Trabajos internal control en Cicero, New YorkCrear alertas

Job DescriptionJob Description The work involves responsibility for performing routine servicing and maintenance of automotive equipment and repairs of small engines. Under the immediate supervision of an Automotive Mechanic or Automotive Mechanic Crew Leader, an employee in this class performs various unskilled, and semi-skilled maintenance and repair of automotive equipment and small engine equipment. This classification differs from that of Automotive Mechanic in that the assigned tasks require a less extensive knowledge of mechanical systems and repair techniques. The employee may assist a more skilled or experienced mechanic in performing more difficult repair work. On routine tasks the employee works with considerable independence but is supervised directly by an Automotive Mechanic or Automotive Mechanic Crew Leader on new or difficult tasks. Maintains and repairs less complex internal combustion engines found on construction equipment propelled by gasoline and/or diesel motors. Under supervision performs, work in the repairing and overhauling of gas driven engines, transmissions, brake and exhaust systems, water pumps, generators, suspension systems, differentials and axles. Does related work as required. Typical Work Activities • Services automobiles, trucks and other mobile equipment with the proper lubricants; checks and replenishes gasoline, oil and water as needed., • Inspects and services batteries; changes oil filters; cleans air filters., • Drains and refills crank cases; checks and lubricates transmissions, differentials and rear-axle housings., • Repairs flat tires; mounts tires on wheel rims and inflates tires to recommended pressure., • Washes and polishes automobile and truck bodies., • May inspect vehicle for mechanical defects or assist an Automotive Mechanic in performing more skilled repairs and mechanical maintenance., • May perform brake inspections and replace defective parts as needed, with final inspection performed by an Automotive Mechanic., • May operate automotive equipment., • May, when assigned to a large scale operation, perform all maintenance and repairs such as replace or clean spark plugs, manually adjust or install points, install new condensers and coils, etc. on the following types of equipment: lawn mowers, chain saws, boat engines, motorcycles, gas-driven bug sprayer, cement mixers, water pumps, etc., • Maintains a written record of work performed by recording the equipment number, the work that is done the parts that are used and the part numbers., • May operate four-wheel drive and similar vehicles to plow snow when required., • Knowledge, Skills, and Abilities, • Some knowledge of general office procedures and clerical techniques., • Ability to control telephone conversation with confused, angry or distraught callers through the use of calm, controlled conversation and directed questions, • Ability to use good judgment, tact and courtesy in responding to the public on the phone or in person, • Ability to analyze problem, make decisions, whether routine or emergency, in accordance with regulations and department procedures and apply these to work situations., • Ability to speak with good diction and a clear speaking voice., • Ability to read directories, listings or codes and to write information on simple forms or P.C. keyboard., • Ability to follow oral instructions., • Ability to speak and write English. Skill in keyboard operation. Knowledge, Skills, and Abilities • Working knowledge of tools and equipment used in motor vehicle maintenance work., • Working knowledge of automotive lubricating methods., • Skill in use and care of automotive servicing tools and equipment., • Ability to determine by inspection of automotive equipment need for grease, oil, water and gasoline., • Ability to assist in making minor mechanical repairs on large engine and automotive equipment., • Ability to perform all maintenance and repair on small engine equipment., • Ability to carry out simple oral and written instructions., • Ability to keep simple written records., • Physical condition commensurate with the demands of the position.Minimum Qualifications There are no minimum qualifications for this classification. Benefits • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Vision insurance, • Retirement plan The Affirmative Action Policy of the City of Syracuse is to provide equal employment opportunity for all individuals regardless of race, color, sex, religion, creed, age (18 and over), marital status, national origin, disability, veteran status, gender identity or gender expression, sexual or affectional preference or orientation, or any other classified group within the protected class. The City also complies with 31 CFR part 51. If you have a disability for which you wish special accommodation to be made, contact the Office of Human Resources at 315-448-8780 or personnel@syr.gov. All offers of employment will be contingent on the successful completion of a background check and/or drug screen. Job Posted by ApplicantPro

Job Description Base Hourly Range: $47K-$57K Reports to – Director of Procurement Annual Bonus: Yes Direct Reports – N/A Remote: No Status – Exempt Company Website: www.schneiderequip.com ABOUT SCHNEIDER At Schneider Packaging Equipment Company, Inc. (“Schneider”), we believe innovation starts with the consumer. This approach has propelled our success in developing real-world solutions that allow us to automate the supply of life’s products. With over 50 years of industry problem-solving in end-of-line automation, Schneider is a leading manufacturer of case packing and robotic palletizing solutions. Headquartered in Upstate New York, we design state-of-the-art machinery for customers in industries such as: food and beverage, dairy, pharmaceutical, personal care, plastics, and paper. Schneider is now a part of the Pacteon family of companies. Our continued growth has allowed us to really be our Customer’s one source for end of line packaging solutions. ABOUT PACTEON Pacteon Group provides one source for best-in-class automation focused on end of line packaging solutions, providing the highest-level customer experience. Through a broad range of robotic and non-robotic equipment, ability to integrate solutions seamlessly across portfolio companies, and full sales and service coverage, Pacteon is uniquely positioned to design flexible and custom solutions for your automation needs. For more information on Pacteon, please visit www.pacteon.com . OUR CORE VALUES We believe and live our Core Values, our IPACT: Integrity Pride Accountability Customer Service Teamwork Our Pacteon Promise is “We make it right”. As our customer’s one source for end-of-line packaging solutions, everyone plays an important role to make that happen. We provide internal growth paths for our employees and support them in their professional development goals. Diversity is important to us; we are proudly an Equal Opportunity Employer striving for innovation and growth both for our employees and our Company. SUMMARY AND PURPOSE • Support Purchasing through the procurement of parts with a Concentration on Aftermarket Sales requirements to achieve customer on time delivery expectations while achieving margin improvement through strategic sourcing., • Work cross functionally as a team backup during periods of high workload or PTO, • Maintain inventory levels in support of Aftermarket Sales. KEY RESPONSIBILITIES • Review and Place Purchase Orders in Profit Key for parts in support of Site Aftermarket Sales, • Review and Cut Shop Orders in Profit Key for parts in support of Site Aftermarket Sales, • Track orders and Expedite in support of on time delivery Metrics, • Update weekly Aftermarket status in preparation for Aftermarket Weekly Meeting, • Lead Weekly Material Review of Open Aftermarket Orders, • Track Monthly delivery performance results and report., • Track and Monitor VIP parts in support of availability to ship within 48 hours of PO Entry., • Collaborate with Shop and Sub Assembly to support Aftermarket delivery Metrics, • Create New Parts and maintain Item Master as needed, • Source parts from alternate vendors and/or from alternate manufacturers as needed to support customer requirements., • Notify Aftermarket team of Obsolete and EOL (End of Life) parts, • Monitor Purchasing Inbox and follow up on tasks requiring action, • Serve as backup for Production Control Assistant and Buyers, • Support strategic initiatives for Pacteon Companies as required., • Correct Invoices as needed through Concur, • Return parts to vendors for repair, replacement, and/or credit., • Attend vendor and product training as required., • Travel required may include intercompany support, training and/or trade show support. Approximately 5%. Must maintain valid enhanced driver’s license and/or passport for travel., • Build professional skills through continued training, education, and networking events., • Perform other related duties as assigned by management. PROFESSIONAL QUALIFICATIONS • Education:, • Bachelor’s Degree in Supply Chain or 2 years of Industry Experience preferred., • Experience:, • 2 years of Industry Experience preferred., • Demonstrated success in managing customer relationships, sales proposals and communication required., • Skills:, • Strong ERP, MS Office applications software skills Required, • Ability to organize and manage multiple priorities, while demonstrating strong attention to detail, strong customer orientation and excellent phone skills for sales activity., • Strong teamwork and interpersonal skills, ability to communicate effectively both verbally and in written form., • A “Results Oriented” attitude coupled with a strong sense of accountability., • Employment Conditions:, • Valid driver’s license and acceptable motor vehicle record. PHYSICAL REQUIREMENTS & WORK REQUIREMENTS Physical Requirement Never Sometimes Frequently Sitting X Standing/Walking X Lifting/Carrying Up 10 lbs X Lifting/Carrying Upto 30 lbs X Pushing/Pulling X Keyboarding X Gross Manipulation X Fine Manipulation X Driving X Stooping X Speaking X Hearing X Near Visual Acuity X Compensation details: 47000-57000 Yearly Salary PI19c227847492-25405-42076857

Saab, Inc. is seeking a Senior Depot Specialist to join our team supporting defense products and systems deployed worldwide. The Senior Depot Specialist will provide responsive support for hardware and information needs to customers and Saab colleagues, maintain inventory and related records, coordinate vendor repairs for parts and equipment, communicate with internal and external stakeholders regarding support status and repairs, and collaborate with the team to ensure seamless, professional support to our customers. The ideal candidate will be highly motivated and possess significant experience supporting defense systems. This hands-on role requires extensive travel, sometimes on short notice, with assignments lasting longer than two months. Candidates must be able to work effectively in demanding operational environments, both independently and as part of a team. This position offers the opportunity to work with advanced defense technologies and contribute directly to mission success. Responsibilities include, but are not limited to: Work at remote depot facilities approximately 75% of the time. Receive, process, ship, and control inventory of Saab-owned and Government or Customer-owned parts and equipment. Communicate with repair vendors to support timely repair and return of equipment. Replenish inventory through Saab purchasing systems. Maintain accurate records related to inventory, parts processing, financial transactions, and repair status. Conduct physical inventories and cycle counts. Investigate and resolve inventory discrepancies. Ensure inventory accuracy and accountability. Establish and manage depot operations at new locations. Compensation Range: $34.62 - $43.27 per hour #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: High school diploma required; BA/BS in a technical discipline preferred. Must hold an active U.S. DoD Secret security clearance or higher. Must be a U.S. citizen and meet eligibility requirements for access to classified information. Applicants selected may be subject to a government security investigation. Strong military, federal, or defense contractor experience in logistics, property accountability, depot operations, and maintenance support required. The most relevant military specialties include: Army: 92A (Automated Logistical Specialist), 92Y (Unit Supply Specialist), 91X (Maintenance Supervisor). Marine Corps: 3043 (Supply Administration and Operations), 3051 (Warehouse Clerk), 0411 (Maintenance Management Specialist). Navy: LS (Logistics Specialist), Supply Corps Officer. Air Force: 2S0X1 (Supply Management), 2R0X1 (Maintenance Management Analyst), 2A6X2 (Aerospace Ground Equipment). Experience within a military S4, N4, A4, or J4 shop. Highly aligned federal civilian backgrounds include: GS-0346 Logistics Management Specialist. Contractor experience in Government Property Administration or Asset Management (GFE, GFP, IUID, FAR 45). Experience in depot or warehouse operations. Desired Qualifications: Experience with computer systems and software, such as Microsoft Excel. Forklift experience desirable. Must be capable of lifting and moving components weighing up to 50 pounds. Must demonstrate reliability, strong organizational and time management skills, and the ability to multitask and follow up on action items and requests in a timely manner. Ability to thrive in a fast-paced, distributed environment. Strong oral and written communication skills. Focus on providing quality support and accurate information. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring purpose, to help nations keep their people and society safe. Empowered by its 28,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in ten U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

✈️ Join the Superior Metals Manufacturing Team As A Summer 2027 Engineering Intern! ✈️ Location: Chittenango, NY Term: Summer 2027 (May – August) Pay: $22-$25/hr Job Type: Temporary Fulltime/Hourly (on-site) Are you a college student with a passion for engineering and a thirst for hands-on experience? Do you have a curious mind, a love for problem-solving, and the ability to think critically? If so, CPP-Superior Metals Manufacturing has the perfect internship for you! As a Summer Engineering Intern, you’ll play a key role in supporting the manufacturing of aerospace superalloys and work closely with our engineering team to improve our processes. You’ll collaborate with shop floor personnel, dive into data collection, help create clear and concise work instructions and contribute to the development of our cutting-edge processes. What You'll Do: • Work with Engineers: Assist with data collection, process trials, and developing new methods to improve operations., • Analyze & Document: Review and summarize test results, maintaining meticulous records for easy review., • Continuous Improvement: Support our drive for excellence by finding internal and external opportunities for process optimization., • Collaborate with Shop Floor Teams: Help create routings and process instructions, ensuring they are clear and up-to-date., • Technical Writing: Prepare reports and technical notes to document process improvements and solutions to challenges., • Critical Thinking: Use your problem-solving skills to assist with root cause analysis and process improvements. What We Need From You: • Education: Must be pursuing a Mechanical, Electrical (Automation), Metallurgical, Materials, or Chemical degree from an accredited program - with at least 2 years of coursework under your belt., • Skills: You know your way around Microsoft Office and are eager to learn., • Interpersonal Skills: You can communicate clearly and collaborate effectively with engineers and shop floor personnel., • Team-Oriented Mentality: You’re ready to work as part of a team, contributing your ideas and learning from others to achieve shared goals., • Physical Requirements: Ability to handle light lifting (up to 50 lbs) and stand or walk for about half of your workday., • Drive: You have an enthusiasm for engineering and a willingness to dive into real-world challenges. Perks of the Job: • Real-World Experience: Get hands-on experience in metallurgy and mechanical engineering, working directly with the best in the industry to solve real challenges., • Sky’s the Limit Growth: Not just an internship – it’s a chance to grow! Your ideas will make an impact as you help us innovate and improve manufacturing processes., • Collaboration & Mentorship: Work closely with experienced engineers who are invested in your development, and gain valuable insights that will shape your career., • Epic Networking Events: Get ready for unforgettable team-building activities, social mixers, and fun networking events that will help you make lasting connections while having a blast., • Cool Work Environment: Enjoy a great mix of shop floor action and a comfortable, climate-controlled office – no dull days here!, • Work-Life Balance: You’ll have the flexibility to enjoy your summer while gaining industry experience. Working Conditions: • Will be in areas with high heat and dust, but also will have a comfortable, well-lit, climate-controlled setting., • Some physical activity, including walking, standing, and occasional lifting. If you’re ready to take your engineering knowledge from the classroom to an aerospace parts manufacture, Superior Metals Manufacturing - CPP is the place for you! Apply today and start building your future with us! Learn More about Consolidated Precision Products: _ CPP-Superior Metals Manufacturing is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Superior Metals Manufacturing, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations. This is a non-management position This is an internship position Pay Range: $22-$25

Quality Engineer If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Consolidated Precision Products (CPP) Syracuse is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. For more information, please visit _ WHAT WE HAVE TO OFFER • Comprehensive Benefit Plans, • Quarterly Bonus Opportunity, • 401k with Company Match, • Emphasis on Employee Engagement, • Paid Holidays and Vacation Time, • Tuition Reimbursement JOB SUMMARY • Work cooperatively in a team environment to support development of robust manufacturing processes and quality systems to support the company’s growth in the industrial and aerospace investment casting markets., • Gather, interpret, and audit data to determine acceptance of product to customer specifications (internal and external)., • Identify/define problems; perform root cause analysis, and support solution implementation to address problems that affect yield, rework, and overall quality of the product using a standardized approach (PDCA, Six Sigma, …), • Take a leadership role in resolving cross-functional problems. PRIMARY RESPONSIBILITIES • Develop, maintain, and advance CPP quality systems, procedures, and practices., • Develop and document quality work procedures and processes., • Review contracts for adherence with CPP standards and practices., • Interact with CPP NDT level III personnel to ensure product compliance., • Oversees conformance and quality enforcement of casting manufacturing process., • Routinely audit production lots for adherence to established techniques and to ensure the repeatability of the results., • Manage resolution of non-conforming material/processes., • Support the identification of process yield issues using various data analysis techniques (statistical, mathematical, DOE, 6 Sigma, etc.) to uncover variables in the process that are not maintained in a controlled fashion., • Communicate with customers to resolve/address quality system concerns/inquires., • Participate during customer/external audits including preparation, guidance and closure., • Drive closure of preventative/corrective actions, customer returns/inquires., • Actively participates in Continuous improvement of process/product such that castings meet or exceed customer expectations., • Coordinate with engineering team the applicable qualification documentation and data submittal packages., • Review quality shipment documentation including certificates of conformance and other quality audit checklists., • Supervise and verify the accuracy of gage R&R studies, process capability, SPC, correlation and other data related statistical activities., • Work closely with other departments to ensure organization objectives are achieved., • Use problem solving tools and techniques to increase profitability., • Maintain a positive work atmosphere with respect and communication in a professional manner. QUALIFICATIONS • Education: BS in Engineering Discipline or 7-10 years of applicable experience., • Experience: Quality systems, and/or formal training in Quality tools., • Certifications/Licenses: CQA or CQ Engineer preferred., • Other Required Knowledge, Skills & Abilities: Basic engineering skills. Knowledge and application of statistics. Knowledge of computer applications. Knowledge of raw materials, production processes, quality control, costs. Quality system and problem solving skills. Able to interpret customer drawings, specifications, reports and basic working knowledge of GD&T. Good written communication skills. Good verbal communications with all levels of CPP management and manufacturing. Familiar with FMEA, Control Plan and PPAP documentation WORKING ENVIRONMENT • Working Environment: Office Environment with frequent activity in the factory., • Physical Demands: Sitting/standing for extended periods of time, able to lift up to 20 lbs, extended periods of time using a computer screen., • Travel Requirements: Occasional., • Required PPE: Check for required PPE in areas you may be working., • Safety Glasses and Steel Toed Shoes: Needed in all areas of the plant. Pay Range, • $75,000.00 - $95,000.00 NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a non-management position This is a full time position Pay Range: $75,000 - $90,000

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #4379, located at:2380 Erie Boulevard East, Syracuse, NY 13224 At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: _ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at _. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistent with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation, • If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal, • If internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current position Preferred Qualifications:, • Have a valid, unrestricted Driver’s License, • Have at least a High School diploma or GED, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint-related products, • Have previous work experience operating tinting and mixing equipment, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store’s sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s customers, staff, employees, vendors, contractors, and the general public. The individual selected for this role will be expected to work at Store #4379, located at:2380 Erie Boulevard East, Syracuse, NY 13224 This position is eligible for health benefits, such as medical, dental and vision coverage, Flexible Spending Accounts (FSAs), disability coverage, security, retirement and saving benefits, and more. Additional benefits include a generous time away from work package, including personal leave, paid parental leave, medical leave, vacation, holidays, among other benefits. For more information about our benefits, visit http://www.myswbenefits.com/ At Sherwin-Williams, our purpose is to inspire and improve the world by coloring and protecting what matters. Our paints, coatings and innovative solutions make the places and spaces in our world brighter and stronger. Your skills, talent and passion make it possible to live this purpose, and for customers and our business to achieve great results. Sherwin-Williams is a place that takes its stability, growth and momentum and translates it to possibility for our people. Our people are behind the strength of our success, and we invest and support you in: Life … with rewards, benefits and the flexibility to enhance your health and well-being Career … with opportunities to learn, develop new skills and grow your contribution Connection … with an inclusive team and commitment to our own and broader communities It's all here for you... let's Create Your Possible What is the Process to get Started? Step 1 – Online Application Find the role(s) that interest you on our Careers page: _ Set aside 15 minutes to create your profile by entering or importing your details from one of our job board partners Step 2 – Digital Interview Upon review of your application, qualified candidates will be invited to complete a digital video interview via HireVue, our interview partner. The interview will consist of a few behavioral based questions You’ll be able to record and complete your video interview anytime, anywhere! While you can complete this video interview on your own schedule, we ask that this step be completed within 7 days of receiving an invitation Step 3 – In-Store Interview Your video interview is reviewed by a member of our Recruitment team and our top candidates are invited to meet with our team in a store, specialty wholesale branch, floorcovering facility or delivery service terminal. At Sherwin-Williams, part of our mission is to help our employees and their families live healthier, save smarter and feel better. This starts with a wide range of world-class benefits designed for you. From retirement to health care, from total well-being to your daily commute—it matters to us. A general description of benefits offered can be found at _. Click on “Candidates” to view benefit offerings that you may be eligible for if you are hired as a Sherwin-Williams employee. Compensation decisions are dependent on the facts and circumstances of each case and will impact where actual compensation may fall within the stated wage range. The wage range listed for this role takes into account the wide range of factors considered in making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. The wage range, other compensation, and benefits information listed is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable federal, state, and local laws including with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act where applicable. Sherwin-Williams is proud to be an Equal Employment Opportunity employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status or any other consideration prohibited by law or by contract. As a VEVRAA Federal Contractor, Sherwin-Williams requests state and local employment services delivery systems to provide priority referral of Protected Veterans. Please be aware, Sherwin-Williams recruiting team members will never request a candidate to provide a payment, ask for financial information, or sensitive personal information like national identification numbers, date of birth, or bank account numbers during the application process. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistently with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must have a valid, unrestricted Driver’s License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodation, • If internal to Sherwin-Williams, you must have received at least a “meets expectations” (3) rating on your most recent performance appraisal, • If internal to Sherwin-Williams, you must have completed all HR Cloud eLearning courses required for your current position Preferred Qualifications:, • Have at least a High School diploma or GED, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint-related products, • Have previous work experience operating tinting and mixing equipment, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish

Job DescriptionDescription:Material handlers process orders by using technical drawings and other required communication. They pull and move parts throughout the manufacturing facility. Using either manual labor or other equipment such as trucks or forklifts MONDAY-FRIDAY 6am-2:30pm or MONDAY-THURSDAY 1pm-11:30pm Shifts Available ABOUT JAQUITH INDUSTRIES: Jaquith Industries is a family-owned manufacturing company committed to delivering high-quality products, exceptional customer service, and a safe, team-oriented work environment. We take pride in our craftsmanship, reliability, and the long-term relationships we build with our employees and customers. At Jaquith Industries, we believe our people are our greatest asset, and we are dedicated to providing opportunities for growth, stability, and success. We are looking for motivated individuals who value teamwork, dependability, and continuous improvement. If you're seeking a rewarding career with a company that values its employees and invests in their future, we'd love to hear from you. BENEFITS: Jaquith Industries offers a competitive benefits package, including: • Health Insurance - 75% Employer Covered, • Life Insurance, • 401(k) Retirement Plan, • 401(k) Automatic 3% Match, • 80 Hours of Paid Time Off (PTO), • 40 Hours of Paid Sick Time, • 11 Paid Holidays per Year, • Up to $700 Annual Reimbursement for Eligible Dental and Vision Expenses, • Stable, Long-Term Employment Opportunities, • Overtime is Available, but Not Required, • Supportive Team Environment Join a company where your hard work is valued and your contributions make a difference every day Department - 101 Laser, 104 Packing & Towers, 102 Fabrication ESSENTIAL JOB FUNCTIONS: • Keeping a well-maintained area and updated account of parts., • Collaborating with internal departments to locate missing parts, fix incorrect orders and replace damaged products., • Read and interpret measuring devices., • Verifying the accuracy of quantity and quality of Laser & Plasma cut parts., • Labeling every product and placing them according to locations., • Perform daily Lift truck inspections., • Keep Supervisor informed of any problems., • Adhere to established safety rules and policies., • Notify supervisor or safety director of any unsafe act or practice stopped., • Keep work area neat and orderly on a daily basis., • Follow quality control standards to ensure meeting quality and quantity requirements., • To maintain continuous movement of work, use hand truck, lift truck, or overhead crane to move work to and from designated storage, staging areas or workstation., • Perform other duties as assigned Requirements:, • High school diploma or general education degree (GED) or 3 years work experience., • Practice good oral and written communication skills., • Participate in training events (ie; Lockout/Tagout; HazCom; and bloodborne pathogen), • Treat all co-workers with dignity and respect., • Practice solid attention to detail and problem-solving, • Possess basic math skills., • Possess excellent organizational skills., • Maintain positive attitude EQUIPMENT LISTING (MACHINES, TOOLS & SOFTWARE): Will also be expected to use computer to enter information and review reports. Must have experience with, or be able to learn to use warehouse machinery including forklift, pallet jack, and measuring tools.

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description The Logistics Attendant is responsible for coordinating and executing material movements, receiving, shipping, and warehouse functions across the organization. This role is essential to the company’s customer experience by ensuring timely and accurate supply of materials to internal departments and external customers. The Logistics Attendant supports interdepartmental communication, collaborates with outside operations, and maintains a high level of accuracy and service throughout all logistics workflows. The primary purpose of this position is to receive, evaluate, stock, ship, and manage materials from receipt through consumption or sale, ensuring seamless flow and operational continuity. Essential Job Duties Receive and process incoming materials from receipt through stocking, ensuring accuracy against purchase orders and packing slips. Verify, inspect, and document incoming goods for quality, quantity, and compliance with specifications. Establish and maintain storage locations, ensuring proper rotation and organization of inventory in warehouse and production areas. Safely operate material-handling equipment (forklifts, lift trucks, pallet jacks, VLMs) to transport materials and navigate narrow aisles. Stock materials in high-bay racking and vertical lift modules (VLMs), consolidating and securing inventory to maximize storage efficiency. Accurately pick and stage materials for production, Kanban replenishment, and internal orders, ensuring timely delivery to designated areas. Follow packaging and labeling guidelines to ensure the safety, compliance, and integrity of all outbound shipments. Manage internal consumption and replenishment of packaging materials. Operate packaging equipment such as shrink wrappers, banders, and stretch wrappers to prepare goods for shipment. Organize, build, and secure consolidated deliveries, ensuring proper documentation and traceability of all materials. Process and prepare domestic, international, dangerous goods, and freight shipments, following all regulatory and carrier requirements. Collaborate closely with Order Management, Finance, and Logistics teams to ensure on-time shipment, accurate documentation, and high levels of customer satisfaction. Basic Job Skills Strong computer and process skills; proficiency in SAP, Excel, and Microsoft Office applications is highly recommended. Demonstrated ability to manage time effectively and maintain a strong sense of urgency. Capable of meeting deadlines and performing well under pressure in a dynamic environment. Able to work both independently and collaboratively within a team setting. Skilled in the safe and efficient operation of warehouse equipment (e.g., forklifts, pallet jacks, VLMs, and material handling tools). Qualifications Education and/or Experience High School Diploma or GED and 0-2 years relevant experience Certifications/License Capable of Forklift Certification Physical Requirements Require constant (5-8 hours/day) lifting and carrying up to 50 pounds on a daily basis. Requires frequent (2-5 hours/day) pushing up to 50 pounds, sustained visual concentration on small areas and repetitive hand motions on a daily basis Requires occasional (up to 2 hours/day) bending, crawling, crouching, climbing, sitting, kneeling, reaching on a daily basis Frequently sustained visual concentration on small areas (e.g. monitors, screens, spreadsheets, legal documents, etc.) Additional Information A reasonable estimate of the current range is: $19-$22 per hour. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). The actual compensation will be determined based on experience, location, and other factors permitted by law. INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job Description Bluefors Cryocooler Technologies, Inc. is looking for a detail-oriented and highly organized Shipping Coordinator to join our team in Syracuse, NY. In this role, you will play an important part in ensuring that customer orders and service shipments are packaged accurately, documented properly, and delivered on time. You will work closely with Production, Test Room, Shipping, Customer Service, Sales, Service, Quality Control, Compliance, Accounting, customers, freight carriers, and customs brokers. If you enjoy coordinating multiple priorities, solving problems, and making sure the details are right, this is an excellent opportunity to contribute to a growing and innovative organization. Interested? Keep reading! Your responsibilities will include coordinating all shipments of sales and service orders from Bluefors Cryocooler Technologies, Inc. You will receive customer orders from Production and verify that quantities, labeling, packaging, and other shipment requirements are accurate before orders leave the facility. You will prepare and maintain shipping labels and documentation, including packing lists, invoices, bills of lading, and customs forms. You will communicate with freight carriers and transportation providers to obtain freight quotations and coordinate shipment pickups and deliveries. You will provide internal and external customers with timely shipment updates and tracking information while proactively identifying and resolving discrepancies or other shipping-related issues to minimize delays. For international shipments and receipts, you will work with customs brokers and relevant authorities to support smooth customs clearance. You will coordinate daily packaging and shipping schedules with Production, Quality Control, Compliance, Sales, and Service teams, confirm customer payment status with Accounting when necessary, notify customers when shipments are ready or have been dispatched, and assist Sales and Service teams with freight quotations for new customer orders. You will also perform other duties as assigned to support the team and the organization. We are looking for someone who is organized, dependable, detail-oriented, and comfortable managing multiple priorities in a fast-paced environment. You should have a high school diploma or GED, along with two to three years of related experience and/or training, or an equivalent combination of education and experience. The ability to read and interpret safety rules, operating and maintenance instructions, procedures, training materials, and other workplace documentation is important. Strong time-management, organizational, interpersonal, written, and verbal communication skills are essential, as is the ability to work effectively with both internal and external customers. Proficiency with Microsoft Office and general computer skills is required. You should demonstrate strong attention to detail, accountability, adaptability, teamwork, continuous learning, and a commitment to safety. The ability to follow established procedures, communicate professionally, maintain confidentiality when appropriate, and work collaboratively across departments will be critical to your success. You must also be comfortable working in both an office and manufacturing environment and able to meet the physical demands of the position. Excellent command of English, both written and spoken, is required. We also appreciate candidates who bring experience coordinating freight shipments, working with transportation providers or freight forwarders, preparing international shipping or customs documentation, or supporting logistics operations in a manufacturing environment. Experience working with customs brokers, obtaining freight quotations, tracking shipments, or resolving shipping discrepancies would be beneficial. Candidates who demonstrate a proactive approach to problem-solving and a genuine commitment to accuracy, communication, teamwork, dependability, adaptability, and continuous improvement will stand out. We value individuals who contribute positively to an inclusive workplace, support their colleagues, take ownership of their responsibilities, and consistently promote a safe and professional working environment. We offer you an interesting, challenging, and responsible position, along with the support of a highly skilled and growing organization. This is an excellent opportunity for your professional growth in a dynamic, enthusiastic, and collaborative team where we work together and support each other. We foster a multicultural work environment with room to grow, where you can use your potential and further develop your skills. Main responsibilities: · Coordinate all sales and service shipments from Bluefors Cryocooler Technologies, Inc., ensuring orders are prepared accurately and shipped according to customer requirements. · Receive customer orders from Production and verify quantities, labeling, packaging, and shipment readiness. · Prepare and maintain shipping labels and documentation, including packing lists, invoices, bills of lading, and customs forms. · Obtain freight quotations from carriers and transportation providers and coordinate shipment pickups and deliveries. · Communicate shipment status and tracking information to internal and external customers. · Proactively identify, investigate, and resolve shipping discrepancies and other issues to minimize delays. · Coordinate with customs brokers and relevant authorities to facilitate customs clearance for international shipments and receipts. · Work with Production, Quality Control, Compliance, Sales, and Service teams to establish and maintain daily packaging and shipping schedules. · Confirm customer payment status with the Accounting department as needed before shipments are released. · Notify customers of completed shipments and provide appropriate tracking information. · Assist Sales and Service teams with obtaining freight quotations for new customer orders. · Perform other duties as assigned. What we expect from you · High school diploma or GED, with two to three years of related experience and/or training, or an equivalent combination of education and experience. · Strong organizational and time-management skills, with the ability to prioritize and coordinate multiple shipments and deadlines. · Excellent attention to detail and accuracy when preparing orders, labels, shipping documents, and customs paperwork. · Strong verbal and written communication skills and the ability to interact professionally with customers, carriers, freight forwarders, customs brokers, and internal departments. · Proficiency in Microsoft Office and general computer applications. · Ability to read and interpret safety rules, operating and maintenance instructions, procedure manuals, training documents, and other written procedures. · Demonstrated dependability, adaptability, teamwork, accountability, and willingness to continuously learn and develop new skills. · Ability to proactively identify problems, take appropriate action, and follow established procedures to resolve issues. · Commitment to maintaining a safe work environment and following required safety procedures and PPE requirements. · Ability to work effectively in both office and manufacturing environments. · Excellent command of English, both written and spoken. · Ability to meet the physical requirements of the position, including lifting and moving materials as required. We also appreciate · Previous experience in shipping, logistics, transportation, freight coordination, manufacturing, or a related field. · Experience working with freight carriers, freight forwarders, customs brokers, or international shipments. · Familiarity with freight quotations, shipment tracking, bills of lading, commercial invoices, packing lists, and customs documentation. · Experience coordinating activities across multiple departments in a manufacturing or technical organization. · Strong problem-solving skills and a proactive approach to identifying and resolving shipping issues. · A customer-focused mindset and the ability to maintain professional relationships with internal and external customers. · A collaborative, team-oriented approach and a willingness to support colleagues and contribute to shared goals. · A commitment to accuracy, continuous improvement, adaptability, inclusion, dependability, and workplace safety. Physical demands While performing the duties of this job, the employee is frequently required to stand, walk, reach with arms and hands, and use hand and finger dexterity. The employee is also frequently required to stoop, kneel, crouch, crawl, and talk or hear. The employee must regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 50 pounds. Specific vision abilities required include close, distance, and peripheral vision, depth perception, and the ability to adjust focus. Work environment This role operates in a manufacturing environment and interacts primarily with internal customers in a professional, courteous, and cooperative manner. Required personal protective equipment (PPE) must be worn as applicable. The employee is frequently exposed to moving mechanical parts and may occasionally be exposed to humid conditions, fumes or airborne particles, heat, cold, risk of electrical shock, and vibration. The noise level may be moderately loud at times. We offer a generous benefits package including health, dental, vision, 401(k), long- and short-term disability, life insurance, training, tuition reimbursement, vacation, and Paid Time Off (PTO). Location: Syracuse, NY Pay range: $22.00-$26.50 per hour (DOE) Note, that this role does not offer sponsorship for work authorization. Bluefors Cryocooler Technologies, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration regardless of disability status, veteran status, or any other New York State or federally protected characteristic.

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description Position Overview This position drives the employee experience, leading operational excellence across the employee lifecycle, ensuring compliance and process integrity, and supporting scalable people programs aligned with business objectives. The People Operations Manager will have one direct report (Generalist) on the People & Culture (P&C) team. Key Responsibilities HR Operations & Compliance Oversee end-to-end employee lifecycle processes, including onboarding, internal transitions, and offboarding Ensure compliance with federal, state, and local employment laws and regulations Oversee immigration processes, partnering with legal counsel and external vendors to ensure timely filings, documentation accuracy, and regulatory compliance Maintain and update P&C policies and ensure consistent application across the organization Provide oversight of benefits administration and leave management functions, ensuring accurate, compliant, and timely service delivery Identify operational efficiencies and continuously improve P&C operational processes Compensation & Benefits Lead the compensation benchmarking and annual salary review cycles Oversee benefits programs and manage relationships with brokers, and carriers to ensure competitive and cost-effective offerings Monitor internal equity and external market competitiveness, recommending adjustments as needed. Support the design, implementation, and communication of new or updated compensation and benefits programs Analyze benefits utilization and employee feedback to identify opportunities for improvement Ensure compliance with all benefits-related regulations, including ACA, ERISA, and other relevant federal, state, or local requirements Provide data-driven insights and reporting to leadership to inform compensation and benefits strategy Talent Acquisition & Workforce Management Oversee and manage the organization’s RPO (Recruitment Process Outsourcing) partnership to ensure high-quality, timely hiring outcomes Partner with hiring managers and the RPO team to forecast staffing needs and align recruiting strategies with business priorities Monitor recruiting metrics (e.g., time-to-fill, quality of hire, cost-per-hire) and hold the RPO accountable to established performance standards and SLAs Continuously evaluate and optimize hiring processes to enhance candidate experience and employer brand Contribute to long-term workforce planning and succession strategy initiatives Employee Relations Ensure People & Culture policies and procedures are consistently applied and clearly communicated across the organization Direct employee relations matter to the P&C Business Partner(s) for review and resolution Maintain appropriate documentation and tracking of employee relations cases Monitor trends and provide high-level reporting to the VP of People to support compliance and risk mitigation Support policy updates and internal communications to reinforce fair, compliant, and consistent workplace practices Qualifications Bachelor’s degree in Human Resources, Business Administration, or related field 5+ years of progressive HR experience, including people management or formal team leadership responsibility SHRM-CP, SHRM-SCP, HRCI PHR, HRCI SPHR, or equivalent credential; or ability to obtain certification within one year of employment. Proven experience partnering with senior leaders and cross‑functional stakeholders to drive people initiatives and organizational outcomes Strong working knowledge of employment law, compliance, and HR best practices Hands‑on experience with HRIS platforms (e.g., Workday, ADP, UKG, or similar), including system administration, process optimization, data integrity, and reporting Demonstrated ability to leverage HR data, dashboards, and people analytics to inform decisions and improve employee experience Excellent communication skills, sound judgment, and strong problem-solving capabilities Proven ability to coach, develop, and mentor People & Culture team members in a fast‑paced, evolving environment Additional Information The expected salary range for this position is between $110,000 and $130,000 annually. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10%. The actual compensation will be determined based on experience, location, and other factors permitted by law. INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Senior Accountant - Aerospace Manufacturing If you would love to be part of a company that is poised for substantial growth with opportunities for career advancement, then working for CPP may be the right fit for you! Join a results-oriented workplace that strives for success through innovation, collaboration, and teamwork. Pay Range: $80,000 - $110,000 Consolidated Precision Products (CPP) is currently seeking a Senior Accountant to join our Accounting and Finance Team. This position reports directly to the Site Controller at our plant in Chittenango, New York. The position plays a key role within the finance function of the organization. It will provide an opportunity for growth so the individual will be ready to assume a controllership role within a five-year period. The position requires the candidate to have a minimum of three to four years of combined experience, in both general ledger and cost accounting and in a manufacturing setting. A strong understanding of the manufacturing business cycles and controls is required. Having any public accounting experience is also a plus. The role will require the individual to work in a fast-paced environment and have strong analytical and organizational skills. WHAT WE OFFER • Weekly Pay for Hourly Employees, • Comprehensive Benefit Plans, • Quarterly Bonus Opportunity, • 401k with Company Match, • Emphasis on Employee Engagement, • Paid Holidays and Vacation Time, • Tuition Reimbursement, • Opportunities for Advancement Major Responsibilities • Work directly with the site controller to assist in various requests from both the local operations and corporate finance teams (e.g., ad hoc analysis, special reporting, training)., • Assist and work with the financial accounting shared services team in the month-end closing process., • Prepare and update the site’s weekly cash forecasts (e.g., receipts and disbursements)., • Monitor weekly the accounts receivable aging and lead weekly meetings with the both the local customer service and financial shared services teams to coordinate collections., • Prepare various daily/weekly reconciliations (e.g., sales, cash). Review month-end balance sheet reconciliations prepared by the financial accounting shared services team., • Participate and help to organize the annual physical inventory and other cycle count programs., • Assist in preparing for the annual standard cost update, including new product costings, and ensure proper inventory valuation., • Assist in managing the site’s annual external audit including review/preparation of audit material, coordinating site visits with external auditors, and responding to external auditor inquiries., • Ensures the company’s financial and accounting policies are understood and consistently applied. Qualifications • Bachelor’s degree in Accounting or Finance; operations experience a plus., • 3-4 years of direct experience leading accounting practices in a manufacturing environment, preferably aerospace, must have in-depth understanding of cost accounting and manufacturing costing methodologies., • Working knowledge of US GAAP, FASB standards and internal control processes and procedures., • Experience developing and implementing strategic and tactical financial plans, and developing, implementing and analyzing key indicators of plan achievement., • Ability to multi-task and manage often conflicting priorities effectively displaying strong organizational and time management skills., • Proficient in Microsoft tools and experience with ERP Systems (Oracle/SAP background is preferred), • Outstanding PC skills and ability to quickly analyze rapidly changing circumstances and provide sound financial advice. About Us Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large “function critical” products. CPP provides its customers with a “total solution” source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position Pay Range: $80,000- $110,000

Job Description • We are hiring immediately for full time COOK positions., • Location: The Willows Inpatient by Eurest - 847 James Street, Syracuse, NY 13203 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: At least 2 years of scratch cooking experience required. *Internal Employee Referral Bonus Available • Fixed Pay Rate: $20.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1566208. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Prepares food in accordance with applicable federal, state and corporate standards, guidelines and regulations with established policies and procedures. Ensures quality food service is provided at all times. Essential Duties and Responsibilities: • Prepares high-quality food items according to standardized recipes and instructions to meet production, delivery and service schedules., • Serves meals or prepares for delivery by using correct portioning, meeting outlined standards, ensuring that food is at the correct temperature and is attractive and tasty. Tastes all prepared food items., • Uses established ticket collection procedures during service. Responsible for records from area worked during service periods., • Cleans kitchen after preparation and serving, maintaining high standards of cleanliness. Stores or discards excess food in accordance with safe food-handling procedures., • Keeps refrigerators and storerooms clean and neat. Ensures food and supply items are stored per standards., • Operates and maintains kitchen equipment as instructed., • Assists in production planning, record keeping and reporting as required., • Assists in the ordering and receiving of all food and supplies as required., • Reports needed maintenance, faulty equipment or accidents to the supervisor immediately., • Attends in-service and safety meetings., • Maintains good working relationships with coworkers, customers, administrators and managers., • Performs job safely while maintaining a clean, safe work environment., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. Req ID: 1566208 [[req_classification]]

Job Description • We are hiring immediately for full time COOK SUPERVISOR position., • Location: The Willows Inpatient - 847 James Street, Syracuse, NY 13203 Note: online applications accepted only., • Schedule: Full time schedule. Days and hours may vary. More details upon interview., • Requirement: At least 5 years of kitchen experience required. *Internal Employee Referral Bonus Available • Fixed Pay Rate: $22.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1589752. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Eurest is recognized worldwide for standards of service and excellence within the foodservice industry. Embracing an ownership mindset, Eurest leverages global resources, promotes a local presence and enriches the communities we serve. The Eurest Promise, “connect with people, inspire through food, create solutions, and live our promise,” is exemplified throughout our organization. Eurest is proud to serve the world’s most respected successful corporations, including many of the Fortune 500. Job Summary Summary: Directly supervises food-service associates in accordance with policies, procedures and applicable laws. Essential Duties and Responsibilities: • Trains employees; plans, assigns and directs work; appraises performance; rewards and disciplines associates; addresses complaints and resolves problems., • Advises management of purchasing requirements with a focus on minimizing waste and avoiding product shortages., • Uses approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Operates and cleans equipment in accordance with department procedures after each use., • Stores, labels and dates food items according to policy; maintains established food rotations in storage in order to minimize spoilage and waste., • Follows HACCP guidelines to ensure quality and safety of food supply., • Operates food-service equipment in a safe manner and according to established policies and procedures., • Helps serves meals; remains present during scheduled meal periods to receive customer comments and feedback., • Performs other duties as assigned. Associates at Eurest are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyEurest.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Eurest maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID: 1589752 [[req_classification]]

Join Our Team as a Manufacturing Manager!!! Consolidated Precision Products (CPP) is an investment casting foundry that specializes in complex aerospace & gas turbine components. With a stable business model and competitive compensation & benefits, CPP is a great option to consider as you look to make your next career move. We offer: Innovative Environment: Work in a world class investment casting site supporting the aerospace and industrial gas turbine industry. Collaborative Environment: Work alongside dedicated professionals in a supportive, team-oriented setting. Growth Opportunities: Be part of a company that values continuous improvement and offers career development opportunities. Competitive Benefits: Enjoy a comprehensive benefits package, including health, dental, and vison insurance, retirement plans, paid vacation, bonuses and more. Location: Chittenango, NY (On-site) Employment Type: Full-Time Salary: $70,000 - $100,000 For more information, please visit _ JOB SUMMARY The primary function of this position is to support team members to meet daily safety, quality, and production requirements. The following factors serve as expectations, and will be used to measure the relative performance for individuals in the Manufacturing Manager role: • Work with Team members and other leaders to monitor standards of work and process flow within the department or work area to meet production and customer requirements., • Responsible to execute goals and objectives for the plant. PRIMARY RESPONSIBILITIES • Lead the activities of team members of production of quality parts in accordance with work instructions and company policy to ensure a quality product delivered on time., • Responsible for maintaining safety standards as required by law and company policy., • Coach and provide technical expertise to resolve issues and create and ensure corrective action(s) are implemented., • Ensure the appropriate level of accountability for goals and objectives at the team member levels., • Monitor and take appropriate timely improvement action to meet production quality and quantity., • Utilize problem solving techniques, teamwork building strategies, process control, and continuous process improvement tools to meet or exceed the operating goals/metrics., • Facilitate team member workflow management, workforce scheduling and team member placement to ensure the facility and company goals are successfully met or exceeded., • Maintain adherence to company policies, safety standards and good housekeeping practices., • Responsible for the completion of Accident Investigation forms in areas of responsibility, • Responsible for implementation of safety countermeasures and doing root cause analysis to determine appropriate safety changes that are needed to improve plant safety., • Responsible to adhere to all site safety policies and procedures., • Coach and model safe behaviors, respect for environment and 6S behaviors., • Champion safety practices at the site. QUALIFICATIONS • Education: High School Diploma or General Education Degree (GED), • Experience: Manufacturing experience required., • Other Required Knowledge, Skills & Abilities:, • LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, procedure manuals, Oracle reports and Internal Method Sheets (IMS). Ability to carry out instructions in written, oral or diagram form. Excellent team skills and ability to interact with other employees, engineers, and leadership. Ability to report progress and work with engineers to solve issues., • MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • REASONING ABILITY - Ability to deal with problems involving several concrete variables in standardized situations., • COMPUTER SKILLS - Knowledgeable of Microsoft Office and Manufacturing software WORKING ENVIRONMENT • The noise level in the work environment is usually moderate. Safety requirements for this position are safety glasses and steel-toed work boots., • Physical Demands: Standing/Walking long periods of time. Candidate will need to be able to stand/walk for extended periods of time up to 6+ hours at a time., • Travel Requirements: None NOTE: Consolidated Precision Products is an Equal Employment Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, age, disability, veteran status, genetic information, or any other characteristic protected under applicable law. It is the policy of the company to comply with all aspects of the Americans with Disabilities Act. Upon request, the company will provide reasonable accommodations to individuals with disabilities who need an accommodation to fully participate in the application process. All roles are restricted to U.S. persons (U.S. citizens, permanent residents and other protected individuals under the Immigration and Naturalization Act) due to access to export-controlled technology. CPP will require proof of status prior to employment. Note that we maintain a drug-free workplace, and all offers of employment will be contingent on satisfactory results of a drug & background screen. This is a management position This is a full time position Pay Range:

Ready to work? We are hiring and expanding! Now hiring Entry Level Aerospace Positions. Starting pay $20.14/hr with potential to make up to $40/hr depending on skills and experience. Are you looking for a stable career with growth opportunities, paid training, and great benefits? Join Consolidated Precision Products (CPP) — a trusted aerospace manufacturer with over 100 years of industry leadership producing complex components for aerospace and defense applications that help keep the world moving safely. If you bring reliability, motivation, and a strong work ethic, we’ll provide the training to help you succeed. Start a career — not just a job. We will train you! We'll provide the training to give you the skills you need to succeed. What matters most is your energy, strong work ethic, attendance, and dedication to quality. This is a great opportunity to join a stable & growth-oriented company that has been in business for over 100 years! If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Why You'll Love Working With Us • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Positions starting at $20.14 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr., 10 hr. and 12 hr. shifts available for 1st shift, 2nd shift, and weekend shift. $3/hr shift differential available for 2nd shift., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! What You'll Be Doing • You could be inspecting, cleaning, sorting, resizing, and weighing virgin wax to prepare for the injection and assembly process., • You could be weighing and preparing slurry mixtures for the creation of ceramic molds., • You could be building and deconstructing crucibles. Crucibles are containers used to melt metals in a furnace, which are usually made of ceramic materials., • You could be inspecting and preparing molds for the melted alloys to be poured into., • You could be using state of the art automation robots to assemble molds, and prepare them for the casting process., • You could be using NDT technology to X-ray each part to ensure no internal defects are present., • Throughout our process you could use various equipment, such as computers, robots, metal shear, injection mold machines, hydraulic press, plasma torch, grinders, cut-off saw, cranes and forklifts., • You will also be in a team environment so collaboration, multitasking, and providing guidance to colleagues at times will be required., • Most importantly you will need to adhere to all safety policies and procedures. What will make you a successful candidate? • High school diploma or GED., • No prior experience required as we provide training, but prior manufacturing or mechanical experience is a plus!, • Basic computer skills are needed, • Forklift license is a plus, but not required, • Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility., • Candidates offered employment are required to pass a pre-employment frug test and background study prior to employment Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position Pay Range: $20.14 - $40.00 per hour

Manufacturing and Production Entry Level Positions - 2nd Shift Entry Level rate of pay starting at $20.14/hr with potential to make p to $40 an hour. If you would love to be part of a company that is poised for substantial growth with opportunities for advancement, then working for CPP and its subsidiaries may be the right fit for you! We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components. Why You'll Love Working With Us: • Attractive Benefits Package: Enjoy a quarterly bonus, comprehensive medical, dental, and vision coverage, a 401(k) plan, company-paid life insurance, and more!, • Competitive Pay: Positions starting at a minimum of $20.14 per hour, with potential to make more based on your role, shift, and experience. Shift differentials for 2nd shift, 3rd shift and weekend shift. We also have available overtime., • Shifts: We currently have 8 hr. 2nd shift openings. $2/hr shift differential available., • Sign-On Bonus: Receive a $1000 sign-on bonus when you join our team! Primary Purpose: We are hiring for many manufacturing and production positions in aerospace. Qualified candidates applying to this role will have the opportunity to discuss specific roles they are interested in and qualified for. Positions are open at CPP Syracuse which is located in Chittenango, NY and there are openings on a variety of shifts. We will teach you all you need to know - all we ask is that you come with a team player spirt and willingness to lean. Eventually, you'll use your skills and experience to tackle challenges, achieve objectives, mentor other associates, and contribute to both short-term and long-term business success. CANDIDATES OFFERED EMPLOYMENT ARE REQUIRED TO PASS A PRE-EMPLOYMENT DRUG TEST & BACKGROUND STUDY PRIOR TO EMPLOYMENT What You'll Be Doing: • You could be inspecting, cleaning, sorting, resizing, and weighing virgin wax to prepare for the injection and assembly process., • You could be weighing and preparing slurry mixtures for the creation of ceramic molds., • You could be building and deconstructing crucibles. Crucibles are containers used to melt metals in a furnace, which are usually made of ceramic materials., • You could be inspecting and preparing molds for the melted alloys to be poured into., • You could be using state of the art automation robots to assemble molds, and prepare them for the casting process., • You could be using NDT technology to X-ray each part to ensure no internal defects are present., • Throughout our process you could use various equipment, such as computers, robots, metal shear, injection mold machines, hydraulic press, plasma torch, grinders, cut-off saw, cranes and forklifts., • You will also be in a team environment so collaboration, multitasking, and providing guidance to colleagues at times will be required., • Most importantly you will need to adhere to all safety policies and procedures. Qualifications: • Education: High school diploma or GED., • Experience: No prior experience required as we provide training, but prior manufacturing or mechanical experience is a plus!, • Computer skills: Basic computer skills are needed, • Certifications/Licenses: Forklift license is a plus, but not required, • Language skills: Ability to read, understand, and comprehend documents. Ability to speak effectively and interact with other team members, engineers, and leadership., • Mathematical Skills: Ability to add, subtract, multiply, and divide. Ability to use basic gages and measuring devices., • Reasoning Ability: Ability to deal with problems involving several concrete variables in standardized situations. Ability to carry out instructions in written, oral, and diagram form., • The ability to be reliable, work overtime as needed, and be committed to working at our Chittenango, NY facility. Working Conditions: • Frequently work near moving mechanical parts., • The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling., • Manufacturing requires repetitive motion of hands, wrists, and arms. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: _ CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Syracuse as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. Consolidated Precision Product adheres to all US Export Administration Regulations Interviews are given on a competitive basis, using job related factors. Due to the large volume of resumes we receive, not everyone who applies will be interviewed or considered for a position at CPP-Syracuse. This is a non-management position This is a full time position Pay Range: $20.14 - $40.00 per hour

The Facilities Engineer / Project Manager oversees the design, planning, implementation, and tracking of facility related projects. The position will work in collaboration with Senior Management, Maintenance, Production, Engineering and other teams to create a detailed schedule which identifies the sequences and activities needed to successfully complete the project on time and on budget. Successful project execution will require detailed technical involvement including upfront engineering and design efforts through final implementation. In addition, this role will support uptime of all critical facility related equipment by providing troubleshooting expertise and assistance. Culture, Community, & Purpose At Anoplate, we believe what we do matters—our work directly impacts the safety, reliability, and performance of critical aerospace, defense, and industrial components that serve industries across the globe. As a family-oriented company, we are deeply committed to our employees, our customers, and our community. • Customer-First Mindset: We recognize that our success is measured by our customers' success. We prioritize quality, responsiveness, and service excellence to build trusted partnerships., • Part of Something Bigger: Our work ensures that planes fly safely, military equipment performs reliably, and medical devices operate flawlessly—our customers and the world depend on us., • Community Involvement: We actively support local initiatives, workforce development programs, and industry partnerships to give back and help build a stronger future., • A Family Culture: We treat our employees like family, fostering a collaborative and supportive work environment where relationships matter, and teamwork drives success., • Making an Impact: Every member of our team contributes to something greater than themselves, knowing that their work affects lives around the world. Key Responsibilities: • Develop the project charter with key stakeholders and bring the concept to life., • Manage the planning phase of projects by developing detailed project management plans, defining and manage project scope, determine the resources (money, manpower, equipment, etc.) required to successfully complete the project, identify quality requirements, and plan for identified potential risks., • Stakeholder management. Review the project schedule with all stakeholders and all other outside contractors that will be affected by the project activities; revise the schedule as required., • Develop, define and/or manage all of the engineering documentation required for projects and/or changes to projects. (Example: Drawings, Schematics, Programs), • Designs, builds, maintains, and optimizes facility systems and related equipment, • Investigate and resolve complex facility & equipment related issues., • Determine the objectives and measures upon which the project will be evaluated at its completion., • In consultation with the appropriate manager, select staff and/or volunteers with appropriate skills for the project activities., • Manage project staff and/or volunteers according to the established policies and practices of the organization. Ensure that all project staff receive an appropriate orientation to the project., • Contract qualified consultants to work on the project as appropriate and orchestrate timing of activities with internal departments., • Execute the project plan. Document project activities and establishing a communication schedule to update stakeholders including appropriate staff in the organization on the progress of the project. Project plan should be posted as a time-based visual schedule and set up files to ensure that all project information is appropriately documented, • Review the quality of the work completed with the project team on a regular basis to ensure that it meets the project standards., • Monitor the progress of the project and make tactical adjustments as necessary to ensure the successful completion of the project., • Control the project through communicating with finance and venders as necessary while monitoring and controlling all project expenditures. Manage all project costs according to established accounting policies and procedures., • Evaluate the project to ensure that the project deliverables were on time, within budget and at the required level of quality. Evaluate the outcomes of the project as established during the planning phase and hold lessoned learned meetings with select staff., • All other duties as assigned. Your Education & Experience: Bachelor’s or associate degree with 5-10 years in experience in Industrial engineering, manufacturing engineering, or related field. 5+ years’ experience in project management or have any equivalent combination of education, training, and experience. Must possess an expert understanding of manufacturing methods and processes, including flow, layout, and production equipment. Your Knowledge, Skills & Abilities: • Candidates must possess a strong technical aptitude and the ability to apply lean thinking to projects, including planning and organization, decision making, problem solving, project management, delegation, and employee development., • The ability to learn quickly and embrace Anoplate’s business strategy by understanding Anoplate’s niche in the market and be able to align internal resources around the opportunities in that market., • Must possess excellent business judgment, utilize metrics to measure success and possess the drive to continuously improve their performance. This individual’s style and approach must demonstrate superior service and communication., • Excellent interpersonal skills and the ability to interact with a variety of internal and external customers with professionalism, poise, and polish., • The ability to work and collaborate effectively with all business partners including senior management, industry partners, and all individuals internally., • Must be able to multi-task and manage highly detailed work while balancing multiple projects., • Must be able to work in fast-paced environment and possess a very proactive approach with a bias for taking action., • Must possess the ability to work through others outside of direct reporting lines., • Working knowledge of Microsoft Office, Word, Excel, and PowerPoint., • Long periods of sitting, bending and stooping required to perform the essential functions of this position. Regularly required to sit, stand, walk, bend, climb stairs and lift objects of up to 40 lbs. as required. Why Join Anoplate? Anoplate is a 65-year industry leader in aerospace and industrial surface treatments. We offer unlimited growth potential, a dynamic team-oriented environment, and the opportunity to make a lasting impact in an evolving industry. If you’re a results-driven operations leader who thrives on developing people, driving innovation, serving the community, putting customers first, and executing strategic growth, we invite you to apply and become part of the Anoplate family. Our core belief is to fulfill the needs of our employees in order to meet the needs of our customers. Anoplate relies on the personal success of our employees. • Bonus Program: Eligible for quarterly bonus program based on corporate and individual goals/performance, • Well-Being: Comprehensive Medical benefits with zero premium cost dental coverage, Health Savings Account with company contribution, Enhanced Long and Short-Term Disability, Complimentary Wellness Programs, Employee Assistance Program, Prescription Safety Glasses Reimbursement, Annual Work Boot reimbursement, Uniforms provided at no cost for production line employees & 401(K) Savings Plan with Company Match and Immediate Vesting, • Home & Family: Work Life Balance, Paid Holidays, Paid Vacation & NY State Paid Sick Leave, • Work Life: Catered lunches, family holiday events, employee appreciation activities, community culture & amazing co-workers, • Growth & Training: On the job training, skills development & opportunities to climb the career ladder Anoplate appreciates your interest in our company as a place of employment. Anoplate is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Drug Free Workplace (DFW) Due to the nature of this position, candidates must be U.S. Persons as defined by ITAR (U.S. citizens, lawful permanent residents, or individuals granted asylum/refugee status) and Anoplate reserves the right to require documentation to support these regulations prior to your hire date. Please note that the salary information is a general guideline only. Anoplate considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, as well as market and business considerations when extending an offer.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities The Teller serves as a frontline representative of the bank and plays a key role in delivering a welcoming, accurate, and customer-focused banking experience. This position is responsible for processing financial transactions, maintaining cash accuracy, and supporting customers with everyday banking needs. The Teller actively listens to understand customer needs, provides information on products, services, and digital tools, and makes appropriate referrals to branch partners. This role requires strong attention to detail, adherence to security and compliance standards, and a commitment to creating a positive customer experience while supporting the operational integrity of the branch. Essential Responsibilities: Customer Experience & Service Delivery: • Serve as a welcoming and professional first point of contact for customers entering the branch., • Provide friendly, accurate, and efficient service while processing routine financial transactions, including deposits, withdrawals, payments, and check cashing with verification of customer identity and available funds., • Engage customers in need-based conversations to understand how the bank can service their transactional needs., • Identify opportunities to direct customers to appropriate team members for additional services or solutions., • Educate customers on digital banking tools and self-service options to enhance convenience and confidence., • Assist with routine inquiries and concerns, escalating to more complex issues as appropriate., • Support lobby management by helping guide customers to the right team member or service area., • Answer incoming telephone calls promptly and professionally, directing inquiries and providing assistance in accordance with bank standards. Sales, Advice & Referrals: • Engage customers in needs-based discussions to identify appropriate banking solutions without pressure-based selling., • Partner with branch team members to connect customers with specialists for more complex financial needs., • Support branch goals by consistently modeling strong service behaviors and effective customer engagement. Employee & Team Contributions • Collaborate effectively with team members to support branch operations and customer experience goals., • Support branch operations by assisting with customer flow, lobby engagement, and routine operational tasks as needed., • Contribute to a positive, inclusive, and respectful work environment., • Take ownership of personal performance, development, and continuous improvement. Adapt positively to change and actively support new tools, processes, and initiatives., • Actively participate in branch meetings, training programs, and professional development opportunities, including travel to training locations as required, to enhance knowledge and skills. Operational Excellence, Risk & Compliance: • Perform all teller transactions with precision and balance cash drawer within established guidelines., • Protect customer and bank information at all times and follow all security, authentication, and dual-control procedures., • Remain alert to unusual or suspicious transactions or behaviors, follow fraud-prevention procedures, and escalate concerns to appropriate team members to help protect customers and the bank., • Adhere to branch operating standards, including opening/closing procedures, cash handling protocols, and documentation requirements., • Support internal audits, reviews, and regulatory requests as needed., • Maintain proficient knowledge of and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to pertinent policies, procedures and internal controls, and meet all training requirements in a timely manner. Other Duties: • Provide support to other branches as needed to ensure proper staffing levels., • Perform other related duties as assigned or directed to support branch and bank objectives. Ancillary Duties: As an integral member of Retail Banking, this position is responsible to provide assistance wherever necessary to help the Branches and the Bank in achieving their annual goals. This may include traveling to other branches in the area to provide support as needed and to ensure proper staffing and service levels. Qualifications Education, Training and Requirements: • High School Diploma or GED required, • Ability to complete internal teller and product training, • Ability to attend a 5-7 day initial training program, which may involve overnight travel depending on distance; the company covers or reimburses applicable travel expenses, such as mileage and lodging, • Reliable transportation Skills: • Excellent interpersonal, listening, and communication skills with the ability to create positive customer interactions, • Strong attention to detail with accurate and proficient math skills, • Clear thinking, sound judgement, and the ability to stay focused in a fast-paced environment, • Ability to follow established procedures, prioritize tasks, and maintain confidentiality, • Comfort using computers, digital tools, and standard office applications; ability to learn and navigate banking systems, • Ability to build trust, demonstrate professionalism, and maintain composure during sensitive or involved customer situations, • Ability to identify customer needs and direct towards appropriate bank products and services, • Must consistently demonstrate the Company's core values: Integrity, Humility, Teamwork, and Excellence Experience: • Prior customer service and/or banking experience preferred, • Demonstrated ability to work directly with customers in a service or problem-solving capacity, • All applicants must be 18 years of age or older Other: • Ability to work flexible hours based on branch needs, • This position is designated as a rotating role and requires regular travel to multiple branch locations within the region. Reliable transportation is required, and mileage is reimbursed according to company policy. Flexibility in scheduling and adaptability to different branch environments is essential, including coverage on short notice., • Ability and willingness to travel to training sessions, meetings, professional development programs, and company-sponsored events, as required.

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator-1st shift. The hourly rate for this position is $25.89 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: NC/CNC Machine Operator 1s shift. Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator. The core hours are 6:00am-2:30pm. The hourly rate for this position is $22.52 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. JOB DESCRIPTION: • Perform a wide range of machining operations on two or more Numerically Controlled Machines., • Assist in the setting up of the equipment as directed., • Works with operation sheets, tapes and blueprints as required., • Operational sequences generally prescribed., • Required to change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges., • Assist in isolating and correcting malfunctions in machining control units., • Perform various internal operations related to producing a finished product., • Move material to and from work stations. Maintain work area, machines and control units in a clean, neat and orderly condition., • Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts., • Refer unusual conditions to proper supervision. Follow standard or prescribed safety regulations., • Duties involve application of some specialized knowledge and experience and the use of judgment to plan and perform sequence of operations or procedures within limits of standard or recognized methods and established precedent. NOTE: This job is rated to include the occasional assistance and instruction of one other person. Qualifications: Required (Basic) Qualifications: • High School Diploma or General Education Development (GED) certificate., • Minimum one(1) years' previous work experience in CNC operation, • Must be able to work in the United States without corporate sponsorship now and within the future. No relocation benefit is offered for this position. Only candidates residing within the immediate geographic area (50 miles) of Syracuse, NY will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Diamond Roofing is part of the Greenwood Industries family of market-leading specialty contractors. Founded in 1947, Diamond has built its reputation on delivering exceptional service and quality craftsmanship. From small re-roofing projects to historic multi-million-dollar restorations, our expertise and commitment to excellence are evident in every project we complete. As we continue to expand our capabilities, we offer rewarding and challenging career opportunities with strong potential for professional growth. We are hiring a hands-on Warehouse Manager to join our team in Syracuse. We are a small operation so you will be a “do-it-all” type of person. Whether it’s performing equipment maintenance, warehouse operations, inventory management, forklift operation, loading and unloading materials, driving construction materials to and from job sites, and maintaining a safe and organized work environment, you’ll have your hands in everything. You’ll build process and tracking for the warehouse. Responsibilities: • Perform equipment and small engine maintenance (i.e., cutters, generators, blowers, etc.), • Rig, secure, and drive construction materials to and from job sites, • Build and maintain inventory control processes for roofing materials, tools, and equipment, • Utilize the computer daily for warehouse operations, • Operate forklifts and move materials and equipment within the yard and warehouse, • Load and unload trucks using appropriate equipment and techniques, • Stage materials for upcoming roofing jobs, • Perform general maintenance tasks to keep the yard and warehouse clean and organized, • Follow all safety guidelines and protocols, including OSHA regulations, • As the only warehouse employee and manager, other responsibilities as needed or assigned to support warehouse and business operations Requirements: • Must have Driver’s License and possess or be able to acquire Department of Transportation Medical card which will require physical and drug testing, • 4+ years’ experience with equipment and small engine maintenance (i.e., carbonator cleaning, sparkplugs, oil changes), • Demonstrated knowledge of warehouse operations and procedures, • Experience delivering construction or similar materials, • Basic computer skills (i.e., Microsoft Office apps), • Strong drive, initiative, and reliability - you’re the only warehouse person, • Experience operating forklifts and pallet jacks, • Ability to safely lift heavy objects and perform physically demanding tasks, • Attention to detail, accuracy, and organizational skills, • Strong communication skills to effectively collaborate with team members, • Must be able to work in environmental factors that include noise, dust, hot weather, and cold weather; indoors and frequently outside, • Ability to lift 50+ pounds, • Must be able to ascend and descend stairs, ladders, and gangways on a frequent basis and be able to work while standing on a continuous basis., • Ability to safely work aloft (heights over 20’) including ladders, man lifts, harnesses, equipment tops and scaffolding Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa for this position. At Diamond, our benefits prioritize your health, financial security, and overall well-being: • Medical Coverage through Blue Cross Blue Shield with No Deductible, • 401(k) Retirement Plan with Company Match, • Generous Paid Time Off – Vacation, Sick, and 10 paid company holidays, • Company-Paid Short-Term and Long-Term Disability Insurance, • Comprehensive Blue Cross Dental and Vision Insurance, • Pre-Tax Flexible Spending Accounts (FSA), • Employee Assistance Program (EAP) The salary and benefits represent what is expected for this role at the time of posting. Compensation offered may be influenced by a variety of factors including work experience, qualifications, industry experience, market and business considerations, and internal equity, among other factors. Diamond Roofing is an Equal Opportunity Employer. We consider all qualified applicants for employment regardless of race, color, religion, sex, gender identity, sexual orientation, age, national origin, protected veteran status, disability, or any other basis protected by federal, state, or local law.

Location: Syracuse, NY (Regional Travel Required if Necessary) Contract: 12-month contract with potential for extension Schedule: 5x8s (Monday–Friday, 8 hours/day), with overtime expected Target Start Date: Late November 2026 Position Overview We are seeking an experienced Construction Manager with strong project management capabilities to oversee construction, demolition, and capital improvement projects across industrial facilities. The ideal candidate will have hands-on experience managing industrial construction and demolition activities, coordinating subcontractors, and overseeing project schedules, budgets, and safety compliance. Experience within chemical processing, manufacturing, or similar industrial environments is highly preferred. Key Responsibilities • Oversee daily construction and demolition activities, ensuring projects meet safety, quality, schedule, and budget requirements., • Manage industrial construction projects from planning and mobilization through execution and closeout., • Coordinate subcontractors, vendors, engineering teams, and internal stakeholders to ensure successful project delivery., • Supervise demolition activities, including contractor coordination, site preparation, hazard identification, and safe execution., • Develop and maintain project schedules, budgets, resource plans, and progress reports., • Conduct regular site inspections to monitor construction progress, workmanship, and safety compliance., • Manage project costs, change orders, contractor performance, and procurement activities., • Identify project risks, resolve field issues, and implement corrective actions to minimize delays., • Ensure compliance with OSHA requirements, environmental regulations, and company safety standards., • Maintain accurate project documentation and communicate project updates to leadership., • Support construction activities across multiple regional facilities as needed. Required Qualifications • 5–7+ years of construction management experience, preferably within industrial construction or manufacturing facilities., • Hands-on experience overseeing demolition projects or demolition activities within industrial facilities., • Proven experience managing on-site construction activities, subcontractors, and multiple trades., • Strong project management experience, including scheduling, budgeting, cost control, and resource coordination., • Knowledge of industrial construction methods, demolition safety procedures, and regulatory compliance., • Ability to interpret construction drawings, specifications, and project documentation., • Strong communication, problem-solving, and leadership skills., • Proficiency with Microsoft Office and project scheduling tools such as MS Project. Preferred Qualifications • Bachelor's degree in Construction Management, Engineering, or a related field., • Experience with chemical processing facilities, petrochemical plants, or industrial capital projects., • Experience overseeing demolition, equipment removal, and construction activities within active operating facilities., • PMP or Certified Construction Manager (CCM) certification., • Familiarity with Lean Construction principles. If you have a strong background in industrial construction management, demolition oversight, and field execution, we encourage you to apply.

Eaton's ES GEIS CHD division is currently seeking a NC/CNC Machine Operator - 3rd Shift. The core hours are 10:30pm to 6:30am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: • Perform a wide range of machining operations on two or more Numerically Controlled Machines., • Assist in the setting up of the equipment as directed and work with operation sheets, tapes and blueprints as required., • Change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges., • Assist in isolating and correcting malfunctions in machining control units., • Perform various internal operations related to producing a finished product., • Maintain work area, machines and control units in a clean, neat and orderly condition and move material to and from workstations., • Perform Total Productive Maintenance (TPM) activities such as minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts., • Duties involve application of some specialized knowledge and experience and the use of judgment to plan and perform sequence of operations or procedures within limits of standard or recognized methods and established precedent. Qualifications: Basic (Required) Qualifications: • High school diploma or GED, • Minimum one(1) years' previous work experience in CNC operation, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse facility (50 miles) will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. #IND123 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at www.ttm.com Work Location: 6635 Kirkville Road Work Hours: 7:30AM - 5:00 PM Scope The Quality Manager, Microwave Line reports to the site Director of Quality & Compliance and is responsible for the quality assurance function across TTM Syracuse's RF microwave and microelectronic assembly manufacturing operations. This role leads a team of Quality professionals - providing hands-on leadership from design interface through production, test, and customer delivery within a regulated aerospace and defense electronics manufacturing environment. The Quality Manager serves as a key member of the site Quality leadership team and plays a central role in maintaining compliance with AS9100 (IA9100), J-STD-001/IPC-610, and customer-specific requirements while driving a culture of continuous improvement. Duties and Responsibilities • Lead, develop, and manage a team of Quality Engineers, Quality Technicians, and Calibration Program Manager through training, performance evaluation, delegation, and follow-up. Develop training plans and conduct training of quality personnel at all levels., • Ensure product compliance to customer drawings, specifications, and quality standards across all RF microwave/microelectronic assembly operations, ensuring that only product of acceptable quality is delivered to the customer. Establish and maintain inspection procedures, sampling methods, and product quality assurance in compliance with all applicable standards., • Provide quality interface to the design engineering function, ensuring quality requirements are incorporated from design inception through new product introduction and first article completion. Participate in design reviews offering constructive input on manufacturing feasibility and process optimization., • Oversee First Article Inspection (FAI) activities in accordance with AS9102, ensuring timely and accurate completion of first article packages for customer and regulatory approval., • Manage and maintain the calibration program through oversight of the Calibration Program Manager, ensuring measurement systems are controlled and traceable., • Support the site Quality Management System (QMS) in accordance with AS9100 (IA9100) and customer/industry-specific requirements. Drive QMS compliance and readiness for transition to the IA9100 standard. Manage and support engineering change activities with internal stakeholders, deploying per customer-specific requirements., • Act as a key point of contact for customer quality matters on the Microwave line, coordinating resolution of customer issues across design, program management, process engineering, and supply chain functions. Participate in regular discussions with external customers and cross-functional teams on quality and engineering topics., • Lead and/or support internal, customer, and third-party audits. Ensure audit findings are addressed with robust corrective actions within appropriate timescales., • Drive Quality KPIs in alignment with site and business objectives, including scrap, yield, on-time delivery, and customer escape metrics. Analyze data to identify trends and drive systemic improvements. Maintain and communicate quality metrics to ensure clear visibility of current quality performance., • Champion the site's continuous improvement (9CI) program - including Customer Satisfaction, FMEA, 6S, TPM, Jidoka, ZDP, 8D Corrective Action, Quality Alert System, and DOE - driving improvement projects and developing team members as core tool subject matter experts., • Drive improvement of manufacturing processes by utilizing continual improvement tools such as DMAIC, Six Sigma, SPC, Lean Manufacturing, and error proofing. Proactively identify opportunities for process improvement and cost reduction., • Enforce departmental policies and ensure procedures are followed. Schedule and assign work within the team to regulate workflow and meet required delivery schedules., • This is a 100% on-site position (other than necessary business travel). Essential Knowledge and Skills • Thorough understanding of RF microwave/microelectronic assembly processes and associated process controls., • Strong working knowledge of AS9100/IA9100, J-STD-001/IPC-610, and related aerospace & defense industry specifications and acceptance criteria., • Proven analytical and problem-solving skills, including statistical data analysis and interpretation, as well as the ability to develop, implement, and drive improvement plans and project teams to successful completion., • Strong background in the use and understanding of key manufacturing performance metrics. Proficient in data collection, analysis, and presentation., • Expertise in FMEA, root cause analysis, SPC, error proofing, and other core quality tools. Knowledge of lean methodology and applications. Experience with First Article Inspection (AS9102) processes and requirements., • Experience with APQP/PPAP and other relevant quality planning processes., • Demonstrate proactive and strategic thinking. Willingness to challenge established ways of doing things in a constructive way., • Strong communication, planning, organizational, and leadership skills. Confident and capable in a customer-facing role., • Ability to make independent decisions with a successful track record of influencing key stakeholders across all levels of the organization., • Good English skills and ability to read, write, and communicate clearly., • Ability to work up to 10 hours a day, 5 days a week, and flexibility to work weekends as needed., • Ability to travel up to 25% of the year., • Due to ITAR requirements, applicants must be a U.S. Citizen or a Permanent Resident. Preferred Certifications • IPC certification and knowledge of relevant requirements (preferred)., • AS9100 / ISO 9001 / IATF 16949 Lead Auditor or Internal Auditor certification (preferred)., • Six Sigma Green Belt or Black Belt (preferred). Education and Experience • BS in engineering, science, or related fields., • 6+ years of leadership experience in a manufacturing environment, preferably in aerospace & defense microelectronics or microwave assembly operations, or an equivalent combination of education and experience. #LI-VM1 #IEBU Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $108,549 - $190,896 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job DescriptionDescription: Department: NOC Location: Syracuse, NY (Hybrid/Remote options) Reports to: NOC Leadership Type: Full-time, Exempt About Us ACC Technical Services is a growing MSP delivering premium IT services using modern service management, automation toolsets, and a skilled engineering team. Our style emphasizes clear outcomes, measurable service quality, and client trust. Role Summary We’re hiring an Automation & RMM Engineer. You will build and maintain proactive monitoring, remediation, and workflow automation across our RMM/PSA stack, integrate with third-party APIs, and deliver operational analytics in Power BI. Expect hands-on scripting (PowerShell/Python/SQL), configuration-as-code (YAML/JSON/Jinja), and Rewst workflow development aligned to NOC objectives and MSP delivery standards. --- Key Responsibilities · RMM Monitoring & Scripts: Design, implement, and maintain monitors, policies, and remediation scripts in our RMM platform. To ensure alert fidelity, auto-ticketing, and SLA adherence. Experience with ConnectWise Automate or NinjaOne or Datto RMM or N-able required · Workflow Automation (Rewst): Build and iterate Rewst workflows using YAML/JSON/Jinja; integrate with PSA/RMM and external systems via REST/Graph APIs; enforce input validation, error handling, and idempotent operations · Scripting & Data Ops: Author maintainable PowerShell/Python utilities and SQL queries for configuration, ETL, reporting, and bulk operations; package and version scripts; document runbooks and rollback plans. · Backup/DR Monitoring: Operate to checklist standards for backups—implement alerts and auto-ticketing for failures/warnings and long-running jobs; collaborate with service owners for remediation · API Integrations: Connect RMM/PSA and security tools with vendor APIs (Microsoft Graph, SentinelOne, etc.); design secure auth, paging, rate-limit strategies; produce repeatable connectors. · Operational Analytics: Build Power BI dashboards and data models to visualize service performance (uptime, SLAs, ticket flow, automation impact/ROI) for NOC leadership and client-facing reporting. · Service Delivery & NOC Cadence: Contribute to NOC boards, stand-ups, and weekly ops reviews; track KPIs; drive process improvements in accordance with our NOC Manager charter. · Documentation & Standards: Produce clear SOPs/runbooks; follow internal style from existing role descriptions and operations playbooks. --- Required Skills & Experience · Scripting: Proficiency in PowerShell or Python; working SQL (T-SQL or PostgreSQL) for queries, views, and basic ETL. · IaC / Templates: YAML, JSON, and Jinja for workflow definitions, payloads, and templating. · RMM Expertise: Monitor/policy design and remediation scripting in any top RMM (Automate, NinjaOne, Datto RMM, N-able). · API Integrations: RESTful API experience (auth flows, pagination, webhooks); familiarity with Microsoft Graph is a plus. · Rewst: Hands-on experience building production workflows; debugging, logging, and versioning within Rewst. · Power BI: Data modeling, DAX, and publishing secure reports/dashboards for operations and client stakeholders. · MSP Foundations: Ticketing/PSA practices, SLAs, change control, and documentation consistent with our internal job description style.--- Requirements: · Background in IT Services/MSP environments with NOC exposure · Experience with ConnectWise Manage/Automate, Rewst, Cisco Umbrella, Duo SentinelOne, and backup platforms (Veeam/Datto/Slide) · Familiarity with M365/Azure administration, Microsoft Graph permissions, and service health telemetry · Unit testing for scripts/workflows; CI/CD for automation artifacts; secure secrets handling. ---

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier program, project and cost management offering in markets around the world. Job Description Turner & Townsend are seeking a Northeast Semiconductor Lead to strengthen client relationships, lead cost and project management services, and recruit and develop a strong regional team. Working closely with our North America Semiconductor Lead and regional leadership, you will combine direct client delivery responsibility with a clear mandate to grow our Northeast business and capabilities. You will connect regional delivery teams with our national and international specialists, bringing proven approaches and fresh thinking to client challenges. We are looking for a leader who earns trust through delivery, leads with empathy and integrity, invests in people’s development, and turns new ideas into practical improvements in cost, schedule and performance. You will build a team culture grounded in respect, collaboration and shared accountability - where people feel heard, supported and confident to raise concerns or contribute ideas. Through active listening, clear expectations, constructive feedback and recognition of others’ contributions, you will help people do their best work and build lasting careers. You will set high standards, address challenges fairly and constructively, and create opportunities for people to take on greater responsibility. This is an opportunity to help build a regional business, and influence how we deliver and develop the next generation of semiconductor leaders. You will play a key role in shaping Turner & Townsend's semiconductor growth strategy across the Northeast market, helping clients deliver some of the industry's most significant capital investments while expanding our regional presence and capabilities. Responsibilities • Lead client relationships: Serve as the client’s primary point of contact for assigned accounts and programs. Understand their business priorities, maintain regular engagement with key stakeholders, and take ownership of service performance, issue resolution and follow-through., • Deliver integrated services: Lead multidisciplinary teams across cost management, project and program management, and project controls. Establish clear responsibilities and coordinate services around the client’s scope, investment objectives and delivery milestones., • Manage program P&L: Own Turner & Townsend’s profit and loss performance for assigned programs, including fee budgets, revenue and margin forecasts, staffing costs, utilization, invoicing and collections. Address financial risks early while maintaining delivery quality and client commitments., • Develop the regional business: Work with national and regional leadership to build and execute a Northeast semiconductor growth plan. Identify opportunities, strengthen existing accounts and expand services in line with client needs and available capability., • Lead proposal writing and pursuits: Develop and write compelling, client-specific proposals, including executive summaries, delivery approaches, scopes of service, staffing plans and fee submissions. Coordinate technical contributors, lead client presentations and interviews, and ensure commitments translate into achievable delivery plans., • Recruit, hire and mobilize talent: Take an active role in sourcing, interviewing and selecting cost, project management and controls professionals. Partner with recruitment and business leadership on hiring decisions, onboarding and timely deployment., • Build and scale teams: Forecast resource needs, develop staffing plans and grow teams in step with secured work and credible demand. Establish effective team structures, leadership coverage and succession plans that support continuity as programs expand., • Develop people and strengthen culture: Lead with empathy, integrity and clear expectations. Coach emerging leaders, provide timely feedback, recognize contributions and address performance concerns fairly. Create an environment where people collaborate, raise concerns and have opportunities to develop., • Establish delivery governance: Set up program execution plans, reporting standards, decision processes and escalation routes appropriate to each appointment. Maintain clear accountability across Turner & Townsend, client teams and delivery partners., • Oversee cost and commercial performance: Guide estimating, budgeting, procurement support, cost control, forecasting, change management and commercial closeout. Ensure advice is accurate, supported by evidence and useful to client decisions., • Connect cost, schedule and risk: Bring discipline leads together to assess progress, changes and emerging issues. Present coordinated recommendations that explain the implications for scope, cost, schedule and facility readiness., • Resolve delivery challenges: Act as the senior escalation point for service, staffing, commercial and client concerns. Agree practical corrective actions, assign ownership and monitor resolution through completion., • Maintain commercial discipline: Define and manage service scopes, contractual commitments and change control. Identify additional service requirements early and agree appropriate resources and fees through established approval processes., • Stay engaged with clients and teams: Maintain a regular presence at client and project locations. Seek feedback, monitor team capacity and delivery quality, and address issues before they affect client confidence or employee wellbeing., • Advance innovation and responsible AI adoption: Identify practical uses for approved digital tools, automation, data analytics and AI that improve productivity, reporting and decision-making. Support adoption while maintaining human review, accuracy and client confidentiality., • Connect regional and global expertise: Collaborate with national and international semiconductor colleagues to share talent, benchmarking, lessons learned and delivery approaches. Bring relevant expertise to local clients and contribute regional experience to the wider business., • Uphold safe, ethical and accountable delivery: Reinforce health, safety, quality and business governance expectations within our scope of services. Maintain required approvals and financial controls, and ensure teams understand their responsibilities., • Represent Turner & Townsend within the semiconductor market by participating in industry organizations, client forums, conferences and strategic networking activities that strengthen brand visibility, market intelligence and client relationships.Qualifications We are looking for a leader who can earn client trust, build strong teams and deliver results. We assess candidates by the relevance of their experience, the responsibilities they have held and the outcomes they have achieved. What you will bring • Proven leadership and delivery: A record of leading teams, projects or programs in semiconductor manufacturing or similarly complex capital environments. You can demonstrate sound decisions, ownership of challenges and consistent follow-through., • Relevant technical capability: Strong experience in cost and commercial management, project and program management, or project controls, with the ability to lead specialists across these disciplines. Deep expertise in every service area is not expected., • Client relationship ownership: The ability to serve as a trusted primary client contact, understand business priorities, communicate difficult messages constructively and resolve concerns. Evidence of earning repeat work or expanding relationships through delivery is valuable., • People leadership and team development: Experience recruiting, hiring, developing or scaling teams, supported by a leadership style grounded in empathy, accountability and respect. You set clear expectations, address performance issues fairly and help others grow., • Commercial and financial judgment: Experience managing program or business financial performance, including budgets, forecasts, staffing and commercial risks. Direct P&L ownership is valuable; comparable accountability for financial outcomes is also relevant., • Business development and communication: The ability to translate client needs into clear proposals, scopes, staffing plans and presentations. You can explain complex issues plainly and make credible commitments that delivery teams can fulfill., • Collaboration and adaptability: The ability to connect disciplines, work across organizational boundaries and bring in expertise when needed. You remain effective as priorities change and approach new challenges with curiosity and practical judgment., • Executive presence and influence: The ability to engage credibly with senior client stakeholders, industry leaders and internal executives, helping align business objectives, delivery strategies and long-term partnership goals. Experience that would strengthen your application These are advantages, not prerequisites: • Semiconductor facility, cleanroom, critical utilities or tool installation experience, including familiarity with the Northeast market., • Experience in consulting, owner advisory or professional services, including fee development, service agreements and account growth., • Practical use of digital tools, automation, analytics or responsibly applied AI to improve delivery and client decisions., • Relevant education, trade or technical training, or professional credentials. We equally welcome candidates whose capabilities were developed through hands-on delivery and progressive leadership responsibility., • Experience supporting the delivery of large-scale semiconductor manufacturing programs exceeding $500M in capital value, including greenfield, brownfield or advanced technology facility expansions. Additional Information On site requirements might change based on client needs SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list. Any speculative or unsolicited CV’s will be treated as a direct application. It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. #LI-MW1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Eaton's ES GEIS CHD division is currently seeking a CNC Machinery Operator - 3rd shift. The core hours are 10:30 pm to 6:30 am. The hourly rate for this position is $22.52 + $1.50/hour shift premium per hour. What you'll do: • Perform a wide range of machining operations on two or more Numerically Controlled Lathes, Chuckers or Turning Centers, some of which may be equipped with automatic, robotic or manual load/unload systems and/or related secondary auto/manual equipment., • Operate Six Spindle Automatic Bar Machines., • Work with operation sheets, tapes and blueprints as required., • Required to change tooling, load automatic tool changes and maintain quality standards by checking parts with adjustable or fixed gauges., • Assist in isolating and correcting malfunctions in machining and control units., • Perform various internal operations related to producing a finished product., • Work from standard work and maintain visual controls and aids (charts, schedules, etc.) and accurate records as directed., • Maintain work area, machines and control units in a clean, neat and orderly condition., • Perform minor maintenance that includes cleaning, inspection, minor lubrication and tightening loose bolts. Qualifications: Basic (Required) Qualifications: • Minimum one (1) years' previous work experience in CNC operation, or graduate of a CNC certificate program, • High school diploma or GED, • No relocation benefit is offered for this position. Only candidates residing within the immediate area of Syracuse, NY (50 miles) will be considered for this position., • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Requisition Number: 31034 Required Travel: 0 - 10% Employment Type: Full Time/Hourly/Non-Exempt Anticipated Salary Range: $43,896.00 - $65,000.00 Security Clearance: Ability to Obtain Level of Experience: Mid This opportunity resides with Warfare Systems (WS), a business group within HII's Mission Technologies division. Warfare Systems comprises cyber and mission IT; electronic warfare; and C5ISR systems. HII works within our nation's intelligence and cyber operations communities to defend our interests in cyberspace and anticipate emerging threats. Our capabilities in cybersecurity, network architecture, reverse engineering, software and hardware development uniquely enable us to support sensitive missions for the U.S. military and federal agency partners. Leadership Mindset at HII - Mission Technologies Leadership at HII is a mindset, not a title. Through our Leadership Capability Framework, we define how every employee grows, leads, and contributes-regardless of role. It sets the standard for how you can develop yourself and what you can expect from leaders across our organization. We look for candidates who want to grow in alignment with these capabilities: Know & Grow Your People - Commit to learning and supporting team success. Build Relationships - Communicate openly, collaborate well, and build trust. Take Ownership - Deliver on commitments and take pride in your work. Customer First - Focus on the mission and those we serve. Shape the Future - Bring ideas, curiosity, and continuous improvement. Act with Urgency - Take initiative and follow through with purpose. These capabilities guide how all employees contribute to our shared success across Mission Technologies. Job Description HII, Mission Technologies has a need for a Quality Control Analyst for their Syracuse, New York operations. Our ideal applicant will be self-driven with a desire to succeed with minimal direction. Strong communication skills are a must and a "can do" attitude. This position will work onsite Monday - Friday. Applicant must willing and able to obtain a secret level government security clearance. Essential Job Responsibilities • Support First Article and In-Process Inspections., • Interact with Engineering, Manufacturing, Suppliers, and DCMA., • Assist with internal and external audits (ISO 9001 / AS9100 / customer audits)., • Ensure controlled documents are reviewed, approved, released, and distributed correctly., • Support continuous improvement and corrective action activities., • Maintain quality records and databases., • Develop standardization for working procedures for high repeatability., • Be responsible for non-conforming material processes and procedures. Minimum Qualifications • High School Diploma or equivalent and 2 years additional education and/or related experience., • Knowledge of ISO 9001 / AS9100., • Understanding of process documentation, workflow definition, and analyzing gaps., • Clearance: Ability to obtain a secret security clearance. Preferred Requirements • Active Secret Clearance, • Experience working within a DoD environment is highly preferred, • Experienced in quality management systems., • Certifications in IPC610 / J-STD-001 / IPC620 Physical Requirements May require working in an office, industrial, shipboard, or laboratory environment. Capable of climbing ladders and tolerating confined spaces and extreme temperature variances. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: https://vimeo.com/732533072 HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to _ and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Bridge & Transportation Project Managers & Engineers New York State and Northern Pennsylvania JK Executive Strategies is proud to partner with an established engineering organization in search of experienced Highway, Bridge, and Transportation Engineering Professionals to support ongoing infrastructure projects across New York and Pennsylvania. We are seeking qualified individuals at various experience levels, ranging from Project Engineers and Project Managers to Senior Project Managers and Technical Engineering leaders. These positions offer opportunities to contribute to transportation infrastructure projects involving highway design, roadway reconstruction, bridge engineering, structural improvements, and public infrastructure development. Successful candidates will bring a strong technical engineering background, experience collaborating with multidisciplinary teams, and the ability to deliver high-quality projects while maintaining established schedules, budgets, and regulatory standards. Responsibilities · Lead or support the planning, design, engineering, and execution of highway, bridge, roadway, and transportation infrastructure projects. · Oversee technical engineering activities, including roadway design, structural analysis, bridge rehabilitation, load ratings, and transportation improvements. · Manage project scopes, schedules, budgets, resources, and deliverables to ensure successful project execution. · Prepare and review engineering drawings, design calculations, specifications, technical reports, construction documentation, and cost estimates. · Collaborate with transportation agencies, municipalities, consultants, contractors, and internal engineering teams. · Ensure compliance with applicable engineering standards, regulatory requirements, and established quality control procedures. · Provide technical guidance and support throughout preliminary design, final design, permitting, and construction. · Participate in project planning, client meetings, proposal development, and coordination with external stakeholders. · Identify and resolve engineering challenges while maintaining project quality, safety, and constructability. · Provide mentorship and technical oversight to junior engineering professionals, as appropriate for the position. Requirements · Bachelor’s degree in civil engineering, Structural Engineering, or a related engineering discipline. · 7+ years of progressive engineering experience, with senior-level opportunities requiring 10–20+ years of relevant experience. · Demonstrated experience in one or more of the following areas: o Highway and roadway design o Bridge engineering and structural design o Transportation infrastructure project management o Civil engineering and public infrastructure improvements · Experience preparing, reviewing, or managing engineering designs and technical documentation. · Understanding of state and federal transportation design standards, including NYSDOT and/or PennDOT requirements. · Ability to coordinate effectively with clients, project stakeholders, regulatory agencies, and multidisciplinary teams. · Strong communication, organizational, technical problem-solving, and project management skills. · Professional Engineering (PE) license preferred for certain opportunities and required for designated senior-level positions. Salary Range · $90k-$150k depending on experience JK Executive Strategies is an Equal Opportunity Employer. It is the policy of JK Executive Strategies to provide equal opportunity in employment and conditions of employment to all individuals regardless of age, race, color, religious beliefs, national origin, sexual orientation, gender identity, sex, veteran or military status, disability, pregnancy-related condition, predisposing genetic characteristics, genetic information, marital status, familial status, prior arrest, domestic violence victim status, non-job related convictions, participation in lawful activities outside of our workplace, or any other status protected by law.

The Onsite Stockroom / Asset Manager is fully responsible for delivering operational excellence within the onsite stockroom. The Stockroom / Asset Manager will have full accountability for internal metrics, ticket management, safety and that customer delivery measures are met within this part of the operation and for delivering an exceptional level of service to the client. The Onsite Stockroom / Asset Manager will be responsible for delivering continuous improvement programmes including, system and process improvements and improving service. The successful candidate must be able to self-manage their time, with experience in Hardware Asset Management, warehousing / stockroom management, logistics and distribution and can take full control of this aspect of the operation. The ideal candidate will be highly driven, demonstrate a high level of pace, energy and ambition, with the skills and experience to lead this operation successfully. Key Responsibilities: • Inventory Management: Maintaining accurate records of inventory, implementing inventory control procedures, and optimizing storage space. • Receiving and Dispatching Goods: Overseeing the receipt, storage, and dispatch of goods, ensuring timely and accurate processing. • Safety and Compliance: Ensuring a safe working environment by enforcing safety regulations, maintaining equipment, and adhering to company policies. • Logistics Coordination: Coordinating with logistics partners, transportation companies, and other departments to ensure smooth flow of goods. • Operational Efficiency: Identifying areas for improvement in warehouse operations, implementing solutions to enhance efficiency, and reducing costs. • Record Keeping: Maintaining accurate records of inventory, shipments, and other relevant data. Skills and Qualifications: • Inventory Control: Knowledge of inventory management techniques, including cycle counting, and inventory tracking systems. • Hardware Asset Management: Knowledge of Hardware Asset Management and have an understanding on AMDB / ServiceNow. • Ticket Management: Have an understanding on ticket management, experience with ServiceNow is a plus. • Logistics and Supply Chain: Understanding of the principles of logistics, including transportation, warehousing, and distribution. • Communication Skills: Excellent written and verbal communication skills to interact with staff, vendors, and other stakeholders. • Problem-Solving Skills: Ability to identify and resolve operational issues, troubleshoot problems, and implement effective solutions. • Technical Skills: Proficiency in using warehouse management systems (WMS), inventory software, ServiceNow and other relevant technologies. • Safety Awareness: Knowledge of safety regulations and procedures, and the ability to maintain a safe working environment.

Job DescriptionJob Requirements This position leads the comprehensive design, detailed analysis, and seamless integration of electrical building infrastructure systems, encompassing power distribution, standby and emergency power systems, lighting solutions, low-voltage systems, and electrical support for HVAC and control system integration. The role involves collaborating closely with multidisciplinary teams to develop innovative, efficient, and sustainable electrical designs that meet project specifications and client requirements. This position is responsible for ensuring that all electrical solutions adhere to the highest standards of safety, comply fully with applicable codes and regulations, and are practical for construction and long-term operation. Additionally, the role requires careful consideration of performance metrics, system reliability, cost-effectiveness, and lifecycle management to deliver robust and maintainable infrastructure that supports the overall success of the project. Compensation The expected pay range for this position is $93,007 - 155,011 annually, depending on experience, qualifications, and geographic location. Stark Tech reasonably expects to pay within this range at the time of hire. Individual compensation is determined based on several factors including experience, education, certifications, skills, internal equity, and market conditions. Work Experience Associate degree required; Bachelors preferred; advanced degree a plus. 10+ years in mechanical building systems or energy projects. Proven project leadership and team management experience. Professional certifications preferred. Expertise in HVAC design, load calculations, and central plant systems. Experience with sequences of operation and BAS integration. Skilled in system retrofits, upgrades, and performance analysis. Knowledge of codes, safety, and environmental regulations. Proficient in Basis of Design documents and construction specs. Experience coordinating with electrical, structural, controls, and architectural teams. Proficient in Microsoft Office and industry design software. Ability to mentor engineers and lead cross-functional teams. Strong communication and customer engagement skills. Skilled at translating technical value into business outcomes. Benefits Advance your career with Stark Tech, a leader in facilities and energy solutions. We specialize in integrating systems, providing energy-efficient equipment and services, and supporting sustainability through innovative technologies. At Stark Tech, we invest in our employees by offering a competitive benefits package recognized with Mployer's 2026 Great Employee Benefits designation, featuring Market Leading Medical Benefits, comprehensive medical, dental, and vision coverage, generous employer HSA contributions, paid time off, a 401(k) with employer match, wellness programs, and career development opportunities. Join our fast-growing, customer-focused organization where your skills and dedication will be valued and rewarded with competitive pay and a positive work environment. \nCompany Description At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter. At Stark Tech, we build careers — not just fill positions. Guided by our mission, vision, and values, we focus on hiring candidates who are aligned with our culture and committed to long-term growth. We invest in our people through meaningful training, active engagement, and intentional communication to ensure every team member has the opportunity to succeed. We’re truly built differently. We’re defined by a culture that puts customers first, challenges the status quo, and takes pride in doing the right thing—every project, every partnership, every day. Across North America, we partner with our clients in advanced building and power solutions. We work on some of the most exciting and complex environments imaginable. From K–12 schools and healthcare facilities to the Space Coast, professional sports stadiums, and world-class arenas, our teams design and deliver solutions that matter.

Job Description Telecom Network Engineer (Outside Plant)Position Overview We are seeking an experienced Telecom Network Engineer to lead the planning, design, and execution of outside plant (OSP) fiber and telecommunications infrastructure projects. This role requires deep expertise in OSP design, right-of-way (ROW) permitting, joint use (JU), pole make-ready engineering, MDU inside wiring design, and upfront network scoping. The ideal candidate will be a technical leader who can drive projects from concept through construction while coordinating with utilities, municipalities, and internal teams. Key ResponsibilitiesProject / Network Scoping • Perform initial network planning and high-level design for fiber deployments (FTTH, FTTX, backbone)., • Analyze service areas to determine optimal routing, architecture, and build strategy., • Conduct feasibility assessments, including aerial vs. underground design considerations., • Develop preliminary cost estimates, material forecasts, and build timelines., • Identify potential risks, constraints, and constructability challenges early in the project lifecycle., • Collaborate with business development and project management teams to support proposals and project bids.OSP Design & Engineering, • Develop detailed OSP fiber designs including aerial, underground, and buried infrastructure., • Produce high-quality construction drawings, splice diagrams, and bill of materials (BOM)., • Perform route planning, field validation, and constructability analysis.ROW & Permitting, • Manage and prepare ROW permits across municipalities, counties, and state agencies., • Ensure compliance with local, state, and federal regulations., • Coordinate with permitting authorities to resolve issues and expedite approvals.Joint Use (JU) Coordination, • Prepare and submit joint use applications to pole owners (e.g., utilities, telecom providers)., • Review and interpret utility pole loading analysis and engineering reports., • Coordinate with utility companies throughout the JU process.Pole Make-Ready Engineering, • Design and oversee pole make-ready work, including pole replacements, rearrangements, and reinforcements., • Review make-ready engineering packages for accuracy and compliance with NESC and utility standards., • Support construction teams during implementation.MDU Inside Wiring Design, • Design structured cabling systems for MDUs (apartments, condos, multi-tenant buildings)., • Develop riser diagrams, unit layouts, and pathway designs., • Coordinate with property owners and contractors for installation requirements.Project Management & Coordination, • Collaborate with construction, permitting, and project management teams to ensure timelines and budgets are met., • Provide technical guidance and mentorship to junior engineers and designers., • Interface with clients, vendors, and stakeholders to ensure project success. Required Qualifications • Bachelor’s degree in Engineering, Telecommunications, or related field (or equivalent experience)., • 7+ years of experience in OSP engineering and design., • Strong knowledge of:, • OSP fiber design (aerial & underground), • ROW permitting processes, • Joint use (JU) applications, • Pole make-ready engineering, • MDU inside wiring design, • Network scoping and feasibility analysis, • Familiarity with NESC standards and utility requirements., • Experience with industry tools such as AutoCAD, GIS platforms, and OSP design software., • Strong understanding of construction practices and field conditions. Preferred Qualifications • Experience working with major utilities (e.g., power companies, telecom providers)., • Knowledge of fiber network architectures (FTTH, FTTX, backbone)., • PMP or project management experience is a plus. Key Skills • Technical leadership and problem-solving, • Strong communication and stakeholder management, • Attention to detail and quality control, • Ability to manage multiple projects simultaneously Work Environment • Combination of office and field work., • Occasional travel for site walks and project coordination. Compensation & Benefits • Competitive compensation package, • Paid time off (PTO) and paid holidays, • 401(k) retirement plan, • Opportunities for career growth and advancement Location & Work Requirements • This position is based in our Syracuse, NY office., • Candidates must be local or within a reasonable driving distance., • Ability to work in-office 1–2 weeks per month is required. Monday - Friday 40+

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Manager, Process Safety is responsible for leading and continuously improving the site's Process Safety Management (PSM), Electrical Safety, and Energy Control programs. This position serves as the site Subject Matter Expert (SME) for process safety and operational risk management, ensuring compliance with applicable federal, state, and local regulations, industry standards, and company policies while supporting safe, reliable, and compliant manufacturing operations. Additionally, this position will be the lead HSE contributor for maintenance of LOTTE's International Organization for Standardization (ISO) 45001 certification. The position partners closely with Operations, Engineering, Facilities, Maintenance, Quality, Validation, and Corporate HSE to identify, assess, and mitigate risks associated with manufacturing processes, utilities, equipment, and facility operations. This position drives a proactive safety culture through technical expertise, risk-based decision-making, regulatory compliance, and continuous improvement initiatives. This position must comply with all Security requirements, Health, Safety, and Environment (HSE) regulations, and current Good Manufacturing Practices (cGMPs) applicable to the job function. Duties & Responsibilities • Serve as the site Subject Matter Expert (SME) for Process Safety Management (PSM), Electrical Safety, and Energy Control (LOTO) programs., • Lead the implementation, maintenance, and continuous improvement of site Process Safety Management programs to ensure compliance with OSHA PSM, EPA Risk Management Program (RMP), NFPA requirements, and company standards., • Facilitate Process Hazard Analyses (PHA), HAZOP studies, risk assessments, and other structured hazard evaluation processes to identify, assess, and mitigate operational risks., • Manage the site's Management of Change (MOC) program, ensuring health, safety, environmental, quality, and operational risks are appropriately evaluated and controlled prior to implementation., • Partner with Operations, Engineering, Facilities, Maintenance, and Quality teams to integrate process safety principles into manufacturing operations and business processes., • Support the design, installation, startup, qualification, and modification of manufacturing equipment, utility systems, facilities, and processes to ensure safety and regulatory requirements are met., • Administer and continuously improve Electrical Safety and Energy Control programs, including Arc Flash assessments, Lockout/Tagout compliance, training programs, and risk mitigation activities., • Lead process safety reviews associated with new technologies, capital projects, process modifications, and equipment installations.\, • Coordinate internal and external ISO45001 audits with third-party consultants and internal resources. Contribute to other ISO certifications as assigned., • Execute industrial hygiene exposure monitoring in coordination with the site's Industrial Hygienist., • Act as the HSE representative for client projects as assigned., • Conduct compliance audits, inspections, program assessments, and field observations to evaluate effectiveness of safety controls and identify opportunities for improvement., • Lead or facilitate incident investigations, root cause analyses, and development of corrective and preventive actions (CAPAs) related to safety, process safety, and operational events., • Monitor, analyze, and report process safety and HSE metrics, key performance indicators (KPIs), and leading indicators to drive continuous improvement., • Maintain regulatory records, compliance documentation, and required reports for internal and external stakeholders., • Support contractor safety and qualification programs to ensure adherence to company safety requirements and industry best practices., • Serve as a site representative during regulatory inspections, customer audits, and corporate assessments related to process safety and HSE compliance., • Deliver technical training, coaching, and guidance on process safety, hazard recognition, risk mitigation, and regulatory requirements., • Participate in emergency response planning and provide technical support during emergency events and operational incidents., • Stay current with emerging process safety technologies, regulatory developments, and industry best practices to enhance site performance., • Support the Senior Manager, HSE with departmental objectives, strategic initiatives, budgeting activities, and continuous improvement efforts., • Participate on cross-functional teams, committees, and corporate initiatives as required., • Perform other duties as assigned. Education & Experience • Bachelor's degree in Environmental Health & Safety, Engineering, Industrial Hygiene, Chemistry, Biology, Occupational Health, or a related discipline required., • 7+ years of experience in Process Safety, Health, Safety & Environment (HSE), Operational Risk Management, or HSE program leadership within pharmaceutical, biologics, biotechnology, chemical, or other highly regulated manufacturing environments., • Demonstrated success leading risk assessments, process safety initiatives, incident investigations, and regulatory compliance programs., • Experience supporting enterprise-wide process safety and operational risk initiatives across complex manufacturing operations., • Professional certification such as: Certified Safety Professional (CSP), Certified Industrial Hygienist (CIH), Certified Process Safety Professional (CCPSC), or an equivalent credential preferred., • Knowledge of Arc Flash hazards, electrical safety, and NFPA 70E compliance programs preferred. Knowledge, Skills, Abilities • Strong knowledge of OSHA Process Safety Management (PSM), EPA Risk Management Program (RMP), NFPA standards, Electrical Safety, and Energy Control (LOTO) requirements., • Experience conducting Process Hazard Analyses (PHA), HAZOPs, risk assessments, incident investigations, and Management of Change (MOC) reviews., • Experience with the ISO45001 standard and maintaining a certified occupational health and safety management system., • Familiarity with standard industrial hygiene monitoring techniques including noise dosimetry, air sampling, and real-time monitoring instruments., • Working knowledge of cGMP requirements and pharmaceutical, biologics, biotechnology, or regulated manufacturing environments., • Strong understanding of risk management methodologies and operational excellence principles., • Ability to analyze complex technical issues and develop practical risk-based solutions., • Strong leadership, project management, organizational, and influencing skills., • Excellent written, verbal, and presentation communication skills., • Proficiency with Microsoft Office applications and HSE management systems., • Experience utilizing data analytics, performance metrics, and reporting tools to drive continuous improvement., • Ability to work independently and effectively within cross-functional teams., • Korean language proficiency is beneficial but not required. Physical Demands • Ability to sit, stand, walk, climb stairs and ladders, and traverse manufacturing, utility, warehouse, and office areas for extended periods., • Ability to conduct field inspections, audits, risk assessments, and incident investigations in operating manufacturing environments., • Ability to wear required personal protective equipment (PPE) and comply with site safety requirements., • Ability to lift, carry, push, and pull up to 25 pounds occasionally., • Ability to access confined or restricted industrial spaces, elevated work areas, and outdoor locations when required and in accordance with site safety procedures., • Ability to respond to emergencies, incidents, and business-critical situations, including occasional after-hours support for a 24/7 manufacturing operation., • Ability to travel between facilities and vendor or contractor locations as business needs require. Work Environment • This position operates in both office and manufacturing environments., • Routine exposure to active production, utility, laboratory, warehouse, and construction areas should be expected., • Position is based on a manufacturing campus and requires frequent presence in operational areas to support risk assessments, inspections, audits, investigations, and safety initiatives., • Work may involve exposure to noise, moving mechanical equipment, chemicals, temperature variations, and other industrial conditions typical of pharmaceutical and biotechnology manufacturing facilities., • Access to GMP and classified manufacturing areas is required and may necessitate the use of appropriate PPE, including safety glasses, hearing protection, safety footwear, hard hats, respirators, and other site-required protective equipment., • Occasional work outside of normal business hours may be required to support incident response, project activities, shutdowns, or a 24/7 manufacturing operation. Travel Less than 5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range $76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities The Branch Supervisor directly supervises the staff and operations of a small branch, or may work with a Branch or District Manager to provide supervision of staff and operations at one or more locations in need of additional oversight. The Branch Supervisor coordinates specific branch goals with the Branch or District Manager, supervises branch personnel, ensures office compliance with operating policies and procedures, provides required periodic reports and may have lending authority. Works directly with staff to provide an optimal customer experience. Essential Responsibilities: • Directly supervises the branch office and performs or delegates a variety of duties including oversight of branch service operations to include approval of transactional overrides; branch general ledger accounts; vault and drawer audits; approval of overdrafts; control of negotiable supplies; cash management, ordering and shipments; ATM balancing and maintenance; ensuring proper branch security measures are in place; preparation of regulatory, internal and operational reports; participation with audits of key branch functions, • Works with management in establishing growth, sales, and profit objectives for the office; provides input to these objectives and to the manner in which performance will be measured and controlled, • Solicits new business from current and prospective customers; maintains ongoing business relationships with customers to optimize additional cross-selling opportunities, • Monitors individual sales and customer service performance against goals and discusses performance with manager on a frequent basis, • Maintains thorough knowledge of features and benefits of all consumer products and services to ascertain customer needs and to fill those needs, • Monitors the progress of staff members and assists them with questions or problems, conducting regular staff meetings to keep all informed, • Opens and maintains deposit accounts in accordance with bank procedures, • May make loans to customers with oversight as appropriate, • Directly supervises assigned personnel as follows:, • Assists in the selection of new personnel, • Coordinates orientation and training of new personnel, • Reviews employee performance throughout the introductory period and on a regular basis thereafter, • Manages and maximizes performance levels of staff members through regular feedback; takes appropriate actions for performance improvement, • Organizes, schedules, and distributes work among staff, • Keeps personnel informed of pertinent policies and procedures and creates an atmosphere in which upward communication from staff is encouraged, conducting regular staff meetings to enhance employee engagement and desired level of customer service, • Administers personnel policies and procedures, • Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to pertinent policies, procedures, and internal controls, and meet all training requirements in a timely manner, • Model and hold staff accountable for upholding the core values of the Company: Integrity, Humility, Teamwork, and Excellence, • May be called upon to travel to other branches in the area to provide support as needed and to ensure proper staffing levels Ancillary Duties: • As an integral member of the branch staff this position is responsible to assist wherever necessary to ensure that the branch and the Bank achieve goals, including filing in as needed with any transactions and customer inquiries., • May be called upon to travel to other branches in the area to provide support as needed and to ensure proper staffing levels. Qualifications Education, Training and Requirements: • A.A.S. Degree of equivalent; specialized banking education and training, • Valid driver license and reliable transportation Skills: • Excellent interpersonal skills, including listening, persuading and motivating, • Excellent verbal and written communication skills, • Accurate and proficient math skills, • Attention to detail, • Clear thinking and ability to remain focused, • Must be able to consistently demonstrate the Company’s core values: Integrity, Humility, Teamwork and Excellence, • Internal product knowledge and teller training (provided after hire) Experience: • Minimum four (4) years’ experience in related positions normally required, • All applicants must be 18 years of age or older Other: • This position requires National Mortgage Licensing System (“NMLS”) registration under the terms of The Secure and Fair Enforcement for Mortgage Licensing Act of 2008 (The SAFE Act).

Job Description Crest Cadillac & Acura is seeking an experienced Automotive Parts Manager to join our established and growing service team. This is an opportunity to contribute to a family-owned and operated dealership that has built its reputation on personalized service, long-term customer relationships, and a commitment to excellence since 1984. In this role, you will help keep a critical part of the dealership running smoothly by supporting both the service team and customers with accurate, responsive, and well-organized parts operations. We're looking for someone who can bring leadership, attention to detail, and a customer-first mindset to a fast-paced environment where efficiency, quality, and follow-through matter. Responsibilities • Manage the automotive parts department and its staff to deliver efficient, high-quality customer service while meeting dealership sales and profitability goals., • Coordinate parts procurement, receiving, processing, stocking, inventory control, and distribution; create daily stock orders and maintain accurate records., • Handle returns, discrepancies, backorders, warranty returns, special orders, monthly price updates, shipping, invoices, purchase orders, reports, and sales forecasts., • Assist internal and external customers at the counter and by phone, research parts and pricing, place supplier orders, and coordinate with service staff, vendors, carriers, and customers., • Recruit, train, schedule, supervise, evaluate, and discipline counter staff and parts drivers., • Maintain a clean, safe work environment and perform related duties supporting operational goals. Requirements Education and Experience: • High school diploma or GED required., • Valid New York State driver's license without major infractions., • Eligible to work in the United States., • Previous experience in an automotive parts department required., • Prior supervisory experience preferred. Special Requirements: • Ability to work overtime on a regular basis., • Ability to work weekends., • Occasional overnight travel during normal work hours. Knowledge, Skills, and Abilities: • Computer proficiency including word processing, data entry, spreadsheets, and generating reports using standard software applications., • Proficiency with standard office software, including Microsoft Outlook, Word, Excel, and Adobe Acrobat., • Experience with Snap-on/Proquest and Automate., • Understanding and recognizing part numbers and line codes to ensure the proper selection of parts, including identifying sequences of numbers and letters accurately and rapidly., • Ability to read and comprehend instructions and information., • Excellent communication and managerial skills., • Knowledge of dealership products, warranties, workflows, and operating procedures., • Experience with inventory management, purchasing, product data management, production control, costing, and reporting., • Ability to communicate effectively, both verbally and in writing., • Experience in customer-facing communication, customer service, and complaint resolution., • Ability to work both independently and in a team environment., • Ability to gather data, analyze information, and prepare reports. Physical and Mental Requirements: • Ability to sit, stand, walk, talk, hear, use hands to finger, grasp, handle or feel, push, pull, reach, crouch, kneel, bend or stoop, and perform repetitive motions of the hands and/or wrists., • Ability to exert up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Close mental and visual attention required to perform work dealing primarily with preparing and analyzing data and figures, using a computer terminal, and/or extensive reading. Equipment Used: • Ability to operate a computer, printer, photocopier, telephone, fax machine, scanner, calculator, adding machine, cash register, pallet jack, and various hand tools. Environmental Conditions: Work involves moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, cleaning chemicals, unpleasant odors, and/or loud noises. Benefits Competitive Compensation: Annual Salary $65,000 - $85,000 Depending on Experience Equal Opportunity Employer Crest Group is an equal opportunity employer. We provide equal employment opportunities without unlawful discrimination based on age, race, color, creed/religion, disability, national origin, sex/gender, sexual orientation, veteran or military service member status, familial status, marital status, domestic violence victim status, genetic predisposition or carrier status, arrest and/or criminal conviction record, or any other category protected by law, unless based upon a bona fide occupational qualification or other exception

Job Description Job Duties and Responsibilities (Technical): • Review and become familiar with reference background information such as geotechnical exploration reports, project specifications and civil/structural plans for use during design and preparation of the design drawings and calculations., • Analyze various ground improvement approaches and select the option that meets the project criteria., • Develop cross sections, generate soil profiles, and select soil properties for design., • Perform finite element modeling, as needed, to understand complex soil-structure interactions and estimate deformations and stresses within the soil and ground improvement elements., • Perform all required design calculations and analyses including, but not limited to, global stability, settlement, bearing capacity, and structural and geotechnical capacity of CMCs., • Coordinate or prepare design documents (final design calculations and drawings)., • Review all Quality Assurance/Quality Control from the Field Engineer., • Respond quickly to questions from the project team and any conditions that deviate from the design. Knowledge, Skills and Abilities: • Understands basic principles of geotechnical design and can perform basic calculations., • Proficient with slope stability analysis and finite element modeling., • Proficient with MS Word, Excel and Outlook, familiar with AutoCAD., • Understands and adheres to Menard’s safety and quality standards., • Effectively communicates with internal project team members constantly throughout the project., • Strong oral and written communication skills., • Develops ideas and offers alternatives to facilitate solutions., • Able to manage multiple tasks, activities and commitments. Education and Experience Requirements: Master’s or bachelor’s degree in civil engineering with geotechnical design experience or coursework. -OR- any equivalent combination of education and experience which meets the required knowledge, skills and abilities. Certifications, Licenses, Etc: Required: None Desired: E.I.T. [Engineer in Training]

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend is highly experienced in providing authoritative advice and professional expertise in the fields of Contracts and Procurement Support along with Project Advise to a market leading client base. We are dedicated to making the difference to all our clients engaged in the delivery of major capital projects and programs in the Americas and globally. Due to increased workload and securing of new clients, Turner & Townsend is seeking all levels of Contract Management. Responsibilities: The successful candidate will have the opportunity to work with an outstanding team of specialist consultants, advise major clients on large scale construction projects and challenge themselves in a market-leading global business. Duties of This Role The individual will have the opportunity to work alongside a highly skilled team delivering best-in-class strategic procurement and contract advice, including end-to-end advisory services to one of our key account clients. • Fulfilling the responsibilities of a Contracts Manager., • Supporting the development and implementation of contracting strategies for major construction projects using a range of privately funded delivery models., • Support the provision of specialist contracts and related procurement advice to private sector clients across a variety of healthcare construction contracts., • Drafting Requests for Proposals (RFPs), evaluation of scorecards and contracts, and supporting the process for procuring vendors., • Developing contract structures for the main delivery strategies, including multi-packaging scenarios on complex projects with multiple contract interfaces., • Supporting end-to-end procurement services on major construction and construction services related projects., • Building positive relationships within the project team and with Client personnel and their key advisors., • Managing and updating internal contract team trackers, reviewing SOW’s and MPA’s proposal documentation and the work winning capability of the contract services division., • Supporting the delivery of both teams and wider business targets., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable.Qualifications, • Experience working in multiple contract environments and under a range of procurement/contract delivery routes., • Degree or equivalent in construction or a related course of study., • Confident, independent, and able to work autonomously without the need for supervision., • Ability to engage in a collaborative team environment., • Excellent written and oral communication skills, adaptable and determined to succeed. Education and Experience • At least 5 years’ experience in the construction industry and/or contract services to public and or private clients for large-scale capital investment projects., • Working knowledge and experience of various forms of contracts for the delivery of construction projects., • Experience working in a multi-contracted environment., • Experience in the development and procurement of GMP’s/Lump Sum or similar project-financed projects is desirable., • Supporting contract development and administration experience across a variety of sectors including health care, retrofits, and/or real estate; client-side., • Experience in implementing contracting strategies, including risk identification, quantification, and allocation., • Experience in contract development, supporting drafting bespoke contract schedules and clauses, and reviewing contract documents prepared by others., • Managing inputs from other professional team members, including technical, legal, and commercial/financial., • Proven ability to liaise with and coordinate multiple stakeholders to develop robust contract documents. Additional Information On site requirements might change based on client needs Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list. Any speculative or unsolicited CV’s will be treated as a direct application. It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. #LI-MW3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities The Relationship Banking Representative serves as a frontline ambassador of the bank and plays a critical role in delivering a consistent, customer-centric, end-to-end banking experience. This position flexes across teller and desk responsibilities, combining accurate transaction execution with consultative conversations that build trust and deepen relationships. The Relationship Banking Representative actively listens to understand customer needs, educates customers on products, services, and digital tools, and provides thoughtful guidance or referrals that support customers’ financial well-being, while adhering to all bank policies, procedures, and security standards. Essential Responsibilities: Customer Experience & Relationship Management: • Deliver a welcoming, professional, and personalized customer experience during every interaction. Serve as a primary point of contact in the lobby, engaging customers proactively and guiding their in-branch journey., • Build trust by actively listening, asking thoughtful questions, and understanding customers’ financial needs and goals., • Process everyday banking transactions and routine inquiries accurately while maintaining a consultative, customer-first mindset. Open new accounts, close accounts, initiate wire transfers, and support service requests while educating customers on features, benefits, and tools., • Assist customers with issues such as balance discrepancies, debit card fraud, and other service needs. Advocate for customers by coordinating with internal partners and operational teams to ensure timely, accurate resolution., • Educate and guide customers on digital banking tools, self-service options, and best practices to enhance convenience and engagement., • Manage customer flow and wait times by scheduling, coordinating, or facilitating appointments with appropriate team members. Sales, Advice & Business Development: • Identify customer needs through conversation and observation, recommending appropriate banking solutions without pressure-based selling., • Generate and manage customer follow-ups, outreach calls, and appointment setting to strengthen relationships., • Participate in branch prospecting efforts, campaigns, and community engagement activities., • Collaborate with branch partners to refer customers to specialists for more complex financial needs., • Contribute to branch goals by consistently modeling needs-based conversations and relationship-building behaviors. Employee & Team Contributions: • Act as a brand ambassador by modeling quality service in every customer interaction. Collaborate effectively with team members to support branch operations and customer experience goals., • Contribute to a positive, inclusive, and respectful work environment., • Take ownership of personal performance, development, and continuous improvement. Adapt positively to change and actively support new tools, processes, and initiatives., • Actively participate in branch meetings, training programs, and professional development opportunities, including travel to training locations as required, to enhance knowledge and skills., • May assist with training or mentoring new team members, as needed. Operational Excellence, Risk & Compliance: • Accurately perform teller and platform transactions and balance cash drawers within established policies and procedures., • Apply customer authentication, due diligence, and regulatory requirements to all transactions and account activities., • Maintain the confidentiality and security of customer and bank information at all times., • Follow dual control, open/close procedures, and security protocols consistently., • Participate in audits, internal reviews, and regulatory requests, as required., • Maintain proficient knowledge of, and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to pertinent policies, procedures and internal controls, and meet all training requirements in a timely manner. Other Duties: • Provide support to other branches as needed to ensure proper staffing and service levels., • Perform other related duties as assigned or directed to support branch and bank objectives. Ancillary Duties: As an integral member of Retail Banking, this position is responsible to provide assistance wherever necessary to help the Branches and the Bank in achieving their annual goals. This may include supporting transactions, customer inquires, or traveling to other branches in the area to provide support as needed and to ensure proper staffing and service levels Qualifications Education, Training and Requirements: • High School Diploma or GED required, • Internal product knowledge, teller, and platform training preferred, • Ability to attend a 5–7-day initial training program, which may involve overnight travel depending on distance; the company covers or reimburses applicable travel expenses, such as mileage and lodging, • Reliable transportation Skills: • Excellent interpersonal, listening, and communication skills with the ability to engage customers in meaningful financial conversations, • Strong attention to detail with accurate and proficient math skills, • Clear thinking and sound judgement in a fast-paced, customer-focused environment, • Strong documentation and organizational skills with the ability to manage multiple priorities, • Proficiency in digital tools and Microsoft Office; comfort navigating banking systems and digital banking platforms, • Ability to build trust, demonstrate empathy, and remain professional during complex or sensitive customer interactions, • Must be able to consistently demonstrate the Company's core values: Integrity, Humility, Teamwork, and Excellence Experience: • Two (2) years of customer service and/or banking normally required, • Demonstrated ability to work directly with customers in a service, advisory, or problem-solving capacity, • All applicants must be 18 years of age or older Other: • Ability to work flexible hours based on branch needs, • Travel to nearby branches may be required to support staffing and business needs, • Ability and willingness to travel to training sessions, meetings, professional development programs, and other company-sponsored events, as needed.

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description The Sr. Manufacturing Engineer is responsible for resolving issues related to assembly & test on the production floor as well as identifying opportunities for streamlining existing processes and/or improving tooling & fixturing and using data tracking & statistical analysis to identify areas for improvement. This individual will need to possess strong skills in fixture & tooling design and a good grasp on the basics of statistical process capability. They should also be strong at identifying inefficiencies in production processes and be able to propose & implement solutions that will lead to improvements. Specific duties include, but are not necessarily limited to: Identify inefficiencies in production assembly & test production lines and propose & implement robust solutions Design and implement assembly & test fixtures to improve both the quality, reliability, repeatability & production rates of the existing processes and new production builds Work to improve first-pass yield in the assembly & test areas by working to identify the primary causes of failures and making recommendations for improvements Use quality tools independently such as SPC, PFMEA, and MSA Organize and implement strategies based on KPIs to continually drive improvements with verifiable cost reductions and capacity increases Identify design & test specifications that have been poorly defined or over-constrained and work with suppliers and/or the production floor and Design Engineering to help better define the necessary specifications Ownership on the transition to production for new products along with the sustainment and production floor issues for existing product Outline production routings on new product for the ERP Data Team and identify when current SAP production routings do not match reality and work with the ERP data team to make the necessary changes/updates Identify through objective criteria & analysis when in-process inspection need to be incorporated in order to minimize the amount of value-add on discrepant material Develop the outline and approve the production assembly and test procedures developed by the Manufacturing Services team Create new or improve existing Manufacturing processes in MES Solve high level technical issues internally or at customers, other INFICON locations, or supplier sites that relate to INFICON’s products. Assist with investigations using the 8D methodology to ensure quality-related issues are contained and that future occurrences are eliminated on all major warranty claims and internal discrepant material Mentor and guide less experienced engineers or engineering students Lead large complexity projects including ones with large capital investments Work jointly on a near-daily basis with INFICON’s production technicians & supervisors, quality, supply-chain, product center, engineering and production automation teams Behaviors Behaviors necessary for this role include, but are not necessarily limited to: Organized and logical individual who enjoys challenges and is a critical thinker Possesses strong problem-solving skills and articulates information well and collaborates well with others The ability to manage multiple projects at the same time Establish credibility & trust from all levels of the organization Qualifications Education and/or Experience Minimal requirement BS in a Mechanical Engineering with 7+ years’ experience or equivalent Demonstrated ability to design improvements in production build & test fixtures and methods Demonstrated ability to perform troubleshooting and failure isolation Demonstrated knowledge in implementing, monitoring, and deriving value from Statistical Process Control (SPC) Experience in high cleanliness, tight tolerance, and high mix manufacturing environments is preferred Additional Information The expected salary range for this position is between $88,000 and $130,000 per year. The actual compensation will be determined based on experience, location, and other factors permitted by law. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for a Fire Alarm/Intrusion/Access Control Service Technician for work at various retail locations across the United States. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401K and IRA Retirement Savings, • Per-Diem paid when overnight travel is required, • Drive time and mileage paid for use of a personal vehicle when travel is required, • Company vehicle provided after orientation Requirements:, • Field installation experience in security environments: Fire Alarm /Intrusion / Access Control, • NICET certification (Preferred), • Current/valid state required Physical Security license and/or Life Safety license in the applicable technology., • Knowledgeable about NFPA standards, including NFPA 70 and 72, • Work schedule mainly during the day 8 am to 5 pm, with some night shifts., • Available and willing to work at heights of 20’-60’ on lifts., • Experience reading blueprints and site maps., • Experience with multiple Intrusion/Access system manufacturers is a plus., • Assist with pre-installation opportunities by designing and planning technical solutions., • Perform new installs and provide technical escalation support both on-site at customer locations as well as remotely via the phone and specialized tools., • Excellent customer relationship and communication skills; verbal and written., • Has basic PPE, and reliable transportation during the training period prior to issuing a company vehicle, • Computer/laptop/smartphone proficiency., • Basic understanding of Microsoft Office Products (Word, Excel, PowerPoint) is a plus., • Highly proficient with the use of email, spreadsheets, and the ability to learn internal systems., • Valid driver’s license with a clean driving record; no DUI or DWI in the last three years. Responsibilities:, • Install, troubleshoot, and repair cabling systems and equipment in IP Video, Access Control / Intrusion Alarm / LAN/WAN infrastructure, and wireless LAN., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit bending work., • Complete all wiring, connections/terminations, and equipment installations ensuring that Access Control and Intrusion systems are complete with total customer satisfaction and contractual requirements., • Install, repair, or upgrade fire alarm systems and program control panels for fire alarm systems with the guidance of building plans and electrical layouts., • Mount sensors at appropriate locations, performing all necessary tasks, such as drilling holes for cabling and accessing locations such as crawlspaces or attics., • Complete all wiring, connections, and equipment installations ensuring that fire alarm systems are in compliance with electrical and fire codes., • Tests to ensure all newly installed fire alarm systems and component devices are operational., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA., • Perform any other duties not specifically statedherein, but which your supervisor may assign., • Ensure all work complies with current codes and regulations., • Assist and collaborate with the Installation Team Lead or Project Manager regarding on-site work schedules and timely delivery of equipment., • Conduct tests to ensure all newly installed systems and component devices are operational., • Troubleshoot new system installations to ensure the proper functioning and to ensure the system meets local, county, state, or federal codes and legal and/or insurance requirements.Travel and Training, • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years), • Willingness to travel moderately (up to 20–30%) and work flexible shifts, including overnights, • Must have reliable personal transportation for use during the initial training period; must be willing to attend a mandatory one-week, in-person technician orientation in Lowell, Arkansas upon hire; orientation is scheduled shortly after hire based on the next available session, and a company vehicle will be provided upon completion of orientation Based on experience/qualifications. About: Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description *Part-Time, Full-Time, Remote, On-Site, and Hybrid Opportunities Available Diversify and accelerate your work experience, elevate your career marketability, and increase your earnings with ProNexus. Visit our Career Page to learn more about how ProNexus can be a great steppingstone at any stage of your career. ProNexus, LLC is seeking Finance Managers to join our Firm. Joining ProNexus offers the opportunity to work with diverse clients and tackle challenging projects that will expand your skills and expertise in the field of accounting and finance. Enjoy the freedom and flexibility to choose your engagements, manage your workload and control your work life balance. If you are a motivated and dedicated professional looking for a rewarding career opportunity, we encourage you to apply and become part of our team. Attributes of our consultants include: commitment to unparalleled client service, adept at navigating complex and dynamic scenarios, possessing strong communication acumen, and proficient in problem-solving, execution, and knowledge transfer. Skilled in multitasking to efficiently meet diverse demands of our clients. To apply, please submit your resume and cover letter to Sarah Shaffer. If you would like to get a head start to make it through our process we encourage you to complete our Preliminary Questionnaire on our website. We look forward to hearing from you! About the Role ProNexus is looking for Finance Managers to oversee financial activities, manage financial resources, and provide strategic financial guidance to our clients. Reporting to the Director of Finance or Chief Financial Officer (CFO), the Finance Manager plays a crucial role in financial planning, analysis, reporting, and decision-making to support the organization's objectives and ensure financial stability. Key Responsibilities: • Financial Planning and Analysis:, • Lead the development and implementation of financial planning processes, including budgeting, forecasting, and long-term financial planning., • Conduct financial analysis, variance analysis, and performance tracking to assess business performance and identify areas for improvement., • Provide insights and recommendations to senior management based on financial analysis and market trends., • Budgeting and Forecasting:, • Coordinate the annual budgeting process, working closely with department heads and senior management to develop accurate and achievable budgets., • Prepare monthly, quarterly, and annual forecasts based on historical data, market trends, and business drivers., • Monitor actual financial performance against budget and forecast, analyzing variances and providing explanations and recommendations., • Financial Reporting and Compliance:, • Oversee the preparation and analysis of financial reports, including monthly financial statements, management reports, and regulatory filings., • Ensure compliance with regulatory requirements, accounting standards, and internal controls., • Coordinate with auditors and regulatory authorities as needed to support audits and ensure compliance., • Cash Management and Treasury:, • Manage cash flow, liquidity, and working capital to ensure sufficient funds for operations and strategic initiatives., • Develop and implement cash management strategies, including investment strategies, debt management, and financing arrangements., • Monitor banking relationships, credit facilities, and compliance with debt covenants., • Financial Systems and Process Improvement:, • Evaluate and optimize financial systems, processes, and controls to improve efficiency, accuracy, and effectiveness., • Identify opportunities for process improvement, automation, and streamlining within the finance function., • Implement best practices and procedures to ensure the integrity of financial data and enhance financial operations., • Stakeholder Communication and Relationship Management:, • Build and maintain strong relationships with internal stakeholders, including senior management, department heads, and finance team members., • Communicate financial performance, strategies, and risks effectively to stakeholders, providing transparency and clarity., • Collaborate with cross-functional teams, including operations, sales, and marketing, to support business initiatives and achieve financial goals. Qualifications: • Bachelor's degree in Finance, Accounting, Business Administration, or related field (Master's degree or MBA preferred)., • CPA (Certified Public Accountant) or CFA (Chartered Financial Analyst) designation preferred., • Minimum 5+ years of experience in finance roles, with demonstrated success in financial planning, analysis, and reporting. please note ProNexus welcomes anyone including those that have 25+ years of experience that is willing to be hands on to perform the scope of the work required., • Strong understanding of financial principles, accounting standards, and regulatory requirements., • Proficiency in financial modeling, budgeting, forecasting, and financial analysis., • Excellent analytical, problem-solving, and decision-making skills., • Exceptional communication, interpersonal, and leadership skills., • Ability to manage multiple priorities and meet deadlines in a fast-paced environment., • Experience with ERP systems and financial software preferred., • Experience in a customer service role / client facing, public accounting, consulting or advisory roles is advantageous. The role of a Finance Manager requires a combination of technical expertise, strategic thinking, leadership capabilities, and effective communication skills to drive financial performance, support business objectives, and ensure financial stability within the organization. About ProNexus ProNexus is a professional services firm that delivers business solutions and consulting services to help companies manage and execute their finance, accounting, and IT projects and initiatives. At ProNexus, our consultants and project professionals have an average of 7-20 plus years of experience and they bring a higher degree of competency, quality, and productivity at a more competitive value than other traditional consulting and Big 4 firms. ProNexus is an equal opportunity employer and values diversity in the workplace. We do not discriminate on the basis of race, color, religion, gender, sexual orientation, age, marital status, veteran status, or disability status. To apply, please submit your resume and cover letter to Sarah Shaffer. If you would like to get a head start to make it through our process we encourage you to complete our Preliminary Questionnaire on our website. We look forward to hearing from you!

Job DescriptionCompany Description INFICON is a leading provider of innovative instrumentation, critical sensor technologies, and Smart Manufacturing/Industry 4.0 software solutions that enhance productivity and quality of tools, processes, and complete factories. These analysis, measurement and control products are essential for gas leak detection in air conditioning/refrigeration and automotive manufacturing. They are vital to equipment manufacturers and end-users in the complex fabrication of semiconductors and thin film coatings for optics, flat panel displays, solar cells and industrial vacuum coating applications. Other users of our vacuum-based processes include the life sciences, research, aerospace, packaging, heat treatment, laser cutting and many other industrial processes. We also leverage our expertise in vacuum technology to provide unique, toxic chemical analysis products for emergency response, security, and environmental health and safety. Job Description The successful candidate will focus on developing and advancing Quartz Crystal Microbalance (QCM) applications for semiconductor and display manufacturing processes. Working closely with major customers and INFICON field application teams globally, this individual will investigate process and equipment challenges, develop and validate QCM-based solutions, and demonstrate the value of QCM technology in real-world applications. As the team's QCM application specialist, the successful candidate will also serve as a technical consultant to field application engineers and customers, develop application best-known methods (BKMs), troubleshoot complex application and product performance issues, and collaborate closely with Product Management and R&D to improve existing solutions and investigate new QCM sensor concepts. Responsibilities · Develop product applications on various semiconductor and display manufacturing equipment and process tools. Interpret sensor data to characterize, optimize and troubleshoot semiconductor equipment and processes. · Work with field applications to create custom integration solutions for new and existing INFICON solutions. Act as a technical consultant and advise field Engineers or customers on application BKMs. · Interact cross-functionally with local Sales & Support team, factory engineering and product management to ensure alignment with customer needs. · Troubleshoot critical product performance issues at the hardware level and monitor health of equipment installed base via periodic audits. · Participate in customer meetings, escalations and new opportunity discussions · Interface internally with Product and Account Management to communicate technical requirements and recommendations as part of the solution development process where off-the-shelf solutions may not be an ideal fit · Routinely interface with counterparts in other locations to leverage new opportunities. · Design and execute experiments (DOEs), analyze and present data and findings, and quantify the technical and business value of INFICON solutions, including customer return on investment (ROI). · Document laboratory work and equipment evaluations of INFICON and competitor instruments. · Develop and present presentations to customers regarding products and applications · Write application bulletins and technical articles to be published in conjunction with the Corporate Communications Department Qualifications · Master’s degree in Materials Science, Chemical Engineering, Chemistry, Physics or a related technical field with 5 or more years of experience in the area of commercial semiconductor manufacturing process or equipment engineering. Ph.D. in related technical field is desirable. · Experience in semiconductor fabs is desired · Ability and drive to develop a strong understanding of semiconductor processes and tools, yield improvements and have the ability to think outside the box · Hands-on experience in the research lab or with semiconductor process equipment in a fab, equipment supplier, or laboratory environment is strongly preferred. · Direct experience with Quartz Crystal Microbalance (QCM) technology is strongly preferred. Experience with thin-film deposition, chamber clean monitoring, semiconductor process monitoring, or other applications relevant to QCM technology is highly desirable. · Experience with Residual Gas Analysis (RGA), Optical Emission Spectroscopy (OES), RF sensing, and/or other semiconductor process monitoring technologies is a plus. · Strong curiosity and technical initiative, with the ability to investigate complex process and equipment problems, develop hypotheses, design experiments, analyze data, and drive problems toward practical solutions. · Excellent problem-solving, listening, written and verbal communication, and presentation skills. · Strong interpersonal skills and the ability to build effective relationships with internal teams, field application engineers, and customers. · Ability to adapt effectively to changing field and customer situations and manage multiple technical priorities. · Self-motivated and able to work independently while remaining an active contributor to a close-knit, collaborative team. Additional Information The expected salary range for this position is between $90,000 and $110,00 annually. The actual compensation will be determined based on experience, location, and other factors permitted by law. In addition, INFICON employees are eligible for a profit-sharing bonus with a target of 10% as well as 401K match up to 8% (vesting schedule). INFICON provides a dynamic work environment that promotes diversity, equity, and inclusion. Our employees experience ongoing green initiatives, flexible work hours, and a variety of health and wellness programs. INFICON’s forward-thinking approach offers countless opportunities to design, support, and manufacture a diverse product portfolio that expands globally. Our Lean and Agile work environment offers competitive compensation, relocation assistance, a discretionary bonus, and generous employee benefits; major medical, dental, health, vision, 401K, vacation and sick time, tuition reimbursement, and more! INFICON is committed to ensuring that our online application process provides an equal opportunity to all job seekers that apply without regard to race, religion, ethnicity, national origin, citizenship, gender, age, protected veteran status, disability status, genetic information, sexual orientation, or any other protected characteristic. A notice describing Federal equal employment opportunity laws is available here to reaffirm this commitment. Any contact that would like to request a reasonable accommodation to participate in the application process should contact us.careers@inficon.com. INFICON, Inc. strictly complies with all aspects of the Export Administration Regulations ('EAR'), including those sections dealing with deemed exports to foreign nationals.

Job DescriptionDescription Build your commercial energy client book—with 110+ supplier relationships, uncapped commissions, remote flexibility, and the support to win, renew, and expand accounts. Remote | 1099 independent contractor | Commission only—no base salary _ Why Join Us?Your ability to win clients deserves a platform that helps you keep them. Navigate Power and Verde Solutions give you the supplier access, deal support, and energy solutions to build relationships beyond the first contract.You’ll help commercial and industrial businesses compare electricity and natural gas offers, make informed contract decisions, and identify opportunities to reduce operating costs. As their needs evolve, you can bring additional solutions to the conversation—from efficiency upgrades to solar, EV charging, and battery storage. What you gain: • Supplier choice: 110+ supplier relationships nationwide to help you compete on pricing and contract options., • Support that moves deals forward: Pricing tools, proposal assistance, and back-office support from quote through renewal., • Resources to sharpen your approach: Training and marketing support for prospecting, presenting, and developing accounts., • Room to grow: Uncapped commissions and opportunities through new business, renewals, referrals, and additional client projects.You set your schedule and develop your market. You are responsible for generating and managing your own pipeline, including outreach, follow-up, and closing. Earnings depend on your sales results. This opportunity fits energy professionals and B2B sellers who want independence and have the discipline to build business consistently. What We Bring to the Table Navigate Power supports commercial and industrial energy procurement through supplier access, market guidance, contract strategy, and energy management. Verde Solutions brings the technical expertise and turnkey project support to help businesses improve efficiency, generate and store energy, and modernize facilities. Together, we give you more ways to solve client problems—and grow the account. Join Our Team Key ResponsibilitiesBuild your book of business with support from our pricing, operations, and project teams. • Generate your own pipeline: Prospect through direct outreach, referrals, business networks, partnerships, and existing relationships. Prioritize expiring contracts, high energy costs, facility upgrades, and businesses with multiple locations., • Reach the right decision-makers: Engage business owners, finance leaders, property managers, and facility teams around energy budgets, contract exposure, and operational priorities., • Turn client information into a strategy: Review utility bills, usage patterns, contract dates, and facility needs to identify potential savings and shape practical recommendations., • Make the options clear: Present electricity and natural gas proposals that explain supplier differences, pricing, contract terms, and market conditions in language clients can act on., • Develop opportunities beyond procurement: Introduce solar, EV charging, battery storage, efficiency upgrades, and sustainability projects when the economics and client priorities support them., • Lead the sale through close: Move opportunities from discovery to proposal and signed agreement, drawing on internal deal support and coordinating a clear implementation handoff., • Build the next opportunity into each account: Maintain accurate pipeline records, follow up consistently, and stay ahead of contract expirations to earn renewals, referrals, and additional business. Top Candidates Will Have • Demonstrated sales results: At least two years of sales experience, preferably B2B, with a record of winning clients and meeting or exceeding targets., • Ability to generate business: Comfortable prospecting, asking for referrals, and building relationships with business owners and decision-makers., • Consultative selling skills: Listen for business priorities, explain recommendations clearly, handle objections, and move conversations toward a decision., • Independent work discipline: Manage your pipeline, follow-up, and schedule consistently. Comfortable building income in a remote, 1099, commission-only role., • Energy experience preferred: Experience in energy consulting, procurement, or related fields is valuable. An established client book or professional network is a plus. Earnings, Independence & Support • Uncapped commission potential: $50,000–$250,000+ in potential annual commissions, based on your sales results. This is a 1099, commission-only role with no base salary or guaranteed income., • Control over your workday: Work remotely, develop your market, and set your schedule around prospecting, client meetings, and account growth., • Supplier access and deal support: Put 110+ supplier relationships, pricing tools, proposal assistance, training, marketing resources, and back-office support to work for your clients., • Earning opportunities beyond the first contract: Grow your book through renewals, referrals, and additional energy projects. Develop a team as your business expands.Build the Client Relationships. Have Support Behind the Deals. Bring your ability to prospect, earn trust, and close. Navigate Power and Verde Solutions provide the procurement platform and project expertise to help you serve clients as their energy needs grow. Apply to become a Commercial Energy Advisor with Navigate Power & Verde Solutions.

Job Description Pay Range: $20-$24 hourly About Us ADESA, a Carvana-owned company, currently operates in over 50 locations throughout the US. Our auto auctions, some up to 200 acres, provide a wide array of vehicle services, including repair, reconditioning, and auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America, from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion, including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team • Reporting to the Inspection Manager or another designated manager, you will be responsible for resolving vehicle representation differences between buyers and sellers. Responsibilities • Inspection Oversight: Oversee the quality and throughput of vehicle inspections to ensure accuracy and consistency across all reports., • Pipeline Management: Actively manage the WIP (Work-In-Progress) pipeline to ensure vehicles move efficiently through the inspection and arbitration process., • Arbitration Resolution: Resolve differences between buyers and sellers arising from representations made on the auction block, including mechanical, cosmetic, or disclosure issues., • Hands-on Quality Control: Conduct hands-on vehicle inspections when needed to verify vehicle condition and ensure high-quality standards are maintained., • Customer Liaison: Act as a professional point of contact for internal and external customers, providing prompt and courteous service regarding arbitration transactions and dispute resolution., • Technical Compliance: Understand and enforce the auction's arbitration policies, NAAA guidelines, and jurisdictional requirements., • Third-Party Coordination: Coordinate third-party inspections as required and maintain accurate record-keeping for all arbitrated units., • Reporting & Documentation: Maintain precise records of arbitration outcomes and provide status updates on the inspection pipeline to leadership., • Safety & Compliance: Ensure all company policies, safety protocols, and state/federal laws are followed at all times., • Other Duties: Perform any other duties assigned by the designated manager. Skills and Attributes • Technical/Mechanical Knowledge: Strong understanding of vehicle mechanics and the ability to perform basic diagnostic determinations., • Conflict Resolution: Exceptional ability to negotiate and resolve disputes between parties in a professional and unbiased manner., • Analytical Thinking: Strong problem-solving skills with the ability to interpret inspection reports and auction rules., • Communication: Excellent verbal and written communication skills to effectively interact with buyers, sellers, and internal teams., • Organizational Excellence: Proven ability to manage a high-volume WIP pipeline and multitask while maintaining strict attention to detail., • Customer Focus: Professional presence with a commitment to providing a high-quality, customer-focused auction experience. Qualifications • High School diploma or GED preferred, • Previous automotive auction, inspection, or mechanical experience required., • Must be 18 years of age and have a valid driver's license that meets the requirements, • Able to safely drive a variety of makes/models/sizes of vehicles, • Proficiency with computer systems, mobile inspection tools, and internal inventory databases. ADESA Values • Our Next Customer May Be Your Mom: Every customer deserves the same level of care and respect one would give to their own mother., • We're All in This Together: The company is unified by the shared goal of providing fantastic customer experiences, achieved through mutual trust, respect, and understanding., • There Are No Sidelines: Employees are encouraged to be proactive, work hard, and take ownership of what needs to be done in a fast-paced environment., • Be Brave: Employees should not fear taking risks, pushing themselves outside their comfort zones, or being decisive, even if they stumble along the way., • Zag Forward: The company empowers creative and passionate thinking to find meaningful ways to be different and deliver amazing experiences., • Don't Be a Richard: A simple guiding principle to act appropriately and professionally., • Stay Scrappy: This value rejects mediocrity and "good enough," pushing employees to do more with less to pass savings on to customers. ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Medium to Heavy Physical Work., • Constant - standing, watching, touching, listening, walking, talking, • Frequent - bending, stooping, kneeling, lifting, grasping, pushing, pulling, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors, and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note that this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Hidden Level is building the future of airspace awareness. Our mission is to make the unseen visible by providing persistent, actionable awareness of the low-altitude airspace around critical infrastructure, borders, military installations, airports, major events, and communities. Our technology brings together multiple sensing modalities and airspace data sources to detect and track cooperative and non-cooperative aircraft and UAS. Through our Airspace Monitoring Service (AMS), we transform that data into an operational picture that can be consumed directly through Hidden Level applications or integrated into the command-and-control systems our customers already use. Position Overview: As we expand, we are seeking a Sr. Product Manager, Airspace Monitoring Service (AMS) to own and advance the product vision, strategy, roadmap, and execution for one of Hidden Level's core offerings. This role sits at the intersection of our customers, engineering teams, operations, and business. The Sr. Product Manager will develop a deep understanding of customer missions and workflows, translate those needs into scalable product capabilities, prioritize what we build and why, and work closely with cross-functional teams to bring those capabilities to market. The successful candidate will be equally comfortable talking with an operator about how they use airspace data, working with engineers to define requirements and tradeoffs, analyzing product usage and performance, and communicating product strategy to company leadership. Location: This position may be based onsite or in a hybrid capacity at our Syracuse, NY office. Remote work may also be considered based on candidate location and business needs. Responsibilities: • Own the AMS Product Strategy and Roadmap, • Develop and maintain the product vision, strategy, and roadmap for AMS based on customer needs, market opportunities, company strategy, and technical capabilities., • Define the problems we are solving, desired customer outcomes, and measures of success before determining specific product solutions., • Prioritize product investments based on customer value, mission impact, technical feasibility, business value, and strategic differentiation., • Maintain alignment between near-term customer commitments and the longer-term development of a scalable product., • Represent the Customer and the Mission, • Develop a deep understanding of how defense, homeland security, public safety, and commercial customers use airspace awareness to support operational decisions., • Spend time with customers and end users observing workflows, gathering feedback, and identifying unmet needs., • Translate customer and operational requirements into clear product requirements and use cases for engineering teams., • Distinguish between individual customer requests and capabilities that should become part of the broader AMS product., • Drive Product Development, • Partner closely with Engineering Operations, Service, Deployment, Growth, and Customer Success throughout the product lifecycle., • Define requirements, priorities, acceptance criteria, and desired outcomes for new capabilities., • Make informed product tradeoffs when customer needs, technical constraints, schedule, and business priorities compete., • Identify dependencies, risks, and decisions required to keep product development moving., • Ensure teams understand not only what is being built, but why it matters to the customer., • Measure Product Performance and Adoption, • Establish and monitor product metrics related to usage, adoption, performance, reliability, and customer outcomes., • Use operational data, customer feedback, and product analytics to identify opportunities for improvement., • Develop feedback loops between deployed systems, customers, and product development., • Evaluate whether delivered capabilities are solving the intended customer problem and adjust the roadmap accordingly., • Support Product Introduction and Growth, • Partner with Sales and Customer Success to clearly communicate AMS capabilities, limitations, differentiation, and roadmap., • Support customer demonstrations, pilots, proposals, RFIs/RFPs, and strategic engagements where product expertise is required., • Help establish clear success criteria for pilots and deployments and translate successful customer outcomes into repeatable product offerings., • Support product releases, customer-facing documentation, training, and internal enablement., • Monitor competitive offerings, emerging technologies, regulations, and changes in the UAS and airspace-awareness market., • Interoperability and Ecosystem, • Help define how AMS integrates with customer C2 systems, third-party sensors, APIs, and other elements of the broader airspace-awareness ecosystem., • Work with technical teams and customers to ensure interoperability is considered as a core product requirement rather than an afterthought., • Identify opportunities for partnerships and integrations that increase the operational value of AMS. Required Qualifications: • Bachelor's degree in Engineering, Computer Science, Product Management, Business, or a related field, or equivalent practical experience., • 5+ years of relevant professional experience, including 3+ years in product management, technical product management, or a closely related role., • Demonstrated experience owning or materially contributing to the strategy and roadmap of a complex technical product., • Ability to translate customer problems and operational workflows into clear product requirements and priorities., • Experience working closely with software and/or hardware engineering teams., • Strong analytical skills and demonstrated ability to use data and customer feedback to make product decisions., • Excellent written and verbal communication skills, with the ability to communicate effectively with engineers, operators, customers, and executives., • Comfortable operating with ambiguity, making tradeoffs, and taking ownership of outcomes., • Willingness to travel approximately 10–20% to support customers, deployments, exercises, and other product activities. Preferred Qualifications: • Experience with B2B SaaS, enterprise software, defense technology, public safety technology, or other mission-critical products., • Experience with geospatial applications, command-and-control systems, sensor data, APIs, data fusion, or real-time operational software., • Familiarity with radar, RF sensing, Remote ID, ADS-B, UAS, counter-UAS, or airspace-management technologies., • Experience working with Department of Defense, Department of Homeland Security, federal, state, or local government customers., • Experience taking complex technical capabilities from early deployment through broader product adoption and scale., • Experience with Agile software development and modern product-management practices. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, disability insurance, and potential stock options. Salary Range: The salary range for this position is estimated at $134,000 to $174,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Equal Opportunity Employer: Hidden Level is an Equal Opportunity Employer. We consider all qualified applicants for employment without regard to race, color, religion, national origin, sex, pregnancy, sexual orientation, gender identity, age, veteran status, disability, or any other status protected by applicable federal, state, or local law. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position. Hidden Level Employees must be able to obtain and maintain a U.S. Government Security Clearance, if required for the position. Please click here to review the National Security Clearance Adjudicative Guidelines.

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Due to continued growth in the transmission and utilities sector, Turner & Townsend are seeking a all levels of Supply Chain/Procurement Management to lead strategic procurement initiatives across major infrastructure programs within the US. Key Responsibilities • Lead the development and execution of procurement strategies for large-scale utility and transmission projects., • Provide expert guidance on procurement models tailored to regulated utility environments., • Oversee the end-to-end procurement lifecycle, including RFP development, vendor evaluation, contract negotiation, and award., • Collaborate with engineering, construction, and regulatory teams to ensure procurement aligns with technical and compliance requirements., • Build and maintain strong relationships with utility clients, regulatory bodies, and key suppliers., • Drive innovation in procurement practices, including sustainability, digital procurement tools, and risk mitigation strategies., • Mentor and lead a team of procurement professionals across multiple project sites., • Ensure adherence to industry standards, regulatory frameworks, and internal governance., • Bring expertise in EPC/EPCM delivery models for large-scale, complex utility and transmission programs., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Qualifications, • Bachelor’s degree in supply chain, engineering, business, or related field (Master’s preferred)., • 10+ years of procurement experience in the utilities or infrastructure sector, with a focus on transmission or energy projects., • Deep understanding of FERC, NERC, and other regulatory frameworks impacting utility procurement., • Proven leadership in managing complex, multi-contract procurement programs., • Strong commercial acumen and negotiation skills., • Excellent stakeholder engagement and communication abilities., • Demonstrated experience managing procurement in North American utility markets, with familiarity in regional regulatory and commercial practices., • Experience managing procurement programs in the Northeast U.S., with knowledge of regional utility regulations, permitting processes, and supply chain dynamics. Additional Information On site requirements might change based on client needs Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Turner & Townsend does not accept any speculative or unsolicited CV’s that have been sent to our internal recruitment team or hiring managers from agencies outside of our preferred supplier list. Any speculative or unsolicited CV’s will be treated as a direct application. It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. #LI-MW3 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description Title: Automation Engineer, Level I Duration: 36 Months [NO BENEFITS] Location: Albany, NY (Hybrid: 50% onsite / 50% remote) Job Summary: The Automation Engineer will analyze requirements for state systems and document them to support implementation of a modernized Integrated Eligibility System (IES). Key Responsibilities: • Participate in rules extraction from existing state systems. This includes quality control tasks such as verifying 100% coverage and confirming the outputs are usable by business partners and business analysts., • Use the extracted rules to inform the to-be system’s business rules. Identify which rules carry forward and which are retired, in collaboration with agency business partners and within the project scope., • Identify and document as-is and to-be system requirements and design using the prescribed business analysis methodology, processes, and toolkit. This includes context diagrams, process flows, use cases, requirements traceability matrices, user interface specifications, and mockups., • Meet with stakeholders, including agency and local district subject matter experts, users, and executive teams, to elicit requirements., • Produce work products that keep system planning, design, and delivery aligned with business needs., • Conduct peer reviews of work products and assist in the internal review process, while adhering to project timelines and priorities., • Work with blended teams of state and vendor resources., • Perform other duties as assigned. Mandatory Qualifications: • 3 to 7 years of experience as an Automation Engineer., • 3 to 7 years of business analysis experience in state government within the human services domain, focused on Eligibility, Enrollment, and Case Management (EECM). This time must include eliciting requirements from stakeholders, analyzing and managing requirements through the full SDLC, and developing artifacts for business and technical stakeholders., • Fluency in producing business process flows, user stories, data dictionaries, wireframes, and specifications for a modernized eligibility system., • 3 to 7 years of experience on an Integrated Eligibility System (IES) modernization program, implementing transformed health and human services applications that align to state and federal standards. Desirable Qualifications: • 3 to 7 years of experience as an automation engineer performing business analysis and workflow automation for an eligibility system. This includes assisting with project planning and roadmaps, creating test scenarios, and managing change requests., • 3 to 7 years of experience collecting legacy interface information for state-supervised and locally administered applications, drafting Interface Control Documentation, and assisting with disposition of mainframe interfaces for a modernized solution.

Job Description Overview At Community Financial System, Inc. (CFSI), we are dedicated to providing our customers with friendly, personalized, high-quality financial services and products. Our retail division, Community Bank, N.A., operates more than 200 customer facilities across Upstate New York, Northeastern Pennsylvania, Vermont and Western Massachusetts. Beyond retail banking, we also offer commercial banking, wealth management, investment management, insurance and risk management, and benefit plan administration. Just as our employees are committed to helping our customers manage their finances, we’re committed to our employees. After all, they make it happen for our customers every day. To ensure our people can enjoy long and successful careers here at CFSI, we offer competitive compensation, great benefits, and professional development and advancement opportunities. As an equal-opportunity workplace and affirmative-action employer, we celebrate and support a diverse workplace for the benefit of all: our employees, customers and communities. Responsibilities Responsible for performing risk-based operational, financial, and compliance audits, in accordance with department methodology, applicable regulatory requirements, and the Institute of Internal Audit Global Audit Standards. This role supports the internal audit plan by executing audit procedures, evaluating internal controls, documenting work performed, and communicating results to audit management and stakeholders. The Internal Auditor works independently and collaboratively, providing objective assurance on the effectiveness of the organization’s governance, risk management and internal control processes. The role also supports advisory projects, external audit coordination, and continuous improvement initiatives of the department. In alignment with the Company’s and the Internal Audit Department’s core values, this position must demonstrate integrity, excellence, teamwork and humility while maintaining the highest standards of ethics, independence and confidentiality. Essential Duties: • Perform risk-based internal audit procedures to evaluate the design and operating effectiveness of controls., • Execute audit test-work and document results in accordance with the department methodology, applicable regulatory requirements, and professional standards., • Research and develop an understanding of the audit area, including relevant business processes, policies, procedures, systems, laws and regulations; participate in engagement planning., • Conduct audit testing in an effective and efficient manner, while monitoring progress against budget and communicating variances as appropriate., • Prepare clear, complete and well-supported workpapers, leveraging tools provided including the audit management system., • Apply self-review and quality control practices to ensure work is accurate, complete and ready for supervisory review., • Identify control weaknesses, root causes and opportunities for improvement, and assist in developing practical recommendations., • Build and maintain effective working relationships with audit clients through professional, timely and direct communication., • Communicate questions, concerns and emerging issues to the auditor in-charge and audit management in a timely manner., • Support the use of data analytics, automated testing techniques and other technology-enabled audit tools., • Demonstrate working knowledge of emerging technologies, including AI enabled processes., • Provide assistance to external auditors., • Support advisory engagements, special projects, strategic initiatives., • Develop in-charge capabilities and team coordination skills through progressively complex assignments, as applicable., • Maintain proficient knowledge of and demonstrate ongoing compliance with all laws and regulations applicable to this position, ensure ongoing adherence to pertinent policies, procedures, and internal controls, and meet all training requirements in a timely manner. Qualifications Education, Training and Requirements: Bachelor’s degree in Accounting, Finance, Business or related field required; Professional certifications such as CIA, CPA, CRCM, or CFIRS preferred, or progress toward certification strongly encouraged. Skills: Demonstrated ability to evaluate, challenge, and leverage AI-driven environments; strong analytical, problem-solving, and critical-thinking skills. Effective verbal and written communication skills with the ability to present observations and recommendations clearly. Ability to interpret, analyze and report financial, operational and compliance information. Knowledge of accounting principles, internal control concepts and internal audit standards. Experience: Minimum of two years of audit experience required. Experience in financial services including banking, wealth management, employee benefits, or insurance preferred.