Trabajos manufacturing supervisor en East Orange, New JerseyCrear alertas

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description 1st Shift Position Description: The Sanitation Operator will be responsible for keeping areas in the production and or administrative areas clean and in orderly condition as assigned by leadership. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Essential Duties & Responsibilities: • Responsible for supporting the plant's food safety culture and complying with all food safety, quality, and regulatory requirements applicable to the position., • Clean/ sanitize assigned areas by following SSOPs, • Protect, cover, or remove boxes, material, or other industrial equipment that may be affected by the sanitation process., • Collect and properly dispose of major dirt and /or product left over on production department floors or pans., • Clean / prewash heavy oil, grease, and visible dirt from machines, overhead pipes, and conveyors., • Wash walls and ceiling., • Transport trash and waste to proper disposal area., • Start pump to force cleaning solution through production machinery, piping or vats., • Clean, sanitize, disassemble, and assemble equipment according to company procedures., • Clean processing equipment, overhead pipes, and conveyors., • Scrub processing tanks, vats, and kettles., • Clean floors with mop and/or use electrical scrubber., • Operate industrial truck to transport materials within plant., • Must be trained to use cleaning chemicals according to OSHA guidelines., • Complete all required documentation for procedures performed., • Performs other cleaning duties of a similar nature as assigned by Supervisor and/or Manager.Qualifications Education: High School Diploma or equivalent Related Experience: Previous relevant experience, preferably in a manufacturing environment or commercial cleaning. Competencies: • High School diploma or General Education Degree (GED), • Experience reading and understanding MSDS (Materials Safety Data Sheets), • 6 months experience in a Sanitation role., • Ability to read and comprehend instructions, short memos., • Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • No direct reports but must be able to direct other plant personnel who are assisting in the sanitation process., • Bilingual is a plus Additional Information Physical: Must have the ability to lift 50 pounds, climb stairs, lift, bend, kneel, stand for long periods of time, work in confined spaces, and work with heights Full Time Employee Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: https://www.stratasfoods.com/compliance Stratas Foods California Privacy Rights Act Policy: https://www.stratasfoods.com/compliance

Position Title: Associate, Patient Materials Operation \n Direct Manager: Supervisor, Sample Management \n Division: CTDO Quality Control \n Duration: 06 Months \n Location: Summit West, S-12, 07901 \n \n Summary: \n Handles patient material needs/requirements for CAR-T production per Standard Operating Procedures (SOPs) in controlled and/or classified environments under the supervision of Patient Materials Operations Management. Associate must adhere to regulatory requirements while performing job functions. Job duties are performed within a team according to an assigned production shift schedule. Communication of production deviations and assistance with quality investigations are required, as applicable. \n \n Duties/Responsibilitie \n\n • Performs tasks for Cell Therapy products to support product Value Stream outputs according to Current Good Manufacturing Practices (cGMP's) following the current, approved Standard Operating Procedures (SOPs) and Work Instructions (WIs).\n, • Maintains timing according to the production schedule to ensure on-time logistics.\n, • Performs apheresis receipt of patient materials and prepares final product shipments for couriers.\n, • Executes receipt and discard of ex-US Peripheral Blood Mononuclear Cells (PBMC) and ex-US Cryopreserved Material (CMAT).\n, • Supports Sample Retrieval, Sample Movements, and Sample Storage.\n, • Supports transfers of Manufactured Goods to off-site facilities.\n, • Supports manual and electronic batch record executions, deviation investigations, and closure of CAPAs.\n, • Maintains timing according to the production schedule to ensure on-time logistics.\n, • Ensure all documentation is correct and addresses procedural/documentation errors expeditiously and effectively.\n, • Work with management to ensure adequately trained personnel are available to perform all manufacturing activities.\n, • Records patient material handling data and information in a clear, concise, format according to proper GDPs.\n, • Able to solve problems with minimal supervision.\n, • Works in a team based, cross-functional environment to complete tasks required by shift schedule.\n, • Must be able to work in an environment with blood derived components.\n, • Other duties may be assigned, as necessary.\n, • Perform other tasks as assigned.\n, • Available to work OT when business requires.\n, • Willing to work staggered day shift hours.\n\n \n Job Safety Requirements & Essential Physical Demands \n\n • Ability to safely handle chemical disinfectants, flammable materials, and hazardous chemicals\n, • Ability to independently don, doff, and wear required PPE during work shift (e.g., sterile scrubs, socks, gloves, safety glasses, safety shoes).\n, • Ability to handle liquid nitrogen (LN?) and cryogenically cooled materials during cryopreserved shipment preparation, loading, and transport while wearing required cryogenic PPE.\n, • Ability to lift, carry, push, and pull shipping containers, cryo-carts, totes, and LN? shippers, including team lifts to 50 lbs. per person from mid-thigh to shoulder height.\n, • Ability to safely operate powered scissor lifts or similar material handling equipment in accordance with site procedures.\n, • Ability to appropriately respond to alarms and emergency conditions related to cryogenic materials, shipment preparation, and material handling.\n, • Ability to use step stools to reach and handle materials\n\n \n Qualifications \n\n • Bachelor's degree\n, • OR Associate/ Medical Technical degree and 0-2 years of Manufacturing or Operations experience.\n, • OR High School diploma/GED and 2-4 years of Manufacturing or Operations experience.\n\n \n Applicant Notices & Disclaimers \n\n • For information on benefits, equal opportunity employment, and location-specific applicant notices, click here\n\n \n At SPECTRAFORCE, we are committed to maintaining a workplace that ensures fair compensation and wage transparency in adherence with all applicable state and local laws \n

Job Description Company Info Circular Services is a leading developer and operator of circular economy infrastructure and services and the largest private recycling company in the U.S. with operations across the country. We help businesses and municipalities reduce and divert waste, lowering disposal costs and fueling local supply chains by ensuring materials are recovered, recycled, and reused. About the Role: The Maintenance Mechanic Supervisor is responsible for leading maintenance systems, overseeing the continuous improvement of the process and executing long-term strategic plans. Benefits: • Health, Dental, Vision insurance, • FSA, • Vacation Time, • 401k matching, • Employee Assistance Program, • Paid Parental Leave, • Tuition Reimbursement Responsibilities: Reasonable accommodation may be made to enable individuals with disabilities to perform these essential functions. • Observes mechanical equipment in operation to locate causes of trouble, • Schedule, trains, supervise and motivate employees for maintenance tasks, • Coordinate work performed by outside vendors, • Ensure efficient repair schedules and review repair cost estimates, • Prioritize the maintenance and repairs of company equipment and parts, • Control and monitor inventory, • Dismantles equipment to remove and replace defective parts, • Adjusts functional parts of equipment and control instruments, • Ensure that all equipment complies with OEMs and regulatory agencies operating standards, • Ensures proper equipment lubrication in compliance with OEMs lubrication schedule, • Follows preventive maintenance works order procedures, • Develop familiarity with and ensure compliance with safety, health, environment and community company policies and procedures as they pertain to facility operations and equipment usage and operation, • Perform other duties as assigned Minimum Job Qualifications: • High School diploma or general education degree (GED), • Technical School Preferred, • Previous supervisory skills in a diverse, fast-paced manufacturing/production environment, • Excellent mechanical ability and strong analytical skills, • Demonstrated ability to follow procedures and work from a set of written instructions, • Basic computer skills, • Must speak and understand English; Spanish speaking is a plus, • One year minimum mechanical repair related experience in a heavy industrial setting or equivalent combination of education and experience Working Conditions and Physical Requirements: Normal work environment is outdoors, with exposure to all weather conditions, dirt, high levels of noise, smells/odors and at times exposure to dangerous and/or toxic substances requiring necessary precautions, including PPE. The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of the job. • The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl., • The employee is occasionally required to sit and talk or hear., • Must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Job Description Pay Rate: $34.53/hr + 12% shift differential Basic Function (Purpose of Position): To perform the routine repairs and installation of equipment in a timely manner to ensure minimal disruption to site operations. Essential Responsibilities and Specific Duties: • Holds at least one of the skills outlined (welding, pipe fitting, basic millwright, electrical and instrumentation)., • SAP Data entry as required for compliance and production purposes., • Trains in operation of all plant equipment as required for type of process in operation, including extraction, distillation, liquid compounding, washed extraction, and emulsions., • Interprets electrical schematics, piping and instrumentation diagrams (P&ID), and process flow diagrams (PFD)., • Maintains spare parts inventory, reporting deficiencies for restock and reorder., • Maintains a neat, orderly and clean workplace at all times., • Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) regulations and adheres to internal policies., • Performs other duties as required. Hourly Job Description – Job Specifications Minimum Education/Experience/Skills/Job Knowledge/: High School diploma or equivalent with 3-4 years previous general mechanical experience in pipefitting, welding, or pump and equipment repair is required. Must possess mechanical ability, an electrical aptitude and vocational or trade school certificates or diplomas relating to a minimum of one craft within welding, plumbing, pipefitting or electrical areas. Must be certified to operate a forklift. Computer skills are preferred. Must be willing to cross-train in other specialized crafts within Maintenance department. Dependability, effective communication skills, ability to follow instructions, good attendance and willingness to work overtime are essential. Organization Relationships: Internal Contacts: Frequent employee contact at all levels of the organization. External Contacts: Vendors and visitors. Working Conditions: May be exposed to dirty, wet or odorous conditions. May work in climatic weather changes, various height or underground levels while operating in confined spaces or in shored ditches which may be six feet or more below ground level. May be required to participate in Medical Testing Program or Hazardous Materials training. Effect of Errors: Poor repairs or failure to comply with safety practices may lead to injury of self or others. Errors in repairs may result in customer delays or dissatisfaction. Physical Demands/Dexterity: Requires frequent standing, walking and climbing a ladder (up to 30 feet). May be required to maneuver equipment up to 100 lbs and lifting up to 50 lbs regularly. Must be able to crouch, bend, and twist to work on various equipment in various settings. Ability to use heavy power tools, including vibrational tools is essential. Working outside in adverse climate conditions is required, this can include, but is not limited to hot, humid, cold, or wet situations. Equipment Used: Power tools, welders, ladders, and standard tools are utilized frequently. Computer is used on a daily basis. Responsibility for Work of Others: No direct supervisory responsibilities; however, must be a team player. Reporting observation of non-compliant or unsafe situations to supervisor or EH&S manager as required. Authority: Based on knowledge and experience makes judgment calls and takes immediate action for basic repairs and response to alarm conditions in accordance with documented procedures.

Client Overview Our client is a company that has been a local manufacturer, running a fast-paced, high-volume plant for over 50 years. They are currently looking to add a Maintenance Supervisor to their team. They are very people-focused and boast long-term tenure among many employees. This is a highly regulated environment, operating 24/7 with one other U.S.-based location. Salary/Hourly Rate $100k - $115k plus Bonus Position Overview The Maintenance Supervisor will coach and guide the Maintenance Technicians and work shoulder-to-shoulder with them on the plant floor. This is not a desk job. Expect to spend at least half your time out at the machines, diagnosing faults, demonstrating repair techniques, and showing technicians how to solve problems themselves. You will report to the Engineering Manager and be the day-to-day leader of the maintenance crew. Your success will be measured by how well the team performs: their skills, their confidence, their safety habits, and how reliably the equipment runs because of them. The best fit is someone who gets as much satisfaction from a Technician's first solo fix as from fixing the machine themselves. Responsibilities Of The Maintenance Supervisor • Run the Maintenance team day-to-day: assign work, set priorities, and keep everyone clear on what matters most each shift., • Teach on the floor and use real breakdowns as training moments, walking technicians through your reasoning rather than simply fixing the issue., • Build and run a cross-training plan so Technicians grow across electrical, mechanical, pneumatic, hydraulic, and controls work., • Provide regular, honest feedback, recognize strong performance, and address concerns directly and fairly., • Mentor newer Technicians and prepare high performers for increased responsibility., • Build a culture of accountability where employees take pride in completing work correctly and documenting it properly., • Troubleshoot and repair production equipment, including motors, drives, sensors, PLC and control systems, and pneumatic and hydraulic circuits., • Support the upkeep of coating, laminating, converting, web-handling, winding and unwinding, and drying equipment., • Respond quickly to breakdowns, establish repair plans, and work alongside the team to restore production., • Investigate root causes of recurring failures and implement long-term solutions., • Balance emergency repairs, planned maintenance, and projects against production schedules and available resources., • Develop and enhance preventive maintenance programs to reduce unplanned downtime., • Partner with Production, Engineering, and outside contractors to plan shutdowns, repairs, and upgrades., • Maintain accurate work orders, equipment histories, and maintenance records within the maintenance management system., • Lead by example regarding OSHA and company safety standards, including Lockout/Tagout, Pre-Job Briefs, and Integrated Risk Assessments., • Coach Technicians to work safely at all times, especially during high-pressure equipment breakdown situations. Required Experience/Skills For The Maintenance Supervisor • Two or more years of experience supervising or leading a team, formally or as a Lead Technician., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair skills across motors, drives, sensors, controls, pneumatics, and hydraulics., • Proven ability to teach technical skills and explain complex problems clearly to individuals with varying levels of experience., • Ability to read and interpret electrical schematics, mechanical drawings, and equipment manuals., • Experience building or managing preventive maintenance programs., • Sound judgment and a calm, practical approach to troubleshooting and problem-solving., • Strong communication and organizational skills, along with working knowledge of Microsoft Office., • Comfortable being physically active on the production floor, including standing, walking, climbing, kneeling, working from ladders and elevated platforms, and safely using hand and power tools., • Flexibility to work scheduled shifts, overtime, weekends, and occasional emergency call-ins. Preferred Experience/Skills For The Maintenance Supervisor • Experience within a continuous-process manufacturing environment., • Experience with AC/DC drives and motor control systems., • Experience installing power and control circuits., • Familiarity with combustion systems., • Knowledge of predictive maintenance and reliability-centered maintenance practices., • Hands-on experience using a CMMS., • Experience formally training, mentoring, or developing Technicians. Education Requirements • High school diploma or equivalent is required., • Technical school coursework, an apprenticeship, or certification in industrial maintenance, electrical, or mechanical disciplines is preferred. Benefits • Client-provided benefits available, upon eligibility.

Job Purpose To use your unique talents, experience, skills, education and enthusiasm to complete the Operations team and to recognize that your contribution is essential to the vision of Ring Container Technologies. Key Responsibilities and Duties Ensure the safe and efficient operation of all equipment to meet or exceed company established Overall Equipment Effectiveness (OEE) expectations and customer quality expectations. • Monitor equipment OEE for inefficiencies and recommend and/or make necessary improvements., • Develop improvements for safer and more efficient operations., • Ensure all machines guards are in place and functional., • Ensure all unsafe conditions are corrected immediately., • Ensure Lock out / Tag out policy is followed., • Troubleshoot all major problems. Responsible for continuing/implementing the Ring Family Culture in the facility. • Employees are the first priority, production is secondary., • Welcome employees to the plant every day inquiring about their personal lives and showing that Ring cares about our employees., • Manage by walking around during the shift initiating conversations with questions regarding the well-being of the employee., • Catch someone doing something well and praise. Recognize their efforts., • Understand that all employees are people and all of us have challenges. Search for the reason behind the issue, actively listen and resolve to the benefit of all. Responsible for leading and supporting employee engagement initiatives. • Conduct focused walks semi-weekly through the plant to engage with the employees., • Utilizing active listening skills, ask probing questions that encourage employee input on issues or opportunities related to safety, quality, performance, goals, scheduling, teamwork, etc.,, • Note opportunities for improvement and potential solutions based on employee input., • Develop strategies that all for employee led teams to implement or ‘try’, • Provide ongoing feedback to employee led teams and support efforts that lead to improved results, even during times of initial failure., • Celebrate wins and recognize employees participating on successful teams. Educate plant personnel on safe and proper operation of machinery, ensuring all employees receive proper and timely training. • Develop problem solving and troubleshooting skills in maintenance personnel. Maintain accurate and sufficient parts inventory while meeting the established budget. • Order and maintain min/max inventory levels of repair and/or replacement parts. Schedule and coordinate appropriate downtime to effectively perform preventative maintenance on all equipment. • Ensure equipment is clean and in ‘showroom condition’., • Pro-active in addressing machine inefficiencies during preventative maintenance. Maintain Computerized Maintenance Management Software (CMMS) system. • Maintain equipment files, vendor records, quotes, manuals, repair records, etc., • Record maintenance and repair costs; control costs through use of appropriate repair and/or purchasing methods. Coordinate with quality personnel to ensure machines are manufacturing products that exceed customer quality expectations. Schedule and coordinate all Total Productive Manufacturing (TPM) events with maintenance and production personnel. • Provide necessary training to all employees., • Establish and maintain TPM standards on all equipment., • Schedule events to ensure equipment meets TPM standards. Maintain employee documentation and schedule labor to meet budget requirements. • Maintain performance evaluations, attendance records and review time cards., • Direct the work of employees to correct improper work habits and/or behavior; reward good job performance and take corrective action as required. Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. May perform the duties of Production Supervisor as needed or required. Support the development, implementation, maintenance and ongoing improvement of food safety, food defense, and quality systems to ensure compliance with federal, state, and local government regulatory food safety requirements and Safe Quality Food Institute (SQFI) or British Retail Consortium (BRC) standards. • Ensure maintenance employees adhere to food safety, food defense, and prerequisite programs (such as security, pest control, foreign material control, allergen control, chemical control, etc.) as required., • Ensure all maintenance work is performed in a food-safe manner to prevent contamination and that housekeeping duties are performed and documented according to the Master Cleaning Schedule., • Foster a culture of safety, quality, and continuous improvement which proactively recognizes and addresses deficiencies., • Ensure that sufficient maintenance budget is created each year to maintain a high standard of quality and food safety of the facility structure and all equipment. Experience, Educational and Technical Qualifications Our Maintenance Manager must have a minimum of 5 years supervisory experience in a manufacturing environment and a 4 year technical degree and/or equivalent military experience. He/she must have the ability to provide technical guidance through past experience and industry knowledge. He/she should possess strong people skills, leadership qualities, managerial abilities, a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business. #LI-BH1 Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. CNC programming capability is highly desired. What You’ll Do: • Lead day-to-day machine shop operations while remaining actively involved on the production floor, • Set up and operate CNC Swiss screw machines to support production requirements, • Review drawings, specifications, tolerances, and job requirements before production, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements, • Troubleshoot machining, tooling, setup, quality, and production issues, • Program or modify CNC programs when needed, depending on experience, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance, • Perform and support first-article and in-process inspection using precision measuring equipment, • Ensure finished components meet print, tolerance, and quality requirements, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity, • Identify bottlenecks and adjust production priorities to keep work flowing, • Coordinate preventive maintenance and equipment repairs to minimize downtime, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency Preferred Background: • Strong hands-on experience with CNC Swiss screw machining, • Experience setting up and operating Swiss-style CNC equipment, • Ability to program CNC equipment is highly desired, • Experience with CAM-based and CNC Swiss machining environments, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment, • Experience troubleshooting machining problems and refining setups and processes, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial, • Experience scheduling and prioritizing multiple jobs across machines and production resources, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs, • Experience machining small-diameter precision components is valuable, • Plastics machining experience is preferred but not required, • Strong shop-floor leadership and the ability to work directly alongside the production team Compensation & Benefits: • $80,000–$140,000 base salary, based on experience and technical capabilities, • Medical benefits, • 401(k) with employer matching, • Paid time off and company holidays, • Discretionary bonus opportunity, • Full-time, stable employment, • Opportunity for continued professional growth This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Position Overview We are seeking a hands-on Maintenance Supervisor to lead our Maintenance Team in a high-volume coating, laminating, and converting manufacturing facility. This is a working supervisory position requiring strong electro-mechanical troubleshooting and repair skills. The Maintenance Supervisor will report directly to the Engineering Manager and supervise a team of Maintenance Technicians. Working alongside the team, the Maintenance Supervisor will provide daily direction, prioritize maintenance activities, respond to equipment breakdowns, and improve equipment reliability. The successful candidate will combine strong technical skills with the ability to lead, develop, and hold a maintenance team accountable. Key Responsibilities • Provide daily leadership and direction to Maintenance Technicians., • Prioritize maintenance activities based on production needs, equipment condition, safety, and available resources., • Work hands-on with technicians to troubleshoot and repair production equipment., • Troubleshoot electrical, mechanical, pneumatic, hydraulic, motor, drive, sensor, and control-system issues., • Support maintenance of coating, laminating, converting, web-handling, winding/unwinding, drying, and related process equipment., • Coordinate maintenance activities with Production, Engineering, and outside vendors., • Maintain accurate maintenance records and work orders using the company’s maintenance management system., • Ensure full compliance with OSHA and company safety policies, including proper Lockout/Tagout procedures, Pre-Job Briefs and Integrated Risk Assessments., • Train, coach, and develop Maintenance Technicians through hands-on instruction and cross-training. Required Qualifications • High school diploma or equivalent., • Two or more years of supervisory experience., • Five or more years of industrial maintenance experience in a manufacturing environment., • Strong electro-mechanical troubleshooting and repair experience., • Experience with industrial electrical systems, motors, drives, sensors, controls, pneumatics, and hydraulics., • Ability to read electrical schematics, mechanical drawings, and equipment manuals., • Experience implementing preventive maintenance programs., • Strong troubleshooting, problem-solving, and decision-making skills., • Ability and willingness to work hands-on with tools and equipment., • Strong communication and organizational skills., • Strong computer skills and experience using Microsoft Suite. Preferred Qualifications • Experience in coating, laminating, converting, printing, or other continuous-process manufacturing., • Experience with AC/DC drives and motor controls., • Experience in installing electrical power and control circuits., • Ability to reference and interpret National Electric Code, determine required fuse, breaker, conduit and wire size per code., • Knowledge of predictive maintenance and reliability practices., • Experience with CMMS maintenance systems., • Experience with Combustion Systems., • Technical training or certification in electrical, mechanical, or industrial maintenance. What We Are Looking For The ideal candidate is a working maintenance leader who enjoys being on the manufacturing floor and solving problems. You should be comfortable troubleshooting a machine, helping a technician make a repair, deciding what needs to be done next, and then looking for ways to prevent the problem from happening again. This position is ideal for an experienced Maintenance Lead, Lead Technician, or Maintenance Supervisor who wants to combine hands-on technical work with leadership and responsibility for improving the overall maintenance operation. Physical & Work Environment • Work in a manufacturing environment around operating machinery., • Ability to stand, walk, climb, bend, kneel, and work in various equipment locations., • Ability to safely use hand and power tools., • Ability to work from ladders and elevated platforms when required., • Ability to lift and handle maintenance-related components and materials., • Ability to work required shifts, overtime, weekends, or emergency call-ins as needed. We are looking for someone who can lead from the floor—someone who can troubleshoot the problem, help fix it, lead the team, and improve the process.

About the Role PTI Tech is seeking a hands-on Supply Chain Manager to lead purchasing, strategic sourcing, supplier management, inventory control, and warehouse/logistics operations. This role owns strategic purchasing and supplier relationships while providing overall oversight of warehouse and logistics execution through the Warehouse Supervisor. The ideal candidate brings strong manufacturing supply-chain experience and understands how purchasing decisions, supplier performance, inventory, and material availability directly impact production and customer delivery. What You'll Do Purchasing & Strategic Sourcing • Own purchasing activities for raw materials, plastics/resins, metal feedstock and powders, components, packaging, production supplies, and outside services., • Obtain competitive quotations and evaluate suppliers based on price, quality, lead time, freight, payment terms, reliability, and total cost., • Negotiate pricing, payment terms, minimum order quantities, lead times, freight terms, and supplier agreements., • Source, qualify, develop, and manage suppliers based on cost, quality, delivery, capacity, responsiveness, and overall performance., • Develop continuity plans and proactively address supplier and supply risks., • Manage secondary and outsourced-process suppliers and coordinate with Quality on certifications, nonconformances, and corrective actions., • Support quoting activities by obtaining current material, component, freight, tooling, and outside-service costs. Inventory, Materials & ERP/MRP • Use ERP/MRP demand, production schedules, usage, lead times, safety requirements, and inventory levels to determine purchasing timing and quantities., • Maintain accurate purchasing and supplier master data to support reliable MRP output., • Oversee inventory-control strategy, including ABC classifications and cycle counting., • Analyze inventory turns, days on hand, slow-moving, excess, and obsolete inventory., • Investigate inventory and material discrepancies and drive corrective actions., • Partner with Production, Planning, and Warehouse teams to ensure materials are available and staged for scheduled jobs. Warehouse, Logistics & Compliance • Directly manage the Warehouse Supervisor and maintain overall accountability for warehouse and logistics operations., • Oversee shipping, receiving, inventory accuracy, material staging, warehouse organization, 5S, and on-time customer shipments., • Oversee freight and carrier relationships, including LTL, FedEx, UPS, and other parcel carriers., • Manage customer and supplier returns/RMAs and ensure accurate ERP transactions., • Ensure domestic and international shipments comply with applicable ITAR, export-control, customs, and other regulated-shipping requirements. Leadership & Continuous Improvement • Partner with Finance, Production, Planning, Engineering/NPD, Quality, Sales, and Warehouse teams to resolve shortages, supplier issues, inventory exposure, pricing changes, and delivery risks., • Lead and develop the Warehouse Supervisor through clear priorities, expectations, coaching, and accountability., • Establish and improve standard work across purchasing, inventory, shipping, receiving, supplier management, and warehouse operations., • Track KPIs and implement improvements related to cost, supplier performance, delivery, inventory accuracy, material availability, freight, and working capital. What We're Looking For Required Qualifications • 5+ years of progressive experience in purchasing, procurement, supply chain, inventory, or materials management within a manufacturing environment., • Demonstrated experience managing suppliers and owning material availability, cost, and inventory performance., • Experience sourcing and negotiating raw materials, components, outside services, supplier agreements, payment terms, freight, lead times, and other commercial conditions., • Strong ERP/MRP experience with the ability to validate demand, inventory, lead times, supplier data, and system recommendations., • Working knowledge of inventory control, ABC classification, cycle counting, warehouse operations, material flow, and supplier performance., • Demonstrated leadership experience with strong analytical, communication, organizational, and problem-solving skills. Preferred Qualifications • Bachelor's degree in Supply Chain, Business, Engineering, Operations, or a related field; equivalent manufacturing experience may be considered., • Experience purchasing plastics/resins, metal feedstock or powders, and outsourced manufacturing services., • Experience in injection molding, MIM, CNC machining, or similar engineered manufacturing environments., • Experience in defense, aerospace, medical, or other regulated manufacturing environments., • Familiarity with ITAR/export controls, customs/export licensing, ISO 9001/AS9100, PPAP, or customer-specific supplier requirements., • Experience with supplier scorecards, RFQ/RFP processes, cost modeling, total-cost analysis, LTL freight negotiation, and parcel-carrier management., • IQMS/DELMIAWorks experience is preferred. What Success Looks Like • Strong supplier on-time delivery and quality performance., • Improved material costs and controlled purchase price variance., • Accurate inventory and completion of required cycle counts., • High on-time customer shipment performance., • Improved inventory turns and reduced excess/obsolete inventory., • Reliable material availability with minimal preventable production interruptions., • Effective freight-cost and carrier-performance management. Work Environment This is an on-site, hands-on manufacturing leadership role. The position requires regular movement between the office, warehouse, shipping/receiving, and manufacturing areas to verify material flow, inventory conditions, and supply-chain execution. The environment includes production-floor conditions, warehouse traffic, forklifts, trucks, noise, and temperature variation. Required PPE must be used in designated areas. Occasional supplier visits or business travel may be required.

Territory Sales Manager • Direct Hire, • Jersey City, New Jersey (field based/remote), • Manufacturing, Women’s Health What you should know: Mulberry is partnering with our client who is an innovative medical device manufacturer with a next-generation product line that reflects a commitment to human-centered engineering, improved clinical experience, and environmentally responsible practices. As the organization continues to grow and scale production to meet increasing market demand, they are seeking a Territory Sales Manager who is energized by mission-driven work and thrives in a fast-paced environment. In this role, you will drive adoption and growth of products across IDNs, health systems, and independent practices using a total office call approach. This role owns territory planning and execution in a quota-driven environment and builds strong KOL and customer relationships. The ideal candidate is a driven, coachable sales professional who excels in entrepreneurial environments and brings a competitive, and relational approach. A day in the life: • Build and maintain strong customer relationships, including KOL cultivation & maintenance., • Demonstrate outstanding product knowledge and can impart this knowledge to the larger sales team via cross functional collaboration., • Develop & execute on territory business plans in a 3-month sales cycle/quota-based system., • Implement targeted call plan; appropriately mobilize corporate resources where necessary., • Transfer account knowledge and other requested information to supervisor on weekly basis., • Proactively recognize and communicate urgent information in a timely manner., • Manage expense budgets for your respective geography; maintain accountability for compliance with Company policies and procedures., • Report customer product complaints & adverse events per the corporate Quality Affairs policy. Sell products per FDA labelling and regulatory requirements., • Maintain current working knowledge of reimbursement environment & speak proficiently regarding such matters., • Complete administrative requirements on time and accurately., • Proficient with the use of CRM (Salesforce); maintain and updates in a timely manner., • Maintain company standards involving ethical and moral character; consistently represent the company with the highest professional standards. Your areas of knowledge and expertise: • Bachelor’s degree in Business, Marketing, Health Sciences, or related field required, • 1+ year in medical sales required, • Polished communication: Friendly, professional, and confident verbal and written communication skills, • Must be optimistic, curious, have a continuous learning mindset, and thrive in ownership-based environments Compensation and Benefits: $85,000 annual base salary plus quarterly commission tied to quota. First-year on-target earnings (OTE): $135,000 with uncapped commission potential. Paid time off and company holidays. $650/month car allowance. Exceptional benefits: Full-time employees and their immediate household family members receive 100% employer paid health, dental, and vision insurance. Mulberry Talent Partners is dedicated to connecting exceptional talent with exciting opportunities. By applying for this position, you will also be considered for other _ within our network. If you are already part of our community, we encourage you to reach out directly to one of our recruiters regarding any specific roles that catch your eye!

We are seeking a highly organized, detail-oriented QA Documentation Supervisor (Mfg. & Pkg.) to lead our Quality Assurance documentation team and manage daily compliance operations. You will serve as the primary gatekeeper for all compliance documentation, ensuring strict adherence to cGMP guidelines, DEA regulations, and internal Standard Operating Procedures (SOPs). Major Duties & Responsibilities • Monitor, control, and maintain all Quality Assurance documentation, records, and systems., • Perform QA review and final release of commercial pharmaceutical product batches in accordance with approved procedures, cGMP requirements, and applicable FDA regulations., • Review complete Batch Manufacturing Records (BMRs), Batch Packaging Records (BPRs), and associated documentation for completeness, accuracy, and compliance., • Review and assess deviations, investigations, OOS/OOT results, and CAPAs associated with the batch prior to release., • Maintain accurate and complete batch release and disposition records in accordance with Good Documentation Practices (GDP)., • Write, review, revise, and approve Standard Operating Procedures (SOPs), validation/transfer protocols, and equipment/instrument/utility qualifications., • Review and approve master batch production records, batch manufacturing/packaging documents, and customer or shipping requirements., • Handle Change Controls, Deviations, and Investigations according to established SOPs., • Manage and resolve customer complaints effectively., • Conduct regular internal audits to guarantee full compliance with SOPs and cGMP regulations and conduct routine training sessions across the facility., • Plan, monitor, and coordinate daily schedules for incoming raw materials, in-process materials, finished products, and packaging/labeling sampling and inspection activities., • Handle and maintain Quality Assurance samples of Schedule II–V controlled substances (raw materials and finished products)., • Supervise the issuance and control of reference listed drugs and market samples., • Train, supervise, and mentor QA associates and inspectors to ensure strict adherence to SOPs and cGMP., • Execute alternative QA tasks as assigned by the department head. Qualifications • Bachelor’s degree in chemistry, Pharmacy, Biology, or a relevant scientific discipline., • 3–5+ years of QA experience in a regulated pharmaceutical, medical device, or biotech environment., • Deep understanding of cGMP (21 CFR Part 210/211) and DEA regulations for controlled substances., • Strong technical writing and editing capabilities to produce audit-ready SOPs and investigations. PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: • Ability to stand, walk, and sit for extended periods while conducting facility audits and supervising production floor activities., • Must be able to wear required personal protective equipment (PPE) and successfully perform aseptic or controlled-environment gowning procedures as required by production areas., • Ability to occasionally lift and move up to 25 lbs. of documentation boxes or product samples.

Job Description Position Summary Bennett Heat Treating & Brazing Co., Inc. is seeking an experienced and self-directed Maintenance Manager to oversee all production-equipment and facility-maintenance activities. Although the title is Maintenance Manager, this is an individual-contributor position with no direct reports. The successful candidate will personally troubleshoot, repair, inspect, and maintain electrical and mechanical systems throughout the facility. A strong Maintenance Technician or Maintenance Supervisor who is ready to assume full ownership of the maintenance function may be considered. This position works frequently with 480V electrical systems, DC voltage, water pumps, vacuum pumps, furnace elements, fans, hydraulics, and other industrial equipment. The Maintenance Manager will also maintain repair records, manage preventive maintenance activities, monitor MRO inventory, assist with quality and safety initiatives, and support corrective actions. The current maintenance workload is approximately 40% preventive maintenance and 60% emergency or corrective repair. A major objective of this position is to improve the established maintenance program and move the facility toward a more preventive and reliability-focused model. Key Responsibilities Electrical Maintenance and Troubleshooting • Diagnose, troubleshoot, and repair electrical failures affecting production and facility equipment., • Work safely with electrical systems operating at up to 480V AC, as well as DC-voltage systems., • Inspect electrical components, wiring, connections, motors, controls, switches, relays, contactors, heating elements, and related equipment., • Use appropriate testing equipment to identify electrical faults., • Replace defective electrical components according to applicable safety requirements., • Identify recurring electrical failures and recommend permanent corrective actions., • Report unsafe electrical conditions immediately., • Coordinate specialized electrical work with qualified contractors when required., • Maintain accurate documentation of electrical repairs and recurring problems. Electrical issues are currently the most common type of maintenance emergency within the facility. Mechanical Maintenance • Troubleshoot and repair mechanical systems and production equipment., • Maintain water pumps, vacuum pumps, furnace elements, fans, motors, hydraulic equipment, and related components., • Inspect equipment for wear, vibration, leaks, overheating, unusual noise, and other signs of mechanical failure., • Repair or replace defective bearings, seals, motors, belts, pumps, fans, valves, and mechanical components., • Support alignment, adjustment, lubrication, and replacement activities., • Evaluate whether equipment should be repaired, rebuilt, or replaced., • Reduce repeat failures through root-cause analysis and corrective action., • Maintain orderly tools, parts, and maintenance work areas. Vacuum Furnace Maintenance • Perform routine and corrective maintenance on vacuum furnaces and related systems., • Support the maintenance of vacuum pumps, heating elements, fans, controls, and supporting equipment., • Investigate vacuum leaks, heating issues, electrical faults, and equipment-performance concerns., • Coordinate furnace downtime and repairs with Operations and Production., • Learn facility-specific furnace systems through company-provided on-site training., • Maintain accurate records of furnace inspections, repairs, and preventive maintenance activities. Previous vacuum furnace experience is a strong advantage but is not required. The company will provide on-site training to a candidate with strong transferable electrical and mechanical skills. Preventive and Predictive Maintenance • Maintain and improve the established preventive maintenance program., • Schedule preventive maintenance according to equipment condition, manufacturer recommendations, usage, production priorities, and operational risk., • Coordinate maintenance activities with Operations and Quality., • Complete inspections, lubrication, adjustments, component replacements, and other scheduled tasks., • Track recurring failures and adjust maintenance intervals when appropriate., • Apply predictive maintenance methods when practical., • Reduce dependence on emergency repairs by identifying issues before equipment failure., • Maintain preventive maintenance records and completion logs., • Recommend improvements that increase equipment reliability and service life. The facility currently operates at approximately a 40% preventive and 60% reactive maintenance mix. The long-term goal is to move toward a predominantly preventive maintenance model. Production Equipment Repair • Respond promptly to production-equipment failures., • Determine the cause, scope, and operational impact of equipment problems., • Prioritize repairs based on safety, production requirements, quality risks, and equipment criticality., • Communicate estimated downtime and repair status to Operations and Production., • Complete emergency and corrective repairs safely and efficiently., • Test equipment after repairs to confirm safe and reliable operation., • Monitor recently repaired equipment for recurring problems., • Escalate concerns when specialized vendor or contractor support is required. Facility and Building Maintenance • Schedule and complete routine and emergency facility maintenance., • Inspect building systems and infrastructure for safety and operational concerns., • Coordinate repairs involving utilities, lighting, electrical systems, mechanical systems, plumbing, HVAC, and structural components., • Support general maintenance throughout the industrial facility., • Coordinate qualified vendors and contractors when specialized services are required., • Monitor contractor work for safety, quality, and completion., • Maintain documentation related to building repairs and facility-service activities. MRO Inventory and Maintenance Planning • Maintain an organized inventory of maintenance, repair, and operations parts., • Identify critical spare parts for production equipment., • Monitor stock levels and reorder points., • Help prevent production delays caused by unavailable replacement parts., • Plan repairs by identifying necessary labor, tools, components, materials, and contractor support., • Coordinate with purchasing and approved vendors to obtain parts., • Evaluate component cost, availability, quality, and lead times., • Maintain organized maintenance storage and work areas., • Document part usage and replacement history. Quality Management System Support • Perform maintenance activities in accordance with machine and Quality Management System requirements., • Maintain complete and accurate repair and preventive maintenance records., • Work with Quality personnel when equipment performance may affect product quality., • Support internal, customer, supplier, and external audits., • Assist with corrective action requests related to equipment, facilities, processes, or safety., • Participate in root-cause analysis., • Implement and document approved corrective actions., • Provide maintenance records and supporting documentation during reviews and audits. Safety, Health, and Environmental Support • Follow all workplace safety requirements and industrial maintenance procedures., • Identify and help resolve health, safety, and environmental concerns., • Apply lockout/tagout and hazardous-energy-control procedures., • Report unsafe equipment, working conditions, or operating practices., • Ensure equipment is properly shut down and secured before maintenance., • Coordinate repairs for conditions that create safety or environmental risks., • Help ensure contractors follow facility safety requirements., • Promote safe work practices throughout the maintenance function. Maintenance Documentation • Maintain accurate daily maintenance logs., • Document equipment failures, troubleshooting steps, completed repairs, replacement parts, downtime, and follow-up actions., • Maintain preventive maintenance schedules and completion records., • Track open maintenance requests., • Record recurring equipment problems and corrective measures., • Provide management with updates regarding equipment condition and maintenance priorities., • Maintain records required for quality, safety, and audit purposes. Process Improvement and Training • Identify opportunities to improve equipment reliability, workflow, safety, and production efficiency., • Recommend solutions for recurring equipment or facility problems., • Participate in process-improvement initiatives., • Help standardize maintenance procedures and documentation., • Train employees on equipment care, basic troubleshooting, operating considerations, and maintenance-related safety when appropriate., • Share technical knowledge with Operations, Production, and Quality personnel., • Support the development of a preventive maintenance culture. Required Qualifications Must-Have Qualifications • At least four years of industrial, manufacturing, production, or facility-maintenance experience., • Hands-on electrical troubleshooting experience., • Ability to safely work with or around 480V AC and DC electrical systems., • Strong mechanical troubleshooting and repair experience., • Experience maintaining pumps, motors, fans, hydraulic systems, or comparable industrial equipment., • Knowledge of preventive and corrective maintenance., • Ability to diagnose equipment failures independently., • Familiarity with maintenance planning and MRO inventory., • Strong understanding of industrial safety practices., • Willingness to work in an industrial environment., • Ability to maintain accurate repair, inspection, and preventive maintenance records., • Strong critical-thinking and problem-solving skills., • Self-directed work style with initiative and perseverance., • Ability to prioritize multiple maintenance requests., • Strong verbal and written communication skills., • Ability to work effectively with Operations, Production, Quality, management, contractors, and vendors., • Willingness to occasionally support urgent repairs outside regular working hours. Preferred Qualifications • Vacuum furnace maintenance experience., • Experience with vacuum pumps and furnace heating elements., • PLC troubleshooting experience., • Hydraulics and pneumatics experience., • Welding experience., • HVAC maintenance experience., • Predictive maintenance experience., • Experience supporting a Quality Management System., • Experience with corrective action requests and root-cause analysis., • Familiarity with computerized maintenance management systems., • Lockout/tagout training., • Previous maintenance leadership or facility-ownership experience., • Technical education, apprenticeship, license, or certification in industrial maintenance, electrical systems, mechanical systems, or a related field.\nCompany Description Why Work at HireFinder RPO? At HireFinder RPO, we're more than a recruiting company, we're a team of passionate professionals dedicated to connecting great talent with great opportunities. We believe that success starts with people, which is why we foster a collaborative, supportive, and performance-driven environment where recruiters are empowered to grow, excel, and make a real impact. Whether you're sourcing top talent, building client relationships, or helping candidates take the next step in their careers, your work directly contributes to the success of individuals and organizations across the country. What Makes HireFinder Different? ✅ Growth Opportunities – We invest in our team's development through ongoing training, coaching, and career advancement opportunities. ✅ Performance-Driven Culture – Hard work and results are recognized and rewarded. ✅ Supportive Team Environment – We believe in teamwork, collaboration, and helping each other succeed. ✅ Diverse Client Portfolio – Recruit for a wide variety of industries and positions across the United States. ✅ Flexibility & Work-Life Balance – We value productivity while promoting a healthy work environment. ✅ Meaningful Impact – Every placement you make changes lives, supports businesses, and strengthens communities. Our Mission At HireFinder RPO, our mission is simple: help exceptional talent find exceptional opportunities while delivering outstanding service to our clients. If you're looking for a company where your contributions matter, your growth is encouraged, and your success is celebrated, HireFinder RPO is the place for you. Why Work at HireFinder RPO?\r\n\r\nAt HireFinder RPO, we're more than a recruiting company, we're a team of passionate professionals dedicated to connecting great talent with great opportunities.\r\n\r\nWe believe that success starts with people, which is why we foster a collaborative, supportive, and performance-driven environment where recruiters are empowered to grow, excel, and make a real impact. Whether you're sourcing top talent, building client relationships, or helping candidates take the next step in their careers, your work directly contributes to the success of individuals and organizations across the country.\r\n\r\nWhat Makes HireFinder Different?\r\n\r\n✅ Growth Opportunities – We invest in our team's development through ongoing training, coaching, and career advancement opportunities.\r\n\r\n✅ Performance-Driven Culture – Hard work and results are recognized and rewarded.\r\n\r\n✅ Supportive Team Environment – We believe in teamwork, collaboration, and helping each other succeed.\r\n\r\n✅ Diverse Client Portfolio – Recruit for a wide variety of industries and positions across the United States.\r\n\r\n✅ Flexibility & Work-Life Balance – We value productivity while promoting a healthy work environment.\r\n\r\n✅ Meaningful Impact – Every placement you make changes lives, supports businesses, and strengthens communities.\r\n\r\nOur Mission\r\n\r\nAt HireFinder RPO, our mission is simple: help exceptional talent find exceptional opportunities while delivering outstanding service to our clients.\r\n\r\nIf you're looking for a company where your contributions matter, your growth is encouraged, and your success is celebrated, HireFinder RPO is the place for you.

Job DescriptionCompany Description Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description As a member of our Yard Team, you will play a crucial role in maintaining the organization and cleanliness of our yard, supporting various aspects of girder production, and ensuring a safe working environment. The ideal candidate should be detail-oriented and capable of handling various tasks related to yard operations. This role will be based in our Northeast branch located in Kenilworth, NJ and will report to our local Yard Manager. Responsibilities: • Material Handling: Assist in the loading and unloading of materials and equipment components using forklifts and other equipment., • Yard Maintenance: Maintain a clean, organized, and debris-free yard to support safety and operational efficiency. Conduct routine maintenance of the yard area, ensuring compliance with safety and housekeeping standards. Perform general labor duties, as assigned, including: 1. Sweeping, cleaning, and disposing of waste materials. 2. Assisting in the setup and preparation of work areas. 3. Supporting various yard operations as needed., • Inventory Operation and Control: Monitor and maintain accurate inventory levels of raw materials and finished products. Perform regular inventory counts and inspections to ensure consistency and accuracy. Identify and report inventory discrepancies, damages, or shortages to the supervisor in a timely manner., • Order Fulfillment: Assist in fulfilling orders by accurately counting, selecting, and preparing materials for delivery or internal use., • Assist in Production: Support production activities by transporting materials, tools, and equipment as needed. Collaborate with other team members to meet production goals., • Equipment Operation: Operate machinery, such as skid steers, in a safe and responsible manner. Conduct routine checks on equipment to ensure proper functioning., • Adhere to Safety Protocols: Follow all established safety guidelines and protocols to prevent accidents and maintain a secure working environment. Consistently wear and maintain the Personal Protective Equipment (PPE) provided, such as gloves, safety vests, and protective footwear. Remain vigilant and promptly report any safety hazards, incidents, or concerns to the appropriate personnel. Participate in safety meetings or trainings as required to stay informed on best practices and updates., • Collaboration: Work closely with other team members, including welders and fabricators, to facilitate seamless workflow and meet project deadlines. Working Conditions: • Work is performed both indoors in a warehouse setting and outdoors in the yard, in varying weather conditions., • The role may involve exposure to loud noises, dust, and heavy equipment., • Must be able to stand, walk, and perform physical tasks for extended periods. Qualifications Experience: • No prior experience required. Previous experience in a yard, warehouse, manufacturing, or construction environment is a plus, but not mandatory. Education: • High school diploma or equivalent preferred., • Willingness to Learn:, • Must be open to training and hands-on guidance. Able to follow instructions, ask questions for clarification, and demonstrate continuous improvement. Committed to maintaining a safe working environment by adhering to safety practices and PPE use. Physical Requirements: • Physical fitness and stamina to perform manual labor tasks, primarily in an outdoor environment., • Ability to lift 25 pounds consistently throughout an 8-hour shift., • Ability to stand, walk, bend, lift, and carry materials throughout the workday. Soft Skills: • Strong attention to detail and a commitment to keeping the work area clean and organized., • Effective communication skills with the ability to follow instructions and ask questions when needed., • Team-oriented with a positive attitude and strong work ethic., • Dependable, punctual, and safety-conscious. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us on-line at www.dokausa.com for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA. Compensation for this position is $22.04/hr. At Umdasch Group, we are convinced that diverse teams drive performance and are key to our global success. It’s their attitude and their contributions that matter. Regardless of any personal characteristics, people who share our values and are committed to working passionately towards our common goals will find space to grow. We believe in – and are committed to – equal opportunities for everyone.

Job Description This job post is collecting resumes for manufacturing shop clerks in our Garfield, NJ warehouse. It does not necessarily mean we currently have an opening. Once you apply your application will be saved in our database for future openings. Positions on the manufacturing shop floor include assemblers, engravers, laminators, screen press operators, packaging and floaters. SOME ESSENTIAL DUTIES AND RESPONSIBILITIES OF EACH ROLE ARE: ASSEMBLER • Review products for quality control and to ensure they meet expectations, • Disassemble, modify, and reassemble products, • Examine connections for correct fit of parts and subassemblies, • Maintain a safe and clean environment, comply with safety regulations, • Troubleshoot malfunctions, alert supervisors if repairs are needed, • Maintain inventory, expedite supply orders when inventory levels are low, • Minimize waste by conserving materials and resources ENGRAVER • Monitor equipment operation to ensure that products are not flawed., • Set equipment controls to meet cutting specifications., • Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools., • Mount materials or workpieces onto production equipment., • Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving., • Clean workpieces or finished products., • Insert cutting tools or bits into machines and secure them LAMINATOR • Receive production orders and job assignments from supervisor, • Verify the materials supplied for production are correct to produce job., • Set up press by hanging the proper roll of film, setting up feeder and delivery and setting the correct timing and tension required., • Pull proof sheets to confirm material position, adhesion and appearance and secure an approval prior to the production run., • Complete job maintaining optimum production rate while maintaining all quality standards according to customer specifications or company guidelines monitoring for defects SCREEN PRESS OPERATOR • Inspect printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjust and maintain registration, color, perforations, and other customer specific printing specifications, • Conduct a visual inspection prior to printing of all material stock and ink for defects or noncompliance with job specifications., • Carry out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Adjusts all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment. PACKAGING • Scan product bar codes into computer system and sure the correct product items are as described per order., • Ensure quality control of orders and that they are packaged properly for outgoing shipping including the correct quantity, weight, and item numbers/custom., • Sort and count products before packaging., • Operate assembly machines such as product sealing and laminating machines., • Gather and obtain finished products throughout the warehouse from assemblers, engravers, laminators, screen press operators, and digital printing teams to then package for shipping., • Load products onto rolling cards and send them to the shipping team. EXPERIENCE AND QUALIFICATIONS • High school diploma/GED, • 1-2 years of experience or specialized training in general assembly preferred, • Ability to read, write, and understand English, • Ability to stand for long periods of time, • Ability to lift up to 50 pounds, • Ability to bend, reach, and stoop, • Skilled in operating hand and power tools preferred, • Strong attention to detail, may work on assignments that are routine in nature, • Respectfully take direction from supervisors, overall positive attitude, • Follow standard practices and procedures when directed

Job Description Position Summary Fabuwood is seeking a skilled and dependable Edge Bander Machine Operator to operate our new edge bander during the night shift. This role is responsible for machine setup, operation, quality assurance, basic troubleshooting, and maintaining consistent production output. The ideal candidate will follow established Standard Operating Procedures (SOPs), perform routine machine inspections, and ensure all products meet Fabuwood's quality standards while maintaining a safe and efficient work environment. Key ResponsibilitiesMachine Operation Operate the edge bander independently throughout the night shift. Set up and monitor the machine to ensure optimal performance and production efficiency. Perform routine machine inspections, including copy wheels, glue pot, pressure settings, and other critical components. Monitor production output and make minor machine adjustments as needed. Quality Assurance Inspect finished products to ensure they meet quality standards and specifications. Immediately identify and report product defects or quality concerns. Follow established Standard Operating Procedures (SOPs) to maintain consistent product quality. Equipment Maintenance Perform basic troubleshooting to resolve minor mechanical or operational issues. Report equipment malfunctions or maintenance needs promptly to the Supervisor and Maintenance team. Maintain a clean and organized work area around the machine. Safety & Documentation Follow all company safety policies and proper material handling procedures. Complete required production reports, machine checklists, and documentation accurately. Communicate production updates, quality concerns, and operational issues to the appropriate team members. QualificationsRequired Previous experience operating manufacturing machinery or industrial equipment strongly preferred. Basic mechanical aptitude with the ability to perform minor troubleshooting. Strong attention to detail and commitment to product quality. Ability to read and follow written Standard Operating Procedures (SOPs). Reliable, self-motivated, and able to work independently during the night shift. English proficiency required; Spanish is a plus but not required. Benefits Weekly Pay Company Matching 401(k) Program Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Time Off (PTO) Paid Holidays About Fabuwood Fabuwood is the leading kitchen cabinet manufacturer in the United States. We believe that your kitchen cabinets should help create a sanctuary that offers the perfect balance of functionality and ambiance. With a wide selection of styles, materials, and finishes, Fabuwood provides beautiful, high-quality cabinetry while making luxury kitchens affordable without compromising on comfort, quality, or efficiency. Schedule: Monday – Thursday, 5:00 PM – 3:00 AM

Job DescriptionJob Title: Fabrication Machine Operator (Pharmaceutical) Location: West Caldwell, New Jersey Type: Contract Compensation: $22 - $23/Hour (based on experience) Contractor Work Model: Onsite Hours: Mon-Fri 2nd Shift: 2:15pm-10:30pm Duties and Responsibilities: • Operate vial filling machines, fabrication machines, and/or secondary packaging equipment including labels and semi-automatic packaging equipment.., • Meet established scrap rate goals., • Clean and set up manufacturing/packaging equipment., • Assure appropriate calibration stickers are current., • Record all necessary documentation in appropriate logbooks and batch records., • Communicate with IPC Operator and Supervisor on all issues concerning quality, components, and machine performance., • Palletize completed work and transport to warehouse as necessary., • Complete downtime log accurately and contemporaneously., • Assure that all reconciled labeling; e.g. pouch stock, inserts, shipper labels and waste is properly accounted for., • Communicate mechanical issues and other Production information with incoming and outgoing shifts., • Knowledgeable of all appropriate SOP’s and their practical application. Qualifications: • Must be able to successfully pass a respirator fit test to wear periodically, • Prior Pharma packaging experience required, • Ability to be gowned for manufacturing – wear safety glasses, hearing protection, full face/half mask respirator, latex gloves, Tyvek suit, • Must possess good manual dexterity and visual acuity, basic reading, writing, verbal and math skills, • Must be able to lift and move 25-49lbs throughout shift, • High School Diploma or equivalent System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. Ref: #562-Joule Staffing - Edison

Job Description Job Title: Production Operator C Classification: Hourly, Full Time, Non-Exempt Department-Location: Production - NJ Direct Supervisor: Production Supervisor Job Summary: The Production Operator “C” position is an entry-level position that primarily focuses on ensuring product quality control by utilizing various sampling and analytical testing protocols. This position also supports multiple departmental non-essential or critical functions as directed by supervision (supports B, A, and Lead Operators). This position requires some computer skills for data entry, e-mail communication, and the creation of work requests. This position may require working a rotating schedule. Supervisory Responsibilities: • None Essential Responsibilities: • Assists the Lead Operator or A Operator in monitoring process equipment and making necessary adjustments, as directed, to maintain process parameters as specified within Standard Operating Procedures (SOP’s)., • Performs sampling and analysis to maintain process and finished product specifications., • Maintains operation of filter presses by placing them on or offline for cleaning., • Loads waste materials into hoppers from filter presses., • Maintains salt storage area and adds salt to each saturator as needed. Must have the ability to safely operate a front-end loader (heavy equipment)., • Maintains the brine guard filters by replacing the filtering media as needed., • Maintains the body feed tanks by adding water and cellulose bags to each tank as required., • Operates and maintains plant utility equipment (air, water, steam, etc.) as directed., • Archives and organizes process records as instructed by supervision., • Provides housekeeping throughout the facility. Keeps the plant in order/clean condition. Maintains an inventory of necessary supplies for various departments as instructed by supervision., • May be assigned facilities maintenance duties as needed., • Performs inventory reconciliation on the laboratory reagent chemicals., • Provides support during railroad drills., • Assists with answering phones during off-hours., • Assists with the handling of non-EHS railcars., • Assists with electrolyzer cell rebuilding., • Always wears appropriate safety equipment., • Provides awareness level support to on-site incidents., • Serves as a member of The Facility Security Staff., • Provides escort service for facility visitors., • Performs other duties as assigned by supervision. Required Skills/Abilities: • Must have the capability of using Fall Suppression Equipment., • Must have a valid driver’s license and reliable transportation., • Medically qualified to participate in the Hazmat Team*., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Must be able to pass a background investigation check and maintain good standing order, as per TSA’s TWIC criteria., • Medically qualified means the employee must submit to an annual physical which may include a drug screening. Education and Experience: • High School diploma or equivalent. Experience working in a chemical manufacturing facility is a plus. Physical Requirements: • Frequently climbs stairs and ladders., • Frequently bends, stands, and lifts to 40lbs., • Must be able to work outdoors in different climate conditions., • Must be able to sit for extended periods., • Must be able to walk on secure elevated process platforms more than 15-foot heights. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills, or working conditions associated with this position. While this position description is intended to reflect the position's activities and requirements accurately, management reserves the right to modify, and or remove duties as necessary. This is a Safety Sensitive Position within the organization. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionEdge Band Operator – 2nd ShiftPay: Starting at $25.00/hour Location: Carlstadt, NJ Schedule: Monday–Friday, 3:15 PM–11:30 PM Employment Type: Full-Time Department: Production Reports To: Production SupervisorJob SummaryWe are looking for an experienced Edge Band Operator to join our Production team in Carlstadt, NJ.The Edge Band Operator will be responsible for setting up and operating the edge banding machine to apply edge banding to wood doors while ensuring finished parts meet company quality and dimensional standards.The ideal candidate will have 3+ years of experience operating an edge banding machine and a strong background in door or cabinet manufacturing.Key Responsibilities • Set up and operate the edge banding machine for door production., • Load materials and select the correct edge band tape/material for each job., • Adjust machine settings, including speed, glue temperature, and trimming, for different materials and thicknesses., • Inspect finished edges for glue lines, chipping, gaps, proper adhesion, and accurate trimming., • Perform routine machine cleaning, minor maintenance, and troubleshooting., • Stage and safely move completed parts to the next production station., • Read and follow basic cut lists, production tickets, and work orders., • Report material shortages, machine issues, and quality concerns to the Production Supervisor., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality standards.Requirements, • Minimum 3 years of experience operating an edge banding machine., • Door or cabinet manufacturing experience required., • Ability to read and understand basic cut lists, tickets, and work orders., • Strong attention to detail and commitment to quality., • Ability to work efficiently in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work effectively as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move materials up to 50 lbs., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure, • Must be able to walk and climb up/down stairs and ladders (portable, fixed). Ability to lift up to 50 pounds and perform physical tasks requiring standing, bending, and walking for extended periods., • Must have the appropriate level of sensory acuity (visual, hearing, speaking, smell and touch) to be able to identify and react to normal, abnormal and alarm conditions (chemicals, temperature, etc.) Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $18.06 Full Time Employee Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: https://www.stratasfoods.com/compliance Stratas Foods California Privacy Rights Act Policy: https://www.stratasfoods.com/compliance

Job DescriptionJob Title: Blender Department: Packing Department Reports To: Production Manager Location: Strike Force Staffing – Clifton, NY Employment Type: Full-Time Availability: Open Availability (including weekends and holidays as needed) Number of Openings: 1 Salary: $27.49 Work Environment: Exposure to extreme temperatures (hot/cold); food handling requiredSUMMARY The Blender operates, maintains and troubleshoots all blending machines, such as airlocks, blowers, motors, lab equipment; measures bins, inspects bins, cleans floors, fills feeders, takes samples. The product must meet our client specifications. Any other duties as delegated by supervisor ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Is responsible for a variety of support and service functions including: • Learn, operate, maintain and trouble shoot all blending machines, such as airlocks, blowers, motors, lab equipment, computers, etc., • Blend flour from flour bins and operate a select-a-type panel board and/or computer interface, which controls the pneumatic transfer of product from bulk bins to packer, bulk trucks, bulk rail cars, etc., • Direct the packers and advise what flour blend is in specific bins to be packed and which bags are to be used., • Make adjustments and repairs to blending systems as necessary., • Work with and interacts with truck drivers, packers and supervisors, sales staff and truck dispatchers, to assure that production and shipping schedules are met., • Take bin inventory, inspect bins, cleans floors, fills feeders, takes samples, and any other duties as delegated by supervisor., • Calculate figures to prepare reports and complete all required daily paperwork to track movement and disposition of flour., • Work weekends as required., • Print Loading Orders, input truck shipments and verify correct “Bill of Lading”, “COA” and “Vehicle Inspection Form” and complete any other paperwork for each load as needed, • This is not an all-inclusive list; the blender is expected to perform other duties. DIMENSIONS The Blender position operates on the 1st, 2nd, or 3rd shift, but may be required to work other hours as business dictates. QUALIFICATIONS to perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE High school diploma or equivalency is required. No previous experience is required. LANGUAGE SKILLS Must be able to read, write and comprehend English and complete reports. Must have the ability to read, analyze, and interpret memo, technical procedures, or governmental regulations. MATHEMATICAL SKILLS Ability to work with mathematical concepts and apply concepts such as addition, subtraction, multiplication, division, fractions, percentages, ratios, and proportions to practical situations REASONING ABILITY Must have the ability to learn system functions, operations and process flow and be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. CERTIFICATES, LICENSES, REGISTRATIONS On-going training to enhance performance in position as required. FOOD SAFETY / SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained on and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of their work environment and prevents any accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put product on hold if they have a concern. At the plant level, only the Quality Assurance and Plant Manager have the authority to release product on hold.

Job Description WALK-IN INTERVIEWS – Material Handler Carlo’s Bakery – 631 Grove St., Jersey City, NJ 07310 Come apply in person and meet our team! Pay: $16.00/hour Shifts: Monday - Saturday (6:00am - 3:00pm) , (3:00pm - 1:00am) No experience required. Stop by to interview for your opportunity to join the Carlo’s Bakery family! Must be 18+ years or older Responsibilities: • Strictly adhere to Good Manufacturing Practices (GMP) & safety protocols., • Assist with general production under a supervisor, • Feed cakes into automated machinery, • Place finished cakes into automated packaging machines, • Organize and set up station, • Follow sanitation protocol to clean as you go and clean equipment after use, • Assist with packing baked goods to be delivered to store locations, • Ability to lift up to 50 lbs, • Other duties assigned by the Production Manager ENTREVISTAS SIN CITA – Encargado de Materiales Carlo’s Bakery – 631 Grove St., Jersey City, NJ 07310 Ven a aplicar en persona y conoce a nuestro equipo. Pago: $16.00 por hora Turnos: Lunes - Sabado (6:00am - 3:00pm) , (3:00 pm - 1:00am) Experiencia: No se necesita ¡Pasa a una entrevista para tener la oportunidad de unirte a la familia de Carlo’s Bakery! Deben ser mayores de 18+ para aplicar Responsabilidades: • Cumplir estrictamente con las Buenas Prácticas de Manufactura (BPM) y los protocolos de seguridad., • Colaborar en las tareas generales de producción bajo la supervisión de un encargado., • Alimentar la maquinaria automatizada con los pasteles., • Colocar los pasteles terminados en las máquinas de envasado automático., • Organizar y preparar el puesto de trabajo., • Seguir los protocolos de higiene, realizando la limpieza durante el proceso y limpiando los equipos después de su uso., • Ayudar en el empaquetado de productos horneados para su distribución a las tiendas., • Capacidad para levantar hasta 50 libras (aprox. 23 kg)., • Otras tareas asignadas por el Gerente de Producción.

Job Description Title: Senior R&D Chemist Department: Research & Development Reports To: R&D Lab Supervisor Location: Newark, NJ area Position Summary The Senior R&D Chemist is responsible for the research, formulation, development, testing, and commercialization of innovative adhesive, coating, sealant, encapsulating, and polymer systems. This role supports customer-driven development projects while improving existing products, providing technical expertise to Manufacturing and Sales, and ensuring compliance with company quality systems. The position requires strong technical knowledge, problem-solving skills, and the ability to manage multiple projects from concept through commercialization. Qualifications • Bachelor's degree in Chemistry, Polymer Science, Chemical Engineering, Organic Chemistry., • Master's or Ph.D. in Polymer Chemistry, Organic Chemistry a plus. Knowledge, Skills & Abilities • Strong understanding of polymer chemistry and formulation principles., • Experience with laboratory testing methods and analytical equipment., • Ability to independently design experiments, analyze data, and solve technical problems., • Excellent written and verbal communication skills., • Strong organizational and project management skills., • Ability to manage multiple projects while meeting deadlines., • Proficiency with Microsoft Office and laboratory documentation systems., • Knowledge of AS9100 and ISO 9001 quality systems preferred. Essential Duties and Responsibilities • Develop new adhesive, coating, sealant, potting, and encapsulating formulations to meet customer and market requirements., • Improve existing products by optimizing performance, manufacturability, cost, and regulatory compliance., • Design experiments, evaluate results, and recommend formulation improvements., • Research emerging raw materials and technologies to support product innovation. Product Commercialization • Lead laboratory development through pilot-scale trials and full manufacturing implementation., • Support production scale-up activities and validate manufacturing processes., • Prepare technical documentation, product specifications, and development reports. Technical Support • Evaluate and qualify new raw materials and alternative suppliers., • Support Manufacturing by troubleshooting production issues, resolving formulation-related deviations, and improving process efficiency., • Provide technical support to Sales and Customer Service regarding product selection, customer trials, and technical inquiries., • Lead or participate in customer meetings and assist with technical presentations when required. Quality & Compliance • Maintain accurate laboratory notebooks, test records, and project documentation., • Ensure compliance with AS9100, ISO 9001, safety, environmental, and regulatory requirements., • Maintain laboratory equipment and ensure calibration and preventive maintenance requirements are met., • Follow all company safety policies and laboratory procedures. Teamwork & Leadership • Collaborate effectively with Manufacturing, Sales, Quality, Purchasing, and Operations., • Mentor junior laboratory personnel as assigned., • Contribute ideas for continuous improvement within the laboratory and throughout the organization., • Demonstrate professionalism, accountability, and a customer-focused approach in all interactions.

Job DescriptionAssembly Operator – Glass Kits | 2nd Shift$25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-HireLocation: Carlstadt, NJ Job Type: Full-Time, Temp-to-Hire Shift: 2nd Shift Pay: Starting at $25.00/hour About the Opportunity We are currently hiring an experienced Assembly Operator – Glass Kits for our client, a manufacturing company located in Carlstadt, NJ. The Assembly Operator will be responsible for assembling glass kits into wood doors while ensuring proper fit, sizing, alignment, and finish. The ideal candidate will have hands-on experience working with moldings, measuring and cutting materials, installing molding, and applying caulk to a professional finished standard. Responsibilities • Assemble glass kits into doors according to job specifications., • Measure and accurately cut moldings to required dimensions., • Confirm door openings and verify the correct glass size before installation., • Install molding around glass units according to specifications., • Apply caulk neatly and consistently for a clean finished appearance., • Inspect completed doors for gaps, defects, misalignment, and overall quality., • Read and follow job tickets and work orders to confirm specifications., • Report material shortages, dimensional discrepancies, or other issues to the Production Supervisor., • Maintain a clean, organized, and safe assembly workstation., • Handle glass components carefully and follow all applicable safety procedures.Requirements, • Minimum 3 years of experience assembling with moldings required., • Experience measuring and cutting moldings accurately., • Experience verifying door openings and glass sizing for proper fit., • Experience installing molding and applying caulk to a finished standard., • Ability to read and understand job tickets and work orders., • Strong attention to detail and craftsmanship., • Ability to work accurately and efficiently in a production environment., • Reliable attendance and punctuality., • Ability to work independently and as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move doors and glass units up to 75 lbs., with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to carefully handle glass components., • Ability to safely perform the physical requirements of a manufacturing environment.

Job DescriptionDescription: Bestmark National is the premier design-build firm specializing in commercial, retail, and hospitality environments. Driven by uniquely passionate leadership, Bestmark National has consistently delivered high-quality results tailored to each client’s specific needs. Our state-of-the-art facility, combined with a highly experienced and versatile team, ensures the safe, well-executed, and timely delivery of projects across America. Role Description: This is a full-time on-site role for a Purchaser, located in Irvington, NJ. The Purchaser will be responsible for sourcing and purchasing materials, products, supplies, and services required to support Bestmark National’s millwork manufacturing and construction projects. The Purchaser will work closely with Project Management, Estimating, Production, Accounting, and vendors to obtain competitive pricing, coordinate material availability, and ensure purchases are delivered in accordance with project requirements and schedules. Essential Duties and Responsibilities: • Review project requirements, drawings, specifications, material lists, and purchase requests to determine purchasing and procurement needs., • Source materials, hardware, components, supplies, specialty products, and services required for millwork manufacturing and construction projects., • Obtain and compare vendor quotations based on pricing, quality, availability, lead time, and project requirements., • Negotiate pricing, terms, and delivery requirements with vendors and suppliers when appropriate., • Prepare and process accurate purchase orders in accordance with company procedures and project requirements., • Communicate with vendors and suppliers to confirm pricing, specifications, quantities, purchase orders, and delivery dates., • Track purchase orders and follow up with vendors to ensure materials and products are delivered according to project schedules., • Maintain strong working relationships with vendors, manufacturers, distributors, and subcontractors, while supporting the development and maintenance of an effective supplier network., • Coordinate with Project Management, Estimating, and Production to identify upcoming material requirements, procurement priorities, and potential delays., • Identify alternate products, materials, or suppliers when necessary to meet project requirements, availability, budget, or schedule needs., • Review vendor confirmations, invoices, and related purchasing documentation for accuracy and communicate discrepancies to the appropriate department., • Monitor material availability, pricing, and lead times and communicate potential impacts to project costs or schedules., • Support cost-control efforts by obtaining competitive pricing, evaluating purchasing options, and identifying opportunities for cost savings., • Maintain accurate purchasing records, vendor information, purchase orders, and project documentation, and coordinate with Accounting regarding invoices and vendor-related discrepancies., • Follow Bestmark National's quality, safety, and company procedures and perform other duties and responsibilities as directed by the Supervisor and Production Manager.Requirements:, • Previous experience in purchasing, procurement, buying, or a related position., • Experience in millwork, construction, manufacturing, architectural woodworking, or a related industry is preferred., • Strong organizational and time-management skills., • Excellent attention to detail and accuracy., • Excellent oral and written communication skills., • Ability to review and understand specifications, drawings, material requirements, and purchase documentation., • Strong negotiation, vendor-management, and problem-solving skills., • Strong computer skills, including Microsoft Office., • Able to work independently and effectively with a team., • Highly motivated with the ability to work with minimum supervision., • Must be able to manage multiple projects, vendors, and deadlines in a fast-paced environment., • Must be able to work overtime when needed.

Job DescriptionJob Title: Press Setup OperatorJob Description The Press Setup Operator sets up compound and progressive tooling and maintains a strong working knowledge of all machinery in the pressroom. This role interprets customer drawings, selects appropriate materials for each job, organizes and maintains tooling and setup equipment, and ensures accurate and safe operation of presses under the guidance of the Production Supervisor or Production Manager. Responsibilities • Receive job assignments and select the appropriate material, tooling, and documentation for each job., • Set up all types of dies, including stamping dies, draw dies, and progressive dies, to meet production requirements., • Perform setup of presses and tooling for stamped metal components, ensuring proper alignment and operation., • Set up related processes and equipment, including shields, feeds, air cushions, stock reels, scrap cutters, lubricants, and other associated devices., • Interpret customer drawings and specifications to ensure parts meet required standards and dimensions., • Use a variety of measurement instruments to verify part dimensions and quality during setup and first-piece inspection., • Perform first-piece inspections and assist with quality control as needed to ensure products meet specifications., • Input all required router and production data into the computer system to maintain accurate production records., • Complete all required documentation accurately and on time, ensuring traceability and compliance., • Instruct press operators on the proper use of safety devices, setup parameters, and standard operating procedures., • Direct press operators on what jobs to run and provide guidance during changeovers and setups., • Operate with minimal guidance, troubleshooting setup issues and making necessary adjustments to improve performance., • Ensure the accuracy and completeness of all related records, including setup sheets and production logs., • Maintain a clean, organized, and obstruction-free work area to support safe and efficient operations., • Adhere to ISO 9001:2015 and AS9100 standards in daily work practices and documentation., • Identify and implement improvements and innovations beyond the immediate scope of assigned responsibilities., • Maintain important job-related data using computer systems and basic computer knowledge., • Observe all safety regulations and consistently use appropriate safety equipment and protective devices., • Assist employees with work-related inquiries and support a collaborative pressroom environment., • Perform other related responsibilities as necessary to support production and team goals.Essential Skills, • Hands-on experience setting up stamping dies, draw dies, and progressive dies in a pressroom environment., • Mechanical aptitude and ability to work with sheet metal and stamping operations., • Proficiency in setting up presses and associated equipment such as feeds, shields, air cushions, stock reels, scrap cutters, and lubrication systems., • Ability to interpret and understand customer drawings and technical documentation., • Experience using measurement instruments and measuring tools to verify part dimensions and quality., • Ability to use hand tools safely and effectively for setup and adjustment tasks., • Basic computer skills to input router and production data and maintain accurate records., • Ability to work with minimal guidance, troubleshoot setup issues, and make sound decisions., • Capability to sit, stand, bend, and lift up to 60 lbs as required by the role., • Strong awareness of safety regulations and proper use of safety equipment.Additional Skills & Qualifications, • Familiarity with sheet metal manufacturing and stamped metal component production., • Experience working in a pressroom environment with progressive die operations., • Understanding of ISO 9001:2015 and AS9100 standards and their application in daily work., • Ability to instruct and guide operators on safe operation and proper use of safety devices., • Strong organizational skills to maintain tooling, setup equipment, and work areas in an orderly condition., • Willingness to contribute ideas and innovations beyond assigned responsibilities.Why Work Here? This is an opportunity to join a family-owned organization that is committed to growth and long-term stability. You will work in an environment where your skills and initiative are valued, and where there is clear opportunity for professional development and advancement as the company continues to expand. The culture emphasizes teamwork, respect, and continuous improvement, offering you a place to build a lasting career while contributing to a growing operation. Work Environment The role is based in a metal manufacturing environment that is climate controlled to support comfort and consistency in production. You will work around presses, dies, and related equipment in a structured, safety-focused setting. The position requires regular sitting, standing, bending, and lifting up to 60 lbs, as well as frequent use of hand tools and measuring instruments. The facility emphasizes cleanliness and organization, with a strong focus on maintaining a safe, efficient, and orderly pressroom. Job Type & Location This is a Contract to Hire position based out of Springfield, NJ. Pay and Benefits The pay range for this position is $25.00 - $32.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Springfield,NJ. Application Deadline This position is anticipated to close on Oct 16, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionDescription: PrecisionX Group is a leading provider of precision metal components, serving critical industries such as aerospace & defense, medical devices, satellite & space, electric vehicles, mining, and semiconductors. By uniting the specialized expertise of GEM, Coining, National Manufacturing, Ditron, MSK Precision Products, and Hudson Technologies, we offer a comprehensive range of advanced manufacturing solutions. Our core capabilities include machining, deep drawing and progressive stamping, Swiss machining, micro stamping, and transfer press. Our team consists of over 600 employees, located in CT, NJ, NY, and FL. With our collective expertise, our strong foundation in metal manufacturing techniques, and a relentless focus on quality and innovation, PrecisionX Group is committed to delivering superior products and services that meet the evolving needs of our customers. We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program We are proud to offer a competitive benefits package, including Health, Dental, and Vision insurance coverage, 401K, Life Insurance, Short Term Disability, Performance Pay Bonus, Paid Time Off, and EAP Program Position Summary: • The Quality Inspector-Packer is responsible for inspecting, packaging, and preparing products for shipment in accordance with customer specifications, quality standards, and company procedures. This position performs mechanical and visual inspections, maintains accurate inspection and production records, and ensures that products are properly identified, documented, packed, and shipped.Requirements: Essential Functions: To accomplish this job successfully, an individual must be able to satisfactorily perform each stated essential function, with or without reasonable accommodation. Reasonable accommodations may be made to help qualified individuals with disabilities perform the essential functions. Key Responsibilities: Inspection and Packing: • Inspect and pack parts according to due date priority and follow approved specific packing instructions and supervisor guidance., • Interpret sales write-ups and special packaging instructions and accurately maintain charts and inspection recordkeeping., • Operate electronic counting scales and use the shop floor production control system to maintain accurate records for inspected and packed work, including pulling certifications and certificates of conformance., • Use ERP software to process work orders, maintain accurate inventory and transaction records, generate required documentation, and support production and shipping activities., • Use UPS, FedEx, and DHL shipping software to create shipping labels, prepare domestic and international shipment documentation, track shipments, and ensure accurate and timely customer deliveries. Quality Inspection: • Performs company quality control, technical and customer satisfaction activities., • Implements and follows inspection programs and instructions related to manufacturing objectives., • Operates all gages, software, vision systems and related SPC methodologies., • Documents and enforces Standard Operating Procedures (SOPs) within the ISO system. Non-essential Responsibilities: • Performs other duties as directed., • Supports broader inspection, packing, and shipping-related business objectives as needed. Position Qualifications and Competency Statements: • Regard for safety – Ability to follow safety rules and processes and keeps own safety and the safety of others in the forefront of every action., • Integrity – Ability to demonstrate consistency between words and actions. Follows through on commitments., • Attitude – Ability to maintain a positive mindset towards achieving success and eagerness and willingness to accept and meet challenges., • Application of technical knowledge and skills – Ability to comprehend complex technical and specialized information., • Accountability – Ability to accept responsibility and account for his/her actions., • Time and Priority Management – Ability to utilize the available time to organize, prioritize and complete work within given deadlines., • Communication – Ability to effectively communicate with others verbally and in writing. Skills and Abilities: • High school diploma or equivalent GED-level education, • In-house training is preferred. Manufacturing experience preferred., • Ability to read and interpret material cards and process sheets, follow written and verbal instructions, and use computers effectively., • Good manual dexterity, eye-hand coordination, and attention to detail in inspection and packaging work., • Experience with precision measuring equipment such as calipers, micrometers, pin gages, optical comparators, and visual measuring systems. Work Environment: This position involves working in a manufacturing environment that is adjacent to the shop work environment. The employee must be aware of potential hazards, including, but not limited to, working in close proximity to moving mechanical parts, operating vehicles, exposure to electrical current, high temperatures, and chemicals. It's important to maintain a high level of alertness and caution while performing tasks in this work environment.

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Company: Fabuwood Cabinetry Corp. Location: Newark, NJ Schedule: Monday–Thursday, 5:00 PM–3:00 AM Position Overview Fabuwood Cabinetry Corp., a leading cabinet manufacturing company, is seeking a hands-on and dependable Night Shift Warehouse Supervisor to oversee manufacturing operations during the overnight shift. This position is responsible for leading production employees, maintaining workflow, meeting production goals, and ensuring all work is completed safely and according to Fabuwood’s quality standards. The ideal candidate is a visible floor leader who communicates effectively, responds quickly to production challenges, and takes ownership of the shift’s overall performance. Key ResponsibilitiesProduction Leadership • Lead and supervise production employees throughout the night shift., • Conduct pre-shift meetings to review safety expectations, production priorities, staffing assignments, and potential concerns., • Assign employees to workstations based on production needs, experience, and workload., • Monitor workflow and production progress to ensure daily goals are achieved., • Maintain an active presence on the production floor and understand what each team and workstation is working on., • Address production delays, material shortages, staffing concerns, and equipment issues promptly., • Ensure a clear and accurate handoff to the incoming shift.Team Management, • Motivate employees and maintain accountability for performance, attendance, safety, and workplace conduct., • Train and coach employees on proper procedures, quality expectations, and safe work practices., • Provide ongoing feedback and assist employees in improving their performance., • Work closely with team leads and other supervisors to maintain consistent operations., • Escalate employee relations or disciplinary concerns to management and Human Resources when necessary.Safety and Quality, • Enforce all company safety policies and immediately address unsafe conditions or behaviors., • Ensure employees use the required personal protective equipment., • Monitor product quality and confirm that finished products meet company specifications., • Investigate quality concerns and work with the appropriate departments to prevent recurring issues., • Maintain clean, safe, and organized work areas.Equipment and Operational Support, • Monitor equipment performance and report breakdowns or maintenance needs promptly., • Coordinate with Maintenance to minimize downtime and restore production., • Confirm that employees are following approved operating procedures., • Track production results, downtime, labor needs, and any issues affecting the shift., • Complete required reports and communicate important updates to management.Qualifications, • Previous supervisory or team-lead experience in manufacturing, production, warehousing, woodworking, cabinetry, or a related environment., • Strong leadership, communication, and problem-solving skills., • Ability to manage employees and maintain productivity in a fast-paced environment., • Comfortable addressing performance, attendance, quality, and safety concerns., • Ability to prioritize responsibilities and make sound decisions with limited supervision., • Basic computer skills and experience completing production reports., • Cabinet manufacturing or woodworking experience is preferred but not required., • Bilingual English and Spanish is preferred., • Must be available to work Monday–Thursday from 5:00 PM–3:00 AM and additional hours when business needs require.Physical Requirements, • Ability to stand and walk throughout the majority of the shift., • Ability to work in an active manufacturing environment., • Ability to bend, reach, push, pull, and lift materials as required., • Ability to wear the required personal protective equipment.Benefits, • Weekly pay, • Health insurance, • Dental and vision insurance, • Life insurance, • Paid time off, • Paid holidays, • Company-matching 401(k), • Opportunities for professional growth and advancement

Job Description IMMEDIATE SHIPPING CLERK AVAILABLE! ($26/HR) Large company with opportunity for growth looking for SHIPPING CLERKS to join their team. Pay: $26/HR Location: Fairfield, NJ Shift: 6:30am-3pm Monday-Friday *Must be open to working overtime on weekends when needed Job Description: • Organize and oversee the day-to-day operation of the warehouse shipping and receiving area., • Maintain detailed shipping and receiving logs and keep organized files of all shipping records., • Prepare packing lists, bills of lading, and other shipping documentation accurately and in a timely manner., • Notify the supervisor promptly of any discrepancies in incoming shipments and tag parts as needed., • Close aftermarket and stock jobs and issue parts accordingly in coordination with inventory and production requirements., • Ship customer orders by verifying that actual items and lot numbers match the order requirements before shipment., • Track and record all inventory movements in the Syteline ERP system to maintain accurate stock levels., • Perform and/or manage daily inventory cycle counts and assist with full physical inventory counts for raw materials, plastic parts, and equipment parts., • Use ERP to enter, update, and review data related to inventory, shipments, and receipts., • Assist in the stockroom as needed, including picking, packing, and staging orders., • Operate material handling equipment such as forklifts and pallet jacks to move, load, and unload materials., • Use shipping systems such as UPS WorldShip and FedEx software to process shipments and labels., • Handle packaging tasks to ensure products are securely and correctly packed for shipment., • Perform data entry related to orders, inventory transactions, and shipping documentation with a high degree of accuracy., • Support inventory control by conducting manual cycle counts and investigating discrepancies. *Position is a fulltime and permanent role *Company has great benefits and 401k plan *You can start work immediately as there is no interview PLEASE APPLY IMMEDIATELY TO BE CONSIDERED FOR THIS ROLE! Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $26.50 - $26.50/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Oct 16, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Pay: $60,000.00 - $70,000.00 per year Job description: We are seeking an experienced and motivated Second Shift Production Supervisor to help oversee daily plant operations . The ideal candidate is a strong leader with experience in high-speed manufacturing environments and the ability to drive safety, quality, productivity, and continuous improvement initiatives. This role is responsible for supervising production activities, ensuring compliance with company policies and regulatory requirements, supporting employee development, and maintaining efficient plant operations in a fast-paced manufacturing environment with over 150 employees. Bilingual English/Spanish communication skills are strongly preferred. Key Responsibilities • Plan, organize, and supervise daily second shift production operations to meet production and customer goals, • Monitor production performance, quality standards, and on-time shipment requirements, • Promote and enforce workplace safety policies and procedures, • Optimize labor, equipment, and material resources to maximize productivity and minimize waste, • Identify operational inefficiencies and implement corrective actions and continuous improvement initiatives, • Analyze production data, downtime, scrap, and overtime trends to improve operational performance, • Ensure compliance with FDA, USDA, GMP, sanitation, and company standards, • Partner with maintenance, quality, warehouse, and management teams to support efficient plant operations, • Train, coach, and develop production employees while maintaining accountability and performance standards, • Address employee relations and performance matters in accordance with company policy, • Maintain accurate production and operational records, • Stay informed on manufacturing best practices, safety standards, and operational improvements, • Foster a respectful and inclusive multicultural work environment, • Overtime will be often required Qualifications • 3+ years of supervisory or management experience in a manufacturing environment Strongly preferred, • Experience in food, pharmaceutical, cosmetic, or other high-speed manufacturing environments strongly preferred, • Experience with high-speed packaging and/or filling equipment strongly preferred, • Knowledge of plant operations including HVAC, refrigeration, sanitation, and GMP compliance, • Strong leadership, communication, problem-solving, and organizational skills, • Ability to work effectively in a fast-paced environment, • Bilingual English/Spanish skills required to be successful, • Must be available to work overtime as needed Physical Requirements • Ability to stand, walk, bend, and lift up to 50 pounds as needed, • Ability to work in a manufacturing and warehouse environment with varying temperatures Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Experience: • Production Supervisor : 3 years (Required), • Food manufacturer : 3 years (Required) Language: • English and Spanish (Required) Shift availability: • Night Shift (Required) Ability to Commute: • Union, NJ 07083 (Required) Work Location: In person \nCompany Description Deep Foods is a major food manufacturer based that specializes in prepared Indian foods and frozen food products. Since 1977, we have been dedicated to delivering high-quality products through innovation and a commitment to excellence. Our mission is to bring authentic Indian cuisine to consumers nationwide while maintaining the highest standards of quality and safety. Deep Foods is a major food manufacturer based that specializes in prepared Indian foods and frozen food products. Since 1977, we have been dedicated to delivering high-quality products through innovation and a commitment to excellence. Our mission is to bring authentic Indian cuisine to consumers nationwide while maintaining the highest standards of quality and safety.

Job Description CNC Machinist Shift: 1st Shift: 7:00 AM – 4:00 PM (Potential OT) Salary: $25.00 – $33.00 per hour Who we are A well-established specialty component manufacturing facility located in Newark, NJ, serving critical defense and heavy industry partners. The organization is dedicated to high-quality production, workplace safety, and continuous improvement across all operations. CNC Machinist Role The CNC Machinist sets up, operates, and monitors vertical milling machinery to manufacture high-precision components to exact customer specifications. CNC Machinist Responsibilities • Set up and operate CNC vertical milling machines to produce precision components, • Perform equipment pre-operation checks to ensure proper setup, startup, and continuous running, • Monitor multi-equipment operations during production runs to minimize downtime and maintain quality standards, • Select appropriate speeds, feeds, and tooling based on material and part specifications, • Inspect finished parts using precision tools to ensure exact alignment with blueprint specifications, • Perform basic troubleshooting and adjust machine parameters as needed during operation, • Maintain clear communication with team members and support teams to maximize production efficiency, • Rotate across different departmental work centers as required CNC Machinist Reporting Relationships Reports directly to the Machine Shop Supervisor with no direct reports About You • Possess at least five years of manufacturing or precision machining experience, • Demonstrate proficiency setting up and operating CNC vertical mills, • Read and interpret engineering blueprints, schematics, and technical manuals, • Program and edit machine functions using G&M code, • Utilize precision measuring instruments including micrometers, calipers, and gauges, • Operate material handling equipment safely within a production facility, • Demonstrate English communication skills to read, write, and count inventory accurately, • Lift up to 40 lbs and work effectively in an active shop environment Next Steps If detail-oriented and quality-focused describes you, we would like to hear from you. Additional Information • Physical Demands & Working Conditions: Position requires standing for long periods, bending, reaching, and lifting up to 40 lbs. Operates in a manufacturing environment near active machinery., • Equal Opportunity Employer: All qualified applicants receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. #INDRBR2

Job Description Ready to take the next step in your career? We have several openings for experienced Warehouse Supervisors on 1st and 2nd Shifts. Locations: • Kearny, NJ, • Lyndhurst, NJ Warehouse Supervisor - Lyndhurst, NJ Salary: $28-$35 depending on experience Hours: 1st Shift 5am-5pm / 2nd Shift 5pm-5am (during peak) Job Responsibilities: • Set production goals and expectation, • Ensure proper housekeeping of the plant, • Analyze scorecards and production reports, • Oversee yard/warehouse personnel, • Hire, train, promote and discipline employees, • Adjust employee schedules to ensure adequate coverage of shifts, • Plan and manage raw material and finished goods inventory, • Oversee materials replenishment, quality standards, and performance metrics, • Maintain accurate documentation, report production hours, and monitor employee timekeeping, ensuring compliance with policies and tracking overtime, • Direct workers in electrical, electronic, mechanical hydraulic and pneumatic maintenance and repair of machinery and equipment, • Assist and direct workers in diagnosis of malfunctions in equipment and machinery, • Interprets company policies and safety regulations to ensure compliance and safe work environment, • Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed Job Requirements • Minimum 3+ years industry and general office experience, • Knowledge of construction products, computers, basic accounting, and inventory, • Working knowledge of manufacturing / production plants preferred, • Employee management experience preferred, • Ability to read blueprints, wiring diagrams, process sheets, and assemble schematic drawings, • Bilingual (English & Spanish) preferred Warehouse Supervisor - Kearny, NJ Salary: $20-$21 depending on experience Hours: 2nd Shift Monday thru Friday 3pm-11pm OR Monday thru Thursday 3pm-1am Requirements: • Bilingual English-Spanish a must, • Food industry background, • Warehouse Lead experience needed Ready to grow your career in logistics? Apply Today! Submit your resume for consideration Call | Staffing Alternative 848.328.5400 Visit | 505 North Broad Street, Elizabeth NJ Email | elizabeth@saworks.com

Job Description This is a rare chance to join our client, a globally recognized aerospace manufacturer that has spent 75+ years pushing the boundaries of turbine engine technology. Consistently ranked among the world's best employers, this publicly traded organization backs that reputation with a culture that genuinely prioritizes its people. What's in it for you? • Stability and momentum — a growing public company with deep industry leadership, • Benefits that start on day one: premium health coverage and a 9% 401(k) match — one of the strongest in the industry, • Employer-funded retirement savings contribution each pay period, • A workplace culture built around collaboration, inclusion, and continuous improvement, • Structured development programs to help you grow into your next role, • On-site fitness center access at participating locations Job Summary: The selected candidate will report to the Plant Manager and provide managerial and leadership support to the Procurement and Supply Chain Team to ensure Business Unit goals are met through the execution of procurement strategies. Procurement strategies include, but are not limited to, securing supply, cost savings, process optimization, and supplier risk mitigation. The overall goal is to support the production schedule while obtaining the best achievable value for supplies and services while maintaining compliance with company procedures. Environmental Health & Safety Responsibilities: • Expected to assist in the implementation of the company's EHS value and policy statement and its accompanying principles., • Comply with all department, facility, corporate, and regulatory EHS regulations., • Wear all required personal protective equipment., • Report all job-related illnesses and injuries (per employee handbook)., • Report all Safety, Health & Environmental concerns to your supervisor promptly., • Attend all EHS training. Responsibilities: • Directly responsible for the overall Plant procurement operations, which includes direct, indirect, and Capital spend., • Provide guidance and leadership to Plant Procurement Specialists and Supply Chain Planners., • Collaborate with the value stream (Operations, Maintenance, Engineering, Quality, Finance, etc.) to ensure procurement strategies align with Plant and BU goals., • Share savings targets of plant-specific spend with Location Management, Category Management, and stakeholders., • Manage supplier sourcing, negotiations, contracting, and the execution of agreements to support plant requirements., • Monitor supplier performance and place countermeasures to resolve any issues that may arise., • Communicate supplier issues to BU Procurement, Category Management, and Quality., • Review Plant Procurement metrics and take the necessary actions to ensure Plant and BU targets are met., • Responsible to ensure Procurement retains compliance with all auditing agencies., • Ensure the successful execution of ERP-related procurement processes including system enhancement implementations., • Responsible for Raw Material forecasting, inventory management, cost management, and researching potential BOM issues affecting inventory accuracy., • Oversee ERP item and raw material transactional activity to drive inventory accuracy — including accurate cycle count program monitoring and maintenance for raw materials., • Manage project-related teams and plant procurement and supply chain initiatives., • Ability to be flexible and manage competing priorities well; understand how to balance various deadlines and tensions both within the business and between the business and its partners. Qualifications BASIC QUALIFICATIONS: • Bachelor's degree from an accredited institution in Business, Management, Supply Chain, Logistics, IT, Politics, Policy, Finance, Accounting, Data Science/Analytics, Marketing/Communication, Economics, Mathematics, or Engineering., • Minimum 6 years' experience in Procurement or Supply Chain., • Knowledge and understanding of procurement and financial best practices and compliance (Sarbanes-Oxley, UCC Laws, Import/Export Laws, etc.)., • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position., • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items. PREFERRED QUALIFICATIONS: • Procurement experience working in a fast-paced manufacturing environment., • Ability to write and negotiate complex contracts for the obtaining of goods and services., • Experience in Oracle or a similar type of Enterprise Business System., • Willingness to frequently visit the shop floor for a better understanding of Plant operations., • Customer-oriented personality., • Integrity and operates with utmost ethics; trustworthy; advocates for and complies with laws and audit functions; reports accurately; abides by agreed terms and conditions. About Augmentis Augmentis is a specialized recruiting firm focused on accounting, finance, procurement, and engineering talent across the U.S. We partner with growthoriented companies to match highimpact professionals with meaningful roles. To learn more about Augmentis, visit our website: www.augment-is.com Representation/employer clarification: Augmentis is conducting this search on behalf of our client. The selected candidate will be employed directly by our client, not by Augmentis. EEO + disclaimer Our client and Augmentis are Equal Opportunity Employers. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. This job posting does not constitute a contract or guarantee of employment, and role details are subject to change based on our clients' needs. By applying, you acknowledge that your information may be shared with our client for recruitment and hiring. Text Message Consent & Privacy As part of your application, you'll have the option to receive text updates about your status, screening, and scheduling. This is optional; it is not required to apply. See our Privacy Policy and SMS Terms & Conditions for details on how your information is used and protected.

Job Description Pay: $50,000.00 - $60,000.00 per year Job description: This is a newly created position intended to supplement a great staff and an expanding staff. We are seeking an experienced and motivated Supervisor to help oversee daily plant operations . The ideal candidate is a strong leader with experience in high-speed manufacturing environments and the ability to drive safety, quality, productivity, and continuous improvement initiatives. This role is responsible for supervising production activities, ensuring compliance with company policies and regulatory requirements, supporting employee development, and maintaining efficient plant operations in a fast-paced manufacturing environment with over 150 employees. Bilingual English/Spanish communication skills are strongly preferred. Key Responsibilities • Plan, organize, and supervise daily second shift production operations to meet production and customer goals, • Monitor production performance, quality standards, and on-time shipment requirements, • Promote and enforce workplace safety policies and procedures, • Optimize labor, equipment, and material resources to maximize productivity and minimize waste, • Identify operational inefficiencies and implement corrective actions and continuous improvement initiatives, • Analyze production data, downtime, scrap, and overtime trends to improve operational performance, • Ensure compliance with FDA, USDA, GMP, sanitation, and company standards, • Partner with maintenance, quality, warehouse, and management teams to support efficient plant operations, • Train, coach, and develop production employees while maintaining accountability and performance standards, • Address employee relations and performance matters in accordance with company policy, • Maintain accurate production and operational records, • Stay informed on manufacturing best practices, safety standards, and operational improvements, • Foster a respectful and inclusive multicultural work environment, • Overtime will be often required Qualifications • 3+ years of supervisory or management experience in a manufacturing environment preferred, • Experience in food, pharmaceutical, cosmetic, or other high-speed manufacturing environments strongly preferred, • Experience with high-speed packaging and/or filling equipment strongly preferred, • Knowledge of plant operations including HVAC, refrigeration, sanitation, and GMP compliance, • Strong leadership, communication, problem-solving, and organizational skills, • Ability to work effectively in a fast-paced environment, • Bilingual English/Spanish skills required to be successful, • Must be available to work overtime as needed Physical Requirements • Ability to stand, walk, bend, and lift up to 50 pounds as needed, • Ability to work in a manufacturing and warehouse environment with varying temperatures Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Experience: • Food Manufacturing : 3 years (Required) Language: • Spanish and English (Required) Ability to Commute: • Union, NJ 07083 (Required) Work Location: In person \nCompany Description Deep Foods is a major food manufacturer based that specializes in prepared Indian foods and frozen food products. Since 1977, we have been dedicated to delivering high-quality products through innovation and a commitment to excellence. Our mission is to bring authentic Indian cuisine to consumers nationwide while maintaining the highest standards of quality and safety. Deep Foods is a major food manufacturer based that specializes in prepared Indian foods and frozen food products. Since 1977, we have been dedicated to delivering high-quality products through innovation and a commitment to excellence. Our mission is to bring authentic Indian cuisine to consumers nationwide while maintaining the highest standards of quality and safety.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 97 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role The Warehouse Supervisor leads the day-to-day operations of the Cranford facility's warehouse and production floor, ensuring customer orders and production goals are met on time, at an efficient cost, and to a high standard of safety and quality. This role oversees staffing, workflow, facility conditions, and team development across warehouse fulfillment and production teams, and serves as the on-site leader in the absence of other operations leadership. This role reports to the Sr. Operations Manager. In case of an absence, then the Production Supervisor will serve as the backup. This is a full-time position with scheduled hours of 7:00 a.m. to 5:30 p.m. Sunday-Thursday. The schedule may be subject to change based on organizational and operational needs. How you'll make an impact Team & Production Management • Lead daily kickoff meetings to communicate goals, priorities, and relevant announcements to the team, • Build weekly and daily staffing plans that align headcount and schedules to forecast order and production volume across teams, • Manage the team to ensure all orders and production runs are completed on time, at an efficient cost, and with high quality, • Delegate tasks effectively across leads and teams to maintain workflow and optimal use of resources, • Review employee hours and staffing schedules to minimize cost to operate the facility (e.g., reduce unnecessary overtime and temp hours), • Track key performance indicators and audit completed work (e.g., packed orders) to identify and correct deviations from quality standards, • Identify opportunities for process improvement, waste reduction, and increased efficiency People Leadership • Maintain employee hours, attendance tracking, and other HR-related needs, • Develop team members' skills to solve day-to-day operational issues and support short- and long-term goals, • Maintain open, frequent communication with employees and use engagement survey feedback to guide areas of focus, • Provide coaching, feedback, and discipline in partnership with leads to support employee performance and adherence to SOPs, safety guidelines, and policies, • Partner with management to recruit and hire new employees, • Train employees and provide ongoing coaching to support continuous improvement, • Communicate terminations when necessary and complete associated processes (e.g., PAFs, manager notifications) Facility, Safety & Quality • Ensure SOPs, GMPs, and OSHA regulations are followed for material movement from raw materials through production to finished product, • Respond to operational and safety concerns, including safety incidents, in a timely and proactive manner, • Maintain a clean, safe working environment and complete facility walk-throughs, including opening/closing procedures, alarm checks, and equipment checks (e.g., charging stations, ice levels, temperatures), • Collaborate with the maintenance team to keep equipment in good condition and minimize downtime, • Oversee facility systems and equipment issues (e.g., alarm system, HVAC, internet) and manage the relationship with the property manager, escalating as needed, • Ensure trucks are unloaded and shelved in a timely manner, and that inventory is accurately maintained for restocking and picking, • Process return shipments and communicate with Customer Experience as needed Cross-Functional & Administrative • Serve as supervisor on duty for the warehouse or production floor as needed, and act as backup coverage across functions in the absence of other leaders, • Attend weekly Operations meetings to stay current on company-wide information and relay relevant updates to the team, • Maintain regular and predictable attendance; may require off-shift work and occasional operation of manufacturing/warehouse equipment What you'll bring • High School Diploma or equivalent; certifications in food safety or manufacturing a plus, • 3–5 years of experience in a production or warehouse setting, preferably in the food industry, • 2–3 years of supervisory or team management experience, • Knowledge of food safety regulations and experience with HACCP or similar food safety systems, • Computer proficiency including Google Suite (Gmail, Calendar, Drive, Docs, Sheets, Slides), • Strong technical and problem-solving skills, with the ability to track KPIs and manage staffing to demand, • Bilingual – Spanish is a plus!, • Ability to lift up to 50 lbs, as needed, • Willingness to work in an environment with exposure to product allergens (including nuts, powders, etc.) What we offer • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Annual Salary Range: $65,000 - $70,000 plus annual bonus, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • All the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, immigration status, age, sex or gender (including pregnancy), gender identity or expression (including transgender status), sexual orientation, marital status, veteran status, physical or mental disability, genetic information, or any other characteristic protected by applicable federal, state, or local laws. Applicants with disabilities who require assistance or accommodation during the application or interview process should reach out to us at people@nuts.com

Job Description LAB TECHNICIAN I Description: The Lab Technician I is a position that works in a high performance, customer focused Team environment and is responsible for conducting the daily tasks associated with the Quality Assurance laboratory to maintain the high quality of products produced by our company. The Lab Technician I will be responsible for the inspection of raw materials, ingredients and products manufactured to ensure compliance with all internal and customer required specifications through the excellent performance of assigned duties. These actions are to be performed while keeping safety as a primary objective and following all established Good Manufacturing Practices (GMP’s), Regulatory, and Company policies and procedures. As an integral member of the Quality Control Team, the Lab Technician I plays a pivotal role in ensuring that a high level of collaboration and flexibility occurs between the QC Team and all other support and production departments to not only meet but exceed the operational and production goals set for the facility while making sure that the Quality of our products and the safety of ourselves and others remain a top priority. Essential Duties & Responsibilities: Responsible for supporting the plant's food safety culture and complying with all food safety, quality, and regulatory requirements applicable to the position. Approving incoming components by confirming all materials meet required specifications; this is done through conducting both visual and measurement tests; responsible for rejecting and returning all unacceptable materials. Confirms all in-process production meets required specifications and approves products when visual and measurement tests have proven product meets designated stipulations; must effectively communicate any and all required adjustments to the Production Supervisor. Approves finished products by confirming specifications are met and conducting visual and measurement tests; prepares certificates of analysis and any certificates of compliance as needed. Documents inspection results by fastidiously completing reports and logs accurately and with timeliness. Excellent data entry skills required for inputting accurate and detailed data into the quality database The ideal candidate will be proactive in discovering deviations from company and customer standards and providing immediate notification to operators and supervisors Responsible for monitoring and inspecting process control points, critical control points, and essential quality attributes, an employee in this role must be familiar with all the essential quality attributes of Stratas Foods products. Keeps measurement equipment operating by following operating instructions; calibrating equipment and assist with submissions of work orders when needed. Collects and submits samples to outside laboratories as needed. Maintains safe and healthy work environment by following standards and procedures, complying with legal regulations. Accomplishes quality and organization mission by completing related results as needed. Verifies cleanliness of equipment while working in conjunction with sanitation personnel. Necessary training will be provided to ensure proper onboarding. Qualifications: High school diploma, GED required AAS or BS degree in a laboratory science (e.g. in microbiology, biochemistry, biology, food technology), or Experience as a QA Technician in a food or like manufacturing (consumer products) environment or equivalent experience in an industrial lab required, minimum of 2 years. Auditing experience preferred but not required. Demonstrated technical knowledge in Quality Processes and systems including but not limited to SPC, HACCP, Operating procedures, and Manufacturing practices. 2-3 years of experience in a similar industry Desired Skills: Ability to work with minimal supervision in a fast-paced environment Ability to make objective and independent decisions Ability to read, write, and comprehend written instructions, product specification sheets, work instructions, technical documents, and manuals. Bi-lingual English / Spanish preferred Strong written and verbal communication and interpersonal skills. Ability to introduce information to a group or in a group meeting, perform training to new employees, and assist in preparing new procedures, work instructions, etc. Demonstrated ability to perform consistent accuracy with detail-oriented work. Ability to prioritize multiple tasks and organize work efficiently. Fundamental computer skills (data entry, MS Office including Excel) Proficient with an Enterprise Resource Planning (ERP) system experience will be helpful. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the minimum knowledge, skill, and/or ability required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers; reach; stretch; bend; kneel; crouch; climb; balance; etc. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required include close vision, color vision and peripheral vision. Working Conditions: Plant operations, environment, and hours. Able to manage through urgent situations. The job is performed mostly in a manufacturing plant environment. Exposure to loud noises, dust, dirt, heat, sparks, oil, and smoke may occur. Earplugs / ear protection required in this area. Personal protective equipment (safety glasses, steel-toed shoes, appropriate clothing) is required in manufacturing plants.

Job Description Is this you? • Do you thrive on catching issues before they become problems—starting with a thorough pre-op?, • Can you coach teammates on inspection techniques and documentation that stand up in any audit?, • Are you skilled at verifying sanitation and interpreting environmental monitoring trends?, • Do you love turning deviations into learning moments through root cause analysis? The opportunity We’re searching for a hands-on Food Safety & Quality Technician to uphold our enterprise standards and our hallmark “Grandma Quality.” You’ll partner with the Supervisor to guide Associates, maintain airtight FSQA records, and support audit readiness while production hums. What your day might include • Pre-operational inspections, in-process checks, and finished product evaluations., • Verification of sanitation completion; review of environmental monitoring outcomes., • Accurate FSQA recordkeeping and assistance preparing for audits., • On-the-floor training of Associates in inspection and documentation best practices., • Immediate reporting of deviations and collaboration on root cause analysis. Your toolkit, • High school diploma or equivalent; technical food safety training a plus., • 2+ years of QA/FSQA experience in food manufacturing., • Knowledge of HACCP, GMPs, and foundational microbiology., • Comfort navigating FDA and USDA regulations. Work environment & physical demands, • Capable of standing, bending, and lifting up to 40 lbs., • Work in cold and hot production areas while consistently wearing PPE. Schedule, status, and benefits, • Job Type: Full-time, • Shift: Must be available to work from 4 AM to 1:00 PM, • Benefits: 401(k), Employee discount, Health insurance, Paid time off, Parental leave Why Mama’s Creations Mama’s Creations, Inc. (NASDAQ: MAMA) supplies fresh deli prepared foods to more than 8,500 grocery, mass, club, and convenience stores across the U.S. Originating from the Mama Mancini’s legacy, our brands deliver high-quality, fresh, clean, and easy-to-prepare meals. We aim to be the deli’s one-stop solutions partner—leveraging vertical integration and a diverse brand family to meet modern consumer demand. Discover more at https://mamascreations.com.

We are recruiting an experienced CNC Swiss Machinist / CNC Shop Manager for a growing precision machining company. \n \n This is a highly hands-on shop-floor leadership position for someone who can combine CNC Swiss machining expertise with day-to-day production leadership. The successful candidate will spend the majority of the day in the shop, working directly with machines and employees—not managing operations from an office. \n \n We are particularly interested in an experienced Swiss machinist, lead machinist, shop foreman, manufacturing supervisor, or shop manager who is comfortable setting up and operating equipment, troubleshooting machining issues, and keeping a high-mix production environment moving. \n \n CNC programming capability is highly desired. \n \n What You’ll Do: \n\n • Lead day-to-day machine shop operations while remaining actively involved on the production floor\n, • Set up and operate CNC Swiss screw machines to support production requirements\n, • Review drawings, specifications, tolerances, and job requirements before production\n, • Coordinate daily production schedules, machine assignments, manpower, materials, and job priorities\n, • Support frequent setups, short production runs, custom work, rush jobs, and changing customer requirements\n, • Troubleshoot machining, tooling, setup, quality, and production issues\n, • Program or modify CNC programs when needed, depending on experience\n, • Work with tooling, speeds and feeds, workholding, and machining processes to improve performance\n, • Perform and support first-article and in-process inspection using precision measuring equipment\n, • Ensure finished components meet print, tolerance, and quality requirements\n, • Monitor machine utilization, setup and cycle times, labor efficiency, scrap, rework, and overall shop productivity\n, • Identify bottlenecks and adjust production priorities to keep work flowing\n, • Coordinate preventive maintenance and equipment repairs to minimize downtime\n, • Train, develop, and provide day-to-day direction to machinists, operators, and other shop employees\n, • Drive improvements in setup time, cycle time, quality, throughput, and overall manufacturing efficiency\n\n \n Preferred Background: \n\n • Strong hands-on experience with CNC Swiss screw machining\n, • Experience setting up and operating Swiss-style CNC equipment\n, • Ability to program CNC equipment is highly desired\n, • Experience with CAM-based and CNC Swiss machining environments\n, • Strong understanding of CNC machine tools, Swiss machining processes, tooling, workholding, feeds and speeds, and machine setup\n, • Ability to read and interpret engineering drawings, GD&T, dimensions, tolerances, and manufacturing specifications\n, • Skilled with micrometers, gauges, and other precision inspection and measuring equipment\n, • Experience troubleshooting machining problems and refining setups and processes\n, • Background in a high-mix, low-volume or job-shop manufacturing environment with frequent setups is strongly preferred\n, • Previous experience as a Lead Machinist, Shop Foreman, Manufacturing Supervisor, Production Manager, or hands-on Shop Manager is beneficial\n, • Experience scheduling and prioritizing multiple jobs across machines and production resources\n, • Understanding of estimated versus actual machining hours, production efficiency, scrap, and job costs\n, • Experience machining small-diameter precision components is valuable\n, • Plastics machining experience is preferred but not required\n, • Strong shop-floor leadership and the ability to work directly alongside the production team\n\n \n Compensation & Benefits: \n\n • $80,000–$140,000 base salary, based on experience and technical capabilities\n, • Medical benefits\n, • 401(k) with employer matching\n, • Paid time off and company holidays\n, • Discretionary bonus opportunity\n, • Full-time, stable employment\n, • Opportunity for continued professional growth\n\n \n This opportunity is particularly well suited to someone who has developed strong CNC Swiss machining skills and is ready to combine those capabilities with broader responsibility for people, production, quality, scheduling, and overall shop performance. \n \n If you are a hands-on machining professional who enjoys solving problems on the shop floor and leading by example, we would welcome the opportunity to speak with you.

Job DescriptionJoin the FM Expressions Team as a Warehouse Associate! Location: 565 Windsor Dr., Secaucus, NJ 07094 Job Type: Full-Time Pay Rate: $18.00 + Shift: Monday to Friday 6:30AM - 3:00PM Are you an experienced forklift operator who takes pride in keeping a warehouse organized, safe, and running efficiently? FM Expressions is looking for a Warehouse Receiving Specialist to join our team! In this role, you'll help keep our warehouse operations moving by receiving and organizing incoming materials, maintaining inventory, picking apparel and products according to customer requirements, and safely transporting materials throughout the facility. If you're dependable, safety-conscious, organized, and enjoy hands-on work in a fast-paced manufacturing environment, we'd love to hear from you! What You'll Do • Safely operate forklifts to move materials, products, and inventory throughout the facility., • Load and unload incoming and outgoing warehouse items., • Receive and organize incoming orders and materials., • Pick and stage apparel and products according to customer requirements., • Locate and move inventory to designated storage areas, pallets, or crates., • Maintain organized storage areas and ensure products are stored in the appropriate locations., • Transport materials between the warehouse and different areas of the facility., • Secure loads properly before transporting materials., • Inspect products and materials for visible damage, shortages, or quality issues., • Report damaged products, shortages, discrepancies, or other inventory concerns to the appropriate supervisor., • Assist with inventory organization and maintaining accurate stock levels., • Ensure materials are available and properly staged for production and customer orders., • Follow proper warehouse and material-handling procedures., • Maintain a clean, safe, and organized work area using FM Expressions' 6S system., • Communicate professionally and respectfully with coworkers, supervisors, and other departments., • Help identify and resolve warehouse-related challenges and roadblocks., • Follow all forklift and workplace safety procedures., • Perform additional warehouse and production-related duties as assigned.What We're Looking For, • Valid forklift certification., • Previous warehouse or forklift experience preferred., • Strong hand-eye coordination and ability to safely operate material-handling equipment., • Excellent organizational skills and attention to detail., • Ability to follow written and verbal instructions., • Ability to accurately identify products, labels, quantities, and storage locations., • Ability to work independently and as part of a team., • Strong communication and problem-solving skills., • Dependable attendance and a positive attitude., • Ability to work in a fast-paced manufacturing and warehouse environment., • Willingness to adapt to changing operational needs and schedules.Physical Requirements, • Stand and walk for extended periods of time., • Lift, move, load, and place materials weighing up to 50 pounds., • Operate a forklift for extended periods., • Bend, twist, reach overhead and below the knees, pull, push, and perform repetitive movements., • Grasp, turn, and manipulate objects of varying sizes and weights., • Use fine motor skills and hand-eye coordination., • Visually inspect products, equipment, labels, and documentation, including small print., • Work around warehouse and production equipment.Tools & Equipment, • Forklift and other material-handling equipment., • Laptop/computer provided by FM Expressions., • Required Personal Protective Equipment (PPE) provided by FM Expressions.Work Environment FM Expressions facilities are well-lit and well-ventilated. This position works primarily in a warehouse and manufacturing environment and requires extended periods of standing and physical activity. Employees may be exposed to moderate to loud noise, moving mechanical equipment, fumes, chemicals, heat, and cold. Working around large machinery and powered industrial equipment can present hazards, so employees are expected to consistently follow all safety procedures and maintain safe work practices. Why FM Expressions? At FM Expressions, we believe our employees are our greatest asset. We offer: • Competitive pay, • Comprehensive benefits package, • Paid time off and holidays, • 401(k) with company benefits, • Career growth opportunities, • On-the-job training, • Supportive team environment, • Stable, full-time employmentReady to Move Your Career Forward? If you're a safety-conscious forklift operator who enjoys keeping inventory organized and making sure the right materials get to the right place at the right time, apply today and become part of the FM Expressions team! #hc259795

Job Description Duties of the packer position include operating the packer to fill bags of product, operating the sewing machines to seal bags, operating and adjusting bag top formers, operating palletizers, operating ink jet printers and Label Machines. The position of packer is responsible for weights of bags, sealing of bags, coding of bags, correct labeling of product, checking to be sure the correct bags are being packed, volume of output and keeping work area neat and clean. Packers may be assigned other duties as needed by the supervisor. FOOD SAFETY/SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. • To ensure this, all employees are required to be trained on and adhere to the “Good Manufacturing Policies” set forth by the Company as they pertain to personnel practices, equipment, and facilities., • It is also vital that all employees be aware of their work environment to prevent any accidental or intentional adulteration of products produced at the facility. SAFETY • While performing the essential job functions, the employee is expected to work in a safe manner and follow company policies regarding safety., • It is the expectation and responsibility of the employee to work safely and report any and all injuries immediately to their supervisor and to report any safety situation that the employee feels is substandard and poses a risk for employee injury, property damage, or loss. TEAMWORK • Ensures that appropriate individuals are informed about matters impacting their areas of responsibility; works well with others; shares knowledge and experience with others; demonstrates respect and consideration for others’ opinions; contributes to the overall task of the team., • Demonstrates integrity; works effectively in teams; facilitates inter-departmental cooperation; cooperates with supervisors and peers to accomplish work assignments; helps create and maintain effective working relationships. DEPENDABILITY • Follows through on tasks; requires minimum supervision and follows instructions and procedures. Arrives at work on time; follows company policies including vacations and leaves. Observes Company rules; completes tasks within deadlines. QUALIFICATIONS To perform the job of packer successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Needs to be able to communicate both verbally and in writing in English., • Needs to be able to perform basic math functions, with or without the aid of a calculator., • Needs to be capable of learning to perform computer entry., • Needs to be an independent worker with self-initiative to carry out job functions., • Must be willing to rotate shifts to cover absences if required. EDUCATIONAL REQUIREMENTS • Possess a high school diploma or equivalent (GED). Possess strong analytical skills., • Must be willing to learn the Company’s DBC computer system. LANGUAGE SKILLS • Must be capable of communicating and following written and verbal instructions. Must be able to read safety rules, operating and maintenance instructions, technical procedures. MATHEMATICAL SKILLS • Capable of performing basic math functions, with or without the aid of a calculator. Ability to work with mathematical concepts and apply concepts such as addition, subtraction, multiplication, division, fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY • Ability to define and solve problems collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables at any given time., • Ability to apply common sense understanding to carry out training instructions furnished in written, oral, or diagram form. PHYSCIAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to work in an environment which has extremes in temperature., • Be able to climb ladders., • Must have physical dexterity to perform basic repair functions., • Be able to stand for extended periods of time., • Frequently required to bend, stoop, kneel, crouch or crawl., • Constantly required to twist torso., • Frequently required to lift and or move 100-pound bags., • Vision requirements are close vision, distance vision, color vision and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, and fumes or airborne particles. The employee is exposed to vibrations. The employee is occasionally exposed to high precarious places. The employee will be exposed to extremes in temperature, both hot and cold. The work environment is noisy, at times in excess of 100 decibels. FOOD SAFETY / SECURITY REQUIREMENTS: The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained in and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of the work environment and when possible, prevent accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put the product on hold if they have a concern. At the plant level, only the Quality Assurance Manager and General Manager have the authority to release products on hold.

Job Description Pay Rate: $25.54 + this role offers a 12% shift differential Basic Function: To blend ingredients according to formulas provided. Duties: • Mixes materials according to formulas using heating and chilling methods. Checks materials to ensure color, odor and other characteristics are exhibited in accordance with customer requirements. Processes, filters and samples material as needed., • Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) and internal safety guidelines and training, including (but not limited to) the maneuver and handling of all containers with proper material-handling equipment, duties involving hazardous wastes, etc. Maintains neat, orderly and clean shop floor and workplace at all times. Reports any issues or problems to management., • Maintains accurate records of all work functions performed. Logs information as required on daily work sheets. Takes inventory of material and makes or reports corrections as needed. Performs other duties as required , such as dispensing and material handling. Minimum Education/Experience/Skills/Job Knowledge: • High School Diploma or equivalent is required, with proficiency in basic mathematical skills (Metric vs. English system), • 2 - 4 years related experience in production environment., • Product knowledge including color and odor is preferred, as well as familiarity with computer functions/menus and automated systems are required., • Trained and knowledgable in dispensing or batch-processing manufacturing, bar coding, automated dosing systems and forklift operation., • Basic knowledge of interrelationship between room operations and Bioton, WWTP, and Tank Farms is preferred., • Must be capable of performing routine work assignments, multi-tasking and following instructions with moderate supervision., • Must be hard-working, self-motivated, committed to quality, and recognize the impact of day-to-day activities on the shop floor on customer satisfaction., • Must produce volume within established standards and schedules., • Clear communication skills (verbal and written), promptness, consistent attendance and willingness to work overtime are required., • Must understand work procedures, methods, use of required equipment and computerized work instructions., • Must be committed to quality and possess the ability to recognize bad or poor ingredients and maximize the use of available resources to increase productivity. Working Conditions: Exposure to hot and cold environments, weather, fumes, dust and gases are frequent. May be required to wear respirator for chemical exposure. Effect of Errors: Failure to follow safety or hazardous waste training procedures may lead to injury to self or others, loss of production and / or manufacturing expense. Failure to produce an acceptable volume of product may result in shipping delays to customers. Physical Demands/ Dexterity: Must be able to lift up to 50 lbs. and manipulate, push/pull and roll containers that weigh up to 500 lbs. Frequent standing, walking, reaching, bending, lifting, pushing, pulling, grasping, and crouching is required. Use of foot pedals and typing on a computer may be necessary. Equipment Used: May be required to wear respirator or use forklift as directed. Various automated compounding equipment. Responsibility for Work of Others: No direct supervisory responsibilities, however, must be a team player. Reporting of observation of non-compliance or unsafe situations to supervisor or safety manager required.

Job Description Hi, we're Nuts.com! Nuts.com is a self-funded, profitable, rapidly growing multi-channel DTC specialty food and wellness company with over 550 people on our team. We're changing the landscape of snacking on nuts, dried fruit, chocolate and more! We planted our roots in Newark, New Jersey during the Great Depression, selling premium nuts on Mulberry Street's open-air market. We've come quite a long way since then, taking our multi-generational family business online in 1999. Even after 96 years, we continue to pride ourselves in expertly sourcing the highest quality foods and treating our customers like family. What's our team like? We're driven, collaborative and entrepreneurial. Energy and passion power our business and we look for candidates who share in that excitement to help us continue to build something special. The role: The Sanitation Associate is an integral part of the Cranford team, responsible for maintaining a clean, safe, and sanitary environment. This role ensures that all production equipment, tools, and facility areas meet strict cleanliness and hygiene standards in compliance with food safety regulations, company policies, and industry best practices. You will play a key role in ensuring compliance with local, state, and national food safety regulations, including the Food Safety Modernization Act (FSMA). In the event of an absence, this role will serve as the primary backup for other Cleaning & Sanitation associates. How you'll make an impact Sanitation: Clean and sanitize assigned areas, production equipment, and tools within the manufacturing facility to prepare for smooth operations, while strictly following safety rules, Standard Operating Procedures (SOPs), and Good Manufacturing Practices (GMP) guidelines. Complex Cleaning Environments: Perform cleaning tasks that may require working in tight spaces, climbing ladders, and working at heights to ensure all areas of the facility are reached. Equipment Operation: Operate floor scrubbers and Powered Industrial Vehicles (PIVs), including forklifts, pallet jacks, and scissor lifts. (Must be willing to learn how to operate new equipment as needed). Documentation: Accurately complete all related cleaning logs and records to document that proper cleaning procedures were followed. Compliance: Strictly adhere to proper sanitation, safe handling of chemicals, proper Personal Protective Equipment (PPE) usage, product safety guidelines, and GMPs throughout the plant. Team Support: Perform other duties as assigned by the lead/supervisor. Schedule Flexibility: Must be flexible to work different shifts. The working schedule is subject to change based on business needs. This position follows a five-day overnight schedule from 10:30 PM to 7:00 AM. What you'll bring: • Required:, • Education: High School Diploma or GED; or equivalent combination of experience and education., • Experience: At least one (1) year of experience as a cleaner in a food service or manufacturing facility., • Industry Knowledge: Demonstrated experience with GMPs (Good Manufacturing Practices) and general sanitation protocols., • Physical Requirements:, • Ability to walk and stand for extended periods., • Ability to lift up to 50 lbs., • Ability to climb stairs and ladders comfortably., • Ability to work in tight spaces and at varying heights (using scissor lifts or ladders)., • Work Ethic: Extremely detail-oriented with a strong sense of urgency to complete work in a timely manner. Must be punctual, reliable, and possess an excellent work ethic., • Highly Preferred:, • Bilingual (English/Spanish). What we offer: • A high-growth and rewarding role in a foundationally strong and rapidly evolving business, • Hourly Pay Range: $18.50 - $19.25 /hour based on experience, • Excellent benefits including a 401K Match, • Paid Maternity, Adoption and Paternity leave, • And all the Nuts.com snacks your heart desires + a 40% employee discount EEO STATEMENT Nuts.com is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, age, protected veteran or disabled status, or genetic information.

Job DescriptionQC / Packaging Operator – 2nd Shift$25.00/Hour | Monday–Friday | 3:15 PM–11:30 PM | Temp-to-HireLocation: Carlstadt, NJ Job Type: Full-Time, Temp-to-Hire Shift: 2nd Shift Pay: Starting at $25.00/hour Job Description We are currently hiring an experienced QC / Packaging Operator for our client, a manufacturing company located in Carlstadt, NJ. The QC / Packaging Operator will be responsible for performing final quality checks and packaging finished wood doors prior to shipment. The right candidate will have strong attention to detail, experience operating packaging equipment, and the ability to work efficiently in a fast-paced production environment. Responsibilities • Operate the plastic/bubble wrap packaging machine to protect finished doors., • Read and interpret job tickets and production paperwork., • Perform final quality inspections for finish, dimensions, and defects., • Verify product count, sizing, and order accuracy., • Identify and report defective or non-conforming products before packaging., • Label and stage packaged doors for shipment., • Monitor packaging materials and notify the Supervisor when supplies are low., • Maintain a clean, organized, and safe work area., • Follow all company safety and quality procedures., • Maintain production pace and meet shipping requirements.Requirements, • 3+ years of experience operating a plastic/bubble wrap packaging machine required., • Manufacturing or production experience preferred., • Ability to read and understand job tickets and production paperwork., • Strong attention to detail and quality-control skills., • Basic math skills for measurements and counting., • Ability to work in a fast-paced production environment., • Reliable attendance and punctuality., • Ability to work well independently and as part of a team.Physical Requirements, • Ability to stand for extended periods., • Ability to lift and move finished doors up to 75 lbs. with assistance as needed., • Ability to bend, reach, and use hands and arms repetitively., • Ability to safely perform the physical requirements of a manufacturing environment.

Job DescriptionDescription: The Key Objective of the Driver/Warehouse Worker is to contribute to the growth and profitability of Multi-Pak by effectively executing the functions of Warehouse. Specifically, under the general direction of the Warehouse Manager, he/she is responsible and has commensurate authority for the following: • Driving components safely between the Multi-Pak warehouses., • Ability to accurately pull components from a pick ticket for staging purposes., • Loading and unloading components between the Multi-Pak warehouses., • Shipping all finished goods prepared by Multi-Pak and signing the appropriate shipping documentation. Visually inspecting the conditions of all trucks loading Multi-Pak finished goods., • Accurately completing the Warehouse Shipping paperwork. Visually inspecting all pallets to ensure they meet client specifications., • Preparing production staging to ensure all required materials for each production run are placed in the designated staging lanes prior to the start of production., • Maintaining accurate inventory records in the warehouse., • Assisting with the investigation of any inventory discrepancies., • Assisting with the preparation of reconciliations., • Assisting with the maintenance of equipment as necessary., • Alerting Quality Supervisor and the Operations Manager if any problems arise. Working with Quality and Operations Manager to troubleshoot problems., • Complying with all SOPs and cGMPs., • Ensuring that all garbage and recyclable materials are properly disposed each day., • Maintaining the warehouse clean and free of debris at all times. Repairing the facility as needed. RESPONSIBILITIES: Essential Functions: The Key Objective of the Driver/Warehouse Worker is achieved if the annual review shows that: • Receiving and Shipping functions are conducted efficiently, in a timely manner and according to all SOPs and cGMPs., • Pallets of components are moved safely and accurately between the Multi-Pak warehouses., • Components and Finished Goods are stored in an orderly manner to prevent confusion and product deterioration., • Accurate inventory records are maintained., • Accurate shipping and receiving records are maintained., • Staging all production rooms accurately and in a timely manner to facilitate the start up of production lines., • Warehousing problems are identified and communicated in a timely manner to ensure that appropriate action can be taken by management to correct the problem., • The Warehouse is maintained in a clean and orderly manner., • All garbage and recyclables are properly disposed of on a daily basis., • A collaborative and positive attitude is maintained. A desire to learn is exhibited. Requirements: QUALIFICATION REQUIREMENTS: • A high school graduate with actual experience in shipping, receiving and inventory management of a well-managed manufacturing company. Bi-lingual is a plus (English-Spanish). REPORTING RELATIONSHIP: Manager: Warehouse Manager Managerial Responsibility: None PHYSICAL/MENTAL DEMANDS: · Must be able to lift-up to 30 pounds frequently and 45 pounds on occasion. · Must be able to remain in the stationary position for up to 50% of the time. · Must be able to walk or stand up to 90% of the time. · The person in this position is sometimes required to function in narrow aisles or passageways while walking throughout the warehouse area. · The person in this position will need to occasionally kneel, climb, crawl, climb and/or reach to complete their job duties.

Job DescriptionCompany Description Doka USA is proud to be Certified™ by Great Place to Work®! We are committed to fostering a supportive work environment where all of our team members can thrive. As one of the world’s leading companies for developing, manufacturing, and distributing formwork solutions for the construction sector, Doka employs more than 9,000 people in over 58 countries and is part of the family-owned Umdasch Group. We Make It Work. Job Description Summary Of Position The Driver reports to the Branch Yard Operations Manager. The Class A Driver is responsible for their specifically assigned, hands-on tasks, ensuring accuracy and efficiency of the work performed, and ensuring that safety and quality standards are upheld and maintained. Driver Responsibilities • Able to work flexible hours., • Must possess a valid CDL license at all times., • Conducts and documents daily truck inspections., • Obeys all motor vehicle laws, especially for commercial driving., • Ensures loads are properly secured on the vehicle when leaving the yard and returning from job sites., • Driver is required to carry an updated card stating that he/she has had an annual physical that meets the DOT requirements., • Understands how, is capable, and maintains DOT-required logs., • Takes responsibility for the proper use, maintenance, and safety of all vehicles and equipment., • Complies with Federal, State, and Doka loading, unloading, safety, driving, and traffic regulations., • Ensures equipment is and will be functioning properly and is placed and returned to its proper location in the yard., • Regularly required to reach with hands and arms: climb or balance, and stoop: kneel and/or crouch Other Responsibilities/Peripheral Functions • Properly follows maintenance procedures., • Properly wears all required personal protective equipment, • Immediately reports all incidents, accidents, unsafe work conditions, problems, or concerns to the immediate supervisor., • Willingly participates in all mandatory training classes., • Consistently maintains a clean, well-maintained, and organized work area., • Consistently complies with all safety requirements, • Must be able to work a flexible schedule and work overtime hours as required., • Other duties/projects as assigned, including participating in company committees/teams., • Complies with all company policies, business, and safety practices.Qualifications Qualifications • High school graduate., • Must possess a valid Class A CDL and state motor vehicle licenses at all times., • Minimum 5 years of experience with a safe driving record in commercial driving with a Class A CDL license., • Able to read maps and possess a keen sense of direction., • Excellent communication skills, including an excellent command of English (speaking, reading, writing). Bilingual Spanish a plus., • Complies with Doka Standards regarding bundling and stacking requirements, including quality, safety, accuracy, productivity, etc., • Team player., • Able to work independently in a results-driven, fast-paced environment. Additional Information Doka offers terrific career opportunities, competitive compensation, comprehensive benefits including medical, dental, vision, Flexible Spending Account, company paid life insurance, supplemental voluntary term life insurance, 401k retirement plan (Roth and Non-Roth), short-term disability, AFLAC policies, paid time off (sick/personal, vacation, floating holiday and company paid holidays) and an exciting opportunity to join as a member of Doka's team. In accordance with applicable state and local pay transparency laws, Doka USA Ltd. is committed to providing a clear and equitable compensation structure. The union hourly rate for this position is $28.21/hr, which is based on a variety of factors, including but not limited to, the candidate’s experience, qualifications, skills, and geographic location. After a twelve-month probationary period, the hourly rate will increase to $36.99/hr per the union agreement in place. This range represents the base pay for the position and does not include potential bonuses, commissions, benefits, or other forms of compensation. Final compensation will be determined at the time of offer and in accordance with internal equity and market data If working with some of the most impressive construction projects in the US and joining an industry leader excites you, please submit your resume by clicking below. Visit us online at www.dokausa.com for additional information on Doka USA, Ltd. Doka USA, Ltd. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. If you are interested and have a strong competitive drive, positive attitude, a desire to learn and grow from your experiences, then this is your opportunity to make an immediate difference. Please submit your resume and apply now. External candidates must be authorized to work for any employer in the USA. At Umdasch Group, we are convinced that diverse teams drive performance and are key to our global success. It’s their attitude and their contributions that matter. Regardless of any personal characteristics, people who share our values and are committed to working passionately towards our common goals will find space to grow. We believe in – and are committed to – equal opportunities for everyone.

Job Description WNC Laundry LLC is seeking an experienced and motivated Floor Supervisor to oversee daily production operations in our fast-paced commercial laundry facility. The Floor Supervisor is responsible for leading production staff, ensuring quality standards are met, maintaining safety procedures, and achieving production goals while promoting a positive and productive work environment. The ideal candidate will have prior supervisory experience in a manufacturing, warehouse, production, or laundry facility and possess strong leadership and organizational skills. Essential Duties & Responsibilities • Supervise and coordinate daily activities of production employees., • Monitor workflow to ensure production goals and deadlines are met., • Train, coach, and motivate employees to maintain productivity and quality standards., • Enforce company policies, procedures, and safety regulations., • Conduct regular floor inspections to ensure cleanliness, organization, and compliance., • Monitor employee attendance, performance, and work assignments., • Address operational issues and resolve employee concerns in a professional manner., • Communicate production updates and staffing needs to management., • Assist with scheduling, shift coverage, and labor allocation., • Ensure proper handling of customer products and company equipment., • Complete production reports and other required documentation., • Support continuous improvement initiatives to increase efficiency and productivity. Qualifications • 2–5 years of supervisory experience in a manufacturing, warehouse, production, commercial laundry, or related environment., • Strong leadership, communication, and problem-solving skills., • Ability to manage multiple priorities in a fast-paced environment., • Experience training and developing employees., • Basic computer and reporting skills preferred., • Ability to stand, walk, bend, and lift throughout the workday., • Strong attention to detail and commitment to quality., • Reliable attendance and punctuality are required. Schedule Requirements • Must be available to work any shift., • Must be available to work any day of the week, including weekends and holidays as needed., • Must be available for overtime when required., • WNC Laundry LLC operates 24 hours a day, 7 days a week. Background Check Requirement WNC Laundry LLC conducts pre-employment background checks for all candidates. Would you be comfortable completing a background check as part of the hiring process? Compensation & Benefits • Pay is based on experience and qualifications., • Weekly Pay – Every Friday., • Medical, Dental, and Vision Benefits after 90 days of employment., • 401(k) eligibility after 6 months., • Paid Sick Time in accordance with company policy., • Opportunities for growth and advancement. Equal Opportunity Employer WNC Laundry LLC is an Equal Opportunity Employer and is committed to creating an inclusive workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected status under applicable law.

Job Description TerrAscend Corp. is a leading TSX-listed company with operations across North America, including Pennsylvania, New Jersey, Maryland, Ohio, and California through TerrAscend Growth Corp., as well as retail operations in Canada. TerrAscend operates The Apothecarium and other dispensary retail locations, along with scaled cultivation, processing, and manufacturing facilities across its core markets. Our portfolio includes well-known brands such as The Apothecarium, Cookies, Kind Tree, Legend, State Flower, Wana, Cuue, One, and Valhalla. Sound like weed be a good fit? Here’s where you come in. Our next full-time Floor Supervisor will provide compassionate, friendly, and professional customer services to our patients. Floor Supervisors assist our patients and caregivers with cannabis recommendations through the process of product selection, affects, potency, dosing, methods of consumption, and administration. Where you’ll be planted This position will be on-site in our Maplewood, NJ dispensary. Our hours of operation are 8am - 9pm/10pm 7 days per week. This role will require availability during nights, weekends, and some holidays. Why TerrAscend? Join a growing, fast-paced organization where your work makes an impact. At TerrAscend, you'll have opportunities to grow your career, collaborate with talented teams, and help shape what's next as our business continues to evolve. To be blunt, this role will be about (Responsibilities): • Assist patients, caregivers and customers with cannabis recommendations through the process of product selection, affects, potency, dosing, methods of consumption, and administration. Assist with intake of new patients, orienting new patients to TerrAscend’s policies, rules, and procedures., • Maintain thorough product knowledge and answer concerns and/or questions promptly and efficiently, referring to a dispensary healthcare practitioner or management team when appropriate. Maintain knowledge of state regulatory requirements and guidelines., • Provide excellent customer service practices to deliver a distinctive and delightful customer experience, including interpersonal habits (e.g., greeting, eye contact, courtesy, etc.) and ensure patient confidentiality and security., • Develop and maintain strong relationships with patients and caregivers by anticipating needs., • Follow established policies and procedures for customer service, staff management, patient and visitor management, inventory management, cash handling, state compliance, and safety and security guidelines., • Responsible for opening and closing procedures, daily operations i.e., LOD (leader on duty) floor zoning, and hourly tracking, as well as partners with BOH team to ensure all BOH processes are running effectively., • Assist the senior dispensary leadership as needed., • Be an effective leader in seed-to-sale tracking system, POS System, LEAF TRADE, and Ecomm platform., • Complete the required state mandated training program as well as company provided weekly, monthly, and quarterly educational trainings.To be successful in this role we know you’ll need( Requirements):, • Must meet age requirements by state as determined by the Department of Health or State Regulatory Commission, • At least one (1) year of customer service, retail, or related experience preferred, • Cannabis experience a plus, • Must be flexible regarding work schedule, including evenings, weekends, and holidays, • At least one (1) year of supervisory or leadership experience #ENGHP What We Offer Health & Wellness — Comprehensive medical, dental, and vision coverage for eligible team members. Plan for Your Future — 401(k) savings opportunities to help support your financial goals. Time to Recharge — Paid time off and company holidays for eligible team members. Grow Your Career — Learning, development, and opportunities to build your career across a growing organization. Employee Perks — Team member discounts and additional programs designed to recognize and support our people. Support When You Need It — Resources and programs focused on your overall well-being. Benefits and eligibility may vary based on employment status, location, and other applicable factors. Background Check Requirement As a condition of employment, a complete background investigation will be conducted based on the rules of the specific State in which the employee is hired. Typically, the state investigative process includes a state and federal background check. Working Conditions This position may require the ability to perform essential functions that include, but are not limited to, standing, walking, bending, reaching, and lifting. Team members may need to lift and move items, e.g., product packages, display cases, cash registers, or inventory boxes, weighing up to 50 pounds, with or without reasonable accommodation. The role may also require visual abilities to accurately handle transactions, verify product information, and maintain inventory, as well as manual dexterity for handling cash, operating point-of-sale systems, and organizing products. Employees may be required to remain on their feet for extended periods and perform repetitive hand or arm movements with or without reasonable accommodation. EEO Statement TerrAscend is an equal opportunity employer. At TerrAscend, employees and applicants are evaluated based on their qualifications, skills, and ability to perform the duties and responsibilities of the position. In accordance with applicable law, we prohibit discrimination based on sex, race, color, religion, gender, pregnancy or related medical conditions, age, national origin or ancestry, physical or mental disability, genetic information, sexual orientation, veteran status, or any other consideration protected by federal, state or local laws. Disclaimer This job description is not an employment agreement or contract. The Company has the exclusive right to alter this job description at any time without notice. The list of job responsibilities, skills, duties, requirements, and the like is not exhaustive, rather it is illustrative of the current essential functions required for the position. TerrAscend participates in E-Verify. Please review the E-Verify Participation Notice and Right to Work Notice, available in English and Spanish. E-Verify Participation Notice: https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf Right to Work Notice: https://www.e-verify.gov/sites/default/files/everify/posters/IER_RighttoWorkPoster.pdf Statement on External Recruiting Agencies TerrAscend and all affiliates do not accept blind resume submissions from external recruiting agencies. No fee will be paid to agencies who submit candidates without being under contract for an active search with TerrAscend. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Operations Supervisor II is responsible for supervising the collections activities in one or more lines of business (commercial, residential, roll-off and container delivery pick up). The Operations Supervisor II manages drivers and helpers and works Operations, Operations Supervisor, Customer Experience, Supervisor, Operation, Manufacturing, Transportation, Driver