immigration Sponsorship available for this position Physical Requirements of Position: • Lifting 50 lbs, • Pushing/pulling, • Standing/bending/stooping, • Working in confined spaces, • Distinguishing color (tools may be accommodated), • Availability to work overtime, • Driving a company vehicle as required to perform job duties (pre-employment and ongoing motor vehicle record checks will be performed to determine eligibility to drive a company vehicle) Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: • Associates degree or other advanced training or certifications, • Previous mechanical problem-solving experience (e.g. plumbing, electrical, HVAC and/or mechanical experience) in industries related to food service, laundry, housekeeping, hospitality and/or pool and spa Whats in it For You: • Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more!, • The opportunity to take on some of the worlds most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments., • The ability to make an impact and shape your career with a company that is passionate about growth., • The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best. About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The total Compensation range for this position is $70,500-$105,700 which includes base pay and target incentive based on performance, per plan terms. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. _ to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging At Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

Commissioning Energy Engineer EMC Insights is seeking a Senior Commissioning & Energy Management Engineer to support utility-sponsored energy management and commissioning programs throughout New Jersey. The successful candidate will serve as a senior technical resource responsible for evaluating building and industrial system performance, identifying operational energy-saving opportunities, reviewing commissioning studies, validating energy savings estimates, and supporting customers through the implementation of energy management strategies. This role requires a combination of engineering expertise, building systems knowledge, energy analytics capabilities, and strong communication skills. The ideal candidate has experience performing or reviewing Retro-Commissioning (RCx), Monitoring-Based Commissioning (MBCx), Existing Building Commissioning (EBCx), Virtual Commissioning (VCx), Strategic Energy Management (SEM), or related building optimization services. In this role, you will also be a key technical and field resource, including overseeing engineering staff’s work for our energy efficiency program implementation contracts with utilities to assess the impact of energy efficiency programs, conduct on-site visits at C&I facilities, and work with various stakeholders, including contractors and end-use customers, to review energy savings estimates for large and sometimes complex energy efficiency projects. You will help expand our services to provide a range of measurement and verification (M&V) support to stakeholders. EMC Insights is dedicated to the quality of our work and our client relationships. We offer a casual, friendly working environment, a range of benefits, and competitive salaries. About EMC Insights: EMC Insights is a minority-owned energy efficiency and decarbonization consulting firm specializing in utility-sponsored energy management, commissioning, and energy efficiency program implementation. We help utilities, commercial and industrial customers, and service providers identify, implement, and sustain energy savings through data-driven energy management strategies, building optimization, and continuous improvement practices. If you have a passion for energy efficiency and/or customer service and are looking for a challenge of building something from the ground up, let’s talk! What You’ll Do Commissioning and Energy Management • Lead technical reviews of Retro-Commissioning (RCx), Monitoring-Based Commissioning (MBCx), Virtual Commissioning (VCx), and Strategic Energy Management (SEM) projects., • Conduct site assessments of commercial and industrial facilities to identify operational and energy performance improvement opportunities., • Evaluate HVAC, controls, and process systems to identify operational deficiencies and optimization opportunities., • Analyze Building Automation System (BAS) trend data, interval meter data, submeters, and other operational datasets., • Review and evaluate building sequences of operation and control strategies., • Develop recommendations for operational improvements that improve energy efficiency, occupant comfort, equipment reliability, and system performance., • Support implementation and verification of energy management best practices and continuous improvement initiatives., • Assist customers in developing long-term energy management plans and operational performance goals. Technical Analysis and Engineering • Review engineering calculations associated with commissioning and energy management projects., • Develop and verify energy savings estimates for operational, behavioral, and low-cost energy efficiency improvements., • Perform utility billing, interval data, and performance trend analysis., • Evaluate measurement and verification (M&V) plans and post-installation performance data., • Review technical reports prepared by engineering firms, commissioning providers, and trade allies., • Verify persistence and sustainability of energy savings through ongoing monitoring and analysis., • Develop technical guidance, calculators, templates, and engineering tools to support program delivery. Program Delivery and Client Support • Work directly with building owners, facility managers, energy managers, engineering firms, controls contractors, and service providers., • Serve as a technical advisor to utility clients and program stakeholders., • Mentor and provide technical oversight to junior engineering staff., • Support quality assurance and quality control reviews of technical deliverables., • Participate in program design improvements and development of new commissioning and energy management offerings., • Deliver technical presentations and training sessions to customers and program partners., • Maintain project schedules and manage multiple assignments simultaneously. What You Bring with You/Qualifications: • Bachelor's degree in Mechanical Engineering, Electrical Engineering, Architectural Engineering, Energy Engineering, or a related field., • Minimum of 5 years of professional experience in one or more of the following:, • Retro-Commissioning (RCx), • Monitoring-Based Commissioning (MBCx), • Existing Building Commissioning (EBCx), • Virtual Commissioning (VCx), • Building Optimization, • Building Analytics, • Strategic Energy Management (SEM), • Facility Energy Management, • Energy Engineering Consulting, • Controls System Optimization, • Strong understanding of commercial and industrial building systems., • Experience with HVAC systems, central plants, controls systems, and building operations., • Experience reviewing technical reports and energy savings calculations., • Strong written communication and technical reporting skills., • Ability to manage multiple projects and priorities in a client-facing environment., • Valid driver's license and ability to travel throughout New Jersey. Preferred: • 7+ years of commissioning, energy management, or building optimization experience., • Experience supporting utility-sponsored energy efficiency or energy management programs., • Experience evaluating and troubleshooting:, • Air handling systems, • Chilled water systems, • Hot water systems, • Steam systems, • Variable frequency drives, • Building automation systems, • Industrial process systems, • Experience with energy metering, submetering, and data acquisition systems., • Familiarity with ASHRAE Guideline 0 and Guideline 36 concepts., • Experience supporting SEM initiatives, energy teams, organizational change efforts, and continuous improvement programs., • Experience developing and implementing Measurement and Verification (M&V) plans., • CEM, CMVP, and/or CBCP certification, • Affiliations with ASHRAE, IEEE, and other relevant industry organizations, • Experience/expertise with data analytics in Excel is required, • Advanced expertise with macros, VBA, or other data analytics platforms such as Python or R What You Will Get in Return: • Engaging work environment, • Competitive salary based on qualifications, • Flexible personal time off, 10 holidays, including two flex holidays, • Maternity/Paternity paid leave, • 401(k) Plan, • Medical, vision, and dental insurance, • Life insurance and short-term and long-term disability insurance, • Reimbursement for professional development training or certification Employment with EMC Insights is contingent upon the successful completion of a comprehensive background check and reference check. If applicable to the position, a pre-employment drug screen may also be required. Compensation Range $100,000 - $130,000 (Currency – USD)

Substation Engineering Company (SECo) is a full-service engineering and design firm delivering high-quality solutions to electric utilities nationwide. Our expertise spans substation, switchyard, transmission, and distribution projects, supported by advanced laser scanning, 3D modeling, and digital engineering capabilities. We combine strong engineering fundamentals with efficient, forward-thinking processes to deliver safe, reliable, and constructible solutions for critical utility infrastructure. At SECo, our culture revolves around collaboration, accountability, and continuous improvement, where individuals are empowered to take ownership and make an impact with our ever-evolving power utility clients. Job Description: Mid-level electrical engineering position (working under the direction of a Senior Engineer) focused on the performance of relatively routine activities and tasks related to the design of high voltage substations (15kV to 500kV). Typical duties include (but are not limited to): • Creates protection & control and wiring designs., • Performs calculations such as short circuit, voltage drop, circuit ampacities, etc., • Develops single line and schematic diagrams., • Prepares material specifications., • Monitors budget and schedule for assigned tasks., • Works with designers and drafters to guide the development of drawings. Desired Education, Experience, and Training: • BSEE or MSEE required., • EIT or PE preferred but not required., • 5+ years' experience in the field with a basic knowledge of applicable theories, practices and accepted procedures., • Ability to quickly develop broader knowledge through performing structured functional assignments, such as collecting and analyzing data related to specific tasks., • Computer proficiency as well as strong analytical and problem solving skills., • Experience with AutoCAD preferred., • Accuracy and attention to detail as well as ability to meet deadlines and complete assignments., • Basic written and verbal communication skills in English., • Commitment to customer service and ability to work in a team-oriented environment. Compensation & Benefits: The anticipated base salary for this position is $100,000-150,000, depending on qualifications and relevant experience. Candidates with exceptional, directly relevant expertise may be considered outside the anticipated range, subject to the scope of the role, internal equity, and compensation approval. We offer a comprehensive benefits package, including: • Medical/Dental/Vision Insurance, • Flexible Spending Account (FSA), • Paid Holidays, • Generous PTO (Paid Time Off), • Group Life Insurance/LTD/AD&D, • Voluntary Benefit Plans, • Employee Assistance Program (EAP), • 401(k) Match, • Paid Parental Bonding Leave, • Gym Membership Reimbursement, • FE/PE Support, • Collaborative, Fun and Flexible workplace

SUMMARY RSM will be responsible for sales growth within the Northeast/ East coast territory. Manage independent manufacturer's representatives, authorized distributors and target OEMs within the territory to sell E-T-A’s full line of circuit breakers, relays and power distribution products. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties may be assigned. • Analyze assigned sales territory in light of corporate market strategy, identify strengths and weaknesses, develop territory sales plans to meet forecasts, strategic objectives and development of new business., • Create target accounts, set efficient and effective sales call plans and penetrate OEM accounts to achieve maximum sales potential., • Provide technical training and assistance to customers, prospects, manufacturer representatives and distributors., • Prepare reports to management on demand and maintain record of customer sales activities in the company CRM. Responsible for annual sales forecasting, competitive intelligence, and new business opportunity tracking., • 50% daily travel on the road within assigned territory, including overnights, in support of territory sales plans and strategic objectives SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE Bachelor’s Degree or equivalent experience preferred, 5+ years experience in Sales/Business Development roles within E-T-A’s key vertical markets. SKILLS AND ABILITIES Ability to work independently and self manage daily productivity, while at the same time work well in a team environment. Highly customer focused and posses strong closing and prospecting sales skills. Strong knowledge of E-T-A’s key vertical markets. Excellent verbal and written communication skills. Ability to read, analyze and interpret technical data and understand general business concepts. Ability to prepare detailed business plans and conduct presentations in front of colleagues and customers. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to sit and/or walk; use hands and arms. The employee is occasionally required to stand. The employee must occasionally lift and/or move up to 15 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and risk of electrical shock. The noise level in the work environment is usually moderate.

When an entire city needs to be rendered into a 3D model in-flight, utilities buried deep under soil need to be uncovered, highly complex infrastructure projects need to be implemented and even when crime scene investigation needs to be documented – that’s Leica Geosystems, part of Hexagon. More than 5,000 employees in 33 countries help us develop the latest technologies for Reality Capture, Machine Control, GNSS, Photogrammetry, and other Site Positioning technologies. We currently have an opportunity for a Field Support Representative to support Technical Sales on our Heavy Construction team. As an FSR, you will be an integral part of the sales cycle. Working together with the sales team you will help develop and train dealers to become champions in their territory. Your key focus will be helping our dealer sales channel integrate the applications of our products into the workflows of our end users. This position requires regular travel to support dealers across the US. WHAT YOU GET TO DO: • Act as a technical business consultant and help our partners understand how our products can help them deliver results, • Provide product and application training, both in field and classroom settings, for dealers, sales representatives, and end users for Heavy Construction products, • Participate in the sales investigation process, • Participate in seminars, trade shows, conferences, and exhibitions, • Assist our partners with site positioning equipment both GNSS and land-based solutions, • Assist our partners with machine control in the heavy construction sector, • Participate in beta testing new product and providing feedback to development, • Develop training agenda and materials for training classes, • Provide technical support for existing dealers and internal sales representatives on trouble shooting, best-practices, documentation, and escalation, • Provide input with respect to product performance, product testing, market analysis, competitor activities and product/marketing needs and requirements OUR IDEAL CANDIDATE: • Degree from technical institute or commercial college with an emphasis on construction inspection, Civil Engineering or related field; or two to four years related experience and/or training; or equivalent combination of education and experience in all applications of construction surveying, engineering, and/or related software, • Knowledge of machine control systems used in construction, including systems based on laser, sonic, total station, and GNSS, • Knowledge of surveying equipment, including GNSS and total stations, • Knowledge of CAD-based design programs used to create three-dimensional models, • Strong mechanical aptitude, including knowledge of hydraulic and electrical systems, • Must operate heavy machinery and regularly lift and/or move up to 50 pounds, • Excellent technical, communications and presentation skills required. Must be proficient in the working of Microsoft Office Suite, CRM and E-mail, • Excellent interpersonal and relationship skills, • Likes to learn and is open to continuous feedback., • Strong leadership skills including the ability to effectively partner with cross-functional teams, mobilizing people via excellent communication and clear objectives as well as demonstrating commitment to exceeding customer expectations ** Ability to travel as required – there is a considerable amount of travel (60% or more) required to fulfill this role In addition to competitive compensation and an engaging and collaborative business culture, Leica Geosystems offers a comprehensive package of benefits including Paid Time Off, 401k matching up to 6% of compensation, Medical, Dental, Vision, Healthcare FSA & HSA and no cost Life Insurance. Other insurance options including accident, critical illness, hospital care, accidental D&D and short & long-term disability are available at reduced/negotiated costs. We also offer tuition reimbursement, commuter benefits, pre-paid legal counsel, low-cost identity protection and Employee & Family Assistance Program. We are an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to disability, veteran status, or any other characteristic protected by applicable law. We comply with Section 503 of the Rehabilitation Act and VEVRAA requirements. At Hexagon, we believe that diversity of thought, background, and experience makes us stronger. Our people’s passion, creativity, and dedication drive our success, and we strive to be the place where talented individuals want to grow and do their best work. At Hexagon Geosystems, our energy and engagement are reflected in our commitment to innovation, integrity, and excellence. Here, you will find opportunities to develop professionally, take on new challenges, and be part of a collaborative culture that values both independent thinking and teamwork.

Granite City Electric Supply is the area's premier electrical distributor serving electrical contractors as well as residential, commercial, and industrial customers for over 100 years. With branches covering Massachusetts, New York, Rhode Island, New Hampshire, Vermont, and Connecticut, we are the largest regional independent electrical supply company and the official distributor of electrical supplies to the Boston Red Sox. Granite City is looking for a Night Driver to join our delivery team in Albany, NY! We offer competitive pay as well as incentives. The Granite City Delivery Driver will assist with routing of the trucks, assist drivers, resolve customer issues, loading of trucks, drive to customer locations, unload, and deliver product in a timely, efficient, and safe manner. Candidate will maintain vehicle in good condition and ensure paperwork is current and accurate. He/she will provide superior customer service, delivering product on-time, accurately and professionally. Hours for this position are 6:30 PM to 3:00 AM, Monday through Friday. Compensation for this position is an hourly rate starting at $23.00. Essential Functions: • Deliver material to customers in an efficient and safe manner., • Conduct pre & post trip inspections., • Ensure truck is in safe operating condition, looks clean and professional, and adheres to DOT regulations., • Effectively communicate with internal customers, such as sales associates and ops associate to ensure customer satisfaction., • Effectively communicate with external customers while providing first class delivery service., • Provide feedback to the supervisors to maintain efficiency in driving routes., • Acquires and maintains current knowledge of GCE policies and procedures, participates in training, and attends meetings as requested., • Must always be professional and have a professional appearance., • Participate in processes and programs aimed at promoting a safe work environment., • Follow all SOP's for the position, maintain high order accuracy and on-time delivery., • Performs other duties as assigned. Education and/or Experience: • High School Diploma or equivalent., • Must have 1-3 years professional driving experience., • Knowledge of and experience with forklift operations and warehouse equipment preferred., • Eclipse software experience preferred; computer aptitude is necessary., • Equivalent education or experience may be substituted for any of the above., • Valid driver's license, clean driving record, Medical DOT Card., • Experience with routing software preferred. Position Requirements: • Customer service essential, electrical or construction knowledge is a plus., • Must have valid License., • Must have valid, unexpired, Medical DOT Card., • Must be able to drive professionally, must hold valid, unexpired drivers license., • Must have a clean driving record/MVR., • Must be able to communicate effectively with internal and external customers., • Good math and reading skills., • Must have mechanical aptitude., • Must be able to understand maps/GPS., • Ability to lift up to 70lbs on a repetitive and ongoing basis., • Ability to walk/stand/sit., • Ability to push/pull up to 70lbs repetitively., • Must be able to bend, twist and stoop frequently., • Must be able to climb in and out of truck routinely., • Must be able to work in all weather conditions. Compensation: • Excellent employee benefits including, medical, dental, vision, life, STD/LTD, 401k, vacation, holiday, sick time and more! Join our team and work among the best in the industry! We are an equal opportunity employer. Disabled/Veteran. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. The employer uses E-Verify.

Product Lifecycle Management Implementation Specialist Company Description We are hiring for tomorrow! Are you seeking an opportunity to work for an innovative company with their eyes on the future? A leader in its field? A company who strives to build longstanding relationships with its employees and clients. Then look no further than IMAGINiT and come grow with us. IMAGINiT Technologies, a division of Rand Worldwide, advances the way architects and engineers use 3D technology to design, develop, and manage complex engineering projects. As an Autodesk Platinum Partner and the largest Authorized Training Center (ATC) Partner in North America, IMAGINiT is a leading provider of Autodesk design and engineering solutions to the building, infrastructure and manufacturing industries. Job Description Product Lifecycle Management (PLM) Implementation Specialists work with many different leading-edge firms to help them implement PLM technology to streamline processes and materially impact business success. In this role they support customer engagements throughout an implementation, including: the initial discovery phase, requirements gathering, configuration, training, issue resolution, upgrades, support handoff and overall project management. A PLM Implementation Specialist functions as a trusted advisor to the customer by proposing process optimization solutions based on their strong industry knowledge, in-depth product knowledge and business acumen. Individuals in this position also play a key role in developing IMAGINiT’s capabilities to deliver a first-class PLM solution through participation in pre-sales, marketing, and offering development activities. Key Responsibilities • Assists in the creation of customers “as is” process maps documenting all the current company processes, terminology, tools in use, responsible parties, and other pertinent information., • Participate in workshops to collect client data and document configuration needs for the project: client roles, job responsibilities, processes., • Documents necessary field information (drop down, free form, type info needed, field restrictions)., • Partners with Sales to develop PLM business opportunities and participate in marketing events and other related activities to generate business opportunities., • Identifies, assesses, and manages resolution of issues, • Executes PLM system implementation delivery tasks (configuration, scripting, rollout, testing, etc.) Qualifications • Bachelor’s degree in computer science, Electrical, Industrial, Mechanical, or related engineering field., • 3-5 years’ work experience in delivering PLM and related solutions, • Experience with Autodesk Fusion Manage, • Ability to apply analysis and creative thinking when solving problems., • Experience with identifying and implementing process improvements., • Strong data management and analytical skills, • Familiar with ERP applications., • Familiar with Software Lifecycle Management (SDLC), Change Management, and agile methodology., • Experience with supply chain management (SCM) and product life cycle management (PLM)., • Familiar with Information Technology standards and best practices., • Strong time management skills with and ability to multitask, handle changing priorities and meet deadlines, • Able to communicate effectively with both business partners and IT professionals., • Strong business acumen, high energy, self-motivated and able to work under pressure., • Ability to meet 25% travel requirement. Total Compensation • Base Range: $115,000-$130,000 PLUS Bonus Benefits • Health, Dental, and Vision, • Health Savings Account with Employer Matching Contribution, • Limited Purpose FSA Account, • Medical Flexible Spending Account, • Dependent Care Assistance Plan, • Short & Long-Term Disability, • Wellness Programs, • Employee Assistance Program, • Group Term Life Insurance, • Voluntary Life Insurance, • Paid Holidays, • Vacation and Sick Leave, • 401(k) with company match, • Tuition Reimbursement, • Service Awards, • Employee Referral Bonus Program Visit us at http://www.rand.com for more information. We celebrate employment equity and diversity! We encourage applications from all qualified individuals and do not discriminate based on disability, race, ethnicity, religion, gender, sexual orientation, age, veteran status, or any other basis protected under federal, state, provincial or local laws. We are committed to providing reasonable accommodations for persons with disabilities. If you require reasonable accommodation during the application process, we will work with you to meet your needs.We thank all applicants in advance for their interest, but only those applicants who are to be considered will be contacted. Must be authorized to work in the U.S. for any employer without company sponsorship.

Datacenter People are currently supporting a global specialist in liquid leak detection solutions, in the search for a Field Engineer to support customers across the United States. This is an excellent opportunity for a mechanical engineer looking to develop hands-on technical experience within mission-critical environments. The role offers extensive training, exposure to customer-facing engineering work, and the opportunity to travel across the US supporting the installation, commissioning and maintenance of specialist technology used to protect critical infrastructure. The Opportunity You will work with industry-leading liquid leak detection systems deployed within data centers, commercial buildings, industrial facilities and other critical environments. Working alongside experienced engineers, you will gain practical experience across installation, commissioning, troubleshooting and customer support activities, building a strong foundation for a long-term engineering career. What the Job Involves… • Supporting the installation and commissioning of leak detection systems, • Assisting with testing, troubleshooting and fault-finding activities, • Providing on-site technical support to customers, • Supporting project delivery from installation through to handover, • Producing technical documentation and project reports, • Working closely with senior engineers and project teams, • Developing product and application knowledge through training and field experience, • Building strong relationships with customers and project stakeholders This is a field-based position requiring regular travel and overnight stays throughout the working week. Candidates should be comfortable travelling Monday-Friday and working on customer sites across the US. We're Looking for Someone Who... • Recently graduated, or within the first few years of their engineering career, • Degree qualified in Mechanical Engineering, Electrical Engineering, HVAC, Building Services Engineering or a related discipline, • Some experience installing and commissioning electromechanical equipment, • Strong technical curiosity and willingness to learn, • Good interpersonal skills due to customer-facing nature of the role, • Excellent problem-solving and communication skills, • Ability to work independently and as part of a wider team, • Comfortable with regular travel and working away from home during the week Previous internship, placement year, vocational trade, commissioning, maintenance or field engineering experience would be beneficial but is not essential. What Makes This Role Interesting... • Excellent entry point into the mission-critical infrastructure and data center industry, • Comprehensive training and mentorship from experienced engineers, • Opportunity to work with specialist technologies deployed in critical facilities worldwide, • Extensive hands-on field experience early in your career, • Exposure to customers, projects and technologies across multiple industries We regret that due to the high volume of applications we are unable to acknowledge each one. Please bear in mind that if you are selected for interview we will contact you within the next seven days.

Job Title: Wind Turbine Technician Location: United States Project Type: Onshore Wind Employment Type: Contract and Long-Term Assignments Workplace Type: On-site Role Overview Select Offshore is recruiting Wind Turbine Technicians to support utility-scale onshore wind farm projects across the United States. This is a hands-on field role suited to technicians with experience in wind turbine installation, commissioning, service, and maintenance on modern multi-MW turbine platforms. Opportunities are available for both project-based and longer-term assignments depending on experience and location. Key Responsibilities • Perform wind turbine installation, commissioning, service, and maintenance activities, • Execute mechanical, electrical, and hydraulic tasks in line with OEM procedures, • Conduct troubleshooting, inspections, and fault finding on wind turbine systems, • Follow all site safety requirements including lock-out tag-out and permit systems, • Complete daily work reports and maintenance documentation, • Work effectively as part of a site-based technical team Required Experience and Qualifications • Previous experience working as a wind turbine technician on utility-scale projects, • Mechanical, electrical, or electro-mechanical background, • Ability to read and understand electrical, mechanical, and hydraulic diagrams, • Valid GWO certifications including BST and BTT or equivalent US safety training, • Comfortable working at heights and in all weather conditions, • Willingness to travel or work rotationally across the United States Preferred Experience • Installation, commissioning, or service experience on modern onshore turbines, • Experience with major component exchange support or heavy maintenance, • Familiarity with OEM procedures and quality standards What’s on Offer • Opportunities on major onshore wind projects across the USA, • Competitive hourly or day rates, • Long-term project potential depending on performance and demand, • Full support with mobilisation, compliance, and site onboarding via Select Offshore

Growing Groves is partnering with a well-known leader in heat treat equipment manufacturing to find a Field Service Engineer for their team. This is a role for a technical professional who thrives on a consistently varied environment and set of challenges. Company and Position Summary Our client is a leader in the heat treat industry, known for offering challenging career opportunities and deep professional training. They are seeking a Field Sales Technician/Engineer to join cross-functional teams to support aftermarket and new installs of heat treat equipment. You'll also be a critical liaison between the customer and the internal engineering teams, ensuring that the customer's technical needs are met with the best possible solution. Location: Remote with smooth airport access Territory: North America Reports to: Engineering Manager Key Responsibilities • Consistent travel to customer sites (average 3 days for service, longer for installs), • Service and support of the atmospheric and vacuum heat treat equipment lines, • New machine install, set up, and first run, • Coordinate with internal engineering teams with complex support/install needs, • Coordinate layout with customer for new installs, • Provide operation demonstration to customers, • When not traveling, use home office to support remote customer issues, revise internal documentation, etc. Position Requirements • 5+ years of proven industrial field service experience on heavy capital equipment, • Deep mechanical experience w/ interest or experience in learning electrical, • Strong aptitude to succeed in a technical and relationship-driven business., • Willingness to regularly travel to customer sites, • Self-directed and organized with the ability to work independently., • Strong oral and written communication skills Position Preferences • Related engineering degree, • Experience with heat treat equipment (or thermal processing, industrial HVAC, etc.), • Experience with PLCs Employee Compensation and Benefits • Professional Development: Opportunities for professional training and career growth within a global organization., • Hourly rate based on 40/hour week minimum with consistent opportunities for OT (1.5x after 8-hour weekday, 1.5X Saturday, 1.5X Sunday), • Experience Based Compensation: Up to $55/hour, • Work Environment: A challenging and dynamic environment that values leadership, teamwork, integrity, and accountability. We believe in a diverse and inclusive workplace. Growing Groves and our client are proud to be equal opportunity employers, and we encourage all qualified individuals to apply.

Job Description Lia Hyundai Albany is seeking an Level B & C Automotive Technician to join our team. If you're an experienced technician looking for a fast-paced, professional, and positive environment that rewards hard-working, reliable, and team-oriented individuals, this is the right place for you! Lia service departments are equipped with the latest technologies & equipment including service drive alignment checker, alignment rack, and Hunter tire mounting and balancing machines. Sign on bonus may be available based on skill level and experience. COMPENSATION RANGE: $45K-$60K SIGN ON BONUS: N/A REQUIREMENTS: • 3+ years of Service Technician experience required, • Any Hyundai training or certification preferred, • Diagnostic, Electrical, and Engine Repair experience required, • State Inspection certification required, • ASE Certification recommended, • Able to operate electronic diagnostic equipment, • Ability to learn new technology, repair, and service procedures and specifications, • Computer skills, • Ability to work in a fast-paced environment, • Must have clean & valid driver's license KEY RESPONSIBILITIES: • Perform work specified on the repair order with efficiency and in accordance with dealership processes, • Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, providing an estimate of the time needed for additional repairs., • Executing repairs under warranty to manufacturer specifications BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Lia Hyundai Albany is seeking a Level A/A+ level Automotive Technician to join our team. If you're an experienced technician looking for a fast-paced, professional, and positive environment that rewards hard-working, reliable, and team-oriented individuals, this is the right place for you! Lia service departments are equipped with the latest technologies & equipment including service drive alignment checker, alignment rack, and Hunter tire mounting and balancing machines. Sign on bonus may be available based on skill level and experience. COMPENSATION RANGE: $60K-$100K+ SIGN ON BONUS: Available up to $5000 if Hyundai Platinum Certified REQUIREMENTS: • 3+ years of Service Technician experience required, • Diagnostic, Electrical, and Engine Repair experience required, • State Inspection certification required, • Any Hyundai training or certifications preferred, • ASE Certification recommended, • Able to operate electronic diagnostic equipment, • Ability to learn new technology, repair, and service procedures and specifications, • Computer skills, • Ability to work in a fast-paced environment, • Must have clean & valid driver's license KEY RESPONSIBILITIES: • Perform work specified on the repair order with efficiency and in accordance with dealership processes, • Test-drive vehicles, and test components and systems using diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc., • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed, providing an estimate of the time needed for additional repairs., • Executing repairs under warranty to manufacturer specifications BENEFITS: • Medical, Dental and Vision, • 401K Plan with Employer Match, • ASE and state inspection certification reimbursement and all training expenses paid to further your career, • Continued education, manufacturer hands-on and web-based training, • Paid Time Off, • Paid Weekly, • An employer funded Life Insurance Plan, • Discounts on services and parts, • Employee vehicle purchase plans, • Company provided uniforms ABOUT US: The Lia Auto Group is one of the top 100 automotive groups in the country, established in 1977 by Bill Lia Sr. The group consists of 21 dealerships throughout New York, Connecticut, and Massachusetts, offering a variety of manufacturers including Honda, Toyota, Hyundai, Nissan, Infiniti, Volkswagen, and Chrysler Jeep Dodge Ram (CJDR). Lia also provides rental and full-body repair services at the Lia Collision Center in Colonie, NY. The Lia Group Companies has since grown to include Vent Fitness, Lia Insurance Agency, BurgerFi, and various commercial properties including Hamilton Square shopping center in Guilderland, NY. Our team of over 1,500 dedicated staff members have delivered quality products and exceptional consumer experiences for over 40 years. With a long history of success and continuous expansion, the Lia Auto Group provides ample opportunity for development and growth to current and future employees. We offer competitive wages, generous benefits, and a rewarding, safety-conscious work environment. We seek those who can help us take our growth and service to the next level. COMMUNITY: We are heavily involved in supporting the communities we live in and work in and look for people to join us in volunteerism and fundraising efforts for many local charities and non-profit organizations.

Job Description Overview Diesel & Automotive Technician/Mechanic – Menands, NY. $40.00 - $50.00 hr | Weekly Pay | Full Benefits within 30 Days | Potential Bonus Available up to $5,000.00! Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Diesel & Automotive Technician/Mechanic to join our team in Menands, NY. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $40.00 – $50.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Tuesday - Friday: 2:00pm - 10:30pm | Saturday: 8am - 4:30pm Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on light to medium duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing diesel and automotive vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #AutomotiveMechanic #NowHiring #AutomotiveTechnicianCareer #MechanicJobs #AutoTechnician INDBS