Mechanic jobs in New Hyde Park, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $25.00/Hr.

Job DescriptionEstablished Plumbing company seeking Plumbing Mechanic with experience in jobbing, trouble shooting skills, service and installation of gas boiler and heating systems. Must have knowledge of NYC gas and plumbing codes in order to perform plumbing services. Must be able to occasionally work weekends and after hours emergency calls. Not afraid of a challenge. New Trucks, uniform and apprentice will be provided. Plenty of room for growth. Applicant must be able to pass background check and drug test. Must be able to keep work truck properly stocked and organized. Must have positive communication skills and be neat in appearance. Clean Drivers License Required.

Job DescriptionWe are looking for a Jr. Mechanic who has experience piping Boilers, doing gas and control work.Troubleshooting heating systems. Technician must have a minimum of 3-4 years field experience. Thess skill sets are required: • Installation and repair of Oil and gas fired Boiler's, Oil and gas fired Furnaces., • Must have at lease 3 years experience installing and properly supporting pipe., • Flare and swedge copper pipe., • Threading pipe., • Trouble shooting & installing Circulation Pumps., • Comfortable with the use of a multi meter., • Know how to use power tools., • Must feel comfortable climbing extension ladder 12-20 feet high., • Recover refrigerant., • Charge a system with refrigerant., • Installation of VRF, VRV or heat recovery Ductless mini split systems., • Know how to read electrical schematics., • Know how to trouble shoot power supply voltages and control circuits., • Have an in depth understand of refrigerant cycles and Compressors., • Be EPA certified. Must have a desire to learn new industry technologies and skills. Takes pride in what they do, this should be visible in the quality of their work. Is organized and punctual. Can keep vehicles organized. Trustworthy. We are looking for Team members that are not afraid of responsibility and love what they do. Position requires 2 Saturdays a month, Monday-Friday hours usually consist of 10-12 hours per day during peek season. More about these shifts can be discussed during interview. Applicants will be required to pass a small verbal exam. We look forward to speaking with you.

Job DescriptionPower-Flo Technologies is a temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for an HVAC Controls Mechanic to work independently in the field to startup, service, and support temperature control systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand), • Experience with ACAD, or similar CAD software, • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification, • Ability to read and interpret blueprints, specifications, and program/design to meet sequence of operations of both design/build projects as well as plan/spec projects Additional Necessary Qualifications • 3 years of building automation experience required, • Strong understanding of commercial HVAC systems operations, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook), • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools, • Mechanical aptitude required, • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams, • Valid and clean NYS Driver's License, • OSHA 30 and site safety training Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Description Successful candidates must be able to perform a wide variety of HVAC repair/installation and maintenance tasks in the residential and commercial market. This position has potential for growth within our family-owned company. The ability to provide a high level of customer service is essential to this position. We are looking for a team player who is committed to providing excellent customer service while working in a safe, timely, and professional manner. Work includes general residential and commercial heat pump, AC condenser, furnaces, geo-thermal heating and air conditioning, air purification and ventilation. Pay: $30-$55 Per hour DOE Type: full time permanent employment! Location: Western Long Island, Westchester County, and 5 Burroughs. Responsibilities: • Service Air conditioning and heating systems in residential and commercial environments in accordance with current codes., • Analyze, diagnose, and resolve customer problems in a courteous, professional, timely, and accurate manner., • Identify potential problems to prevent premature and unexpected breakdowns or callbacks., • Communicate effectively with customers to answer questions, resolve problems, and ensure complete customer satisfaction., • Promote products and services to customer., • Produce and maintain organized records and reports., • Maintain company vehicle in clean and proper working order with an organized inventory of HVAC repair necessities., • Ensure company tools are being used safely, maintained properly and accounted for., • Have own tools to perform repair/installation and maintenance on HVAC systems., • Represent the company professionally, honestly, and ethically in all business matters and activities., • Must have a driver's license, clean driving record and capability to pass a drug/alcohol test., • Must be willing / able to work overtime and on call rotation., • Effective written and verbal communication skills, • Efficient time-management and organizational skills., • Familiarity with national, state and local HVAC code regulations., • High school graduate or equivalent., • Graduate from a trade/vocational school HVAC program or other construction-related program preferred., • EPA Certification 608 Certification., • The physical ability to work in ceilings, crawl spaces, chases and other confined work areas is also required. Click here to learn more about Crete United: Benefits: • Medical, • Dental, • Vision, • 401K, • Company Vehicle!, • Opportunity for growth!, • On the job continued education Dynaire, a Crete United company, is an equal opportunity employer, considering all applicants for employment regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, sexual orientation, genetic information, or any other characteristic protected by state of federal law. Women and minorities are encouraged to apply.

🔧 Mechanic Location: Royal Waste-Jamaica or our Bronx Location Schedule: Monday through Friday, with alternating Saturdays as needed Hours: 8:00 AM – 4:30 PM Rate: $30–$40/hr, depending on experience Employment Type: Full-time Royal Waste is seeking a dedicated and skilled Mechanic to join our growing maintenance team. We're looking for individuals who prioritize safety, take pride in their work, and understand how critical their role is to supporting our drivers and the service we provide to the community. Key Responsibilities * Perform inspections, repairs, and diagnostics on diesel vehicles, including electrical, hydraulic, suspension, brake, and air systems * Interpret vehicle computer system failure codes and make necessary adjustments to engine and vehicle control modules * Review and complete repairs noted on Driver Vehicle Inspection Reports * Accurately document services using fleet maintenance software * Conduct post-service test drives to ensure safety and performance * Collaborate with teammates on complex repairs * Maintain professional, courteous communication with drivers and team members * Keep workspaces clean and compliant with OSHA standards * Perform other job-related duties as assigned What We're Looking For * Minimum 5 years of mechanic experience, preferably with diesel trucks * Strong skills in electrical and hydraulic systems * Well-rounded experience in mechanical and welding repairs * Familiarity with diesel vehicle diagnostics and preventative maintenance * Basic tool set required * Valid CDL Class B or A license, not required but a big plus * Ability to work independently within a shop environment * Commitment to safety, quality, and teamwork What We Offer * Competitive compensation * 401(k) with company match * Medical, dental, and vision coverage * Life insurance and short-term/long-term disability * Employee Assistance Mental Health Program * Emergency Travel Assistance & Prepaid Legal Plan * Employee Stock Purchase Plan & Employee Relief Fund * Scholarship opportunities for employees’ children Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

Who Are We? WASTE CONNECTIONS, Inc. (NYSE: WCN) is not only the best waste services company in North America, it is also an amazing place to realize your potential, make decisions, have your voice heard, and partner with extremely hard working and passionate people! We seek servant leaders, mentors, top performers, and fun people. At Waste Connections, we value each individual’s unique background, experience, and passion to make us a great place to work. Why you need to join us! • CULTURE: It’s a Great place to work! We work in an environment where empowered, self-directed all-stars know what they do is important., • INTEGRITY: Our definition is “saying what you will do and then doing it!” We keep our promises to our customers and our employees., • RESPECT: We show respect for our customers and fellow employees. Respect for ourselves grows through all the hard work and great service we provide to the communities we are privileged to serve. Salary Range: $125,000 - $135,000 plus bonus Position Responsibilities: • Ensures adherence to the corporate safety program., • Fosters collaboration between and among personnel., • Ensure adequate training of mechanics, preventative maintenance mechanics., • Ensure location is in compliance with all regulatory agencies and statutes., • Ensure proper completion of repair orders by all technicians., • Responsible for the control of inventory and maintenance of equipment., • Trains and assists Mechanics on methods for diagnosing and repairing vehicles and equipment., • Schedules or assigns work to Mechanics, PM Mechanics or other Maintenance Shop personnel., • Coordinates and/or transports vehicles to outside service for repairs, as needed., • Tests vehicles to troubleshoot problems and/or tests repairs to ensure proper and safe completion., • Makes emergency road calls to repair trucks., • Communicates regularly with the Division Maintenance Manager., • Assists in monthly financial projections and annual budget., • Responsible for maintaining department’s costs within budget Knowledge and Skills: • Must have ability to plan, budget, schedule, and supervise multiple projects from concept to completion., • Must have excellent working knowledge of DOT compliance requirements., • Must have ability to motivate staff to meet corp., region, division, and district objectives., • Must have excellent organizational, analytical and communication skills and ability to achieve cost effective solutions. Requirements: • 5+ years mechanic experience with truck, light or heavy equipment maintenance and repair. (Waste industry experience desired), • Ability to train and motivate staff a must., • Knowledge of air brake, hydraulic and electrical systems., • Trade or Technical School Certificate preferred. High School or Equivalent required., • Holds or ability to certify for CDL within 90 days of start date., • Proficiency in vehicle and equipment diagnosis and repair. Waste Connections is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to disability or protected veteran status. #ACMaintenance

We are seeking Auto Mechanic "B" and Exhaust Mechanic or Exhaust Trainee Skills and Requirements: Oil & Filter Changes Brake Systems Suspensions Tune-ups Struts/Shocks Tire Rotations NY State Inspection License (helpful) Employment Type: Full Time Bonus/Commission: No.

Job DescriptionMUST BE LOCAL TO MERRICK!Key responsibilities include: • Assessing damage, • Thoroughly inspecting vehicles to identify the extent of structural damage, including frame alignment issues, major panel damage, and potential safety concerns, • Frame straightening, • Utilizing specialized equipment like frame machines and pulling tools to realign bent or twisted frames to factory specifications, • Panel replacement, • Removing and replacing severely damaged body panels like doors, fenders, hoods, and roof sections using cutting and welding techniques, • Welding repairs, • Performing complex welding procedures to join new metal sections to existing frame or body parts, including spot welding, MIG welding, and TIG welding, • Metal fabrication, • Shaping and fitting replacement metal panels to match the vehicle's original contours using hand tools and power tools, • Body panel alignment, • Ensuring proper fit and alignment of replaced panels to maintain the vehicle's aesthetics and functionality, • Preparation for paint, • Grinding, sanding, and filling repaired areas to create a smooth surface ready for paint application, • Collaboration with other technicians, • Working closely with the owner, other auto body technicians like painters and detailers to complete the overall repair processRequired skills and qualifications:, • 5 years or more of extensive experience in auto body repair is a requirement., • Ability to read, write and speak english fluently is a requirement, • A valid driver's license is required, • A strong understanding of vehicle construction, frame design, and collision repair techniques, • Advanced welding skills, • Proficiency in various welding methods, including MIG, TIG, and spot welding, • Metal fabrication skills, • Ability to shape and manipulate metal to create accurate replacements for damaged parts, • Precise measuring and alignment skills, • Accuracy in using measuring tools to ensure proper frame alignment and panel fit, • Physical strength and endurance, • Ability to handle heavy metal parts and perform demanding physical tasks, • Attention to detail, • High level of precision needed to achieve accurate repairs and quality finishes

Job Description BCforward is currently seeking a highly motivated Maintenance Mechanic for an opportunity in Hicksville, NY! Position Title: Maintenance Mechanic Location: Hicksville, NY 11802 Anticipated Start Date:ASAP Please note this is the target date and is subject to change. BCforward will send official notice ahead of a confirmed start date. Expected Duration: 6+ Months with possible extension. Job Type: FULL TIME 40 hours a week, CONTRACT, ONSITE Pay Range: $30/HR Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Job Description: Special machines to operate: Manlift. Power and hand tools only. The Maintenance Mechanic is responsible for a variety of skilled maintenance, repair and troubleshooting tasks, in and about facilities and manufacturing equipment. Essential Functions: Diagnose problems and determine the extent of repairs or adjustments needed for equipment. Maintain, adjust, repair, rebuild and overhaul equipment, enter repair orders and keep maintenance records of time spent, materials and parts used, and type of work performed in automated system. · Organizes, cleans, and maintains workshop area. · Familiar with hands and power tools. · Able to read and understand maintenance and specification manuals, Follow oral and written instructions. · Capable of preparing work orders and records of service performed, Communicate, and work effectively with all associates, Physical dexterity, and ability to perform preventive maintenance on complex equipment. · Able to perform all duties of a mechanics helper without supervision. · Standing -Entire shift, Lifting up to 50 lbs.-Regularly, Noise typical of a production environment- Entire shift. · Working around moving equipment-Regularly, Working in hot/cold temperatures-Regularly. Required-Steel Toed Shoes. · Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. Benefits: BCforwardoffers all eligible employees a comprehensive benefits package including, but not limited to major medical, HSA, dental, vision, employer-provided group life, voluntary life insurance, short-term disability, long-term disability, and 401k. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description Job Type: FULL TIME 40 hours a week,, ONSITE Pay Range: $30/HR Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Job Description: Special machines to operate: Manlift. Power and hand tools only. The Maintenance Mechanic is responsible for a variety of skilled maintenance, repair and troubleshooting tasks, in and about facilities and manufacturing equipment. Essential Functions: Diagnose problems and determine the extent of repairs or adjustments needed for equipment. Maintain, adjust, repair, rebuild and overhaul equipment, enter repair orders and keep maintenance records of time spent, materials and parts used, and type of work performed in automated system. · Organizes, cleans, and maintains workshop area. · Familiar with hands and power tools. · Able to read and understand maintenance and specification manuals, Follow oral and written instructions. · Capable of preparing work orders and records of service performed, Communicate, and work effectively with all associates, Physical dexterity, and ability to perform preventive maintenance on complex equipment. · Able to perform all duties of a mechanics helper without supervision. · Standing -Entire shift, Lifting up to 50 lbs.-Regularly, Noise typical of a production environment- Entire shift. · Working around moving equipment-Regularly, Working in hot/cold temperatures-Regularly. Required-Steel Toed Shoes. · Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. Benefits: BCforwardoffers all eligible employees a comprehensive benefits package including, but not limited to major medical, HSA, dental, vision, employer-provided group life, voluntary life insurance, short-term disability, long-term disability, and 401k. About BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class place to work. BCforward is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. To learn more about how BCforward collects and uses personal information as part of the recruiting process, view our Privacy Noticeand CCPA Addendum. As part of the recruitment process, we may ask for you to disclose and provide us with various categories of personal information, including identifiers, professional information, commercial information, education information, and other related information. BCforward will only use this information to complete the recruitment process. This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description We are looking for a Heating Ventilation And Air Conditioning Mechanic to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements., • Fabricate sheet metal ductwork in our shop., • Install sheet metal ductwork in the field., • Install refrigerant piping., • Install chilled water piping systems, • Previous experience in HVAC or other related fields., • Familiarity with reading sheet metal shop drawings, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job DescriptionWe are currently seeking to hire a laborer/general mechanic that can support our pump and motor repair shop. Laborer Responsibilities Assist with the following: • Disassemble pumps and electric motors to determine cause of failure and what is required to repair., • Install replacement bearings, seals, shafts, and gaskets on various equipment., • Troubleshoot pump systems in the field using a multimeter., • Make repairs in the field to pumps, motors, and fans., • Use power tools, hand tools, and multimeter to repair pump system in the field., • Work with a helper to complete repair jobs both in shop and on the road., • Replace and wire electric motors at job sites. Perform troubleshooting of pump sets and simple controls (motor starters). Compensation between $18 - $22/hour Benefits Package • Medical, dental, vision, • PTO Program and Paid Holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Laborer Necessary Qualifications • Technical/mechanical background, • Solid verbal and written communication skills, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Experience using all types of mechanics tools., • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Ability to troubleshoot problems and independently repair., • Knowledge of alignment techniques., • Ability to troubleshoot systems in house and in the field., • Familiar with the installation, service, and maintenance of various pumps and motors a plus, • A valid and clean driver's license (7 years' clean) to operate company vehicles is required Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Aerotek - JobID: JP-005850411 [Maintenance Mechanic] As a Pipefitter at Aerotek, you'll: Install pipe for steam, hot water, heating, cooling, lubricating, sprinkling, and production and processing systems; Perform hand prep piping for backing rings and butt welds; Use grinders or cutting machines.

Essential Job Summary:: Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Requirements and Qualifications:: 3-5 years’ experience as class A or B mechanic C

DUTIES and RESPONSIBILITIES (include, but not limited to): Experience in installation, maintenance and repair of doors and doorframes. Perform routine preventative maintenance on common space doors. Experience in installation of doorknobs and locks.

Job Description Responsibilities: • Diagnose and repair residential & commercial sprinkler systems, • Install irrigation systems, valves, heads, and controllers, • Perform seasonal start-ups and winterizations, • Troubleshoot electrical and water pressure issues, • Prior irrigation experience preferred, • Knowledge of sprinkler controllers & valves, • Ability to work outdoors in various weather conditions, • Valid Driver’s License, • Competitive pay based on experience, • Full-time position, • Opportunity for growth Call our office at (516) 334-2042 Or email your resume to: [] Company DescriptionC &C Sprinkler is an established Nassau County irrigation company with over 26 years in the business.C &C Sprinkler is an established Nassau County irrigation company with over 26 years in the business.

Job DescriptionJob Title: Mechanical Technician Are you a hard-working individual, looking for the opportunity to carve out a successful career in an organization where the spirit of family, ethics, good business practice and hard work share equal billing? If so, our ANDI group of companies may be a good place for you to find your niche! We are committed to rewarding skill, perseverance and a positive attitude with opportunities for growth. We are a multi-faceted enterprise involved in Sales, Service, Training, Certification, Equipment Fabrication, Equipment Installation, Maintenance and Repairs. The focus industry is Hyperbaric Chambers and Support Equipment. Intrigued? Read on to learn more! Required Skill Set : Aptitude for mechanical assembly and repairs. Small motors, compressors, oxygen concentrators and refrigerated dryers are among our products. Training is provided but the basic skill set is mandatory. Position Responsibilities: The Mechanical Technician is responsible for assembling and servicing various small machinery such as compressors & oxygen concentrators including assembling gas manifolds and other pneumatic plumbing assemblies as trained and directed. * Ensures accuracy of information in the system and compliance with internal controls.* Confirms adequate inventory for the production schedule.* Capable of providing technical support on the equipment systems that have been mastered. Qualifications& Knowledge * High school diploma * Minimum one year of experience as a mechanic or technician * Basic computer skills and applications such as MS Excel, MS Word or Corel WordPerfect, e-mail app such as G-mail or Outlook. *Ability to follow written instructions and directions * Ability to use basic math and numbers, and to use a computer terminal, calculator, and telephone. * Ability to multitask and pay attention to detail * Ability to work under immediate supervision *Ability to pass a drug test * Ability to work hours mandated by management. *Ability to identify mechanical parts and fittings (including plumbing fittings) products based on Material, size, class, grade, type, etc. after basic training. * Ability to verbalize and/or document areas of deficiency with regard to manufacturing, inventory control, record keeping policies and procedures * Ability to collect all data relative to a problematic situation and determine specifically what needs to be done to correct it. * Has a Driver’s License and Car for personal transport Conduct: Highly motivated, positive and enthusiastic * Clean and Neat in appearance * Good interpersonal skills, and good listener and communicator * Process oriented * Eagerness to learn * Be a team player and always support the Company's goals * Being punctual and reliable is a must. * No smoking

Job Description Shift Availability: Multiple shifts available (morning, afternoon, and overnight). Applicants should indicate their preferred shift during the application process. Flexibility is valued in a 24/7 aviation environment. About Symbrant Aviation Services Symbrant Aviation Services is a rapidly growing provider of mission-critical airport maintenance operations. We partner with airlines and airport authorities to support safe, reliable, and efficient airport operations. Our teams maintain and support baggage handling systems, passenger boarding bridges, PCA/GPU units, and industrial facility systems in safety-sensitive aviation environments. Position Summary The Maintenance Mechanic is responsible for performing preventive and corrective maintenance on critical airport mechanical and electromechanical systems. This role supports daily airline operations by ensuring equipment remains reliable, safe, and fully operational in a 24/7 environment. Key Responsibilities • Perform scheduled preventive maintenance on belts, rollers, bearings, motors, pulleys, and gearboxes., • Inspect, maintain, and repair Baggage Handling System (BHS) components including sensors, photo-eyes, drives, diverters, and conveyor assemblies., • Support maintenance and repairs on Passenger Boarding Bridges (PBB), Pre-Conditioned Air (PCA), and Ground Power Units (GPU)., • Troubleshoot mechanical and basic electrical issues including motors, relays, limit switches, wiring faults, and VFD-related issues., • Respond promptly to equipment alarms and operational service calls., • Complete work orders and preventive maintenance documentation using a CMMS (UpKeep or similar)., • Follow all Symbrant, airport authority, and OSHA safety regulations., • 1-3 years of mechanical or maintenance experience (industrial, aviation, facilities, manufacturing, or automotive)., • Strong mechanical troubleshooting skills., • Ability to read mechanical diagrams and follow procedures., • Ability to lift up to 50 lbs, work at heights, and safely navigate industrial environments., • Valid driver's license and ability to pass airport background checks., • OSHA 30 certification required OR willingness to obtain OSHA 30 upon hire., • Experience with BHS, PBB, PCA, or GPU systems., • Exposure to HVAC systems., • Low-voltage electrical troubleshooting experience.

Job Description **Job Summary: ** The Maintenance Mechanic is responsible for a variety of skilled maintenance, repair and troubleshooting tasks, in and about facilities and manufacturing equipment. **Essential Functions: ** * Diagnose problems and determine the extent of repairs or adjustments needed for equipment. * Maintain, adjust, repair, rebuild and overhaul equipment. * Enters repair orders and keep maintenance records of time spent, materials and parts used and type of work performed in automated system. * Organizes, cleans and maintains workshop area. * Familiar with hands and power tools. **Skills: ** * Able to read and understand maintenance and specification manuals. * Follow oral and written instructions. * Capable of preparing work orders and records of service performed. * Communicate and work effectively with all associates. * Physical dexterity and ability to perform preventive maintenance on complex equipment. * Able to perform all duties of a mechanics helper without supervision. * Standing -Entire shift. * Lifting up to 50 lbs. * Regularly, Noise typical of a production environment- Entire shift. * Working around moving equipment-Regularly. * Working in hot/cold temperatures-Regularly. * Required-Steel Toed Shoes. **Due to onsite safety all candidates must fluent and able to read and write in either English or Spanish. **

Job Description JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION: BRIARWOOD, NY SALARY: $18 - $21 per hour SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: • Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed, • Responsible for all repairs in building and on grounds, • Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages, • Performs HVAC troubleshooting and servicing including cleaning units/replacing filters, • Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary, • Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture, • Repairs any client damage to rooms, furniture or room fixtures, • Responsible for all mechanical work on room turnovers and for work orders for occupied rooms, • Completes preventative maintenance checklists as directed by Supervisor, • May assist as needed with transfers or packing and storing of residents’ belongings, • In the absence of Custodian/Driver, performs all necessary custodial duties, • In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials, • Performs other related duties as assigned EXPERIENCE, EDUCATION AND SPECIAL REQUIREMENTS: High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR fV2pjqJr6Q

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Pay: $20 - $37/hour (commensurate with direct experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump and Motor Mechanic to join our team. Pump and Motor Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump and Motor Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Grounds keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds. The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time)

Job Description JOB DESCRIPTION Job Title: JFK Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: • Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours., • Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc., • Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis., • Forward copies of repair information to Maintenance Control as work is completed., • Perform other duties as directed by the GMM, Maintenance Control or his supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license and previous 747 experience is desirable. Tools required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. • The employee must occasionally lift and/or move more than 50 pounds, to eye level., • Lift 10 pounds with each arm over your head, • Twist, turn with normal strength force, • Climb numerous flights of stairs, • Work on ladders, lifts and in some case high elevations, • Work in a squatted position, • Work in all weather conditions WORK ENVIRONMENT The work environment characteristics describe here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a construction, maintenance setting. The noise level in the work environment is usually loud.

Job Description Line Engineer (Maintenance Technician) Location: Brookville Hotel @ JFK NEW YORK CITY 154-71 Brookville Boulevard | Rosedale, NY 11422 SUMMARY: Keep all equipment in good repair with a minimum of downtime by providing day-to-day maintenance of the hotel under the direction of Engineering Management. Continually work towards and support the improvement of engineering service to both guests and associates. RESPONSIBILITIES: • Report to work on time and in full uniform., • Train and instruct other members of the staff through sharing of knowledge and skills., • Operate as an independent mechanic by analyzing problems, identifying courses of action, and implementing solutions with available resources and to a high degree of quality., • Keep accurate completion and task records in the project files. Set an example of continuous self-development., • Plunging toilets, unclogging drains, repairing all types of hardware, plumbing, and electrical equipment including lamps, air conditioners and cosmetic items., • Clean, lubricate, protect, and otherwise maintain all tools and equipment in the hotel. See that all tools used are returned to the shop and secured in proper storage area., • To protect and otherwise maintain your assigned tool pouch and its tools at the discretion of the Engineering Management., • Monitor systems as necessary, to be fully informed of the system operation and to handle emergencies involving the systems., • Have a working knowledge of fire sprinkler and emergency power systems. Observe and analyze energy and utilities usage in the hotel and on the grounds., • Look for ways to conserve energy and report any ideas to the Engineering Management., • Be available for any emergencies and act in an engineering capacity to protect our guests and associates, and preserve the building and its systems during the emergency., • To act as quickly and responsibly as possible to return the building to its normal operating status. To inform Engineering Management of any such emergencies., • Be aware of all existing departmental Job Safety Analysis and to strive to work in an accident-free manner and to create a safe work environment for others., • Continuously look for conditions which may endanger associates or guests of the hotel and to take immediate action to correct any hazardous conditions found., • Read, log, track, and interpret readings from meters, gauges, and other measuring units., • Maintain a thorough log of each day’s activities and problems that occur and to ensure this information is passed on to other shifts., • Clean all engineering areas as directed by Engineering Management., • Work in a neat and efficient manner, keeping work areas clean and well organized., • Serve as otherwise directed or needed to help maintain the effective and efficient operation of the hotel at the discretion of Engineering Management or the hotel General Manager., • Complete all work assigned in a safe and professional manner. Maintain communications with supervisors to ensure that all needed materials, tools, and supplies are available or on order., • Follow up on any items that may be on back order. Keep supervisor updated on assignments., • Provide training and technical advice to other engineers as needed or requested., • Maintains a working knowledge of all federal, state, and local laws, codes, and regulations., • Maintains a professional image at all times., • Maintains the hotel facility and related equipment in a safe and efficient manner., • Provides for a safe work environment by following all safety and security procedures and rules., • Reads, learns, understands, and refers to the Standard Operating Procedures., • Each associate will be required to follow the rules as found in the M&R Employee Handbook. Performs other duties as assigned by management, of which employee is capable of performing

Pump Mechanic with Growing Industry Leader / $25-$45 an hour depending on Experience / Room for Growth and Great Benefits.This Jobot Job is hosted by: Ken McClure.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.A well-established industrial equipment manuf

Job Description JOB DESCRIPTION JOB TITLE: MAINTENANCE MECHANIC FLSA: NON-EXEMPT DIVISION: SERVICES - FACILITIES REPORTS TO: FACILITY MANAGER LOCATION: BRIARWOOD, NY SALARY: $18 - $21 per hour SUMMARY: The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men’s homeless shelter. Keeps facility in working order using troubleshooting techniques and performing repairs as necessary. Fills in for Custodian/Driver in his/her absence and on designated shifts. Reports to the Lead Mechanic. Scheduled hours of work will vary based on the needs of the facility. Weekend and evening hours are required. Proof of COVID-19 vaccinations required. DUTIES & RESPONSIBILITIES: • Escorts outside contractors, inspectors and other visitors and accepts deliveries as needed, • Responsible for all repairs in building and on grounds, • Troubleshoots and repairs includes light electrical and plumbing (outlets, switches, light fixtures, washers, seats and stems; drain lines; sinks; tubs; and toilets. Clears stoppages, • Performs HVAC troubleshooting and servicing including cleaning units/replacing filters, • Makes repairs to damaged sheetrock and plaster. Sands and paints as necessary, • Repairs/replaces windows, doors, locks and flooring; assembles/repairs/installs room furniture, • Repairs any client damage to rooms, furniture or room fixtures, • Responsible for all mechanical work on room turnovers and for work orders for occupied rooms, • Completes preventative maintenance checklists as directed by Supervisor, • May assist as needed with transfers or packing and storing of residents’ belongings, • In the absence of Custodian/Driver, performs all necessary custodial duties, • In the absence of Custodian/Driver, drives agency vehicles to transport clients and materials High School Diploma or GED with English and Math skills required. Trade/Technical School training a plus. Two (2) years mechanical experience and experience with floor care equipment and procedures necessary. Valid NYS Driver license & clean record required. AGENCY PROFILE & EMPLOYEE EXPECTATIONS Westhab is a prominent community development organization, providing housing and supportive services for more than 10,000 of the most vulnerable members of our community each year. We are staffed by an extraordinary group of hard-working professionals that are fully committed to our mission - Building Communities. Changing Lives. Working at Westhab is not easy. Our expectations for all staff are high. We believe that the people and the communities that we have the privilege to serve deserve our very best every day. We are a results-driven organization that focuses on empowerment and impact. If you want to apply for this opportunity, it should only be because you feel ready for the challenges and expectations that come with joining this kind of team. (EOE) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA): The Occupational Safety and Health Administration (OSHA) ensures safe and healthful working conditions to workers by setting and enforcing standards and by providing training, outreach, education and assistance. Westhab complies with all applicable OSHA standards, rules and regulations in addition to keeping our workplaces free of serious recognized hazards. Powered by JazzHR n9z3BbroDm

Job Description Lead Fleet Mechanic - Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.

FEAM leads the line maintenance industry with advanced aircraft repair capabilities, a wide line station network, and vast approvals for all current and next-generation aircraft including B787 and A350 aircraft. Responsible for servicing, inspecting, and maintaining aircraft, aircraft engines, and a

The Maintenance Mechanic performs all necessary interior and exterior facility repairs including plumbing, electrical, HVAC, carpentry, window, and lock work of a 200 bed men's homeless shelter. Completes preventative maintenance checklists as directed by Supervisor.

Our team is made up of the best plumbers who are dedicated to providing outstanding gas, heating, and plumbing services.

Established plumbing company seeking Boiler/plumbing mechanic with experience in jobbing, trouble shooting, wiring, service and installation of gas boiler and heating systems.

A Manufacturing Mechanic job description typically outlines responsibilities for maintaining and repairing industrial machinery within a production facility, including performing preventative maintenance, troubleshooting malfunctions, replacing worn parts, and ensuring equipment operates efficiently

We are looking for a dependable Service Electrician (Mechanic) to join our team. Assist other electricians as needed. Assign duties and responsibilities to Electrician Helpers.

Maintain workstation clean during the shift and ensure it is clean and organized for the next shift, following all 5S instructions. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religio

Hours per day/week: 8/day 40/week Mon-Fri with a two month flex to Tues-Sat schedule 2nd shift 3 p.Job purpose ensures the packaging of safe and effective product in an efficient manner.Ensures equipment is installed, set up, and maintained properly.Continuously improves production operations.

Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump and Motor Mechanic to join our team. Pump and Motor Mechanic Responsibilities Include :. Pump and Motor Mechanic Qualifications :.

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Flexible schedule, • Opportunity for advancement Location: Jamaica, Queens, NY Compensation: $40 - $50 per hour, based on experience About Us: At Cheese Bus Inc., we are dedicated to providing safe, reliable transportation for schools and organizations. Our fleet requires top-notch maintenance to keep operations running smoothly, and were searching for an experienced Diesel Mechanic to join our team. If you are detail-oriented and committed to safety, wed love to hear from you! Job Overview: Were seeking a skilled Diesel Mechanic with a minimum of 10 years of experience to maintain and repair our school bus fleet. This role involves diagnosing and addressing mechanical and technical issues, performing preventive maintenance, and ensuring that our buses meet safety and regulatory standards. Key Responsibilities: • Conduct inspections and repairs on school buses, focusing on diesel engines., • Diagnose issues with braking systems, engine performance, electrical, and other mechanical components., • Perform routine preventive maintenance, ensuring buses are safe and in optimal running condition., • Keep records of maintenance and repairs., • Maintain compliance with all safety standards and regulations.Qualifications:, • Minimum of 10 years of experience as a Diesel Mechanic, ideally with school buses or similar vehicles., • CDL is Required !, • Expertise in diesel engine repair, troubleshooting, and maintenance., • Familiarity with mechanical, electrical, and electronic systems used in bus fleets., • Strong attention to detail and safety standards., • Ability to work independently and as part of a team.Why Join Us?, • Competitive hourly rate of $40 - $50 per hour, depending on experience., • Opportunity to work in a supportive, team-oriented environment., • A chance to make a real impact on the safety and efficiency of our transportation services.

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Glen Cove, NY area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Employee discounts, • Free uniforms Location: Queens, NY (on-site) Department: Engineering / Operations Reports To: VP Operations Type: Full-time Role Summary Were looking for a hands-on Manufacturing Engineer (3+ years) to drive throughput, quality, and cost reduction across our window manufacturing lines (vinyl/aluminum). Youll own process improvement, tooling/fixtures, new equipment integration, and production supportpartnering closely with Production, Quality, Maintenance, and Sales to keep jobs moving and customers happy. Key Responsibilities • Process Optimization: Map current state, remove bottlenecks, and improve takt/OEE, scrap, and first-pass yield using lean/5S/Kaizen., • Equipment & Tooling: Specify and commission machinery (e.g., double-miter saws, 4-head welders, corner cleaners, hardware stations, IGU line); design jigs/fixtures; create preventive maintenance plans with Maintenance. Assist the mechanic with troubleshooting equipment and minimizing downtime., • Standard Work & Documentation: Build/maintain SOPs, WIs, control plans, PFMEA; train operators and line leads., • Quality Engineering: Analyze defects/returns; implement corrective actions aligned to AAMA/NFRC and relevant ASTM performance standards (air/water/structural/thermal)., • New Product Introduction: Industrialize new profiles/assembliesBOM/routing setup, pilot runs, capability studies, and ramp-to-rate., • Data & Cost: Track line metrics (OEE, downtime, changeover, scrap); partner with Supply Chain on yield, alternative materials, and vendor qualifications., • Safety & Compliance: Engineer guards/ergonomics; support OSHA and electrical/mechanical safety on the floor.Qualifications, • 35+ years in manufacturing/industrial engineering (windows/fenestration, building products, or discrete fabrication strongly preferred)., • BS in Mechanical, Industrial, or Manufacturing Engineering (or equivalent experience)., • Ability to read and write in Chinese, • Proficiency with CAD (SolidWorks/AutoCAD) and MS Office., • Demonstrated lean toolkit (5S, SMED, value-stream mapping, root cause/8D)., • Comfortable on the floordiagnosing issues at machines, with operators, and vendors.Nice to Have, • Experience with IGU processes (spacer/butyl/hot-melt, gas fill), vinyl welding parameters, aluminum fabrication, and hardware installation cells., • Basic statistics/DOE; gauge R familiarity with AAMA/NFRC audits., • Exposure to PLC/HMI basics and machine safety.What Success Looks Like (First 90180 Days), • Launch 5S + Standard Work in one of the three production lines (vinyl production); OEE +10% and scrap 15%., • Improve QC satisfactory results by 30%., • Implement PM checklists on priority machines; unplanned downtime 20%.Compensation & Benefits, • MondayFriday, primarily day shift; occasional off-shift support for trials/startups., • Office adjacent to production; frequent time on the floor with PPE.Equal Opportunity Employer. We value diversity and provide equal employment opportunities to all employees and applicants.

Job DescriptionWe are seeking an experienced and skilled Automotive Technician to join our team. As an Automotive Technician, you will be responsible for diagnosing, repairing, and maintaining various types of vehicles. If you have a passion for automotive technology and enjoy working in a fast-paced environment, we want to hear from you. We are looking in both our Garden City park and Brooklyn locations. Pay will be on experience. If you are a rock star, we want you!! Duties: • Diagnose and repair vehicle issues, such as engine problems, electrical malfunctions, and transmission failures, • Conduct thorough inspections of vehicles to identify any potential issues or safety concerns, • Use diagnostic tools and equipment to accurately diagnose and troubleshoot vehicle problems, • Complete repairs efficiently and effectively, ensuring high-quality workmanship, • Keep accurate records of all repairs and maintenance performed on vehicles, • Provide excellent customer service by addressing customer concerns and answering any questions they may have, • Stay up-to-date with the latest automotive technology advancements and industry trends Requirements: • Proven experience as an Automotive Technician or similar role, • Strong knowledge of automotive systems, including engines, transmissions, brakes, and electrical systems, • Proficient in using diagnostic tools and equipment to identify vehicle problems, • Excellent problem-solving skills with the ability to diagnose complex issues, • Strong attention to detail and accuracy in performing repairs and maintenance tasks, • Ability to work independently with minimal supervision, • Excellent communication skills with the ability to explain technical concepts to non-technical individuals, • Valid driver's license with a clean driving record Skills: • Mechanic, • Transmission service, • Automotive electrical systems, • Powertrain systems, • Service technician``` Job Type: Full-time Benefits: • 401(k), • Employee discountAbility to Commute:, • Brooklyn, NY 11236 (Required)Ability to Relocate:, • Brooklyn, NY 11236: Relocate before starting work (Required)Work Location: In person

Job Description GSE A, B & C MECHANIC (JFK Airport) Starting Pay: $26.80–$36.30/hr. (Based on experience - Full‐Time 40-hours per week) JOB DUTIES: • Service and repair non‐motorized Ground Service Equipment (GSE), • Diagnose and repair gas and diesel engines, hydraulic systems, electrical systems, and air brake systems, • Repair, recondition, and maintain GSE components, • Troubleshoot equipment using electrical and hydraulic schematics and test tools, • Perform scheduled preventative maintenance inspections, • Complete electronic work orders accurately, • Maintain work areas, tools, and equipment in clean and proper condition, • Read and interpret manufacturer documentation, • Communicate effectively with supervisors and team members regarding equipment status, • Work outdoors and in varied weather conditions, • Perform physical tasks such as bending, standing, climbing, and lifting 75 lbs. or more, • Work assigned shifts, including weekends as required REQUIREMENTS: • Ability to meet the physical demands of the role, • Ownership and maintenance of required personal tools and test equipment, • Valid driver’s license (state‐issued), • One to five years of relevant experience or training, • Detail‐oriented and capable of performing technical diagnostic tasks, • Familiarity with Air Brake Adjustment (preferred), • Knowledge of GSE and airport operations (preferred, not required), • Ability to work safely around chemicals, cleaning materials, dust, and noise, • Availability for various shifts, including weekends

Job Description Now Hiring – Diesel Truck Technicians Location: Westbury Jeep Chrysler Dodge Ram** ???? Join Our Winning Team at Westbury Jeep Ram! ???? Westbury Jeep Chrysler Dodge Ram, part of the VIP Automotive Group, is seeking motivated and skilled Diesel Truck Technicians at all levels. Whether you’re an experienced ASE-Certified diesel expert or looking to start your career as an apprentice, we have opportunities to grow with a company that values training, advancement, and recognition. Available Positions & Salary Ranges: * Expert Certified Diesel Technician: $108,000 – $182,000 annually * ASE Certified (A1–A8) * Minimum 7 years’ experience diagnosing and repairing heavy diesel trucks * Proven expertise in diagnosing and repairing Ram 2500, 3500, 4500, 5500, tow trucks, and other fitted applications * Flatbed and tow truck repair specialty a plus * Certified Diesel Technician: $79,000 – $138,000 annually * Non-Certified Truck Technician: $67,000 – $119,000 annually * Apprentice Technician: $45,000 annually Schedule: * Monday – Friday, 8:00 AM – 5:00 PM * No weekends * Night shifts available if interested What We Offer: * Competitive pay plans based on experience & certification * Comprehensive benefits package (medical, dental, vision, 401k) * Paid training and manufacturer certifications * State-of-the-art service facility & tools * Opportunities for advancement within VIP Automotive Group What We’re Looking For: * Diesel/truck technician experience required for certified positions * Strong diagnostic and mechanical skills * Valid driver’s license with clean record * Commitment to teamwork and quality service ???? Take the next step in your automotive career today! Apply now to join one of Long Island’s premier automotive groups. Apply Today!

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description Job description Guardian Bus Company is looking for a skilled Mechanic's A & B, DOT Mechanics, Welders, Body Man and Body Man helpers to assemble, maintain and repair machinery and vehicles. You will be responsible for ensuring functionality and reliability of machines, engines and mechanical systems. An excellent mechanic must have manual dexterity and great attention to detail. They must be able to work with various machines and tools as well as follow all safety precautions. Responsibilities • Build and assemble machines or mechanical components according to requirements, • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues, • Conduct repairs aiming for maximum reliability, • Troubleshoot reported problems and resolve them in a timely manner, • Perform thorough maintenance on machinery, equipment and systems, • Clean and apply lubricants to machinery components, • Replenish fluids and components of engines and machinery, • Provide consultation on correct maintenance and preventative measures to machine or vehicle users, • Undertake other duties as assigned (e.g. repair of hydraulic systems, painting vehicles etc.), • Keep logs of work and report on issues, • All vehicle components including Engine, DriveTrain, Electrical, Suspension, Steering, Exhaust, Air Conditioning ETC., • Perform calls and emergency repairs as needed., • Proven experience as Mechanic, • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • Diesel engines, • Alignment, • Mechanic experience, • Auto body repair, • Driving, • Brakes, • Welding, • A job for which military experienced candidates are encouraged to apply, • A “Fair Chance” job (you or the employer follow Fair Chance hiring practices when performing background checks) Salary: $16.50 - $29.00 per hour Benefits: • Dental insurance, • Health insurance, • Monday to Friday, • Overtime

Job Description We are currently seeking an Auto Mechanic / ADAS Technician to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented

Job Description Correct Job Title: Maintenance Mechanic Hours per day/week: 8/day 40/week Mon-Fri with a two Month flex to Tues-Sat schedule 2nd Shift 3 p.m. 11:45 p.m. Job Purpose Ensures the packaging of safe and effective product in an efficient manner. Ensures equipment is installed, set up, and maintained properly. Continuously improves production operations by performing any actions required to support departmental goals while adhering to safety and quality guidelines while reducing costs. Major Accountabilities Execute preventive maintenance (PM)/(work order) task lists and ensures proper documentation to maintain FDA compliant operation. Supports packaging operations as required, performs setups, trouble shoots, documents activities according to procedures, provides updates to GAMED system (as necessary), repairs packaging equipment, and provides other duties as required while maintaining operational efficiency and in a timeframe required to meet departmental expectations and efficiencies. (I.e, schedule adherence) Disassembles and cleans equipment as needed for efficient and proper line clearance. Operates machines by performing all necessary challenges and checks as per filling Instructions. Documents all maintenance, adjustments and repairs in the appropriate logbooks or documents. Assesses equipment condition and makes recommendations for maintenance activities as required to maintain operational efficiencies and performance. Assists in Engineering studies, Validation, FAT, Qualifications and provides input to equipment related SOPs. Maintains compliance with SOPs, good documentation practices (GDP), training requirements, Company and safety policies (i.e. Lock Out/Tag Out), and current Good Manufacturing Practices (cGMPs). Contributes to the team by supporting other lines and roles as necessary to maintain operational efficiency and volume demands while not sacrificing quality or safety. Maintain effective communication between shifts. Coordinate with other departments as necessary to maintain efficiency of the lines. Adheres to all applicable procedures, cGMPs, company policies, and all other quality or regulatory requirements (OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.). Ensures all work is performed in a safe, effective manner, and in compliance with the appropriate industry and regulatory (FDA, DEA, OSHA) standards, and Departmental, Plant, and Corporate quality and safety Behaviors. Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, employee must be trained under OSHAs HAZWOPER standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above-mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. To perform this job successfully, an individual must have satisfactory visual acuity. Visual acuity screenings may be used to screen applicants. Satisfactory visual acuity means at least 20/20 vision, corrected or uncorrected. Key Performance Indicators Effective preventive maintenance completion of assigned tasks including documentation per preventive maintenance guidelines. Maintain up time efficiencies by setting up and troubleshooting equipment and working effectively with the production/packaging/quality etc. teams. Maintain efficient change over times by executing with excellence and teamwork to expedite line clearance procedures. Support and implement safety initiatives, wearing all personal protective equipment (PPE), and displaying safe work performance according to company safety standards. Neat and organized work habits. Capable of multitasking and prioritization of activities to ensure schedule adherence. Able to work independently and professionally with others while performing any additional actions as necessary to meet departmental and organizational needs as necessary. Job Dimensions Number of associates: NA Impact on the organization: Medium Ideal Background Education : Associates degree or Technical School diploma and or combination of equivalent experience. Conceptual understanding of current Good Manufacturing Practices 21 CFR 211. Experience: Minimum of two years Packaging Equipment Experience. Preferred Documentation experience in food, drug, or cosmetics industry.