Parts manager jobs in Fairfield, New JerseyCreate job alerts

Job Title: Radiology Service Engineer Location: Cooperman Barnabas Medical Ctr Department Name: Imaging Services Req #: 0000217059 Status: Hourly Shift: Day Pay Range: $28.15 - $43.64 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Reports to assigned work locations as required to meet organizational needs. RSE2 demonstrates confidence using tools and test equipment to perform preventative maintenance and service on radiological equipment. Ensures radiological equipment meets manufacture specifications and is safe for patient care. Demonstrates troubleshooting skills necessary to complete most repairs on multiple modalities. When necessary provides information to assisting engineers to minimize down time and loss of continuity of care. Aids team members and other clinical engineering staff both remotely and onsite as required. Documents all work performed in a timely fashion and participates in the radiology emergency on-call program. Staff assists management in meeting regulatory requirements and department/organizational goals. Performs other duties as assigned or required. Qualifications: Required: * • Minimum AAS degree in Biomedical Engineering, Electronics Engineering Technology or equivalent work/military experience on radiology equipment., • 3+ years of experience servicing radiology equipment on more than one vendor and/or modality, • Can demonstrate proficient use of hand tools, • Working knowledge of electricity/electronics, • Working knowledge of mechanical and electro-mechanical components, • Can demonstrate proficient use of electronic test equipment including oscilloscope, • Can complete most repairs without assistance, • Working knowledge of MS-Office and other computer applications, • Working knowledge of computers and networks, • Working knowledge of radiological safety procedures, • Multiple manufacture certifications, • Attentive to detail and excellent follow-up with customers., • Excellent customer service skills, • Ability to work under pressure, • Ability to attend vendor technical training regardless of method or location, • Valid NJ Driver’s License Scheduling Requirements: • Days to work- 8A-4P M-F, occassional Saturday, • Full-Time, • Working Location(s): Livingston, possible local travel to other RWJBH sites Essential Functions: • Conducts preventive maintenance inspections appropriate to level of job competence using appropriate productivity & quality measures., • Completes monthly assigned tasks within the specified timeframe prioritizing inspections of high risk over low risk equipment., • Recognizes unsafe conditions & notifies appropriate management team members to correct them., • Works collaboratively with senior technical staff to creates & enter PM procedures following manufacturer guidelines., • Effectively responds to service requests, competently troubleshoots & repairs medical equipment appropriate to job proficiency level using established productivity & quality measures, demonstrating good judgment on performing component vs. circuit board level repairs., • Demonstrates the need to maintain an adequate level of parts on hand as applicable, to assist in keeping downtime to an absolute minimum., • Timely and accurately documents all service requests and repairs in the biomedical equipment database., • Inspects new devices & equipment with competence appropriate to job proficiency level. This includes judgment on safety, compliance with codes, standards & ability to learn about the function/performance of new devices with speed & comprehension., • Secures all required device information for biomedical equipment database., • Demonstrates the need to have current service and operator manuals on hand for proper servicing of all types of medical equipment., • Assists Manager in maintaining and fulfilling the department/organizational regulatory requirements and goals., • Complies with system, hospital and departmental policies and procedures and objectives., • Reports witnessed violations that put patients, staff, department or facility in jeopardy to appropriate management personnel., • Demonstrates a thorough knowledge of shop safety including the use of electronic test equipment., • Assists Manager with responding to/correcting medical equipment recalls/device alerts from manufactures and/or F.D.A., • Participates in On Call duties after normal working hours. Must respond to a call within 15 minutes by telephone, and report to the facility within a maximum of one hour if required to be on site., • Ability to give technical instruction to users over the phone minimizing equipment downtime while providing the continuum in patient care, and organizational cost effectiveness.

Field Service Technician I US-NJ-Roseland Job ID: 33943 Type: Full-Time of Openings: 1 Category: Field Service CUSA Roseland, NJ About the Role If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story. We’re actively seeking a Field Service Technician to deliver amazing experiences and elevated efficiency within the routine maintenance of Canon-supported products in accordance with Service and Parts Standards. Your Impact In this position, you’ll be accountable for: • Reporting to your manager product failure trends and serviceability issues with necessary supported documentation, ensuring accurate information and record keeping., • Meeting customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance., • Properly maintaining all technical information, Field Service Reports, Expense Reports, and Canon property assigned., • Showcasing strong customer communication and satisfaction skills., • Maintaining the performance of assigned machines., • Facilitating performance at a level which helps to achieve the branch/district’s overall metric targets. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. Do you meet these requirements? • Hold a High School diploma or equivalent experience required., • Possess a basic understanding of internet environments and the ability to successfully complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class., • Ability to travel (valid driver's license and acceptable driving record necessary)., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises., • Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). We are providing the anticipated base salary range for this role: $19.00-26.31 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #li-rb1 #pm19 PI56bac2ae1095-37820-39541456

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications * Responsible for qualification of all ECI products assuring successful process qualification of systems as per specifications. * Review and validate all chemical packages and qualification data. * Should data not pass qualification requirements escalate information decision to manager; create deviation report for approval. * Follow qualification plans and pre and post procedures. * Review, complete and verify documentation for chemical specifications; communicate revisions and changes. * Coordinate at configuration stage to ensure system correctly configured based on specific chemistry requirements. * Ensure all issues are NC properly and closed with solution and documentation is corrected. * Understand all the systems processes and apply the relevant metrology concept and techniques. * Independently troubleshoot the systems to complete the project in timely manner. * Taking ownership of the systems and complete within the due date. * Reviewing Data as per specifications, correcting Systems database for mismatches. * Mixing chemicals using different volumes and multiple types of chemistry as per procedure. * Performing all actions of job duties safely and maintain good housekeeping in working area and chemical mixing area. * Travel 5-10% if required. Preferred Qualifications: * Excellent interpersonal skills to ensure effective collaboration with other team members is crucial * Possess ability to multi-task different projects/reports, work independently and focus on details. * Experience in interpreting engineering diagrams for troubleshooting and identifying parts. * Experience in different chemical analytical techniques: Voltammetry, HPLC, ICP, Titration, etc. * Experience in chemical handling, interpreting SDS/MSDS and on job safety. Work Schedule: This role follows a rotating schedule to ensure consistent coverage while distributing responsibilities fairly across the team. • Day Shift: 8:00 AM - 4:30 PM In addition, weekend oncall coverage is shared among the team and generally occurs one weekend per month, as needed. Minimum Qualifications Master's Level Degree and 0 years related work experience; Bachelor's Level Degree and related work experience of 2+ years Base Pay Range: $75,000.00 - $127,500.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Project Manager Location: West Orange, NJ Compensation: $85,000 – $100,000 per year (competitive, based on experience) Full-Time | In-Person About Us We pride ourselves on organization, efficiency, and strong coordination between office operations and on-site teams. As we continue to expand, we are seeking a highly organized and driven Project Manager to support and oversee multiple active projects. Position Overview The Office Project Manager will play a critical role in coordinating construction projects from an administrative and operational standpoint. This position works closely with on-site project managers to ensure materials are ordered, timelines are met, and communication flows smoothly across all teams. The ideal candidate is detail-oriented, proactive, and experienced in managing multiple moving parts in a fast-paced construction environment. Key Responsibilities ● Coordinate and manage office-side project operations across multiple construction projects ● Schedule and communicate regularly with on-site project managers ● Ensure all project materials are ordered accurately and delivered on time ● Track project timelines and follow up to ensure deadlines are met ● Lead and support on-site project managers to complete work efficiently and to specifications ● Oversee administrative project documentation and internal processes ● Identify opportunities to improve office procedures and day-to-day operations Qualifications ● Minimum 3-5 years of experience in office management and/or project management ● Proven ability to manage multiple projects and meet deadlines consistently ● Strong leadership skills with experience coordinating teams or projects ● Excellent written and verbal communication skills ● Proficiency with office software, including email platforms, spreadsheets, and databases ● Exceptional organizational and time-management abilities ● Ability to manage many small details with accuracy and follow-through ● Self-motivated, energetic, and eager to grow with the company Compensation & Schedule ● Salary: $85,000 – $100,000 per year (competitive, based on experience) ● Job Type: Full-time ● Schedule: 8-hour shift ● Work Location: In-person Competitive salary based on experience ● Paid time off and holidays ● Professional development opportunities ● Growth potential within a fast-paced and supportive team environment

At Kushner, we pride ourselves on our four core values: Be Caring, Be Best in Class, Be Solution-Oriented, and Be Accountable. Our values represent what we strive to achieve every day. Every decision we have to make is guided by the “4 Be’s”. Our team and passion for the real estate industry exemplifies what it means to live out these core values in our offices and at our communities day in and day out. Each new day is a learning experience at Kushner, whether it is the knowledge we bring, gain, or share during our journey together. Our team members are set up to aim beyond, achieve the utmost success, and for endless possibilities for growth. Come Grow With Us! JOB SUMMARY This position is responsible to lead one or more construction projects and for the management of the overall planning, scheduling, code compliance, cost tracking, safety, and completion of these projects. The Superintendent is responsible for directing and mentoring subcontractors and other on-site field staff. The position requires business management acumen and must demonstrate strong leadership, organizational and time management skills, as well as have strong communication and team building skills. WORK HOURS: Weekdays 7 am to 5 pm; Saturdays 7 am- 1pm, as required. RESPONSIBILITIES: • Assure the required permits and approvals from jurisdictional agencies are secured, posted, and renewed as required prior to starting work., • Develop, update, modify (as required) and maintain the project schedule including a master schedule, 60-day look ahead schedules for their assigned trades, and two-week look ahead schedules for their assigned trades., • Understand and be familiar with the date by which all materials must arrive on the job and convey that information to the project management team for preparation of the contract items lists and shop drawing schedules., • Coordinate scheduling of subcontractors, vendors, and inspectors to complete each project on time., • Communicate with and support each subcontractor to execute their job duties effectively and efficiently., • Monitor work and materials to ensure quality control standards are met at various stages of the project., • Perform inspections or schedule inspectors to meet the varying safety and compliance regulations of each job location., • Prepare the daily construction reports in a thorough and timely manner and maintain a written daily log of visitors, job actions performed, materials expended, and problems resolved on the job site., • Assure daily job progress photographs are taken in ample quantity to accurately depict the progress of the work., • Travel between multiple job sites and simultaneously manage work loads of individual projects, • Understand and ensure risk controls are properly established and maintained., • Understand and uphold the site safety plan., • Understand and uphold the site logistics plan., • Assure the implementation and continuous maintenance of corporate safety program requirements in all of the day-to-day operations on the project., • Prepare and attend the weekly subcontractor meetings. Assist in maintaining the minutes of these meetings, and ensure they are recorded and distributed., • Prepare and manage weekly safety meetings, regular toolbox talks, and safety pre task meetings as required., • Attend weekly meetings with the project team for purposes of updates on the status of the field work and communication of any issues requiring the input or action of others on the project team, and for notification to the project team of issues that may be of importance or interest to them., • Establish and maintain a system of document control to assure work is being installed in accordance with the latest design documentation and approved shop drawings., • Communicate any issues requiring additional information from designers and consultants in a timely fashion to the project manager for issuance of RFI’s., • Assist in preparation of the monthly status report to be submitted to the lender. REQUIREMENTS: • Requires Engineering, Construction Management or related Bachelor’s degree, OR equivalent years of related experience., • Requires 10+ years of experience in Stick-frame Multi-Family Residential Construction. Previous Sitework and Structured Garage Construction experience is preferred., • Requires working knowledge of various construction disciplines, cost control, scheduling, safety regulations, engineering drawings and other documents required., • Requires superior communication and interpersonal (tact, diplomacy, influence, etc.) skills essential both within the internal project team and externally with subcontractors, labor force, etc., • Requires the ability to work with and have knowledge of the shop drawing submittal process., • Requires the ability to read and comprehend building plans and specifications and able to comprehend and recognize safety standards and issues., • Requires the ability to determine the priority of assignments based on critical deadlines., • Requires the ability to resolves field-initiated questions., • Requires understanding of construction contracts, retention, releases., • Requires the ability to interact with all levels of personnel and customers., • Must possess strengths in verbal and written communications; ability to adapt communications/presentations and deliver clear and concise reports and analysis to senior management., • Requires ability to meet deadlines and work in a structured corporate environment., • Requires the ability to be self-motivated and work independently with minimal supervision. Also requires high degree of ethics and integrity., • Requires ability to maintain confidentiality of all company and customer information. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. These demands are typically required when working onsite. • Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction., • Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus., • Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl., • Must occasionally lift and/or move up to 50 pounds., • While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock., • Noise in these work environments is usually moderate to very loud. Benefit Highlights: • $2k relocation benefit available, • We match 50% of the first 6% of 401k contributions, • No wait period for Health Benefits & we contribute $1k to the HSA plan, • We have assistance for student loans as well as tuition reimbursement, • We have a great employee referral program, • We offer a housing discount in all our communities EQUAL OPPORTUNITY EMPLOYER & EQUAL HOUSING PROVIDER

Job DescriptionBenefits: • Employee discounts, • Health insurance, • Wellness resources We Empower the Fighting Spirit in You! We Offer • Compensation package: Competitive base salary plus bonus., • Comprehensive health benefits: Full coverage for medical, dental, and vision., • Free membership perks: Complimentary access to all our fitness centers., • Employee discounts and special offers: Exclusive deals on fitness products and wellness services., • A fitness-focused workplace vibe: On-site fitness classes, wellness programs, and a supportive community., • Ongoing in-house training: Regular workshops and training sessions., • Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns., • Works on special projects as directed by the General Manager and Operations Manager., • Maintains the history file on all equipment., • Procure repair parts, materials, tools, and equipment., • Performs monthly OSHA safety checks as required on the OSHA / PM guidelines., • General knowledge of HVAC and/or electrical equipment, • The ultimate Big Gym experience, UFC GYM raises the bar of what big-box gyms should offer their members.

Job Description Pay Rate: $34.53/hr + 12% shift differential Basic Function (Purpose of Position): To perform the routine repairs and installation of equipment in a timely manner to ensure minimal disruption to site operations. Essential Responsibilities and Specific Duties: • Holds at least one of the skills outlined (welding, pipe fitting, basic millwright, electrical and instrumentation)., • SAP Data entry as required for compliance and production purposes., • Trains in operation of all plant equipment as required for type of process in operation, including extraction, distillation, liquid compounding, washed extraction, and emulsions., • Interprets electrical schematics, piping and instrumentation diagrams (P&ID), and process flow diagrams (PFD)., • Maintains spare parts inventory, reporting deficiencies for restock and reorder., • Maintains a neat, orderly and clean workplace at all times., • Works in compliance with Good Manufacturing Practice (GMP), Occupational Safety and Health Administration (OSHA) regulations and adheres to internal policies., • Performs other duties as required. Hourly Job Description – Job Specifications Minimum Education/Experience/Skills/Job Knowledge/: High School diploma or equivalent with 3-4 years previous general mechanical experience in pipefitting, welding, or pump and equipment repair is required. Must possess mechanical ability, an electrical aptitude and vocational or trade school certificates or diplomas relating to a minimum of one craft within welding, plumbing, pipefitting or electrical areas. Must be certified to operate a forklift. Computer skills are preferred. Must be willing to cross-train in other specialized crafts within Maintenance department. Dependability, effective communication skills, ability to follow instructions, good attendance and willingness to work overtime are essential. Organization Relationships: Internal Contacts: Frequent employee contact at all levels of the organization. External Contacts: Vendors and visitors. Working Conditions: May be exposed to dirty, wet or odorous conditions. May work in climatic weather changes, various height or underground levels while operating in confined spaces or in shored ditches which may be six feet or more below ground level. May be required to participate in Medical Testing Program or Hazardous Materials training. Effect of Errors: Poor repairs or failure to comply with safety practices may lead to injury of self or others. Errors in repairs may result in customer delays or dissatisfaction. Physical Demands/Dexterity: Requires frequent standing, walking and climbing a ladder (up to 30 feet). May be required to maneuver equipment up to 100 lbs and lifting up to 50 lbs regularly. Must be able to crouch, bend, and twist to work on various equipment in various settings. Ability to use heavy power tools, including vibrational tools is essential. Working outside in adverse climate conditions is required, this can include, but is not limited to hot, humid, cold, or wet situations. Equipment Used: Power tools, welders, ladders, and standard tools are utilized frequently. Computer is used on a daily basis. Responsibility for Work of Others: No direct supervisory responsibilities; however, must be a team player. Reporting observation of non-compliant or unsafe situations to supervisor or EH&S manager as required. Authority: Based on knowledge and experience makes judgment calls and takes immediate action for basic repairs and response to alarm conditions in accordance with documented procedures.

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: The Packaging Mechanic II is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role, working under limited supervision, supports equipment reliability, production efficiency, and continuous improvement across packaging lines. This is a hands-on, mid-level technical role requiring experience with packaging machinery, changeovers, preventive maintenance, and troubleshooting, with the ability to work more independently while ensuring compliance with cGMP, safety, and environmental standards. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. . Job Requirements: • High school diploma or GED required., • 3–5 years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education and experience., • Strong mechanical aptitude with the ability to troubleshoot and repair equipment independently., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to read and interpret technical diagrams, gauges, maps, tables, and instrumentation., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Ability to work in a fast-paced manufacturing environment., • Working knowledge or exposure to PLC systems (Programmable Logic Controls) and ladder logic., • Technical school certification or related training., • 3–5 years of mechanical and electrical experience in a packaging or manufacturing environment., • Exposure to moving mechanical parts and vibration in a manufacturing environment., • Frequent standing (up to 8 hours), walking, bending, kneeling, crouching, crawling, and climbing., • Ability to lift and move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, and depth perception., • Repair Packaging Equipment: Perform repairs on packaging machinery as needed to maintain uptime., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to eliminate unscheduled downtime., • Execute Changeovers: Independently perform equipment changeovers to meet production requirements., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and internal teams., • Manage Tools & Parts: Initiate the purchase of required tools, parts, and materials, and maintain accountability for issued items., • Develop Technical Skills: Continuously upgrade skills as equipment and technology evolve., • Demonstrate Workmanship: Maintain a high level of quality craftsmanship and ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity and working knowledge of PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and support corrective actions., • New hires or internal transfers will complete a three-month training and orientation period. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: Under limited supervision, the Packaging Mechanic III is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role supports equipment performance, production efficiency, and compliance with cGMP, safety, and environmental standards. The position requires hands-on involvement in equipment troubleshooting, diagnostics, maintenance, and changeovers, as well as support for equipment improvements and reliability initiatives in a fast-paced environment. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. Job Requirements: • High school diploma or GED required., • 7+ years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education, training, and experience., • Strong mechanical aptitude and ability to work in a fast-paced environment., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to interpret basic blueprints, schematics, and exploded parts diagrams., • Ability to read and comprehend complex instructions., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Ability to read and interpret workplace graphics, tables, maps, gauges, and diagrams., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Familiarity with PLC systems (Programmable Logic Controls) and ladder logic., • Experience working with packaging equipment and automation systems, including cartoners, inkjet coders, labeling systems, slat fillers, vision systems, and Allen Bradley HMI/VFD platforms.Preferred Qualifications:, • Technical school certification., • 7+ years of mechanical and electrical experience in a packaging/manufacturing environment preferred., • Experience using machine shop equipment.Physical Requirements:, • Exposure to moving mechanical parts and vibration., • Frequent standing, walking, bending, kneeling, crouching, crawling, and climbing throughout the shift., • Ability to lift and/or move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment.Key Responsibilities:, • Diagnose & Repair Equipment: Diagnose, rebuild, modify, and repair packaging equipment to ensure optimal performance., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to reduce unscheduled downtime., • Execute Changeovers: Perform efficient, timely changeovers to meet production requirements., • Recommend Equipment Improvements: Identify and recommend equipment upgrades and modifications to improve performance and reliability., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and employees., • Manage Tools & Materials: Initiate purchase of required tools, parts, and materials, ensuring accountability., • Continuous Skill Development: Upgrade skills and knowledge as equipment and technology evolve., • Maintain Work Quality: Demonstrate commitment to quality craftsmanship and job ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity with PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and perform appropriate corrective actions., • Perform other job-related duties as assignedTraining:, • New hires or internal transfers will complete a three-month training and orientation period., • Proficiency will be evaluated by the area manager or assigned trainer and documented accordingly. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job Description NOW HIRING HVAC SERVICE TECHNICIANS – RUSSO Brothers, East Hanover, NJ Location Flexible Schedules – up to $5000 Sign-on Bonus – earn $65K+ $100K+ About Russo Bros & Co Join a company with over 70 years of trusted service in Northern New Jersey! At Russo Bros. & Co. Plumbing, Heating & Air Conditioning, we believe in teamwork, integrity, and helping our employees build lasting, successful careers in the home services industry. Why Join Our Team? • Competitive Pay, • Weekly Paycheck, • Performance Bonus Opportunities, • Company-Provided Tools (as applicable), • Company-Provided Vehicle & Fuel Card, • Free Uniforms 401(k) Match & Health Benefits (Medical, Dental, Vision), • Short & Long-Term Disability + Company Paid Life Insurance, • Paid Time Off (PTO) + Paid Holidays, • Employee Assistance Program What you will do: • Maintain communication with dispatch, your manager, parts, and installation teams, • Keep your company truck clean, inside and out, • Keep your truck inventory up to date, • Properly complete paperwork, • Maintain a clean and professional appearance, • Have and maintain a clean driving record, • Participate in training allowing you to grow and develop as a professional, • Have or be willing to get the proper certifications. (We can help you with this), • Maintenance & Service of Residential HVAC Systems, • Communicating with clients and customers What we are looking for: • At least 3 years of experience in residential HVAC service, preferred, • Must have knowledge of the phases of residential HVAC., • Learn & be compliant with all standards & practices for data recording & reporting on invoices, • Troubleshooting & diagnosing and explaining all problems and options to clients, • Apply knowledge to perform thorough and accurate HVAC inspections and communicate findings, • Must comply with all safety regulations and processes, • Ability to deal effectively with customers and solve technical problems, • Excellent customer service skills Experience/Education: • HVAC 3 + years (Preferred), • High School Diploma or equivalent required, associates and college degrees preferred License/Certification: • Driver's License (Required), • EPA 608 Certification (Universal preferred) Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job Description HVAC INSTALL TECHNICIANS - LEAD INSTALLERS NEEDED ASAP! We are BUSY! NOW HIRING! Sign on Bonus of up to $7500! RUSSO BROS, East Hanover, NJ & Surrounding Counties! Experienced, Seasoned INSTALL LEADS - This HVAC Team is BUSY & GROWING! Great opportunity to join our Team! Our best Techs with a proven track record have top earning potential $$$ - join our team today!!! Earn $35.00-$45.00 /hr+ Incentives- Opportunity to earn up to $130K yearly! Sign on Bonus of up to $7500! We’re looking for a detail-oriented & experienced HVAC installation technician to join our team. You’ll be responsible for installing heating, cooling, indoor air quality, & ductwork systems to manufacturers & codes by local jurisdiction. Candidates to consider will have proven experience installing residential boiler systems As an HVAC installation technician, you will work as part of a dynamic team providing 5-star customer experience by utilizing your expertise in the HVAC industry. The ideal candidate has the technical skills to understand wiring diagrams, local codes, installation of equipment, while ensuring the equipment is configured and operates properly. Ready to join our growing HVAC team? The position will be based in the field, with your very own company-provided take-home truck. WHY WORK FOR RUSSO BROS? • Highly competitive wages, • Industry leader and ongoing bonus potential, • Thriving customer base with consistent work all year, • Fully stocked, take-home company truck, E-Z pass, gas card, cell phone, and tablet. No need to come to the “shop” everyday!, • Strong company culture – Annual employee appreciation party, rewards & recognition, • Top Branch Leaders: RUSSO Brothers East Hanover NJ, Branch known for its leadership team! Come work for the best!, • Install, replace, and service heating, air conditioning, air quality, and refrigeration systems., • Connect electrical wiring and control systems according to diagrams and safety codes., • Join fuel, water, and refrigerant lines to HVAC systems andtest forleaks., • Use electrical testing equipment to check circuits, calibrate components, and ensure safe operation., • Maintain clear communication with theDispatch,Parts, andInstallationteams, as well as your manager., • Keep your company vehicle clean, organized, and properly inventoried., • Complete all required documentation accurately and on time., • Enter completed projects and parts usedintothe database., • Educate customers on proper system use and maintenance., • Follow all company, industry, and safety standards at all times., • Participate in ongoing training to advance your skills and certifications., • Valid driver’s license a MUST, • High school diploma or equivalent., • 2+ years of HVAC installation experience + Universal EPA, • Candidates will have proven experience installing residential boiler systems, • Strong work ethic and commitment to quality craftsmanship., • Basic understanding of electrical wiring, connections, and system components., • Comfortable working in attics, crawl spaces, and tight environments., • Excellent communication, problem-solving, and customer service skills., • Professional appearance, positive attitude, and team-oriented mindset., • Ability to lift upto 50lbs, climb ladders, work in attics, crawl spaces, and other residential environments., • Experience usingServiceTitanor similar software a PLUS, • NATE Certified a PLUS Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job DescriptionSUMMARY Duties of the packer position include operating the packer to fill bags of product, operating the sewing machines to seal bags, operating and adjusting bag top formers, operating palletizers, operating ink jet printers and Label Machines. The position of packer is responsible for weights of bags, sealing of bags, coding of bags, correct labeling of product, checking to be sure the correct bags are being packed, volume of output and keeping work area neat and clean. Packers may be assigned other duties as needed by the supervisor. FOOD SAFETY/SECURITY REQUIREMENTS The Company is committed to producing and delivering defect-free products. • To ensure this, all employees are required to be trained on and adhere to the “Good Manufacturing Policies” set forth by the Company as they pertain to personnel practices, equipment, and facilities., • It is also vital that all employees be aware of their work environment to prevent any accidental or intentional adulteration of products produced at the facility. SAFETY • While performing the essential job functions, the employee is expected to work in a safe manner and follow company policies regarding safety., • It is the expectation and responsibility of the employee to work safely and report any and all injuries immediately to their supervisor and to report any safety situation that the employee feels is substandard and poses a risk for employee injury, property damage, or loss. TEAMWORK • Ensures that appropriate individuals are informed about matters impacting their areas of responsibility; works well with others; shares knowledge and experience with others; demonstrates respect and consideration for others’ opinions; contributes to the overall task of the team., • Demonstrates integrity; works effectively in teams; facilitates inter-departmental cooperation; cooperates with supervisors and peers to accomplish work assignments; helps create and maintain effective working relationships. DEPENDABILITY • Follows through on tasks; requires minimum supervision and follows instructions and procedures. Arrives at work on time; follows company policies including vacations and leaves. Observes Company rules; completes tasks within deadlines. QUALIFICATIONS To perform the job of packer successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Needs to be able to communicate both verbally and in writing in English., • Needs to be able to perform basic math functions, with or without the aid of a calculator., • Needs to be capable of learning to perform computer entry., • Needs to be an independent worker with self-initiative to carry out job functions., • Must be willing to rotate shifts to cover absences if required. EDUCATIONAL REQUIREMENTS • Possess a high school diploma or equivalent (GED). Possess strong analytical skills., • Must be willing to learn the Company’s DBC computer system. LANGUAGE SKILLS • Must be capable of communicating and following written and verbal instructions. Must be able to read safety rules, operating and maintenance instructions, technical procedures. MATHEMATICAL SKILLS • Capable of performing basic math functions, with or without the aid of a calculator. Ability to work with mathematical concepts and apply concepts such as addition, subtraction, multiplication, division, fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY • Ability to define and solve problems collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables at any given time., • Ability to apply common sense understanding to carry out training instructions furnished in written, oral, or diagram form. PHYSCIAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to work in an environment which has extremes in temperature., • Be able to climb ladders., • Must have physical dexterity to perform basic repair functions., • Be able to stand for extended periods of time., • Frequently required to bend, stoop, kneel, crouch or crawl., • Constantly required to twist torso., • Frequently required to lift and or move 100-pound bags., • Vision requirements are close vision, distance vision, color vision and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, and fumes or airborne particles. The employee is exposed to vibrations. The employee is occasionally exposed to high precarious places. The employee will be exposed to extremes in temperature, both hot and cold. The work environment is noisy, at times in excess of 100 decibels. FOOD SAFETY / SECURITY REQUIREMENTS: The Company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained in and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of the work environment and when possible, prevent accidental or intentional adulteration of products produced at this facility. As a result any employee has a right to put the product on hold if they have a concern. At the plant level, only the Quality Assurance Manager and General Manager have the authority to release products on hold.

Job DescriptionAbout This Role: The Studio Manager oversees the daily operations of our ear piercing studio, ensuring the highest level of customer service, and maintaining a clean, safe, and welcoming environment. The ideal Studio Manager candidate will be a strong leader with a passion for retail, a commitment to safety and customer satisfaction, and an ability to drive sales and manage a team effectively. We are looking for an enthusiastic, customer-obsessed Studio Manager to join our team and oversee our Willowbrook Mall studio location.What you'll be doing as Store Manager: • Customer Experience:, • Create a warm, welcoming, celebratory atmosphere, greet and engage with customers., • Customer-obsessed, working on the selling floor shoulder to shoulder with your teams, leading by example and delivering celebratory customer service, ensuring every customer enjoys a joyful and memorable ear piercing experience., • Help customers and their friends and family choose and style their ears with Rowan jewelry., • Handle customer inquiries, concerns, and complaints with professionalism and a focus on customer satisfaction., • Maintain a clean, welcoming, and safe studio environment at all times., • Engage with the local community to drive brand awareness, traffic and appointments.Leadership + Team Management:, • Lead, coach, and develop a team of studio staff, including Nurse Piercers and Sales Associates, to ensure consistent delivery of exceptional customer service and adherence to Rowan’s Clinical Safety standards and protocols., • Accountable for meeting Studio targets and overall performance, driving revenue growth and creating a performance-oriented culture by setting clear expectations and targets for the Studio team., • Foster a positive and inclusive team culture that reflects Rowan’s values and mission, bringing out the best in the Studio team and helping all team members meet and exceed their goals., • Schedule staff within labor allocations to ensure optimal coverage while achieving payroll plans and audit for payroll accuracy, Manage time-off requests, and handle any staffing issues as they arise., • Recruit for open studio positions.Operations + Sales:, • Oversee all aspects inventory management, prioritizing Studio compliance to policies and standard operating procedures, while ensuring inventory control through POS accuracy and loss prevention measures., • Meet or exceed individual and Studio sales targets and performance metrics, including average order value, revenue to target, and increasing LTV by effectively communicating the value of Rowan’s services and products to customers, converting piercing customers to non piercing jewelry customers, and coaching and helping team members achieve their targets as well., • Drive sales and profitability by meeting or exceeding targets through optimized appointments, inventory sell-through, and ensuring proper daily team coverage to meet customer demand., • Ensure all visual merchandising standards are met and that product presentation, displays and fixtures are reflective of brand guidelines and standards., • Ensure compliance with all health and safety regulations, particularly regarding ear piercing procedures., • Ensure the studio and selling floor are neat, clean, organized, and reflects the brand image at all times. Training + Development:, • Train and onboard new staff members, ensuring they understand Rowan’s procedures, safety protocols, customer experience standards and product knowledge., • Leverage coaching and feedback to continually develop a diverse Studio team., • Provide ongoing training and development opportunities to staff to enhance their skills and knowledge.Administrative Duties:, • Prepare and submit reports on studio performance, including sales, customer feedback, and operational opportunities., • Ensure studio budgets, track expenses, and financial targets are met., • Coordinate with corporate teams on marketing initiatives, product launches, and other company-wide activities.Experience we're looking for:, • Proven experience in a retail management role for 3-5 years, preferably in a similar service-oriented environment. Jewelry experience a plus., • Proven strong leadership skills with the ability to inspire, motivate and develop a team., • Customer-obsessed, you love being on a selling floor with your team leading by example and delivering exceptional, memorable customer experiences., • Proven track record of driving sales and optimizing store profitability., • Excellent customer service skills with a passion for creating memorable experiences., • Ability to work a flexible schedule, including weekends and holidays., • Thrives in a fast-paced environment, able to adapt to multiple priorities while ensuring daily expected standards and financial goals are met., • Comfortable using technology, software systems and POS., • Deep understanding of retail operations, including inventory management and visual merchandising., • Strong organizational and multitasking abilities., • Knowledge of health and safety regulations, particularly related to piercing, is a plus., • Excellent verbal and written communication skills., • Proficient working in Google Suite (Calendar, Gmail, Sheets, and Documents)., • Analytical skills, including basic retail math, calculating inventory on-hands, tracking sales., • The role involves tasks that may include climbing ladders, bending, lifting, pushing, and reaching above and below the waist. The ability to lift up to 25 pounds is required., • Standing for a full 8-hour shift is a regular part of this role., • We are committed to providing reasonable accommodations to enable individuals with disabilities to perform the essential functions of this job, provided that these accommodations do not create undue hardship for the company, impede job performance, or pose safety concerns., • You make a commitment and stick to it! Studio Management Full-Time Benefits & Perks:, • Compensation: The anticipated annual base salary for this position is $65,000- $75,000., • Paid accrued Vacation and Sick Time for full-time employees., • Medical/Dental/Vision Health Plans for full time employees., • Employee Assistance Program (EAP) Resources., • 401k and Roth IRA Plans., • Generous employee discounts on our amazing products and services!

Job Description Daikin Comfort Technologies Northeast is seeking a professional, skilled individual for our Warehouse Associate position for our branch operations group located at our Westville, NJ branch. The Warehouse Associate is responsible for off-loading, put-away, picking and staging of equipment and parts while providing professional quality customer service to all internal and external customers. The warehouse associate is accountable for the movement of all materials within the warehouse and overall appearance while ensuring to meet all safety protocols. Position Responsibilities may include: • Safely and efficiently operate forklift and additional warehouse equipment to load/unload/transfer material and product without causing damage within the warehouse and to/from delivery trucks, • Ensure all items are received per procedure and stocked in assigned locations, • Maintain Inventory and Prepare Cycle Counts, • Complete Will Calls, • Responsible for timely and accurate completion of paperwork and transaction entries, • Proper PPE and uniform must be worn at all times during each shift, • Maintain warehouse and forklift by following good housekeeping and safety procedures including pre and post shift forklift inspections. Alert manager of any concerns immediately., • Assist Customers and CSRs as needed, • Follow standard operating procedures, established work processes and Company policies, • Perform additional tasks as required Nature & Scope: • Works within well-defined instructions, • Uses established procedures and works under supervision to perform assigned tasks, • Work is closely supervised Knowledge & Skills • Effective verbal and written communication skills, • High level of attention to detail and surroundings, • Basic Computer skills including data entry to process transactions and generate reports and orders, • Ability to successfully process (ex. Loading and Unloading) products, • Ability to operate a forklift safely and work in a fast-paced warehouse, • Ability to pass Prove It and driving test, • Must be eligible to be forklift certified in house within 30 days, • Effective verbal and written communication skills, • High level of attention to detail and surroundings, • Basic Computer skills including data entry to process transactions and generate reports and orders, • Ability to understand and follow work instructions, policies and procedures, • Be dependable, work well in a team environment, and establish positive working relationships with employees and customers, • Ability to work in warehouse that is not climate controlled Experience 1 plus years of warehouse experience 1 plus years industrial forklift experience strongly preferred. Education/Certification: • High School diploma or GED, • Must have Valid driver’s license People Management: No Physical Requirements / Work Environment: Must be able to perform essential responsibilities with or without reasonable accommodations. The ability to lift and carry items weighing up to 40 lbs or lift lighter items repetitively or perform 2 man lifts for heavier items. The ability to stand or walk for extended periods of time. Reports To: Supervisor, Warehouse Pay range: $20-22 per hour Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States. The Company provides equal employment opportunity to all employees and applicants regardless of a person’s race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes pertaining to individuals with disabilities.

MAURY MICROWAVE JOB DESCRIPTION Date: January 2026 Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager Brief Summary of Position: The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position \n • Soldering under a microscope\n, • Ability to work with through hole and surface mount components\n, • Ability to work with 0603 components\n, • Gap welding and wire bonding experience\n, • Experience with assembly of microwave components\n, • Ability to follow PCB layout and read electronic schematics\n High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: \n • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance.\n, • Group 401(k) plan with company matching contributions.\n, • Paid time off and company-paid holidays.\n\n Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: _x_Safety _x_Company Policies _x_Quality System ___ERP

Department: Machine Shop Reports To: Department Manager Physical Demand Level: Medium to Heavy FLSA Status (US only): Non-Exempt SUMMARY: The Machine Operator I is responsible for performing the essential manufacturing steps of part trimming and drilling, meeting daily production needs in manufacturing quality parts. SUPERVISORY RESPONSIBILITIES: This role does not have supervisory responsibilities. ESSENTIAL DUTIES & KEY RESPONSIBILITIES: \n • Maintains safe operations by adhering to safety procedures and regulations.\n, • Trim plated parts to print specifications utilizing manual and programmable Lathes.\n, • Core drill parts using equipment including manual drill presses, lathes and programmable HAAS Drilling machines\n, • Program HAAS machines for drilling operations.\n, • Performs preventative maintenance including fluid changes, lubrication and cleaning of machines when needed/directed by the Lead / Supervisor\n, • Accurately record production information on paper travellers and in the ERP system\n, • Maintains a clean machine and organized work area.\n, • Makes minor repairs and notifies maintenance for other maintenance needs.\n, • Performs variety of tasks such as counting, cleaning, returning gauges and fixtures, transferring of parts\n, • Use measuring equipment to maintain close tolerances\n, • Follows schedules and procedures\n, • Adaptable to cell and team concepts as well as cross-training\n, • Sees that all safety guards are in place and in good condition\n, • Assists other operators if necessary\n, • Inspects work in progress using equipment necessary and outlined in Quality or work instructions. Responsible for quality of own work; required to notify Supervisor or Lead if quality requirement is unclear or questionable\n, • Must be proficient in reading and interpreting blueprints, specification sheets, and/or mechanical drawings and in precision measurement or become proficient through training.\n, • Computer literacy\n\n\n, • Capable of using measuring instruments, i.e. micrometer, calipers, comparator, height gauge, etc.\n, • Capable of using hand tools (i.e. screwdriver, wrenches etc.)\n Desired • Medical\n, • Dental\n, • Vision\n, • Short Term Disability\n, • Long Term Disability\n, • PTO\n, • Paid Holidays\n, • Paid Sick Days\n, • 401K / 401K Company Match\n, • Life Insurance\n, • Paid Jury Duty\n, • Employee Referral Program\n, • Tuition Reimbursement Program based on\n, • Employee Assistance Program\n\n SALARY RANGE: $18.00 - $21.00/Hour based on experience and ability to perform work independently. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionPROSTAR Staffing is excited to partner with a wellestablished AV warehouse in Totowa, NJ, currently seeking a Cable Assembly Technician to join their growing team.This role is ideal for detailoriented individuals with handson assembly experience. The technician will be responsible for assembling panel cables, cutting cables, and providing logistics support as needed. Position Overview • Schedule: Monday–Friday, 8:30 AM – 5:00 PM, • Pay Rate: $18.50-$20.00hr DOE with soldering certification., • Pay Rate: $18.00hr without soldering certification., • Fastpaced production/plant setting., • Review assembly instructions and assemble products accurately., • Follow direction from the Operations Manager and FAB & Logistics Supervisor at CCA, • Verify all parts are present, meet quality standards, and fit correctly., • Read and interpret work instructions, specifications, and assembly documentation., • Interpret measurements and verify specifications for accuracy., • Assemble components and ensure proper fit and functionality., • Identify, troubleshoot, and resolve assembly and production issues., • Maintain a clean, organized, and safe work environment., • Report product errors and quality issues promptly, • Reassemble nonconforming cables and panels as required!, • Assemble optical fiber cable., • Background check and drug test required., • Ability to follow directions and complete assigned tasks with minimal supervision., • Strong attention to detail; organized and accurate, • Excellent verbal communication skills, • Ability to work with small parts while maintaining high-quality standards.

Job DescriptionDescription: Job Summary: We are seeking a full-time Cable Assembler Lead operator for Second Shift (3:30PM – 12:00AM). Responsible to manufacture finished products using sub-assemblies, component parts, and fasteners according to customer specifications and company policies. The Cable Assembly Lead serves as the primary on-site leader for the shift and is fully responsible for supervising personnel, meeting production targets Onboarding will include a minimum of 30 days working on First Shift alongside the plant Assembly Manager to ensure consistency, effective knowledge transfer, and operational alignment. Essential Job Functions: · Position is full-time Monday to Saturday; 3:30 pm – 12:00 am · Operate and maintain equipment safely while conducting high production output, quality, and efficiency levels · Crimping/swaging end fittings, tubing onto cut-lengths of wire rope using rotary swaging machines, and pneumatic and hydraulic presses · Ability to follow basic work instructions · Provide hands-on technical support, including machine troubleshooting, setup, calibration, and die changeovers. · Read and interpret blueprints, specifications, and work instructions; use precision measuring equipment (calipers, micrometers) to verify setups and perform in-process quality checks. · Ability to use measuring equipment such as micrometers, calipers, and tape measures to ensure dimensional conformance · Strong attention to detail · Ensure compliance with all safety policies, OSHA requirements, quality standards, and established work procedures. Requirements: Qualifications: · High School Diploma or GED required · This position requires standing, walking, kneeling, bending, climbing, pulling, pushing, lifting, and reaching above and below the shoulders. · Hands-on experience operating and troubleshooting production equipment. · Strong understanding of manufacturing processes, work instructions, and blueprint interpretation. · Proficiency with precision measuring tools, including calipers and micrometers. · Strong communication, problem-solving, and leadership skills. · Ability to lift up to 55 lbs. Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job DescriptionStudio Leads at JETSET Pilates are dynamic team members that help clients and assist instructors. Studio Leads are responsible for providing exceptional service to clients while assisting staff, whether it be in-person, via email, or over the phone. Most importantly, Studio Leads will build rapport with all clients and staff to create and maintain a welcoming environment. Studio Leads will be required to answer phones, field questions, respond to emails, and process sales in keeping with JETSET Pilates Standards of Service. They are expected to perform retail transactions accurately, maintain a clean and organized front desk and lobby area, assist Instructors in opening & closing duties, and stay up-to-date on all policies and pricing options in order to provide accurate information to existing clients and potential new clients. Studio Leads assume other duties as assigned and are expected to work morning, evening, and weekend shifts as necessary. Duties and Responsibilities • Assist in delivering the ultimate boutique fitness experience to every client, every time., • Provide the highest level of customer service to all clients and visitors upon arrival., • Greet and check-in clients professionally upon arrival and thank them as they leave., • Recruit and retain clients, answer questions, solve problems, and refer comments and concerns appropriately., • Sell memberships and class packages in-person, online, and over the phone., • Facilitate new sales, in conjunction with the General Manager/Owner-Operator by utilizing the Client Relationship Manager (CRM) system (AXLE)., • Maintain a clean and tidy studio.

Job DescriptionMAURY MICROWAVE JOB DESCRIPTION Date: January 2026 Job Title: Electrical Assembler FLSA Status: Non-Exempt Department: Manufacturing Reports to (Title): Production Manager Brief Summary of Position: The Electrical Assembler is responsible for safe, accurate, and efficient assembly of electrical parts using a variety of tools and equipment to build high precision test equipment according to required specifications, processes, and procedures. Fine motor skills and high-quality standards will be required to ensure efficient and accurate assembly, suitable for a high quality, high value final product. Essential Functions of the Position • Soldering under a microscope, • Ability to work with through hole and surface mount components, • Ability to work with 0603 components, • Gap welding and wire bonding experience, • Experience with assembly of microwave components, • Ability to follow PCB layout and read electronic schematics, • 1-2 years of prior work experience in a manufacturing environment Job Qualifications and Training: High School Diploma Benefits We offer the following benefits to full-time employees who have met all eligibility requirements: • Group medical, dental, and vision plans, group life/AD&D, and long-term disability insurance., • Group 401(k) plan with company matching contributions., • Paid time off and company-paid holidays. Physical Demands/Sensory Function: Frequency of Use: Stand Frequently Walk Frequently Sit Regularly Use hands Regularly Reach with hands and arms Regularly Climb or balance Occasionally Stoop, kneel, crouch, or crawl Occasionally Employee Training Required: Check all appropriate: _x_Safety _x_Company Policies _x_Quality System ___ERP

Job Description We are looking for a commercial HVAC service estimator with minimum 5 years of commercial HVAC experience to join our service team. This is a commercial service estimator position; applicants with residential service experience or those seeking a sales\account manager position are not encouraged to apply. Successful applicants must have prior field experience with commercial HVAC services. Responsibilities of this position include: • Review assigned service technician reports for field and diagnostic information, • Identify HVAC parts and materials needed for a service repair, • Collect pricing information for necessary parts and materials from local vendors, • Estimate labor hours needed to make repairs, • Write a scope of work for performing identified repairs, • Use company software systems to prepare quote pricing and issue proposals for customer approval, • Respond to customer questions on repair proposals, • Order materials and parts or select them from inventory for approved proposals, • Check materials and parts for completeness prior to technician dispatch for executing repairs, • Participate in weekly estimator meetings for service quoting, • flexible paid-time-off plan, • 401K plan with matching, • Multiple healthcare plans, including dental, • Vision, Life & Disability insurances, • Offices closed between Christmas and New Years, as well as other holidays, • Great team environment Support and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.Evco Mechanical is a commercial electrical / mechanical / BMS contractor serving the Northern NJ market for over 40 years. We provide a tight-knit, family-oriented company environment, where many employees stay for their entire career\r\n\r\nSupport and growth for our team members is a top priority at Evco; we consider employment as building a future together, not just providing a job. All personnel are provided with ongoing training and development of technical skills, site safety education, career planning and opportunity for growth. We welcome applicants who have a willingness to work hard and a desire to grow with the team.

Job Description Field Service Technician I - Staten Island Area US-NJ-Roseland Job ID: 33536 Type: Full-Time of Openings: 1 Category: Field Service CUSA Roseland, NJ About the Role If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story. We’re actively seeking a Field Service Technician to deliver amazing experiences and elevated efficiency within the routine maintenance of Canon-supported products in accordance with Service and Parts Standards. Territory will cover the Staten Island, NY and surrounding areas Your Impact In this position, you’ll be accountable for: • Reporting to your manager product failure trends and serviceability issues with necessary supported documentation, ensuring accurate information and record keeping., • Meeting customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance., • Properly maintaining all technical information, Field Service Reports, Expense Reports, and Canon property assigned., • Showcasing strong customer communication and satisfaction skills., • Maintaining the performance of assigned machines., • Facilitating performance at a level which helps to achieve the branch/district’s overall metric targets. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. Do you meet these requirements? • Hold a High School diploma or equivalent experience required., • Possess a basic understanding of internet environments and the ability to successfully complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class., • Ability to travel (valid driver's license and acceptable driving record necessary)., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises., • Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). We are providing the anticipated rate for this role: $19.00 - $26.31 hourly. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Posting Tags #li-rb1 #pm19 PIbcf9ba4e326f-25405-38475206

Job DescriptionManager Disability Inclusion & BelongingPart Time: 28 Hours/Week Location: Whippany, NJ Salary: $40,000 Hybrid: In office Monday, Tuesday and ThursdayAbout UsJewish Federation of Greater MetroWest NJ convenes and leads our community to strengthen Jewish life, care for those in need, and support Israel. We serve Essex, Morris, Sussex, Union, and parts of Somerset County, connecting people to resources and meaningful opportunities to engage. Position Overview Greater MetroWest is a national leader in disability inclusion. The Manager of Disability Inclusion & Belonging serves as a community resource and subject-matter expert, advancing inclusive participation across Jewish communal life. This part-time role partners with individuals, families, congregations, schools, agencies, and Federation departments to foster a strong sense of belonging for people with disabilities. Responsibilities are prioritized to align with part-time capacity. Key Responsibilities • Convene and staff the Professional Advisory Committee and ABLE Committee to strengthen collaboration, share best practices, and identify community needs., • Support and advance inclusive practices across congregations, agencies, schools, and communal programs., • Serve as a resource, advocate, and referral point for individuals with disabilities, families, and communal professionals., • Partner with lay leaders and professional staff to enhance existing inclusion efforts., • Collaborate with Jewish Community Relations Committee ,JCRCCommittee, JCRC, to integrate disability-related priorities into advocacy work.Qualifications, • Minimum three years of experience developing or implementing programs for people with disabilities., • Minimum three years of experience supporting individuals with disabilities and their families., • Knowledge of community-based disability organizations., • Experience in a Jewish communal, educational, or nonprofit setting. Jewish Federation of Greater MetroWest NJ serves one of the largest Jewish communities in NJ. Our employees contribute to our mission of strengthening Jewish life and identity and meeting basic human needs. We foster a collaborative, positive, and inclusive workplace culture where employees can work together to achieve common goals and develop careers. Located on a beautiful campus, we are close to several major highways, dining, and shopping options. #LI-hybrid Powered by JazzHR 19R8HAhCcL

Job Description The purpose of the Housekeeper is to perform the overall housekeeping services of the apartment complex under the direction of the Community Manager or Service Manager. It is this employee’s responsibility to maintain the clubhouse and office as well as to prepare vacant apartments in “sparkling clean” appearance for future residents. The Housekeeper provides the “first impression” of every future resident that walks into the interior of the property, therefore, this job is of the utmost importance to the property. Essential Duties include the following (other duties may be assigned): I. Housekeeper Responsibilities 2. Based on the Schedule of daily, tri-weekly, or bi-weekly, the Housekeeper maintains the interior of the following areas of the property: • Office, • Clubhouse, • Models, • Laundry Rooms, • Other Common Areas, • Vacant units 3. Life safety. Perform all work under safety procedures of the maintenance manual (i.e., protective gear such as gloves, shoes, eye shields, etc.)., 4. Responsible for the cleanliness of all vacant units and receives priority of work to perform from the Community Manager or Service Manager., 5. Responsible for all cleaning aspects of preparing the vacant unit including appliances, bathrooms, glass, etc. The unit is to be “sparkling clean” and ready for move-in when the Housekeeper is finished. Steam cleaning should be the only work remaining., 6. Tidies “ready” vacant units that have been ready for more than one week to dust, vacuum, and freshen up., 7. Responsible for the care and timely maintenance of all equipment entrusted to his/her care., 8. Maintains cleaning supplies and requests re-ordering of those supplies in a timely manner from the Community Manager or Service Manager. He/she insures the proper use of these supplies and prevents pilferage by residents or other employees., 9. Maintain proper stock amounts within budget restraints, keep all MSDS sheets in order, and chemicals properly labeled., 10. A Housekeeper may be called upon to perform other duties as required by the Community Manager or Service Manager from time-to-time., 11. The Housekeeper, as his/her part in the resident retention program, greets residents with a cheerful greeting and a helpful attitude., 12. Accepts responsibility placed on him/her by the Service Manager and accomplishes tasks in a timely manner., 13. Immediate pick up of any type of litter from any exterior or common area to maintain sharp appearance., 14. Perform any duties assigned by supervisor whether or not it is a part of this job description., 15. When running errands for the property you must have a current driver’s license from this state (unless military spouse carrying a license from their home state) and proof of valid car insurance with insurance limits according to state statutes. A copy of these must be kept on site. Material and Equipment and Forms Used • Vacuum, • Cleaning Chemicals, • Brooms, • Mop, • Bucket, • Sponges, • Protective Gloves, • Material Safety Data Sheets (MSDS) and book Qualifications: Special Skills Required One year previous housekeeping or janitorial experience. A professional attitude/appearance is essential. Attention to detail is the highest attribute of the housekeeper. Neat, clean, well-groomed appearance. Ability to work well with residents, supervisor, employees and vendors. · Ability to effectively communicate with people · Ability to maintain a professional image · Strong organizational skills · Strong verbal skills · Excellent customer service orientation · Assertive attitude · Ability to effectively "close" a sale · Must take and pass drug screening test Reports To: The Housekeeper reports to the Community Manager or Service Manager and receives direction and daily assignments from him/her. EEO/AAP Our commitment to diversity and inclusion is helping us to create not only a great place to work, but also an environment where our employees, our residents and our communities can reach their goals and connect with each other. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or protected veteran status. We are an Equal Opportunity, Affirmative Action employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to finger, type, handle or feel objects, talk, and hear. The employee is frequently required to stand; walk; reach with hands and arms, climb, stoop, and squat. The employee is intermittently required to sit. Incumbents must be able to physically access all exterior and interior parts of the property and amenities. Housing May be required to live on site. Housing discount will be dictated by ownership allowances. Utilities, phone and cable TV not included. Physical Demands Medium (occasional up to 25 pounds) – Climb stairs, stoop, kneel, crouch, reach, handle, talk, hear and see. Able to work with various cleaning supplies without adverse reactions.

UFC GYM - - Responsibilities: Conducts a daily safety walk-through of the Facility to identify and address any immediate safety concerns.Works on special projects as directed by the General Manager and Operations Manager.Maintains the history file on all equipment.Procure repair parts, materials, t

Job DescriptionTITLE: SUPPLY CHAIN ASSISTANT COORDINATORLOCATION: NORTH NEW JERSEY JOB SUMMARY:Seeking an energetic and dynamic team player to assist the Supply Chain Project Manager with supply chain and logistic functions for our Digital Network, specifically for the rolling stock warehouse in North New Jersey. This individual should have the technical abilities to read cut sheets & bills of materials to support the project and aggressive installation schedule. Daily operations includes warehouse support with inventory management, and inbound & outbound logistical operations. As directed, controls the impact of the complete range of activities from receiving, locating, picking & packing, kitting, dispatching and optimizing inventory levels for various products & material across warehouses and project sites. Scan bar code products in/out of inventory currently managed in MS Excel, and eventually an enterprise inventory management system. The position will require use of forklift to load/unload trailers, containers, trucks, racks within warehouse. Breakdown pallets, assemble product (screens & prefabricated kits) into carts, label and coordinate shipments and at times, requires deliveries to various warehouse locations and project sites using company vehicles, pickup truck and box truck. ESSENTIAL FUNCTIONS:Coordinate/Prepare shipment of products and Kits for digital screen deployments – ensure precise record keepingManage shipping to deployment destinationsOrganize logistics for shipments and deliveriesQuality control of deliveries as they arriveSupport RMA process for failed units/parts as needed – track to conclusion Load/Unload trailers, trucks for both deliveries and shipmentsOperate Forklift (certification a plus, but will train for certification)Drive box truck in/out NYC to project sites and warehousesScan products in/out of inventorySupport Quarterly/Year-End warehouse audits as neededWork in warehouse environment as necessaryWork cross functionally with field teamPHYSICAL/MENTAL DEMANDS, ENVIRONMENT:Lifting up to 50 pounds and walking warehouses Driving in and out of NYC, to job sites and warehouse to warehouse (typically within NYC & state)MINIMUM QUALIFICATIONS: • Computer skills required: MS Excel, other MS Office Suite (Outlook, Word) a must, • Use of warehouse management tools a plus, • Extremely detail oriented and very organized, • Excellent verbal, written and interpersonal communication skills., • Ability to prioritize/handle assignments and deadlines., • Ability to handle the tasks associated with a very fast paced environment., • Clean driving record, • Team Player a must, • Non-standard work hours., • Willingness to learn additional computer skills and systems as neededEOE/AA

Job Description Responsible for the activities associated with product and service outsourcing, commodity management, supplier management and the material replenishment process. Integrating the links between Purchasing, Suppliers, and Internal Stakeholders. • Assist Manager in performing evaluation of supplier delivery and quality performance. Vendor assessments are completed on a quarterly basis on all key vendors. (Records management and analytical skills are critical on this task.), • Executes activities associated with the generation of purchase orders and manages the releases of blanket orders shipments from vendors. (Critical thinking, inventory management, and subject matter understanding are essential.), • Prioritizes and expedites open orders and late orders. Maintains and updates expediting list as required. (Analytical and problem-solving skills are requisite here.)., • Coordinates information with the Receiving department to resolve any discrepancies with shipment received from suppliers. (Communications and inventory management skills requisite)., • Arranges and processes returns to suppliers of deficient and or defective vendor parts. (This job responsibility requires interfacing with internal customers (Eng. & Quality) as well as summarizing the basis of our rejection of the vendor parts. As such, critical thinking, communication, and analytical skills all affect the execution of this tasking.)., • Obtains quotes in support of various customer bids, particularly those for repeat business with build-to-print US Navy contracts (e.g. MK44, M55, CCU126, etc.). Bid responses from vendors are then reviewed with supervisor prior to summary information being provided to Sales. (Critical thinking and decision making are essential skills with this job responsibility and require both an understanding of vendor/product history and ability to compare bid responses.), • Attaches identification data onto incoming shipment and stage items to await distribution., • Reviews packing slips to verify items received versus CAD Purchase Order, records required data and Quality certifications as required by purchase order., • Enters received item(s) into CAD's bill of materials file., • Checks inventory as required by bill of materials., • Performs work according to CAD policies, procedures, goals and overall department objectives. Maintains confidentially of all information. Subject Matter Understanding. Analytical. Records Management. Computer Applications. Inventory Management. Critical Thinking. Problem Solving. Decision Making. Communications Skills. Job Qualifications: Required: Bachelor's degree in Business or a related field or an equivalent combination of education and experience. Three or more years post degree experience in a Purchasing environment. Knowledge of Supply Management, Materials Resources Planning concepts and Material Replenishment processes. Knowledge of Microsoft Windows and Office Suite. Must pass the ATF Background check. Preferred: NAPM or APICS certification. Three to five years experience in a Purchasing, Materials or Operations environment. Familiarity with MRP ( JD Edwards) Business Systems. Performs related duties as assigned. Regular and consistent attendance is required

Job Description Who is Johnstone? Johnstone Supply is a wholesale distributor catering to professional HVACR contractors, offering the industry's largest selection of equipment and genuine OEM parts. With 11 locations across New Jersey, Lower New York, and Staten Island, we are dedicated to our work and believe in the power of growing together. By fostering partnerships with our employees, customers, and the community, we help each other thrive and achieve success. The HVAC Technical Trainer is responsible for delivering high quality technical training programs for HVAC contractors, technicians, and company employees. This role supports the company’s training initiatives by delivering classroom instruction, hands-on technical training, and assisting with the development of technical curriculum. What will you be doing as the HVAC Technical Trainer: • Deliver HVAC technical training courses for contractors, technicians, and company employees., • Conduct classroom presentations, hands-on training sessions, and technical demonstrations., • Assist in delivering manufacturer product training and certification courses., • Facilitate training sessions both in person and through online training platforms when required., • Maintain a professional and engaging training environment that encourages participation and learning., • Assist the Training Manager in developing HVAC technical training curriculum., • Create and maintain training materials including PowerPoint presentations, lab exercises, technical guides, and demonstration materials., • Help update training programs to reflect new products, technologies, and industry best practices., • Participate in curriculum development meetings and planning sessions., • New Jersey Master HVAC license preferred, • Minimum of five years’ experience in HVAC installation, service, or technical support., • Strong understanding of residential and light commercial HVAC systems., • Ability to clearly explain technical concepts to technicians and contractors., • Strong presentation and public speaking skills., • Experience creating training materials such as PowerPoint presentations preferred., • Experience delivering technical instruction or leading group training sessions preferred., • Strong troubleshooting and diagnostic skills., • Proficiency with Microsoft Office including PowerPoint., • EPA Universal certification preferred., • Paid Time Off (PTO) – 3 weeks of PTO for individual contributors and 4 weeks for leaders, • Safe Harbor 401(k) – 100% employer match up to 5% of base pay and immediately vests, • Holiday pay – we recognize and pay our employees for 7.5 holidays per year, • Employer subsidized medical, dental, and vision plans., • Employer paid life insurance and long-term disability, • Voluntary short-term disability, accident and critical illness insurance, • 24/7 Access to virtual care/telehealth options, and Parental Time Off, • Flexible spending accounts (FSA), • $100 wellness reward for completing annual health check-up, • Employee Assistance Program (EAP) for you, and your family, • Coverage for chiropractic, acupuncture, and massage therapy services, • Tuition reimbursement, up to $5,250 per year, • Employee referral bonus program – earn up to $4,000 per year, • Employee service milestone recognition program, • Employee discounts on products & retail discounts, • Variety of incentive plans for employees, • Bi-weekly pay days on every other Friday, • Opportunity to apply for the John M Shank Memorial Scholarship Fund, available to both Johnstone employees and children of employees

Job Description Now Hiring: Procurement & Readiness Manager Location: Remote Schedule: Full-Time, Monday - Friday (7:00 AM - 4:00 PM) + weekends as needed Department: Operations/Supply Chain Join our Team at Precision Garage Door! We’re looking for a results-driven Procurement & Readiness Manager to support our growing enterprise across multiple locations. This role is critical to ensuring our technicians have the right parts at the right time - driving efficiency, reducing delays, and improving overall field performance. You’ll play a key role in strengthening procurement execution, improving inventory alignment, and supporting installation readiness across the business. If you’re someone who thrives on building structure, improving processes, and making a direct operational impact, this is a great opportunity to step into a high-visibility role. Key Responsibilities • Standardize ordering practices across all locations, • Ensure consistent use of approved vendors and procurement channels, • Maintain optimal inventory levels for high-velocity parts, • Reduce special-order dependency through proactive planning, • Partner with operations teams to support installation readiness, • Track vendor performance, pricing, and fulfillment reliability, • Drive adoption of procurement programs (Neighborly/ProTradeNet), • Improve visibility and consistency across inventory and purchasing processes Required Qualifications • 7-10+ years of procurement, supply chain, or inventory management experience, • Experience supporting multi-location or enterprise operations, • Strong systems experience (ServiceTitan preferred), • Strong organizational and process-driven mindset, • Proven problem-solving ability in fast-paced environments, • Experience implementing cost-reduction strategies and improving cost efficiency, • Ability to plan and execute effective procurement strategies, • High level of integrity and transparency when working with vendors and suppliers, • Ability to travel up to 50% to support enterprise locations Bonus If You Have: • Experience in home services, building materials, or industrial distribution, • Familiarity with procurement platforms such as ProTradeNet or Neighborly, • Experience improving inventory systems and purchasing workflows at scale Why Work with Us? • Competitive salary: $75,000 - $80,000 annually, • Annual bonus potential based on company performance, • Full benefits package (medical, dental, vision, 401k, PTO), • Opportunity to make a direct impact on a growing, multi-location business, • High-visibility role with leadership exposure Reporting Structure • Reports to: Chief Operating Officer, • Partners with: Director of Systems & Administration Ready to schedule your next career move? Apply today and help us build a stronger, more efficient operation across our growing network.

Job Description Nielsen Dodge is looking for a Body shop Tech to join the team! This position is responsible for performing vehicle repair as assigned in accordance with dealer and factory standards. What We Offer: • FREE COLLEGE OPPORTUNITY! Online or in-person with Strayer University!, • Employee discount plans on purchases and services, • Health, dental and vision insurance, • Life insurance, • 401k retirement account, • Performs work as outlined on repair order with efficiency and accuracy., • Communicates with Manager to obtain the needed parts., • Examines the vehicle to determine if additional safety or service work is required., • Advises Body Shop Manager if additional work is needed., • Documents all work performed as the job is completed., • Ensures that customer cars are kept clean., • At least two years automotive experience., • Auto prep and refinish experience a plus., • Valid Driver’s License required. V0yqBjnbDJ

Job Description Branch Manager – HVAC Division Russo Bros | East Hanover, NJ Compensation: $120-135,000 + up to a 40 % Bonus Eligibility Join Our Winning Team! At Russo Bros. & Co., we believe great service starts with great people. For decades, we’ve built our reputation on quality work, strong teams, and a commitment to doing things the right way. Today, we continue to invest in our employees—offering stability, growth, and a team environment where you’re more than just a number. Why You’ll Love Working Here • Lead at Scale: Guide a multi-million-dollar HVAC operation with top-tier technicians and leaders., • Impact & Autonomy: Full P&L ownership, KPI accountability, and strategic growth responsibility., • Customer-First Culture: Deliver same-day service with excellence and integrity., • Career Development: Leadership training, clear advancement pathways, and cross-brand collaboration., • Build and execute annual/quarterly business plans aligned to revenue, gross margin, and EBITDA goals., • Drive growth through capacity planning, pricing discipline, add-on services, and market expansion., • Manage budgeting, forecasting, and KPI cadence; course-correct with data-driven action plans., • Recruit, develop, and coach service managers, field supervisors, and plumbers; build a performance culture., • Partner with leadership on onboarding, safety/OSHA compliance, technical training, and career pathways., • Ensure world-class customer experience (speed to schedule, conversion, NPS/CSAT, callbacks reduction)., • Strengthen parts/vendor relationships and inventory controls to improve first-visit completion., • REQUIRED: 5+ years of leadership in residential HVAC service (field and ops)., • Proven success managing P&L, KPIs, and (ideally) multi-site or high-volume operations., • Excellent communication, coaching, and change-leadership skills., • Proficiency with Microsoft Excel; ServiceTitan (or similar FSM/dispatch) experience strongly preferred., • Bachelor’s degree in Business or related field preferred., • Inspire teams and raise the bar on safety, quality, and customer care., • Love using data/KPIs to drive decisions and continuous improvement., • Thrive in a fast-paced, growth-focused environment and lead with urgency and integrity. EOE

Job DescriptionSummary Our health and human services agency client in Nutley, NJ, is seeking a Director of Outpatient Behavioral Health Services. This pivotal role will be vital in providing oversight of their mental health and substance use disorder outpatient program. This role ensures the agency's mission, values, and treatment philosophy are integrated into daily operations, with a focus on staffing, client care, compliance, and financial management. This position requires an LCSW, an LCADC, and previous supervisory experience. They will not be responsible for carrying a client load. The target salary range for this position is around $105,000. The position is expected to be in the office Monday through Friday. About the role What this position will focus on: Managing their services This person will oversee the agency's daily operations for its mental health and substance use disorder services. This person will oversee all aspects of the group, including both clinical and business matters. This will encompass all aspects of revenue, budgeting, hiring, and personnel management. Building a practice This position will further develop the organization's behavioral health practice and build on what is already in place. This includes recruiting additional referral sources and clients. This person will also have the opportunity to expand into other counseling services. Being the clinical supervisor This position will manage clients' clinical treatment and ensure operational compliance with state and federal regulations. This includes auditing documentation, intake and termination processes, and treatment planning. Critical parts of the job • Provides oversight of the program staff to ensure successful program delivery across outpatient mental health and substance use disorder services., • Provides full administrative oversight of outpatient behavioral health services, including planning, directing, and managing program operations such as staffing, fiscal management, reporting, and service delivery., • Oversees and manages clinical treatment, including documentation, compliance, and operational flow of clinical services. This includes oversight of intake operations, assessment, service planning, and termination processes, as well as coordination of care with internal and external programs to ensure continuity., • Ensures that all mental health and substance use services are evidence-based and aligned with recognized treatment principles and best practices, including treatment of co-occurring disorders., • Assures the integration of the mission, values, and treatment philosophy of the agency into daily operations., • Ensures agency compliance with all Federal, State, County, and City regulations, including NJ DHS/DMHAS requirements, program requirements, and accreditation standards., • Oversees facility operations to ensure compliance with safety, building, fire, and regulatory requirements., • Assists with any accreditation process., • Leads Outpatient quality assurance measures and oversees a comprehensive quality assurance and performance improvement program. Participates in the identification of quality care indicators, outcome objectives, and the collection and review of data to monitor clinical staff and program performance., • Participates in the Org PQI Team, Risk Management Team, and Client Advisory Board., • Ensures development, implementation, and enforcement of clinical policies & procedures to meet regulatory standards, including those specific to substance use disorder treatment services., • Ability to write and assist with developing new policy and procedures when needed., • Ability to assist with curriculum creation and implementation., • Ensures substance use disorder counseling services are delivered in accordance with NJAC 10:161B standards, including program structure, service delivery, documentation, and clinical supervision requirements., • Monitors program outcomes, including utilization of NJSAMS data where applicable, and implements improvements based on findings., • Ensures services address priority populations and support timely access to care or appropriate referral., • Ensure clinical staff complete necessary paperwork, adhere to established supervision requirements, and maintain proper documentation for recordkeeping., • Ensures that assessment, diagnosis, and treatment are provided by appropriately trained and qualified staff, and that clinical supervision is provided in accordance with regulatory standards., • Directly supervises the Assistant Director, clinical staff, and interns., • Oversees hiring processes, including credential verification, background checks, and staff qualifications. Ensures staff licensure and credentialing compliance., • Provides clinical orientation training to new clinical staff and supports ongoing staff development, education, and training., • Carries a small clinical caseload (if needed)., • Responsible for planning and budgeting for the provision of mental health and substance use counseling services., • Participate in Billing Team meetings and assist the Executive Director and the Business Operations Manager in conducting utilization reviews with the Billing Department to coordinate clinical and billing issues and support revenue cycle integrity., • Establishes and maintains relationships with community providers, referral sources, and stakeholders., • Assists the Executive Director with community outreach, partnership development, and new client acquisition., • Additional responsibilities as assigned by the Executive Director or as needed by the organization.Skills, Education & Abilities The Must-Haves • A self-motivated thinker and doer who can work independently and with a team., • Relentless attention to detail., • A curious and inquisitive mental health clinical supervisor who can understand and navigate a constantly evolving and dynamic environment., • A thoughtful and talented communicator willing to assist management, employees, and community members in navigating the complexity of the everyday clinical operations of the organization., • Ability to juggle a few competing priorities and be flexible to changing goals and demands on your time.Qualifications, • An LCSW and an LCADC are required., • A Clinical Supervisor Certification is required. An SIFI certification is a plus., • Minimum of 2 years post-licensure supervisory/management experience in a substance use disorder treatment setting., • Minimum of 5 years of experience in mental health and/or substance use treatment, including co-occurring disorders., • Demonstrated experience overseeing or managing substance use disorder programs required., • Required experience with NJSAMS reporting systems and ASAM placement criteria., • Experience with program development, budgeting, and billing required., • Strong knowledge of NJ regulatory requirements, including DHS/DMHAS standards., • Understanding of the organization’s mission and culture and the ability to maintain appropriate boundaries with staff and clients in all circumstances., • Program development, evaluation, solid organizational skills, and public speaking., • Strong written and oral communication skills., • Commitment to maintain confidentiality., • Awareness and sensitivity to the cultures represented by the organization., • Good interpersonal skills, ability to relate and work well with people from a variety of socioeconomic and cultural groups., • Excellent organizational skills to handle multiple priorities while remaining professional and calm., • Ability to organize and prioritize both their tasks and their staff., • Ability to be accurate, even at a fast pace and high-volume level of work, • Ability to work independently and be self-directed and flexible., • Ability to perform functions with minimal supervision. The Nice to Haves, • Ability to write and assist with developing new policy and procedures, • Ability to assist with curriculum creation and implementation., • Proficiency in computer skills, especially using agency electronic health records, Outlook, Word, Excel, and customized databases. They have been a steadfast force in community outreach for over 100 years and are now focused on mental health counseling, social service programs, and community outreach initiatives to individuals and families in Northern New Jersey. Converge HR Solutions and our clients provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR Vq9h4lG4oI

Job Description Here at The Arc Gloucester, we offer the unique opportunity to combine your professional experience with your passion to help individuals with intellectual or development disabilities For almost 70 years, The Arc Gloucester has provided innovative programs and services to individuals with intellectual and developmental disabilities. We have made a difference in the lives of many people and are very proud of that. But it's the individuals we service who bring our programs to life with their creativity, excitement, humor, talent, and so much more! Benefits: The Arc Gloucester offers a comprehensive compensation package that includes healthcare benefits (group medical, dental and vision plans), pet insurance, employer contribution retirement plans, and time off benefits, including paid time for vacation, personal, sick, Holiday pay, jury duty & bereavement. Employees are also eligible for tuition discounts at select local colleges. Excellent Benefits Package: • Competitive pay, • Referral Bonuses, • Health Insurance (Medical, Dental, Vision), • Pet Insurance, • Paid Time Off, • Holiday pay Position: Full-time (40 hours per week), exempt. Typical hours are from 8am – 4pm. Some flexibility is required, including scheduled rotating on-call, weekends and evenings. Due to the essential nature of this position, the facilities manager is required to be on-call, as needed. While performing the duties of this job, the employee occasionally works near moving mechanical parts and in outside weather conditions and is occasionally exposed to wet and/or humid conditions. This position reports to the Chief Operations Officer (COO). This position is supervised by the COO. This position supervises Maintenance workers. Essential Duties and Responsibilities: The following bullet points are from the maintenance worker position recently revamped: • Ensures that work sites operate safely and in compliance with OSHA requirements, • Follows established safety regulations, policies & procedures, • Obtains and analyzies quotes from vedors, • Conducts and performs tasks including painting, structural repairs to masonry, woodwork and furnishing of buildings, plumbing and electrical, • Performs ground maintenance activities, including mowing, trimming, wedding, raking, disposal of leaves and debris, • Performs Snow removal activities, including shoveling, plowing, salt, sand, etc, • Assists with implementing a preventive maintenance schedule, • Ability to adjust to work procedures and work schedules to meet production schedules, including availability for special events as assigned, • Works along with other facility/maintenance workers, internally and external contractors to coordinate activities and ensure timely completion of tasks, • Maintains accurate daily log of mileage and gas purchases when using agency vehicles, • Maintains accurate records of jobs completed at each location, • Assist with the agency’s plans, budgets, and schedules for facilities modifications including cost estimates, bid sheets, layouts, and contracts for construction and acquisitions, • Inspects construction and installation progress to ensure conformance to established specifications, • Assists with the oversight of the coordination of building maintenance required to be completed by subcontractor(s), • Requisitions/purchases required tools, equipment (including personal safety equipment) and supplies; updates and maintains a current inventory, • Inspects completed work by other workers for conformance to blueprints, specifications, and standards, • Establishes and adjusts work procedures and work schedules to meet production schedules, including worker availability for special events as assigned; delegates work accordingly, • Suggests changes in working conditions and use of equipment to increase efficiency of work crew, • Analyzes and resolves work problems, or assists workers in solving work problems, • Maintains time and production records. Develops and implements a preventive maintenance schedule, • Primary department, work location and schedule may vary., • Maintain confidentiality, • Comply with the DDD Program Manual, The Arc Gloucester Policies and Procedures Manual and applicable state, local and federal regulations & policies, • Must cooperate and participate in reviews, investigations, and inspections, including but not limited to DHS Licensing and DHS staff., • Complete and maintain required training, • Associates Degree (AA) or equivalent from a two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience, • 2 years of related experience and training, including Carpentry, Plumbing, Electrical, HVAC and Roofing, equivalent experience for degree, • Knowledge or experience with supporting individuals with intellectual and developmental disabilities is preferred, • Must have a current, non-probationary driver’s license with 5 points or less, and deemed acceptable to drive by The Arc Gloucester’s liability insurance company, • Proficient in basic computer, math, reading comprehension and verbal and written communication skills, • Successfully pass initial and ongoing State/Federal Criminal Background checks, including but not limited to Fingerprinting, CARI checks, Central Registry checks, MVR and drug screens, • Certified in CPR/First Aid While performing the essential functions of this position, the following are required, with or without reasonable accommodation: • Ability to stand, sit, walk, climb or balance, stoop, kneel, drive, crouch, or crawl for extended periods of time, • Ability to use hands to handle or feel objects, tools, or controls and reach with hands and arms, • Ability to operate a computers, phone and other relevant technology, • Physical duties, including but not limited to carrying, driving, general lifting (at least 50 lbs, occasionally up to 100 lbs.), assisting with transferring and lifting of individuals, pushing and pulling (resistance of at least 50 lbs.), bending, twisting, squatting, cleaning, and climbing stairs, • Ability to hear, taste, smell and vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus

Job Description AST and Marchesini Group USA have recently announced a strategic partnership, combining the expertise, technologies, and global reach of two highly respected industry leaders. AST is posting this role on behalf of Marchesini Group USA and this role is a full-time, onsite position based in New Jersey. Marchesini Group USA is seeking an Experienced Sales Manager to generate and handle sales for our Pharmaceutical R&D and Laboratory Equipment line of packaging machinery. Who We Are: Marchesini Group USA is a leading supplier of primary and secondary packaging solutions to the pharmaceutical, biotech, and cosmetic industries. Established in 1992, our 23,000-square-foot North American headquarters supports the USA, Canada, and parts of the Caribbean and is backed by 2,500 Marchesini staff members worldwide. Our modern facility is equipped and staffed to meet the ever increasing demands of today’s sophisticated and quality-conscious packaging clients. In today’s high-tech global marketplace, you need the right people and a commitment to providing the highest level of innovation, craftsmanship, reliability, and service. Our years of collective experience are at the service of our clients every day. Every member of Marchesini Group USA is here to satisfy our clients’ packaging requirements in the most effective way possible. Our sales team comprehensively analyzes and defines the customer’s packaging requirements to translate technical challenges into effective unique packaging solutions. By combining the most-advanced technology with our knowledge and understanding of the pharmaceutical, cosmetic and consumer products industries, we have made solving packaging challenges our specialty. All precision packaging machinery available through Marchesini Group USA has been manufactured to meet the highest level of quality certification using established production benchmarks and testing procedures. No single element of our business is as important to our reputation and our success as quality…and it has never been compromised. Responsibilities And Essential Functions: • Develops, generates and manages sales activity for Pharma R&D and Laboratory sector customers., • Manage and generate sales activity for large key accounts as well as small to mid-size customers., • Executes the complete sales cycle from initial contact onwards., • Creates and maintains strong working customer relations., • Maintains and manages customer database and reports in CRM., • Sales forecast planning., • Drives growing sales in expanding market., • Provide timely and accurate reports as required., • Initial sales area to cover the whole of North America. The Person: Pivotal Experience & Expertise • Functional Experience: Brings strong commercial experience. Demonstrates an independent, results-driven work ethic. A self-starter and team player who is motivated to succeed. Superior people/customer relationship skills as well as strong interpersonal skills., • Industry Experience & Tenure: 3-5 years’ broad experience and knowledge of pharma processes and packaging equipment. Brings strong network connections and relationships., • Business Acumen: Understands business implications of decisions. Displays orientation to profitability. Demonstrates knowledge of market and competition. Aligns work with strategic goals. Competencies: • Adaptability: Adapts to changes in the work environment. Manages competing demands and changes approach or method to best fit the situation., • Collaboration and Teamwork: Balances team and individual responsibilities. Contributes to building a positive team spirit., • Customer Service: Focuses on serving customers as the organization’s top priority. Understands needs, creates distinctive value, and builds meaningful relationships. Aligns organization and resources to deliver on customer commitments. Driven to create value for customers., • Expert Communication: Excellent verbal and written communication skills. Responds promptly to customer needs to meet commitments., • Innovation: Displays original thinking and creativity and meets challenges with resourcefulness., • Learning: Curious, open-minded and an avid listener who welcomes broad input, criticism and feedback., • Motivation: Sets and achieves challenging goals. Demonstrates persistence and overcomes obstacles and measures self against standard of excellence., • Planning/Organizing: Prioritizes and plans work activities while efficiently managing time., • Problem Solving: Identifies and resolves problems in a timely manner. Gathers and analyses information skillfully and develops alternative solutions., • Strategic Thinking: Develops and implements strategic priorities to achieve organizational goals. Understands organization's strengths & weaknesses. Analyses market and competition and identifies external threats and opportunities. Adapt strategy to changing conditions., • Paid Time Off, • Paid Holidays, • Pension Plan, • 401(k) Plan, • Medical, Dental, And Vision Insurance, • Short- and Long-Term Disability Insurance, • AD&D Insurance, • Life Insurance, • Employee Assistance Program, • Applicants must have a pre-existing legal US work status. Will not sponsor visas., • Travel 40%+ Additional Language Knowledge: Not required but always a plus! ITALIAN/SPANISH LANGUAGE Salary: $67,000-$70,000 plus commission Powered by JazzHR PNZEMzONwu

Job DescriptionBenefits: • Opportunity for advancement, • Paid time off, • Training & development Kitchen Tune-Up and Bath Tune-Up Bloomfield are growing fast. We're the premier kitchen and bathroom remodeling company serving Essex, Morris, and Passaic counties and we need an organized, detail-driven Operations Coordinator to keep projects running smoothly from sale to completion. You'll be the operational backbone the person who makes sure nothing falls through the cracks. If you thrive on managing multiple moving parts, communicating with homeowners and crews, and keeping a remodeling operation on schedule, this role is for you. WHAT YOU'LL DO Scheduling & Coordination: • Manage master job schedules across kitchen and bathroom projects, • Coordinate installers, deliveries, trades, and templating dates, • Confirm timing with homeowners before each milestone, • Update project status in JobTread and GoHighLevel in real time, • Manage invoicing, collections, and payment tracking, • Coordinate service calls and customer follow-upsMaterials & Vendors:, • Track orders, delivery dates, and job readiness, • Manage inbound/outbound inventory receiving, staging, verifying, • Coordinate countertop templates, fabrication, and installs, • Ensure correct materials are onsite before work begins, • Manage vendor payables and supplier relationshipsProject & Customer Support:, • Prepare job folders, binders, and measurement sheets, • Track milestones, change orders, and punch lists to completion, • Communicate proactively with homeowners updates, confirmations, next steps, • Capture job photos, documentation, and survey scores, • Flag delays or issues before they become problemsWHAT SUCCESS LOOKS LIKE, • No schedule surprises the team always knows what's coming, • Projects start with full material readiness, • Customers get timely, clear, professional communication, • Punch items close fast, final payments collected on time, • Project Manager has full visibility into every active jobQUALIFICATIONS Required: Strong organizational skills, clear communication, detail orientation, comfort with project management software, reliable transportation. Preferred: Home improvement or construction experience, trades scheduling knowledge, bilingual English/Spanish a plus. WHAT WE OFFER • $22$26/hr based on experience, • Full-time, MondayFriday, • Paid structured training, • Performance-based bonuses, • Year-round work no seasonal layoffs, • Growth path to Operations ManagerThis is a permanent position with a locally owned, nationally backed franchise that values quality, communication, and people who take pride in their work.

Job Description Groome's Catalyst Services division provides a variety of services to the natural gas-fired turbine industry, primarily to emissions reducing exhaust components and components within heat recovery steam generators. Our services are designed to maximize overall system performance and minimize future downtime. Groome's Mechanical Services division provides mechanical services in a variety of industries including power generation, manufacturing, aviation, and more. Our staff of certified welders, millwrights, boilermakers, ironworkers, pipefitters and others, are trained to install, repair, and maintain a variety of equipment using quality craftsmanship and attention to detail. We are proud to be "R" Stamp approved by the National Board of Pressure and Vessel Inspectors. Groome's Painting and Coating Services division provides services in various applications from large steel structures to complex concrete floors. We boast long-standing affiliations with both the Society for Protective Coatings (SSPC) and National Association of Corrosion Engineers (NACE). Groome's Explosive Services division uses explosives for industrial cleaning applications. Our experience for safely cleaning power generating and other heavy industry facilities is extensive and dates back over 40 years. Groome's Vac and Water Services division provides industrial cleaning, water & vac truck services nationwide. Our team uses automated hydro blast technology and offers the widest range of industrial vacuum truck services in the industry. In all endeavors, our goal is to provide our customers with quality and reliability, while always maintaining an emphasis on safety and customer service. About the Position Groome Industrial Service Group is seeking an Project Engineer. The ideal candidate will provide managerial and technical support to the sales, planning, and execution of projects executed by all Groome's divisions. Why work for Groome Industrial Service Group? • Health and Safety is our #1 priority 24/7/365!, • Competitive wages - the salary range for this position is $65,000 to $85,000 based on experience., • Paid time off, comprehensive health benefits coverage after 60 days of full-time employment., • 401(k) after the eligibility period with company matching component., • Opportunities for growth and development in your career., • Detailed review of quote and bid requests including mechanical drawings, pictures, and field notes/measurements., • Detailed review of preventative maintenance inspection reports and generation of formal PM reports., • Perform cost estimations and write specifications for quotes, bids, and reports., • Technical lead on projects, coordinate with operation's team to ensure proper project planning and performance., • Compose drawings of custom parts and equipment., • Regularly visit jobsites to ensure proper execution., • Provide sales and operations with technical support including onsite and offsite troubleshooting of any issues that arise., • Coordinate with QA/QC manager regarding project execution and report on successes and potential areas of improvement., • Occasionally attend trade shows, bid walks, and other events as a technical resource., • At least 0-5 years of engineering industry experience, • Bachelor of Science in Civil, Mechanical or Chemical Engineering (or similar) from ABET University, • Willingness to travel up to 50%, • Must have the ability to work a flexible schedule, including weekends, holidays, and late hours, when necessary., • Must have the ability to report to work on time and when scheduled., • Must have the ability to stand and/or walk for extended periods of time., • Experience with AutoCAD, Ariba and similar portals, CRM software, project management software is preferred · Report to Groome Denville office, full time, in-person For more information about our company, please visit . Groome Industrial Service Group is an Equal Opportunity Employer. E.O.E./M/F/Disability/Veteran

Job Description Looking for a new way of delivering quality chiropractic care? The right adjustment is all it takes. Here at The Joint Chiropractic, we’ve got your back. As one of our doctors, you will find that our unique operating model gives you all the support you need to focus on doing what you do best: looking after your patients. We support you with marketing, manage your insurance and deal with all of your business administration, as well as ensuring that you have the financial stability and security to think long term. Underpinning all of this is a clear set of values that drive every decision we make: trust, respect, accountability, integrity, excellence. It may feel like a big change, but the right adjustment is all it takes to start moving your career in the direction you want. On the path to ownership? Towards a better work-life balance? Or simply to concentrate on improving the quality of life for the patients who walk through the door. Whatever your goal for the future, you will quickly find that The Joint has the flexibility, agility, and commitment to help you achieve your aspirations. More and more chiropractors are discovering just what The Joint can do for their career. Join the Movement. The Opportunity: Flexible Part Time 20 hours per week or Full Time Mon-Fri 40 hours per week available Part time to Full time 20 to 40 hours per week $40 to $45 per hour plus performance bonuses Paid Holidays & PTO Paid Malpractice Uniform Allowance Responsibilities: • Consult with patients by reviewing health and medical histories; questioning, observing, and examining patients; and reviewing x-rays, as indicated., • Evaluate patients’ neuro-musculoskeletal systems and the spine using chiropractic diagnosis to determine neuro-musculoskeletal and spine related conditions., • Perform manual adjustments to the spine, or other articulations of the body, in order to correct the musculoskeletal system, where necessary., • Educate patients on the quality of life benefits of routine chiropractic care., • Provide a recommended course of treatment., • Maintain accurate case histories of patients., • Obtain and record patients' medical histories, as indicated., • Arrange for diagnostic x-rays to be taken, when medically necessary., • Analyze x-rays to locate the sources of patients' difficulties and to rule out fractures or diseases as sources of problems., • Patient chiropractic care and education, • Building positive doctor-patient relationships, • Maintaining accurate and timely patient records, • 4-year bachelor’s degree from an accredited college, • A Doctor of Chiropractic degree from an accredited chiropractic college, • Passing scores for Parts I, II, III, and IV from NCBE, • A recent NBCE SPEC exam is an acceptable alternative for Part IV, • Valid DC license in the applicable state, • Fully eligible for Malpractice Insurance in the applicable state About The Joint Chiropractic The Joint Corp. revolutionized access to chiropractic care when it introduced its retail healthcare business model in 2010. Today, it is the nation’s largest operator, manager and franchisor of chiropractic clinics through The Joint Chiropractic network. The company is making quality care convenient and affordable, while eliminating the need for insurance, for millions of patients seeking pain relief and ongoing wellness. With more than 700 locations nationwide and nearly 11 million patient visits annually, The Joint Chiropractic is a key leader in the chiropractic industry. Ranked number one on Forbes’ 2022 America's Best Small Companies list, number three on Fortune’s 100 Fastest-Growing Companies list and consistently named to Franchise Times “Top 400+ Franchises” and Entrepreneur’s “Franchise 500®” lists, The Joint Chiropractic is an innovative force, where healthcare meets retail. For more information, visit . Business Structure The Joint Corp. is a franchisor of clinics and an operator of clinics in certain states. In Arkansas, California, Colorado, District of Columbia, Florida, Illinois, Kansas, Kentucky, Maryland, Michigan, Minnesota, New Jersey, New York, North Carolina, Oregon, Pennsylvania, Rhode Island, South Dakota, Tennessee, Washington, West Virginia and Wyoming, The Joint Corp. and its franchisees provide management services to affiliated professional chiropractic practices. You are applying to work with a franchisee of The Joint Corp. If hired, the franchisee will be your only employer. Franchisees are independent business owners who set own terms of employment, including wage and benefit programs, which can vary between franchisees. Powered by JazzHR 4Esp64dW1J

Job Description The Director of Sales is responsible for leading and managing the sales organization to achieve revenue growth, market expansion, and customer satisfaction goals. This role involves developing strategic sales plans, overseeing execution, and ensuring alignment with overall business objectives. The Director of Sales will lead a team of Senior Account Managers and Account Managers, foster a high-performance culture, and collaborate cross-functionally with Technical Marketing, R&D, and Customer Service teams. This position will be responsible and accountable for the business results and the achievement of annual sales and profits targets for the U.S. region and Canada in line with strategic business development and growth plans. Key Responsibilities: • Responsible for developing Sales Strategies and Sales Plans. Ensures achievement of annual revenue and profit targets according to budgets for all sales territories in the region., • Plans and directs all sales activities (including Outside and Inside sales teams) in the region for the organization to achieve positive market growth year over year., • Supports sales team to identify and pursue new sales opportunities within current and potential growth accounts. Ensures effective Territory Development and Client Relationship Management practices, goals and targets for all Account Managers in the region., • Hire and staff the sales team appropriately based on geography, account specifics and revenue growth requirements. Ensures Account Managers continually improve number and quality of Sales Opportunity Pipelines and Meaningful Customer Interactions (MCIs)., • Act as a coach and motivator to the sales team, providing guidance on sales tactics, opportunity pursuit, contract negotiation and product and technical support., • Establishes annual targets and KPI’s for the sales team and evaluates their performance and achievements of goals., • Responsible for pricing and contribution margin management for all segment and customer pricing and approval of SQLs by Account Manager on the team., • Collaborate with the Technical Marketing Managers to ensure effective marketing communication to customers and to ensure a positive continued relationship with existing clients and to build relationships with new clients., • Prepares, analyzes, monitors, and presents sales forecasts and territory performance and sales achievement to management team and Board of Directors. Takes necessary actions to improve Sales Operations and results / outcomes., • Work with the Technical Marketing, Product Development and Operations teams regularly to support new and existing programs, manage response to quality and delivery issues, and help to improve overall customer responsiveness., • Coordinates, analyzes and proposes annual sales budget to the Leadership Team., • Identifies areas of product gaps in the market and feeds information to Technical Marketing, • Establish productive and professional relationships with senior level personnel at key customer accounts., • Negotiate and close agreements with strategic customers including supply agreements and term negotiations,, • Ensure the sales teams manage and meet requirements of Core Responsibilities (Customer Interactions, Timely Reporting, T&E expense management). Mentors, coaches and provides required feedback and need based training & development to all Sales Managers, • Prepare monthly reports related to sales volume, potential sales, areas of client expansion and other related statistical data. Ensures input is provided regularly to Account Managers to improve their results and outcomes., • Represents the company at trade shows to promote products and technologies. Qualifications: • Bachelor’s degree in chemistry / B.Tech in chemical engineering or scientific field preferred., • MBA preferred. Experience: • 12 to 15 years of experience selling ingredients produced for consumer products or regulated markets, preferably personal care (B2B background)., • 3 years of sales management experience preferred., • Experience developing and executing tactical and strategic sales plans including growth strategies and account objectives., • Business and financial acumen., • Demonstrated independent thinking and decision-making ability, • Strong planning skills with a 3-year time horizon. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. This is an environment with many interruptions. While performing the duties of this job, the employee may be occasionally exposed to work near moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually low. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Travel Requirements: Minimum 50% domestic travel. Overnight stays of one or more days are required.

Job Description EMPLOYMENT OPPORTUNITY WITH MARCHESINI GROUP USA Seeking an Experienced SALES Manager to generate and handle sales for our Pharmaceutical R&D and Laboratory Equipment line of packaging machinery. Who we are… Marchesini Group USA is a leading supplier of primary and secondary packaging solutions to the pharmaceutical, biotech, and cosmetic industries. Established in 1992, our 23,000-square-foot North American headquarters supports the USA, Canada, and parts of the Caribbean and is backed by 2,500 Marchesini staff members worldwide. Our modern facility is equipped and staffed to meet the ever-increasing demands of today’s sophisticated and quality-conscious packaging clients. In today’s high-tech global marketplace, you need the right people and a commitment to providing the highest level of innovation, craftsmanship, reliability, and service. Our years of collective experience are at the service of our clients every day. Every member of Marchesini Group USA is here to satisfy our clients’ packaging requirements in the most effective way possible. Our sales team comprehensively analyzes and defines the customer’s packaging requirements to translate technical challenges into effective, unique packaging solutions. By combining the most advanced technology with our knowledge and understanding of the pharmaceutical, cosmetic, and consumer products industries, we have made solving packaging challenges our specialty. All precision packaging machinery available through Marchesini Group USA has been manufactured to meet the highest level of quality certification using established production benchmarks and testing procedures. No single element of our business is as important to our reputation and our success as quality…and it has never been compromised. About the position… RESPONSIBILITIES AND ESSENTIAL FUNCTIONS: • Develops, generates, and manages sales activity for Pharma R&D and Laboratory sector customers., • Manage and generate sales activity for large key accounts as well as small to mid-size customers., • Executes the complete sales cycle from initial contact onwards., • Creates and maintains strong working customer relations., • Maintains and manages the customer database and reports in CRM., • Sales forecast planning., • Drives growing sales in expanding market., • Provide timely and accurate reports as required. Pivotal Experience & Expertise Functional Experience: Brings strong commercial experience. Demonstrates an independent, results-driven work ethic. A self-starter and team player who is motivated to succeed. Superior people/customer relationship skills as well as strong interpersonal skills. Industry Experience & Tenure: 3-5 years’ broad experience and knowledge of pharma processes and packaging equipment. Brings strong network connections and relationships. Business Acumen: Understands business implications of decisions. Displays orientation to profitability. Demonstrates knowledge of market and competition. Aligns work with strategic goals. Competencies: • Adaptability: Adapts to changes in the work environment. Manages competing demands and changes approach or method to best fit the situation., • Collaboration and Teamwork: Balances team and individual responsibilities. Contributes to building a positive team spirit., • Customer Service: Focuses on serving customers as the organization’s top priority. Understands needs, creates distinctive value, and builds meaningful relationships. Aligns organization and resources to deliver on customer commitments. Driven to create value for customers., • Expert Communication: Excellent verbal and written communication skills. Responds promptly to customer needs to meet commitments., • Innovation: Displays original thinking and creativity and meets challenges with resourcefulness., • Learning: Curious, open-minded, and an avid listener who welcomes broad input, criticism, and feedback., • Motivation: Sets and achieves challenging goals. Demonstrates persistence and overcomes obstacles and measures self against the standard of excellence., • Planning/Organizing: Prioritizes and plans work activities while efficiently managing time., • Problem Solving: Identifies and resolves problems in a timely manner. Gathers and analyzes information skillfully and develops alternative solutions., • Strategic Thinking: Develops and implements strategic priorities to achieve organizational goals. Understands organization's strengths & weaknesses. Analyses the market and competition and identifies external threats and opportunities. Adapts strategy to changing conditions. Software Proficiencies: Microsoft O365, including Excel, Word, OneDrive, Outlook, PowerPoint, SharePoint, Teams. Benefits: The well-being of our employees and their families is our top priority. Therefore, Marchesini Group USA offers a generous and attractive benefits packaging including: Paid Time Off • Paid Holidays • Pension Plan • 401(k) Plan • Medical Insurance Dental Insurance • Vision Insurance • Short- and Long-Term Disability Insurance AD&D Insurance • Life Insurance • Employee Assistance Program • Optional Identity Theft Protection Coverage Work Status Eligibility and Requirements: Applicants must have a pre-existing legal US work status. Will not sponsor visas. Travel 60%+ Additional Language Knowledge: Not required but always a plus! ITALIAN/SPANISH LANGUAGE Salary: $60,000 to $67,000 annually depending on experience + commission Powered by JazzHR ftlnyXuuzd

Job Description Assistant Plant Production Manager Rubber & Silicone Products has been a manufacturer of various rubber and silicone products for over 60 years. We are looking for a dependable individual who is willing to learn various manufacturing duties on our manufacturing floor, such as sandblasting, painting of manufactured parts and the operation of various manufacturing machinery. We are willing to train the right person. This is a full-time position, 40 hours per week, Monday - Friday from 7:50 am to 4:20 pm. JOB RESPONSIBITIES: • Will be trained in the operation of various manufacturing machines including CNC, Rubber Molding, and Urethane Machine.• Observe daily production and set up machines for different manufacturing processes• Inspect product constantly to maintain highest quality parts.• Maintain and handle tools and equipment used for production and quality procedures.• Record production output and machine efficiency. • Assist in operation of other machines and tasks which the business demands in other production areas.• Must follow all the safety procedures, company rules and regulations, use of dust masks, gloves, eye protection and other safety equipment.• Maintain clean work area, machine, tools and equipment. JOB QUALIFICATIONS: • Ability to handle physical workload to lifting up to 50 lbs.• Ability to work with hands and able to be on feet for workday• 5+ years of rubber molding• 5+ years of urethane molding• Mechanical experience preferred• Experience with CNC preferred

Job DescriptionRole Overview: The Maintenance Manager is responsible for overseeing all maintenance operations across the facility, ensuring equipment reliability, minimizing downtime, and supporting continuous production. This role leads maintenance teams, manages preventive maintenance programs, and drives improvements in equipment performance and operational efficiency. This position requires a hands-on leader with strong experience in manufacturing maintenance, troubleshooting, and team management, and the ability to support a dynamic production environment. Job Requirements: • 7+ years of experience in maintenance within a manufacturing environment., • 3+ years of experience in a leadership or supervisory role., • Strong background in mechanical, electrical, and industrial equipment maintenance., • Experience managing preventive and predictive maintenance programs., • Knowledge of production equipment, conveyors, motors, pumps, and automation systems., • Experience in troubleshooting electrical and mechanical systems., • Familiarity with OSHA regulations and safety compliance standards., • Experience leading and developing maintenance teams and technicians., • Ability to manage multiple priorities in a fast-paced environment., • Strong organizational and problem-solving skills., • Experience with CMMS systems and maintenance tracking tools preferred., • High school diploma required; technical degree or engineering background preferred.Personal Attributes / Skills:, • Strong leadership and team management skills., • Hands-on, solution-oriented mindset., • High attention to detail with a focus on safety and efficiency., • Effective communicators across operations, production, and leadership teams., • Proactive and adaptable in a fast-paced manufacturing environment.Physical Requirements:, • Ability to walk the production floor and oversee maintenance operations regularly., • Comfortable working around industrial equipment and manufacturing processes., • Ability to respond to maintenance issues and emergencies as needed.Key Responsibilities:, • Lead Maintenance Operations: Oversee all maintenance activities to ensure equipment uptime and operational efficiency., • Manage Maintenance Team: Supervise, train, and develop maintenance staff, setting performance expectations., • Preventive Maintenance Programs: Implement and manage preventive and predictive maintenance strategies., • Troubleshoot Equipment Issues: Support resolution of mechanical and electrical failures to minimize downtime., • Improve Equipment Reliability: Identify and implement improvements to increase equipment performance and lifespan., • Ensure Safety Compliance: Maintain compliance with OSHA standards and company safety policies., • Coordinate Projects: Manage equipment installations, upgrades, and facility improvement projects., • Track Maintenance Metrics: Monitor KPIs such as downtime, response time, and equipment performance., • Manage Inventory & Parts: Oversee spare parts inventory and maintenance-related purchasing., • Cross-Functional Collaboration: Work closely with production, engineering, and operations teams., • Perform other job-related duties as assigned. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job Description As an HVAC Service Manager, you will be responsible for overseeing and coordinating our service department to ensure the efficient and effective delivery of HVAC services. You will play a pivotal role in managing service technicians, assisting the dispatcher with scheduling, coordinating installations, and maintaining high standards of customer service. Key Responsibilities: • Manage a team of HVAC service technicians, providing leadership, guidance, and support to ensure optimal performance and productivity., • Assist the dispatcher with scheduling service technicians to customer locations for repair, maintenance, and installation jobs in a timely and efficient manner., • Monitor and prioritize service requests, ensuring that customer needs are met promptly and effectively., • Locate and order parts as needed for field staff., • Research and locate service manuals or troubleshooting instruction for a variety of equipment as needed. You will communicate with the field technicians directly and assist them as needed from the office., • Conduct regular performance evaluations of service technicians, providing feedback and coaching to enhance skill levels and job performance., • Oversee the implementation of safety protocols and ensure compliance with industry regulations and company policies., • Handle customer inquiries, complaints, and escalations, resolving issues promptly and professionally to ensure customer satisfaction., • Check technician notes for accuracy at the end of the day and directly communicate with field staff to ensure jobs are properly completed., • Proven experience in HVAC service management, with a minimum of 3 years of experience in a similar role., • Strong technical knowledge of HVAC systems, including troubleshooting, repair, and installation procedures., • Excellent leadership and communication skills, with the ability to motivate and inspire a team., • Proficiency in computer software applications, including Microsoft Office and HVAC service management software., • Solid understanding of safety regulations and protocols related to HVAC service operations., • Exceptional customer service skills, with a commitment to delivering a positive customer experience. Job Type: Full-time Pay: $50,000.00 - $130,000.00 per year Benefits: • 401(k) 4% Match, • Company truck, • Paid time off, • 8 hour shift, • Monday to Friday, • Overtime, • Weekends as needed

Job DescriptionDescription: The Production Planner is responsible for coordinating and planning operations to meet customer requirements and orders, with a particular focus on subassembly components. This role involves developing and maintaining production schedules to ensure seamless production operations. Key responsibilities include coordinating with various departments, managing resources, and ensuring production targets are met in a timely and cost-effective manner. The Production Planner utilizes various tools and software to forecast demand, plan production activities, and monitor progress effectively. Essential Job Responsibilities not limited to: 1. Analyze and report on inventory metrics to enhance impact on production: • Monitor the overall situation including materials transactions, materials in inventory, labor transactions, supply chain problems, customer forecasts, customer demands and market changes to make timely and accurate reporting to improve impact on production and achieve better results, • Build and monitor the production schedule to meet customer orders and make revisions as needed based on analysis and material availability in inventory and ERP, • Use market and competitive analysis to anticipate necessary production changes and propose revisions to meet customer orders, • Analyze and measure ERP inventory and inventory on hand and ensure ERP is accurate and reflects materials available to meet and improve production goals, • Work with relevant stakeholders to ensure continuous inventory shipments to meet production requirements., • Collaborate with the Production Manager to enhance efficiency through effective problem-solving., • Review Methods of Manufacture (MOM) item structures ensuring consistency and accuracy 2. Process Purchase Orders or Purchase Order Releases in ERP to procure raw material, parts, supplies, tools equipment and services to meet customer demands with respect to: • Direct material, • Subcontract material, • Indirect material supplies or services. 3. Identify what to buy • Analyze historical trends and sales orders to determine material requirements, • Analyze available inventory, material requirements and lead times to determine material to be ordered or released, • Review demands daily utilizing modules with consideration to cost, supplier and inventory level, • Obtain quotes from subcontractor suppliers for parts or services. Summarize, justify and present supplier selection for approval, • Read and interpret engineering drawings and other documentation needed to plan/purchase material and production requirements 4. Ensure material transactions are executed properly, accurately, and timely • Analyze and resolve Negative on Hand and Transaction History to monitor and maintain system effectiveness., • Resolve Invoice and Receiver discrepancies to ensure proper receipt of stock, • Work with QA and Suppliers to resolve material rejections. Obtain RMAs from Suppliers and ensure material transactions are complete 5. Plan, schedule and monitor production work orders for accuracy and proper execution for: • Job orders for contract work, • Job orders for work accomplished in other VMC departments, • Job orders submitted to subcontractors and suppliers, • Develop production plans to meet sales order and/or finished goods replacements, • Collaborate with production management to determine the resources required to meet the production plans, • Produce job orders to convert/process material within VMC operations and with suppliers, • Coordinate requirements between departments or warehouses that protect the production plan. Ensure that subassemblies produced in outside operations are delivered on time to support downstream operations 6. Monitor and maintain material item parameters in ERP • Based on parameters provided, detail and maintain reporting on the necessary stocking levels, • Update Bills of Materials (BOM’s) and Methods of Manufacture (MOM’s) in ERP system as required 7. Participate in the implementation training and usage of system software and any other software/hardware systems necessary to accomplish objectives • Proficient in Microsoft Office Suite, • Mathematical skills with respect to algebraic calculations, • Proficiency with ERP systems - Epicor, • Knowledge of material properties and manufacturing processes for decision making, • Use of sound judgment to prioritize and made decisions, • Critical thinking and creative problem solving, • Strong organizational and detail orientation skills, • Proven interpersonal skills, • Bachelor’s degree in business or related field, • 3-5 years Planner experience in production environment, • 2 years’ experience in lean manufacturing environment, • Proven ability to meet deadlines, • Exposure to Kaizen events or Six Sigma continuous improvement models a plus, • Experience working within ISO-9001 or equivalent quality management system, • CPIM a plus • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts, • Free uniforms, • Opportunity for advancement, • Training & development, • Upholding the Crunch Franchise core values of T.R.A.I.N.: Timely, Ready, Attentive, Inspiring, Noble., • Make reaching fitness goals achievable by assisting members and clients with education and guidance on comprehensive fitness programs including resistance and cardio-respiratory training, general nutritional guidelines, and nutritional product recommendations., • Meeting/exceeding minimum monthly company expectations including session service targets resulting in Personal Training revenue, supplement/nutritional product sales, and contributing to club success. Essential Duties & Responsibilities:The Personal Trainer is responsible for performing the following activities for the club: • Service and Train Clients [70% of time], • Create an outstanding initial personal training experience for introductory package clients, • Prepare and deliver comprehensive fitness programs based on clients goals that include appropriate exercise selection, nutritional programming and teaching a fitness lifestyle, • Inform clients of the fitness tools available to assist them in achieving their goals, • Set expectations and hold clients accountable to their comprehensive fitness programs through goal setting, follow up discussions, and tracking progress, • Demonstrate safe and proper exercise technique to clients, • Service Members [20% of time], • Instruct members on proper use of club equipment and exercise techniques, • Assist, at the club managements request, in any member service activities (e.g., fitness seminars, boot camps, body fat tables, supplement/nutritional product demos etc.), • Understand all aspects and benefits of the CAMP CRUNCH Orientation and deliver a positive fitness experience to members and guests, • Help with racking weights and assisting in maintaining a neat, organized and clean club, • Additional/Misc. [10% of time], • Design comprehensive fitness programs using company-provided tools (dotFIT), • Schedule all personal training sessions, other appointments, and administration time using company systems (ABC/Datatrak), • Trainer Business Plan execution Education Level: • High School Diploma or GED required, • Bachelors Degree preferred, • Current Cardiopulmonary Resuscitation (CPR)Certifications: (One or more of the following certifications), • American College of Sports Medicine (ACSM), • Certified Personal Trainer, • Health Fitness Specialist, • American Council on Exercise (ACE), • Personal Trainer Certification, • The Cooper Institute, • Personal Trainer Certification, • International Fitness Professionals Association (IFPA), • Personal Trainer Certification, • National Academy of Sports Medicine (NASM), • Certified Personal Trainer, • Corrective Exercise Specialist (CES), • Performance Enhancement Specialist (PES), • National Exercise and Sports Trainers Association (NESTA), • Personal Fitness Trainer Certification, • National Federation of Professional Trainers (NFPT), • Personal Trainer Certification, • National Strength and Conditioning Association (NSCA), • Certified Personal Trainer, • Must be able to lift 50 lbs., • Physical effort required for daily duties include lifting weights, squatting, bending, reaching, spotting, and prolonged standing and walking.Work Environment:, • While performing the duties of this job the team member is regularly exposed to moving mechanical parts., • Extended workdays are a frequent occurrence, as are weekends & holidays as needed to support the business.

Job DescriptionAt TerrAscend, we don’t just grow cannabis — we grow possibility. Whether it's cultivating top-tier flower, supporting patients with trusted therapies, or crafting premium products for adult use, we’re here to elevate lives. As a trailblazer in the cannabis industry, our roots run deep and our sights are set high. If you're ready to shape the future of cannabis with a team that believes in quality, care, and community — let’s grow together. As a Lead Cultivator, you will work within the Cultivation Department and report to the Cultivation Manager. You will assist the Cultivation Manager by carrying out day-to-day processes within the grow rooms and overseeing the daily activities of assigned cultivation team members, under the guidance and supervision of the Cultivation Manager. The tasks associated with this position include but are not limited to: crop tracking, crop documentation, performing crop production duties, labeling, cleaning, and training in accordance with the state of New Jersey regulations and TerrAscend policies and procedures. Responsibilities include, but are not limited to: • Responsible for increasing operational efficiency and reducing waste through ownership, teamwork, communication, and collaboration in your assigned room/area., • Responsible for overseeing your group assigned processes and capable of performing tasks hands-on in the grow/cultivation area., • Maintaining crop production schedule by ensuring adequate plant inventory., • Demonstrate and promote the company's vision and values., • Responsible for conducting SOP training and refresher training sessions for all team members who are assigned to your department., • Report all equipment, technical, or workload problems immediately to the Cultivation Manager., • Work during assigned hours and overtime, weekends, or holidays when necessary., • Remain in department until all work is complete each day., • Maintain cultivation environment (cleaning and sanitizing workspaces, consumables inventory, media inventory, etc.)., • Adhere to company health and safety policies; including eye protection, ear protection, uniforms, hand protection, and all other PPE., • Follow all company analytical and administrative Standard Operating Procedures (SOPs)., • Oversee daily activities of cultivation team members, under the guidance and supervision of the Cultivation Manager., • Report deficiencies to management., • Ensure 100% compliance involving proper data recording, product tracking, and security throughout all processes., • Ability to perform all Cultivator duties per the Cultivator job description on a daily basis., • Perform all assigned duties required to ensure a clean and safe grow facility., • Ability to thoroughly control and operate all cultivation equipment, including irrigation equipment, in a safe manner and environment., • Other duties as assigned needed/required to meet goals. Qualifications and Education Requirements, • EXPERIENCE & EDUCATION:, • High School diploma or General Education Diploma (GED)., • 1-2 years experience in a similar role or equivalent combination of education and experience., • Must be capable of leading a team and assisting them in job processes when/where required., • Knowledge of growing technologies, such as lights, irrigation, soil, nutrients, and more., • Knowledge of different cultivars and their unique growing demand., • Ability to execute techniques consistently., • Good documentation, inventory, and organization skills., • Ability to keep to a tight schedule., • Ability to maintain excellent punctuality and attendance., • Flexibility with hours and days – must be open to working weekends, holidays, and overtime when necessary., • Excellent verbal interpersonal communication skills to interact with team members., • Basic weights and measurement skills, ability to operate a scale., • Must be at least 21 years of age., • Subject to background check per state cannabis regulations. The physical demands, work environment factors, and mental functions described below are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Perks Rolled Just for You (for Benefits-Eligible Roles)

Job DescriptionJOB SUMMARY:This position will assist the Supply Chain Project Manager with the supply chain and logistic functions for our Digital Network. This includes office and warehouse support with inventory management, and inbound & outbound logistical operations. As directed, controls the commercial impact of the complete range of activities from receiving, locating, picking & packing dispatching, sourcing, purchasing and optimizing inventory levels for various products across warehouses and project sites. Scan bar code products in/out of inventory currently managed in MS Excel, and eventually an enterprise inventory management system. The position will require use of forklift to load/unload trailers, trucks, racks within warehouse. Breakdown pallets, assemble product onto pallets, label and coordinate shipments and at times, requires deliveries to various warehouse locations and project sites.ESSENTIAL FUNCTIONS: • Coordinate/Prepare shipment of products for digital screen deployments – ensure good record keeping, • Manage parts shipping to deployment destinations, • Organize logistics for shipments and deliveries, • Quality control of deliveries as they arrive, • Support RMA process for failed units/parts as needed – track to conclusion, • Load/Unload trailers, trucks for both deliveries and shipments, • Operate Forklift (certification a plus, but will train for certification), • Drive box truck in/out NYC to project sites and warehouses, • Scan products in/out of inventory, • Support Quarterly/Year-End warehouse audits as needed, • Work in warehouse environment as necessaryPHYSICAL/MENTAL DEMANDS, ENVIRONMENT:, • Lifting up to 50 pounds and walking warehouses are a part of this job., • Driving in and out of NYC, to job sites and warehouse to warehouse (typically within NY state) MINIMUM QUALIFICATIONS:, • Computer skills required: MS Excel, other MS Office Suite (Outlook, Word) a plus, • Very detail oriented and organized, • Excellent verbal & written communication skills, and strong interpersonal skills, • Ability to prioritize/handle assignments and deadlines, • Ability to handle the tasks associated with a very fast paced environment, • Team Player a must, • Non-standard work hours, • Willingness to learn additional computer skills and systems as needed

Job DescriptionJETSET Pilates General Managers are committed to the growth and development of their team and are passionate about sharing the brand and workout with others. The General Manager is a strong leader who is dedicated to cultivating relationships within the studio, as well as role modeling all of the qualities and attributes of an exceptional instructor. The General Manager is expected to undergo the JETSET Pilates training program and instructs an average of 8 classes per week. The expectation of the General Manager is that in addition to instructing 8 classes per week on average, they are in the studio during class times for a minimum of 25 classes each week. The General Manager is a multi-faceted role responsible for all aspects of studio performance, growth, and people management in the studio. They are accountable for ensuring that all areas of the business are fulfilled and are driven by achieving goals and continuing growth.Duties and Responsibilities • Work closely with leadership to manage day-to-day operations of the studio and implement company-wide strategies, policies, and procedures., • Ensure the delivery of positive customer service and a fitness experience consistent with the JETSET Pilates service standards., • Run reports and analyze metrics on key performance indicators, including sales, utilization, retention, expenses, and payroll., • Develop and execute local marketing initiatives to drive client acquisition and exceed studio-specific goals., • Ensure all client inquiries, issues, and concerns receive a positive and timely response., • Foster relationships with the local health, fitness, and wellness communities as well as key influencers and potential corporate partners., • Create, monitor, and maintain class and staff schedules., • Maintain inventory for supplies, retail, and beverages as needed., • Plan and host team meetings and social events., • Oversee hiring of instructors and studio leads and ensure career growth

Job DescriptionJETSET Pilates General Managers are committed to the growth and development of their team and are passionate about sharing the brand and workout with others. The General Manager is a strong leader who is dedicated to cultivating relationships within the studio. The expectation of the General Manager is that they are in the studio during class times for a minimum of 30 classes each week. The General Manager is a multi-faceted role responsible for all aspects of studio performance, growth, and people management in the studio. They are accountable for ensuring that all areas of the business are fulfilled and are driven by achieving goals and continuing growth. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.