Trabajos machine operator en Lubbock, TexasCrear alertas

Job Description PLAINSMAN COMPANY, LLC. JOB DESCRIPTION Meal Room Operator Department: 71 Reports To: Shift Supervisor FLSA Status: Non-Exempt Worker Category: FT, Tmp, Seasonal SUMMARY: Responsible for Load-Out Operations-Meal and Hull Load out. Provides assistance and guidance to Meal Room/Load Out employees and Supervisor while working in the capacity of Load Operator inside the Hull Room and Meal Room. ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following: (Other duties may be assigned) Completing daily tasks given by department Lead Person Maintain settings on equipment per Supervisor specifications Report mechanical and electrical equipment problems to Supervisor Perform and complete routine maintenance for department equipment such as lubricating, cleaning, and repairing. Maintain good housekeeping practices instructed by Supervisor Instruct and enforce company safety rules: (IE LOTO, PPE, and Machine Guarding, and Etc.) Report accidents, near misses, and incidents to the Supervisor and Safety Director Keep equipment in good operating condition Maintain operations inside Hull Load out and Meal Load out areas Drive a front end loader to load trucks with commodities SUPERVISORY RESPONSIBILITIES: None USER-DEFINED; Assists in other areas as directed by supervisor. Must comply with all PLAINSMAN COMPANY, LLC.rules, regulations, and safety procedures. Must comply with all applicable OSHA, EPA, and DEQ regulations QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions if Supervisor sees Reasonable Accommodation regs. EDUCATION AND/OR EXPERIENCE: Less than high school education; or up to one minted experience or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add and subtract two digit numbers and to multiply and divide with l0s and 100’s. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY; Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. CERTIFICATES, LICENSES, REGISTRATIONS: Drivers license preferred. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to talk, visually see, or hear. The employee is occasionally required to use hands to finger, handle, or feel objects tools or controls; reach with hands and arms; climb or balance; Stoop kneel, crouch, or crawl; and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and in outside weather conditions. The employee occasionally works in high, precarious places and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate. Use of personal protective equipment such as safety glasses, respirators, hearing protectors, etc. is required in designated areas. (Per OSHA) Equal Employment Opportunity (EEO) Statement PLAINSMAN COMPANY, LLC. is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status, or any other legally protected status. We value diversity and inclusion in our workplace and believe that a variety of perspectives foster innovation and success. Our hiring, promotion, compensation, and training practices are designed to ensure fairness and equity for all employees. PLAINSMAN COMPANY, LLC. complies with all applicable federal, state, and local laws governing nondiscrimination in employment, including but not limited to Title VII of the Civil Rights Act, the Americans with Disabilities Act (ADA), the Age Discrimination in Employment Act (ADEA), and other relevant statutes

Job Description SUMMARY: Responsible for refining, bleaching, and deodorizing operations. Assists the supervisor while working as an operator. ESSENTIAL DUTIES AND RESPONSIBILITIES: include the following: (Other duties may be assigned) • Complete daily tasks assigned, • Maintain settings on equipment per Supervisor and Lead specifications, • Report mechanical and electrical equipment problems to Supervisor, • Perform routine maintenance on department equipment such as lubricating, cleaning, and repair, • Perform cross-training on all job requirements, • Maintain good housekeeping practices instructed by Supervisor and Lead Man, • Maintain and enforce company safety rules: (IE LOTO, PPE, and Machine Guarding. Etc.), • Report accidents, near misses, and incidents to the Supervisor, Safety Director, and Lead Man, • Keep the equipment in good operating condition SUPERVISORY RESPONSIBILITIES: None USER-DEFINED; Assists in other areas as directed by supervisor. Must comply with all Plainsman Company, LLC. rules, regulations, and safety procedures. Must comply with all applicable OSHA, EPA, and DEQ regulations QUALIFICATION REQUIREMENTS: To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND/OR EXPERIENCE: Less than high school education; or up to one minted experience or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add and subtract two-digit numbers and to multiply and divide with 10s and 100s. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY; Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. CERTIFICATES, LICENSES, REGISTRATIONS: Driver’s license preferred. SQF FOOD SAFETY: Knowledge and adherence to • RBD Plant entry-Visitor Policy/protocol, • Sanitation, • Personal Hygiene, • Allergen Control, • Crisis Management, • Glass, Brittle Plastic, and Ceramics Policy, • Uniform Policy, • Hair and Beard Nets, • Company Vehicle access, • SQF PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and walk. The employee frequently is required to talk or hear. The employee is occasionally required to use hands to finger, handle, or feel objects tools or controls; reach with hands and arms; climb or balance; Stoop kneel, crouch, or crawl; and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and in outside weather conditions. The employee occasionally works in high, precarious places and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, risk of electrical shock, and vibration. The noise level in the work environment is usually moderate. Use of personal protective equipment such as safety glasses, respirators, hearing protectors, etc. is required in designated areas. (Per OSHA) Equal Employment Opportunity (EEO) Statement Plainsman Company, LLC. is committed to providing equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status, or any other legally protected status. We value diversity and inclusion in our workplace and believe that a variety of perspectives foster innovation and success. Our hiring, promotion, compensation, and training practices are designed to ensure fairness and equity for all employees. PLAINSMAN COMPANY, LLC. complies with all applicable federal, state, and local laws governing nondiscrimination in employment, including but not limited to Title VII of the Civil Rights Act, the Americans with Disabilities Act (ADA), the Age Discrimination in Employment Act (ADEA), and other relevant statutes. Rotating days, 7 am 7 pm.

Job Description ROLE AND RESPONSIBILITIES Machine Operators I must have a strong understanding of the machines they work with and are responsible for ensuring our company produces on-time quality parts for our customers. In-depth training may be required to prepare a Machine Operator for their daily duties. The essential duties and responsibilities include, but are not limited to: • Ability to start and stop the machine safely without supervision., • Ability to place unfinished parts and remove finished parts from machine safely., • Monitor machine operation., • Check part quality with designated measurement instruments. Understand when and how to stop machine safely., • Assist in the maintenance, and repair of machinery., • Operate tools and machinery to aid the manufacturing process., • Perform periodic checks on equipment and troubleshoot issues as they arise., • Oversee the machine while executing tasks and make necessary adjustments to improve results., • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager., • Record all machine actions and log completed parts for record keeping., • Assume responsibility for ensuring the duties of this position are performed in a safe and efficient manner., • Keep a clean and orderly work area., • Willingness to work occasional rotating shifts that may include early or late hours, weekends, or overtime if necessary., • Perform other duties that may be assigned by the Plant Manager. QUALIFICATIONS AND EDUCATION REQUIREMENTS • To perform this job successfully, an individual must be willing to learn and improve to perform each essential duty satisfactorily., • High school diploma or GED required. Adequate work experience may be substituted in lieu of diploma or GED., • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility., • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC’s, and other mechanical machinery., • Bilingual language skills in English and Spanish., • Ability to work well with others, be organized and detail-oriented., • Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time., • Willingness to work in occasional rotating shifts that may include early or late hours, weekends, or overtime if necessary. ADDITIONAL NOTES • Satisfactory pre-employment drug testing is required., • All applicants must be authorized to work in the U.S. COMPENSATION AND BENEFITS • After 30 days of employment, employee is eligible for company benefits including medical, dental, vision, sick pay, vacation accruals, and 401(k).

Job Description Dura-Line is hiring for a Downstream Operator in Lubbock, TX. About Orbia Connectivity Solutions Dura-Line: Join Dura‑Line, an Orbia Connectivity Solutions business, where we create solutions that connect people and information across the globe. As a leading global manufacturer of conduit products and accessories, Dura‑Line creates the pathways that power connectivity across a wide range of markets worldwide. Quality, safety, and sustainability are at the core of everything we do, with environmentally responsible practices embedded throughout our manufacturing processes. Be part of our shared mission with Orbia to Advance Life Around the World. Shift Details: We are currently hiring for both Day & Night shift Phase 1: During our initial startup the site will be operating 24/5, Monday - Friday Phase 2: Before the end of the year, once lines are commissioned, we will transition to a 24/7 schedule that will work either 6:45am-7pm or 6:45pm-7am on a 2-2-3 schedule 2-2-3 SCHEDULE WEEK 1 - MON/TUE, FRI/SAT WEEK 2 - SUN, WED/THUR Only Work 15 days a month!!!! Every Other Weekend is a 3 DAY WEEKEND !!!! Key Responsibilities: Use tools and measuring devices to ensure the final product meets specifications and to catch abnormalities. Collaborate with team members so orders are wound onto reels correctly. Ensure neat wraps on reels. Cut, tie off, and cap conduit when reels or cable are complete. Monitor print and footage, and make corrections as needed. Perform checks for product and packaging requirements. Complete paperwork for inventory transactions. Assist the Line Operator during start-ups and support operators with cutting, tie-offs, and reel changes. Participate in training, safety, and continuous improvement activities. Report unsafe conditions and broken equipment. Requirements: High school education preferred. Basic math/measurement & reading comprehension skills At least 6 months of equipment or machine operation experience in a manufacturing environment. Ability to maintain safety, quality, and attention to detail in repetitive activities. Experience using measuring devices and hand tools. Ability to follow work instructions and use basic math. Material handling or forklift experience preferred. Physical requirements include moving around obstacles, wearing PPE, standing and walking for 12 hours, working around hot machinery, weather, and noise, and lifting, pushing, or pulling up to 50 lbs. Perks of Joining Our Team ✅ Medical, Dental, and Vision Insurance Benefits Starting Day One!! ✅ Strong 401(k): up to 6% company match, + automatic 3% company contribution ✅ Quarterly Performance, Referral Bonus, Sign On Bonus, and/or other rewards if applicable!! ✅ Generous Paid PTO, Sick Time & Parental Leave!! ✅ Company-Paid Insurance Coverage!! ✅ Career Growth & Wellness Support!! ✅ Tuition, Fitness, Safety Boots & Safety Glasses Reimbursement!! Our Offer: The compensation for this position is typically start at $19/Hour. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, USA 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, education reimbursement, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. JOIN OUR GROWING TEAM TODAY! As part of Orbia Connectivity Solutions, Dura-Line offers an exciting work environment and career opportunities in a continuously growing company. We are committed to attracting, developing, and retaining a diverse workforce that reflects our global customer base. Acquisition based on this vacancy is not appreciated and unsolicited applications from third parties will not be accepted. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Orbia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Description POSITION SUMMARY Machine Operator V is responsible for operating machinery in Lubbock, TX. Machine Operator V involves basic tasks related to machine operation and production support. Machine Operator V works under supervision and follows established procedures to ensure the efficient and safe operation of equipment. ROLE AND RESPONSIBILITIES • Ability to start and stop the machine safely without supervision., • Control and adjust machine settings (e.g. speed)., • Ability to place raw material or unfinished parts and remove finished parts from machine safely., • Monitor machine operation., • Check part quality with designated measurement instruments., • Understand when and how to stop machine safely., • Perform basic maintenance tasks on machinery, such as cleaning and lubrication., • Operate tools and machinery to aid the manufacturing process., • Perform periodic checks on equipment and troubleshoot issues as they arise., • Oversee the machine while executing tasks and make necessary adjustments to improve results., • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager., • Record all machine actions and log completed parts for record keeping., • Keep a clean and orderly work area., • Perform other duties that may be assigned by the Plant Manager., • Read and understand drawings., • Ability to change machine Setting to accommodate different sizes and dimensions., • Must have a further understanding of thread dimensions and thread terminology., • Ability to guide Machine Operators with ongoing obstacles., • Understand Custom Pipe part number convention., • Mentor, support and train Machine Operators., • Knowledge and experience in different Machine Operator levels., • Ability to program and calibrate CNC in applicable areas., • Completely understands manufacturing cell, has operated all machines and understands all processes., • Manages the workflow and ensures quality in all operation., • Assists supervisor in day-to-day production needs., • Attends production meetings., • Report any all safety and quality issues. QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or equivalent. Adequate work experience may be substituted in lieu of a diploma or GED., • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time., • Willingness to work occasional rotating shifts that may include early or late hours, weekends, or overtime if necessary., • Basic mechanical aptitude and ability to learn new tasks quickly., • Strong attention to detail and quality orientation., • Ability to work effectively in a team environment., • Strong ability to read, write and communicate effectively., • Willingness to follow safety protocols and procedures (e.g. constant use of Personal Protective Equipment (PPE))., • Perform each essential duty satisfactorily., • Manage and enforce PPE requirements, • Ability to read, write and speak in English PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility., • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC’s, and other mechanical machinery. Physical • Ability to lift up to 50 lbs, team lift, • to bend, and to stand or walk for long periods of time. Starting pay is negotiable and commensurate with demonstrated experience and expertise. Relocation assistance will be available for successfully selected candidate outside the Lubbock surrounding area(s).

Job Description We are looking for a MACHINE OPERATOR to join our LUBBOCK, TX plant. As a Machine Operator with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications. You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employees Why apply? • Competitive pay, • Medical and prescription drug coverage, • Dental and vision coverage, • Health savings and flexible spending account, • 401(k) with company match, • Life insurance and disability coverage, • Paid vacation, • Paid holidays, • Growth & Development opportunities, • Employee Discounts, • Mental Health through our Employee Assistance Program, • Wellness benefits including low-cost gym memberships About the Role: Responsibilities: • Perform a variety of job duties such as welding, work from shop drawings, sketches and other information., • Operate production equipment and material handling equipment and align machines, • Make inspections and periodic checks of equipment to detect mechanical difficulties; maintain necessary service records as required, • Understand operation and maintenance of equipment and related processing equipment, • Operate a forklift, • Observe, understand and apply all administration and safety precautions, rules and procedures throughout the plant, • Maintain work area in a clean, organized and safe manner, • Train and mentor new team members, • Perform other related duties as required and directed by leadership to manufacture concrete products About You We Require: • 1 plus years of experience working in a Concrete Plant, • Understand and apply basic mathematical skills (adding, subtracting, division, multiplication), • Knowledge of basic measurements and how to read a tape measure, • Must be able to use extreme caution when working around cranes, trucks, forklifts and other equipment, • Commitment to customer satisfaction, first time quality and efficiency About Us: As you explore the career opportunities at Rinker, you'll discover a wide range of positions. We're always on the lookout for passionate individuals who are committed to Excellence and share our vision of a better future. If you're ready to take the next step in your career and contribute to some of the most exciting infrastructure projects, we invite you to explore our current job openings and start your journey with us. Let's build a better future together. Ready to Apply? · The process is simple. Click on the “apply” button to get started. #RINK #ZRR

Job Description Dura-Line is hiring for a Line Operator in Lubbock, TX! About Orbia Connectivity Solutions Dura-Line: Join Dura‑Line, an Orbia Connectivity Solutions business, where we create solutions that connect people and information across the globe. As a leading global manufacturer of conduit products and accessories, Dura‑Line creates the pathways that power connectivity across a wide range of markets worldwide. Quality, safety, and sustainability are at the core of everything we do, with environmentally responsible practices embedded throughout our manufacturing processes. Be part of our shared mission with Orbia to Advance Life Around the World. The Line Operator is responsible for physically operating an extrusion line in a way that ensures all products are produced free from cosmetic and physical defects and are within manufacturing tolerances. The Line Operator is responsible for the quality of the product run and adjusts and documents operating conditions to produce the highest attainable quality of pipe in a safe and efficient manner. Key Responsibilities: Perform checks of equipment, materials, and product; monitor extruders. Adjust the extruder, die, water, and vacuum to maintain product quality. Ensure the pipe print line is applied according to the Quality Manual. Ensure product dimensions, tolerances, and appearance meet quality standards and inform the Supervisor or Lead of any changes. Perform SDR and size changes, setup, and changeover activities. Document product dimensions accurately. Correct output, quality, speed, and tooling changes as needed. Coordinate changes with other extrusion line operators. Report unsafe or broken equipment. Participate in training, safety, and continuous improvement activities. Requirements: High School diploma preferred. Basic math/measurement & reading comprehension skills At least 1 year of equipment or machine operation experience in a manufacturing environment. Ability to use measuring devices and hand tools. Ability to follow work instructions and use basic math. Material handling and forklift experience. Physical Requirements: Ability to move around obstacles and wear required PPE. Ability to stand and walk for 8-12 hours. Ability to lift and move up to 50 lbs. Ability to climb, reach, squat, and bend. Ability to work in environments with temperature variation and noise. Perks of Joining Our Team ✅ Medical, Dental, and Vision Insurance Benefits Starting Day One!! ✅ Strong 401(k): up to 6% company match, + automatic 3% company contribution ✅ Quarterly Performance, Referral Bonus, Sign On Bonus, and/or other rewards if appliable!! ✅ Generous Paid PTO, Sick Time & Parental Leave!! ✅ Company-Paid Insurance Coverage!! ✅ Career Growth & Wellness Support!! ✅ Tuition, Fitness, Safety Boots & Safety Glasses Reimbursement!! Our Offer: The compensation for this position is typically start at $21/Hour. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, USA 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, education reimbursement, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. JOIN OUR GROWING TEAM TODAY! As part of Orbia Connectivity Solutions, Dura-Line offers an exciting work environment and career opportunities in a continuously growing company. We are committed to attracting, developing, and retaining a diverse workforce that reflects our global customer base. Acquisition based on this vacancy is not appreciated and unsolicited applications from third parties will not be accepted. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Orbia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Description Dura-Line is hiring for a Downstream Production Operator in Lubbock, TX! About Orbia Connectivity Solutions Dura-Line: Join Dura‑Line, an Orbia Connectivity Solutions business, where we create solutions that connect people and information across the globe. As a leading global manufacturer of conduit products and accessories, Dura‑Line creates the pathways that power connectivity across a wide range of markets worldwide. Quality, safety, and sustainability are at the core of everything we do, with environmentally responsible practices embedded throughout our manufacturing processes. Be part of our shared mission with Orbia to Advance Life Around the World. Key Responsibilities: Use tools and measuring devices to ensure the final product meets specifications and to catch abnormalities. Collaborate with team members so orders are wound onto reels correctly. Ensure neat wraps on reels. Cut, tie off, and cap conduit when reels or cable are complete. Monitor print and footage, and make corrections as needed. Perform checks for product and packaging requirements. Complete paperwork for inventory transactions. Assist the Line Operator during start-ups and support operators with cutting, tie-offs, and reel changes. Participate in training, safety, and continuous improvement activities. Report unsafe conditions and broken equipment. Requirements: High school education preferred. Basic math/measurement & reading comprehension skills At least 6 months of equipment or machine operation experience in a manufacturing environment. Ability to maintain safety, quality, and attention to detail in repetitive activities. Experience using measuring devices and hand tools. Ability to follow work instructions and use basic math. Material handling or forklift experience preferred. Physical requirements include moving around obstacles, wearing PPE, standing and walking for 12 hours, working around hot machinery, weather, and noise, and lifting, pushing, or pulling up to 50 lbs. Perks of Joining Our Team ✅ Medical, Dental, and Vision Insurance Benefits Starting Day One!! ✅ Strong 401(k): up to 6% company match, + automatic 3% company contribution ✅ Quarterly Performance, Referral Bonus, Sign On Bonus, and/or other rewards if appliable!! ✅ Generous Paid PTO, Sick Time & Parental Leave!! ✅ Company-Paid Insurance Coverage!! ✅ Career Growth & Wellness Support!! ✅ Tuition, Fitness, Safety Boots & Safety Glasses Reimbursement!! Our Offer: The compensation for this position is typically start at $19/Hour. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, USA 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, education reimbursement, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. JOIN OUR GROWING TEAM TODAY! As part of Orbia Connectivity Solutions, Dura-Line offers an exciting work environment and career opportunities in a continuously growing company. We are committed to attracting, developing, and retaining a diverse workforce that reflects our global customer base. Acquisition based on this vacancy is not appreciated and unsolicited applications from third parties will not be accepted. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Orbia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Description Dura-Line is hiring for a Line Operator in Lubbock, TX We are starting up a new site based in Lubbock, TX and are currently recruiting for qualified candidates for both our Day and Night shift. About Orbia Connectivity Solutions Dura-Line: Join Dura‑Line, an Orbia Connectivity Solutions business, where we create solutions that connect people and information across the globe. As a leading global manufacturer of conduit products and accessories, Dura‑Line creates the pathways that power connectivity across a wide range of markets worldwide. Quality, safety, and sustainability are at the core of everything we do, with environmentally responsible practices embedded throughout our manufacturing processes. Be part of our shared mission with Orbia to Advance Life Around the World. The Line Operator is responsible for physically operating an extrusion line in a way that ensures all products are produced free from cosmetic and physical defects and are within manufacturing tolerances. The Line Operator is responsible for the quality of the product run and adjusts and documents operating conditions to produce the highest attainable quality of pipe in a safe and efficient manner. Shift Details: We are currently hiring for both Day & Night shift Phase 1: During our initial startup the site will be operating 24/5, Monday - Friday Phase 2: Before the end of the year, once lines are commissioned, we will transition to a 24/7 schedule that will work either 6:45am-7pm or 6:45pm-7am on a 2-2-3 schedule ROTATING SCHEDULE WEEK 1 - MON/TUE, FRI/SAT WEEK 2 - SUN, WED/THUR Only Work 15 days a month!!!! Every Other Weekend is a 3 DAY WEEKEND !!!! Key Responsibilities: Perform checks of equipment, materials, and product; monitor extruders. Adjust the extruder, die, water, and vacuum to maintain product quality. Ensure the pipe print line is applied according to the Quality Manual. Ensure product dimensions, tolerances, and appearance meet quality standards and inform the Supervisor or Lead of any changes. Perform SDR and size changes, setup, and changeover activities. Document product dimensions accurately. Correct output, quality, speed, and tooling changes as needed. Coordinate changes with other extrusion line operators. Report unsafe or broken equipment. Participate in training, safety, and continuous improvement activities. Requirements: High School diploma preferred. Basic math/measurement & reading comprehension skills At least 1 year of equipment or machine operation experience in a manufacturing environment. Ability to use measuring devices and hand tools. Ability to follow work instructions and use basic math. Material handling and forklift experience. Physical Requirements: Ability to move around obstacles and wear required PPE. Ability to stand and walk for 8-12 hours. Ability to lift and move up to 50 lbs. Ability to climb, reach, squat, and bend. Ability to work in environments with temperature variation and noise. Perks of Joining Our Team ✅ Medical, Dental, and Vision Insurance Benefits Starting Day One!! ✅ Strong 401(k): up to 6% company match, + automatic 3% company contribution ✅ Quarterly Performance, Referral Bonus, Sign On Bonus, and/or other rewards if applicable!! ✅ Generous Paid PTO, Sick Time & Parental Leave!! ✅ Company-Paid Insurance Coverage!! ✅ Career Growth & Wellness Support!! ✅ Tuition, Fitness, Safety Boots & Safety Glasses Reimbursement!! Our Offer: The compensation for this position is typically start at $21/Hour. The actual base pay offered to the successful candidate will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. The compensation package may also include short and long-term incentive compensation. We offer a comprehensive benefits package that includes healthcare coverage, USA 401(k) retirement savings plan, paid company holidays, paid vacation time, paid sick time, parental leave, short- and long-term disability leave, education reimbursement, and an employee assistance program. At Orbia, we are committed to taking care of our employees and believe in providing comprehensive support so you can thrive at work and home. JOIN OUR GROWING TEAM TODAY! As part of Orbia Connectivity Solutions, Dura-Line offers an exciting work environment and career opportunities in a continuously growing company. We are committed to attracting, developing, and retaining a diverse workforce that reflects our global customer base. Acquisition based on this vacancy is not appreciated and unsolicited applications from third parties will not be accepted. All employees are subject to pre-employment Background Check and Drug Screening and employment is contingent upon successful clearance of both. Orbia is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Job Description POSITION SUMMARY Machine Operator II is responsible for operating machinery and involves basic tasks related to machine operation and production support. Machine Operator II works under close supervision and follows established procedures to ensure the efficient and safe operation of equipment. Role and Responsibilities • Ability to start and stop the machine safely without supervision., • Control and adjust machine settings (e.g. speed), • Ability to place raw material or unfinished parts and remove finished parts from machine safely., • Monitor machine operation., • Check part quality with designated measurement instruments., • Understand when and how to stop machine safely., • Perform basic maintenance tasks on machinery, such as cleaning and lubrication., • Operate tools and machinery to aid the manufacturing process., • Perform periodic checks on equipment and troubleshoot issues as they arise., • Oversee the machine while executing tasks and make necessary adjustments to improve results., • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager., • Record all machine actions and log completed parts for record keeping., • Keep a clean and orderly work area., • Perform other duties that may be assigned by the Plant Manager., • Read and understand drawings, • Ability to change machine Setting to accommodate different sizes and dimensions, • Must have a further understanding of thread dimensions and thread terminology, • Ability to guide Machine Operator I with ongoing obstacles, • Understand Custom Pipe part number conventionQualifications and Education Requirements, • High school diploma or equivalent. Adequate work experience may be substituted in lieu of a diploma or GED., • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time., • Basic mechanical aptitude and ability to learn new tasks quickly., • Strong attention to detail and quality orientation., • Ability to work effectively in a team environment., • Ability to read, write and communicate effectively., • Willingness to follow safety protocols and procedures (e.g. constant use of Personal Protective Equipment (PPE))., • Perform each essential duty satisfactorily.Preferred Skills, • Previous machine operating experience in a manufacturing facility., • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC’s, and other mechanical machinery., • Willingness to work on occasional rotating shifts that may include early or late hours, weekends, or overtime if necessary., • Ability to read, write and speak in English Physical • Ability to lift up to 50 lbs,, • Bend, stoop, and stand or walk for long periods of time. Custom Pipe and Fabrication is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status. In addition to federal law requirements, Custom Pipe and Fabrication complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Custom Pipe and Fabrication expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Job Description POSITION SUMMARY Machine Operator III is responsible for operating machinery. Machine Operator III involves basic tasks related to machine operation and production support. Machine Operator III work under close supervision and follows established procedures to ensure the efficient and safe operation of equipment. ROLE AND RESPONSIBILITIES • Ability to start and stop the machine safely without supervision., • Control and adjust machine settings (e.g. speed), • Ability to place raw material or unfinished parts and remove finished parts from machine safely., • Monitor machine operation., • Check part quality with designated measurement instruments., • Understand when and how to stop machine safely., • Perform basic maintenance tasks on machinery, such as cleaning and lubrication., • Operate tools and machinery to aid the manufacturing process., • Perform periodic checks on equipment and troubleshoot issues as they arise., • Oversee the machine while executing tasks and make necessary adjustments to improve results., • Produce quality parts according to manufacturing targets and schedules as directed by the Plant Manager., • Record all machine actions and log completed parts for record keeping., • Keep a clean and orderly work area., • Perform other duties that may be assigned by the Plant Manager., • Read and understand drawings, • Ability to change machine Setting to accommodate different sizes and dimensions, • Must have a further understanding of thread dimensions and thread terminology, • Ability to guide Machine Operator I with ongoing obstacles, • Understand Custom Pipe part number convention??, • Program CNC Machines, • Mentor, support and train Machine Operator II’s QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or equivalent. Adequate work experience may be substituted in lieu of a diploma or GED., • Willingness to follow written or oral work instructions and perform repetitive tasks for extended periods of time., • Basic mechanical aptitude and ability to learn new tasks quickly., • Strong attention to detail and quality orientation., • Ability to work effectively in a team environment., • Ability to read, write and communicate effectively., • Willingness to follow safety protocols and procedures (e.g. constant use of Personal Protective Equipment (PPE))., • Perform each essential duty satisfactorily. PREFERRED SKILLS • Previous machine operating experience in a manufacturing facility., • Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC’s, and other mechanical machinery., • Willingness to work on occasional rotating shifts that may include early or late hours, weekends, or overtime if necessary., • Ability to read, write and speak in English Physical • Ability to lift up to 50 lbs,, • to bend, and to stand or walk for long periods of time. Custom Pipe and Fabrication is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status. In addition to federal law requirements, Custom Pipe and Fabrication complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Custom Pipe and Fabrication expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status.

Machine Operator II is responsible for operating machinery and involves basic tasks related to machine operation and production support. Familiarity of various manufacturing tools and machinery including but not limited to facers, lathes, CNC's, and other mechanical machinery. Ability to guide Machi

Filler OperatorOperate filler equipment of various product families following regulatory standards. Job Duties And Responsibilities:Clean, set-up, operate, and monitor equipment of the production lineComplete all required documentation and scheduled quality checksMonitor weights, seals, caps, and ge

Machine Operator III involves basic tasks related to machine operation and production support.

Dairy Farmers of America - - Responsibilities: Operate and monitor filler equipment on production line; Clean, set-up, and prepare line for run; Complete quality checks and documentation; Troubleshoot basic to moderate line issues; Perform line changeovers and prepare next run.

Machine OperatorLubbock, TXOverviewThis is an amazing opportunity for meticulous individuals to enjoy a dynamic work environment with multiple machines.

We are looking for a Heavy Duty Towing Operator to join our growing team! An ideal operator is someone who likes being active, is a creative problem solver, communicates well in a team environment, and has excellent customer service skills. This is not a desk job. Having an interest in automobile knowledge is a must, as no two situations are the same and you'll need to make quick decisions under pressure. Tow Truck Operators keep our highways safe and are classified as First Responders. Come join the team and be an important part of your community! Essential Duties and Responsibilities include: • Respond to calls dispatched to you in a safe, timely manner. Provide roadside assistance in a safe, professional manner that is free of accidents, injuries and damage., • Communicate with dispatch in a professional, informative manner as it relates to information necessary to document your status in servicing a call as well as accurate ETA's when requested., • Professionally and safely perform emergency road service duties as may be dispatched to you, such as, but not necessarily limited to:, • Perform damage free towing, • Perform minor roadside repairs, excluding highways, • Perform roadside towing of heavy duty vehicles such as, • 18-wheelers, • Garbage Trucks, • Dump Trucks, • Cement Trucks, • Perform accident towing and scene clean-up, • Daily inspects the truck for safety, organization and related equipment, tools, rigging inventory, • Complete and turn in pre-shift inspection prior to beginning duty each day, • Immediately reports tools or equipment damaged or missing;, • Safe driving behavior is a must. Obey all traffic laws, drive defensively, always wear your seat belt, remember our 4-second following rule, minimize backing and left turns., • Trucks are kept clean inside and out; maintains the truck(s) fuel tanks half full at all times; Maintains truck fluid levels according to manufacturer standards and notes quantities added on the pre-shift inspection sheet., • Maintains the storage yard in a safe, clean and orderly manner. Ensures that all trash must be properly disposed of and not left in the truck or on the ground. Secures the storage yard when leaving., • All other duties as assigned by Supervisor Requirements • Candidate must reside near their assigned area in order to meet customer service time requirements, • Ability to successfully pass DOT medical exam, • Current and valid driver's license with a clean driving record, • All required state-based licensure, • Class A Commercial Driver's License (CDL) no automatics only please, • This position requires the ability to bend, stoop, walk and stand for periods of time in all types of weather, • Willing to take a drug test and background check, • Confident and capable to drive in inclement weather, • Proficient in utilizing mobile and computer applications for completing administrative work, • Proficient in paper-based administrative work, • Experience, • 1 year experience operating a Heavy Duty Tow Truck OR 1 year experience hauling equipment via Semi-trailer Truck preferred, • Heavy Equipment or Machine Operation skills a plus Offers of employment are contingent upon the results of successfully passing a background screening including a criminal background check, a review of motor vehicle records, social security screening, and a drug and alcohol test as required by law.

The Forklift Operator is responsible for the operation of forklifts to move materials around a work site.Their duties include preparing merchandise and securing it for safe, easy transport, using radio communications to determine priorities and performing regular machine maintenance on forklifts and

Job DescriptionDescription: No experience required. Only a Driver’s License needed. We will train you! We are looking for quality towing operators to join our growing team. An ideal operator is someone who likes being active, is a creative problem solver, communicates well in a team environment, and has excellent customer service skills. This is not a desk job. Having an interest in automobile knowledge is a must, as no two situations are the same and you’ll need to make quick decisions under pressure. Tow Truck Operators keep our highways safe and are classified as First Responders. Come join the team and be an important part of your community! Essential Duties and Responsibilities include: • Respond to calls dispatched to you in a safe, timely manner. Provide roadside assistance in a safe, professional manner that is free of accidents, injuries and damage., • Communicate with dispatch in a professional, informative manner as it relates to information necessary to document your status in servicing a call as well as accurate ETA's when requested., • Professionally and safely perform emergency road service duties as may be dispatched to you, such as, but not necessarily limited to:, • Perform damage free towing, • Perform accident towing and scene clean-up, • Daily inspects the truck for safety, organization and related equipment, tools, rigging inventory, • Complete and turn in pre-shift inspection prior to beginning duty each day, • Immediately reports tools or equipment damaged or missing;, • Safe driving behavior is a must. Obey all traffic laws, drive defensively, always wear your seat belt, remember our 4-second following rule, minimize backing and left turns., • Trucks are kept clean inside and out; maintains the truck(s) fuel tanks half full at all times; Maintains truck fluid levels according to manufacturer standards and notes quantities added on the pre-shift inspection sheet., • Maintains the storage yard in a safe, clean and orderly manner. Ensures that all trash must be properly disposed of and not left in the truck or on the ground. Secures the storage yard when leaving., • All other duties as assigned by Supervisor Requirements: • Candidate must reside near their assigned location in order to meet customer service time requirements, • Ability to successfully pass DOT medical exam, • Current and valid driver’s license with a clean driving record, • This position requires the ability to bend, stoop, walk and stand for periods of time in all types of weather, • CDL a plus, but not required, • Willing to take a drug test and background check, • Confident and capable to drive in inclement weather, • Proficient in utilizing mobile and computer applications for completing administrative work, • Proficient in paper-based administrative work, • No prior experience necessary, training is provided, • Heavy Equipment or Machine Operation skills a plus Offers of employment are contingent upon the results of successfully passing a background screening including a criminal background check, a review of motor vehicle records, social security screening, and a drug and alcohol test as required by law or company policy.

Snelling - - Responsibilities: Set up and operate automated trim/fabrication machinery; Use computerized machine controls and touchscreen interfaces to generate and modify parts; Read work orders, cut lists, measurements, and production specifications; Adjust machine settings to meet production requ

Job DescriptionDescription: We are looking for a Heavy Duty Towing Operator to join our growing team! An ideal operator is someone who likes being active, is a creative problem solver, communicates well in a team environment, and has excellent customer service skills. This is not a desk job. Having an interest in automobile knowledge is a must, as no two situations are the same and you’ll need to make quick decisions under pressure. Tow Truck Operators keep our highways safe and are classified as First Responders. Come join the team and be an important part of your community! Essential Duties and Responsibilities include: • Respond to calls dispatched to you in a safe, timely manner. Provide roadside assistance in a safe, professional manner that is free of accidents, injuries and damage., • Communicate with dispatch in a professional, informative manner as it relates to information necessary to document your status in servicing a call as well as accurate ETA's when requested., • Professionally and safely perform emergency road service duties as may be dispatched to you, such as, but not necessarily limited to:, • Perform damage free towing, • Perform minor roadside repairs, excluding highways, • Perform roadside towing of heavy duty vehicles such as, • 18-wheelers, • Garbage Trucks, • Dump Trucks, • Cement Trucks, • Perform accident towing and scene clean-up, • Daily inspects the truck for safety, organization and related equipment, tools, rigging inventory, • Complete and turn in pre-shift inspection prior to beginning duty each day, • Immediately reports tools or equipment damaged or missing;, • Safe driving behavior is a must. Obey all traffic laws, drive defensively, always wear your seat belt, remember our 4-second following rule, minimize backing and left turns., • Trucks are kept clean inside and out; maintains the truck(s) fuel tanks half full at all times; Maintains truck fluid levels according to manufacturer standards and notes quantities added on the pre-shift inspection sheet., • Maintains the storage yard in a safe, clean and orderly manner. Ensures that all trash must be properly disposed of and not left in the truck or on the ground. Secures the storage yard when leaving., • All other duties as assigned by Supervisor Requirements: • Candidate must reside near their assigned area in order to meet customer service time requirements, • Ability to successfully pass DOT medical exam, • Current and valid driver’s license with a clean driving record, • All required state-based licensure, • Class A Commercial Driver’s License (CDL) no automatics only please, • This position requires the ability to bend, stoop, walk and stand for periods of time in all types of weather, • Willing to take a drug test and background check, • Confident and capable to drive in inclement weather, • Proficient in utilizing mobile and computer applications for completing administrative work, • Proficient in paper-based administrative work, • Experience, • 1 year experience operating a Heavy Duty Tow Truck OR 1 year experience hauling equipment via Semi-trailer Truck preferred, • Heavy Equipment or Machine Operation skills a plus Offers of employment are contingent upon the results of successfully passing a background screening including a criminal background check, a review of motor vehicle records, social security screening, and a drug and alcohol test as required by law.

A Day in the Life: As a Machine Operator, you'll play a vital role in ensuring our warehouse and production operations run efficiently, safely, and smoothly.

Machine Operator VMachine Operator V is responsible for operating machinery in Lubbock, TX.Machine Operator V involves basic tasks related to machine operation and production support.Machine Operator V works under supervision and follows established procedures to ensure the efficient and safe operat

Job Description Current Manufacturing Manager is retiring: SUMMARY Coordinate, plan and manage all manufacturing/production processes and personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply.) ? Ensure that all manufactured components are produced efficiently, and are consistent with company established goals for quality and customer order on-time performance. ? Manage company assets to support completion of pre-set production schedules cost effectively. ? Monitor and report shop labor efficiencies. ? Coordinate, recommend, and manage improvements to reduce costs, increase efficiencies, and sustain those improvements. ? Ensure quality standards and processes are used throughout manufacturing. Work constantly with Quality Assurance on continuous improvements and provide preventative and correction actions when problems occur. ? Responsible for all MRO, tooling, and manufacturing supply procurement. ? Track competencies of subordinates and provide leadership, development, and training as required. ? Manage all equipment preventative maintenance activities and requirements to required intervals. ? Ensure safety guidelines are being met to assure a safe work environment. Coordinate periodic safety meetings to improve safety awareness. ? Attend monthly staff meetings and provide input regarding required department measurements. SUPERVISORY RESPONSIBILITIES Manufacturing Supervisor(s), CNC Machinist(s), Manual Machinist(s), Saw Operator, Balancer, other Manufacturing Staff and Maintenance Employees. QUALIFICATIONS ? To perform this job satisfactorily, an individual must be able to perform each essential duty satisfactorily. ? Must be able to convey information effectively in writing, presentations or speeches to other employees. ? Strong, ambitious, motivated team player, with attention to detail and concern of importance. Ability to manage multiple projects with minimum direction. ? Strong computer skills including Microsoft Office Outlook, Excel, etc. ? Strong time management skills required. ? Excellent conceptual skills. . ? Knowledge of FANUC and MAZATROL lathe and mill controls is essential. ? Must be proficient in programming (MasterCAM preferred) and troubleshooting G-code programming language. EDUCATION and/or EXPERIENCE ? Associates degree or greater preferred. ? Minimum of 5 years work experience in a machined component manufacturing environment. ? Experience with and in a Lean manufacturing environment preferred. ? Supervision and management experience of a minimum of 2 years in a medium to large machine shop environment. LANGUAGE SKILLS Ability to effectively interpret and translate instructions to other employees in a professional and respectful manner. Effectively communicate with clients and fellow employees both verbally and written in the English language. Must be able to write in a professional/business manner. MATHEMATICAL SKILLS Ability to perform basic and complex geometric mathematical computations. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical and/or complex situations. Has the ability to read and interpret basic dimensions on blueprints. Ability to implement, understand, and execute departmental budgetary needs. REASONING ABILITY Ability to define problems, collect data, establish facts and draw valid conclusions using logic to weigh the strengths and weaknesses of alternate solutions. Must have excellent organizational, multi-tasking and prioritizing skills. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Excellent organizational, multi tasking and prioritizing skills. Communicate honestly with all customers and provide solutions to problems in a timely fashion. PHYSICAL DEMANDS Ability to move or transfer products with an overhead crane. Ability to lift 50 lbs. when required. While performing the duties of the job, the employee is regularly required to stand for at least four hours at a time, walk throughout buildings and reach with hands and arms at floor, waist and shoulder level. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. MENTAL WORK DEMANDS Regular and on-time attendance. Full time position, hours regularly exceed 40 hours per week. Occasional travel by conventional means including aircraft and motor vehicle. WORK ENVIRONMENT The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate to high. #ZR

Job Description SUMMARYCoordinate, plan and manage all manufacturing/production processes and personnel. ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following; however, other duties may apply.)Ensure that all manufactured components are produced efficiently, and are consistent with the company's established goals for quality and customer order on-time performance. Manage company assets to support the completion of pre-set production schedules cost-effectively.Monitor and report shop labor efficiencies.Coordinate, recommend, and manage improvements to reduce costs, increase efficiencies, and sustain those improvements. Ensure quality standards and processes are used throughout manufacturing. Work constantly with Quality Assurance on continuous improvements and provide preventative and corrective actions when problems occur. Responsible for all MRO, tooling, and manufacturing supply procurement.Track competencies of subordinates and provide leadership, development, and training as required.Manage all equipment preventative maintenance activities and requirements to required intervals. Ensure safety guidelines are being met to assure a safe work environment. Coordinate periodic safety meetings to improve safety awareness. Attend monthly staff meetings and provide input regarding required department measurements. SUPERVISORY RESPONSIBILITIESManufacturing Supervisor(s), CNC Machinist(s), Manual Machinist(s), Saw Operator, Balancer, Laser Operator(s), Welder(s), and other Manufacturing Staff, and Maintenance Employees. QUALIFICATIONSTo perform this job satisfactorily, an individual must be able to perform each essential duty satisfactorily. Must be able to convey information effectively in writing, presentations, or speeches to other employees.Strong, ambitious, motivated team player, with attention to detail and concern for importance. Ability to manage multiple projects with minimal direction. Strong computer skills, including Microsoft Office Outlook, Excel, etc. Strong time management skills required. Excellent conceptual skills.Knowledge of FANUC and MAZATROL lathe and mill controls is essential. Must be proficient in programming (MasterCAM preferred) and troubleshooting G-code programming language. EDUCATION and/or EXPERIENCEAssociate's degree or greater preferred. Minimum of 5 years of work experience in a machined component manufacturing environment. Experience with and in a Lean manufacturing environment preferred. Supervision and management experience of a minimum of 2 years in a medium to large machine shop environment.Employee/applicants who receive offers of employment will be tested for controlled substances as a pre-condition for employment. The sample collection and testing will be for controlled substances. A positive test result for controlled substances will render an applicant disqualified for employment. Negative and positive results will be reported to CSJB Holdings, Inc. If the results are positive, the controlled substance will be identified. The results will not be released to any other parties without an applicant's written authorization. CSJB Holdings, Inc. will investigate applicants background and qualifications for purposes of evaluating whether an applicant is qualified for the position for which they are applying. CSJB Holdings, Inc. will utilize an outside firm or firms to assist it in checking such information, and applicants specifically authorize such an investigation by information services and outside entities of the company's choice. Applicants may withhold their permission and that in such a case, no investigation will be done, and their application for employment will not be processed further.

Crown Holdings - - Responsibilities: Operate production line equipment and ensure cans meet specs; Perform basic machine maintenance and lubrication; Inspect cans for defects to customer specs; Assist forklift/material handling and loading; Maintain housekeeping and complete area paperwork.

Coca-Cola Southwest Beverages - - Responsibilities: Operate industrial vehicles and equipment; Transport raw materials, full goods and/or finished goods to designated area; Load and unload designated trailers and/or route trucks; Ensure compliance with regulatory and company policies and procedures

Airport Terminal Services - 8002 North Birch Avenue - Responsibilities: Facilitate loading/unloading of cargo to/from trucks; Check freight for piece count/weight/dimensions/documents; Operate basic cargo handling equipment; Maintain inventory of freight and airline equipment; Complete paperwork an

Snelling - - Responsibilities: Assemble components accurately, thoroughly, and quickly to approved specifications; Read blueprints and verify parts required prior to assembly; Double-check connections and record discrepancies; Inform supervisors of part or equipment defects; Communicate with other s

Responsibilities: Load and unload freight; Select and sort inventory; Palletize materials; Audit and repack items; Maintain site cleanup and housekeeping.

Albertsons - 2206 114th Street - Responsibilities: Operate ovens and monitor cook cycles; Verify product specifications; Load and unload racks and pallets; Perform sanitation and HACCP documentation; Train new team members and support supervisor as needed.

Dean - - Responsibilities: Receiving, verifying, and counting stock items and keeping record of the corresponding data; Maintaining documented records of stock usage and stock handling equipment; Storing stock items in an orderly, safe and accessible manner in warehouses; Using internal software sy

O'Reilly Automotive - - Responsibilities: Receive, unload, inspect, sort, stock, pick, pack, stage merchandise; Match item numbers and shipping documents to merchandise; Operate RF scanners, voice-picking, and WMS; Maintain inventory accuracy and reconcile discrepancies; Load/unload trailers and rou

The Job Center - - Responsibilities: Operate a sit-down forklift to move, stage, and transport materials; Pull orders according to production/shipping requirements; Load and unload trucks and production lines; Verify materials and maintain inventory records; Follow safety procedures and keep a clea

O'Reilly Automotive - - Responsibilities: Unload, inspect, sort, stock, pick, pack, and ship merchandise; Maintain inventory accuracy and safety standards; Operate RF scanners, handheld devices, voice-picking, WMS; Process inbound/outbound shipments and returns; Identify unsafe conditions and repor

Crown Holdings - - Responsibilities: Operate forklift to move inventory and load trailers; Monitor equipment and safety procedures; Assist with pallet locating and staging orders; Maintain clean and organized work area; Support quality checks and daily production needs.

Snelling - - Responsibilities: Packaging products for shipment; Loading/unloading/moving materials; Shrink wrapping pallets; Inspecting product quality; Assist with shipping/returns/inventory movement.

Dean - - Responsibilities: Receiving, verifying, and counting stock items.

Snelling - - Responsibilities: Assemble, label, and package display kits and product materials; Rework, clean, and relabel items; Maintain clean work areas and follow safety procedures; Meet production goals with accuracy and consistency; Stand for long periods and perform detail-oriented tasks.

McLane - - Responsibilities: Retrieve and transport product to assigned slots; Identify product for selection, sorting, and placement; Follow aisle specifications for sorting/placement; Enter assigned product into the system; Work safely to prevent injury to people and damage to products and equipm

Snelling - - Responsibilities: Safely operate forklifts and other powered industrial equipment in a warehouse environment; Load, unload, move, stage, and organize products and materials; Pick and retrieve inventory accurately and efficiently; Inspect equipment and report safety or maintenance conce

Imperial Dade - 925 East 66th Street - Responsibilities: Safely operate up to 26' box truck with air brakes; Track and document activity logs; Inspect truck before and after trips; Deliver items to loading area and unload; Assist in warehouse operations and material handling.

Solo Company Driver or Independent Contractor/ Owner Operator or Lease Purchase. Long Haul OTR Reefer- $1000-$1625+ Weekly! Owner Operator- Lease Purchase, Company Drivers.

We're looking for serious owner-operators to partner with and continue to grow as a team.

A leading logistics company in Texas is actively hiring Class A OTR Company Drivers to lease owner-operators.

Diamond Transportation Signing OTR Owner Operators. Signing: OTR Owner Operators (Accepting Independent Contractors W/ Trucks),. Our family owned and operated company has only one concern, YOUR success as an Owner Operator.