Math jobs in New Brunswick, New JerseyCreate job alerts

What you’ll need to succeed as a Forklift Operator at XPO Minimum qualifications: • Be at least 18 years of age, • Able to do basic math calculations, with and without a calculator, • Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends Preferred qualifications: • Dock or warehouse experience in the transportation industry, • Forklift experience in a freight or less-than-truckload (LTL) environment, • Experience loading and unloading trailers, • Strong attention to detail and desire to succeed About the Forklift Operator job Pay, benefits and more: • Expected pay range: $25.04 to $30.80 per hour. Pay is on an annual step progression. Actual compensation may vary due to factors such as experience and skill set, • Shift: Monday - Friday, 2:00 AM start time, • Full health insurance benefits are available on day one, • Life and disability insurance, • Earn up to 13 days of PTO over your first year, • 9 paid company holidays, • 401(k) option with company match, • Education assistance, • This is a Motor Carrier Act Exempt position What you’ll do on a typical day: • Efficiently sort, handle, load and unload palletized and non-palletized freight, • Use appropriate motorized and manual equipment, including pallet jack and forklift, • Secure freight inside trailers using appropriate tools and supplies, • Work in a safe, efficient manner, adhering to company safety policies, • Use mobile handheld devices to scan and track shipments, • Work on a dock that is not climate-controlled for extended periods Forklift Operators are required to: • Lift freight and other objects of various shapes, sizes and weights (frequently up to 50 lbs. and occasionally greater than 70 lbs.), • Safely walk and stand for extended periods on a loading dock that is not climate-controlled and may be slippery, • Reach (including above your head), bend, climb, push, pull, twist, squat and kneel as necessary About XPO XPO is a top ten global provider of transportation services, with a highly integrated network of people, technology and physical assets. At XPO, we look for employees who like a challenge and can communicate effectively in all situations. We want to leverage your skills and years of experience to drive positive results while ensuring a bright future for yourself and XPO. If you’re looking for a growth opportunity, join us at XPO. We are proud to be an Equal Opportunity employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran or other protected status. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are not an exhaustive list of all required responsibilities, duties and skills for this job classification. Review XPO's candidate privacy statement ___. PandoLogic. Category:Transportation, Keywords:Forklift Operator, Location:Edison, NJ-08899

Tutor Map are offering new tuition and teaching positions in Edison. We are seeking Math tutors and teachers in Edison. You can register for free, we take zero commission. Earn between $40-$80 per hour. Tutor Map is the largest online tutoring company in the UK and are expanding to the US. We have been running for over 18 years and are market leaders in helping families locate tutors. We are seeking individuals who are self-motivated, creative & organised. You can teach online from your home or travel to the student. You are able to set your own rate of pay for teaching students and offering private tutoring.

Job Description Job Description Date 4/2023 Location 1300 Airport Road, North Brunswick NJ Title Associate, Manufacturing Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Manufacturing Associate is responsible for the operation and set up of one (1) machine under the guidance of a seasoned operator. The position includes assisting with the setup, operation, cleaning, moving supplies and finish products and preventative maintenance of all related equipment. The Associate is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Areas of Responsibility • Ensure full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed to ensure product specifications and tolerances are met in compliance with company standards and regulatory requirements., • Ensure that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Perform all material handling of products and components., • Correct document errors as needed on batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Work extended hours and occasional weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent., • No prior experience required., • Operates one (1) machine under guidance of a seasoned operator. Certifications, Licenses, Credentials: • Able to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Mechanically inclined to understand inner workings of equipment., • Able to lift up to 50 lbs.; occasionally lift and move up to 75 lbs., • Stand and walk on the production floor for a minimum of 6 hours per shift., • Use hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. 1st shift: 7:00 AM - 3:30 PM Pay Rate: $17.00 2nd shift: 3:15 PM - 11:45 PM Pay Rate: $18.00 3rd shift: 11:00 PM - 7:30 AM Pay Rate: $19.00

Job Description Full service metal fabrication shop is seeking experienced individual who possesses the knowledge, skills and ability to layout, fabricate and assemble various metal products per drawings or verbal instructions. Knowledge of MIG, TIG and stick welding, shears, press brakes, saws, milling machines, and plate rollers required. Driver's license required. Heavy math skills necessary. Occasional overtime. Compensation commensurate with experience.

Job DescriptionDescription: Looking for motivated and reliable production candidates to add to our Production Team. You will have the opportunity to be part of a fast-paced and growing company. We are looking for candidates with a strong work ethic, positive attitude, and a willingness to learn. You will be responsible for direct labor tasks related to the assembly of our steel products. Execute daily work instructions received from Supervisor in a timely manner. • Work effectively to meet or exceed productivity goals while maintaining high quality standards., • Operate manual material handling equipment., • Lift and carry merchandise as needed., • Inspect merchandise upon delivery to identify any damage., • Load and unload merchandise. 4pm - 12:30am Monday through Friday Second Shift differential of $1.00/hour Requirements: • HS Diploma or equivalent, • Prior experience working in a production/warehouse environment a plus, • Motivated and able to follow instructions., • Able and willing to work outside and in all weather conditions., • Excellent integrity, good moral, strong character and takes initiative, • Excellent interpersonal skills to interact with people from all levels and departments., • Ability to communicate effectively in English. Bi-lingual, desired., • basic math background and aptitude., • High attention to detail., • Proof of US citizenship or legal resident alien status by completing Federal Form I-9 in compliance with the Immigration Reform and Control Act of 1986.

Job DescriptionCrew Chiefs and Restoration TechniciansFULL TIME PISCATAWAY SERVPRO of Piscataway Restoration Technician Do you love helping people through difficult situations? Then, dont miss your chance to join our franchise as a new Restoration technician. As a new Restoration technician at SERVPRO of Piscataway , you will be a part of a team of quality people who focus on excellent service, fairness, and mutual respect. The Restoration technician performs production processes to fulfill the service needs of individual restoration projects and maintains the professional appearance of SERVPRO equipment, as well as an assigned service vehicle. By providing quality, consistent, efficient work, the Restoration technician represents the best in the cleanup and restoration industry. As a valued SERVPRO franchise employee, you will receive a competitive pay rate, with opportunity to learn and grow. Training and development program available, which can include industry certifications. In this position, you will be making a difference each and every day. We have a sincere drive toward the goal of helping make fire and water damage Like it never even happened! Primary Responsibilities • Perform production processes, demolition and other labor intensive tasks, • Inventory and load the work vehicle with equipment, products, and supplies needed for each project. Maintain a clean and organized vehicle and clean equipment appearance., • Prepare rooms/areas for work activities. Set up staging area and equipment for each project., • Adhere to safety and risk management guidelines at all times, • Communicate with restoration supervisor and other technicians to maintain efficient production processes, • Effective oral communication with basic math and computer skills, • Experience in cleaning/restoration preferred, • High school diploma/GED, • IICRC certifications preferred but not required, • Valid drivers license, • Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance, • Ability to climb ladders, work at ceiling heights, work in tight spaces (e.g., crawl spaces, attics), • Ability to sit/stand/walk for prolonged periods of time, • Ability to repetitively push/pull/lift/carry objects, • Ability to work with/around cleaning products/chemicals, • Ability to travel locally and out of state when necessaryBenefits, • Medical and dental benefits, • Paid time off, • Overtime available at times, • Paid training and development program SERVPRO of Piscataway is an Equal Opportunity Employer and does not discriminate on the basis of gender, disability, or veteran status. All employees of a SERVPRO Franchise are hired by, employed by, and under the sole supervision and control of an independently owned and operated Servpro Franchise. Servpro Franchise employees are not employed by, jointly employed by, agents of or under the supervision or control of Servpro Industries, LLC or Servpro Franchisor, LLC (the Franchisor), in any manner whatsoever. All Sample Forms provided by Servpro Industries to Servpro Franchises should be reviewed and approved by the Franchises attorney for compliance with Federal, State and Local laws. All Sample Forms are provided for informational purposes and Servpro Franchises may choose whether or not to use them. Each SERVPRO Franchise is Independently Owned and Operated. Revised 02/2021 Compensation: $18.00 - $25.00 per hour Picture yourself here fulfilling your potential. At SERVPRO, you can make a positive difference in peoples lives each and every day! Were seeking self-motivated, proactive, responsible, and service-oriented teammates to join us in our mission of helping customers in their greatest moments of need by repairing and restoring homes and businesses with an industry-leading level of service. With nearly 2,000 franchises all over the country, finding exciting and rewarding SERVPRO career opportunities near you is easy! We look forward to hearing from you.

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Maintenance Mechanic - MFG Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Maintenance Mechanic is responsible for maintenance, repair and troubleshooting, Processing equipment such as conveyors, blowers, sifters, burners, grinders, conventional & high-speed encapsulation equipment, vacuum & hydraulic pumps, air compressors, fluid bed dryers, coating machines, granulators, tablet compression machines, etc. Areas of Responsibility Level 1 – Mechanic, Maintenance (MFG) Mechanic supports routine maintenance, equipment cleaning, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to manufacturing maintenance, this role focuses on learning and executing tasks safely and accurately. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup, repair, troubleshooting, and maintenance of manufacturing equipment. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Perform disassembly, cleaning, and setup of basic production equipment., • Assist senior technicians in scheduled maintenance tasks., • Replace small parts (belts, hoses, filters) with direction., • Learn and follow cGMP and safety procedures., • Complete daily logs, maintenance checklists, and safety forms., • Participate in basic troubleshooting with guidance., • Respond to facility and equipment issues under supervision., • Operate forklifts and lifts (certification preferred). Level 2 – Mechanic, Maintenance (MFG) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, and lead to smaller repairs. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct intermediate-level repairs on packaging and processing equipment., • Troubleshoot mechanical, pneumatic, and electrical systems., • Use diagnostic tools (calipers, micrometers, multimeters, etc.)., • Coordinate with vendors to address equipment issues., • Maintain spare parts inventory and request supplies., • Operate and maintain boilers, HVAC, pumps, and compressors., • Record maintenance activities accurately in logbooks and systems., • Train and mentor Level 1 Technicians., • Support emergency calls and on-call rotations. Level 3 – Mechanic, Maintenance (MFG) Mechanic are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Employees operate with minimal to no supervision. They are trusted to independently plan, diagnose, repair, and maintain complex manufacturing equipment. They make high‑level judgments, lead projects, and serve as technical experts and advisors. Employees work closely with the engineering team to identify mechiancal issues, processing issues and propose process improvement measures mechiancally to improve productivity and effeciency of equipment. Have a deep understanding of the process and equipment being used. Key Responsibilities: • Lead troubleshooting and repairs of high-speed and complex machinery (e.g., encapsulators, fluid bed dryers, tablet presses)., • Diagnose and resolve advanced mechanical/electrical problems., • Manage and execute preventative maintenance programs., • Read and interpret advanced schematics, blueprints, and manuals., • Serve as a technical liaison between departments and vendors., • Lead regulatory inspections (OSHA, EPA, etc.) support and documentation., • Mentor and train Levels 1 and 2 staff., • Plan and coordinate plant shutdowns and major repirs. Education & Qualification: Level 1 – Mechanic, Maintenance (MFG) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Job Description Date 09/25 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Building Maintenance Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Building Maintenance Mechanic is responsible for the upkeep, repair, and maintenance of building systems, structures and utilities supporting operations in the facility. . This includes HVAC, plumbing, electrical systems, carpentry, painting, and general facility maintenance along with supporting equipment/utilities such as Air compressors, boilers, dust collectors etc.. The role ensures a safe, functional, and compliant environment for building occupants, adhering to Good Manufacturing Practices (cGMPs) and other industry standards. Areas of Responsibility Level 1 – Mechanic, Building Maintenance Employee will assist in the upkeep and repair of building systems under close supervision. This role is ideal for individuals beginning their career in facilities maintenance within a regulated manufacturing and warehouse environment.. Employees at this level operate under close supervision. They apply foundational mechanical and electrical knowledge to assist in setup and repairs. Independent judgment is limited; more complex tasks are escalated to higher levels. Key Responsibilities: • Assist in routine inspections and basic maintenance tasks on HVAC, plumbing, and structural systems. under supervision., • Perform minor repairs on building systems (e.g., replace light bulbs, unclog drains)., • Assist in preventive maintenance activities., • Maintain cleanliness and organization of work areas., • Report issues and escalate complex problems to senior staff. Level 2 – Mechanic, Building Maintenance Employee will independently manage routine and moderate maintenance tasks, ensuring the functionality and compliance of building systems. This role is suitable for individuals with a solid foundation in facilities maintenance and a proactive approach to problem-solving. Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply skills to set up, repair, and maintain facility/building and associated utilities. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Conduct inspections and perform preventive maintenance on HVAC, plumbing, electrical, and structural systems., • Diagnose and repair minor to moderate issues in building systems., • Coordinate with vendors for specialized repairs and services., • Maintain accurate records of maintenance activities and inventory., • Assist in training and mentoring Level 1 technicians. Level 3 – Mechanic, Building Maintenance Employees will oversee complex maintenance projects, lead preventive maintenance initiatives, and ensure compliance with all safety and regulatory standards. This role is designed for individuals with extensive experience and leadership capabilities in facilities maintenance Employee will operates independently with full responsibility for maintenance operations, making strategic decisions to improve facility performance. Key Responsibilities: • Lead and oversee complex maintenance projects and repairs., • Develop and implement preventive maintenance schedules., • Ensure compliance with all safety and regulatory standards., • Manage relationships with contractors and service providers., • Prepare and manage maintenance budgets and reports., • Supervise and mentor Level 1 and Level 2 technicians. Requirements Education & Qualification: Level 1 – Mechanic, Building Maintenance • High school diploma or GED equivalent., • Basic knowledge of building systems., • Ability to use hand tools and power equipment safely., • Strong attention to detail and willingness to learn., • High school diploma or GED equivalent; vocational training or certification in building maintenance preferred., • 3–5 years of experience in building maintenance or a related field., • Proficiency in using diagnostic tools and equipment., • Strong problem-solving skills and ability to work independently., • High school diploma or GED equivalent; advanced certifications or associate degree in building maintenance or facilities management preferred., • 5+ years of experience in building maintenance, with at least 2 years in a supervisory role., • In-depth knowledge of building systems and maintenance procedures., • Strong leadership, organizational, and communication skills., • Ability to manage multiple projects simultaneously., • License or certifications in electronics, pneumatics and/or hydraulics preferred., • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneel on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. May occasionally work on the outside of the building, on the grounds, in parking areas, or on the roof during all seasons. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job Description Job Summary We are looking for a high-performing representative to join our landscaping sales team. As a Customer Relations employee, you will grow our customer base by identifying potential customers and meeting with them, keeping in touch with existing customers, and making sure that everyone has a positive experience. You will meet with customers regularly and assess their properties and propose needed landscaping services. Responsibilities • Meet with customers regularly., • Create a professional environment that builds rapport and puts customers at ease, • Answer customer questions about landscaping services, • Use Microsoft 365, adobe, and RealGreen systems., • Use strong negotiation skills to complete the sales process while maintaining a high level of customer satisfactionQualifications, • High school diploma or GED equivalent is required., • Valid state-issued drivers license and clean driving record are required, • Prior landscaping experience is required., • Excellent communication and negotiation skills, • Ability to manage time and serve customers with little supervision., • Ability to use math skills to measure properties and materials., • Knowledge of plants and materials

Job Description Reach Truck and Forklift Experience Needed 10:00 am - 6:30 pm Monday - Friday (No weekends) • Responsible for the preparation and shipping of outbound parcels and receipt of inbound product., • Maintain functional expertise by reviewing and retaining task related ERP system transactions., • Contribute to team goals by accomplishing tasks while meeting key performance targets., • Maintain a safe and clean work environment by keeping pallet areas, racks, shelves, and workstations neat and orderly., • Prepare Hazmat paperwork for related shipments (UPS / FEDEX / LTL)., • Prepare Bills of Lading., • Maintain inventory control by utilizing appropriate equipment and performing cycle counts., • Maintain quality service by following organizational standards., • Communicate clearly both orally and in writing to internal and external customers as needed., • Take on a variety of roles within a given work day., • Other duties as needed or assigned. Requirements: • High School Diploma or GED, preferred., • PC literate; proficient in Microsoft Office, Excel, and Outlook., • Excellent attention to detail., • Good math skills., • Power equipment skills (forklift, pallet jack)., • Effective oral communication skills., • Ability to work in a team environment and maintain self- responsibility., • Ability to stay committed, maintain integrity, and practice innovation., • Ability to maintain a high sense of urgency while maintaining a clean and safe environment., • Ability to communicate clearly both orally and in writing to internal and external customers as needed., • Ability to take on a variety of roles within a given work day. Working Conditions: • Erratic temperature control (hot in summer, cold in winter)., • Workshop environment is subject to hear, cold, noise, dust and other particles., • Operation of large equipment and machinery (i.e. production machines and forklifts) Safety Equipment Required., • Must observe and abide by any and all safety regulations as required by Hilti and Occupational Safety and Health Administration (OSHA)., • Proper labeling and handling of hazardous materials per Hilti and OSHA policy., • Must wear steel toe boots, safety glasses, safety vest, and other safety equipment as required when working in the warehouse and/or operating machinery. Physical Requirements: • Regular heavy lifting of 50 + lbs., • Occasional heavy lifting up to 75 lbs. required., • Warehouse material handling equipment and truck loading / unloading., • Must be able to tolerate a variable climate, prolonged standing, repetitive bending and reaching, and climbing up and down ladders. EOE Company DescriptionIf you’re new to the industry, you might not have heard of us. We provide leading-edge tools, technologies, software and services for the global construction sector. We have a proud heritage, built over 75 years, and a worldwide reputation for pioneering products and exceptional service. With more than 30,000 people in more than 120 Locations, which we’re looking to expand, we’re a great place for you to show us your worth, step up to new challenges and grow your career.If you’re new to the industry, you might not have heard of us. We provide leading-edge tools, technologies, software and services for the global construction sector. We have a proud heritage, built over 75 years, and a worldwide reputation for pioneering products and exceptional service. With more than 30,000 people in more than 120 Locations, which we’re looking to expand, we’re a great place for you to show us your worth, step up to new challenges and grow your career.

Job DescriptionAs a member of the Cookie Crew at our New Brunswick, NJ store located at 176 Easton Ave New Brunswick, NJ 08901 you are the ultimate Insomniac. Not only are you the point person at the front of the store for interacting with our customers, but you also get to bake all of our awesome Warm and Delicious cookies as well! Check out some of our content vids below to learn more:Who We Are!Insomnia Cookies TimelineCore Values SOME OF OUR SWEET COOKIE CREW PERKS:· Pay Rate: $15.50/hr - Flexible part-time work schedules· Pay-on-Demand (no longer do you have to wait until the end of the week. Get paid daily for your total shift earnings from the day before!) · Paid vacation and sick time off· Pet insurance for your furry loved ones· Interactive training & mentorship· Job stability with a rapidly growing and reputable company· Achievable growth/promotion opportunities· You get to work in a fun, exciting team environment· Employee discount and FREE COOKIES with every shift! WHAT ELSE WILL I DO AS A MEMBER OF THE COOKIE CREW?· Promptly greet guests entering the store and take their orders according to procedure· Help customers understand menu items, answer clarifying questions, and repeat orders for accuracy· Give each customer a warm experience with a smile in person & over the phone· Bake our delicious cookies to perfection & a scoop of ice cream· Ensure fast, warm, and correct delivery orders are packaged and sent out· Handle cash and payments accurately and have no shortages or overages· Cleaning, sanitizing, and maintaining the bakery DESIRED SKILLS & EXPERIENCE:· At least 6 months of experience in a customer service focused role - preferred· Personable, genuine, outgoing demeanor· Customer service focused and a willingness to exceed guest expectations · Great communication, organizational and math skills· Must be able to lift up to 40 lb boxes of product· Must be 18 years or older to be employed· Must be able to work nights, weekends and holidays· Legally eligible to work in the United StatesAbout us:Insomnia Cookies was founded in a college dorm room by then-student, Seth Berkowitz. Fast forward 20 years and so... many....cookies... later, our innovative bakery + delivery concept has become a cult brand known for its rabid following of cookie lovers who crave Insomnia’s warm, delicious delivery all day and late into the night. With an expanding footprint of over 300 stores globally, an experiential, “sweet-easy” concept as the brand’s flagship in Philadelphia, Pa. (where Insomnia Cookies is headquartered), and a rapidly-growing nationwide shipping and gifting portfolio... Insomnia Cookies is revolutionizing the cookie game by truly "Imagining What’s Possible"!

Job DescriptionEssential Duties and Responsibilities: • Offers friendly service to all guests, • Takes customer orders, maintains fast, accurate service, and positive guest relations, • Operates grill and sandwich maker in an efficient and safe manner, • Ensures company standards on equipment, facility, and grounds are maintained, • Ensures food quality and 100% customer satisfaction, • Maintains the restaurant with regards to cleanliness, neatness and customer accessibility, • Uses the company cash register accurately and maintains proper control of company assets, • Works as a team member to support other restaurant employees in their duties, • Receives payments by cash, credit or debit cards, and gift cards, • Issues receipts, refunds, or change due, • Assists customers by providing menu information and resolving their complaints or concerns, • Readily identifies prices of menu items and calculate bill using POS, • Enthusiastically greets customers entering restaurant, • Answers customers’ questions and provides information of the store’s policies and relevant procedures regarding the preparation or cooking process, • Maintains a clean and orderly register area., • Mixes milkshakes and other beverages as necessary Qualifications - Knowledge, Skills and Abilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience: 1 year of experience in either a food service or retail environment is preferred. Experience in providing customer service and a desire to grow in the food industry is strongly preferred. You must have a very hands on work style and be actively involved in all daily functions of the store. • Certifications: A NYC Food Handlers License is not required to be considered for this position but is preferred., • Language Ability: Good communication and interpersonal skills are required. The ability to read and comprehend simple instructions, short correspondences, and memos is necessary. The position also requires the ability to write simple correspondences and the ability to effectively communicate with co-workers and customers. This position requires that you are able to convey information effectively and accurately, vocalize clearly and loudly enough to be heard in a noisy environment, and proficiently speak, read, and write the English language., • Math Ability: The position requires knowledge of simple math and its application to receive and disburse cash. This includes the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Reasoning Ability: The position requires the ability to solve practical problems and deal with a variety of situations and people. You will need the ability to apply general rules of the job to successfully solve problems that may occur without involving the manager. Strong analytical and decision-making skills are needed., • Computer Skills: Must be able to operate cash register., • Physical Demands: The position’s physical demands require work in a restaurant/kitchen environment with moderate to loud noise levels, varying temperature conditions and possible direct exposure to hazardous substances, such as hot oil. While performing the duties of the job, the employee is regularly required to sit, stand, travel and react quickly to deadlines, sometimes with little notice. The employee is often required to stand for long periods; walk, bend, kneel, and reach with hands to retrieve boxes or food containers typically weighing 50 pounds or less, without restrictions. May be required to use a stepladder. Finger dexterity is required for use of cash register. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to travel as needed., • Hospitality: Actively look for ways to help customers, provide as much information as requested. Infer possible customer needs, as it may be their first experience at the restaurant. Knowledge of, quality standards of service, store policies regarding customer interaction, assessment of customer needs, and customer satisfaction are all necessary., • Active Listening: Give full attention to what customers are saying, be able to listen to and process the customer orders without losing track., • Social Perceptiveness: Be aware of customers’ reactions, both verbal and nonverbal, and understand why they are reacting this way. Understand the boundaries of appropriateness., • Integrity: Must be honest and possess an immense code of ethics as the cashier is the primary receiver of the cash flow. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor, policy and company management.

Job Description Position is In-Person in Edison, NJ - 5 Days (Monday/Friday) Industry: Consumer Products, Home Textiles General Purpose To manage all aspects of production from order creation and management through to order shipment. This individual is responsible for entering data from various source documents into our systems for processing and data management. They are responsible for keeping the product specification and costing databases accurate. Additionally, they are responsible for organizing and managing purchase orders and ticket ordering, as well as maintaining customer portals. Basic math skills are required. Responsibilities • Manage the order creation process from start to finish by accurately preparing, compiling, and processing data into prescribed databases, files, and forms., • Verify and correct data where necessary; check completed work for accuracy to ensure data integrity and comply with company security policies., • Maintain, manage, and execute a detailed logbook of activities and tasks related to all phases of the order cycle. Detailed follow up both internally and externally is critical to candidate’s success., • Manage packaging approvals in a timely manner. Check and approve all layouts and pre-production samples. Ensure color and quality of packaging matches our standards and is approved by licensor where necessary., • Ensure sample orders are completed accurately in line with needs, specifically licensor, customer, production, and showroom samples., • Check purchase orders are received accurately. Ensure tickets are ordered and received in line with the production schedule., • Manage customer portals to ensure all setups are completed on time and accurately. Ensure all images and/or product samples are requested and uploaded as needed., • Maintain product & packaging specifications and costs in our database by effectively communicating & partnering with our PD team and overseas office/factories., • Maintain office, organization, and sample management., • Effective communication and written skills a must., • Perform other assigned duties as requested.

Job Description Employment Type: Intern Division: Project Management Department: Project Management Salary Range: $23 - $28/hour The Project Management Intern supports Project Engineers, Project Managers, and Superintendents in coordinating and executing construction projects. This role offers hands-on experience in project documentation, scheduling, communication, and field support within a dynamic construction environment. Responsibilities / Essential Functions • Assist and support Project Engineers, Project Managers, and Superintendents on assigned projects., • Demonstrate flexibility and adaptability as a team player with strong communication and organizational skills., • Process submittals and gather/distribute information; maintain high-quality project documentation and ensure processes stay within budget and on schedule., • Attend project meetings and accurately record meeting minutes., • Assist with tracking and inspecting material deliveries., • Perform other tasks as assigned by the project team. Key Skills • Strong written and verbal communication skills., • Broad understanding of the construction industry., • Strong initiative and problem-solving abilities., • Team-oriented with strong dependability., • Ability to maintain discretion and confidentiality at all times., • Strong organizational and time management skills., • Ability to understand and follow directions effectively., • Outstanding attention to detail., • Ability to manage time effectively and handle multiple responsibilities while meeting strict deadlines. Required Experience • Currently pursuing a Bachelor’s Degree in a relevant field., • Demonstrated interest in construction management and the construction industry., • Proficiency in Microsoft Office and general computer efficiency., • Basic math and accounting skills.

Job Description New Castle Building Products (NCBP) is a full-service distributor based in White Plains, NY. NCBP operates with seven core values: Caring, Urgency, Teamwork, Honesty, Accountability, Flexibility and Passion. All our 20+ locations from Massachusetts to Baltimore operate with these core values as their driving force. We look for team members who will display and share these values with fellow employees and customers. Our location based in Piscataway, NJ is seeking an Inside Sales Representative In this role, candidates should have an outgoing personality, good communication skills and like to work with the general public. However, we are willing to train the right candidate. Main Job Tasks & Responsibilities: • Preparing quotes for potential customers, • Preparing computer generated work orders for customers, • Handle and process customer returns, • Work closely with Branch Manager, • Develop and maintain a working technical knowledge of products sold, • Coordinate customer delivery requirements with the dispatcher, • Occasional purchasing of inventory, • Maintain material stock in showroom, • Must have a can do, customer service first attitude, • Basic math skills, • A good memory to be able retain a working technical knowledge on vast amounts of building materials., • Prior experience with sheet metal fabrication or metal roofing is a plus, • Able to work in a fast-paced environment, • Commitment to the Company’s mission and its core values We offer a full benefits package including: • Unparalleled work environment, • Competitive pay, • Paid vacation and holidays, • Benefits: Medical/Dental/Vision/Life Insurance, • 401(k) with discretionary employer match NxpNE8lWyV

Job DescriptionAssist customers in selecting appropriate products, troubleshooting customer concerns, caring for store animals, merchandising and store maintenance It is the primary point of contact for customers Responsibilities:* Assisting customers with purchasing decisions* Help customers troubleshoot problems with their pets* Assist customers with product returns and help resolve customer issues* Stock and merchandise incoming products* Assist with animal care for store animals and adoption program animals* Performing daily store cleaning procedures* Assist Store Associates in the performance of their duties* Operate cash register and check out customers* Prepare customer orders for delivery when necessary* Perform store opening and closing procedures including cash counts and checklist items Qualifications:* 2 years retail experience preferred* Must have excellent communication skills* Strong customer service orientation* Excellent problem solving skills* Must be able to work independently and be well organized* Computer literate with good basic math skills* Must be able to lift up to 50 pounds

MAINTENANCE MECHANIC (2ND SHIFT) NEW BRUNSWICK, NJ (ONSITE) JOB ID: 23583 Our client is a multinational pharmaceutical company that manufactures and sells pharmaceutical formulations and active pharmaceutical ingredients in more than 100 countries across the globe. They are looking for a Maintenance Mechanic who will support pharmaceutical manufacturing plant/equipment/utilities maintaining compliance with all state and federal guidelines with emphasis on current Good Manufacturing Practices (cGMPs) requirements. Federal and State regulatory requirements. WHAT YOU GET TO DO • Perform Preventive Maintenance and breakdown maintenance consistent with cGMP engineering maintenance requirements., • Perform non-routine tasks as necessary., • Troubleshoot issues and problems for optimal running efficiency by solving simple to complex problems related to equipment or process., • Maintain documents related to PM, breakdown maintenance and usage logbook., • Follow all company policies related to job safety in addition to all regulatory guidelines., • Perform and assist in improvements/maintenance to all site operations., • Other duties as assigned. WHAT YOU BRING • Minimum of High School/Trade School/Vocational School Diploma, GED, or equivalent, • Minimum 1 - 2 years of Mechanical Maintenance experience, in industrial, manufacturing or pharmaceutical manufacturing experience., • Black Seal Boiler License or HVAC Certification are preferred, • Ability to identify replacement parts from manuals and other resources, • Basic Math and Computer Skills including MS Office and some experience with SA, • Operational understanding and troubleshooting process of manufacturing equipment such as Blenders, Sifters, Mills, Printing Machines, Dust Collectors, Tablet Dedusters, and Packaging Equipment, • Good Interpersonal skills, • Basic understanding of cGMP and OSHA Regulations, • The requirement for English language proficiency for this job role is Basic – A2 (comparable to Global CEFR Basic A2) level based on the Common European Framework of Reference for Languages (CEFR). Must be able to work for a US based company without requiring visa sponsorship. COMPENSATION AND BENEFITS • Pay rate range of $33.00 to $38.50 an hour based on experience and qualifications, as well as geographical market and business considerations. Outside of offering excellent medical, dental, and vision benefits, we also offer the following: • Paid time off and holidays, • 401k & company match, • Flexible Health Care, Medical Plus Plan and HSA, • Wellness Programs: Employee Assistance Program, Passport Unlimited, 24-hr NurseLine, Preventative Care & Health Screenings and Quit for Life, • Parental Leave, and Long Term Care Insurance, • Adoption Assistance, • Disability Coverage: Short & Long Term Coverage, • Life and Accident Coverage MORE ABOUT WIMMER SOLUTIONS Wimmer Solutions is proud to be an equal-opportunity employer. All applicants will be considered for employment regardless of race, color, religion or belief, age, gender identity, sexual orientation, national origin, parental status, veteran, or disability status. Wimmer Solutions is committed to achieving a diverse employee network through all aspects of the hiring process and we welcome all applicants. If you are passionate about what you do and want to join a diverse team dedicated to diversity, equity, and inclusion in the workplace, we would love to hear from you. Get the job you have always wanted. You will join a broad team of professionals who are energized about their careers as well as their community. For more career opportunities or to refer a friend, please visit and talk to a recruiter today.

Job DescriptionSalary: Are you a passionate educator eager to shape the future of education? Have you been on the brink of leaving traditional teaching? Learnlife is seeking dynamic Primary Years Teachers to lead and revolutionize learning experiences for 6- to 9-year-olds in the Garraf region (St. Pere de Ribes). Our movement At Learnlife, we are committed to pioneering a paradigm shift in education. Our mission is to empower a love of learning by creating learning models tailored to the needs of today's and future generations. Get a glimpse of how we learn [here]. Weve built 3 Hubs that host 250 school-aged learners in the greater Barcelona area. As a Learning Guide, you will lead our primary program at our new location in St. Pere de Ribes, fostering a love for learning and equipping students with essential skills for success. Additionally, you will play a key role in shaping a positive learning culture in our youngest location. Start date: Full-time from the 19th of August 2025 Hours: 8:30 AM 4:30 PM, in person, in St. Pere de Ribes (Garraf, Barcelona area) Your responsibilities Lead Program Design • Design and lead a comprehensive learning program for Adventurers and Discoverers (6-9 year olds), integrating literacy, numeracy, and transdisciplinary learning experiences., • Work within a cross-functional, agile team to develop and refine learning experiences., • Design and develop engaging learning environments tailored to the needs of primary and middle years learners., • Assist in the visioning and design of the brand new primary years space at the Village Hub. Your experience Past Expertise & Instructional Design • Minimum 3 years of experience working with 6- to 9-year-olds in international or local schools (PYP), montessori, or project-based learning (PBL) environments., • Experience in multiage instructional design, particularly around early years (ages 6-10) literacy and math.., • Experience with multidisciplinary learning experience design., • Proven ability to design engaging learning experiences and effectively manage groups of learners. Teaching Certification • C2-level English proficiency is required., • You act as a coach, mentor, passion-pusher, facilitator, and curator, meeting learners where they are., • A self-starter who is highly resourceful, self-aware, and adaptable., • An innovative mindset, drawing from a wide range of learning methodologies to creatively meet the needs of diverse learners., • A creative individual who brings their own passions into learning experiences. Join Us! Help us shape the future of education and empower the next generation of lifelong learners in St. Pere de Ribes. How to Apply If you're ready for your next professional adventure, please submit: Your CV and/or portfolio A brief letter (max one page) outlining your vision for how education should change A short 1-minute video introducing yourself, your interest in the position, and your passion as an educator. Please upload your video as a URL. We look forward to your application! At Learnlife, our culture of creativity and innovation thrives on a diverse mix of minds, backgrounds, and experiences. We are committed to building an inclusive community where differences are valued and celebrated. Everyonefamilies, learners, core team members, partners, and investorsshould feel safe to be their authentic selves.

Job DescriptionBenefits/Perks • Competitive Compensations, • Career Advancement Opportunities You are passionate about learning and helping students reach their potential. With strong creative and problem-solving skills, you love connecting with individual students and creating an engaging classroom environment. Responsibilities • Create and follow a comprehensive curriculum, • Teach beginning reading and math skills, • Assist children with developing social and emotional skills, • Use a range of instructional methods and learning techniques, • Communicate with parents and other school personnel, • Assess student's skills and performance to ensure they are meeting developmental milestonesQualifications, • Bachelors degree and state teaching certification, • Strong understanding of child development principles and best practices in education and classroom management, • Excellent verbal and written communication skills, • Knowledge of classroom health, safety, and sanitation guidelines and ability to closely adhere to the guidelines, • Problem-solving and mediation skills

Job Description Ignite Your Career: Sales Estimator Are you a precision-focused construction pro with a keen eye for detail and the persuasive chops of a top-tier salesperson? We're not just looking for an estimator; we're seeking a dynamic deal-closer—a Sales Estimator to be the architect of our profitable growth. This is a high-impact, professional role where your technical expertise in complex estimating meets your ability to forge lasting customer relationships and secure high-value sales. If you're ready to use your deep estimating experience to master project specifications, drive technical sales, and directly impact our bottom line, join our team! Your Mission: Estimating & Sales Execution You will serve as the crucial link between project scope and profitable execution, utilizing a powerful combination of technical mastery and commercial savvy. 1. Strategic Project Analysis & Bidding: • Decipher the Blueprint: Conduct an exhaustive study, evaluation, and understanding of complex job plans, construction specifications, and technical scope documents., • The Precision Take-Off: Lead the charge in preparing meticulous take-offs and estimates by researching all contracts, job specifications, and schematic drawings. Your estimates will be the foundation for project success, accounting for material, labor, logistics, and ensuring alignment with company profit policies., • Secure the Win: Prepare the final, compelling quote and deploy your sales acumen to aggressively secure the sale, transforming estimates into awarded contracts., • Public Sector Scout: Proactively research and identify public bid opportunities for lucrative government and municipal projects., • Doubt Destroyer: Submit any necessary Requests for Information (RFIs) to the job owner to ensure absolute clarity and a risk-free quote. 2. Product & Process Command: • Technical Guru: Maintain a deep, up-to-date knowledge of the company's products, services, and technical capabilities, including materials, specifications, functionality, and assembly requirements., • Estimation Integrity: Rigorously document all estimating logic, technical details, and analysis using MS Excel or industry-standard estimating software., • Continuous Insight: Monitor overall sales and product trends to quantify the value and market position of various product lines. 3. Sales, Customer Focus & Account Leadership: • Relationship Architect: Establish personal rapport with direct decision-makers and their technical staff within customer, contractor, and government agencies., • High-Touch Service: Serve as the primary point of contact, expertly responding to customer inquiries, issues, and complaints to ensure complete, raving satisfaction. Proactively manage product returns, replacements, and project scope changes., • Key Account Steward: Manage key account relationships with surgical precision to maximize retention of existing business and aggressively pursue new business opportunities., • Bid Agility: Quickly revise bid documents to accurately reflect any changes in project scope, materials, or technical requirements. 4. Interdepartmental Synergy: • Procurement Partner: Collaborate closely with the Purchasing team for the most efficient and cost-effective procurement of required materials, considering vendor performance, competitive pricing, and critical product certifications., • Logistics & Finance Coordinator: Seamlessly coordinate with internal Warehouse and Accounting departments to ensure accurate inventory levels, timely delivery schedules, and smooth payment processing. What You Bring: The Winning Profile • Elite Construction Estimating Experience: At least four to six years of successful, hands-on experience in construction, manufacturing, or a related technical estimating position with direct exposure to complex projects., • Degree of Distinction: Bachelor’s Degree in Construction Management, Engineering, Manufacturing, or a related technical field is highly preferred., • Sales & Service Power: A minimum of two years of successful experience in sales and customer service within a commercial B2B or B2G sales model., • Estimating & Pricing Mastery: Expert, demonstrable knowledge of construction estimation methodologies, quotation protocol, and advanced pricing strategies., • Blueprint Proficiency: Exceptional ability to read, comprehend, and interpret detailed specifications and trade drawings to fully understand the complete spectrum of job requirements., • Independent Drive: Proven capacity to develop and optimize personal procedures and processes for efficiently managing and completing high-volume work assignments., • Technical Toolkit: Advanced proficiency with MS Office applications (especially Excel for complex calculations) and strong familiarity with CRM software. Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Revitalized Company Overview: Intelligent Traffic Supply Products, LLC\r\n\r\n\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\n* Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\n* Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\n* Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job DescriptionDescription: Job Summary: Oversees the activities of plant and facility maintenance for a 55,000 square foot building and is responsible for managing the installation and maintenance of equipment, machinery and buildings of the company. Also responsible for planning, budgeting and scheduling facility modifications - including estimates on equipment, labor materials and other related costs. Essential Functions: • Ensures production equipment operates safely, efficiently, and predictably by supervising and performing scheduled equipment maintenance., • Supervises the daily, weekly and monthly preventative/predictive maintenance activities., • Schedules and leads the daily activity of a maintenance team of 5-15 associates and develops effective and relevant metrics for direct reports., • Selects and develops talent to match the maintenance needs of plant operations., • Leads safety initiatives for the maintenance department including:, • Conducts safety compliance inspections of the production and shop equipment to eliminate hazards, • Actively participates in the site safety committee, • Plans and enforces safe work practices through effective PPE, lockout/tagout, and other behaviors, • Ensures compliance with all OSHA, HLAC and environmental regulations and other local, state and federal government regulations., • Develops and executes a maintenance operating plan that meets budgeted expenses., • Manages spare parts and supplies procurement and inventory and maintains effective vendor relationships., • Ensures that Company facilities, including buildings and grounds, are maintained to Company standards., • Provides technical assistance to Production Managers and associates including training on equipment operation, equipment start-up, and operator preventative maintenance., • Develops effective troubleshooting and repair/adjustment to production and maintenance equipment., • Communicates effectively with all levels of the organization and provides periodic reporting on results and metrics., • Selects and provides direction to all outside contractors., • Seeks new technologies and automation opportunities in lowering the overall cost of manufacturing., • Must have well developed communication and basic math skills, organizational, analytical, and decision-making skills, efficient multi tasking abilities, ability to supervise multiple workers in an often fast-paced environment, organizational skills, and able to foster a positive team working environment., • The ability to stand, sit and/or walk repeatedly throughout most of the workday., • When in the plant, subject to the outside environment with possible exposure to extreme temperatures (heat, cold, humidity, etc.)., • Position is occasionally exposed to fumes, odors, dust, mists, airborne particles, chemicals, heights, cramped quarters, oil, grease and dirt., • Normal lifting of up to 50 pounds is possible., • Mobility is necessary in order to perform assigned functions., • Noise level is moderate to heavy as the work area is a production environment., • Position requires the ability to occasionally work different shifts to monitor plant performance., • Bachelor’s Degree or equivalent work experience along with 5+ years of industrial maintenance/management experience required., • This position requires the knowledge of hydraulics, pneumatics, electrical, electronics (PLC), hydraulics, heating ventilation, air conditioning, carpentry, welding, machining and fabricating. The position also requires proficiency in troubleshooting the before listed categories., • Technical knowledge of maintenance equipment and capital project activities and experience leading associates of various skill levels required., • Must have well developed communication and basic math skills, organizational, analytical, and decision-making skills, efficient multi-tasking abilities, ability to supervise multiple workers in an often fast-paced environment, organizational skills, and able to foster a positive team working environment. Disclaimer: This description does not state or imply that the duties listed above are the only duties to be performed by the Associate. Associates are required to follow job-related instructions and perform other job-related activities requested by their supervisor. All requirements are subject to possible modifications in order to provide a reasonable accommodation to individuals with physical or mental disabilities as defined in the Americans with Disabilities Act. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other Associates. Nixon Medical is an equal opportunity employer. #IND1

Job Description Role Overview The Maintenance Technician & Trainer is responsible for advanced troubleshooting, repair, and maintenance of manufacturing and Packaging equipment, while also serving as a mentor and trainer for mechanics and operators. This role combines technical expertise with leadership, ensuring production continuity, conducting hands-on training sessions, and developing team skills in equipment operation, preventive maintenance, and troubleshooting. The position remains fully engaged in floor operations and is not exempt from performing direct technical work. Areas of Responsibility Technical Trainer: • Needs Assessment: Evaluate skill gaps in maintenance, mechanical/technical and machine operator teams and recommend or propose appropriate training., • Training program Development: Design and develop comprehensive training programs which outline the contents of the training along with instructional materials and training aids to teach individuals complex technical skills on equipment., • Training Delivery: Conduct on the Job training sessions including interactive troubleshooting sessions to teach technical concepts and practical skills to both maintenance and operational team members., • Program evaluation: Monitor and analyze the results of training programs and sessions to assess their effectiveness, gather feedback, and make necessary adjustments., • Attend FAT: Attend Factory acceptance testing for new equipment at manufacturers’ site, requires traveling both locally and internationally., • Support Equipment Installations & Validation: Provide support for new equipment installation by coordinating and working closely with manufacturer technicians and installers for the installation, commissioning and validation of new equipment while learning the new technology as well., • Trouble shooting: Assist in troubleshooting complex technical and mechanical issues on packaging and processing equipment., • Foster Teamwork: Maintain a work environment that supports teamwork and continuous process improvement., • Preventative Maintenance Coordination: Work closely with maintenance team to establish robust and effective preventative maintenance practices., • Document development: Assist in the creation of Preventive maintenance procedures and SOPs. Quality • GMP Compliance: Maintain proper growing and hygiene to ensure product integrity according to cGMPs and company policies., • Procedure Adherence: Follow batch records, SOPs, and cGMP guidelines to meet product specifications and tolerances., • Policy and Procedure Compliance: Ensure full compliance with company policies, procedures, GMPs, Ethical Business Practices, and SOPs always., • Foster Collaboration: Create an environment that respects and values diverse backgrounds., • Effective Communication: Establish and maintain effective relationships with peers, team members, and senior managers to ensure clear communication., • Goal Setting: Align goals and objectives with the organization for self and direct reports, create action plans, set milestones, and deliver progress reports and development plans for team members., • Employee Development: Develop employees to contribute to daily operational success., • Cross-functional Support: Learn and understand specific Facilities and Engineering operations to provide support in other areas as needed., • Safety and Responsibility: Work safely and responsibly to create an injury-free and incident-free workplace., • Training Compliance: Comply with all job-related safety and other training requirements., • Communication with Management: Keep management informed of area activities and significant Issues., • Extended Hours: Work extended hours, and occasional weekend overtime as required. Education & Qualification: • Degree Requirement: BA/BS degree in mechanical engineering with 3+ years of field experience., • Industry Experience: Minimum of three (3) years of work experience in nutrition, supplements, food, or pharmaceutical manufacturing industries., • None Required Skills & Ability • Teamwork: Demonstrates ability to work collaboratively and assist others., • Precision: Able to follow written instructions precisely and perform basic math calculations as required., • Regulatory Knowledge: Understands and is knowledgeable of cGMP, OSHA standards, etc., • Communication Skills: Ability to explain complex technical concepts clearly and effectively to diverse audiences., • Process Knowledge: Knowledge of processes including Blistering, cartoning, solid dose packaging etc..., • Lifting: Ability to lift 50 lbs. and occasionally lift and move up to 75 pounds., • Mobility: Must stand and walk on the production floor for a minimum of 6 hours per shift., • Manual Dexterity: Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, squatting, and walking short distances., • Flexibility: Occasionally works from a rolling ladder or step stool, able to lean over equipment, and kneel on the floor to clean under the equipment., • Manufacturing Setting: Work is regularly performed inside a manufacturing environment where temperatures can be moderate. Exposure to dust, odors, noise, and fumes is common. The noise level is usually moderate., • Chemical Exposure: Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job DescriptionOutside Sales SpecialistMust be in New Jersey! Base pay / Commission! Commissions are paid weekly! Urgently Hiring - Northeast Power Dry is hiring a Senior Sales Representative for a full-time position. Remote Sales- Dispatched from home: All appointments are scheduled by our dispatching coordinators, no cold calling! You will be dispatched from home and will go right to the job site. You will only need to come into the office for scheduled meetings. As a Senior Outside Sales Representative, you will determine the scope of work and provide estimates to homeowners in their times of need. Our customer service team pre-screens, pre-qualifies and sets up appointments. No cold calling — this is a hot-lead, one-call close opportunity. What We Offer (Our Benefits) Health & Wellness • Comprehensive medical, dental & vision insurance (some plans fully company-paid), • 401(k) with company match up to 4%, • Competitive base pay + performance bonuses / uncapped commission (if sales), • Weekly pay (for hourly/salary/ field roles), • Travel reimbursement for work-related trips, • Paid Time Off (PTO), • Paid holidays + 1 floating holiday, • Sick time that carries over year to year, • Paid training and certification support, • Opportunities for advancement and career growth, • Company vehicle, gas card & iPad (for field roles), • Meet with homeowners for in-home appointments (qualified leads are provided for you so no cold calling is needed), • Work remotely to meet with homeowners to determine the scope of work and provide estimates., • Provide solutions to homeowners in a time of need, • Execute top-notch customer service as a Sales Operation Manager, • Manage remediation crews to ensure progress and compliance of job, • Monitor job status and communicate job status with customers, company management, and insurance carriers, • Ensure to respond within one hour of receiving a notice for new jobs, • Computer skills are required with the ability to learn new systems., • Basic Math, • 3+ years of sales experience, • Valid driver’s license, • Proficient in technology and dealing with equipment and software, • Must be able to work overtime as needed and some holidays Northeast Power Dry was founded in 1996, with a mission to serve our community through our company values and provide our clients with solutions. We strive to provide a great work environment with a positive culture and provide our team members with a clear career path for growth. Our company is growing rapidly and looking for hard-working, dedicated people to join our amazing team. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Job Description Date 10/2025 Location 1200 Airport Road, North Brunswick NJ Title Technician, R&D Formulation Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Formulation Technician is responsible for supporting the formulation and manufacturing processes by accurately weighing, mixing, and processing raw materials in accordance with Standard Operating Procedures (SOPs), Good Manufacturing Practices (cGMP), and batch documentation requirements. This role involves hands-on operation and maintenance of various pharmaceutical production equipment and requires close adherence to quality, safety, and regulatory standards. Areas of Responsibility Technician, R&D -Level 1, Works under close supervision; learns formulation procedures, documentation, and equipment operation. Technician, R&D -Level 2 Works independently on complex formulation and scale-up activities; may train junior staff Technician, R&D -Level 3 Operates with minimal supervision; recognized technical expert and mentor within the R&D team. Develops and updates SOPs, batch records, and training materials. Oversees equipment readiness, preventive maintenance, and calibrations. Mentors’ technicians and ensures high-quality documentation and compliance. Supports technology transfer and production readiness reviews Key Responsibilities Level 1, 2 & 3 • Accurately weigh and transfer raw materials using calibrated balances and scales in accordance with approved batch records and formulation guidelines., • Perform formulation and manufacturing activities for pilot, scale-up, and commercial batch production., • Operate equipment for mixing, blending, granulation, and other material processing functions in support of pharmaceutical product development and manufacturing., • Complete and maintain accurate, compliant, and timely documentation, including Batch Manufacturing Records (BMRs), Logbooks, Protocols, and related forms in accordance with cGMP and SOP requirements., • Assist in the development and optimization of formulations for various dosage forms such as tablets, capsules, and granules, under the direction of senior formulation scientists or supervisors., • Independently execute and monitor benchtop, pilot-scale, and manufacturing scale-up batches with minimal supervision., • Set up, operate, clean, and perform changeovers on R&D and pilot-scale manufacturing equipment, including but not limited to:, • Tablet Presses, • Capsule Filling Machines, • Coating Machines, • Granulators, • Fluid Bed Dryers (FBDs), • Ensure equipment is properly maintained, sanitized, and operated in compliance with SOPs, safety protocols, and current Good Manufacturing Practices (cGMP)., • Proactively identify and troubleshoot issues during formulation development, demonstrating strong problem-solving skills and an ability to anticipate potential risks or failures., • Adhere strictly to all company policies, safety guidelines, and regulatory requirements., • Participate in routine housekeeping, equipment cleaning, and 5S/continuous improvement initiatives to maintain a safe and efficient working environment., • Perform additional duties and responsibilities as assigned by management to support departmental and organizational goals. Requirements Education & Qualification: Technician, R&D -1 • Requires High School diploma or GED, Associate degree preferred., • 1 to 4 years of experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes will be a plus. Technician, R&D -2 • Requires High School diploma or GED, Associate degree preferred., • 6 to 10 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Specific experience in oral solid dosage manufacturing, blending, compression, pan coating, fluid bed, or encapsulation manufacturing processes. Technician, R&D -3 • Associate’s or Bachelor’s degree in Chemistry, Biology, Engineering, or related scientific field, • 3 to 12 years’ experience working in a nutraceutical/pharmaceutical, biotech, or food manufacturing environment, regulated by GMP standards and requirements., • Requires hands-on experience or knowledge to set-up & operate Tablet, Capsule, Granulation manufacturing process equipment such as Tablet Press, Capsule Filling, Coating, Granulator, Fluid Bed Dryers, etc. and the ability to troubleshoot this equipment., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for issues such as sticking, picking, capping, chipping, compressibility, delamination, etc., • Works independently or in a team assisting others., • Performs basic math calculations and follow written instructions with accuracy and pay attention to detail., • Able to follow and understand cGMP, OSHA standards etc., • Able to distinguish different shades of colors., • Intermediate user of MS Office, Excel, Word, and Outlook, • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP’s, GLP, documentation) when performing the assigned activity., • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Able to lift up to 35 lbs.; occasionally lift and move up to 50 pounds., • Able to stand and walk on the production floor a minimum of 6 hours per shift., • Uses hands to finger, handle or feel, or to operate or to control objects. Able to lift up to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Able to occasionally work on a rolling ladder or step stool, or to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment.

Job DescriptionWe are looking for an Electronic Technician – Full–Time - $35 - $42/hr.***Job Summary: The Electronic Technician will modify, repair, and improve existing electronic products, equipment, and controls and will assist in developing new or updated electronic systems, components, or products. Primary Responsibilities: • Interfaces with maintenance department to identify replacement parts or components as needed., • Has knowledge of commonly used concepts, practices, and procedures within a particular field., • Applies principles and techniques of engineering to accomplish goals., • Relies on experience and judgment to plan and accomplish goals. Instructions and pre-established guidelines to perform the functions of the job., • Performs a variety of complicated tasks., • Primary job functions typically require exercising independent judgment., • Reports potentially dangerous electrical equipment to supervisor and takes steps to resolve the issue., • Performs safety checks to ensure design plans are feasible in various conditions., • May lead and direct the work of others., • Develops and maintains a high degree of positive employee attitude as applied to their jobs and fellow employees., • Typically reports to a supervisor or manager. A wide degree of creativity and latitude is expected., • Will be responsible for back up duties of Maintenance Manager as needed., • Responsible for other duties as assigned by Maintenance Manager. Qualification Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. • Ability to perform high level math aptitude functions., • Ability to read, comprehend and practice necessary safety procedures, signs, etc., • Thorough understanding of electronics principles and design., • Proficient in Microsoft Office Suite or related software., • Detail-oriented and organized., • Excellent problem-solving ability., • PLC, HMI and Temperature Controllers’ knowledge., • Electronics trouble shooting, repairs and installations., • Knowledge of 24v, 110v, 220v and 480v., • Troubleshooting, installing and programing of VFD’s., • Troubleshooting/repair/installation of relay logic circuits., • Basic electrical circuitry., • Multimeter proficient., • Ability to follow highly complex directions., • Excellent verbal and written communication skills throughout the organization at all levels., • Bi-lingual a plus., • Experience in a manufacturing environment is a strong plus. Education and/or Experience: • Requires a bachelor's degree in electrical/electronic engineering and/or a minimum of 5 years of experience in the field or in a related area. Work Environment: • This position normally works in a manufacturing environment., • Hearing, eye and foot protection are mandatory when engaged in activities in the plant., • Ability to work in 110-degree environment Physical Requirements: • Moderate physical activity involved., • A great deal of walking., • Lifting required., • Ability to distinguish various colors of wires and distinguish electronic system sections and wiringWorking Hours: Monday to Friday, 8:00 AM to 5:00 PM***Pay Range is based on experienceReasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: The Plant Engineer position will be responsible for leading engineering and maintenance activities at a site. Working under limited supervision, the Plant Engineer maintains production and quality by ensuring operation of machinery and the condition of the site. This position oversees skilled Technicians to maintain the facility, including grounds, buildings, equipment, and assets. The Plant Engineer will need to ensure compliance with safety, regulatory, and plant reliability to align equipment availability with operating requirements. Requirements: Essential Functions: • Create a high level of equipment availability through Planned Maintenance to minimize unscheduled repairs or equipment failures as measured by the departments KPI’s., • Through daily huddles and technician coaching sessions, maintain consistent communications with plant operations for scheduling, planning, and training purposes. Meet or exceed agreed KPI’s and individual goals., • Ensures Maintenance and Project expenses and objectives under span of control are met and on budget., • Use Lean concepts to identify and implement continuous improvement and systematic problem solving to remedy root causes for improved plant performance., • Coordinates activities with management to review planned maintenance, projects, objectives, timelines, and communications within the plant., • Responsibilities may include performing research, designing smaller or large projects within financial and operational scope, and implementing these projects, or sub-sets of complex projects., • Mentor and support the development of facility operations and maintenance personnel., • Delivery and support of cost saving initiatives to accomplish productivity targets., • Active support and participation in driving reliability and safety initiatives through root cause analysis, idea generation and task execution., • Oversees Maintenance Technicians and provides ongoing training to maximize the efficiency of the work force and meet operational requirements., • Process safety stewardship in all aspects; change management, hazard analysis and abnormal situation management., • Provides mechanical maintenance information by answering questions and requests and ensures operation of machinery by completing preventive maintenance requirements by following diagrams, sketches, manuals, manufacturer's instructions, and engineering specifications and troubleshooting malfunctions., • Maintains a safe and clean working environment by complying with site level Environmental and OSHA procedures, rules, and regulations. Upholds site level Environmental and OSHA records and reports as appropriate., • Strong leadership and interpersonal skills, project management, organization, decision making ability, relationship building and interfaces well with others. Specific skill-based competencies required to satisfactorily perform the functions of the job include adhering to safety practices; and operating equipment used in technical maintenance trades., • Ability to present information to others. Specific knowledge-based competencies required to satisfactorily perform the functions of the job include safety practices and procedures, and advanced fundamentals of MEP and general building preservation., • The ability to stand, sit and/or walk repeatedly throughout most of the workday., • When in the plant, subject to the outside environment with possible exposure to extreme temperatures (heat, cold, humidity, etc.)., • Position is occasionally exposed to fumes, odors, dust, mists, airborne particles, chemicals, heights, cramped quarters, oil, grease and dirt., • Normal lifting of up to 50 pounds is possible., • Mobility is necessary in order to perform assigned functions., • Noise level is moderate to heavy as the work area is a production environment., • Position requires the ability to occasionally work different shifts to monitor plant performance., • BS in Engineering preferred with a minimum of Five years’ experience in manufacturing systems or Ten plus years of experience leading a Technical team in a manufacturing environment., • This position requires the knowledge of hydraulics, pneumatics, electrical, electronics (PLC), hydraulics, heating ventilation, air conditioning, carpentry, welding, machining and fabricating. The position also requires proficiency in troubleshooting the before listed categories., • Technical knowledge of maintenance equipment and capital project activities and experience leading associates of various skill levels required. This description does not state or imply that the duties listed above are the only duties to be performed by the Associate. Associates are required to follow job-related instructions and perform other job-related activities requested by their supervisor. All requirements are subject to possible modifications in order to provide a reasonable accommodation to individuals with physical or mental disabilities as defined in the Americans with Disabilities Act. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other Associates. Nixon Medical is an equal opportunity employer. #IND1

Job Description Kreyco is a nationwide organization that specializes in PK-12 world language education. We support language learners of all kinds by connecting schools nationwide to teachers for Spanish, French, Italian, German, Mandarin, Japanese, Arabic, American Sign Language (ASL), and more. Our schools and students are our driving force, and as we seek to meet their needs, we are searching for language teachers of all sorts. Currently, we have an on-site math, high school teaching opportunity available for the 2025-2026 school year. Compensation varies and depends on your teaching project, ranging from $400 to $1,200 weekly. Daytime teaching availability is required. No night or weekend classes! Kreyco ensures that all of our teachers have everything they need to be successful in their classrooms. This includes providing a comprehensive curriculum to our teachers, connecting them to supervisors and mentors in our network, and offering numerous professional development opportunities completely free of charge. Kreyco always has our teachers' backs! Our team is constantly growing as more and more schools reach out, hoping to offer language instruction to their students. As our network of schools expands nationwide, so does our network of teachers. We are always seeking qualified teachers to join our team. Kreyco teachers are qualified, passionate, and dedicated educators. Our teachers may come from diverse backgrounds, with work experience in a wide range of careers, but all share a common goal: they believe in the positive impact that learning a second language can have on our students. If this belief resonates with you, Kreyco may be your new professional home. Job Summary: • Job Location: On-site, • Schedule: M-F, daytime teaching hours, • Employment Type: Independent contractor You can learn more about Kreyco and what it is like to work with us by following this link to watch a short video: Kreyco is hiring! We look forward to hearing from you soon! Requirements • Master's degree, • Live in the US and within commutable distance to school, • Authorized to work in the United States, • Ability to commute, • Professional development

Job Description GENERAL SUMMARY The Sylvan Teacher is responsible for creating a positive personal learning experience for students by teaching students using Sylvan program materials. Using the program materials, the teacher creates balanced and robust learning experiences for students. The Sylvan Teacher evaluates student progress on each assignment, communicates this progress, and works with Center staff to ensure learning is personal for each student. ESSENTIAL JOB FUNCTIONS ● Prepares for each instructional session; Gathers and prepares materials as appropriate ● Greets students and initiates instruction to personally engage each student ● Instructs students according to the design of the Sylvan programs ● Manages students, tasks and time to create a balanced and robust instructional session ● Evaluates and records the progress of each student on their program assignment ● Uses praise and encouragement to ensure students are engaged and inspired to learn ● Motivates students with Sylvan tokens given for specific achievements according to the Sylvan instructional management standards ● Records and tracks tokens earned by students ● Manages the conclusion of each instructional session and manages the completion of learning log and transition activities; Supports procedures to ensure student safety and well-being ● Communicates specific student needs to Center staff ● Attends periodic staff meetings and completes ongoing training as needed ● Completes certification training on each Sylvan program taught to students KNOWLEDGE REQUIRED ● Language Arts and Study Skills Program Teachers: o Four year degree or equivalent preferred o State or provincial teaching credentials (current or expired) preferred o Minimum of one or two years of teaching experience preferred ● Math Program Teachers: o Four year degree preferred in a discipline requiring 2 or more years of college level math o Upper Level Math preferred: Algebra I & II, Geometry ● Knowledge of general office equipment such as copiers, printers, and office phones ● Knowledge of tablet computers preferred SKILLS AND ABILITIES REQUIRED ● Proven ability to engage, motivate, and inspire students to learn ● Strong interpersonal and communication skills ● Proven ability to manage multiple tasks and be flexible ● Strong problem solving and customer service skills ● Strong team player The above statements are intended to describe the general nature and level of work being performed. They are not intended to be a complete list of all job responsibilities or skills, knowledge and abilities required. Company DescriptionAt Sylvan Learning of Edison, we’re focused on building academic confidence, igniting intellectual curiosity, and inspiring a love for learning – all of which make a big impact in school and in life. From math tutoring to reading and writing tutoring, we can help your child build confidence, become eager to learn and see real results in the classroom. Our personalized tutoring is tailored to your child’s specific needs to achieve the best results. In fact, Sylvan students achieve up to 3x more growth in their math and reading scores than their peers.At Sylvan Learning of Edison, we’re focused on building academic confidence, igniting intellectual curiosity, and inspiring a love for learning – all of which make a big impact in school and in life. From math tutoring to reading and writing tutoring, we can help your child build confidence, become eager to learn and see real results in the classroom.\r\n\r\nOur personalized tutoring is tailored to your child’s specific needs to achieve the best results. In fact, Sylvan students achieve up to 3x more growth in their math and reading scores than their peers.

Job Description SUMMARY: In this role, you will support the preparation, weighing, dispensing, and documentation of raw materials used in the manufacture of pharmaceutical products, ensuring full compliance with Good Manufacturing Practice (GMP) and standard operating procedures (SOPs). Key Responsibilities: • Dispense raw materials and components for production according to batch manufacturing records and SOPs., • Accurately weigh and label materials in a controlled, clean room or dispensary environment., • Maintain accurate stock records and inventory levels of pharmaceutical raw materials., • Ensure materials are stored correctly in line with regulatory and company guidelines., • Maintain cleanliness, hygiene, and organization in the dispensary and materials handling areas., • Ensure all dispensing activities are recorded and traceable to meet GMP and audit requirements., • Participate in audits, training, and continuous improvement initiatives as required., • Adhere strictly to Health & Safety and Environmental policies., • Support cross-functional teams in production, warehouse, and quality departments as needed., • Periodically push/pull containers weighing up to 500 pounds and lift containers up to 50 pounds. Qualifications & Experience: • High school diploma or equivalent required; further education in pharmacy, science, or healthcare is advantageous., • Previous 1-3 years’ experience in pharmaceutical or related industry., • Able to read, write and speak English fluently, Excellent writing and math skills required., • Experience in a GMP-regulated environment (pharmaceutical, or similar) preferred., • Knowledge of dispensing procedures, weighing techniques, and material handling practices., • Familiarity with pharmaceutical manufacturing documentation and regulatory compliance (e.g. GMP, GDP)., • Ability to follow SOPs precisely and maintain high attention to detail., • Basic IT skills (Microsoft Office, ERP systems or similar)., • Strong organizational, time management, and communication skills., • Ability to work independently and as part of a team in a highly regulated environment. Working Conditions: • Work is carried out in controlled areas including dispensaries and cleanrooms., • May involve wearing PPE such as gowns, gloves, face masks, and hairnets., • Physical requirements include standing for long periods, lifting containers, and precise handling of materials., • Shift work may be required, depending on production schedules. Safety: The incumbent must be able to perform this job safely in accordance with standard operating procedures and good manufacturing practices without endangering the health or safety of self or others.

Job Description Eye Level learning center , an after school supplemental education and enrichment program for Pre K -10 offers a teaching philosophy and education method where self-directed learning, individualized academic coaching, and critical thinking are at the core in helping children improve and excel in their academic pursuits. We are looking to hire tutors for Math for Eye Level's Piscataway and North Edison Centers to tutor students of different age group, All teaching materials will be provided. The teacher to student ratio will be very small. This is a part-time, evening and weekend position. Hours are flexible depending upon the availability of the tutors and the needs of the center. Classes go from 5 pm to 8 pm on week days. We are looking for someone who can work at least 2-3 weekdays or 2 weeks days and one weekend classes. REQUIREMENTS - • Passionate about kids and teaching, • Responsible, responsive, and enthusiastic, • Excellent communication skills Job Type: Part-time Pay: $17.00 per hour on w-2 Company DescriptionEye Level learning center a supplemental education and enrichment program, offers a teaching philosophy and education method where self-directed learning, individualized academic coaching, and critical thinking are at the core in helping children improve and excel in their academic pursuitsEye Level learning center a supplemental education and enrichment program, offers a teaching philosophy and education method where self-directed learning, individualized academic coaching, and critical thinking are at the core in helping children improve and excel in their academic pursuits

Job Description Pediatric Developmental Services (PDS) is looking to hire a Special Education Teacher to join our staff and work in an amazing school! Are you passionate about helping all students reach their potential? Do you love working in a bright, active, positive environment? Are you interested in joining an organization devoted to helping all children succeed? If so, we want to hear from you! This position comes with a competitive salary and generous benefits. Our benefits package includes: • Health, Dental, & Vision Insurance with company contribution, • IRA with company matching, • Fingerprinting reimbursement, • Special Education Teaching Certification, • Create and execute Individualized Education Plans (IEP) for each of the students in your care, • Communicate with other staff and family members about each student's progress and struggles, • Prepare detailed lesson plans and submit them to administrators for approval, • Participate in IEP meetings as scheduled by the school, • Use individualized reinforcement techniques to keep each student on the path toward greatness, • Invite family members to participate in each student's educational progress, • Create and distribute progress reports quarterly, • Confer with on-site therapist over disciplinary and behavioral issues with students If you feel that would be right for this SLP position, please fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! ABOUT PEDIATRIC DEVELOPMENTAL SERVICES Pediatric Developmental Services (PDS) provides the nation's public school districts, charter schools, and communities at large with highly qualified teachers and pediatric therapists, including Special Education Teachers; as well as speech, occupational, and physical therapists. At PDS, we want to make a difference in the lives of children. From finding and training the best pediatric therapists to partnering them with the right schools and clinics in need, PDS supports win-win initiatives for all. From speech-language therapy to Special Education Teachers, our children deserve the best care possible, and at PDS, we make that happen. For every therapist that works for us, we offer real support and a tailored mentorship program. We know that they are essential in our mission to make a difference in the lives of children. This is why we also offer competitive compensation and great benefits. Job Posted by ApplicantPro

Job Description GENERAL SUMMARY The Sylvan Teacher is responsible for creating a positive personal learning experience for students by teaching students using Sylvan program materials. The Sylvan Teacher evaluates student progress on each assignment, communicates this progress, and works with Center staff to ensure learning is personal for each student. ESSENTIAL JOB FUNCTIONS ● Prepares for each instructional session; Gathers and prepares materials as appropriate ● Greets students and initiates instruction to personally engage each student ● Instructs students according to the design of the Sylvan programs ● Manages students, tasks and time to create a balanced and robust instructional session ● Evaluates and records the progress of each student on their program assignment ● Uses praise and encouragement to ensure students are engaged and inspired to learn ● Completes certification training on each Sylvan program taught to students KNOWLEDGE REQUIRED ● Language Arts, Math (Elementary, Algebra 1 & 2, Geometry), and Study Skills Program Teachers: o Four year degree or equivalent preferred / 2 years college experience accepted o State or provincial teaching credentials preferred; prior experience evaluated as an alternative to certificates Company DescriptionAt Sylvan Learning of Edison, we’re focused on building academic confidence, igniting intellectual curiosity, and inspiring a love for learning – all of which make a big impact in school and in life. From math tutoring to reading and writing tutoring, we can help your child build confidence, become eager to learn and see real results in the classroom. Our personalized tutoring is tailored to your child’s specific needs to achieve the best results. In fact, Sylvan students achieve up to 3x more growth in their math and reading scores than their peers.At Sylvan Learning of Edison, we’re focused on building academic confidence, igniting intellectual curiosity, and inspiring a love for learning – all of which make a big impact in school and in life. From math tutoring to reading and writing tutoring, we can help your child build confidence, become eager to learn and see real results in the classroom.\r\n\r\nOur personalized tutoring is tailored to your child’s specific needs to achieve the best results. In fact, Sylvan students achieve up to 3x more growth in their math and reading scores than their peers.

Job DescriptionMust be in New Jersey! Base pay / Commission! Commissions are paid weekly! Urgently Hiring - Northeast Power Dry is hiring a Senior Sales Representative. for a full-time position. Remote Sales - Dispatched from home: All appointments are scheduled by our dispatching coordinators, no cold calling! You will be dispatched from home and will go right to the job site. You will only need to come into the office for scheduled meetings — this is a hot-lead, one-call close opportunity. As a Senior Outside Sales Representative, you will determine the scope of work and provide estimates to homeowners in their times of need. Our customer service team pre-screens, pre-qualifies and sets up appointments with customers for the Sales Representative with the help of our dispatch department. What We Offer (Our Benefits) Health & Wellness • Comprehensive medical, dental & vision insurance (some plans fully company-paid), • 401(k) with company match up to 4%, • Competitive base pay + performance bonuses / uncapped commission (if sales), • Weekly pay (for hourly/salary/ field roles), • Travel reimbursement for work-related trips, • Paid Time Off (PTO), • Paid holidays + 1 floating holiday, • Sick time that carries over year to year, • Paid training and certification support, • Opportunities for advancement and career growth, • Company vehicle, gas card & iPad (for field roles), • Meet with homeowners for in-home appointments (qualified leads are provided for you so no cold calling is needed), • Work remotely to meet with homeowners to determine the scope of work and provide estimates., • Provide solutions to homeowners in a time of need, • Execute top-notch customer service as a Sales Operation Manager, • Manage remediation crews to ensure progress and compliance of job, • Monitor job status and communicate job status with customers, company management, and insurance carriers, • Ensure to respond within one hour of receiving a notice for new jobs, • Computer skills are required with the ability to learn new systems., • Basic Math, • 3+ years of sales experience, • Valid driver’s license, • Proficient in technology and dealing with equipment and software, • Must be able to work overtime as needed and some holidays Northeast Power Dry was founded in 1996, with a mission to serve our community through our company values and provide our clients with solutions. We strive to provide a great work environment with a positive culture and provide our team members with a clear career path for growth. Our company is growing rapidly and looking for hard-working, dedicated people to join our amazing team. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. #INDHG

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Company parties, • Competitive salary, • Free food & snacks, • Health insurance Ideal candidate should possess the following: • Relevant experience in the industry (preferred at least a couple of years of work experience)., • Interest in concrete, steel, and foundation design, as well as Mechanical means and Methods for construction., • Experience with working with a team in a fast-paced environment and handle multiple projects and deadlines at once., • Working independently with little to no supervision while also providing communication internally with peers as well as external communication with clients. Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA preferred) , Solid Modeling software (Inventor), math programs, etc. Familiarity with structural steel design codes (LRFD / ASD), Wind / Seismic Codes, and or NYC Building Codes would be a bonus. Company Overview Patuxent Engineering, LLC provides construction engineering and support services in the high-rise building industries and heavy construction industry. Our services include temporary structures, shores, SOE, Existing Structure Stability evaluations, as well as material and personnel vertical transportation solutions, worker access solutions, heavy equipment applications as well as means and methods. Please attach a cover letter, resume, and list your salary requirements when responding with contact information.

Job DescriptionSalary: Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking a Estimating & Sales Engineer for our Binsky MCaP Division. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Estimating & Sales Engineer is a technically skilled, client-focused professional who plays a key role in both developing mechanical system bids and supporting business growth. This role bridges estimating and sales by working closely with clients to understand project needs, shape proposals, and develop competitive pricing strategies. Far from a back-office position, this role involves direct client engagement, strategic input, and a strong focus on delivering accurate, well-grounded estimates that support profitability and long-term relationships. Accountabilities • Attend client meetings, pre-bid walkthroughs, and presentations alongside business development and sales leadership., • Understand customer priorities beyond costsuch as timelines, logistics, and relationships., • Translate technical solutions into clear, compelling value propositions., • Build and maintain strong relationships with general contractors, engineers, and project owners., • Demonstrate a solid understanding of HVAC, piping, and plumbing systems., • Prepare and deliver complete, accurate, and timely estimates that reflect all project requirements., • Submit final bids that align with company sales objectives and profit targets. Qualifications: Skills • Proficient with estimating software and other construction-related technologies., • Strong ability to prioritize tasks, set goals, and manage multiple deadlines under pressure., • Skilled in reading and interpreting architectural, structural, and mechanical plans and specifications., • Familiar with a wide range of plumbing, HVAC, and process systems and terminology., • Solid foundation in plumbing and mechanical theory, including applicable codes and standards., • Strong math, analytical, organizational, verbal, and written communication skills., • Broad knowledge of commercial and industrial mechanical systems, including applications in data centers, hospitals, and R&D facilities., • Effective communicator with the ability to convey technical details clearly to clients and internal teams. Education and Experience • Bachelors degree in mechanical engineering a plus; solid experience in commercial plumbing and HVAC estimating required., • Experience with early design phase projects, negotiated work, GMP pricing a plus., • CRM experience, sales or client relationship management experience a plus. Physical Requirements Ability to sit for long periods of time, walk, stand, bend, stoop, use hands and fingers & lifting <40 pounds. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job DescriptionCompany Description One of the largest Franchisee in the tristate area. A company where People are first. We love our team members, and we create an environment where you can provide for your family and grow in the company. Job Description ABOUT THE JOB You were born to be the boss. We know. You get up in the morning and you make sure everyone else in the house is doing what they need to do. Then you go to work and you make sure that everyone there is doing what they need to do, even your boss. You just do that because you've always done it. Well maybe it's time you moved up. You want to be the boss? Well now's your chance - Domino's Pizza is hiring bosses - more specifically assistant managers. It's a tough job, one that needs a natural like you. Of course, you'll need some skills - judgment, math and the ability to multitask. You'll be working for a company that's fun and flexible. Not to mention, it's work experience you're going to use for a long time to come. You've had our pizza delivered to you, now help us be the best in pizza delivery. Go on, boss, show us what you've got. Apply now! JOB REQUIREMENTS AND DUTIES You are responsible for everything that happens during your shift. This includes all cost controls, inventory control, cash control and Customer relations. You must set the example. You must follow ALL policy and procedures 100% of the time and expect the same from your crew. In addition: Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect Image and adherence to standards, Great Customer Service, Attendance & punctuality, Transportation to/from work, Store cleanliness, Marketing, Profitability. ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From assistant manager to general manager, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! General Job Duties For All Store Team Members · Operate all equipment. · Stock ingredients from delivery area to storage, work area, walk-in cooler. · Prepare product. · Receive and process telephone orders. · Take inventory and complete associated paperwork. · Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills · Ability to comprehend and give correct written instructions. · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). · Must be able to make correct monetary change. · Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. · Ability to enter orders using a computer keyboard or touch screen. · Navigational skills to read a map, locate addresses within designated delivery area. · Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product. Work Conditions EXPOSURE TO · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. · Sudden changes in temperature in work area and while outside. · Fumes from food odors. · Exposure to cornmeal dust. · Cramped quarters including walk-in cooler. · Hot surfaces/tools from oven up to 500 degrees or higher. · Sharp edges and moving mechanical parts. · Varying and sometimes adverse weather conditions when delivering product, driving and couponing. SENSING · Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. · Depth perception. · Ability to differentiate between hot and cold surfaces. · Far vision and night vision for driving. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions. Additional Information PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required.Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Driving Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Driving Specific Job Duties Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver's license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery.

Job DescriptionCompany Description One of the largest Franchisee in the tristate area. A company where People are first. We love our team members, and we create an environment where you can provide for your family and grow in the company. Job Description ABOUT THE JOB You were born to be the boss. We know. You get up in the morning and you make sure everyone else in the house is doing what they need to do. Then you go to work and you make sure that everyone there is doing what they need to do, even your boss. You just do that because you've always done it. Well maybe it's time you moved up. You want to be the boss? Well now's your chance - Domino's Pizza is hiring bosses - more specifically assistant managers. It's a tough job, one that needs a natural like you. Of course, you'll need some skills - judgment, math and the ability to multitask. You'll be working for a company that's fun and flexible. Not to mention, it's work experience you're going to use for a long time to come. You've had our pizza delivered to you, now help us be the best in pizza delivery. Go on, boss, show us what you've got. Apply now! JOB REQUIREMENTS AND DUTIES You are responsible for everything that happens during your shift. This includes all cost controls, inventory control, cash control and Customer relations. You must set the example. You must follow ALL policy and procedures 100% of the time and expect the same from your crew. In addition: Staffing, Paperwork, Cost Controls, Cash control, Food management, Work to a Schedule, Perfect Image and adherence to standards, Great Customer Service, Attendance & punctuality, Transportation to/from work, Store cleanliness, Marketing, Profitability. ADVANCEMENT Many of our team members began their careers as delivery drivers and today are successful Domino's franchise owners. From assistant manager to general manager, general manager to franchisee or Manager Corporate Operations, our stores offer a world of opportunity. DIVERSITY Our mission is to recognize, appreciate, value and utilize the unique talents and contributions of all individuals. To create an environment where all team members, because of their differences, can reach their highest potential. SUMMARY STATEMENT We take pride in our team members and our team members take pride in Domino's Pizza! Being the best pizza delivery company in the world requires exceptional team members working together. At Domino's Pizza, our people come first! General Job Duties For All Store Team Members · Operate all equipment. · Stock ingredients from delivery area to storage, work area, walk-in cooler. · Prepare product. · Receive and process telephone orders. · Take inventory and complete associated paperwork. · Clean equipment and facility approximately daily. Training Orientation and training provided on the job. Communication Skills · Ability to comprehend and give correct written instructions. · Ability to communicate verbally with customers and co-workers to process orders both over the phone and in person. Essential Functions/Skills · Ability to add, subtract, multiply, and divide accurately and quickly (may use calculator). · Must be able to make correct monetary change. · Verbal, writing, and telephone skills to take and process orders. Motor coordination between eyes and hands/fingers to rapidly and accurately make precise movements with speed. · Ability to enter orders using a computer keyboard or touch screen. · Navigational skills to read a map, locate addresses within designated delivery area. · Must navigate adverse terrain including multi-story buildings, private homes, and other delivery sites while carrying product. Work Conditions EXPOSURE TO · Varying and sometimes adverse weather conditions when removing trash and performing other outside tasks. · In-store temperatures range from 36 degrees in cooler to 90 degrees and above in some work areas. · Sudden changes in temperature in work area and while outside. · Fumes from food odors. · Exposure to cornmeal dust. · Cramped quarters including walk-in cooler. · Hot surfaces/tools from oven up to 500 degrees or higher. · Sharp edges and moving mechanical parts. · Varying and sometimes adverse weather conditions when delivering product, driving and couponing. SENSING · Talking and hearing on telephone. Near and mid-range vision for most in-store tasks. · Depth perception. · Ability to differentiate between hot and cold surfaces. · Far vision and night vision for driving. TEMPERAMENTS The ability to direct activities, perform repetitive tasks, work alone and with others, work under stress, meet strict quality control standards, deal with people, analyze and compile data, make judgements and decisions. Additional Information PHYSICAL REQUIREMENTS, including, but not limited to the following: Standing Most tasks are performed from a standing position. Walking surfaces include ceramic tile "bricks" with linoleum in some food process areas. Height of work surfaces is between 36" and 48". Walking For short distances for short durations Delivery personnel must travel between the store and delivery vehicle and from the delivery vehicle to the customer's location. Sitting Paperwork is normally completed in an office at a desk or table Lifting Bulk product deliveries are made twice a week or more and are unloaded by the team member using a hand truck. Deliveries may include cases of ingredients and supplies weighing up to 50 pounds with dimensions of up to 3' x 1.5'. Cases are usually lifted from floor and stacked onto shelves up to 72" high. Carrying Large cans, weighing 3 pounds, 7 ounces, are carried from the workstation to storage shelves. Occasionally, pizza sauce weighing 30 pounds is carried from the storage room to the front of the store. Trays of pizza dough are carried three at a time over short distances, and weigh approximately 12 pounds per tray. During delivery, carry pizzas and beverages while performing "walking" and "climbing" duties. Pushing To move trays which are placed on dollies. A stack of trays on a dolly is approximately 24" - 30" and requires a force of up to 7.5 pounds to push. Trays may also be pulled. Climbing Team members must infrequently navigate stairs or climb a ladder to change prices on signs, wash walls, perform maintenance. During delivery of product, navigation of five or more flights of stairs may be required.Stooping/Bending Forward bending at the waist is necessary at the pizza assembly station. Toe room is present, but workers are unable to flex their knees while standing at this station. Duration of this position is approximately 30 - 45 seconds at one time, repeated continuously during the day. Forward bending is also present at the front counter and when stocking ingredients. Crouching/Squatting Performed occasionally to stock shelves and to clean low areas. Reaching Reaching is performed continuously; up, down and forward. Workers reach above 72" occasionally to turn on/off oven controls, change prices on sign, and lift and lower objects to and from shelves. Workers reaching down to perform such tasks as scooping cornmeal from a plastic barrel, or washing dishes. Workers reach forward when obtaining topping ingredients, cleaning work surfaces, or answering phones. Driving Deliver pizzas within a designated delivery area. A Team Member may make several deliveries per shift. Machines, Tools, Equipment, Work Aids Team Members may be required to utilize pencils/pens, computers, telephones, calculators, TDD equipment, pizza cutter and pizza peel. Driving Specific Job Duties Deliver product by car and then to door of customer. Deliver flyers and door hangers. Requires Valid driver's license with safe driving record meeting company standards. Access to insured vehicle which can be used for delivery.

Job Description Machine Operator Location & Employment Type Full-Time | 1st & 2nd Shift Opportunities Schedule: * 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM * 2nd Shift: Monday – Friday | 2:00 PM – 10:30 PM Training: 2nd shift employees will train on 1st shift (6:00 AM – 2:30 PM) for the first three weeks. Pay Rate: $23.00 / hour Type: Temp-to-Hire Bilingual (English/Spanish) preferred Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities * Set up and operate production machinery according to established procedures. * Monitor equipment performance and make adjustments to maintain quality and efficiency. * Perform changeovers between production formats and assist with troubleshooting. * Conduct pre-operation checks and basic preventative maintenance. * Communicate with team members and supervisors to maintain continuous production flow. * Follow cGMP standards, food safety regulations, and plant safety guidelines. * Keep machines and work areas clean, organized, and safe. * Participate in continuous improvement initiatives. Required Qualifications * Minimum 1 year of machine operation experience in a high-speed manufacturing environment. * High school diploma or equivalent. * Ability to read, write, and communicate effectively in English. * Strong analytical and problem-solving skills. * Ability to work independently and as part of a team. * Willingness to be trained and adapt to new processes. * Basic math and computer skills. * Bilingual (English/Spanish) strongly preferred. Physical Demands * Ability to lift up to 50 lbs frequently. * Standing, walking, pushing, and pulling throughout the shift. * Occasional exposure to noise, temperature changes, and dust typical of a manufacturing environment. Work Environment * Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). * Fast-paced, team-oriented production floor. How to Apply / Next Steps If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Job Description Machine Operator Location & Employment Type Full-Time | 1st & 2nd Shift Opportunities Schedule: • 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities • Set up and operate production machinery according to established procedures., • Monitor equipment performance and make adjustments to maintain quality and efficiency., • Perform changeovers between production formats and assist with troubleshooting., • Conduct pre-operation checks and basic preventative maintenance., • Communicate with team members and supervisors to maintain continuous production flow., • Follow cGMP standards, food safety regulations, and plant safety guidelines., • Keep machines and work areas clean, organized, and safe., • Minimum 1 year of machine operation experience in a high-speed manufacturing environment., • High school diploma or equivalent., • Ability to read, write, and communicate effectively in English., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • Willingness to be trained and adapt to new processes., • Basic math and computer skills., • Ability to lift up to 50 lbs frequently., • Standing, walking, pushing, and pulling throughout the shift., • Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Job Description Machine Operator Location & Employment Type Full-Time | 1st & 2nd Shift Opportunities Schedule: • 1st Shift: Monday – Friday | 6:00 AM – 2:30 PM Position Summary We are seeking a reliable and detail-oriented Machine Operator to join our production team. In this role, you will set up, operate, and monitor high-speed packaging and carton flow equipment. You’ll ensure machinery runs efficiently, perform changeovers, and maintain quality and safety standards in a fast-paced manufacturing environment. Key Responsibilities • Set up and operate production machinery according to established procedures., • Monitor equipment performance and make adjustments to maintain quality and efficiency., • Perform changeovers between production formats and assist with troubleshooting., • Conduct pre-operation checks and basic preventative maintenance., • Communicate with team members and supervisors to maintain continuous production flow., • Follow cGMP standards, food safety regulations, and plant safety guidelines., • Keep machines and work areas clean, organized, and safe., • Minimum 1 year of machine operation experience in a high-speed manufacturing environment., • High school diploma or equivalent., • Ability to read, write, and communicate effectively in English., • Strong analytical and problem-solving skills., • Ability to work independently and as part of a team., • Willingness to be trained and adapt to new processes., • Basic math and computer skills., • Ability to lift up to 50 lbs frequently., • Standing, walking, pushing, and pulling throughout the shift., • Moderate exposure to manufacturing conditions (temperature, noise, fumes, dust). If you’re ready to take on a key role in manufacturing operations and grow within a dynamic team, apply today to join us! ABOUT US PrideNow is Pride Global’s light industrial staffing organization, a distinguished division within the Pride Global umbrella. Aligned with Pride Global’s mission, we specialize in delivering top-tier human resources and workforce solutions to the light industrial industry. Leveraging the strength of our global network, PrideNow is dedicated to empowering diversity, ensuring compliance, and driving unparalleled success for businesses. EEO STATEMENT: As a certified minority-owned business, Pride Global and its affiliates are proud to be equal opportunity employers. All qualified applicants will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Additionally, candidates should have experience with drafting software (AutoCAD 2D/3D), structural analysis software (RISA preferred), solid modeling software (Inventor), and math programs. Familiarity with structural steel design codes (LRFD / ASD), wind/seismic codes, and NYC Building Codes is a p

Additionally, Interested candidates should have experience with drafting software (AUTOCAD 2d/3d), Structural analysis software, (RISA ) , Solid Modeling software (Inventor), math programs, etc.

What you'll need to succeed as a Forklift Operator at XPO.Able to do basic math calculations, with and without a calculator.Available to work a variety of shifts due to varying freight volumes, including days, evenings, nights and weekends.Dock or warehouse experience in the transportation industry.

Job Title: Customer Service Representative Location: Edison, NJ Type of Employment: Permanent In Office/Hybrid/Remote: In office Hourly: $24 - $25/hr Job Summary: LHH is partnering with a wellness services organization to hire a Customer Service Representative. This role is fully in office with hours from 9AM to 5:30PM with a 30-minute break, Monday through Friday. The qualified candidate should have at least 2 years of experience within a business to business consumer good industry and must have experience using an ERP system to process orders. The hourly rate is $24 - $25/hr based on years of experience. If this role is a fit to your background, please submit an updated resume for review. Responsibilities: · Answer incoming phone calls and emails from customers · Process sales orders and purchase orders · Invoice sales orders · Keep track of inventory · Coordinate shipments · Assist with product sample requests Required Experience: · High School Diploma · At least 2 years of related experience · Experience using an ERP system · Proficiency in Microsoft Office Suite · Excellent written and verbal communication skills · Ability to do basic math functions · Prior experience handling logistics is a plus Benefits are offered including medical, dental, vision and PTO. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ___ To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to

Job DescriptionSalary: The pay is commensurate with experience About the Organization: AEIS-Atlas Evaluation & Inspection Services is a leading engineering inspection and construction materials testing company in the NY Metro Area. We offer a unique work culture that blends professionalism with a strong focus on learning. Our founder's vision of a "Learning Organization" still drives us today. At AEIS, we lead with empathy and strive to develop leaders who, in turn, help others grow. We are an Equal Opportunity Employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected category. We comply with E-Verify and are a federal drug-free workplace. Join the AEIS family by applying today! Learn more at . Job Responsibilities: • Drive and transport samples and personnel around the NY Metro Area using company vehicles (Ford F-150, F-250, F-350, and similar)., • Complete all pickups and deliveries as assigned; ensure timely delivery to customers., • Keep daily/weekly driver logs and maintain mileage records., • Monitor and follow the maintenance schedule for all company vehicles., • Provide regular updates on your activities and location to the manager for work coordination., • Make daily calls to the department manager to report progress on tasks., • Pick up and deliver construction materials and equipment as needed., • Assist with office purchases and other administrative tasks., • Use navigation apps and GPS devices to find the most efficient routes; extensive knowledge of the NY Metro Area is a plus., • Interact with clients professionally and maintain positive relationships with them and inspectors., • Maintain an organized travel schedule., • Ensure vehicles have sufficient gas and are always ready for use., • Arrange vehicle repairs and conduct regular vehicle maintenance checks. Work Environment: • You'll work on active construction sites and occasionally in a soils/concrete testing lab, so expect to get dirty and work outdoors in various weather conditions., • Tasks may include handyman/landscaping duties, coring concrete/asphalt samples, and assisting construction material and machine shop personnel. Physical Requirements: • Long periods of standing and repetitive motions are required., • Ability to use hands for tasks such as handling, climbing, balancing, crouching, stooping, crawling, kneeling, and sitting., • Good vision (close, distance, peripheral, and depth perception) and sense of smell., • You may drive hundreds of miles per day and regularly lift/move up to 50 pounds, frequently move 60-80 pounds, and occasionally more than 100 pounds (like a loaded wheelbarrow of concrete samples). Qualifications: • 3+ years of driving experience in similar vehicles, with at least 1 year of driving experience in NYC., • Basic math skills., • Strong communication skills in English, both oral and written., • Ability to read maps and follow directions accurately. Job Details: • Job Type: Full-time, • Pay: From $18.00 per hour, • Expected Hours: 40 50 hours per week, • Day Shift: Starts at 5:30 a.m., • Location: In-person Benefits: • 401(k) matching, • Health insurance, • Paid sick time, • Parental leave, • Tuition reimbursement, • Vision insurance

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. GSVS VETERINARY EMERGENCY SERVICES EAST BRUNSWICK is excited to announce we are hiring Veterinary Technicians (CVT or Experienced) for our Emergent clinic! Shining a spotlight on our amazing veterinary technician: Veritas Role Spotlight: Veterinary Technician Specialist (youtube.com) GSVS Veterinary Emergency Services East Brunswick is a township in Middlesex County, in New Jersey. Garden State Veterinary Services, our sister ER/Specialty practice, has relocated to a 30,000 sq-ft facility in Woodbridge, as this will allow us to provide more advanced care for the communities of both our Iselin and Woodbridge locations. We are looking for Veterinary Technicians (CVT or Experienced) who would like to join our family and help us continue to provide veterinary care to the community we have faithfully served since 1994. Schedule: • Sunday - Wednesday or Sunday, Monday, Tuesday, and Thursday - 12:30pm - 10:30pm Veterinary Technicians are on the front lines of nursing care, providing appropriate medical care and treatments as ordered by the veterinarian. On any given day, you will: • Triage patients as needed, • Run laboratory tests, • Calculate medical math, • Place IV catheters and institute fluid therapy, • Maintain accurate treatment sheets and anesthesia records, • Obtain and prepare various blood samples for diagnostic testing, • Assess pain scale of patients and support as needed, • Act as patient's advocate and provide quality, compassionate care for hospitalized patients, • Provide client education on a wide range of at home care, • Administer and monitor anesthesia, • Administer medications, • Assist in patient care About you: • Veterinary Technician, CVT/LVT preferred or a minimum of 2 years' experience as a Veterinary Technician and proficient with anesthetic monitoring, • Proficiency in processing basic laboratory specimens, • Working knowledge of anatomy and physiology, • Understanding of normal vs abnormal physiologic ranges, • Commitment to help mentor and train veterinary assistants, • Ability to work well and multi-task in a fast-paced environment., • Compassionate, positive outlook and friendly, team-orientated attitude, • Excellent communication and organizational skills, • The ability to deliver exceptional client service, • Honesty, integrity, and a desire to learn and have fun! GSVS is proud to offer the following benefits: • Competitive salary based on your level of experience, • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan – 401K with employer match, • Licensing fees paid for credentialed technicians, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided Veritas Veterinary Partners is an equal opportunity employer. In accordance with the requirements of all applicable federal, state and local laws, we welcome and encourage diversity in the workplace regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Applicants must be authorized to work in the U.S. All current positions require the ability to speak, read, and write English proficiently. Additional fluency in other languages is preferred but not required. For CA applicants please visit our Privacy Policy

Job Description Job Description Date 06/25 Location 1300 Airport Road, North Brunswick NJ Title Driver Department Warehouse Reports to Manager, Warehouse FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Truck Driver will be responsible for transporting goods from one place to another using trucks. Load / unload cargo and assist in warehouse operations as needed. All functions may require use of powered industrial trucks. Areas of Responsibility • Receives products from domestic and overseas vendors, transfers, customer returns, refused shipments, and non-inventory support products., • Accurately audits and verifies all incoming quantities for entry into computerized inventory., • Performs on and off-site warehousing duties to include: the initial movement of materials to appropriate locations, effective space utilization, and material retrieval delivery, using powered industrial equipment as needed., • Performs order fulfillment duties to include reviewing and prioritizing available orders, determining stock requirements, and maintaining levels of required inventory, physically picking, and packing orders, auditing, and verifying picked orders, preparing completed orders for shipping., • Transport finished goods and raw materials over land to and from manufacturing plants or retail and distribution centers., • Inspects vehicles for mechanical items and safety issues and perform preventative maintenance., • Plans routes and meet delivery schedules., • Documents and log work/rest periods and miles spent driving and retain fuel/toll receipts., • Complies with truck driving rules and regulations (size, weight, route designations, parking, and break periods) as well as with company policies and procedures., • Maneuvers trucks into loading or unloading positions., • Collects and verifies delivery instructions., • Reports defects, accidents, or violations, • Performs shipping duties to include Locating pallets to the dock, performing dock audits, verifying driver information, loading shipments on to trucks, properly filling out and signing BOL, packaging slips, and verifying documents are matched, tracking shipments., • Ensures safety and quality standards are consistently followed, complying with all DOT regulations., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Responsible for maintaining and storing equipment, keys, refueling the truck, gas, expenses and to notify management of any breakdowns or maintenance issues., • All drivers must be familiar with and perform a daily pre trip and post trip inspection on their truck., • Maintains proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime., • Helps on the floor to assist Material Handlers and drive the forklift both sit down and stand up as needed, • Safety shoes are required to be worn for this position., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 2+ years in distribution/warehousing, • Minimum of one (2) year work experience in nutritionals, supplements, food or pharmaceutical manufacturing industries preferred., • Proven work experience as a truck driver. Minimum 2+ years’ commercial driving experience or driving a box truck., • Must be able to pass a physical exam., • Hands-on experience with electronic equipment and software (GPS, AVL units, CB etc.), • Ability to drive long hours and travel regularly., • Extensive knowledge of applicable truck driving rules and regulations, • No recent moving or driving violations., • Adaptability and foresight to handle unexpected situations (traffic, weather conditions etc.), • Must pass CDL physical exam., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets., • Prior forklift driving and ticketing experience needed., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be Low, moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st - 7:30am to 4:00pm

Job DescriptionBenefits: • Bonus based on performance, • Company car, • Competitive salary, • Paid time off, • Training & development Oppportunity for New Jersey Based Closers! No cold Calling! No door knocking! No searching for leads! We provide all the hot leads! You provide: high leverage sales techniques to complete the one visit close in-home appointments. Urgently Hiring - DryTech Restoration is hiring a Outside Sales Representative for a full-time position. We are a Water Damage Restoration Company. Many times we can work with the customers homeowners insurance to sell our services. In Home Sales: All appointments are scheduled by our dispatching and customer service coordinators, no cold calling, no drumming up leads! You will receive 3-5 leads pre day! You will be dispatched and will go right to the job site! One visit close in-home appointments. As an Outside Sales Representative, you will be selling emergency water damage restoration services. Our customer service team pre-screens, pre-qualifies and sets up appointments with customers for the Sales Representative with the help of our dispatch department. This position requires no cold calling but high leveragesales techniques to complete the one visit close in-home appointments. Benefits: • Weekly compensation, • Competitive commission plan, • Company car with fuel card, • Company cell phone, • Company laptop, • Docusketch, • Paid time off, • Meet with homeowners for in-home appointments (qualified leads are provided for you so no cold calling or door knocking needed), • Meet with homeowners to determine the scope of work and employ one visit close, • Provide solutions to homeowners in a time of need, • Execute top-notch customer service, • Manage remediation crews to ensure progress and compliance of job, • Monitor job status and communicate job status with customers, company management, and insurance carriers, • Ensure to respond within one hour of receiving a notice for new jobs, • Computer skills are required with the ability to learn new systems., • Basic Math, • Water restoration experience a plus., • 3+ years of sales experience, • Valid drivers license, • In home sales experience a plus. If you are interested in learning more about a career with DryTech Restoration as a Outside Sales Representative, apply today!