Offres plastics à San Diego, CaliforniaCréer des alertes d'emploi

The role You are the bridge between our engineering team and our manufacturing partners. You speak EE, ME, and embedded software well enough to push back on a designer when their part choice creates a sourcing or yield nightmare. You speak factory floor well enough to walk an SMT line in Shenzhen and know whether the operator is doing it right. This is not a procurement role. We are not looking for someone whose primary skill is issuing POs, managing supplier portals, or running ERP. You will own purchasing, but it is downstream of the real work, which is turning engineering intent into a manufacturable, testable, shippable product, and then keeping that product flowing. You will own the BOM, drive NPI through pilot and production ramp, run our CM relationship in Asia, and be the person the CEO and engineering leads turn to for ground truth on cost, yield, lead time, capacity, and risk. If a component has a 40 week lead time and nobody flagged it, that is on you. If a CM misses a DPPM target, that is on you. If we ship on time, that is on you too. The product, so you can self select • Small electronic device: SoM based compute, camera modules, sensors, plastic enclosure, cable assemblies, packaging, • BOM in the low to mid hundreds of line items, • BOM cost in the low hundreds of dollars per unit, • Annual volume scaling from low thousands toward tens of thousands of units in years one and two, • Manufactured at an EMS in Asia today; North American final assembly and test on the roadmap If you have run manufacturing for cars, aircraft, ships, satellites, buildings, oil and gas equipment, or any other multi million dollar capital good, this is not the right role for you. The cadence, decision making, supplier landscape, and unit economics are entirely different. We will not interview for that experience. What you will do • Be the technical interface between engineering (EE, ME, embedded) and our CM. Translate design intent into manufacturable reality and drive DFM and DFT feedback back into engineering., • Drive NPI: EVT, DVT, PVT builds, yield ramp, test station bring up, first article inspections., • Own the BOM: part numbering, revisioning, ECO process, AVL, alternates, lifecycle management., • Source components, qualify suppliers, and negotiate pricing, with priority on critical, long lead, and sole sourced items., • Manage our existing CM in Asia through ramp, and qualify the next CM partner as we scale., • Live on factory floors during builds, domestically and internationally, often, in person., • Set and hit targets for landed cost, DPPM, OTD, FPY, and inventory turns., • Build supplier scorecards, dual source critical components, and forecast component demand against the sales pipeline., • Own logistics, customs, freight, and the path from finished goods to dealer receiving dock. Required • Professional working fluency in Mandarin or Cantonese. Non negotiable. You will be the only person in the room who can follow what is actually being said. Hard filter, see top of post., • 5+ years (or equivalent shipping experience) owning manufacturing or NPI for small electronic or electromechanical products: consumer electronics, IoT, in cabin automotive electronics, sub $2,000 medical devices, prosumer hardware. Not aerospace, not automotive OEM, not heavy equipment, not industrial machinery, not construction. Equivalent experience means you have personally taken multiple products from prototype to volume production, even if your title did not always say so., • Hands on BOM ownership of a product with 100+ line items, taken from prototype through volume production., • Direct, recent experience qualifying and managing EMS or ODM partners in Asia (Shenzhen, Dongguan, Suzhou, Taiwan, or Vietnam). You can name the CMs you have worked with and the products you shipped with them., • You can read a schematic, redline a mechanical drawing, and have an opinion about an FAI report., • Willingness to travel internationally. Multi week trips to Asia during NPI and ramp are part of the job., • Valid US driver's license., • San Diego based or willing to relocate. On site at our office. Strong plus • Prior seed to Series A hardware startup experience. You have personally taken a product from zero to first customer shipment., • ADAS, dashcam, telematics, or other in vehicle electronics experience., • Existing relationships with EMS partners, PCBA houses, plastics vendors, or component distributors in Asia., • SoM and carrier board architectures, camera modules, or optical tuning supply chains., • APICS CPIM or CSCP, or equivalent. Useful, but does not substitute for hands on experience. Compensation • Base: $135,000 to $155,000 depending on experience, • Equity: meaningful early stage grant, • Health, dental, vision, • Relocation assistance for the right candidate

Job DescriptionDescription: POSITION SUMMARY The Facilities Technician I performs a broad range of facility maintenance, repair, and support activities to keep the facility safe, clean, functional, and compliant. This role handles general building systems and infrastructure while developing foundational knowledge in preventive maintenance, production equipment support, and life-safety systems. The Facilities Technician I works under the direction of the Facilities Manager and collaborates closely with operations, environmental health and safety, and other internal teams. ESSENTIAL JOB FUNCTIONS The following duties represent the primary responsibilities of this role. Other duties may be assigned as needed in support of the department and the company. • Log, create, and track work orders in the Computerized Maintenance Management System (CMMS); maintain accurate and up-to-date records for all facility-related activities., • Research parts, materials, and vendor options to support facility maintenance and repair needs; coordinate with purchasing to ensure adequate supply levels for janitorial and other facility services., • Manage spare parts inventory, including receiving, organizing, and tracking stock to support ongoing maintenance activities., • Perform general facility maintenance and repairs on buildings and infrastructure, including drywall, plumbing, basic electrical, and pneumatic systems., • Maintain the grounds in a clean and organized condition; keep trash and plastics off the ground and in designated waste containers., • Ensure facility and storage areas are clean, organized, and compliant with applicable safety standards., • Maintain and oversee hazardous waste storage areas, report containers ready for collection, and keep accurate records in accordance with regulatory requirements., • Ensure contractors and visitors adhere to company policies and safety requirements; provide Personal Protective Equipment (PPE) as applicable., • Assist with special projects such as office relocations, furniture setups, and event preparations., • Support scheduled preventive maintenance (PM) activities and assist senior technicians with unscheduled repairs as directed., • Collaborate with the Environmental Health & Safety team to maintain a safe and compliant work environment., • Identify and communicate facility improvement opportunities to meet functionality, cleanliness, and appearance standards., • Participate in continuous improvement projects and 5S-related performance teams and initiatives., • Adhere to all safety rules, regulations, and PPE requirements. Other duties as required in support of the department and the company. SUPERVISOR RESPONSIBILITIES The responsibilities of this role do not include supervising other employees. QUALIFICATIONS To succeed in this job, an individual must satisfactorily perform each essential job function. The requirements below represent the required knowledge, skill, and ability. Reasonable accommodations may be made to enable individuals with disabilities to perform basic functions. Education & Experience • High school diploma or equivalent required; vocational or technical training in a related field preferred., • 3 years of experience in facilities maintenance, building trades, or a related field preferred., • Basic knowledge of plumbing, electrical, drywall, and pneumatic systems., • Familiarity with CMMS software and work order management is a plus., • Experience in a manufacturing or industrial environment preferred, • Familiarity with 5S methodology and continuous improvement practices preferred. CERTIFICATES, LICENSES, REGISTRATIONS · Valid driver’s license. · Forklift certified. LANGUAGE REQUIREMENTS · Excellent verbal and written communication skills in English. · Conversational in any other language is a plus. Knowledge, Skills & Abilities -Basic proficiency in Microsoft Office Suite, including Word, Excel, and Outlook; comfortable with data entry, basic spreadsheet tracking, and email communication. -Familiarity with CMMS platforms for logging and tracking work orders; willingness to learn and adopt new software tools. -Comfortable using the internet and vendor portals to research parts, pricing, and availability. -Working knowledge of hand tools, power tools, and basic measurement instruments. -Basic understanding of facility systems including plumbing, electrical, drywall, and pneumatic systems. -Ability to follow work orders, maintenance instructions, and safety documentation; willingness to develop skills in reading schematics and OEM manuals over time. -Familiarity with safety protocols including PPE requirements, Lockout/Tagout (LOTO), and hazardous waste handling practices. -Basic awareness of Total Productive Maintenance (TPM) and 5S principles preferred. -Clear and effective communicator; able to relay information accurately in verbal and written formats. -Works well in a team environment and takes direction from senior technicians and supervisors. -Strong attention to detail and commitment to accurate recordkeeping and work order documentation. -Organized and able to manage multiple tasks and prioritize effectively throughout the workday. -Reliable, accountable, and proactive in identifying and reporting facility issues. PHYSICAL DEMANDS The physical requirements outlined below indicate those necessary to fulfill this position's core responsibilities. While performing job duties, the employee will regularly engage in activities such as using hands to finger, handle, or feel and communicating verbally. Additionally, the employee will frequently need to reach with hands and arms while standing and walking as part of the role. Occasional lifting and movement of objects weighing up to fifty (50) pounds and using a ladder may be required. This position also demands specific vision capabilities, including close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Reasonable accommodation will be provided according to ADA regulations to enable individuals with disabilities to perform the job's essential functions. WORK ENVIRONMENT Manufacturing environment: A work environment in a manufacturing plant is the physical and social setting where goods production occurs. Depending on the type of product, process, and plant, the work environment may vary in terms of noise, temperature, safety, and demand. Common characteristics of a work environment in a manufacturing plant are the use of machinery and exposure to hazards such as chemicals, heat, dust, or noise, with a culture of teamwork, communication, and continuous improvement. ENVIRONMENTAL POLICY Providien Thermoforming is fully committed to minimizing the environmental impact of its operations, activities, and products. To achieve this, we adhere to all applicable environmental regulations and laws, prevent pollution, and continuously improve our environmental performance in all our global operations. This is possible through an Environmental Management System that provides a framework for setting and reviewing our environmental objectives and targets. We aim to identify and reduce any negative environmental impact our business activities may have. PERSONAL PROTECTIVE EQUIPMENT REQUIREMENTS • ASTM F–2412–2005, ANSI Z41–1999, or ANSI Z41–1991 rated safety toe shoes in specific areas., • Clear ANSI Z87.1 safety-rated glasses in specific areas., • Hearing protection in specific locations., • Ability to compile with JSA in specific areas. TRAVEL Travel is not required for this position. SALARY INFORMATION According to several states' laws, this position's salary range falls between $20 and $35 per hour. However, this salary information is merely a general guideline. When extending an offer, Providien Thermoforming considers various factors such as the position's responsibilities, scope of work, candidate's work experience, education/training, essential skills, internal pay equity, and market considerations. Requirements:

Location: Beverly Hills, CA Senior Certified Surgical Technologist (ASC – Multi-Specialty Experience Required) A Senior Certified Surgical Technologist with minimum 5+ years of experience is sought to join our operating room team at a state of the art ambulatory surgery center in Beverly Hills, California. We are looking for a highly skilled, dependable professional who is already proficient across multiple surgical specialties and can operate with minimal oversight in a fast-paced ambulatory surgery center environment. The ideal candidate demonstrates strong clinical judgment, leadership ability, and ownership over surgical workflow, instrument management, and OR efficiency. Key Responsibilities • Operating Room Excellence, • Prepare and set up operating rooms with strict adherence to sterile technique, • Scrub and assist in a wide range of procedures, anticipating surgeon needs with efficiency and precision, • Perform accurate surgical counts with the circulating nurse, • Ensure smooth room turnover and maintain OR readiness between cases, • Multi-Specialty Surgical Support, • Independently scrub cases across:, • Spine, • Orthopedics, • Pain management, • Plastic surgery, • Hand surgery, • Podiatry, • Demonstrate familiarity with specialty instrumentation, implants, and workflows, • Sterile Processing & Instrument Management, • Inspect, assemble, and sterilize instruments according to protocol, • Operate autoclaves and maintain sterilization logs and biological monitoring, • Maintain strict compliance with infection control and regulatory standards, • Inventory & Case Coordination, • Manage and maintain surgical inventory levels, • Coordinate and update surgeon preference cards, • Ensure all instruments, implants, and supplies are available and ready for scheduled cases, • Organize and track specialty equipment and loaner trays Leadership & Accountability • Take ownership of OR efficiency and workflow, • Serve as a resource for team members and support staff, • Assist in maintaining a high-performing, organized, and compliant surgical environment, • Contribute to continuous process improvement and readiness for inspections Qualifications: • Certified Surgical Technologist (CST) required, • Minimum 5 years of scrub experience (ASC or hospital setting), • Proven experience across multiple specialties (spine, ortho, pain, plastics, hand, podiatry strongly preferred), • Strong knowledge of sterile processing, instrumentation, and infection control standards, • Demonstrated leadership ability and high level of accountability, • Highly organized with excellent attention to detail, • Ability to work independently in a fast-paced surgical environment Compensation and Benefits: $45.00-$55.00 per hour 401(k) Health insurance Paid sick time

Job DescriptionDescription: CNC Programmer 6721 Cobra Way, San Diego, CA, United States Full-time Company Description Welcome to CoreDux USA, a leading innovator in the machining industry located in the vibrant Sorrento Valley area of San Diego. As a rapidly growing company, we specialize in providing high-precision machining solutions that cater to a wide array of industries, including aerospace, automotive, medical devices, and consumer electronics. Our commitment to quality and excellence has earned us a reputation for delivering exceptional products and services to our clients. At CoreDux USA, we pride ourselves on our state-of-the-art facility, equipped with cutting-edge technology and advanced machinery, enabling us to meet the most demanding project requirements with unparalleled accuracy and efficiency. Our team of skilled professionals is dedicated to pushing the boundaries of innovation and delivering results that exceed expectations. As we continue to expand our operations, we are looking for talented and motivated individuals to join our team. We offer a dynamic work environment that fosters professional growth, collaboration, and creativity. If you’re passionate and eager to be part of a company that values innovation and excellence, CoreDux USA is the perfect place for you. Join us on our exciting journey and contribute to shaping the future of the machining industry! “At this time, we are unable to sponsor applicants for employment authorization. All candidates must be legally authorized to work in the United States without current or future need for employer sponsorship.” Job Description CNC Programmer Reporting To CNC Supervisor Department Production Salary $32 – $42 per hour (DOE) Role Objective We are seeking a skilled CNC Programmer to develop, edit, and optimize CNC programs for our precision machining operations. This role is focused on programming execution — translating drawings and 3D models into efficient, proven G-code for mills, lathes, and multi-axis machines, and supporting the shop floor through setup sheets, tool lists, and troubleshooting. Key Responsibilities · Create, edit, and optimize CNC programs (G-code) for mills, lathes, and multi-axis machines using CAM software. · Interpret engineering drawings, blueprints, and 3D models to generate accurate, production-ready machining strategies. · Build setup sheets, tool lists, and operator instructions to support consistent, repeatable machine setup. · Select appropriate cutting tools, feeds, and speeds based on material, geometry, and machine capability. · Prove out new programs at the machine and work directly with machinists to resolve setup and run issues. · Support First Article Inspections (FAI) and make program adjustments to meet dimensional and surface finish requirements. · Reduce cycle times and tooling costs through continuous optimization of existing programs. · Maintain program files, revision control, and supporting documentation for traceability. · Participate in continuous improvement initiatives related to scrap reduction, repeatability, and throughput. · Collaborate with Quality and Engineering to resolve recurring issues and improve process capability. Qualifications · High school diploma or GED; technical certificate or associate degree preferred. · 3+ years of CNC programming experience in a production or job shop environment. · Proficient with CAM software (Mastercam, Fusion 360, SolidCAM, or similar). · Strong working knowledge of G-code, post-processors, and CNC machine operation. · Ability to read and interpret blueprints, GD&T, and engineering specifications. · Hands-on experience with 3-axis and multi-axis (4/5-axis) machines. · Familiarity with a wide range of materials including aluminum, stainless steel, titanium, and plastics. · Basic CAD skills (SolidWorks, AutoCAD, or similar) to interpret and manipulate models. Additional Information Preferred Skills · Experience with Fanuc, Haas, Siemens, or Mazak controls. · Post-processor editing and customization experience. · Prior experience in aerospace, medical, or other AS9100/ISO 13485 regulated environments. · Familiarity with lean manufacturing and continuous improvement tools. Physical Requirements · Ability to lift up to 50 pounds. · Ability to stand for long periods and move between different workstations. · Ability to wear required PPE for extended periods. · Ability to work in a shop environment with exposure to noise, heat, and other manufacturing conditions. All your information will be kept confidential according to EEO guidelines. Diversity, Equity, and Inclusion (DE&I) Statement At CoreDux USA, we are committed to fostering a diverse, equitable, and inclusive workplace. We believe that diversity in our workforce enhances creativity, innovation, and problem-solving. We strive to create an environment where every employee feels valued, respected, and empowered to bring their authentic selves to work. Equal Employment Opportunity (EEO) Statement CoreDux USA is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, national origin, ancestry, citizenship status, age, physical or mental disability, medical condition, genetic information, military or veteran status, or any other characteristic protected by applicable federal, state, or local laws. We are dedicated to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. Benefits: · 401(k) · Dental insurance · Employee assistance program · Flexible spending account · Health insurance · Health savings account · Life insurance · Vision insurance · Long Term Disability Benefits · Short Term Disability Benefits · Paid Time Off · Birthday Lunches · Company Paid Holidays · School Visitation Leave · Leave for Organ / Bone Marrow Donor Recruiters and Staffing Agencies Thank you for your interest in our job opening, but we are not engaging recruiters for this position and will not respond to recruiter / agency inquiries. Requirements:

Job Description HOW TO APPLY - Go to and, fill out the application form on the bottom of the page. Basile Studio is in search of an experienced CNC Operator to join the team. In this role, you will be responsible drawing review, , operating various routers, water jet and CNC Laser. This candidate will possess extensive knowledge in programming and operating. Attention to detail, high quality work, and enthusiasm will make a candidate successful in this role! What are the key role responsibilities? • Plan machining by studying work orders, blueprints, customer specifications, & materials, • Maintain continuity among other operators by documenting and communicating actions, • Identify material requirements, pull from stock, load, and unload from equipment, • Verify settings by measuring positions, first-run part, and sample work pieces, • Supervise machine as it runs and make adjustments as needed – ensure parts are made as quickly and efficiently as possible while maintain quality standards., • Document actions by completing production and time logs, • Inspect finished product to ensure it meets quality standards, • Maintain safe operations by adhering to safety procedures and regulations, • High attention to detail, • Experience with Solidworks, AutoCAD VCarve (or other CAM Software), OMax, Lightburn Adobe Creative Cloud/InDesign. Experience with Fusion 360, CAMWorks, or Cabinet Vision would be a bonus., • Experience with Maxiem 1530 Water Jet, Sabre IS408 Router, Fiber Laser, Co2 Laser, Fiber Laser Engraver, CNC Mill., • Understands how to make CNC operations more profitable through material yield and optimum machining feeds and speeds, • Eager to learn new aspects of the facility, • Willingness to mentor and share your knowledge, • High energy and enthusiastic attitude, • High caliber communication and collaboration skills, • Experience in plastics, wood, metal and stone, • Excited to help with other tasks outside of normal day to day responsibilities In-person location at 840 11th Ave San Diego, CA 92101 Available Position Full-time Compensation will be based on Experience. Benefits • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Keywords: CNC Lathes, CNC Mills, CNC Machine Operators, CNC Machinist

UCSD Layoff from Career Appointment: Apply by 5-14-26 for consideration with preference for rehire. All layoff applicants should contact their Employment Advisor. Reassignment Applicants: Eligible Reassignment clients should contact their Disability Counselor for assistance. Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas, which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The Hillcrest Same Day Operating Room will be have multiple services including Orthopedics, Urology, Pain Procedures, IR, ENT, Plastics and Vascular Service lines. This Peri-Operative Services RN will primarily work in the Hillcrest Same Day Operating Rooms but will cross-train to the Main OR. This position is for 12-hour day shifts with weekend, holiday, and call requirements. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. While not required, a cover letter is highly recommended when applying to this position. This opening is for an 8-hour shift, 0930-1800. The schedule details will be discussed with the finalist(s) during the interview stage of this recruitment. This requisition has been slightly modified as of 5-12-26. • Must be a graduate from an accredited school of nursing., • Registered Nurse (RN) license issued by the State of California., • BLS/CPR certification at time of hire with commitment to get BART within six months of hire date., • Minimum of three(3) years inpatient Operating Room (OR) RN circulating and scrubbing and trauma experience., • Must be able to scrub - ENT, GYN, Urology, Plastic, and/or Ortho., • Must possess excellent interpersonal and communication skills., • Must be able to work within a team environment., • BSN, • Charge nurse experience preferred., • Two (2) years of scrub and operating room RN experience including ENT, GYN, Urology, Plastic, Sports Med and Ortho., • Outpatient experience preferred., • Charge nurse experience., • CNOR, • Must be able to work various hours and locations based on business needs., • Must be able to float to Main OR and take call as needed., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $138,330 - $193,892 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $66.25 - $92.86 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas, which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The Hillcrest Same Day Operating Room will be have multiple services including Orthopedics, Urology, Pain Procedures, IR, ENT, Plastics and Vascular Service lines. This Peri-Operative Services RN will primarily work in the Hillcrest Same Day Operating Rooms but will cross-train to the Main OR. This position is for 12-hour day shifts with weekend, holiday, and call requirements. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of nursing., • Registered Nurse (RN) license issued by the State of California., • BLS/CPR certification at time of hire with commitment to get BART within six months of hire date., • Minimum three (3+) years Acute Care Operating Room RN experience., • Minimum three (3+) years Scrub RN experience., • Must be able to scrub - ENT, GYN, Urology, Plastic, and/or Ortho., • Must possess excellent interpersonal and communication skills., • Must be able to work within a team environment., • BSN, • Charge nurse experience preferred., • Main Operating Room in a Trauma Center experience preferred., • CNOR, • Per diem shift requirement is an average of 1 shift per week. Must be available 1 weekend shift every 4 weeks and 1 major holiday. This is subject to change based on department needs., • Must be able to work various hours and locations based on business needs., • Must be able to float to Main OR and take call as needed. Annual Full Pay Range: $190,342 - $190,342 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $91.16 - $91.16 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

UCSD Layoff from Career Appointment: Apply by 5-12-26 for consideration with preference for rehire. All layoff applicants should contact their Employment Advisor. Reassignment Applicants: Eligible Reassignment clients should contact their Disability Counselor for assistance. Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The Registered Nurse provides skilled nursing care to patients undergoing surgical procedures. Hillcrest surgical services includes Trauma, Burn, Neurology, Orthopedics, Urology, Plastics, General, Oncology, Head and Neck, Vascular and Open Heart, Gynecology, as well Interventional Radiology Procedures. This Peri-Anesthesia Registered Nurse will work in both our Pre-Op and PACU in the Hillcrest Same Day Surgery space and the Main Pre-Op/PACU. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of Nursing., • RN license issued by the State of California., • Current ART certification, or BLS/CPR and ACLS certifications at time of hire with commitment to get ART within six (6) months of hire date., • Current PALS certification, or must be obtained during first year of employment., • Must have at least two (2) year of recent Pre-Op/PACU, ICU, or ER RN in an acute care hospital experience., • Must be able to work within a team environment., • Must be able to function in a fast-paced environment, have excellent interpersonal and communication skills, and consistently demonstrate empathy and kindness to all staff and patients., • BSN, • Relevant specialty certification (CCRN, CPAN, CAPA, CEN), • Five (5) or more years of acute care RN experience., • Must be able to work various hours, days, shifts, on-call and various locations based on the 24-hour Medical Center's business needs., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $138,330 - $193,892 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $66.25 - $92.86 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The RN provides skilled nursing care to patients undergoing surgical procedures. UC San Diego Health offers surgical services in Neurology, Orthopedics, Urology, Plastics, General, Oncology, Head and Neck, Vascular and Open Heart, Gynecology. Additional services at Hillcrest include Trauma and Burn surgeries. This RN provides skilled nursing care to patients in the Preoperative Care Center and Perianesthesia Area. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. About the McGrath Outpatient Pavilion: Located in Hillcrest, the McGrath Outpatient Pavilion is a state-of-the-art, 250,000-square-foot medical facility designed to meet the growing healthcare needs of our region. Spanning six floors, this advanced facility is home to key clinical programs and offers specialized diagnostic, treatment, and surgical services. With a strong emphasis on cancer care, we are committed to delivering world-class medical services in a patient-centered environment. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of Nursing., • RN License issued by the State of California., • BLS/CPR and ACLS certification at time of hire with commitment to get ART within six (6) months of hire date., • PALS (must be obtained during 1st year of employment for new employees)., • Must have at least two (2) years of recent acute care ICU or ER nursing experience., • Must possess excellent interpersonal and communication skills., • BSN, • CPAN , CCRN and/or CAPA, • Per diem shift requirement is an average of 1 shift per week. Must be available 1 weekend shift every 4 weeks and 1 major holiday. This is subject to change based on department needs., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $190,342 - $190,342 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $91.16 - $91.16 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas, which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The Hillcrest Same Day Operating Room will be have multiple services including Orthopedics, Urology, Pain Procedures, IR, ENT, Plastics and Vascular Service lines. This Peri-Operative Services RN will primarily work in the Hillcrest Same Day Operating Rooms but will cross-train to the Main OR. This position is for 12-hour day shifts with weekend, holiday, and call requirements. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of nursing., • Registered Nurse (RN) license issued by the State of California., • BLS/CPR certification at time of hire with commitment to get BART within six months of hire date., • Minimum three (3+) years Acute Care Operating Room RN experience., • Minimum three (3+) years Scrub RN experience., • Must be able to scrub - ENT, GYN, Urology, Plastic, and/or Ortho., • Must possess excellent interpersonal and communication skills., • Must be able to work within a team environment., • BSN, • Charge nurse experience preferred., • Main Operating Room in a Trauma Center experience preferred., • CNOR, • Per diem shift requirement is an average of 1 shift per week. Must be available 1 weekend shift every 4 weeks and 1 major holiday. This is subject to change based on department needs., • Must be able to work various hours and locations based on business needs., • Must be able to float to Main OR and take call as needed. Annual Full Pay Range: $190,342 - $190,342 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $91.16 - $91.16 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The RN provides skilled nursing care to patients undergoing surgical procedures. UC San Diego Health offers surgical services in Neurology, Orthopedics, Urology, Plastics, General, Oncology, Head and Neck, Vascular and Open Heart, Gynecology. Additional services at Hillcrest include Trauma and Burn surgeries. This RN provides skilled nursing care to patients in the Preoperative Care Center and Perianesthesia Area. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. About the McGrath Outpatient Pavilion: Located in Hillcrest, the McGrath Outpatient Pavilion is a state-of-the-art, 250,000-square-foot medical facility designed to meet the growing healthcare needs of our region. Spanning six floors, this advanced facility is home to key clinical programs and offers specialized diagnostic, treatment, and surgical services. With a strong emphasis on cancer care, we are committed to delivering world-class medical services in a patient-centered environment. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of Nursing., • RN License issued by the State of California., • BLS/CPR and ACLS certification at time of hire with commitment to get ART within six (6) months of hire date., • PALS (must be obtained during 1st year of employment for new employees)., • Must have at least two (2) years of recent acute care ICU or ER nursing experience., • Must possess excellent interpersonal and communication skills., • BSN, • CPAN , CCRN and/or CAPA, • Per diem shift requirement is an average of 1 shift per week. Must be available 1 weekend shift every 4 weeks and 1 major holiday. This is subject to change based on department needs., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $190,342 - $190,342 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $91.16 - $91.16 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

UCSD Layoff from Career Appointment: Apply by 5-14-26 for consideration with preference for rehire. All layoff applicants should contact their Employment Advisor. Reassignment Applicants: Eligible Reassignment clients should contact their Disability Counselor for assistance. Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas, which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The Hillcrest Same Day Operating Room will be have multiple services including Orthopedics, Urology, Pain Procedures, IR, ENT, Plastics and Vascular Service lines. This Peri-Operative Services RN will primarily work in the Hillcrest Same Day Operating Rooms but will cross-train to the Main OR. This position is for 12-hour day shifts with weekend, holiday, and call requirements. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. While not required, a cover letter is highly recommended when applying to this position. This opening is for an 8-hour shift, 0930-1800. The schedule details will be discussed with the finalist(s) during the interview stage of this recruitment. This requisition has been slightly modified as of 5-12-26. • Must be a graduate from an accredited school of nursing., • Registered Nurse (RN) license issued by the State of California., • BLS/CPR certification at time of hire with commitment to get BART within six months of hire date., • Minimum of three(3) years inpatient Operating Room (OR) RN circulating and scrubbing and trauma experience., • Must be able to scrub - ENT, GYN, Urology, Plastic, and/or Ortho., • Must possess excellent interpersonal and communication skills., • Must be able to work within a team environment., • BSN, • Charge nurse experience preferred., • Two (2) years of scrub and operating room RN experience including ENT, GYN, Urology, Plastic, Sports Med and Ortho., • Outpatient experience preferred., • Charge nurse experience., • CNOR, • Must be able to work various hours and locations based on business needs., • Must be able to float to Main OR and take call as needed., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $138,330 - $193,892 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $66.25 - $92.86 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Current UC San Diego Health CNA (NX) represented RN/NP applicants will be considered after the first 7 days of job posting. All additional applicants will be considered after 14 days of job posting, pending the status of the initial internal CNA (NX) represented applicant pool. UC San Diego Health is a Magnet designated organization, which is a prestigious recognition that applies to only 10% of all U.S. hospitals. Magnet is the "gold standard" for nursing excellence and is based on strengths in five key areas which include transformational leadership, structural empowerment, exemplary professional practice, new knowledge, innovation and improvements and empirical outcomes. UC San Diego Health has held its Magnet status since 2011. The RN provides skilled nursing care to patients undergoing surgical procedures. UC San Diego Health offers surgical services in Neurology, Orthopedics, Urology, Plastics, General, Oncology, Head and Neck, Vascular and Open Heart, Gynecology. Additional services at Hillcrest include Trauma and Burn surgeries. This RN provides skilled nursing care to patients in the Preoperative Care Center and Perianesthesia Area. Autonomous nursing care is the ability of a nurse to assess and provide nursing actions as appropriate for patient care populations based on competence, professional expertise, and knowledge. The nurse is expected to practice autonomously consistent with ANA Standards of Practice and Professional Performance. Independent judgment is expected to be exercised within the context of interdisciplinary and multidisciplinary approaches to patient care. Schedule for this Per Diem opening is Monday-Friday, with weekends included/Rotated, 12 hour shifts, including weekend on call and night cal. While not required, a cover letter is highly recommended when applying to this position. • Must be a graduate from an accredited school of Nursing., • RN License issued by the State of California., • BLS/CPR and ACLS certification at time of hire with commitment to get ART within six (6) months of hire date., • PALS (must be obtained during 1st year of employment for new employees)., • Must have at least two (2) years of recent Preop/PACU, acute care ICU, or ER nursing experience., • Must possess excellent interpersonal and communication skills., • BSN, • CPAN, CCRN and/or CAPA, • Per diem shift requirement is an average of 1 shift per week. Must be available 1 weekend shift every 4 weeks and 1 major holiday. This is subject to change based on department needs., • Employment is subject to a criminal background check and pre-employment physical. Annual Full Pay Range: $190,342 - $190,342 (will be prorated if the appointment percentage is less than 100%) Hourly Equivalent: $91.16 - $91.16 Factors in determining the appropriate compensation for a role include experience, skills, knowledge, abilities, education, licensure and certifications, and other business and organizational needs. The Hiring Pay Scale referenced in the job posting is the budgeted salary or hourly range that the University reasonably expects to pay for this position. The Annual Full Pay Range may be broader than what the University anticipates to pay for this position, based on internal equity, budget, and collective bargaining agreements (when applicable).

Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials.Erects scaffolding and ladders for assembling structures above ground levels.Follows established safety rules and regulations and maintaining

Carpenter Job Duties: Installs foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials. Fits an

Carpenter - Journeyman Job Duties: • Installing foundations, walls, floors, ceilings, and roofs using materials such as: wood, steel, metal, concrete, plastics, and composites of multiple materials • Fitti

Business Development Manager – Recycled Plastics Remote Position – United States About the Business Operating across 3 continents and trading in more than 20 countries, our client is a global leader in recyclable plastics trading and processing. Key Responsibilities Market Research & Business De

Identify and prospect potential opportunities through market research and competitor analysis.Proactively reach out to potential clients to generate leads and schedule sales meetings.Present and demonstrate our products and services to potential clients to highlight the benefits and value propositio

JOB DESCRIPTION: 1 st Shift, 6:30 AM - 3:30pm PST 2 nd Shift,Pay: $26.PM -11:30pm PST Top Skills • Performs a wide variety of electrical and mechanical assembly operations in an engineering or prototyping environment, including wiring, component installation, hand soldering, and cable harnessing o

Lead Key Projects from Specs to Sales Success The Division Project Manager is the driving force behind converting project specifications into sales by coordinating efforts across Account Managers, Field Engineers, Fire Protection Specialists, and Regional Managers.This role leads critical job site m

About Southwest Equity Partners.Since 2006, Southwest Equity Partners has been connecting tenants with multi-family and commercial properties throughout San Diego, California.Each and every day, we exceed both our resident's and client's expectations by embodying our mission statement and living our

Aerotek - - Responsibilities: Pick, pack, sort, arrange, count, store, and process items for storage and/or shipment according to established procedures and customer requirements; Receive materials and/or finished goods daily, ensuring the quality, type, and amount received are correct and document

Covenant Living Communities - - Responsibilities: Complete assigned work requests and assigned preventative maintenance work orders as assigned by supervisor such as, but not limited to auto/small engine mechanics, carpentry, appliance repair, plumbing, electrical, emergency generators, low voltage

American Red Cross - - Responsibilities: Maintain and repair organization's facilities and properties involving routine tasks and responsibilities.Patch minor holes and cracks in walls and ceilings.Repair or replace concrete floors, steps and sidewalks.Paint structures and equipment as needed.Insta

The Shipper/Packer will help ensure sufficient inventory levels while reducing losses and inefficiencies.A Shipper/Packer will perform the below duties in accordance with ASRC Federal ISO certified processes under direct guidance ASRC Federal Site Management personnel and others as assigned.Location

Verstela - - Responsibilities: Lead electronic assembler tasks from blueprint interpretation to final testing and quality assurance.

Internal Audit Manager (Project Delivery).The Internal Audit Manager will lead the development, implementation, and continuous improvement of CRB's internal audit program, with a focus on project delivery processes across our global operations.This role will be responsible for planning and executing

Aerotek - - Responsibilities: Build and validate precision opto-mechanical assemblies strictly following established procedures and standard operating practices; Use standardized tools and electric equipment, including torque wrenches, electric and pneumatic screwdrivers, and ball drivers, to perfo

Responsibilities: Operates production machinery and ensures that quality, consistency, cleanliness, and safety standards are met.

About Southwest Equity Partners.Since 2006, Southwest Equity Partners has been connecting tenants with multi-family and commercial properties throughout San Diego, California.Each and every day, we exceed both our resident's and client's expectations by embodying our mission statement and living our

Sales Associate/Material Handler - Chula Vista Store.Job Category: Thrift Stores - all positions Requisition Number: SALES016525.Location: SD Chula Vista Store 12 Chula Vista, CA 91811, USA.Job Title: Sales Associate/Material Handler.Immediate Supervisor: Store Manager.The Salvation Army Mission Sta

The Salvation Army (Western) - - Responsibilities: Greet customers and donors and provide prompt, courteous assistance; Stock priced items for sale on the sales floor; Sort donations for processing according to standards; Maintain store cleanliness and organization including cleaning tasks; Follow

Aerotek - - Responsibilities: Trim excess rubber from parts to meet quality and dimensional standards; Carefully inspect parts for defects and ensure only acceptable components move forward in the process; Apply glue to grooves and other specified areas of parts using small brushes with precision a

The Salvation Army (Western) - - Responsibilities: Work with store leadership to manage daily thrift store operations and inventory at Point Loma.

Aerotek - - Responsibilities: Operate large production machines, preferably CNC routing machines, according to established procedures and work orders.Use work orders to review job instructions, identify the correct job folder, and select the appropriate program for each task.Position the routing ma

The Salvation Army (Western) - 7425 Otay Mesa Road - Responsibilities: Greet customers and donors, provide prompt, courteous assistance; Stock priced items for sale on the sales floor; Receive, unload, and stock incoming inventory; Inspect products for defects and damages; Maintain store cleanliness

The Salvation Army (Western) - 6875 El Cajon Boulevard - Responsibilities: Greet customers and donors and provide prompt, courteous assistance; Stock priced items on the sales floor in accordance with Salvation Army Standards; Sort donations for processing according to Salvation Army Standards; Main

US Department of Defense - - Responsibilities: Operate conventional and CNC machines to perform machining operations on castings, forgings, or other stock; Follow detailed instructions from blueprints and directives to determine dimensions, feeds/speeds, tools, and processes; Use precision measurin

Location: San Diego California.Performs a variety of operations to assemble mechanical components, sub-assemblies and sheet metal enclosures.Works with assembly prints, wiring diagrams and schematics to assemble drawers, chassis, enclosures and racks.Works on assignments that are complex in nature w

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers' mission and quest for professional growth.L3Harris provides an inclusive, engaging environment designed to empower employ

Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability.These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, o

Sales Associate/Material Handler - College, SD Store.Job Category: Thrift Stores - all positions Requisition Number: SALES009570.SD College Store 3 San Diego, CA 92115, USA.JOB TITLE: SALES ASSOCIATE/MATERIAL HANDLER.IMMEDIATE SUPERVISOR: STORE MANAGER.THE SALVATION ARMY MISSION STATEMENT:.The Salva

Job Title: Electronic Assembler, Senior Shift Hrs: 6:30am - 3:30pm PST Duration: 3 months Location: San Diego CA 92121 Principal Duties and Responsibilities: * Follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on as

Sales Associate/Material Handler - Point Loma.Job Category: Thrift Stores - all positions Requisition Number: SALES023821.Part-Time SD Point Loma Store 16 San Diego, CA 92110, USA.The Salvation Army (TSA) Adult Rehabilitation Center (ARC) is a no-fee program to assist men & women in their journey to

GreyStar - Gravity [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make repairs in acc

JOB DESCRIPTION: 1 st Shift, 6:30 AM - 3:30pm PST 2 nd Shift,Pay: $26.PM -11:30pm PST Top Skills • Performs a wide variety of electrical and mechanical assembly operations in an engineering or prototyping environment, including wiring, component installation, hand soldering, and cable harnessing o