Machine operator jobs in Houston, TexasCreate job alerts

Job Description Assemble flex duct in a manufacturing environment. Either using compressed cans or manually. Position Responsibilities May Include: • Ability to set up and load assembly tooling with raw material., • Ability to identify raw material by part number as identified on production schedule., • Ability to make necessary changes and adjustments to equipment when needed., • Completion of First Article process and filling out of quality documents., • Always maintain a clean work area., • If assembling on a manual (non-compressed) production line, the employee must be able to handle larger diameter products and complete the assembly process by hand. These products are typically heavier and harder to assemble., • Works within well-defined instructions., • Uses established procedures and works under supervision to perform assigned tasks., • Must have good basic math skills., • Must have legible handwriting., • Ability to read labels and numbers., • Ability to operate in high speed and fast-paced environment. Experience: Physical Requirements / Work Environment: • Must be able to perform essential responsibilities with or without reasonable accommodations., • Manufacturing environment with forklift traffic., • PPE required: steel toed safety shoes, safety glasses with side shields, and gloves., • Job requires standing (up to 90%), walking (up to 10%), stooping or bending, reaching, twisting and turning., • Lifting, carrying, and pushing up to 40 lbs. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

Job DescriptionDescription: 3rd Shift (11pm-7:30am) Position Purpose: To support plastic production through setting molds, loading resin, setting up work stations and helping to establish process parameters per master control plants as well as assisting others in the support of manufacturing. Job Responsibilities: • Removal of molds and lead changeover activities, • Assisting shift supervisor in supporting multiple machines through monitoring operators, • Handling and sorting of production parts, fixtures and components, • Basic monitoring of production process, • Maintaining and cleaning the machine and work area, • Providing breaks for operators Expectations: • On-time and dependable attendance, • To complete simple machine adjustments, • To have the ability to discern good and bad parts, • Ability to provide accurate part counts, • To be able to maintain multiple machines and support multiple operators in basic functions Requirements: Qualifications: Education: • Positive can do attitude, • Ability to speak and write English, • Ability to sit or stand for extended periods of time and climb ladders, • Proficient mathematics, • Good interpersonal skills both written and verbal, • Shows good judgement, • Ability to work independently and handle projects to completion, • Ability to lift 55lbs

Purpose of Position As a CNC Laser & Brake Press Operator, working on new product development, you will work individually or as part of a small team to program and machine parts for research and development projects and prototypes. You will be required to share knowledge with R&D Engineers, produce a variety of parts, all of which must meet the dimensional specifications of the mechanical engineering drawings. In addition, you will provide feedback on manufacturability of parts and offer suggestions that will lead to more robust and cost effective designs. An ideal candidate will be able to develop and execute the full machining process for complex parts from initial product design review through programming, tooling/ fixturing and process verification to delivering parts. Other responsibilities of this position include performing preventative maintenance on CNC Laser, CNC Brake Press, as well as other fabrication machinery, prototype assembly and drawing and design reviews. Also, the candidate will be required to maintain the cleanliness of work areas and participate in Powell's ongoing Safety Training. Key Responsibilities • Program, setup and operate CNC laser cutting machine to cut sheet metal and plate according to specification., • Operate CNC brake press machines to bend, form, and shape metal parts with precision., • Read and interpret engineering drawings, blueprints, and GD&T requirements., • Select proper tooling, dies, and fixtures for assigned jobs., • Inspect finished parts using calipers, micrometers, and other precision measuring tools to ensure quality and accuracy., • Perform routine machine maintenance and troubleshooting., • Maintain accurate records of production, including job travelers and inspection reports., • Work closely with engineers and machinists to support prototyping and R&D needs., • High school diploma or equivalent; technical certification or vocational training preferred., • 2+ years of experience operating CNC laser and/or brake press equipment., • Strong knowledge of sheet metal fabrication, tolerances, and material properties., • Ability to read and interpret technical drawings and blueprints., • Proficient in the use of precision measurement tools., • Strong problem-solving skills and mechanical aptitude., • Ability to work independently and collaboratively in a team environment. The employee typically performs duties in a normal office environment. There may be some work in a manufacturing environment and exposure to the elements of our factory. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities. It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs, and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. Physical Requirements The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Regularly required to use hands to touch, hold, handle, or feel., • Frequently required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear, • Must occasionally lift and/or move up to 65 pounds, • Maintaining body equilibrium and agility to prevent falling when walking, standing, crouching, ascending, or descending stairs #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Job Description WAREHOUSE ASSOCIATES NEEDED – MULTIPLE ROLES AVAILABLE Connect Staffing is looking for Warehouse Associate to join a dynamic team at a refrigerated warehouse in Houston, TX. Positions are available in three different work environments: Cooler (35°ree;F / 2°ree;C) for extended periods, Freezer (-5°ree;F / -20°ree;C) for extended periods, and Ambient, which is a standard warehouse environment. Schedule: Multiple shifts are available, starting between 4:30 am and 7 am, lasting up to 8 to 12 hours. Requirements for Warehouse Associate: • Pass a drug screen and background check., • Ability to safely lift up to 50 lbs., • Ability to stand, walk, bend, and perform repetitive movements for long periods., • Ability to work in a fast paced environment., • Steel-toe shoes required; other PPE provided on-site., • Basic computer skills, math ability, and English literacy., • Prior experience in roles such as Pickers, Packers, Organizer, Loader, Sorter, Receiver, Separate Loader, Repacker, Putaway, Restock, Bailer, Cycle Counter, Janitor Sanitation or machine operator is a big plus! Benefits for Warehouse Associate: • Frequent overtime opportunities., • Health and dental insurance., • Referral bonuses. Responsibilities for Warehouse Associate: • Picking & Packing: Select, verify, and pack orders using handheld devices., • Inbound/Receiving: Break down pallets, label, and put away inventory., • Loading/Sorting: Stage and load pallets by route, scan, and sort packages., • Repack/Breakdown: Open bulk cases, repackage, and organize product., • Inventory Control: Perform cycle counts and check product quality., • Sanitation: Clean warehouse areas, remove debris, and operate balers. All candidates meeting the minimum requirements will receive an SMS invite to an AI-based interview. This interview helps us understand your qualifications and experience, and candidates who complete it will receive first consideration. Please expect a text message from (302) 405-6282 within 30 minutes of submitting your application. See all our current openings and waitlists at jobs.connectstaffing.com!

Job Description Full Job Description – Packaging Operator LOCATION Missouri City, TX (Greater Houston Region) COMPANY BACKGROUND The 3D printing industry is one of the most exciting and fastest-growing industries in the world today and Polymaker is part of the momentum. Polymaker develops, produces and markets high value materials for 3D printing. Our company is growing rapidly and can be described as young, open and energetic. Polymaker has been active in the US since 2013. We have built up a network of channel partners who serve end-users from all over the United States. Our end-users are hobbyists, professionals and industrial customers who 3D print high quality parts using our filaments. From our 40,000 SF facility in Missouri City, TX, we currently manage the production, sales, marketing, planning, and distribution of 3D printing filament for the North America region. POSITION SUMMARY The Packaging Operator is responsible for labeling and packaging product. Main equipment consists of PCs, label vacuum sealers. POSITION TYPE Full time, Hourly The Packaging Operator reports directly to the Shift Lead. Key Responsibilities • Preparation of cardboard, paper, and plastic packing materials, • Packing and labeling of semi-finished products, • Operation of a vacuum sealing machine, • Palletizing packaged product, • Operator of a pallet jack or similar non-driven mobile equipment, • Document production rate against shift plan and complete work order information, • Document all equipment, material, and quality issues during shift, • Follow all process work instructions, • Follow all company environmental, health, and safety standards, • Stop work authority – STOPS all work if unsafe conditions are identified, • 12 Hour Shifts; from 3 – 4 shifts/week (alternating schedule), • Reliable transportation to and from the facility, • High attention to detail, • Walking, standing, bending, lifting, and reaching are normal expected movements during a shift, • Previous experience working in a manufacturing or refinery facility, • Willingness to learn and teach others, • Open to taking both direction and feedback from others Pay Range: $15/HR commensurate with experience. A $1/hour shift differential is added for night shifts Employees at Polymaker LLC receive competitive compensation package and benefits including 401(k) matching, medical, dental and vision insurance, and paid time off. Polymaker LLC (the US entity of Polymaker) is an Equal Opportunity Employer and do not discriminate on the basis of an individual’s sex, age, race, color, creed, national origin, alienage, religion, marital status, pregnancy, sexual orientation or affectional preference, genetic trait or predisposition, carrier status, citizenship, veteran or military status, and other personal characteristics protected by law. All applications will receive consideration for employment without regard to legally protected characteristics.

Job Description Job Title: Angle Roll Operator Department: Fabrication Employment Type: Full-Time Job Summary: The Angle Roll Operator is responsible for setting up, operating, and maintaining angle rolling machines to bend metal structural shapes such as angles, channels, tubes, and beams into required radii and configurations. The operator ensures that finished products meet specified tolerances, dimensions, and quality standards. Key Responsibilities: • Machine Operation:, • Operate angle roll machines (manual or CNC) to bend metal to specified shapes and dimensions., • Adjust machine settings such as pressure, roll position, and speed to accommodate different materials and bending requirements., • Perform pre-operation checks and ensure machine is running safely and efficiently., • Setup & Calibration:, • Read and interpret blueprints, work orders, and drawings to determine setup requirements., • Select appropriate tooling and dies for the material and job., • Measure and mark material to prepare for rolling process., • Quality Control:, • Inspect finished parts for conformance to specifications using measuring tools (e.g., calipers, protractors, tape measures)., • Make adjustments as needed to maintain quality and minimize waste., • Document production information and maintain accurate records., • Maintenance & Safety:, • Perform routine maintenance and cleaning on rolling equipment., • Identify mechanical issues and report to maintenance team., • Experience:, • 1–3 years of experience operating angle roll machines or similar fabrication equipment preferred., • Experience with structural steel and metal fabrication processes., • Skills:, • Ability to read blueprints and interpret technical drawings., • Strong math and measuring skills., • Familiarity with material properties (steel, aluminum, stainless, etc.)., • Mechanical aptitude and attention to detail., • Physical Requirements:, • Ability to lift and move heavy materials (50+ lbs.)., • Stand for extended periods; bend, reach, and kneel as needed., • Forklift certification., • Welding or other fabrication skills., • Experience with CNC angle roll machines., • Ironworker and saw experience are a plus. Company DescriptionAbout Tarsco Construction Corporation: Tarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients. Tarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.About Tarsco Construction Corporation:\r\n\r\nTarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients.\r\n\r\nTarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.

Job Description At WeldFit, the position of Extrusion/Press Operator is responsible for the manufacture of extrusions and round-up pressing for extrusions, maintain, maintenance and equipment for productivity and safety by performing the duties and responsibilities below. Other Duties / Expectations: • Safety, • Learn all safety precautions with regards to safe oppress operation including heating extrusions and rounding up various extruded products., • Work and think safety at all times., • Responds to verbal or written instructions for safety and security calls regarding machinery., • Records, • Records all inspections, tests and repairs on preventive maintenance stickers., • Records written recommendations on improvements to reduce setup time and run time., • Tools/Installation, • Must have basic hand tools., • Be proficient in measuring devices tape, level, and gauges., • Installs special functional and structural parts and equipment., • Inspects, • Inspects damage parts, determines nature of repair and uses repair tools to rework or refurbish worn or damaged parts., • Inspects, tests, and adjusts all systems, machinery and equipment on a regular basis., • Performs checks and balances on machines to assure the proper functioning., • Constructing, • Reassembles equipment and tests performance as needed, • Basic understanding of hydraulics and hydraulic systems, • Miscellaneous, • Performs other related duties as assigned, • Must be able to work overtime and weekends with minimum notice., • Ability to stand, walk, bend and climb, • Capability of lifting up to 50 lbs. on a regular basis, • High School Diploma or equivalent, • English Reading, Writing, and Verbal Skills, • Time Management Skills, • Basic Layout Skills, • Blueprint Reading Skills, • Mathematic AptitudeCompany DescriptionEstablished more than 50 years ago, WeldFit is a pipeline products and services company that helps oil and gas customers optimize their pipeline operations. With headquarters in Houston, Texas, we are strategically located to serve your needs anywhere in the world. We are ISO certified, meaning you can depend on the safety and reliability of our products and services.Established more than 50 years ago, WeldFit is a pipeline products and services company that helps oil and gas customers optimize their pipeline operations. With headquarters in Houston, Texas, we are strategically located to serve your needs anywhere in the world. We are ISO certified, meaning you can depend on the safety and reliability of our products and services.

Job Description Clayton Services is searching for a Production Operator to join a thriving company in Houston. The Production Operator will be responsible for operating machinery, maintaining production efficiency, and ensuring a safe and clean work environment. Job Type: Temp-to-Hire Pay Rate: $17/hour plus OT Benefits: Excellent benefits available after the successful completion of the temporary period, including medical, dental, vision, vacation, and more. Work Schedule: Must be able to work a 2-2-3 rotating schedule, including weekends (2 days on, 2 days off, 3 days on, 2 days off, 2 days on) Shifts: Day shift (6:00 am - 6:30 pm) and night shift (6:00 pm - 6:30 am) are available. Production Operator Responsibilities: • Safely operate machinery to achieve production goals while maintaining efficiency and adhering to quality standards., • Perform housekeeping duties, including sweeping, mopping, and removing debris, to maintain a clean and organized work area., • Follow standard operating procedures (SOPs) and company safety policies at all times., • Accurately track and record product counts throughout the production process., • Identify quality issues with raw materials and finished products., • Maintain appropriate machine speed to meet production targets., • Monitor and minimize scrap levels in accordance with production standards., • Support cross-training initiatives and assist in other departmental roles as needed., • Adhere to 5S principles (Sort, Set in Order, Shine, Standardize, Sustain) to ensure a safe and efficient workplace., • Demonstrate company values, including accountability, teamwork, customer focus, and continuous improvement., • Strong attention to detail and ability to work independently with minimal supervision., • Reliable attendance and punctuality., • Comfortable working in a fast-paced manufacturing environment with exposure to machinery, noise, and temperature changes., • Self-motivated, adaptable, and capable of handling changing production requirements., • Ability to use tools such as tape measures, calipers, banding equipment, hand tools, and utility knives., • High school diploma or equivalent required., • Previous manufacturing experience is preferred., • Physically able to stand, bend, and reach for extended periods and lift up to 50 pounds.

Job Description Job Summary: We are seeking a skilled and detail-oriented Press Brake Operator to join our manufacturing team. The ideal candidate will be responsible for setting up, operating, and maintaining press brake machines to bend, shape, or form metal components according to engineering drawings and specifications. Key Responsibilities: • Set up and operate press brake machines (manual and/or CNC) to produce parts per blueprints and work orders., • Select appropriate tooling, dies, and punches based on material type and thickness., • Perform quality checks using measuring tools such as calipers, protractors, and tape measures., • Adjust machine settings to ensure precision and accuracy of bends., • Monitor machine operations to detect malfunctions or defects., • Read and interpret technical drawings, work instructions, and job travelers., • Maintain a clean and organized work area, following safety and housekeeping standards., • Complete production documentation and record any deviations or issues., • Perform routine maintenance on machines and report any major mechanical issues. Requirements: • High school diploma or GED required; technical or vocational training preferred., • 5 years of experience operating a press brake (CNC experience is a plus)., • Ability to read and interpret blueprints and engineering drawings., • Strong math and measuring skills., • Familiarity with different types of metals and their bending characteristics., • Physical ability to lift up to 50 lbs and stand for extended periods., • Attention to detail and commitment to producing high-quality work., • Knowledge of workplace safety standards and PPE requirements., • Plate and Angle Roll experience is a plus Preferred Qualifications: • Experience with CNC press brake brands such as Pacific, Amada, Bystronic, Trumpf, or Cincinnati., • Forklift certification., • Lean manufacturing or Six Sigma knowledge. Work Environment: • Manufacturing floor environment., • May involve exposure to noise, heat, and sharp tools/materials., • Use of PPE such as safety glasses, gloves, and steel-toed boots required. Company DescriptionTarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients. Tarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.Tarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients.\r\n\r\nTarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.

Job Description Job Description Position Summary: Provide operational support and operate machinery specifically for manufacturing absorbent pads and other absorbent products. • Must have the ability to work as a team member, • Attention to detail is important, • Must know basic math and how to use a calculator, • Knowledge of processes and operation of manufacturing machines, • Must be able to read a tape measurer, • Read temperature, pressure, flow rate, and other gages related to the process manufacturing machine, • Log all gage readings with pen and paper, or through the computer, • Excel skills are a PLUS, • Any secondary education is a PLUS, • The ability to communicate clearly and effectively in English is required, Bi-Lingual in Spanish is a PLUS Schedule/Lunch/Breaks: • One hour for lunch, • Two 15-minute breaks, • Shifts are 12 hours / 4 days a week Days: Monday through Thursday Hours: 6:00 am to 7:00 pm Company DescriptionProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.ProSource Staffing is a professional staffing agency dedicated to connecting qualified candidates with companies in need of reliable talent. We specialize in providing temporary, temp-to-hire, and direct-hire staffing solutions across a variety of industries, including industrial, office, and skilled trades. Our team focuses on matching candidates’ skills and career goals with the right opportunities, while supporting both clients and employees throughout the hiring process. We pride ourselves on professionalism, personalized service, and building long-term relationships with the people and companies we serve.

Job DescriptionBuild your future with Volt! Volt is immediately hiring for a Laminator/Press Helper in Houston, Texas. As a Laminator/Press Helper, you will: • Strictly follows rules and guidelines and always uses the right procedure for the job., • Promptly reports incidents, near-misses, and unsafe conditions or processes., • SKNA employees, regardless of level, position or tenure are responsible for upholding the safety standards, regulations and policies., • Set-up rails, print, and die cut section accurately in accordance with proper setup techniques, • Inspect all dies before and after run to ensure that any necessary repairs are made before the next run, • Ensure all bolts for cutting dies are in place and tightly secured, • Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print Check anilox rolls for damage, • Maximize the utilization of equipment by operating the machinery at available capacity and speed, • Assist First Helper, Stacker, and Bundlers with job duties on the machine, • Cross-train on other machines, • Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data, Machine Operational Status, Safety Data, Quality Data, • Turn in maintenance work orders to supervision for needed repairs., • Be proactive in the maintenance of equipment Switch duties with First Helper as necessarySchedule - 2nd shift 1:15 P.M - 9:45 P.M. The Ideal Candidate will have: • Bilingual Preferred, • High school diploma or GED., • Responsible for assisting the operator in all activities associated with running the laminator including setup, operation, cleanup, and recommending improvements to operations., • The Laminator Helper works within a team to help the Operator run the Laminator in a safe, efficient and reliable manner., • 6 months' experience as a Press Department Helper, preferred, • 6 months' experience in the Press and Finishing Department, preferred, • Able to read and follow instructions on factory masters, • Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving one or more concrete variables in standardized situations., • The individual must have a working knowledge of the following:, • Equipment design and capabilities that can be translated into efficient operation. Payrate Range in Between - $13.00 - $15.00/hour • Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

Job Description Full Job Description – Extrusion Machine Operator LOCATION Missouri City, TX (Greater Houston Region) COMPANY BACKGROUND The 3D printing industry is one of the most exciting and fastest-growing industries in the world today and Polymaker is part of the momentum. Polymaker develops, produces and markets high value materials for 3D printing. Our company is growing rapidly and can be described as young, open and energetic. Polymaker has been active in the US since 2013. We have built up a network of channel partners who serve end-users from all over the United States. Our end-users are hobbyists, professionals and industrial customers who 3D print high quality parts using our filaments. From our 40,000 SF facility in Missouri City, TX, we currently manage the production, sales, marketing, planning, and distribution of 3D printing filament for the North America region. POSITION SUMMARY The Extrusion Machine Operator is responsible for operating all equipment on an extrusion line. Extrusion line equipment consists of pellet hopper, pellet feeder, extruder, extrusion bath, tensioner, winder, and spool take-off. POSITION TYPE Full Time, Hourly The Extrusion Machine Operator reports directly to the Shift Lead. Key Responsibilities • Operation of a single or twin-screw plastic extruder, including material preparation, equipment setup, winding, and cleaning, • Document production rate against shift plan and complete work order information, • Document all equipment, material, and quality issues during shift, • Follow all process work instructions, • Follow all company environmental, health, and safety standards, • Stop work authority – STOPS all work if unsafe conditions are identified, • 12 Hour Shifts; from 3 – 4 shifts/week (alternating schedule), • Reliable transportation to and from the facility, • Occasionally lift up to 50 lbs, • Walking, standing, bending, lifting, and reaching are normal expected movements during a shift, • Previous experience working in a manufacturing or refinery facility, • Willingness to learn and teach others, • Open to taking both direction and feedback from others, • Previous extrusion experience Pay Range: $16-18/HR commensurate with experience. A $1/hour shift differential is added for night shifts Employees at Polymaker LLC receive competitive compensation package and benefits including 401(k) matching, medical, dental and vision insurance, and paid time off. Polymaker LLC (the US entity of Polymaker) is an Equal Opportunity Employer and do not discriminate on the basis of an individual’s sex, age, race, color, creed, national origin, alienage, religion, marital status, pregnancy, sexual orientation or affectional preference, genetic trait or predisposition, carrier status, citizenship, veteran or military status, and other personal characteristics protected by law. All applications will receive consideration for employment without regard to legally protected characteristics.

Job Description Production Operator – Night Shift Job Title: Production Operator Shift: Night Shift Position Summary: We are seeking a motivated and reliable Production Operator to support daily operations in our steel coil processing facility. This role is critical to maintaining efficient production by assisting with equipment, setups, maintenance, and keeping work areas safe and organized. Key Responsibilities: • Assist in the operation of production and coil processing machinery, • Perform slitter head setups as directed by lead operators, • Support equipment maintenance and troubleshooting efforts as needed, • Maintain a clean and organized workspace by performing routine 5S activities, • Assist with coil handling and material flow during processing, • Move between production cells as necessary to support workload demands, • Follow all safety procedures, including proper PPE use and safe material handling, • Conduct basic quality checks and report any non-conformances to leadership, • Communicate effectively with operators, team leads, and maintenance personnel Qualifications: • High school diploma or GED preferred, • Prior experience in a steel or manufacturing environment is a plus, • Mechanical aptitude and willingness to learn machine setup and operation, • Ability to follow instructions and work both independently and with a team, • Comfortable working in a physically demanding, industrial setting Work Environment & Physical Requirements: • Exposure to heavy machinery, steel materials, noise, and temperature variations, • Frequent standing, walking, lifting, bending, and reaching, • Must be able to traverse the distribution warehouse and access a variety of storage spaces and shelving units by stretching, squatting, and reaching., • Must be able to lift up to 50 pounds at a time., • Must be able to work in a variety of weather conditions and temperatures in the warehouse and on the loading dock., • Use of PPE (steel-toe boots, gloves, eye protection, etc.) is required Why Join Us? Be part of a team that values your contributions and offers opportunities for growth in the steel processing industry. We provide training and support to help you succeed. Bayou Processing & Storage is an Equal Opportunity Employer. #ZR

Job Description Responsibilities: • Safely and effectively operate machinery to meet production goals while ensuring efficiency., • Willingness to train for and fill in other positions within the department and facility., • Maintain an accurate count of the products produced., • Adhere to the principles of 5S (Sort, Set in Order, Shine, Standardize, Sustain) to maintain a clean, safe, and efficient work environment., • Perform regular housekeeping duties to maintain a clean and debris-free work area, including sweeping, mopping, and waste removal., • Maintain an appropriate speed to achieve production goals., • Monitor and minimize scrap levels as defined by production standards., • Identify quality issues with raw materials., • Follow standard operating procedures (SOPs) and work instructions to ensure compliance with safety regulations and company policies., • Demonstrate core values, including integrity, accountability, value creation, customer focus, teamwork, continuous improvement, humility and respect, and drive., • Provide and maintain a safe work environment through proper training and communication. Requirements: • High school diploma or equivalent., • Previous experience in manufacturing is preferred., • Proficiency in basic math., • Ability to use tape measure, caliper, banding equipment, hand tools, and utility knives., • Physically able to stand, bend, and reach for 12-hour shifts; lift up to 50 pounds., • Comfortable working in a fast-paced manufacturing environment with exposure to noise, machinery, and temperature changes., • Must be able to pass a drug screening and background check., • Reliable attendance and punctuality., • Strong attention to detail and ability to work with minimal supervision., • Self-motivated and adaptable to changing work requirements., • Must be able to work one of the following fixed shifts on a 2-2-3 rotating schedule:, • Day Shift: 6:00 AM – 6:00 PM Our panels are trusted in projects ranging from luxury hotels and major construction developments to local sign shops across the country. At Alumanate, we pride ourselves on quality, reliability, and innovation — and we’re growing our team with individuals who share those same values. Learn more: Us\r\nAlumanate is a U.S.-based manufacturer of aluminum composite panels (ACPs) for the signage, architectural, and transportation industries. We are rapidly expanding, with a state-of-the-art facility in Houston, Texas, running 24 hours a day.\r\n\r\nOur panels are trusted in projects ranging from luxury hotels and major construction developments to local sign shops across the country. At Alumanate, we pride ourselves on quality, reliability, and innovation — and we’re growing our team with individuals who share those same values.\r\n\r\nLearn more:

Job Description Recodeal Energy Inc. is a growing manufacturing company committed to delivering high-quality energy solutions. We value safety, teamwork, and continuous improvement while maintaining a productive and supportive work environment. We are seeking reliable and motivated Machine Operators to join our manufacturing team. The Machine Operator is responsible for operating equipment, monitoring production processes, and ensuring products meet company quality and safety standards. Key Responsibilities * Operate, monitor, and maintain assigned production line equipment. * Follow standard operating procedures (SOPs) to ensure efficient production flow. * Perform quality checks to ensure products meet specifications. * Identify and report equipment malfunctions or safety hazards to supervisors. * Maintain a clean, organized, and safe work area. * Assist in line changeovers, setups, and adjustments as needed. * Collaborate with team members and supervisors to meet production goals. * Adhere to all company policies, safety standards, and OSHA requirements. Qualifications * High school diploma or equivalent (GED) required. * 1-3 years of previous manufacturing or production experience is required. * Ability to stand, bend, and lift up to 50 lbs for extended periods. * Strong attention to detail and ability to follow instructions. * Basic mechanical aptitude and troubleshooting skills are a plus. * Ability to work long hours, weekends, and overtime as needed. What We Offer * Competitive pay with overtime opportunities. * Health, dental, and vision benefits. * Paid time off and company holidays. * Opportunities for advancement and cross-training. * A safe and team-oriented work environment. Company DescriptionRecodeal Energy Inc. is a trusted manufacturing company based in Houston, Texas, specializing in providing high-quality energy solutions to our customers. We are dedicated to safety, innovation, and continuous improvement, and we believe our employees are the key to our success. At Recodeal Energy, we foster a supportive team environment, offer opportunities for growth, and provide competitive pay and benefits.Recodeal Energy Inc. is a trusted manufacturing company based in Houston, Texas, specializing in providing high-quality energy solutions to our customers. We are dedicated to safety, innovation, and continuous improvement, and we believe our employees are the key to our success. At Recodeal Energy, we foster a supportive team environment, offer opportunities for growth, and provide competitive pay and benefits.

Job Description DOVER PRECISION COMPONENTS: Dover Precision Components DPC (the Company) is part of Dover Corporations (the Parent Company) Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover PrecisionComponents delivers products and services that enhance performance, improve safety, reduce carbon emissions,and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC Summary: This position sets up and operates machine tools such as compression molding presses, blenders, ovens, and routing machines. Responsibilities: • Follows job order for product specifications such as dimensions and tolerances, tooling instructions, fixtures, and equipment settings., • Selects, positions, and secures tool in tool holder, • Moves controls to position press and work piece in relation to each other, and to set specified feeds, speeds, and pressures., • Observes operation of machine and verifies conformance of work piece to specifications Minimum required qualifications: • High school diploma or equivalent required., • Must be able to measure parts using micrometers, calipers or other measuring tools The ideal candidate possesses the following experience, skills, and abilities: • Clear communication, both oral and written, • Organization skills; keep area clean to 5S standards, • Prior shop or mechanical experience desired, • Must work according to safety policies and procedures, • Basic computer skills Mental/Visual/Physical Effort: • Walks, stands, reaches, and bends frequently., • Periodic lifting of moderate to heavy items may be required., • Possesses good hand/eye coordination. Physical Hazards: • Normal operations require eye protection, steal toed shoes, and ear protection., • Hot works requires aprons, heat resistant gloves, sleeves, and aprons., • Chemical process requires face shield and mask., • Additional safety equipment may be required. Material Hazards: • Illness or injury from materials present in normal working environment is unlikely. Working Conditions: • Exposure to normal machine shop environment with periodic noise., • Limited disagreeable factors present. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the positionsresponsibilities,a candidates work experience, a candidates education/training, the positions location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Our total rewards package for eligible team members also includes: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 11paid holidays per calendar year, paid vacation days, paid sick leave; tuition assistance;wellness reimbursement ;business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. #ZR-KZ #LI-KZI

Job Description The Plate Roll Operator is responsible for operating equipment that shapes and forms curves into metal plates or rolls the plate into cylinders while being supported by overhead cranes. Essential Duties and Responsibilities: • Operating and maintaining plate rolling machines, • Operating overhead cranes and rigging, • Interpreting blueprints and specifications, • Monitoring machine cycles and product quality, • Troubleshooting issues and adjusting the machines to correct any defects, • High school diploma or GED, • 5 years' experience operating a plate roll, • Strong mechanical aptitude and attention to detail, • Forklift or crane certification preferred or ability to obtain Tarsco professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations. Share in our Core Values Our core values are the cornerstone on which we build our business, a belief that doesn’t change. They are the driving force behind our mission. These core values define our company’s culture and provide guidance for all of our daily business decisions. The values that we believe make our company great are: • Safety is always our highest priority., • Employees are our greatest strength., • Committed to customer satisfaction., • Act with integrity., • Strive for excellence., • Deliver positive results., • Perform with a sense of urgency., • Be socially and environmentally responsible., • Lead by example., • Train for improvement., • Innovate for better solutions., • Never give up. Company DescriptionTarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients. Tarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.Tarsco has served industrial clients for over 40 years providing EPC turnkey solutions for above ground storage tanks and terminals. Tarsco specializes in engineering, construction, repair, maintenance services and are experts in API standards including 650, 620, and 653 as well as NFPA, AWWA, ASME Section VIII, and National Board Stamp “R” repairs. With global operations, Tarsco is well positioned to deliver unsurpassed service to our domestic and international clients.\r\n\r\nTarsco's professional management team offers a single source of contact to ensure their project is successful by being on schedule and on budget. Stringent Health, Safety, and Environmental policies are a major factor in the success of our projects. Tarsco's goal is to achieve zero incidents with no time away from the project, and this is accomplished by adhering to HS&E policies, in-depth training, and holding everyone accountable for safety. The result is a safer workplace for all as we strive to exceed our clients' expectations.

Job Description Job Summary: Program and operate waterjet cutting machine to cut materials to various design specifications. Supervisory Responsibilities: • Operator operates the waterjet cutting equipment to cut parts according to specifications and blueprints., • Accesses and uploads programming files., • Adjust machine settings using CNC controls to achieve desired results., • Loads and unloads materials using a forklift or overhead cranes., • Monitor cutting operations to ensure accuracy and quality., • Maintain and clean the waterjet cutting equipment to ensure optimal performance., • Inspect finished parts for quality and accuracy using measuring tools (calipers, scale, tape, square, etc.)., • Detect equipment malfunctions or out of tolerance machining and adjust machine, within capabilities, controls or control media as required to ensure quality of productions., • Troubleshoot and resolve minor machine issues. Report all machine malfunctions to Management and/or Maintenance., • Work according to supervisor’s direction to priorities and complete orders in a timely manner. To perform the job successfully, an individual should demonstrate the following competencies • Teamwork – Balances team and individual responsibilities; Contributes to building a positive team spirit, • Technical Skills – Strives to continuously build knowledge and skills; Shares expertise with others, • Written Communication – Able to read and interpret written information, • Planning/Organizing – Uses time efficiently, • Quality – Demonstrates accuracy and thoroughness; Monitors own work to ensure quality, • Safety and Security – Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and material properly., • Adaptability – Adapts to changes in the work environment, • Attendance/Punctuality – Is consistently at work and on time, • Dependability – Follows instructions, responds to management direction, • Diversity - Demonstrates knowledge of EEO policy; Shows respect and sensitivity for cultural differences; Promotes a harassment- free environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The following requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • High school diploma or equivalent., • One to three years’ experience, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Day Experience level: • 8-10 hour shift, • Day shiftCompany DescriptionTexas based company full of great people and opportunities.Texas based company full of great people and opportunities.

Job Description North Shore Steel is an industry-leading metals service center in the Houston area with a 65-year history of serving customers at the highest level. Our mission is to create significant value for our customers, provide a prosperous workplace for our employees, and positively impact society. North Shore Steel is seeking an experienced professionals to join our team. GENERAL DESCRIPTION: This position reports directly to the Production Supervisor. The scope of work is to operate a portable track torch cutting machine with (1) oxy-fuel torch to produce parts in the manufacturing warehouses. PRIMARY DUTIES: • Set up track and portable cutting machine for production runs., • Able to lay out plate to perform bevel cutting., • Make sure the machine has the necessary consumables., • Monitor machinery for any problems during the production run. If there is an issue, operators may adjust the program to correct the problem., • After items have been produced, operator ensure that they meet specifications and verify their quality., • Instructs material handler on what material to load and/or unload and how to load table to maximize productivity., • Checks material for grade, thickness, and size per the production documentation., • Reads prints, determines tolerances, and checks parts against prints to ensure quality of parts being cut. Based on the appearance and quality of parts being produced, makes appropriate adjustments to the processes, such as travel speed, tip size, tip replacement, gas pressures, kerf compensation, torch height, and other factors as needed to produce the desired quality., • Performs daily, weekly, and monthly operator preventive maintenance., • Communicates problems with the machine or any other equipment to lead man, supervisor, and/or maintenance to ensure problem resolution., • Uses and understands measuring instruments - tape measure, level, protractor, and micrometer., • Responsible for safety and environmental issues regarding assigned area. Material handling of material, crane use, cutting torch, hot parts, lifting weight limits, proper eye protection., • To work overtime as requested., • Must be an experienced Beveler with a minimum of 5 years of experience, • Must be able to read blueprints and engineering drawings., • Must be proficient at operating a Messer or Kinetic burning machine., • Must understand computer controls and logic to adjust cutting speeds/pressure gauges., • Must have knowledge of basic shop mathematics, addition, subtraction, fractions, and decimals, • Ability to lift, carry, or maneuver objects, difficult objects will be lifted with the assistance of mechanical means or additional manpower., • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb #ZR BENEFITS:North Shore provides rich benefits to its full-time employees and their families, including, but not limited to, multiple Major Medical plans, Dental, Vision, Vol Life, Short Term Disability, and a Flex Spending Account. We also provide a Basic Life policy and Long Term Disability at no cost to you. The benefits don’t stop there, with the added value of a generous holiday schedule, PTO policy, and a 401k plan.

Job Description Company location – NW side of Houston 77040 Pay - $13 Monday - Friday (Must be open to work weekends as needed) We are seeking a Machine Operator to join our team! You will help oversee operational activities and ensure excellent quality control. Responsibilities: • Oversee and coordinate plant operations and activities, • Troubleshoot and resolve issues in a timely fashion, • Load and unload equipment and materials, • Provide innovative solutions to improve plant efficiency, • Conduct routine preventive maintenance on the plant, • Previous experience in plant operations or other related fields, • Familiarity with plant tools and equipment, • Strong troubleshooting and critical thinking skills, • Ability to handle physical workload, • Ability to thrive in a fast-paced environment Company DescriptionGreat work environmentGreat work environment

Job Description Spike Electric Controls is a leading manufacturer specializing in producing high-quality precision components and assemblies for various industries. We are dedicated to offering innovative solutions and delivering excellent products to our clients. We are currently seeking a skilled and experienced 3rd Shift Hydraulic Press Brake Operator to join our dynamic team. The ideal candidate will be a detail-oriented and safety-conscious individual with a strong work ethic and dedication to quality. Job Summary: As a 3rd Shift Hydraulic Press Brake Operator, you will be responsible for setting up, operating, and maintaining hydraulic press brake machines to produce high-quality parts while adhering to all safety protocols and production schedules. You will work closely with the production team to ensure the timely completion of orders and contribute to the overall efficiency of the manufacturing process. Responsibilities: • Operate hydraulic press brake machines, following established procedures and safety protocols, • Set up machines according to job specifications, including selecting appropriate dies, tooling, and material, • Read and interpret blueprints, schematics, and work orders to ensure accurate and efficient production, • Perform quality inspections of finished products to verify conformance to specifications and maintain high-quality standards, • Maintain accurate records of production, machine settings, and maintenance activities, • Troubleshoot and resolve machine issues and perform routine preventative maintenance, • Collaborate with other team members to ensure smooth production flow and timely order completion, • Follow all safety guidelines and report any safety concerns or incidents to the supervisor, • Maintain a clean and organized work area, contributing to a safe and efficient work environment, • High school diploma or GED equivalent, • Minimum of 2 years of experience operating hydraulic press brake machines, • Ability to read and interpret blueprints, schematics, and work orders, • Strong knowledge of press brake operations, tooling, and materials, • Excellent attention to detail and commitment to producing high-quality work, • Ability to use measuring instruments, such as calipers, micrometers, and gauges, • Strong problem-solving skills and ability to troubleshoot machine issues, • Excellent communication and teamwork skills, • Ability to stand for extended periods and lift up to 50 lbs, • Commitment to following all safety guidelines and maintaining a clean and organized work area, • Experience with CNC press brake machines

Job Description We are seeking a detail-oriented and technically skilled Production Technician to operate and maintain our laser robotic drilling equipment. This role is critical to ensuring precision drilling operations are executed safely, efficiently, and according to specifications. The ideal candidate will have experience with automated manufacturing equipment and strong mechanical and electrical aptitude. Key Responsibilities: • Operate laser robotic drilling systems to perform precise drilling operations on steel pipes., • Operate and monitor machinery through HMI panels to adjust settings, track performance, and respond to alarms., • Monitor machine performance, troubleshoot issues, and perform minor mechanical adjustments as needed, • New part number changing over and setting up., • Perform quality checks using inspection tools (calipers, gauges, measuring tape, and microscopes) to ensure parts meet specifications., • Read and interpret blueprints, technical drawings, and production work orders., • Maintain a clean, safe, and organized work area in compliance with company safety policies., • Perform routine preventative maintenance on equipment and report malfunctions to maintenance or engineering., • Record production data and complete all required documentation accurately and on time., • Collaborate with team members, engineers, and supervisors to continuously improve processes and machine performance., • Follow all standard operating procedures (SOPs), safety protocols, and company policies., • Create "Lesson Learned" cards or documentation whenever a problem is solved to capture corrective actions and help reduce future downtime., • Manage spare parts inventory and usage, ensuring critical components are available to prevent production line stoppages due to part shortage, • High school diploma or GED is required, and technical or vocational training in manufacturing a plus., • 1–3 years of experience in a production, CNC, or robotic equipment operation role preferred., • Familiarity with automated manufacturing systems or laser drilling machinery is strongly preferred., • Ability to read and understand mechanical drawings and specifications., • Basic understanding of machine programming is a plus., • Strong attention to detail and commitment to producing high-quality work., • Comfortable working in a fast-paced, hands-on manufacturing environment., • Mechanically inclined with strong problem-solving skills, • Human Machine Interface experience is mandatory, • Dependable, punctual, and safety-conscious, • Excellent communication and teamwork abilities, • Willingness to learn and adapt to new technology and processes Company DescriptionRecodeal Energy Inc. is a trusted manufacturing company based in Houston, Texas, specializing in providing high-quality energy solutions to our customers. We are dedicated to safety, innovation, and continuous improvement, and we believe our employees are the key to our success. At Recodeal Energy, we foster a supportive team environment, offer opportunities for growth, and provide competitive pay and benefits.Recodeal Energy Inc. is a trusted manufacturing company based in Houston, Texas, specializing in providing high-quality energy solutions to our customers. We are dedicated to safety, innovation, and continuous improvement, and we believe our employees are the key to our success. At Recodeal Energy, we foster a supportive team environment, offer opportunities for growth, and provide competitive pay and benefits.

Job Description Overnight Press Machine Operator / Laser Cutter Technician Company Introduction: Ref Experts and HVAC LLC is a family-owned business dedicated to revolutionizing the commercial refrigeration and HVAC industry. With a focus on transparency, innovation, and trust, we strive to exceed our customers' expectations by building long-term partnerships rooted n integrity and excellence. Position Summary The Overnight Press Machine Operator / Laser Cutter Technician is responsible for setting up, operating, and maintaining sheet metal press machines and laser cutting equipment. This role requires strong technical skills, attention to detail, and the ability to work independently during overnight shifts. The ideal candidate will contribute to a small, collaborative team focused on quality, safety, and efficiency. Key Responsibilities • Operate and maintain sheet metal press machines and laser cutting equipment., • Read and interpret blueprints, technical drawings, and work orders., • Measure, cut, bend, and shape sheet metal parts according to specifications., • Inspect finished products for accuracy and quality., • Perform routine machine maintenance and troubleshooting., • Assist with additional fabrication tasks as needed in a small-team environment., • Follow company safety policies and OSHA guidelines at all times., • Communicate effectively with day-shift team members to ensure workflow continuity Qualifications • Minimum 2–3 years of experience operating sheet metal press machines., • Experience with laser cutting equipment (set-up, operation, troubleshooting)., • Ability to read and interpret technical drawings., • Strong mechanical and problem-solving skills., • Ability to work independently with minimal supervision., • Willingness to perform various tasks in a small company setting Preferred: • Knowledge of additional sheet metal fabrication processes (welding, assembly, etc.)., • Forklift certification or ability to obtain., • Bilingual (English/Spanish) is a plus. Work Environment & Physical Requirements • Overnight shift schedule: 7:00 PM – 5:00 AM., • Manufacturing shop environment with exposure to noise, heat, and machinery., • Must be able to stand, bend, and lift up to 50 lbs. throughout the shift., • Proper personal protective equipment (PPE) must be worn at all times. Compensation & Benefits • Competitive hourly pay [insert range]., • Shift differential for overnight hours (if applicable)., • Benefits: health, dental, vision, PTO, holiday pay,401K., • Opportunities for growth and development within a supportive, skilled team. Company DescriptionRef Experts and HVAC LLC is a family-owned business dedicated to revolutionizing the commercial refrigeration and HVAC industry. With a focus on transparency, innovation, and trust, we strive to exceed our customers' expectations by building long-term partnerships rooted in integrity and excellence. Join our team and be part of a company committed to shared growth and achievements.Ref Experts and HVAC LLC is a family-owned business dedicated to revolutionizing the commercial refrigeration and HVAC industry. With a focus on transparency, innovation, and trust, we strive to exceed our customers' expectations by building long-term partnerships rooted in integrity and excellence. Join our team and be part of a company committed to shared growth and achievements.

Job Description Hone Operator – Houston, TX 77003 Employer: Confidential Industrial Manufacturer (Felony-Friendly Employer*) Job Purpose: Prep Hone and Finish Hone for ID Projects Location Houston, TX 77003 Felony-Friendly Employer Policy We are an equal opportunity employer committed to second chances. Applicants with felony convictions are welcome to apply — however, no theft or violence-related offenses will be accepted. Key Responsibilities & Accountabilities * Operate a company-provided digital hone machine with precision and safety. * Utilize hand tools and precision instruments to hone parts according to work order traveler specifications. * Read and interpret micrometers, blueprints, and detailed drawings. * Complete all written documentation, entries, and required signatures. * Report any part or process deviations to the supervisor or quality inspector immediately. * Perform basic liquid penetrant inspections as required by work order travelers. * Safely operate jib and overhead cranes for material handling. * Conduct daily routine maintenance — check lubricant levels, clean machines, and maintain readiness. * Maintain a clean, organized, and efficient workstation. * Participate in company-provided training and demonstrate steady progress toward independent operation. Qualifications * Must be able to read and understand English for documentation and drawings. * Experienced Operators: Minimum one (1) year honing or related machining experience required. * Trainee Operators: Must have a high school diploma or GED equivalent. * Trainees will receive a minimum of four (4) weeks of hands-on instruction under supervision. * Readiness for independent operation is determined by the instructor. * Must possess or be willing to obtain required hand tools. * The company offers a tool purchase program with payroll deductions until paid in full. Compensation & Pay Scale Hourly pay is based on skill level and classification as outlined below: Skill LevelHourly Rate EXPERT$37.00 SPEC+$35.00 SPECIALIST$33.00 TECH+$31.00 TECH$29.50 A+$27.50 A$26.00 B+$24.00 B$22.50 C+$21.25 C$20.00 Pay rate determined based on skills, experience, and performance review. Training & Evaluation * Training evaluation method: direct observation (minimum four weeks). * Continuous performance reviews to ensure quality and adherence to standards. *Note: This employer values rehabilitation and opportunity. Candidates with non-violent, non-theft felony convictions are encouraged to apply. Company DescriptionMission Staffing of Texas is a leading veteran-owned and operated staffing agency that provides top-quality talent to organizations of all sizes across various industries. Our experienced team provides our clients with the best possible solutions to meet their staffing needs.Mission Staffing of Texas is a leading veteran-owned and operated staffing agency that provides top-quality talent to organizations of all sizes across various industries. Our experienced team provides our clients with the best possible solutions to meet their staffing needs.

Job Description The Finish Department Operator will work in a shop environment with outdoor environments as required, where weather and conditions may range from heat, cold, dirt, dust, noise, etc. QUALIFICATIONS * Manufacturing experience is a must * One (1) year of manufacturing experience or equivalent work experience * Bilingual a plus * High school diploma or equivalent qualification required * Basic mathematics * Strong attention to detail RESPONSIBILITIES * Controlling and adjusting machine settings (e.g., speed) * Feeding raw material or parts to semi-automated machines * Uses a forklift to move material in the shipping yard (when required) * Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, marked, or engraved onto workpieces * Participates in continuous improvement and LEAN manufacturing principles * Participates in on-the-job training to enhance skills related to job function, quality, safety, LEAN manufacturing, and other topics, as necessary * Stack and organize large bulk items * Performs daily inspections on vehicles and informs manager of any needed repairs * Completes all necessary paperwork on completed tasks * Wears appropriate safety equipment for work being performed and as directed by company policy * Maintains a safe work environment and housekeeping rules * All other duties and assignments as instructed * Setting up machines to start a production cycle PHYSICAL REQUIREMENTS * Regularly required to use hands to finger, handle or feel, reach with hands and arms, and talk or hear * Regularly lift and/or move objects up to 30 lbs. * Frequently required to stand, walk, stoop, kneel, crouch, or crawl * Occasionally required to sit and climb or balance * Specific vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust and focus

Job Description 1st Shift: 7am-3pm Monday through Friday $17/hour 2nd Shift: 3pm-11pm Monday through Friday $17.50 One year contract job; Weekly pay Receive pallets of boxes and perform book bound trimming services Ability to adjust trimming/ cutting settings on machine Prepare documents for scanning Keeping work area clean and free of safety hazards Monitor and inspect work for quality, accuracy and safe handling.

Job Description Clayton Services is searching for a Grinding Operator to join a fast-growing company in Southwest Houston. This hands-on role involves grinding cast components, handling materials, and supporting overall warehouse efficiency and cleanliness. The ideal candidate is reliable, hardworking, and has experience with industrial tools and equipment. Job Type: Temp-to-Hire Pay Rate: $17.00-$19.00/hour plus OT Schedule: Monday-Saturday, 5:00 am to 3:00 pm or Monday-Saturday, 4:00 pm to 2:00 am Benefits: Medical, dental, vision, 401(k), PTO, and more. Grinding Operator Key Responsibilities: • Perform grinding on metal castings and fittings using appropriate tools and safety equipment, • Maintain a clean, organized, and hazard-free workspace, including the grinding booths, warehouse, and yard areas, • Regularly lift and transport materials up to 50 lbs, • Package products according to specified guidelines, • Operate hand tools, grinding equipment, and pneumatic air tools safely and efficiently, • Follow all personal protective equipment (PPE) protocols, including the use of respirators, goggles, gloves, and hearing protection as required, • Report equipment issues, incidents, or safety concerns to supervisors, • Sweep, scrub, and maintain cleanliness throughout assigned work areas Education & Experience: Required: • High school diploma or GED, • Strong situational awareness and attention to detail, • Good communication and teamwork skills, • Ability to follow written and verbal instructions, • Familiarity with Lean Manufacturing or 6S practices, • Must regularly lift and move up to 50 pounds, • Ability to stand, walk, reach, crouch, and bend for extended periods during a 10-hour shift, • Frequent use of hands and wrists for tool operation, • Must be able to climb on and off industrial equipment such as forklifts repeatedly, • Must be able to work in various indoor and outdoor climate conditions, • Occasional overtime and weekend availability required, including some mandatory Saturdays based on operational demands

Job Description 3D Printing Robotics Operator Location: Houston, Texas Job Details • Type: Full-time, Onsite, • Compensation: $60-75k + Equity Incentives, • Benefits: 2 Weeks PTO + Vehicle Allowance Qualifications • Experience with machine operation is preferred, • Knowledge of 3D printing processes or particular interest, • Background in construction and quality control preferred, • Understanding of robotic systems, automation tools, and robot safety preferred, • Familiarity with concrete mixing and production standards (bonus) Job Summary We are seeking 3D Printing Robotics Operators to support and manage 3D printing construction activities on job sites. This role involves operating large-scale construction 3D printers, overseeing material systems, and utilizing basic software to ensure smooth operations. Operators will play a key role in delivering 3D-printed construction projects, ensuring high-quality output, adherence to timelines, and seamless collaboration with supply chain and construction teams. This includes coordinating project schedules, managing costs, handling information flow, and ensuring compliance with quality and safety standards. The position is based in Houston and will require work both onsite at active construction projects and at a warehouse production facility. The role reports to the Head of Operations and works closely with cross-functional teams to achieve project goals. Responsibilities • Operate and maintain construction 3D printing equipment and supporting material systems, • Manage project schedules, timelines, and delivery coordination, • Ensure quality standards in production and construction output, • Collaborate with cross-functional teams to achieve project milestones, • Support supply chain and construction workflows to maintain smooth operations, • Follow safety procedures and PPE guidelines during operations

Job Description HAAS Mill position (Day shift) Pay is $30-$35/Hour Position Overview: We are seeking a seasoned CNC Mill Programmer & Operator to run our HAAS VFS-2 3-axis vertical mill . This person will be responsible for programming, setting up, and operating the mill to produce both prototypes and production parts from engineering drawings. In addition to running the mill, this person will program other CNC equipment (such as laser tables and plasma tables) as needed — though they will not operate those machines day-to-day. They will collaborate closely with engineering/drafting to provide design-for-manufacturability feedback. Key Responsibilities • Program, set up, and operate the HAAS VFS-2 CNC mill using G-code and Fusion 360 CAM software., • Program additional shop equipment (laser tables, plasma tables) for production, when needed., • Design and set up simple fixtures and work holding solutions., • Select proper tooling, speeds, and feeds for quality and efficiency., • Produce both prototypes and production runs per engineering drawings., • Inspect finished parts for accuracy and quality using precision measuring tools., • Provide design-for-manufacturability feedback to engineering/drafting., • Perform routine machine maintenance and troubleshoot issues., • Maintain a clean, organized, and safe work area. Qualifications Required: • 3+ years of experience programming and operating CNC mills (HAAS strongly preferred)., • Proficiency with Fusion 360 or similar CAM software., • Ability to independently take apart from print to finished product., • Strong G-code programming skills and knowledge of tooling/fixtures., • Ability to read and interpret engineering drawings, including GD&T., • Experience programming for additional CNC equipment (laser, plasma)., • Basic fixture design experience., • Certifications (NIMS, trade school diploma) are a plus but not required.Company DescriptionCalTek is a manufacturing, technical, engineering and IT consulting firm that has expanded its business operations from its headquarters in San Diego, throughout all of California and into Arizona, Colorado, Florida, Georgia, Texas and Washington. CalTek has staffed positions with global companies such as Siemens, Parsons, and Illumina but also works with startups with 10+ employees.CalTek is a manufacturing, technical, engineering and IT consulting firm that has expanded its business operations from its headquarters in San Diego, throughout all of California and into Arizona, Colorado, Florida, Georgia, Texas and Washington. CalTek has staffed positions with global companies such as Siemens, Parsons, and Illumina but also works with startups with 10+ employees.

Job DescriptionBenefits: • Accident Insurance, • Hospital Indemnity Insurance, • Critical Illness Insurance, • Short Term Disability Insurance, • Long Term Disability Insurance, • Company Paid Life Insurance, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance Heavy Equipment Operator Make an Impact at C&D Scrap Metal Ready to take the wheel in a fast-paced, hands-on role where your skills and grit truly matter? Join a crew that keeps Houstons metal moving and brings pride to the recycling industry. At C&D Scrap Metal, we dont just run machines we run a tight, high-performing operation that values expertise, safety, and professionalism. If you're the kind of operator who knows how to get things DONE, this is your next move. What Youll Do Be the driving force behind our daily yard operations: • Own the yard flow under Supervisor direction youre the one who keeps things running on time and on target., • Load and unload materials with precision and confidence using loaders, excavators, crane material handlers, and forklifts., • Support the metal processing crew sort, prep, and help us move materials to the finish line., • Put safety first inspect equipment, gear up with PPE, and report anything that looks off., • Keep your machinery humming perform basic maintenance and alert us to any issues fast., • Be a standout with customers make every drop-off feel smooth, welcoming, and professional., • Full-time role Youre not just an equipment operator youre a problem-solver, team player, and safety champion. • At least 2 years operating heavy equipment (loaders, excavators, crane material handlers), • Minimum 1 year in industrial or scrap yard environments, • Strong stamina, hand-eye coordination, and attention to detail, • Able to thrive independently and work without being micromanaged, • Committed to doing the job safely, smartly, and professionally, • Willing to work outdoors, no matter the weather

Job DescriptionAbout CogniteEmbark on a transformative journey with Cognite, a global SaaS forerunner in leveraging AI and data to unravel complex business challenges through our cutting-edge offerings including Cognite Atlas AI, an industrial agent workbench, and the Cognite Data Fusion (CDF) platform. We were awarded the 2022 Technology Innovation Leader for Global Digital Industrial Platforms & Cognite was recognized as 2024 Microsoft Energy and Resources Partner of the Year. In the realm of industrial digital transformation, we stand at the forefront, reshaping the future of Oil & Gas, Chemicals, Pharma and other Manufacturing and Energy sectors. Join us in this venture where AI and data meet ingenuity, and together, we forge the path to a smarter, more connected industrial future. Learn more about Cognite hereCognite Product Tour 2025Cognite Product Tour 2024Cognite Product Tour 2023Data Contextualization Masterclass 2023 Our valuesImpact: Cogniters strive to make an impact in all that they do. We are result-oriented, always asking ourselves.Ownership: Cogniters embrace a culture of ownership. We go beyond our comfort zones to contribute to the greater good, fostering inclusivity and sharing responsibilities for challenges and success. Relentless: Cogniters are relentless in their pursuit of innovation. We are determined and deliverable (never ruthless or reckless), facing challenges head-on and viewing setbacks as opportunities for growth. As a Senior Account Executive you will win new business with top Manufacturing accounts. You will help customers achieve improved business results through their adoption of Cognite Data Fusion to accelerate their digital transformations.What You'll Do • Develop and execute a territory strategy to drive bookings growth and win new customers, • Through active prospecting and your personal network of contacts, generate new pipeline and provide “commercial insights” to prospective clients on how Cognite’s solutions will address the most important areas of their value chain, • Manage complex sales cycles and lead your extended territory team (pre-sales and other key functions) to delight your prospects and customers, • Utilize value-selling processes alongside demonstrating a wealth of knowledge of Cognite’s solutions, • Negotiate favorable pricing and business terms with large enterprises by selling value and ROI, • Achieve bookings targets while developing satisfied and reference-able customers, • Accurately forecast monthly and quarterly results, • Update salesforce.com on a regular basis, • Provide timely and insightful input back to other corporate functions, particularly product management and marketing, • Present and demonstrate our solutions in-person and via web-based presentations, • Approximately 50% travel on client site and to our US officesWho You Are, • 7+ years successful Software Sales Experience into the Manufacturing vertical is required, • Can explain the respective value chains for process and discrete manufacturing - including the key economic drivers; the business, people, and technical inter-dependencies; the digitalization opportunity with Industry 4.0, • Well-versed in important manufacturing use cases, such as yield optimization, production visibility, higher operator productivity, quality improvement, predictive maintenance, and higher machine utilization, • Experience with Operational Technology equipment and related software, such as Honeywell Connected Plant, Emerson Plantweb/AMS, GE/Meridum APM, Aveva, Bentley, and OSIsoft PI, • 7+ years of direct sales experience carrying and exceeding a quota and selling enterprise software/ software-as-a-service (Business Intelligence/ Data Warehouse/ Big Data/ Advanced Analytics/ Machine Learning) to C-level executives, • Proven track record meeting and exceeding software/SaaS bookings goals with new customers in a Direct sales role (not Channel or Partner-based), • Experience starting, managing, and closing complex sales cycles, • Trained in Command of the Message and/or MEDDPICC, • Detail oriented, strong relationship-building skills and a focus on a high level of customer service, • Excellent written and verbal communication skills, including stellar presentation skills, • Self-starter, able to work in a team environment, and superb time management and prioritization skills, • Savvy at helping customers create business cases with quantified ROI to justify new investments, • Familiarity with relevant technology, such as Big Data (Hadoop, Spark, Hive, BigQuery); Data Warehouses; Business Intelligence; and Machine Learning, • Start-up experience (Series A, B, or C) Apply today!If you're excited about the opportunity to work at Cognite and make a difference in the tech industry, we encourage you to apply today! We welcome candidates of all backgrounds and identities to join our team. We encourage you to follow us on Cognite LinkedIn; we post all our openings there. Equal OpportunityCognite is committed to creating a diverse and inclusive environment at work and is proud to be an equal opportunity employer. All qualified applicants will receive the same level of consideration for employment; everyone we hire will receive the same level of consideration for training, compensation, and promotion. We ask for gender as part of our application because we want to ensure equal assessment in the recruitment process. Your answer will help us reach this commitment! However, the question about gender is optional and your choice not to answer will not affect the assessment of your application in any way. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description FTS Houston is currently seeking a skilled Manual Lathe Operator with experience in machining valves, fittings, and precision components. This role involves operating manual lathes to produce and repair parts used in piping systems, fluid control, and mechanical assemblies. The ideal candidate will have a strong background in turning operations, thread cutting, and working with materials such as brass, stainless steel, carbon steel, or other alloys commonly used in valve and fitting production. Key Responsibilities: • Set up and operate manual engine lathes to machine parts to exact specifications, particularly valves, fittings, couplings, and connectors., • Perform turning, facing, threading (NPT, BSP, etc.), boring, grooving, and other lathe operations on components., • Read and interpret detailed engineering drawings, specifications, and work orders., • Measure and inspect parts using micrometers, thread gauges, calipers, and other precision tools to ensure adherence to tight tolerances., • Machine both new parts and rework/repair existing components as needed., • Work with a variety of metals, including stainless steel, brass, and specialty alloys commonly used in valve and fitting applications., • Ensure all machined parts meet pressure, sealing, and dimensional requirements for high-performance fluid and gas systems., • Maintain clean, organized work area and perform routine machine maintenance., • High school diploma or GED; trade or vocational training in machining preferred., • 2+ years experience operating manual lathes, preferably in a valve, fitting, or pipe manufacturing environment., • Proficient in using thread cutting tools and measuring instruments (thread pitch gauges, plug gauges, etc.)., • Familiarity with various thread types (e.g., NPT, BSP, UNF, metric) and pressure-rated fittings., • Ability to interpret detailed mechanical drawings and follow close tolerance machining requirements., • Strong mechanical aptitude and problem-solving skills.

Job Description DESCRIPTION: (Including but not limited to) Working within a team environment, the Blast Operator position is responsible for the blasting duties centered on ensuring parts to be coated are cleaned and prepped by customer specifications as contained within the work order. KEY FUNCTIONS • Will operate in machine blast operations, forcing abrasive material onto a component's surface through a nozzle., • Loads parts into sandblast equipment, maintains adequate supply of blast sand in hopper., • Configure and run blast machines in accordance with the customer’s specifications., • Collect materials, tooling, and blast products prior to initiating operation., • Use hand tools to repair, clean, and adjust equipment., • Comply with all company policies and procedures including Health, Safety and Quality Assurance policies., • Checks work visually, makes minor decisions; detects and reports defective items and unusual conditions to proper supervision., • Sand blasts parts following established methods and procedures to remove surface contaminants and imparts proper surface finish. WORK QUALIFICATIONS: Required: • A minimum of two (2) years of experience in a manufacturing or warehouse facility, • Proven proficiency in fundamental shop math, including handling fractions and decimals, • Proficient in the use of hand and power tools for successful job performance, • Ability to work in a team environment and effectively communicate, • Ability to follow directions and procedures, • 2-5 years of Industrial Gas Turbine Repair experience Required: HS diploma or GED WORK ENVIRONMENT: Reasonable accommodation may be made to enable qualified individuals with disabilities to perform essential functions. • Willingness to work a flexible schedule to meet the demands of the role., • Must be able to sit, stand and walk for long periods of time or until the end of the assigned shift. ADA JOB REQUIREMENTS: Reasonable accommodations will be made to ensure that the essential functions of the job can be performed and not hinder the employee's performance due to physical, mental, or emotional disability. EQUAL EMPLOYMENT OPPORTUNITY: Allied Power Group is an equal opportunity workplace. All employment decisions are made without regard to sex, race, color, religion, national origin, citizenship, age, disability, marital or veteran status, sexual orientation, gender identity or expression, or any other legally protected categories. This includes providing reasonable accommodation if requested for disabilities or religious beliefs and practices. Monday through Friday 3am - 3pm

Job Description Jumpstart Your Career as a CNC Machine Operator ? Day & Night Shifts Available Where Join a well-established manufacturing team in Houston, TX, serving the oil and gas industry. This is a clean, organized, and safety-focused production environment where teamwork, training, and career growth are top priorities. Job Highlights * Pay: Starting at $15/hr, with pay increase based on experience * Shifts: Day (5 am ? 5 pm) and Night (5 pm ? 5 am) * Schedule: Monday to Saturday * Location: Houston, TX * Benefits: Medical, dental, vision * Responsibilities * Set up and operate CNC machinery according to established procedures * Accurately complete work orders and record required production data * Follow all safety protocols and wear PPE at all times * Maintain attendance and punctuality to meet production goals * Keep the work area clean and organized * Perform other duties as assigned by supervisors Requirements * High school diploma or GED * At least 1 year of manufacturing experience preferred * Ability to operate hand and power tools safely * Ability to read, write, and speak English fluently * Capable of lifting 50 lbs repeatedly (up to 100 lbs with assistance) and pushing/pulling heavy objects with proper equipment Call to Action Ready to take the next step in your manufacturing career? Apply today and start your path toward a permanent role with growth potential. About LINK Staffing: For over 40 years, LINK Staffing has been a trusted leader in light industrial staffing, helping hardworking people find great opportunities with reputable employers. With offices throughout Texas, we specialize in connecting skilled talent with roles in manufacturing, logistics, warehousing, and distribution. Our mission is to create a positive impact by providing dependable workers to growing businesses while offering our field staff safe, stable, and rewarding jobs. At LINK Staffing, we believe in doing things the right way?treating every employee with dignity and respect, delivering exceptional service to our clients, and building lasting relationships rooted in trust. We’re proud to be a company where people come first, and results follow. #LINKJOBS #LinkHoustonJobs #ZR7050 Service Areas: LINK Staffing proudly serves job seekers in and around Houston, including Pasadena, Baytown, Sugar Land, Missouri City, Humble, Cypress, Katy, Pearland, League City, Spring, and surrounding communities. Company DescriptionAt LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort. Our unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.At LINK Staffing, we help job seekers like you find employment faster and more easily. Our team of staffing experts take the guesswork out of job hunting and help you find the right opportunities with less effort.\r\n\r\nOur unique commitment to enhanced employee benefits, payroll flexibility, and career development make us the perfect partner in finding opportunities throughout Texas.

Job Description We are seeking an Outside Sales Professional to join our team in the Houston area! You will pitch a new machine to bars and convenience stores that is free to them and makes money for them. Your challenge will be to reach the decision maker and get a signed contract. Responsibilities: • Present the product information to new customers, • Prospect and contact potential customers, • Set follow-up appointments to keep customers aware of latest developments, • Previous experience in outside sales, • Prior experience in B2B sales generating your own leads, • Prior experience building relationships with bars or convenience stores is preferred but not required., • Ability to build rapport with clients, • Strong negotiation skills, • Commission only - no base., • $1,500 for every agreement/address signed, • Expenses paid, • Our best sales reps make $130,000+ per year.

Job DescriptionJob DetailsLevelExperiencedJob LocationVilla Del Prado - Houston, TXJob CategoryService/MaintenanceDescription Our national multi-family management company seeks an experienced Service Manager with a "Whatever it Takes" attitude to be responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. JOB SUMMARY Along with the Community Manager, the Service Manager is responsible for overseeing the physical property, general maintenance repairs, and apartment make-ready, preventative maintenance, and construction/rehabilitation projects for an apartment community. The Service Manager oversees the maintenance staff and leads by example and must be available to handle groundskeeping and/or pool duties, as needed. REPORTS TO: Community Manager and Regional Maintenance Supervisor SUPERVISES: Under direction from the Community Manager, supervises all maintenance personnel, including housekeeper. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. 1. Under the direction of Community Manager, supervises, trains and schedules maintenance activities for apartment community and maintenance staff., 2. Coordinate, schedule and respond to resident/management requests and work orders for occupied units., 3. Coordinate, schedule and prepare vacant apartment units for move-in., 4. Coordinate and schedule appropriate safety and skills training for maintenance employees., 5. Identify and correct hazardous property conditions that could place the property in a liable position., 6. Ordering supplies and managing maintenance budget. DEGREES AND DIPLOMAS High school diploma or equivalent. Five years of multi-family experience or equivalent combination of education, training and experience that demonstrates the ability to perform the duties of this position. KNOWLEDGE, SKILLS, AND ABILITIES Must be able to handle plumbing repairs, tile work, HVAC equipment, appliance repair, carpentry repairs, electrical repair, and all facets of apartment make-ready. Must be able to operate common maintenance related tools including but not limited to: key machine, augers, lead detector, ampere meter, volt meter, recovery machine, manifold gauges, charging cylinders, steam clean/shampoo machine, spray paint rig, electric saws, cordless screwdriver, drill, air conditioners, boiler, water heaters, chlorine test kit, various screwdrivers, nut drivers set, pliers, various wrenches, wire crimping/stripping tool, diagonal cutter, drill bits, hammers, tape (ruler), tube cutter (copper), soldering torch and ladders. Must be able to apply common sense and understanding to carry out instructions and plans. Will interact regularly with residents, vendors, contractors, all levels of employees, and Clients and, therefore, must possess excellent interpersonal skills. Must be able to read and write in English to read diagrams, meters, instructions, write report, etc. Proficiency in using property management software(s) and Microsoft Office. Experience in compressor diagnosis, fire sprinklers and irrigation systems preferred. Must have basic knowledge of OSHA Requirements and Local, City and State Ordinances. Must supply own hand tools. TRAINING/CERTIFICATES/ASSOCIATION MEMBERSHIPS EPA Section 608 (HVAC/Freon Recovery certification) required. Certifications/Permits required City or State to perform job responsibilities required. Training in boiler repair, plumbing and mold detection/resolution required. Certified Apartment Maintenance Technician (CAMT) preferred. Certified Pool Operator (CPO) required #ZR

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Available Shifts • Maintains quality and tolerances within .0003”., • Follow written and verbal procedures for machining and other duties., • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions., • Working knowledge of programming languages and the ability to learn / adapt per machine., • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor’s instructions., • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc., • Presets tools and may be required to re-sharpen., • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications., • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor., • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor., • Make proper labor and time reports., • Perform other duties as required., • Keep machine(s) / work area clean and orderly., • Perform additional duties and responsibilities based upon individual branch requirements., • Additional duties as assigned.Qualifications, • High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent., • CNC machine tool Programming & Operating experience preferred., • 2 years of Integrex experience is highly preferred., • Numerical control machining skills experience and ability to read and interpret work related machine drawings., • Make average to complicated mathematical calculations and resolve elementary technical problems., • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency., • Can operate a minimum of 2 CNC machine tools., • Possesses previous experience as a Manual machinist., • Must be detail oriented; be able to work independently using sound judgment., • Good verbal, written, problem solving and organization skills required., • Capable of handling multiple priorities., • Ability to complete tasks in a timely and efficient manner. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Job Description CNC Job Fair Company Description Location: 4001 Fair Dr., Pasadena, TX 77507 Walk-ins welcome! Meet our hiring team, tour the facility, and interview onsite. Walk away with a job offer! Friday – September 26, 2025 from 7:00 am to 6:00 pm Eligibility: To attend, you must have CNC Machinist experience or formal training. Available Shifts • 2nd Shift: Monday–Friday, 4:30 PM – 3:30 AM, • Maintains quality and tolerances within .0003”., • Follow written and verbal procedures for machining and other duties., • Work from work order routings, prints, sketches, layout sheets, written and verbal instructions., • Working knowledge of programming languages and the ability to learn / adapt per machine., • Must be able to recognize and understand functions of machine parameters with the ability to modify as required per supervisor’s instructions., • Utilize knowledge of working properties for a variety of materials such as stainless steel, alloy steel, cast iron, brass, exotics, etc., • Presets tools and may be required to re-sharpen., • Inspect work produced using micrometer; bore gage, venire calipers, or other measuring instruments to verify conformance to specifications., • Follow preventative maintenance procedures on equipment as prescribed by supervisor and report operating difficulties of equipment to supervisor., • Perform duties in accordance with company safety policies, reports unsafe conditions to supervisor., • Make proper labor and time reports., • Perform other duties as required., • Keep machine(s) / work area clean and orderly., • Perform additional duties and responsibilities based upon individual branch requirements. High school diploma or equivalent with a technical school education and working machinist knowledge or equivalent. • CNC machine tool Programming & Operating experience preferred., • 2 years of Integrex experience is highly preferred., • Numerical control machining skills experience and ability to read and interpret work related machine drawings., • Make average to complicated mathematical calculations and resolve elementary technical problems., • CNC Programmer/Operator will be compensated in accordance with defined expertise, experience and production efficiency., • Can operate a minimum of 2 CNC machine tools., • Possesses previous experience as a Manual machinist., • Must be detail oriented; be able to work independently using sound judgment., • Good verbal, written, problem solving and organization skills required., • Capable of handling multiple priorities. With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc) Company DescriptionJohn Crane is a global provider of engineered solutions for rotating equipment, specializing in mechanical seals, filtration systems, and support systems for industrial applications. Founded in 1917 and headquartered in Chicago, Illinois, the company serves a variety of industries, including oil and gas, chemical, and power generation. John Crane focuses on enhancing the performance and reliability of its clients' equipment while reducing maintenance and operational costs. Its solutions are designed to improve efficiency, safety, and environmental compliance.John Crane is a global provider of engineered solutions for rotating equipment, specializing in mechanical seals, filtration systems, and support systems for industrial applications. Founded in 1917 and headquartered in Chicago, Illinois, the company serves a variety of industries, including oil and gas, chemical, and power generation. John Crane focuses on enhancing the performance and reliability of its clients' equipment while reducing maintenance and operational costs. Its solutions are designed to improve efficiency, safety, and environmental compliance.

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description We are seeking a skilled and passionate CNC Training Specialist to lead the development and delivery of comprehensive CNC training programs for both new hires and experienced operators. This role is critical to enhancing the efficiency, safety, and quality of our production processes. Key responsibilities include: • Hands-On CNC Training: Deliver practical, on-the-floor instruction covering CNC machine setup, tooling, programming (including G-code), and safety protocols. Ensure trainees gain real-world experience and confidence in operating CNC equipment., • Global Standards Alignment: Provide training that meets or exceeds global standards for CNC operation, programming, and maintenance. Ensure consistency across all training programs in alignment with John Crane and industry benchmarks., • Training Program Development: Collaborate with management and process experts to continuously update and improve training materials. Ensure content reflects current technologies, best practices, and company objectives., • Skills Matrix Documentation: Create and maintain a detailed skills matrix to track operator competencies, identify training needs, and support career development planning., • Technical Support & Troubleshooting: Assist operators in diagnosing and resolving technical issues related to CNC machine operation and programming. Act as a resource for problem-solving and continuous improvement., • Performance Assessment: Monitor trainee progress through assessments and feedback sessions. Provide constructive guidance to support skill development and performance improvement., • Leadership & Training Capability: Demonstrate strong leadership and interpersonal skills. Effectively train and mentor individuals across various experience levels and learning styles.Qualifications To be successful in this role, candidates should meet the following qualifications: • Education: High school diploma or equivalent required. Postsecondary education in CNC operations (certificate or associate degree) is strongly preferred., • Technical Experience: Hands-on experience with CNC Lathes, CNC Mills, and Intergrex machines is highly desirable. Proven ability to operate and train on a variety of CNC equipment., • Machining Knowledge: Strong understanding of machining principles, blueprint reading, and applied mathematics. Ability to interpret technical drawings and specifications accurately., • Programming Expertise: Proficiency in CNC programming, including G-code. Experience with CAD and CAM software is a plus., • Communication Skills: Ability to explain complex technical concepts in a clear, engaging, and accessible manner to diverse learners., • Problem-Solving & Detail Orientation: Strong analytical skills and attention to detail. Capable of identifying issues and implementing effective solutions., • Shift Flexibility: Willingness and ability to work across all shifts, including weekends, to meet training needs and support production schedules. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Houston, TX. These are mainly first shift opportunities with a pay rate of $30-35/hour dependent on experience & skill level. If you are a Machinist/Machine Operator and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • Running Extruders, • Run CNC Machines, • Lathe, Mill & Grind, • Proper PPE Must be Worn, • Attention to Detail, • Safety First Mentality Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description We are seeking an experienced wide / large format digital press operator to work on large format printing equipment including roll and sheet fed, heat presses, CNC cutters, laminators and more. Willing to learn new pieces of equipment is a must. Large format experience such as Inca, Uvistar and Vutek background is needed. Knowledge of prepress (EFI Fiery) and the ability to set up files is important. Experience with Graphic art software such as Adobe Creative Suite and Pitstop, Efi workflows, and CNC is preferred. Skills: Operating solvent or wide format printers, CNC; cutting substrates and sign finishing. Weeding and taping; aligning vinyl on a substrate; using a squeegee; operating light, etc. Attention to quality, troubleshooting and prioritizing work flows in addition to being able to operate and maintain the necessary finishing equipment. Under general direction, the operator is responsible for all aspects of large / wide format production. This is a high volume fast paced environment. RESPONSIBILITIES • Works with co-workers and customers with file transfers, FTP access, photo library options, online proofs, etc., • Inspects jobs for accuracy before sending them to the plotter or printer, • Provides proofs as necessary, • Maintains accurate electronic and paper record of File Storage and Disks, • Follows a layout to place computer-generated vinyl or full color graphic images on a pre-determined substrate or medium, • Prepares substrates for application, • Performs finishing operations such as laminating, encapsulating, and/or mounting of printed pieces, • Installs signs and graphics, • Performs other duties as needed, such as consulting with customers, etc., • Follow a layout to place computer-generated files per job instructions on wide format digital presses or vinyl or full color graphic image(s) on a predetermined substrate or medium., • Accurately prepare substrates for application. This may include cutting, painting, laminating, cleaning and maintaining the substrates for application., • Perform quality assurance measures pre- and post-construction by accurately reading and interpreting a Work Order and then proofing for errors or unacceptable standards (dpi, bubbles, ragged edges, loose seams)., • Perform finishing operations such as laminating, encapsulating, and/or mounting of printed pieces., • Thread laminating or encapsulating material into machine, set temperature, pressure, and side guides for proper feeding of material., • Operate the laminator maintaining proper fit and settings, and feed material into laminator., • Communicate with other employees and customers in a calm and professional manner; express self verbally and listen well., • Report inventory levels and stock to be reordered to the manager., • Help unload and store raw materials; clean and maintain storage areas., • Maintain production rate consistency; meet or exceed established minimum rates., • Work on different projects simultaneously., • Run proof sheet and secure approval for production run., • Perform routine machine maintenance and minor repairs when necessary., • Keep the production area neat, clean and organized., • Understand the ordering process enough to take an order if necessary., • Clean and maintain equipment and other tools as necessary., • Perform installations as necessary., • Production and manufacture of digital printing and finishing. Company DescriptionAward winning, commercial full service printing and promotional products company started in 1977. We value our people, our customers, and delivering a high quality product on-time.Award winning, commercial full service printing and promotional products company started in 1977. We value our people, our customers, and delivering a high quality product on-time.

Job Description The Tyndale Company, an 9x Top Workplace winner in PA/4x Top Workplace winner in TX, is seeking an Embroidery Machine Operator on 1st Shift in our Houston Distribution Center! In this role, you will be responsible for operating an industrial embroidery machine, performing all aspects of the garment embroidery process! Shift: Monday through Friday, 6:00 am – 2:30 pm Click this link to learn more about a day in life of a Tyndale Machine Operator: Responsibilities • Organize daily workflow to maximize embroidery production efficiency, • Determine appropriate logo to be embroidered on garments based on viewing pick ticket, • Scan pick ticket to track and load garment and embroidery specifications, • Input logo into embroidery machine using our customized software system, • Pay close attention to machine to ensure that it is functioning properly, • Verify quality of finished embroidered garment, • Work with Embellishments Supervisor to resolve any machine issues, • Perform daily maintenance on embroidery machine, • High school diploma or equivalent required, • Must possess basic computer knowledge, • Must be able to lift up to 20 lbs. without assistance and standing at all times, • Excellent attention to detail and ability to focus, • Previous embroidery machine operation experience is preferred but not required, • Health & Wellness: Comprehensive medical, dental, and vision insurance with competitive premiums. Paid parental leave. Mental health support through an EAP and partial reimbursement on copays, fertility support, and robust wellness programs with annual reimbursements., • Work-Life Balance: Many positions with Tyndale offer hybrid onsite + remote work schedules, generous PTO, paid holidays + a floating holiday, and more., • Financial Compensation: Competitive salary, 401(k) with matching, and bonus opportunities., • Career Growth & Development: Training/certification/tuition reimbursement programs and demonstrated paths for knowledge share and internal promotion opportunity., • Culture & Perks: Family-owned values, award winning culture, team-engagement events, casual dress code, company-sponsored charitable events and activities, and an inclusive workplace that values collaboration and integrity., • Safety: As part of our commitment to safety and comfort, all Distribution Center members receive an annual footwear stipend to purchase high-quality, work-appropriate shoes. This ensures our team is equipped with the right gear to stay safe, supported, and productive on the job. About Tyndale Tyndale Company, Inc. is a single-supplier solution for keeping workers safe, comfortable, and regulation-compliant. We deliver top-quality, arc-rated flame resistant (FR) clothing and uniforms by way of managed apparel programs, driven by over 40 years of FR experience. We serve the electric utilities, oil and gas, transportation, and other industries across all 50 states and Canada. We believe that the key to our success is our employees and Tyndale has been recognized as an award-winning, employee-rated Top Workplace in the Greater Philadelphia and Houston areas. Our values are exhibited in every phone call, every order, and every shipment that goes out with our name on it, and we are dedicated to continually raising the bar on the products and services we offer. Qualified candidates are encouraged to apply on our website, . E.O.E Company DescriptionAbout Tyndale Tyndale Company, Inc. is a single-supplier solution for keeping workers safe, comfortable, and regulation-compliant. We deliver top-quality, arc-rated flame resistant (FR) clothing and uniforms by way of managed apparel programs, driven by over 40 years of FR experience. We serve the electric utilities, oil and gas, transportation, and other industries across all 50 states and Canada. We believe that the key to our success is our employees and Tyndale has been recognized as an award-winning, employee-rated Top Workplace in the Greater Philadelphia and Houston areas. Our values are exhibited in every phone call, every order, and every shipment that goes out with our name on it, and we are dedicated to continually raising the bar on the products and services we offer. Qualified candidates are encouraged to apply on our website, . E.O.EAbout Tyndale \r\nTyndale Company, Inc. is a single-supplier solution for keeping workers safe, comfortable, and regulation-compliant. We deliver top-quality, arc-rated flame resistant (FR) clothing and uniforms by way of managed apparel programs, driven by over 40 years of FR experience. We serve the electric utilities, oil and gas, transportation, and other industries across all 50 states and Canada. We believe that the key to our success is our employees and Tyndale has been recognized as an award-winning, employee-rated Top Workplace in the Greater Philadelphia and Houston areas. Our values are exhibited in every phone call, every order, and every shipment that goes out with our name on it, and we are dedicated to continually raising the bar on the products and services we offer.\r\n\r\nQualified candidates are encouraged to apply on our website,

Job Description CNC Operator Job Description Responsibilities: CNC VTL operator is responsible for setting up and operating CNC vertical lates to machine parts. Please see the requirements for this role: • Proficient in reading and interpreting blueprints, drawings, and technical specifications., • Experience with CNC controls ( Fanuc, Siemens) preferred., • Familiar with G-Code and M- Code, • Skilled on tool changes, offsets, and set-up adjustments., • Knowledge of calipers tape measure, and other measuring tools., • Understanding of tolerances and surface finish requirements., • Ability to lift 25-50 lbs. regularly, • Stand for long periods, bending and manual moving., • Knowledge of basic programming or editing G-code at the machine., • Experience with large-diameter parts., • Understanding of tool wear and machine maintenance., • Strong attention to detail., • Teamwork and communication skills., • Commitment to safety protocols and quality control. Company DescriptionWe offer an excellent compensation and benefits package that includes medical, dental, vision, life, 401(k), disability, and paid time off. Allied Group's people deliver expertise born of experience. We understand the needs of our customers because we know what matters to them most. Our capabilities include on-staff metallurgists, several quality-control specialists, and skilled customized finishing professionals. Opportunity for Growth! Must be able to pass physical, background and drug test.We offer an excellent compensation and benefits package that includes medical, dental, vision, life, 401(k), disability, and paid time off. Allied Group's people deliver expertise born of experience. We understand the needs of our customers because we know what matters to them most. Our capabilities include on-staff metallurgists, several quality-control specialists, and skilled customized finishing professionals. Opportunity for Growth!\r\n\r\nMust be able to pass physical, background and drug test.

Job DescriptionThe CNC Machine operator ensures that the machine is set up properly, functioning well, and producing quality products. He or she runs the machine and adjusts it to control speed, material feed and the punching process. The ideal candidate is safety minded, embraces change, is a problem solver, an innovative thinker, and is experienced in prioritizing production runs to ensure that parts are available to meet production demands. Machine operator can sort jobs by material and/or part numbers, sequence operations, and pull/stock material as required. CORE VALUES: • Customer Focused (develop relationships, exceed expectations, treat customers like you would like to be treated), • Respect ( employees, customers, suppliers, our brand), • Teamwork ( collaboration, open communication, be passionate and have fun), • Results Driven (strong will to win; work to standard, not to time), • Kaizen (continuous improvement; embrace change; don't settle, share ideas)WE OFFER:, • Competitive pay, • Great benefits package, • Excellent growth opportunities, • Great work/life balance. Job Responsibilities:, • Work safely utilizing proper protective equipment and following all safety procedures. Maintain a clean and safe working environment., • Produce parts for assembly operations that require horizontal milled features, • Safely perform loading and unloading of material. Change tools and select required machine programs that ensure the quality and productivity., • Follow all manufacturing inventory control procedures and additional paperwork as required., • Learn other appropriate manufacturing job functions and serve as back up in other areas when required., • Assist with machine preventive maintenance using proper lock out/tag out procedures as required., • Meet or exceed productivity per company standards and document downtime and up-time data as required., • 2-5 years’ experience on a CNC horizontal mill or similar machine in a manufacturing environment. Experience with Elumatec and/or Emmegi is a plus., • Basic understanding of G-Code CNC programming, • Experience in a lean manufacturing or continuous improvement manufacturing environment is a plus., • Ability to accurately use and read tape measure, calipers and others as required., • Ability to read drawings and blueprints., • Attention to detail and when in doubt “Stop & Ask”., • Must pass background check as well as pre-employment physical and drug screen. Powered by JazzHR B3pLP5eXfh

Job DescriptionWe’re hiring a Cut-to-Length Line Operator for our growing client in the Southeast Houston area.We are looking for an experienced, reliable, hard-working employee to join our client’s team! DESCRIPTION OF YOUR DREAM JOB:Job Title: Cut-to-Length Line OperatorLocation: Southeast Houston areaPay: $17.50 - $20 per hour DOEHours: 6am-3:30pm M-FDuration: Temp-to-hireDescription of Duties: Operating a Hot-Rolled Cut-to-Length Line.Requirements: 3+ years’ operating experience; Able to perform basic machine maintenance; Ability to do basic math calculations; Excellent attendance, leadership skills, and strong safety awareness are a must. WHO WE ARE: Carlton Staffing is a local staffing firm in Texas with 44 years of experience! We have connection with numerous hiring managers throughout Houston, Dallas and Fort Worth. An application with us is an open application with our rock-star clients. Don't wait another minute! Let our knowledgeable staff assist you today, visit .

Job Description Summary: Seeking an experienced Millwright with Industrial troubleshooting experience to assemble, install, test and maintain Mechanical Equipment, using hand, power, and precision measuring tools. The Millwright diagnoses malfunctioning systems, apparatus, and components, using test equipment and hand tools, to locate the cause of a breakdown and correct the problem and maintain production machinery throughout the plant which consists of Heat Treatment Operations, Hydrotester, threading equipment and controls. . The Millwright responsible for all aspects of Maintenance and additionally, responsible for observing and following all safety regulations with required PPE. Duties and Responsibilities: • Replace defective parts of machine or adjust clearances and alignment of moving parts, • Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs, • Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation, • Repair and lubricate machines and equipment, • Assemble and install equipment, using hand tools and power tools, • Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures, • Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline, • Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts, • Move machinery and equipment, using hoists, dollies, rollers, and trucks, • Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools, • Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools, • Lay out mounting holes, using measuring instruments, and drill holes with power drill, • Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit, • Level bedplate and establish centerline, using straightedge, levels, and transit, • Dismantle machines, using hammers, wrenches, crowbars, and other hand tools, • Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment, • Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team, • Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel, • Operate engine lathe to grind, file, and turn machine parts to dimensional specifications, • Perform rigging activities, safety-related functions and other miscellaneous electrical functions, • Demonstrate safe and proficient use of shop tools (both hand and power), • Demonstrate mechanical knowledge, • Must possess demonstrated ability to safely utilize a forklift and high lift, • Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair equipment, • Perform installation and maintenance work as part of a team of skilled trade workers, • Perform Welding and Fabrication functions as assigned, • Must have experience with fluid systems for installing, troubleshooting and maintaining (Hydraulics and Pneumatics), • Perform duties in a work environment that will be hot, cold, dirty and fast-paced, • Self-starter yet able to take orders as directed, • 1 to 2 years Millwright experience, • High School diploma or equivalent, • Candidates will be required to pass a pre-employment background, drug and work screen, • Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime

Job Description Company Profile: CNPC USA is a subsidiary of China National Petroleum Company and serves as the North American headquarters. Our goal is to provide innovation, research, and development of new technologies for Oil and Gas Exploration and Production. Job Summary: We are looking for a highly driven and technically skilled Drilling Automation Engineer to design and implement advanced algorithms and predictive models that enhance drilling performance, reduce failure risk, and improve overall operational efficiency. The ideal candidate will bring deep expertise in automation, data science, and drilling operations, with a passion for solving complex engineering problems through intelligent systems. Responsibilities: • Develop predictive algorithms and machine learning models to minimize tool and equipment failures during drilling operations., • Design and implement real-time optimization models to enhance rate of penetration (ROP), reduce non-productive time (NPT), and improve drilling efficiency., • Build intelligent algorithms to enhance directional drilling accuracy and improve, well trajectory performance., • Create early warning and downhole incident detection systems, leveraging real-time sensor data and historical trends to proactively identify anomalies., • Collaborate closely with drilling engineers, software developers, and field operations teams to ensure effective deployment of automation solutions on live rigs., • Integrate developed models into surface and downhole applications across a variety of digital platforms., • Interface with rig control systems, operator platforms, and service company tools to ensure compatibility and seamless operation., • Document model development, validation, and deployment processes in line with industry standards and internal QA/QC protocols., • Other duties as assigned. Qualifications: • Master’s or PhD in Engineering, Computer Science, Petroleum Engineering, or a related discipline., • 5 to 7 years’ experience with a solid understanding of drilling automation systems, control logic, and wellsite operations., • Hands-on experience in developing and deploying software solutions for surface and/or downhole drilling applications., • Familiarity with drilling automation platforms used by major operators, contractors, and service companies (e.g., NOV, Nabors, Halliburton, Schlumberger, ExxonMobil, etc.)., • Proficiency in data science, artificial intelligence (AI), and machine learning (ML) principles and applications., • Strong programming skills in Python, MATLAB, or other relevant tools/languages., • Experience working with real-time drilling data (e.g., WITS/WITSML, rig telemetry systems)., • Knowledge of drilling dynamics, directional drilling principles, and rig systems is a strong plus. Preferred Experience: • Prior experience building and training machine learning models with large sensor datasets., • Experience with cloud computing environments and digital twin platforms., • Familiarity with time-series data analysis, signal processing, and anomaly detection techniques. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is a sedentary role; however, some filing, bending and the ability to lift 20lbs is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position has no direct supervisory responsibilities, however, does act as a mentor and point of contact for less experienced engineers. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job DescriptionDescription: Lane Enterprises is excited to welcome a Mobile Equipment Operator to their team! From generous benefits, including monthly bonus opportunities and an Employee Stock Ownership Plan (ESOP), to great employee retention, this is a fantastic opportunity to join a thriving organization! Benefits: Lane offers a generous benefits package to include Medical, Dental, Vision, 401k, Paid Time Off, Paid Holidays, Pension plan, Flexible Spending, Company paid Life Insurance, Voluntary Life Insurance, ESOP opportunity and a generous bonus incentive plan. Job Summary: A mobile equipment operator is responsible for safely operating a forklift and for transporting products around the facility. Essential Responsibilities: Efficiently handle the forklift in lifting, moving and packing loads of metal and plastic pipe that can vary in weight of up to 15,000 lbs. Navigating tight spaces without causing damage to Lane products. Complete daily check list on machine and report all problems promptly to the mechanical staff or Supervisor. Drive defensively and be able to safely carry a load while driving among pedestrians walking in front of and behind the forklift. Operator stores inventory in such a manner that facilitates rotating inventory. Cutting and loading scrap pipe, cleaning forklift, cleaning breakroom, organizing coil storage, sweeping mill area, among other duties as assigned. Requirements: Required Skills & Abilities: • Possess a strong mechanical ability., • Must be able to do basic math., • Knowledge of the physics of load and weight distribution and center of gravity., • High School diploma or equivalent., • Must be able to pass forklift certification training and physical exam., • Must be able to lift loads of up to 100 pounds without the lift truck., • Ability to climb, bend, squat, kneel, crawl, and reach above shoulder level., • Ability to withstand varying temperatures., • Must be able to work in different positions for a very long period of time and ability to sit, stand, bend, kneel or walk for up to eight (8) hours at a time., • Must be able to utilize appropriate Personal Protective Equipment required for each job task (Steel toed shoes, eye protection, hearing protection, gloves, hard hat).