Machine operator jobs in Edison, New JerseyCreate job alerts

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift: 7:00 AM - 3:30 PM Pay Rate: $17.00 2nd shift: 3:15 PM - 11:45 PM Pay Rate: $18.00 3rd shift: 11:00 PM - 7:30 AM Pay Rate: $19.00

Job Description Summary: In this position, the Installation Laborer Trainee supports the Construction Foreman with the goal of becoming proficient in the installation of fueling systems that include, but are not limited to tank installation, piping installation, dispenser installation and related mechanical systems that are used to operate fueling facilities & dispense fuel products. Responsibilities: ● Closely follows directions to operate machinery, hold or supply materials and tools, and load or unload items on machinery. ● May be trained to act as machine operator when the normal operator is out. ● Report any issues to supervisor or higher-level employees. ● Performs other related duties as assigned. Qualifications: ● Possess a valid driver’s license and be able to safely operate a construction truck. ● Physically fit with the ability to climb a ladder, stand, squat, shovel, and lift 75 lbs. from the floor to shoulder height. ● Complete daily reports, paperwork and submit construction site pictures daily. ● Must be able to fill out forms and have legible handwriting. ● Ability to listen, understand, and follow directions. ● Ability to work in a variety of roles. ● Must be articulate and possess a friendly, professional tone with internal and external customers and staff. ● Must be highly organized, detail oriented and be able to handle multiple tasks simultaneously. Benefits: ● Medical, Dental, and Vision Insurance are offered. ● Accrued paid time off. ● 401k. ● Paid Holidays. ● Paid Training and professional development assistance. Experience: ● Experience in measuring and cutting lumber for concrete forms. ● Experience with cutting asphalt & concrete with a gas-powered chop saw. ● Mechanical ability. ● Experience working with excavators / equipment. Not operating but working with someone who is running the machine. ● High School Diploma, GED, or equivalent. ● Manual Labor: 2 years (Preferred). ● Construction Work: 2 years (Preferred). ● Experience with petroleum equipment is a positive factor but not a requirement. An Equal Opportunity Employer: We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description Title: Production staff Work shift: 1st Shift (06:00~15:00, including 1hour meal break) Working date: Tue to Sat (OT Required including Holiday and Weekend) Pay rate: $19 Job Description: Help Production manager to achieve corporate and department objectives. Monitoring Production Line operation, ensure line operator follow all require procedure, report to Supervisor the daily production activity. Forward the information to Logistic department in case of not complete the production schedule. Help training new employee. Principal Tasks: (not limited to and subject to change) • Patrol production lines and GMP area., • Report any abnormal situations to supervisor., • Report Line stop and loss information to Teams message., • Contact Maintenance department when machine issue., • Contact QC department when production stop over 45 Min., • Fully understand company policies, Production SOP and SSOP., • Report to supervisor when found line operator not following rule and procedure., • Reviewing daily production record document. Report to supervisor if found any abnormal data., • Ensure daily production schedule completion. Report to supervisor if schedule been not complete., • Receive new line worker and set up the training video and document the training record., • Maintain safe and clean workplace., • Production Data input and Processing. Required Skill: • High School Diploma., • Microsoft Excel, Microsoft Word, Microsoft Power Point., • Strong Communication Skill and Reliability., • Knowledge of the applicable processes and related equipment. Physical Requirements: • Able to lift Minimum 40 lbs., • Require standing and walking for 50% of shift time., • Require sitting for 50% of shift time. Company DescriptionWe are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start! TOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. As one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. We have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. We have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America. Our Industries include: ●\tIT/Innovation ●\tManufacturing ●\tTrading ●\tLogistics ●\tEngineering ●\tOil & Gas ●\tCPA/Accounting ●\tFinance/Bank ●\tEntertainment If you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location. For more information, please visit our website. are a Talent Acquisition/People Operation (HR) group that connects people to careers and professional growth. Would you like to look for a new job opening to expand your career path or a new applicant for your opening position? Then you are in the right place to start!\r\n\r\nTOP Group has grown from a single office in New York in 1992, to one of the global leaders in Japanese-related talent solutions today. \r\n\r\nAs one of the first Japanese staffing agencies in the U.S., we started our focus in Finance but quickly expanded to other industries such as Technology, Freight Forwarding, Trading, and Manufacturing. \r\n\r\nWe have offices in New York - Head Quarters, San Francisco, Los Angeles, and Houston. \r\n\r\nWe have been expanding to Mexico to assist the Japanese corporations and become the #1 Japanese Recruiting Agency in Central America.\r\n\r\nOur Industries include:\r\n●\tIT/Innovation\r\n●\tManufacturing\r\n●\tTrading \r\n●\tLogistics\r\n●\tEngineering \r\n●\tOil & Gas\r\n●\tCPA/Accounting \r\n●\tFinance/Bank\r\n●\tEntertainment\r\n\r\nIf you are open to new job opportunities or interested in developing your career path, please follow our page, and let’s connect! You are more than welcome to InMail recruiters below. Unsure of which office to connect to? No worries! We will direct you to the nearest office for your desired location.\r\n\r\nFor more information, please visit our website.

Job Description About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position oversees the management of all related areas of manufacturing to produce products and direct activities for cards and may include other related products. The responsibilities will be all approved products are manufactured on schedule, within the quality standards of the company and customer ensuring cost effective measures are implemented. Will ensure increased level of customer and employee satisfaction while improving efficiency of manpower, materials and equipment. The Production Manager will work onsite 5 days a week out of our office in Somerset, NJ from 6pm - 2:30am. Key Responsibilities: 1. Supervision • Assist senior staff members in the development and formulation of long and short-range planning, policies, programs and objectives., • Manages policy deployment in the areas of lean manufacturing techniques, quality, cost reduction, and on-time delivery., • Identifies, recommends and implements changes to improve productivity and reduce cost and scrap, monitor scrap and rework data. Directs the establishment, implementation and maintenance of production standards., • Hires, trains, develops and evaluates staff. Takes corrective action as necessary on a timely basis and in accordance with company policy. Ensures compliance with current federal, state and local regulations. Consults with Human Resources Department as appropriate., • Directs and monitors department supervisors to accomplish goals of the manufacturing plan consistent with established manufacturing and safety procedures., • Acts as a liaison between department supervisors and subordinate levels, as well as executive/department manager levels to inform personnel of communications, decisions, policies and all matters that affect performance, attitude and results., • Achieves optimum employee levels with least amount of overhead and raw material costs to meet annual budgetary plan., • Ensure efficient staffing and equipment utilization of all production equipment., • Ensure production schedule is adhered to and that operators are properly trained to perform their duties in a safe and efficient manner and in accordance with applicable quality standards., • Provides leadership for employee relations through effective communications, coaching, training and development. 2. Production • Responsible for all production of cards., • Ensure job work orders and production schedules are available and properly utilized by all production personnel., • Ensure all operating procedures are aligned with the company's safety and security programs. Maintain and promote safe practices and procedures. Other Important Responsibilities: • Develop an operator cross training program which optimizes labor availability and utilization., • Establish and maintain an operations dashboard of key performance indicators which provides the vehicle for department objectives and improvement initiatives such as process yield, on-time delivery, machine efficiency, etc., • Monitor production performance and make recommendations for improvement., • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 10 years of relevant experience, • Ability to relate to employees and understand their needs., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent time management skills., • Task oriented excellent organizational skills, ability to prioritize work load;, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative., • Excellent problem solving skills., • Proficient in Microsoft Office Suite. Physical requirements and work environment: • Must be able to lift 50 lbs;, • Must be able to sustain office work as needed including the following:, • Sitting/standing as needed, • Computer skills required, • Telephone usage, • Must be able to sustain factory work for 8+ hours per day as required including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • For the most part, the position is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office environment., • Production floor exposure that require the use of personal protective equipment (PPE) ie: safety glasses, hearing protection, gloves etc., • This job operates in a professional office environment. The role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machine. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description Role Overview The Maintenance Technician & Trainer is responsible for advanced troubleshooting, repair, and maintenance of manufacturing and Packaging equipment, while also serving as a mentor and trainer for mechanics and operators. This role combines technical expertise with leadership, ensuring production continuity, conducting hands-on training sessions, and developing team skills in equipment operation, preventive maintenance, and troubleshooting. The position remains fully engaged in floor operations and is not exempt from performing direct technical work. Areas of Responsibility Technical Trainer: • Needs Assessment: Evaluate skill gaps in maintenance, mechanical/technical and machine operator teams and recommend or propose appropriate training., • Training program Development: Design and develop comprehensive training programs which outline the contents of the training along with instructional materials and training aids to teach individuals complex technical skills on equipment., • Training Delivery: Conduct on the Job training sessions including interactive troubleshooting sessions to teach technical concepts and practical skills to both maintenance and operational team members., • Program evaluation: Monitor and analyze the results of training programs and sessions to assess their effectiveness, gather feedback, and make necessary adjustments., • Attend FAT: Attend Factory acceptance testing for new equipment at manufacturers’ site, requires traveling both locally and internationally., • Support Equipment Installations & Validation: Provide support for new equipment installation by coordinating and working closely with manufacturer technicians and installers for the installation, commissioning and validation of new equipment while learning the new technology as well., • Trouble shooting: Assist in troubleshooting complex technical and mechanical issues on packaging and processing equipment., • Foster Teamwork: Maintain a work environment that supports teamwork and continuous process improvement., • Preventative Maintenance Coordination: Work closely with maintenance team to establish robust and effective preventative maintenance practices., • Document development: Assist in the creation of Preventive maintenance procedures and SOPs. Quality • GMP Compliance: Maintain proper growing and hygiene to ensure product integrity according to cGMPs and company policies., • Procedure Adherence: Follow batch records, SOPs, and cGMP guidelines to meet product specifications and tolerances., • Policy and Procedure Compliance: Ensure full compliance with company policies, procedures, GMPs, Ethical Business Practices, and SOPs always., • Foster Collaboration: Create an environment that respects and values diverse backgrounds., • Effective Communication: Establish and maintain effective relationships with peers, team members, and senior managers to ensure clear communication., • Goal Setting: Align goals and objectives with the organization for self and direct reports, create action plans, set milestones, and deliver progress reports and development plans for team members., • Employee Development: Develop employees to contribute to daily operational success., • Cross-functional Support: Learn and understand specific Facilities and Engineering operations to provide support in other areas as needed., • Safety and Responsibility: Work safely and responsibly to create an injury-free and incident-free workplace., • Training Compliance: Comply with all job-related safety and other training requirements., • Communication with Management: Keep management informed of area activities and significant Issues., • Extended Hours: Work extended hours, and occasional weekend overtime as required. Education & Qualification: • Degree Requirement: BA/BS degree in mechanical engineering with 3+ years of field experience., • Industry Experience: Minimum of three (3) years of work experience in nutrition, supplements, food, or pharmaceutical manufacturing industries., • None Required Skills & Ability • Teamwork: Demonstrates ability to work collaboratively and assist others., • Precision: Able to follow written instructions precisely and perform basic math calculations as required., • Regulatory Knowledge: Understands and is knowledgeable of cGMP, OSHA standards, etc., • Communication Skills: Ability to explain complex technical concepts clearly and effectively to diverse audiences., • Process Knowledge: Knowledge of processes including Blistering, cartoning, solid dose packaging etc..., • Lifting: Ability to lift 50 lbs. and occasionally lift and move up to 75 pounds., • Mobility: Must stand and walk on the production floor for a minimum of 6 hours per shift., • Manual Dexterity: Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, squatting, and walking short distances., • Flexibility: Occasionally works from a rolling ladder or step stool, able to lean over equipment, and kneel on the floor to clean under the equipment., • Manufacturing Setting: Work is regularly performed inside a manufacturing environment where temperatures can be moderate. Exposure to dust, odors, noise, and fumes is common. The noise level is usually moderate., • Chemical Exposure: Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Why Join BEUMER Group? BEUMER Group is a global leader in automated sortation solutions for e-commerce fulfillment centers. Our BG Sorter ET Tilt-Tray, BG Sorter CB Cross-Belt, BG Line Sorter, and BG Pouch System are designed to optimize performance and scalability for major e-commerce players. As a Controls Engineer II, you will contribute to the development and implementation of these state-of-the-art technologies, ensuring seamless integration with warehouse management systems and high-speed logistics operations that shape the future of online retail. Career Growth & Professional Development: At BEUMER Group, your career doesn’t just stop at Controls Engineer II—it grows with you. We foster an innovative, collaborative environment where engineers can expand their expertise through: • Ongoing mentorship and guidance from industry experts., • Advanced training in automation, machine control systems, and emerging technologies. BEUMER Group’s advanced sortation systems are transforming e-commerce fulfillment with high-speed, scalable, and cost-effective automation. As a Controls Engineer II, you’ll help integrate and optimize these solutions for some of the world’s leading e-commerce brands. Join a global leader driving efficiency and innovation in fulfillment operations. Be part of a team that's redefining digital commerce through automation excellence. Exciting Travel & Global Exposure: As part of the BEUMER team, you will gain international experience by working on high-profile projects with cutting-edge automation technologies. Whether commissioning systems across North America or collaborating with teams worldwide, you’ll develop invaluable expertise while exploring new opportunities in automation. Job Description General Responsibility Are you ready to take your engineering expertise to the next level? As a Controls Engineer II at BEUMER Group, you will play a pivotal role in designing and programming machine controls for cutting-edge high speed sortation systems that power the e-commerce industry. This hands-on position requires technical excellence, organizational skills, and strong communication abilities to ensure seamless automation and efficiency in high-speed fulfillment operations. Responsibilities: • Translate customer requirements into programmatic designs for BEUMER sorters., • Design and program operator panels and HMI systems for intuitive user interaction., • Prepare and test PLC hardware for projects, ensuring reliability and efficiency., • Collaborate with electrical engineering to define I/O networks and addressing., • Work with PC software developers to integrate machine control systems., • Conduct in-house emulation-based testing at BEUMER offices to validate system performance., • Participate in on-site commissioning, ensuring smooth deployment., • Create and maintain documentation to optimize workflow and improve processes., • Provide training materials to support operational excellence. Requirements & Skills: • Bachelor's or Master's degree in EE/CE or equivalent experience., • 3+ years of hands-on work experience in controls engineering., • Proficiency in advanced machine control concepts and fundamental mathematical techniques., • Demonstrated expertise in programming Allen-Bradley and/or Siemens PLCs at a "Program Development Level," enabling simple program modifications for a single processor. Capabilities include hardware selection, I/O assignment, and logical control sequence identification in a streamlined and iterative process—all meticulously documented and adhering to the company's programming standards., • Capability to develop and integrate SCADA systems for industrial automation, with a focus on Ignition SCADA platforms., • Ability to evaluate engineering challenges and develop innovative solutions, • Strong communication skills (verbal and written)., • Attention to detail and ability to learn quickly., • Team-oriented mindset with a proactive approach to problem-solving., • Time management excellence to handle multiple tasks efficiently., • Ability and willingness to travel nationally and internationally for project execution, up to 40%. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description As a Silicone (LIM Machine) Operator, you will play a crucial role in our production process, ensuring the efficient operation of Liquid Injection Molding (LIM) machines. You will work in a dynamic manufacturing environment and be responsible for the setup, operation, and maintenance of LIM machines to meet production goals and maintain product quality. Key Responsibilities: • Machine Operation: Set up, operate, and monitor Liquid Injection Molding (LIM) machines according to production schedules and quality standards., • Material Handling: Load and unload raw materials and molds, ensuring proper material flow and quality control., • Quality Assurance: Conduct regular quality checks to verify that products meet specifications and troubleshoot any issues that may arise during the production process., • Maintenance: Perform routine machine maintenance and cleaning to ensure optimal machine performance and minimize downtime., • Safety: Adhere to all safety protocols, maintain a clean and organized work area, and report any safety concerns.

Job Description Tablet Press Operator will set up, maintain, and run capsule machine. Operator will also be responsible for recording logs every 30 minutes, submitting samples to QC for approval, and for capsule quality. Capsule operator must not leave machine unattended while machine is running. Product quality to be checked at start up and after breaks. ESSENTIAL FUNCTIONS: · Set up press with floor supervisor. · Verify correct punches are used and in good order. · Feed material to hopper to run press. · Verify correct blend is being used. · Bring samples to QC for approval. · During run, controls for weights, thickness, and hardness are taken and recorded into a log every 30 minutes. · Responsible for keeping a log for every break, change in operator, and machine being stopped. · Monitor tablets coming off punch and dropped into container. · Responsible for tablet quality. · Must remain at machine while machine is running. · Responsible for machine’s routine maintenance and cleaning by following SOP instructions. · Responsible for taking samples from beginning, middle, and end of run and recording on log. · Label containers with correct information as described on batch ticket. · Work area must be kept in accordance with Good Manufacturing Practices. · Remove all trash at the end of the shift and clean room thoroughly. · Keep current equipment use and cleaning log. QUALIFICATIONS: Education: · Preferred experience in nutraceutical or solid dosage manufacturing. KNOWLEDGE, SKILLS AND ABILITIES: · Must be able to lift 50 lbs. · Must be able to bend, stretch, and stand for extended time intervals during work shift · Must have good oral communication skills to be able to complete work tasks as instructed · Ability to understand written and verbal instructions in English Company DescriptionReliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions: · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job Description We are seeking a Bindery Operator to join our printing press team. Our ideal candidate has experience with commercial machine operation, and you should be comfortable setting up or configuring automated cutters, saddle-stitchers, and folders. You should also have some mechanical skills to troubleshoot issues with equipment and replace worn parts as needed. This is partially a quality assurance role, so the ability to understand the parameters of each printing job and an eye for detail are essential. Bindery Machine Operator Duties and Responsibilities • Set up and operate commercial bindery equipment, including saddle-stitchers, folders, and cutters, • Ensure production quality, • Replace cutting blades as necessary, • Experience operating commercial bindery equipment, • Ability to understand production reports, • Physical stamina to stand for extended periods, • Ability to lift 50 lbs., • Mechanical skills, • Attention to detail

Job Description Machine Operator Location & Employment Type Full-Time | 1st & 2nd Shift Opportunities Schedule: * 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM * 2nd Shift: Monday – Friday | 2:00 PM – 10:30 PM Training: 2nd shift employees will train on 1st shift (6:00 AM – 2:30 PM) for the first three weeks. Pay Rate: $23.00 / hour Type: Temp-to-Hire Bilingual (English/Spanish) preferred Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities * Set up and operate production machinery according to established procedures. * Monitor equipment performance and make adjustments to maintain quality and efficiency. * Perform changeovers between production formats and assist with troubleshooting. * Conduct pre-operation checks and basic preventative maintenance. * Communicate with team members and supervisors to maintain continuous production flow. * Follow cGMP standards, food safety regulations, and plant safety guidelines. * Keep machines and work areas clean, organized, and safe. * Participate in continuous improvement initiatives. Required Qualifications * Minimum 1 year of machine operation experience in a high-speed manufacturing environment. * High school diploma or equivalent. * Ability to read, write, and communicate effectively in English. * Strong analytical and problem-solving skills. * Ability to work independently and as part of a team. * Willingness to be trained and adapt to new processes. * Basic math and computer skills. * Bilingual (English/Spanish) strongly preferred. Physical Demands * Ability to lift up to 50 lbs frequently. * Standing, walking, pushing, and pulling throughout the shift. * Occasional exposure to noise, temperature changes, and dust typical of a manufacturing environment. Work Environment * Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). * Fast-paced, team-oriented production floor. How to Apply / Next Steps If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Job Description Machine Operator Location & Employment Type Full-Time | 1st & 2nd Shift Opportunities Schedule: • 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities • Set up and operate production machinery according to established procedures., • Monitor equipment performance and make adjustments to maintain quality and efficiency., • Perform changeovers between production formats and assist with troubleshooting., • Conduct pre-operation checks and basic preventative maintenance., • Communicate with team members and supervisors to maintain continuous production flow., • Follow cGMP standards, food safety regulations, and plant safety guidelines., • Keep machines and work areas clean, organized, and safe., • Minimum 1 year of machine operation experience in a high-speed manufacturing environment., • High school diploma or equivalent., • Ability to read, write, and communicate effectively in English., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • Willingness to be trained and adapt to new processes., • Basic math and computer skills., • Ability to lift up to 50 lbs frequently., • Standing, walking, pushing, and pulling throughout the shift., • Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Job Description We’re seeking a reliable Machine Operator to set up, operate, and troubleshoot high-speed packaging equipment in a clean, safety-focused manufacturing environment. You’ll play a key role in ensuring production runs smoothly and delivering top-quality products consistently. Pay: $23.00/hour Schedule: 1st Shift (6am–2:30pm) or 2nd Shift (2pm–10:30pm) (2nd Shift positions will train on 1st shift for the first three weeks) What You’ll Do • Set up, operate, and monitor carton flow equipment, • Perform format changeovers and equipment checks, • Troubleshoot and solve issues quickly to minimize downtime, • Keep your area safe, clean, and compliant with cGMP standards, • Communicate effectively with your team to ensure seamless production, • Bilingual (English/Spanish), • 1+ year of machine or packaging equipment operation experience in a fast-paced manufacturing setting, • High school diploma or equivalent

Job Description An international plant-based manufacturing company is seeking a first shift Production Assistant who will help the production manager. • $19/hr. Plus full benefits, • Somerset, NJ Requirements of the Production Assistant: • Experience in working in a production environment, preferably in food manufacturing, but open to others, • HS Degree or equivalent required, • Physical strength and dexterity to lift, move, and handle equipment, • Proficient in Microsoft Office Suites, • Able to communicate, read, and understand in English, • Knowledge of the applicable processes and related equipment Responsibilities of the Production Assistant: • Monitor production lines and GMP areas and report issues to the supervisor, • Log line stops and losses via Teams, • Contact Maintenance or QC as needed, • Follow SOPs, SSOPs, and company policies, • Flag noncompliance and unusual data in records, • Support training for new line workers, • Keep workspace clean and safe, • Enter and manage production data, • Ensure daily production goals are met Employment Type: Direct Hire Schedule: 1st shift Tuesday – Saturday 06:00 a.m. – 03:00 p.m. Friday and Saturday off Production assistant, machine operator, production, Company DescriptionFor over twenty years, TriCom Quest has been a leader in the employment consultant industry, providing staffing services for both employers and job seekers, at virtually every level - from entry to executive. Our service spans the United States, providing placements for a broad range of companies, including those headquartered in the Pacific Rim with satellite offices within the United States. Yet what makes us stand out from the employment "crowd" is our service. Whether you're hiring employees or in search of a job, TriCom Quest is committed to quality service, from the very first handshake to placement, and beyond.For over twenty years, TriCom Quest has been a leader in the employment consultant industry, providing staffing services for both employers and job seekers, at virtually every level - from entry to executive. Our service spans the United States, providing placements for a broad range of companies, including those headquartered in the Pacific Rim with satellite offices within the United States. Yet what makes us stand out from the employment "crowd" is our service. Whether you're hiring employees or in search of a job, TriCom Quest is committed to quality service, from the very first handshake to placement, and beyond.

Job Description Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Packaging Department Packaging Reports to Supervisor, Packaging FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Packaging Operator is responsible for safely operating the packaging equipment to package in process products in accordance with company standard operating procedures and the packaging order. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the packaging work rooms. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Handle start up and shut down duties pertaining to equipment at the beginning and end of each shift., • Load and unload items into packaging machine and remove rejected packages to be isolated as rejects or re-inspection., • Execute packaging processes in accordance with packaging record/work orders., • Troubleshoot and make appropriate adjustments to machine to maintain packaging specifications., • Responsible for disposal of rejected tablets and packaging components in the designated area., • Responsible to clear any jams that do not require a mechanic, • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Other Responsibilities Including Safety: Education & Qualification: • High school graduate or GED equivalent and/or 1+ years in bottle, blister, and other assorted tablet packaging, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Must stand and walk on production floor a minimum of 8 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be able to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st: 7:00AM - 3:30PM 2nd: 3:00PM - 11:30PM 3rd shift 11:00 PM to 7:30 AM

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • High school graduate or GED equivalent, • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift: 7:00 AM - 3:30 PM 2nd shift: 3:15 PM - 11:45 PM 3rd shift: 11:00 PM - 7:30 AM

Job DescriptionSalary: $23-$28 Founded in 1986 and located in Middlesex NJ, BAMCO inc. is an award-winning industry leader in the design, manufacture and erection of building envelope systems servicing the architectural, developer and general contracting communities. We specialize in engineering, custom fabrication, bending, routing, welding and finishing in all types of metals from aluminum, galvanized and stainless to the exotics with a focus on safety, green initiatives and Lean Kaizen principles throughout. Our primary markets are pharmaceutical, health care, industrial, institutional and high-rise office and residential in the northeast corridor for installation and we service all 48 states with design and fabrication offerings as well. BAMCO is a 100% employee-owned company (ESOP) that prides itself with an unparalleled commitment to excellence for our customers, our company and all our stakeholders. We are currently seeking a Press Brake Operator to join our growing team. The Press Brake Operator is responsible for operating, maintaining and troubleshooting the machines. Keeping a clean and safe work environment while assisting others when needed and complying with all safety procedures. This position will functionally report to the Sheet Metal Foreman and work primarily in a group fabrication setting. Responsibilities: • Makes routine adjustments to bend programs up to and including tools at time to assure parts are within tolerance., • Must check parts against print using proper QC measuring equipment., • Load/unload machines and may check basic cross-reference information to assure correct part is being processed., • Assures that basic quality checks are performed at specific intervals on machine parts., • Performs routine maintenance on all machines to ensure optimal performance., • Monitor machine operation to detect any issues or malfunctions., • Must be able to read prints, set up and run various metal fabrication equipment., • Works responsibly and efficiently, adhering to all safety rules and policies., • Perform any other duties as required by Supervisor/Fabrication Manager to realization of departmental and company goals. Required: • HS diploma or equivalent., • 2+ years of manufacturing work experience., • 2+ years of press brake machinery experience. (preference on Trumpf press brake)., • Must be able to read blueprints and technical documents., • Must be able to check and measure parts according to technical document specification. Use of measurement tools, calipers, micrometers, etc., • Familiar with folding machines. Benefits: • 401(k), • 401(k) matching, • ESOP - Employee Stock Ownership Plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid time off (Holidays/Vacation), • Professional Development BAMCO inc. is not accepting unsolicited assistance from search firms. All resumes submitted by search firms to any employee of BAMCO inc. in any fashion without a valid written search agreement in place will be deemed the sole property of BAMCO inc. No fee will be paid if a candidate is hired by BAMCO inc. based upon an unsolicited referral. BAMCO inc. is an Equal Opportunity Employer.

Staffmark - JobID: 1954921 [Production Operator / Machinist] As a Machine Operator at Staffmark, you'll: Operate equipment and/or second operation machines through various tasks such as inspecting, trimming, testing, fixturing, assembling and packaging products; Monitor machine performance and make

Iron Mountain - 1065 Cranbury South River Rd [Production Operator / Machinist] As a Machine Operator at Iron Mountain, you'll: Operate turret forklift to collect, load, and put away warehouse items; Maintain equipment and ensure smooth operations; Monitor production processes and troubleshoot issues

Staffmark is hiring a Machine Operator to join a fast-paced manufacturing team in Somerset, NJ.