Manufacturing production jobs in Uniondale, New YorkCreate job alerts

Job Description Job Summary The Sanitation Specialist is responsible for deep cleaning and sanitizing of food production rooms, equipment and all other rooms associated with a high and low care areas in a food manufacturing facility while following the 7 steps of sanitation to ensure optimal cleanliness. Primary Responsibilities * Deep clean and sanitize Floor, walls and food production equipment following the 7 steps of sanitization. * Clean windows, glass partitions, and mirrors, using soapy water or other cleaners, sponges, and squeegees. * Dust off packing areas of debris and other loose particles. * Wipe metal detector and tables. * Power wash floor. * Mix Various cleaning agents * Identify and report possible repairs * Other activities as assign by supervisors Requirements * High school diploma. * Prior Cleaning experience ‘’preferred’’ * Cell phone and email access.

We are looking for an Engineering Manager for our Westbury, NY facility. The Engineering Manager must possess an innovative mindset, with an above average level of determination and tenacity. They will actively propose/implement sound (preventive) measures to reduce the likelihood quality defects and equipment failure (i.e., unplanned downtime). These efforts will be taken with the intention of increasing production throughput, yield and reducing waste streams including powder loss. \n\n The Engineering Manager will drive/co-develop/implement visionary efforts geared towards simplifying current production processes, researching/incorporating new technologies and actively leading the technical efforts of the engineering team in driving process improvements that result in the further establishment/maintenance of a hazard & defect free workspace. \n This position will report to the Director of Operations and have direct reports covering engineering and project activities. \n\n Your Responsibilities: \n\n\n\n\n • Drive process simplification and error proofing throughout operations. Ensure sustainment of optimized processes. Will work closely with Director of Operations, Production and the Reliability Team in increasing product yields as well as reducing overall operating costs and processing times.\n, • Examining the root cause(s) analysis corrective actions to ensure the appropriateness of any non-conformances, administering corrective and preventive action programs to eliminate recurrence. These actions may include SPC, co-worker training, technical supervision, alternative analytical techniques, and the modification of manufacturing practices / documentation. Likewise the Engineering Manager leads the manufacturing group in the development and documentation of optimized process parameters\n, • Leading ongoing process improvement programs and the implementation of new technology at Westbury. When such projects involve collaboration with an outside entity, the Engineering Manager shall serve as the principal Westbury contact and must work with key stakeholders to gain alignment.\n, • The Engineering Manager will serve as a technical resource for Engineers, Supervisors and process operators at Westbury. In this capacity, the Engineering Manager will spend a considerable amount of time one-on-one with the co-worker explaining complex ideas.\n, • Serve as a resource to facilitate Lean & continuous improvement initiatives at the site level.\n, • Drive cost & variance reduction efforts for materials manufacturing.\n, • Maintains BOMs and Recipes related to materials manufacturing.\n, • A Bachelor’s degree in Engineering is required.\n, • Minimum 5 years’ experience in a Process Engineering role, preferably in a powder manufacturing environment focused on manufacturing Ceramics, Metals, Carbides, and similar materials.\n, • Six sigma green belt certification is required.\n, • Strong technical management & leadership skills.\n, • Familiarity with chemical formulation and batch-making processes\n, • Ability to communicate both verbally and in writing, with strong computer skills.\n, • Demonstrated ability to work in a team environment and monitor the efforts of others.\n, • Able to manage multiple priorities\n, • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong. \n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey. \n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals \n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off. \n, • Flexible hours or remote work environment available for certain positions\n, • 100% company paid life insurance and disability insurance\n #joinoerlikonus #joinourteam \n\n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n\n Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $120,000 to $150,000 per year. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire.

Job Description Summary: Reporting to the Vice President of Operations and serving as a member of the Senior Management Team, this position's primary responsibility is ensuring organizational effectiveness by providing leadership for Parabit's project management functions. The Project Manager will help create organizational strategies, policies, and practices in collaboration with the President and Senior Management. This position will manage a variety of accounts and projects, and will also assess new build plans, assess various procedures in the production process (review manufacturing systems to reduce cost, improve quality and develop best practices), and maintain an open line of communication with multiple department, vendors and clients. This position will also implement ISO 9000 practices and guidelines with certification as a future objective. Responsibilities: • Leads the orderly progression of projects from the proposal stage through project completion by interacting with the client, technical staff, and business development staff., • Manage and increase the effectiveness and efficiency of departmental procedures, and communication between departments., • Maintains project documentation - communications, schedules, sample submission paperwork, meeting minutes., • Ensures timely and smooth transition of projects through Tech Transfer and R&D project phases., • Hold cross-functional teams accountable and give direction to project personnel., • Maintain accurate open Purchase Order lines to define the inbound quantities and due dates from vendors, identify system demand or BOM issues, and resolve inventory discrepancies., • Utilize industry best practices, techniques, and standards throughout entire project execution., • Regular meetings with the President and Sr. Management around project planning. Organizational Leadership • Contribute to short and long-term organizational planning and strategy as a member of the senior management team., • Drive initiatives in the organization that contribute to long-term operational excellence., • Other tasks as assigned Qualifications • 4 year bachelor's degree., • Strong appreciation of the design-build contracting methodology and prior experience completing design-build projects., • At least 3 years' experience in the Project Management field., • Strong background and work experience in manufacturing., • Excellent computer skills and proficient in excel, word, and outlook., • Excellent communication skills both verbal and written., • Knowledge and experience in organizational effectiveness and operations management implementing best practices., • Demonstrated leadership and vision in managing staff and major projects or initiatives., • Excellent interpersonal skills and a collaborative management style., • Budget development and oversight experience., • A demonstrated commitment to high professional ethical standards and a diverse workplace., • Knowledge of compliance implications., • Excels at operating in a fast-paced environment., • Open to direction and collaborative work style and commitment to get the job done., • Ability to challenge and debate issues of importance to the company., • Ability to look at situations from several points of view., • Persuasive with details and facts., • Delegate responsibilities effectively. Join an exceptional and energized team that shares a common belief in the value of creativity, operating with integrity, and leading through innovation. Parabit Systems is focused on growth - growing revenues and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. We offer competitive pay, health benefits, paid vacation, paid sick days, and a 401k. Please submit your resume via email to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description If you know the sound of a spindle, the smell of cutting oil, and the satisfaction of fixing a machine that others cannot, you will fit right in at Schivo Medical. We keep the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and keep complex machines humming. Position Summary The CNC maintenance tech is responsible for maintaining, troubleshooting, and repairing CNC machining equipment and general production support systems in a manufacturing environment certified under ISO 13485. The role ensures optimal equipment performance, minimal downtime, and adherence to all regulatory, safety, and quality standards. This technician supports operations through timely repairs, preventative maintenance, and equipment installation/modification efforts. The role also includes facility support for auxiliary equipment and infrastructure, with a focus on Lean manufacturing principles. CNC Maintenance tech Key Responsibilities • Perform corrective and preventative maintenance on CNC machinery, including Tornos Deco, Okuma, and Mori Seiki machines., • Troubleshoot and resolve mechanical, electrical, pneumatic, and control system issues across manufacturing and facility equipment., • Maintain and service auxiliary equipment such as tumblers, chip conveyors, and coolant systems., • Support equipment installations, commissioning, relocations, and layout modifications., • Maintain accurate records of all maintenance activities using a CMMS, including service logs, PM documentation, and part usage., • Ensure all maintenance and repair work is compliant with ISO 13485, internal SOPs, and safety standards., • Utilize and support Lean tools such as 5S, Kanban, and root cause analysis (RCA) to maintain a clean, organized, and efficient work environment., • Collaborate with cross-functional teams on continuous improvement efforts related to equipment uptime, reliability, and productivity., • Coordinate with OEMs, contractors, and vendors as needed. Education & Experience: • High school diploma or GED required; technical certification or associate degree preferred., • 3–5 years of firsthand experience servicing CNC machinery and production equipment., • Experience with CNC control systems such as Fanuc and Okuma OSP is strongly preferred., • Prior work experience in regulated manufacturing (ISO 13485, GMP, or similar)., • Exposure to or use of Lean manufacturing practices such as 5S, Kanban, and visual controls., • Strong mechanical and electrical troubleshooting skills., • Ability to read and interpret technical drawings, schematics, and manuals., • Experience with CMMS platforms for maintenance tracking., • Proactive, organized, and meticulous with a strong focus on safety and quality., • Ability to work independently and as part of a cross-functional team., • Strong communication and critical thinking skills., • Safety certifications (e.g., Lockout/Tagout, Electrical Safety) are preferred., • Full-time position, standard day shift., • May require occasional off-hours or weekend support during unplanned equipment downtime., • Frequent standing, walking, climbing, kneeling, and lifting (up to 50 lbs.)., • Work environment includes manufacturing floor exposure to machinery, oils, noise, and occasionally confined spaces., • Required use of PPE in designated areas. Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. • 401(k), • 401(k) matching, • Dental insurance, • Employee assistance program, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Retirement plan, • Vision insurance

Job DescriptionJob Title: Mechanical Technician Are you a hard-working individual, looking for the opportunity to carve out a successful career in an organization where the spirit of family, ethics, good business practice and hard work share equal billing? If so, our ANDI group of companies may be a good place for you to find your niche! We are committed to rewarding skill, perseverance and a positive attitude with opportunities for growth. We are a multi-faceted enterprise involved in Sales, Service, Training, Certification, Equipment Fabrication, Equipment Installation, Maintenance and Repairs. The focus industry is Hyperbaric Chambers and Support Equipment. Intrigued? Read on to learn more! Required Skill Set : Aptitude for mechanical assembly and repairs. Small motors, compressors, oxygen concentrators and refrigerated dryers are among our products. Training is provided but the basic skill set is mandatory. Position Responsibilities: The Mechanical Technician is responsible for assembling and servicing various small machinery such as compressors & oxygen concentrators including assembling gas manifolds and other pneumatic plumbing assemblies as trained and directed. • Ensures accuracy of information in the system and compliance with internal controls., • Confirms adequate inventory for the production schedule., • Capable of providing technical support on the equipment systems that have been mastered. Qualifications& Knowledge Conduct: Highly motivated, positive and enthusiastic * Clean and Neat in appearance * Good interpersonal skills, and good listener and communicator * Process oriented * Eagerness to learn * Be a team player and always support the Company's goals * Being punctual and reliable is a must. * No smoking

Job Description About the Role: The CNC Maintenance Technician is responsible for maintaining, troubleshooting, and repairing CNC machining equipment to ensure maximum uptime and efficiency in a precision manufacturing environment. This role focuses on keeping advanced CNC machines and supporting systems operating at peak performance while meeting strict quality, safety, and regulatory standards. Ideal candidates bring hands-on experience with CNC machinery, preventive maintenance, and technical problem-solving within a regulated manufacturing setting. Responsibilities: * Perform preventive and corrective maintenance on CNC equipment, including mills, lathes, Swiss machines, and multi-axis systems. * Troubleshoot and repair mechanical, electrical, pneumatic, hydraulic, and control system issues affecting machine performance. * Maintain and service auxiliary equipment such as chip conveyors, coolant systems, and support utilities. * Install, commission, relocate, and modify CNC machines and related production equipment. * Document all maintenance activities in a computerized maintenance management system (CMMS), including service logs and parts usage. * Ensure compliance with ISO 13485, GMP, and internal quality and safety procedures. * Apply Lean manufacturing practices such as 5S, Kanban, and root cause analysis (RCA) to improve efficiency and reduce downtime. * Collaborate with production and engineering teams to resolve recurring equipment issues and implement process improvements. * Coordinate with OEMs, contractors, and service providers as needed for specialized support. * Participate in equipment-related safety audits, risk assessments, and incident investigations. Qualifications: * High school diploma or GED required; technical certification or associate degree preferred. * 3-5 years of experience maintaining and repairing CNC machinery in a manufacturing environment. * Strong knowledge of CNC control systems such as Fanuc, Okuma OSP, or equivalent platforms. * Hands-on experience in regulated industries with ISO 13485, GMP, or similar compliance standards. * Ability to read and interpret technical drawings, schematics, and service manuals. * Proficiency in using CMMS systems to track and document maintenance activities. * Strong mechanical and electrical troubleshooting skills with a focus on safety and reliability. * Basic computer skills, including Microsoft Excel, Word, and Outlook. Desired Qualifications: * OEM or technical training certifications in CNC maintenance or repair. * Experience supporting advanced CNC equipment such as 5-axis mills, Swiss machines, EDM, or laser systems. * Familiarity with facility utilities, HVAC, and support infrastructure. * Safety certifications such as Lockout/Tagout or Electrical Safety. * Proven ability to lead or contribute to continuous improvement initiatives in manufacturing environments.

Job Description Location: On-site - Hicksville, NY Who We Are: Nassau Candy is a premier importer, manufacturer, and distributor of specialty confections, fine foods, and promotional products. With decades of industry expertise, we take pride in providing high-quality products and exceptional service to retailers nationwide. Our commitment to innovation, integrity, and excellence has made us a leader in the industry. At Nassau Candy, we foster a collaborative and dynamic workplace where growth and teamwork are at the core of our success. Where You'll Come In: We are seeking a General Machinery / Manufacturing Mechanic to join our team at our Hicksville, NY location. This role is perfect for someone with hands-on experience in diagnosing and repairing industrial equipment and who enjoys problem-solving and maintaining machinery. The General Machinery / Manufacturing Mechanic will play a key role in ensuring the functionality of our manufacturing processes, contributing to our commitment to quality and efficiency. How You'll Make an Impact: Equipment Maintenance & Repair: • Diagnose and repair industrial and manufacturing equipment, including printers, conveyors, confectionery, and packaging machinery., • Troubleshoot mechanical issues effectively and implement timely solutions., • Maintain a clean, safe, and organized work environment, adhering to safety protocols., • Proven experience in diagnosing and repairing industrial / manufacturing equipment., • Familiarity with printers, conveyors, packaging and confectionery machinery., • Strong mechanical aptitude and problem-solving skills., • Ability to work independently and as part of a team to ensure all repairs and maintenance are performed to the highest standards, maintaining equipment integrity., • Detailed accuracy to identify and troubleshoot mechanical issues swiftly to minimize downtime., • Fluent or conversational Spanish (a plus). Why Join Nassau Candy? ???? Competitive Pay???? Comprehensive Benefits: Medical, Dental, Vision, AFLAC, Pet Insurance!???? Vacation & PTO???? 401(K) Retirement Plan???? Growth-oriented, entrepreneurial environment???? Family-Oriented Company Culture – Business casual attire, team collaboration???? Opportunity for advancement within a thriving Long Island company We are an Equal Opportunity Employer and value diversity in our workplace. If you’re ready to contribute to a dynamic team and take your career to the next level, we encourage you to apply!

Job Description iRocket is developing reusable, fully autonomous small launch vehicles to deliver more frequent, lower-cost access to space. We work across propulsion, structures, integration, and test domains, building toward an era of responsive launch systems. The Role: We are seeking a Manufacturing Technician to support the fabrication, assembly, and integration of structural and mechanical subassemblies for our rocket hardware. You’ll work closely with manufacturing and quality engineers to build reliable flight hardware in line with strict aerospace standards. • Manufacture and assemble flight hardware using methods such as drilling, fastening, bonding, and other mechanical processes, • Use precision calibrated tools (e.g. torque wrenches, micrometers, calipers), • Read and interpret technical drawings, blueprints, and work instructions, • Follow procedures, specifications, and test instructions to ensure hardware is built to design requirements, • Collaborate with manufacturing engineers and quality personnel to develop, refine, and document work instructions, • Ensure production tasks are completed on schedule, safely, and to the required quality, • High school diploma, GED, or equivalent work experience, • Strong communication and collaboration skills, • Ability to interact effectively (verbal and written) with engineering, production, and quality teams, • Experience in New Product Introduction (NPI) or development environments, • Precision drilling experience (tolerance ~ ±0.001 in), • Experience in aerospace, aviation, military, medical device, or other high-reliability industries, • Ability to read and interpret advanced technical drawings, manuals, and reports, • Proficient use of precision measuring instruments, • Experience working in cleanroom or controlled environments, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Hicksville, NY 18-month contract, potential for extension or conversion 2nd shift Packaging: 3pm-11:45pm 3rd Shift Packaging: 10:30pm - 7:15am Important that candidates are able to work on the 1st shift (6:45 a.m. – 3:30 p.m.) for 4 weeks to train. Then they will be assigned to the 2nd shift (3 p.m. – 11:45 p.m.) or the 3rd shift (10:30 p.m.- 7:15 p.m.) depending on their availability. Job Purpose Able to perform various inspecting, labelling and packaging operations. Tends machines that perform one or more packaging functions, such as packing, or bundling. Major Accountabilities • Handling of components on packaging line and monitors for defects., • Inspects filled container or package to ensure product is according to specifications., • May weigh finished products to detect missing components., • Clears line culls and documents all components discarded., • Prepares shippers, inspects finished product and packages into shipper. Seals, labels, and stacks shipper., • Fills cartons, carriers or shippers by hand with product, labels, literature or applicators., • Performs cleaning tasks on machine during or after machine operation., • Maintains compliance with SOPs, good documentation practices (GDP), training requirements, Company and safety policies and current Good Manufacturing Practices (cGMPs)., • Verifies correct lot code/exp. date on all pkg. components/finished goods., • Performs packaging line assignment maintaining line throughput and quality standards., • Contributes to the team by supporting other lines and roles as necessary to maintain operational efficiency., • Performs rework/re-inspection of components/finished goods with minimal conversation and focus on product defects., • Performs various housekeeping duties such as sweeping/mopping floor, cleaning equipment, fixtures, windows, and walls as needed., • Perform minor adjustment on the equipment and documents work performed., • Participates in training of new employees., • Adheres to all applicable procedures, cGMP’s, company policies, and all other quality or regulatory requirements (OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.)., • Ensures all work is performed in a safe, effective manner, and in compliance with the appropriate industry and regulatory (FDA, DEA, OSHA) standards, and Departmental, Plant, and Corporate quality and safety Behaviors. Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, employee requires training under OSHA’s HAZWOPER standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above-mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. Key Performance Indicators (knowledge, skills, and abilities expected of an associate to be effective in this role.) • Solid English reading/comprehension written and verbal communication skills required to understand and communicate to others detailed cGMPs, SOP's, FI’s, and production equipment cleaning instructions, • Basic mathematical skills and ability to work with numbers to accurately count components, waste and finished goods products., • Participate in Safety Program by complying with all and preventive measures (i.e., wearing Personal Protective Equipment (PPE)., • Alerts Supervision, Mechanics, Quality personnel to safety, quality and equipment performance problems when they occur., • Work on projects independently or in a team environment, actively participate on teams ex. (continuous improvement initiatives), • Perform key roles in a manner that promotes teamwork, is respectful of others and is aligned with behavior expectations., • Takes initiative and works autonomously to meet production requirements., • Continues to develop and learn new skills, which will allow for further advancement within the organization. Ideal Background Education: • High School Diploma or GED. Associates Degree preferred. Equivalent experience can be considered in lieu of HS Diploma Experience: • Minimum of one year production experience, • Ability to lift 30 lbs. and maintain a high level of physical activity

Under the direction of the VP of Manufacturing, The Plant Manager is responsible for all functions and results of the 24x5 in two building operations. The ideal candidate is a result oriented, Hands-On Manager with focus on continuous improvement driven by data. Additional attributes include energetic leadership qualities focused on safety, quality, cost, and happiness of associates. Prior pharmaceutical, nutraceutical or food processing plant managerial experience along with a passion and drive to lead and motivate a high-performance team are important. Responsible for adhering to the Safety Protocols, Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMPs) that are in effect for assuring the quality, quantity, and cost of product produced. Responsibilities: • Assure safe operations via review of procedures and training. Establish, communicate, implement, and enforce safety programs and procedures, • Develop tracking protocols for safety, quality and OEE to improve efficiency in the plant. Establish protocols to achieve the company’s short- and long-term objectives., • Generate and review, • Oversee plant operations and ensures compliance with federal and state regulations, • Monitors and enforces quality control standards., • Perform data analysis to identify areas of improvement, implement continuous improvement programs and monitor results on the production floor., • Schedule plant operation to meet quality and production plan at lowest cost possible., • Develops and/or approves all plant operating policies with approval from appropriate departments, • Direct, manage, and develop supervisory personnel to ensure and safe and efficient operation of the plant, • Modifies production and inventory control programs to maintain and enhance profitable operation of division, • Comply with and assure Good Manufacturing Practices (GMP) are followed, • Responsible for following City, State, and Federal codes and regulations including EPA and OSHA regulations and standards, • Manage associates by making self-available to staff, provide regular performance feedback, and develop subordinates' skills and encourage growth, • Additional duties as assigned Requirements: • Must comply with Safety protocols, GMP requirements; specific functions and documents will be discussed in GMP and on the job training, • Minimum Bachelor’s Degree: degree major in Engineering or Science is preferred, • 10 years’ management experience; Pharmaceutical/Dietary supplement industry is a plus, • Must have excellent verbal, written and interpersonal communication and organizational skills., • Demonstrated experience and desire for making operations run at ever improving levels of performance, • Ability to lead as well as work effectively in a team, • Demonstrated critical thinking and problem-solving skills, • Fluency in Spanish would be beneficial, but it is not a requirement We proudly offer: Medical, Dental, Vision, 401K with Company Match, Pet insurance and more! We reward the hard work of our team members with fun and exciting company events, Summer Picnic, Festive Packages, Holiday Celebrations, and associate referral bonuses! Founded in 2011, Piping Rock Health Products has gone on to win Long Island’s Top Workplaces Award 6 years in a row & securing the spot as Top Supplement Manufacturing Company 2024 by Food Business Review! Supported by a group of vitamin visionaries with over 40 years of industry experience and a carefully curated team of talented associates. Piping Rock is a global vitamin and supplement manufacturer with an unwavering commitment to creating quality wellness products. We believe that family always comes first, and that the dedication of our associates is the key ingredient to our success. We are drug free workplace, regulated by the FDA, required to follow Federal Guidelines; therefore in order to start as well as maintain employment, you must be able to successfully clear drug screening processes, which include testing for all illegal substances per Federal Guidelines. Piping Rock Health Products, INC is an Equal Opportunity Employer.

Job DescriptionJob Title: Quality Inspector Job Description The Quality Inspector will perform visual inspections of printed card assemblies and sub-assemblies. This role involves reviewing paperwork, completing computer entries, and reading and interpreting drawings and documents. The Quality Inspector will interface with the production line and visiting customers and will work in clean room environments. Responsibilities • Conduct visual inspections of printed card assemblies and sub-assemblies., • Review paperwork and complete computer entries accurately., • Read and interpret technical drawings and documents., • Interface with production line staff and visiting customers., • Ensure quality standards are met in clean room environments.Essential Skills, • Experience with inspection and precision measurement tools such as calipers., • Proficiency in quality inspection and control., • Ability to read blueprints and interpret workmanship specifications., • Knowledge of IPC-610 and J Standard., • Strong written and verbal communication skills.Additional Skills & Qualifications, • Keen attention to detail., • Basic computer and math skills to measure specifications., • Problem-solving and analytical skills., • Ability to use measuring devices such as gauges, meters, and computers., • JSTD-001 and IPC-610 certifications required., • MIL-STD experience preferred.Why Work Here? Enjoy great benefits and a permanent position with paid time off from day one. Work the first shift from 7:30 am to 5:15 pm in a supportive and professional environment. Work Environment The role offers a clean work environment, ensuring a comfortable and professional setting. You will work the first shift from 7:30 am to 5:15 pm. Job Type & Location This is a Permanent position based out of Uniondale, New York. Pay and Benefits The pay range for this position is $50000.00 - $60000.00/yr. • EOE/Disability/Veteran, • This position is onsite, • We offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays Workplace Type This is a fully onsite position in Uniondale,NY. Application Deadline This position is anticipated to close on Nov 11, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Mechanical Quality Inspector • As a Mechanical Inspector, you will be responsible for ensuring the quality and accuracy of our products through thorough inspections and analysis., • Utilize various measuring tools such as micrometers, calipers, and gauges to accurately measure dimensions., • Conduct visual inspections to identify any defects or abnormalities in the products., • Analyze test data and inspection results to identify trends or areas for improvement., • Collaborate with production teams to address any quality issues and implement corrective actions., • Conduct quality audits to ensure adherence to quality assurance (QA) and quality control (QC) procedures., • Document inspection findings, maintain accurate records, and prepare detailed reports for management review., • Performing and Approving the quality of raw materials before manufacturing begins., • Read and understand blueprints and specifications., • Accept or reject finished items, removing all products and materials that fail to meet specifications., • Discuss inspection results with those responsible for products. Report inspection and test data., • Responsible for incoming, in-process, and final inspection., • At least 2 years of work experience or related work experience required., • College degree or equivalent., • Must have the ability to identify and resolve problems, effectively manage change and deal with conflict in a fast-paced environment., • Able to perform First Article inspection in accordance with AS9100 in process and final inspection processes., • Must be able to comply with ITAR regulations., • Working knowledge of ISO 9001, 5S and/or Lean Manufacturing., • Knowledge of operating electronic inspection equipment, such as coordinate-measuring machines (CMMs) a plus., • Knowledge of MRP software systems and ERP system a plus., • Aerospace product knowledge a plus.Company DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job Description Schivo Medical, in Plainview , NY keeps the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and keep complex machines humming. Quality control inspector/ Operator Job Position Overview: Performs a variety Quality Control related tasks. Verifies components are produced to print and relate the results to appropriate personal. Prepares various paperwork. Inspect various inspection gages issued to production. Quality control inspector/ Operator Knowledge, Skills and Abilities: • Perform in-progress inspection for all machined components., • Review operator inspection reports and traveler information., • Submit reports to shift supervisor and communicate the results to machine operators., • Perform First Article Inspection for new parts (set ups), • Follows established departmental policies, procedures, and objectives, continuous quality improvement objectives, and safety, environmental, control standards., • Detail knowledge of inspection techniques, tools and methodology, • Working knowledge of GD &T, • Ability to read and interpret engineering drawings and blueprints, • Must possess the ability to use a wide variety of measuring devices to perform dimensional inspection of components produced., • Must be dependable and possess a willingness to learn new techniques., • Medical and Aerospace manufacturing experience with emphasis on FAIR, • Follow the quality standards of ISO-13485 Minimum Job Requirements & Education Associates or BS degree(s) from an accredited institution that are above the minimum education requirement may be substituted for experience on a year for year basis. Or High school diploma or GED; at least 2 years of experience that is directly related to the duties and responsibilities specified in a ISO-certified company . Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • EAP Program, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

CNC Machinist 3rd Class - 2nd Shift We are looking for a CNC Machinist to join our Target Rock team! As our CNC Machinist, you will be responsible for the operation of CNC machine tools within a given manufacturing department. You will perform these activities in compliance with Company procedures and quality requirements. Additionally, you will be able to check own production parts to maintain manufacturing processes and make offset adjustments as required working with supervision. Location: East Farmingdale, NY Hours: 5:30pm to 2:30am hourly rate: $29.54 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K Match I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Ability to operate machines within a given manufacturing department.\n, • Set-up machines for simple manufacturing operations.\n, • Responsible to maintain quality and productivity standards.\n, • Basic blueprint reading.\n, • Ability to use inspection equipment and inspect own work.\n, • Must be a US citizen\n, • High School Graduate or equivalent, shop mathematics and Trigonometry Skills.\n, • Two (2) years of manufacturing or related experience.\n, • General good housekeeping practices within work area.\n, • Maintain correct time reporting and accurate entries on applicable manufacturing documentation.\n, • Comply with Company quality and safety requirements.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-CM1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description Precipart. located in Farmingdale, NY, is looking to hire skilled and experienced Machinists to set up and operate CNC machines in our state-of-the-art facility featuring versatile machining capabilities, including: Lathe, Swiss Turning, Milling, Grinding, and Gear Cutting. We're looking for career focused Machinists with experience in any of these machining areas to help us craft high-quality components that support our customers in the medical, aerospace, space and industrial markets. Our machinists are the makers of cutting-edge components that will impact the lives of many. At Precipart, we engineer possible. From the needle on the first Gramophone, to helping mankind explore Mars, to pioneering parts for robotic surgery, we’ve helped propel the human race forward for five generations. With our unique combination of engineering, design and manufacturing expertise, we’ve worked with our clients to turn possibilities into possible. Join us in driving human progress through engineering! • Our Machinist career growth path has four distinct tiers, from Entry Level, Class C, Class B, to Class A. Each tier is designed to build upon your skills and experience, providing targeted development and increasing responsibilities to help you achieve your professional goals., • Our renovated facilities is equipped with state of the art equipment and is temperature controlled providing a comfortable environment that is focused on quality, safety and 5S., • We offer two work shifts, 1st (7:00am to 3:30pm) and 2nd shift (3:00pm to 11:30pm which includes a 10% shift differential)., • Set up and run up to two machines to fabricate precision parts, • Load and unload parts in the machine, • Start the machining cycle, • Inspect dimensions of finished pieces, • Change tooling as needed, • Hold tight tolerance of +/- .0002, • Experience setting up and operating CNC machines to fabricate precision components. We welcome candidates of all experience levels to apply. The hiring class and compensation for this role will be determined through our assessment process, taking into account your skills, experience, and qualifications. Additionally, the final level will be based on the business needs at the time of hire., • Should demonstrate interest and aptitude in this line of work, • Relevant technical Associate degree or CNC Machining certificate is preferred for candidates with minimal work experience, • Experience fabricating precision parts, • Experience working to very close tolerances (+/- .0002), • Experience with reading blue prints for mechanical components, • Experience inspecting parts and using inspection tools, • Good aptitude for shop math, • Experience with changing live tooling, • Able to work in a fast paced environment and meet production schedule, • Maintain a clean, organized and safe work area, • Able to stand for duration of shift and lift up to 40lbs WHAT WE'LL OFFER YOU IN RETURN:- • Base salary plus incentive program, • Paid time off, • Employee Referral Bonus, • Medical, dental, vision insurance, • Flexible Spending Account, • Health Savings Plan, • Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans, • 401k Profit sharing plan, • Tuition Assistance, • National Employee Assistance Program, • 529 College Savings Program, • Professional development and training, • Clean and organized workspace and manufacturing facilities, • Company events and outings Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • GD&T, • CNC Tooling, • Brake & Suspension Systems, • G-Code, • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Kitamura, Dmg Mori Seiki), • CNC Lathe (2-4 axis) (Mazak, Okuma, Doosan, Dmg Mori Seiki, Nakamura), • CNC Swiss Lathe (Star, Citizen, Tsugami, Tornos), • CNC Lathe (5+ axis) (Nakamura), • Gear Machinery (Fellows, Gleason) $20 - $46 / hr

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Bench Technicians/Electronic Assemblers. The suitable candidate should have some experience with mechanical, electrical assemblies, some soldering experience and should be familiar with basic test equipment. This position focuses on assembling electronic equipment such soldering wires onto switches and integrating the switches into metal housings as well as packaging the finished product. You will also be integrating circuit boards into enclosures, wiring them and final testing the equipment once completed the data must be entered into a data base so basic computer skills are required. Essential Requirements: • Strong work ethic, • Minimal soldering experience, • Basic knowledge of hand tools, • Mechanically inclined, • Follow assembly & test procedures, • Maintain a safe and organized work area, • Must be able to read a wiring diagram, • Document and submit all failures of equipment to engineering QA Department, • Maintain quality control on the production of all equipment assembled, • Ensure all company equipment and tools are in proper working condition, • Maintain manufacturing records of all products Education / Experience Requirements: Qualified candidates must have some education in digital electronics and can be entry level but 1+ year of electronics assembly work is preferred as well as basic soldering skills and the knowledge of electronic test equipment such as DVM's is required. Experience with Microsoft Office and Outlook is a plus. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Summary /Objective The Senior Technical Designer is a key member of the design team responsible for ensuring that design concepts are executed with precision, fit consistency, and adherence to brand standards. This role partners closely with Design, Product Development, and Sourcing to translate creative vision into production-ready garments. The Senior Technical Designer brings advanced technical knowledge, exceptional attention to detail, and the ability to mentor junior team members through example and expertise. The ideal candidate possesses a deep understanding of garment construction, fit, and patternmaking principles, and can clearly communicate design intent through detailed technical packages and fit comments. Position Responsibilities and Accountabilities: • Create detailed flat and technical sketches in Adobe Illustrator to accurately convey design and construction intent., • Clearly communicate pattern corrections during fittings and through written fit comments, including illustrated notes. While not responsible for patternmaking, must demonstrate a strong understanding of pattern adjustments and their impact on garment fit and construction., • Possess a solid understanding of grading principles for assigned classifications and effectively collaborate with Design to ensure accurate size consistency., • Develop comprehensive spec sheets within tech packs to define garment fit and measurements, ensuring all dimensions align with feasible pattern execution., • Create and maintain departmental tools—such as construction standards, block body spreadsheets, and fit reference materials—and distribute them to Design and Sourcing teams each season., • Partner with Design and Merchandising to align on fit and construction standards, supporting brand consistency and aesthetic integrity., • Maintain organized systems and templates (tech packs, tracking reports, block body spreadsheets, etc.) that support departmental efficiency and accuracy., • Collaborate closely with Design to interpret and clarify design intent, identify deviations from standards, and provide solutions that maintain brand integrity., • Lead proto, fit, and pre-production (PP) sample fittings with Design, providing fit direction, identifying deviations from brand aesthetics, and ensuring accurate execution through cutting, pinning, draping, and photo documentation., • Deliver detailed and visually supported fit comments, including annotated sketches created in Adobe Illustrator., • Participate in Work in Progress (WIP) meetings with clear talking points and reports to update cross-functional partners on style and fit status., • Demonstrate cross-team flexibility by supporting additional brand technical design teams as needed during lower-volume periods., • Build and maintain organized fit and construction libraries to ensure departmental consistency and efficiency. Qualifications and Competencies: • Adobe Illustrator Sketching, • Excel and Word, • Ability to communicate in writing clear and concise thoughts., • Knowledge of production and costing, • Basic textiles and fabric layout (engineering) knowledge, • Pattern Making, • Excellent verbal and written communication Education and Experience– • 5 years minimum related experience to working with patterns and design teams., • 3 years’ experience with Adobe Illustrator- this is mandatory. Candidate must be fluent and fast with sketching., • Experience illustrating pattern corrections using drawing software., • Experience using excel and word- formula knowledge a must., • Bachelors of Science preferred or equivalent manufacturing experience and/or working with a design team to execute design intent.

Job DescriptionJob Title: Mechanic Job Description We are seeking a skilled Mechanic to perform routine inspections and preventative maintenance checks on building systems, including HVAC units, plumbing fixtures, electrical panels, and fire safety equipment. You will ensure optimal production efficiency by maintaining and repairing manufacturing equipment and vacuum systems, diagnosing mechanical issues, and implementing corrective actions. Responsibilities • Conduct routine inspections and preventative maintenance checks on building systems, including HVAC units, plumbing fixtures, electrical panels, and fire safety equipment., • Perform scheduled lubrication and filter changes on machinery., • Perform routine maintenance and repairs on all manufacturing equipment and vacuum systems., • Troubleshoot mechanical issues, diagnose root causes, and implement corrective actions., • Conduct preventative maintenance tasks according to established schedules, including lubrication, cleaning, and inspections., • Read and interpret technical drawings, schematics, and maintenance manuals to understand equipment operation and repair procedures.Essential Skills, • Troubleshooting skills, • Mechanical and electrical knowledge, • Experience with pneumatics and preventive maintenance, • Ability to read blueprints and schematics, • Hydraulic systems understanding, • Experience as a maintenance technicianAdditional Skills & Qualifications, • High school diploma or equivalent experience repairing pumps and industrial machinery, • Proficiency with hand/power tools and diagnostic equipment, • Ability to read technical manuals, • Basic knowledge of pneumatic, vacuum, HVAC, plumbing, and electrical systems, • Strong problem-solving skills and attention to detailWhy Work Here? Enjoy a unique 9/80 work schedule, allowing for a three-day weekend every other week. Benefit from paid holidays, a comprehensive benefits package including health, dental, and vision insurance, life insurance, and short and long-term disability. Enjoy flexible spending options and a 401K plan. Take advantage of paid time off, including vacation, sick leave, and a whole week off between Christmas and New Year’s that doesn’t count against your PTO. Participate in multiple company events and awards throughout the year. Work with a team that values long-term employees and offers opportunities for internal growth. Work Environment Work onsite in a casual attire environment, where lab coats are provided to wear over your clothes. The company is an electronics manufacturer of satellite communication systems for the aerospace, space, and defense industry, located in Uniondale, NY. The team includes over 200 engineers and manufacturing personnel. Working hours are from 7:30 am to 5:15 pm, with every other Friday off. Job Type & Location This is a Permanent position based out of Uniondale, New York. Pay and Benefits The pay range for this position is $75000.00 - $90000.00/yr. 9/80 work weeks. Employees complete 80 hours of week in 9 days and have every other Friday off (three day weekend every other weekend) Company provides contractors with paid holidays (matching internal employee holidays) after 30 days Company is located near public transportation EOE/Disability/Veteran This position is onsite They offer a comprehensive benefit package including: Health Insurance, Dental and Vision, Life Insurance, Short and Long-Term Disability. Flexible spending option and 401K. We also offer paid time off including: Vacation, Sick and Paid Holidays Whole week off between Christmas and New Years that doesn't come out of PTO Multiple company events/awards throughout the year Lot of long term employees with a lot of internal growth Workplace Type This is a fully onsite position in Uniondale,NY. Application Deadline This position is anticipated to close on Nov 5, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Manufacturing Engineer (Medical Device Manufacturing, Process Engineering, Continuous Improvement) About the Role: This Manufacturing Engineer position offers the opportunity to play a key role in the production of advanced medical devices and precision-engineered components. The role focuses on optimizing manufacturing processes, enhancing production efficiency, and ensuring product quality in a regulated environment. The Manufacturing Engineer will collaborate across engineering, operations, and quality teams to develop, implement, and continuously improve processes that meet industry standards and safety requirements. Responsibilities: * Design, implement, and optimize manufacturing processes to improve efficiency, quality, and safety. * Develop and validate automated and manual production systems to ensure repeatable and compliant outcomes. * Evaluate manufacturing performance using metrics such as throughput, yield, and cost efficiency. * Provide accurate cost estimates for new and existing projects, supporting pricing and resource planning. * Plan and improve factory layouts, material flow, and equipment utilization for optimal productivity. * Collaborate with cross-functional teams to troubleshoot issues, resolve production bottlenecks, and reduce waste. * Train operators and technicians on new equipment, tooling, and process updates. * Maintain compliance with ISO, FDA, and environmental health and safety standards. * Research and recommend new technologies to advance manufacturing capabilities. * Lead or assist with continuous improvement initiatives and lean manufacturing projects. Qualifications: * Minimum of 5 years of experience as a Manufacturing Engineer or in a related role within a regulated manufacturing environment. * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related field. * Strong knowledge of manufacturing processes, CNC machining, tooling design, and fabrication methods. * Proficiency with CAD software and Microsoft Office Suite. * Proven project management and process improvement experience. * Excellent problem-solving skills and a data-driven approach to decision-making. * Familiarity with quality systems, statistical process control, and root cause analysis. * Commitment to maintaining high safety, quality, and environmental standards. Desired Qualifications: * Green Belt or Lean Six Sigma certification. * Hands-on experience with continuous improvement methodologies and lean manufacturing tools. * Knowledge of medical device manufacturing standards and regulatory compliance. * Experience leading cross-functional teams in a fast-paced production environment. * Strong communication and collaboration skills across departments. (Must be authorized to work in the United States. Sponsorship is not available for this role.)

Job Description Power-Flo Technologies is an electrical equipment manufacturer capable of taking on complete switchgear projects. We are looking for you to join our collaborative team as a Switchgear Quotations Specialist. This is a full-time role at our New Hyde Park, NY office. Salary Range: $19 - $24/hour Benefits • Health Insurance Plans (medical, dental, vision), • PTO Program and Paid Holidays Switchgear Quotations Specialist and Project Coordinator Responsibilities • Quote and manage small switchgear and control panel projects from start to finish, • Prepare accurate and detailed project quotations and securing pricing for bids, • Manage customer accounts ensuring accuracy, • Upload service tickets and job cards to Excel based job tracking sheet, • Review job and parts order status, • Enter Bill of Materials for jobs, • File service tickets, invoices, and packing slips, • Establish and maintain relationships with customers and vendors providing best in class customer service, • Communicate with clients professionally and respond to all inquiries promptly, • Resolve any issues or delays, • Oversee several aspects of a project at the same time, • Follow-up with contractors and internal teams, • Manage freight damage claims Switchgear Quotations Specialist and Project Coordinator Qualifications • Sales oriented, self-starter who is willing and eager to gain product and service knowledge, • Aptitude for learning, • Strong customer service skills, • Ability to negotiate, solve problems, and close with customers, • Strong verbal and written communication skills, including phone and email, • Ability to prioritize work and handle multiple tasks simultaneously in a fast paced, diverse, and growth-oriented environment, • Ability to work under tight deadlines, • Strong mathematical and analytical skills, • Demonstrated ability to communicate clearly in written and verbal formats, • Proven proficiency in general personal computer applications, as well as in the use of Microsoft Office software, including Word and Excel, • Ability to work well both in a team environment and independently, • Valid driver’s license to operate company vehicles as needed Physical Requirements • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, computer mouse, adding machine, and telephone for prolonged periods of time, • You will be in a production/manufacturing/warehouse environment daily Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job DescriptionTop Job Located in Freeport, NY Salary: $25.00 Job Functions: • Assist in problem solving with company software., • Preventative Maintenance Management: Schedule and log preventative maintenance tasks, order required fluids and parts, and maintain related spreadsheets. Ensure upkeep of cutting fluids and gear-cutting hob maintenance., • Tooling and Consumables Management: Monitor stock of drills, endmills, and other common tools. Implement and sustain Kanban stocking methods to ensure availability and reduce downtime., • Job Entry and Administrative Support: Create jobs in ERP, prepare travelers, prints, and inspection reports, and issue order acknowledgments using established templates. Maintain organized Excel spreadsheets and support company software problem solving., • Purchase Order and Vendor Tracking: Track delivery status for outsourced components and outside services, coordinating with vendors to ensure timely completion., • Shop Scheduling and Tasking: Assist with basic scheduling by physically moving jobs to designated work centers and helping assign weekend crew tasks to maintain production flow., • Fixture and Process Support: Provide assistance with simple fixture designs and collaborate with engineering on straightforward process improvements., • Material Management: Support inventory accuracy through periodic counts, audits, and reconciliation of materials., • Create and issue Purchase Orders for third party services and consumable goods Knowledge and Skills Required: • Strong computer proficiency, especially in Microsoft Excel, • Ability to read and follow written and verbal instructions with accuracy., • Strong organizational skills with attention to detail in recordkeeping, logs, and inventory management., • Effective communication and interpersonal skills for cross‑department collaboration., • Willingness to learn new systems and proactively solve problems in a dynamic environment. Preferred knowledge and skills but not required • Familiarity with Lean Manufacturing and Six Sigma practices, • Experience with ERP systems like Jobboss and Prophet 21, • Previous experience in a machine shop supervisory role, • Certification in machining or manufacturing technology ##2127OS Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

Job Description Company Overview: Schivo Medical in Plainview NY, designs, develops and manufactures a diverse range of essential medical technology solutions.Schivo Medical is seeking to hire a planner to work in the supply chain division. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. By joining the team, you will be part of a company committed to helping you build a fulfilling and a rewarding career. Planner Job Overview: Reporting directly to the Supply Chain Manager, this role will be responsible for the cost-effective management and supply of assigned materials and components across a global supply base, while ensuring the availability of materials in line with planned requirements. This role will work closely with Production, Planning, Warehouse, Engineering, QA and QC. Planner Essential Duties and Responsibilities: • Proven track record in interpreting customer demand and production schedules in complex volume manufacturing environments, from single piece parts to multi-level assemblies, • Must be detail orientated with the ability to prioritize and organize tasks to deliver on business objectives within a fast-paced environment, • Have a proven ability to respond well to change and maintaining flexibility while focusing of key objectives, • Must be able to work on their own initiative with strong problem solving and decision-making abilities, while also working as part of a multi-function team, • Managing, analyzing, and actioning customer forecast data, • Managing supply of materials into the plant while ensuring a high standard of customer service and without disruption to the production plan, • Creating purchase orders within ERP system and ensuring these are kept up to date to allow for accuracy of information flow to Production and Planning, • Continual communication with internal customers to ensure daily material availability for operational areas of the business, • Highlight any major external supply issues in a timely manner to ensure focus on resolution within the Supply Chain team, • Identify and drive cost reductions on a continual basis, • Support and manage supply chain KPIs, • Ensuring all quality and GMP standards are met, • To perform additional team tasks as required to support the effective running of the business Planners Necessary Education, Skills, and Competencies (including licensing and certifications): • Qualified to a minimum of degree level or equivalent work experience, • At least 3 years’ relevant experience in a volume manufacturing environment, preferably in a medical device or highly regulated manufacturing environment, • Must have ERP systems experience with SAP, or equivalent ERP system, • Must be highly computer literate in Excel and Microsoft office packages, • Excellent communication skills, both written and oral essential Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • EAP Program, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Join the Canali Family as we open in Belmont Park Village (Elmont, NY ) Company Description Canali is a family-run Italian luxury brand that has been delivering tailor-made elegance for 90 years. With a focus on the values of Made in Italy excellence, Canali combines artisanal know-how with innovative design to create sartorial masterpieces. Their meticulous attention to detail and use of premium fabrics result in exceptional wearability and comfort. As a modern-day design and manufacturing group, Canali has its own production centers in Italy and a global presence with boutiques and retail stores in over 100 countries. Role Description We are looking for experienced, passionate Client Advisors to join our newest location at Belmont Park Village in Elmont New York. Our Client Advisors will be responsible for providing a personalized experience to customers, assisting them in finding the perfect tailored clothing, contemporary sportswear and accessories. They will also handle sales transactions, maintain store appearance, and contribute to the overall success of the boutique through exceptional customer service. Qualifications • Strong interpersonal and communication skills, • Experience in luxury retail or menswear fashion a plus, • A passion for delivering exceptional customer service, • Ability to build and maintain customer relationships, • Knowledge of current fashion trends and styles, • Attention to detail and a keen eye for aesthetics, • Ability to work in a fast-paced and dynamic environment, • Fluency in other languages is a plus

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Free uniforms, • Health insurance, • Develop detailed technical drawings and specifications for retail window displays and pop ups., • Ensure that all project builds are designed with Health and Safety at the forefront of your mind., • Providing Build Drawings and CNC files., • Liaising with Project Managers on project requirements and deadlines.- Work closely with the Production Team to ensure that designs can be efficiently and accurately produced. • Conduct regular quality checks on prototypes and final products to verify accuracy and adherence to design specifications., • Participate in meetings with clients to present technical drawings and discuss project requirements. • Work closely with the design team whilst designing a project for a client. Ensuring that what is designed is achievable in project guidelines, budgets and timelines - whilst also thinking about whats best for the client., • Identify opportunities to streamline processes, improve efficiency, and enhance the overall quality of drafting work., • Proactively seek feedback and implement best practices to support ongoing learning and professional development.Qualifications: • 5+ years of experience in technical drafting for retail window displays and pop ups., • Must use SolidWorks or Inventor, • Proficiency in CAD software such as SolidWorks or Rhino., • Strong understanding of manufacturing processes and materials. • Excellent management skills with the ability to prioritize tasks and meet deadlines., • Detail-oriented mindset with a focus on quality assurance and continuous improvement.- Strong communication and interpersonal skills to collaborate effectively with cross-functional teams. • Ability to problem solve and troubleshoot technical issues as they arise., • Knowledge of health and safety regulations in the retail industry. If you have a passion for creative design and a strong technical background, we invite you to apply for this exciting opportunity to lead a dynamic team in designing innovative retail displays.

Job DescriptionMake Every Machine Run Better — Every Shift Step onto the production floor and start your day with a walk-through: checking HVAC units, plumbing fixtures, electrical panels, and fire safety equipment. Then move to scheduled lubrication and filter changes before answering a call to troubleshoot a vacuum system that keeps throughput humming. From diagnosing pump issues by sound and data, to replacing bearings, belts, gears, and seals, you keep complex equipment in top shape and the operation on schedule. What You Will Tackle • Execute routine inspections and preventative maintenance across building and production systems, including HVAC, plumbing, electrical panels, and fire protection., • Perform scheduled lubrication, filter changes, cleaning, and detailed inspections to prevent failures., • Maintain and repair manufacturing equipment and vacuum systems to maximize uptime and efficiency., • Troubleshoot mechanical issues by analyzing symptoms, sounds, and operational data; isolate root causes and implement corrective actions., • Disassemble and reassemble machinery to access components; replace worn parts such as bearings, belts, gears, and seals., • Adjust and align equipment to restore optimal performance and repeatability., • Repair and maintain pneumatic and basic electrical systems as needed., • Diagnose and correct malfunctions in plumbing, electrical, HVAC, and other facility components; complete minor building repairs (leaks, light bulbs, minor electrical, drywall, basic carpentry)., • Respond promptly to maintenance work orders and keep thorough maintenance records and reports., • Read and interpret technical drawings, schematics, and maintenance manuals to plan effective repairs. Safety First, Always, • Follow all safety procedures and machine guarding practices., • Conduct machine safety inspections and report hazards immediately., • High School Diploma or equivalent., • Proven experience as a manufacturing mechanic or similar role., • Strong mechanical aptitude; able to read blueprints, schematics, and technical manuals., • Skilled with hand tools, power tools, and precision measuring instruments., • Working knowledge of electrical, vacuum, and pneumatic systems., • Independent problem-solver who collaborates well on a team. Physical Realities & Work Environment, • Lift heavy objects; bend, climb, and stand for extended periods., • Manual dexterity for small parts and tools., • Industrial manufacturing environment with noise, dust, and grease., • Position is ON SITE. Tools and Technologies You Will Use, • CNC Mill 3-4 axis VMC (Fanuc, Bridgeport, Mazak, Haas), • CNC Lathe 2-4 axis, • SMT Machine (Fuji, Mydata), • Wire Bonding Machine, • Packaging Machines, • Coordinate Measuring Machine CMM (Faro), • Servo Motors, • Cylindrical Grinder Machine, • Manufacturing Execution Systems MES, • Cable Tray Core Proficiencies, • Mechanical troubleshooting, • Electrical repair, • Relay testing, • Pneumatics troubleshooting EOE/Disability/Veteran

Job Description Join Precipart in Farmingdale, NY, as a talented CNC Equipment Specialist. We seek individuals with expertise in setting up and operating cutting-edge CNC machinery such as Lathes, Swiss Turning, Milling machines, Grinders, and Gear Cutting tools. Our state-of-the-art facility caters to industries like medical, aerospace, and industrial markets. You'll be part of a team that fabricates top-tier components that advance human progress. Our machining journey spans generations, from creating the first Gramophone needle to contributing to Mars exploration. Be part of our legacy of turning ideas into reality with engineering excellence. • Career Path: Navigate your professional journey from Entry Level up to Class A, with structured growth designed to hone your skills and responsibilities., • Work where quality and safety converge in our temperature-controlled facilities., • Flexible work shifts: 1st (7:00am to 3:30pm) and 2nd (3:00pm to 11:30pm) with added shift differential., • Relocation bonus for those moving to the area. Responsibilities, • Handle and operate up to two machines, ensuring precision fabrication., • Engage in loading, unloading, and initiating the machining cycles., • Inspect and verify the dimensions of finished products., • Adjust tooling to ensure tight tolerance of +/- .0002., • Demonstrable experience with CNC machine setup and operations for precision tasks. We encourage applicants at all experience levels., • Technical flair and a keen interest in machining., • Desirable: Technical Associate Degree or CNC certification for less experienced individuals., • Proficient in fabricating meticulously precise components., • Accustomed to working with minimal tolerances (+/- .0002)., • Blueprint reading proficiency., • Skilled in inspection tool utilization., • Solid foundation in shop math and live tooling., • Ability to thrive in a dynamic production environment., • Fosters a clean, organized, and safe workspace., • Physical capability to stand for long periods and lift up to 40 lbs., • Incentive program complementing base salary., • Comprehensive insurance packages including medical, dental, and vision., • Financial wellness through 401k, profit sharing, and tuition assistance., • Career development and a positive, organized workspace. Proficiency in: • GD&T, • CNC Tools & Technologies, • Production Cycle Management, • Precision Blueprint Interpretation

Job Description CNC Machinist – First Class Location: Farmingdale, NY Company: Superior Motion Controls Position Summary: Superior Motion Controls is seeking a First-Class CNC Machinist to join our precision-driven metal manufacturing team. This role is ideal for a seasoned professional who thrives in a fast-paced, quality-focused environment and brings deep expertise in the setup, operation, and optimization of CNC machining centers. Primary Responsibilities: • Set up, program, and operate vertical CNC machining centers to produce precision components per engineering specifications and drawings., • Read and interpret complex blueprints, GD&T specifications, and setup sheets with minimal supervision., • Perform first-piece inspections and make machine adjustments to ensure adherence to tight tolerances., • Select appropriate tools, fixtures, speeds, and feeds to optimize productivity and part quality., • Conduct routine maintenance and troubleshooting of equipment to ensure optimal machine performance., • Maintain documentation and records for production runs, tool usage, and machine setup parameters., • Collaborate with engineering, quality assurance, and production teams to improve machining processes and resolve technical challenges. Qualifications and Experience: • Minimum 10 years of continuous hands-on experience in a CNC machining environment, with demonstrated expertise in setup and operation., • Proficient in the use of precision measurement instruments including micrometers, calipers, height gauges, and dial indicators., • Strong understanding of metal material properties (e.g., aluminum, steel, inconel, tool steel) and cutting tool technology., • Demonstrated ability to work independently with minimal oversight while consistently delivering high-quality results., • Ability to sit/stand at a CNC workstation for extended periods., • Capability to lift up to 40 lbs as needed., • Must be physically able to navigate the warehouse and access inventory at various heights.

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details:

Job Description If you know the sound of a spindle, the smell of cutting oil, and the satisfaction of fixing a machine that others cannot, you will fit right in at Schivo Medical. We keep the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and keep complex machines humming. Shift hours:4pm to 1:30am* (Plus 20 percent night differential) CNC Machine Operator Position Overview: Operate CNC Machine Operator and inspect finished parts. Necessary Education, Skills, and Competencies (including licensing and certifications): • 2-4 years’ experience with lathe/mill turning machines or trade school cnc certificate., • Experience using the Fanuc control preferred., • Working knowledge of various materials & tools (inserts, endmills, drills Etc.), • Ability to work independently with minimal supervision., • Good communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques., • mechanically inclined, • Mechanical aptitude: A strong understanding of mechanical principles., • Attention to detail: The ability to work with tight tolerances where precision is critical., • Technical knowledge: The ability to read blueprints and specifications and basic knowledge of G-code programming or CAD/CAM software., • Problem-solving: The ability to troubleshoot issues and make necessary adjustments., • Safety consciousness: Adherence to all safety guidelines and protocols., • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • 401(k), • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • Life Insurance, • Short/Long disability, • Employee referral program, • EAP program, • Employee discounts, • Summer and holiday events Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. "No sponsorship to work in the United States"

Job Description iRocket is developing fully autonomous, fully reusable small launch vehicles to provide responsive, cost-effective access to space. Our mission is to catalyze a new era of space exploration through innovation in propulsion, structures, and sustainable launch systems. The Role: We are seeking a Mechanical Engineer to contribute to the design, development, and transition of mechanical components and systems from development through production. You’ll partner with propulsion, manufacturing, integration, and test teams to help deliver high-performance, reliable rocket hardware. • Act as Responsible Engineer for key subsystems or components (e.g., valves, mechanical assemblies), • Advance design of parts and assemblies: create CAD models, drawings, and associated documentation, • Perform mechanical analyses, calculations, and design iterations to meet performance, mass, and reliability targets, • Collaborate with manufacturing teams to ensure designs are manufacturable, and iterate designs based on feedback, • Support fabrication, post-processing, inspection, and tolerance verification of parts, • Assist with integration, assembly, and test of mechanical and propulsion subsystems, • Create schematics, document design and manufacturing processes, and maintain records, • Participate in test campaigns, support troubleshooting, and analyze results, • Communicate progress, issues, and tradeoffs clearly across cross-functional teams, • Ensure safe practices and adherence to PPE and safety standards in lab, shop, and test areas Requirements • Bachelor’s degree in Mechanical Engineering or a related engineering discipline, • 3+ years of experience in mechanical design, development, fabrication, assembly, or test, • Proficiency in CAD, • Knowledge of GD&T, tolerance design, part and assembly drawings, • Strong problem solving, analytical thinking, and collaboration skills, • Excellent written and verbal communication skills, • Ability to manage multiple tasks in a fast-paced environment, • Experience in aerospace, propulsion, or high-reliability systems, • Hands-on engineering background (design to bench to manufacturing), • Experience with simulation or analysis tools (e.g. ANSYS, FEA), • Experience scripting or using tools such as MATLAB or Python, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Senior Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Senior Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 10 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Senior Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Develop and mentor Junior engineers, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description An established and leading Precision Timing & Frequency Technology Firm are looking for a Maintenance Technician The Maintenance Technician will be responsible for maintaining and repairing industrial machinery within a production facility, including performing preventative maintenance, troubleshooting malfunctions, replacing worn parts, and ensuring equipment operates efficiently, often requiring proficiency with hand tools, power tools, and technical manuals; often working in a fast-paced environment with safety regulations to adhere to. Responsibilities: • Conduct routine inspections and preventative maintenance checks on building systems, including HVAC units, plumbing fixtures, electrical panels, and fire safety equipment., • Perform scheduled lubrication and filter changes on machinery., • Perform routine maintenance and repairs on all manufacturing equipment and vacuum system to ensure optimal production efficiency and uptime., • Troubleshoot mechanical issues, diagnose root causes, and implement corrective actions., • Conduct preventative maintenance tasks according to established schedules, including lubrication, cleaning, and inspections., • Read and interpret technical drawings, schematics, and maintenance manuals to understand equipment operation and repair procedures. Essential Duties and Responsibilities: Maintenance and Repair: • Follow established preventative maintenance schedules to proactively address potential issues., • Conduct routine inspections of machinery for wear and tear, potential hazards, and lubrication levels., • Maintain detailed maintenance records and reports. Troubleshooting: • Identify and diagnose mechanical issues by, • Disassemble and reassemble machinery to access components for repair., • Replace worn or damaged parts, including bearings, belts, gears, and seals., • Perform adjustments and alignments on machinery to ensure proper functionality., • Repair and maintain pneumatic, electrical systems as needed., • Diagnose and troubleshoot malfunctions in plumbing, electrical, HVAC systems, and other building components., • Perform minor repairs including fixing leaky faucets, replacing light bulbs, repairing minor electrical issues, patching drywall, and fixing minor carpentry issues., • Respond to maintenance work orders and complete repairs promptly. Preventative Maintenance: analyzing symptoms, sounds, and operational data., • Use troubleshooting techniques to isolate problems and determine necessary repairs. Safety Compliance: • Adhere to all safety protocols and procedures while working on machinery., • Report any safety concerns or hazards immediately., • Wear appropriate personal protective equipment (PPE) as required. Qualifications: • High School Diploma or equivalent, • Proven experience as a manufacturing mechanic or related role, • Strong mechanical aptitude and ability to read blueprints and technical manuals, • Proficiency with hand tools, power tools, and measuring instruments, • Basic understanding of electrical, vacuum and pneumatic systems, • Ability to work independently and as part of a team MUST HAVE MECHANICAL BACKGROUND IN REPAIRING PUMPS AND VARIOUS MACHINE Physical Demands: • Ability to lift heavy objects, bend, climb, and stand for extended periods., • Manual dexterity to handle small parts and tools., • Must have knowledge of basis of Vacuum system as well Plumbing, HVAC and Electricity Work Environment: Industrial manufacturing facility with exposure to noise, dust, and grease. Great Culture and Awesome work environment Comprehensive Benefits Package: They offer a comprehensive benefit package including : Health Insurance, Vision and Dental, Life Insurance, Short and Long Term Disability. Flexible spending options and 401K. They also offer a very lucrative paid time off policy as well as 11 paid Holidays.

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard.\n, • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes.\n, • Implement and drive continuous improvement activities through implementation of change management process and best practices.\n, • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed.\n, • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality.\n, • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed.\n, • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management.\n, • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company.\n, • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework.\n, • Author annual performance reviews and develop continuing education and advancement paths for entire department.\n Required Skills and Abilities: \n • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities.\n, • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities.\n, • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others\n, • Excellent verbal and written communication skills; fluency in Spanish is preferred.\n, • Experience with MRP systems; preferably Oracle.\n, • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint.\n, • Willingness to work a flexible schedule to get the job done.\n, • Exceptional communication skills; promoting teamwork and a positive work environment.\n, • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries.\n, • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma.\n, • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills.\n Education and Experience: \n • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred.\n, • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs.\n, • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred.\n\n Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder\n Physical Requirements: • None\n Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

Position Summary: The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. Supervisory Responsibilties: • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department. Required Skills and Abilities: • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills. Education and Experience: • Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Physical Requirements: • None Compensation Employee Type: Salaried Salary Minimum: $175,000 Salary Maximum: $195,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None Duties and Responsibilities: • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods., • Design, install, and troubleshoot manufacturing equipment., • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts., • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements., • Design layout of equipment or workspaces to achieve maximum efficiency., • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures., • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing, • Provide technical expertise or support related to manufacturing., • Develop, document and implement standard work instructions for critical manufacturing operations. Required Skills and Abilities: • Excellent people and communication skills are required (both oral and written)., • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office., • Able to work under pressure, • Highly technical and analytical skills such (drawings, schematics, layout), • Able to think out of box., • Project management skills, • Highly organized and efficient, • Possess leadership and interpersonal skills, • Strong problem-solving skills Education and Experience: • Bachelor's degree in Industrial Engineering, • 3-5 years of progressive experience in manufacturing engineering., • Experience in metal fabrication, welding and/or brazing of pressure containing products., • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar., • Due to ITAR Restrictions, an export license may be required. Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Manufacturing Engineer We are looking for a Manufacturing Engineer to join our Target Rock team! As our Manufacturing Engineer, you will interact with and support the machine shop production and personnel. The individual receives direction from the Plant or Manufacturing Engineering Manager or the Senior Manufacturing Engineer regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements with minimum supervision. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $72,700 to $90,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets and Operation Sketches to support all phases of manufacturing within the facility. \n, • Designs necessary tooling and fixtures required to support manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • Five (5) years minimum experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Basic knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job DescriptionTop Job Located in Hicksville, NY Salary: 19.00 We are seeking a Warehouse Assembler to become an integral part of our team! You will perform assembly line tasks as well as identify areas of improvement to increase efficiency.The shift is M-F 7am-3:30pm, previous wiring experience is REQUIRED. Responsibilities: • Work with a team to assemble entire products or components, • Rotate through tasks for specific production processes, • Conduct quality inspections on products and parts, • Prepare finished products for shipment, • Previous experience in manufacturing, assembly, or other related fields, • Familiarity with assembly tools and equipment, • Ability to handle physical workload, • Ability to work well in teams, • Ability to thrive in a fast-paced environment #2127LI Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

We have a rewarding opportunity for a Manual Machinist Trainee to join our Target Rock team in East Farmingdale, NY! The Machinist Trainee is responsible to successfully complete the training for the operation of the manual lathes, mills (Bridgeport), honing machines, and any other manual machines as seen fit by Operations Management. The individual shall train to perform these activities in compliance with Company procedures and quality requirements. The individual will be trained to check their own production parts and to operate manufacturing processes and make adjustment as required while working with supervisors. Location: East Farmingdale, NY Salary Information: $ 27.01 - $28.91 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Care About Our People Paid Time Off I 401K Match I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture Your Challenge: \n No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Position Summary: The Manufacturing Engineer will plan and design product applications and machinery. The position is responsible for organizing highly complex activities for design, development, implementation, and maintenance of heat exchanger manufacturing processes. Supervisory Responsibilities: • None\n Duties and Responsibilities: \n • Apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness, including determining root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods.\n, • Design, install, and troubleshoot manufacturing equipment.\n, • Identify opportunities and implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, assembly methods, quality control standards, or product design, materials and parts.\n, • Design testing methods and test finished products or process capabilities to establish standards or validate process requirements.\n, • Design layout of equipment or workspaces to achieve maximum efficiency.\n, • Review product designs for manufacturability or completeness; including purchasing equipment, materials, or parts and preparing documentation for new manufacturing processes or engineering procedures.\n, • Evaluate manufactured products according to specifications and quality standards, including troubleshooting new or existing product problems involving designs, materials, or processes\n, • Develop sustainable manufacturing technologies and analyze the financial impacts of sustainable manufacturing\n, • Provide technical expertise or support related to manufacturing.\n, • Develop, document and implement standard work instructions for critical manufacturing operations.\n\n Required Skills and Abilities: \n • Excellent people and communication skills are required (both oral and written).\n, • Strong interpersonal skills requiring the ability to resolve conflicting interests and obtain cooperation\n, • Computer literacy in a MRP system (Oracle a plus), Microsoft Office.\n, • Able to work under pressure\n, • Highly technical and analytical skills such (drawings, schematics, layout)\n, • Able to think out of box.\n, • Project management skills\n, • Highly organized and efficient\n, • Possess leadership and interpersonal skills\n, • Strong problem-solving skills\n\n Education and Experience: \n • Bachelor's degree in Industrial Engineering\n, • 3-5 years of progressive experience in manufacturing engineering.\n, • Experience in metal fabrication, welding and/or brazing of pressure containing products.\n, • Experience in a highly regulated industry, such as, Military, Aerospace, Nuclear or Automotive or other similar.\n, • Due to ITAR Restrictions, an export license may be required.\n\n Other • Due to contracts with the United States Government, the candidate must be either a US Citizen or Green card holder Compensation Employee Type: Salaried Salary Minimum: $85,000 Salary Maximum: $105,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Summary: To perform assigned machining operations using all applicable occupational skills with an absolute minimum of supervision and with an extremely high degree of competence. Essential Duties & Responsibilities: \n • Performs complex and intricate machine and assembly operations to production standards.\n, • Produces simple sketches describing order of machining operations, when required.\n, • Sets up, programs and operates automatic, semi-automatic and manual machine equipment including milling, lathe, punch press, drill press, grinders, shears, saws and related equipment necessary for the maching and manufacture of chassis, racks, consoles, brackets, terminal boards, printed circuit boards, panels, welding, sheet metal, repair rework, etc.\n, • Records and maintains data, as required.\n, • Works from complicated drawings, operation sheets, assembly procedures, material specifications and processes, sketches, verbal instructions, etc.\n, • Knowledge of applicable Company and military specifications.\n, • Capable of being certified to Company standards.\n, • Works to extremely close tolerances with all types of machine tools.\n, • Thorough knowledge of required shop mathematics.\n, • Reads and interprets complex blueprints.\n, • Determines type of machines and required sequences of operations.\n, • Capable of drilling, pinning, riveting and assembly operations.\n, • Sets up and runs operations on all types of machines and equipment.\n, • Proficient in meeting all Company quality Standards required for job function.\n, • Complies with all Company Safety Regulations and maintains a clean, non-hazardous work environment.\n, • Capable of performing job tasks in accordance with all related Company Standard Operating Procedures (SOPs).\n, • Complies with all related Company policies and procedures.\n\n Skills: \n • Minimum of 6 years directly related experience.\n, • Able to use a variety of precision measuring instruments.\n, • High School diploma or equivalent.\n\n #LI-CG1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $0 - $0 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of μ-via/HDI layout methodologies and best practices\n Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $99,150 - $174,367 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Immediate opening is available for full-time Mechanical Inspectors, 1st Class and 2nd Class for Production and Final Quality Inspection in Farmingdale. NY. Responsibilities include monitoring, measuring, and documenting the characteristics of products as compared to product requirements and prevent non-conforming product. This position will work with machined and fabricated metal products at various stages in our manufacturing processes including final Quality Inspection. We are seeking individuals with excellent interpersonal skills and operational expertise to join our production team. Essential Duties and Responsibilities include the following: • Monitor and measure the characteristics of products at appropriate stages of product realization., • Document and analyze the conformity of product to required specifications, • Cooperate with manufacturing to prevent non-conforming product and continuously improve processes. Supervisory Responsibilities: This job has no supervisory responsibilities. Balances team and individual responsibilities; Gives and welcomes feedback; Puts success of team above own interests. • Written Communication - Excellent command of the written English language; Writes clearly and informatively; Varies writing style to meet needs; comprehends and applies proper email etiquette; presents numerical data effectively; able to read and interpret complex written information (customer specification manuals, contracts, etc)., • Problem Solving -- identifies and resolves problems in a timely manner; gathers and analyzes information and data skillfully; develops alternative solutions; works well in group problem solving situations. Requirements Education and/or Experience: A high school diploma or equivalent. The preferred candidate will have: • Experience with Measuring and Testing Equipment including CMM equipment., • Ability to read and interpret part drawings, product specifications, and other related documentation. Must understand Geometric Dimensioning and Tolerances (GD&T) to product inspection Qualifications / Requirements: • Must be a detail-oriented, communicator, able to prioritize tasks and able to work under pressure with multiple deadlines., • Must be able to use all standard measuring instruments and CMM equipment., • While performing the duties of this Job, the employee is regularly required to sit; use hands to type, handle and feel. Employees must be able to communicate effectively through talking and listening. The employee is occasionally required to stand; walk, and reach, lift and carry objects weighing up to 25 lbs with hands and arms.

CNC Programming Engineer We are looking for a CNC Programming Engineer to join our Target Rock team! As our CNC Programming Engineer you will interact with and support the machine shop production and personnel. The individual receives minimum direction from the Plant or Manufacturing Engineering Manager regarding methodology of manufacturing. The individual is responsible to generate methods in detailed format for Manufacturing Production. The individual will perform all necessary tool and fixture designs for both manufacturing and quality requirements. The individual will interact with both in-house manufacturing personnel, as well as vendor interaction in the support of all tool and fixture fabrication. The individual supports CNC Programming methods within our manufacturing facility. Location: East Farmingdale, NY Salary/hourly rate: $82,200 to $120,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge \n • Generates Operation Sheets to support all phases of manufacturing within the facility. \n, • Identifies and designs necessary tooling and fixtures required to support manufacturing processes.\n, • Interacts with in-house and vendors in support of manufacturing components, as well as tool and fixture fabrication.\n, • Performs quotations for pricing inquiries, as well as manufacturing budget review for manufacturing processes.\n, • Maintain all applicable manufacturing project documentation.\n, • Additional responsibilities as assigned by Supervisor.\n, • Assists in the training of shop personnel to optimize defined manufacturing processes.\n, • Must be a US citizen\n, • Associate Degree minimum in Manufacturing/Mechanical Technology or equivalent related field or a commensurate level of related experience.\n, • 5 to 10 years experience performing manufacturing engineering responsibilities, inclusive of manufacturing methods, tool and fixture design, and budget and cost analysis. \n, • Working knowledge of Mastercam CAD/CAM software version 8.xx or greater.\n, • Ability to methodize complex parts with minimum supervision. Knowledge of machine shop practices and techniques.\n, • Design and overview tool and fixturing requirements for manufacturing components.\n, • Knowledge of raw materials and related machinability. Ability to define applicable feeds - speeds combinations for established manufacturing process.\n, • Ability to generate CAD drawings.\n, • Capable to analyze manufacturing equipment or tooling problems to efficiently implement solutions to economically solve these production problems in a timely manner.\n, • Broad knowledge of computer-controlled machine tools.\n Our Values Environmental, Social and Governance Founded in 1951 to meet the special severe service valve requirements of the United States Nuclear Navy, Target Rock is today the premier supplier of highly engineered, valves and related products to both the U.S. Navy nuclear fleet and the global nuclear power generation industry. The first Target Rock valves were installed on the U.S.S. Nautilus, the U.S. Navy's first nuclear powered submarine. To learn more, please visit us at Curtiss-Wright EMS - Target Rock (cw-ems.com) *Please note, benefits are country specific and may vary from location to location. #LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Plans and coordinates production activities and material flow to ensure that production schedules are met, determines requirements for fabrication and assembly, sets up manufacturing flow paths for release, expedites operations that delay schedules and alters schedules to meet unforeseen conditions.