Trabajos plastics en Elizabeth, New JerseyCrear alertas

POSITION SUMMARY: The Stationary EquipmentTechnician performs repairs and maintenance on recycling equipment, compact heavy equipment and light trucks to maximize safe and productive operations. Typical repairs include, but are not limited to, routine maintenance and repair of hydraulic systems, industrial electrical systems, 480V balers, conveyor systems and compactors. PRINCIPAL RESPONSIBILITIES: • Diagnoses mechanical problems using charts, diagnostic software, technical manuals and expertise., • Performs repairs and maintenance on recycling equipment, compact heavy equipment and light trucks to maximize safe and productive operations., • Repairs or replaces parts, such as pistons, rods, gears, valves, and bearings, using mechanic's hand tools., • Replaces conveyor belts, electrical motors, hydraulic cylinders and other mechanical parts., • Reads and interprets VCRs (vehicle condition reports) and/or repair orders, communicates with supervisor and/or equipment operators for clarification of problems. May discuss preventive techniques with equipment users and vehicle drivers to minimize future repairs., • Completes paperwork associated with repairing vehicles, documenting parts usage, and accounting for applied times (work order times versus time card times)., • Complete daily consumables report to record hours, fuel and oil usage, and provide information for input in Republic Services Dossier (Fleet Management Software) system., • May repair and install plumbing, electrical and HVAC systems., • Follows all safety policies and procedures., • Performs repairs and preventative maintenance on rolling stock (forklift, skid steers, trailers and front loaders)., • Performs other job-related duties as assigned or apparent. PREFERRED QUALIFICATIONS: • PLC troubleshooting and problem solving ability with practical, mechanical and electrical aptitude., • Prior experience in a manufacturing environment., • Prior experience working with conveyors., • Valid driver’s license., • Mechanical or trade school certificate., • High school diploma or G.E.D. MINIMUM REQUIREMENTS: • Minimum of 1 year of related equipment maintenance and repair or trade school certification. Pay Range: $29.16 - $43.74 Bonus Plan Details (if applicable): Rewarding Compensation and Benefits Eligible employees can elect to participate in: • Comprehensive medical benefits coverage, dental plans and vision coverage., • Health care and dependent care spending accounts., • Short- and long-term disability., • Life insurance and accidental death & dismemberment insurance., • Employee and Family Assistance Program (EAP)., • Employee discount programs., • 401(k) plan with a generous company match., • Employee Stock Purchase Plan (ESPP). The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company. Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law. ABOUT THE COMPANY Republic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world. In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills. Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer. Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it. Our company values guide our daily actions: • Safe: We protect the livelihoods of our colleagues and communities., • Committed to Serve: We go above and beyond to exceed our customers’ expectations., • Environmentally Responsible: We take action to improve our environment., • Driven: We deliver results in the right way., • Human-Centered: We respect the dignity and unique potential of every person. We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGY Republic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation. With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers. Recycling and Waste We continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs. Environmental Solutions Our comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need. SUSTAINABILITY INNOVATION Republic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth. The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America. We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028. RECENT RECOGNITION • Barron’s 100 Most Sustainable Companies, • CDP Discloser, • Dow Jones Sustainability Indices, • Ethisphere’s World’s Most Ethical Companies, • Fortune World’s Most Admired Companies, • Great Place to Work, • Sustainability Yearbook S&P Global

Anesthesiology Physician at Jackson and Coker summary:. An anesthesiology physician locums job is available in North Jersey, offering flexible shift options and a diverse case mix, including general, OB, GI, orthopedic, and plastics procedures. Anesthesiology, CRNA, Locums Job, North Jersey, 12-hour

We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services. Republic Services Charitable Foundation and local community grants. The Republic Services Polymer Center is the nation's first integrated plastics

The Republic Services Polymer Center is the nation's first integrated plastics recycling facility. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Republic Services' strategy is designed to generate profitabl

Job Description North American Composites, a subsidiary of IP Corporation, has an exciting opportunity to lead our Northeast Sales team. We are positioned to have another year of strong growth and seek a strategic leader with a strong ability to build relationships to join our team. In this position you will lead a team of 5 Account Managers in the Northeast Market and be responsible for achieving revenue and profit expectations for the market. As the Regional Commercial Sales Manager for the Northeast, you will be responsible for developing and implementing sales strategies to achieve revenue targets and market share growth within the designated region. You will lead a team of sales professionals, fostering a culture of excellence and customer-centricity. Minimum Requirements: • Bachelor’s Degree or equivalent work experience., • 10 + years’ experience in business, sales or marketing with a preferred distribution sales background., • 3 years’ experience in managing sales and/or operations., • Proven leadership skills to train, direct and motivate personnel to achieve and maintain agreed upon stated goals and objectives., • Excellent verbal and written communication skills., • Strong planning and organizational skills., • High attention to detail and strong administrative management skills., • Skillful negotiation and presentation abilities., • Demonstrated ability of excellent customer service techniques including follow-through and resolution., • The ability to respond to changing work demands and environment in a positive manner, recognizing them as opportunities for personal and professional growth., • Creates a sense of teamwork among district associates., • High energy approach to business, and a desire to succeed., • Computer literacy and experience in MS office applications., • Ensure all personnel understand and follow all safety and regulatory requirements., • Accountable for all sales and distribution activity in the district, • Works with the Operations Supervisors to ensure successful management of the distribution center., • Travels with branch sales personnel and provides them with sales, pricing and technical assistance., • Assist sales personnel to determine customer product needs, processes, applications, and technical requirements., • Develop sales strategies to ensure that the stated goals and objectives are met., • Identifies potential new accounts through referrals, vendor leads, industry contacts, trade journals, etc., • Promptly follows up on action items, inquiries, credit issues, customer complaints, product problems, technical requests, and product evaluations, referrals, and industry leads., • Assists VP Business Manager East with preparation of annual sales forecasts and budgets. And controls sales expenses at the branch level by maintaining all controllable costs at or below approved budget amounts., • Ensures effective communication among division and corporate personnel., • Ensures a competent subordinate staff by planning and implementing ongoing development of personnel., • Represents the district at national and regional industry association functions as appropriate. Knowledge of markets for reinforced plastics and cast products, as well as a thorough understanding of vendors’ and distributors’ functions. North American Composites (NAC) distributes materials and equipment from leading suppliers to the marine and composites industry. We provide national coverage with local service though our 30 distribution centers in the U.S. and Canada. Each location serves our local customers with fast, efficient deliveries of the products they need. Our warehouses maintain inventories of all materials necessary for composites manufacturing: resins, gel coat, fiberglass, catalyst, adhesives, cores, putties, and many others. NAC local salespeople are knowledgeable and CCT certified to ensure the best possible service to every manufacturer. #LI-IPCORP

We contribute to the company's waste reduction targets through their support of related in-store initiatives, such as our in-store recycling program, following inventory management guidelines to reduce product waste, and eliminating the purchase of single-use plastics, as well as by promoting our re

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website:

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic to join our maintenance team and help keep our production running smoothly. Responsibilities: * Troubleshoot, maintain, and repair plastic processing machinery and equipment * Perform preventative maintenance on machines to ensure optimal performance * Assist with equipment setup, changeovers, and calibration * Maintain maintenance logs and records * Ensure safety standards are followed at all times Requirements: * Mechanical experience in an industrial or manufacturing setting * Familiarity with plastic processing equipment is a plus * Strong problem-solving skills * Ability to work independently and as part of a team * Must be reliable and safety-conscious

Formosa Plastics is a privately held company headquartered in Livingston, New Jersey. Company Overview for Formosa Plastics Corporation, U. Founded in 1978, Formosa Plastics Corporation, U.

CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset #DiedreMoire #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobpost

Cintas Corporation - JobID: 1339023100 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

Title: Polymer Process design Engineer.I am seeking a very experienced Engineer – to drive Process Design in my organization.I am compiling a variety of skill sets – but should be a.Chemical Engineering or Polymer Engineer educational background.Process Design from idea to qualification.Liquid a

Specifically looking for a material engineer to help develop a maintain new technology.Attend onsite meetings (timelines, development work, etc.Perform visual inspections from recent trials.Monitor injection of new tools.Verify heat rate specifications for accuracy.Improve heat treat recipes for bet

Partners Personnel - JobID: jamesburg-material-processor [Warehouse Associate / Package Handler] As a Material Processor at Partners Personnel, you'll: Coordinate the receipt and storage of materials efficiently; Inspect incoming materials for quality and accuracy; Operate machinery to process mater

Cintas Corporation - JobID: 1331161400 [Production Operator / Assembly Line Worker] As a Production Associate at Cintas, you'll: Be responsible for preparing bundles for delivery as required by the customer; Perform product folding manually by hand or through use of an industrial garment folding mac

LMT Mercer Group, Inc was formed in 1987 and supplies the vinyl and wood composite fence and deck industry with high quality component parts.LMT Mercer Group is looking for Processing Technician Job Summary:.Responsible for performing highly diversified duties related to the establishment and mainte

Thorlabs is pleased to play a role in advancing science through the components, instruments, and systems we design and manufacture.We believe that science and innovation have great potential to improve the world around us and are committed to advancing photonics (i.Via educational outreach and more

Seeking Assemblers for the Air Conditioning and/or Blower assembly lines.The candidate hired for this position will assemble electro-mechanical components, sub-assemblies, and/or units.Schedule: Monday to Friday (one shift), 7:00am - 3:30pm (40 hours/week).Read procedures, wiring diagrams, and produ

Kessler Institute for Rehabilitation Position: Materials Technician Location: 1199 Pleasant Valley Way, West Orange, NJ 07052 Schedule: Per Diem (PRN), Flex Hours: 7AM-3PM/8AM-4PM/8:30-4:30PM Compensation: $21.Our inpatient rehabilitation hospital is committed to providing exceptional and compassion

Staffmark - JobID: 1962774 [Production Operator / Assembly Line Worker] As a Production Worker at Staffmark, you'll: Pull order form to determine required product for production; Pull product from warehouse and deliver to production floor; Wrap skids, measure product, and inspect product for quality

Are you ready to shape the future of plastics manufacturing? We’re looking for a. Bachelor’s degree in Engineering (Mechanical, Plastics, Manufacturing, or related).

Proven experience scaling synthetic polymer processes for medical device or pharmaceutical applications.Proficient in troubleshooting, process optimization, and statistical analysis for process control.Excellent analytical and creative problem-solving abilities.Strong communication, analytical think

R&D Circuits, a member company of Advantest America, Inc.Advantest Corporation (a Tokyo Stock Exchange listed company).For over 50 years, R&D Circuits has been a leader in the printed circuit board industry.Review setup, blueprints, and work order instructions to determine plating requirements and e

Optimization of extrusion protocols for biothermoplastics used in 3D printing, including PHA. Experience with a range of biomaterials, including bioplastics such as PHA.

Cutting edge leading plastics manufacturer. My client is a leading custom plastics molding company specializing in blow molding, injection molding, and assembly services.

The Raw Materials Associate supports the full lifecycle of fabrics and trims across Retrofête and Seroya, ensuring materials are developed, tracked, approved, and delivered on schedule.This role bridges creative and technical functions, maintaining precision and clear communication across teams and

The Senior Logistics Technician is responsible for performing all raw material goods receipt for valid Purchase Order execution within ERP; both non-batch, batch and quality managed batch-controlled material.Further responsible for the post goods receipt put away, storage and order picking of all wa

Under supervision, prepare and apply plastering materials to interior and exterior surfaces; perform related work.Examples of typical tasks include:.Prepare and apply all plastering materials which include Fireproofing, Soundproofing, and all types of Cement Stucco, E.Using a hawk and trowel, apply

Under supervision, prepare and apply plastering materials to interior and exterior surfaces; perform related work.Examples of typical tasks include:.Prepare and apply all plastering materials which include Fireproofing, Soundproofing, and all types of Cement Stucco, E.Using a hawk and trowel, apply

Saint-Gobain, a global top employer, is looking for a Material Handler in the Wayne, NJ Plant.This hands-on role involves maintaining accurate inventory, preparing shipments, and ensuring compliance with standard operating procedures (SOPs) and work instructions.If you thrive in a fast-paced environ

The R&D Senior Engineer reports directly to the Senior R&D Manager and is responsible for delivering technical excellence in the area of applied material sciences within the IDS R&D organization.The R&D Senior Engineer will drive activities supporting the development, verification, and continued per

This position is for a Material Handler to work on-site in the stockroom.Pull and pick material for production kits.Fill material requisitions from the production floor.Properly label and identify material.Maintain inventory records using MRP/ERP system.Locates, and transfers part shortages within t

My client is a leading custom plastics blow molding company specializing in blow molding, injection molding, and assembly services. Bachelor's degree in Plastics Engineering, Mechanical Engineering, or related field preferred (or equivalent experience).

Berry Global - JobID: 37341 [Maintenance Mechanic] As a Molding Technician at Berry Global, you'll: Operate molding machines to produce high-quality plastic products; Monitor machine settings and make adjustments as needed; Inspect finished products for defects and ensure they meet quality standards

Engineer - Plastics, Electrical, or Mechanical - Unique Entrepreneurial Opportunity Location: Ewing, N. We are seeking a local dynamic and entrepreneurial Engineer specializing in Plastics, Electrical, or Mechanical engineering to join (or possibly lead) our team. Bachelor's degree in Plastics

Primary Posting Location : City.Primary Posting Location : State/Province.Primary Posting Location : Postal Code.Primary Posting Location : Country.At our Company, we grow People, Brands, and Businesses!.Replenishment Manager who will align and develop resources to achieve objectives and financial r

As the Plastics Manufacturing Operations Supervisor, you’ll guide a large shift team, coordinate production plans, uphold quality, and communicate with leadership to drive continuous improvement across the floor.

Inrad Optics, a Luxium Solutions company, is seeking self-motivated individuals to add to our growing team of Optical Technicians.In this position, you will set up, operate, and maintain various spindle polishing machines to perform precision beveling, grinding, lapping and polishing of optical mate

Evaluate materials and recommend suitable thermoplastics based on mechanical, thermal, and aesthetic requirements. Qualifications: Bachelor's degree in Mechanical Engineering, Plastics Engineering, or related field. For immediate considerat

Liquid Chemical Packaging Technician (MES/SAP) .Step onto the production floor and join a tight-knit crew dedicated to precision.You’ll prepare containers, validate materials, and run fills with care.You’ll navigate between a Weight Assisted Computer (WAC), our Manufacturing Execution System (ME

Elgen Manufacturing, a Worthington Enterprises company, is a recognized leader in HVAC and sheet metal manufacturing.In partnership with our distribution arm, we deliver high-quality, cost-effective HVAC hardware, accessories, and fabricated sheet metal components to contractors, fabricators, and re

Supervisor Floater for Central New Jersey.Shifts Available: Schedule Varies.Must have supervisory experience.Must be able to conduct physical tours throughout the shift.You will also be eligible for excellent benefits including.Are you interested in pursuing a career in this growing industry? Would

Responsibilities: Lead and perform setup and operation of injection molding machines and auxiliary equipment Supervise and guide process technicians during mold changes, startups, and troubleshooting activities Opti