Trabajos parts manager en Savannah, GeorgiaCrear alertas

This position is on site at our Headquarters in Savannah, Georgia Remote is not available Stacker – Screen Print Overview The stacker position is the entry-level position for the Screen Print Production Department. The person hired for this position will be responsible for stacking shirts neatly at the end of the dryer while keeping up with the pace of the machine, doing quality control checks the entire time, alerting operators and/or supervisors of any quality issues and assisting their assigned team performing cleaning, set-up and teardown duties needed throughout the day. Essential Functions Be able to work the scheduled hours and willing to work overtime if needed. Be present at assigned work station once clocked in. Do not leave the work station without first letting a supervisor know. Follow the policies and procedures of the department and company. Stack the shirts at the end of the dryer as they come out. Must not let shirts fall on the ground or in the bin. Must keep pace with the machine. Must stack shirts neatly and keep track of quantity and sizes on the provided paperwork. Must be able to stand in one place for several hours at a time. Must look for and find defects or flaws in the print and on the garment while stacking. Must be able to repair shirts that can be repaired using the tools and procedures given. Must alert operators and supervisors of any issues discovered while stacking. Must not cause damage to shirts in any way. This position requires the person to twist, turn and lift up to 40 lbs. Must learn the terminology used by department in order to communicate with operators and team members. This position requires employee to handle garments that are hot. Gloves can be provided if needed. This is a repetitive motion position. Clean work area daily. Remove test prints from the bins and stock into the front bins for operators to use as test prints. Sweep and pick up trash that accumulates throughout the day and at the end of the day. Wipe down surfaces around work area. Clean lint and debris out of bins at the back of the dryer. Assist operators with set-ups and teardowns between orders. Stage correct shirts for each order being set-up to be printed. Stage completed shirts at the correct machine to complete the order or designated area. Clean around machinery when instructed. This requires employee to wipe ink and adhesive off of the printing presses, work stations, ink buckets and other tools used during the shift. Be willing to cross-train in other positions or departments as needed. Competencies Team oriented. Communication. Attention to detail. Conscientious. Counting and recording data. Attendance during the scheduled work hours. Effort. Supervisory Responsibility This position is not a supervisory position unless employee is considered a systems expert and is assigned the role of trainer for that position. At which time, they will be given developmental responsibilities for trainees. This would include showing new employee how to physically perform the task, review essential functions, observe employee attempting the physical function, pointing out discrepancies with the performance of the functions, alerting trainee when issues are overlooked and informing their immediate supervisor of the progress. Work Environment This job operates in a warehouse manufacturing environment around heavy stationary equipment with moving parts and some material handling equipment. The environment can be warm at times with limited air conditioning and/or air flow. This environment can be dusty due to airborne lint from the garments and adhesives used to manufacture the garments. Some chemicals are used for cleaning that require gloves and safety goggles. There are odors generated from the products we use and produce that may be unpleasant on a daily basis. You will get ink, lint and adhesive on your skin and clothing. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is primarily required to stand; walk to designated areas to assist operators when instructed; use hands to stack shirts; use eyes to detect flaws with the print or garment being printed; talk or hear. The employee must occasionally lift or move garments or supplies, up to 40 pounds. Position Type/Expected Hours of Work This is a full-time position unless part-time hours are arranged prior to hiring. Days and hours of work are Monday through Friday, 6:00am – 2:00pm for 1stshift and 2:00pm – 10:00 pm for 2ndshift. This position regularly requires overtime hours, weekend work and some holidays depending on the workload. Travel There is no travel expected unless employee agrees to additional company-provided training off-site. This is not a standard practice. Required Education and Experience No experience or level of education is required for this position as long as the employee can perform the essential functions and competencies. Experience or additional education in any related areas are opportunities for advancement. Chain of Command This position reports to their assigned Line Supervisor. Their Line Supervisor reports to the Shift Supervisor. Shift Supervisor reports to Department Manager. Department Manager reports to the Chief Production Office

Aegis Worldwide is seeking an Asset Integrity / Reliability Manager to support a leading specialty manufacturer. This role will be responsible for developing and leading the Mechanical Integrity (MI) program strategy across all U.S. operations. The position oversees MI programs regulated under OSHA PSM and EPA RMP and requires strong technical expertise, strategic thinking, collaboration skills, and the ability to continuously improve MI practices. The Asset Integrity Manager reports to senior leadership within the Environmental, Safety, and Process Safety Management function. Responsibilities • Develop, implement, and lead companywide Mechanical Integrity (MI) programs., • Provide technical guidance and strengthen MI practices across multiple U.S. manufacturing sites., • Promote standardization of MI procedures, policies, and best practices to ensure consistent performance, reliability, and regulatory compliance, including adherence to RAGAGEP standards., • Collaborate with maintenance and engineering teams to manage inspection and maintenance activities, support procedure development, and oversee data tracking., • Partner with engineering groups on equipment specifications, relief system design, QA/QC processes for new installations, and validation of equipment and spare parts., • Develop and monitor key performance indicators (KPIs) for MI program effectiveness., • Conduct audits and gap analyses to identify vulnerabilities and support corrective actions., • Assist site teams during internal and external PSM/RMP regulatory audits., • Prepare and present MI-related updates and recommendations to senior management. Qualifications • Bachelor’s degree in Engineering required., • Minimum of 10 years of experience in mechanical integrity or related fields., • Experience developing MI programs within chemical or industrial manufacturing environments., • Strong knowledge of OSHA, EPA, and industry standards such as API and ASME., • Proven ability to collaborate with operations teams and build strong working relationships., • Excellent written, verbal, and presentation communication skills., • Experience working with senior leadership teams., • Highly motivated, proactive, innovative, and committed to integrity and teamwork., • Ability to travel up to 50% (may be higher depending on home location)., • Proficiency in Microsoft Word, Excel, and general computer literacy. Benefits • Competitive salary, • Medical, dental, and vision insurance, • Flexible spending accounts, • 401(k) savings plan, • Paid vacation and incidental days, • Paid holidays, • Life insurance, • Short-term and long-term disability, • Tuition reimbursement, • Employee development and training programs

Welcome! Interested in becoming a Ranger Read more. At RangeWater we look for people who show up and work together to achieve success and make positive impacts on the lives we touch and enrich the communities we serve as people are at the heart of everything we do. As a Ranger we encourage you to explore possibilities and solutions for your own career success story and apply the same enthusiasm to help RangeWater remain THE leader and powerful force in Multi-Family Real Estate. Our Team Members play a pivotal role in the success of the companys performance and we look forward to witnessing your successful journey as a Ranger! Culture: Companies with a strong culture and a higher purpose perform better in the long run. Core Values(words to live by): People-focused Collaboration Integrity Service Results-driven Experience-centric and Innovation. Whats in for you Our leaders care about the well-being of all Rangers and recognize the importance of work-life balance. Thats why we offer competitive paid time off and benefits. PTO/Benefits: Two Weeks of PTO Paid Holidays Medical dental and vision insurance 401(k) Enrollment Opportunity Employer Paid Basic Life and Short-Term Disability Paid Parental Leave for Birthing and Non-Birthing Parents (after 6 months) Potential opportunity for savings in rent (property and ownership specific) Cell Phone Allowance And more! Job Description What does this role entail The Maintenance Supervisor oversees and performs technical and mechanical work that ensures the inside and external buildings grounds amenities and common areas of the property meet the Companys standards for cleanliness appearance safety and overall functionality by performing maintenance related tasks. Essential Roles You Will Play: • Employee champion. Manages maintenance team and assists in employee evaluations. Interview hire orient and train new hires. Oversees all aspects of the Make Ready process from beginning to end in accordance with the company policies and procedures., • Assists with and completes work orders generated from resident requests for service as well as routine upkeep on the property by diagnosing the source or cause of the defect or problem and making repairs in accordance with established policies procedures safety standards and code requirements., • Periodically inspects work performed by other service team members in person to assess effectiveness of policies and procedures and develop corrective action plans as needed. Periodically inspects work performed by contractors vendors and other service providers to verify the work. Ensures materials and services meet quality standards scope and specifications as required. Maintains adequate inventory of spare parts and maintenance materials and works with Community Manager to order supplies and tools as needed to stay within budgetary guidelines. Assists Community Manager in developing the budget for maintenance and capital expenses. Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible not being wasteful with materials and supplies and practicing the correct use for tools and equipment., • Keep informed of changes in technology and industry standards., • Completes monthly Preventative Maintenance procedures as outlined in the Policy and Procedure Manual., • Demonstrates customer service skills by all interactions with Employees Residents Clients and Vendors., • Responsible for safety cleanliness and general appearance and appeal of property and reporting any mechanical and electrical equipment malfunctions as well as employee/visitor/resident injuries or accidents. Ensures property maintenance team complies with Companys standards regarding service requests. Conducts regularly scheduled RangeWater safety meetings documentation required is up to date inspections as needed and other safety related laws and requirements to ensure property compliance. Completes monthly Preventative Maintenance procedures as outlined in the Policy and Procedure Manual., • Resolve customer complaints and issues., • Other duties as assigned. Work Hours and Work Environment (may vary by state and location): Schedule: 40 hours in a regular work week. Typical Site Hours of Operation (may vary by site) Monday Friday: 9am 6pm Saturday: 10am 5pm Sunday: 1pm 5pm Essential Requirements Must be available to work on weekends when scheduled and must be able to perform the essential job functions unaccompanied. Maintenance Supervisors must be able to work a flexible work schedule which includes taking call during evenings weekends and holidays and must be able to perform the essential job functions unaccompanied. Works in frequent exposure to outside elements where temperatures weather odors and/or landscape may be unpleasant and/or hazardous. Qualifications Summary: To perform this job successfully the requirements listed below are representative of the knowledge skills and/or abilities required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions. Education and Experience: Education: High School Diploma or GED Equivalent. Working knowledge of OSHA standards and MSDS regulations. Technical degree is preferred. Supervisor Experience: 1 - 3 Years Proven skills sufficient to hire lead direct evaluate and manage subordinates and team members. Management: 1 - 3 Years Experience Preferred: 2-3 years of apartment maintenance experience or equivalent. Advanced Skills: Communication and Delivery Skills with ability to connect to people at all levels. Computer Skills: Proficiency in internet word processing spreadsheet and database management programs for reporting purposes. Strong proficiency in property management software (preferably Entrata Yardi and/or One Site). Licenses and Certificates Requirements: Licenses: Current Valid Drivers License Certifications: Maintenace Supervisors must have EPA certifications Type I and II or Universal for refrigerant recycling a valid Certified Pool Operator or a Certified Spa and Pool Operator certificate as well as all certifications required by State and Local jurisdictions. Physical Requirements: Weights Requirements: Must be able to push pull lift carry or maneuver weights up to twenty (20) pounds independently and fifty (50) pounds with assistance. Mobility Requirements: The employee is frequently required to stand walk reach with hands and arms climb stoop and squat. Intermittently required to sit and perform keyboard work. Travel Requirements: Routine local travel may be required to run business-related errands including but not limited to meetings and training. Non-local travel may be required for business-related responsibilities. Additional Information: RangeWater is a drug-free harassment free workplace and an equal opportunity employer. We embrace diversity and are committed to creating an inclusive environment for all employees. Qualified applicants will be considered for employment without regard to race religion gender gender identity sexual orientation national origin age disability or veteran status. Rangewater is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Required Experience: Manager Key Skills Robotics,HVAC,Packaging,CMMS,Maintenance Management,Property Maintenance,OSHA,Maintenance,Painting,Programmable Logic Controllers,Supervising Experience,Troubleshooting Employment Type : Full-Time Experience: years Vacancy: 1

Step into our legacy of serving working class families since 1951 providing life accident and supplemental health products to safeguard members of labor unions credit unions associations and their beloved families. We are seeking representatives who can forge long-term relationships with clients meeting them where they feel most comfortable: their homes through the convenience of Zoom Virtual Calls. About us: Proud Parent Company: Globe Life Remarkable growth of over 20% last year even during the pandemic solidifying our status as an essential business. Work Location: US/Canada Suggested Qualifications: Exhibit excellent communication skills ensuring clear and effective client interactions. Possess basic computer knowledge allowing for seamless virtual engagement. Showcase a strong work ethic committing to delivering exceptional service. Radiate an outgoing fun and energetic personality leaving a positive and lasting impression. Demonstrate exceptional time management skills ensuring productive and efficient work. Prior experience in leadership management is valued offering opportunities for growth and advancement. Benefits: Embrace the freedom of 100% remote work allowing you to work from the comfort of your own home. Enjoy the peace of mind that comes with weekly pay based on a suggested schedule designed for success. Unlock bonus structured contracts recognizing your exceptional performance. Prioritize your well-being with health insurance reimbursement ensuring youre taken care of. Secure your future with comprehensive life insurance coverage. Delight in the flexibility of a personalized schedule accommodating your individual needs. Plan for retirement with confidence as we offer a robust retirement plan. Benefit from renewals further rewarding your long-term commitment. All interviews will be conducted via Zoom ensuring your safety and convenience. Join us in our commitment to protecting families and become part of our enduring legacy. Submit your application today and embark on a rewarding work-from-home opportunity!We may use artificial intelligence (AI) tools to support parts of the hiring process such as reviewing applications analyzing resumes or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed please contact us. Required Experience: Manager Key Skills Arabic Speaking,Marketing & Promotions,Access Control System,Apache Tomcat,BI,Back Office Employment Type : Full Time Experience: years Vacancy: 1

Job Description The Front Counter position will assist pool builders and service professionals with purchasing pools parts, equipment and products as well as providing knowledgeable advice about the pool products and applications. • Pool industry experience required., • Greet and assist customers., • Accurately key in and pull orders to prevent inventory error., • Work with managers, sales force, and warehouse/drivers to ensure customer satisfaction., • Offer knowledgeable advice on substitutes, equivalent products, and/or product application., • Phone sales and call existing customers., • Advise customers of new products and techniques being introduced into the pool industry., • Responsible for receiving and posting payments to orders., • Responsible for maintaining cash drawer., • Coordinate with branch manager or purchasing agent to facilitate special orders., • Assist in stocking the warehouse as needed., • Process warranties, exchanges, and returns to stock assuring that product was purchased at your branch and is still under warranty according to the manufacturer guidelines or still in original packaging., • Attend new product training and seminars., • Answer and direct incoming calls., • Perform general housekeeping in the counter area including the bathrooms and remove trash daily., • Make coffee and change the water cooler bottle as needed., • Stock counter products and supplies. (Including products, coffee, water cooler, paper, and general janitorial supplies), • Performs other related duties as assigned. Must be able to pass a pre-employment drug test. Compensation commensurate with experience Our company benefit options include insurance (health, dental, vision, basic life, voluntary life and disability), 401(K) with company match and paid time off. Pool Equipment & Supply, Inc is an equal opportunity employer.

Job DescriptionSalary: 16.00 Job description JOB SCOPEDEPARTMENT: PARTS POSITION: PARTS SUPPORT (PICKER) Job Objective: Work with the parts sales team to serve as a parts picker. Receive and sort sales invoices and pick tickets by delivery and will call categories. Accurately pull parts from the warehouse to stage for will call, local delivery, and long-distance delivery. Be able to identify and manage priority tasks in assigned focus areas. Ensure parts are pulled accurately and any discrepancies are communicated immediately. Be reachable by radio at all times while inside the dealership. Hours: 8:00 a.m. to 5:00 p.m. M-F Reports to: Warehouse Manager Core tasks for which this job is responsible: Parts Support (Picker) • Monitor parts printer in assigned area(s). Sort and place pick tickets and invoices in appropriate bins based on local delivery, long distance, will call, etc., • Identify priority pick tickets and invoices based on established guidelines (separate document)., • Accurately identify and pull correct parts and quantities., • Place pulled parts in correct staging areas based on information on pick tickets or as directed by supported sales team. Staging areas include:, • Will call shelves., • Local delivery shelves., • UPS/FedEX shipping area., • Return pick tickets or invoices to applicable salesperson with parts status so final invoicing or corrections can be completed., • Be familiar with all Showroom parts and warehouse locations., • Return unsold/returned parts to correct warehouse locations when applicable., • Our Company is an Elite Support Dealer for Daimler. Assist in ensuring the Department meets all Elite Support standards., • Complete all assigned ARC training., • During times of personnel shortages, be prepared to be reassigned to warehouse support or to support other sections outside of what is established this job scope., • Assist Inventory Control Manager with cycle counting inventory. Overtime may be made available to conduct cycle counting., • Customer satisfaction, • Maintain a professional and positive attitude., • Pull parts quickly, efficiently, and accurately., • Always be aware of priority tasks and be able to flow from one task to another with minimal or no direction from others., • Perform all tasks in a safe manner using appropriate PPE and equipment correctly (e.g., gloves, forklifts, dollies, pallet jacks, etc.)., • Earn the trust of each teammate., • Safety, • Accuracy and timeliness of deliveries and pick-ups, • Teamwork and willingness to assist team members when appropriate, • High school diploma or equivalent, • Ability to occasionally lift heavy objects (50-100 pounds)., • Ability to maintain a fast pace for extended periods of time., • Valid drivers license with clean driving record, • Forklift certification or ability to become forklift certified

Job Description Job Title: HVAC Service Technician Status: Full Time, Non-Exempt (Eligible for overtime) Reports To: Service Manager or Manager of Technical Operations Work Schedule: Monday – Friday- based on customer needs Position Purpose: The primary purpose of the HVAC Service Technician is to provide preventative maintenance, start-up, warranty, and repair services on light commercial and industrial air conditioning equipment. Strong emphasis on customer service. This position may occasionally involve after hour call outs in order to provide emergency repairs. Hoffman Mechanical Solutions, Inc. is a company focused on being #1 in the HVAC industry in providing the most innovative HVAC solutions through superior design and customer service. HVAC Service Technician Essential Duties and Responsibilities: • Service a variety of HVAC products and equipment and ensure customer satisfaction., • Read and understand blueprints, equipment manuals, and engineering specifications in order to properly diagnose and repair units., • Use a variety of hand-tools and specialty equipment typical of the commercial HVAC Service trade., • Identify, analyze, diagnose, and repair systems and products at customer’s location., • Survey customer site for properly operating equipment and report any deficiencies found. Provide sales leads to internal associates as necessary., • Perform preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepare in advance for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials, and coordinating various trades for on-site work., • Diagnose/troubleshoot inoperable equipment and develop action plan for repairs and problem resolution., • Determine replacement parts required, secure materials, and complete repairs on a timely basis. Return any non-used or refundable parts for credit., • Interact face to face with customers to ensure proper and accurate communications exist., • Document all work performed by accurately completing field service reports, equipment log sheets, etc., • Complete and submit all required paperwork on a timely basis., • Operate and be diligent in properly caring for and maintaining a company vehicle., • Provide technical support to customers., • Flexible to work overtime/weekends as necessary in order to meet customer requirements., • Limited travel required but may include occasional overnight stays., • Stay informed on industry news and trends, products, services, competitors and relevant information about existing and emerging technologies, and the latest product-line developments. Attend company training seminars to become familiar with product lines., • Conduct oneself in a professional manner as a positive representative of the company both to the customer and public. Knowledge / Experience / Critical Skills • Education/Experience – Associate’s Degree or equivalent from a Technical / Trade School with a certificate in Heating, Ventilation, and Air Conditioning., • Minimum of Three (3) years related experience preferred., • Operational knowledge of computers and Microsoft Office software preferred., • Ability to read, comprehend, and write simple instructions and short correspondence. Ability to effectively present information in one-on-one and small group situations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole number, common fractions, and decimals. Ability to compute rate, ratio, and percentages. Ability to understand data presented in a graphical format such as pie charts, bar graphs, etc., • Ability to recognize problems and develop the most cost effective solution. Ability to collect data, establish facts, and draw valid conclusions., • Must pass pre-hire requirements including background check, motor vehicle report, and drug screening., • Must possess valid drivers’ license., • Must possess EPA mandated card for safe refrigerant handling. Universal certification preferred. Physical Demands • In order to properly perform the duties of this job, the employee is regularly required to stand, use hands in order to finger/grasp/handle/feel, talk, and hear. The employee frequently is required to walk, reach, stoop, kneel, crouch, and/or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. This positions requires close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions, Inc. No phone calls or drop-ins, please. EEO Employer/Vets/Disabled

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC SERVICE TECHNICIAN Job Responsibilities & Requirements HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED: • Medical Insurance, • Dental Insurance, • Paid Vacations 1nD2mq6xuJ

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Assistant & Service Managers Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Assistant and Service Managers to join Team Mavis at one or our state-of-the-art automotive service and retail tire sales centers in the Savannah, GA area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Assistant Manager As a future leader of Mavis, the Assistant Manager supports the Store Manager to ensure each Mavis retail location operates efficiently, safely and effectively. Using fundamental leadership skills, Assistant Managers are responsible for enforcing established policies, procedures and standards, scheduling mechanics/technicians' work, managing outside orders, ensuring the quality and timely completion of jobs, meeting customer expectations, and the safety of team members About the Position of Service Manager The Service Manager is responsible for assisting customers with tire selections and recommending necessary under-car repair services. In addition, to ensure complete customer satisfaction by delivering timely completion of high-quality vehicle repair and maintenance, Service Managers must direct the workflow of Mechanics, Alignment Technicians and Tire Technicians and stage vehicle repair/maintenance work. While driving the sales initiatives of Mavis, Service Managers must communicate directly with customers, assess customer needs, provide information regarding requested and/or necessary automotive repairs and maintenance, ensure customers are satisfied with their in-store experience and strive to meet customer expectations. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Assistant / Service Manager, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess (i) 1 year of experience and/or training in automotive parts and/or tire sales, (ii) 1 year of experience and/or training in automotive repairs/maintenance, or (iii) any combination of education, training, and experience which demonstrates the ability to perform the duties and responsibilities of the position. What are you waiting for? APPLY NOW! Candidates can apply online at . OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit . Mavis is an Equal Opportunity Employer Consistent with our commitment to the principle of equal employment opportunity for all individuals, we enforce a zero-tolerance policy on discrimination at Mavis. Employment decisions are made without regard to an applicant's or employee's actual or perceived race, color, religion, creed, sex, pregnancy, sexual orientation, national origin, age, ancestry, ethnicity, disability, citizenship, alienage, marital status, domestic or civil union partnership status, familial status, caregiver status, military or veteran status, transgender status, gender identity or expression, genetic information, predisposing genetic characteristic, status as a victim of domestic violence, stalking and sex offenses, or any other status protected by applicable federal, state or local laws, regulations or ordinances. Exceptions or modifications to certain job duties and/or expected schedules may be provided for an employee who needs a reasonable accommodation for: (a) a sincerely held religious belief, observance or practice that conflicts with the expected schedule for a position; or (b) an otherwise qualified individual with a disability, unless such accommodation poses an undue hardship on our business, in accordance with applicable federal, state and local laws. Additional information is available by contacting . We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operations of our business, in accordance with applicable federal, state and local laws. If you believe you require such assistance to complete this Application for Employment or to participate in the interview process, please contact our Employee Experience team at (914) 984-2500 ext. 5631. We also will endeavor to provide reasonable accommodation for a job applicant's or an employee's sincerely held religious beliefs, observances, or practices that conflict with a work requirement unless the accommodation poses an undue hardship to our business, in accordance with applicable federal, state and local laws. If you believe you require such an accommodation, please contact our Employee Experience team at (914) 984-2500 ext. 5631. In addition, applicants may report any instances of perceived discrimination through HRConnect either by calling toll-free at 1-877-628-4755 or by sending an email to . Job Posted by ApplicantPro

Job Description USALCO Savannah, LLC is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, the making of catalysts for oil refining, the housing market and other sectors. The Plant Manager will report directly to Regional Management. The position requires a motivated, detail oriented, and results driven team player who: • Incorporates safety, quality and continuous improvement into every decision while performing day-to-day tasks. Safety, Quality, and Productivity are paramount concerns., • Can efficiently manage personnel, chemical processes, and equipment reliability to meet manufacturing specifications for maximizing productivity without compromising safety or quality., • Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers. Essential Duties & Responsibilities: • Coordination and Supervision - Coordinate, manage, and monitor the workings of various departments within the site. To include safety, quality control, materials planning including inventory and logistics, manufacturing, maintenance, and finished goods distribution., • Financial - Review financial reports and data. Utilize financial data to improve performance of site. Prepare and control site expenses and capital budgets. Control inventory. Seek out cost savings through a continuous improvement program., • Human Resources - Plan the use of human resources. Organize recruitment and placement of required staff using company established policies. Establish site organizational structure with up-to-date succession planning. Establish work schedules, set employee expectations, motivate, train, and monitor/evaluate performance., • Manufacturing - Coordinate and monitor the work of various departments involved in production, warehousing and distribution of goods. Monitor performance and implement improvements. Ensure quality of products. Manage maintenance of equipment and machinery and provide technical support as necessary. Improve quality, profitability, efficiency and productivity through technology, personnel training and process improvement., • Communication - Monitor, manage and improve communication throughout the site. Facilitate coordination and communication between support functions such as IT, HR, Accounting, Sales, Engineering, and Finance., • Sales, Marketing and Customer Service - Manage customer support. Plan and support sales, marketing, and customer service activities. Consistently meet/exceed our customer service standards by ensuring prompt and accurate completion of service requests and by researching and resolving service issues and implementing long term solutions., • Strategic Input - Liaison with the Management Leadership Team in the development of strategic and operational activity for the site., • Other Responsibilities:, • The tracking and reporting of KPI's on Site overall performance, • Driving 5S & continuous improvement culture throughout the Site, • Implement processes, training, and record keeping to all personnel at the site to ensure all regulatory requirements are met, • Ensure security of site is maintained, • Provide operational support to personnel of site as needed to ensure customer demands are met, • Communicating and enforcing facility safety and environmental compliance Required: • High School Diploma or GED, • 5+ years of hands-on experience in a manufacturing environment, with at least 2 years of supervisory experience., • Previous experience in a specialty chemical, heavy industry, intensive asset environment with significant processing equipment and material handling, or equivalent., • Identify process improvements as prioritized to business needs and external benchmarks. Assess and resolve root causes of problems and inconsistencies., • Business acumen to align manufacturing to financial goals and customer needs and expectations., • Solid analytical and computer skills including Microsoft Office applications, ERP systems CMMS systems and CADD software., • Strong communication skills., • Outstanding team building and leadership skills., • Strong leadership and decision-making skills., • Demonstrated experience in championing and leading change across a business, including driving Management of Change and Operational Discipline., • Strong interpersonal, verbal, and written communication skills., • Ability to challenge status quo, identify key areas for improvement and implement actions to address. The Ability to: • Must be dependable, flexible and able to respond on short notice to satisfy requirements of customers., • Routinely lift 50 to 75 lbs. throughout the shift, • Routinely stand 60 to 70% of shift, • Routinely must traverse ladders, catwalks and close quarters, • Work at elevated platforms as high as 50 without hesitation or fear, • Work inside confined spaces, as needed

Job Description NEW HOTEL OPENING FEBRUARY 2026 Tempo by Hilton Savannah Historic District Featuring 148 Guest Rooms & Rooftop Bar What Makes a McKibbon Assistant General Manager? As a key member of the property leadership team, the Assistant General Manager works closely with the General Manager to oversee and guide the total operations of the property. Reporting to the General Manager, the Assistant General Manager is responsible for maintaining the highest level of ethical leadership to lead the property to achieve its business goals while embodying McKibbon’s Guiding Principles. A Day in the Life: • Assistant General Manager is responsible for assisting with the overall performance of the property’s operations, including (but not limited to) guest satisfaction, brand quality assurance, budget, labor, and associate satisfaction., • Train fellow associates as it relates to brand and company standards to maximize revenue and reinforce superior service culture., • Supervising associates with positive engagement to deliver high level of service, guest satisfaction and associate retention., • You will be responsible for maintaining compliance and remaining up to date on new initiatives for the brand and company., • Inspect and oversee that safety and security standard service quality in all operations., • Work closely with corporate teams in Human Resources, Accounting, Revenue Management, and Sales to ensure that property and company goals are achieved., • You will fill in where and when needed, in positions throughout the hotel operation., • Responsible for completing administrative accounting processes and reporting and oversee that cash management policies are upheld., • Attend and participate in weekly and monthly meetings at the hotel level and corporate level at the GM’s discretion., • Oversee the day-to-day operations in the absence of the General Manager, • Assist in hiring, training, and onboarding new employees., • Conduct performance reviews and provide constructive feedback on your direct reports., • Create employee schedules and ensure adequate staffing levels., • Ensure proper documentation and reporting of guest and associate incidents or accidents., • Embrace McKibbon’s Guiding Principles: Think Bigger, Love Your Community, Do the Right Thing, Support Each Other, Make a Lasting Impression. Requirements: • Experience with major hotel brands like Marriott, Hilton, or Hyatt (highly desired), • The skills and experience to lead a team to consistently deliver exceptional guest service., • The ability to implement McKibbon procedures as they relate to cost control and inventory management., • Ability to ensure that hotel policies and brand standards are consistently followed., • Ability to effectively interact with people of diverse socioeconomic cultural disability and ethnic backgrounds., • Maintain a high level of professionalism, trust and responsibility., • Demonstrates exceptional attention to detail, ensuring accuracy and timeliness in all communications and documentation., • Sufficient communication and problem-solving skills both written and oral., • The ability to develop the leadership qualities of all staff., • The ability to maintain positive relationships with the management company, property owners, vendors and clients., • Ability to work under pressure and handle multiple tasks., • Must excel in high-pressure, fast-paced environments., • Possess strong listening skills with the ability to comprehend and address concerns and issues raised by workers, clients, and guests., • Must be attentive, friendly, helpful, and courteous to clients, guests, and associates. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Product Support Sales Rep (PSSR). This individual must be a visible, active, and recognized customer support leader throughout your area of responsibility (AOR) by aggressively pursuing product support business opportunities both with existing and new customers to enable Dobbs Equipment to achieve monthly product support revenue & profitability objectives. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Ensure compliance with the Dobbs Equipment Health and Safety Policies and Procedures as defined by the Human Resources Department and articulated in the Health and Safety Manual as well as state/federal legislation., • Call on all customers (current and new customers) in your assigned territory in accordance with the agreed call frequency in order to maximize the product support revenue and profitability from your assigned area of responsibility., • Ensure that the Dobbs Equipment database is properly updated on a timely basis; this also includes the updating of customer unit fleet details, • Monitor local customer and competitive trends and make recommendations to your manager and the local branch management teams with the objective of enhancing our product support revenues & profitability., • Ensure customer satisfaction with Dobbs Equipment product support and deal promptly with any disputes or potential disputes in accordance with Dobbs Equipment’s policies and procedures. Follow-up with customers to ensure that disputes are resolved on a timely basis., • Staff the parts counter as scheduled and encourage customers to call the parts counter for routine parts orders for efficiency purposes., • Maintain strong expense controls while performing required job functions., • Develop the Dobbs Customer Portal by educating and training customers., • Assist in the collection of accounts receivables as requested from time to time., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Key Competencies: PSSR's are expected to aggressively target Deere and All Makes customer uptime by offering timely parts and service support focusing on the following (4) general strategic areas: • Selling shop and field labor jobs to Deere and All Makes customers, • Preventative Maintenance Agreements, • Undercarriage and Ground Engaging Tools, • Branch Service Share Actual to Target, • Parts and Labor Revenue, • New Product Support Customer Revenue, • JDLink Renewal Percentage, • PM Agreement Service Completion, • Undercarriage Revenue, • Attachment Sales Revenue, • Ground Engaging Tools Revenue, • Complete PSSR training as assigned on JDU, • Continue to complete courses as they become available to ensure that you are keeping abreast of our rapidly changing industry. Qualification: The requirements listed below are representative of the knowledge, skill, and/or ability required. • Valid Drivers License, • Customer Service experience Education, Skill, and/or Experience Requirements: • Bachelor’s degree or equivalent from four-year college or a minimum of 3 years related experience and/or training; or equivalent combination of education and experience., • Valid Driver’s License and maintain a clean driving record., • Ability to communicate effectively with teammates and customers, • Strong problem-solving skills., • Must be able to self-manage/self-motivate., • PC literate, proficient with MS Office, with an emphasis in Excel and Outlook required., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Extensive driving required; overnight travel required, • Bilingual a plus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. The noise level in the work environment is usually quiet. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • The employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear., • The employee frequently is required to walk; climb or balance; and stoop, kneel, crouch, or crawl., • The employee is occasionally required to sit., • The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds., • Specific vision abilities required by this job include close vision, and color vision. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job Description What Makes a McKibbon Executive Chef? As a key member of the leadership team, the Executive Chef is accountable for the culinary operations at our Rooftop Waving Girl Restaurant as well as ensuring food quality at our franchise Bluestone Lane café. You will be responsible for the banquet operations and quality of food provided. You will also have crossover responsibilities to the service team. The Executive Chef is committed to guest satisfaction and providing a great experience for all guests. A Day in the Life & Core Work Activities Exceptional Customer Service * Provides and sets positive examples of excellent service that are above and beyond for customer satisfaction. * Ensures quality food and service at our Waving Girl restaurant by using a “hands on” approach by working side by side with the team. * Manages day-to-day operations, ensuring the quality and standards meet the expectations of the guests and company. * Interact with guests to obtain feedback on product quality and service levels. Ensuring Culinary Standards and Responsibilities * Manages kitchen shift operations and ensures compliance with all food & beverage policies, standards and procedures * Estimates production needs on a weekly basis and communicates production needs to kitchen daily. * Develops, designs, and creates new applications, ideas, relationships, systems, and products, including artistic contributions. * Assists in determining how food should be presented and creates decorative food displays. * Maintains purchasing, receiving and food storage standards. * Ensures compliance with state and local food handling, sanitation standards, and applicable laws. Leading Kitchen Operations * Oversee hotel banquet operations to ensure proper product is ordered, accurate prep list, and maintain communication with the sales team to ensure BEO is accurate. * Monitor food prep and serving areas to ensure associates are meeting F&B quality, brand, and service standards in all areas. * Leads shifts and oversees that proper techniques and recipes are being followed * Encourages and builds mutual trust, respect, and cooperation among team members. * Ensures kitchen employees, line cooks, and any lead positions understand expectations. * Recognizes successful performance and produces desired results. * Conducts regular meetings with both front and back of house management to ensure the teams are in constant communication regarding marketing, upcoming events, menu changes and areas of opportunity. * Oversee the hiring and training of each new back of the house employee to ensure they get through the training program successfully. Maintaining Culinary Goals * Achieves and exceeds goals (IE: performance goals, budget goals, team goals, etc.) * Control the elements that determine profit and loss in the Food and Beverage operation including creating prep lists, par levels, monitoring food waste, inventories, budgeting, and overseeing proper production and service execution. * Work with the Restaurant General Manager and Restaurant Manager on administrative duties, including tracking expenses, P&L, and invoice coding and inputting. * Develop and execute culinary-driven marketing strategies that increase restaurant revenue and guest engagement. * Utilizes the Labor Management System to effectively schedule to business demands and for tracking of employee time and attendance. * Maintains recipes & procedures ensuring the staff are trained and informed accordingly. * Holds regular team meetings to applaud your team on their successes in addition to identifying areas of opportunity & room for improvement to maintain operational excellence. * Collaborate with the hotels’ sales team to ensure that all events and menus are created and executed as required by the client. * Collaborate with the Corporate Food and Beverage team in menu planning, training, areas or opportunity, etc. Requirements * 3 years’ minimum experience as an Executive Chef or Executive Sous Chef at a hotel or restaurant establishment with multiple meal periods. * Proficiency in standard office programs to include excel, word and point of sale systems. * Banquet experience (highly desired) * The ability to create a fun and supportive working environment * Keeping up to date with local events and tailoring Food and Beverage operations to enhance guests’ experience. * Utilizes interpersonal and communication skills. * The ability to work a varied schedule that includes weekends, holidays, and special event Physical Requirements * Must be able to push/pull/lift up to 50lbs. * Must be able to endure long periods of standing, sitting and walking. Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description Field Technician III Location: Greenfield, IN / Indianapolis, IN / Savannah, GA Duration: Fulltime Direct Hire Pay Range: $28.65 - $40/hourly, final negotiations held by hiring manager directly after interview. Shift: • Greenfield, IN / Indianapolis, IN : (2nd shift 3pm to 1:30am Monday – Thursday) / (Weekend shift : Fri – Sun - 6:00am – 6:30pm) As the field technician III, you will join our team of technicians based in Greenfield, IN / Indianapolis, IN / Savannah, GA supporting business and civil large aviation customers in our repair station shop. In this role you will provide maintenance, repair, and overhaul services on aircraft engines and you will work varying shifts and travel domestically and internationally up to 40%. This role will have occasional on-call weekends once a month.. Job Duties: • Comply with work scope instructions as directed by our Maintenance Operations Control, • Disassemble, clean, re-assemble and repair engines and modules, • Must be able to obtain and maintain repair station inspection approvals, • Ability to lift up to approximately 50 pounds and pass a required eye exam, • Use troubleshooting logic to identify defects in component or parts and access / use engine data materials such as AMM, EMM, IPC, etc., • High School Diploma or GED (General Educational Development) with 3+ years of aircraft maintenance, repair, and/or overhaul experience, OR, • Associate's degree with 2+ years of aircraft maintenance, repair, and/or overhaul, • Prior Gas turbine engine experience, • Customer relations experience, • Engine or Aircraft logbook familiarity, • Prior FAR145 repair station experience Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance and employee discounts with preferred vendors. Company DescriptionRussell Tobin is a leading minority-owned professional and technical recruitment and staffing advisory organization. We are comprised of specialized practices focusing on a variety of skill sets and industries. Having a depth and breadth of industry expertise, our subject matter experts are able to provide tailored and swift sourcing solutions to fulfill client hiring needs. In other words, we connect top talent with companies. We are the staffing arm of the Pride Global network, a minority-owned integrated human capital solutions firm, with additional offerings in vendor management, payroll programs, and business process optimization.Russell Tobin is a leading minority-owned professional and technical recruitment and staffing advisory organization. We are comprised of specialized practices focusing on a variety of skill sets and industries. Having a depth and breadth of industry expertise, our subject matter experts are able to provide tailored and swift sourcing solutions to fulfill client hiring needs. In other words, we connect top talent with companies. We are the staffing arm of the Pride Global network, a minority-owned integrated human capital solutions firm, with additional offerings in vendor management, payroll programs, and business process optimization.

Job Description Operations Assistant Manager COMPANY & CULTURE This position plays a key leadership role within a well-established feedyard focused on operational excellence, animal welfare, and team collaboration. The successful candidate will embody the company's core values of safety, integrity, accountability, and respect—building on a culture where every department works together toward efficiency, productivity, and animal performance. Our feedyard prides itself on maintaining a clean, safe, and progressive environment, where innovation and continuous improvement are encouraged at every level of the operation. We believe in developing people as much as cattle, creating opportunities for personal growth and professional advancement within a tight-knit, production-driven team. ROLE & RESPONSIBILITIES The Feedyard Operations Supervisor will oversee and coordinate all major feedyard departments, ensuring optimal cattle performance, operational efficiency, and employee safety. Primary areas of responsibility include: Cross-Departmental Coordination * Facilitate teamwork, communication, and accountability across cattle, feed, mill, and maintenance departments. * Align daily operations with production goals and animal health standards. Departmental Oversight Cattle Department * Supervise receiving, processing, shipping, and health protocols for all cattle. * Manage hospital system quality control and treatment accuracy. * Develop production schedules (implant programs, days on feed, marketing timelines). * Maintain accurate cattle and pharmaceutical inventories. Mill Department * Oversee ingredient receiving, grain processing, and mill housekeeping. * Ensure quality control and accurate inventory of feed and micro-ingredients. * Maintain mill equipment and feed loader operations. Feed Department * Direct feed program execution and bunk management. * Ensure timely, accurate feed delivery and truck maintenance. * Monitor feed quality and consistency. Maintenance Department * Oversee repair and upkeep of all rolling stock, facilities, and equipment. * Maintain fuel and parts inventory, waste management, and water systems (wells, storage tanks, troughs, plumbing). Safety & Compliance * Lead monthly safety meetings and promote a strong safety culture. * Model safe practices, monitor compliance, and address unsafe behaviors. * Encourage employee input to strengthen safety programs. Administrative & Strategic Support * Support departmental scheduling, capital expenditure planning, and budget management. * Partner with consultants (nutritionists, veterinarians, environmental, and safety advisors). * Engage in customer service and client relations as needed. IDEAL CANDIDATE / LEADERSHIP STYLE The ideal candidate is a hands-on leader with proven experience in feedyard or large-scale cattle operations. They will balance day-to-day operational management with long-term leadership development, striving to build cohesive, high-performing teams. Key Leadership Responsibilities * Develop, coach, and mentor department supervisors through one-on-one and group meetings. * Conduct monthly safety and operations reviews and set measurable KPIs. * Recruit, train, and retain top talent across departments. * Address issues promptly, fostering accountability and open communication. * Represent the feedyard positively within the local community. Qualifications * Strong understanding of feedyard operations, animal husbandry, and production efficiency. * Demonstrated ability to manage people and processes in a fast-paced environment. * Proficiency in data-driven decision-making and cross-department collaboration. * Excellent communication and leadership skills with a servant-leader mindset. * Prior supervisory or management experience required. WHAT'S IN IT FOR YOU This is a high-impact leadership position with the opportunity to shape the success and culture of the entire yard. The company offers competitive compensation and benefits tailored to experience, including: * Salary commensurate with experience and performance history * Health, dental, and vision insurance * Paid time off and holidays * Company vehicle and/or fuel allowance (if applicable) * Retirement plan with company match (if applicable) * Ongoing professional development and advancement potential You'll join a team where your leadership directly impacts operational excellence, cattle performance, and the development of future feedyard leaders. *Candidates must be eligible to work in the US as well as meet the qualifications listed above in order to be considered for the Operations Assistant Manager job.

Job DescriptionPosition Description: We are seeking a Lead Maintenance who thrives in working independently to get the work done! You will perform necessary work assigned by the Property Manager to keep apartments, mechanical equipment, pools, service request and make readies in good working condition. Responsibilities: Repair major and minor issues with equipment and buildings Complete maintenance and repair work orders, in a timely fashion Oversee the make ready process Order and replace broken parts or equipment Maintain a clean community and a safe workspace Perform other duties, as assignedQualifications: Previous experience in maintenance or other related fields Familiarity with hand-held tools and equipment Deadline and detail-oriented Ability to handle physical workload Must be EPA Type II Certification HVAC Certification $30.00 - $32.00 Hourly

Job DescriptionDescription: Join the MHI Team as a Shop Lead! Material Handling Inc., a leading forklift and material handling equipment provider in the Southeast. For more than 45 years, we've been thriving, and we want you to be a pivotal player in our team of over 200 employees --- spanning ten branches across AL, GA, KY, TN, and SC. At MHI, we're all about family values and hard work. We will strive to be the best overall partner supplier to all our clients, to provide opportunity for every employee to reach their full potential and maintain sustained profitability through honesty, integrity and doing the right thing. As a privately held company, we maintain the freedom to prioritize our people by upholding our culture and values while remaining competitive in the marketplace. We're seeking dedicated, collaborative individuals who thrive on tackling new challenges daily. We recognize that our employees are fundamental to our success, and we're dedicated to fostering a work environment that enables our team to reach their fullest potential. It's not just a job, it's a career. What You'll Do: • Schedule assigned manpower and equipment necessary to fulfill department assignments., • Instruct and familiarize employees with branch practices, procedures, and equipment., • Responsible for the Quality of Work performed by technicians in the Service Shop., • Assist in the training and development of the Service Department technicians while in the Service Shop., • Recommend new methods and procedures which would improve technician efficiency and/or morale., • Match employees with specific tasks based on their skill or expertise., • Explain how to complete tasks; make sure technicians know safety and security rules., • Audit PM and Repair work., • Inspect material shipped into or out of the department or shop area., • Offer time and material estimates assisting Service Manager with quotes and ensuring quoted repairs are completed on-time and within budget., • Responsible for maintaining good housekeeping, safety, and working conditions within the department or area., • Adhere to all OSHA, company, and customer safety procedures., • Supervise the maintenance of machines, equipment, and facilities in assigned department or area., • Attend formal training as scheduled and directed by the Service Manager., • Maintain discipline of employees within assigned in accordance with established rules and regulations and initiate appropriate action to enforce these rules and regulations., • Assist with customer problems arising in the field or shop., • Prepare reports, maintain necessary records and perform other related duties as directed., • Valid Driver’s License with a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Proficiency in mechanical, electrical, and hydraulic systems., • Forklift Certification preferred., • Effective communication and problem-solving skills., • Excellent time management and self-motivation., • Knowledge and able to maintain a safe and clean work environment, • Ability to read and interpret documents and follow instructions., • Mathematical skills for basic calculations., • Quick learner with a creative approach., • Overnight travel less than 5% (Training)., • Ability to operate and utilize basic technology and software. Work Environment: • Service shop setting with exposure to varying environmental conditions., • Close proximity to moving mechanical parts., • Use of Personal Protective Equipment. Physical Demands: • Full range of motion required for various tasks., • Ability to lift loads exceeding 50 lbs., • Specific vision abilities necessary., • Health Insurance – three different plans to choose from, • Voluntary Dental Insurance, • Voluntary Vision Insurance, • Company Paid Life Insurance, • Additional Life Insurance if desired, • Short & Long-Term Disability, • $200 boot allowance per year, • Overtime pay for any hours worked beyond 8 per day

Job Description Summary of Primary Functions: Dobbs Equipment is seeking an experienced Service Technician. Technicians are responsible for the repair, diagnosis, overhaul, and reconditioning maintenance of customer and company heavy equipment and components. Depending on the location and assignment, the technician will be responsible for some, or all the functions and duties listed below. These repairs may require working hours in addition to the normal work schedule for emergency calls or routine service as required. This job description does not include a complete listing of all the duties and functions of the position. Management reserves the right to assign other duties or projects as necessary. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Follow all safety rules and regulations in performing work assignments while maintaining a safe work environment and safe work habits., • Recondition, repair, service, and assemble any machines/industrial equipment., • Diagnose problems and determine what repairs are needed., • Perform any inspections as required., • Check and report any shortages and malfunctions to the Service Manager., • Maintain records and account for all time, parts, and supplies used in repairing and servicing both customer and dealership equipment., • Handle customer problems both objectively and tactfully., • Assist in directing work of helpers or on the job trainees and provide instructions as required., • Complete dis-assembly and inspection, as efficiently as possible, so parts may be ordered, and machine work can be scheduled promptly., • Perform all service tasks as assigned by the Service Manager, Supervisor, or Shop Foreman., • Prepare all reports and forms required in conjunction with job assignments., • Report to Service Manager any additional work required to ensure proper operation and safety of equipment., • Participate in service training programs required for development of skills and knowledge., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Represent the dealership as a professional Service Technician at all times., • Operate trucks and equipment with extreme care and caution., • Maintain and care for shop tools, equipment, vehicles, and other employee’s belongings., • Reports to work on time, as scheduled., • Ability to work up to 12-hour days, varying shifts, weekends, and holidays as needed., • Ability to operate company vehicles and follow all motor vehicle state safety laws (if necessary)., • All employees are expected to adhere to the safety policies of Dobbs Equipment and the clients for whom we work., • Following the safety policies of Dobbs is a condition of employment and is everyone’s responsibility. Qualification: The requirements listed below represent the knowledge, skill, and/or ability required. • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Ability to operate heavy equipment safely around shop. Education, Skill, and/or Experience Requirements: • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training)., • Bilingual a plus. Work Environment: While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision., • The employee is regularly required to talk or hear at moderate noise levels. We’re an Equal Employment Opportunity and Affirmative Action Employer Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job DescriptionJob Summary: The Maintenance Technician will oversee the performance and maintenance of large production machinery. You Will: • Perform preventive maintenance inspections and service on machines., • Thoroughly clean machines and machine parts, removing parts and reinstalling as necessary., • Oil and lubricate moving parts on machines to ensure effective performance., • Record and report damaged, worn, or broken parts., • Order and install replacement parts for machines., • Identify the causes of unexpected breakdowns of machines., • Repair broken machines quickly and efficiently., • Prepare reports documenting work performed., • Clean, organize, inventory, stock, and otherwise maintain shop areas, parts, tools, and supplies., • Coordinate with managers to schedule regular maintenance on machines., • Collaborate with product manager or plant engineer regarding new products being added and modifications that will be required., • Make necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required., • Perform other related duties as assigned. You Have: • Some vocational or community college with related coursework or equivalent experience, required., • Mechanically inclined with great problem-solving skills., • Works well independently and with others., • Good communication skills., • Organized with attention to detail., • Ability to work in a fast-paced and stressful environment.

Job Description Title: Production Control Team Member Reports to: Group Lead/Assistant Manager Department: Production Control Summary: Overview The Logistics Team Member operates in a dynamic environment, engaging in repetitive bench or line assembly tasks to construct automotive seat units or sub-assemblies with intricate parts and specific tolerances controlled by jigs and fixtures. Responsibilities include, but are not limited to: • Assisting in shipping and receiving functions., • Coordinating the flow of work and materials., • Supporting shipment schedules., • Collaborating with department supervisors to assess work progress and completion timelines., • Compiling reports on work progress and inventory levels., • Verifying the accuracy of incoming and outgoing shipments by examining contents and comparing them with records., • Generating documents such as work orders, bills of lading, and shipping orders for material routing., • Monitoring production flow and handling materials as required., • Packaging finished products for shipment., • Rotating through various tasks in a specific production process., • Ensuring adherence to 5-S standards., • Tracking parts and scrap using electronic systems., • Following processes and procedures associated with Logistics/Shipping & Receiving., • Writing production reports when necessary., • Performing various operations within the group to maintain workflow., • Conducting monthly inventory counts., • Assisting in managing the consumption/assessment of differences in actual stock quantities vs. inventory system., • Maintaining customer and internal packaging instructions., • Adhering to Quality policy, ISO/TS16949, EHS policy, and company SOP (Standard Operating Procedures)., • Adhering to the anti-mutilation policy., • Experience in material/product movement of automotive components using various lifts and devices., • Preferably 1+ year of experience in material management/shipping & receiving., • Strong problem-solving skills., • Proficient in math, reading, and writing., • Good interpersonal and communication skills., • Computer skills, including PDA and warehouse management systems. Physical Demands: • Heavy walking and standing throughout the shift., • Frequent bending at the knees and waist., • Regular lifting and pushing up to 80 pounds., • Use of hands for various tasks., • Raising arms overhead., • Utilization of close and peripheral vision., • Willingness to travel for training., • Ability to work overtime and/or weekends., • Adaptability to a fixed or rotating schedule is essential. Hyundai Transys Georgia Seating System is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Hyundai Transys Georgia Seating System is committed to achieving a diverse workforce through the application of its equal opportunity, non-discrimination, and anti-harassment policies in all aspects of employment including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. All employment decisions at Hyundai Transys Georgia Seating System are based on business needs, job requirements, and individual qualifications without regard to race, color, religion or belief, sex, sexual orientation, gender identity, family or parental status, national origin, veteran status, disability, or any other status protected by the laws or regulations in the locations where we operate. This Position Description is intended as a summary of the job responsibilities for this position. HTGSS reserves the right to add, remove, and/or alter job responsibilities in whole or in part with or without notice. Additionally, all HTGSS team members are subject to all other HTGSS policies and procedures, including those set out in HTGSS’s Team Member Handbook. This Position Description is not a contract. Every Team Member’s employment with HTGSS is voluntary and is subject to termination by the team member or HTGSS at will, with or without cause, and, with or without notice, at any time. Nothing in this Position Description or HTGSS policies shall be interpreted to be in conflict or to eliminate or modify in any way the employment-at-will status of HTGSS team members.

Job Description Description Maximize customer satisfaction by performing repairs, maintenance work, and installation of various equipment, primarily dock doors and levelers, that meet or exceed the customer's expectations. Respond to customers in a timely, polite, and professional manner, and conduct work with an efficiency that will contribute to the reputation, growth, and profit of Lift Power, Inc. Retain the ability to work on multiple primary duties at any given time. Primary Duties and Responsibilities: • Inspect customer equipment and perform service, maintenance, and installation tasks as necessary, • Communicate needs or concerns to the Coordinator or Department Manager, • Efficiently perform scheduled maintenance per customer contract, • Follow all scheduled maintenance procedures and policies as dictated by the company, • Accurately and neatly document each service call or installation and provide all necessary paperwork, • Complete and submit paperwork and time cards in a timely fashion, • Follow all safety procedures of both Lift Power and the customer when working on a job site, • Use appropriate PPE, • Dispose of waste properly, • Leave jobsites in orderly condition, • Follow current company policy including, but not limited to:, • Maintain the company service vehicle in a clean, orderly, and hazard-free condition, • Includes regular maintenance such as oil changes, tire rotations, etc, • Secure and maintain service and parts inventory in the company vehicle, • Provide well-maintained personal tools required to effectively perform equipment service duties, • Attend all training meetings and seminars provided by the company, • Accept other duties and responsibilities as assigned by managementRequirements, • Prior Professional Commercial dock and door experience required, • Mechanical skills and some knowledge of hydraulics, electrical, and welding preferred, • Ability to perform strenuous and heavy work, • Can exert force up to 100 lbs and frequently handle loads up to 50 lbs, • Can perform continuously with full body motion for climbing, reaching, pushing, lifting, etc., • Have and maintain a valid driver's license and be insurable by Lift Power's insurance company's standards, • Valid CDL license required

Job Description Summary of Position: The Quality Customer Liaison maintains the daily activities to support the quality processes and initiatives at the customer site. Reporting to the Quality Customer Engineer, this position acts as the primary point of contact for the customer on-site quality activities, ensuring compliance with company standards and customer requirements. The Quality Customer Liaison provides technical guidance to team members, provides quick and accurate communication, facilitates problem-solving, supports inspections and audits, and drives adherence to the highest level of quality and customer service. This role plays a key part in promoting a culture of continuous improvement and operational excellence. Corporate: • Adheres to the HTGSS policies and procedures, • Learns, demonstrates and upholds HTGSS Core Values, • Complies with all HTGSS Certification standards; Management System (TS16949), Environmental ISO 14001-2015 and Health and Safety ISO 45001-2018 policies and procedures, • Treats all HTGSS team members with respect and professional courtesy, • Always strives to maintain a positive work environment, • Manages the department budget efficiently as per approved annual budget, • Performs additional assignments / duties as assigned EHS: • Adhere to all safety policies and procedures, • Complies with all safety policies and 5S clean philosophy to maintain a safe, clean working environment, • Meets company safety goals Duties and Responsibilities: • Provide leadership, development, and training to on-site Team Members, reporting directly to Quality Group Leader/ Quality Customer Engineer any concerns or questions., • Promote a proactive quality culture throughout the organization by training, coaching, and influencing teams., • Resolving product problems on-site, in Casa Grande, AZ, with the customer., • Maintains customer satisfaction through direct communication., • Maintains safe and healthy work environment by following standards and procedures Hyundai Transys Georgia Seating System and customer., • Updates job knowledge by participating in educational opportunities., • Follow written and verbal communication guidelines as established by Quality Customer Engineer and/or Quality Manager to accurately and efficiently share HTGSS product and quality details., • Must understand the components and functions of the First Row, Second Row and Third Row of all seat models., • Assist with coordinating quality activities within customers to ensure the total manufacturing objectives are accomplished., • Reviews quality or processing issues with the Quality Customer Engineer, Quality Manager, and Quality Group Leader as needed., • Implement containment activities as necessary., • Ensure all rework has been completed, documented and meets customers’ specifications., • Ensure all necessary reports have been performed and submitted daily, weekly, monthly or as needed., • Remove/exchange full seat components as necessary due to problems., • Monitor assembly operations and be able to recognize defective parts., • Maintain continuous communication with the Quality Customer Engineer during shift., • Reports to: Quality Customer Engineer

Job Description Title: Quality Team Member Reports to: Manager Department: Quality Summary: The Quality Team Member operates within a dynamic, fast-paced environment, performing repetitive quality-related tasks on a seat manufacturing assembly line, as well as in receiving and shipping areas. Utilizing specific tools and devices, the role ensures precise tolerances and requirements are met to always uphold the highest quality standards. Responsibilities (including but not limited to): • Support the Quality Department in maintaining the highest quality standards for all parts, products, and finished goods., • Inspect finished products before transitioning to the next department or holding area., • Conduct layered audits and quality checks., • Generate detailed quality reports as necessary., • Collaborate with Supervisors to address production or processing issues., • Work with department Supervisors and Managers to establish and monitor product standards, including examining raw product samples and directing testing during processing., • Review parts to determine if they meet quality standards., • Assist in setting up and calibrating gauging and measuring devices; provide training to floor associates on device usage., • Track parts and manage scrap., • Package finished products and prepared them for shipment as needed., • Rotate through all tasks required in a particular production process., • Ensure proper adherence to 5-S principles., • Perform various operations within the group to maintain workflow., • Adhere to Quality policies and standards, including ISO 9001, TS16949, IATF16949., • Follow all environmental, health, and safety policies., • Broad knowledge of quality systems, including TS16949, ISO, QS; experience in continuous improvement, Kaizen, 5-S, lean manufacturing, KANBAN, TPS., • Quality experience in an assembly and manufacturing environment., • Ability to pass X Rite color hue test., • Identify visual defects and contribute to quality decisions., • Properly use quality gauges, tools, and devices., • Strong problem-solving skills., • Good interpersonal and communication skills. The physical requirements outlined below are indicative of those necessary for an employee to effectively carry out the essential functions of this job. Reasonable accommodations may be provided to facilitate individuals with disabilities in performing these essential functions. • Regularly engage in talking and hearing., • Involve heavy walking and standing throughout the shift., • Frequently bend at the knees and waist., • Utilize hands for typing, handling objects, and managing paperwork., • Engage hands in typing, writing, handling objects, boxes, equipment, tools, and paperwork., • Reach and hold items at chest level or above the shoulder., • Lift and carry objects weighing 50 lbs. to 75lbs. may be necessary., • Wear safety Personal Protective Equipment (PPE) for eyes, face, head, feet, hearing, hands, and arms as required., • Use close vision, peripheral vision, focus, and discern colors as needed for reading equipment and material labels, color-coded inventory, computer terminal screens, etc., • Demonstrate a willingness to travel for training if required (domestic/international)., • Ability to work overtime and/or weekends as needed., • Flexibility to work a fixed or rotating schedule. Hyundai Transys Georgia Seating System is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. Hyundai Transys Georgia Seating System is committed to achieving a diverse workforce through the application of its equal opportunity, non-discrimination, and anti-harassment policies in all aspects of employment including recruitment, hiring, promotions, transfers, discipline, terminations, wage and salary administration, benefits, and training. All employment decisions at Hyundai Transys Georgia Seating System are based on business needs, job requirements, and individual qualifications without regard to race, color, religion or belief, sex, sexual orientation, gender identity, family or parental status, national origin, veteran status, disability, or any other status protected by the laws or regulations in the locations where we operate. This Position Description is intended as a summary of the job responsibilities for this position. HTGSS reserves the right to add, remove, and/or alter job responsibilities in whole or in part with or without notice. Additionally, all HTGSS team members are subject to all other HTGSS policies and procedures, including those set out in HTGSS’s Team Member Handbook. This Position Description is not a contract. Every Team Member’s employment with HTGSS is voluntary and is subject to termination by the team member or HTGSS at will, with or without cause, and, with or without notice, at any time. Nothing in this Position Description or HTGSS policies shall be interpreted to be in conflict or to eliminate or modify in any way the employment-at-will status of HTGSS team members.

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: The Training Instructor develops and conducts programs to train employees and occasionally customers of Yancey Bros. Co. on the repair, installation, maintenance, programming, troubleshooting, diagnostics tooling, proper processes, proper methods and operations of machinery and equipment. The Technical Training Instructor will also instruct safety topics and other topics that convey the company Mission, Vision and Values. Primary Responsibilities: • Confers with management and staff to determine training objectives and technical needs., • Creates training programs / implements existing training programs- including / utilizing outline, text, handouts, tests, and laboratory exercises., • Lectures classes on safety, installation, programming, testing, maintenance and repair of machinery and equipment- following the outlines, handouts and text materials., • Demonstrates proper procedures being taught, such as programming, testing and repair., • Observes class participants in the classroom and in the lab setting- answering questions and determining additional activities to ensure learning, • Administers written and practical exams to determine understanding and competency. Creates performance reports to evaluate learning., • Facilitation / Instruction at an expected rate of 75% of available time., • Schedules and secures equipment, training aides, training location and classroom related materials., • Updates and develops training aides used in the classroom. Deal with vendors., • Administers written and practical exams and writes performance reports to evaluate trainees' performance., • Participates in meetings, seminars, and training sessions to obtain information / skill sets needed to retain competency in the training arena, • Participate in required safety program, and work in a safe manner. Education/Experience: • Level 4 Technician or above (equating to Yancey Bros Co Career Development Program), • 5 years of industry related experience and/or training, • The qualified candidate will have great experience in at least 2 of the following: Machine/Engine Electronics, Hydraulics or Diesel., • Skilled in ‘Basic’ computer applications - Word, PowerPoint, Excel, Acrobat and other applications associated with building or presenting course material or presentations., • The ability to communicate through email - sending & receiving notes, attachments, meeting notifications and working with a calendar function., • Effective use of Cat Systems (or ability to learn), • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Valid Driver License., • The employee must occasionally lift and / or move up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus- the use of Safety Glasses in the shop area is a requirement., • Verbally communicate for extended periods of time, • While performing the duties of this job the employee is regularly exposed to moving mechanical parts, running diesel engines and outside weather conditions., • The noise level in the work environment is usually moderate but will contain instances of high levels of engine and work related noise (Hearing protection may be required and is provided)., • Travel to instructor training and customer on-site training may require overnight stays (not usually more than five consecutive nights)., • Travel to Yancey Bros. Co. sites and customer sites will be required. Some overnight stays may be required. Preferred Qualifications/Skills: • Caterpillar Certified Instructor ( or ability to obtain) While performing the duties of this job the employee is regularly required to use hands to finger, handle or feel, climb or balance, stoop, kneel, crouch, or crawl, and talk or hear. Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Pay, • Individual Bonus Opportunities Available, • Technician Tool Allowance, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Paid Holidays, • Tuition Reimbursement, • Ongoing Training, • Advancement Opportunities

Job DescriptionGroundskeeper/Maintenance-1st Shift- $16.50-$20.00/hr. Workbox Staffing is hiring Groundskeeper/Maintenance Tech in the Savannah, GA area. As a groundskeeper you will be using your Maintenance skills including general plumbing, carpentry, small appliance repair, electrical skills, and/or painting skills. All Workbox Staffing Employees receive access to a personalized career consultant, Healthcare Benefits, Disability Insurance, and advancement opportunities. Skills: • Residential plumbing repair (sinks, tubs, and toilet parts and PVC, shutoff valves, stems,, • seats, supply lines, troubleshooting, and minor clog clearing), • Residential electrical repair (wiring switches, outlets, installing fixtures, diagnosing power problems), • Residential carpentry and drywall repair (stud finding, drywall installation, finish for doors and trim, hanging and repair of closet rods, types of caulks, wall patch, and repair), • Painting is a plus., • Perform work as instructed by the Property Manager., • Timely, efficient, and satisfactory completion of all maintenance service requests., • Maintaining a safe workplace and utilizing safe working practices., • Care of all company owned tools and equipment.Qualifications:, • Have 3-6 months of related work experience or training., • Must pass a drug test and background check. #SVN8

Job Description Parts Counter Salesperson Department: Parts Reports to: Parts Manager or Parts Lead or Corporate Parts Manager Supervises: None Purpose: Responsible for selling, receiving, and delivery of parts and accessories. In addition performs in-store customer service, overall organizational promotion, and stocking duties. Responsibilities: • Promotes and sells products and/or services to meet customer needs, • Supplies Service Technicians with parts as required, • Assists with preparing and maintaining merchandise displays, • Verifies receipting-in of shipments and assists with placing Machine Down and Stock Orders in their proper inventory locations, • Assists in keeping parts department clean and orderly, • Follows up on shortages and expedites issues by reporting to the manager, • Basic data entry/keyboarding skills, • Basic parts and machinery knowledge, • Ability to use the John Deere Parts Catalog computer application, • Ability to work in a team environment, • Ability to lift items weighing up to 75 lbs., • High School diploma or equivalent experience eimHE6ZzD3

Job Description What Makes a McKibbon Restaurant General Manager? As a key member of the leadership team, the Restaurant General Manager is accountable for creating elevated service and experience at our Waving Girl rooftop restaurant and overseeing our Bluestone lane café and banquet operations. The Restaurant General Manager is committed to guest satisfaction and providing great experiences for all guests. Responsibilities * Lead Food & Beverage operations to ensure the highest level of guest satisfaction. * Lead Waving Girl rooftop restaurant as a working manager driving excellence in our rooftop restaurant daily. * Oversee operations in our Bluestone Lane Café and assisting directing these teams to be successful under your leadership. * Move throughout the facility and monitor the action of food prep and serving areas to ensure that associates meet food and beverage quality, brand, and service standards. * Monitor food preparation and service areas to uphold brand, quality, and service standards. * Plan and implement effective orientation and training programs for new hires and professional development for existing staff. * Collaborate with the Executive Chef to manage elements impacting restaurant and banquet profitability, including menu development, food costs, and operational efficiency. * Ensure compliance with safety, sanitation, energy management, and preventive maintenance standards. * Work with the Corporate Food & Beverage team to plan menus, craft cocktails, and product pricing while maintaining budget guidelines. * Assist in operations at the Franchise Bluestone Lane Cafe, ensuring Franchisee standards and assisting restaurant manager to achieve both service and financial goals. * Coordinate with the corporate and hotel sales teams to develop marketing and sales promotions. * Oversee administrative duties such as tracking expenses, maintaining profitability, and invoice management in collaboration with the Hotel General Manager and corporate food and beverage team. * Establish quality and output standards for department personnel. * Implement training programs in coordination with Corporate Food & Beverage to ensure consistency. * Implement policies and procedures for the restaurant. * Plan and approve staffing, scheduling based on operational needs for all outlets. * Maintain inventory, budgeting, food costs, labor costs, and invoice coding for financial analysis and reconciliation. * Generate and analyze business volume forecasts to optimize planning. * Build and maintain long-term vendor partnerships to secure high-quality, cost-effective products. * Perform other duties as assigned by hotel general manager. Requirements: * An associate or bachelor’s Degree * 5 years’ minimum experience in a beverage/food outlet in a managerial role * Extensive knowledge and experience of the restaurant industry, industry trends, facilities, and equipment. * Knowledge of beer, wine, and spirits. * Experience in banquet operations * Ability to work various shifts based on need and level of business. * Strong leadership and communication skills. * Proficient in cost analysis, budgeting, and forecasting. * The ability and drive to personify our culture in every interaction with guests and associates * The ability to manage, train and develop 15 plus associates. * The ability to deliver on the quality of service that guests deserve and expect * Serv safe Manager and Alcohol certified. * The ability to work a varied schedule that includes weekends, holidays, and special events Physical Requirements * Must be able to push/pull/lift up to 50lbs. * Must be able to endure long periods of standing, sitting and walking. Ideal Skills & Qualities: * The ability to communicate in a friendly manner with guests * The ability to create a fun and supportive working environment * Oversee leadership in restaurant and Bluestone Lane café. * The ability to execute inventory control and calculation for monthly analysis and reconciliation * Keeping up-to-date with local events and tailoring our Waving Girl restaurant and our Bluestone Lane cafe to enhance guests’ experience in the local community. * Ability to create unique and localized experiences based on seasonal and local events. * The ability to familiarize oneself with Company Health and Safety Policies and ensure your areas promote and comply with them. * A conscientious spirit and the drive to excel in every aspect of your duties * The creativity to enhance sales in the lounge and food outlets Perks & Benefits Beyond the Basics: We know that hospitality starts from within, and that’s why we value the employee experience as much as we value our guests’ experience. From our competitive benefits package to our fun-loving spirit, we strive to create an environment that’s equal parts work and play. Our people will always be our first investment. We offer benefits and perks based on full or part time employment: Full Time Associates: • Comprehensive benefits package including medical, dental, and vision, • Life insurance, • Pet Insurance, • Short and long-term disability, • Paid time off and holidays, • Tuition assistance Financial & Occupational Wellness: All Associates • Competitive Compensation with incentives (incentives vary by position), • 401K Savings Plan with 50% matching funds, • Associate referral program, • Brand and company training classes, workshops and conferences for career growth and development (varies by position) Personal Wellness: All Associates • Fundraising matching funds program, • Team volunteer opportunities, • 24/7 chaplain services, • Exclusive hotel rate discounts Any state specific holiday, vacation or benefit requirements will apply. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, age, disability, pregnancy or maternity, sexual orientation, gender identity, citizenship status, military status, or any other protected characteristic in accordance with applicable federal, state, and local laws.

Job Description General Summary Provide support for daily branch operations, i.e. make deliveries, pull orders, and put away stock. Supervisor Branch Manager Essential Job Functions 1. Have and maintain a valid driver’s license 2. Make deliveries to and pick-ups from customers, other branches/warehouses, and vendors/suppliers 3. Pull orders for customers 4. Load and unload shipments/deliveries using proper equipment 5. Perform pre-trip and post-trip vehicle inspections and maintenance functions according to DOT regulations. 6. Comply with all federal, state and company requirements pertaining to motor vehicle laws and accident reporting. 7. Keep up daily trip logs, pre and post inspection reports, monthly fuel reports 8. Prepare product for shipment via UPS, FedEx and common carrier 9. Receive shipments from UPS, FedEx and common carrier 10. Handle and process paperwork on damaged product. 11. Prepare Returns and Reclaims for shipment including appropriate paperwork 12. Break down and put away stock using proper equipment 13. Greet customers promptly and courteously by name (if known) 14. Answer telephones promptly and courteously identifying yourself and the company 15. Regular and punctual attendance. Other Job Functions 1. Assist at counter as needed 2. Assist in maintaining a clean and safe work environment inside and out; i.e., empty trash, sweep floors, clean bathroom(s), etc. 3. Perform related jobs as required Skills and Physical Abilities 1. Meet the following physical requirements • All DOT medical and drug-free requirements • Ability to carry at least 75 pounds • Lift boxes up to 3.6 cubic feet/105 lbs. (4-5 hours daily) • Sit in, get into/out of vehicle cab (2-3 hours daily) • Steer and drive vehicle (also shift a standard transmission) (as required) • Ability to climb ladders 2. Ability to use computer system as pertains to the job 3. Ability to get along with customers and other employees, follow directions and work under pressure Equipment 1. Forklift Education/Knowledge 1. Geography of the area Licenses Required 1. Commercial Driver’s License (CDL) with hazmat endorsement Work Environment

Job Description Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. Role Overview: We are currently hiring a Wastewater Operator. The Wastewater Operator is responsible for keeping the facility in compliance with the discharge permit and assisting the Facility Manager with residual management and chemical inventory. Position Responsibilities: • Maintain Hazard Communication compliance in tank wash and treatment areas., • Treat water daily to ensure adequate capacity for tank wash and customer water., • Keep treatment area clean and neat at all times and monitor sludge accumulation in all storage tanks., • Maintain accurate manifests files on all customers and work with Customer Service, • Coordinator to ensure the bill is accurate., • Monitors what is running through wastewater and pinpoints problems through the waste program., • Ensure compliance by meeting permit requirements and complying with all city, state, and federal regulations., • Handle hazardous waste to include storage and manifests as required, • Maintain annual RCRA training requirements, • High School diploma or equivalent, • 1-2 years of experience treating wastewater required, • Have and maintain a state Wastewater Operator license pending state requirements Location: Savannah, GA DCI Benefits: • Medical, dental and vision Insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement

Job Description Position/Title: Service Manager Reports to: Community Manager Start Date: Immediately Location: Savannah, GA - Preston Grove & Allier Port Wentworth We are currently searching for an experienced Service Manager that will oversee 2 properties in our portfolio in Savannah, Georgia. The LMS team is made up of neighbors serving neighbors. We are here to transform housing to enrich the lives of all our neighbors by creating community and creating value. LMS does this by being transparent, collaborating with each other, being innovative, and by having integrity. It is what is expected of each team member, and we use it to guide our actions and decisions each day. Great people are key to great success. A career should be a satisfying lifestyle, and not just a job. When you join our team, you are laying a foundation for a rewarding, lasting career in real estate. Responsibilities Include: • Always display a friendly and courteous attitude towards prospects, residents, vendors, and other employees through the LIVE IT culture., • Pre-inspect notice to vacate apartments and complete make-ready checklist and scheduling of make ready contractors., • Inform Community Manager of needed services and repairs., • Complete special projects as may be assigned and prioritized by the Community Manager and Regional Manager. Inspect exterior of the property., • Perform building and common area upkeep on a daily basis in accordance with company standards., • Ensure vacant unit thermostats are set at the proper setting for a vacant unit., • Complete or oversee the completion of preventative maintenance according to the guidelines set forth in the Sam Manual., • Maintain accurate records and provide resident training as required., • Order parts and supplies and maintain inventory, utilizing inventory system., • Maintain shop appearance to standards to facilitate quick assessment of supply inventory., • Maintain proper equipment, and equipment inventory to ensure warranty compliance. Review site budget for guidance., • Approval may be required in certain circumstances., • Obtain bids and negotiate prices, as necessary, with vendors and contractors., • Coordinate delivery and work schedules with vendors, contractors and Community Manager., • Perform effective emergency maintenance (after hours) as required and in accordance with the Maintenance Operations Manual., • Coordinate maintenance objectives with the Community Manager daily., • Perform, and report on, all work according to the safety standards of the company, OSHA, health codes and Maintenance Operations Manual., • Perform work area clean-up on a weekly basis., • Oversee all outside contractors and vendors who perform work on property and ensure work completed to contract and to expectations., • Ensure that all required inspections and permits are completed in timely manner including, but not limited to: fire, backflow, elevator and pool. Ensure all required documentation is completed and current.Experience, Skills & Requirements:, • CPO & EPA Certification Required, • Must have reliable vehicle to transport tools and equipment to job sites., • Must provide proof of liability insurance for same., • Bondable and Valid Driver’s License, • Extensive mobility and good physical condition., • The ability to lift 100 lbs. for the installation and removal of appliances., • The ability to operate all required hand tools to make repairs., • The ability to walk, stand, sit, kneel, squat, bend, stoop, push, pull, twist, climb stairs, climb ladders, grasp, squeeze, and reach including overhead items in need of repairs., • The ability to drive to and from job sites. LMS is a vertically-integrated, multifamily real estate firm offering acquisition, development, construction, and property management. We have more than 20 years experience navigating the Southeast market. We currently have more than $150 million in construction and development projects and more than $1.5 billion in assets managed. Our mission is to Create Community and Create Value. We do this by leveraging innovation and integrity; providing investors with the most value out of the deal, a smooth and transparent working relationship, and meaningful impact on people and communities along the way. Powered by JazzHR BWvnGr1EoV

Job DescriptionWho We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest asset…our employees. What You Will Be Doing: The Boot Camp Training Instructor will be leading our four (4) month, highly structured accelerated heavy equipment technician training program. This program takes individuals with technical aptitude and positive work ethic to train them in processes, procedures and skill sets needed to graduate as an entry level heavy equipment technician at a Caterpillar dealership. The instructor will act as a lead man, mentor, and facilitator of basic course competencies in electrical, hydraulics and diesel systems. The Boot Camp Training Instructor will also instruct safety topics and other topics that convey the company Mission, Vision and Values. We are primarily looking to serve Albany, Savannah, Gwinnett, McDonough or Macon areas. Primary Responsibilities: • Schedule, demonstrate and manage the learning plan and day to day activities of the boot campers in both classroom and shop settings, • Assist in the recruiting and selection of boot camp classes, • Acting as a working lead man for the boot campers, • Lectures classes on safety, installation, programming, testing, maintenance and repair of machinery and equipment- following the outlines, handouts and text materials, • Demonstrates proper procedures being taught, such as programming, testing and repair, • Observes class participants in the classroom and in the lab setting- answering questions and determining additional activities to ensure learning, • Administers written and practical exams to determine understanding and competency. Creates performance reports to evaluate boot camper learning., • Schedules and secures equipment, training aides, training location and classroom related materials, • Updates and develops training aides used in the classroom. Deal with vendors., • Participate in required safety program, and work in a safe manner., • Additional duties as assigned by manager. Who We Are Looking For: To be successful in this position you should have a strong mechanical aptitude, knowledge of tools applicable to the position and the desire to learn. You should possess a strong sense of urgency and desire to provide superior customer service. The ability to take direction and work in a team environment is essential to this position as well. Education/Experience: • Level 3 Technician or above (Yancey Bros Co career development program), • 5 years of industry related experience and/or training, • The qualified candidate will have related experience in at least 2 of the following: Machine/Engine Electronics, Hydraulics and Diesel., • The desire and skill set to lead and instruct inexperienced students with a sound technical aptitude, • Skilled in ‘Basic’ computer applications - Word, PowerPoint, Excel, Acrobat and other applications associated with building or presenting course material or presentations., • The ability to communicate through email - sending & receiving notes, attachments, meeting notifications and working with a calendar function., • Effective use of Cat Systems (or ability to learn), • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Valid Driver License., • The employee must occasionally lift and / or move up to 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus- the use of Safety Glasses in the shop area is a requirement., • Verbally communicate for extended periods of time, • While performing the duties of this job the employee is regularly exposed to moving mechanical parts, running diesel engines and outside weather conditions., • The noise level in the work environment is usually moderate but will contain instances of high levels of engine and work related noise (Hearing protection may be required and is provided)., • Travel to instructor training and customer on-site training may require overnight stays (not usually more than five consecutive nights)., • Travel to Yancey Bros. Co. sites and customer sites will be required. Preferred Qualifications/Skills: • Industry experience with success in quality work and following procedures Values: At Yancey Bros. Co, we are always looking to add people to our team who share our core values: • Safety: We value the lives and health of our team and customers above all else., • Integrity: We are ethical and trustworthy, demonstrate respect for others, and communicate truthfully and promptly., • Teamwork: We work as one across our organization for the benefit of our customers., • Excellence: We strive to be the best, continuously improving our customers’ experience and the solutions we provide., • Acting in a safe manner, • Exhibiting honesty and integrity, • Acting in a fair and ethical manner, • Team mentality, • Delivering quality results, • Embraces change / improvement, • Exhibiting superior customer service skills, • Exhibiting pride and ownership, • Working with a sense of urgency, • Exhibiting a winning attitude What We Offer: Yancey Bros. Co. offers a full benefits package that includes aggressive compensation levels, technician tool allowances, full medical, vision and dental coverage, employee wellness programs, paid vacations and more. Competitive Pay Structure • Competitive Compensation, • Individual Bonus Opportunities Available, • 401k Plan Strong Company Match, • Employee Profit Sharing, • Medical, Vision, Dental Insurance, • Prescription Drug Coverage, • Flexible Spending Accounts, • Short & Long Term Disability, • Paid Holidays, • Tuition Reimbursement

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: TRAVELING HVAC SERVICE TECHNICIAN JOB RESPONSIBILITIES & REQUIREMENTS: Experienced HVAC Service Tech for company that handles service work and site maintenance for national accounts. • Responsible for servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location, • Performs preventative maintenance, site surveys, replacement, and modifications as need or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary, • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources., • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed, • 5 years of experience required, • TRAVEL A MUST – travel can be up to two weeks at a time when required BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations i73kVfLKGq

Job Description Job Title: Marketing Representative Department: Property Management Reports To: Community Director and/or Marketing Manager *if applicable FLSA Status: Non-Exempt Position Summary: The Marketing Representative is responsible for coordinating the community’s marketing, leasing, and renewal strategies to achieve occupancy, revenue, and resident retention goals by performing all activities related to leasing to new residents, providing resident satisfaction throughout the term of the lease, and securing resident lease renewals. Organizational Responsibilities: • Journey Visionary: Work with on-site team members to prioritize solutions and provide frameworks that will drive journey metrics., • Passion & Innovation: Deeply understand issues and opportunities and demonstrate relentless focus on solving them through innovative solutions., • Organizational Ambassador: Engage with residents, prospective residents, associates, and stakeholders to understand needs and lead with the values of the company culture., • Project Management: Create and maintain clear and sequenced plans to successfully launch projects., • Change Management: Experienced in leading cross-functional teams through change programs and projects, leverages frameworks and influence modeling to drive awareness and outcomes., • Performs all sales and leasing activities in person to achieve the property's revenue and occupancy goals by greeting and qualifying prospects face-to-face, conducting property tours and showing apartments, processing applications, credit screening, and criminal background checks, preparing the lease and move-in package, and ensuring a smooth resident move-in and lease signing., • Inspects apartments prior to resident move-in and ensures apartments are in move-in ready condition and schedules any outstanding item to be addressed with the maintenance team., • Stays informed about current market and competitor conditions that may impact the community's occupancy and sales results, develops and implements short- and long-term marketing plans and goals to sustain occupancy, and follows the property's established policies related to concessions, specials, and other programs to boost occupancy., • Designs and executes offsite marketing activities to create and drive traffic to the property, including implementing resident referral and employer outreach programs, using internet marketing tools (Facebook, Instagram, e-mail, and other websites), and following other property-specific marketing plans, drives, and special programs., • Uses the on-site property management software application (Yardi, etc.) to track apartment availability, record traffic and leasing activities, manage resident and prospect data, and capture critical demographic and other information about existing and future residents., • Ensures that the property and show units meet the Company's standards for show quality by daily inspecting the marketing corridor and leasing tour, communicating maintenance and upkeep needs to the property's maintenance team members, merchandising and ensuring a physically appealing show unit and/or model and amenities, and preparing the leasing office for daily leasing activities., • Follows-up with prospects and new residents to ensure satisfaction by sending e-mail, thank-you notes, and cards or making telephone calls or other contacts to finalize decisions to lease and/or renew., • Executes and performs activities in support of the property's lease renewal program by preparing and delivering lease renewal letters and packages for residents, meeting with and contacting renewing residents in advance of move- out dates and ensuring that lease renewal documents are signed and implemented on time., • Responds quickly and courteously to resident and client/owner concerns and questions and takes prompt action to solve problems and/or documents and convey resident or other requests to the appropriate individual(s). This includes the ability to work in a stressful environment and work peacefully with co-workers and residents., • Completes various accounting, financial, administrative, and other reports and performs other duties as assigned or as necessary. This position is scheduled for 40 hours in a regular work week. Hours of operation vary by site, but typical sites are open from 9:00am to 6:00pm Monday through Friday, Saturday 10:00am to 5:00pm, and on Sunday 1:00pm to 5:00pm. Marketing Representatives must be available to work on weekends when scheduled and must be able to perform the essential job functions unaccompanied. Qualifications: To perform this job successfully, an individual must be able to perform each duty satisfactorily. The requirements are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Employment history that demonstrates the application and usage of a sales, marketing, internet and customer service background sufficient to resolve customer complaints and issues and complete financial records, documents, and reports. High school diploma or GED equivalent is required. Language Ability: Ability to read, write, and communicate effectively to comprehend and complete legal documents, sell and explain apartment features, and answer questions. Ability to write routine reports and correspondence. Math Ability: Mathematical skills necessary to add, subtract, multiply, and divide numbers, decimals, and fractions, and calculate percentages in order to complete financial records, budgets, and other fiscal reporting information. Reasoning Ability: Ability to apply sales skills, such as generating sales leads, conducting sales presentations, qualifying prospects, and closing sales. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Proficiency in word processing, property management applications (preferably Yardi), and spreadsheet management programs in order to complete required reports and employment documents. Proficiency and fluency in using the internet for marketing, advertising, and sales-related circumstances, including using Google and other search engines, and navigating the internet and websites. Certificates and Licenses: Industry certifications are appreciated. Current valid drivers license is required. Supervisory Responsibilities: This job has no supervisory responsibilities. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, type, handle or feel objects, talk, and hear. The employee is frequently required to stand; walk; reach with hands and arms, climb, stoop, and squat. The employee is intermittently required to sit. Incumbents must be able to physically access all exterior and interior parts of the property and amenities. Must be able to operate golf carts at properties with golf carts, walk extended distances and navigate stairs to multiple levels daily. Marketing Representatives must be able to push, pull, lift, carry, or maneuver weights of up to twenty (20) pounds independently and fifty (50) pounds with assistance. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Routine, local travel may be required to attend training classes, conduct market research, or other situations necessary for the accomplishment of some or all of the daily responsibilities of this position. Routine, local travel may be required to attend training classes or other situations necessary for the accomplishment of some or all the daily responsibilities of this position. Powered by JazzHR gq5G7szVWZ

Job DescriptionAbout Lyra Lyra Health is the leading provider of mental health solutions for employers supporting more than 20 million people globally. The company has delivered 13 million sessions of mental health care, published more than 20 peer-reviewed studies, and delivered unmatched outcomes in terms of access, clinical effectiveness and cost efficiency. Extensive peer-reviewed research confirms Lyra’s transformative care model helps people recover twice as fast and results in a 26% annual reduction in overall healthcare claims costs. Lyra is transforming access to life-changing mental health care through Lyra Empower, the only fully integrated, AI-powered platform combining the highest-quality care and technology solutions. About the Role Lyra is committed to addressing urgent and costly mental health needs with specialized support where it’s needed most. Our Center of Excellence for Neurodiversity offers neuropsychological assessments, diagnosis, with tailored care for ADHD, and support for autism and learning differences. We are looking for a contract Neuropsychologist who is passionate about whole-person, whole-family mental health care. This contract role is a great fit for providers who enjoy working in a collaborative team environment, including the patient’s psychologist, therapist, and/or psychiatrist. Traits for success include: Results driven, detailed, process oriented, and comfortable with data. Candidates with an independent work ethic who are flexible and adaptable, we encourage you to apply. What You’ll Do: • Provide comprehensive neuropsychological evaluations for clients of all ages, in collaboration with their families and/or other collateral sources, • Interpret a wide variety of psychological and neuropsychological test batteries, with occasional direct test administration, • Serve as a subject matter expert in the use and interpretation of neuropsychological assessments, • Supervise and oversee the work of the patient’s assigned psychometrist to ensure accurate and reliable data collection, • Complete detailed neuropsychological evaluation reports and prepare separate brief summary documents tailored for clients, families, and referring providers, • Conduct clear, supportive feedback sessions to explain findings, diagnoses, and personalized recommendations, • Collaborate with the patient’s care team (psychiatrist, care manager, and/or mental health wellness coach) to inform and coordinate treatment planning, • Comfortable completing in-person and virtual sessions with patients and their familiesRequirements:, • Doctorate degree in Psychology from an American Psychological Association accredited program, • One year predoctoral internship with specialization in neuropsychology preferred, • Two year postdoctoral fellowship with specialization in neuropsychology preferred, • An equivalent combination of experience, supervision, or training will be considered on a case-by-case basis, • Licensed in California or New York preferred, • PSYPACT authorized or PSYPACT eligible preferred, • Experience conducting testing virtually and in person, • Familiarity with online web-based applications, • Effective therapeutic communication skills, • Able to deliver care virtually or in person and within your own office space, • Candidates must successfully pass a drug screen and background check for this opportunityHere are some of the advantages of joining the Lyra + Bend network:, • Connect with highly compatible clients who are a good fit for your clinical expertise, • Set your own schedule, without a minimum hours requirement, • Focus less on the administrative burden of billing with Lyra’s paperless billing and quick payment turnaround, • Have peace of mind with Lyra’s 24/7 Care Navigation team for client crisis support, • Access to a robust offering of live and recorded CE credited courses (approved by APA, ASWB, and NBCC)

Job Description Position Specifics: Department: Service Reports to: Service Manager or Service Location Manager Supervises: None Purpose: Assist the service manager in maintaining accurate and on-time reports and records relative to the service department’s operation within the dealership. Responsible for selling, receiving, and delivery of parts and accessories. In addition performs in-store customer service and stocking duties. Responsibilities: • Fields internal and external customer inquiries to the Service Department, • Promotes and sells products and/or services to meet customer needs, • Supplies Service Technicians with parts as required, • Opens work orders as directed by the Service Manager/Shop Foreman and maintains control until they a closed and invoiced, • Maintains the service library with current information (for example, files, bulletins, manuals, multi-media, etc.) under the direct supervision of the Service Manager, • Maintains Service Department filing and records, • Updates customer profiles using equipment, hours, or other information from the customer work orders, • Maintains accessories and supplies and prepares replacement orders, • May prepare Service Technician efficiency reports, • May process warranty and/or product improvement claims including the computation of charges, submission, and follow up Experience, Education, Skills and Knowledge: • Basic knowledge of accounting practices, • Ability to use and understand desktop load applications such as Microsoft Office and internet functions, • Knowledge of office procedures, • General understanding of mechanical/technical terms is preferred SIq1jluvdO

Job DescriptionSummary of Primary Functions: Dobbs Equipment is seeking a Wash Rack Specialist & Facilities Maintenance. This position is responsible for performing washing and cleaning of equipment inventory. Essential Functions and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. (Other duties may be assigned) • Work alone with a limited amount of supervision., • Prepare all reports and forms required in conjunction with job assignments., • Washes and cleans machines and equipment., • Inspects and performs check-out and check-in procedures., • Documents equipment condition before and after utilization., • Assists with routine inspections, minor repairs, and general maintenance., • Maintains equipment inventory systems per standard operating procedure., • Responsible for maintaining the condition of wash rack sump and separator tanks to ensure wash rack complies with environmental standards., • Assists in preparing and packaging shipments; delivery of parts and components to customers as needed., • Works safely always and adheres to all applicable safety policies; complies with all company policies, procedures, and standards., • Requires regular and punctual employee attendance., • Performs other duties as assigned., • Participate in all training programs as directed by the Service Manager., • Maintain a clean work area and perform work in a neat and orderly fashion., • Bring to the attention of the Service Manager any shop tools, equipment or vehicle that is not in a serviceable condition or is unsafe to use., • Always conduct self to present a professional image of the dealership., • Valid Driver’s License and maintain a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Ability to perform basic repairs and required maintenance using special tools and equipment following Technical Manual procedures, • Associate degree or equivalent from two-year college or technical school or a minimum of 2 years related experience and/or equivalent combination (preferred)., • Stay current with technical changes., • Proficient knowledge of mechanical, electrical, and hydraulic systems., • Maintains current product knowledge of John Deere and competitive products., • Forklift Certification (preferred)., • Ability to communicate effectively with teammates., • Strong problem-solving skills., • Excellent time management skills., • Must be able to self-manage/self-motivate., • Flexible schedule (sometimes weekends or overtime)., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals., • Ability to write diagnosis and work completed on routine reports and correspondence., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Develop skills in disassembly, assembly and repair of components and machines., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Quick learner with the ability to think out of the box., • Overnight travel less than 5% (Training). While performing the functions of this job, the employee regularly works in a service shop setting and is exposed to frequently changing temperatures, wet or humid conditions, noise, vibration, fumes, odors, dust, and close proximity to moving mechanical parts. Physical Demands: The physical demands described here represent those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is continuously required to: • Ability to work using Personal Protective Equipment, including respirators, welding shields, hard hats, vests, safety glasses, goggles, gloves and etc., • Ability to use full range of motion for back, arms, hands, and fingers., • Able to use full range of motion for both legs, including climbing, twisting, squatting, and pushing with both legs., • Able to use hand tools, fuel hoses, lubrication systems on all equipment, • Able to climb onto or down from mobile construction equipment, typically 3-4 feet of climbing, for service and inspection., • The employee is frequently required to lift or carry loads greater than 50 lbs but less than 75 lbs., • Specific vision abilities required by this job include close, distance and color vision. Dobbs Equipment is an Equal Employment Opportunity (EEO) and Affirmative Action employer. We are committed to providing an environment free of discrimination, harassment and retaliation both for our employees and applicants. We make all employment related decisions on the basis of an individual’s qualifications and job performance. We recruit, hire, promote, train, transfer, and make compensation decisions without regard to race, religion, color, creed, national origin, ancestry or citizenship status, sex, sexual orientation, gender, genetic information, marital status, pregnancy status, age, disability, protected veteran status, or any other characteristic protected by federal, state or local law. Notice to Applicants: We participate in E-Verify in the United States. Drug Free and Alcohol-Free Workplace Notice. Dobbs Equipment is an Equal Opportunity and At-Will Employer.

Job DescriptionDescription: Join the MHI Team as a Shop Service Technician! Material Handling Inc., a leading forklift and material handling equipment provider in the Southeast. For more than 45 years, we've been thriving, and we want you to be a pivotal player in our team of over 200 employees --- spanning ten branches across AL, GA, KY, TN, and SC. At MHI, we're all about family values and hard work. We will strive to be the best overall partner supplier to all our clients, to provide opportunity for every employee to reach their full potential and maintain sustained profitability through honesty, integrity and doing the right thing. As a privately held company, we maintain the freedom to prioritize our people by upholding our culture and values while remaining competitive in the marketplace. We're seeking dedicated, collaborative individuals who thrive on tackling new challenges daily. We recognize that our employees are fundamental to our success, and we're dedicated to fostering a work environment that enables our team to reach their fullest potential. It's not just a job, it's a career. What You'll Do: • Schedule assigned manpower and equipment necessary to fulfill department assignments., • Instruct and familiarize employees with branch practices, procedures, and equipment., • Responsible for the Quality of Work performed by technicians in the Service Shop., • Assist in the training and development of the Service Department technicians while in the Service Shop., • Recommend new methods and procedures which would improve technician efficiency and/or morale., • Match employees with specific tasks based on their skill or expertise., • Explain how to complete tasks; make sure technicians know safety and security rules., • Audit PM and Repair work., • Inspect material shipped into or out of the department or shop area., • Offer time and material estimates assisting Service Manager with quotes and ensuring quoted repairs are completed on-time and within budget., • Responsible for maintaining good housekeeping, safety, and working conditions within the department or area., • Adhere to all OSHA, company, and customer safety procedures., • Supervise the maintenance of machines, equipment, and facilities in assigned department or area., • Attend formal training as scheduled and directed by the Service Manager., • Maintain discipline of employees within assigned in accordance with established rules and regulations and initiate appropriate action to enforce these rules and regulations., • Assist with customer problems arising in the field or shop., • Prepare reports, maintain necessary records and perform other related duties as directed., • Valid Driver’s License with a clean driving record., • Knowledge of industrial equipment maintenance and operation., • Proficiency in mechanical, electrical, and hydraulic systems., • Forklift Certification preferred., • Effective communication and problem-solving skills., • Excellent time management and self-motivation., • Knowledge and able to maintain a safe and clean work environment, • Ability to read and interpret documents and follow instructions., • Mathematical skills for basic calculations., • Quick learner with a creative approach., • Overnight travel less than 5% (Training)., • Ability to operate and utilize basic technology and software. Work Environment: • Service shop setting with exposure to varying environmental conditions., • Close proximity to moving mechanical parts., • Use of Personal Protective Equipment. Physical Demands: • Full range of motion required for various tasks., • Ability to lift loads exceeding 50 lbs., • Specific vision abilities necessary., • Health Insurance – three different plans to choose from, • Voluntary Dental Insurance, • Voluntary Vision Insurance, • Company Paid Life Insurance, • Additional Life Insurance if desired, • Short & Long-Term Disability Overtime pay for any hours worked beyond 8 per day If you're enthusiastic, eager to learn, and have a desire to contribute to a team that values safety and customer service, we encourage you to apply for this position.

Job DescriptionProduction Manager - Bathroom Construction Company Position: Production Manager Location: Douglas, GA Employment Type: Full-Time About Us: We are a leading bathroom construction company seeking a dedicated Production Manager to oversee all post-sale operations. If you thrive in a dynamic environment and excel at problem-solving, this role is for you! Who we are looking for: The ideal candidate will have previous construction and management experience with a track record of accomplishing goals. They will posses the ability to delegate responsibilities to others but be willing to jump in and help when the situation calls for it, recognize and solve problems on the fly, follow and improve processes, hold employees to a standard, be able to resolve conflict and represent the company in a professional manner. Responsibilities: • Facilitate all activities following a sale all the way to installation and service after installation., • Hire, delegate to and manage employees including: Measure Tech, Warehousing/Material Procurement, Installers and Service Techs., • Ensure customers are met within 1-3 days post-sale to confirm contract details, align customer expectations with installation plans, and verify accurate measurements for custom parts. (Measure Tech), • Oversee the timely ordering and staging of materials in the warehouse, ensuring installers have clear access and understanding of components and expectations of the project., • Manage customer expectations upfront, setting clear timelines and mutual responsibilities., • Maintain regular communication with customers (or delegate to team members) from sale to installation, updating them on material orders and shipping and expected installation timeline., • Evaluate staff and installer performance, coach for reliability, and manage hiring/firing to maintain a capable, fully staffed team., • Ensure jobs are completed on time, to our standard, and paid immediately upon completion., • Submit weekly pay numbers for the department.Requirements:, • Proven problem-solving skills and ability to work independently without micromanagement., • Strong organizational and communication skills., • Experience in construction management., • Ability to train and lead a team effectively.What We Offer:, • Competitive salary and benefits., • Outstanding Performance bonuses (based on monthly dollar value of installations, number of service related issues, customer satisfaction, installation pay rate, and collectables outstanding.), • Opportunity to shape our production process and grow with a thriving company.