Trabajos maintenance electrical en Clifton, New Jersey - Page 2Crear alertas

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Training & development BROAD U.S.A. is a privately held company headquartered in Hackensack, New Jersey. BROAD delivers innovative solutions in three product areas: Absorption chiller and Electrical chiller Air Purification, Filtration and Ventilation systems Modular construction: Holon sustainable modular building system About the role: We are seeking a Building Automation Systems (BMS) Controls Technician to join our growing team. Qualified candidates will work with project managers on designing, specifying, programming and integrating new and existing building management systems. Candidate will also work with technical support & monitoring personnel on ongoing troubleshooting and support. This role is critical to our growing business and ensure our clients achieve energy efficiency and system optimization. Key Responsibilities: Perform necessary software programming, equipment start-up, tuning and calibration, commissioning and integration of HVAC controls, DDC systems and BMS software. Conduct preventative maintenance and respond to emergency service calls on existing BMS systems. Troubleshoot and repair control system installations independently, ensuring performance standards are met. Effectively communicate with customers to evaluate service needs, maintain proper scheduling and ensure high levels of customer satisfaction. Monitor customer buildings to ensure optimum performance standards are being achieved. Be proficient in knowledge of cooling and heating systems. Identify opportunities for additional building enhancements and perform upgrades and/or small-scale retrofits on existing systems. Keep updated with industry developments and building control system, particularly in energy-saving strategies and new technologies. Candidates should anticipate a portion of the time will require travel to customer locations throughout North America. Qualifications: 2+ years of experience in HVAC control systems and/or building automation, including servicing and commissioning electronic controls. Strong knowledge of BMS protocols such as BACnet, Modbus, Lonworks, Tridium/Niagara and experience working with Delta Controls, JCI, and Andover based BMS systems Hands-on experience with system design, integration, and troubleshooting, including both legacy and new systems. Familiarity with mechanical and electrical systems as part of construction and building automation system. Ability to work on-site, including in confined spaces, on ladders, and with equipment weighing up to 50 lbs. Competency in Microsoft Word, Excel, and AutoCAD for creating and managing project documentation. Preferred Experience working with systems from Delta Controls, JCI, Andover, and Tridium. Strong organizational, communication, and problem-solving skills. Ability to manage customer relations and work effectively in a team to meet project deadlines. Performing other duties as assigned by Project Manager Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related fields is a plus. Benefits: Competitive salary is based on experience 401(k) plan with company match Comprehensive health insurance (Medical, Dental, Vision, Life) Paid Time Off and company holidays BROAD is an equal opportunity employer

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician IV Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Please note that this opening is specifically for our NY2 Night shift. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outagesManage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer) 1. Cage Build-Outs 2. Overhead Installations 3. Rack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8Guiding Principles. Requirements Knowledge, Skills & Abilities: Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check including criminal history, professional references, and employment and education verification. Physical Demands and Special Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Posting Timeline: This role is anticipated to be posted through September 4, 2025. Compensation: Compensation for this role includes a base salary between $41.94 - $46.64 hourly, as well as performance-based commission and equity. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 4-panel drug test conducted after the offer letter is signed, which will screen for opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Summary: The Apprentice Moldmaker is responsible for learning various mold-making operations including precision milling, grinding, sinker EDM, wire EDM, assembly, and troubleshooting of high precision injection molds. Essential Duties and Responsibilities: • Proactive team member working directly with experienced mold makers, • Safely operate all types of toolroom equipment required to manufacture mold components, • Troubleshoot and repair plastic injection molds., • Maintain the organization of the mold shop. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem-solving situations; Uses reason even when dealing with emotional topics. Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others. Interpersonal - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions Team Work - Balances team and individual responsibilities; Exhibits objectivity and openness to others' views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Able to build morale and group commitments to goals and objectives; Supports everyone's efforts to succeed; Recognizes accomplishments of other team members. Written Communication - Writes clearly and informatively; Edits work for spelling and grammar; Varies writing style to meet needs; Presents numerical data effectively; Able to read and interpret written information. Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values. Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time; Supports organization's goals and values; Benefits organization through outside activities; Supports affirmative action and respects diversity. Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; Commits to long hours of work when necessary to reach goals; Completes tasks on time or notifies appropriate person with an alternate plan. Initiative - Volunteers readily; Undertakes self-development activities; Seeks increased responsibilities; Takes independent actions and calculated risks; Looks for and takes advantage of opportunities; Asks for and offers help when needed. Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions. Motivation - Sets and achieves challenging goals; Demonstrates persistence and overcomes obstacles; Measures self against standard of excellence; Takes calculated risks to accomplish goals. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in a timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below represent the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High School Diploma or equivalent. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra, trigonometry, and geometry. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Microsoft Windows/Office, Mastercam, Solidworks Certificates and Licenses: No certifications needed Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is occasionally exposed to work near moving mechanical parts; fumes or airborne particles, and the risk of electrical shock. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include Close vision, Distance vision, and Peripheral vision., • While performing the duties of this job, the employee is occasionally required to stand, walk, sit, use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch, or crawl, and talk or hear. Company DescriptionOur company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition. What makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.Our company is a leader in the manufacturing industry, specializing in high-quality products with a focus on precision, innovation, and sustainability. We take pride in our state-of-the-art facilities and advanced manufacturing techniques, including cutting-edge injection molding processes that set us apart from the competition.\r\n\r\nWhat makes us a great place to work? We believe in investing in our employees by offering continuous training and professional development opportunities. Our team-oriented culture fosters collaboration and creativity, and we prioritize safety and well-being in every aspect of our operations. With competitive pay, benefits, and a clear path for career advancement, we provide an environment where your hard work and ideas are valued. At our company, you won’t just have a job—you’ll have the opportunity to build a fulfilling career.

Job DescriptionDescription: Department: Engineering Reports To: General Manager / Chief Engineer Status: Non-Exempt Job Summary The Preventative Maintenance Engineer is responsible for ensuring that all hotel systems, equipment, and guest rooms are maintained in excellent working order through proactive and scheduled maintenance. This position plays a key role in minimizing downtime, improving guest satisfaction, and maintaining compliance with brand and safety standards. The Preventative Maintenance Engineer will execute daily, weekly, and monthly maintenance programs, complete room and system inspections, and document all findings and repairs. The role also includes responding to guest maintenance requests, assisting with minor repairs, and supporting the Chief Engineer in maintaining the overall facility in top operational condition. Qualification Standards Education & Experience • High school diploma or equivalent required., • Minimum 2 years of general maintenance or engineering experience; hotel experience strongly preferred., • Trade license or certification (HVAC, electrical, plumbing, or carpentry) preferred., • Valid driver’s license required with acceptable driving record. Physical Requirements • Long hours may be required., • Must be able to exert up to 100 pounds of force occasionally, 50 pounds frequently, and 20 pounds constantly., • Ability to stand, walk, climb, kneel, and work in tight spaces throughout the shift. Mental Requirements • Must be detail-oriented, organized, and able to follow preventative maintenance schedules precisely., • Must be effective in problem-solving, anticipating and preventing issues before they impact the guest experience., • Must remain calm and professional under pressure., • Strong communication and documentation skills required.Requirements: Duties & Responsibilities Essential Functions • Conduct scheduled preventative maintenance for guest rooms, public spaces, and building systems in accordance with Avion Hospitality and Hyatt Place standards., • Inspect and maintain HVAC, electrical, plumbing, laundry, kitchen, and pool equipment to ensure proper operation., • Complete assigned PM checklists for guestrooms, including minor repairs such as caulking, touch-up paint, fixture adjustments, furniture maintenance, and appliance testing., • Maintain accurate maintenance logs, inspection records, and work order documentation., • Identify and report potential safety hazards or maintenance deficiencies; assist in correcting issues promptly., • Respond to guest service requests and work orders quickly and courteously to minimize inconvenience., • Monitor and record chemical levels and operational status of pool and spa to ensure compliance with health codes., • Assist in maintaining compliance with fire safety, energy conservation, and OSHA standards., • Participate in hotel safety meetings and training sessions as required., • Ensure all work is performed safely, efficiently, and to brand quality standards. Additional Responsibilities • Support property inspections and quality assurance audits., • Assist with snow removal, landscaping, and exterior maintenance as needed., • Maintain tool inventory and ensure proper use of equipment., • Proactive Problem Solving: Anticipates maintenance needs before breakdowns occur., • Guest Focus: Ensures all work supports the comfort, safety, and satisfaction of hotel guests., • Reliability: Consistently follows schedules, checklists, and reporting procedures.

Job DescriptionFamily owed Medium-Heavy Duty Truck Repair Company currently seeking a Class A or B Diesel Technician to become an integral part of our team! You will diagnose and repair Medium and Heavy Duty Diesel engine vehicles of all makes and models and their systems. If you are seeking a career in an organization that offers growth and treats people with respect, Apply today! Responsibilities: • Diagnose and repair various makes/models of diesel engines and transmissions as well as chassis and body control systems, • Perform routine vehicle inspections and maintenance, • Inspect and test vehicles for necessary adjustments, • Help other technicians with jobs as needed, • Minimum 10 year previous experience as a diesel technician, • Knowledge of diagnostic software and equipment, • Knowledge of Diesel engine vehicle and components, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • A valid driver's license with clean driving record. CDL is a Plus!, • Excellent people skills and a professional appearance, • Excellent organizational and time management skills, • Competitive Base Salary w/ Monthly Bonuses, • Comprehensive Health Benefits including Dental Coverage, • Paid Holiday and Vacation Program, • 401K Plan, • Growth and Career Opportunities

Job DescriptionDescription: Hawks, a leader in HVAC, is seeking a qualified Controls Tech to join our team! If you are seeking a role that combines your technical skills and a desire to provide the highest quality of customer satisfaction, then this may be a good fit for you. Job Responsibilities • Perform system design, preventative maintenance, repair, installation and commissioning of Direct Digital Control (DDC) Systems., • Trouble shoot issues that arise during service visits and repair as needed., • Assist with startup, commission and re-commission of customer systems that utilize electrical/electronic technology, • Provide exemplary service to clients, • Respond to emergency calls in a timely manner, • Collaborate with customers on diagnostics and repair of complex systems malfunctions requiring knowledge of a variety of electronic or digital controls systems, • Meets regularly with customer to become familiar with operating problems., • Adheres to all Hawks and customer safety standards, • Participates in training classes as assigned and conducts extensive self-study to develop technical proficiency in the company's product lines., • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance, • Must have and maintain a valid driver's license in good standing., • Basic understanding of control logic, • experience troubleshooting DDC systems., • Must be service oriented and willing to work effectively with customers' on-site staff, • Prior experience in HVAC and/or Building Automation preferred, • Technical Business School Certificate/Diploma OR post high school training with a minimum of 3+ years' experience., • Strong mechanical mindset and attention to detail., • Ability to use hand/power tools and electrical testing equipment., • Ability to climb ladders in excess of 8 feet above ground level and lifting items up to 50 pounds.

Job Description $3,000 Sign On Bonus Vitan Equipment is looking for an experienced Mobile Mechanic to repair heavy equipment. You’ll service, diagnose, and maintain forklifts and material handling equipment—no two days are the same. Why You’ll Love It Here: • Pay range $21-$33 an hour, based on experience and qualifications, • $3,000 Sign on bonus, • Commission opportunities to boost your earnings, • Company vehicle provided, • No weekends & first shift, • PTO, medical, dental, vision, retirementWhat You’ll Do:, • Diagnose and repair mechanical, electrical, and hydraulic issues, • Perform preventative maintenance to keep equipment in top shape, • Travel to customer sites—variety of work every day, • Ensure equipment is safe and meets standards, • Keep accurate records of work performedWhat You’ll Need:, • 2+ years’ experience in forklift or heavy equipment repair (electric, propane, diesel), • Strong troubleshooting skills, safety focus and customer orientated mindset 4G6o2CiYFG

Job Description This position is located in Weehawken, NJ Pay is commensurate with experience. Must live onsite. About Company: RHO Residential is a premier property management company specializing in Class-A luxury apartment communities, with a primary focus on the New Jersey market. Our comprehensive services include leasing, marketing, financial management, maintenance operations, and resident relations, all tailored to deliver exceptional living experiences. We prioritize a people-first approach, fostering meaningful connections with residents and property owners alike. At RHO Residential, we are dedicated to maintaining high standards of property upkeep, optimizing operational efficiency, and maximizing property value for our partners. With a focus on promoting a positive workplace culture, we ensure our team feels empowered, valued, and inspired to deliver outstanding results. Whether it’s through innovative marketing strategies, proactive maintenance, or seamless communication, we are committed to creating vibrant, thriving communities where people love to live and work. Ready to be part of something exceptional? Join our team at RHO Residential and help us redefine property management with passion, purpose, and people at the heart of everything we do! About the Role: The Maintenance Supervisor at RHO RESIDENTIAL LLC plays a critical role in ensuring the operational excellence and safety of residential properties within the New Jersey area. This position is responsible for overseeing all maintenance activities, coordinating with vendors and contractors, and leading a team of maintenance technicians to deliver timely and high-quality service. The supervisor will implement preventive maintenance programs to minimize downtime and extend the lifespan of building systems and equipment. Additionally, the role requires close collaboration with property management to address tenant concerns and maintain compliance with safety and regulatory standards. Ultimately, the Maintenance Supervisor ensures that all properties under management remain safe, functional, and aesthetically pleasing to enhance tenant satisfaction and property value. Minimum Qualifications: • High school diploma or equivalent required; technical certification or associate degree in facilities management, building maintenance, or related field preferred., • Minimum of 3 years of experience in maintenance supervision or a similar role within residential property management., • Strong knowledge of building systems including HVAC, electrical, plumbing, and general construction., • Proven ability to lead and manage a team effectively., • Certification in HVAC, electrical, plumbing, or facilities management (e.g., CFM, HVAC Technician Certification)., • Experience with computerized maintenance management systems (CMMS) and property management software., • Knowledge of local building codes and environmental regulations in New Jersey., • Project management experience related to property maintenance or capital improvements., • Supervise and coordinate daily maintenance operations across multiple residential properties to ensure efficient and effective service delivery., • Lead, train, and evaluate maintenance staff, fostering a productive and safety-conscious work environment., • Develop and implement preventive maintenance schedules for HVAC, plumbing, electrical, and other building systems to reduce emergency repairs and prolong equipment life., • Manage relationships with external contractors and vendors, including negotiating contracts and overseeing work quality and timelines., • Respond promptly to tenant maintenance requests and emergencies, ensuring timely resolution and clear communication., • Maintain accurate records of maintenance activities, inspections, and compliance with safety regulations. The Maintenance Supervisor utilizes technical skills daily to diagnose and resolve complex building system issues, ensuring minimal disruption to residents. Leadership and communication skills are essential for managing the maintenance team, coordinating with vendors, and effectively addressing tenant concerns. Organizational skills are applied to develop preventive maintenance schedules and maintain detailed records for compliance and budgeting purposes. Problem-solving abilities enable the supervisor to respond swiftly to emergencies and unexpected repairs, maintaining property safety and functionality. Additionally, proficiency with maintenance management software enhances workflow efficiency and supports data-driven decision-making.

Job Description Data Center Facility Engineer (Days or Nights) This opportunity is working directly with a leading mission-critical data center developer / wholesaler / colo provider. This firm provides data center solutions custom-fit to the requirements of their client's mission-critical operational facilities. They provide reliability of mission-critical facilities for many of the world's largest organizations facilities supporting Enterprise Clients and Hyperscale Companies. This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for a Data Center Facility Engineer to support a critical data center. The Critical Facility Engineer will be responsible for monitoring compliance with contractual commitments, directing technical and administrative tasks related to the operation of the critical facility infrastructure and assuring compliance with company's policies and procedures. The Data Center is a 7x24x365 a year operation. Responsibilities: • Troubleshoot and Run Diagnostics, Conduct Preventive Maintenance and Emergency Repairs on Critical Facilities Equipment within the Data Center as specified and on schedule, • Participates in the preparation of analyses and reports on the data center infrastructure, develops project plans and conducts briefings and presentations, • Partner when necessary with sub-contractors and vendors, • Operate and perform both routine and emergency service on a variety of state of the art critical systems, including but not limited to; Critical power - low / medium voltage switchgear, diesel generators, paralleling switchboards, UPS, PDU, and building monitoring systems, • Ensures that operational, maintenance and emergency methods of procedure (MOP's and SOP's) are developed and strictly adhered to, • 1-5 + years of relevant / technical knowledge and practical experience of Critical Facilities Operations with Electrical and Mechanical / HVAC equipment such as: UPS, Generators, Switchgears, PDU's, CRAC Units, DC Power Systems, CRAH Units, Chillers, Air handling units, computer grade cooling systems, CRAH Units, DC Power Systems, and building monitoring/control systems, • Must have experience in operating, troubleshooting and maintenance of Mission Critical Mechanical and/or Electrical Support Systems, • Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus - Navy Nukes that were part of the Navy Nuke Program - EMN, ETN, MMNs; Seabees; Army - Power Generation; Air Force – Power Production, Generator Techs, Maritime, Coast Guard, etc.), • Strong verbal, written communications skills, • Experience working with various computer systems and applications, • Data Center Facilities Operations Experience a plus Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionJob Summary: Electromechanic We are seeking a skilled and proactive Electromechanic to join our food production facility. This role is responsible for maintaining, troubleshooting, and repairing electrical and mechanical systems on food processing equipment to ensure optimal performance and compliance with food safety standards. Key Responsibilities: • Perform preventive and corrective maintenance on food processing machinery, packaging equipment, conveyors, and automated systems., • Diagnose and repair electrical issues including motors, sensors, PLCs, and control panels., • Troubleshoot mechanical problems involving gearboxes, belts, bearings, and hydraulic/pneumatic systems., • Ensure all equipment complies with food safety regulations and sanitation standards., • Collaborate with production and quality teams to minimize downtime and improve equipment reliability., • Maintain accurate maintenance logs and documentation., • Participate in continuous improvement initiatives and equipment upgrades., • Respond to emergency breakdowns and support production during critical operations.Qualifications:, • High school diploma, • 3+ years of experience in a manufacturing or food production environment., • Strong knowledge of electrical systems, mechanical components, and automation controls., • Familiarity with HACCP, GMP, and other food safety standards., • Ability to read technical manuals, schematics, and blueprints., • Excellent problem-solving skills and attention to detail. full health benefits dental and vision 401k with match program accrued sick pto and vacation Workplace Type This is a fully onsite position in Elmwood Park,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do We are seeking a Senior Network Engineer to join our Backbone & Edge team. In this role, you will be responsible for the day-to-day operations of our backbone network. You'll be troubleshooting, deploying, automating and monitoring every part of the backbone, while also ensuring working closely with our other networking groups to ensure seamless operations of the whole networking stack. You will play a key role in supporting the growth of our backbone network, working with cutting-edge technologies to deliver high-capacity and resilient connectivity. Responsibilities Include: • Operate, monitor, and support the backbone and edge network on a day-to-day basis, ensuring stability performance and uptime., • Troubleshoot routing, optical, and transport issues across multi-vendor environments, driving resolution of incidents quickly and effectively., • Perform configuration changes, maintenance, and upgrades on backbone and edge routers, switches, and optical platforms., • Automate common operational workflows (e.g., config deployment, monitoring, fault remediation) to increase efficiency and reduce manual work., • Proactively monitor network health, capacity, and performance, escalating and addressing issues before they impact customers., • Maintain accurate documentation of procedures, standards, and post-mortems to improve operational consistency and knowledge sharing., • Collaborate closely with datacenter, edge, and peering teams to ensure smooth handoffs and end-to-end network reliability. Who You Are • Proven experience (typically 5+ years) in network engineering / operations for large-scale telecommunications or cloud/content networks., • Demonstrated experience operating large scale backbone networks running protocols such as SR-MPLS, ISIS, BGP, • Ability to troubleshoot complex routing issues quickly and efficiently, • Solid understanding of network architecture principles, including redundancy, diversity, and resilience., • Experience with Nokia SROS, Juniper Junos and other common NOS, • Strong analytical and problem-solving skills, with the ability to interpret complex technical information and make data-driven decisions., • Excellent communication and interpersonal skills, with the ability to effectively collaborate with technical and non-technical stakeholders., • Experience with specific vendor equipment (e.g., Nokia, Juniper, Ciena, nvidia)., • Knowledge of IP routing and switching principles., • Knowledge of optical networking, • Familiar with Python, Ansible, NetBox and other common tools used for network automation The base salary range for this role is $139,000 to $204,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Immediate AUTOMOTIVE PAINTER TECHNICIAN Opening PAY: $25-30/HR Location: Paterson, NJ HOURS: 6:00AM-4:30PM Monday to Friday (OT available) Responsibilities: • Experience with painting, prepping and priming vehicles is a must, • Diagnose and repair electrical, hydraulic, and suspension issues is a plus, • Proven experience as an auto mechanic, specifically with ambulances, • Strong knowledge of electrical, hydraulic, and suspension systems, • Auto painting experience is a plus, • Competitive hourly pay Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Paterson,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description We are a forklift service company that is searching for an experienced forklift mechanic. Would like for you to have prior experience repairing forklifts, pallet jacks and other heavy industrial equipment. Diagnose and repair a variety of mechanical, electrical, and hydraulic issues, including brake systems, tire and wheel changes, and mast and attachment components. Record work orders and maintenance logs to track the history of each forklift Must be able to lift 50 lbs. and have a valid NJ driver's license. Need to be able to speak, read. and write English, bilingual is a plus. Mechanics will provide service for our customers. Should have your own tools. Comprehensive benefits package includes health and dental then holidays vacation and sick time. Great opportunity for someone who is looking to develop their mechanical skills into a career. Job Type: Full-time Schedule: 8 hour shift Education: High school or equivalent (Preferred) Experience: Mechanical Knowledge: 2 years (mechanic related jobs) License/Certification: Valid Driver’s license with a good driving record Work Location: In person

Job DescriptionPosition Description: Electro/Mechanic Company History: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: Responsibilities: \tEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. \tLocates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. \tRemoves defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. \tDetermines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. \tAdjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. \tControls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. \tFabricates repair parts by using machine shop instrumentation and equipment. \tMaintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. \tConserves maintenance resources by using equipment and supplies as needed to accomplish job results. \tProvides mechanical maintenance information by answering questions and requests. \tPrepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. \tMaintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. \tMaintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. \tMaintains safe and clean working environment by complying with procedures, rules, and regulations. \tContributes to team effort by accomplishing related results as needed. \tTroubleshoot PLC hardware, and programing. \tWorking knowledge of control circuits, software knowledge, and relay logic/schematics. \tAbility and or working knowledge of High voltage power. \tRemove place and or program VFD, HMI, and electrical components as needed. \tMaintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. \tClean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. \tRegularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements \tMin 5 years experience \tTechnical or University degree or on-the-job experience a plus Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce \tKnowledge of packing equipment is a plus \tFreezer knowledge a plus \tStrong Sense of Safety \tAbility to walk, bend, stoop, reach, squat and lift up to 50lbs is required. \tColor Vision required. Food safety and quality responsibilities \tEnsure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point \tEnsure quality and safety specifications are met \tDemonstrate food safety and quality, SSOP and GMP policies and procedures \tIdentify employees, processes, and refresher training needed to appropriate management Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $25.00 - $30.00 Hourly

Job Description:\n\nAbout Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Data Center Technician IV Role: The Data Center Technician IV must possess an expert level of knowledge and will be responsible for the operational integrity and regulatory compliance of the data center electrical, mechanical, fire life safety systems, and communications infrastructure. Mechanical responsibilities will include chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, and humidification systems. Electrical responsibilities will include electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load. Fire Life Safety responsibilities will include wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Communications Infrastructure responsibilities will include IFD / MDF / MMR management, structured cabling and supporting infrastructure ownership, and customer space management. This position will also be directly responsible for the processes that maximize customer uptime in the most cost-effective way by working very closely with the Data Center Manager. Technicians must ensure that data center problems are identified and repaired quickly, contractors deliver quality services, and internal customer demands are met. A Tier IV technician develops creative approaches to keep operational costs to a minimum, improve efficiency, and implement new strategies. Please note that this opening is specifically for our NY2 Night shift which requires the ability to regularly work from 11:00 pm to 7:30 am. Duties:Data center subject matter expert for electrical, mechanical, controls, and fire life safety systems.Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control.Tracking and trending operational characteristics.Mentoring of junior staff.Work with the site Data Center Manager to track and complete an aggressive preventive and predicative maintenance scheduleWork with and provides guidance, to the site Data Center Manager to determine maintenance requirements for mechanical and electrical systemsEnsure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction. Ideal candidate will have a demonstrated technical ability and innovative thinking cross functionally, including integrated systems and ITManage systems to avoid unplanned, customer-impacting outagesManage the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiencyProvide applied mechanical and integrated control expertise for the entire data centerWork as a primary knowledge expert in regard to fire and electrical codes.Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities.Assist Data Center Manager with the database management of maintenance discrepancies and work with Operations management to resolve site issues based on agreed upon priorities.Trouble Ticket ManagementWork Order Completion ProcessInfrastructure projects (Internal/Customer) 1. Cage Build-Outs 2. Overhead Installations 3. Rack and StackNavigate and utilize a CMMS system.Use developed procedures to solve problemsAssist in asset and consumable inventory management.Responsible for the tracking and proper labeling of all equipment per established procedures.Ensures that processes are completed in a timely manner pertaining to Service Level Agreements (SLA) and data is uploaded to the OSS accordingly.Provide physical security within the CoreSite premises.Provide day-to-day exceptional customer service and support.Incident escalation and report writingMonitor the building fire alarm system.Maintain and complete regular facility and security tours documenting and responding to found issues.Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and 8Guiding Principles. Requirements Knowledge, Skills & Abilities: Knowledge:Expert understanding of the electrical and mechanical systems used in a facility and data center environment, including, but not limited to the following: electrical distribution and layout, Transformers, PLC’s, Generators, Switchgear, UPS systems, STS’, ATS’ PDU’s, Chilled Water Systems, CRAC/CRAH’s, Pre-Action Sprinkler SystemsExpert knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safetyExpert knowledge of fiber optics / cabling infrastructure and industry best practices.Expert knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)Expert knowledge and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems Skills:Minimum of 5-7 years of experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including: Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, and Double Interlock Pre-Action SystemsProven leadership skillsProven expert and laying out, pulling, dressing, and terminating fiber and copper communications cabling.Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling.Excellent communication skills, both written and oral including Microsoft Suite (Word, Excel, PowerPoint, Project). Abilities:Ability to communicate effectively with customers and internal staff.Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems.Ability to learn quickly and address issues as they arise during normal working hours or after hours.Ability to operate in and promote a rigorous process-driven team environmentAbility to logically analyze and solve problemsAbility to effectively multi-task multiple projectsOperate Hand and Machine Tools (hammer, drill, saw, etc.)Operate electrical tools such as a multi-meter or infrared camera Education/Experience:Bachelor’s degree in Mechanical or Electrical Engineering or equivalent time in rate.5 or more years in a mechanical/electrical position within critical facilities (preference given to a data center, hospital, or power plant experience)Be able to pass an extensive background check including criminal history, professional references, and employment and education verification. Physical Demands and Special Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Ability to stand 1/3 – 2/3 of the timeAbility to walk 1/3 – 2/3 of the timeAbility to sit 1/3 – 2/3 of the timeAbility to climb and balance 1/3 – 2/3 of the timeAbility to stoop, kneel, crouch and crawl 1/3 – 2/3 of the timeAbility to reach with hands & arms 1/3 – 2/3 of the timeAbility to smell, talk & hearAbility to use hands to type, handle & feelAbility to reach with hands and armsAbility to see at close and distance ranges and the ability to see colorMust be comfortable working in a high stress, fast paced environment with shifting prioritiesMust be willing to work outside normal business hours, including weekends, late nights, holidays, and on-call supportAbility to lift up to 50 pounds 1/3 of the time Posting Timeline: This role is anticipated to be posted through July 30, 2025. Compensation: Compensation for this role includes a base salary between $41.94 - $46.64 hourly, as well as performance-based commission and equity. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week!First-day medical insurance through Cigna with generous premium cost coverageDental insurance through Delta DentalVision insurance through VSPTelemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the companyVoluntary coverage benefits for supplemental life, critical illness, accident, and hospital insuranceFirst-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company matchDiscretionary annual bonus and equity incentive planEmployee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO), 11 paid company holidays, and additional floating holidaysAdditional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave, and disability leaveFree parking or a company contribution toward a public transit pass Additional PerksWellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the familyWellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentivesTechnology Stipend: $100 monthly stipendEducational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per yearGiving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grantsFinancial Management: Access to financial coaching, digital tools, and services to manage and pay student loan debt quickerPet Insurance: Keep your furry friends healthy and happyFamily Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacyEmployee Assistance Program: 24x7 service to support family, work, money, health, legal and life challengesCounseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding careReferral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirementsDiscounts: Discounts, cash back offers, and perks on thousands of brandsLinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 4-panel drug test conducted after the offer letter is signed, which will screen for opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionJob Title: Diesel MechanicJob Description We are seeking a Diesel Technician to troubleshoot, diagnose, adjust, and repair equipment and vehicles. This includes working on electrical systems, brakes, hydraulics, cooling, power steering, engines, and other standard components. The role involves performing preventative and corrective maintenance independently, adhering to manufacturer and customer requirements. Responsibilities • Ensure the workplace follows 5S principles by maintaining a clean, organized, and efficient environment., • Independently carry out maintenance servicing on Ground Support Equipment (GSE) and/or Commercial Trucks following OEM specifications and company standards., • Transport GSE and/or Commercial Trucks safely and securely., • Diagnose and repair mechanical issues, including basic electrical repairs, on a range of GSE and/or Commercial Trucks., • Utilize manuals to look up necessary repair information., • Conduct thorough inspections, including checking vehicle hours, fluid levels, lights, and overall condition, to ensure safety and operational compliance., • Report and discuss any damage or work outside the prescribed scope with a supervisor., • Perform refurbishing tasks, including fabrication, body work, painting, welding, and upholstery., • Prioritize tasks effectively to maintain productivity and meet customer requirements., • Perform on-call responsibilities as required, responding promptly to urgent operational needs.Essential Skills, • Experience in preventive maintenance, hydraulics, diesel engines, and electrical systems., • Ability to diagnose and repair diesel and truck engines., • Strong knowledge of electrical, mechanical, and hydraulic systems., • Proficiency in using mobile devices and relevant applications.Additional Skills & Qualifications, • Valid Driver’s License required; CDL preferred but not required., • Must provide personal hand tools; specialized tools and diagnostic equipment are supplied., • A growth-oriented mindset with a collaborative team spirit. Health, Dental, Vision, STD/LTD, and Life Insurance, Employee Assistance Program (EAP) Vacation and Sick Leave, plus a 401K with matching contributions Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on Dec 24, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Come and join our team! TitanCorp is looking for an experienced Maintenance Supervisor for one of our amazing properties. The role of Maintenance Supervisor is to provide proper maintenance for the community, along with providing excellent customer service to all residents and prospects. The purpose of the Maintenance Supervisor is to provide proper maintenance for the entire community. This includes providing excellent customer service to all residents and prospects.. Maintenance Supervisor must wear complete uniform with I.D. badge when working on any Titan Corp. property at all times, including nights and weekends. Essential Duties include the following (other duties may be assigned): 1. Maintenance Supervisor must provide a dependable vehicle for proper maintenance of property., 2. Complete all service requests within 24 hours, unless it requires extraordinary parts or labor., 3. Serve on-call duty as necessary and/or as scheduled by the Community Director., 4. Respond to emergency maintenance calls from the answering service., 5. Keep an adequate supply of parts in the maintenance shop., 6. Keep the maintenance shop in a clean and orderly manner, compliant with any and all regulatory requirements., 7. Responsible for pool and deck area, chemicals, cleanliness, and rest rooms., 8. Responsible for the monitoring, operation, and maintenance of the trash compactor., 9. Help keep grounds and streets free of litter., 10. Maintain and clean car wash., 11. Change air-conditioner filters in laundry and office monthly., 12. Responsible for making sure all breezeways and security lights are in working order daily., 13. Maintain all amenity areas., 14. Assist Community Director in any unusual activity if necessary for the smooth operation of the property., 15. Keep all project directional signs clean, painted, and level., 16. Responsible for bi-weekly servicing and preventative maintenance of golf carts., 17. Place door hanger card on front door when working inside an apartment. Always leave a note for the resident to inform them when and why maintenance has entered their apartment., 18. Communicate with the Community Director before you are going to be out of work for any reason., 19. Monitor grills and picnic areas, repair as needed., 20. Monitor guidelines for cleaning vacant office, and other common areas., 21. Must be able to read and understand service requests, chemical mixes for pools and other chemical uses. Must be able to read, understand, and teach information on hazard warning labels on any chemicals or products used in the operation of the maintenance department. Must be able to read and understand wiring schematics and wiring diagrams. Also must be able to read and understand the distribution panel that supplies power to appliances and electrical equipment used in apartment maintenance., 22. Must be able to trouble-shoot and service HVAC equipment, plumbing equipment, and electrical equipment., 23. Maintain a preventative maintenance program that minimizes necessary repairs and service requests and maintains the physical condition of the property., 24. Hire, develop, and manage a full complement of highly motivated, customer service-oriented, onsite staff., 25. Maintain the company's hazardous chemicals program, and teach and promote proper, safe work practices among the maintenance staff., 26. Provide assistance to the Asset Manager and Community Director during the budgeting process for maintenance allocations., 27. Schedule employees so that service is provided while overtime is minimized., 28. Perform all other duties as directed by the Community Director and assist the overall team effort in any way possible. While performing the above responsibilities and assignments, you may be required to perform tasks that will require a great amount of physical exertion. Listed below are common requirements for your duties as Maintenance Supervisor for Eos: · Use various hand tools and test equipment; these items may vary in weight from a few ounces to 40 pounds. · Use a 30-pound can of refrigerant for servicing of air-conditioners. · Hand-carry and use a 70-pound refrigerant recovery unit. · Hand-carry and install air-conditioning compressors weighing from 40 pounds to 120 pounds, depending upon the size of the condensing unit · Hand-carry and install air-conditioning condenser units weighing 100 to 250 pounds. · Hand-carry and install furnace / forced air unit weighing up to 90 pounds. · Hand-carry and install hot water heaters weighing between 70 and 90 pounds. · Hand-carry and install commode / closet combination weighing 40 to 50 pounds. · Make sure preventative maintenance is done on all weight room equipment. · Use of a ladder is required to change light bulbs in breezeways and on buildings. These ladders could range in weight from 10 to 125 pounds. · Pool maintenance is a big responsibility and often requires you to lift and / or transport 100-pound drums of granular chlorine, 50-pound drums of stick chlorine, and 50-pound bags of soda ash or bicarbonate of soda. You are responsible for replacing pool pump room motors and pumps. These pumps and motors could range from 25 to 200 pounds, depending on the size required. · As part of your daily maintenance routine, you may be required to move appliances from one apartment to another apartment on opposite ends of the community. The appliance may have to be transported by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to over 200 pounds. · At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All of these functions require different physical exertion and their weight depends on the particular equipment (usually in excess of 100 pounds) · You will be required to perform certain resident service functions or make upgrades to the apartment. An example would be to install track lighting or ceiling fans. Both duties would require the work to be done using a stepladder and require lifting with two hands. In addition to the above, you will be required to lift and transport other items pertaining to maintenance (weighing up to 200 pounds) for the smooth operation of the property. Customer Service Responsibilities: · Communicate clearly to the residents, both verbally and in writing. · Read and / or listen to resident requests / concerns. · Receive resident concerns in a calm and open manner. Qualifications: Special Skills Required . Bilingual desired. . Five (5) years Lead Maintenance Technician experience desired · Must be proficient in heating and air-conditioning, plumbing, appliance repair, and in many other areas of repair, which are performed on a daily basis. · Must have a sense of pride about a job well done, be courteous and tactful, and have a commitment to quality work. · Must be clean cut, neatly dressed, and wear proper uniform each day. · Must have good character and background that can stand up under a thorough background check. · Must take and pass a drug-screening test and agility test. · Must be able to communicate to residents, both verbally and in writing, and receive residents' concerns in a calm and open manner. · Must have dependable transportation; capable of carrying tools and parts to ensure an efficient use of time to provide proper building maintenance. · Must have a valid driver’s license. Knowledge · General property operations: · Safety · Heating and A/C · Plumbing · Pool Care · Electrical · Carpentry · Appliance / Equipment Repair · Wallpaper / Painting

Salary: $65,000 plus apartment included in compensation package About Christian Health: We have had the privilege of caring for those in need for more than a century. Founded on the belief that everyone has the right to exceptional care, today we continue to provide quality care and services for our many residents, patients, and clients. Caring is not simply what we do, it is who we are. Why Join Our Team Across our four campuses, eleven communities, five service offerings, and hospital, we are ultimately one unified team. Together, we nurture a compassionate, collaborative culture that enables continuous improvement and allows our team members to learn, grow, and shine in their careers. Surround yourself with people who care about making a difference – come join us! We have an exciting opportunity for a full-time live-in Superintendent to join Summer Hill of Wayne. Summer Hill of Wayne features 140 one-bedroom and 24 two-bedroom apartments for adults 55 and older. This community is designed to meet the needs of active, independent seniors and offers affordable residences in an attractive and secure environment. The position offers a competitive salary with an apartment included as part of the compensation package. The Superintendent oversees daily building operations on the Summer Hill campus, ensuring the maintenance, safety, and functionality of all physical plant systems. This role includes managing maintenance and environmental services (EVS) teams, coordinating repairs, and executing capital projects. The Superintendent ensures regulatory compliance with NFPA, OSHA, NJHFMA , DCA and Fair Housing standards, and leads strategic planning for long-term infrastructure improvements. Technical expertise in HVAC, electrical, plumbing, and mechanical systems is essential. Strong communication skills are required. Competencies: • Troubleshoot and repair plumbing fixtures, chase leaks – medium to strong plumbing skills required., • Troubleshoot and repair electrical issues, including fixtures, light fixtures, and outlets., • Make minor carpentry repairs (fix doors, windows, etc.)., • Performs interior and exterior painting tasks with attention to surface preparation, finish quality, and safety standards., • Oversees and participates in apartment turnover tasks—including cleaning, painting, repairs, and inspections—ensuring completion within a 3-day timeframe by coordinating with occupancy staff and vendors such as carpet installers., • Ability to troubleshoot and maintain HVAC equipment., • Responsible for the emergency power system., • Coordinates the repair of equipment or recommends the replacement of, additions to, equipment or physical plant as necessary., • Makes repairs on systems across all trade disciplines (i.e., tearing down boilers, pumps)., • Operates and maintains physical plant equipment (i.e., boilers, etc.)., • Performs Preventative Maintenance (PM) tasks as assigned., • Administers and implements the preventative maintenance program to ensure uninterrupted operation of the entire physical plant., • Monitors its applications to assure maximum effectiveness and provides appropriate documentation of the same., • Conducts rounds to detect safety and mechanical issues/concerns (i.e., walking or driving)., • Conducts electrical and refrigeration system checks., • Supports preparation and organization of documentation for inspections and actively participates in the inspection process., • Assists in preparation for and participates in various regulatory and accreditation surveys., • Plans and lays out projects as requested., • Accurately estimates and orders materials., • Provides leadership to complete projects utilizing a project team., • Participates in the development and application of standards of quality and productivity for the Maintenance Department., • Supervises Summer Hill Maintenance and EVS., • Maintains inventory of repair and replacement parts., • Creates and closes work orders in Yardi., • Demonstrates strong knowledge of all Physical Plant systems in all buildings., • Possesses good computer skills., • Demonstrates proficiency with technology and software systems, including Yardi and email platforms; writes and responds to emails clearly and professionally, showing strong reading comprehension and communication skills., • Reports safety deficiencies to the Director of Plant Operation Managers., • Understands and practices wiring methods as per N.F.P.A 70., • Familiar with N.F.P.A. article 700 Emergency Systems., • Familiar with OSHA Regulations., • Understands and applies proper grounding of equipment., • Keeps abreast of current federal and state regulations, as well as professional standards, and makes recommendations on changes in programming/services and related policies and procedures., • Works on snow removal operations., • Remains available for after-hours emergency calls, responding promptly to urgent facility issues to ensure resident safety and minimize disruption., • Maintain professional and respectful relationships with all residents at all times. Qualifications: • Five (5) years or more experience in a building maintenance role as a Maintenance Technician., • General knowledge of basic plumbing, electrical repairs, HVAC systems, carpentry and mechanical systems is essential., • Hands-on ability to maintain building mechanical systems and fire systems., • Highly motivated service-oriented self-starter., • Strong communication skills are required., • Proficient in Microsoft 365 applications, including Outlook, and Teams to support daily communication, documentation, scheduling, and team collaboration. Schedule: 8am-4pm, Monday - Friday & Every other weekend. Position requires to be on-call. Education: High School or equivalent. Christian Health offers a wide variety of benefits to full-time employees that includes: • Discounted health insurance, • Dental Program, • Paid Vacation, Personal days, Holidays and New Jersey Sick leave, • 401k plan for all employees who are 21 years old or older, • Group Life Insurance & Voluntary Life Insurance, • Tuition Reimbursement, • Flexible Benefit plan, • Employee Assistance Program, • Direct Deposit, • Credit Union, • Child Day Care Center on campus, • Gift shop on campus, • Free onsite parking on campus, • Free meals for all employees, • Pay differentials, • Exclusive employee discounts and special offers, • Access to earned wages prior to payday If you are interested in this great opportunity, please apply today on our website listed below.

Job Description Summary: This position will provide Electrical and Mechanical repairs throughout the plant. RESPONSIBILITIES Maintenance and Repair: · Conduct hands-on preventative maintenance and mechanical/electrical repair work. · Provide maintenance support to production and other departments as needed. · Perform other duties as assigned. · Maintain department tools and equipment, including inventory and repair · Participate in new equipment installations, modifications or special projects · Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily based on electrical or electronic (not mechanical) principles. · Other tasks may be assigned as needed. QUALIFICATIONS Skills: · Strong communication skills, written and verbal · Strong Electrical and Mechanical troubleshooting skills · Fabrication and machine shop proficiency · Welding experience – Mig/Tig/Arc · PLC – Basic troubleshooting · Electrical controls – Intermediate/Expert · Problem-solving, prioritization, and multi-tasking skills are required · Excellent attention to detail/accuracy and organizational skills · Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly. · Review technical documents to plan work. Education/Experience: o Minimum of 3-5 years of experience in a manufacturing environment Salary Range: $30.00-$32.00 Per Hour Compensation will be determined based on relevant skills and experience. Benefits: In addition to base salary, employees are eligible for a comprehensive benefits package that includes medical coverage (effective after 30 days), flexible spending accounts (FSAs) and paid time off including vacation and sick leave (available after 90 days), and a generous 401(k) contribution (available after one year of employment). We are committed to providing equitable and competitive compensation in compliance with applicable laws, including New Jersey’s pay transparency requirements.

Job Description Job Type: Full-Time Schedule: Monday-Friday Location: FairLawn, NJ Pay Range:$30-$36 depending on skills Responsibilities: • Perform thorough, accurate preventative maintenance inspections., • Following schedules, complete all required maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation., • With direction from the Fleet Maintenance Supervisor, performs unscheduled maintenance as needed., • Performs complex operations including engine, electrical, fuel, brake, and exhaust repairs and field tests. This requires interpreting and working from drawings, specifications, and other technical materials., • Perform emergency roadside services as needed., • Inspection of equipment and diagnose mechanical defects., • Document repairs and parts on work orders completely and accurately, • Maintain tools and workplaces so that conditions are neat and orderly., • Performs other duties as required., • Emergency conditions may require on call service calls, extended hours, or weekend work flexibility., • May, on occasion, be required to drive vans, buses, and vehicles to perform road tests etc., • Perform other duties as required., • Assist with maintaining cleanliness of assigned bus., • 1+ year(s) experience as diesel mechanic or mechanic, • Accreditation from a school or certification program, • Complete all training requirements, • Opportunities for career growth and advancement, • Safety-first environment with comprehensive training & ongoing learning development opportunities, • Special recognition opportunities for exemplary safety and performance, • Dedication to supporting local communities through different charities, partnerships, and events, • Appreciation events, holiday parties, and birthday recognitions throughout the year, • Corporate culture that promotes the safety & well-being of children and families through our fundraising partnership with St. Jude Children’s Research Hospital The below statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. STA is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants; returning military are strongly encouraged to apply. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law.

Job Description Essential Job Functions: General: · Comprehend plans and specifications to perform accurate take offs · Analyze blueprints and specifications to help estimating department determine labor and material costs · Review proposal specifications and drawings to determine work scope with estimators · Consult with internal stakeholders and team · Solicit subcontractor and vendor requests for pricing for the estimating department · Receive and incorporate revisions and addendums into project documents · Attend internal scope review meetings · Participate in meeting for project handover to field personnel · Upload Proposal Letters for estimating department within Company systems · Enter Job Information in Accubid, Building Connected and Estimating Folder · Input estimators notes into Sales Card Cash Flow Analysis · Assemble Job Folders for bid documents for estimating and operations Requirements: General: · Strong analytical skills · Exceptional organizational skills and attention to detail · Proficient in Microsoft Office (Outlook, Word & Excel) · Competency in understanding and explaining take-off sheets for estimating · Excellent customer orientation and service skills · Strong written and oral communication skills · A team player that works effectively with internal stakeholders. Essential Physical Abilities · Able to navigate NJ office buildings and construction sites · Access typical office equipment, access file cabinets · Ability to locate and report to various remote projects sites Education/Experience Required: · 1 year experience in estimating · Proficiency in the use of computers, Microsoft Office Suite, Portable Document Formats (PDF) software, project management software. · Undergradute in Science, Engineering or Engineering Technology ABET curriculum Working Environment · Construction Rooms · Normal Office Environment · Frequently communicates with employees and customers verbally and in writing · Ability to work during weekdays M-F (8am-5pm) Company DescriptionAbout Unity Electric LLC.: Unity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. About Equans: Equans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.About Unity Electric LLC.:\r\nUnity Electric, a full service IBEW electrical contractor, is dedicated to providing integrated, comprehensive service to its clients, including design, installation and maintenance of complex electrical, telecommunications, life safety, security systems, audio-visual, mechanical systems, and Information Technology projects and staffing. Unity is headquartered in New York, with offices in New Jersey, as well as operations throughout the U.S. \r\n \r\nAbout Equans:\r\nEquans, a Bouygues group company, is the world leader in multi-technical services with offices in 20 country hubs. We design and provide customized solutions to improve our customers’ buildings, technical equipment, systems and processes and to support them in optimizing their use. With nearly 90,000 highly qualified employees and a strong geographic footprint through our historical local brands, we have excellent technical know-how in design, installation, maintenance and performance services, with a unique combination of skills as in HVAC, Cooling & Fire protection, Facility Management, Digital & ICT, Electrical, Mechanical & Robotics. Equans expertise and knowledge of our customers’ businesses now place us to support them in their transitions for modernization and sustainable development.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance.

Job Description Regional Construction Inspections Director My client is a Mid-Atlantic regional CIVIL Engineering firm. They are actively seeking a Construction Inspection Director to head up a Regional team. NY and NJ DOT experience to the front of the line! PRIMARY DUTIES: • Design to construction phase transition coordination with design team including constructability reviews during design phase and assumption of project responsibility from preconstruction conference through project close-out., • Responsible for project construction phase planning, staff assignments, coordination with other departments and offices to balance dynamic construction scheduling needs (resource planning) and hiring., • Continued quality control of all payment certifications., • Lead and promote daily communication across Inspection teams and timely communication with design team and clients as needed., • Identify, scope and administer field changes for unforeseen conditions including change order cost and schedule negotiation., • Mentorship for inspection team., • Implement staff development protocols, including skills training and certifications, • OSHA Certifications 10/30, • NICET Certifications I, II, III, • ACI - Field Technician Certification, • New Jersey Society of Asphalt Technicians - Field Testing, • NJDOT - Traffic Control Coordinator, • Work Zone Safety, • Confined Space Training #midsenior #Libertyjobs #CIVILMEP #ConsultingEngineer #Highway Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job Description We’re Hiring: Diesel Technician Location: 300 Victoria Terrace, Ridgefield, NJ 07657 Job Type: Full Time Company: Portside Truck & Auto Repair Pay: $25 - $38/ hr. At Portside Truck and Auto Repair, we take pride in providing top-notch diesel repair and maintenance services for our community. Whether it’s a fleet unit or a heavy-duty pickup, our customers count on us to keep their engines running strong. We are looking for a skilled and reliable Class A, B or C Automotive Diesel Technician to join our fully renovated state-of-the-art facility here in Ridgefield, NJ. If you love turning wrenches, solving problems, and working in a shop where your skills are respected- this is the place for you. Apply now! What You’ll Be Doing: • Preventative maintenance inspections and repairs, electrical troubleshooting, fuel and emissions system, air and hydraulic brake repairs, welding and fabrication, driveline, steering and suspension, plus other duties assigned., • Assisting fellow technicians with repairs while maintaining compliance with safety., • Maintaining knowledge of new technology in advanced diagnostics, internal engine and transmission repairs., • Maintaining a clean and safe work environment., • Completing necessary training. What We’re Looking For: • 2 years of hands-on diesel mechanic experience (heavy- duty preferred), • Advanced skills in strategy-based diagnostics; be able to utilize diagnostic tools and computers to identify root cause and correction, • Freightliner, Detroit, Cummins, Eaton experience preferred, • ASE certifications, knowledge of DOT standards Additional Qualifications: • Strong diagnostic and troubleshooting skills, • Strong verbal and written communication skills, • Commercial Driver's License preferred but not required What You’ll Get: • Competitive pay based on experience and certifications, • 401(k) with company match, • Uniform allowance and tool allowance, • Health, dental, advanced vision, Flexible Spending Account (FSA), • Paid time off + holidays, • Employee discount on services and parts, • A clean, professional shop and great crew to work with To apply, please visit our website - Portside Truck & Auto Repair or reach out to hiring manager Matt Petrosino at “Portside Truck & Auto Repair/ Diversified Automotive Inc., is an Equal Opportunity Employer & Drug- Free work environment”

Job Description About JCMLiving Get to know our company and grow your career with employment at a JCMLiving community. Enjoy our comprehensive financial and benefit packages as well as the support of an experienced and dedicated management team. Our comprehensive benefit package assists our employees to live their best life and grow both personally and professionally. Join our team of passionate and dedicated professionals for a career that will satisfy and enrich your life. JCMLiving is an equal opportunity employer with opportunities in NJ, PA & MD. Please check out our properties and events online at: The Position Apartment Maintenance Superintendent - Looking for a hard-working and knowledgeable technician to assist us to keep our apartments and community looking beautiful and functioning efficiently. The right candidate should have a working knowledge of electric, plumbing, drywall, flooring, appliances, windows and locks and will also live on the property and be responsible for the repairs, upkeep and maintenance of the property and the apartments. We offer great working conditions and hours and excellent wages - paid vacation and sick time 16-25 PAID holidays per year! Candidate required to live on property with apartment as part of compensation. Some responsibilities: • Complete maintenance requests within apartment community, • Lifting of appliances, tile work, drywall work, appliance repair and installation, HVAC repairs, • Snow removal, • Perform and work together with contractors and all employees, • Carpentry, plumbing, light electrical, painting, refurbishing, cleaning, waste removal, heat and air-conditioning repair, masonry, grounds keeping, landscaping and sewer maintenance, • Carry out preventative maintenance program under the direction or Maintenance Supervisor, • Be available for emergency repairs and after-hour "on call" duty as required, • Must be capable of driving all company vehicles with valid driver's license (i.e. golf carts, quads and trucks), • Capable of using all maintenance tolls, • Carrying out all maintenance duties safely that are required for this position Benefits of Employment with JCMLiving • Competitive salary, • Medical coverage, • Dental coverage, • Vision coverage, • 401K, • Life insurance, • Paid sick, holiday, and vacation time, • Free access to pools, fitness centers, pet spas, etc. Candidates, please submit their resume and salary requirements for consideration. All candidates have a drug and background check run on their applications before hire. EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job Description Job Title FIELD SUPPORT ENGINEER TIER 1 Department FSE – Field Service Engineers Company COPAN DIAGNOSTICS, INC Department Scope The Field Service Engineer is involved in all areas of microbiology equipment technology. This position is responsible for new equipment inspections and installations, administering preventative maintenance (PM), calibrating and performing electrical safety tests (EST) on automated microbiology equipment, monitoring work order requests, troubleshooting, completing repairs, and documenting all service activities. PROCESS & KEY ACCOUNTABILITIES Process Key accountabilities SPECIFIC ACTIVITIES Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with electronics, robotics, and mechanical processes. Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards. Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements. Serves as a resource for the proper operation and maintenance of equipment. Instructs instrument operators in proper equipment use. Adheres to the highest level of customer service while managing customer requests with diplomacy. BASIC COMPETENCES Reliable and able to work independently with limited supervision Excellent customer service skills Outstanding communication abilities Computer literacy Ability to read instrument schematics JOB LEVEL SKILLS Associate’s degree in Industrial, Electrical, or Mechanical Engineering, or minimum 2–3 years of equivalent formal related training Comfortable working in clinical environments with infectious agents and biohazards Willingness and ability to work outside normal working hours, including weekends and holidays Ability and willingness to travel extensively (approximately 75%) with minimal notice PHYSICAL REQUIREMENTS Must be able to sit for long periods (e.g., on airplanes or in vehicles) Must have manual dexterity to operate job-related equipment and tools Must be able to occasionally lift and/or move up to 75 lbs Must be able to occasionally crouch, kneel, and/or duck into tight spaces Must be able to stand for long periods Extended kneeling and crouching may be required WORK ENVIRONMENT Frequent travel to off-site job locations Work is often performed in clinical or laboratory settings Exposure to infectious agents and biohazards Unpredictable scheduling, including work on weekends and holidays Pay Rate: $35.00 Hourly-Non Exempt. Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job Description The Company is a leader in the solid waste collection, hauling, and disposal industry. The Fleet and Maintenance Manager is responsible for the Company’s fleet of over 100 trucks, yellow-iron, equipment, and other vehicles. The Fleet and Maintenance Manager promotes a proactive, efficient, and service-oriented program aimed at maintaining the Company’s fleet in peak operating condition. He/She provides management and hands-on direction to the Maintenance Team, including direct supervision of maintenance personnel. The Fleet and Maintenance Manager is responsible for replacement schedules, preventative maintenance and repair of Company vehicles, as well as administrative duties, such as parts procurement, inventory management, asset tracking, and cost control. The Fleet and Maintenance Manager utilizes fleet management and onboard computing software to monitor vehicle performance and cost. Additional Responsibilities • Schedule and oversee all planned repair work to increase productivity and allocate resources appropriately., • Maintain an on-going preventative maintenance program, including, identifying trends in road calls, breakdowns, and maintenance needs., • Direct and coach the Maintenance Team to ensure that all maintenance and repairs are performed in a safe, efficient, and timely manner., • Supervise maintenance employees including coaching and counseling on performance and corrective actions as necessary. Render hiring/termination decisions in collaboration with HR and senior management., • Ensure adequate staffing and proper training of the Maintenance department. Identify maintenance employee training requirements and ensure successful completion., • Monitor the overall performance and efficiency of the Maintenance department and take appropriate actions to increase efficiency and effectiveness., • Accountable for fleet and maintenance budget, including the control of maintenance costs, staff, purchasing, inventory, and outsourcing of repairs., • Ensure compliance with Company safety standards, as well as federal and state regulations, including maintenance and repair records and other required documentation., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems of heavy equipment and vehicles used by the Company, as well as compliance with changes to federal and state regulations., • 10+ years of maintenance/mechanic experience or operational management experience., • 3+ years of experience as a Maintenance Manager or Maintenance Supervisor for a large fleet of vehicles or multiple site locations, or as a Fleet Manager for a medium to large fleet of heavy equipment and yellow iron., • Experience with and knowledge of hydraulic systems, electrical systems, air brake systems, diesel engines, and vehicle computer diagnostics, • Advanced experience working with fleet management and onboard computing software, • Proficient knowledge of Microsoft Office Suite, • Strong communication and leadership skills, excellent time management and organizational skills with the ability to multi-task in a fast-paced environment., • Ability and passion for coaching, mentoring and training employees., • Strong financial acumen and ability to manage to a budget, • Experience working in the refuse industry strongly preferred, • Strong knowledge of DOT, OSHA, and other federal and local regulations and requirement, • Excellent safety record

Job DescriptionPrestige Fleet Services performs onsite truck and trailer maintenance and repairs. We understand today’s fleet maintenance demands. We offer top mobile technicians, equipped service trucks and a team of outstanding professionals to provide exceptional customer service. We offer a competitive compensation package with excellent benefits. We are seeking mobile technicians to join our team! Duties & Responsibilities: • Perform repairs and inspections on a variety of Class 6-8 trucks and trailers, such as brakes, diagnostics, A/C systems, electrical systems, engine components, exhaust systems, after-treatment systems, lift-gates, tires, etc., • Truck and Trailer experience required!, • Forklift experience a plus!, • Schedule and overlook all maintenance procedures, including preventive maintenance and DOT inspections., • Repair/Replace vehicle/ trailer components., • Open and Close repair orders on a company-issued device., • Obtain parts from local vendors and manage inventory on the service truck., • Accurately complete DOT forms and all other forms of documentation in a timely fashion.Requirements:, • Minimum of 3 years of diesel repair experience preferred., • Communication skills, • Ability to work extended and/or irregular hours including weekends and holidays when needed., • Valid Driver’s License required., • Self-motivated with excellent organization and planning skills, • Ability to utilize a computer/tablet for electronic processing of work orders which includes adding labor hours and updating work order statuses., • Must be able to lift up to 50 lbs. Must be able to bend, stoop or crawl., • Must be able to stand for long periods of time (1-2 hours), • 2 years' experience in performing annual federal inspections and brake inspections., • Salary $30-43/hr. Salary depends on experience. Powered by JazzHR 8RfKyun69e

Job Title: Instrumentation Control Technician Location: Lyndhurst, NJ Type: Contract To Hire Compensation: $33 - $36 hourly Contractor Work Model: Onsite Hours: Monday through Friday (6AM to 230PM) Responsibilities: Analyze, document, and test computer control systems based on user specifications and operating requirements. Develop, test, and document computer programs related to machine control and operating systems. Perform maintenance, troubleshooting, and calibration of instrumentation and control devices to ensure accuracy and reliability. Manage the calibration program, including scheduling, performing calibrations, and maintaining records in Calibration Manager Software in compliance with ISO 9000 standards. Support the maintenance and repair of labeling equipment, electrical systems, and electronic devices. Apply systems analysis techniques and collaborate with end users to identify and resolve control system needs. Provide weekend or on-call support as needed for troubleshooting and plant operations. Qualifications / Experience: 5–10 years of experience in an ISO 9000 or process-type industrial facility (chemical, pharmaceutical, or food industry preferred). Minimum 1 year of relevant experience with Technical School training; college degree a plus. Strong electrical background with hands-on experience in computer systems, PLCs (Allen-Bradley preferred), and pneumatic/hydraulic devices. Familiarity with CMMS software and smart instruments is a plus. Skilled in analyzing, testing, and troubleshooting with an organized, methodical approach to problem-solving. Ability to read and interpret technical drawings (P&IDs) and ladder logic diagrams. Proficient in performing instrument calibration and preventive maintenance. Strong communication skills and the ability to work independently or as part of a team. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description About the Role We’re looking for a skilled Refrigeration Field Technician to join our commercial and industrial HVAC/R team. This hands-on role involves installing, servicing, and maintaining refrigeration systems, ranging from halocarbon to ammonia-based setups, across a wide range of facilities. If you have strong technical knowledge, take pride in safety and craftsmanship, and enjoy solving complex mechanical challenges, this could be a great fit. You’ll work closely with our service manager, dispatch, and office team to ensure timely, high-quality service delivery and customer satisfaction. What You’ll Be Doing • Perform preventive maintenance, repair, and installation of HVAC/R systems, • Troubleshoot mechanical and electrical components of refrigeration equipment, • Ensure all work complies with OSHA, EPA, local, and union codes and standards, • Communicate effectively with customers, team members, and supervisors, • Accurately record labor, materials, and service details on job tickets, • Respond to emergency service requests when needed, • Maintain truck stock and ensure proper use of tools and safety gear, • Assist with crane signaling and equipment placement when required, • Report safety concerns, service trends, or customer issues promptly What We’re Looking For • High school diploma or GED, • Technical school or refrigeration trade training preferred, • 2–5+ years of hands-on HVAC/R field service experience, • EPA Refrigerant Certification (required), • Familiarity with commercial and industrial HVAC/R equipment, • Strong understanding of electrical, pneumatic, and control systems, • Ability to read blueprints, schematics, and technical documents, • Valid driver's license with clean driving record, • D2 or S2 license preferred, • Ability to lift up to 100 lbs and work in varied physical environments, • Willingness to travel and occasionally stay overnight on job sites What You’ll Get • Competitive pay based on experience, • Health, dental, vision insurance + free telehealth, • 401(k) with company match, • Paid time off, holidays, and sick leave, • Career growth with paid certifications and training, • Company vehicle or allowance, phone allowance, uniforms, and PPE, • Supportive team culture with experienced management Physical & Work Environment This is a physically active field role. Technicians must be comfortable working in extreme weather conditions, confined spaces, rooftops, and mechanical rooms. Frequent standing, climbing, kneeling, bending, lifting, and reaching are required throughout the workday.

Job Description Van Dyk Park Place Assisted Living is seeking a Full Time Maintenance Technician to join our award-winning team in Hawthorne, NJ (07506). When searching for your next career, choose a company with a 72-year legacy of excellence, proudly Great Place to Work® certified 8 years in a row. At Van Dyk, you’ll join a team where family values still matter — and your skills truly make a difference. Pay Rate: $25.00–$27.00 per hour HVAC-Experienced Maintenance Technicians — Apply Today! This is a hands-on, active role ideal for an HVAC-skilled professional who enjoys problem-solving and takes pride in keeping building systems running smoothly. We are seeking candidates with 5+ years of maintenance experience — and experience in an Assisted Living or Healthcare environment is a major plus. If you have strong skills in HVAC, electrical, plumbing, and general building systems, we want to meet you. Key Responsibilities (HVAC-Focused): • Perform regular HVAC system maintenance, troubleshooting, and minor repairs to ensure optimal heating and cooling performance for residents and staff, • Conduct routine and preventive maintenance across electrical, plumbing, heat and A/C, carpentry, and building/grounds systems for all Van Dyk properties, • Complete apartment turnover repairs and upgrades in a timely manner, • Respond to emergency calls and maintenance issues across the main building, corporate office, and rental properties, • Maintain a flexible schedule, including after-hours, weekends, holidays, and on-call shifts as needed, • Provide outstanding customer service to residents, tenants, families, guests, and staff, • Diagnose issues quickly, determine correct repairs, and execute them safely and efficiently, • Minimum of 5 years’ maintenance experience, ideally with HVAC specialization, • Strong competency in HVAC, electrical, plumbing, and building systems, • A roll-up-your-sleeves, can-do attitude, • Excellent problem-solving skills and the ability to work well under pressure, • Competitive wages, employee referral bonus, and customer appreciation bonuses, • Tuition reimbursement, • Paid orientation, free meals, paid rest breaks, and free uniforms, • Holiday raffles and gifts, including a free Thanksgiving turkey, • Innovative recognition programs for performance and tenure, • Staff appreciation events, suggestion programs, and birthday celebrations

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, all designated holidays and 5 non-designated holidays a year. 3 Partial Sick Days. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Position Overview We are currently seeking a skilled HVAC Technician with strong commercial experience to join our growing team. In this role, you will be responsible for the installation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and refrigeration systems in commercial buildings. The ideal candidate is reliable, safety-focused, and has hands-on experience with a variety of HVAC systems used in office buildings, retail spaces, schools, and other commercial facilities. Key Responsibilities * Install, inspect, and repair commercial HVAC systems, including rooftop units, split systems, chillers, boilers, VAV systems, and ductwork. * Perform preventative maintenance tasks according to established schedules and equipment specifications. * Diagnose and troubleshoot mechanical and electrical issues in HVAC systems. * Ensure all work complies with local, state, and federal codes, as well as company and safety standards. * Maintain accurate service records, work orders, and equipment documentation. * Communicate effectively with clients, supervisors, and other team members regarding service updates and repair recommendations. * Assist in startup and commissioning of new systems and equipment. * Respond to emergency service calls in a timely and professional manner. * Maintain tools, equipment, and company vehicles in safe and proper working condition. Qualifications * High school diploma or GED required; technical or trade school certification in HVAC is preferred. * 3+ years of experience as an HVAC technician in commercial environments. * EPA Section 608 Certification required. * Valid driver's license with a clean driving record. * Strong knowledge of HVAC systems, controls, refrigeration cycles, and associated components. * Ability to read and interpret blueprints, technical diagrams, and service manuals. * Familiarity with digital HVAC tools and software is a plus. * Excellent troubleshooting skills and attention to detail. * Ability to work independently and as part of a team in a fast-paced environment. * Must be able to lift up to 50 lbs, work at heights, and in confined spaces when needed. Benefits * Competitive hourly wage based on experience * Health, dental, and vision insurance * 401(k) with company match * Paid time off and holidays * Opportunities for training, certifications, and career advancement * Company vehicle and tools provided (where applicable)

Job Description Are you a Certified HVAC/Refrigeration Technician looking for a place to build your career - not just another job? We are looking a Journey Level Refrigeration Technician for full-time, year-round commercial service work in and around the Newark, NJ area. Looking for the right job is tough. Come join us, and you won't need to look again! We are seeking career-minded techs who are ready to start their last job and enjoy the work/life balance we offer for years to come! With full benefits, paid holiday/sick/vacation time, room for growth, and team that has your back, this is the place for you! Apply now! RESPONSIBILITIES: · Maintain, diagnose, and repair multiple types of refrigeration systems, as well as all mechanical and electrical components related to the equipment (such as self-contained coolers and freezers, single and rack systems, etc.) · Perform minor plumbing repairs on refrigeration equipment, including walk-in drain lines, case drain lines, cooling towers and water-cooled condensers · Inspect plumbing, electrical, and refrigeration systems and identifying specifications that are required · Perform preventative maintenance and repairs for HVAC and Refrigeration · Collaborate directly with grocery store managers and store directors · Quote equipment repairs and recommend replacement when necessary · Maintain proper van stock, tools and safety equipment on work van SKILLS: · Good judgement for use of supplies and materials in refrigeration repairs · Attention to detail and critical analysis for diagnostics and work performed · Professional communication skills · Mechanical aptitude QUALIFICATIONS: · 2+ years prior HVAC/R experience · Be available for ON CALL work as needed · Ability to pass a physical/drug screen/background investigation/ driving abstract as needed BONUS POINTS: · Universal EPA License • Electrical License · 2-3 years of grocery refrigeration / HVAC experience · Related education/certification in HVAC and refrigeration industry It's time you take the first step into your last job! If you're done wasting time in the wrong place, apply now!

Job DescriptionAbout Weee! Weee! is the largest and fastest-growing ethnic e-grocer in the United States, operating in one of the largest underserved categories in retail with affordable access to exciting ethnic food. By partnering with local suppliers, redesigning the value chain and leveraging social buying, Weee! is reshaping the grocery business entirely. You can read more about us on Business Insider, Reuters and TechCrunch. Weee! is headquartered in Fremont, CA, and is currently available coast to coast with exceptional growth (5x YoY) across geographies, categories and ethnicities. We have raised $800M+ in funding to date from leading investors including Softbank Vision Funds, DST, Blackstone, Tiger Global, Lightspeed Ventures, Goodwater Capital, XVC and iFly. The opportunity now is to join a rocketship as we prepare for the next stage of growth, and an eventual public listing. Responsibilities • Maintain ammonia refrigeration and freon-based cooling systems including operation, maintenance, and repairs, • Maintain and operate single, two-stage, cascade ammonia systems and subsystems, • Monitor and identify abnormal operating pressures, temperatures, and conditions within the refrigeration system; adjust, repair, and/or schedule service as required, • Operate refrigeration system components including vacuum pumps, chillers, evaporators, condensers, compressors, controls, and valves, • Perform and delegate daily, weekly, monthly, and annual inspections and preventative maintenance on refrigeration equipment and cooler machinery on and off-site, • Perform maintenance duties such as plumbing, replacing valves, installing fixtures, detecting and repairing leaks, • Handle hazardous materials following OSHA and EPA guidance, • Monitor and record all system readings to document equipment operation and provide reports and troubleshooting, • Respond to emergency breakdowns of refrigeration systems, • Procure quotations and bids for work scopes, repairs, parts, and construction projects, • Ensure continuous training and competency on refrigeration updates and standards, • Train personnel for routine checks and system operations following SOP, • Act upon EAP and technical guidance during emergency and system malfunction situations, • Handle unscheduled and emergency equipment shutdowns, • Ensure all refrigeration equipment functions in a safe and optimal manner, • Support continuous operation of facility utility systems and preventative maintenance programs, • Assist in record-keeping and training requirements for ammonia refrigeration system compliance with state and federal guidelines, • Perform duties as assigned by the facility ManagerQualifications, • Blue Seal (Toxic) Operating license issued by the state of New Jersey, • Minimum 3 years of ammonia and freon-based refrigeration experience, • Experience with screw and reciprocating compressors, recirculation pumps, HVAC units, boilers, air compressors, and associated control systems, • Work experience in ammonia system pump-downs and repairs, • Strong electrical and mechanical troubleshooting skills, • Ability to understand refrigeration blueprints, P&ID, and cut sheets, • Trained and experienced in lock-out, tag-out, and safe work practices, • Must be able to respond to emergencies 24/7 including after hours and weekends, • Best-practice and professional knowledge of industrial maintenance and standards, • Able to perform in a fast-paced environment, • Detail-oriented, cost-conscious, and deadline sensitive, • Able to climb stairs and ladders and be fall-protection trained, • Able to work at variable heights, • Able to lift, push, and pull 50 lbs., • At least 3 years of active experience with cooling processes, ammonia refrigeration, and freon-based facilities within a produce/food processing and storage facility, • Knowledge of chemical testing for cooling towers and ammonia systems, • Hazmat Responder Certification Work Schedule, • 12-hour shifts: 6AM-6PM, • 2 days per week: Saturday and Sunday, • Night shifts, weekends, and holidays required, • The US base salary range for this position is $35.85 - $42.25 Please note that the compensation details listed in US role postings reflect the base salary only, and do not include any variable compensation elements. Weee! is an equal opportunity employer welcoming all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other basis prohibited by law. Discrimination or harassment of any kind is not tolerated at Weee!. If you need to inquire about an accommodation or need assistance with completing the application, please email us at . For more jobs and to find out more about Weee!, visit our career page: Softbank Vision Funds

Job DescriptionJob Title: Electrician (Mechanic / Journeyman / Lead Foreman) Company: Safenest RepairsJob Summary: Safenest Repairs is hiring skilled Electricians across all experience levels to support a range of electrical installation, maintenance, and troubleshooting projects. We offer a 3-day performance guarantee and a clear path to full-time employment after 12 weeks (520 hours). Competitive billing structure with a 45% markup applies.Key Responsibilities: Electrician Helper • Utilize basic hand tools, • Organize and handle materials, • Assist in pulling wire, • Perform mounting and strapping, • Help with underground rough-in work, • Maintain a safety-conscious work environmentMechanic, • Perform pipe bending and conduit installation, • Install trim-outs and fixture connections, • Conduct wire pulling and rough-in tasks, • Terminate junction boxes and control panels, • Interpret basic blueprints and sketches, • Size conduit and boxes, • Install transformers and branch circuitsJourneyman, • Size wire and conduit accurately, • Install switchgear, feeders, and motor controls, • Handle advanced layout and system prep, • Troubleshoot controls and circuits, • Read and interpret complex blueprints, • Apply electrical theory knowledge, • Perform rigging and equipment installationLead / Foreman, • Lead and manage a crew, • Direct and plan project work, • Order and track materials, • Install and troubleshoot all electrical systems, • Monitor job progress and quality, • Ensure compliance with codes and regulations License Requirements 1. Journeyman (must-needed), 2. Tradesman Electrician ( Work Registration) Job Type: • Full-time (eligible for permanent hire after 520 hours)Incentives:, • Quickly payments and Overtime allowances, • Full-Time Hire After 12 Weeks (520 hours), • Bill Rates: 45% markup Powered by JazzHR 61VcKrGODR

InVision is a Professional Recruitment Firm specializing in Engineering, Industrial/Skilled Trades, Information Technology and Professional Services within Canada and the U.S. We have a successful track record working on both small and large recruitment projects, across North America. Our client is a global expert in electrical specialties and advanced materials for high-tech industries. With more than 50 industrial sites and 16 R&D centers in 35 countries around the world, they develop custom built solutions and delivers key products to its clients in order to meet the new technological challenges shaping tomorrow’s world in the wind power, solar power, electronics, electric vehicles, aeronautics, space and countless other industries. They are seeking a Production Manager to join them on a full-time permanent basis. Key Responsibilities Production Leadership & Execution • Plan, organize, and manage daily production operations to meet customer requirements (output, quality, on-time delivery)., • Develop and maintain production schedules while managing labor and equipment resources efficiently., • Coordinates shipping activities to ensure on time delivery., • Manage Maintenance team to ensure OEE targets are met., • Monitor production performance using KPIs such as OEE, Scrap, Downtime, Throughput, and Productivity., • Lead, coach, and develop production supervisors, team leaders, and operators., • Promote a performance-driven culture with clear expectations and accountability., • Conduct regular team meetings, training, and capability development programs., • Ensure product quality meets internal standards and customer specifications., • Implement Lean Manufacturing, 5S, and Kaizen improvement projects to increase efficiency and reduce waste in collaboration with the operational excellence team., • Ensure a safe working environment by ensuring HSE rules and procedures are respected., • Work with HSE Regional manager to identify potential risks and implement safety improvements., • Monitor production budgets and control labor, scrap, and operating costs., • Optimize equipment utilization and drive productivity improvements., • Support capital investment planning and implementation. Qualifications Education & Experience • Bachelor’s degree in Industrial, Mechanical, or Manufacturing Engineering, or equivalent related experience., • Minimum 5–7 years of manufacturing/production experience, including at least 2–3 years in a leadership role., • Experience in Lean Manufacturing, Continuous Improvement, and Quality Management., • Strong leadership and team management capabilities, • Excellent problem-solving and decision-making skills, • Knowledge of ERP/MRP systems (JDE, SAP, Oracle, Microsoft Dynamics, etc.) Employment Rewards: • Full Time Permanent, • Benefits (medical, dental, vision), • Paid Time Vacation, • Annual Bonus, • 401K + Match Application Process: All Qualified candidates will be contacted. InVision is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: It is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment.

At Kushner, we pride ourselves on our four core values: Be Caring, Be Best in Class, Be Solution-Oriented, and Be Accountable. Our values represent what we strive to achieve every day. Every decision we have to make is guided by the “4 Be’s”. Our team and passion for the real estate industry exemplifies what it means to live out these core values in our offices and at our communities day in and day out. Each new day is a learning experience at Kushner, whether it is the knowledge we bring, gain, or share during our journey together. Our team members are set up to aim beyond, achieve the utmost success, and for endless possibilities for growth. Come Grow With Us! JOB SUMMARY This position is responsible to lead one or more construction projects and for the management of the overall planning, scheduling, code compliance, cost tracking, safety, and completion of these projects. The Superintendent is responsible for directing and mentoring subcontractors and other on-site field staff. The position requires business management acumen and must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and team building skills. WORK HOURS: Weekdays 7 am to 5 pm; Saturdays 7 am- 1pm, as required. RESPONSIBILITIES: • Assure the required permits and approvals from jurisdictional agencies are secured, posted, and renewed as required prior to starting work., • Develop, update, modify (as required) and maintain the project schedule including a master schedule, 60-day look ahead schedules for their assigned trades, and two-week look ahead schedules for their assigned trades., • Understand and be familiar with the date by which all materials must arrive on the job and convey that information to the project management team for preparation of the contract items lists and shop drawing schedules., • Coordinate scheduling of subcontractors, vendors, and inspectors to complete each project on time., • Communicate with and support each subcontractor to execute their job duties effectively and efficiently., • Monitor work and materials to ensure quality control standards are met at various stages of the project., • Perform inspections or schedule inspectors to meet the varying safety and compliance regulations of each job location., • Prepare the daily construction reports in a thorough and timely manner and maintain a written daily log of visitors, job actions performed, materials expended, and problems resolved on the job site., • Assure daily job progress photographs are taken in ample quantity to accurately depict the progress of the work., • Travel between multiple job sites and simultaneously manage work loads of individual projects, • Understand and ensure risk controls are properly established and maintained., • Understand and uphold the site safety plan., • Understand and uphold the site logistics plan., • Assure the implementation and continuous maintenance of corporate safety program requirements in all of the day-to-day operations on the project., • Prepare and attend the weekly subcontractor meetings. Assist in maintaining the minutes of these meetings, and ensure they are recorded and distributed., • Prepare and manage weekly safety meetings, regular toolbox talks, and safety pre task meetings as required., • Attend weekly meetings with the project team for purposes of updates on the status of the field work and communication of any issues requiring the input or action of others on the project team, and for notification to the project team of issues that may be of importance or interest to them., • Establish and maintain a system of document control to assure work is being installed in accordance with the latest design documentation and approved shop drawings., • Communicate any issues requiring additional information from designers and consultants in a timely fashion to the project manager for issuance of RFI’s., • Assist in preparation of the monthly status report to be submitted to the lender. REQUIREMENTS: • Requires Engineering, Construction Management or related Bachelor’s degree, OR equivalent years of related experience., • Requires 10+ years of experience in Stick-frame Multi-Family Residential Construction. Previous Sitework and Structured Garage Construction experience is preferred., • Requires working knowledge of various construction disciplines, cost control, scheduling, safety regulations, engineering drawings and other documents required., • Requires superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential both within the internal project team and externally with subcontractors, labor force, etc., • Requires the ability to work with and have knowledge of the shop drawing submittal process., • Requires the ability to read and comprehend building plans and specifications and able to comprehend and recognize safety standards and issues., • Requires the ability to determine the priority of assignments based on critical deadlines., • Requires the ability to resolves field-initiated questions., • Requires understanding of construction contracts, retention, releases., • Requires the ability to interact with all levels of personnel and customers., • Must possess strengths in verbal and written communications; ability to adapt communications/presentations and deliver clear and concise reports and analysis to senior management., • Requires ability to meet deadlines and work in a structured corporate environment., • Requires the ability to be self-motivated and work independently with minimal supervision. Also requires high degree of ethics and integrity., • Requires ability to maintain confidentiality of all company and customer information. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. These demands are typically required when working onsite. • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Must occasionally lift and/or move up to 50 pounds., • While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock., • Noise in these work environments is usually moderate to very loud. Benefit Highlights: • $2k relocation benefit available, • We match 50% of the first 6% of 401k contributions, • No wait period for Health Benefits & we contribute $1k to the HSA plan, • We have assistance for student loans as well as tuition reimbursement, • We have a great employee referral program, • We offer a housing discount in all our communities EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

This role involves performing preventive, predictive, and corrective maintenance on food processing and packaging equipment to ensure reliable and efficient production.The Maintenance Mechanic will troubleshoot mechanical, electrical, pneumatic, and hydraulic systems while supporting daily operation

Perform mechanical, electrical, and other types of repairs. The purpose of this job is to perform repairs, and maintenance, on most machines, and work areas within the plant including (but not limited to) extruders, molders, braiders, electrical, plumbing, and general mechanics and groundwork. Organ

Inspectors are responsible for conducting routine inspections, testing, service, and preventative maintenance on Electrical, Sprinkler or Suppression life safety product lines as well as similar competitive manufacturers' product lines. Test and inspect fire alarm systems with existing and new custo

Maintenance & Electrical repair, PLC fault diagnostics, and mechanical maintenance in a light manufacturing environment. The Maintenance Manager role is responsible for the safety, employee engagement, productivity, quality, and customer service associated with a multi-shift Maintenance operation. D

STATE ROUTE 23 [Maintenance Worker / Facilities] As a Maintenance Clerk at Costco, you'll: Build and repair fixtures and structures; Repair plumbing and electrical systems under 24 volts; Perform routine maintenance and repairs for forklifts, machinery and equipment for both ancillary businesses and

As a Refrigeration Technician, you will work with the maintenance team to maintain, troubleshoot, and repair HVAC, Refrigeration and facilities equipment to maintain critical temperatures and improve reliability of our systems. Ability to safely replace mechanical and electrical components including

ASM Global - JobID: R100114802 [Maintenance Technician] As a Maintenance Worker at ASM Global, you'll: Maintain cleanliness and orderliness of the venue; Perform routine inspections and repairs of equipment and facilities; Ensure proper functioning of electrical, plumbing, and HVAC systems; Assist i