Trabajos general construction en Clifton, New JerseyCrear alertas

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Service Technician to join our team. The HVAC Service Technician will support the HVAC department by preforming preventative, corrective, and predictive maintenance, troubleshooting and service of commercial and industrial HVAC systems. HVAC Technician performs tests and analysis of data to assure the proper functioning of equipment and provides recommendations as appropriate. Essential Functions • Perform maintenance and service repairs, install new units or replace parts for existing units according to specifications., • Perform preventative maintenance and repair of commercial HVAC equipment as needed., • Inspect equipment and perform diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks., • Communicate with dispatch to ensure completion of scheduled job., • Responsible for delivery and removal of parts and equipment needed to complete service work., • Generate work orders that address deficiencies in need of correction., • Adhere to safety standards and protocols while performing all job duties., • Uses and maintains appropriate personal protective equipment (PPE) as prescribed by the company.Education, Qualities & Skills Required, • High school diploma or equivalent, • Must have OSHA 10 or 30, • 5 years of HVAC maintenance and repair experience., • Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories., • Effective communication skills to communicate with customers and resolve customer issues, complaints, or concerns., • Be familiar with a wide range of equipment and troubleshooting techniques., • Ability to show up to work on time and commitment to performing high quality work, • Valid NJ Driver’s License with a clean driving record.Compensation $20 - $25 Hourly depending on experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR IkFCsSByyn

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a HVAC Helper to join our team. The HVAC Helper will support the HVAC department by preforming Plumbing and HVAC work and assisting Plumbing / HVAC mechanics with daily tasks and projects Essential Functions • Assist with the Installation, repair and maintenance of all plumbing systems including but not limited to drainage, waste, vent, gas and flue piping, fixtures, faucets, tub & shower valves and water heaters., • Assist with the Installation, repair and maintenance of all HVAC systems including but not limited to hydronic boilers, steam boilers, hot air furnaces, air conditioning systems, piping, controls and ductwork., • Keep the mechanics vehicle organized, stocked with material and clean., • Review and complete assigned training curriculum., • Have hand tools as required by the company., • Wear PPE as established by the company guidelines, • Any other tasks as assigned managerEducation, Qualities & Skills required, • Must have a OSHA 10 or 30, • Organizational and multitasking abilities, • Active listener with excellent communication skills, • Sound judgment and critical thinking, • Professional behavior and conduct, • Must be able to work well individually and with a team.Compensation Starts at $17 Hourly with no experience Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position, Monday – Friday 7:00 am – 3:30 pm and Saturdays as needed per job. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR Axof5ZUwGq

Job Description PLEASE READ JOB DESCRIPTION & DUTIES CAREFULLY BEFORE APPLYING This is a seasonal position (October thru January). We'll work with your schedule if needed. Hours: Mornings and Afternoons Mon-Fri with option to work Saturdays and Sundays We are looking to hire crews ASAP! Awesome ownership, great hours, flexible and competitive pay. Job Description: Install outdoor holiday lighting on residential and commercial properties. This also includes taking down lights in January and any service calls, as necessary. Duties and Responsibilities: • Must be comfortable and safe while working on ladders (in all weather conditions), • Must be comfortable working outside all day and in all weather conditions, • Must be comfortable working on houses and different types of roof tops, • Must be willing and able to perform manual labor up to 8 - 12 hours per day, • Maintain excellent customer service skills, • Ability to lift between 50 - 100lbs, • Hands on training will be provided Job Qualifications: • High School Diploma/GED, • 1 year of general labor or construction preferred, • Reliable transportation to and from our warehouse in West Orange, NJ Other Information: Decorate With Lights of North Central NJ is a seasonal operation, owned and managed by Dan Smith of Mosquito Shield of North Central NJ. There will be opportunities in the 2022 season (April - October) for Mosquito Shield technicians as well. • For more info about Decorate With Lights of North Central NJ, click here., • For more info about Mosquito Shield of North Central NJ, click here.

CHIEF DEVELOPMENT OFFICER \n SUMMARY \n This member of the Executive Management Team has the oversight and ultimate responsibility for creating well-designed and financially sustainable affordable and market-rate housing. The Chief Development Officer will lead all development activities for the Newark Housing Authority, providing management and oversight of our development staff. Department activities encompass all facets of housing development, including site identification, project feasibility evaluation, applying for and securing financing, and construction supervision. The position is also responsible for developing the long-term vision and strategic planning for the development team. General supervision is exercised over a small number of professional staff. Does related work as required. \n \n ESSENTIAL DUTIES AND RESPONSIBILITIES \n • Provides development strategies for current and future development projects and HUD programs such as Rental Assistance Demonstration (RAD), Low-Income Housing Tax Credits (LIHTC), Mixed Finance (MF), Project Based Vouchers (PBV), Project Based Rental Assistance (PBVA), etc. \n • Collaborates with the Asset Manager to evaluate and provide for maintenance and rehabilitation of projects and coordinates the implementation of quality control inspections. \n • Develops plans for successful development of affordable housing projects, including extensive financial investment analysis, pro-forma modeling of new developments, opportunistic investment strategies, and potential acquisition opportunities. \n • Directs activities with attorneys, architects, engineers, and other consultants to plan projects related to public entitlement, site permits, acquisition due diligence, and closing activities. \n • Monitors procedures and policies to ensure compliance with HUD regulations and agency policy compliance. Completes all related reports as required. \n • Creates and supervises the development of construction including standard boiler plate for bid specifications, contracts, notices to proceed, change orders, time extensions, stop work orders, and contract settlement documents. \n • Confers with federal, state, and local officials related to plans, construction proposals, financing and budgets, providing information and briefing to the Board of Commissioners, planning commissions, advisory boards, and other official groups as necessary. \n • Provides oversight, physical and financial evaluation of land and properties, obtains information and analyzes land use, including ownership, zoning, compliance with master plans, special use permit requirements, environmental problems, utility availability, and compiles required documents and applications. \n • Evaluates the effectiveness of projects under development and issues instructions governing their progress as needed. \n • Pursue prospective tenants for leasing of available commercial space and other non-housing project components and negotiate letters of intent and lease agreements to ensure achievement of stated development and investment goals. \n • Keeps up to date on new developments in urban planning, project management, affordable, low-income, and public housing field. \n • Leads and participates in the preparation of written information and instructional material for current and future Newark Housing Authority development and rehabilitation projects. \n • Responsible for real estate development projects from inception to completion. \n • Responsible for securing permanent financing for projects such as FHA loans, conventional mortgages and construction loans. \n • Review all proposals from investors and lenders to ensure project financing is structured in the best interest of the Authority. \n • Responsible for all required due diligence associated with real estate transactions. \n • Work with representatives from financial institutions, investors and government agencies to ensure timely closings of real estate transactions. \n • Oversee the Authority’s conversion from HUD’s Low-Income Public Housing properties to other more sustainable platforms. \n • Work with the Authority’s legal, architectural, financial and accounting firms throughout real estate transactions. \n • Ensure compliance with investors, HUD, NHA and other government agency reporting requirements and regulations. \n • Attend Owner Architect and Contractor (OAC) weekly meetings for properties under construction to ensure project remains on time and on budget. \n • Create marketing and management plans for projects. \n • Identify new real estate development opportunities and financing options. \n • Work with Occupancy Department and Asset Management on lease-up efforts and tenant eligibility to ensure timely delivery of tax credits. \n • Represent the Authority when meeting with outside agencies for funding opportunities. \n • Serve on procurement evaluation committees. \n • Perform routine supervisory duties including performance evaluation and maintaining discipline. \n • Performs all duties in accordance with Authority policies. \n \n QUALIFICATIONS \n • Extensive knowledge of applicable national, state and local rules, regulations, statutes, policies and procedures regarding Low-Income Housing, or other housing type as determined by the department at the time of job posting. \n • Extensive knowledge of operating policies and procedures of the Low-Income Public Housing program, IRS Low-Income Housing Tax Credit program and HUD’s Rental Assistance Demonstration program. \n • Extensive knowledge of all facets of affordable housing development procedures and requirements. \n • Familiar with appraisals, Property Needs Assessments, market studies and Phase I Environmental reports. \n • Organizational and problem-solving skills. \n • Demonstrated computer literacy including knowledge of Word, Excel, Adobe Acrobat, Yardi, PowerPoint and related applications. \n • Ability to organize and structure financing applications. \n • Ability to meet deadlines. \n • Ability to oversee multiple development projects at one time. \n • Ability to perform accurate mathematical functions. \n • Ability to write and proofread materials for accuracy. \n • Ability to multi-task and prioritize responsibilities. \n • Ability to communicate and interact appropriately with the public, applicants, residents and staff. \n • Ability to follow verbal and written instructions. \n • Ability to work effectively with others and work independently. \n • Analytical skills and problem-solving ability. \n • Customer relations skills. \n • Demonstrated attention to detail. \n • Demonstrated punctuality and reliability. \n • Ability to produce clear, accurate and timely reports \n \n EDUCATION, EXPERIENCE AND/OR CERTIFICATIONS \n Bachelor’s degree in business administration/finance, public administration, urban planning or a closely related field. Graduate degree preferred. \n • Experience should include at least ten (10) years of progressive responsibility in management and supervision in public housing management, construction, public finance or general contracting or similar professional employment. A combination of private sector and public sector background is highly desirable. \n • Detailed knowledge of affordable housing financing tools including Rental Assistance Demonstration (RAD), Low-Income Housing Tax Credits (LIHTC), Mixed Finance (MF), Project Based Vouchers (PBV), etc. \n • Direct experience managing complex and time-critical processes, funding requirements, and relationships to complete projects on time and on budget. \n • Extensive experience developing and maintaining external stakeholder and business relationships, including with regulatory agencies and government officials. \n • Demonstrated ability to work in partnerships with funders, investors, consultants, contractors, regulatory bodies, Newark Housing Authority residents, employees, and Board of Commissioners. \n • Adept at seeking out new properties and future development opportunities with the ability to evaluate risk and develop risk management plans for projects. \n • Demonstrated ability to source, negotiate, and execute contracts, public incentives and financing, debt financing, raw land and existing building acquisition, and all types of development related contracts. \n • Skilled in designing and implementing management systems and tools to create efficient, effective, and well documented business processes. \n • Excellent ability to communicate both orally and in writing. \n • Must be able to obtain PHM, RAD-PBV, HCV Executive Management Certification within first year of employment. \n \n ADDITIONAL WORKING CONDITIONS \n • Requires availability to work beyond normal workday. \n • Work environment consists substantially of indoor office activities performed in a heated/air-conditioned setting. \n • Occasional travel to various work locations in all weather conditions. \n • Position requires the need to walk, sit, and/or stand for extended periods of time. \n • Requires stooping, bending, crouching and/or reaching for files or tools. \n • Frequent repetitive hand movement (e.g. typing). \n • May lift, carry and/or push up to 20 pounds. \n • Appointees will be required to possess a valid driver's license and be insurable according to agency guidelines only if the operation of a vehicle, rather than employee mobility, is necessary to perform essential duties of the position

Job Description Pipe Welders needed for multiple industrial projects in the Salt Lake City, UT area. Primary duties will include Mig, Tig, and Stick welding stainless and carbon structural steel using 6010, 7018, and 309 stainless steel. There will be an informal weld test in the shop your first day, using whatever materials are available in the shop at the time. Benefits include medical, dental, and vacation after a 90 day probationary period. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Paying up to $40/hr No per diem Temp to perm with benefits Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job Description Sheetmetal Fabricators needed for multiple commercial construction projects near Riverdale, New Jersey area. This is primarily shop work, but occasionally there may be a need for you to assist with installation in the field. You will be fabricating various ductwork using a typical plasma machine and will need to be able to operate machine and its computer system. You must bring your own hand tools of the trade and you may be required to pass a pre employment drug and background screening upon arrival. Pay: up to $37/hour Per Diem: None Duration: 9 weeks Hours: 40/week Please call Grus Construction Personnel for an immediate interview or reply with resume! Phone: 888..230..9908 Fax: 888..230..9909 Email: registration@@gruspersonnel.com (remove the additional @ symbol) \nCompany Description We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker. We believe our mission is two-fold: to staff our client’s projects with the highest quality of skilled tradesmen available and to foster an environment in which the quality of our workers continues to increase. We are dedicated to delivering quality and efficiency in one package. Grus offers our workforce the opportunity for permanent employment and a diversified work experience through our many and varied clients. We believe the service Grus provides offers benefits to both the general contractor and the skilled worker.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking a Plumber to join our team. The Plumber will support the Plumbing department by performing Plumbing work and assist the forman on daily tasks and projects. Essential Functions • Install commercial and multi-unit residential plumbing systems with precision and expertise., • Implement commercial and multi-unit residential hydronic heating systems efficiently., • Test pipe systems and fixtures for leaks to ensure system integrity., • Interpret blueprints and project layouts effectively for accurate installations., • Identify and utilize necessary tools and special equipment for each job., • Complete required paperwork accurately and promptly within deadlines., • Maintain company-issued vehicle, tools, and equipment to ensure optimal performance., • Uphold company core values of integrity, excellence, teamwork, and innovation consistently., • Travel between job sites and the main office as needed., • Perform additional related duties as assigned by management.Education, Qualities & Skills required, • Five years of plumbing experience., • OSHA 10 Certification, • Strong organizational and multitasking skills., • Effective communication and active listening abilities., • Sound judgment and critical thinking., • Consistently professional behavior and conduct. Compensation Starts at $25 Hourly Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a full-time position Monday – Saturday 7am-3:30pm. Arrangements for flexibility of schedule on Saturday’s will be arranged with Supervisor. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR fO4kJ0UKQV

Job Description The Landscape Laborer is responsible for assisting with the installation and maintenance of landscaping projects for commercial and residential properties. This role performs a variety of outdoor labor tasks, including lawn care, planting, mulching, cleanup, and other landscape-related services. The ideal candidate is dependable, hardworking, and enjoys working outdoors as part of a team. Key Responsibilities: • Perform general landscape maintenance, including mowing, edging, trimming, weeding, pruning, and leaf removal., • Assist with landscape installation projects, including planting trees, shrubs, flowers, and laying mulch., • Operate a variety of landscaping equipment, including mowers, trimmers, blowers, hedge trimmers, and hand tools., • Load, unload, and transport materials, equipment, and supplies to and from job sites., • Assist with site preparation, grading, and cleanup activities., • Follow directions from Crew Leaders and Supervisors to complete assigned tasks efficiently and safely., • Maintain a clean and organized job site, equipment, and company vehicles., • Adhere to all company safety policies and procedures., • Report equipment malfunctions, property damage, or safety concerns promptly., • Assist with seasonal services such as spring and fall cleanups, snow removal, and property preparation. Qualifications • High school diploma or equivalent preferred but not required., • Previous landscaping, construction, or outdoor labor experience is a plus., • Ability to safely operate landscaping equipment and hand tools., • Strong work ethic and willingness to learn., • Ability to follow instructions and work effectively as part of a team., • Valid driver's license preferred but not required., • Reliable transportation to and from work. Physical Requirements: • Ability to lift and carry up to 50 lbs. regularly., • Ability to stand, walk, bend, kneel, and perform physical labor for extended periods., • Ability to work outdoors in varying weather conditions, including heat, cold, rain, and humidity., • Ability to work flexible hours, including occasional weekends and seasonal overtime as needed. Preferred Skills: • Experience with commercial landscaping and property maintenance., • Knowledge of basic plant and turf care practices., • Experience operating commercial landscape equipment., • Bilingual (Spanish/English) is a plus., • OSHA 10 certification preferred or willingness to obtain.\nCompany Description Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come. Let It Grow, Inc. has been shaping the landscape and site construction industry for 40 years, building a legacy of excellence, innovation, and team development. We take pride in fostering a workplace where dedication is recognized, long-standing team members are valued, and growth is encouraged at every level. Through internal promotions and ongoing training opportunities, we invest in our employees' success, helping them advance their skills and careers. At Let It Grow, we believe in collaboration, craftsmanship, and continuous improvement—creating an environment where professionals can thrive for years to come.

Job DescriptionJob Title: Construction Laborer / Warehouse Associate Location: South Hackensack, NJ Pay: $20-$24 an hour Job Description The Construction Laborer / Warehouse Associate supports the preparation, maintenance, and refurbishment of scaffolding and sidewalk canopy systems used on commercial construction projects throughout the New York City and New Jersey markets. This hands-on role focuses on sanding, painting, cleaning, assembling, and repairing scaffold components to ensure all materials are properly prepared, organized, and ready for shipment and installation at project sites. Responsibilities • Perform hands-on preparation, maintenance, and refurbishment of scaffolding and sidewalk canopy components., • Sand, paint, clean, and repair materials to meet established quality standards., • Utilize hand tools and power tools safely and effectively for daily tasks., • Assist with the assembly and disassembly of scaffold and canopy systems., • Load, unload, organize, and stage materials for shipment to project sites., • Inspect materials for damage and identify components that require repair or replacement., • Maintain warehouse organization, cleanliness, and safety standards., • Follow work instructions and collaborate with team members to achieve production goals., • Support inventory management and material tracking activities., • Perform general labor and construction-related tasks as needed to support operations. Essential Skills • Experience performing general labor in a construction or warehouse environment., • Ability to use hand tools safely and efficiently., • Ability to operate power tools in a safe and controlled manner., • Capability to perform assembly and disassembly tasks for structural systems., • Attention to detail when sanding, painting, cleaning, and repairing materials., • Ability to follow written and verbal work instructions accurately., • Strong teamwork and communication skills to collaborate with crew members., • Physical ability to lift, carry, and move materials and equipment as part of daily tasks. Additional Skills & Qualifications • Experience working with scaffolding or canopy systems is a plus., • Experience in construction-related tasks such as material handling or site preparation is beneficial., • Familiarity with warehouse organization and inventory tracking processes., • Ability to identify damaged materials and determine basic repair needs., • Bilingual English/Spanish language skills are highly preferred. APPLY TODAY!! Job Type & Location This is a Contract to Hire position based out of South Hackensack, NJ. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South Hackensack,NJ. Application Deadline This position is anticipated to close on Oct 5, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Join our team as a Landscape Laborer at Newark Airport. We are looking to hire immediately. The Landscape Laborer is responsible for keeping the entire outside perimeter of Newark Airport clean. This job is performed outside all year long. In this role you will pick up debris from the sides of the highway, taxi lot, uber lot and some parking garages using a picker. You will also trim hedges around airport signs on a as needed basis. You must be OSHA 30 certified for this job. The hours are Monday to Friday 7am to 3:30pm except Thursday 10am to 6:30pm. Responsibilities • Assist with keeping the perimeter of the airport clean by removing debris., • Support other team members, by working as a team player., • Operate hand tools and power tools safely when picking up debris, cutting shrubs, bushes or grass., • Conduct routine site inspections to ensure safety standards are met and report any issues requiring maintenance or repair Skills • Experience as general labor. OSHA 30 certification, mandatory., • Basics knowledge of landscape maintenance., • Proficiency with hand tools and power tools (chainsaws, blowers) used in landscaping., • Strong teamwork ethic with the ability to follow detailed instructions while working efficiently outdoors with other., • Commitment to safety protocols when handling equipment and working outdoors on very busy highways.\nCompany Description Capital Cleaning Service aka Flagg Labor supports general contractors and builders by sending general laborers and support trades to construction jobsite to keep the jobs running smoothly and efficiently. We also provide building maintenance threw our commercial cleaning/janitorial services. We are an industry leader in our field and have been doing this for over 15 years. Capital Cleaning Service aka Flagg Labor supports general contractors and builders by sending general laborers and support trades to construction jobsite to keep the jobs running smoothly and efficiently. We also provide building maintenance threw our commercial cleaning/janitorial services. We are an industry leader in our field and have been doing this for over 15 years.

Job Description Job Title: Electrical Assembler Job Description The Electrical Assembler will build and integrate electrical and mechanical products to completion by following detailed electrical drawings, schematics, and fabrication prints. This role requires strong attention to detail, the ability to work independently according to a production schedule, and effective collaboration with shop leadership and cross-functional teams. The Electrical Assembler will support a high-quality, safety-focused environment and operate within an ISO 9001 Quality System. Responsibilities • Assemble electrical and mechanical products to completion by following electrical drawings, schematics, and fabrication prints., • Read and interpret complex electrical and mechanical assembly fabrication drawings and blueprints., • Perform electrical wiring, low-voltage connections, and switchgear or switchboard assembly as required., • Work independently while following a defined production schedule and meeting established deadlines., • Collaborate with shop leads to communicate progress, quality concerns, and production schedule updates., • Assist coworkers and support other departments with assembly and integration tasks as needed., • Participate actively in shop cleanup activities to maintain a clean, organized, and safe work area., • Operate consistently within the requirements of an ISO 9001 Quality System., • Follow company safety, quality, and environmental policies to maintain compliance with operational and regulatory standards., • Remain aware of and comply with environmental and safety regulations, performing all duties to high quality standards., • Provide direction to others on how to complete assembly tasks and support leading a crew when required., • Use hand tools and fabrication processes safely and efficiently during assembly and integration work. Essential Skills • Ability to read and interpret complex electrical and mechanical assembly prints, drawings, and schematics., • Demonstrated mechanical aptitude and ability to excel at the physical assembly of parts and components., • Familiarity with electrical wiring and electrical assembly processes, including low-voltage applications., • Experience with electrical assembly of products such as switchgear, switchboards, or similar equipment., • Ability to work independently while following a production schedule and meeting deadlines., • Capability to communicate clearly with shop leads and team members regarding quality and production issues., • Advanced knowledge and practical use of hand tools in an assembly environment., • Understanding of and ability to operate within an ISO 9001 Quality System., • Commitment to following safety, quality, and environmental policies and procedures. Additional Skills & Qualifications • Ability to direct others in assembly tasks and assist in leading a crew on the shop floor., • Experience working with fabrication processes related to electrical and mechanical assemblies., • Comfort working alongside team members from other departments to complete final integration of products., • Strong attention to detail and quality-focused mindset in a production environment., • Willingness to participate in shop cleanup and general housekeeping activities. Job Type & Location This is a Permanent position based out of North Arlington, NJ. Pay and Benefits The pay range for this position is $41600.00 - $52000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. 401kfull health benefits - dental vision medicalsick pay Workplace Type This is a fully onsite position in North Arlington,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Electrical Assembler Job Description The Electrical Assembler will build and integrate electrical and mechanical products to completion by following detailed electrical drawings, schematics, and fabrication prints. This role requires strong attention to detail, the ability to work independently according to a production schedule, and effective collaboration with shop leadership and cross-functional teams. The Electrical Assembler will support a high-quality, safety-focused environment and operate within an ISO 9001 Quality System. Responsibilities • Assemble electrical and mechanical products to completion by following electrical drawings, schematics, and fabrication prints., • Read and interpret complex electrical and mechanical assembly fabrication drawings and blueprints., • Perform electrical wiring, low-voltage connections, and switchgear or switchboard assembly as required., • Work independently while following a defined production schedule and meeting established deadlines., • Collaborate with shop leads to communicate progress, quality concerns, and production schedule updates., • Assist coworkers and support other departments with assembly and integration tasks as needed., • Participate actively in shop cleanup activities to maintain a clean, organized, and safe work area., • Operate consistently within the requirements of an ISO 9001 Quality System., • Follow company safety, quality, and environmental policies to maintain compliance with operational and regulatory standards., • Remain aware of and comply with environmental and safety regulations, performing all duties to high quality standards., • Provide direction to others on how to complete assembly tasks and support leading a crew when required., • Use hand tools and fabrication processes safely and efficiently during assembly and integration work. Essential Skills • Ability to read and interpret complex electrical and mechanical assembly prints, drawings, and schematics., • Demonstrated mechanical aptitude and ability to excel at the physical assembly of parts and components., • Familiarity with electrical wiring and electrical assembly processes, including low-voltage applications., • Experience with electrical assembly of products such as switchgear, switchboards, or similar equipment., • Ability to work independently while following a production schedule and meeting deadlines., • Capability to communicate clearly with shop leads and team members regarding quality and production issues., • Advanced knowledge and practical use of hand tools in an assembly environment., • Understanding of and ability to operate within an ISO 9001 Quality System., • Commitment to following safety, quality, and environmental policies and procedures. Additional Skills & Qualifications • Ability to direct others in assembly tasks and assist in leading a crew on the shop floor., • Experience working with fabrication processes related to electrical and mechanical assemblies., • Comfort working alongside team members from other departments to complete final integration of products., • Strong attention to detail and quality-focused mindset in a production environment., • Willingness to participate in shop cleanup and general housekeeping activities. Job Type & Location This is a Permanent position based out of Kearny, NJ. Pay and Benefits The pay range for this position is $41600.00 - $52000.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. 401kfull health benefits - dental vision medicalsick pay Workplace Type This is a fully onsite position in Kearny,NJ. Application Deadline This position is anticipated to close on Sep 30, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description At Inter-Co Division 10, we specialize in the distribution and installation of toilet partitions, lockers, washroom accessories, glass shower systems and other specialty construction products. With 11 locations across Canada and the United States, it is our mission to create the leading North American Division 10 distribution company focused on exceptional customer service, competitive pricing and industry-leading expertise and project delivery. Looking for a new opportunity? We are currently looking for a Junior Sales Estimating Representative for our office in Kearny, New Jersey. This position will be responsible for: • Active sales & customer-development, • Quote jobs for General Contractors by reviewing drawings, specifications, and project requirement to ensure complete and competitive bids, • Prepare accurate cost estimates for commercial construction projects, • Source products from various suppliers to obtain competitive material cost, • Follow up with customers on quotes and to negotiate contracts, • Call customers to conduct pre-bid calls, clarify project scopes and get on bidders lists, • Ability to balance time between estimating work and customer outreach Is this the right role for you? • Full-time in-office position, • You have an eagerness to learn, grow & develop, • An ability to create & maintain positive relationships, • Proactive & direct communication skills, • Strong organizational skills & attention to detail, • Confidence in negotiation & problem solving ability, • Interest in the construction industry and willingness to learn and grow within the sector, • Ability to thrive in a team-oriented and fun work environment, • The compensation package for this position will consist of a base salary plus commissions based on attainable sales targets. What You’ll Bring: • Undergraduate Degree, • Knowledge of the construction industry would be considered an asset, • A valid state driver’s license with access to a personal vehicle, • A strong sense of hustle and drive, with a proactive approach to customer outreach Why work for Inter-Co? • End your workday early every Friday at 2:00pm, • Group Health Benefits including medical, dental and vision, • Employee Shared Purchase Plan with company matching, • 401K Plan with company matching, • Travel Incentive Program to visit company locations, • Paid time-off between Christmas and New Years Day, • You’ll be joining a rapidly growing fast-paced business with multiple locations across Canada and the United States Think you’d be a great fit? We want to hear from you—come grow with us. As we are committed to providing a positive candidate experience, only those selected for an interview will be contacted. Applicants who may require an accommodation during the selection process are encouraged to notify the Human Resources Department when contacted for an interview.

Job DescriptionDescription: General Position Summary As a CDL Truck Driver employed by Alff Construction, completes assigned duties in a timely and efficient manner. Performs quality work that meets the customer and owner’s expectations. Communicates with peers and upper-level management effectively and clearly. This role will have extensive knowledge of the industry in driving and hauling materials and equipment. This role will be organized, maintain a high- level of customer service in all dealings, be very dependable and have superior time management ability. Alff’s equipment with GPS tracking, e-logs, and dashcams with event detection. Drivers must be safety minded and will follow all applicable laws and regulations for the associated work. Travel (% of work period) As needed, which may include overnight stays. Essential Job Functions · Follow instructions from supervisors to perform deliveries to assigned locations · Will deliver salt and brine and haul other materials and equipment · Report issues with equipment or unsafe conditions · Abide by safety procedures when using equipment · Equipment operations and loading, and safe load securement · Performs all duties assigned by management in a timely and safe manner · Professional driving attitude · Other duties as assigned Requirements: Minimum Qualifications • Background in driving and hauling materials and equipment., • Experience with bulk hopper trailers, tanks, equipment trailers (Flatbed, detach, step-deck), bulk tanks and tank trailers, • Possesses a moderate understanding of general aspects of the job. Must have experience in bulk transportation/equipment hauling., • Must be 25 years old, • Must have current Class A CDL and DOT medical Exam and Commercial Motor Vehicle Certification with tank endorsement. Hazmat not required., • Must be fluent in speaking, reading, writing and understand English. Computer Skills: Quick learning ability for new database programs, proficient navigation of communication platforms (such as GPS Mobile application, etc.), and moderate proficiency in Microsoft Suite programs.

Job DescriptionJoin Our Team as a Solar Panel Installer! Looking for a hands-on, full-time opportunity in the growing solar industry? We are a company with 15 years of experience in all areas of solar, and we’re excited to bring on a motivated Solar Panel Installer to join our team. Whether you’re looking to grow your skills or take the next step in your construction career, this could be the perfect fit for you! What You’ll Do As a Solar Panel Installer, you’ll play a key role in helping us bring clean, renewable energy to our clients. Your day-to-day responsibilities will include: • Installing solar panels on rooftops and other structures., • Ensuring all installations meet safety and quality standards., • Working collaboratively with team members to complete projects efficiently., • Handling tools and equipment necessary for solar panel installation.What We’re Looking For We’re looking for someone who’s ready to roll up their sleeves and get to work. Here’s what you’ll need to succeed in this role: • 1 year of general construction experience (solar experience is not required)., • Comfort working at heights and on rooftops., • The ability to lift and carry up to 40 lbs., • A positive attitude and willingness to learn.Why Join Us?, • Competitive starting pay: $15.00/hour to start., • Be part of a company with 15 years of expertise in the solar industry, offering a stable and supportive environment., • Hands-on experience in a growing field with opportunities to build your skills.Ready to Apply? If you’re ready to take on a rewarding role in the solar industry, we’d love to hear from you! Apply today and start your journey with a team that’s passionate about renewable energy and quality craftsmanship. By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

Job Description Key Responsibilities Receiving & Processing: • Unload incoming shipments and verify contents against purchase orders., • Inspect materials for damage or discrepancies. Inventory Management: • Organize and store products in designated locations., • Use inventory management systems to update stock records., • Conduct regular inventory counts and report discrepancies. Order Fulfillment: • Pick, pack, and prepare orders for shipping according to customer requirements., • Label and palletize outgoing shipments. General Warehouse Duties: • Operate warehouse equipment (e.g., forklifts, pallet jacks) safely., • Maintain cleanliness and organization of the warehouse., • Follow all safety procedures and company policies. Documentation: • Complete shipping and receiving paperwork accurately through excel and other internal systems., • Assist with cycle counts and physical inventories. Qualifications • High school diploma or equivalent preferred., • Previous warehouse or logistics experience., • Ability to lift/move items up to 50 lbs., • Basic math and computer skills., • Attention to detail and organizational skills., • Ability to operate warehouse equipment (training may be provided)., • Willingness to work flexible hours, including overtime if needed., • Drivers License for over 2 years, • Proficiency in Excel, including basic addition and multiplication formulas and data input. Skills • Physical stamina and strength, • Good communication skills, • Teamwork and reliability, • Problem-solving ability Experience: • inventory management: 2 years (Required), • warehouse: 2 years (Required)\nCompany Description Lotus Connect is a Procurement-as-a-Service company providing end-to-end procurement solutions for organizations in education, healthcare, government, transportation, and construction. From design and distribution to delivery, we ensure that every product meets our client's operational, budget, and compliance requirements. Lotus Connect is a Procurement-as-a-Service company providing end-to-end procurement solutions for organizations in education, healthcare, government, transportation, and construction. From design and distribution to delivery, we ensure that every product meets our client's operational, budget, and compliance requirements.

Job Description Position: Receiving Associate Location: Lodi, NJ Shift: First Shift Pay: $22 hour Send updated resume to kimartin@ aerotek.com for IMMEDIATE consideration We are seeking a dependable Shipping & Receiving Associate to support daily warehouse and manufacturing operations. This hands on role is responsible for receiving incoming materials, preparing outgoing shipments, organizing inventory, and moving materials throughout the facility while maintaining safety and accuracy. Must have experience in working in chemical manufacturing. • Receive, inspect, and organize incoming materials and shipments, • Prepare, package, label, and stage orders for shipment, • Load and unload deliveries safely and efficiently, • Verify shipments for accuracy and report damaged or missing items, • Move raw materials and finished products throughout the facility, • Maintain accurate shipping, receiving, and inventory documentation, • Keep warehouse and shipping areas clean and organized, • Follow all SOP, safety, and quality procedures, • Assist with general warehouse and material handling duties as needed Qualifications • Chemical manufacturing experience required., • Previous shipping, receiving, warehouse, or material handling experience., • Ability to lift up to 60 pounds, • Strong attention to detail and accuracy, • Ability to work in a fast-paced manufacturing environment, • Dependable with a strong focus on safety and teamworkJob Type & Location This is a Contract to Hire position based out of Lodi, NJ. Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lodi,NJ. Application Deadline This position is anticipated to close on Oct 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Pharmaceutical Manufacturing Packaging Machine Operators Needed in West Caldwell, NJ on All 3 Shifts! Position: Machine Operator Shift: 1st: 6am-2:30pm (Monday-Friday) 2nd: 2pm-10:30pm (Monday-Friday) 3rd: 10pm-6:30am (Sunday Night - Friday morning) Location: West Caldwell, NJ Pay: $22-$24/hour ; Overtime: $33-$36/hour Job Description The Packaging Operator plays a key role in pharmaceutical manufacturing by operating vial filling, fabrication, and secondary packaging equipment in a cleanroom environment. This role focuses on accurate and efficient packaging, strict adherence to Good Manufacturing Practices (GMP), and meticulous documentation to ensure product quality and compliance. The position requires hands-on work with packaging lines, labeling, inspection, and general production activities. Responsibilities • Operate vial filling machines, fabrication machines, and secondary packaging equipment, including labeling systems and semi-automatic packaging equipment, in accordance with GMP and standard operating procedures., • Clean, set up, and prepare manufacturing and packaging equipment prior to production runs to ensure proper operation and product safety., • Verify that all calibration stickers on equipment are current and accurate before use., • Record all required information in appropriate logbooks and batch records in a clear, accurate, and timely manner., • Palletize completed work and transport finished product to the warehouse as needed, following established handling procedures., • Complete downtime logs accurately and contemporaneously, documenting reasons for delays or stoppages and actions taken., • Meet established scrap rate goals by following procedures, monitoring equipment performance, and handling materials carefully., • Communicate effectively with IPC Operators and relevant team members regarding quality concerns, component issues, and machine performance., • Ensure that all reconciled labeling materials, including pouch stock, inserts, shipper labels, and waste, are properly accounted for and documented., • Report and communicate mechanical issues, production status, and other relevant information to incoming and outgoing shifts to support smooth handovers., • Apply knowledge of all relevant standard operating procedures (SOPs) in daily activities and ensure practical, compliant execution of tasks., • Perform visual inspection of products and packaging to identify defects or nonconformities and take appropriate corrective actions., • Use basic tools and equipment to make minor adjustments or perform routine tasks on the packaging line as required., • Follow gowning procedures and other cleanroom protocols to maintain a controlled and compliant manufacturing environment. Essential Skills • Minimum of 3 years of pharmaceutical packaging experience, including work on packaging lines and in GMP-regulated environments., • High school diploma or equivalent education., • Demonstrated ability to operate vial filling machines, fabrication machines, and secondary packaging equipment, including labeling and semi-automatic packaging systems., • Experience working in a cleanroom or controlled manufacturing environment., • Knowledge and practical application of relevant standard operating procedures (SOPs)., • Basic reading, writing, and verbal communication skills to follow instructions and complete documentation accurately., • Basic mathematical skills for counting, reconciliation, and recording production data., • Basic proficiency in using tools and equipment for routine tasks and minor adjustments on the production line., • Good manual dexterity to handle small components and packaging materials safely and efficiently., • Strong visual acuity to perform inspections and identify quality issues., • Ability to lift or move 25 to 49 pounds as part of regular job duties., • Ability to gown appropriately for manufacturing and adhere to cleanroom requirements. Additional Skills & Qualifications • Experience with general production and packing activities in a manufacturing setting., • Familiarity with GMP documentation practices, including batch records, logbooks, and downtime logs., • Comfort working on pharmaceutical packaging lines, including labeling, inspection, and reconciliation of packaging materials., • Attention to detail and strong focus on accuracy in both production tasks and documentation., • Ability to work effectively on a second-shift schedule and coordinate information across multiple shifts., • Reliability and consistency in meeting production goals and scrap rate targets.Job Type & Location This is a Contract to Hire position based out of Caldwell, NJ. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Caldwell,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Braun & Chamberlin, Inc. is seeking a dependable, conscientious, and organized individual for an entry-level Administrative Assistant / Office Support position. This role focuses on administrative responsibilities requiring an on-site presence, while also supporting management and team members who work remotely. As the employee becomes familiar with company procedures, responsibilities may expand to include Accounts Payable and/or Accounts Receivable using QuickBooks. The ideal candidate takes initiative, demonstrates strong attention to detail, and approaches their work with accuracy and professionalism — someone who can prioritize competing responsibilities, follow through on tasks, communicate effectively, and work independently with minimal supervision. Primary Responsibilities Office & Administrative Support • Answer incoming calls and assist visitors, vendors, and deliveries, • Monitor important office deadlines and upcoming bid dates, • Coordinate office supply purchases and general office needs, • Provide administrative support to management and remote team members Job & Document Support • Enter and maintain construction project information and files, • Prepare proposals, change orders, correspondence, and other business documents, • Organize and distribute incoming mail and correspondence, • Scan and forward documents to appropriate team members Qualifications • Proficiency with Microsoft Office (Word, Excel, Outlook) and general computer literacy, • Strong organizational and communication skills, • Excellent attention to detail and accuracy, • Ability to prioritize multiple responsibilities effectively, • Self-motivated and able to work independently, • Dependable, conscientious, and willing to learn, • Consistent attendance and punctuality (on-site position) Growth Opportunity As the employee becomes familiar with company procedures, this role may expand to include Accounts Payable and Accounts Receivable using QuickBooks Enterprise. Previous accounting or QuickBooks experience is preferred. \nCompany Description Braun & Chamberlin, Inc. is an established commercial painting contractor with more than 40 years of experience serving clients throughout New Jersey & New York. Braun & Chamberlin, Inc. is an established commercial painting contractor with more than 40 years of experience serving clients throughout New Jersey & New York.

Job Description Monday–Friday | 20–25 hours per week We are seeking a highly organized and detail-oriented Office Administrator to support the daily operations of our Hawthorne, NJ office. This role is essential to keeping our workplace running smoothly by managing administrative functions, supporting multiple departments, and handling light accounting tasks. The ideal candidate is proactive, dependable, and comfortable juggling multiple responsibilities in a fast-paced environment. Key Responsibilities: • Manage and respond to emails, phone calls, and general correspondence in a timely manner, • Perform general office tasks including scanning, mailing, distributing mail, and coordinating deliveries, • Greet and assist visitors with a professional and welcoming attitude, • Manage executive calendars, appointments, and travel arrangements, • Support team members with administrative needs across departments, • Plan and coordinate company events, • Monitor and order office supplies, • Communicate with vendors and service providers, • Coordinate building maintenance and repairs as needed, • Maintain tracking logs for company equipment, vehicles, and insurance documentation, • Set up workspaces for new hires and assist with onboarding logistics, • Light accounting responsibilities, • Perform other duties as assigned Qualifications & Experience: • Minimum of 2 years' experience in office administration or similar role, construction industry a plus, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook), • Experience with light accounting or bookkeeping tasks preferred, • Detail-oriented with the ability to prioritize and multitask, • Excellent written and verbal communication skills, • Strong organizational and time-management skills, • Positive, adaptable, and team-oriented mindset\nCompany Description Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law. Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job DescriptionDescription: Specialty Millwork and Fixture Installation Contractor seeking Career Minded Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing cabinets, casework, wall panels, column wraps, millwork and standing and running trim in commercial and retail environments. Requirements: Education: High School, Trade School or Equivalent Experience: Five years installation and Commercial or Retail finish carpentry experience. One year minimum supervisory experience. Conditions of employment · Undergo pre-employment DRUG SCREENING, CRIMINAL BACKGROUND CHECK and MVR screening for approved driving status. · Complete a Company Sponsored CPR/First Aid Training course online. · Available to work overtime as needed. A typical workweek is 40 to 60 hours. · Flexible to work non-conventional shifts if needed (overnight projects may occur). · Able to travel from home for durations of 2-8 weeks. · Provide your basic hand tools and cordless drill. · Certifications: OSHA 10 or 30, Forklift, aerial lift (Training will be provided as needed). Responsibilities and skills · Capable of managing and motivating others. · Able to interact professionally with clients, general contractors and sub-contractors. · Clearly and effectively communicate with Project Management Team · Personnel management of various crews ranging from 3-8 people. · Interpret layouts for millwork, fixtures and other elements. · Evaluate site conditions, construction and delivery schedules. · Identify non-contract scope and generate added work changes if necessary. · Working knowledge and understanding of architectural drawings, shop drawings and floorplans, woodworking tools. · Receive, stage and manage inventory of millwork and fixture parts. · Perform all tasks of a working carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Submit time sheets, expense reports, daily reports and progress photos electronically. · Support a strong commitment to site safety. Physical Demands Ability to walk and stand for extended periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long and Short-term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. “OUR CORE VALUES DRIVE EVERY DECISION AND AREINTERWOVEN INTO EVERYTHING WE DO”We lead the pack. We are fair, honest and respectful in every interaction.We got your back. We support and encourage doing what’s right,even when it’s not easyWe have fun. We inspire, have passion, and create fun in all that we do.We get it done. We are driven to hold ourselves accountable in making “yes” happen.

Job Description We are seeking a part-time administrative professional to provide essential day-to-day support for our architectural office. Responsibilities will include preparing proposals, conducting market research, processing invoices and supporting accounting-related tasks, establishing and maintaining project filing systems, organizing office procedures, and providing general administrative assistance to keep office operations efficient and organized. The ideal candidate will be detail-oriented, organized, dependable, and comfortable managing multiple priorities. Proficiency in Microsoft Office Suite, Adobe Acrobat, Adobe Photoshop, and QuickBooks is required, along with strong communication, organizational, and computer skills. \nCompany Description We are a multi-discipline firm and we work on a number of different project types. Our staff is well versed in both deign and construction, as well as project management and the construction process. Our office is fast paced, and client follow up is crucial We are a multi-discipline firm and we work on a number of different project types. Our staff is well versed in both deign and construction, as well as project management and the construction process. Our office is fast paced, and client follow up is crucial

Job Description SCENIC CARPENTER Special Event Fabrication company seeks over hire carpenters to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Head of Carpentry Candidates for the Scenic Carpenter position should possess solid carpentry skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experience with power tools and construction techniques specific to scenic production is highly valued. Being well versed in using a wide range of equipment, carpentry power tools, skills and materials to construct and finish a variety of large- and small-scale scenic items to the highest of standards to tight timescales. ESSENTIAL – REQUIRED SKILLS · Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time · Able to work at height on ladders and access platforms · Ability to read and understand CAD Drawings · Ability to read and understand Build Drawings · Ability to work from scale drawings, models, plans, sketches, verbal ideas and references · Ability to create cut lists, material needs, etc. to complete a project · Excellent practical woodwork and resistant material skills · Adhere to safety standards and proper handling of equipment and gear · Ability to organize/prioritize and complete multiple tasks simultaneously on the job · Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager -Hourly Position with possibility of overtime when necessary \nCompany Description Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. *Be sure your resume file is named with your last name and first name. *Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at. Founded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. \r\nKadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs.\r\nBe sure your resume file is named with your last name and first name.\r\nYour resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Job Description Lead Carpenter – Residential Remodeling & New Builds Unique Home Remodeling Professionals, LLC — South Jersey Pay: $30/hr (Full-Time, Overtime Available) Schedule: Monday–Friday, occasional Saturdays during busy periods (40+ hours/week) Location: South Jersey & Surrounding Areas Experience Required: Minimum 5 years in residential carpentry About Us Unique Home Remodeling Professionals (UHRP) is a growing, family-operated general contracting company specializing in high-end residential remodeling, custom home builds, and additions throughout South Jersey. From $50k renovations to $1M+ new homes, we are known for our workmanship, reliability, and strong client relationships. We are seeking an experienced, motivated Lead Carpenter who can both manage job sites and perform hands-on carpentry at a high level. This position is critical to maintaining UHRP’s standards for quality and professionalism. Position Overview The Lead Carpenter will act as the primary on-site leader for residential construction projects. This is a fully hands-on role requiring strong carpentry skills, leadership ability, and the capacity to run job sites with little to no supervision. You will perform and oversee carpentry tasks, coordinate with subcontractors, maintain jobsite productivity, and ensure projects stay on schedule with high-quality results. Key Responsibilities Lead daily on-site operations for remodeling projects, additions, and new residential builds Perform hands-on carpentry including: Framing (rough + structural) Trim work (casing, baseboard, doors, crown molding, etc.) Installation of doors, windows, and architectural details Standard carpentry trade techniques required for residential construction Manage workflow, assign tasks, and maintain productivity Oversee subcontractors (electrical, plumbing, HVAC, masonry, etc.) to ensure quality and schedule alignment Read and interpret blueprints, plans, and architectural drawings Maintain a clean, safe, and organized job site Track materials, prevent waste, and manage inventory Communicate daily with project management and ownership regarding progress and site needs Ensure all work meets UHRP quality standards and complies with building codes Represent UHRP professionally when interacting with clients and homeowners Required Qualifications Minimum 5 years of residential carpentry experience (must be proficient in framing & trim) Strong understanding of standard carpentry techniques, tools, and safety procedures Ability to run job sites independently and lead small crews when needed Reliable transportation to job sites Must have your own carpentry tools and tool belt Ability to lift 50+ lbs regularly Ability to follow schedules, meet deadlines, and maintain a high level of organization Strong communication and problem-solving skills Dependable, punctual, self-motivated, and hardworking What We Offer Competitive pay at $30/hr 40+ hours per week during busy periods (overtime available) Consistent year-round work Opportunity for advancement as the company continues to grow Family-oriented and supportive work environment Involvement in high-end residential projects and custom home builds Why Work With UHRP? You will work directly with ownership and be a key part of a company that is rapidly expanding. We value professionalism, craftsmanship, and teamwork — and we reward employees who show initiative, leadership, and dedication. At UHRP, you’re not “just a carpenter” — you’re the driving force behind projects that homeowners rely on and trust. How to Apply Submit your resume, work history, or a brief summary of relevant experience. Candidates must meet the required qualifications to be considered.

Apartment Maintenance Technician Location: Elmwood Park, NJ 07407 Shift: 8:00am-4:30pm Duration: 30 days Job Duties: -Perform routine maintenance and repairs across apartments and common areas, including plumbing, electrical, HVAC, carpentry, painting, appliances, and unit turnovers. -Respond quickly to resident service requests and complete work orders efficiently to maintain resident satisfaction and property standards. -Prepare vacant units for new residents by conducting inspections, repairs, cleaning, and make-ready improvements. -Support overall property operations through preventative inspections, seasonal maintenance, safety compliance, vendor coordination, and participation in emergency on-call services. Job Requirements: -Minimum 2 years of property maintenance experience with knowledge of HVAC, plumbing, electrical systems, and general construction. -Skilled in safely operating hand and power tools, with strong troubleshooting and problem-solving abilities. -Strong communication and interpersonal skills to effectively work with residents, vendors, and team members. -High school diploma or equivalent required; must have a valid driver's license, reliable transportation, and ability to perform physical labor, including lifting up to 50 lbs and climbing ladders.

Job Description REMOTE POSITION, BUT CANDIDATE MUST RESIDE IN NEW JERSEY AND BE AVAILABLE FOR OCCASIONAL SITE VISITS IN NYC/NORTHERN NJ. Compensation is negotiated as a lump-sum fee for each assigned project or scope of work, based on the project scope, schedule, and responsibilities. This is not an hourly employee position. Project workload will vary, and no minimum number of projects or amount of work is guaranteed. Our goal is to develop long-term relationships with strong freelance professionals who can become regular members of AEP's extended project team. Qualified contractors may be added to our team for future assignments and contacted as suitable projects become available. Work is primarily performed from home. Occasional site visits in Northern NJ and NYC are required AEP Engineering, LLC is a growing MEP engineering consulting firm seeking an experienced, highly reliable U.S.-based freelance Plumbing / Fire Protection / Sprinkler Designer within practical driving distance of the New York City / Northern New Jersey metropolitan area to support commercial and residential building projects. This is a 1099 independent-contractor position only. We are looking for an established freelancer or independent professional with meaningful availability for ongoing project work. This is not intended as a moonlighting position for someone whose full-time employment will take priority over AEP projects. The right person will become a trusted recurring member of our extended project team and will be expected to take ownership of assigned work, meet commitments, and communicate proactively. Responsibilities Typical responsibilities may include: • Develop plumbing and fire-protection designs from architectural backgrounds, project criteria, and direction from AEP, • Develop domestic cold- and hot-water distribution systems, • Develop sanitary waste and vent systems, • Develop storm-drainage systems where applicable, • Develop natural-gas distribution systems where applicable, • Perform plumbing fixture-unit, water-demand, sanitary, storm, and gas-load calculations, • Size piping and related plumbing-system components, • Design domestic water-heating systems and select equipment, • Develop plumbing riser diagrams and schematics, • Coordinate plumbing requirements for architectural, mechanical, electrical, kitchen, specialty, and other equipment, • Develop fire-protection and sprinkler-system layouts where included in the project scope, • Determine applicable sprinkler design criteria, hazard classifications, design densities, coverage requirements, and system requirements, • Develop sprinkler head layouts, piping arrangements, risers, standpipes, and related fire-protection systems as applicable, • Develop fire-protection performance criteria and coordinated design drawings for delegated-design sprinkler systems where appropriate, • Perform or assist with sprinkler hydraulic calculations where required, • Review available water-supply information and identify when additional flow-test or utility information is required, • Coordinate fire-protection systems with architectural, structural, mechanical, electrical, fire alarm, and plumbing disciplines, • Prepare plumbing and fire-protection plans, schedules, risers, details, notes, and specifications, • Assist with equipment selections and technical product review, • Identify coordination conflicts and missing information before they affect the project, • Incorporate review comments and revisions, • Perform self-QA/QC before submitting work for AEP review, • Assist with responses to contractor, architect, and client technical questions as required What We Are Looking For We are looking for a designer, not simply a CAD operator. The ideal candidate can receive architectural backgrounds and project requirements, understand the design intent, determine what needs to be done, and independently develop coordinated plumbing and fire-protection designs without requiring every pipe, fixture connection, valve, sprinkler head, riser, and note to be individually marked up. Technical ability is important, but reliability, communication, and ownership are equally important to us. We are specifically looking for someone who: • Treats agreed project deadlines as firm commitments, • Does not place AEP projects on the back burner because another client becomes more urgent, • Communicates immediately if an issue could affect scope, schedule, or quality, • Proactively identifies missing information, coordination issues, design concerns, and potential problems, • Asks questions early rather than allowing uncertainty to become a last-minute issue, • Takes ownership of assigned work from start through completion, • Is receptive to feedback and willing to learn AEP's preferred design standards, procedures, and workflows, • Reviews their own work carefully before submitting it, • Communicates clearly and professionally, • Is reasonably available during normal U.S. business hours Qualifications • Professional experience designing plumbing systems for buildings, • Professional experience with fire-protection and sprinkler-system design, • Strong AutoCAD skills, • Experience producing permit and construction-document drawing sets, • Knowledge of domestic water, sanitary, vent, storm, natural gas, and domestic water-heating systems, • Experience performing plumbing sizing and demand calculations, • Working knowledge of sprinkler-system design, hazard classifications, densities, sprinkler coverage requirements, piping arrangements, and hydraulic principles, • Familiarity with standpipe systems and fire-service requirements where applicable, • Ability to distinguish between engineer-of-record design requirements and delegated sprinkler-contractor design responsibilities, • Ability to read and coordinate architectural and other engineering drawings, • Strong written and verbal English communication, • Ability to work independently and remotely, • U.S.-based, • Experience with commercial, multifamily residential, healthcare, retail, office, renovation, and/or new-construction projects is preferred, • Working knowledge of the IBC, IPC, applicable fuel-gas codes, NFPA 13, NFPA 13R, NFPA 14, and the NYC Building and Plumbing Codes is required. Candidates must understand the major code sections, know how they affect their design, when they apply, and know how to efficiently locate and interpret applicable code requirements when asked., • Familiarity with NYC fire-protection requirements and FDNY-related requirements is strongly preferred, • PE licensure is not required for this position Site Survey / Local Travel Requirement This is a remote freelance position, but candidates must be located within reasonable driving distance of AEP's primary New York/New Jersey project area and must be willing and able to travel to project sites as needed. Responsibilities may include: • Conducting existing-condition and due-diligence site surveys, • Documenting existing plumbing fixtures, piping, water services, sanitary and storm systems, gas services, sprinkler systems, standpipes, fire services, and related building conditions, • Taking field measurements, photographs, pipe-size information, equipment information, and utility information, • Identifying visible conflicts, deficiencies, and conditions that may affect the proposed design, • Organizing field notes and survey information for use in design, • Communicating significant field findings promptly to AEP Candidates must have: • Reliable transportation, • A valid driver's license, • Ability and willingness to travel to project sites in New Jersey, New York City, and surrounding areas, • Confidence working independently in occupied and unoccupied buildings, • Ability to conduct thorough, organized field surveys without requiring constant direction Software and Equipment Requirements As an independent contractor, you must provide and maintain your own: • Computer and related hardware, • Reliable high-speed internet connection, • AutoCAD software suitable for performing the required work, • Microsoft 365 software, including Word, Excel, Outlook/email, and other standard office applications, • Professional email and reliable phone/online communication capability, • Any other general software and equipment normally required to perform your freelance design work AEP does not provide computer hardware, Microsoft 365 licenses, AutoCAD licenses, or general office equipment for this independent-contractor position. Contractor Relationship This is a remote 1099 freelance independent-contractor relationship. Project workload will vary, and no minimum number of hours or projects is guaranteed. Our objective is to develop long-term relationships with strong freelance professionals who can become regular contributors to AEP projects as our workload continues to grow. Work will be assigned on a project or task basis, with scope, schedule, and compensation established for each assignment. To Apply Please submit your resume and briefly answer the following: • How many years of plumbing design experience do you have?, • How many years of fire-protection/sprinkler design experience do you have?, • Do you currently work as a freelancer or independent contractor?, • What types of building projects do you have the most experience designing?, • Are you able to independently develop plumbing designs from architectural backgrounds and project criteria?, • Are you able to independently develop sprinkler layouts and fire-protection design criteria?, • Do you perform sprinkler hydraulic calculations yourself?, • How familiar are you with NFPA 13, NFPA 13R, NFPA 14, and NYC plumbing/fire-protection requirements?, • What version of AutoCAD do you currently use?, • Approximately how much availability do you typically have each week?, • What hours are you generally available during the U.S. workday?, • Are you located in the United States?, • What is your typical hourly rate or preferred project-based compensation?\nCompany Description AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area. AEP Engineering, LLC is an MEP engineering consulting firm providing Mechanical, Electrical, Plumbing, Fire Protection, and Fire Alarm design services for commercial and residential building projects throughout the New York/New Jersey metropolitan area.

A global leader in supporting large-scale construction projects across infrastructure, commercial, and industrial sectors. It focuses on delivering safe, efficient, and customized systems backed by engineering expertise and on-site technical support. The ideal candidate will promote company safety initiatives and programs. The ideal candidate will support all Branches throughout North and South - overseeing New Jersey, Georgia and Florida. Essential Duties Communicate policies, procedures, and any updates to maintenance staff. Frequently inspect facilities to proactively detect potential problems and recommend the necessary repair or maintenance. Daily/Weekly inspection of performed maintenance work and machinery. Help with the development of maintenance procedures and proactive maintenance programs like preventative maintenance Ensure the correct use of PPE (personal protective equipment) as well as the replacement of the same according to the established regulations (OSHA), creating the records and physical files. Provide support during recruitment and ensure the proper onboarding and training process is conducted. Oversee and enforce good record-keeping practices. Assure that each employee receives proper training and certification annually and when needed. Investigation of Near Misses incidents to include record filing. Maintenance of Shot Blasting. Safety Meetings record filing. Travel to other branches for support (NJ, GA, FL). Other duties are instructed by the Head of Operations. $30.00 - $40.00/hr Associate or bachelor"s degree in Safety Management required. Technical training in Industrial Maintenance, Electromechanics, Industrial Electricity, Industrial Mechanics, or Mechatronics. OSHA 30-Hours Courses in General Industry. Lockout/Tagout. Machine Guarding. Hazard Communication (HazCom). Arc Flash Protection when applicable. FIT Test and Audiogram preferably. Fall Protection and Fire Extinguisher. OSHA 511 Occupational Safety and Health Standards for General Industry. Electrical NFPA 70E Safety Forklift and Powered Industrial Truck (PIT) training Certified Maintenance and Reliability Technician (CMRT) Proficient and knowledgeable in Safe Power Tool. CPR, First Aid & AED. American Welding Society (AWS) Code and Standards. Industrial Maintenance Technician Excellent verbal and written communication skills. Detail oriented and thorough. Strong analytical and problem-solving skills. Proficient with Microsoft Office Suite or related software. Time Management and multitasking skills required. Bilingual (English + Spanish) is a plus. Be able to lift up to 50 lbs. occasionally. Experience & Knowledge 3-5 years of Industrial Maintenance experience. At least 3 years driving Powered Industrial Trucks including; Forklift plus Certification. Mobile Elevating Work Platform (MEWP) including Scissor Lifts and Boom Lifts plus certification. Overhead Crane. Corrective and Preventive Maintenance experience required. Diagnosis and troubleshooting of mechanical, electrical, pneumatic, and hydraulic breakdowns/failures. Industrial Machinery, Manufacturing, or Construction. Programmable Logic Controller (PLC) knowledge. Allen Bradley or Siemens preferably. Mechanical and Electrical blueprinting reading or interpretation of Mechanical and Electrical Drawings. Mechanical Industrial knowledge to include bearing, chain, belt, speed reducer, electric motor, pump. Electric Industrial knowledge to include three-phase motos, contactors, relays, sensors, Variable Frequency Drives (VFD), reading schematics/electrical diagrams. Pneumatics, Hydraulics, MIG Drilling knowledge and proficiency. Handling multimeter, clamp meter, caliper, and micrometer knowledge and proficiency. Roller Conveyors use and training preferably Paint booth use and training preferably. Variable Frequency Drive (VFD) use and training preferably. By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job DescriptionDescription:Associated Fire Protection is seeking a skilled Fire Extinguisher Shop and Maintenance Technician to join our team. As a Fire Extinguisher Shop and Maintenance Technician, you will be responsible for performing repair, testing, maintenance, and recharge of fire extinguishers and well as assisting with maintaining the shop and office. About Us Associated Fire Protection, founded in 1947, is a leader in fire protection and life safety. We have offices located through New Jersey and New York, as well as a branch in Utah. We are seeking motivated individuals to join our growing team. While previous experience in fire protection is a plus, we are also looking for people looking to make a change to an industry that is dedicated to protecting lives and property. We are very passionate about our work, but understand that our family, friends and other interests play an important role in our lives. If you are thinking about making a change, give us a shout. Essential Functions- including but not limited to: • Perform repair, testing and recharge of fire extinguishers, as well as other types of fire protection equipment and systems as needed in accordance with NFPA, local and state codes., • Assist with deliveries, and the loading and unloading of trucks., • Maintain building and grounds cleanliness and organization on a daily basis., • Open and close shop as needed., • Pull material for jobs as required., • Perform fire extinguisher training as needed., • Assist with the installation and maintenance of both portable and fire suppression systems as needed., • Interact with customers, co-workers, vendors, and others on the job in a professional manner., • Follow safety procedures, ensuring all work is being done in accordance with safety and company policy and procedures and in accordance with code., • Communicate with customers to review work and answer any service, quality or technical questions., • Other job specific functions may be required depending on level. General Functions • This position includes a lot of interaction with customers and coworkers. The successful candidate must be able to communicate effectively and enjoy collaboration with others., • Must be able to keep appointments and show up to work on time., • Must be able to follow all safety policies and procedures., • The successful candidate should read and be aligned with company’s mission statement, vision and values., • Depending on skill level, the successful candidate must be able to manage, lead and mentor people. Requirements: Qualifications, Experience and Education- including but not limited to: • Extensive knowledge of construction best practices, equipment maintenance, and use, and OHSA guidelines is preferred., • Must be able to obtain any licenses or certifications as required in the area that you are working., • Experience working with fire protection and suppression systems is preferred., • Perform simple tasks independently., • Knowledge of local and national fire protection codes, including but not limited to NFPA., • Excellent customer service skills., • Strong problem-solving skills., • Ability to work independently and as part of a team., • Computer, phone and tablet literate., • Ability to perform physical and mental functions of the job with or without a reasonable accommodation, including but not limited to ability to lift up to 50lbs., • Must be able to pass pre-employment physical, drug screen and or any other applicable background checks or screens., • Well organized, self-motivated, flexible and a team player., • Must be able to drive to and from jobs and have a valid driver's license., • Must be able to work flexible hours and overtime as needed., • Emergency Service shifts are a requirement for this job., • Ability to work on Job sites that may include construction sites and other locations where personal protective equipment will be required, and work in confined spaces., • The position has frequent periods of stress., • Job sites may include schools, hospitals, jails, pharmaceutical companies and other companies that may require additional background checks and medical and drug screens. Benefits Offered • This position offers benefits including Medical Care, Dental Care, and Vision Care., • Competitive pay., • Paid time off (PTO) and sick leave., • Supplemental Life and Supplemental Insurance., • Flexible spending (FSA), medical, dependent care (DCA), and commuter benefits., • 401k. Work Conditions The physical efforts and working conditions are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the position, and the work environment characteristics that may encounter. This is not all inclusive and subject to change at any time. • Daily schedule may consist of work to be performed on various job sites. May be required to work outside., • May be required to work at various heights and on lifts., • Frequently works with others and has customer/public contact, occasionally works alone., • The physical requirements are described as medium to heavy., • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and vehicles., • The employee is often required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl., • Job sites may include construction sites and other locations where personal protective equipment will be required., • Job sites may include confined spaces., • The position has frequent periods of stress.DISCLAIMER: The physical efforts and working conditions are not limited to those listed in this job posting and may change at any time. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the described essential functions of the position. Additionally, the various job functions and requirements are not limited to the items listed here. Associated Fire Protection is an Equal Opportunity, including disability.

Job DescriptionHaddad Plumbing and Heating Inc. is seeking an Assistant Purchaser to join our team at our headquarters in Newark, New Jersey. The Assistant Purchaser will support the Purchasing Manager in sourcing and purchasing materials and equipment required. This role is responsible for assisting with purchase order creation, cost verification, inventory tracking, and vendor coordination to ensure materials are obtained at competitive pricing and delivered on schedule. The ideal candidate will be highly organized, detail-oriented, and eager to grow within the purchasing function while collaborating closely with internal teams and vendors. The Assistant Purchaser reports to the Purchasing and plays a key role in maintaining purchasing accuracy, material availability, and overall project efficiency. Responsibilities: • Accurately verify incoming and outgoing Purchase Orders and Packing Slips, • Track and update inventory, ensuring accurate records in Inventory Programs, • Create purchase orders, track and monitor their status, • Issue and Verify all Costs of Purchase Orders According to Project Estimates, • Create and present report on inventory levels, discrepancies, and other relevant data to Purchasing Manager, • Procure Material and Equipment by Negotiating Cost, Delivery Schedule and Terms with Vendors, • Follow up with Vendors to ensure timely delivery, • Participate in Project Meetings to Understand Delivery Schedules, • Monitor Purchasing Clerk to Ensure work is being Completed Accurately and On Time, • Meet Daily with Purchasing Manager and Purchasing Clerk to review delivery schedules, open Purchase Orders and other Items Pending, • Assist with various Purchasing Tasks as requested by Purchasing Manager Required Education and Experience • High school diploma or equivalent, • 1 Year of experience in purchasing, preferably in the Plumbing and HVAC related industry, • Exceptional organizational and follow-up skills, • Good written and verbal communication skills, • Proficiency in excel and MS word, • Attention to detailCompensation: $55,000 – $65,000 Annually Benefits Include: • Medical Insurance, • Dental Insurance, • Vision Insurance, • 401(k) Plan with Company Match, • Paid Time Off (PTO), • Paid Holidays, • Paid Vacation, • Opportunities for Career Growth and AdvancementPosition Type and Expected Hours of Work This is a Full Time Position. Days and Hours of Work are Monday through Friday, 7:00 am – 5:00 pm. Saturdays 7:00 am – 3:00 pm as Needed. About Haddad Plumbing and Heating Inc.: Haddad Plumbing and Heating Inc. is a Commercial Plumbing and HVAC company dedicated to: Providing premier workmanship and consistent delivery of reliable plumbing, heating and HVAC systems. We deliver expertise and professionalism in a competitive marketplace, using innovative techniques and tools to enhance productivity and efficiency, and meet crucial deadlines. Our ultimate goal is deliver better cost returns that will deliver greater value. When Haddad Plumbing & Heating Inc. is awarded a new construction project, our managers apply their expertise to present a comprehensive proposal that meets all requirements. Our in-house drafters then create technical designs and plans to be used by construction engineers. Project managers work closely with the general contractor and team of supervisors to ensure that the project remains on schedule without sacrificing quality work. Finally, our team of project managers with plumbing and HVAC supervisors coordinate when and how plumbing and HVAC systems are synergized and implemented. With all projects, our goal is to earn our clients’ trust to be their plumbing and HVAC contractor of choice, now and in the future. Our success is measured by achieving our clients’ vision and objectives for the project, but going above and beyond their expectations as guided by our core values. Here at Haddad Plumbing and Heating Inc., we earn this privilege with our clients by providing best-in-class service, value, and quality in every project. Powered by JazzHR OG9PrrZPxf

Job Description New Installation Foreman – Fire Sprinkler Systems Department: Installation / Field Operations Reports To: Project Manager Position Type: Full-Time Salary: $40,000 — Negotiable based on experience Position Summary The New Installation Foreman is responsible for leading the field installation of fire sprinkler systems on assigned new construction projects. Working under the direction of the Project Manager, the Foreman oversees the field crew, coordinates daily work, maintains safety and quality standards, and ensures projects stay on schedule. Key Responsibilities Lead and supervise sprinkler fitters, apprentices, and field personnel. Plan and coordinate daily installation activities. Read and follow approved sprinkler drawings, plans, and specifications. Ensure installations meet company standards and applicable codes. Monitor job progress, productivity, workmanship, and project schedule. Communicate regularly with the Project Manager regarding progress, manpower, materials, delays, and field issues. Coordinate field activities with general contractors and other trades. Identify drawing conflicts, changes, and additional work and report them to the Project Manager. Plan material and equipment needs in advance to avoid delays. Maintain accountability for company tools, equipment, and materials. Enforce company and jobsite safety requirements. Prepare work for testing and inspections and complete punch-list items. Train and mentor apprentices and less-experienced employees. Maintain a professional, organized, and productive jobsite. Qualifications 4–5 years of experience in fire sprinkler installation and new construction projects Previous foreman or lead fitter experience preferred. Ability to read and interpret sprinkler drawings and construction plans. Knowledge of fire sprinkler installation practices and applicable NFPA standards. Strong leadership, communication, organization, and problem-solving skills. Ability to manage crews and maintain project schedules. Valid driver's license and required licenses/certifications Performance Expectations The Foreman is expected to lead by example, plan ahead, maintain a safe and productive crew, deliver quality work, and communicate with the Project Manager before issues affect the project. The Foreman represents the company in the field and is expected to maintain professional relationships with customers, contractors, inspectors, other trades, and employees.

Job Description Safety Manager Location: Hudson County, NJ; Westchester, NY; Stamford, CT; Suffolk County, Long Island Salary: $120,000 – $150,000 + Medical Benefits REQUIRED: All candidates must have the NYC DOB Site Safety Manager Certificate, including the certificate number and expiration date. Company Overview Our client is a well-established general contractor specializing in ground-up mixed-use multifamily residential construction throughout New Jersey and the five boroughs of New York City. With their main office located in Harrison, NJ, they are seeking a hands-on Safety Manager to support and enforce safety standards across active job sites. Position Overview The Safety Manager will be responsible for the day-to-day implementation and enforcement of the company’s safety program across multiple construction sites. This role is highly field-oriented and will work closely with Superintendents, Project Managers, and subcontractors to ensure compliance and promote a strong culture of safety. This position reports to senior leadership and requires regular communication with both field and office teams. Key Responsibilities • Conduct regular job site safety inspections and enforce compliance with company and OSHA standards, • Identify hazards and implement corrective actions in real time, • Partner with Superintendents and Project Managers to ensure site-specific safety plans are followed, • Review subcontractor safety practices and address any deficiencies on-site, • Assist in incident investigations, including documentation and root cause analysis, • Maintain accurate OSHA logs and safety documentation, • Lead toolbox talks, site orientations, and ongoing safety training, • Monitor PPE compliance and safe work practices across all trades, • Support pre-construction safety planning as needed, • Communicate safety expectations clearly to field personnel and subcontractors, • Coordinate with third-party safety consultants when applicable Position Requirements & Qualifications • 5–10 years of construction safety experience, • Experience working on ground-up commercial or multifamily projects preferred, • OSHA 30 required; OSHA 510 a plus, • CHST, ASP, or CSP certifications are a plus (not required), • Strong knowledge of OSHA regulations and construction safety standards, • Ability to work directly in the field and interact with trades, • Strong communication and problem-solving skills, • Organized and able to manage multiple active job sites, • Proficiency in safety reporting tools and basic technology platforms, • Valid driver’s license and reliable transportation Physical & Work Environment Requirements This position requires the ability to: • Work in all weather conditions, including heat, cold, and rain, • Frequently visit active construction sites, • Climb stairs and ladders and navigate uneven terrain, • Lift and carry up to 50 pounds as needed, • Stand and walk for extended periods Equal Employment Opportunity Statement Our client is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin.

Job Description RPM Development Group is one of NJ’s leading developers of affordable housing with over two decades of experience. RPM’s success in the affordable housing marketplace is largely attributed to the high standards consistently achieved in the quality of housing we produce. We are seeking a highly motivated and experienced individual to serve as Staff Accountant who will be responsible for the monthly general ledger closing in addition to the preparation of all journal entries. Responsibilities include but are not limited to: • Monthly general ledger closing, including preparation of journal entries for 15-18 properties, • General Ledger Account Reconciliations, • Bank Reconciliations, • Reconciliation and processing of all real estate tax bills, • Internal and external reporting, • Special projects as pertains to business needs, • Providing general assistance to Accounting Department Qualifications • Accounting Degree plus 3-5 years of general ledger experience, • Knowledge of GAAP, • Proficient in Microsoft Office [Excel, Word, Outlook] Yardi Voyager and Quickbooks, • Detailed oriented and ability to consistently meet deadlines, • Property Management and/or residential construction experience a plus Compensation package includes excellent benefits and salary commensurate with experience. EOE \nCompany Description At RPM Development Group, our goal is to create high-quality affordable housing. Throughout our history this has meant developing residential communities that are affordable and serve as environments for residents and their families to thrive. Our company takes great pride in creating housing that is attractively designed, skillfully built, and well-managed. Sustainable building is one of the core values that guides our work. When affordable housing is done well, we believe that it can serve as a transformational resource for residents and a source of beauty and vibrancy for surrounding communities. At RPM Development Group, our goal is to create high-quality affordable housing. Throughout our history this has meant developing residential communities that are affordable and serve as environments for residents and their families to thrive. Our company takes great pride in creating housing that is attractively designed, skillfully built, and well-managed. Sustainable building is one of the core values that guides our work. When affordable housing is done well, we believe that it can serve as a transformational resource for residents and a source of beauty and vibrancy for surrounding communities.

Job DescriptionDescription:Associated Fire Protection is seeking a skilled Fire Extinguisher Shop and Maintenance Technician to join our team. As a Fire Extinguisher Shop and Maintenance Technician, you will be responsible for performing repair, testing, maintenance, and recharge of fire extinguishers and well as maintaining the shop and office. About Us Associated Fire Protection, founded in 1947, is a leader in fire protection and life safety. We have offices located through New Jersey and New York, as well as a branch in Utah. We are seeking motivated individuals to join our growing team. While previous experience in fire protection is a plus, we are also looking for people looking to make a change to an industry that is dedicated to protecting lives and property. We are very passionate about our work, but understand that our family, friends and other interests play an important role in our lives. If you are thinking about making a change, give us a shout. Essential Functions- including but not limited to: • Perform repair, testing and recharge of fire extinguishers, as well as other types of fire protection equipment and systems as needed in accordance with NFPA, local and state codes., • Assist with deliveries, and the loading and unloading of trucks., • Maintain building and grounds cleanliness and organization on a daily basis., • Open and close shop as needed., • Pull material for jobs as required., • Perform fire extinguisher training as needed., • Assist with the installation and maintenance of both portable and fire suppression systems as needed., • Interact with customers, co-workers, vendors, and others on the job in a professional manner., • Follow safety procedures, ensuring all work is being done in accordance with safety and company policy and procedures and in accordance with code., • Communicate with customers to review work and answer any service, quality or technical questions., • Other job specific functions may be required depending on level. General Functions • This position includes a lot of interaction with customers and coworkers. The successful candidate must be able to communicate effectively and enjoy collaboration with others., • Must be able to keep appointments and show up to work on time., • Must be able to follow all safety policies and procedures., • The successful candidate should read and be aligned with company’s mission statement, vision and values., • Depending on skill level, the successful candidate must be able to manage, lead and mentor people. Requirements: Qualifications, Experience and Education- including but not limited to: • Extensive knowledge of construction best practices, equipment maintenance, and use, and OHSA guidelines is preferred., • Must be able to obtain any licenses or certifications as required in the area that you are working., • Experience working with fire protection and suppression systems is preferred., • Perform simple tasks independently., • Knowledge of local and national fire protection codes, including but not limited to NFPA., • Excellent customer service skills., • Strong problem-solving skills., • Ability to work independently and as part of a team., • Computer, phone and tablet literate., • Ability to perform physical and mental functions of the job with or without a reasonable accommodation., • Must be able to pass pre-employment physical, drug screen and or any other applicable background checks or screens., • Well organized, self-motivated, flexible and a team player., • Must be able to drive to and from jobs and have a valid driver's license., • Must be able to work flexible hours and overtime as needed., • Emergency Service shifts are a requirement for this job., • Ability to work on Job sites that may include construction sites and other locations where personal protective equipment will be required, and work in confined spaces., • The position has frequent periods of stress., • Job sites may include schools, hospitals, jails, pharmaceutical companies and other companies that may require additional background checks and medical and drug screens. Benefits Offered • This position offers benefits including Medical Care, Dental Care, and Vision Care., • Competitive pay., • Paid time off (PTO) and sick leave., • Supplemental Life and Supplemental Insurance., • Flexible spending (FSA), medical, dependent care (DCA), and commuter benefits., • 401k. Work Conditions The physical efforts and working conditions are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the position, and the work environment characteristics that may encounter. This is not all inclusive and subject to change at any time. • Daily schedule may consist of work to be performed on various job sites. May be required to work outside., • May be required to work at various heights and on lifts., • Frequently works with others and has customer/public contact, occasionally works alone., • The physical requirements are described as medium to heavy., • While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and vehicles., • The employee is often required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl., • Job sites may include construction sites and other locations where personal protective equipment will be required., • Job sites may include confined spaces., • The position has frequent periods of stress.DISCLAIMER: The physical efforts and working conditions are not limited to those listed in this job posting and may change at any time. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the described essential functions of the position. Additionally, the various job functions and requirements are not limited to the items listed here. Associated Fire Protection is an Equal Opportunity, including disability.

Job DescriptionZabransky Mechanical CorporationLocation: Little Ferry, NJ About Zabransky Mechanical Corporation:Zabransky Mechanical Corporation is a well-established mechanical contracting company with over $25 million in annual revenue and approximately 60 employees. The company specializes in mechanical construction, installation, maintenance, and related contracting services, with a strong reputation for quality workmanship, reliability, and long-term client relationships. Position Summary:Zabransky Mechanical Corporation is seeking a highly motivated and detail-oriented Staff Accountant to support the day-to-day accounting operations of the company. This individual will play a key role in maintaining the general ledger, performing account reconciliations, assisting with month-end close, managing AP/AR activities, supporting payroll administration, and preparing financial reports for management.The ideal candidate will have a strong accounting foundation, experience working in a construction or project-based environment, and the ability to take ownership of accounting processes while collaborating closely with management and external accounting professionals. Key Responsibilities:General Ledger & Month-End Close: • Maintain and reconcile general ledger accounts., • Prepare and post journal entries., • Perform monthly, quarterly, and year-end account reconciliations., • Assist with month-end and year-end close activities., • Ensure the accuracy and integrity of financial records. Accounts Payable & Accounts Receivable: • Process vendor invoices and payments., • Manage customer invoicing and collections., • Monitor aging reports and follow up on outstanding balances., • Assist in maintaining positive vendor and customer relationships. Payroll & Compliance: • Process payroll and maintain payroll records., • Prepare and file payroll-related reports., • Assist with payroll tax compliance and year-end reporting requirements., • Maintain employee payroll documentation and records. Financial Reporting: • Prepare monthly financial reports, including:, • Profit & Loss Statements., • Balance Sheets., • Trial Balances., • Cash Flow Reporting., • Assist management with financial analysis and reporting needs. Construction Accounting & Job Costing: • Support job cost tracking and project accounting activities., • Monitor project-related expenses and allocations., • Assist with construction-specific accounting functions and reporting. Audit & CPA Support: • Maintain organized accounting records and supporting schedules., • Prepare workpapers and documentation for external CPAs and auditors., • Assist with annual reviews, audits, and tax preparation processes. Additional Responsibilities: • Maintain vendor, customer, and employee master files., • Assist with process improvements and special projects., • Support management with ad hoc accounting and financial requests. Qualifications:Required: • Associate's or Bachelor's degree in Accounting, Finance, or related field preferred., • 3-7+ years of accounting experience., • Strong knowledge of:, • General Ledger Accounting., • Journal Entries., • Account Reconciliations., • Financial Reporting., • Month-End Close., • Accounts Payable & Receivable., • Proficiency in Microsoft Excel., • Excellent organizational, analytical, and problem-solving skills., • Strong written and verbal communication skills. Preferred: • Construction industry accounting experience., • Experience with Sage accounting software., • Knowledge of job costing and project-based accounting., • Multi-state payroll experience., • Experience supporting external audits and CPA reviews., • CPA designation or CPA-track candidate a plus.

Job Description PMO Coordinator Newark, NJ $70,000 Hours: Monday–Thursday, 8:00 AM–5:00 PM | Friday, 8:00 AM–1:00 PM About the Role We are seeking a highly organized, proactive, and dependable PMO Coordinator to support the Project Manager and help keep projects moving efficiently. This role is ideal for someone who enjoys creating structure, staying ahead of deadlines, communicating across teams, and ensuring important details don't fall through the cracks. You'll work closely with the Project Manager and multiple departments to coordinate schedules, meetings, documentation, action items, and day-to-day project needs. Key Responsibilities • Coordinate meetings and scheduling across internal teams, vendors, and external partners., • Prepare and organize meeting agendas, notes, status updates, action-item trackers, and project documentation., • Maintain organized project files and tracking systems using tools such as Asana and SharePoint., • Attend project meetings, document decisions and next steps, and ensure owners are clearly identified., • Proactively follow up on outstanding action items and commitments., • Track project deadlines, milestones, and deliverables and provide timely reminders., • Assist with gathering and organizing information for project updates, budgets, timelines, and leadership reviews., • Coordinate communication between departments to help keep projects moving forward., • Identify missing information, upcoming deadlines, or administrative roadblocks before they impact progress., • Provide general project support, including data entry and document organization. Qualifications • Experience in a project coordinator, PMO support, or similar project-based role., • Strong organizational and time-management skills., • Excellent written and verbal communication skills., • Strong attention to detail and consistent follow-through., • Comfortable working in a fast-paced, deadline-driven environment., • Proficiency in Microsoft Office, including Outlook, Word, Excel, and PowerPoint., • Experience with Asana, SharePoint, or similar project-management tools is a plus., • Comfortable working with schedules, timelines, deadlines, and action-item tracking., • Ability to work independently, take initiative, and manage multiple priorities., • Collaborative and comfortable working across departments and levels of an organization. Preferred Experience • Experience supporting Marketing, Construction, IT, Operations, or other cross-functional project teams., • Familiarity with project-management concepts such as milestones, deliverables, dependencies, timelines, and scope., • Experience coordinating meetings and following up with multiple stakeholders. To apply, please email your resume to: ahuva@maiplacement.com

Job Description Summary: We’re working with a well-established consulting engineering firm in the New Jersey area that’s actively adding to their electrical team. This role is geared toward engineers and project managers with experience supporting public-sector and infrastructure-related projects, particularly within municipal or agency-driven environments. This is not a pure design-only role. They’re looking for someone who can own electrical scopes across projects, coordinate with agencies and multidisciplinary teams, and stay involved from design through execution. If you’ve worked on infrastructure, utilities, transportation, or facility-related electrical systems, this will feel familiar. Key Responsibilities: Prepare and review electrical design documents including power distribution, lighting, and system layouts Support design and coordination for infrastructure and public-sector projects (utilities, transportation, facilities, etc.) Perform electrical calculations, load analysis, and system sizing Coordinate with civil, mechanical, and structural teams across multi-disciplinary projects Interface with public agencies, clients, and stakeholders throughout project lifecycle Support permitting, approvals, and compliance with local/state codes and standards Review shop drawings, submittals, and construction documentation Assist with construction-phase support including RFIs and field coordination as needed Qualifications: 5–12+ years of electrical engineering or project management experience Background in infrastructure, municipal, transportation, or utility-related projects preferred Experience with electrical design, power distribution, and system coordination Familiarity with NEC and general public agency standards Proficient in AutoCAD (Revit is a plus) Strong communication skills — able to coordinate across teams and interact with clients/agencies PE license or working toward licensure is a plus Benefits: Full benefits (medical, dental, vision) 401(k) with company contribution PTO + paid holidays Strong backlog of public-sector work (steady pipeline, long-term stability) Opportunity to grow into a senior-level / project management role with increased client exposure

Job Description Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge and technology power our connected ecosystem of health, safety and security solutions and services. POSITION SUMMARY As an Applications Engineer, you will need to formulate an engineered estimate and or budget for new and existing clients that shall be provided by consultants, engineers, construction managers, general contractors and also from in-house Sales Representatives, Key Account Representatives and or Project Managers. SCOPE OF RESPONSIBILITY • Analyze and interpret blueprints, specifications, and scope documents for fire and security system projects., • Prepare detailed cost estimates for labor, materials, and equipment for alarm systems, CCTV, access control, and other low-voltage installations., • Conduct take-offs and identify potential value-engineering alternatives to reduce costs without sacrificing quality., • Collaborate with vendors and subcontractors to source competitive pricing., • Develop bid proposals, ensuring all required documentation is submitted on time., • Partner with sales and project management teams to ensure seamless project handoffs., • Maintain an up-to-date pricing database., • Keep current with changes in industry codes, technology advancements, and competitive practices. Qualifications • Minimum 5 years of experience estimating in the fire alarm and/or security/low voltage field., • Education BA Business/ BS Engineering/MS Engineering or applicable amount of experience in the appropriate field may be substituted for the educational background, • Strong understanding of relevant codes, including NFPA and NEC., • Ability to read and interpret detailed construction drawings and scope documentation., • Experience working with major manufacturers (e.g., Silent Knight, Firelite, Bosch, Hanwha, Avigilon, Axis, Genetec, Lenel, and others)., • High level of organization and accuracy with strong attention to detail., • Excellent communication and time management skills., • NICET Certification- Fire Alarm Systems Level III or higher, preferred., • Computer skills to include:, • MS Office, • Acrobat, • Visio, • DWG Writer, • Big Machines, • Sales Force dot com ESSENTIAL FUNCTIONS • Product selection and application (to ensure the right product is used in the right application) while maintaining adherence to Securitas’s product selection process and design standards., • Estimate installation costs in conjunction with Implementation Operations, Service Operations, Internal Labor and External Labor, • Review of Field Site Survey documents and drawings., • Supports the RFI, RFP, RFQ and RFM&S process as needed, • Create estimates and budgets for access control, intrusion, CCTV, intercom, PSIM, PLC and structured cabling systems, • Review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, detail drawings, interconnect and closet layout drawings., • Interpret specifications, addendums, revisions, sketches and Scope of work., • Work with project managers and design engineers for creating change orders on existing and ongoing projects., • Manage assigned projects and maintain deadlines for each project., • Build and maintain a good relationship with coworkers, suppliers and manufacturers., • Create a detailed list of clarifications, exclusions & compliance on a per project basis, • Knowledge of construction schedules, project meetings and how they pertain and impact the project., • Able to research product information utilizing the internet, • Excellent working knowledge of construction industry conventions, • Good understanding of workload and the requirements to maintain commitments., • Ability to navigate high value job environment for time lines, and compliance requirements, • Firm grasp of the competitive environment and strategic plays by competitors, • Excellent command and knowledge of building code requirements Securitas Technology Offers Comprehensive Benefits Including • Opportunity for annual merit pay increases, • Paid company training, • Medical, Dental, Vision, Life, Critical Illness, and Hospital Indemnity Coverage, • Company Paid Short Term and Long-Term Disability, • 401K with 60% Match up to 6% of salary, • Paid vacation, holiday, and sick time, • Educational Assistance, • Exceptional growth opportunities, • Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Job DescriptionSignature is looking to add Field Consultant for the following counties: Bergen, Union, Morris, Somerset, Passaic Are you looking for a new career that allows you to work independently, is flexible, and challenging everyday, then we have a new and exciting career for you! Get in Front of Our Recruiter Faster! To ensure your application is reviewed quickly, apply directly on our careers page: Career Site For 30 years, Signature Companies (https://signaturecompanies.com) has been the industry leader and innovator in providing quality, professional and unparalleled service to our client partners. At Signature Companies we are a High Value Insurance information provider, dedicated to superior customer service, superior quality, and superior time service. Signature Companies is looking for self-starting, self-motivated and self-directed independent contractors (1099) who are creative and knowledgeable in their field and who possess an entrepreneurial spirit to work an area of their choosing, around the area in which they live. We can provide a supplement to your current income or become your main source of income. Experience in Insurance Adjusting, Home Appraisals, Real Estate or Construction is a plus. Experience using Rapid Sketch, Xactimate, CAD or other diagramming programs will be helpful. As a Field Consultant, you will be responsible for scheduling and conducting on-site High Value Property Surveys. This involves coordinating and completing surveys within your own schedule, managing work assignments you accept and timely completion of web-based reports. You will visit properties, take photos and measurements, and make note of issues which should be brought to the underwriter’s attention. Our experienced and dedicated Field Management team will provide mentoring and support to help you learn and excel at Signature Companies. Details of position: -Work from your home office. • Professionally interact over the phone, via email, and in-person with homeowners and insurance agents., • Drive to and conduct on-site property surveys on high value homes as per customer specific guidelines and procedures., • Identify and document the construction materials/characteristics and unique features of the home., • Obtain measurements of the home and other structures on the property., • Generate an estimated replacement value of the home and identify major hazards., • Communicate the information gathered during on-site inspection in loss control 360 accessed through the Signature website Requirements Requirements and Tools needed: • Prior underwriting experience is desirable., • Prior inspection experience on residential homes is desirable., • Loss control experience desirable., • Strong oral and written communication skills, • Professionalism is key, • Construction experience desired, but not required., • BA or BS degree desired, but not required., • Must have smartphone, tablet and personal computer., • A late model reliable vehicle and Auto and General Liability Insurance., • High speed internet, Digital Camera or Smart phone with 16mp camera or greater, measuring devices such as: laser, soft tape measure, or measuring wheel.

Job DescriptionCOMPANY OVERVIEW: At F.P. Developments, Inc., we recognize that our employees are our greatest asset. We foster a supportive environment where each team member’s unique strengths and perspectives are valued. Our state-of-the-art, 25,000 sq. ft. climate-controlled facility is a hub for innovation and collaboration, empowering our team to grow both personally and professionally. For 60 years, F.P. Developments has been a cornerstone in the pharmaceutical, biotech, and medical device industries. Established in 1963, we leverage the latest technologies and good old-fashioned ingenuity to solve today’s manufacturing and compliance challenges, consistently meeting our customers' specific requirements with precision and dedication. Join us and be a part of a legacy of quality and innovation. F.P. offers full medical, dental and vision benefits as well as 401k matching, holidays and PTO. SUMMARY: As an Electromechanical field service technician at F.P. Developments, you will train and assist in the fabrication, assembly, electrical wiring, controls programming and servicing of machines and robots used in primary pharmaceutical manufacturing and hospital pharmacy compounding. You will be a self-starter, a quick learner, and open to advancement and travel opportunities. You will also participate in our innovation process, offering suggestions around new capability development. THIS POSITION REQUIRES 15-20% TRAVEL ANNUALLY DUTIES AND RESPONSIBILITIES: • Assembling machines and robots:, • Utilize electrical and mechanical blueprints and schematics to assemble large and small machinery, • Collaborate with engineering and fabrication staff to ensure high quality, durable construction, • Analyze controls programming for PLC and robot automation to troubleshoot and simplify code structure, • Servicing and refurbishing machines and robots (onsite and in the field):, • Troubleshoot and fix machine issues across mechanical, electrical and controls, • Identify and document preventative maintenance procedures for new machines, • Inspect mechanical components for wear and electrical panels for loose and missing components and recommend necessary fixes, • Replace worn or missing parts and ensure machine functionality, • Innovation support, • Research issues and recommend potential solutions, • Stay up to speed with new and emerging technologies applicable to our products, • Collaborate across engineering and fabrication departments to select and implement solutions QUALIFICATIONS: • Education:, • High school diploma or equivalent with electromechanical and controls programming experience OR, • Electrical engineering undergraduate experience, • Skills:, • Mechanical aptitude, • Basic understanding of electrical schematics/wiring, • Basic understanding of PLC programming, • Follow through and follow up, • Strong organizational skills with the ability to manage multiple tasks effectively, • Attention to detail, ensuring all tasks are completed accurately and on time., • Ability to manage time effectively and prioritize tasks in a fast-paced environment, • Strong teamwork and collaboration skills COMPETENCIES: • Customer Service: Exceptional customer service skills with a focus on clear, effective communication and responsiveness to customer inquiries and needs, • Attention to Detail: Meticulous in checking and confirming all aspects of logistics operations, including deliveries, shipments, and inventory, • Openness to Feedback: Highly receptive to feedback, seeking continuous improvement and adjusting based on input from colleagues and customers, • Teamwork: Strong team player, able to collaborate effectively with multiple departments and contribute to a positive work environmentPHYSICAL DEMANDS AND WORK ENVIRONMENT:, • Continually required to stand, walk, sit, • Continually required to utilize hand and finger dexterity, • Occasionally required to climb, balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to operate equipment, read technical information, and/or use a keyboard • Occasionally required to lift/push/carry items up to 100 pounds, • Frequently required to work near moving mechanical parts and always observe safety precautions, • Ability to travel and work independently The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Powered by JazzHR VYpHj30fSs

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. This role is onsite 5 days a week in Clifton, NJ About the Role The Safety Supervisor will be responsible for overseeing and ensuring the implementation of safety protocols and procedures within the local organization. Their primary goal is to create a safe working environment for employees and minimize the risk of accidents, injuries, and occupational hazards. The Safety Supervisor will report to the HQ Environmental Health and Safety Manager in leading the safety and health efforts within the company, by supporting the implementation and evaluation of critical safety processes, programs, and procedures to achieve goals, objectives, and continuous improvement related to compliance and injury reduction. Responsibilities • Monitor and maintain compliance with federal & state OSHA, EPA, NFPA, ANSI and other federal and state entity requirements, • Provide relevant content and subject matter expertise to support: required safety-related training; effective implementation of safety programs; and prevention of accidents, • Support site safety goals through implementation of safe work practices and coaching of employees and supervisors in safe practices, • Work in a team environment where responsibility for injury/illness prevention, compliance assurance, safety auditing, incident investigation, and employee training are shared between the leadership team and the EHS supervisor, • Work with the management team and employees to instill a genuine culture of safety awareness and personal responsibility for safe behaviors and work practices, • Assist with employee engagement efforts, including oversight of safety committees, • Provide direct support to employees within the site, with the ability to perform work activities in a variety of industrial and warehouse settings/environments, requiring activities such as, but not limited to: climbing ladders and stairs, walking and standing for long periods of time, working occasionally in hot and cold environments; and wearing advanced PPE such as fall protection and respirators and added clothing, • Daily job includes: Enforcing safety policies; Conducting risk assessments; Training and educating employees; Inspecting, auditing, and monitoring safety practices; Investigating accidents and incidents; Maintaining safety records and documentation; Collaborating with local management; Staying updated on safety regulations and best practices Qualifications • Minimum of 3 years of progressive experience in an environmental health and safety role, • Associate degree in Occupational Safety, Environmental Health and Safety, Industrial Safety, or related field, • Current OSHA 10-Hour General Industry or Construction certification, • Advanced proficiency with Microsoft Office Suite, including Excel (data analysis, pivot tables, formulas), PowerPoint (presentations, training materials), and Word (documentation, reports), • Experience and/or familiarity with related governing agency requirements (i.e., OSHA, NFPA, EPA, DOT), • Demonstrated communicating, training, public speaking and problem-solving skills, • Experience and/or familiarity with powered industrial truck driving (i.e., Forklift, Order-picker, Reach Truck, Electric Pallet Jack), • Experience supporting a Process Safety Management Program, • Knowledge of environmental regulations including but not limited to air, wastewater, storm water, solid and waste management Preferred Qualifications • Bachelor's degree in Environmental Health and Safety, Occupational Safety and Health, Industrial Hygiene, or related field, • Working knowledge of Anhydrous Ammonia refrigeration systems and associated safety protocols Benefits • Comprehensive health insurance package, including medical, dental, and vision. PPO/HMO packages, • 401k, 4% company match, • Equity and Bonus, • Vacation, sick and holiday time off, • Monthly mobile stipend, • Monthly Weee! Points credits Compensation Range • The US base salary range for this full-time position is $77,000 - $91,000, • This role may be eligible to discretionary bonus, incentives and benefits, • Our salary ranges are determined by role, level, and location The range displayed on each job posting reflects the minimum and maximum base salary for new hires for the position across all US locations. Within the range, individual pay is determined by multiple factors like job-related skills, experience and work locations. Your recruiter can share more about the specific salary range during the hiring process. Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at applicantaccommodation@sayweee.com. For more jobs and to find out more about Weee!, visit our career page: https://about.sayweee.com/careers #INDWH Softbank Vision Funds California Employee Privacy Policy Intro/FAQ 3.19.2026 Weee! Privacy Policy for California Employees Applicants Contractors (March 2026)

Job DescriptionDescription: Job Overview: The Senior Estimator is responsible for leading and overseeing the estimating department across all affiliated service lines including Sheer Service, Evo Door and Window, and AFS. This role manages the daily operations, performance, and strategic direction of the Estimating Department, including Estimators, Trade Specialists, and the Close Out Manager. The Senior Estimator is responsible for developing and enforcing standardized estimating procedures, pricing structures, scopes of work, disclaimer language, and material pricing strategies across all divisions. This position plays a critical leadership role in ensuring proposals are accurate, profitable, scalable, and aligned with client expectations and company standards. This individual serves as the primary escalation point for complex bids, high-value opportunities, scope interpretation, and profitability review while collaborating closely with Operations, Procurement, Sales, Service, and Projects leadership teams. Directly Reports To: Vice President of Operations Job Responsibilities: Department Leadership & Oversight · Oversee the daily operations and workflow of the Estimating Department, including Estimators, Trade Specialists, and the Close Out Manager. · Establish department structure, accountability standards, workflows, and performance expectations. · Conduct regular performance reviews, coaching sessions, and developmental training for department staff. · Assist in interviewing, hiring, onboarding, and disciplinary actions for estimating team personnel. · Ensure departmental alignment between Service, Projects, Distribution, and Procurement divisions. · Create departmental SOPs (Standard Operating Procedures) and maintain process documentation. Estimating & Proposal Management · Review and approve high-value, high-risk, or strategically sensitive estimates prior to client submission. · Ensure estimates align with customer expectations, contractual obligations, and company profitability goals. · Standardize estimate formatting, proposal structure, and scope-of-work language across all business entities. · Develop and maintain approved disclaimer language libraries for varying project scopes and risk levels. · Oversee material pricing structures and pricing consistency between divisions and affiliated companies. · Ensure all estimates include accurate labor assumptions, material costs, travel costs, equipment needs, subcontractor expenses, and applicable contingencies. · Collaborate with Procurement teams to maintain current vendor pricing and national market trends. · Assist with large RFPs, capital expenditure projects, rollouts, and national account bidding strategies. · Oversee estimate revisions, value engineering efforts, and pricing negotiations when needed. Standardization & Process Development • Develop standardized estimating processes across all operating companies., • Create and maintain approved estimating guidelines for labor rates, markups, trip charges, material margins, and subcontractor pricing., • Work closely with Procurement leadership to standardize material pricing and vendor utilization strategies., • Develop standardized disclaimer language to reduce organizational risk exposure., • Collaborate with Operations leadership to improve scope accuracy, field communication, and estimating efficiencies., • Assist in developing SOPs, estimating playbooks, pricing matrices, and internal training documentation. Financial & Operational Oversight • Monitor estimate profitability and margin consistency across divisions., • Analyze estimating trends, labor fluctuations, vendor pricing changes, and recurring cost impacts., • Assist leadership with forecasting workload capacity and staffing needs within the department., • Review vendor proposals and subcontractor pricing for accuracy and competitiveness., • Work closely with Accounting and Operations teams to identify estimating discrepancies impacting profitability., • Assist with strategic planning for large-scale bids, national accounts, and capital project opportunities. Key Performance Indicators: Financial & Accuracy • Estimate Accuracy: Variance between estimated vs. actual costs (Target: ±10% or better), • Gross Margin Achievement: % of jobs meeting or exceeding target margins Speed & Productivity • Estimate Turnaround Time: Average completion time aligned with SLA requirements, • On-Time Delivery Rate: % of estimates submitted within required timeframes Client Approval Rating • Proposal Approval Rate: % of proposals submitted vs approved by client Candidate Qualifications: • 7+ years of estimating experience within facilities maintenance, construction, commercial trades, or related industries., • 3+ years of leadership or departmental management experience preferred., • Strong understanding of commercial facilities maintenance operations, construction workflows, and trade coordination., • Experience estimating service work, capital projects, rollouts, and multi-site national account work., • Advanced understanding of labor burden calculations, material pricing structures, subcontractor management, and profitability analysis., • Strong knowledge of commercial trades including doors, glass, electrical, plumbing, HVAC, carpentry, and general construction preferred., • Experience developing scopes of work, disclaimer language, and standardized operational procedures., • Strong analytical and organizational skills with exceptional attention to detail., • Excellent communication, leadership, and conflict resolution skills., • Ability to manage multiple priorities in a fast-paced environment., • Proficiency in Microsoft Excel, estimating software, facility maintenance platforms, and reporting systems., • Experience with Facil IT or similar facility management software preferred., • Ability to mentor and develop high-performing teams.Requirements:

Job Description Overview A growing regional law firm is seeking an Associate Attorney to join its dedicated Community Association practice group. This position focuses on providing general counsel, governance advisory, and transactional legal services to condominium associations, homeowners associations (HOAs), and housing cooperatives throughout New Jersey. Position Details Employment Type: Full-Time hybrid position (3 days in office / 2 remote). Location: West Orange, NJ Benefits: 401(k) retirement plan and comprehensive benefits package Bar Admissions • Admission to the New Jersey Bar required, • New York and/or Pennsylvania admission preferred Key Responsibilities • Serve as general counsel to condominium and HOA boards of trustees and property management professionals., • Draft, interpret, and amend association governing documents, including Master Deeds, Declarations of Covenants, By-Laws, Rules and Regulations, and Board Resolutions., • Attend executive board meetings, annual membership meetings, and elections to provide parliamentary guidance and legal counsel., • Advise boards on statutory and regulatory compliance, including the New Jersey Condominium Act, PREDFDA, and Radburn election regulations., • Manage assessment collection workflows, including drafting demand letters, recording assessment liens, and coordinating foreclosures or payment plans., • Assist boards with developer-to-homeowner transition matters, including deficiency claims, engineering reports, and transition negotiations., • Draft, review, and negotiate vendor, service, capital improvement, and property management contracts., • Guide boards through covenant enforcement procedures, member grievances, and statutory Alternative Dispute Resolution (ADR) proceedings. Qualifications • 1–4 years of experience focusing on community association law, real estate transactions, or municipal/corporate governance., • Familiarity with New Jersey condominium law, HOA operational frameworks, and governing document interpretation., • Strong legal drafting skills with experience creating formal resolutions, policy amendments, and contracts., • Excellent interpersonal and verbal communication skills with the ability to advise volunteer board members effectively., • Strong organizational skills and the ability to manage a high volume of active association files independently.\nCompany Description Callahan & Fusco is a growing regional law firm. Its main practice areas include trucking and transportation, general insurance defense litigation, construction/construction defect, and premises liability. Callahan & Fusco is known for attaining high-profile clients and its involvement in highly publicized cases. The firm prides itself on providing large firm capabilities with small firm flexibility while maintaining long-term relationships with its clients. Callahan & Fusco is a growing regional law firm. Its main practice areas include trucking and transportation, general insurance defense litigation, construction/construction defect, and premises liability. Callahan & Fusco is known for attaining high-profile clients and its involvement in highly publicized cases. The firm prides itself on providing large firm capabilities with small firm flexibility while maintaining long-term relationships with its clients.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job Description Millwork Engineer / CAD Designer Employment Type: Full-Time Schedule: Monday-Friday, 7:00 AM-4:00 PM Work Location: On-Site Compensation: Competitive, based on experience Position Overview We are seeking a skilled Millwork Engineer / CAD Designer to join our team and support the production of architectural woodworking and millwork projects from design through manufacturing and installation. This position is responsible for taking architectural drawings and developing detailed shop drawings for review and approval by architects, general contractors, construction managers, and customers. Approved drawings are then used by our CNC operators, bench carpenters, and installation crews to bring the project to completion. The ideal candidate will have a strong command of AutoCAD combined with hands-on knowledge of woodworking, cabinetry, carpentry, or architectural millwork. Experience with CNC programming software is highly beneficial, but we are willing to train the right candidate who has the necessary AutoCAD and woodworking foundation. We are looking for someone who can work efficiently, demonstrate a sense of urgency, communicate effectively, and take ownership of their work with minimal supervision. Key Responsibilities • Draft and review detailed AutoCAD shop drawings for architectural woodworking and millwork projects., • Interpret architectural drawings, plans, and specifications and translate them into accurate, production-ready shop drawings., • Coordinate drawings and details to ensure designs are practical for manufacturing, fabrication, and installation., • Prepare CNC machine programs using CAD/CAM software such as WoodWOP, WoodCAD|CAM, and CutRite., • Coordinate with CNC operators, bench carpenters, installers, project managers, and other team members throughout the production process., • Revise drawings based on architect, customer, GC/CM, and internal feedback., • Ensure drawings and CNC programs accurately reflect project requirements and approved designs., • Identify potential fabrication or installation issues before they reach production., • Manage assigned projects and tasks efficiently while maintaining accuracy and attention to detail., • Work independently and complete assignments without requiring constant direct supervision., • Maintain a strong sense of urgency while meeting project deadlines and production schedules.QualificationsRequired, • Strong proficiency in AutoCAD., • Working knowledge of woodworking, cabinetry, carpentry, or architectural millwork., • Ability to read and interpret architectural drawings and construction documents., • Strong attention to detail and ability to produce accurate technical drawings., • Ability to work independently and prioritize multiple tasks., • Strong communication and teamwork skills., • Positive attitude and willingness to learn., • Strong work ethic and a sense of urgency.Preferred, • Experience with WoodCAD|CAM., • Experience with Microvellum / iX., • Experience with WoodWOP or CutRite., • Previous experience programming CNC machinery for woodworking or millwork applications., • Experience producing shop drawings for architectural millwork or custom woodworking projects.Education & Experience A two-year degree is not required for this position. We are primarily interested in what you can do, not simply what is listed on your résumé. Candidates who can demonstrate strong AutoCAD skills, understand woodworking and millwork, and effectively communicate within a manufacturing and construction environment will be considered. We are willing to train the right candidate on CNC programming and our specific CAD/CAM software if they already possess a strong foundation in AutoCAD and woodworking. What We're Looking For The successful candidate will be someone who: • Takes ownership of their work., • Can perform assigned tasks with minimal supervision., • Works efficiently and with a sense of urgency., • Has a strong attention to detail., • Is comfortable working in a fast-paced production environment., • Communicates well with teammates and other project stakeholders., • Has a positive, team-oriented attitude., • Is willing to learn new software and processes., • Understands that accuracy in the engineering and drafting process directly impacts fabrication, CNC production, and field installation.Compensation & Benefits, • Competitive compensation based on experience., • Full health benefits., • Paid Time Off (PTO)., • 401(k)., • Full-time, Monday-Friday schedule., • Opportunity to develop additional expertise in CNC programming, CAD/CAM, and architectural millwork engineering. If you have a strong AutoCAD background and understand woodworking or millwork, we want to hear from you. CNC programming expertise is a plus, but we are willing to train the right person.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking a highly skilled and hands-on Electrical Technician to support the Manufacturing team in the construction, installation, and testing of electrical systems for the Eos Stellarator. The successful candidate will work directly alongside Senior Power Systems Engineers, Power Electronics Engineers, and Hardware Design Engineers to bring advanced power concepts from design to reality. This role requires a versatile technician who can seamlessly transition between supporting the build of high-current power supplies, assembling electrical distribution panels, and executing the physical installation of facility infrastructure. The technician will play a critical role in the hardware bring-up, debugging, and overall electrical integration of a cutting-edge fusion energy system. Key Responsibility Areas: • Assembly & Prototyping: Build and wire power supplies, energy storage systems, custom embedded control boards, and high-current AC-DC converters for HTS magnets., • Infrastructure Installation: Support the physical installation and cabling of MV/LV switchgear, transformers, distribution panels, and Battery Energy Storage Systems (BESS)., • Facility Support: Assist in integrating auxiliary electrical systems and balance-of-plant (BoP) infrastructure, providing electrical connections for cryogenics, vacuum, cooling, and HVAC systems., • Testing & Validation: Set up testbeds and perform hardware bring-up, signal probing, and parameter optimization under staged load conditions., • Hardware Debugging: Perform board-level debugging, soldering, and rework on custom printed circuit boards (PCBs)., • Documentation: Read, interpret, and provide field markups for single-line diagrams, schematics, wiring diagrams, and cable schedules.Ideal Experience & Skillsets: Required Qualifications • Associate’s degree, trade school certification, or equivalent practical experience in Electrical Technology, Electronics, or a related field., • 5+ years of hands-on experience as an electrical technician in industrial, R&D, or high-power environments., • Proven experience building, wiring, and installing electrical distribution panels, power supplies, and control cabinets., • Strong ability to read and interpret engineering drawings, including schematics, P&IDs, and single-line diagrams., • Proficiency with lab measurement tools, including oscilloscopes, multimeters, and electronic loads., • Strong understanding of strict electrical safety standards, including LOTO protocols and NFPA 70E / NEC. Preferred Qualifications: • Experience operating in fusion, accelerator, or specialized industrial R&D environments., • Familiarity with high-voltage and medium-voltage distribution equipment (transformers, protective relays, switchgear)., • Hands-on experience with PCB rework, fine-pitch soldering, and analog/mixed-signal circuit troubleshooting., • Familiarity with mechanical integration, including cable trays, conduit bending, heat sink layouts, and cooling solutions.Tools & Platforms, • Measurement & Lab Tools: Oscilloscopes, multimeters, power analyzers, signal generators, logic analyzers, and electronic loads., • Assembly Tools: Soldering stations, crimpers, wire strippers, and general hand/power tools for mechanical integration., • Documentation: Microsoft 365, SharePoint, JIRA, and familiarity with navigating CAD outputs (AutoCAD Electrical, EPLAN).Company Benefits:, • Base Pay Range: $32.00 – $55.00 per hour (Non-Exempt / OT Eligible), • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Salary: $90-$105k base plus bonus Overview Our client is seeking a Senior Accountant to join their team in Northern NJ. Construction background is a big plus but not required. For more opportunities from KNM Resources, please visit https://www.knmresources.com/all-openings. Responsibilities • Maintain the general ledger, journal entries, reconciliations and month-end close., • Generate monthly financial statements and supporting schedules., • Resolve account reconciliation variances., • Maintain fixed asset records and depreciation schedules., • Review monthly financials for unusual trends, fluctuations, and inconsistencies., • Perform monthly variance analysis against budget, forecast, and prior periods., • Develop recurring financial reports, dashboards, and KPIs., • Compile financial data for budgeting, forecasting, and strategic planning., • Identify opportunities to improve processes., • Evaluate job cost reports for accuracy and proper allocation., • Investigate cost variances., • Assist with WIP schedules and project performance reporting., • Maintain and distribute Time & Material and Change Order pricing schedules. Qualifications • Bachelor’s degree in Accounting or Finance, • Construction background is a big plus but not required., • Strong Excel skills

Job DescriptionDescription: Title: Territory Manager Location: Remote Travel: 15-30% as needed. May include overnight stays. About AlffCo Founded in 1996, AlffCo is a leading facility and property maintenance provider. We deliver a wide range of services across the commercial facility maintenance industry, including Landscaping, Parking Lot Services, Power-Washing, Snow Removal, Electrical, Plumbing, HVAC, Refrigeration, and more. Our commitment to quality and attention to detail allows our nationwide clients to focus on growing their businesses, while we handle the continuous needs of their properties. At AlffCo, we treat our clients’ properties as if they were our own, maintaining a standard of excellence unmatched by our competitors. Position Summary As a Territory Manager (TM), employed by AlffCo, you are responsible for vendor activities and maintaining new and existing vendor and client relationships. You will identify and receive maintenance requests from AlffCo clients, understanding and interpreting the request in order to select and dispatch the proper provider or technician. Upon completion of work, TM is responsible for quality assurance and compliance documentation. onboarding suitable vendors, negotiate profitable pricing with vendors, and ensure that vendors fulfill their contractual obligations. You should be detail-oriented and adept at negotiating vendor contracts, and multitask effectively while demonstrating exceptional analytical, problem solving, and decision-making skills. The Territory Manager reports to the Regional Manager. This role requires general knowledge of facility maintenance and construction services, including but not limited to landscaping, parking lot sweeping, snow removal, carpentry, plumbing, electrical and HVAC. Key Responsibilities • Identify and research potential vendors, • Develop and sustain long term relationships with vendors., • Develop and submit proposals for new projects, keeping budgets, costs, and margins in mind, • Procure and onboard vendors while maintaining contractual documentation, • Verify vendor job completion and customer satisfaction/job approval, • Approve vendor work completion for payment, • Approve work orders for customer invoicing, • Other duties as assigned Requirements: Minimum Qualifications: • Minimum 3 years related experience and/or training; or equivalent combination of education and experience., • Experience with Service Channel is highly preferred., • 3+ years’ experience working with vendors, agreements, contracts, scopes of work., • Previous experience in vendor management, • Valid Driver’s License, • Must be 21 years old Desired Qualifications: • Associates Degree Computer Skills: Quick learning ability for new database programs, proficient navigation of various platforms (such as Service Channel, Excel, Word, Paylocity, etc.), and moderate proficiency in Microsoft Suite programs. Benefits: At AlffCo, we strive to provide you with a comprehensive and valuable benefits package as an important part of your overall compensation. Our affordable and competitive benefits include: • Medical, dental, and vision insurance, • Life and disability insurance (short and long-term), • Employee Assistance Program (EAP), • Health Savings Account (HSA) Why Join AlffCo? At AlffCo, we value leadership, innovation, and attention to detail. As part of our team, you’ll have the opportunity to work with a company that cares about its clients and employees, while enjoying the freedom to grow professionally in a dynamic and supportive environment. EEO/AA/Vets/ADA