Trabajos part time cad en Jersey City, New JerseyCrear alertas

Job Description SCENIC CARPENTER Special Event Fabrication company seeks over hire carpenters to work as needed on various projects. Secaucus, NJ based shop fully equipped. Working under the supervision of the Head of Carpentry Candidates for the Scenic Carpenter position should possess solid carpentry skills, a keen eye for detail, and the ability to interpret artistic and technical drawings. Problem-solving skills and adaptability are crucial, as the work often requires on-the-spot adjustments and creative solutions. Experience with power tools and construction techniques specific to scenic production is highly valued. Being well versed in using a wide range of equipment, carpentry power tools, skills and materials to construct and finish a variety of large- and small-scale scenic items to the highest of standards to tight timescales. ESSENTIAL – REQUIRED SKILLS · Physically capable of undertaking the requirements of the position including lifting, bending, stretching and reaching for long periods of time · Able to work at height on ladders and access platforms · Ability to read and understand CAD Drawings · Ability to read and understand Build Drawings · Ability to work from scale drawings, models, plans, sketches, verbal ideas and references · Ability to create cut lists, material needs, etc. to complete a project · Excellent practical woodwork and resistant material skills · Adhere to safety standards and proper handling of equipment and gear · Ability to organize/prioritize and complete multiple tasks simultaneously on the job · Effective time management skills and the ability to work as part of a team in a busy workshop environment GENERAL SHOP DUTIES · SUPPORT WORK-Keeping shop clean. If not currently assigned a task, cleaning and putting tools away · Accept all other duties as assigned by immediate supervisor/manager -Hourly Position with possibility of overtime when necessary Company DescriptionFounded in 1993, Kadan Productions is a full-service production company that specializes in fashion shows and events. We cater to a wide range of clients and work to create the best experience possible in the events industry. KadaN's facilities include a design/production office adjacent to a 80,000 square foot shop. Our facility is fully equipped for woodworking and cabinetry, metal working, upholstering, and scenic painting/faux finish paint treatments. Our facility also houses an extensive rental stock for your event needs. Your resume (not including a portfolio) should be TWO pages or less. More than 2 page will not be looked at.

Vice President/Infrastructure Engineering Lead US-NY-New York Job ID: 2024-3011 Type: Regular Full-Time of Openings: 1 Category: Civil/Structural Engineering The LiRo Group Overview We have an immediate need for a Vice President/Infrastructure Engineering Lead for our New York City Office which is located in downtown Manhattan or, our Mineola, Long Island Office. Come join our team! We are looking to build services and capabilities through the growth of our key asset - our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Metro Park, NJ. Responsibilities • Lead in the growth and coordination of LiRo-Hill’s Transportation Engineering practice encompassing bridge, highway, rail, and traffic engineering services within the greater NY metropolitan area, • Oversee the performance of a wide range of civil/structural engineering, analysis, planning, and design tasks related to capital improvement projects related to transportation systems and horizontal structures, • Supervise the performance of condition assessments, load ratings, design plans, and specifications for the repair and/or reconstruction of horizontal structures and related facilities including but not limited to: bridges, culverts, transit stations, piers, waterfront structures, etc., • Utilize a broad assortment of technical and project management skills in the execution and oversight of projects that range from small rehabilitations to large scale new construction, • Mentor, train, and develop local engineering and CAD/BIM staff., • Lead the preparation of technical and cost proposals in the pursuit of new work, • Attend local industry and business development functions, • Coordinate staffing needs, project financial performance, and performance reviews for the local staff, • Perform financial projections/updates on a monthly and quarterly basis based on company reporting standards, • Aid in the coordination and development and periodic update of the transportation engineering practice’s design and drafting standards, • Develop and maintain positive relationships with the local transportation agencies, authorities, and city/state level clients Qualifications • Bachelor of Science in Civil/Structural Engineering; Master’s Degree a plus, • 15+ years’ experience in Civil/Structural Engineering, • NY PE required, • Strong leadership qualities and mentor-ship skills, • Ability to supervise, delegate tasks, and provide guidance to technical staff, • Understanding and application of code requirements, • Experience in using various structural analysis software, • Strong written, verbal, and presentation skills, • Ability to multitask and consistently meet deadlines We are committed to your success, and we invest in your growth and development to unlock your full potential. • Competitive Total Compensation Package, • Employee- Only Stock Purchase Plan, • Mentoring programs, • Continuing Education Program, • Employee referral bonus, • Volunteer/Industry association opportunities Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. • We offer a comprehensive benefits package and a positive work environment, • Compensation: Minimum: $195,000; Maximum: $250,000. The range provided is the salary that the Firm in good faith believes at the time of this posting is willing to pay for the advertised position. Exact compensation will be determined based on the individual candidate's qualifications and location. #ID22 #ZR22 PI479a250fe925-37820-35686372

Job DescriptionAbout Us.DroneSense is now part of Versaterm, a global public safety solutions company helping agencies transform how they serve their communities. Together, we are building an ecosystem of intuitive tools designed for public safety agencies! Through purposeful integrations and selective growth, Versaterm is advancing public safety technology to improve workflows, deliver better service, and enable better outcomes. As part of this mission, DroneSense provides a critical drone software platform tailored to the unique needs of public safety. Our comprehensive solution equips First Responders with tools that expand situational awareness, act as a force multiplier, and make drone operations scalable across entire organizations—ultimately leading to more saved lives. Drones are transforming the way First Responders carry out their missions, and DroneSense is driving this evolution within the Versaterm ecosystem. Our Culture.Our team is driven by innovation, expertise, and an unwavering commitment to customer success. Our leaders are experienced engineers, pilots, and entrepreneurs. We’re building a diverse, collaborative team where individuals can bring their full selves to work, have fun, and feel a strong sense of belonging. Here, you’ll roll up your sleeves alongside teammates who care deeply about their craft, their communities, and each other. As we continue to grow and expand our impact, you’ll have the opportunity to contribute to solutions that enhance community safety and shape the future of public safety technology. If you’re passionate about making a meaningful difference, we’d love to hear from you. We are growing rapidly! We’re hiring an experienced Technical Program Manager (TPM) to lead delivery for key customers in New York City. You’ll be the primary program owner for the New York City government and multiple public safety agencies. This includes driving integrations, coordinating on-site engineering support, owning service levels, and ensuring the DroneSense platform delivers reliable, mission-ready value for city stakeholders. This role combines hands-on technical leadership with program management and stakeholder communication. You will provide and coordinate embedded, on-site technical presence for a minimum of 96 on-site hours per month, manage 24/7/365 phone and email support escalation paths, and run quarterly operational audits with city users, turning feedback into prioritized product requirements and process improvements. The ideal candidate has 5-7+ years of experience leading complex, cross-functional programs for enterprise SaaS platforms in mission-critical or public-sector environments. They’ll have demonstrated success partnering with software product and engineering teams, translating operational needs into clear product requirements, understanding and coordinating technical integrations, and aligning product teams with customer needs with crisp stakeholder communication.What would I be doing? • Own the New York City deployment program plan end-to-end. Drive scope, schedule, and success metrics; maintain a single source of truth for deliverables, risks, and decisions., • Provide on-site coverage (96 hrs/month). Build the calendar, align with agency ops tempos, coordinate alternate or additional resources from the DroneSense team to ensure that the right skills are present for New York City priorities., • Establish 24/7/365 support escalation. Coordinate with Customer Support to define playbooks, orchestrate on-call rotations, and personally lead high-severity incident response and communications., • Lead quarterly audits with City administrators and end users. Capture operational feedback, analyze incident and usage data, identify training and process improvements, and publish action plans., • Be the technical glue. Work across city IT teams and DroneSense engineers on topics like SSO/SAML/OIDC, network/VPNs, firewalls, video streaming, device onboarding, and fleet telemetry., • Responsible for overall integration & data governance. Coordinate with DroneSense Product Team for CAD/RMS and other ecosystem integrations; document data flows, retention settings, and compliance needs in partnership with security teams., • Coordinate platform upgrades with the Product Team and the customer, ensuring configuration changes create zero-downtime or provide well-communicated maintenance windows., • Deliver onboarding and refresher training; work with the DroneSense Learning and Development team to create concise quick-start guides and operator checklists tailored to NYC workflows., • Communicate with executive level stakeholders regularly though weekly status, monthly service reviews, and QBRs with KPIs, risks, and mitigation plans., • Pre-plan resource surge support for large operations (parades, marathons, emergencies) and coordinate additional on-site/online resources when requested.What would make me a good candidate for this role?, • 5+ years in technical program management, solutions engineering, or site reliability/customer delivery for mission-critical SaaS or platform deployments., • Strong systems and network fundamentals (VPNs, VLANs, LTE/5G, Wi-Fi, firewalls, identity/SSO) and comfort triaging live video/telemetry issues., • Demonstrated experience running on-call and major incident processes, with crisp stakeholder communications., • Hands-on familiarity with APIs, logs, observability tools, and standard ticketing stacks., • Ability to work on-site in NYC across the five boroughs; occasional nights/weekends/holidays for operations and events., • Ability to pass background checks required for work with public safety agencies., • Excellent written and verbal communication skills., • A low-ego, team-first mentality. You know when to get your hands dirty and when to lead through influence., • Able to execute on objectives with high level direction and minimal supervision.

MRCE is searching for CAD Technicians in NYC and Philadelphia with strong backgrounds in drafting and design and proficiency in using Computer-Aided Design (CAD)software, with specific experience using Bentley Microstation and Revit. The CAD Technician assists geotechnical, structural, and instrumentation engineers with preparing design drawings for boring location plans, geologic subsurface profiles, foundations, waterfront and temporary support structures, etc. Tasks typically include the preparation of technical drawings, details, notes, and schedules. You will work as part of a team or individually based on project needs. To ensure success as a CAD technician, you should have extensive working experience with CAD software, a keen eye for detail, and the ability to work as part of a team. Job Responsibilities • Utilize Computer-Aided Design (CADD) software to create detailed geotechnical and structural drawings for building foundations, transportation, highways and bridges, waterfront, public agencies, and other various market sectors., • Meet with design engineers, project managers, and draftsmen to review project drafting requirements and timely delivery of drawings. Provide regular updates with progress prints for review by the design team., • Generate site plans, boring location plans, geologic sections, embankment profiles, various structural sections, support of excavation design drawings, and foundation design drawings (piles, mats, footings, etc.), and instrumentation and monitoring installation plans using computer-assisted drafting systems (AutoCAD, MicroStation, Revit)., • Locate and identify symbols on topographical surveys to denote geological and geophysical formations., • Prepare maps, site plans, structural layout plans, diagrams, and profiles using cross-sections and surveys to represent elevations, topographical contours, subsurface formations, and structures., • Structural detailing that includes concrete reinforcement, structural steel details, timber shoring, • Correlate, interpret and modify data obtained from topographical surveys., • Develop detailed plans and section drawings., • Print and prepare submittal packages according to required mediums and specifications for reproduction. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. • Navigate job site/field environment as well as an office environment., • Remain either stationary for extended periods (for instance, in a chair or vehicle), or move often (for instance, walking through a job site), depending on project needs., • Lift and carry equipment (up to 50 lbs)., • Position self in a stooping, kneeling, or crouching manner and climb ladders and stairs for reading instruments., • Navigate uneven ground and footing conditions (for example, soil/gravel/ mud footing, riprap and slopes, rugged terrain)., • Work in varying weather conditions (for example, cold, hot, rain, snow)., • Wear gloves, use hands, handle or feel objects, tools, machinery and computers., • Communicate with others; exchange information accurately., • Operate a computer., • Operate specialized equipment and instruments., • Minimum 2 year technical degree in Civil Engineering, Engineering Technology or Applied Science in Drafting & Design., • Knowledge and efficient use of AutoCAD software required. Ability to use AutoCAD for drawing file publishing, sheet sets, page setups, X-refs, text attributes, and layout viewports required., • Autodesk certification is a plus., • 3+ years experience with Bentley Microstation is required., • Knowledge of Revit is required., • Knowledge of project Wise is preferred., • Knowledge of AEC terminology is a plus, • Knowledge of Metric and English systems required., • Knowledge of 3D environment required., • Knowledge of manually drafting drawings when necessary MRCE is an equal opportunity employer and considers all applicants without regard to race, color, religion, national origin, ancestry, citizenship, gender, pregnancy, age, physical or mental disability, genetic information, service in the uniformed services, or any other basis protected by federal, state or local law. Base Salary Range: $60,000 - $70,000. Actual compensation may vary based on related work experience, market conditions, education/training, certifications and credentials. This position is eligible for overtime and participation in the firm's annual bonus and performance review program. Bonuses are discretionary and based on individual job performance. Job Type: Full-time Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • AutoCAD: 1 year (Required), • BIM (building information modeling): 1 year (Preferred), • MicroStation: 1 year (Preferred)

Reports to: President and Director of Sales Status: Exempt About the Role Zelouf International is seeking a Lead Print Designer/Merchandiser to drive the creative vision, development, and customer engagement of our fashion fabric collections and CAD initiatives. This role blends creativity, market awareness, and merchandising strategy with hands-on design execution. The ideal candidate is a front-facing creative leader—someone who enjoys meeting directly with customers’ garment designers, leading design discussions, and translating ideas into successful fabric collections. This is not a behind-the-scenes design job. It’s a proactive, highly collaborative role that connects creative design, customer development, and operational execution across departments and global partners. Key Responsibilities Customer Collaboration & Market Presence • Act as the primary creative interface with customers—attending appointments, market meetings, and presentations to understand their needs and develop custom print concepts., • Meet regularly with customers’ design teams to present trends, print stories, and new fabric developments; collaborate closely to bring design concepts to life., • Lead the CAD design department and provide direction to a Print Coordinator/Colorist who supports print development, coloration, and execution across multiple accounts., • Mentor and guide CAD artists, ensuring creativity, accuracy, and commercial relevance in every project., • Take a hands-on approach—actively designing, recoloring, editing artwork, and participating in all stages of development., • Source and purchase new print artwork; integrate new designs into Zelouf’s owned library., • Maintain and grow Zelouf’s extensive print archive and digital design library., • Partner with the operations department to ensure all new artworks and original creations are properly documented, registered, and copyrighted with the U.S. Copyright Office in Washington, D.C., • Work closely with the solid and novelty design teams to ensure print direction complements and enhances broader fabric development, creating cohesive, trend-right seasonal collections., • Partner with the New York CAD team, New Jersey digital printing division, and China office to coordinate artwork, color approvals, and production timelines., • Collaborate with the sales team to align creative direction with account strategies and customer expectations., • Conduct regular market research and store visits to monitor emerging trends in print, color, and fabric., • Stay current through trade shows, design services, and global market reports, translating insights into actionable design direction. Qualifications • Minimum 8 years of experience in fabric or textile print design and merchandising within women’s fashion, fabric wholesale, or textile manufacturing., • Proven success in customer-facing creative roles—meeting with designers, presenting, developing, and selling print concepts., • Experience across department store and moderate/off-price markets (e.g., Macy’s, Dillard’s, Nordstrom, TJ Maxx, Burlington, Ross)., • Ability to build trend-based print and fabric collections that balance creativity with commercial results., • Strong proficiency in Adobe Photoshop, Illustrator, and textile CAD systems; familiarity with digital printing and base fabrics., • Highly organized with a focus on design tracking, archiving, and copyright management., • Strong communication and interpersonal skills; collaborative, adaptable, and professional., • A motivated self-starter who leads by example and contributes directly to creative execution. Ideal Candidate Profile This is a hands-on creative leadership position for a designer who thrives on collaboration and customer engagement. The right candidate will balance artistry with business awareness, lead creative development while staying deeply involved in execution, and inspire both customers and colleagues. They should take pride in seeing their fabrics in the marketplace, maintaining Zelouf’s creative standards, and driving the continued growth of our print and fabric collections. The following benefits are available to all full-time employees: Full Time employees working on average 30 hours or more per week. · Insperity Group Health Plan · The Insperity Welfare Benefits Plan · Dental and Vision Insurance (100% employee paid) · Basic Life and AD&D Insurance (100% employer paid) · Voluntary Life, AD&D and Disability insurance (100% employee paid) · The Insperity health Savings Account (HSA) Program · Insperity Care Flexible Spending Account (FSA) Plan · The Insperity Adoption Assistance Program o Available to all full-time employees with at least 180 days of continues service The following benefits are available to all employees (Part Time and Full Time employees) · The Insperity Employee Assistance Program (EAP) · The Insperity Commuter Benefit Program · Insperity Training and Development · MarketPlace online employee discount Zelouf International provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Jr. Engineer / Great Place To Work! This Jobot Job is hosted by: Alex Console Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume. Salary: $70,000 - $74,000 per year A bit about us: East Coast millwork firm blends old-world craftsmanship with modern technology to deliver high-end architectural interiors across commercial, institutional, and public spaces—backed by a commitment to quality, sustainability, and client-focused service. Why join us? Compensation is commensurate with experience. We will provide exceptional support to help you expand your skills and practice. Additionally, we provide excellent health and wellness benefits. Job Details Job Details: Our organization is searching for a dynamic and talented Permanent Jr. Engineer - AutoCAD to join our innovative team in Queens, NY Onsite. This is an exciting opportunity for a professional with a strong background in CAD drafting, Millwork Drafting, Project Management, and AutoCAD. The successful candidate will be a vital part of our engineering team, working on a variety of projects, from conceptual design to implementation and manufacturing. This position requires a minimum of 2 years of experience in a similar role. Responsibilities: 1. Utilize AutoCAD to create detailed 2D and 3D models for various engineering projects., 2. Collaborate with the engineering team to develop designs and implement modifications., 3. Assist in project management activities, including planning, scheduling, and coordinating work tasks., 4. Conduct millwork drafting, including the creation of detailed shop drawings for manufacturing., 5. Review and analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting designs and the procedures and instructions to be followed., 6. Monitor the progress of projects, ensuring that all tasks are completed on time and within the specified budget., 7. Participate in quality assurance processes, ensuring designs meet the required standards and specifications., 8. Provide technical support and guidance to other team members., 9. Maintain up-to-date knowledge of industry trends, developments, and changes in regulations. Qualifications: 1. A bachelor's degree in Engineering, or a related field., 2. A minimum of 2 years of experience in CAD drafting, millwork drafting, project management, and AutoCAD., 3. Proficiency in AutoCAD and other relevant software., 4. Strong knowledge of drafting principles, techniques, and procedures., 5. Excellent project management skills, with the ability to prioritize tasks and work on multiple projects simultaneously., 6. Strong problem-solving skills, with the ability to identify and resolve design issues effectively and efficiently., 7. Excellent communication skills, with the ability to explain complex concepts in a clear and concise manner., 8. Strong attention to detail, with the ability to produce accurate and high-quality work., 9. Ability to work effectively in a team, as well as independently., 10. A strong understanding of engineering principles and manufacturing processes., 11. Ability to adapt to changes in project requirements and work under pressure., 12. Familiarity with industry regulations and standards. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

About the job Alyssa Kristin is looking for a Bridal Designer (Bridal/Luxury Evening Wear) to join our development team and work closely with our Lead Designer and Creative Director. This individual will be responsible for conceptualizing and executing fresh, refined concepts to life for both our main collection, luxury line and custom gowns. This role can be based in Chicago or New York, and we’re open to full-time, part-time, or freelance arrangements depending on experience and availability. Responsibilities include: • Design and develop pieces for the main collections and custom clients that reflect the brand’s creative vision and craftsmanship standards, • Create original sketches, technical flats, patterns, prototypes, and final samples, • Partner with the Creative Director and Lead Designer on research, design exploration, and sample development through draping, patternmaking, and textile experimentation, • Collaborate with the team on fabric sourcing and custom material development, liaising directly with fabric and embroidery mills as needed, • Review and prepare fit samples by comparing them against patterns, tech packs, and previous notes to ensure accurate corrections, • Participate in fittings, ensuring each design’s fit, construction, and detailing are realized as intended throughout the development and production process, • Develop precise and comprehensive tech packs to maintain consistency with specifications and production requirements, • Maintain updated tech packs, including BOMs, construction notes, and any additional development details, • Oversee the transition from post-development to pre-production, collaborating with cross-functional teams to ensure designs are executed seamlessly, on time, and within budget, • Uphold exceptional attention to detail and quality at every stage - from first concept through final sample We’d love to meet you if you have • Bachelor’s degree in Fashion Design or Certification in Apparel Manufacturing, Design, Patternmaking, or equivalent, • Strong corsetry and/or draping skills - experience creating structured interiors, molded bodices, or sculptural silhouettes is a major plus, • Strong technical skills in patternmaking, draping, garment construction, and grading, • Ability to sketch and effectively illustrate design ideas, • Optitex / Gerber / CAD experience a plus, • Photoshop or Procreate proficiency a plus, • Excellent organizational and time management skills Alyssa Kristin is a modern bridal house rooted in elevated minimalism, intentional design, and sculptural simplicity. Proudly designed and produced in the USA, we are expanding our flagship presence, debuting a new luxury line, and growing globally - and we’re looking for a Designer to help us shape the next chapter of our story. To apply: Complete application form: Job type: Full-time, Part-time, or Freelance (Flexible) Compensation: Competitive, based on experience and arrangement (full-time, part-time, or freelance) Benefits (full-time only): • 401k, • Medical, dental, vision insurance, • Paid time off

Job DescriptionJoin Our Team as a Clinical Data Abstractor at Carta Healthcare! Company: Carta Healthcare Inc. Position: Flexible Schedule Clinical Data Abstractor Location: 100% Remote (Non-Benefit Position) Are you experienced in clinical data abstraction? Carta Healthcare Inc. is seeking talented individuals to join our growing team as Part-Time Clinical Data Abstractors! Join our team at Carta Healthcare, where we offer opportunities for experienced clinical data abstractors. We offer a flexible work schedule that allows for a balanced work-life experience. About Us: At Carta Healthcare, we are revolutionizing the way healthcare data is managed and used with innovative software solutions. Position Overview: As a Part-Time Clinical Data Abstractor, you will be responsible for abstracting and coding patient information from medical records to meet the requirements of various target registries. What We're Looking For: • Minimum of 1 year of recent clinical data abstraction experience, • Proficiency with EMR systems, • Maintain a 98% or higher IRR score, • Previous remote work experience preferred, • Available for a minimum of 60 abstraction hours monthlyWhy Join Us?, • Flexible part-time hours non-benefit - W2 employee, • Hourly rate $28-$32, • 100% remote Carta Healthcare is dedicated to building a diverse and inclusive company because we serve health systems across the country; we've seen how our product and impact are strengthened the more we reflect that diversity. In addition, we have found and strongly believe that diverse teams are higher-performing, and we embrace the varied perspectives that our team members share with each other. As such, we are an Equal Opportunity Employer. #LI-Remote #BI-Remote

Job Description Redefine Oral Surgery Excellence with Concerned Dental Care of the Bronx Are you an Oral Surgeon driven by precision, leadership, and compassion? Concerned Dental Care (CDC) of the Bronx - a modern, multi-specialty dental group in the Northeast - is seeking a talented Oral Surgeon to become a clinical leader in our Bronx practice. This is an outstanding opportunity to work with a well-established patient base, access cutting-edge technology, and shape the future of oral surgery care in your community. We offer both full-time and part-time schedules to accommodate your professional ambitions and lifestyle. About Our Practice • Located at 55 E. Mosholu Parkway North, Bronx, NY 10467, • Fully equipped with modern surgical suites, digital charting, CBCT imaging, and CEREC/CAD-CAM, • Active Medicaid provider offering consistent, high-volume surgical cases, • Family-friendly working environment with strong community ties, • Positive reputation: 4.9-star reviews and ongoing patient growth What You’ll Do • Deliver an extensive range of oral surgery treatments - from simple and surgical extractions to implant placement and advanced bone/graft procedures - with precision and empathy, • Collaborate with referring dentists, in-house specialists, and the clinical team to design and execute comprehensive treatment plans, • Ensure smooth case flow by leveraging digital charting systems and efficient pre-/post-operative protocols, • Maintain high standards of patient care and safety, with strict compliance to HIPAA and OSHA standards, • Support ongoing quality initiatives and bring clinical innovation to our practice What Makes This Role Exceptional • Flexibility & Work-Life Balance: Tailor your schedule with full-time or part-time options - work the number of days you choose, • Clinical Autonomy + Support: Grow within a dentist-led organization that values independent judgment and teamwork, • Professional Growth: Access CE credits, mentorship, and long-term partnership or equity opportunities, • Outstanding Compensation: 40-50% of collections at a 98% collection rate, plus a comprehensive benefits package (health, dental, vision, 401K) Preferred Qualifications • DDS or DMD degree and board certification in Oral and Maxillofacial Surgery, • Active NYS oral surgery license and Medicaid credentialing experience, • Expertise in CBCT diagnostics, implantology, and bone grafting, • Strong communication skills, with the ability to connect with patients and providers Why Move to the Bronx? • Vibrant, culturally rich borough with diverse food, arts, and green spaces, • Strong public transportation and easy access to Manhattan, • Affordable living compared to other NYC neighborhoods Unveil a career where your surgical prowess isn't just utilized - it's celebrated. Align with us, transform lives one surgical procedure at a time, and etch your name as a luminary in the world of oral surgery. Concerned Dental Care awaits your unparalleled expertise. Affinity Dental Management is an equal opportunity employer committed to a diverse and inclusive workforce. We encourage qualified candidates from all backgrounds to apply and will consider all qualified applicants for employment without regard to race, color, religion, sex (including gender identity, sexual orientation, and pregnancy), national origin, age, disability, or genetic information or other characteristics protected by law. All candidates' employment is contingent on successful completion of a background check, reference check, and employment verification. {Oral and Maxillofacial Surgeon, Oral Surgeon, Dental Surgeon, Maxillofacial Surgeon, Dental Specialist in Oral Surgery, Oral Surgical Practitioner, Doctor of Dental Surgery, Facial Surgeon}

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionA World-Changing Company Palantir builds the world’s leading software for data-driven decisions and operations. By bringing the right data to the people who need it, our platforms empower our partners to develop lifesaving drugs, forecast supply chain disruptions, locate missing children, and more. The Role Palantir Foundry is an end-to-end platform for data-driven decision-making, and as a 3D Software Engineer, you will play a pivotal role in extending its capabilities to handle advanced 3D visualization and geospatial workflows. We're transforming the way organizations integrate and interact with complex 3D data—such as gaussian splats, point clouds, BIM files, CAD models, and schematics—so they can build reliable, mission-critical applications atop a unified foundation. In this role, you will join a specialized team within Foundry focused on 3D tools and visualization, working closely with industries like Architecture, Construction, Automotive, Aerospace, Space, Oil and Gas, Mining, and Utilities. Our customers use Foundry to visualize and analyze 3D models and geospatial data to support their daily operations, across infrastructure planning, asset management, digital twins for industrial facilities, and real-time monitoring of complex engineering systems. As a 3D Software Engineer, you will be responsible for designing and developing cutting-edge tools that allow thousands of users to interact with 3D data in intuitive and powerful ways. You will develop new end-to-end approaches for displaying 3D geometry—from offline pre-processing of large datasets to novel realtime approaches on the GPU—and build applications that use them for visualization and analysis. Your work will empower customers to build sophisticated applications, such as interactive dashboards for construction sites, geospatial analysis tools for mining operations, or simulation environments for aerospace design. You may spend one day collaborating with customers in the construction sector to understand their needs when visualizing BIM files, identify gaps in their current tools, and prototype solutions. The next day, you might brainstorm with teammates on optimizing shader performance for rendering large-scale point clouds or voxel models in real time, or work with backend engineers to define APIs and schemas that back these workflows. You’ll regularly face sophisticated technical problems, requiring you to scope out the solution design and find an incremental path to ship new features. As part of this, you will own APIs and schemas that power your frontend code, or work with other backend engineers in developing them together. Below are some examples of the types of product work you’d get to do in this role: • 3D Visualization Tools: Build interactive tools for rendering and manipulating 3D models, such as CAD and BIM files, enabling architects and engineers to explore designs in real time. • Geospatial Workflows: Develop features for visualizing and analyzing geospatial data like gaussian splats, point clouds, and voxel models, supporting use cases in utilities, mining, oil and gas exploration, and urban planning. • Shader Development: Write and optimize custom shaders to enhance the performance and visual fidelity of renderings for applications in aerospace and automotive design. • Digital Twins: Create interfaces for integrating 3D schematics and real-time sensor data, powering digital twin applications for utilities and industrial facilities. • Performance Optimization: Solve complex challenges related to rendering large-scale 3D datasets, ensuring smooth performance for end-users in high-stakes environments like space mission planning. Frontline Foundry Software Engineers may be offered the opportunity to Frontline, an exclusive program unlike any other. This unique, short-term assignment involves being embedded with customers, allowing you to work directly with users and gain firsthand insight into how our products are used and the challenges our customers face. Unlike traditional engineering roles, Frontline immerses you in complex, ambiguous problems, empowering you to deliver impactful solutions across some of the world’s most important industries and institutions. Some of our most successful products were built on the factory floor, addressing real-world problems for the world's most important institutions. These products were developed by some of our most successful product engineers, who began their careers in roles aligned with Frontline responsibilities, gaining a deep understanding of both our technology and our customers. Frontliners operate across a broad spectrum of responsibilities, much like a startup CTO. They work in small teams to own the end-to-end execution of high-stakes projects. This spectrum ranges from discussing architecture and building custom web apps to conducting workshops with users and strategizing with customer executives. No two days are alike, as each day is diverse and impactful. By witnessing how customers engage with Foundry and experiencing these pain points firsthand, you’ll gain unique insights that feed directly back into our development process, helping to refine and enhance our products.Core Responsibilities • Creating 3D tools and environments for visualizing and analyzing a variety of data types, • Collaborate with industry experts to create tailored visualization solutions for construction and manufacturing., • Building products which aim to make technical concepts accessible for non-technical users, • Working as part of a community of engineers building shared frontend tooling to enable teams across Foundry, • Designing and building for high-scale data intensive APIsTechnologies We Use, • Typescript, React, and GQL are central to our frontend development., • Three.js, WebGL, GLSL, and similar technologies for rendering and manipulating 3D models and geospatial data., • Blueprint as a re-usable front end component library., • A combination of open-source and internal technologies that suit the problems at hand., • Industry-standard build tooling, including Gradle, Webpack, GitHub, and CircleCI.What We Value, • Passion for improving user workflows by building 3D interfaces that enable users to solve complex problems, such as visualizing infrastructure or analyzing geospatial data, while maintaining engineering quality., • Ability to work collaboratively in teams of technical and non-technical individuals and understand how technical decisions impact the people who will use what you're building., • Skill and comfort working in a constantly evolving environment with dynamic objectives and iteration with users., • Experience brainstorming and iterating with product designers., • Experience building high-quality software in a fast-paced CI/CD development environment., • Proven ability to learn continuously, work independently, and make decisions with minimal supervision., • Ability to learn new technology and concepts, even without in-depth experience., • Active US Security clearance, or eligibility and willingness to obtain a US Security clearance is beneficial, but not necessary.What We Require, • 2+ years of software engineering experience, with a focus on graphics, visualization, or geospatial data processing., • Strong frontend coding skills used to write clean, effective, and performant code, regardless of framework., • Familiarity with concepts common to 3D data transmission and rendering, including data structures, rendering frameworks (e.g. three.js, deck.gl), GLSL or similar languages for shader programming, linear algebra., • Proficiency with programming languages such as JavaScript/TypeScript or other similar languages.

Job DescriptionA boutique NYC architectural & interior design practice seeks a self-motivated, creative INTERMEDIATE INTERIOR DESIGNER / ARCHITECT. The successful candidate will have a history of 5 years min. experience preferably related to high-end corporate interiors. INTERMEDIATE DESIGNER We are looking for creative thinkers who are well organized with a positive teamwork mentality. This candidate must understand the importance of working well with others in every aspect of the design process. Candidates will be working intimately with Principals of the company and other members of the interior design and architectural team to plan, design, prepare construction sets & client presentation materials that meet the aesthetic of each unique project requirements. Prior experience with all FF&E matters along with schematic design, furniture specification & space planning. Skills required in CAD, Adobe Suite, Bluebeam, Sketchup and Revit a bonus. Duties also include furniture specification, schematic design, preparation of presentation materials for in-house and on-site meetings. A strong sense of design aesthetic, with a willingness to present and be receptive to clients feedback is ideal for our office culture. Essential Duties and Qualifications: • Working with the firm Principals and other members of the interiors and architectural design teams to plan, design, prepare design documents & client presentation materials that meet the aesthetic of each unique projects requirements, • Thorough knowledge of furniture specification, • Working with furniture and finish vendors for product sourcing, • Developing finish packages and preparation of presentation materials for Client meetings., • Knowledge of project management principles, practices, and techniques., • Understanding of finishes and applications., • Resourceful and ability and willingness to find creative solutionsTo Join Us, Candidate Will Have, • Min. 5 years of related professional experience preferably related to corporate interiors, • Collaborative and professional work ethic and outstanding interpersonal and communication skills (verbal and written) with the ability to successfully communicate with architects, Clients, vendors, and fellow team members, • Strong sense of design aesthetic, with a willingness to present and be receptive to team and client feedback, • Must have strong organizational and time management skills and the ability to effectively meet deadlines Applicants must be eligible to work in the US in order to be considered. Verderame | Cale architecture pllc is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, genetic information, sexual orientation, status as a protected veteran or status as a qualified individual with a disability, or any other characteristic protected by applicable Federal, State or Local law.

Job Description ON BOARD EXPERIENTIAL On Board Experiential (OBE) is an award-winning, full-service, experience-led agency that creates meaningful brand experiences worldwide. We work out of our homes and physical offices in San Francisco, Los Angeles, and NYC, or wherever our adventures take us! Our clients include Nike, Meta, JPMorgan Chase, The Infatuation, Stripe, and OpenAI, to name a few. We know, "Cool, cool, but what's it like to work at OBE?" We thought you'd never ask. Event Marketer has recognized OBE as one of the best places to work in events and well, we couldn't agree more. The most important part of our business is our people. They are hardworking, brave and make magic happen on the regular. But under each majestic exterior is a human deserving of a healthy work-life balance. That's why we believe in recovery days, happy hours, friendly but competitive fitness challenges and company offsites. We conduct open meetings to facilitate discussions that heal, inspire, and bring us closer. We encourage each other to bring our whole selves to work. We want to hear about your lived experiences and unique perspectives. We don't just want you to be unapologetically you: it's part of the job description. Summary of Position The Technical Director has both management and implementation responsibilities across all of the company's projects. Along with the Senior Technical Director, this role will establish initiatives to keep the technical production capabilities at OBE ahead of the industry curve. In partnership with our Senior Technical Director, and other cross functional teams, this person will ensure OBE continues to deliver the highest quality experiences through the implementation and management of all technologies (Audio/visual, lighting, immersive (AI, VR, MR, etc), custom builds, staging and all related elements). Essential Job Functions Technical Direction: Strategy and Concept Development (10%) • Identify key technologies and resources available to OBE in order to provide the highest quality technical production options for client projects., • Partner with key stakeholders (internal and external) to define strategy and resources needed for specific events. This includes vetting numerous concepts, vendor outreach, specific and targeted research, as well as advanced feasibility related work related to next level technical integrations, • Simultaneously advance technical workstreams across multiple projects., • Workstreams include details such as to-scale .DWG drawing and modeling, advanced planning with vendors and partners on technical production elements. This includes budgeting, pricing, testing (incl final phase testing) and other associated best practices., • Coordinate with production team to ensure all appropriate and approved technical production resources for projects are acquired, installed, and managed throughout all project stages., • Hire and manage production teams, both internal and external, to properly execute OBE's technical SOW on projects at the highest level possible and in keeping with both client and OBE desired outcomes., • Work with 3rd party vendors to define and deliver services for execution and activation of events., • Develop and manage Technical Directing related budgets for assigned events., • Submit budgets to producers for inclusion in overall event/project budgets., • Ensure invoices for all elements are properly approved and processed on a timely basis., • Negotiate any budget to actual variances with vendors., • Expense reports and timesheets submission. Desired Skills and Experience Education/Experience EDUCATION • Minimum 8 years of experience managing A/V, lighting technologies, custom builds and related strategies., • Strong track record of managing state-of-the-art technologies for all audio/visual fields: Audio, Lighting, Video, Rigging, Effects, and other technical production related devices and resources., • An understanding of XR (AR, VR, MR), projection mapping, LED, spatial audio, and real-time rendering engines such as Unreal or Unity., • Proven and strong understanding of production labor. Both union and non-union, safety practices, labor rules. familiar with current CBA's., • Proven and strong experience drawing in Auto CAD and/or Vectorworks at the advanced level., • Proven history of custom builds in the areas of power, staging, trussing and other related infrastructure., • Experience in an agency environment, preferably experiential marketing, is required. Essential Knowledge, Skills, and Abilities • Very strong client/customer service experience and focus., • Excellent planning, organizational and time-management skills., • Ability to multi-task, manage priorities and commitments, and meet deadlines., • Must be able to work in a collaborative manner both internally, and with clients., • Ability to manage projects/events/races within budget., • Excellent judgment with the ability to pro-actively identify issues/obstacles and effectively create solutions., • Ability to work independently as well as within teams., • Extremely strong and current vendor relationships and experience with the competitive bidding process., • Very strong work ethic and ability to thrive and enjoy a fast-paced dynamic work environment., • Excellent computer skills that include Microsoft Office (including PowerPoint and Access), MS Project or other project management tools are a plus. Other Qualities and Skills • Natural curiosity—the drive to always be learning and growing, professionally and personally., • High energy and flexibility in working non-traditional hours as needed (some nights and weekends as deadlines dictate)., • Willingness to work a hybrid schedule of at least 2 days in office (up to 4 days as needed) and travel up to 50% of the time. Compensation Compensation Range: $115,000 - $165,000 annually. This is the pay range OBE believes it will pay for this position at the time of this posting. Consistent with applicable law, compensation will be determined based on level of experience, relevant skills, professional certifications, market pay, and demand for the role. OBE reserves the right to modify this pay range at any time. For this role, Benefits include: medical/dental/vision insurance, employer paid basic life and personal accident insurance. Also included: Annual Profit Sharing/Bonus Plan based on the company's performance and your individual performance, 401(k), Healthcare Flexible Spending Account, Dependent Care Flexible Spending Account, PTO, STD/LTD insurance benefits. On Board Experiential is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Job Description CAD Production Drafter / Engineer – Custom Cabinetry Newark, NJ (Onsite – Full Time) $80,000–$110,000 Description As a CAD Production Drafter / Engineer, you will be responsible for producing precise technical drawings, 3D models, part breakdowns, and machine-ready files for fabrication. You'll serve as the technical bridge between the design team and the production floor—working closely with project managers, CNC operators, and cabinet makers to bring complex custom designs into production. This role requires strong CAD proficiency, understanding of cabinet construction methods, and the ability to translate design intent into efficient, buildable components. Requirements • 2–5 years of experience in CAD drafting, millwork engineering, or production design, • Strong command of 2D/3D CAD software (AutoCAD or similar), • Ability to produce accurate, buildable shop drawings from architectural plans, field measurements, or concept sketches, • Understanding of cabinet construction, woodworking techniques, and joinery, • Familiarity with CNC manufacturing, nesting, and panel processing workflows, • Excellent communication and cross-functional collaboration skills, • Knowledge of hardware specification and installation (BLUM, Häfele, etc.), • Strong problem-solving skills and attention to detail Responsibilities Technical Drawing & Engineering • Prepare detailed shop drawings, part lists, and engineering documents from architectural or conceptual inputs, • Create and manage CNC-ready files, including DXF, nested panel layouts, and toolpath-ready outputs, • Translate complex custom cabinetry and millwork designs into accurate, buildable components Coordination & Collaboration • Work closely with project managers, production leads, and cabinet makers to ensure feasibility and accuracy, • Participate in design reviews and resolve technical issues during fabrication Documentation & Standards • Maintain drawing and part libraries for efficient reuse, • Support standardization of construction methods and documentation processes, • Specify and document hardware, materials, and accessories using industry-standard systems Preferred Skills (Not Required) • Experience with CAM or nesting software for CNC programming, • Familiarity with architectural drawing review, markups, and redlines, • Experience on high-end residential or commercial custom cabinetry projects, • Hands-on experience in fabrication or cabinet installation Must-Haves • Proven CAD drafting and millwork engineering experience, • Deep understanding of cabinetry construction and CNC workflows, • Ability to communicate and coordinate effectively between design and production teams Final Invitation to Apply If you're passionate about precision and take pride in translating design concepts into production-ready work, this is an exciting opportunity to grow within a quality-driven, fast-paced environment. Email Resume: Apply Online: Refer a friend, get up to $1000!

Job DescriptionJob Title: Junior Engineer – Digital Signage & Experiential Systems Location: Innovation Lab, Duggal Visual Solutions, Brooklyn, NY Employment Type: Full-time, In-Person About Duggal Visual Solutions Duggal Visual Solutions is a global leader in visual innovation, blending creativity, technology, and craftsmanship to deliver extraordinary experiences for the world’s most iconic brands. From interactive digital environments to large-scale architectural installations, our Brooklyn-based Innovation Lab serves as the hub where design and engineering meet production. We are a small, dynamic team within a larger creative organization, working at the intersection of design, fabrication, and technology. Our environment rewards curiosity, collaboration, and adaptability—ideal for individuals who thrive on variety and hands-on problem solving. Role Overview The Junior Engineer – Digital Signage & Experiential Systems supports the engineering, documentation, and integration of advanced digital signage and AV installations. This role combines hands-on CAD drafting with system design and field coordination, working closely with project managers, designers, and fabrication partners to translate creative concepts into technical realities. The ideal candidate is a detail-oriented, versatile engineer with 1–3 years of experience in the AV or digital signage industry—someone equally comfortable producing drawings at their desk or joining a field team to assist with on-site installation and servicing. Key Responsibilities Technical Design & Drafting * Produce detailed 2D and 3D CAD drawings for digital signage, AV, and experiential installations. * Develop system schematics, mounting details, cable paths, and device layouts in AutoCAD and Revit. * Interpret architectural, structural, and millwork drawings to ensure accurate system integration. * Maintain drawing standards, version control, and documentation for multiple active projects. System Engineering & Field Support * Assist senior engineers with system design, including displays, media players, control systems, and networking. * Support documentation for equipment lists, wiring diagrams, and rack layouts. * Participate in on-site installation, servicing, and system testing as project needs require. * Collaborate with project managers, designers, and technicians during fabrication and integration. Cross-Team Coordination * Interface with millworkers, architects, and other trades to align digital systems with environmental design intent. * Participate in design reviews, coordinate markups, and integrate revisions. * Support as-built documentation and field verification after installations. Qualifications Required: * 1–3 years of experience in CAD drafting or engineering for AV, digital signage, or experiential projects. * Strong proficiency in AutoCAD and Revit for drafting and system documentation. * Familiarity with digital signage systems design, display integration, and signal flow. * Ability to read and interpret architectural and construction drawings. * Strong organizational and communication skills. * Comfortable working both at a desk and in the field, depending on project needs. * Hands-on, flexible, and motivated to learn across disciplines. Preferred: * Experience with an AV consultancy or digital signage integrator. * Understanding of IT/networking fundamentals related to AV systems. * Familiarity with fabrication methods, materials, and architectural coordination. * AVIXA CTS certification or progress toward certification. Why Join Duggal? At Duggal, we push the boundaries of design and technology to create spaces that captivate and inspire. Our Innovation Lab brings together engineers, designers, and technologists to build next-generation digital environments. You’ll be part of a tight-knit, collaborative team that values versatility, precision, and hands-on creativity—where no two days or projects are the same. Join us and help bring visionary digital experiences to life for some of the world’s most exciting brands.

At Star Children's Dress Co., we believe every child deserves to shine. As a leading name in the children's apparel industry, we create stylish, age-appropriate, and trend-forward clothing that celebrates individuality and imagination. Our Juniors division, Dear Moon, is rapidly expanding, and we’re looking for a passionate, creative, and detail-oriented Assistant Fashion Designer for Club to join our dynamic design team. Position Summary: As the Associate Fashion Designer for our Juniors line, you will assist in the design and development of our trend-driven, youthful dress collections. You will work closely with the Senior Designer, Merchandising, and Production teams to bring fresh, fun, and fashionable looks to life for our growing tween and junior customer base. Key Responsibilities: • Support the design process from concept to final sample for the Juniors line, • Assist in creating seasonal trend boards, color stories, and mood inspiration, • Sketch designs by hand and/or using CAD tools (e.g., Illustrator, Photoshop), • Select and develop prints, patterns, trims, and fabrications suited for Juniors Club dresses, • Partner with technical design to ensure fit and quality standards are met, • Track sample development and manage design documentation (tech packs, line sheets, etc.), • Stay current on market trends, competitive analysis, and customer preferences, • Participate in fittings and design meetings to ensure vision is executed accurately, • Maintain organization of samples, swatches, and design files Qualifications: • Bachelor’s degree in Fashion Design or related field, • 1–2 years of fashion design experience, preferably in Juniors Club apparel, • Proficient in Adobe Creative Suite (Illustrator, Photoshop); knowledge of PLM systems a plus, • Strong understanding of garment construction, fit, and fabric, • Ability to thrive in a fast-paced, collaborative environment, • Passion for juniors’ fashion, trends, and the youthful apparel market, • Excellent communication, time management, and organizational skills Why Join Us? • Salary $50k-$60k BoE, • Work in a fun, creative, and collaborative environment, • Opportunity to be part of a growing brand with national retail exposure, • Competitive salary and benefits package, • Platinum Healthcare Plan, Delta Dental Insurance, • Free Life Insurance for Term of employment, • 401k, FSA, Transit checks available, • Free Full service Gym, including locker rooms, showers, and towel service, • Be a key player in shaping the fashion choices of the next generation!

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The Senior Process Engineer or Process Engineer II will support and lead manufacturing process development and optimization for our medical device products. This position plays a key role in ensuring that all manufacturing processes meet quality, compliance, and performance standards. The engineer will work closely with cross-functional teams including Quality, R&D, Regulatory, and Production developing, optimizing, and scaling manufacturing processes to improve yield, throughput, quality, and efficiency. The Process Engineer will have a strong operational, quality, and technical background. This is often a hands-on role working closely with the production team to train operators to new processes, troubleshoot equipment challenges, and write and execute qualifications and validations. This is a full-time, on-site position, located in Brooklyn, New York. It is a multi-faceted role in a highly collaborative environment that will require creativity and focused execution in pursuit of maximizing production outputs and creating robust manufacturing processes. Responsibilities: · Design, develop, and optimize manufacturing processes for new and existing medical devices. · Lead process development for new product introductions (NPI), from concept through validation and launch. · Develop and refine manufacturing processes to reduce variation, increase yield, improve cycle times, and reduce cost. · Evaluate and implement automation technologies to improve process consistency and throughput. · Interface with external vendors and suppliers to specify new equipment, product or process requirements, or troubleshoot product issues. · Analyze production data to identify trends, root causes, and opportunities for efficiency. · Maintain and update validation documentation as part of lifecycle management. · Ensure processes comply with applicable regulatory requirements and internal quality standards. · Lead root cause investigations (CAPA, NCRs, SCARs) and implement corrective and preventive actions. · Develop process documentation including standard operating procedures (SOPs), work instructions, pFMEAs, and equipment qualifications. · Partner with R&D during design transfer to ensure design for manufacturability (DFM) and seamless product integration. · Collaborate with Quality and Regulatory teams to support audits, inspections, and compliance initiatives. · Provide technical leadership and mentorship to junior engineers and technicians (for Senior level). · Monitor and analyze key process indicators (KPIs), quality metrics, and manufacturing data · Specify, procure, and validate manufacturing equipment and tooling. · Author and execute process validation protocols (IQ/OQ/PQ) in accordance with FDA and ISO 13485 standards. · Train manufacturing personnel on new or revised processes and equipment. · Provide ongoing floor support for manufacturing operations, helping to resolve technical issues in real time. · Other duties may be assigned as deemed necessary by management Requirements · Bachelor’s degree in Chemical Engineering, Mechanical Engineering, Biomedical Engineering, or related field. · Process Engineer II: 5+ years of experience in a regulated manufacturing environment with 3+ years process development, design, and process implementation required. · Senior Process Engineer: 10+ years of experience in a regulated manufacturing environment with at least 5 years hands-on experience in process development, design, and process implementation required, preferably in medical device, pharmaceutical, or biotech manufacturing. · Understanding of FDA 21 CFR Part 820, ISO 13485, and GMP requirements. · Proven experience with process validation (IQ/OQ/PQ), root cause analysis, and CAPA. · Proven experience in process design, optimization, and troubleshooting. · Experience implementing process and quality improvements into manufacturing or CMO · Strong analytical and problem-solving skills. · Ability to multitask and prioritize work, while remaining detail-oriented. · Demonstrated experience training technical personnel. · Familiarity with data analysis tools and manufacturing software. · Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies. · Experience with Lean Manufacturing, Six Sigma, or similar methodologies. · Hands-on experience with manufacturing processes such as formulation, fill and finish, packaging, and CIP. · Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency in a timely manner. · Demonstrated experience managing third-party vendors and service providers. · Demonstrated ability to work independently as well as be a strong team contributor. · Ability to effectively work within a team and cross-functionally to expedite the completion of critical project tasks. · Excellent verbal and written communication skills required. · Ability to become gowning qualified to work in a cleanroom environment. · Ability to speak, listen, and understand verbal and written communication in English. · Ability to lift 30 pounds of force occasionally and to lift, carry, push, pull, or otherwise move objects. · Strong computer skills, with proficiency in the use of Microsoft Excel, Microsoft Word, Microsoft PowerPoint. · Legal authorization to work in the United States. Preferred Qualifications: · Master’s degree in Engineering or related field. · Experience in medical device or pharmaceutical · 3+ years of relevant cGMP manufacturing experience. · Experience in cleanroom operations, including aseptic processing. · Experience with CMOs. · Significant experience with CAD software · Experience in supporting regulatory inspections and audit readiness. · Six Sigma certification (Green or Black Belt) or Lean Manufacturing experience. · Mechanical/Electrical knowledge with the ability to troubleshoot equipment · Strong leadership skills with the ability to influence and motivate a cross-functional team · Organizational and time management skills with the ability to prioritize a variety of tasks/projects. · Demonstrated understanding of aseptic processing and microbial control concepts. Benefits Competitive annual base salary range of $90,000 - $150,000, depending upon job level and qualifications. · Paid Vacation, Sick, & Holidays · Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage · Company Paid Life and Short-Term Disability Coverage · Work/Life Employee Assistance Program · 401(k) & Roth Retirement Savings Plan with company match up to 5% · Monthly MetroCard Reimbursement Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Industrial Designer Elizabeth, NJ | Full-time Responsibilities: * Develop and refine designs for truck accessories (bumpers, visors, custom panels, etc.). * Create accurate 2D drawings and 3D models (AutoCAD, Inventor, or similar). * Prepare DXF files for laser cutting and ensure designs meet production requirements. * Collaborate with the fabrication team to ensure feasibility and accuracy. * Assist in prototyping, testing, and adjusting designs as needed. * Maintain organized design files, drawings, and part numbers. * Stay updated with trends in truck design and customization. Requirements: * Bachelor’s degree in Industrial Design, Mechanical Design, or related field (or equivalent experience). * Proficiency with CAD software (Autodesk Inventor, AutoCAD, or SolidWorks). * Strong understanding of manufacturing processes (laser cutting, welding, bending, etc.). * Creativity with an eye for detail and aesthetics. * Ability to manage multiple projects and meet deadlines. * Experience in the automotive/trucking industry is a strong plus. * Spanish is a requirement Company DescriptionAbout Us Tony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.About Us\r\nTony’s Custom Shop is a fast-growing truck accessory and fabrication company specializing in stainless steel bumpers, visors, and custom parts for heavy-duty trucks. We are seeking a creative and detail-oriented Industrial Designer to join our team. This role is ideal for someone with strong technical skills and a passion for transforming concepts into manufacturable designs.

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Why Join us? At Voyant, you’ll be part of a team turning cutting-edge research into real-world products. As a growing startup, we offer interns the chance to make a meaningful impact, work closely with senior engineers, and learn what it takes to build disruptive sensing technology. This is more than an internship — it’s a chance to grow your technical skills and career in one of the most exciting fields of hardware innovation. Plus, we love to grow our team from within, and great interns often become great full-time teammates—we’re always excited to make that happen. Position Overview We are seeking a motivated and hands-on LiDAR Test Engineering Intern to join our team and directly contribute to the development of our next-generation LiDAR modules. This is a unique opportunity to gain real-world experience in a fast-growing startup, working with disruptive sensing technology at the intersection of photonics, hardware, and software integration. As an intern, you will take on a highly cross-disciplinary, hands-on role. Your primary project will involve designing and building a complete module test fixture—from electrical and mechanical design to data collection and analysis. This internship is an excellent opportunity to apply engineering fundamentals while collaborating across teams in a fast-paced environment. To be successful, you should highlight on your resume a project you’ve built that combines electrical, mechanical, and software/firmware elements. During the interview process, we will ask you to walk us through your design choices, trade-offs, and problem-solving approach. We are looking for resourceful, curious, and driven engineers who thrive on building and testing real systems. Location: NYC Responsibilities: * Design & Build Test Fixture * Select and integrate electrical and mechanical connectors for module interface * Design and layout a custom PCB for testing functionality and signal access * Develop a mechanical enclosure for the test fixture ensuring ease of use and robustness * Test Automation & Data Handling * Write scripts to automate test execution and collect module performance data * Implement data storage and logging infrastructure for traceability * Perform initial data analysis (e.g., signal integrity, power, thermal, or optical performance) and summarize results for the engineering team * Collaboration & Reporting * Work with hardware, photonics, and systems engineers to ensure fixture validity and coverage * Document test plans, fixture schematics, and software in a reproducible, maintainable format * Present findings and recommendations to the team in a clear and structured manner Qualifications * Currently pursuing a BS or MS in Electrical Engineering, Mechanical Engineering, Computer Engineering, or a related field * Coursework or project experience in PCB design, mechanical CAD, or test fixture development * Familiarity with scripting languages such as Python or MATLAB for data collection and analysis * Comfort with basic lab equipment (oscilloscopes, power supplies, multimeters, etc.) * Strong problem-solving skills and eagerness to work hands-on in a lab environment Preferred Qualification: * Experience with test automation frameworks (e.g., PyVISA, LabVIEW, or custom Python libraries) * Exposure to signal integrity, optics, or sensor systems * Previous internship or project work involving both mechanical and electrical design * Strong written documentation and data analysis skills What We Offer * Team events and company meetups * Complimentary lunch provided daily at our NYC office * Opportunity to contribute directly to the development of next-generation LiDAR products * Mentorship from senior hardware, photonics, and systems engineers * Hands-on experience with PCB design, mechanical prototyping, and test automation * Competitive compensation and potential for conversion to full-time Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job Description Fire Safety Alarms, Inc. is seeking a highly motivated and experienced Fire Alarm Field Technician to join our team. This is an exciting opportunity to join a dynamic team and make a significant impact in the fire safety industry. This is an excellent opportunity for a technology-oriented individual with a desire to utilize their skills in fire safety alarm systems throughout the NYC area. RESPONSIBILITIES: • Technicians must be able to work independently and are responsible for complete installation and full servicing of systems and equipment. This includes reviewing work orders for project specifications, installing, maintaining, repairing (ordering and replacement of faulty parts), testing, diagnosing, and servicing various types of equipment, machinery, or systems., • Completing and maintaining daily notes of installation, maintenance, repairs, and service history, progress reports showing that project specs are completed, and picture documentation before closing the job., • Diagnose and troubleshoot malfunctions, identify root cause, implement effective repairs., • When on call, respond to emergency situations promptly, providing efficient and reliable solutions., • Complete reports on time, including service paperwork, inventory log, time card and weekly expense reports., • Fire Alarm System Installation/Maintenance/Servicing, • Low Voltage Wiring, • EMT/Rigid Pipe-work, • Basic Power Tool Operation, • Electrical Troubleshooting, • Understanding Building codes, specifically NYC, and fire alarm codes, • High School Diploma or Greater Required, • Must be fluent in English. Reading, writing, speaking., • Basic Fire Alarm/Electrical Knowledge, • Ability to read and interpret CAD fire alarm blueprints and schematics would be beneficial, • Working Knowledge of NFPA-72, • NICET Certification (Level - II) is a Plus, • NYC Certificate of Fitness S-98 (Fire Alarm System Inspection, Test and Service Technician) Also a Plus, • Candidate must be a Self-Starter with a Good Work Ethic. Works well independently and as part of a team., • Candidate must Have a current, clean Driver's License - No moving violations, • Candidate must be Fluent in English, • Able to participate in a two-week rotating "on-call" schedule, • Competitive salary commensurate with experience., • Performance bonus opportunities., • Health, dental, and vision insurance., • Pension Plan, • Paid time off and holidays., • Ongoing training and professional development opportunities., • Dynamic and collaborative work environment.Company DescriptionFire Safety Alarms, Inc. (FSA), is a well established fire alarm company founded by several Chief Officers of the New York Fire Department in 1979. The company was originally located in Manhattan when the scope of work was confined to fire protection consulting services with high-rise commercial buildings. We specialized in obtaining waiver/modifications of Local Law 5/73, preparing timetables of compliance, and conducting assessments of high rise properties. In 1981, FSA moved to Jersey City and expanded operations to include fire protection engineering, fire alarm design, inspection and fire alarm installation pursuant to the High Rise Fire Safety Law known as Local Law 5/73. In 2024, FSA moved to Newark, NJ to expand its office space. FSA is licensed by the State of New York for Security and Fire Alarm Systems, License No.12000028978, and the State of New Jersey, License # 34FA00134400. Our technicians hold required FDNY certificates of fitness and/or NICET certification.Fire Safety Alarms, Inc. (FSA), is a well established fire alarm company founded by several Chief Officers of the New York Fire Department in 1979.\r\n\r\nThe company was originally located in Manhattan when the scope of work was confined to fire protection consulting services with high-rise commercial buildings. We specialized in obtaining waiver/modifications of Local Law 5/73, preparing timetables of compliance, and conducting assessments of high rise properties.\r\n\r\nIn 1981, FSA moved to Jersey City and expanded operations to include fire protection engineering, fire alarm design, inspection and fire alarm installation pursuant to the High Rise Fire Safety Law known as Local Law 5/73.\r\n\r\nIn 2024, FSA moved to Newark, NJ to expand its office space.\r\n\r\nFSA is licensed by the State of New York for Security and Fire Alarm Systems, License No.12000028978, and the State of New Jersey, License # 34FA00134400. Our technicians hold required FDNY certificates of fitness and/or NICET certification.

Job Description Why Join Us? At Porcelanosa, we believe that design is more than just aesthetics—it’s about transforming spaces and bringing visions to life. As a Design Consultant, you’ll be at the forefront of helping clients create stunning, functional interiors using our premium tile, bath, and kitchen products. If you have a passion for design, a talent for sales, and the ability to connect with clients, this role is the perfect opportunity to grow your career in a dynamic and stylish showroom setting. What We Offer: • Competitive Compensation – Base salary plus commission opportunities, • Comprehensive Benefits Package Including:, • 100% 401K match up to 4%, • 3-tier medical insurance, • 2-tier dental insurance, • Vision insurance, • Employer-paid life insurance, • Critical illness, hospital indemnity & accident insurance, • $3,000 Tuition Reimbursement – Invest in your professional growth As a Design Consultant, you will play a key role in guiding clients through their design journeys, ensuring they make informed decisions while driving sales success for the showroom. Your responsibilities will include: • Engaging with Clients – Welcome and consult with customers in our showroom to understand their design preferences, budget, and project needs., • Providing Expert Design Advice – Offer guidance on color, texture, lighting, layout, and product selection to help customers bring their vision to life., • Utilizing Design Software – Create design plans and visual representations using CAD software such as SketchUp to assist customers in decision-making., • Sales & Relationship Building – Close sales, establish long-term client relationships, and generate repeat business through exceptional customer service., • Showroom Maintenance – Ensure displays are well-organized, products are stocked, and the showroom remains a visually inspiring space., • Order & Delivery Coordination – Provide accurate pricing, process orders, track deliveries, and assist with any customer concerns., • Staying Ahead of Trends – Keep up-to-date with the latest design trends, industry innovations, and new product offerings., • Other duties as assigned. What You Bring to the Team: • Experience – 3-5 years in a design consulting or sales role, preferably in a showroom setting., • Technical Skills – Familiarity with CAD software (SketchUp, AutoCAD, or similar) is highly preferred., • Sales & Customer Service – Proven ability to connect with customers, provide top-notch service, and close sales., • Strong Organization & Time Management – Ability to multitask, prioritize, and work efficiently in a fast-paced environment., • Team Player Mindset – Able to work both independently and collaboratively., • Attention to Detail – A keen eye for design and accuracy in product recommendations and order processing.

Job Description Call Receiver Under general supervision of the Director of Communications the Call Receiver is responsible for answering and triaging all undirected calls coming into the Communication Center and directing them to the most appropriate resource. This person is the "face of the company" and must provide each caller with the highest level of customer service possible. Essential Duties & Responsibilities: • Demonstrate exceptional customer service skills with both internal and external customers, • Maintain a calm and professional demeanor at all times, • Answer, evaluate and prioritize incoming telephone calls while communicating effectively with all callers to obtain complete information to determine need, • Demonstrate ability to communicate clearly and professionally both verbally and in writing, • Develop a high degree of familiarity with Company service areas and medical facilities, • Maintain a high degree of familiarity and demonstrate compliance with all established Company and customer policies and procedures as they apply to coordination of patient referral and transport, • Demonstrate the ability to professionally and courteously 'control the call' in difficult interactions and effectively direct the flow of the conversation, • Demonstrate the ability to take direction, work independently and as part of a group, • Operate a computer terminal and demonstrate proficiency with the Microsoft Office Suite, • Operate multi-line computerized phone system, • Demonstrated background in successful customer service experience, • High school diploma or equivalent, • Ability to accurately take incoming requests while simultaneously documenting the information electronically, • Must be able to sit for an extended period of time and wear a telephone headset, • Minimum of one year of multi-line telephone experience, • Must be able to successfully pass a background investigation and pre-employment medical examination, which includes drug and alcohol screening, • Must be available to work all shifts, including but not limited to day/swing/night, weekends, holidays and mandatory overtime as needed and perform role efficiently and consistently during shifts, • Must be able to sit for an extended period of time, • Requires frequent repetitive hand movements, standing, walking, reaching and grasping, • Must be able to hear and communicate clearly in English to perform job duties in person and over the telephone, • Adequate vision required to be able to read information from printed sources and computer screens

Job DescriptionSalary: $65k - $75k About Us American Exchange Group is an industry leader in fashion accessory products and brand management. By facilitating distribution to major retailers internationally for their globally recognized brands, custom private label brands, and exclusive licensed brandsincluding footwear, tech wearables, watches, jewelry, handbags, fashion accessories, home, and beautyAmerican Exchange Group raises the bar by disrupting the status quo with value and quality, while staying at the forefront of trends. Joining American Exchange Group means being part of a dynamic and diverse team where your contributions drive real impactand where theres always room to grow. If you're looking to be part of a company that blends heritage with hustle, were excited to meet you. Visit our website at Associate Home Textile Designer Location:New York, NY (Onsite M-TH, WFH Fri) Experience Level:14 years About the Role We are looking for a creative and detail-oriented Associate Home Textile Designer to join our design team. The ideal candidate has hands-on experience in the home textiles industry, with a strong background in designing decorative pillows, bedding, throws, and bath products. You should be comfortable managing multiple projects in a fast-paced environment and thrive in a collaborative team setting. Key Responsibilities • Design and develop home textile products, including decorative pillows, bedding, throws, and bath., • Create artwork, patterns, and technical design files using Adobe Photoshop and Illustrator., • Collaborate with production, sourcing, and sales to bring designs from concept to completion., • Research design trends, colors, materials, and techniques to deliver fresh, market-relevant products., • Balance multiple projects and deadlines with accuracy and attention to detail., • Support showroom set-up for internal and client presentations. Qualifications • 14 years of professional experience in home textile design., • Proficiency in Adobe Creative Suite, knowledge of additional design or CAD software is a plus., • Strong eye for color, pattern, scale, and texture, with sensitivity to both trends and timeless design., • Excellent organizational skills with the ability to handle multiple priorities., • Strong communication and collaboration skills; a true team player., • Eagerness to learn, grow, and take on new challenges. What We Offer • Comprehensive Health & Wellness Benefits, including medical, dental, vision, and supplemental insurance, • 401(k) Retirement Savings Plan with company match, • Generous Paid Time Off (PTO) and paid holidays, • Half Day Fridays with shortened hours during both Summer and Winter seasons, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Tax-free commuter benefits, • Exclusive employee merchandise discounts Salary:The anticipated base salary is$65k - $75kannually. Actual compensation will be determined based on a variety of factors including, but not limited to, experience, skills, education, internal equity, and location. This position description is not intended to be and should not be construed as an all-inclusive list of responsibilities, skills or working conditions associated with this position. While this description is intended to accurately reflect the position's activities and requirements, management reserves the right to modify, add or remove duties as necessary. The compensation package is dependent on a number of factors, including, for example, experience, education, market data, and business needs.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay Stark Tech is seeking an experienced Director - Operations to lead and optimize day-to-day activities within one of our business units. In this role, you'll be responsible for developing and implementing effective operational strategies, overseeing team performance, and ensuring alignment with company goals. You will collaborate with leadership on budgeting, revenue objectives, and long-term planning while identifying opportunities to improve processes and implement new technologies. This position requires a strong, hands-on leader who can balance strategic vision with operational execution, fostering a culture of collaboration, accountability, and continuous improvement. If you're ready to make an impact and help shape the future of our operations, we encourage you to apply today. What are we looking for • Bachelor's degree in Business Administration, Logistics, Engineering, or other industry-related field required. Master's degree or MBA preferred., • At least 10 years of industry-related experience required., • At least 5 years of upper management/leadership experience required., • At least 10 years of BMS or HVAC related project management experience required., • Demonstrated working knowledge of Schneider Electric EcoStructure and the Andover Controls' Infinity and Continuum product lines or other building automation software preferred. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description CNC Laser Punch Press Programmer / Operator A manufacturing company is seeking an experienced CNC Laser Punch Press Programmer/Operator to support sheet metal production. The role involves programming, setup, and operation of CNC laser/punch combo machines (Amada or similar) in a fast-paced environment. Key Responsibilities * Program, set up, and operate CNC laser/punch combo machines for cutting and forming sheet metal parts. * Perform full machine setup, including programming (GibbsCAM/MasterCAM or similar), tooling installation, and material loading. * Interpret blueprints and technical drawings to determine settings and requirements. * Monitor operations, make parameter adjustments, and ensure product quality. * Inspect parts, perform basic maintenance, and follow all safety procedures. * Collaborate with production leads to meet schedules and quality goals. Qualifications * 5+ years of experience programming and setting up CNC laser/punch combo machines (Amada preferred). * Proficient in CAD/CAM software (GibbsCAM, MasterCAM, or equivalent). * Strong knowledge of sheet metal fabrication, tooling, and laser cutting processes. * Skilled in blueprint reading and use of precision measurement tools. * Effective communication and time management skills. * Ability to thrive in a fast-paced manufacturing environment. Company DescriptionCompany is a long-standing business with a reputation for integrity, technical expertise, and strong customer relationships. Our employees are part of a collaborative, close knit team that values hard work, open communication, and continuous improvement.Company is a long-standing business with a reputation for integrity, technical expertise, and strong customer relationships. Our employees are part of a collaborative, close knit team that values hard work, open communication, and continuous improvement.

Job Description About the Company Our client is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. They are on a mission to create a limitless source of zero emission energy for a sustainable future. This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors. About the RoleOur client is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting ("HTS") magnets. HTS magnets are foundational components of the company's planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you'll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Responsibilities • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersRequirements, • At least a bachelor's degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • 5-10+ years of relevant experience, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one's own, • Full-time, on-site positionBenefit Highlights, • Competitive salary, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • Open vacation policies, • Work-life balanceCompensation is determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. Equal Opportunity Our client is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. About AdAstra AdAstra Talent Advisors is a headhunting and talent advising firm focused on the Climate, Space, and Defense sectors of Hard Tech. We specialize in pairing highly technical and executive talent with some of the world’s leading Hard Tech startups. At AdAstra, we catalyze the innovations that future generations depend on by placing the right people in the right seats. Our dedicated work enables inconceivable technology from Earth, to the stars. And it’s all because of trailblazing talent like you - those driven to do what’s never been done before. We care about long term relationships with both candidates and companies. Even if the role we initially discuss isn’t a perfect fit, it’s likely we’ll have something relevant to share with you in the future. Join us on our journey by following along via LinkedIn! CEO, Seyka Mejeur | LinkedIn profile CTO / COO, Brian Mejeur | LinkedIn profile AdAstra Talent Advisors | LinkedIn profile AdAstra Website

Job Description You’re a technically minded, detail-driven designer who thrives in Revit and loves applying your skills to complex, creative environments. You enjoy working across disciplines, whether it’s theatrical lighting, stage rigging, or architectural planning—and you’re energized by the idea of contributing to the design of world-class live performance and gathering spaces. At Fisher Dachs Associates, you support a team of designers by preparing Revit-based drawing sets, creating families, and maintaining clean, coordinated models. You’re comfortable juggling deadlines and collaborating with project managers and technical leads. When a Revit question comes up, you’re the person your colleagues go to—because you understand both the software and how to apply it efficiently and consistently. You have a strong knowledge of architectural and construction graphic standards and are eager to use this knowledge to create well-documented, professional drawing sets. You take pride in producing clean, well-organized BIM models and are enthusiastic about organizing a set of custom BIM standards perfectly suited to the requirements of an interdisciplinary consulting firm. You can perform Quality Assurance and Quality Control of Revit project models. You’re fluent in AutoCAD, too, and know how to import backgrounds, manipulate blocks, and build out design sheets. You know how to take a rough sketch, a concept, or a few notes—and turn it into a model that moves a project forward. You work on-site in our NYC office and value the close, in-person collaboration that our projects require. You’re comfortable in architectural conversations, with a working knowledge of how buildings go together and how to interpret construction drawings. You bring: · 2 to 3 years professional experience with BIM360/AutoCAD Construction Cloud and Revit (versions 2020 through current release) and: o The ability to build clean, parametric families, manage model coordination with ease, and use design options confidently o An interest in learning about new developments in BIM technology and tools as they are released and share your knowledge with a wider design team o Speed and accuracy when developing and packaging drawing sets o Listening skills and the expertise to turn ideas into models and documentation quickly · 2 to 3 years professional experience with AutoCAD and the ability to create and maintain drawing setups, blocks, arrays, and CAD standards · The skills to integrate CAD and Revit workflows cleanly when needed · An architectural background or equivalent experience in design or engineering · Fluency in drawings and the language of buildings and performance venues · A collaborative and proactive approach to supporting others across departments · A desire to be in the design studio, on-site, and part of the creative process You might also: · Be curious about theatre design and live performance spaces · Have a familiarity with stage rigging or theatrical lighting systems · Use tools like Rhino and Grasshopper, Dynamo, and other visual scripting platforms · Enjoy helping others level up their Revit game What you get: · Salary: $65,000 – $80,000 depending on experience and qualifications · Full healthcare, dental, and vision coverage · Retirement plan with employer contribution · Paid vacation, holidays, and sick time · Paid parental leave · Exposure to world-class design projects and performance venues · Occasional travel to industry events or trade shows About Us Fisher Dachs Associates is a premier international consulting firm specializing in the design and planning of performing arts and cultural spaces. From Broadway to opera houses, concert halls, dance theatres, cruise ships, and corporate auditoriums, we collaborate with architects and owners worldwide to bring new and renovated performance, presentation, and gathering spaces to life. Our team includes designers with deep knowledge of stage lighting, rigging, planning, and technology. We draw from real-world production experience and technical expertise to create spaces that work for artists, technicians, and audiences alike. Learn more at Equal Opportunity Fisher Dachs Associates is an Equal Opportunity Employer. We value diversity and foster an inclusive environment for all employees. We encourage applications from all qualified individuals, regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, or veteran status. Company DescriptionFisher Dachs Associates is a premier international consulting firm specializing in the design and planning of performing arts and cultural spaces. From Broadway to opera houses, concert halls, dance theatres, cruise ships, and corporate auditoriums, we collaborate with architects and owners worldwide to bring new and renovated performance, presentation, and gathering spaces to life. Our team includes designers with deep knowledge of stage lighting, rigging, planning, and technology. We draw from real-world production experience and technical expertise to create spaces that work for artists, technicians, and audiences alike. Learn more at Dachs Associates is a premier international consulting firm specializing in the design and planning of performing arts and cultural spaces. From Broadway to opera houses, concert halls, dance theatres, cruise ships, and corporate auditoriums, we collaborate with architects and owners worldwide to bring new and renovated performance, presentation, and gathering spaces to life.\r\nOur team includes designers with deep knowledge of stage lighting, rigging, planning, and technology. We draw from real-world production experience and technical expertise to create spaces that work for artists, technicians, and audiences alike.\r\nLearn more at

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionSalary: $25.00 - $30.00 / hr CNC Operator Job Description Dynamic and rapidly growing Brooklyn-based fabrication shop is looking for a consistent, organized, hard-working, and self-motivated CNC Operator responsible for maintaining consistent quality, accuracy, and organization of all CNC cuts completed across multiple CNC machines. The CNC Operator is also responsible for performing machine maintenance, as well as assisting with projects outside of the CNC department. To fulfill these required responsibilities, they are expected to collaborate with multiple departments in accordance with company goals, standards, and schedules. Position Responsibilities include: CNC Machines • Overseeing the performance of daily operation tasks that will be either carried out personally or delegated to other trained CNC Operators., • Maintaining organization and cleanliness of the CNC workspace at Kent and Emerson shops., • Coordinating with machine technicians to perform routine maintenance as well as troubleshooting errors or accidents when the machine is down., • Timely advance communication to the Drafting Manager regarding operator scheduling of cuts on multiple machines to allow for efficient planning of labor allocation., • Interfacing with the Drafting department regularly on project-based work, receiving tasks, and giving appropriate feedback promptly., • Maintaining a consistent and proactive cutting queue within established deadlines., • Communicating with the appropriate parties if and why a change in deadline is expected., • Catching and reporting bad geometry submitted by the drafting department Position Requirements: • Fluent in English, • Proficient in all CNC operations including vacuum pumps, dust collection, machine interfaces, part organization, and maintenance., • Communicates well with various departments., • Experience with CAD / CAM programs is desirable, RhinoCAM is highly preferred., • Forecasting and communicating potential issues before they arise., • Highly organized work ethic., • At least 2 years of CNC operating with an exceptional understanding of CNC machines and their process., • Experience in the fabrication or construction industry is desirable. This position is eligible for Health Benefits after the 12 Month ACA Measurement Period based on hours worked. Although we are primarily a wood fabrication facility, we specialize in all types of fabrication and installation projects. This includes large and small experiential events, architectural millworks, custom art pieces, retail spaces and photo sets. Our facilities have multiple CNC machines, laser cutters, 3D printers, wood and metal shops. The current management team has a variety of backgrounds that help us tackle a wide array of builds and we are looking for someone with a varied background and skill set to help facilitate a flexible and readied work environment. Please visit our website to see what we do: If you think you would be a good fit at The Factory NYC and have the required experience, please send your resume, work samples, and a cover letter explaining you interest in the positions in response to this posting. Position Type: Full-time position Pay ranges from $25.00-$30.00 per hour based on experience. Overtime opportunities are available based on company timekeeping standards.

About TraxNYC TraxNYC is a high-end luxury jewelry brand renowned for crafting some of the most exquisite and detailed jewelry pieces in the world. With a history of innovation and a commitment to the finest craftsmanship, we are looking for a talented, creative, and detail-oriented Jewelry Designer who specializes in 3D modeling and CAD design to join our growing team. This is a unique opportunity to work in an exciting, fast-paced environment with a team that values both artistic vision and technical expertise. Position Overview As a Jewelry Designer at TraxNYC, you will be responsible for creating detailed 3D models and CAD designs for a wide range of jewelry pieces, from custom designs to our signature collections. Your role will involve collaborating with our designers and jewelers to bring ideas to life and ensure each design meets the highest standards of quality and precision. Key Responsibilities: • Design 3D models for various types of jewelry (rings, chains, bracelets, etc.), • Create CAD designs and technical drawings for manufacturing, • Collaborate with the design team to refine and perfect jewelry concepts, • Prepare files for 3D printing, prototyping, and production, • Maintain up-to-date knowledge of 3D modeling software, CAD technologies, and jewelry trends, • Work on custom projects with sales team, interpreting visions into detailed designs, • Ensure that designs are both creative and production-friendly, optimizing designs for manufacturing Qualifications: • Proven experience as a Jewelry Designer with a strong portfolio (please include a portfolio or samples of previous work), • Expertise in 3D modeling software (Rhinoceros, Matrix, AutoCAD, or other relevant CAD software), • Strong understanding of jewelry design principles, gemstone settings, and manufacturing techniques, • Ability to create high-quality technical drawings and 3D models for production, • Detail-oriented with a keen eye for precision, • Excellent communication skills and ability to work in a collaborative team environment, • Experience with 3D printing and rapid prototyping is a plus, • A passion for fine jewelry and staying up-to-date with industry trends, • Highly organized, detail-oriented, and reliable, • Comfortable working with high-value merchandise, • Strong communication skills and ability to multitask under pressure, • Punctual and dependable with a professional attitude, • Legal authorization to work in the U.S. and valid photo ID required Why Join Us? Be part of an industry-leading jewelry company known for luxury and innovation • Work with a talented and passionate team of professionals, • Opportunities for growth and creative expression in a fast-paced environment Compensation & Schedule: • Pay: $18.00 – $26.00 per hour (based on experience), • Subject to increase over time based on performance, • Schedule:, • Full-time, Monday – Friday, • Standard shift: 10:00 AM – 6:00 PM (8 hours), • Occasional weekend availability may be required, • Location: In-person, New York, NY 10036 (Diamond District) Perks & Benefits: • Paid time off, • Employee discount, • Opportunity to contribute creatively to high-end custom pieces, • Work with a fast-growing, respected brand in the luxury jewelry space, • Clear room for advancement within the production and design departments If you’re looking for a serious opportunity in the luxury jewelry world — and you’re ready to apply your creativity, organization, and industry knowledge — we want to hear from you. At TraxNYC, every detail matters. Check out our social media below Instagram: TikTok: YouTube: Facebook: Twitter/X:

Associate Designer – Juniors Sweaters Location: On-site (Mon–Thurs, 9:00 AM–6:00 PM) WFH: Fridays (Occasionally Remote) Salary Range: $57,000 – $66,500 / year (DOE) Experience Level: Associate 5+ years Education: Bachelor's Degree About RDG Global At RDG, we are a U.S.-based apparel design and manufacturing company with a global reach. We’re known for our bold trend direction, proprietary labels, and licensed brand partnerships. Our team works with top national retailers to deliver trend-right, high-quality fashion across multiple categories—Juniors, Girls, Contemporary, Women's Plus, and Activewear. Join us and become a part of a creative, fast-paced, and highly collaborative team that’s shaping the future of retail fashion. Position Overview We’re seeking a talented and trend-savvy Associate Designer with a strong background in Juniors sweaters. The ideal candidate is passionate about knitwear, understands the junior customer, and thrives in a team environment where innovation, speed, and collaboration are key. You’ll work closely with the Senior Designer to conceptualize, design, and develop seasonal sweater collections for major retailers, aligning with pricing, aesthetic, and brand strategy. Key Responsibilities • Research market trends, yarn innovations, and silhouettes to inform seasonal concepts, • Support the Sr. Designer in developing collections for private label and licensed brands, • Prepare inspiration boards, trend reports, and seasonal color palettes, • Create detailed flat sketches (Adobe Illustrator or hand-drawn) and tech packs, • Collaborating with the CAD team on artworks, layouts, and sketch presentations, • Participating in customer market appointments and occasional travel, • Coordinate directly with overseas factories throughout development, • Source yarns and trims, manage swatches, and attend relevant trade shows (e.g., Spinexpo), • Attend fit sessions, review counter samples, and ensure design integrity is maintained, • Manage sample tracking and ensure timely follow-up with factories, • Support cross-functional communication between design, production, technical, and merchandising teams What We're Looking For • Bachelor's Degree in Fashion Design, • Minimum 5 years of design experience focused on sweaters, • Strong knowledge of sweater construction, stitches, yarns, gauges, and costing, • Proven ability to interpret trends for the Juniors market, • Private label experience and familiarity with major U.S. retailers, • Excellent sketching ability (Illustrator and/or hand), • Highly proficient in Adobe Creative Suite (Illustrator, Photoshop), Microsoft Office, • Strong organizational and time management skills, • Detail-oriented, creative, and able to work independently or in a fast-paced team environment Why Join Us? • Competitive salary, • Comprehensive benefits: Medical, Dental, Vision, 401(k), HSA/FSA, • Paid time off: Vacation, Sick Days, Personal Days, Flex Holidays, • Short- & Long-Term Disability, • Commuter benefits, • Collaborative, inclusive company culture, • Opportunities for growth and creative input Ready to Apply? If you’re passionate about designing sweaters for the Juniors customer and want to work in a company where your ideas matter—we’d love to hear from you.

Job Description High Rise Fire and Security, affectionately known as High Rise, founded in 1992, is a leading fire alarm, life safety and security systems solutions provider. We provide a broad range of products and services including, but not limited to, the design, installation, service and maintenance of Fire Alarm, Auxiliary Radio Communication, Area of Refuge, Parking Garage Gas Detection, Card Access, Camera Surveillance, Video Intercom and Intrusion Systems. High Rise is an Edwards Systems Technology (EST) Strategic Partner and a multi-year winner of “Strategic Partner of the Year Award” for the Northeast Region. We are the first North American member of the SCUTUM Group. SCUTUM, founded in 1989, is a fast-growing, privately owned, leading European life safety company with offices in France, Germany, United Kingdom, Belgium, the Netherlands and Luxembourg. SCUTUM complements our solutions with additional products, services and expertise in electronic security, cyber security and defense security with an Artificial Intelligence (AI) platform. At High Rise, we pride ourselves on our ability to maintain thorough and up-to-date industry knowledge as well as provide expertise in local code requirements. Our employees are equipped with comprehensive knowledge and extensive experience in providing life safety system solutions throughout New York City Metro Area and the South Florida market. We are looking for a Systems Security Technician to Install, Service, Troubleshoot, Test, Program & Integrate systems with regard to Intrusion, Card Access, Surveillance CCTV, and Intercom products. Required Education and Experience • High School Diploma or GED equivalent / Some Vocational School / 6 months to 2 years trade school certification and 2 years of alarm installation/service experience, • Working knowledgeable in service, operation, and programming of Intrusion, Access Control & CCTV systems, including IP devices and network services, • Experience in Honeywell, DMP, Keyscan, Brivo, Speco, Napco, Exacqvision, Avigilon- a plus., • Perform Install-to-termination for Access Control; program and commission site systems, • Mount and position CCTV cameras, integrate to NVR, and set up surveillance functions, • Install, program, test, and demonstrate Intrusion and Intercom system operations, • Configure IP network devices for interoperability of security devices, • Troubleshoot systems and perform other duties as required to ensure systems are functioning properly and satisfy code as applicable, • Establish and maintain effective working relationships with both internal and external clients, • Complete miscellaneous tasks as assigned such as job-site clean-up, • Work independently and/or as part of a team with Manager, Project Engineer, Electrical Installers to ensure best practices, • Understanding of Windows operating systems and overall IT network topology, • Capable of working with LAN / WAN and network applications, • Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low voltage applications, • Safe use of hand and power tools such as hammer drills, masonry saws, voltmeter, cable, tone generator, signal, soldering & RJ crimp terminations, • Understanding of electronics theories and principles (Ohm’s Law, AC/DC, etc.), • Proficiency in report-writing procedures, • Capable of lifting up to 50lbs and climb ladders when required in an indoor and outdoor work environment, • Basic project and time management skills, • Good listening, verbal, and written communication skills, • Understanding of all company policies and procedures, • Competitive base salary plus bonus, • Expense account, • Full Medical and Dental coverage (Individual & Family), • Disability insurance, • Paid Vacations and Holidays, • 401k plan with additional company contributions, • Profit sharing, • Ongoing company sponsored certifications and technical training, • Access to industry training and tuition reimbursement, • Company laptop & iPad, • Career Development Planner (CDP™) High Rise offers variety of exciting career development opportunities within the organization which begins with the assignment of your own Career Development Planner (CDP)™. We have a robust learning and development platform that provides training and mentoring to employees at all levels of the organization. Employees are offered the opportunity to take part in a range of internal training initiatives to hone their existing skills and continue to grow professionally in accordance with the changing external environment. In addition, our peer-to-peer coaching program and emphasis on dynamic information exchange between teams ensures that our people are challenged intellectually and given the opportunity to succeed in their role. Our organization is growing, dynamic, and proud of our culture in providing a collaborative work environment where employees are consistently engaged and work together to provide top quality service. This is what makes us one of the best small companies to work for in New York, according to the New York State Society for Human Resource Management (NYS-SHRM). Come explore the possibilities at High Rise

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description What to expect as a Commercial Security Senior Service Technician: The Senior Service Technician will be responsible for service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems. As a Security Senior Service Technician, this person is expected to be a highly proactive and skilled individual and, at all times, maintain performance consistent with Allied Universal Technology Services' core values. • Travel to commercial client sites to service, repair, troubleshoot, and detect access control equipment and IP-based video security systems. including, but not limited to:, • (Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems), • Troubleshoot system installations in a such a manner as to identify issues and apply the most effective and efficient resolution consistent with company installation standards; identify and repair physical security systems as required to ensure operability and compliance with any applicable building code, • Apply all necessary documentation for tracking of service-related issues, • Demonstrate knowledge and skill in the safe use of hand and power tools, analog/digital test equipment and CCTV testing devices, • Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low-voltage applications, • Establish and maintain effective working relationships with both internal and external customers, • Provide phone and on-line remote diagnostic support, • Drive to commercial client sites, with a company-issued vehicle to perform service, • High School Degree, Vocational School or equivalent required, • 5+ years of field experience, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possession of state-specific licensing (i.e. Class D or Alarm Installer, etc.) or ability to hold license once hired, • Understanding of Windows operating systems and overall IT network topology, • Highly proactive and skilled individual, and at all times maintain performance consistent with Allied Universal Technology Services (AUTS) core values, • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Available for scheduled “on-call" duties to respond to emergency service calls, • Strong troubleshooting skills, mechanical and electronic aptitude, • Capable of lifting up to 50lbs and work on ladder heights of up to 16', • Be able to work independently or as a member of a team, • Salary range: $30 - $47 hourly, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days, • Vacation time offered at an accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. #LI-EB1 Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1446615

Experience in retail business fundamentals: department sales trends, inventory management, and process efficiency and improvement. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.

Duties, assignments, and other responsibilities may differ for similar positions based on business conditions, departmental or geographic location, and/or needs for the particular position. Team Leaders are required to spend significant time on the floor, engaging with customers, and pitching in to

Duties, assignments, and other responsibilities may differ for similar positions based on business conditions, departmental or geographic location, and/or needs for the particular position. Whole Benefits may include health insurance, retirement plan benefits, eligibility for a store discount, paid

CAD-CAM Tech Designer Experienced in Exocad , 3Shape Experienced in designing Large Span all Zirconia cases and PMMAs Experienced in designing Custom Abutments Experienced in Operating and Managing 3D printing and milling. Formlabs/ Heygears) 5 years experience minimum Employment Type: Full Time Sal

Serving New York’s best bagels, Apollo Bagels is bringing simplicity back to the bagel! With our fresh, simple, high-quality food at a great value.Apollo is a fun and lively community-gathering place unlike any other.As we experience tremendous growth, our leaders are the driving force to our

Paid Time Off - subject to service time and hours requirement. You’ll be an essential part of our team, helping us uphold the high standards of quality and service that define the. Maintain a clean and organized work environment, following all Department of Health (DOH) and safety standards.

KazuNori the Original Handroll Bar is looking for friendly, energetic people to join our team at our NYC locations.You must have a positive attitude, and work well in fast paced environments.We offer a lot of growth and look for OPEN availability.Our people work roughly 30-35 hours we

Cashier / Server – Bowl Maker.Oases is a vibrant and health-focused eatery dedicated to serving fresh, customizable bowls and providing exceptional customer service.We believe in creating a welcoming environment where both our guests and team members feel valued and energized.We are looking fo

Are you hospitality focused and a strong multi-tasker? HighLife is looking for Cashiers to help us make sure each guest experience is handled smoothly and that each guest leaves with a positive, lasting impression.Utilizing proper cash handling procedures.Maintaining a stocked, clean, and

Benefits & Perks: Health Insurance, Dental Insurance, Vision Insurance, Paid Time Off, Dining Discounts, Bagels.

Ability to prioritize during busy time.

KazuNori by sushi Nozawa is looking for friendly, energetic people for a cashier position at our Nomad location.You must have a positive attitude, and work well in fast paced environments.We look for OPEN availability and our people work roughly 30-35 hours weekly.Our locations are non tipping estab

A company is looking for a Mid-Level Graphic Designer with a social media focus.Key Responsibilities Adapt trending formats and visual storytelling techniques for engaging content Utilize AI tools to generate and refine imagery, enhancing design speed and quality Collaborate with team members to

Allied Universal - JobID: 1467059 [Security Officer] As a Security Guard at Allied Universal, you'll: Be responsible for the Security and Safety of the client's property and personnel; Know all site-specific policies and procedures, and implement emergency response activities as appropriate; Handle

Key Responsibilities: Lead project planning, scheduling, and tracking for Medical Affairs priorities and cross-functional deliverables Develop and maintain project timelines, dashboards, status reports, and documentation Implement and manage project management tools to drive cross-functional coo