Electrical training jobs in Wayne, New JerseyCreate job alerts

Overview: The Sr. Project Engineer role will oversee and execute the project controls and management of a multiple discipline, EPC project. Your main functions will include (but not limited to) responsibility for the full scope of the project such as direct support to a Sr. Project Engineer II installed quantity monitoring, contract administration, project planning and scheduling, procurement, and project reporting. The Sr. Project Engineer I role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, equipment vendors, and the ongoing strategic communication with project management regarding the status of the project. Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 90% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. A company vehicle and fuel card OR vehicle allowance will be provided. COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Represent in a professional manner in all client interaction activities., • Provide the client with contract required reports (weekly, monthly, schedule.), • Champion Corporate Safety Plan and help develop the site-specific safety plan., • Create quantity calculation formulas to accurately determine percentage of completed/installed materials., • Develop a process for the creation and review of work plans and work packages., • Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over., • Manage the compilation, processing, and customer approval of daily labor timesheets., • Review and train people the correct usage of Job Safety Analysis (JSA’s), • Lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training., • Track material deliveries and develop procurement status report., • Plan, schedule, and coordinate work groups on the jobsite., • Direct other to perform material takeoffs from drawings, specifications, and other contract documents., • Perform complex engineering calculations and technical drafting to support field operations., • Direct Field Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use., • Review field issued purchase orders and subcontracts, prepare material buyout take offs from issued for construction drawings., • Direct home office performed procurement and subcontract administration functions., • Provide field support and supervise subcontractor operations., • Manage all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence., • Create and closely monitor project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc., • Create and maintain master project schedule., • Generate change orders and as-built data to be reviewed by the Project Manager., • Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves., • Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities., • Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes., • Alert Project Manager and Home Office of trends regarding labor, material, subcontractor and equipment costs., • Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment.), • Identify trends and suggest corrective actions when needed., • Establish the cashflow forecast and curve to ensure positive cashflow for the project., • Act as primary company representative in the absence of or as directed by Project Manager., • Know all of the provisions, terms and scope of the Prime contract., • Develop and prepare Schedule of Values and all Invoices to customer., • Manage, lead direct reports, and mentor. SUPERVISORY: • Support a crew of 100 people for short periods if needed., • Lead/Direct a team of 1 or more Field Engineers., • Bachelor’s degree in engineering, construction management, or related., • 7 plus years’ experience as a Field Engineer or similar role. KNOWLEDGE, SKILLS, AND ABILITIES REQUIRED: • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents., • Provide constructability and cost saving alternatives at design phase of project., • Ability to freely access all points of a construction site in wide-ranging climates and environment., • Highly motivated, with a demonstrated passion for excellence and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time., • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Leader with the ability to delegate work and provide support as needed to meet deadlines, goals, and objectives., • Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.), • Other may duties may be assigned, • Maintain in-depth relations with all members of their team and your supervisor. PHYSICAL DEMANDS: • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.) Financial Wellbeing • Compensation $130,000 - $180,000 per year, commensurate with experience., • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appred

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $25.00/Hr.

Overview: Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PM Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: This position is for the Overnight Shift 2am - 1030am Monday to Friday Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level A Fleet Mechanic/Technician is the top-tier technical expert in the shop, responsible for advanced diagnostics, complex repairs, and technical leadership across refuse trucks, heavy trucks/tractors, and support assets. This role sets the standard for safety, quality, productivity, and training, and partners with maintenance leadership to drive up time and regulatory compliance across the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Complex Repairs • Lead diagnosis and resolution of complex, intermittent, or chronic issues involving:, • Engine performance and emissions/aftertreatment (DPF, DOC, SCR, sensors, dosing systems)., • CAN-bus and multiplex electrical systems, electronic control modules, and communication networks., • Advanced hydraulics for refuse bodies, auto-load arms, high-pressure systems, and heavy truck power take-offs., • Plan and execute major component work including major engine reparis, transmission and differential R&R, frame-off repairs, and complex hydraulic rebuilds. Technical Leadership & Training • Serve as the go-to technical resource for Level B and Level C technicians; provide on-the-job training, coaching, and quality checks., • Assist in training on:, • Diagnostic software and tools., • New equipment technology, safety systems, and telematics., • Company maintenance standards, PM strategies, and repair procedures. Fleet Reliability, Compliance & Continuous Improvement • Analyze repeat repairs, failure trends, and PM findings; recommend changes to PM intervals, inspection checklists, or parts specifications., • Ensure all work complies with DOT, FMCSA, OSHA, BIC, DEP and environmental regulations, as well as state/local requirements in NY, NYC, NJ, and CT., • Perform and sign off on the most critical inspections (e.g., PDI, PM and Annual inspections, accident damage assessments, major repair QC). Operational & Customer Support • Support complex road calls and on-site repairs on the road, at transfer stations, MRFs, or customer locations throughout the NYC tri-state area., • Partner with Operations and Dispatch to minimize downtime, sequence repairs effectively, and prioritize critical units i.e. NYC dense-route refuse units, specialized collection assets., • Provide clear feedback to leadership on equipment condition, replacement candidates, and chronic issues affecting uptime or safety. Administrative & Leadership Duties (as assigned) • Help plan daily shop workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating vendor options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the shop. Requirements and Qualifications::, • High school diploma or GED required; additional technical training strongly preferred., • A minimum of 5 years of proven hands-on experience as a diesel mechanic as a diesel/heavy-equipment mechanic/technician, including advanced diagnostics and major component overhaul., • CDL Class B or A with air brake endorsement required or strongly preferred due to frequent road tests and movement of collection vehicles on public roads., • Demonstrated expert-level knowledge of:, • Heavy truck and refuse systems., • Refuse hydraulic, electrical, and powertrain systems., • Diagnostic software, scan tools, and OEM service information., • Proven track record of performing complex diagnostics and repairs independently., • Must provide own professional-grade tools required for diagnostic and repair work., • ASE Master Medium/Heavy Truck Technician or equivalent combination of ASE certifications (T series) and/or OEM advanced certifications preferred., • Possession of a valid driver’s license is required., • Experience in a lead or senior technician role in a refuse, municipal, or large private fleet environment preferred., • Experience with CNG/LNG, hybrid, or EV drivetrains for heavy vehicles preferred., • Strong communication skills and the ability to coach, influence, and drive standards across multiple shifts or locations preferred. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $31.47/Hr. Salary Range Maximum: USD $31.47/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required., • Competitive wage (based on experience) plus Time and a half for Overtime., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k). We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Sysco is Now Hiring Diesel Fleet Techs Lvl. III in Northampton, PA! \nEarn $28.17 - $42.21 per Hour* Plus a $600 Annual Tool Allowance \nComprehensive Benefits Package \n\n We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and serve others in a manner that exceeds their expectations. We’re looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. \n\n Benefits: \n\n\n\t • Earn $28.17 - $42.21 per hour*\n\t, • $600 annual tool allowance\n\t, • Annual boot allowance\n\t, • Paid vacation and holidays\n\t, • Ongoing job skills and leadership development training\n\t, • Career growth opportunities – we promote from within!\n\t, • Comprehensive healthcare benefits\n\t, • Perform required inspections and preventive maintenance on vehicles and equipment with in planned time tolerances to maximize the safety, reliability, and cost efficiency throughout the life cycle of the fleet\n\t, • Perform FAI/CVI (annual) inspections on all fleet vehicles including tractors, trailers, converter dollies, light-duty vehicles, and any other company-owned equipment in accordance with all federal, state and local legal and regulatory agencies (includes all state-required inspections and frequencies)\n\t, • Perform quality preventive maintenance inspections per company methods on all fleet vehicles including tractors, trailers, converter dollies, refrigeration units (reefer), lift-gates, light-duty vehicles, and any other company-owned equipment\n\t, • Perform quality maintenance repairs as required to maximize safety and reliability on all fleet vehicles including tractors, trailers, converter dollies, lift-gates, light-duty vehicles, and any company-owned equipment\n\t, • Perform preventive maintenance, diagnosis and repair to refrigeration units (reefer)\n\t, • Address all Driver Vehicle Inspection Report write ups timely, and efficiently\n\t, • Diagnose cause of any malfunction and perform repairs to manufacturer specifications including but not limited to engines, transmissions and clutches, drive-line, differential, steering and suspension, fuel and ignition system, exhaust systems (including regeneration systems), intake systems, electrical systems, brake systems, HVAC systems and lift-gate hydraulic, mechanical and electrical systems\n\t, • Follow procedures including documenting all work performed on work orders\n\t, • Mentor, teach and share expertise with Fleet Technician I and II to aid in their development to positions of greater responsibility\n\t, • May perform moderate supervisory roles when Fleet Manager or Fleet Supervisors are not accessible\n\t, • Proficient in electrical meter testing\n\t, • Knowledge of controls and electrical systems (DC, low-voltage)\n\t, • Electric motor knowledge (DC)\n\t, • Education\n\t\n\t\t, • High school diploma or GED\n\t\t, • Current and valid driver's license (CDL preferred, not required)\n\t\n\t\n\t, • Experience\n\t\n\t\t, • Medium / Heavy Duty truck technical training\n\t\t, • 2-year school and 4 years of experience OR 5 years of experience in fleet maintenance and repair\n\t\n\t\n\t, • Certifications, Licenses, and Registrations\n\t\n\t\t, • Annual Inspector Certification knowledge, skills, and abilities\n\t\t, • Brake Inspector Certification knowledge, skills, and abilities\n\t\t, • ASE certifications; automotive or medium/heavy duty trucks\n\t\t

NJ & NYC Metro Field Sales Role must live in Territory! Advance your career with the Johnson Controls team! As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a diverse and inclusive team that empowers you to build your best future! Our teams are strategically positioned to support a multitude of industries across the globe. You will have the opportunity to grow and develop through meaningful work projects and learning opportunities. We are committed to fostering an environment that supports the physical, financial, and emotional wellbeing of all employees. Become a valued member of the Johnson Controls family and thrive in a company culture that values your unique voice and ideas – your next great opportunity is just a few clicks away! We recognize that a fulfilling career is supported by your overall wellbeing. That's why we offer a comprehensive benefits package designed to support you in multiple aspects of life, including: * Competitive salary * Generous paid vacation, holidays, and sick time - 15 days of vacation in your first year to promote work-life balance * Comprehensive benefits package, including 401K, medical, dental, and vision care, available from day one * An encouraging and collaborative team environment that values diverse perspectives and fosters innovation * On-the-job and cross-training opportunities * A strong commitment to safety through our Zero Harm policy, ensuring a safe and secure workplace for all employees * JCI Employee discount programs (The Loop by Perk Spot) * Check us Out: ___ Become part of a culture that celebrates your achievements and encourages your voice and ideas. Your next great opportunity for advancement is right at your fingertips! Take the initiative to explore your potential and embark on an exciting career journey with Johnson Controls. Join Johnson Controls as a Sales Leader in Enterprise Security and Fire Solutions, where you’ll play a pivotal role in shaping the future of smart, secure buildings. You’ll be responsible for selling our complex security and fire protection technologies to general contractors, electrical contractors, and consulting engineers—delivering tailored solutions that protect people, property, and operations. Your expertise in enterprise-level security systems—including CCTV, card access, and integrated platforms—will be central to your success. In addition, your working knowledge of fire protection systems such as Edwards EST, Honeywell, or Simplex will allow you to offer comprehensive solutions that meet the full spectrum of customer needs. This is your opportunity to join a global leader in building technology, where innovation meets purpose and your work makes a real impact. * Lead with confidence: Sell Johnson Controls’ security and fire offerings to contractors, consultants, and designers, positioning our solutions as essential to modern building design. * Drive opportunity: Identify and pursue high-value engagements, managing multiple opportunities and delivering results that align with customer goals. * Build trust: Develop strong relationships with key decision-makers, listening actively and offering solutions that deliver measurable value. * Champion service: Promote renewable service agreements as a foundation for long-term customer success and satisfaction. * Be the expert: Apply your technical and business knowledge to match solutions to customer needs, positioning Johnson Controls as their preferred partner. * Advocate for excellence: Ensure customers receive maximum value from our offerings, from initial engagement through final delivery and training. Required * Bachelor’s degree in business, engineering, or a related field—or equivalent experience. * 1–3 years of experience selling enterprise-level security and fire solutions. * Familiarity with fire protection systems such as Edwards EST, Honeywell, or Simplex. * Strong initiative, integrity, and interpersonal communication skills. * Proven ability to influence key stakeholders and drive strategic outcomes. * Experience with CRM platforms such as Salesforce. Salary Range: HIRING SALARY RANGE: $79,000-123,000 (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This role also offers a competitive Sales Incentive Plan that will take into account volume and margin on a project, quarterly, and annual basis. This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ___ #LI-MM1 #SalesHiring #LI-Hybrid

$32 - $36 per hour // 1st shift (6:00 am - 3:00 pm) // 22 days of PTO // Medical, Dental, Vision, and 401K This Jobot Job is hosted by: Braden Prater Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $32 - $36 per hour A bit about us: Our Client is a growing Food Packaging Manufacturer in Great San Antonio Texas. Why join us? 1st shift (6:00 am – 3:00pm). Scheduled 9-hour shifts. Rotating weekend shifts (8-hour shifts). Average 8–12 hours OT per week. Plenty more if desired. Compensation & Benefits Pay: $32–$36/hr. Benefits: Medical, dental, vision, 401K. 22 days PTO (with floating holidays, accrual-based). 8 recognized holidays. Job Details Job Description SUMMARY The Maintenance Technician II is responsible for performing skilled maintenance and repair work on complex mechanical, electrical, HVAC, and facility systems. This includes troubleshooting and repairing equipment in compliance with standard operating procedures, safety policies, manufacturer specifications, and company requirements. The role also manages spare parts inventory, recommends tools and supply purchases, and supports efficiency improvements within the facility. Additionally, this position provides guidance and oversight for less experienced technicians. ACCOUNTABILITIES Identify, troubleshoot, and resolve mechanical or electrical safety issues. Evaluate equipment and facility needs, recommend solutions, and implement corrective actions to reduce downtime and improve overall efficiency. Maintain purchasing and inventory controls for spare parts, tools, and supplies. Support installations, equipment startups, and ongoing facility projects. Assist with daily and weekly operational support for assets and equipment. Participate in training warehouse and operations personnel as needed. Contribute to special projects and continuous improvement initiatives directed by management. Plan and carry out corrective, preventive, and predictive maintenance activities. EXPERIENCE 3–5 years of experience in industrial or facility maintenance, including work with high-volume conveying systems. 3+ years of experience with PLCs and advanced electrical troubleshooting/repair. Hands-on experience with motors, electrical controls, water systems, large washers, and high-volume operations. Background in welding, pipe installation/repair, and boiler/heating systems. Prior experience performing general facility maintenance such as doors, forklifts, and office infrastructure. SKILLS Strong mechanical and electrical troubleshooting skills. Proficiency with PLC programming and repair. Ability to support and maintain high-volume material handling and conveying systems. Experience with fabrication and facility repair work (welding, piping, heating/boiler systems). Familiarity with maintenance best practices, including preventive and predictive maintenance methods. Ability to mentor and support junior technicians while working in a fast-paced environment. WORK ENVIRONMENT & PHYSICAL DEMANDS Manufacturing or warehouse environment with moderate to high activity levels. Frequent standing, walking, bending, and reaching required. Regular lifting of up to 50 lbs, with occasional lifting up to 80 lbs. Exposure to noise, heat, and moving equipment is common. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Our Mission Our mission is BIG. Our transformation is key—bringing the right businesses together to lead the energy transition. Our team is ready. What Impact You’ll Make As the leader of the Maintenance team, you will be an active contributor to the success of the New Jersey facility by spearheading the implementation of the TPM pillars and driving overall maintenance excellence through a robust Work Management Process. What You’ll Do • Lead a team of electro-mechanical technicians supporting a 24/5 manufacturing operation, • Align the maintenance organization to prioritize Safety, Quality, Delivery, and Cost, in that order, • Establish a performance-oriented work environment encompassing standard performance appraisals, timely feedback, and disciplinary action when required, • Create a culture of continuous improvement through the implementation of industry best practices, lean manufacturing principles, and skills development for the technician team, • Develop and implement a robust Work Management Process to ensure timely and effective execution of preventive and restorative maintenance work, • Implement best practice KPIs to understand performance and identify areas of opportunity, • Collaborate cross-functionally by working with Engineering, Manufacturing, and Quality to support problem solving and drive resolution to complex issues, • Maintain integrity of the Maintenance Management System data and records, • Coordinate and oversee maintenance work performed by contract partners What You’ll Bring Basic Qualifications • Bachelor’s degree from an accredited university or college or a high school diploma/GED with at least 5 years of experience in a maintenance/manufacturing leadership position, • Minimum of 3 additional years of experience in plant operations (preferencing maintenance experience), • Computer literate with the ability to learn various inventory control systems, SAP, and Microsoft Office products such as Excel and PowerPoint, • Strong knowledge of engineering concepts and maintenance repair methods, • Ability to interpret blueprints, specifications, drawings, and schematics, • Experience with Maintenance Management Systems, • Project Management skills and experience Eligibility Requirements This role requires use of technical data subject to U.S. Government export restrictions and this posting is only for U.S. Persons (U.S. Citizens, lawful permanent residents and protected individuals (e.g., certain refugees and asylees)). Proof of status will be required prior to employment. What Will Make You Stand Out • You have implemented and supported the Total Productive Maintenance (TPM) framework across operations to drive equipment reliability and operational efficiency, • You understand mechanical, electrical, electronic, and electro-mechanical principles and components, • You have demonstrated the ability to work in a fast-paced environment managing multiple, complex operational areas, • You have experience in chemical manufacturing operations and/or CNC machining facilities, • You are someone who is detail oriented with good organizational skills, • Demonstrated ability to communicate clearly and effectively across diverse audiences, both in writing and verbally MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us. All Applicants must submit to background check and drug screening Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position EOE

Director of Maintenance – Bakery Manufacturing Role Summary The Director of Maintenance is responsible for providing strategic and hands-on leadership for all maintenance, reliability, and automation operations within the bakery facility. This role ensures the safe, reliable, and efficient operation of production equipment, utilities, and automated systems supporting 24/7 manufacturing. Success is demonstrated through measurable improvements in equipment reliability, repair efficiency, cost control, and safety. This role also develops and implements structured training programs to strengthen technician skills in troubleshooting, automation, controls, and reliability best practices. The Director of Maintenance leads preventive and predictive maintenance programs, manages breakdown response, oversees maintenance systems and inventory, and supports capital projects, construction, and equipment installations. This position requires strong technical expertise, disciplined leadership, and a proactive reliability mindset. Key Priorities · Drive equipment reliability and up time across all production and utility systems. · Establish a world-class preventive and predictive maintenance culture. · Lead maintenance teams with a strong focus on safety, accountability, and continuous improvement. · Support long-term automation and plant growth strategies. · Ensure compliance with food safety, electrical safety, and machine safety standards. Primary Responsibilities Maintenance & Reliability Leadership · Plan, manage, and continuously improve the preventive maintenance program to maximize equipment reliability and minimize downtime. · Direct and coordinate all corrective maintenance activities across production and facility systems. · Establish and lead structured root cause analysis (RCA) processes to eliminate repeat failures. · Develop, track, and analyze maintenance KPIs related to downtime, MTTR, MTBF, and PM effectiveness. Technical & Equipment Oversight · Provide technical leadership for bakery production equipment. · Ensure proper operation, maintenance, and reliability of compressed air, steam, water, and other critical utilities. · Oversee maintenance and performance of robotic systems and automated production lines, including pick-and-place robots, automated packaging, and material handling systems. · Develop and coordinate preventive and predictive maintenance strategies for the entire facility, reducing unplanned downtime and extending equipment life. · Coordinate preventive and predictive maintenance programs for all equipment. Projects & Capital Execution · Plan and manage construction-related maintenance projects, facility upgrades, and equipment installations. · Coordinate with engineering, contractors, and vendors to ensure projects are completed safely, on schedule, and within budget. · Support commissioning, start-up, and validation of new equipment and production lines. People Leadership & Development · Lead, mentor, and develop maintenance leadership and technician teams. · Lead training and skill development initiatives for maintenance technicians across all production and facility equipment systems. · Foster a culture of ownership, accountability, and continuous learning within the maintenance organization. · Partner cross-functionally with Operations, Engineering and Quality Teams. Qualifications Required · Bachelor’s degree in Electrical Engineering and/or Mechanical Engineering. · Minimum 10–15 years of maintenance experience in food manufacturing (preferred), pharmaceutical, or industrial manufacturing environments. · Minimum 5–7 years in a maintenance leadership or management role. · Strong technical knowledge of bakery or food manufacturing equipment and utilities. · Proven track record of implementing and improving maintenance and reliability practices. · Demonstrated leadership skills with the ability to lead teams in fast-paced, 24/7 manufacturing environments. · Strong communication, organizational, and problem-solving skills. · High work ethic, flexibility, and ability to multitask effectively.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Manager of Fleet Maintenance is responsible for overseeing the Brooklyn Site Maintenance Shop and managing a team of technicians, welders and administrative personnel who are responsible for the preventive maintenance and repair of fleet equipment. The Maintenance Manager is responsible for providing directions to a team of technicians. Responsibilities include implementing and monitoring maintenance policies and procedures to ensure that all repairs and maintenance of Interstate Waste Services/ Action Environmental Service’s equipment, including trucks, containers, and other heavy-duty equipment, are performed in compliance with the Company's safety and compliance standards, and in compliance with all federal and state regulations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Provide directions to technicians, welders, and administrative personnel to ensure that all repair/ maintenance work is performed in a safe, efficient, and timely manner, reallocating resources among sites as appropriate. Oversee coordination, planning & scheduling of all repair work to increase productivity, while effectively managing department's overtime. Monitor the shops operational performance and efficiency and take action to redirect activities appropriately. Report to Leadership on shops' performance; implement procedures for process/programmatic changes for improvement or efficiency., • Manage daily shop safety meetings; fleet walk-arounds; coaching and counseling of maintenance team personnel and conduct corrective action, when necessary; make hiring/ termination decisions in concert with Human Resources and appropriate management; oversee employee training and performance evaluations; evaluate, recommend and approve maintenance personnel recommendations for merit increase, promotion and job changes, as appropriate., • Maintain an on-going preventive maintenance program for all shops within area of responsibility. Identify trends in road calls/ break downs; oversee maintenance of building and other facility needs on site; control maintenance costs relating to personnel, purchasing, inventory control and outsourcing of repairs., • Perform inspections of outside repairs and maintenance to ensure all work is properly completed in accordance with Company safety and compliance procedures and federal and state regulations; follow up where appropriate. Identify training opportunities and, as necessary, document issues and constructively discuss corrective action, as needed, with maintenance personnel., • Accountable for scheduled Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company safety and compliance procedures, and federal and state regulations., • At least 5 years of experience as a Maintenance Manager or Maintenance Supervisor for a large fleet of vehicles or multiple site locations requiring knowledge and application of OSHA Haz Com and OSHA Lock Out Tag Out., • 3 years of leadership experience, • Knowledge of basic computer skills and Microsoft Office., • Advanced Root Cause Problem Solving., • Effective and professional communications skills., • Strong customer service orientation., • Ability to anticipate business needs and plan accordingly to ensure that equipment. employee and fiscal resources are utilized in the most efficient manner., • High level of analytical skill to develop a range of possible solutions to address a wide range of issues., • Organizational skills., • Ability to collaborate and encourage employee engagement., • Good financial management and planning skills; ability to understand financial terms, budgets, tables and reports. Ability to develop realistic, comprehensive plans to make efficient use of resources. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training Salary Range Minimum: USD $110,000.00/Yr. Salary Range Maximum: USD $140,000.00/Yr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level A is the senior technical expert responsible for advanced diagnostics, complex repairs, and technical leadership across all MRF processing equipment. This role sets the standard for safety, workmanship, and reliability while mentoring lower-level technicians. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Advanced Diagnostics & Repair • Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues., • Perform major component rebuilds, overhauls, and precision alignment on critical processing equipment, • Serve as the technical lead on shift and mentor Level B and C mechanics., • Verify quality of repairs, PM execution, and documentation., • Execute and refine PM tasks; recommend changes to intervals and procedures., • Help plan daily plant maintenance workload and allocate jobs according to technician skill level., • Assist in specifying parts, evaluating repair options, and supporting warranty recovery efforts., • Support audits, safety inspections, and external regulatory reviews as the technical representative for the plant. Requirements and Qualifications::, • High school diploma or GED required., • 5+ years of industrial, fleet, or processing maintenance experience with demonstrated mastery of mechanical systems., • Strong welding and fabrication capability., • Proven ability to work independently and lead complex repairs. Preferred: • Experience as a senior technician or millwright in recycling, industrial maintenance, manufacturing, processing, aggregate, or material-handling environments., • OEM training on balers, conveyors, or processing systems. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $32.00/Hr. Salary Range Maximum: USD $35.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues., • Perform PM inspections and corrective maintenance to standard., • Document work accurately in the CMMS., • Support outages, vendor work, and equipment installations., • Follow all safety, LOTO, and PPE requirements., • Mentor Level C technicians and reinforce safe work practices. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years of hands-on maintenance experience., • Proficiency with mechanical systems and PM execution., • Ability to read service manuals and schematics. Preferred: • Experience in industrial maintenance, manufacturing, processing, recycling, municipal utilities, or material-handling systems., • Welding and fabrication skills. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $29.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Job DescriptionBenefits: • Company car, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Our team members have the opportunity to earn the top pay in the area, as well as paid on-the-job training throughout the year. The ideal candidate must be a team player but also be able to work independently. This position requires a friendly and positive attitude toward our customers and co-workers. Benefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • Paid Training, • Company van, • Company iPad, • A path to build the life-long career, • Year-round work 2-3 year minimum experience needed as HVAC installer Requirements: • Must have a current driver's license., • Must be able to pass a background check., • Must be able to pass Pre and Post employment drug screenings., • Diagnoses HVAC, refrigeration and/or electrical system through observation, testing and setup., • Disassembles and reassembles commercial or residential equipment to perform trouble shooting and preventive maintenance., • Operates hand tools, power tools, gauges and measuring equipment to perform service to the equipment and/or mechanical system., • Explains the issue and work and work to be performed and completed to the customer. Provides a timeline and explain any wait times., • Perform routine maintenance and filter changes on equipment in accordance with the customer agreement., • Maintain an inventory and keep the service vehicle supplied with the appropriate stock required., • Maintain a professional appearance., • Build and maintain relationships with our clients.

Job Description HVAC INSTALL TECHNICIANS - LEAD INSTALLERS NEEDED ASAP! We are BUSY! NOW HIRING! RUSSO BROS, East Hanover, NJ & Surrounding Counties! Wanted: Experienced, Seasoned INSTALL LEADS - This HVAC Team is BUSY & GROWING! Great opportunity to join our Team! Our best Techs with a proven track record have top earning potential $$$ - join our team today!!! We’re looking for a detail-oriented & experienced HVAC installation technician to join our team. You’ll be responsible for installing heating, cooling, indoor air quality, & ductwork systems to manufacturers & codes by local jurisdiction. As an HVAC installation technician, you will work as part of a dynamic team providing 5-star customer experience by utilizing your expertise in the HVAC industry. The ideal candidate has the technical skills to understand wiring diagrams, local codes, installation of equipment, while ensuring the equipment is configured and operates properly. Ready to join our growing HVAC team? The position will be based in the field, with your very own company-provided take-home truck. WHY WORK FOR RUSSO BROS? • Highly competitive wages, • Industry leader iand ongoing bonus potential, • Thriving customer base with consistent work all year, • Fully stocked, take-home company truck, E-Z pass, gas card, cell phone, and tablet. No need to come to the “shop” everyday!, • Maintain communication with dispatch, your manager, and parts and installation teams., • Keep your company truck clean, inside and out., • Keep your truck inventory up to date., • Properly complete paperwork., • Have and maintain a clean driving record., • Participate in training allowing you to grow and develop as a professional., • Have or be willing to get the proper certifications. We can help you with this., • Replace heating, air conditioning, air quality, refrigeration, and control systems, • Use electrical testing equipment to check electrical circuits and components, • Test pipe or tubing joints and connections for leaks, • Join pipes or tubing from the equipment to the fuel, water, or refrigerant source, • Lay out and connect electrical wiring using hand tools according to the wiring diagram, • Comply with all applicable standards, codes, policies, and safety procedures, • Tell customers how to properly use their new HVAC equipment, • Certification or associate’s degree from an HVAC program at a technical school and 3-5 + years as an HVAC installation technician (preferred but not required), • Boiler experience necessary to be considered, • Basic understanding of electrical wiring and connections, • Comfortable working in crawl spaces and attics, • Competitive Dental, Vision, and Healthcare Plans, • 401(k) matching, • Short-Term and Long-Term Disability, • Life Insurance, • PTO, • Paid Holidays EOE

Job Description JOB SUMMARY: The HR Generalist maintains and enhances the organization’s human resources by administering employee relations and human resources policies for all plant employees. ESSENTIAL DUTIES AND RESPONSIBILITIES: · Communicate and administer hourly and salaried HR policies, programs and procedures in accordance with state and federal law. · Be aware of employee concerns and problems, and the “pulse” of the organization. · Administer training programs. · Administer benefits: BCBS, MetLife (life, dental, and short-term disability), 401(K), and COBRA. · Actively work toward a safer organization and ensure compliance with all OSHA requirements. Direct safety program within the plant. · Maintain hourly and salaried employee records and files. · Ensure counseling and discipline are handled consistently. Ensure managers know how to administer counseling/discipline and maintain records. · Work with plant supervisors on the administration of performance evaluations. · Manage recruitment, interviewing, hiring and onboarding of new employees. · Oversee the handling of grievances filed by the union through the proper steps. · Interpret and administer union contract language consistently. · Act as a liaison between management and the union. · Prepare and process new employee paperwork. · Responsible for benefits orientation with new employees. · Administer plant absenteeism policy to include calculating monthly percentage. · Prepare the following reports: force, organizational chart, turnover, medical leave/light duty, and any other report requested. · Administer Uniform and Safety Shoe Program. · Collect and issue monthly activity reports and overtime cards. · Order all office supplies and maintain small inventory. KNOWLEDGE, SKILLS AND ABILITIES: · Basic knowledge of state and federal employment and labor laws. · Excellent communication and public speaking skills. · Must be knowledgeable in Excel, Word and Windows. · Ability to interact with all levels of management and plant personnel. EDUCATION AND WORK EXPERIENCE: · College degree · Three (3) to five (5) years of HR Generalist experience preferred · Experience in a labor union, manufacturing environment preferred Company DescriptionThe Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. In June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. Today, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. Okonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.The Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. \r\n\r\nIn June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. \r\n\r\nToday, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. \r\n\r\nOkonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Quotations Specialist - Gear to join our Warshauer Electric Supply team in Parsippany, NJ! Summary: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities. The Quotations Specialist is responsible for establishing relationships with customers and vendors to secure pricing positions for bids. Responsible for reviewing bid packages, formulating project quotations, and providing product knowledge. What You'll Do: • Quote low to moderate profile/complex projects, • Review bid package and all the requirements surrounding the package including technical requirements, approved manufacturers list, commercial requirements, and documentation requirements, • Work closely with Outside Sales or the branch(es) to discuss the strategy and approach for each proposal request, • Format customer request into a standardized spreadsheet for bid review, • Break down bid package and issue Request for Quotation (RFQ) to vendors for project quotation levels while communicating deadline, project information, and any additional pertinent information available, • Receive pricing and put a bid tabulation together for review, • Prepare and submit final proposal with all required documentation, • May negotiate pricing with supplier and offer substitute products where appropriate, • Participate in product meetings, seminars, and training schools to enhance and maintain personal product knowledge, • Meet with the team to discuss vendor strategy and margin levels, • Establish and maintain relationships with customers and suppliers, • In addition to processing bids, increase business by utilizing company digital tools to sell, promote, or demonstrate product knowledge to new and existing customers Qualifications What You'll Need • 2+ years of customer service, project management, or related experience preferred, • Experience with electrical distribution, lighting, and controls, or adjacent industry preferred, • Ability to prioritize and manage multiple tasks and deadlines, • Strong organizational skills, • Product and application knowledge being developed, • Customer oriented and motivated with excellent communication, interpersonal skills, customer service, time management, and problem-solving skills, • Knowledge of computer skills, specifically with Excel/Outlook/Word, PDF editor (Blue Beam or Adobe) and appropriate quoting tools, • Ability to establish good relationships and credibility with all project stakeholders, • Ability to collaborate with sales team, customers, and vendors, • Must possess an entrepreneurial spirit and be self-motivated and enthusiastic about business, • Desire and aptitude to learn quickly with a growth mindset/self-improvement and continuous learning Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Frequently – 21% to 50%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Staff Designer, MCAD Position Profile: The Staff Designer (CAD Designer) provides computer aided design and technical drawing support for new product research and development, including derivatives of our existing product lines under the direction of design engineers the designer shall be capable of interpreting industry design and drafting standards, military specifications and company internal procedures. Minimum Required Qualifications: • Associates degree, Mechanical engineering technology degree or Electrical technology degree, • 6-10 years' experience working as an electro-mechanical designer, • Experience with PTC Technology at least Creo 4.0 and Windchill 12.0, • Experience in mechanical design, material properties, fits and finishes, geometric tolerancing (GD&T) is required, • Strong PTC CREO CAD solid modeling experience and understanding of mechanical design principle, • Demonstrated strong knowledge of separating operations such as turning, milling, drilling, boring and tapping metallic and polymer materials, • Knowledge of fluid components, including sealing element designs, bearings and other mechanical elements, electro- mechanical packaging, PCB design, harness design a plus., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, • Highly computer literate, with MS Office/PC expertise, and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen Essential or Primary / Key Responsibilities: • Prepare detailed 3D design layouts of complex parts and assemblies, including fits, finishes, tolerances and materials selection, as requested by the project engineer., • Prepare simple design layouts of parts and assemblies, including fits and tolerances as requested by the project engineer or higher level designers, • Prepare detailed manufacturing documentation of parts and assemblies in accordance with all company and industry standards, including a thorough tolerance stack-up to prove out design intent for fit and function., • Support the creation of a standard library of parts and features for re-use later to support the department's needs., • Maintain existing documentation through the preparation and incorporation of ECN's and AECN's, • Effectively interprets industry design and drafting standards, military specifications and company internal procedures, • Participate in selected PDR and CDR reviews to help present design parameters., • Must be capable of performing basic trigonometry and solid geometry calculations., • Detail checking of assemblies and drawings to company standards. Including redraws., • Must be knowledgeable in the practical application of Geometric tolerances (GTOL)., • Prepare fully annotated drawings of parts and assemblies from 3D Assembly models., • Responsible for utilizing existing Marotta hardware for new designs/redesigns. This would include detail searches using Marotta's business system and custom software., • Own projects from concept through production in an integrated and product development professional team environment, • Analyze designs and determine opportunities for design improvements., • Work with engineers to develop and evaluate the feasibility of designs., • Analyze and apply tolerances on parts in a way that satisfies the design needs while satisfying manufacturing and inspection.(GD&T certificates preferred), • Create as-built drawing package with a high level of efficiency, • Conduct research as needed, • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to all regulatory and internal system requirements., • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. and support actions to drive company initiatives/goals, • Assist in the training of personnel to perform required technical tasks (as directed), • Consistently demonstrate commitment to company values, • While performing the duties of this job, the employee is regularly required to talk and hear, • The employee is frequently required to reach with hands and arms, and to use hands to finger, handle or feel, • The employee is regularly required to stand, sit, walk, stoop, or crouch, and move about the facility, • While performing the duties of this job, the employee is frequently exposed to conditions typical of a manufacturing/machine shop environment, including, but not limited to: fluids, fumes or airborne particles, moving mechanical parts, noise and vibration, • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • Temperature of work environment may be affected by outside/external temperatures, machining processes, etc., • Days and hours of work are 8 hours/day (Monday through Friday). Overtime and weekend could be required as job duties demand., • No travel is expected for this position We offer a highly competitive compensation package for this outstanding position plus a quarterly bonus along with a full range of top quality benefits and employee services including: medical, prescription, dental, vision, life and disability income insurance programs, 401k retirement plans with company match, generous tuition aid program, paid vacation, sick and personal days, paid holidays and flexible work hours with compressed work week options. We recognize and reward our employee's accomplishments and host several employee engagement events per quarter. This position is at our Parsippany, NJ office location. Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at to learn more about us and to apply. Check out all of our openings at We are an Affirmative Action and Equal Opportunity employer M/F/IWD/Veterans VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $95,000 - $110,000 per year

Job DescriptionBenefits/Perks • Competitive Compensation, • Career Advancement OpportunitiesJob SummaryWe are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: • Follow all safety rules and regulations, • Maintain a clean and safe work environment, • Use blueprints, sketches, or building plans to determine electrical requirements and materials needed, • Install new electrical systems and repair existing systems, • Provide bids for work orders, • Interact with customers, suppliers, and other professionalsQualifications:, • Journeyman Electrician License, • Previous experience as an Electrician is preferred, • Valid Driver’s License, • Ability to stand for long periods and lift heavy objects, • Strong understanding of mathematical concepts and measurements, • Professional appearance and courteous personality

Job Description URGENTLY HIRINGIndustrial Electricians for leading Aerospace Manufacturer! Pay: $36.75 --> $39.35 after 12 months Location: Dover, NJ $5,000 sign on bonus after 90 days! Responsibilities • Locate and repair electrical failures and malfunctions on equipment such as heaters, elements, fuses, lights, contacts, etc., • Repair and install electrical systems and equipment such as motors, transformers, wiring, alarm systems, automatic control systems, etc., and rebuild motors including bearings and armatures., • Understand and apply schematics and electrical blueprints in the troubleshooting of electrical systems, programmable controllers and associated systems., • Assist in the training of less experienced electrical personnel., • Perform all new electrical installations working from schematics and/or blueprints., • Complete and abide by all safety procedures and training classes provided as standard to all Maintenance colleagues within the department., • Perform all duties of an 'A' Electrician when necessary., • Frequently interact with manufacturing personnel internally and with contractors and suppliers externally., • Electrical repair experience, particularly with 480V systems, • Ability to understand and apply schematics and electrical blueprints, • Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, automated systems, PLCs, and industrial controllers, • Proficiency in troubleshooting, pulling wire, bending conduit, VFD installation, and electrical wiring, • High school diploma or equivalent, • Minimum of 6 years of work experience in a manufacturing environment in an Electrician role, • US citizenship to meet Export Control Regulations, • PLC experience is a plus, • Ability to interpret blueprints Benefits: You will be eligible to participate in the Company’s employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: • 3% of your eligible compensation regardless of whether you contribute to the plan, and • 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: • You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Company’s Vacation Policy, in addition to Company recognized holidays. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Mar 30, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About Us: Pro Volt Electrical Contractors is a growing electrical contracting company serving residential, commercial, and industrial clients throughout Northern New Jersey. We specialize in both new construction and service work, and pride ourselves on delivering high-quality, code-compliant work with a strong focus on customer satisfaction and long-term reliability. Position Summary: We are seeking a reliable, self-motivated Journeyman Electrician to join our team. The ideal candidate will be a well-rounded professional capable of working independently on residential and commercial projects, including service calls, upgrades, troubleshooting, and new installations. This role is perfect for someone who takes pride in their craftsmanship, communicates well, and is eager to grow with a fast-paced, forward-thinking company. Key Responsibilities: * Install, maintain, and repair electrical systems in residential and commercial settings * Read and interpret blueprints, electrical schematics, and code specifications * Troubleshoot electrical issues and perform service work independently * Ensure all work complies with the National Electrical Code (NEC) and local building codes * Coordinate with contractors, project managers, and inspectors as needed * Maintain accurate job records, time tracking, and material usage * Mentor apprentices when applicable * Keep work sites clean, organized, and safe Qualifications: * Minimum 4 years of field experience (residential and commercial) * Strong knowledge of NEC, wiring methods, and installation standards * Proficiency in using power tools, hand tools, and electrical testing equipment * Ability to work independently and manage time effectively * Excellent problem-solving and communication skills * Valid driver’s license with a clean driving record * OSHA 10 or 30 certification (preferred but not required) * New Jersey Electrical Journeyman License (preferred but not required) Company DescriptionPro Volt Electrical LLC is a licensed, full-service electrical contracting company based in Hawthorne, New Jersey, serving residential, commercial, and light industrial clients. We specialize in service upgrades, lighting installations, EV charging, panel replacements, remodels, troubleshooting, and electrical design-build projects. Our reputation is built on professionalism, reliability, and top-tier workmanship, backed by hundreds of 5-star reviews. We focus on building long-term relationships with our customers, employees, and partners, and we invest heavily in training, safety, and company culture. At Pro Volt Electrical, we believe our people are our greatest asset. We offer career advancement, leadership opportunities, continuing education, and strong team support. Whether you’re an apprentice just starting your career or an experienced technician, you’ll be valued, supported, and empowered to grow. What Makes Us Different: ✔ Competitive pay with year-round, steady work ✔ Paid holidays and medical benefits ✔ Company vehicles, tools, and training provided ✔ Safe, organized, and professional work environment ✔ Opportunities for advancement and certifications ✔ Family-oriented culture with strong leadership and open communication We take pride in our work and in our team. If you’re looking for a company that values craftsmanship, professionalism, and integrity, Pro Volt Electrical is the place to build your future.Pro Volt Electrical LLC is a licensed, full-service electrical contracting company based in Hawthorne, New Jersey, serving residential, commercial, and light industrial clients. We specialize in service upgrades, lighting installations, EV charging, panel replacements, remodels, troubleshooting, and electrical design-build projects.\r\n\r\nOur reputation is built on professionalism, reliability, and top-tier workmanship, backed by hundreds of 5-star reviews. We focus on building long-term relationships with our customers, employees, and partners, and we invest heavily in training, safety, and company culture.\r\n\r\nAt Pro Volt Electrical, we believe our people are our greatest asset. We offer career advancement, leadership opportunities, continuing education, and strong team support. Whether you’re an apprentice just starting your career or an experienced technician, you’ll be valued, supported, and empowered to grow.\r\n\r\nWhat Makes Us Different:\r\n✔ Competitive pay with year-round, steady work\r\n✔ Paid holidays and medical benefits\r\n✔ Company vehicles, tools, and training provided\r\n✔ Safe, organized, and professional work environment\r\n✔ Opportunities for advancement and certifications\r\n✔ Family-oriented culture with strong leadership and open communication\r\n\r\nWe take pride in our work and in our team. If you’re looking for a company that values craftsmanship, professionalism, and integrity, Pro Volt Electrical is the place to build your future.

Job Description URGENTLY HIRINGIndustrial Electricians for leading Aerospace Manufacturer! Pay: $36.75 --> $39.35 after 12 months Location: Dover, NJ $5,000 sign on bonus after 90 days! Responsibilities • Locate and repair electrical failures and malfunctions on equipment such as heaters, elements, fuses, lights, contacts, etc., • Repair and install electrical systems and equipment such as motors, transformers, wiring, alarm systems, automatic control systems, etc., and rebuild motors including bearings and armatures., • Understand and apply schematics and electrical blueprints in the troubleshooting of electrical systems, programmable controllers and associated systems., • Assist in the training of less experienced electrical personnel., • Perform all new electrical installations working from schematics and/or blueprints., • Complete and abide by all safety procedures and training classes provided as standard to all Maintenance colleagues within the department., • Perform all duties of an 'A' Electrician when necessary., • Frequently interact with manufacturing personnel internally and with contractors and suppliers externally., • Electrical repair experience, particularly with 480V systems, • Ability to understand and apply schematics and electrical blueprints, • Experience with robotic controllers, pneumatic and hydraulic modules, electromechanical sensing, automated systems, PLCs, and industrial controllers, • Proficiency in troubleshooting, pulling wire, bending conduit, VFD installation, and electrical wiring, • High school diploma or equivalent, • Minimum of 6 years of work experience in a manufacturing environment in an Electrician role, • US citizenship to meet Export Control Regulations, • PLC experience is a plus, • Ability to interpret blueprints Benefits: You will be eligible to participate in the Company’s employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: • 3% of your eligible compensation regardless of whether you contribute to the plan, and • 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: • You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Company’s Vacation Policy, in addition to Company recognized holidays. Workplace Type This is a fully onsite position in Parsippany-Troy Hills,NJ. Application Deadline This position is anticipated to close on Mar 30, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview: This position performs installation, maintenance, and repairs of computer driven electro-mechanical production equipment, ensuring that all related quality documentation is executed, while reviewing maintenance procedures for effectiveness. Job Responsibilities and Essential Duties: • Maintenance and repair of computer driven electro-mechanical manufacturing equipment in support of medical device production. o Computer driven systems include proportional-integral-derivative (PID) operating controllers, programmable logic controllers (PLCs), and Human Machine Interface (HMI) automation. o Sub-systems and components include electric drives, motors, electrical wiring, hydraulics, pneumatics, electrical panels, relays, printed circuit board circuitry, vacuum, and compressed air. • Respond to emergency repair requests through troubleshooting, diagnosis, resumption of operation, and electronic documentation., • Execute preventative/scheduled maintenance including planning of materials, parts, training, and other requirements to ensure work is executed in an efficient and timely manner., • Document all work planned and performed in the computerized maintenance management system., • Evaluate operation of equipment and instruments to conduct on-line adjustments. * Evaluate, quote, and order necessary replacement equipment, tools, and fixtures. * May develop or revise documents and procedures., • Build Quality into all aspects of their work by maintaining compliance to all quality requirements. Minimum Requirements : • A high school diploma or equivalent is required. An associate degree or equivalent years of experience in Engineering, Science or related technical field is preferred, • 1-3 years of technician experience in a manufacturing environment is required; experience working in medical device manufacturing or other FDA regulated industry preferred. Required Knowledge, Skills, and Abilities : • Ability to read wiring diagrams, schematics, and plumbing diagrams to expertly troubleshoot electro-mechanical equipment, electric drives, motors, basic wiring, hydraulics, and pneumatics is required., • Working knowledge of flow controls, valve selection, and pressure regulation., • Must demonstrate effective verbal and written communication skills., • Must be well organized and demonstrate the ability to work independently and manage multiple tasks and priorities., • Must be flexible and demonstrate the ability to take initiative., • Working knowledge of equipment powered by 120, 208/230, and 480VAC electrical voltage is required., • Experience with PLC/HMI and MS-DOS programming languages is preferred., • Proficiency with Microsoft Office products such as Word and Excel or equivalent software applications is preferred. The pay for this role is a minimum of $25 per hour ($52k/yr) and a maximum of $33 per hour ($68,640/yr). About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

High School Diploma or GED equivalent preferred; two years of college or vocational training in electrical or mechanical engineering or plumbing preferred. Previous facilities maintenance, plant operations or engineering services experienced preferred.

Job DescriptionMAURY MICROWAVE JOB DESCRIPTION Date: January 2026 Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager Brief Summary of Position: The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position • Soldering under a microscope, • Ability to work with through hole and surface mount components, • Ability to work with 0603 components, • Gap welding and wire bonding experience, • Experience with assembly of microwave components, • Ability to follow PCB layout and read electronic schematics, • 1-2 years of prior work experience in a manufacturing environment Job Qualifications and Training: High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: _x_Safety _x_Company Policies _x_Quality System ___ERP

Job DescriptionJob Title: Cell & Gene Therapy AssociateJob Description Assist in clean room qualification by helping to burden clean rooms for testing. Run supplies and materials as needed for clean room operation and processing. Aseptic gowning is necessary to enter the clean room to help with qualification. Work within manufacturing to help process cells and samples, including processing cultures, cryopreserving, and manipulating cell products using aseptic techniques. Previous experience with GMP practices and following SOPs is essential. The role involves working in a cellular facility. Responsibilities • Assist in clean room qualification and testing., • Run and manage supplies and materials for clean room operations., • Perform aseptic gowning for clean room entry., • Process cells and samples within manufacturing., • Apply aseptic techniques for culture processing and cell product manipulation., • Follow GMP practices and SOPs., • Support cellular facility operations.Essential Skills, • Experience in aseptic operation, pharmaceutical, and laboratory settings., • Previous experience in a biology lab, either academic or industry., • Ability to work in a fast-paced environment., • Previous lab gowning experience.Additional Skills & Qualifications, • Bachelor's degree within the sciences is preferred., • Associate's or bachelor's degree in biology or related scientific field is a plus., • Experience in cell-based biology labs., • Aseptic technique experience., • Ability to effectively communicate within a team environment., • Experience with stem cell preparation, cell/tissue culture, batch records, cell expansions, volume reductions, depletions, and enrichments. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Parsippany-Troy Hills,NJ. Application Deadline This position is anticipated to close on Mar 23, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description The Manufacturing Assembler (Electrical) is responsible for assembling and wiring electrical panels and enclosures in a manufacturing environment as well as supporting installation activities at job sites when required. This role requires strong attention to detail, the ability to read engineering drawings and wiring diagrams, and a commitment to safety, quality, and continuous improvement. Key Responsibilities • Participate in all phases of the electrical panel manufacturing process., • Read and interpret engineering drawings, wiring diagrams, and schematics., • Layout and mount electrical components onto panels., • Wire electrical components according to diagrams and specifications., • Install assembled panels into enclosures., • Perform final wiring and system completion within enclosures., • Support quality inspection activities and identify issues during the Quality Check process., • Prepare completed systems for packaging and shipment., • Identify opportunities to improve manufacturing processes, workflow efficiency, and product quality., • Local travel within approximately a 75-mile radius 1–2 times per month. Contractor Coordination • Provide day-to-day support, guidance, and training to new team members., • Assist in monitoring team performance and identifying training opportunities., • Experience with electrical assembly or similar manufacturing work preferred., • Ability to read and interpret engineering drawings and wiring diagrams., • Strong attention to detail and problem-solving skills., • Commitment to safety, quality standards, and continuous improvement., • Ability to use common hand tools (jigsaw, drill, tapping tools, wrenches, etc.)., • Ability to stand for extended periods and lift up to 40–60 lbs., • Health, Dental, and Vision Insurance, • Paid Vacation Time, • 10 Paid Holidays, • 401(k) with Company Match, • Company-Paid Life Insurance, • Company-Paid Long-Term Care Insurance You should be proficient in: • Electrical Schematics, • Electrical / Electronic Systems, • Mechanical Assembly Skills, • Blueprint Reading

Job Description We are looking for a commercial HVAC service estimator with minimum 5 years of commercial HVAC experience to join our service team. This is a commercial service estimator position; applicants with residential service experience or those seeking a sales\account manager position are not encouraged to apply. Successful applicants must have prior field experience with commercial HVAC services. Responsibilities of this position include: • Review assigned service technician reports for field and diagnostic information, • Identify HVAC parts and materials needed for a service repair, • Collect pricing information for necessary parts and materials from local vendors, • Estimate labor hours needed to make repairs, • Write a scope of work for performing identified repairs, • Use company software systems to prepare quote pricing and issue proposals for customer approval, • Respond to customer questions on repair proposals, • Order materials and parts or select them from inventory for approved proposals, • Check materials and parts for completeness prior to technician dispatch for executing repairs, • Participate in weekly estimator meetings for service quoting, • flexible paid-time-off plan, • 401K plan with matching, • Multiple healthcare plans, including dental, • Vision, Life & Disability insurances, • Offices closed between Christmas and New Years, as well as other holidays, • Great team environment Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job Description Evco Mechanical is looking for experienced service technicians to join our commercial HVAC and boiler service team. Qualified applicants must have 5+ years of experience with preventative maintenance and service repairs on any combination of the following commercial equipment: High efficiency condensing boilers 500,000 BTUH + 5+ ton roof top units water source heat pumps split systems pump stations stand-alone controls Experience with the following manufacturers is preferred: Lochinvar, AERCO, Laars, Raypak Boilers Carrier, Lennox, Trane, Reznor, Aaon Roof Top Units ABB, Teco-Westinghouse, Danfoss VFDs Water Furnace, Johnson Controls, Carrier Heat Pumps Daikin, Mitsubishi, Fujitsu Split Systems B&G, Grundfos, Taco, Armstrong Pumps Company DescriptionEvco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job DescriptionDescription: Hawks, a leader in HVAC, is seeking a qualified Controls Tech to join our team! If you are seeking a role that combines your technical skills and a desire to provide the highest quality of customer satisfaction, then this may be a good fit for you. Job Responsibilities • Perform system design, preventative maintenance, repair, installation and commissioning of Direct Digital Control (DDC) Systems., • Trouble shoot issues that arise during service visits and repair as needed., • Assist with startup, commission and re-commission of customer systems that utilize electrical/electronic technology, • Provide exemplary service to clients, • Respond to emergency calls in a timely manner, • Collaborate with customers on diagnostics and repair of complex systems malfunctions requiring knowledge of a variety of electronic or digital controls systems, • Meets regularly with customer to become familiar with operating problems., • Adheres to all Hawks and customer safety standards, • Participates in training classes as assigned and conducts extensive self-study to develop technical proficiency in the company's product lines., • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance, • Must have and maintain a valid driver's license in good standing., • Basic understanding of control logic, • experience troubleshooting DDC systems., • Must be service oriented and willing to work effectively with customers' on-site staff, • Prior experience in HVAC and/or Building Automation preferred, • Technical Business School Certificate/Diploma OR post high school training with a minimum of 3+ years' experience., • Strong mechanical mindset and attention to detail., • Ability to use hand/power tools and electrical testing equipment., • Ability to climb ladders in excess of 8 feet above ground level and lifting items up to 50 pounds.

Job Description Maitra Associates, P.C. (Maitra), an established multi-disciplined engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets, seeks both recent graduates and experienced civil engineers with 0-6 years of experience for its growing land development group. Projects will include roads, underground utilities, public buildings, recreational facilities, and land use applications. You will participate in the design of various infrastructure projects for the public sector- municipalities, state agencies, and local school districts- and the private sector, both commercial and residential, and report directly to the Project Manager. Duties: • Engage in valuable interactions with external clients, • Analyze survey reports, maps, drawings, blueprints, aerial photography, or other topographical or geologic data., • Assist in preparing construction documents, including drawings and specifications for site layout, grading, drainage, utilities, soil erosion, sediment control, and landscaping., • Estimate quantities and materials, equipment, or labor costs to determine project feasibility., • Assist in stormwater management design., • Perform construction support services, including providing timely data, shop drawing review, and client coordination., • A supportive and flexible work environment that empowers employees to stay healthy, fulfill their passions, and balance work and life goals., • The opportunity to advance your career., • A Learning & Development department that facilitates ongoing soft and technical skills training, • Complete visibility and exposure to all aspects of a project, • Open and transparent communication with senior leadership as well as local office management., • Bachelor’s degree in civil engineering or related field, • The ability to learn quickly, strong communication skills, and a solid work ethic, • A passion for design and creative problem-solving, • Familiarity with government rules and regulations for stormwater management design, • Practical experience with civil engineering software (AutoCAD Civil3D)Company DescriptionMaitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. We aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. The firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.Maitra Associates, P.C. (Maitra) is an established multi-discipline engineering design and construction management firm serving the needs of various clients in the transportation, institutional, and facilities markets. Since our founding in 1982, Maitra has grown from a two-person office to a regional firm headquartered in Bedminster, New Jersey and with offices in New York. \r\n\r\nWe aim to award, manage, and complete projects in the Northeast and Mid- Atlantic Regions. Maitra offers professional services in several disciplines, including civil/site engineering, electrical engineering, mechanical engineering, and construction management and inspection. \r\n\r\nThe firm’s diverse staff comprises experienced professionals who provide client-focused, technically superior, cost-effective engineering and construction inspection services within an interdisciplinary team environment. Maitra is entrepreneurial in spirit, reflecting a culture of flexibility, innovation, and responsiveness while providing the in-depth resources of a full-service organization.

Job Description Job Title: Construction Superintendent Job Description As a Construction Superintendent, you will oversee all phases of public construction projects, ensuring compliance with plans, specifications, and regulatory standards. You will be responsible for developing and maintaining project schedules, budgets, and resource plans, while coordinating with clients, architects, engineers, and subcontractors to ensure timely and cost-effective project delivery. Responsibilities • Manage all phases of public construction projects, ensuring compliance with plans, specifications, and regulatory standards., • Develop and maintain project schedules, budgets, and resource plans., • Coordinate with clients, architects, engineers, and subcontractors for timely and cost-effective project delivery., • Utilize Procore to manage RFIs, submittals, change orders, and project documentation., • Monitor project progress and provide regular updates to stakeholders., • Oversee quality control and enforce safety standards on-site., • Minimum 5 years of experience working with a General Contractor on public projects., • Strong understanding of public project compliance, codes, and regulations., • Proficiency in Procore for project management tasks such as RFIs and change orders., • Excellent leadership, communication, and organizational skills., • Ability to manage multiple projects simultaneously., • Experience with multi-million-dollar public projects., • PMP certification or equivalent project management training. Join a leading public bid contractor where you will have the opportunity to manage projects from inception to completion. Work involves using Procore and scheduling software like MS Project or Primavera. The role requires strong organizational skills to manage multiple projects simultaneously and involves regular site visits to ensure compliance with safety standards and quality control.Super Job Type & Location This is a Permanent position based out of Parsippany-Troy Hills, NJ. Pay and Benefits The pay range for this position is $110000.00 - $135000.00/yr. 401k, medical, dental, vison covered Workplace Type This is a fully onsite position in Parsippany-Troy Hills,NJ. Application Deadline This position is anticipated to close on Mar 27, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Residence Inn by Marriott-Wayne, 30 Nevins Road, Wayne, NJ 07470 We are currently looking for an experienced Chief Engineer to join our Team! Our Residence Inn® by Marriott in Wayne, with 118 full suites, is nestled in a peaceful corner of northern New Jersey. When our guests visit William Paterson University or attend a wedding at The Brownstone or The Tides Estate, there’s no closer hotel. Ice . We are an extended stay hotel, and our suites have full kitchens including a fridge, microwave, and utensils. A great place to stay, a great place to work. The Residence Inn is one of the 50 hotel properties owned and managed by the award-winning hotel management company, Buffalo Lodging Associates. Buffalo Lodging Associates, a hotel management company based out of Canton, MA has put an emphasis on true hospitality since being founded in 1996. While building an extensive portfolio of 50 hotels, we’ve partnered with the most respected hotel brands in the business including Marriott International, Hilton Worldwide, InterContinental Hotels Group, Choice Hotel International and Radisson Hotels. The core and heart of our company lies within our dedicated associates, for we wouldn’t be an award-winning company without each and every one of them. A GROWING HOTEL MANAGEMENT COMPANY – COME JOIN US! We value our associates with competitive compensation plans and other benefits and perks. Some of these benefits include: • Weekly pay, • Paid vacation, sick days and holidays, • Medical, dental, vision insurance, • 401K Retirement plan with company match, • Travel discounts on our branded properties The Chief Engineer takes ownership and pride in the maintenance of the property, while fostering the Buffalo Lodging Associates (BLA) culture and values- Excellence, Passion, Integrity, Inclusive. Responsibilities include: • Creating a safe and appealing property by completing routine preventative maintenance on laundry equipment, heating and air conditioning units, ice machines, fire extinguisher, fire and smoke alarms, lawn sprinkler, lawn equipment, exercise equipment and plumbing, • Maintaining work order assignment boards and tracking completed/pending work orders I and following up on all incomplete work orders to inform the requesting guest or department of the status., • Evaluating and selecting quality vendors that are reliable and provide good value for their price, • At least three years of supervisory or lead mechanic experience in a hotel or related field, • Demonstrated general mechanical skills are necessary, • Basic repair, painting, wall covering HVAC, electrical work, plumbing, boiler operation, pool maintenance and general maintenance skills required, • Vocational training is preferred but not required

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR QpHnpP1sVI

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for an Outside Sales Representative to join our Warshauer Electric Supply team in Parsippany, NJ! Summary: The Outside Sales Representative is responsible for the sales and marketing efforts with the objective of increased profitable sales through creating, building, and maintaining high quality relationships with new and existing customers. Utilize company digital tools and company products and services to connect with consumers, develop creative solutions, generate sales volume, and provide the highest level of customer service. What You'll Do: • Responsible for selling, marketing, promoting, and demonstrating products. Effectively communicate the features and benefits of our product offering, • Increase business by generating sales to new customers and by selling additional products to existing customers, • Collaborate with leadership, team members, and suppliers in planning, tracking, and implementing sales strategies and developing new markets, • Assist customers with product selection and application utilizing knowledge, internal specialists, as well as supplier representatives, • Establish and maintain customer relationships, • Learn and evaluate customer operations to aid in identifying customer objectives, requirements, and preferences in order to present a unique solution to each customer tailored to their business objectives and needs, • Collaborate with customers and team members for product quotations and provide on-going communication throughout the customer's purchasing lifecycle, • Work with management, credit, and customers to resolve payment issues promptly, • Gather and report to management information regarding the company, competitors, pricing, products, and current and future market trends, • Actively participate in professional development to improve professional selling skills and maintain technical capabilities. Participate in company training/development, special promotions, sales meetings, supplier seminars, and training schools to enhance and maintain personal and product knowledge, • Maintain accurate and timely records including sales call schedules and expense reports, • Coordinate sales calls with vendors to introduce and demonstrate products, identify customer needs, and promote product and service solutions, • Utilize and champion digital tools, customer solutions and services to gain a competitive advantage Qualifications What You'll Need • 3+ years of sales or electrical industry experience, • Valid Driver’s License, • Ability to exhibit a positive, friendly, and helpful attitude with customers and to be sensitive to their needs, • Customer oriented and motivated with excellent communication, presentation, organization, and problem-solving skills, • Ability to prioritize and manage multiple tasks and deadlines, • Excellent negotiation skills, interpersonal skills, and ability to drive decisions with influence, • Product and application knowledge essential, • Highly self-motivated, • Familiar with Microsoft Office as well as relevant ERP systems and Customer Relation Management Tools (CRM) Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Constantly – at least 51%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Up to 10 pounds - Occasionally – up to 20%, • Up to 25 pounds - Occasionally – up to 20%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description Public Safety RF Engineer Location: Clifton NJ Description C Squared Systems, LLC is an RF engineering, consulting, and software development company specializing in providing services for seamless wireless coverage from RF analysis to design and implementation of DAS systems and Wi-Fi networks to remote monitoring and management of complex multi-vendor environments. Site Portal®, a customizable Web-based software, was engineered by C Squared Systems to remotely monitor and manage these complex multi-vendor environments. Since 1999, C Squared Systems has executed turnkey in-building wireless solutions using state-of-the-art analysis tools to deliver RF solutions that exceed project scope and customer expectations. Our experience, technical expertise, and diverse projects in the wireless realm have allowed C Squared Systems to continually evolve as new technologies are developed and the demands of our customers change. C Squared Systems is currently seeking a Public Safety RF Engineer responsible for public safety system engineering functions relating to RF/Wireless communications pertaining to In-Building and outdoor, passive and active (Distributed Antenna System) systems. The incumbent will work hand in hand with senior public safety RF engineers in various aspects of DAS design, installation, commissioning, testing, troubleshooting and remote monitoring. The incumbent will also perform various operational support functions such as parts procurement, equipment repair/return, inventory, and documentation. Domestic travel will be expected approximately 25-50% of the time, with the majority of that being within the Greater New York area, but does include other markets as needed. Primary Responsibilities: • Design of Radio Frequency (RF) wireless communication systems and technology, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Develop Request for Information (RFIs) and Requests for Proposals (RFPs) evaluate solutions, manage implementations, and perform Independent Verification & Validation, • Coordinating with AHJ’s, FCC License holders, Carriers, End Users, Facility Managers, and Equipment Vendors, • Supporting the efforts of our technicians and engineers and directly supporting customers, • Ensuring customer satisfaction, • Work hands on with system components such as antennas, fiber optics, coax, and RF amplifiers and receivers, • Radio Frequency Exposure Studies, Intermodulation and Interference Analysis, • Multi-task projects on a day-to-day basis, • Travel to various job sites within Greater New York and other markets., • Strong background in public safety wireless communications, • Experience working with large county or statewide P-25T, P-25C, and analog systems, • Experience with RF Coverage modeling, RF design, and optimization, • Experience with LMR site equipment configuration and test, • Experience in land mobile radio, project management skills, knowledge of database reporting tools., • Familiarity with Public Safety organization operations, • Knowledge of other wireless technologies such as TETRA, GSM, UMTS, CDMA, WiFi, LTE and embedded systems, • Knowledge of microwave, circuit based, and fiber backhaul., • Knowledge of IP-based dispatch consoles and voice recorders, • Professional level certification in Wireless Communications (e.g., ETA, CWNA, Microsoft Wireless Communications Engineering Technologies, GROL Certification), • Experience or familiarity with radio frequency devices and/or systems is highly desirable., • Experience troubleshooting public safety DAS systems including ADRF, Comba, Zinwave, etc., • Familiar with the basics of IP Networking, • Multifaceted Professional capable interfacing with customers, • Proficient in basic computer applications (MS Outlook, MS Word, MS Excel, etc.), • Ability to learn quickly and understand technical materials, • Ability to shift gears quickly as priorities change, • A solid understanding of fundamental engineering principles and the ability to effectively work on multiple engineering projects simultaneously, • Requires knowledge of radio frequency and fiber optic communication technology, • Must be able to work effectively within a diverse work force including engineers, project managers, skilled craft workers, consultants, customers, and regulatory agency personnel, • Must have strong interpersonal and communications skills to be able to effectively communicate complex issues with peers, supervisors, and managers. Must be authorized to work in the US, be willing to travel up to 50%, have a clean driving record and be able to pass a company background check., • A minimum of a bachelor’s degree, preferably in electrical engineering or similar discipline with at least 5 years Land Mobile Radio (LMR) engineering experience. Master’s degree preferred. An equivalent combination of advanced education, training, and experience will be considered.

Job Description Summary: The Apprentice Moldmaker is responsible for learning various mold-making operations including precision milling, grinding, sinker EDM, wire EDM, assembly, and troubleshooting of high precision injection molds. Essential Duties and Responsibilities: • Proactive team member working directly with experienced mold makers, • Safely operate all types of toolroom equipment required to manufacture mold components, • Troubleshoot and repair plastic injection molds., • Maintain the organization of the mold shop. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Interpersonal - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of other team members. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High School Diploma or equivalent. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra, trigonometry, and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Microsoft Windows/Office, Mastercam, Solidworks Certificates and Licenses: No certifications needed Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts; fumes or airborne particles, and the risk of electrical shock. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include Close vision, Distance vision, and Peripheral vision., • While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch, or crawl, and talk or hear. Company DescriptionOur company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition. What makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.Our company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition.\r\n\r\nWhat makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.

Job DescriptionDescription: Build the Next Generation of Technicians At Hawks & Company, we believe great technicians aren’t just hired — they’re developed. We’re looking for a Technical HVAC/R Trainer who is passionate about mentoring others, sharing knowledge, and helping technicians grow their careers. This role is perfect for someone who enjoys teaching, hands-on problem solving, and building the future workforce of our industry. If you love HVAC/R and want to level up your career by developing people instead of just fixing equipment, this role is for you. What You’ll DoTrain the Next Generation You’ll design and deliver training that helps our technicians master the skills they need to succeed. • Develop and deliver HVAC/R technical training programs, • Lead hands-on classroom and field training, • Teach core topics like:, • Refrigeration cycles, • Electrical diagnostics, • Airflow and system performance, • Controls and combustion, • Train best practices for troubleshooting, installation, and maintenance, • Support onboarding and ongoing development for new and existing technicians, • Evaluate technician skill levels and recommend career development plans, • Build relationships with technicians across the company, • Develop training schedules to help technicians reach their next career step, • Create lesson plans, manuals, and skill assessments, • Deliver training on:, • Electrical schematics, • Commercial installation practices, • “Pull-through work”, • Provide on-site field training, • Help expand our Hawks University Training Lab You’ll receive training and certifications including: • Interplay Learning Training Programs, • Lochinvar Equipment Training, • OSHA 30 Certification, • Lull / Scissor Lift Certification, • Confined Space Training, • Lockout/Tagout (LOTO), • WSHP systems, • RTUs, • Ice Machines, • Quarterly training goals achieved, • Technician participation in career-development training, • Total training hours delivered, • Technician engagement with training programs Integrity – Do the right thing Innovation – Always improve Humility – Stay coachable Serve-It-Up – Support your team Above & Beyond – Deliver excellence Why Join Hawks? • Opportunity to shape the next generation of HVAC technicians, • Build and lead a modern training program, • Work with advanced tools and learning platforms, • Competitive pay and benefits What We’re Looking For • Strong HVAC/R technical experience, • Passion for teaching, mentoring, and developing people, • Ability to explain complex technical concepts clearly, • Strong communication and leadership skills, • Desire to help technicians grow their skills and careers

Job Description With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Mechanical Engineer to provide technical leadership and mentorship within our mechanical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing mechanical design work to ensure the delivery of high‑quality, accurate, and consistent engineering outputs across the organization. The Senior Mechanical Engineer will review, sign, and seal mechanical drawings and will also contribute hands‑on design support as required. Project work may include mechanical systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead mechanical engineering design for HVAC, plumbing, and mechanical systems across commercial, industrial, municipal, and infrastructure projects., • Perform mechanical calculations, equipment selections, system sizing, and detailed technical analyses., • Prepare and seal engineering drawings, specifications, and reports in accordance with state PE requirements., • Conduct system modeling (e.g., energy modeling, load calculations) to optimize system performance., • Review and approve design documents prepared by junior engineers and CAD staff., • Ensure all designs meet applicable codes (IMC, IPC, NFPA, ASHRAE, OSHA, local/state regs)., • Process design experience a plus., • Serve as the mechanical discipline lead on multi‑disciplinary project teams, coordinating closely with electrical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and mechanical scope development., • Provide technical mentorship to junior mechanical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for mechanical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Mechanical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of mechanical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Electrical Engineer to provide technical leadership and mentorship within our electrical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing electrical design work to ensure the delivery of high quality, accurate, and consistent engineering outputs across the organization. The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead electrical engineering design for power distribution, lighting, energy, communications, fire alarm, and control systems across commercial, industrial, municipal, and infrastructure projects., • Prepare and seal engineering drawings, specifications, load calculations, fault current analyses, and arc‑flash studies in accordance with state PE requirements., • Oversee electrical system modeling using industry-standard software (e.g., SKM, ETAP, EasyPower, or equivalent)., • Review and approve design documents produced by EITs, junior engineers, and CAD/BIM staff., • Ensure all plans comply with IBC, NEC, IEEE standards, NFPA codes, local building codes, and utility service requirements., • Assist with P&ID development, • Develop process control schematics, • Must have experience working with HVAC equipment, generators and ATS, switchgears, transformers, and fire alarm systems, • SCADA and PLC development and programming a plus, • Panel design experience a plus, • Serve as the electrical discipline lead on multi‑disciplinary project teams, coordinating closely with mechanical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and electrical scope development., • Provide technical mentorship to junior electrical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for electrical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Electrical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of electrical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Employee discounts, • Opportunity for advancement Responsibilities • Maintaining the performance of our lanes, pinspotters/pinsetters, and building equipment., • Conducting preventative maintenance and responding promptly to any necessary repairs.Qualifications, • Basic working knowledge of hand tools, • Basic knowledge of building maintenance inside and outside, • Must be able to work a flexible schedule, • Must be able to stand, walk and bend for extended periodsBenefits/Perks, • Competitive Compensation, • Great Work Environment Work Location: In person in Wayne, NJ

Job Description Job Summary: The Engineer at Hyatt Place is responsible for maintaining the property’s overall functionality, including the building, equipment, and grounds. This role ensures that all hotel facilities and services operate smoothly and efficiently, providing guests with a safe and comfortable experience. Key Responsibilities: • Preventive Maintenance: Perform routine maintenance tasks on all mechanical equipment, HVAC systems, plumbing, electrical systems, and other hotel assets. Ensure the upkeep of guest rooms, public spaces, and back-of-house areas., • Repair Work: Respond promptly to guest or management requests for repair services. Troubleshoot and repair issues related to plumbing, electrical, HVAC, and other mechanical systems., • Safety and Compliance: Maintain the hotel's safety standards by conducting regular inspections and tests, ensuring that all equipment is in compliance with local, state, and federal regulations. Participate in fire drills and safety programs., • Energy Management: Monitor and control energy usage throughout the hotel, looking for ways to improve efficiency and reduce costs., • Documentation: Keep accurate records of maintenance work, inspections, and repairs. Report any unsafe conditions or equipment that requires replacement., • Vendor Coordination: Work with outside contractors and vendors for specialized repairs or maintenance tasks. Oversee their work to ensure it meets the hotel’s standards., • Team Collaboration: Work closely with the housekeeping and front desk teams to address guest concerns and maintain the overall appearance and functionality of the hotel., • Emergency Response: Be available to respond to emergencies, such as power outages, plumbing issues, or fire alarms. Act swiftly to mitigate any issues., • Education: High school diploma or equivalent required; technical or vocational training preferred., • Experience: Previous experience in hotel maintenance or engineering preferred. Experience with HVAC, plumbing, electrical, and mechanical systems is highly valued., • Skills: Strong problem-solving skills, attention to detail, and ability to work independently. Good communication skills and the ability to interact positively with guests and team members., • Certifications: Relevant certifications (e.g., HVAC, EPA) are preferred. The role may require working varied shifts, including nights, weekends, and holidays, depending on the hotel's needs. Requirements • A degree in a relevant field such as mechanical, electrical, or industrial engineering., • Proven experience in a manufacturing facility as a maintenance engineer or in a similar role., • Strong analytical and problem-solving skills., • Knowledge of electrical systems and the ability to use a multimeter, including high and low voltage systems., • Basic welding skills., • Excellent communication and customer service skills., • Ability to work independently and as part of a team., • Physical stamina to perform tasks in a fast-paced environment. Benefits: • Competitive salary, • Health and dental insurance, • Paid time off, • Employee discounts at Hyatt properties, • Opportunities for career advancementCompany DescriptionWe are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.We are in the business of caring for people so they can be their best. Our aim is to create long-term relationships built on being the most loved and preferred brand, employer and partner throughout the world.

Job Description SUMMARY This role supports the reliability and performance of manufacturing equipment by performing routine and corrective maintenance across mechanical and electrical systems. The technician works closely with operations and engineering teams to troubleshoot equipment issues, reduce downtime, and assist with equipment upgrades or installations. The position plays an important role in maintaining safe, efficient production operations while supporting continuous improvement efforts. RESPONSIBILITIES • Troubleshoot and repair issues involving electrical, mechanical, hydraulic, and pneumatic components on production machinery., • Complete scheduled preventive and predictive maintenance activities to keep equipment operating efficiently., • Support production by quickly diagnosing failures and restoring equipment to minimize downtime., • Assist with the setup, installation, and commissioning of new machines or system upgrades., • Work with engineering and production teams during equipment modifications or process improvements., • Document maintenance work, inspections, and replacement parts using a computerized maintenance tracking system., • Identify recurring equipment issues and communicate improvement opportunities to maintenance leadership., • Follow established safety practices, including lockout/tagout procedures, while performing maintenance tasks., • Recognize potential safety risks and participate in corrective actions to maintain a safe working environment. QUALIFICATIONS • Technical training in industrial maintenance, electromechanical technology, or a related field., • Approximately 1–5 years of maintenance experience within a manufacturing or industrial setting., • Hands-on troubleshooting experience with mechanical systems, electrical components, and machine controls., • Ability to read and interpret electrical diagrams, mechanical drawings, and technical documentation., • Familiarity with PLC-controlled equipment and industrial automation is helpful., • Experience working with motors, sensors, presses, or automated production equipment., • Comfort using computerized maintenance management systems for tracking work orders and repairs., • Strong analytical and problem‐solving skills with a detail‐oriented mindset., • Ability to work independently while also contributing to a collaborative maintenance team. BENEFITS • Opportunity to build hands‐on technical expertise working with a variety of modern industrial equipment and automation systems., • Exposure to equipment installations, upgrades, and process improvements that strengthen long‐term career development in maintenance and engineering., • Stable work environment supporting essential production operations., • Collaborative team setting where technicians contribute ideas to improve reliability, safety, and efficiency., • Potential for skill development in areas such as PLC troubleshooting, industrial automation, and advanced maintenance practices.Company DescriptionWith over thirty-five years of Recruiting, Staffing and HR Consulting experience providing nationwide service to many of the largest organizations in the country, Spectrum has achieved a level of experience and expertise that benefits our clients, candidates and contractors. Through an in depth analysis of our client’s organization, we develop an understanding of the skills and experience required for the successful candidate or contractor. EXPERTISE: Our Staffing Consultants are specialists in Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement. STAFFING OPTIONS: Spectrum offers a number of staffing options including, Direct Hire, Contract, Temp, Retained Search, Recruiting Process Outsourcing (RPO) and Pay-Rolling (Payroll Transfer). CANDIDATE COMMITMENT: Spectrum is committed to working with the top candidates and contractors in the country and developing a working relationship with them to secure the career opportunities that will match their skills, experience and personal aspirations. OPEN POSITIONS: To apply online for our career opportunities go to our job board. SPECIALTIES: Areas of specialization include: Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement.With over thirty-five years of Recruiting, Staffing and HR Consulting experience providing nationwide service to many of the largest organizations in the country, Spectrum has achieved a level of experience and expertise that benefits our clients, candidates and contractors. Through an in depth analysis of our client’s organization, we develop an understanding of the skills and experience required for the successful candidate or contractor. \r\n\r\nEXPERTISE: \r\nOur Staffing Consultants are specialists in Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement. \r\n\r\nSTAFFING OPTIONS: \r\nSpectrum offers a number of staffing options including, Direct Hire, Contract, Temp, Retained Search, Recruiting Process Outsourcing (RPO) and Pay-Rolling (Payroll Transfer).\r\n \r\nCANDIDATE COMMITMENT: \r\nSpectrum is committed to working with the top candidates and contractors in the country and developing a working relationship with them to secure the career opportunities that will match their skills, experience and personal aspirations.\r\n\r\nOPEN POSITIONS:\r\nTo apply online for our career opportunities go to our job board. : \r\nAreas of specialization include: Human Resources, Scientific/Medical Device, Engineering, Insurance and Business Operations placement.

Job Description We are looking for a Commissioning Manager to oversee and manage the preparation and coordination of commissioning activities for a portfolio of microgrid projects utilizing solar PV, battery energy storage systems (BESS), generators, and associated switchgear and controls. You will own the commissioning planning, documentation, scheduling, and resource coordination across multiple active project sites. This is a great role for someone looking to play an important technical role at a fast-growing PE-backed business. You will report to our VP of Project Engineering and Preconstruction and will be a hybrid role based out of our Oakland, CA, Santa Monica, CA, Ridgewood, NJ, or NYC offices. Key responsibilities will include: • Develop, manage, and maintain commissioning plans, schedules, and execution strategies across multiple microgrid projects simultaneously., • Define commissioning scope, sequencing, resource requirements, readiness criteria, acceptance criteria, and handoff requirements for solar PV, BESS, generators, switchgear, protection, and controls., • Establish and maintain standardized commissioning processes, templates, procedures, and documentation to be used across the project portfolio., • Track commissioning progress, risks, and constraints across all active sites and communicate status to project leadership., • Coordinate commissioning activities performed by EPCs, OEMs, integrators, utilities, and third-party independent commissioning agents., • Manage interfaces between commissioning activities and construction completion, energization, and utility interconnection. Support temporary power planning, procurement, and implementation for on-site commissioning activities., • Collaborate closely with Engineering, Project Management, EHS, Controls, and Operations teams to ensure commissioning readiness., • Review and approve commissioning test plans, FAT/SAT procedures, and functional test scripts., • Ensure integrated system testing validates microgrid functionality, including islanding, resynchronization, black-start, and load management., • Coordinate with utilities, AHJs, and inspectors to support energization, witnessing, acceptance, and performance testing., • Ensure proper turnover of commissioned systems to Asset Management, including training coordination and documentation completeness., • Capture lessons learned and continuously improve commissioning processes across the portfolio.The Ideal Candidate:, • 10+ years of experience in commissioning management, power systems engineering, or project delivery for DER, microgrid, or utility-scale power systems., • Demonstrated experience managing commissioning activities rather than solely performing field execution., • Experience coordinating multiple stakeholders across parallel project sites., • Experience managing third-party commissioning agents or EPC-led commissioning efforts., • Familiarity with grid-forming and grid-following inverter-based resources., • Strong program-level planning and organizational skills., • Clear communicator capable of aligning internal teams, vendors, and utilities., • Proactive problem solver with a systems-level mindset., • Comfortable operating in a matrixed, fast-paced project environment., • Understanding of onsite power generation, including parallel operation with the utility bus as well as with other DERs, both in grid parallel mode and island mode operations., • Solid understanding of the utility side of the interconnection., • Ability to interpret single-line diagrams, control narratives, protection schemes, and network architectures., • Willingness to travel selectively to project sites for key commissioning milestones.

Job Description We Empower the Fighting Spirit in You! We Offer • Compensation package: Competitive base salary plus bonus., • Comprehensive health benefits: Full coverage for medical, dental, and vision., • Free membership perks: Complimentary access to all our fitness centers., • Employee discounts and special offers: Exclusive deals on fitness products and wellness services., • A fitness-focused workplace vibe: On-site fitness classes, wellness programs, and a supportive community., • Ongoing in-house training: Regular workshops and training sessions., • Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns., • Works on special projects as directed by the General Manager and Operations Manager., • Maintains the history file on all equipment., • Procure repair parts, materials, tools, and equipment., • Performs monthly OSHA safety checks as required on the OSHA / PM guidelines., • General knowledge of HVAC and/or electrical equipment, • The ultimate Big Gym experience, UFC GYM raises the bar of what big-box gyms should offer their members.

Job DescriptionBenefits: • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Signing bonus, • Training & development We are looking to expand our team and have for experienced irrigation/sprinkler service technicians. Green-Way has built itself on high standards of customer satisfaction and we are looking for a trustworthy individual who can professionally communicate and diligently provide maintenance services for our irrigation and outdoor lighting clients. A qualified applicant must meet or exceed the following requirements: Work experience in the irrigation field (minimum 3 years) Valid / clean driver's license - subject to insurance approval Ability to communicate clearly in English -- verbally and in writing Physically capable of digging, lifting, bending and climbing on job-sites Dependable and motivated Strong organizational skills Customer service skills personable for client interaction and experience Electronically savvy use of tablet for scheduling and record keeping Knowledge of electrical (wiring of components) Knowledge of plumbing (connections and repair of piping) Please reply to this ad with your resume and contact information or visit our website to apply Serious applicants only.