Trabajos machine operator en Pasadena, CaliforniaCrear alertas

Job Description P O S I T I O N D E S C R I P T I O N TITLE PACKER B DEPARTMENT Production SUPERVISOR Production Team Leader LOCATION Commerce A. PURPOSE Assure product is packed within established time. B. DUTIES The duties of this position are those described below. This job description does not state or imply that the duties listed are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. 1. Essential Duties These duties directly and substantially serve to achieve the purpose of the position. ♦ Receive and follow instructions from the Team Leader in charge. ♦ Pack, stack, pull, push and label product boxes & cases. ♦ Load/unload bread upon request, as instructed. ♦ Repack and assemble shippers. ♦ Inspect quality of product. ♦ Assist co-workers as required. ♦ Support machine operator as needed. ♦ Communicate any operational problems that may affect quality of product to Team Leader. ♦ Perform general housekeeping functions. ♦ Follow safety requirements at all times. ♦ Perform any and all tasks requested by the Team Leader or lead person. ♦ Understand and use Sugar Foods Corporation’s Core Values: 1. Be Prepared 2) Show Up 3) On Time 4) Follow Through C. Physical Requirements ( All requirements are subject to possible modification to reasonably accommodate individuals with a disability.) 1. Physical activities of this position. (Check ALL that apply.) ■ Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion. ■ Balancing: Maintaining body equilibrium to prevent falling when walking, standing or crouching on narrow, slippery or erratically moving surfaces. This factor is important if the amount and kind of balancing exceeds that needed for ordinary locomotion and maintenance of body equilibrium. ■ Stooping: Bending body downward and forward bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles. ■ Kneeling: Bending legs at knee to come to a rest on knee or knees. ■ Crouching: Bending the body downward and forward by bending leg and spine. ???? Crawling: Moving about on hands and knees or hands and feet. ■ Reaching: Extending hand(s) and arm(s) in any direction. ■ Standing: Particularly for sustained periods of time. ■ Walking: Moving about on foot to accomplish tasks, particularly for long distances. ■ Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward. ■ Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion. ■ Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles. ■ Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with the whole arm as in handling. ■ Grasping: Applying pressure to an object with the fingers and palm. ■ Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips. ■ Talking: Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other workers accurately, loudly or quickly. ■ Hearing: Ability to understand oral instructions in a noisy environment. ■ Vision: Visual inspection of areas to be cleaned. ■ Repetitive motions: Substantial movements (motions) of the wrists, hands and/or fingers. 2. Degree of physical exertion required for the position. (Check ONE.) ???? Sedentary Work: Exerting up to 10 lbs of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary Work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally and all other sedentary criteria are met. ???? Light Work: Exerting up to 20 lbs. of force occasionally and/or up to 10 lbs. of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for Sedentary Work and the worker sits most of the time, the job is rated for Light Work. ■ Medium Work: Exerting up to 50 lbs. of force occasionally and/or up to 20 lbs. of force frequently, and/or up to 10 lbs. of force constantly to move objects ???? Heavy Work: Exerting up to 100 lbs. of force occasionally and/or up to 50 lbs. of force frequently, and/or up to 20 lbs. of force constantly to move objects ???? Very Heavy Work: Heavy Work: Exerting in excess of 100 lbs. of force occasionally and/or in excess of 50 lbs. of force frequently, and/or in excess of 20 lbs. of force constantly to move objects 3. Environmental conditions the employee will be subject to in this position. (Check ALL that apply.) ■ Inside environmental conditions: Protection from weather conditions, but not necessarily from temperature changes. ???? Outside environmental conditions: No effective protection from weather. ???? Both environmental conditions: Activities occur inside and outside. ???? Extreme cold: Temperatures below 32 degrees for periods of more than one hour. ■ Extreme heat: Temperatures above 100 degrees for periods of more than one hour. ■ Noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. ???? Vibration: Exposure to oscillating movements of the extremities or the whole body. ■ Hazard: Includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. ???? Atmospheric conditions: One or more of the following conditions that affect the respiratory system or the skin: Fumes, odors, dusts, mists, gases or poor ventilation. ■ Oils: There is air and/or skin exposure to oils and other cutting fluids. ???? Humidity: Exposure to humid conditions ranging from 70 to 92 percents. ???? Respirator: Use is required. ???? None: No substantial exposure to adverse environmental conditions (such as in typical office or administrative work). D. EDUCATION/EXPERIENCE/SKILLS REQUIRED ♦ High School

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees. Summary: The Packer is responsible for packing finished printed materials to meet customer specifications, ensuring quality standards are upheld, and supporting the smooth flow of work in the cutting department. This position plays a critical role in the final stage of production by preparing completed jobs for shipment or delivery, maintaining accurate documentation, and ensuring all materials are handled safely and efficiently. Schedule: 2nd Shift, Monday-Friday, eight or more hours per day, five days per week based on business needs. Primary schedule will be 12:00 PM – 8:30 PM, or similar. This is an in-person position. Training may occur at other times. Salary Range: $18.00 To 19.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: • Work in collaboration with main Cutter Operator for provided instructions which will indicate specifications of form/batch cuts, • Identify quantity of form and type of stock to secure correct boxes for packing of product, • Off-load product from cutter tables and ensure order sticker label is eligible and visible for delivery, • Conduct initial inspection of products to ensure quality control, • To ensure compliance of orders, track inventory by physically counting product orders by order number, • Accurately and safely box completed jobs and notify quality control teammate/supervisor when completed boxes are ready for inspection, • Ensure materials on hand are organized and replenished, • To include boxes (to be made and kept on hand at inventory standard), tape guns, filling, chipboard dividers, markers, others as needed, • Place boxes in appropriate and safe floor locations under/near packing table, • Maintain bins, when full relocate to back lot for recycling and replace with empty bin, • Ensure set up is complete for shift change, • Complete and maintain all required paperwork, records, documents, etc., • Regularly perform general housekeeping duties in your work area(s), • Adhere to all safety policies and protocols and maintain a safe working environment, • Attend all department/company meetings EDUCATION, LICENSES, CERTIFICATIONS, AND/OR EXPERIENCES: • Problem-Solving and Adaptability: Strong problem-solving skills when faced with unexpected challenges, such as machine malfunctions, material shortages, or errors in print quality. Ability to adapt to new printing technologies or changes in production schedules, ensuring smooth operations despite changes., • Time Management & Efficiency: Ability to manage multiple print jobs simultaneously, ensuring deadlines are met without sacrificing quality. Organizing workflows, preparing materials in advance, and optimizing print runs for efficiency and cost-effectiveness., • Attention to Detail: Precision in monitoring print jobs to ensure all details, such as color accuracy, image sharpness, and print placement, meet the required standards. Detecting small defects or inconsistencies during production and taking corrective action immediately., • Communication Skills: Ability to read and understand corporate policies, job-related documents, and written/verbal instructions in English to ensure effective and compliant job performance., • Strong foundational math skills, with the ability to perform basic operations including addition, subtraction, multiplication, and division., • Highly detail-oriented, organized, and efficient in managing time, with a proven ability to meet deadlines and complete tasks accurately. 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • 9 Paid Holidays

Job Description Quality Inspector If you have inspection experience in a manufacturing environment and you are looking for a new position, we have an opportunity for you in a well established Aerospace company. In this role you will be responsible for inspecting various parts according to blueprints. Description: • Establishing quality standards for various products the company manufactures, • Reading blueprints and specifications to ensure that operations meet production standards, • Recommending any necessary adjustments and changes to production processes, • Inspecting and testing the materials and equipment, • Using gadgets such as micrometers, calipers, gauges etc Inspector, Micrometer, Caliper, Blueprints, Quality Inspector, Quality Control, Machine operator Pay: $20.00/hr-$24.00/hr (Plus Bonus) Location: Los Angeles Shift: We have both morning and swing shift 6:00am - 4:30pm - Monday - Friday 4pm-12:30am -Monday- Friday Aerotek offers you a rapid interview process with the company so you can start ASAP. Pay and Benefits The pay range for this position is $20.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Sep 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Responsibilities: • Works independently to meet maintenance and operational needs for machine maintenance and facility operation, • Will Install, service, dismantle, and maintain all types of Hi Vacuum and Thermal Cycling Equipment used for production testing, • Must have knowledge in Hi-Vacuum, Pneumatic, and Cryogenic Systems and Properties, as used in Thermal Vacuum and Test Systems/Chambers, • Maintain special constructed test equipment and perform preventative maintenance to all departments, • May be responsible for setup and alignment of machinery, test equipment, and provide guidance in machine relocation, • May be required to rearrange facilities as necessary, • will be required to be forklift and man-lift certified to Client standards, • Will be trained to the Client LOTO and Confined Space systems, • Will need to be available to respond to calls for Emergencies within Facilities or Production areas, • May need to communicate with Test Operations if a system is problematic outside of normal hours, • This role will also require the incumbent to be Test Operator certified to perform Thermal Chamber Test setup responsibilities, • Shall perform scheduled maintenance, troubleshooting, repair on: Production machinery, Assembly & Test Equipment, CNC Equipment, HVAC / Cleanroom systems, Electrical Service Equipment, Vacuum Pumps & Compressors, • Will be able to recommend appropriate corrective action required after system inspection, • Will have knowledge of spare parts inventory for time analysis of repairs requiredCompany DescriptionRGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Job Description Stamping machine operator Job Description A Stamping Machine Operator oversees the operation of stamping machines, ensuring precision and quality in production. Key responsibilities include machine setup, material feeding, routine maintenance, and troubleshooting. Responsibilities: • Operate stamping machines in a safe and efficient manner, • Monitor production output and ensure quality standards are met, • Perform routine maintenance on stamping machines, including cleaning and lubrication, • Identify and troubleshoot issues with stamping machines and make necessary repairs, • Collaborate with other machine operators and production team members to ensure smooth production flow, • Follow production schedules and prioritize tasks to meet production deadlines, • Maintain accurate production records and report any issues or concerns to the production supervisor, • 2 years Experience in operating stamping machines, • Knowledge of stamping machine maintenance and troubleshooting, • Ability to read and understand technical drawings and specifications, • Physical dexterity and ability to stand for long periods of time, • Attention to detail and ability to inspect finished products for quality control, • Ability to work in a fast-paced environment and meet production targets, • Strong communication skills to work effectively with team members and supervisors, • Willingness to work flexible hours and overtime as neededCompany DescriptionBe on time, work as a team, and work independentlyBe on time, work as a team, and work independently

Job Description Job Summary: Lloyd Mats by Covercraft is seeking a reliable and detail-oriented Sewing Machine Operator to join our team. This position involves operating a single-needle industrial sewing machine to stitch and bind heavy-duty automotive floor and cargo mats. The ideal candidate will be familiar with basic sewing machine operations and capable of making minor adjustments to support efficient, high-quality production. Key Responsibilities: * Operate industrial sewing machines (single needle) to stitch carpeted floor mats with precision. * Read and follow patterns, work orders, and quality guidelines. * Thread and rethread machines as needed during operation. * Adjust folders, guides, and thread tension to maintain stitch quality. * Conduct basic upkeep such as cleaning lint from the machine and oiling as required. * Monitor machines for irregularities and report mechanical issues promptly. * Inspect finished mats for quality and accuracy. * Maintain a clean, safe, and organized workstation. * Collaborate with team members to meet production goals. Qualifications: * High school diploma or equivalent preferred. * Experience operating sewing machines in a manufacturing setting is a plus. * Working knowledge of machine operation, including threading, tension adjustments, and folder setup. * Ability to perform light machine upkeep (cleaning, oiling) but not responsible for repairs. * Attention to detail and commitment to quality. * Strong communication and teamwork skills. * Dependable, punctual, and able to work independently. Physical Requirements: * Ability to sit and perform repetitive motions for extended periods. * Manual dexterity to operate machines and handle materials. * Occasionally lift up to 25 lbs. * Comfortable working in a moderately noisy production environment. Benefits: * Competitive pay * Health, dental, and vision insurance * Paid time off and holidays * 401(k) with company match * Advancement opportunities About Us: Lloyd Mats by Covercraft has been manufacturing premium, custom-fit automotive floor mats in the U.S.A. since 1978. As part of the Covercraft family, we take pride in precision, craftsmanship, and a commitment to quality that’s built into every product.

Job DescriptionVolt is immediately hiring a for immediate employment in Monrovia. As a Machine Operator / Forklift Operator you will: • Operate production machinery in a machine shop environment, • Operate forklifts to move inventory when needed (occasional), • General laborThis position is full time, M-F from 8:00 AM – 6:30 PM. It is temp for 18 months with chance of going temp to hire. Requirements: • 1 – 2 years of machine operating or manufacturing experience, • Forklift experience required Pay Rate: $18.78/hr ** Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that may include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description A food production machine operator is responsible for: 1. Operating machines to produce dried food products., 2. Setting up, loading, or starting food processing equipment., 3. Controlling flow rate, temperatures, and machinery settings., 4. Weighing, checking, and loading ingredients and packaging material for specific finished goods., 5. Monitoring output and making necessary adjustments during production processes., 6. Performing preventive maintenance and skilled repairs on complex electrical and mechanical production equipment and systems., 7. Follow standards procedures to monitor equipment for performance, safety, and effectiveness., 8. Coordinating with teams across departments and conducting quality assurance inspections. 9 . Operate and maintain machines in a safe and efficient manner 10. Troubleshoot and resolve issues with machines as they arise, 11. Maintain accurate records of production data and machine maintenance, 12. Stay up to date with changes in production technology and techniques

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Grinding Operator 2nd Shift Department/ Area: Grind Position Summary: Candidates will be responsible to set-up and operate #2 size CINCINNATTI centerless grinding machine – run small batch of blanks on machine and coach trainees. · Purpose: To prepare forged blank bolts into close tolerance machined parts ready for thread rolling, machine parts per process sketch following established procedures. Essential Functions: Install grinding and feed wheels on machine, position accessory tooling, balance, dress and adjust grinding wheel, using dresser with or without cams. Operate the machine. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Coaches a trainee and monitors quality for both. · Daily tasks: Maintain work area organized with required tools, inspection gages and instructions. Monitor production data and report at end of task or shift. Weigh count piece production. Participate in required training classes. Minimum Qualifications: • High School Diploma, • Working Knowledge of machines and tools Working Conditions: All day standing, repetitive manual motion, heavy physical work at time of some set-up. Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Position type: Schedule: • 2nd shift (02:30 PM to 11PM), • 8 hour shift This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Description: If you have machine operating or set up experience and you're looking for a new position ASAP, then this is the position for you. A very popular aerospace company in Sylmar who manufactures multiple high-technology components for the military, commercial industry and even space industry is looking for Machine Operators to join their team! Aerotek offers you a rapid interview process with the company so you can start ASAP. Skills: General labor / construction / General manufacturing / machine operating / Mechanically Inclined (Hands-On Person) Location: Sylmar Pay: Depending on Experience Shift: 1st and 2nd Positions with this company are limited and will be filled quickly Pay and Benefits The pay range for this position is $18.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Lake View Terrace,CA 91342. Application Deadline This position is anticipated to close on Sep 26, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description General Description: Competency with operation and general maintenance for such machines as Amada, Salvagnini, Bridgeport CNC, and other automated technology as needed. Flexible to work in the following work centers: manual machines, assembly line, subassembly work centers, and packaging. Essential Functions: • Select items via the Amada and Salvagnini system programs as appropriate., • Working with Engineering or the OEM vendor(s), adjust programs appropriate., • Prior to running the first part, verify that the program is up to the latest drawing revision and notify the lead or supervisor if any discrepancies are found., • Load raw materials into the laser machine using a forklift., • Ensure the integrity of the item by comparing it to a drawing(s)., • Notify immediate supervisor or quality control technician if product does not appear to meet specified standards., • Unload processed parts and dispose of metal scrap as per company scrap guidelines., • May be asked to work in various work centers as the need arises., • Works from assembly instructions, parts lists, wire lists, diagrams, verbal instructions, and notes to assemble, wire and install a wide variety of components, • Utilizes a wide range of tools including but not limited to drills, wrenches, screw drivers, and rivet guns., • Know how to read and follow assembly work instructions including drawings and schematics., • Assist with maintaining a safe, clean, and orderly factory., • Other duties as required. Education and General Requirements: • Minimum of 3 years manufacturing experience, • Minimum of 2 years’ experience operating Amada and Salvagnini machines., • Minimum of 1 year of experience working with machines such as press breaks, shears, and punch press type machines., • Assembly line experience, • Strong attention to detail., • Excellent manual dexterity

Job Description Description: An established foreign food manufacturer has expanded its business to the United States and is currently looking for a Machine Operator to join the production team. The incumbent will be responsible for operating specific designated production equipment in the assigned areas adhering to the facility Quality Management System Policies, including GMPs, SSOPs, HACCP program, safety protocols, etc, to ensure product quantity and quality. Responsibilities: • Be familiar with all the processes and procedures for operating the machines in the assigned areas, • Conduct product tests in the beginning of the production or after each changeover to ensure that the product quality meets the company standards, • Be able to conduct minor adjustments of the equipment Notify the production management of equipment malfunction or breakdown immediately, • Fill out different production forms to track the production results as required Notify the production management for any inaccuracies in the machines, • Equip yourself with all required PPE when performing the job, • Participate in health and safety training and monthly meetings to avoid violations of food cross contamination and workplace safety Address any questions and concerns on SOPs, food safety, and employee safety with the supervisor for prompt resolution High school diploma or GED equivalent preferred Minimum 2 year of experience in a fast-paced food manufacturing environment, machine operating experience required Ability to work in a diverse team environment Ability to do basic mathematical calculations Ability to read, write and communicate in English Ability to work 1st shift, any consecutive from 4:30 am - 3:00 pm, depending on assigned areas Must be flexible to work overtime and weekends as needed Physical requirement including frequent lifting up to 25 lbs., occasional lifting to 50 lbs., and infrequent lifting up to 100 lbs; For instances when employee is required to lift more than 50 lbs and 100 lbs they must work in teams of two or use the proper equipment and tools for the job/task at hand. Ability to walk and stand for at least 2 hours or more at one time; exposure to loud noise, dust, chemicals, etc. Language: Mandarin/English Company DescriptionOneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry. OneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively. Our loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow. We understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.OneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry.\r\n\r\nOneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively.\r\n\r\nOur loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow.\r\n\r\nWe understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.

Job Description We are seeking a Machine Operator 2nd Shift CNC to join our team! You will help oversee operational activities and ensure excellent quality control. Job Summary: The Production Machine Operator will safely control various machines and equipment involved in production. Supervisory Responsibilities: · None. Duties/Responsibilities: · Operates production machinery in accordance with prints and specifications. Assigned machines may include lathes, grinders, mills, and similar equipment. · Produces the required quantity of parts within established specifications and tolerances. · Measures finished parts with precision tools, ensuring compliance with function, quality, and cosmetic specifications. · Maintains logs and records of units produced including a record of errors resulting in rejected or discarded pieces. · Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments and maintenance. · Maintains a clean, safe, and orderly work area. · Performs other related duties as assigned. Required Skills/Abilities: · Ability to follow directions and work well in a team. · Ability to interpret and translate engineering designs and documentation. · Thorough understanding of or the ability to quickly learn production equipment. · Strong analytical and problem-solving skills. · Understanding of and the ability to abide by applicable OSHA and environmental regulations. · Proficient with Microsoft Office Suite or related software. Education and Experience: · High school diploma or equivalent required. · Associate’s degree OR completion of related apprenticeship program preferred. · At least one year of related experience required. · Completion of on-the-job training may be substituted for educational requirements. Physical Requirements: · Prolonged periods working on feet, using tools, and performing repetitive actions that entail frequent bending and stooping. · Must be able to lift up to 50 pounds at a time. · Visual acuity to read instructions, operate machines, and inspect parts produced. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Marking Machinist Operator Department: Marking Department/ Area: Shop Floor Position Summary: The candidate will be responsible for operating press for the purpose of impression of identification in fasteners manufactured for the aerospace industry under the tightest tolerances and quality requirements. After the training period, the candidate will be responsible for machine tooling and set-up. Daily tasks: Operate the marking press machines. Visually and dimensionally check samples. Enter production and quality data in computer reporting system. Maintain work area. Keep area clean and organized with required tools and inspection gages. Follow instructions and procedures. Monitor production data and report to supervisors. Weigh count piece production. Participate in training classes as needed and required. Minimum Qualifications: • High school diploma or equivalent, • Good communications skills Reports to Director of Manufacturing and Plant Manager Working Conditions: Repetitive manual motion, heavy physical work. Walking to monitor several machines. Lifting to 25 lbs and moving 40lb pans with dollies. Success Factors: • Ability to read a micrometer and caliper a plus, • Understand the marking operation a plus, • Bilingual a plus, • Simple blueprint reading and use of precision measuring tools, comparators and gages a plus Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description At Serve Robotics, we’re reimagining how things move in cities. Our personable sidewalk robot is our vision for the future. It’s designed to take deliveries away from congested streets, make deliveries available to more people, and benefit local businesses. The Serve fleet has been delighting merchants, customers, and pedestrians along the way in Los Angeles while doing commercial deliveries. We’re looking for talented individuals who will grow robotic deliveries from surprising novelty to efficient ubiquity. Who We Are We are tech industry veterans in software, hardware, and design who are pooling our skills to build the future we want to live in. We are solving real-world problems leveraging robotics, machine learning and computer vision, among other disciplines, with a mindful eye towards the end-to-end user experience. Our team is agile, diverse, and driven. We believe that the best way to solve complicated dynamic problems is collaboratively and respectfully. At Serve Robotics, we are reimagining how things move in cities. Our personable sidewalk delivery robot, Serve, is our vision for the future of delivery. It’s designed to take deliveries away from congested streets and onto underutilized alleys and sidewalks. Serve reduces emissions, relieves traffic, and makes deliveries both faster and cheaper. Why move a two-pound burrito with a two-ton car? What you’ll be doing As an Robotics Field Operations Associate at Serve Robotics you will be the primary operator in supporting commercial robot deliveries and product development. Your main objective will be to execute deliveries and help the organization drive process improvements that allow operations to scale. Whether you’re piloting, deploying and handling robots in the field, or supporting merchants and retail staff, you’re the point of contact during operations. You’ll also serve as the link between development and operations, supporting development tests and providing feedback to inform teams on the products and services we build. You will be the Swiss Army knife of Operations, with daily contributions adding up to have a significant impact on the organization. Key Responsibilities * Execute commercial end-to-end deliveries with Serve robots in market * Support robots in the field and act as the point of contact for issues that might occur * Aid in deployment of robots to and from market * Uphold efforts to maintain appearance and cleanliness of robots * Help maintain a clean and safe workplace that facilitates frictionless operations * Contribute to the development of processes and routines necessary to operate robots safely * Assist development and quality assurance efforts to improve the product * Provide feedback on product, tools, or features to the development team for iteration * Act as a point of contact for Serve merchants, customers, and stakeholders * Help with day-to-day decision-making to prioritize resources and execute test plans * Provide additional ad hoc operational support to the team as necessary Qualifications * Superior organization, collaboration and problem-solving skills * Ability to keep calm under pressure with a can-do attitude to meeting challenges * Ability to work independently with little need for supervision * Available to work scheduled shifts 7 days a week, day and night * Capable of spending multiple hours on your feet and walking/ biking several miles per day * Comfortable riding bicycle in city environment * Comfortable driving U-Haul sized vehicle * Valid US driver’s license * Ability to lift 70 lb * Background Check What makes you standout * Previous experience at high-growth, fast-paced startups * Familiarity with G Suite, with an emphasis on Google Docs and Sheets * Familiarity with Jira * Passion for efficiency, innovation and robotics * Previous military experience or security clearance * Passion for video games

Job Description Description: If you have CNC Operating, Setup or Programming and you're looking for a new position ASAP, then this is the position for you! A popular aerospace company in North Hollywood and Sylmar who manufactures various Aerospace Metals is looking for a CNC Machine Operators, CNC Machinists and CNC Programmers to join their team! Aerotek offers you a rapid interview process with the company so you can start ASAP. Relevant Skills (not required): CNC / Mill or Lathe / CNC Operating or Setup or CNC Programming / Blueprints / Aerospace is a plus / Micrometers - Calipers - Gauges / Tolerances Experience Level: Entry-Expert Level Location: North Hollywood / Sylmar Chatsworth & Valencia as well Pay: $18-50hr depending on experience Shift: Mon - Fri 1st shift 6am - 2:30pm 2nd shift 2pm - 10:30pm Apply right now and expect a call/text from Ryan with Aerotek 😊 Positions with this company are limited and will be filled quickly! Pay and Benefits The pay range for this position is $20.00 - $50.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in North Hollywood,CA 91605. Application Deadline This position is anticipated to close on Sep 25, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionSalary: $22.00-$25.00 DOE Superior Thread Rolling Co.has been an industry leader in the Aerospace and Precision Machining business for over 70 years. We lead by developing "out-of-the-box" solutions to the constant changes in quality, administration, lean processes, and state-of-the-art technical systems required by Aerospace prime contractors and their supply chain. We strongly believe that the true reason behind our success is due to our loyal and dedicated team. POSITION SUMMARY: CNC Machine operator of numerical control machines or machining centers to perform various functions, such as cutting, drilling, milling, reaming, boring, and broaching of metallic and nonmetallic workpieces, utilizing knowledge of machine tool capabilities, machinability of materials, and shop math. Will learn to Offsets machines, when necessary, with help from supervisor. Our 2nd shift runs from 2:30 PM-11:00 PM.This position offers a $2.00 Shift differential on top of the pay. ESSENTIAL JOB FUNCTIONS: • Offsets at machine to adjust tool into machining tolerances., • Is able to Operate Machines with Minimal help from the sup[ervisor, • Reads and interprets blueprints, planning sheets, sketches, and related technical data to determine tooling requirements, setup procedures, and machining methods and sequences., • Must be able to identify problems and get supervisor to troubleshoot the possible fixes., • Load parts per instructions, counts parts and sets machine controls to position spindle in relationship to work piece and coolant flow., • Starts machine and monitors displays and machine operation to detect malfunctions., • Stops machine to change cutting tools or to measure parts for conformance to blueprint specifications, using precision measuring instruments., • May learn to enter commands to offset and adjusts machine controls to correct malfunctions or outoftolerance machining., • Operates machine and can stop machine when tool or program malfunctions., • Cleans machine, tooling, and parts., • Performs machine maintenance as required., • Communicates with coworkers and supervisor to receive instructions and coordinate activities., • Inspects and measures parts to maintain statistical process control charts. JOB QUALIFICATION REQUIREMENTS: 2-5 years' experience and/or trade school. Experience operating CNC lathes and mills in an Aerospace Machine shop setting, reads and interprets blueprints. Must be able to use micrometers, calipers, and some inspection tools. Experience operating the following machines is desirable: Mori Seiki Duraturn 2550 Mori Seiki Duraverticle 5060 Mori Seiki NLX 3000 Mori Seiki SL4 Samsung SL40 Samsung SL2500SY Samsung SL2000 Haas VF-2 & VF-4 Fanuc Controls Company Benefits: • Medical,, • Dental, • Vision, • Holidays, Vacation & Bonuses, • 401(k) with matching company funds (Full Time Employees). Superior Thread Rollingis a smoke-free and drug-free workplace. All prospective candidates are subject to a pre-employment drug test and background check. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. To conform to U.S. export control regulations, requirements of this position include being eligible to work with export-controlled products and related data without restriction. Keywords: CNC Machinist, Inspection, Aerospace, Manufacturing, CNC operator, CNC 2nd Shift Lathe, Mill, Fanuc Controls

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS™) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Schedule: This is a 3–4 x10 rotating shift alternating Wednesday to Saturday or Sunday to Wednesday, 4:00 PM - 3:30 AM. Purpose We are seeking a highly experienced Additive Machine Technician to join our advanced manufacturing team. This role requires deep technical expertise in additive manufacturing processes, including machine setup, troubleshooting, powder handling, and post-processing. As a subject matter expert (SME), you will support the training and development of junior technicians, act as a backup to the Lead Technician, and help ensure excellence in part quality, equipment maintenance, and shop floor safety. While not a formal leadership position, this role is vital to driving technical best practices and operational efficiency across AM operations. The Role Technical Expertise • Set up, operate, monitor, and maintain AM machines according to established procedures., • Troubleshoot and resolve common technical issues, escalating complex problems as needed., • Follow process documentation to ensure part and process quality standards are met., • Conduct in-process checks and support process improvements where applicable., • Maintain detailed notes on key shift events, communicating clearly with the next shift to ensure smooth transitions., • Provide informal guidance and support to less experienced technicians when questions arise., • Support onboarding of new technicians by demonstrating proper procedures and safe practices., • Share expertise and help coach team members on tools, workflows, and basic troubleshooting., • Monitor shift progress and identify any equipment or material issues early., • Support supervisors and leads by offering technical input on machine status or operator performance when requested., • Collaborate with cross-functional teams (e.g., maintenance, engineering) to support production goals.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • 4+ years of hands-on experience in Additive Manufacturing, preferably in a production setting., • Experience in aerospace or automotive AM environments is preferred., • Familiarity with ISO 9001 or similar quality standards is a plus., • Experience with highly technical equipment such as MRI, CT, Xray, PLC Processing equipment, Vacuum Ovens., • Proficiency in operating and maintaining AM equipment and related post-processing tools., • Strong mechanical aptitude and problem-solving skills., • Team-oriented mindset with the ability to support and mentor peers., • Clear communication skills, both written and verbal., • Attention to detail, safety-conscious, and dependable. Work Environment Pay Range$29—$40 USD What We Offer: • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description Job description: Cold Header Operator Company: Sunland Aerospace Fasteners Primary Location: 12822 Pierce Street, Pacoima, CA 91331 Employment Type: Hourly | Full-Time Function: Manufacturing Production Equal Opportunity Employer Minorities/Women/Veterans/Disabled Main Duties & Responsibilities JOB SUMMARY: Completely and independently sets up and operates at the highest levels of complexity, all the various progressive header machines in use by the Company to perform operations such as forming, shaping, cutting, piercing etc. on various sizes and types of metal wire, bar stock etc. to required close tolerances per blueprint or other specifications. Operates other machine tools as necessary to produce tooling required for heading set-up and operation. Troubleshoots or reworks any progressive header problems concerning production parts. Must know how to operate National #89 Cold Header Machine. Will be working with many type of metals, Steel, 286, Inconel, ect. DESCRIPTION OF ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: 1. Reads and interprets blueprints or other documentation to determine machining required, tolerances held, and plans sequence of operations. Plans sequences of operations per manufacturing documentation or good shop practices when documentation is not available., 2. Completely and independently sets-up and operates all types of Progressive Header machine making required adjustments to diameters, grip lengths, depths, etc. to tolerances of ± .0007. Uses various support tools and equipment such as wrenches, pliers, calipers, micrometers etc. to set-up, maintain and repair machine. Heading machines set-up are single or multiple blow as well as single or multiple die or any combination thereof., 3. Loads wire or bar stock, positions and secures to holding device. Verifies feed position. Selects machine speed, tooling, and other variable tasks and items required based upon most efficient methods to maintain tolerances for material and tooling required., 4. Operates all types of Progressive Headers and Trimmer machines at highest levels of complexity as required for the completion of the various operations necessary on the workpieces being formed. Maintains visual check of work in progress to assure proper functioning of equipment. Performs any rework or troubleshooting of headed work performed by self or others., 5. Provides necessary counts, processes documentation correctly, and maintains daily production logs using computer software applications or production worksheets. Keeps interim records for subassemblies, material, tooling, rework, etc. while in the cell. Uses knowledge of SPC to monitor process control and ensure that acceptable inspection statistical results and records are maintained.., 6. Works as an active team member by participating in problem solving, team building, and all other team activities to improve the processes, productivity, quality, etc. of the production operations in a cell. Uses interpersonal skills as well as good written and verbal communications. Assists other cell members as required. Equipment/Process Responsibilities - Performs duties where property, tools, equipment, or machines may be damaged or man hours lost through improper daily maintenance and attention to processing. Sets-up and adjusts all types of Progressive Header machines to highest levels of complexity for the jobs performed. Maintains and effects repairs of machines and tooling. Material or Product Responsibilities - Performs duties that require close attention to work and supporting documentation specifications and other requirements. Responsible for accuracy of parts formed. Visually and/or with measuring instruments checks work performed for proper results Responsibility for Work of Others - Accuracy of communication is mandatory to the successful production and qualification of workpieces. Must communicate to appropriate personnel any problems or concerns regarding quality of work received or time flow of work in progress as it affects production schedules. Must be able to train employees of equal or lower classification in Progressive Header set-up and operation as well as on methods and procedures used by the Company in the production workflow and tracking. Safety Responsibilities - Good housekeeping, knowledge of good machine safety is necessary as well as adherence to Company Safety Rules. Initiative and Ingenuity - Requires initiative in solving problems associated with the set-up and operation of all types of Progressive Header machines and ingenuity in adapting tooling and shop aids to complete forming operations. Makes suggestions for improving the efficiency of work flow or equipment operation. Takes on or reports for additional work as current tasks are completed. Performs other work related tasks as deemed necessary by Company needs. WORK ENVIRONMENT: Environmental Surroundings - Work is in a machine shop environment where noise, temperature fluctuations, the repetitive nature of job, etc. are less desirable than in a typical office environment. Unavoidable Hazards - Possible hazards related to cuts, bruises, finger and hand injuries, muscle strains and burns. Exposure to moving mechanical parts, metalworking fluids, heating elements and airborne particles. Appropriate protective wear regarding eye, ear, and clothing are required. Physical - Able to lift up to 75 pounds. Requires strength to adjust requisite equipment to set-up specifications. Hand and finger manipulation in turning tools/valves/handles or operating knobs/cranks/buttons etc. as well as using precision measuring instruments. Able to reach, bend and stretch. Able to use tools required for machine set-up which may be fatiguing and require extensive physical exertion for extended periods of time. Most job assignments require continuous ' standing and/or sitting for periods exceeding 15 minutes at a time. Mental - Work at times is highly repetitive and monotonous. However during set-ups work varies and requires use of machine shop theory. Setups or machine repair may require improvisation and ingenuity. Reasoning ability required to interpret complex blueprints and documentation of a highly technical nature. Must be able to draw valid conclusions from a variety of abstract and concrete variables. Required to organize work flow for best efficiency. Visual - Close attention to detail with moderate eye concentration over long periods of time. Able to read various precision instruments such as micrometers, calipers, gauges, etc. Must be able to visually check workpieces for quality. Job Type: Full-time Work Location: In person Company DescriptionSunland Aerospace Fasteners has been dedicated to our customers success, with an exceptional commitment to excellence. We deliver manufacturing and service excellence.Sunland Aerospace Fasteners has been dedicated to our customers success, with an exceptional commitment to excellence. We deliver manufacturing and service excellence.

Job DescriptionDescription The responsibility of a Press Operator is to maintain and operate semi-automated production machinery. The goal of a machine operator is to produce defect-free components while keeping up with production schedules, and documenting product results for all components produced daily. To maintain product quality the operator must be able to read technical drawings, use standard measuring devices, follow production procedures and instructions, and records information as required. If the product being produced is not meeting requirements, the operator should be able to make minor machine adjustments to ensure conformity to requirements. The operator must maintain machine tools as well as surrounding areas, work well with others and follow directions. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, basic technical drawings, and procedure manuals. Mathematical Skills Ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to talk or hear. The employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms, and climb or balance. The employee must occasionally lift and/or move up to 25 pounds. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate-to-high. Department can get hot during the warmer seasons of the year. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now! Cold Heading Operator Department: SHOP Department/ Area: Cold Heading Position Summary: Candidates are required to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; to create a head on the bolt. Ability to go through the three progressive stations to complete the end product. Experience with materials such as inconel, titanium, 8740, and 4340 preferred. National #89 or Okuma 2 dies 3 blows preferred. Minimum Qualifications: High school diploma or equivalent. Basic math skills and English reading skills. Lifting up to 25 lbs and moving 40 lbs pans with dollies. Simple blue print reading and ability to use precision measuring tools (comparators and gages) a plus. Reporting Relationships: Report to the Cold Heading supervisor Working Conditions: All day standing, repetitive manual motion, heavy physical work. Standing most of the time. Candidate will be working on a powerful cold header machine to run batches of high strength bolts at a constant heated temperature of 1000°ree;-1100°ree; Success Factors: Willingness to learn and teach, attention to details, ability to work in a group and to memorize simple procedures for machining and checking. Bi-lingual is preferred. Good communication skills a plus Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\n Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description We are actively hiring for the position of Die Cutter Operator for our plant in Van Nuys, CA Shift: M-F: 1:30pm – 10pm Pay Range: $18 to $20 hourly. Actual compensation within the range will depend on a variety of factors including the individual’s skills, experience, qualifications, and applicable laws. Duties and Responsibilities • Access IMS program to determine priority jobs and set workload for the day., • Determine what size and pattern of die will be used to run the cutting job., • Observe the Die Cutting machine while running to make any adjustments and ensure a smooth and accurate cut is done on the patter., • Inspect the die cut job to ensure accuracy and quality before packing in designated box., • Record production and operational data using IMS system, such as entering completed jobs., • Report any and all workplace hazards to management immediately., • Ensure all equipment, tools, and workstation are in good working order and is free of any safety hazards., • Must be available for any required overtime based on business needs., • At least 1 year of experience using continuous and pile fed machines and packing Exp., • Good problem-solving skills., • Good organizational skills., • Attention to detail., • Good communication skills, • Ability to communicate effectively with Press Operator., • Ability to use hand/power tools and safe use of them., • Ability to multitask with changing priorities., • Able to lift up to 50lbs (50% of time), • Able to stand for 8 hours, • Walking and moving around work-area (50% of time) For further information on the digital room, please explore our website

Job DescriptionOperate with Purpose – Power Environmental Protection with TAIT Why TAIT? • Purposeful Work – Protect communities and the environment through vital UST inspections, • Growth Opportunities – Advance your career with leadership potential and certifications, • Expert Team – Join a trusted group of compliance and environmental professionals, • Ongoing Training – Build skills with hands-on experience and tech-enabled tools, • Safety-Focused – Operate confidently with proven protocols and strong supportReady to grow with us? Apply today and start your journey with TAIT! Position Description This position will require a background check, MVR, and physical/drug screening. The Designated Operator will be responsible for scheduling and conducting inspections for a portfolio of mandated 30-day Underground Storage Tank (UST) inspections, primarily in the Los Angeles area. Must follow Designated UST Operator procedures and perform all duties of the Designated UST Operator on behalf of the client. A TAIT service vehicle will be provided. Essential Duties and Responsibilities • Schedule appointments with tank owners or site management as necessary for each site visit., • Use personal vehicle (or TAIT service vehicle) to travel to 50+ UST facilities per month., • Completely and accurately fill out the monthly UST inspection checklist and submit on time., • Enter inspection data into an online web-based data collection system using company laptop, submit data on time., • Train client’s facility personnel when needed., • Explain observations from visual inspection to appropriate client site personnel., • Immediately communicate all non-compliance risks to the program coordinator., • Follow company safety procedures including safe motor vehicle operationMinimum Qualifications and Skills, • ICC certified Designated UST Operator experience., • Use laptop, computer and printer along with ability to email, as well as learn and use TAIT specific applications or Microsoft programs., • Ability to review and interpret reports and documents., • Ability to conduct group training events., • Ability to work effectively & professionally with clients., • Knowledge of UST systems and current regulations regarding their proper operation., • Valid Driver’s License., • A current or prior ICC Designated UST Operator certification., • Knowledge of UST systems and current regulations regarding their proper operation., • Excellent communication and organizational skills and a desire to function in a position of high visibility both internal and external to the company., • Self-direction and ability to work alone., • Good organization and scheduling skills.Physical and Additional Requirements, • Complete background check, MVR, physical examination and drug screening., • Ability to drive extensively up to 1000 miles per week., • Ability to speak clearly & professionally to communicate with clients., • Ability to drive a vehicle to job sites and ability to drive extensive distances, occasionally up to 1000 miles per week., • Ability to walk on job sites that may be dirt, cement, asphalt, uneven concrete, other. Benefits TAIT invests in you by providing a comprehensive compensation and benefits program along with the opportunity for professional growth and development. Our benefits package includes valuable and affordable options for health, dental, vision, employer paid life insurance, 401(k) with match, generous paid time off and other supplemental benefits. TAIT’s core value is its culture of kindness. With this, you’ll find a family-oriented environment and flexibility to manage work and life with a rewarding career. Here are some benefits you can find when you join the TAIT Team: • Flexible Work Schedule Options - Remote, Hybrid, In-Person, • Medical options including PPO and HDHP with Health Savings Accounts (no extra charges for spouse or dependent coverage), • Dental Plans with little to no deductible, • Vision PPO plan that’s accepted widely from local offices to large retailers, • Company paid Life Insurance, • Voluntary Life, Accident and Critical Illness plans, • Dependent Care and Flexible Spending Accounts, • Employee Assistance Program, • Retirement plan 401(k) with employer match, • Paid time off to relax and recharge with vacation, holidays, and sick time., • Annual memberships with Strava and Headspace for additional health and wellness benefits, • Maternity and Paternity leave time options to care for the newest little family members, • Support for professional growth and development., • Corporate Lodging Program (CLC) TAIT is an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, age, sex, sexual orientation, gender identity, religion, national origin or any other legally protected status. Consistent with the Americans with Disabilities Act, the company will make reasonable accommodations to assist in the application process upon the request of an applicant. No question on this application is intended to secure information to be used for discriminatory purposes. California Applicants - view the CA Privacy Notice here before submitting your application. Powered by JazzHR 6pv5CH8gzI

Job Description CNC Operator Locations: South El Monte, CA Pay: $16.50 - $33.00 per hour Schedule: Monday–Friday, 6:30 AM – 3:00 PM (Overtime opportunities available) ???? Get a feel for our shop and culture: Watch our video About the Job We're looking for CNC Operators to run our CNC lathes and mills. You’ll help keep machines running smoothly, check parts for quality, and work with the team to get the job done right. What You’ll Do • Operate CNC mills and lathes, • Load tools, materials, and run basic programs, • Make offsets and basic edits with support, • Inspect parts with calipers, micrometers, and gauges, • Follow safety and machining best practices, • Change and set tooling with correct offsets, • Troubleshoot issues and make basic program edits, • Run multiple machines at once, • Understand advanced movements and offsets, • Use all shop inspection tools confidentlyWhat You Need, • CNC experience is a plus, but we will train the right motivated applicant, • Able to read simple blueprints and measurements, • Comfortable with G/M codes and machine controlsPhysical Requirements, • Able to lift up to 50 lbs and stand for long periods, • Use hands for tools and fine adjustmentsWhy Work With Us, • Health Coverage: 100% paid medical, dental, and vision for employees, • 401K + Profit Sharing, • Paid Time Off: 2 weeks after 1 year, 3 weeks after 5 years, • 7 Paid Holidays, • Perks: Monthly catered lunches, work boot & safety glasses allowance, employee discounts 6:30 AM – 3:00 PM, Monday to Friday (with overtime opportunities)

Job DescriptionDescription: Job Summary: Our company is searching for a talented machine operator to oversee our computer numeric controlled (CNC) machines. You will be responsible for ensuring our company produces quality parts specific to engineering drawings and client standards. Duties/Responsibilities: • Set-up and manage CNC machines to perform different jobs including drilling, grinding, and milling, • Translate engineering drawings and requirements into dimensions for production, • Oversee the machines while they execute the tasks and make the necessary changes to produce improved results, • Strong math skills and knowledge of tool and work offsets, • Ability to analyze prints or other documents to make sure the final part matches the print, • Experience with operation and set up of CNC Mills/Lathes, • Perform daily maintenance on the machinery, • High school diploma or equivalent highly preferred., • Prolonged periods of standing, • Must be able to traverse production facility, • Must be able to lift up to 15 pounds at a timeAllan Aircraft Supply Co. LLC is an Equal Opportunity Employer

Job Description Summary of Position: The ideal candidate will have the know-how of a Programmer as well as the skills of an Operator. The CNC Programmer develops part programs for CNC lathes, 3-axis mills, and waterjet cutters. The programmer develops machining strategies for parts and uses CAM software to generate machine code and documentation for the machine operators. The Operator duties include being responsible for proper set-up, operation, and maintenance of CNC machinery and the CNC shop area. The applicant will have a working knowledge of CNC machine tools and their controls, general machining operations, and tooling as well as have a strong grasp of fundamental work holding on various machine tools, CNC coordinate systems and their offsets. Description of Duties, Including but Not Limited To: · Using information and drawings from the technical design department, the programmer develops an efficient overall production strategy for parts. This strategy includes material to be used, machine operations and their sequence, and work holding techniques · Work through first article inspection and make any changes necessary · Perform machine set-up for all parts. This includes tooling set-up and measurement, work fixturing and locating, first run proofing, minor editing , first article inspection, and production · Maintain CNC machinery according to maintenance schedules. This includes lubrication, coolant maintenance, and general inspection and maintenance of the machinery Job Requirements: · Applicant should have at least 2 yrs. applicable training or work experience. · Must possess solid troubleshooting and communications skills · Ability to read and comprehend shop drawings · Solid programming background using MasterCAM · Knowledge of Fanuc and Haas controls · Must be able to edit or create part drawings or models in MasterCAM -Working hours are typically 6am - 2:45 pm, however longer days will be necessary when the workload requires it -Ability to work long hours and weekends when needed. Company DescriptionThe Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.The Scenic Route is a design-build production company that provides services for the entertainment, live event, touring, museum, government and trade show industries. We offer services ranging from master planning, concept design and project management to fabrication, construction and installation. Our customer service and commitment to finding the finest solutions to even the most complex problems have made The Scenic Route one of the most sought-after creative resources in the country.

Responsibilities: • Works independently to meet maintenance and operational needs for machine maintenance and facility operation, • Will Install, service, dismantle, and maintain all types of Hi Vacuum and Thermal Cycling Equipment used for production testing, • Must have knowledge in Hi-Vacuum, Pneumatic, and Cryogenic Systems and Properties, as used in Thermal Vacuum and Test Systems/Chambers, • Maintain special constructed test equipment and perform preventative maintenance to all departments, • May be responsible for setup and alignment of machinery, test equipment, and provide guidance in machine relocation, • May be required to rearrange facilities as necessary, • will be required to be forklift and man-lift certified to Client standards, • Will be trained to the Client LOTO and Confined Space systems, • Will need to be available to respond to calls for Emergencies within Facilities or Production areas, • May need to communicate with Test Operations if a system is problematic outside of normal hours, • This role will also require the incumbent to be Test Operator certified to perform Thermal Chamber Test setup responsibilities, • Shall perform scheduled maintenance, troubleshooting, repair on: Production machinery, Assembly & Test Equipment, CNC Equipment, HVAC / Cleanroom systems, Electrical Service Equipment, Vacuum Pumps & Compressors, • Will be able to recommend appropriate corrective action required after system inspection, • Will have knowledge of spare parts inventory for time analysis of repairs require

Job Description CNC Programmer/Setup Operator Hours: 6:00am-2:30pm (8hr) + Overtime as needed Pay: 25 – 35/hr S&S Numerical is a leading aerospace company supplying our customers with the highest quality interior cabin assemblies. This position is for a backup CNC programmer/setup operator. Focusing on editing programs and helping other operators with setups as needed. Key Responsibilities • Create/edit part programs using Mastercam, • Perform advanced level setup of machines, • Read and edit G and M code on haas machines, • Work with machinists during test run of program to ensure process is good, • Verify conformance of finished work piece to specifications using standard measuring tools, • Understand and comprehend all forms of technical documents including blueprints and drawings, written specifications, charts, tables, etc., • Maintain a track record of high-quality work with low rework and scrap history., • Maintain high efficiencies and run rates for given machine., • Work safely and as part of a high performing team., • Perform other duties as assigned, • Basic machine maintenance, • Conformance to FOD policy, • Document work completed and maintain accurate records Requirements • Works independently, follow instructions and demonstrates strong attention to detail, • Properly uses basic measuring tools (calipers, micrometer, indicators, etc.), • Understanding of basic machine language (G and M codes), • Strong communication skills, • Mechanically inclined, with good manual dexterity, • 2 years of CNC programming experience Experience • 5 axis operation/setup/programming a plus, • Experience working with low volume, high value parts, • Ability to fabricate fixtures, jigs or parts using machining equipment, • Bilingual a plus (Spanish) Benefits • Healthcare (dental, vision), • Life Insurance, • Paid Time Off

Job Description We are seeking an ID/OD Grinder Operator who understands the craft of machining supporting many industries from Aircraft Parts to Food Processing Equipment, we are a certified FAA Repair station servicing the Los Angeles area since 1947. For over 50 years our family owned and operated company has provided Chromal Plating and is the leading provider of hard and thin dense chrome plating, grinding, honing, etching, passivation, shot peening, and inspection services for companies in Southern California and across the nation. Our position offers outstanding opportunities to individuals seeking continuous improvement, achievement of positive results, and are motivated to contribute their talents. We are a local machine shop that encourages teamwork, compatibility, and open-door policy to management. If you believe you could fit in with our team, we’d like to hear from you. Responsibilities Include: * The ID/OD Grinder is responsible for operating and maintaining grinding equipment to fabricate high-quality precision components. Expertise in setting up and running ID/OD grinding machines coupled with meticulous attention to detail to ensure compliance with engineering specifications and tight tolerances. * Set up and operate ID/OD grinding machines to craft precision parts based on engineering drawings and specifications. * Execute grinding operations on diverse materials, such as metals, alloys, and chrome, to attain desired dimensions, tolerances, and surface finishes. * Possess knowledge of working properties of Aerospace metals and skill with Grinding Machines to plan, set-up & carry out the operations needed to make ground products that meet their precise specifications. * Able to read blueprints. * Adjust machine settings as required to optimize production efficiency, surface finish and uphold quality standards. * Employ precision measuring instruments like micrometers, calipers, and bore gauges to scrutinize finished parts and ensure adherence to specifications. * Identify and troubleshoot issues pertaining to machine performance, tooling and workpiece quality and implement corrective measures as necessary. * Adhere strictly to all safety protocols and procedures to foster a secure working environment for oneself and colleagues. * Maintain meticulous records of production activities, encompassing machine settings, tooling changes and inspection outcomes, in accordance with company policies and regulations. Required Skills: * Minimum 3-5 years ID/OD Grinding experience (Manual & ID/OD Grinders). * Mechanically inclined individual with good problem-solving ability. * Able to produce accurate work (tolerances reach +/-.0005” of an inch). * Mathematical machining skills required. * Proficient working with conventional & ID/OD grinders. * Minimum of a High school diploma or equivalent. We offer a competitive compensation, benefits and retirement package. Pre-employment and random substance abuse testing is mandated by the FAA. Shift: 7:00AM-3:30PM M-F with options for Saturday and O/T available. Equal Opportunity/Affirmative Action Employer, M/F/D/V.

Job Description Matrix LLC is a high-production custom cabinet manufacturing plant specializing in precision-crafted cabinetry. We utilize state-of-the-art CNC machinery with automated loading and unloading systems to deliver top-quality products. Join our team to contribute to a fast-paced, innovative production environment. Job Description: We are seeking a reliable and computer-literate CNC Machine Operator to join our cabinet production team. This role involves operating CNC machines to process 4x8 wood sheets for custom cabinetry. All programs are pre-loaded from the office, so no programming experience is required. Key responsibilities include: • Loading wood sheets onto the CNC machine using a forklift (forklift certification preferred but not required)., • Scanning barcodes to initiate pre-set programs via a computer interface., • Monitoring machine operation and ensuring quality output., • Offloading finished parts using automated systems and organizing them onto dollies for further processing., • Maintaining a clean and safe work area in compliance with shop safety standards. Qualifications: • Proficient in English (written and verbal) for effective communication and computer interface navigation., • Computer literacy, including the ability to use basic software and follow digital instructions., • Experience in woodworking, cabinetry, or CNC operation in a manufacturing environment is a plus but not required., • Strong work ethic, attention to detail, and ability to work efficiently in a fast-paced production setting., • Forklift experience or certification is preferred; training may be provided for the right candidate., • Ability to lift up to 50 lbs and stand for extended periods. Compensation & Benefits: • Starting pay: $19–$25/hour, based on experience and performance., • Paid time off, holidays, and opportunities for overtime., • Potential for pay increases based on productivity and reliability., • Training provided for forklift operation and CNC processes. Work Schedule: • Full-time, Monday–Friday, 8:00AM–4:45PM, • Occasional overtime may be required to meet production demands. Company DescriptionMatrix has a history over the last 27 plus years of being leaders in the industry by using innovative strategies to grow, stay competitive and be unique. We have multiple divisions with the 2 main being our Cabinet manufacturing plant and our Cabinet hardware store. In our plant we specialize in Cabinet parts and components serving the cabinet tradesmen while also maintaining high end contractors as clients in our Millworks division as the on cite Cabinet maker. Our 3rd division is our Cabinet Hardware store serving both Cabinet tradesmen & contractors s well as home owners. Most of our sales are local while we do offer shipping.Matrix has a history over the last 27 plus years of being leaders in the industry by using innovative strategies to grow, stay competitive and be unique. We have multiple divisions with the 2 main being our Cabinet manufacturing plant and our Cabinet hardware store. In our plant we specialize in Cabinet parts and components serving the cabinet tradesmen while also maintaining high end contractors as clients in our Millworks division as the on cite Cabinet maker. Our 3rd division is our Cabinet Hardware store serving both Cabinet tradesmen & contractors s well as home owners. Most of our sales are local while we do offer shipping.

Job Description About the Role We’re looking for a skilled and detail-oriented Wide Format Operator to join our production team. This person will be responsible for running and maintaining our wide format equipment, ensuring high-quality output, and helping keep our production area and warehouse organized. Key Responsibilities * Operate and maintain wide format printing and finishing equipment, including: * Arizona Flatbed Printer * HP 360 Latex Printer * Roll Laminator * Colex Cutting Machine * Perform daily machine setup, adjustments, and preventive maintenance. * Ensure jobs are completed accurately, efficiently, and on schedule. * Inspect finished products for quality and accuracy before packaging. * Assist with warehouse organization, inventory management, and maintaining a clean work environment. * Follow safety procedures and best practices in all production areas. Qualifications * Previous experience with wide format printing equipment preferred. * Strong attention to detail and quality. * Ability to read and follow job tickets and specifications. * Comfortable working in a fast-paced production environment. * Basic mechanical skills and troubleshooting ability. * Reliable, organized, and a team player. Physical Requirements * Ability to stand, bend, and lift up to 50 lbs. * Comfortable working around large-format machinery and warehouse equipment. Benefits (optional – add what applies to you) * Competitive pay based on experience * Health benefits * Paid time off * Opportunities for growth within the company Company DescriptionEMSLO, Inc dba AV Graphics, Inc is a commercial printer that has seen continued growth over the past years. We supply customers folding carton packaging and commercial printing. We offer traditional offset 4 color printing as well as 2 color and digital printing. We also offer several in house finishing techniques like cutting, folding, die cutting, folding and gluing.EMSLO, Inc dba AV Graphics, Inc is a commercial printer that has seen continued growth over the past years. We supply customers folding carton packaging and commercial printing. We offer traditional offset 4 color printing as well as 2 color and digital printing. We also offer several in house finishing techniques like cutting, folding, die cutting, folding and gluing.

Job Description WET DESIGN Sun Valley, California CNC Machinist Operator - 2nd Shift Schedule: 2:00 PM to 12:30 AM WET is pushing the boundaries for manufacturing innovation. We are looking for an experienced CNC Machine Operator to produce and fabricate parts and components used for research and development in our world class manufacturing facility. About the Role We are seeking a skilled Machinist Operator with at least 5 years of experience in a manufacturing or engineering environment. In this role, you will be responsible for efficiently loading materials, operating manual or CNC machines, monitoring production runs, unloading finished parts, checking for quality and supporting live Production activities. You will not be responsible for machine setup, but your experience will ensure safe, accurate, and high-quality output. Key Responsibilities: • Load raw materials into machines following established procedures and safety guidelines, • Operate manual or CNC machines to run production jobs according to specifications, • Monitor machine performance and production quality during operation, making minor adjustments as needed, • Unload and handle finished parts with care, ensuring they meet basic quality standards, • Perform basic inspections of parts and report any issues or inconsistencies to supervisors or quality control, • Maintain accurate production records and communicate effectively with team members and supervisors, • Follow all safety protocols and contribute to a clean, organized work environment, • Support team productivity by assisting colleagues and sharing best practicesRequirements:, • Minimum 5 years of experience operating manual or CNC machines in a manufacturing or engineering setting, • Proven ability to follow detailed instructions and production schedules, • Strong attention to detail and commitment to producing quality parts, • Basic understanding of measurement tools (calipers, gauges, etc.) for simple inspections, • Ability to work independently and as part of a team, • Good communication skills and a collaborative attitude, • Physical ability to stand for long periods and lift up to 50 lbs.What We Offer:, • Competitive pay and benefits package, • Stable, full-time position with opportunities for growth, • Supportive and safety-focused team culture WET is an Equal Opportunity Employer; employment with WET is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Powered by JazzHR kpRJHu0uAW

PeopleReady - PR-1473801 [Production Operator / Machinist] As a Machine Operator at PeopleReady, you'll: Operate machines to produce goods efficiently; Monitor machine operations and adjust settings as needed; Inspect products for quality and ensure they meet specifications; Troubleshoot issues that

Shari's Cafe and Pies - 10521 Sunland Blvd No 7 [Dishwasher / Busser / Porter / Cleaning] As a Dish Machine Operator at Shari's, you will: Load, run and unload dish machine; Keep the dish machine clean and report any functional or mechanical problems; Wash and store all tableware and kitchenware; Ke

Job DescriptionA Folding Box Company needs an experienced Gluing Machine Operator for their City of Commerce Location in Southern California.

Job Description We are actively hiring for a Forlder Operator for our plant in Van Nuys, CA Shift : 2nd Shift - 1:30pm to 10:00pm Pay Range - $18 to $21 Position Summary: The Folding Operator is responsible for the set-up, adjustment and operation of the different types of folding machines (continuous and pile fed). The Folding Operator will follow the specification from the gang sheet to determine what kind of fold will need to be done . While running the folding machine, the Folder Operator will ensure that each folded job meets the gang sheet specifications in accordance with company policies and procedures. Essential Functions/Responsibilities: • Access IMS program to determine priority jobs and set workload for the day., • Place printed jobs on folding machine and set up to make bifold, trifold, according to job specifications., • Observe the folding machine while running to make any adjustments and ensure a smooth and accurate fold run., • Replace worn out rubber stoppers and adjust to ensure an accurate fold, using hand tools when required., • Record production and operational data using IMS system, such as entering completed jobs., • Report all workplace hazards to management immediately., • Ensure all equipment, tools, and workstations are in good working order and is free of any safety hazards., • Must be available for any required overtime based on business needs., • Good problem-solving skills, • Good organizational skills, • Attention to detail, • Good communication skills, • Ability to communicate effectively with Press Operator, • Ability to use hand/power tools and safe use of them, • Ability to multitask with changing priorities, • At least 1 year of experience using continuous and pile fed machines, • Able to lift up to 50 lbs (50% of time), • Able to stand for 8 hours

Job DescriptionLooking for Machine Operators for 1st shiftExperience in Mills and/or LathesPay rate 20.00-25.00

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS™) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Join a cutting-edge team at Divergent focused on revolutionizing the manufacturing process through advanced 3D metal printing technology. This role is integral to the development of high-performance machine control systems that drive our next-generation digital manufacturing platform. The Role • Design and implement real-time machine control software for our proprietary 3D metal printing systems., • Develop and maintain the graphical user interface (GUI) for operator interaction with 3D printers., • Build and optimize software simulations of 3D printer operations for design validation and performance analysis., • Create calibration algorithms and automated maintenance procedures to ensure high system reliability and print quality., • Collaborate closely with hardware, mechanical, and systems engineering teams to integrate software with complex mechatronic systems.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Proficiency in modern C++ (C++11 or later), including multithreaded application development, • Experience with version control systems (Git), • Familiarity with build systems and configuration tools (e.g., CMake)Preferred Qualifications, • Experience with GUI development using Qt, • Familiarity with computer vision libraries such as OpenCV, • Working knowledge of Python for scripting and automation, • Background in industrial control systems or control theory, • Understanding of Digital Signal Processing (DSP) and real-time systems, • Prior experience with hardware/software integration in an industrial or manufacturing environment, • Proficiency with MATLAB, Simulink, or Simscape for modeling and simulation, • Exposure to continuous integration tools and workflows, especially using GitHub CIWork Environment, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description At 4over, we are committed to building a diverse and inclusive workplace welcoming to people of all backgrounds. Providing our employees with job training and opportunities for growth, development, and advancement. We take pride in fostering a safe environment for all employees. We are currently seeking an experienced 2nd shift Smithe Envelope Operator for our growing Bindery Department. Summary: The Envelope Operator is responsible for the setup, adjustment, and safe operation of the envelope machine (i.e. - F.L. Smithe Champion Envelope Convertor) to produce quality finished products that meet customer and company specifications and quality standards. Schedule: 2nd shift, Monday-Friday, eight or more hours per day, five or more days per week based on business needs. Primary schedule will be 12:00 PM – 8:30 PM, Monday – Friday, or similar. This is an on-site position requiring the employee to be present physically. Salary Range: $19.00 To 22.00 Hourly Compensation commensurate with experience. At this time, we are not engaging with agencies or third-party recruiters. Thank you for your understanding. Essential Duties and Responsibilities include the following: • Access the batching system to view batch lists and identify priority jobs to be completed, • Review job tickets and plan work processes to meet customer specifications for custom jobs, • Ensure machines are ready and set specifications to run products as required, • Quality control of completed jobs, providing updates on job status and schedule to the supervisor, • Make adjustments as needed to maintain specifications and timely flow of materials, • Monitor assigned machine during run to ensure machines are maintaining the proper requirements, • Unload machine and stack materials on pallets, • Ensure jobs are meeting quality and quantity requirements, • Troubleshoot machine problems, resolve if possible, notifying Floor Supervisor, • Maintain proper machine maintenance and lubrication, • Remove waste items for recycling, • Complete and maintain all required paperwork, records, documents, etc., • Ensure all equipment, tools, and workstation are in good working order and is free of safety hazards Qualifications • Six-months to one-year related experience utilizing an envelope machine (i.e. - F.L. Smithe Champion Envelope Convertor), • High School Diploma or GED equivalency 4over Company History: 4over was founded in February of 2001. What started off as creating business cards and web page designs by a husband and wife, quickly flourished. Since the company was founded, we are now a private equity owned company growing and expanding across many states. Through our 4over Core Attributes, we are committed to meeting and exceeding customer expectations, cultivating and nurturing our relationships, providing excellence and caring for others. Health and Life Insurance- • Medical, Dental, Vision, Life/AD&D Insurance, Disability, and Flexible Spending Accounts (FSAs) for Health Care and Dependent Care, • 4over pays 100% of the employee’s premium for his/her Basic Life/AD&D Insurance in the amount of 1x the employee's annual salary, up to $500,000, • New employees are eligible to enroll the first of the month, following 1 month of employment, • Semi-annual open enrollment (January 1st and July 1st), • Discretionary employer match; typically, 50% of employee deferrals up to 6% of compensation, • 9 Paid Holidays, • Accumulating PTO to be used after 90-days of continuous and active full-time service

Job DescriptionWe are hiring full-time Drill Operators to join our growing team in the Drill Department. This is a hands-on manufacturing role where you'll operate drilling equipment, perform part inspections, and support production goals in a fast-paced environment. We're looking for candidates with strong technical aptitude who are eager to learn and grow within our company. Key Responsibilities: • Operate drilling machines to produce high-quality parts according to specifications, • Replace drills and maintain basic machine setup, • Follow detailed work instructions and safety procedures, • Inspect finished parts to ensure they meet quality standards, • Maintain clean, organized, and safe workspaces, • Communicate and escalate issues such as equipment malfunctions or non-conforming parts, • Collaborate with team members and supervisors to meet production targets Requirements: • Strong mechanical or technical aptitude, • Ability to follow written and verbal instructions precisely, • Detail-oriented with a commitment to quality and safety, • Able to stand for extended periods and lift up to 50 lbs, • Prior experience in a manufacturing or technical role is a plus

Job Description We are actively hiring for the position of HP Operator Trainee for our plant in Van Nuys, CA. Shift: 1st Shift Pay: $18.00 – $20.00 Essential Functions/Responsibilities: • Good problem-solving skills., • Ability to work with computers., • Attention to detail., • Ability to read, write, speak & understand English., • Ability to communicate effectively with Press Operator., • Ability to use hand/power tools and safe use of them., • Ability to multitask with changing priorities., • Access IMS program to determine priority jobs and set workload for the day., • Get the printed rolls from table to mount it on the roller that will feed it through the machine., • Set up correct rolling die to cut the shape on the job passing through and ensure cutters are at the correct length to cut the job., • Observe the HP indigo digital press while running to make any adjustments and ensure a smooth and accurate flow., • Record production and operational data using IMS system, such as entering completed jobs., • Report all workplace hazards to management immediately., • Ensure all equipment, tools, and workstations are in good working order and is free of any safety hazards., • Able to lift up to 50lbs (50% of time), • Able to stand for 8 hours What are the perks and benefits of working at Digital Room? • Collaborate with leading print professionals in a fast-paced, high-tech, safe, and enjoyable environment, • Competitive pay and growth opportunities., • Comprehensive health, dental, and vision coverage (location-specific)., • Employer match 401(k) up to limits., • Company-sponsored Life and AD&D Insurance., • Flexible Spending Account and voluntary benefits., • Paid holidays and PTO., • Employee discounts on all products., • Company-sponsored training and certifications.

Essential Duties & Responsibilities Loads media into various print machines and carries out the production of projects from print to finishing Assists with delivery or installation, as needed.

Partners Personnel - JobID: vernon-production-associate [Production Operator / Assembly Line Worker] As a Production Associate at Partners Personnel, you'll: Operate machinery and assemble products efficiently; Inspect finished goods for quality assurance; Maintain a clean and organized workspace; F

Essential Duties & Responsibilities Loads media into various print machines and carries out the production of projects from print to finishing Assists with delivery or installation, as needed.

Government Jobs - Full-Time - $5,406.Monthly Posted 2 weeks ago | Closes in 4 days | Share.

Experience with SMT Machines, rework.

Experience with SMT Machines, rework.

Americold - 3420 East Vernon Avenue [Warehouse Associate / Forklift Operator] As a Forklift Operator at Americold, you'll: Operate forklift to move and stack materials; Load and unload trucks; Maintain inventory accuracy; Follow safety procedures; Keep work area clean and organized; Assist with othe