Electrical training jobs in Hauppauge, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $25.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Schedule: Overnight Wednesday to Sunday 6pm to 5am. Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Performs all work in accordance with established safety procedures., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assists in the repair and adjustment of equipment., • Washes vehicles and equipment., • Conducts safety checks on vehicles., • Assists with service calls for breakdowns., • Perform other maintenance related work as required., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Requirements and Qualifications:: • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools. We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Overview: Fuel Your Career with Us! Are you a skilled Diesel Mechanic looking for your next opportunity? Join our team at Interstate Waste Services and put your expertise to work! Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component. Requirements • 2+ years’ experience working as a heavy-duty Diesel Mechanic, • Hydraulics experience is highly preferred, • Engine and transmission maintenance and repairs, • Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar., • Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components., • Maintain and repair exhaust systems equipped with DPF systems., • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards., • Assists with service calls for breakdowns, • Must be able to provide own tools., • A valid driver’s license is required., • Competitive wage (based on experience) plus Time and a half for Overtime., • Union Shop., • Medical, dental, vision, life, short-term and long-term disability coverage., • 401(k). We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $24.41/Hr. Salary Range Maximum: USD $50.00/Hr.

Job DescriptionDescription: Job Description Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/ Mechanical and Hydraulics. Our ideal candidate is a team player and has a passion for working with their hands, utilizing various tools, materials and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician’s responsibilities will be testing, troubleshooting, tearing down and building aircraft components. All positions require knowledge of our procedures as it pertains to processes and documentation. On the job training and oversight is provided by NEACO management. Essential Responsibilities • Commitment to company values and ethics, • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2+ of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading, and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 50 lbs., • The ability to walk up stairs, • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium components, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • A&P license/certificate is not required (but it is a plus)., • Hourly position commensurate with experience level and skill level and/or certifications. ($24 - $32) Northeast Aero Compressor is an equal opportunity employer. For more information go to our website at Requirements: Compensation details: 24-32 Hourly Wage PIcda5828d23d1-25405-39393356

Job Description Summary: This position you will train as a service technician to do routine maintenance and troubleshooting on our customers’ equipment. Provide support to senior service technicians while learning how to install, program and test new petroleum equipment. Analyze electrical and mechanical problems and provide repairs as required. Perform scheduled repairs and preventative maintenance to fueling systems. Communicate with customers and explain technical issues in a non-technical manner. Successfully complete Service Technician Training and corresponding training modules. Responsibilities: * Assists in conducting routine inspections and maintenance tasks at service stations, including checking fuel dispensers, underground storage tanks (USTs), piping systems, and other equipment. * Supports the troubleshooting and diagnosis of equipment malfunctions, leaks, and performance issues under the guidance of experienced technicians. * Participates in preventive maintenance activities. * Assists in the cleaning, painting, and general upkeep of service station facilities. * Aids in the installation, basic repairs, adjustments and replacement of equipment, parts, and accessories, including fuel nozzles, hoses, filters, meters, signage, and lighting fixtures. * Assists with inventory management tasks. * Follows established safety protocols, personal protective equipment (PPE) requirements, and hazard communication standards to minimize risks of injury. * Maintains accurate records of work performed, equipment inspections, maintenance activities, and inventory usage. * Performs other related duties as assigned. Qualifications: * Valid driver's license with a clean driving record. * Excellent interpersonal and customer service skills. * Excellent time management and organizational skills. * Ability to follow instructions, work effectively in a team environment. * Strong knowledge of hand tools usage and various types of telecommunication instrumentation devices. * Basic understanding of safety protocols. * Heavy work frequently working in difficult work positions and/or with physical demands such as continuously lifting/moving materials greater than 50 pounds. * Must be capable of climbing ladders to install and retrieve equipment. * Basic hand tools, volt multimeters, computer knowledge. Benefits: * Medical, Dental, and Vision Insurance are offered. * Accrued paid time off. * 401k. * Paid Holidays. * Paid Training and professional development assistance. Experience: * High school diploma or equivalent education required. * OSHA certification is preferred. * Relevant related experience is preferred. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Successful completion of a NYS two-year Electrician Traineeship or NYS two-year electrician training program; OR successful completion of any equivalent electrical two-year training or apprenticeship program;. At Stony Brook Medicine, our Electricians perform journey level electrician work and frequ

Job Description Who Are We? FDH Aero is a trusted global supply chain solutions partner for aerospace and defense companies, helping to shape the industry by simplifying the supply chain. With over 60 years serving as a leading independent industry partner, FDH specializes in hardware, electrical, consumables and expendables, licensed products, and value-added services for global OEM and aftermarket customers. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. Why Work Here? At FDH Aero, we understand that the strength of our brand comes from our people. We invest in driven, diverse and experienced professionals who are naturally curious, courageous and motivated towards action. We value tempering confidence with humility, and a mission that always starts with service-first. Our values guide everything we do: We Are Service First - We act with agility and intelligence to solve our partner’s most pressing needs. We safeguard our trusted relationships by communicating with clarity and unmatched follow through. We Are Respectful - We behave with dignity, fairness, and acceptance. We thrive by prioritizing empathy, humility, and connection to our collective community. We are Amplifiers - We invest in driven, diverse and experienced professionals, businesses and partners. We fuel the entrepreneurial spirit by providing autonomy, authority and a clear mission. We Are Open-Minded - We communicate with intention, curiosity, and diversity of thought. By actively contributing with courage and candor, we challenge the status quo and innovate together. We Are Accountable - We own responsibility for our outcomes. We set expectations, embrace critique, and empower every employee to take immediate actions on challenges they encounter. We Value Our People - That’s why we offer competitive benefits, including medical, dental, vision, Flexible Spending Accounts (FSA), 401k matching, and wellness programs. We invest in training, mentorship, and career development to empower our employees to reach their full potential. Our commitment to culture and excellence has earned us recognition as one of Aviation Business News' Best Places to Work in Aviation. As a team member at FDH Aero you are trusted to deliver, to innovate, and to drive next-generation solutions for tomorrow’s supply chain demands. Ready to make an impact? We proudly pursue top talent with a diverse and global set of experiences and backgrounds. We Are Looking For The Assembly Support Associate is responsible for performing basic value-added tasks, such as labeling and packaging, under close supervision. This role supports production processes by following standard instructions and conducting initial quality checks to ensure product readiness. What You'll Do (Responsibilities) • Perform basic value-added tasks following standard instructions, ensuring products are correctly marked and securely packaged for shipment., • Conduct initial quality checks under close supervision, inspecting for visible defects, proper labeling, and packaging integrity before moving products to the next stage., • Report any issues or deviations to leads or supervisors, such as mislabeled items, damaged packaging, or material shortages, providing clear observations for resolution., • Preparing materials with adhesives or bonding agents as directed, ensuring they are ready for use in value-added processes., • Utilize basic computer skills and access work orders as guided by supervisors, • Maintain a clean and organized workstation by arranging tools, materials and components neatly and ensuring easy access and compliance with workplace safety and efficiency standards, • Assist in sorting and organizing incoming materials, verifying quantities against documentation under close oversight., • High school diploma or equivalent, • No prior experience required; on-the-job training provided. Previous assembly or production experience in the electronics industry preferred., • Eager to learn and follow instructions with strong attention to detail, • Ability to work effectively as part of a team in a structured environment, • Basic verbal communication skills to report issues and follow directives, • Willingness to adhere to safety protocols and standard operating procedures under supervision Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR Requirement Job Type: Full Time FDH Aero is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications Test, troubleshoot and debug electrical components and systems Regularly work with power output up to 450 kV and up to 6kW Work on multiple projects varying in complexity from inception to completion Analyze equipment to establish operating data and conduct experimental tests Works with technical personnel to ensure prototype models are assembled according to design specification Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards Generate, revise or finalize BOMs Create and maintain engineering reports Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service Participation in the creation of technical documentation, system manuals and customer facing documentation Follow all VJX and OSHA workplace safety requirements and policies Safety Sensitive Position Essential Skills: Bachelors Degree in Electrical Engineering Minimum of 3 years of experience in a manufacturing environment Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams Knowledge of analog circuit design Familiarity with soft switching techniques, schematics capture and PCB layout Ability to solve complex technical problems with minimal supervision Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters Proficient soldering skills Proficiency in the English language with established written and verbal communication skills Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics Proficiency in Outlook, Microsoft Word, Excel and PowerPoint Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization Must be legally authorized to work in the US Will need to successfully pass a drug screening and background check Non-Essential Skills: Knowledge of CE, UL, or other applicable regulatory guidelines or standards Basic understanding of an ERP system Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Must be able to fulfill essential job function in a consistent state of alertness and safe manner May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals.This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32) PG Aerotech is an equal opportunity employer. Visit our website at PG Aerotech | Jet Parts Engineering Requirements:

Job DescriptionEngineering Technician – Aerospace Electronics Location: Suffolk County, Long Island Workplace Type: On‑Site Industry: Aerospace • Defense • High‑Reliability Electronics Join an industry‑leading aerospace electronics manufacturer that designs and builds mission‑critical technology used in aircraft, defense platforms, and advanced industrial systems. We are growing—and we’re looking for motivated Engineering Technicians to support testing, troubleshooting, and light design work on cutting‑edge electronic products. This is a long‑term, career‑building opportunity with strong visibility to engineering leadership, extensive cross‑training, and a clear path to expanded responsibilities over time. Ideal for experienced technicians OR recent electrical engineering graduates eager to get hands‑on experience. What You’ll Do • Perform testing and component‑level troubleshooting on complex aerospace and high‑reliability electronic assemblies, • Diagnose test equipment or fixture issues and help implement corrective actions, • Set up, adjust, and operate both manual and automated electrical test equipment, • Collaborate with Engineering and Manufacturing teams to clarify designs and support continuous improvement initiatives, • Document and communicate technical findings to Test, Design, and Engineering leaders, • Determine test methods and sequences for new assignments; offer technical guidance to peers as you grow, • Cross‑train into additional technical functions such as test automation, hardware validation, or fixture design, • Experience troubleshooting electronics to the component level, • Strong diagnostic ability using oscilloscopes, meters, and standard bench instrumentation, • Ability to read and interpret schematics, • Familiarity with electrical/electronics testing processes and best practices, • Hands‑on experience from internships, labs, senior design projects, co‑ops, or previous technician rolesNice‑to‑Have Skills, • Exposure to automated test systems or scripting, • Hardware test or validation experience, • Ability to create or follow structured test plans Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Bohemia,NY. Application Deadline This position is anticipated to close on Mar 21, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionDescription: Maxxima is an established LED lighting and electrical supply brand serving the consumer home and transportation markets. We are seeking a Product Sourcing Associate to support our ecommerce division, MaxximaStyle, as we continue expanding our portfolio of 500+ product SKUs. This role works closely with our Sourcing Manager to support sourcing, procurement, and product development, as well as vendor management and category management. The ideal candidate will help manage supplier relationships primarily with overseas manufacturers in China, while conducting market research and competitive analysis to support the continued growth of our product line. This is an excellent opportunity for a detail-oriented sourcing or procurement professional to work closely with our Sourcing Manager on key product sourcing initiatives. You’ll coordinate new product onboarding, support supplier performance evaluations, and collaborate with marketing and engineering on packaging, manuals, and other product content. Please note that this role requires full-time onsite attendance at our headquarters in Hauppauge, NY. Key Responsibilities: • Support product sourcing, product development, and procurement for new and existing products, including LED lighting, smart home, Wi-Fi technology, and electrical accessories, • Collaborate with current overseas manufacturing suppliers and help identify new global sourcing opportunities, primarily from China and other Asian markets, • Conduct market research and competitive analysis to identify emerging trends, new product opportunities, and potential supplier partnerships, • Support negotiations for pricing, payment terms, and delivery schedules to ensure quality and cost efficiency, • Coordinate the submission, inspection, and documentation of product samples, • Maintain detailed product specifications, sourcing records, and vendor information within internal databases, • Partner with cross-functional teams, including marketing, engineering, and quality assurance, to support new product launches and supplier communications, • Monitor supplier performance and assist in addressing any quality, production, or delivery issues, • Assist with purchase planning and scheduling to align with inventory and sales forecasts, • Associate’s degree required; Bachelor’s degree preferred in business, supply chain management, logistics, procurement, or related field, • 2–5 years of experience in product sourcing, procurement, or supply chain operations, • Basic understanding of sourcing, procurement, and supply chain processes, • Experience working with overseas suppliers or manufacturers, • Strong attention to detail with the ability to manage multiple priorities in a fast-paced environment with a sense of urgency, • Proven ability to analyze product data, identify sourcing opportunities, and solve problems independently and as part of a team, • Excellent communication and relationship-management skills, • Strong organizational and project coordination abilities, • Opportunity to directly influence the growth of an expanding ecommerce product line, • Exposure to global sourcing and supplier management, • Collaborative team environment with strong cross-departmental involvement, • Paid time off plus a paid volunteer day with one of our partner nonprofits, • 401(k) with company match and eligibility, • Generous benefits package with highly subsidized medical coverage and healthcare concierge services, • Company-paid life insurance and voluntary dental & vision coverage, • Access to our Employee Assistance Program (EAP), • Save on our products and enjoy exclusive team member perks, • Discounts to concerts, movies, and theater Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination. Requirements:

Job Description OVERVIEW Supervise all on-site construction activities to ensure safety, schedule delivery, quality of work and adherence to the budget meet all requirements of the contract documents. Must be willing to travel! ESSENTIAL FUNCTIONS OF THE POSITION • Review and analyze all project construction documents including but not limited to drawings, specifications, amendments, accident prevention plan, quality control plan, and scope of work., • Coordinate and inspect sub-contractor work to ensure compliance with contract documents including drawings, specifications, submittals, quality control, and safety requirements., • Identify issues, RFI needs, and field changes promptly with practical solutions., • Oversee equipment utilization, material deliveries, and manpower allocation., • Support project closeout, punch list management, and turnover procedures., • Document daily on-site activities and progress including labor, work performed, inspections, deliveries, delays, weather conditions - with narrative and photos., • Coordinate and hold regular "tool talk" meetings to ensure project is on schedule and subcontractors understand the project plans and specifications., • Identify and communicate site safety concerns, conditions, and problems., • Implement and enforce accident prevention plans., • Assist with schedule development and updates, progress reports, and look ahead reports. QUALIFICATIONS • Minimum of 7+ years continuous experience in construction industry or equivalent combination of education, training, and/or experience., • Knowledge of building construction means and methods, scheduling and cost control procedures, general contract, general conditions, subcontract documents, plans, drawings, and specifications., • Ability to read, understand and interpret contract documents, drawings specifications, scopes of work and project schedule., • Demonstrated leadership and interpersonal skills., • Valid driver's license., • OSHA certification., • USACE CQM Cert - preferred or willing to obtain, • USACE EM385 – preferred or willing to obtain., • CPR & First Aid Certificate, • Experience with Procore desired., • Ability to follow directions, work with minimal supervision and exercise discretion and judgment regarding matter of significance. The conditions described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools, or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to fifty (50) lbs. The employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Professional development assistance, • Vision insurance

Job Description For more than 60 years, Data Device Corporation (DDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. This position is 100% onsite at our Bohemia, NY office. Salary Range for this position is $22.00- $29.00 hourly, depending on experience. This position requires a U.S Person or a person who can qualify for a Department of State or Department of Commerce License. Position Summary: The Test Technician B will perform moderately complex testing procedures to ensure product reliability and performance. This role works under general supervision and supports engineering, quality, and operations teams by conducting testing, troubleshooting issues, and maintaining equipment in accordance with company and regulatory requirements. Key Position Accountabilities: • Set up, operate, and adjust manual and automated test equipment to perform routine and moderately complex testing., • Execute established test protocols to verify functionality and performance of products., • Troubleshoot and resolve moderately complex testing issues, escalating advanced problems to senior technicians or engineering., • Maintain, clean, and calibrate test equipment to ensure accuracy and reliability., • Record test data accurately and prepare summaries for review by engineering and quality teams., • Follow established test procedures and provide feedback on potential improvements., • Support continuous improvement initiatives by identifying ways to improve efficiency and reduce testing errors., • Ensure compliance with all safety standards, including the use of protective gear and safe handling of test materials. Required Knowledge, Skills, and Abilities: • Proficiency with standard electronic test equipment (oscilloscopes, multimeters, auto-test systems, temperature chambers, etc.)., • Ability to perform troubleshooting and resolve routine to moderately complex test issues., • Knowledge of electronic testing procedures and methodologies., • Technical, vocational, or military training in electronics, electrical engineering, or a related field., • 3+ years of experience in a test technician role working with electronic systems or components., • Manual dexterity and hand-eye coordination to use small tools and microscopes., • Specific vision abilities including close vision and the ability to adjust focus., • Ability to remain stationary for extended periods during testing. that are required of the employee. This job description indicates, in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the ADA) expected of the incumbent. Duties, responsibilities and activities may change at any time with or without notice as required. Data Device Corporation is an Affirmative Action/Equal Opportunity Employer and is committed to providing equal employment opportunity (EEO) for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, sexual orientation, gender identity, national origin, citizenship status, marital status, genetic information, disability, protected veteran status or any other legally protected status.

Job DescriptionDo you know wiring, lights, sirens, or 12V vehicle electronics? Then you might be exactly who we're looking for. Island Tech Services is hiring a full-time Auto Technician for their Ronkonkoma, NY location. This role builds and custom outfits police, fire, and emergency response vehicles with the equipment first responders rely on every day. This is hands on, fast paced work where you'll go home knowing you worked on something that actually matters. Responsibilities • Perform custom installations of emergency lighting, sirens, radios, partitions, and other vehicle components., • Wire and test electronic components to ensure proper function and safety., • Diagnose, troubleshoot, and repair equipment and systems as needed., • Follow established procedures, safety protocols, and quality standards., • Document work performed, including parts used and time spent, in accordance with company and client requirements., • Collaborate with other technicians and team members to meet project deadlines., • Maintain a clean, organized workspace and care for all tools and equipment., • High school diploma or GED required; technical or trade school preferred., • Previous experience with vehicle upfitting, automotive electronics, or a similar field is strongly preferred., • Knowledge of vehicle electrical systems, wiring, and diagnostic procedures., • Ability to read and interpret technical manuals, wiring diagrams, and schematics., • Strong attention to detail, troubleshooting, and problem-solving skills., • Ability to work independently and as part of a team., • M-F hours, no weekends, • Opportunity to work in a dynamic, fast-growing industry, • Supportive team environment with ongoing training and development Benefits: 401(k) • Health Insurance • Vision • Life Insurance • Paid Time Off Work Location: Ronkonkoma, NY (In Person) Pay: $19–$25/hour - depending on experience

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development, • Vision insurance VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive PositionEssential Skills:, • Bachelors degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Legally authorized to work in the US and able to successfully pass a personal background check and drug screeningNon-Essential Skills:, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job DescriptionSalary: The Senior Estimator is responsible for managing the electrical estimating process and producing comprehensive bid estimates for commercial construction projects. In this role, you will demonstrate your construction cost estimating techniques and knowledge in quantity takeoffs, as you complete the entire bid from the beginning to the completion of the tender Key Responsibilities: • Produce accurate estimates of material and labor costs for the electrical element of the project., • Prepare and send out accurate electrical estimates and tender documentation., • Analyze all quotes received for electrical material and labor costs and efficiently utilize negotiation skills to achieve the best value., • Evaluate technical requirements and estimating costs to determine prices and margins of all electrical equipment., • Create estimates/quotations to potential customers - ensuring both the customer and business needs are met, and the forecast is in line with requirements., • Work closely with Branch Manager, Subcontractors, Engineers and Development Managers during the estimating/tender process - building stable working relationships., • Utilize estimating software such as Accubid and Bluebeam., • Evaluate bid opportunities and liaise with potential clients, working within project deadlines to produce accurate electrical estimates., • Review and understand all project plans, requirements and specifications., • Review quotes and estimates with Branch Manager and Pre-Construction Manager to prepare recommendations for resolution of any project risks., • Identify and report escalation factors in the marketplace for specific materials and labor rates., • After submittal, actively compare and analyze competitive subcontract and supplier bids., • Ability to substantiate all aspects of final estimates. Qualifications • Advanced electrical estimating experience., • Proficient in estimating software., • Ability to estimate all types of projects., • Knowledge of standard electrical pricing Requirements: • High School or GED., • 8-10 years work experience (10+ years Preferred.), • Associates or Bachelor's Degree (Preferred). Work Environment: This job is fully in person, on site. Salary: $120,000 - $150,000 (DOE) Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Equal Employment Opportunity HATZEL & BUEHLER provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HATZEL & BUEHLER complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. HATZEL & BUEHLER expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of HATZEL & BUEHLERs employees to perform their job duties may result in discipline up to and including discharge. Americans with Disabilities Act Applicants as well as employees who are or become disabled must be able to perform the essential job functions either unaided or with reasonable accommodation. The organization shall determine reasonable accommodation on a case-by-case basis in accordance with applicable law.

Job Description Who Are We? FDH Aero is a trusted global supply chain solutions partner for aerospace and defense companies, helping to shape the industry by simplifying the supply chain. With over 60 years serving as a leading independent industry partner, FDH specializes in hardware, electrical, consumables and expendables, licensed products, and value-added services for global OEM and aftermarket customers. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. FDH is headquartered in Commerce, California, and has operations across the Americas, EMEA and APAC. FDH Aero – named a Best Places to Work in Aviation in 2024 – has locations in 14 countries across the globe, with more than 1,500 best-in-industry employees and over 650,000 square feet of inventory space. Why Work Here? At FDH Aero, we understand that the strength of our brand comes from our people. We invest in driven, diverse and experienced professionals who are naturally curious, courageous and motivated towards action. We value tempering confidence with humility, and a mission that always starts with service-first. Our values guide everything we do: We Are Service First - We act with agility and intelligence to solve our partner’s most pressing needs. We safeguard our trusted relationships by communicating with clarity and unmatched follow through. We Are Respectful - We behave with dignity, fairness, and acceptance. We thrive by prioritizing empathy, humility, and connection to our collective community. We are Amplifiers - We invest in driven, diverse and experienced professionals, businesses and partners. We fuel the entrepreneurial spirit by providing autonomy, authority and a clear mission. We Are Open-Minded - We communicate with intention, curiosity, and diversity of thought. By actively contributing with courage and candor, we challenge the status quo and innovate together. We Are Accountable - We own responsibility for our outcomes. We set expectations, embrace critique, and empower every employee to take immediate actions on challenges they encounter. We Value Our People - That’s why we offer competitive benefits, including medical, dental, vision, Flexible Spending Accounts (FSA), 401k matching, and wellness programs. We invest in training, mentorship, and career development to empower our employees to reach their full potential. Our commitment to culture and excellence has earned us recognition as one of Aviation Business News' Best Places to Work in Aviation. As a team member at FDH Aero you are trusted to deliver, to innovate, and to drive next-generation solutions for tomorrow’s supply chain demands. Ready to make an impact? We proudly pursue top talent with a diverse and global set of experiences and backgrounds. We Are Looking For The Warehouse Associate will be responsible for work orders, shipping orders and requisitions, receiving, storing, packaging and distributing aircraft parts and ground support equipment (GSE), while performing packaging, lot receiving and cycle count job functions safely, accurately, and efficiently for all Business Units. What You'll Do (Responsibilities) • Inspect and identify aircraft parts and receive them into computer software applications, • Load/unload inventory onto shipping containers and flatbed trucks, • Read customer orders, work orders, shipping orders and requisitions to determine items to be pulled from inventory, • Package parts to ship to customers using specific packaging methods to ensure that the parts are fully protected and compliant to customer specifications, • Maintain inventory controls by documenting part traceability and storing pictures using the company’s network drive and applications, • Pull parts from specific locations within the warehouse and stage them in areas for preparation of shipments, • Mark materials with identifying information using appropriate methods, • Validate and record amounts of materials or items received, distributed or cycle counted via appropriate computer program, • Weigh, count and inspect items to ensure conformance to established standards, • Assist in counting, tarping and movement of physical inventory, • Complete requisition forms to order supplies from other departments, • Contribute to team effort by accomplishing related results as needed, • Maintain quality service by following organization standards, • Other duties as assigned What You Bring (Qualifications & Skills): • A high school diploma or GED preferred, • No prior experience is required; on-the-job training provided, • Eager to learn and follow instructions with strong attention to detail, • Ability to work effectively as part of a team in a fast-paced environment, • Basic verbal and written communication skills to report issues and follow directives, • Willingness to adhere to safety protocols and warehouse procedures under supervision Special Requirements: • U.S. Citizen, U.S. Permanent Resident (Green Card holder) or asylee/refugee status as defined by 8 U.S.C. 1324b(a)(3) required., • ITAR requirement

Job Description Experienced CAD Manager needed for well established electrical contractor on Long Island. MTA experience is required. MUST know Microstation. Salary up to $170k including medical/dental/401k match. Oversees a team of CAD designers, ensuring the accurate and efficient creation of electrical schematics and control panel designs using software like AutoCAD Electrical. Key responsibilities include managing staff, setting design standards, providing technical support, training the team, and managing CAD software and libraries. Core responsibilities • Team and project management: Lead and mentor a team of CAD designers, delegate tasks, manage resources, and oversee project workflows to ensure timely and high-quality delivery., • Technical leadership: Provide expert guidance on electrical design projects, particularly in areas like UL508A control panel design and schematics., • CAD standards and quality control: Develop, maintain, and enforce the company's CAD standards and procedures. Review and ensure the quality and accuracy of all CAD outputs., • Software and library management: Manage CAD software, hardware, and symbol libraries. Analyze productivity enhancements and implement necessary customizations., • Training and support: Train internal users on CAD standards and best practices. Provide ongoing technical support and help resolve issues for the design team., • Experience: Minimum of 5-10 years of experience using AutoCAD and/or AutoCAD Electrical, with supervisory or management experience required. MICROSTATION REQUIRED

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $160,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescription: Job Description Northeast Aero is seeking skilled and motivated technicians with a hunger for knowledge and a passion for aviation repair to join our team. We currently have open positions in Pneumatic, Rotating, Fuel, Electro/ Mechanical and Hydraulics. Our ideal candidate is a team player and has a passion for working with their hands, utilizing various tools, materials and specialized testing equipment to test and repair aircraft components in accordance with OEM and/or customer specifications. The technician’s responsibilities will be testing, troubleshooting, tearing down and building aircraft components. All positions require knowledge of our procedures as it pertains to processes and documentation. On the job training and oversight is provided by NEACO management. Essential Responsibilities • Commitment to company values and ethics, • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2+ of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading, and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • The ability to lift up to 50 lbs., • The ability to walk up stairs, • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium components, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • A&P license/certificate is not required (but it is a plus)., • Hourly position commensurate with experience level and skill level and/or certifications. ($24 - $32) Northeast Aero Compressor is an equal opportunity employer. For more information go to our website at Requirements:

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events. Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at . Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionSalary: The Estimator is responsible for managing the electrical estimating process from beginning to end and producing comprehensive bid estimates for commercial construction projects. In this role, you will demonstrate your construction cost estimating techniques and knowledge in quantity takeoffs, as you complete the entire bid from the beginning to the completion of the tender. Key Responsibilities: • Produce accurate estimates of material and labor costs for the electrical element of the project., • Prepare and send out accurate electrical estimates and tender documentation., • Analyze all quotes received for electrical material and labor costs and efficiently utilize negotiation skills to achieve the best value., • Evaluate technical requirements and estimating costs to determine prices and margins of all electrical equipment., • Create estimates/quotations to potential customers - ensuring both the customer and business needs are met, and the forecast in line with requirements., • Work closely with Branch Manager, Subcontractors, Engineers and Development Managers during the estimating/tender process - building stable working relationships., • Utilize estimating software such as Accubid and Bluebeam., • Evaluate bid opportunities and liaise with potential clients, working within project deadlines to produce accurate electrical estimates., • Review and understand all project plans, requirements and specifications., • Review quotes and estimates with Branch Manager and Pre-Construction Manager to prepare recommendations for resolution of any project risks., • Identify and report escalation factors in the marketplace for specific materials and labor rates., • After submittal, actively compare and analyze competitive subcontract and supplier bids., • Ability to substantiate all aspects of final estimates. Qualifications • Proficient in estimating software., • Ability to estimate all types of projects., • Knowledge of standard electrical pricing, • Knowledge of NEC and local codes Requirements: • High School or GED., • 2-4 years work experience (5-10 years Preferred.), • Associates or Bachelor's Degree (Preferred). Work Environment: This job is fully in person, on site. Salary: $100,000 - $120,000 (DOE) Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Tuition reimbursement, • Vision insurance Equal Employment Opportunity HATZEL & BUEHLER provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, HATZEL & BUEHLER complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. HATZEL & BUEHLER expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of HATZEL & BUEHLERs employees to perform their job duties may result in discipline up to and including discharge. Americans with Disabilities Act Applicants as well as employees who are or become disabled must be able to perform the essential job functions either unaided or with reasonable accommodation. The organization shall determine reasonable accommodation on a case-by-case basis in accordance with applicable law.

Job Description Assistant MEP Project Manager The Assistant MEP Project Manager is responsible for supporting the MEP Project Manager in providing consulting services to the Project Teams for MEP Subcontractor Management. They assist with identifying risks and opportunities and collaborate with the teams to mitigate or capitalize on them. The Project Teams handle the daily management of MEP subcontractors and ensure follow-up on action items. Salary $75,000.00-$100,000.00 *Compensation may vary based on factors such as experience and qualifications. Ranges and rates may take into consideration benefits, bonus, and other factors. Please reach out to our human resources director for additional information. Essential Functions: • Manage MEP subcontractors through the development, training, and implementation of processes., • Provide technical support to project teams by educating them on MEP aspects and attending meetings to offer guidance., • Prepare project teams thoroughly for AHJ inspections related to MEP installations., • Promptly communicate risks and opportunities to project stakeholders., • Support comprehensive progress reporting to effectively track project milestones., • Collaborate across Aurora departments to streamline procedures and ensure adherence to internal controls., • Exemplify professionalism by managing relationships and embodying Aurora’s Core Values., • Facilitate seamless MEP coordination processes to enhance overall project success through effective management and support. Appreciated skills: • Skilled in managing MEP subcontractors, training teams, and ensuring compliance., • Proficient in quality control, risk identification, and AHJ inspection preparation., • Experienced in progress reporting, stakeholder communication, and cross-department collaboration., • Strong ability to develop personnel through coaching, delegation, and performance enhancement., • Committed to professionalism, relationship management, and upholding company values. Day in the Life: A day in life of a Assistant MEP PM, I keep projects organized by coordinating with subcontractors, developing processes, and ensuring everything stays on track. My role involves quality control, from reviewing schedules and contracts to auditing RFIs, while also helping teams prepare for inspections and stay on schedule. By focusing on risk management and team support, I help streamline workflows and tackle challenges to keep projects moving forward. Qualifications: • Knowledge of MEP means and methods., • Proficiency in Microsoft Office programs., • MEP technical expertise., • Proficiency in Adobe, and PlanGrid, • Proficiency in AutoCad Preferred Education & Experience: • 2 or more years of related experience Additional Eligibility Qualifications • Strong communication skills; thorough and attentive to details; able to prioritize and multitask; proactive and deadline oriented. Full Time, Exempt: Monday – Friday 8-5pm (Occasional evening and weekend work may be required as job duties demand) Benefits • Health, • Medical/Dental/Vision Insurance Coverage, • Employer funded HRA, • Fitness Incentive Programs, • Employee Assistance Plan (EAP) – including Wellness Programs; Health Advocacy, Legal Assistance, Financial Coaching and Counseling for every employee and members of their household for free., • Discounted services for fertility and family-building benefits offered through Kindbody, • Finances, • Flex Spending Account/Dependent Care Account, • Whole Life Insurance Policy, • 401K plan with employer match, • Wide array of Aflac Insurance plans available, • Survivor benefit insurance, • Free financial planning & credit monitoring services, • Time-Off, • Competitive PTO, • Paid Sabbatical Leave (duration based upon tenure), • 1 week paid for Medical Leave of Absence, • Summer Hours, • Incentives, • Tuition Reimbursement Program, • Employee Referral Program, • Good Times Committee Events (holiday party, happy hours, yoga classes), • Employer match charitable contribution EEO/AAP Statement Aurora Contractors, LLC. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Four years of full-time experience in the electrical trade under a skilled tradesperson which would provide training equivalent to that given in a training, apprenticeship, or equivalent program, or an equivalent combination of experience and training gained by completion of technical courses in the

Four years of full-time experience in the electrical trade under a skilled tradesperson which would provide training equivalent to that given in a training, apprenticeship, or equivalent program, or an equivalent combination of experience and training gained by completion of technical courses in the

Job Description JOB DESCRIPTION Position: Mechanic Day Shift Shift: 08:00 am to 4:30 pm Schedule: Monday through Friday, occasional Saturdays as needed. Reports To: Facilities Manager Employment Status: Full Time FLSA Classification: Hourly- Non/ Exempt Compensation Range: $30.00 -$35.00 (Depending on relevant experience) Not considering external recruiters or third parties at this time Job Summary: Cookies United, a quality driven cookie company based in Islip, NY, is looking to hire an overnight mechanic to have production lines set up for early production. The shift mechanic will troubleshoot equipment problems and perform the required maintenance to ensure smooth mechanical operations. Job Responsibilities: • Assess, adjust, and fix production machinery and equipment., • Adjusts equipment as required in a non-operator’s capacity., • Observe and ensure all equipment performs as required after production has set up lines., • Responds to requests from all departments based on priorities., • Replacement of factory parts and components on our full line of products., • Executes PMs and preventive breakdown as directed by the maintenance manager., • Assesses all mechanical and electrical failures, repairs, breakdowns as needed. Reports all to maintenance manager., • Completes daily shift report to the maintenance manager and the maintenance team., • Mechanical skills and knowledge of mechanical systems., • Troubleshooting skills., • Ability to read and follow manuals, electrical, and mechanical diagrams., • Strong interpersonal and communications skills., • Motivation to become self-sufficient and troubleshooting techniques., • Technician Certifications, • Dexterity and coordination., • Lift and maneuver objects weighing more than 40 lbs., • Ability to work in cold and hot environments., • Walking: move about the entire plant., • Compensation based on experience + Annual Performance Bonus, • Medical, Dental, Vision, Life insurance & Voluntary Benefits (ADD, STD, LTD and FSA), • 9 Paid Holidays, • 2 1/2 weeks (13 days) of vacation for year 1, • 3 weeks (15 days) of vacation for year 2, • Meal/Beverage voucher for your birthday, • Exciting fast-paced entrepreneurial learning environment

Job DescriptionBenefits: • Paid time off Applicant needs to live within a 15-mile radius of Ronkonkoma, NY Description: Seeking a Maintenance Associate to work with a team of other associates in a well-established residential community. This position requires someone who is very "hands on," comfortable in a position of responsibility and able to perform and prioritize a wide range of maintenance tasks. The Maintenance Associate should be friendly and service minded, as this position requires working directly with management, residents, office staff and contractors. Experience: Experience is preferred in a maintenance or construction related trade. Scope of work: includes but is not limited to performing basic construction, carpentry, plumbing, electrical, snow removal, pool maintenance, landscaping, miscellaneous repairs and service requests. Valid driver's license and good driving record required. This position is subject to background check. Hours: Monday - Friday 8:00 a.m. - 4:30 p.m. with flexibility to work outside of scheduled hours as needed (ie: emergencies and snow removal). Benefits: competitive salary, paid holidays, sick days, vacation. Salary: Based on experience and skill level *Please reply with your resume! * Job Type: Full-time

Job Description * Season 2026 * Service Maintenance Technician Your role as a Service Maintenance Technician matters because it delivers excellent customer experience, and you are working as part of a winning team. At our company, every team member plays a crucial role in shaping the future of our business. Your dedication and passion for excellence will not only drive your personal growth but also contribute to our collective success. Together, we create memorable experiences for our customers, foster innovation, and build a supportive and dynamic work environment. Join us and be a part of a team that values your contributions and celebrates your achievements. As a Pool Service Maintenance Technician, you will be responsible for maintaining residential pool facilities by performing routine maintenance, repairs, and water chemistry testing to ensure a hassle-free swimming experience for customers. This role also offers opportunities for professional growth, allowing you to expand your expertise in the pool industry and develop leadership skills through ongoing training and education. Key Responsibilities: • Vacuum pool debris, skim surface, brush pool walls and tiles to remove dirt and algae., • Regularly test pool water for pH levels, chlorine concentrations, and other chemicals, maintaining Langelier Saturation Index (LSI) balance., • Perform preventative maintenance on pumps, filters, and heaters., • Perform minor repairs to equipment, such as damage filters, gaskets, O-rings, leaks in pipes or fittings, adjusting loose components. Lubricating moving parts to ensure smooth operation., • Identify parts needed and place accurate, detailed part requests with office., • Assist with emergency repair situations, • Perform pool start-ups and winterizations, ensuring all procedures are followed correctly to prevent freeze damage on all types of pool equipment. Stay informed on the latest best practices for proper winterization., • Understand safe methods of draining and cleaning pools to prevent pool popping or structural damage., • Inform homeowners and the office of non-compliance safety code issues., • Complete work orders and record all activities, including services done, before/after pictures, and chemical readings and dosages., • Keep the truck organized and stocked, • Experience with plumbing & electrical work preferred., • Basic mechanical skills., • Knowledge of pool water circulation, equipment operation & maintenance, pool chemicals and chemical handling., • Comfortably interacting with clients, as needed., • Dependability, and the ability to adapt to changing demands., • Excellent organizational skills, attention to detail, focus, and accuracy., • Ability to work with a team, follow directions, and complete tasks., • High school diploma or GED certificate, • Valid driver’s license and 3 years minimum driving experience, • Ability to stand, walk, and sit for long periods, • Ability to climb, stoop, kneel, reach, push, pull, and grasp, • Capability to lift moderate to heavy objects, typically around 50 lbs., with occasional requirements to lift up to 75 lbs. Benefits: • Retirement savings plan with employer match., • Paid time off and holidays., • Ongoing training and professional development opportunities.

Job DescriptionDescription: Job Overview For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Tech II for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. Your Responsibilities: • Apply a “Safety First” approach to every day at Heatherwood., • A minimum experience of 2+ years of multifamily residential, commercial, or hotel maintenance, or similar experience., • Maintain the property's interior and exterior standards., • Openness and approachability to feedback and consistent communication, • Understanding and experience with the following mechanical systems, but not limited to: HVAC equipment, plumbing (water heaters, drain clearing, fixture replacement and repair), minor electrical repair, appliance repair, drywall prep and repair, painting, and carpentry., • Knowledge of building systems including fire sprinklers, fire alarms, and central mechanical/HVAC systems, • Solid understanding of general building maintenance, work order management, and apartment make-ready process., • Ability to effectively troubleshoot and problem-solve maintenance issues., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood property teammates., • A positive attitude, • Reliability and dependability, • Team first approach to every day, • Willingness to learn new tasks., • A customer-first approach to providing world-class maintenance and service., • Ability to take direction from a supervisor and work independently through task completion., • Commitment to completion of time-sensitive tasks., • Computer and smartphone skills are required., • Effective written and verbal communication., • Ability to work independently and complete assigned tasks., • Safe understanding of hand/power tools and use of PPE (Personal Protective Equipment), • Flexibility to work overtime and weekends., • Attention to detail and consistently doing the job right the first time., • Heatherwood Safety Culture – monthly team safety training, • CPR certification is required at locations with Level 4 Pool Supervision Requirements, • How your success in maintenance contributes to the community's goals, • How to effectively manage your time and communicate in a fast-paced setting., • Pool and Spa training. Support in obtaining CPO (Certified Pool Operator) certificate., • HVAC training and support in obtaining HVAC Universal License., • Ongoing maintenance training and development and internal company growth opportunities.

Job DescriptionDescription: Position Summary Are you a skilled mechanic or technician looking for an exciting opportunity in the pharmaceutical industry? Join our team and play a key role in keeping our state-of-the-art manufacturing and packaging equipment running at peak performance. You’ll work hands-on with advanced machinery, help maintain facility upgrades, and be part of a collaborative team that produces critical healthcare products. Job Type: Full-Time Location: Hauppauge, NY Works Hours: Monday – Friday, 8:00AM – 4:30PM; 4:30PM - 1:00AM Pay Range: $24.00 - $40.00 per hour, depending on experience and shift Start Date: ASAP What Makes This Role Exciting • Work on high-tech, industrial-level equipment in a regulated pharmaceutical environment., • Be part of a team that produces products impacting consumer health and well-being., • Opportunity to troubleshoot and solve complex mechanical and electrical challenges., • Hands-on experience with cutting-edge machinery and automation systems. At CPC, you’ll be part of a team that has set the standard in pharmaceutical development and contract manufacturing since 1971, helping bring high-quality OTC, dietary supplement, and prescription products to market faster and safer than ever. We pride ourselves on quality as a core value, innovative problem-solving, and a collaborative culture where everyone plays a role in advancing formulation and manufacturing excellence. CPC offers an inclusive, respectful workplace with opportunities to grow your skills and career while working with cutting-edge technologies and serving leading global brands. With a commitment to employee success, competitive benefits, and a culture built on teamwork and integrity, CPC is a place where your contributions truly make an impact. Requirements: Responsibilities In this role, you will: • Perform repairs, overhauls, and preventive maintenance on manufacturing and packaging equipment with minimal supervision., • Troubleshoot and diagnose mechanical and electrical issues efficiently., • Respond to emergency or unscheduled repairs to keep production running smoothly., • Maintain and upgrade facility equipment as required., • Safely use a variety of hand and power tools., • Document maintenance work and maintain equipment for optimal performance., • Assist in compiling operating instructions or standard procedures for equipment., • High school diploma or GED required; trade school or college coursework preferred., • Minimum 2 years of hands-on experience with MIG/TIG welding, mills, turning machinery, or other industrial equipment., • Ability to read and interpret electrical schematics and mechanical diagrams., • Familiarity with PLCs (Programmable Logic Controllers) and VFDs (Variable Frequency Drives)., • Strong attention to detail and commitment to quality., • Ability to work independently or as part of a team., • Knowledge of company SOPs, GMPs, and safety guidelines., • Understanding of industrial production systems and machinery operations.

Job DescriptionDescription: For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality constructions, striking designs, and providing exemplary service, makes us one of the most highly regarded leaders in the industry. Additionally, we offer a competitive benefits package including health & dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Lead Technician for Heatherwood, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. Responsibilities and Duties • Apply a “Safety First” approach to every day at Heatherwood., • Maintain the properties’ interior and exterior standards., • Openness and approachability to feedback and consistent communication with your team and management., • Advanced understanding and experience with the following mechanical systems, but not limited to: several types of HVAC equipment, plumbing (boilers, water heaters, drain clearing, fixture replacement), electrical repair and troubleshooting, appliance repair, painting, and carpentry., • Ability to use multiple building and property management applications and software including or similar functionality to; Yardi, Suite Spot, Microsoft Outlook, Word, and Excel., • Ability to assume the responsibilities of the Maintenance Manager in their absence., • Train and develop Maintenance Technicians on both technical and administrative skill sets to support growth., • Ensure Heatherwood’s standards and core values are consistently met., • Ability to effectively troubleshoot and problem-solve maintenance issues in a fast-paced setting., • Supporting the performance management of all maintenance associates., • Shared responsibility of “On-Call” schedule with your property and other Heatherwood properties., • Ability to learn or oversee a Sewer Treatment Plant and Swimming Pools where applicable., • Job responsibility requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, kneeling, stooping, crawling, and climbing. This list is an example of the Lead Technician's responsibilities but is not an all-inclusive list of job descriptions. Business needs will dictate additional responsibilities. Requirements: What You Bring to Heatherwood • A positive attitude., • Team first approach to every day., • A history of being a proven peer leader., • A minimum experience of 3+ years in a supervisory role in multifamily residential, commercial, or hotel maintenance, or similar field experience., • A proven track record of managing maintenance associates., • Operate with professionalism and integrity., • A customer-first approach to providing world class maintenance and service., • Ability to work directly with the Maintenance Manager to drive effective day-to-day operations of the maintenance operations at the community., • Strong time management routines and timely task execution of workload., • Vendor management experience includes communicating schedules, providing materials, project execution, and vendor accountability., • Advanced understanding of computer and smartphone skills., • Experience in managing a work order system, purchasing, and understanding a budget., • Balance between field and administrative workload., • Safe understanding of hand/power tools/mechanical systems and use of PPE (Personal Protective Equipment)., • Attention to detail and consistently doing the job right the first time., • Universal HVAC Refrigerant Certificate and CPO Certificate., • Valid driver’s license. Your Development • Heatherwood Safety Culture – monthly team safety training., • How your success in maintenance contributes to the communities’ goals., • How to effectively manage your time and communicate in a fast-paced setting., • Support in obtaining CPO (Certified Pool Operator) certificate if required., • HVAC training and support in obtaining HVAC Universal License., • Attention to detail and supporting Heatherwood’s maintenance standards., • Ongoing maintenance training and development and internal company growth opportunities.

Job Description Looking for a career where you can make a difference in someone else’s life? Where opportunities abound to advance your future, both personally and professionally? The Bristal Assisted Living is the place for you. You’ll thrive in a premier senior care organization that values you as an individual — not just your experience and skillsets, but your unique talents and energy. You’ll enrich the community in which you work, and that community will enrich you. We call what we do at The Bristal “hospitality with a higher purpose.” We know you’ll make an impactful difference. Because the difference is you. Come join us! We are seeking a talented Maintenance Assistant to assist with property maintenance and repairs of our luxury assisted living community. In this role, you will be responsible for all aspects of property maintenance, including plumbing, carpentry, electrical, painting, furniture assembly, snow removal, equipment repair, preventative maintenance. Having HVAC experience is considered a plus. At times, you may come into contact with residents, resident families, other guests and team members, and we expect you to maintain a friendly, courteous and positive attitude at all times, so that these encounters are pleasant and professional. The care, attention to detail and superior customer service you bring to your maintenance responsibilities are fundamental to the quality of life and the general wellbeing of our residents every day. The ideal candidate will have the following skills/ qualifications: • Previous maintenance/repair experience and skilled in one or many of the areas noted above • Experience working in a hotel, apartment complex, residential community, assisted living community or skilled nursing facility is a plus, • Ability to work independently as well as part of a team, • Kind, patient and compassionate demeanor when encountering residents, management, family members and guests, • Ability to multi-task, prioritize workloads and juggle many hats at the same time, • Must have a stable work history and solid references, • A minimum of a high school diploma is required, but some college or advanced training is preferred

Job Description Core Responsibilities: -Inspect, repair, and maintain electrical systems, including wiring, panels, switches, outlets, lighting fixtures, generators, UPS, PDUs, primary switchgear, and emergency backup systems. -Diagnose and resolve issues such as power outages, faults, short circuits, and malfunctioning equipment; perform necessary troubleshooting, testing, and repairs. -Install or modify electrical systems and components during renovations and upgrades. -Conduct preventive maintenance, testing (e.g., grounding, insulation), and record-keeping per schedules, manufacturer guidelines, and NEC standards. -Ensure compliance with electrical/building codes, NFPA, OSHA, and safety standards; inspect emergency lighting, fire alarm interfaces, and life safety systems. -Log work orders, track metrics, and report on activities using department software. -Collaborate with team members and contractors; provide technical support and supervise electrical contractor work as needed. -Perform minor related trade tasks (e.g., demolition, patching, painting, cleanup) to complete electrical assignments. -Attend at least 2-3 professional training sessions annually, including IUOE Local 30 courses. -All other duties as assigned. • Proficient in electrical safety procedures (NFPA 70E and OSHA), • Must have at least 4 years of commercial/industrial experience in the electrical trade., • Ensure all work complies with NEC standards and local building codes., • Shows the ability to work with and around High Voltage up to 13.2 KVA, • Install, maintain, adjust, operate, test and repair branch circuits, power distribution wiring, electrical equipment, fixtures, lighting systems, and conduit in compliance with the National Electric Code (NEC)., • Lead and supervise electrical installations on construction sites, including commercial and industrial projects, • Experience with 208V three-phase , 208V single-phase , 120/240V , 208/240V, 480 Volt 3 phase circuitry ., • Availability – available for emergency calls 24hrs 7 days per week ., • Proficiency in NEC code, designing, installing, and maintaining electrical systems., • Strong problem-solving/troubleshooting, deep mechanical and electrical knowledge, excellent customer service/communication, attention to detail, and time management, • Read and interpret blueprints, schematics, and technical drawings to determine the layout of Electrical systems.

Job DescriptionField Repair TechnicianJob Description Vacuum Instruments Corporation LLC located in Ronkonkoma NY is a designer and manufacturer of Leak Detection Equipment. Job Description- Field Service Technician We have a position available to provide technical repair service to our customer base within the USA as well as in house equipment repair. Salary starts at $26.00/hour, commensurate upon experience Job Responsibilities include: • Travel within the USA, • Inhouse customer support during non-traveling periods, • Installation of New Equipment, • Diagnostic & Repair, • Preventive Maintenance, • Customer Training, • Technical support via email & phone, • Technical School or 2-3 years’ experience or min of High School Diploma, • Electrical and mechanical experience preferred however we will train the right candidate, • Voltage meter operation, • Self-starter, • Dependable, • Speaks English with Spanish as a plus, • Maintain the legal right to work in the United States, • Vehicle, • Full Time Position, • Paid Overtime, • Paid Travel Time, • Medical, • 401K, • Paid Vacation Time, • Paid Sick Time, • Vehicle Mileage reimbursement at current government rate, • Paid factory training Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Work Location: In person

Job DescriptionElectro Freeze Tri-State, a proud Distributor of Electro Freeze specialty soft serve, milkshake, batch freezers and frozen beverage machines, is a family owned company celebrating our 60th year in business. We are seeking to expand with a career focused person to repair, prep and recondition our equipment. Experienced and qualified individuals are encouraged to apply and join our team. Responsibilities and Duties Field service for repairs, reconditioning and preparation of Electro Freeze Refrigeration Equipment. Qualifications and Skills • Valid Driver's License and a 3 year clean driving record required., • Must pass any/all drug or background screenings., • Minimum of 2 years experience in refrigeration and or electrical service, • Experience in low temperature refrigeration, as well as working knowledge of mechanical and digital control circuits is highly desirable., • Must have EPA certification, • Diligence to submit accurate, timely, and legible paperworkBenefits, • Year round employment, • Training and factory authorization, • Medical, dental and vision insurance, • 401K with company match, • Paid holidays and vacation time available as accrued., • Job Type: Full-time

Job Description Job Posting Title Entry-Level Repair Technician (In-House Manufacturing) Job Description Vacuum Instruments Corporation LLC located in Ronkonkoma, NY, is a designer and manufacturer of Leak Detection Equipment. Job Description - Entry-Level Repair Technician Internship - Manufacturing (In-House) Vacuum Instruments Corporation has an opening for an Entry-Level Repair Technician Internship. We are seeking a self-starter with limited experience with a great work ethic and willingness to learn our product line and develop into a Service/Repair Technician in the future. The Entry-Level Service Technician Intern will perform various activities, in support of the standard leak detection systems, leak detectors and gas processing equipment that VIC designs and manufactures. We are seeking a self-starter committed to delivering a high level of customer satisfaction, maximizes customer retention, and increases profitability. The candidate will be based in our Corporate Office in Ronkonkoma, NY. Essential Duties and Responsibilities: Provide Entry-Level Internship Support in the following areas: • · Provide service and customer support., • · Support installations, repairs, maintenance, and test tasks., • · Diagnose technical problems and determine proper solutions., • · Perform preventative maintenance and repairs., • · Produce timely and detailed service reports., • · Document processes., • · Follow all company procedures and protocols., • · Communicate with technical team regarding open issues., • · Comprehend customer requirements and make appropriate recommendations/briefings., • · Build positive relationships with customers., • · Basic Mechanical and Electrical experience., • · Some level of college/university education., • · Clean DMV, • · Be based in Long Island., • · Maintain the legal right to work in the United States.

Job DescriptionDescription: Maxxima is seeking a skilled and detail-oriented Engineering Lab Technician full-time to support our engineering team in testing, troubleshooting, and maintaining products and equipment. This role plays a key part in supporting product development and ensuring products meet quality, safety, and performance standards. The ideal candidate enjoys hands-on technical work, thrives in a lab environment, and works well in a collaborative, fast-paced setting. Key Responsibilities: • Conduct tests and inspections on products and equipment to ensure compliance with quality control and safety standards, • Troubleshoot, repair, and rework defective products and equipment, including soldering when required, • Assist engineers with the development, testing, and improvement of new and existing products, including small-batch assembly, • Operate lab equipment to test products according to engineering specifications, • Maintain detailed and accurate records of tests, inspections, and repairs, • Maintain organization and cleanliness of the engineering lab and equipment, • Provide technical support to other departments as needed, • Associate degree in Electronics, Electrical Engineering Technology, or a related field (or equivalent experience), • 2+ years of experience in a technical or engineering lab role involving testing and repair of electronic products, • Proficiency using tools and equipment for testing and repairing products, • Strong analytical, problem-solving, and documentation skills with high attention to detail, • Effective communication skills and ability to work collaboratively across teams, • Proficiency in Microsoft Office and other relevant software applications, • Familiarity with analog and digital circuits preferred, • Strong attention to detail and commitment to quality, with the ability to follow ISO 9001 quality procedures, • Friendly, collaborative, and team-oriented work environment, • Paid time off, plus a volunteer day with a nonprofit partner, • Highly subsidized medical coverage with concierge service access, • Group voluntary benefits to include dental, vision, and voluntary life, • Long- and short-term disability, • Company sponsored basic life insurance benefit, • 401(k) with company match and profit-sharing eligibility, • Pet & Legal Insurance, • Company sponsored events, • Employee discounts on Maxxima products Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination. Requirements:

Job Description Installation & Customer Support Specialist $30/hour + Paid Vacation + Performance Bonus Hauppauge, NY | Field + In-House | Full-Time Be the Person Our Customers Rely On We operate in one of the most creative industries in the world — custom apparel and print production. Our customers are artists, entrepreneurs, clothing brands, and production shops who depend on their equipment to run their businesses every single day. When their printer is down, their business is down. That’s where you come in. We’re looking for a hands-on, customer-focused Printer Technician / Wide Format Technician who takes pride in solving problems, restoring momentum, and becoming the trusted expert our customers count on. This isn’t just a repair job. It’s a chance to be the hero. Who We Are For over 15 years, we’ve been supplying equipment, supplies and support to the custom apparel and print industry — and we’re growing fast. We’re a tight-knit team of 11 creative professionals selling creative tools to creative companies. We specialize in equipment and supplies used in Wide Format Printing, UV Printing, Direct to Garment (DTG), Direct to Film (DTF), Transfer Printing, Embroidery, and more. We’ve built our reputation on expertise, responsiveness, and real customer relationships — and that growth is accelerating. We’re customer-obsessed. We move fast. We work as a team. And we’re building something special. If you want to be part of a growing company — not just another employee in a massive corporation — this is your opportunity. What You’ll Be Doing This role blends technical skill, field service, installation, and customer support. You will: * Install and configure wide format printers, DTG/DTF systems, and related equipment * Perform on-site and in-house diagnostics and repairs * Troubleshoot mechanical, electrical, and software-related issues * Guide customers through technical solutions over phone and email * Train customers during installation so they feel confident operating their equipment * Work closely with our support and sales team to ensure a seamless customer experience * Visit customer locations for installs and service You’ll spend time both in our Hauppauge office and in the field. This Role Is For You If: * You enjoy working with your hands and solving mechanical problems * You’re comfortable with computers, drivers, software installs, and file management * You like talking to customers and explaining solutions clearly * You stay calm under pressure * You take ownership of problems until they’re fully resolved * You enjoy being part of a tight-knit, collaborative team * You want to grow with a company, not just collect a paycheck Technical Background We’re Looking For * 2+ years experience in a technical support, repair, or field technician role * Experience working with printers, electronics, mechanical equipment, or similar hardware * Comfort with Windows OS, software installs, and networking basics * Ability to read manuals, follow procedures, and document work clearly Strongly Preferred (but not required): * Wide format printer experience * DTG, DTF, screen printing, or embroidery background * Familiarity with Photoshop, Illustrator, or Corel * Understanding of RIP software and print workflows If you’re mechanically inclined and quick to learn, we’re willing to train the right person. Why This Role Is Different This is a customer-centric business. Our customers rely on us to operate their companies. That means: * You’ll build real relationships * Your work directly impacts small businesses and entrepreneurs * You’ll see the results of your expertise immediately * You’ll have real responsibility and real autonomy We’re not looking for “just a technician.” We’re looking for someone who takes pride in being indispensable. Compensation & Benefits * $30 per hour starting pay * Paid vacation * Performance-based bonus structure * Ongoing technical training * Growth opportunities within a fast-growing company * Relaxed, team-first environment * Direct access to leadership * Real input into company direction Our Culture We’re a relaxed but high-performing team. No corporate red tape. No politics. No micromanagement. We collaborate. We support each other. We move fast. And we care deeply about our customers. After 15 years in this industry, we know where it’s going — and we’re expanding with it. If you want to help creative businesses thrive while building your own long-term career in a growing company, this is your chance. Company DescriptionGPI Supplies is all about work life balance! Check out our site: Supplies is all about work life balance!\r\n\r\nCheck out our site:

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job Description Our Family Broadway National, one of Inc. 5000’s fastest growing privately owned companies, provides national and international Property Management services to high profile clientele throughout a wide range of businesses. Such businesses include Tech, Restaurant, Super Market, Facility Maintenance, Retail, Specialty and more. Job Responsibilities • Maintain exterior office appearance and safety (sweeping, removal of all debris, light snow removal as needed, salting walkways as needed…etc.), • Maintain the interior office appearance and safety through general upkeep and cleanliness. (sweeps, vacuums, mops, and garbage disposal), • Performs large variety of minor or occasional “handyman” jobs (does not perform at full level of carpentry, electrical and plumbing crafts)., • Restocking office and kitchen supplies as needed, • Assist with deliveries/shipments, • Associates degree preferred, however equivalent combination of education and experience will be considered, • Strong verbal and written communication skills, • Pro-active, organized & detail oriented, • Ability to multi-task in a fast paced environment, • Ability to sit, stand, bend, stoop and bend for periods of time (depending on work to be done), • Medical, Dental and Vision, • Company paid Group Term Life Insurance, • 401 (k) Retirement savings plan (company match), • Paid vacation, sick/personal time and floating holidays We aim to provide our employees with a family-oriented atmosphere, where they are encouraged and motivated in a comfortable setting, while still being given the proper tools to grow within the company. As we experience rapid growth each year, we strive to assure our employees grow with us. Our company welcomes both those who have industry experience and those who are interested in learning about the facility maintenance business. We offer extensive training to new hires, providing them with the skill set needed to succeed. Our goal is to not only to provide exceptional customer service to our clients, but also to create an environment where employees flourish. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionCompensation: • $21.00 - $30.00/hour, • Paid OEM Training, • Paid Travel, • Comprehensive benefits including medical, dental, vision available from start, • Paid Time Off, Sick Time and Vacation, • Matching 401(k) etc., • Company credit card + travel perks/points, • Per-diem Shift: • Day shift, Monday to Friday with ample overtime + occasional on-call. MasterTech is on the search for entry-level Industrial Technicians based near an International Airport, requiring extensive travel to customer locations. Field Service Techs will be responsible for the on-site installation and support of mechanical and electrical components and systems, ensuring the machinery is properly installed and operational. Detail-oriented Field Service Techs are responsible for the on-site maintenance, diagnostics, and repair of machinery along with reporting issues and completing documentation. Key Qualifications: • Previous printing, corrugated, prepress, postpress, flexo presses, folding and other printing/boxing equipment is extremely beneficial., • Experience in industrial, manufacturing, and/or any kind of mechanical maintenance is preferred., • Experience with electrical systems is a definite asset; AC & DC as well as three-phase wiring., • Knowledge of SPS Programming, automation technology and drive technologies., • Ability to conduct installation, diagnostics, troubleshooting, programming, repairs and provide recommendations., • Maintain up-to-date training while providing remote support., • Excellent customer service skills and communication., • Exceptional problem solving, troubleshooting, diagnosis and documentation. MT1

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process Pay: $20.00+ per hour Benefits: • Dental insurance, • Health insurance, • Paid time off Schedule: • Day shift

Job Description Job description Nissan of Smithtown is one of the region's top rated customer satisfaction dealerships, as well as being the largest Nissan store on Long Island. Our team provides training courses and offers opportunities for advancement, which focuses to help you grow both personally and professionally. We are growing at the fastest rate of any Nissan dealer in the area and looking for the right people to grow with. What We're Looking For We are looking for A, B, C and Express Technicians to continue our growth and provide our customers with exceptional service. Build your career and develop your professional experience with our team. The ideal candidate will flourish in a fast-paced and professional workplace. Don't believe just my ad, come and talk to the techs in the shop! What We Offer • Highly productive shop ( techs collectively averaging over 60hrs each with some in the 80-90 range regularly), • Continued education and manufacturer training, • Clean and professional work environment, • Health insurance, • Perform work specified on the repair order with efficiency and in accordance with dealership - familiarizing yourself with the service department & procedures, • Assist Service Advisor in test-driving vehicles, and testing components and systems. You will learn how to use diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs, • Minimum of 1 year in service department, • Technical degree preferred, • ASE certifications preferred, • High School Diploma or GED, • Ability to identify the problem quickly, • Effective analytical and communication skills, • Good reading, computer, and mathematics skills, • Ability to learn new technology and repair and service procedures and specifications, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Basic Computer Skills

Job Description General Summary: The Technician is responsible for all aspects of installation, maintenance and repair of commercial audio and visual systems, including installing and servicing audio, video, commercial sound systems, and drive-thru equipment. A Tech should possess good customer service skills, an attention to detail and the ability to multi task. In addition, the Technician must be able to take on tasks with very little supervision, exercise independent judgment in performing such tasks and complete them in a quick and efficient manner. Excellent in person and remote communication skills are a must. The Tech must be willing and able to drive a van and maintain a driving record that meets the company’s insurability criteria. The service area for this role is in and around all of the following boroughs: Brooklyn, Queens, Bronx and Manhatten- Westchester and Rockland counties, as well. Essential Job Functions and Responsibilities: • Physically installing, servicing, maintaining and troubleshooting all types of commercial, audio, video and satellite systems, and drive-thru technology at client works sites. Responsibilities include working indoors and outdoors; working at heights, getting tools and equipment to/from and working on/in rooftops, ceilings, crawl spaces and other tight or difficult spaces using ladders and other devices; and testing/diagnosing systems to insure all is in proper working order; all in accordance with company safety requirements., • Diagnosing sound equipment imbalances by listening for audio defects., • Reviewing client history on company database to insure the appropriate tools, AV equipment and systems are available upon reaching the job site(s) and adding to client history notes and all related updates based on work performed., • Applying technical knowledge of electronics and networking principles in determining equipment and cabling placement as well as diagnosing malfunctions and applies such skills in installing or restoring equipment operations., • Resolving system problems for clients in a timely, efficient and professional manner., • Advising clients of system or equipment upgrades and enhancements based on his/her technical and product knowledge., • Participating in training provided by the company or through the company as required and obtaining/maintaining licenses and/or certifications as required by local or state mandates to perform company work., • Completing notes, paperwork, timekeeping and other clerical aspects related to the job in a timely and accurate manner., • Performing visual and manual Safe Job Performance Assessments prior to performing work at client sites, adhering to safety rules and processes while performing work., • Maintaining, using and operating company vehicles and equipment in a safe and secure manner, advising management of any problems with the vehicle or other equipment immediately to facilitate repair and adhering to company policy with regard to such equipment and driving practices. This may involve long periods of driving to client locations., • Physically maintaining a clean, organized kiosk; which includes stocking shelves and stacking equipment; breakdown packaging and disposing of such, packaging items for shipment and conducting inventory counts. High School plus 1 year of other specialized schooling Equivalent Experience: Technical High School diploma in electrical program plus 2 years wiring and cabling experience Level of experience required: 1 year to 3 years Required certification or licenses: • Valid drivers’ license, • MN – Power Limited Technicians License, • Portland – Oregon Low Voltage License, • MA – Rhode Island Low Voltage Contractors License, • CT – CT Low Voltage Contractors License, • WA – WA – ELO6, • CTS preferred, • Ability to troubleshoot and problem solve, • Ability to make decisions with little oversight, • Good customer service skills with the ability to positively represent the company at client locations, • Good communication skills both written and verbal, • Basic understanding of NEC codes for installation of communication cable, • Ability to operate a multimeter and impedance meter, • Able to use the company issued laptop and mobile devices for work purposes

Job Description Kia Retailers are offering skilled and experienced military Veterans with the opportunity to begin an inspiring career as a Kia Certified Service Technician. To support this Kia Retailer initiative, Kia America, Inc. has established the Kia Veterans Technician Apprenticeship Program (VTAP). Job Description • Diagnose, maintain, and repair Kia vehicles including engine, transmission, steering, suspension, brakes, HVAC, and electrical components, • Complete repair orders and warranty request orders in accordance with established Kia and Retailer policies and procedures, • Test drive vehicles, and analyze, diagnose, and repair components and systems using Kia diagnostic strategies, special equipment, and tools KUS and ERS make no warranties (expressed or implied) or guarantees of employment to any individual seeking to participate in the Kia Veteran Technician Apprenticeship Program (VTAP). All employment decisions are at the discretion of the specific Kia Retailer to which an employment application is made, conditional upon meeting eligibility, skill, and experience requirements to participate in VTAP. Requirements Qualifications • Honorable Discharge, • Valid Drivers License from any state with a clean driving record, • Experience in a technical / mechanical field is required Kia VTAP Apprenticeship Highlights: • Full-time employment with a participating Kia Retailer, • A program designed specifically for Veterans facilitated by Veterans!, • Participation in a one-year competency-based GI Bill approved apprenticeship leading to Kia Service Technician certification, • Access to all tools, equipment, vehicles, and training needed to complete the apprenticeship and certification process, • Eligible Veterans may apply for and receive a substantial GI Bill© Monthly Housing Allowance (MHA) during their apprenticeship

Job DescriptionTruck (B) Mechanic - Full-time / Part-time (Flexible Hours) Fab-Tex, a busy medium/ heavy duty truck upfitter/dealer located in western Suffolk, NY, is expanding its service team. We are currently looking to hire a Truck Mechanic who is willing to grow with our company. Responsibilities: • Perform required inspections and preventive maintenance on vehicles and equipment, including tractors, trailers, light-duty vehicles, dump trucks, and more., • Complete vehicle inspection report write-ups timely and efficiently., • Diagnose the cause of any malfunction and perform repairs to correct specifications including, but not limited to, engines, transmissions and suspension, fuel and ignition system, and exhaust, intake, electrical, mechanical, brake, and HVAC systems., • Problem solve/ quality check while following procedures including documenting all work performed on work orders., • Diesel engine repair: 2 years (preferred), • Mechanical knowledge: 2 years (preferred), • The mechanic must provide own tools necessary to perform maintenance, repair and diagnostics., • Maintain a high level of professionalism, motivation, focus, and organization., • Current and valid drivers license (CDL preferred, but not mandatory)., • Must have great communication skills within a team environment., • The employee is required to stand, walk, grasp tools, hear, balance, stoop, kneel, crouch, sit for an extended time period, lift/ move up to 25 lbs, and have good vision. Job Type: Full Time or Part time Salary based on experience: $30-$45.00 per hour Schedule: • Monday-Friday, • Flexible Hours, • Full-time Day Shift: Mon-Fri 7am- 5:30pm, • Part-time: 3-5 days, Flexible hours (Day or Night), • Overtime available, on average 10 hours a week overtime, • Weekend availabilityWork location: one location Affirmative action statement: Fab-Tex and its subsidiaries are equal opportunity employers and do not discriminate against applicants or employees in hiring, job assignments, probation, discharge, or other conditions of employment on the basis of an individuals race, sex, ethnicity, age, disability, marital status, sexual orientation, religion, national origin, citizenship status or arrest record. Fab-Tex also strictly prohibits sexual harassment in the workplace.

Job Description Job Description & Responsibilities The Team Leader plays a crucial role in managing the operations of a Gregorys location. This individual is responsible for ensuring our standards of quality, service, and cleanliness are upheld every hour of every day. The General Assistant Store Leader will be the leader in charge when a Store Leader or Multi-Unit Leader is not present. The Team Leader will work a flexible schedule in conjunction with the other leaders to fully cover the needs of the business during all operating hours. This role will oversee and manage the following: * People Development * Ensure new hires/transfers are onboarded properly to the store and thoroughly acclimated in operational, service, and knowledge functions * Ensure teams are upholding our high standards, leading by example and educating each member of the team * Identify and work with high potential baristas that can be developed into our next great leaders * Operational Standards * Ensure all existing and new operational standards are being executed as prescribed * Assist with training teams on new menu and operational roll outs and ensure proper follow ups are held * Ensure all stores are upholding Department of Health standards and are always well prepared to handle an inspection at any time * Ensure quality standards are met by checking for taste, FIFO rotation, and visual appeal * Ensure stores are kept immaculately clean, organized, and well merchandised at all times * Service Standards * Work side by side with teams to lead by example in 5-star service * Coach teams to have a guest-first mentality at all times regardless of side-duty tasks that need to be completed * Proactively manage customer concerns/issues and coach teams on how to do the same * Become the “Mayor” of your store group and know a significant amount of customers on a first name basis that come into your store * Collect customer business cards/email addresses to build a database that you can promote grass-roots marketing efforts towards to drive loyal business * Minimize guest complaints and work with your SL/Multi-Unit to respond to all Yelp/Google/App/Email comments and go above and beyond for both positive and negative reviews * Facilities & Maintenance * Proactively clean, service, and maintain all equipment and fixtures in your stores * Hold monthly meetings with clear direction for deep cleaning tasks to be accomplished * Quickly react to any major plumbing, electrical, HVAC, equipment, or other facility concerns that can severely impact business * HR Management * Ensure you and your team are compliant with employee labor laws * Ensure changes to labor laws are thoroughly communicated with your teams * Proactively manage employee issues by having regular conversations with every employee on your team, ensuring they have been heard, and working with your SL/Multi-Unit to manage concerns * When necessary, work with your SL/Multi-Unit to deliver coaching conversations, warnings, and terminations with sufficient evidence and documentation that protects the business and the employee’s experience * Financial Performance * Closely manage each of your store’s controllable profit areas: sales, labor, and COGS * Work closely with your team and SL/Multi-Unit to build customer relationships and seek out revenue drivers outside of the 4-walls of the store * Work closely with your team to build an efficient schedule based on the needs of the business, using sales data to drive your decisions * Manage weekly payroll reconciliation ensuring hours and tip distribution are 100% accurate * Manage cash handling responsibilities including cash drawer counts, safe reconciliation, and bank deposits * Actively track inventory/waste levels and ordering activity to ensure your location has sufficient product for service without exceeding COGS targets * Ensure monthly inventory counts are completed and submitted accurately Additional Expectations * This is a hands-on role and a General Assistant Store Leader is expected to work alongside their teams to drive revenue, efficiency, and profitability. Setting and leading by example is what will drive your success * There is no set schedule for this role. A General Assistant Store Leader is expected to be flexible in their stores based on the needs of the business and the development of their people. This includes schedules of early mornings, nights, weekends, and holidays. * Regular communication with your SL/Multi-Unit is expected to keep him/her aware of the state of your businesses and the proactive solutions you are providing * Actively embody our company values and live them every day. * Attend company events and proactively encourage team members to attend as wellGregorys Coffee is a family-run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you.Gregorys Coffee is a family run company that puts people first. Joining our team means joining a community of baristas whose aim is to provide an amazing guest experience for anyone who walks through our doors. If you are interested in being part of a company that is focused on making everyday special for our guests and our team, Gregorys is the company for you. We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Help or transport service, • Paid time off, • Parental leave, • Training & development, • Vision insurance VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs Test units, integration of firmware and GUI (Graphical User Interface) changes Maintain Software Version Control (SVN) and release management systems Provide documentation for third party integration into the firmware and customer support to debug software issues Program Data Acquisition based GUIs using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols Work with cross-functional team to design and develop new products and improve existing designs Follow all VJX and OSHA workplace safety requirements and policies Safety Sensitive Position Essential Skills Bachelors Degree in Electrical and/or Computer Engineering Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers Demonstrated ability to write firmware for industrial control equipment • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional ICs, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills Physical & Mental Demands: Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and/or by air. Overnight stays may also be required.On a regular basis, will be required to:, • use written and oral communication skills, • read and interpret data, information and documents, • be creative, make judgements, use reasoning and make decisions, • observe and interpret situations, • learn and apply new information or skills, • perform detailed work on multiple, concurrent tasks, • work under intensive deadlines with frequent interruptions, • interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.