Trabajos plastics en Linden, New JerseyCrear alertas

Job Description Hosokawa provides size reduction systems and powder processing solutions for chemical, pharmaceutical, food, mineral, plastics, and cosmetic applications. Throughout our history, we have led the industry in coarse to ultra-fine grinding, classification, mixing, drying, containment, compaction, and analytical equipment. This position is responsible for assembling in-house manufactured parts and vendor-supplied components into sub-assemblies and finished rotating machinery. The role also includes evaluating and repairing returned equipment. Quality, safety, and accuracy are essential to ensure machinery performs reliably and supports company profitability and customer satisfaction. Essential Duties: • Review work orders and pull required parts from inventory., • Verify all parts, finishes, and paint meet quality plans and customer specifications., • Assemble components to ensure proper fit, alignment, and function., • Test assemblies with engineering support and document results., • Follow safety protocols when handling parts ranging from 1 lb. to several tons., • Meet standard assembly times and on-time delivery goals., • Install bearings using hydraulic presses, induction heaters, and hand tools., • Align direct and belt-drive systems., • Set proper bolt torque and clearances., • Uses cranes, hoists, and lifts safely., • Wire junction boxes and install small control panels as needed. Basic Qualifications: • High School Diploma or GED, • 3+ years' experience installing bearings for high-speed equipment., • 2+ years' experience installing drive components, belts, and couplings, including performing alignments., • Must own standard tools (screwdrivers, Allen wrenches, socket sets - metric & standard, pliers, hammers, mallet, measuring tapes, etc.). Preferred Qualifications: • Experience with light wiring for low and high voltage systems (up to 250 HP, 460/3/60)., • Knowledge of balancing effects on rotating equipment Physical Requirements: • Ability to lift and handle components ranging from 1 lb. to several tons (with proper lifting equipment)., • Ability to stand, bend, and reach for extended periods., • Consistent adherence to safety protocols and use of required PPE. Salary Range: $46,672 - $ 79,318 Salaries will vary and may be above or below this range commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to hr@hmps.hosokawa.com to let us know the nature of your accommodation request and your contact information.

Job Description Position Overview The Night Shift CNC Manager is responsible for leading night shift CNC manufacturing operations to deliver safe, consistent, and efficient production results. This role owns shift performance across safety, quality, delivery, and cost while partnering with the Day Shift CNC Manager, Production, Quality, Maintenance, and other supporting teams to maintain strong operations across shifts. Key Responsibilities • Lead, coach, and develop supervisors, team leads, and production employees across the night shift., • Own night shift CNC production performance, including safety, quality, output, machine uptime, and labor efficiency., • Oversee approximately 10 CNC machines, two edge-banders, and supporting production equipment to meet daily production goals., • Manage staffing, overtime, workflow, and production priorities based on business needs and available capacity., • Monitor equipment downtime and partner with Maintenance to identify root causes, improve machine reliability, and minimize production interruptions., • Address quality issues quickly and work with Quality and Production teams to prevent recurring problems., • Review production data to identify opportunities to increase machine output, improve labor efficiency, and drive continuous improvement., • Provide clear daily shift reporting and maintain strong handoffs with the Day Shift CNC Manager, including performance, downtime, quality concerns, staffing issues, and open priorities.Qualifications, • 5+ years of manufacturing leadership experience, including experience leading supervisors, team leads, and production employees., • Hands-on leadership experience in CNC machining, automated manufacturing, or a high-volume production environment., • Demonstrated ability to improve productivity, reduce equipment downtime, and develop production teams., • Strong communication, decision-making, and problem-solving skills with the ability to lead independently during night shift operations., • Experience using production data and performance measures to identify issues and drive improvements., • Experience in cabinet manufacturing, woodworking, automotive, metal fabrication, or plastics manufacturing preferred., • Lean Manufacturing, Six Sigma, continuous improvement experience, and/or bilingual English/Spanish skills are preferred.

Job Description Night Shift CNC Manager Location: Newark, NJ – Headquarters Schedule: Monday–Thursday, 5:00 PM–3:00 AM Compensation: $100,000-$120,000 Reports to: Director of Production Why This Role Exists We are looking for a strong production leader to take ownership of our night shift. This role is less about being the strongest CNC technician in the building and more about being an effective manager who can lead people, maintain accountability, follow production closely, and make sure the shift operates safely and consistently. You will lead a night-shift team of approximately 10–15 employees in a CNC-focused production environment. What You Will Own • Lead and manage approximately 10–15 night-shift production employees., • Maintain clear expectations around productivity, attendance, safety, quality, and performance., • Follow production throughout the shift and make sure daily output goals are achieved., • Address performance, staffing, workflow, and operational issues as they arise., • Maintain strong safety standards and reinforce safe operating practices., • Ensure quality issues are identified and addressed quickly., • Monitor production equipment and coordinate with Maintenance when downtime or equipment problems occur., • Keep the team focused, productive, and accountable throughout the shift., • Communicate clearly with Production leadership and the day shift regarding output, downtime, staffing, quality concerns, and outstanding issues., • Identify opportunities to improve productivity, workflow, and overall shift performance., • Develop employees and build greater accountability within the team. What Success Looks Like • The night shift consistently meets production expectations., • Employees understand what is expected and are held accountable., • Safety and quality standards are maintained., • Problems are handled quickly rather than left for the following shift., • Production leadership has clear visibility into night-shift performance., • Equipment, staffing, and production issues are escalated appropriately without unnecessary dependence on senior leadership., • The team becomes stronger, more disciplined, and more self-sufficient over time. What You Need • 5+ years of manufacturing, production, or operations leadership experience., • Experience directly managing production employees in a manufacturing environment., • Strong people-management skills with the ability to coach, hold employees accountable, and handle difficult performance situations., • Strong communication, judgment, and problem-solving ability., • Experience managing production goals, quality, safety, staffing, and day-to-day execution., • Ability to independently lead a night-shift operation., • Comfortable working around CNC machinery, automated equipment, or other production equipment. Preferred, Not Required • CNC manufacturing experience., • Cabinet, woodworking, automotive, metal fabrication, plastics, or other high-volume manufacturing experience., • Lean manufacturing or continuous improvement experience., • Bilingual English/Spanish. Email Resume: Joel@maiplacement.com Apply Online: https://jobs.crelate.com/portal/maiplacement/job/z93qi3r4gboxp7pqzzjtmbpd4r Refer a friend and earn up to $1,000 upon a successful placement.

Job DescriptionDescription: • Review architectural drawings, approved millwork shop drawings, specifications, field dimensions, and production requirements before programming., • Create accurate CNC programs for custom architectural millwork, cabinetry, fixtures, wall panels, doors, countertops, and specialty components., • Convert AutoCAD, engineering, and shop-drawing files into machine-ready CNC programs., • Develop optimized cutting patterns and nesting layouts to maximize material yield and minimize waste., • Program routing, drilling, boring, grooving, pocketing, hardware preparation, and edge-profiling operations., • Select the appropriate tooling, cutting speeds, feed rates, machining sequences, and hold-down methods for each material and application., • Program components manufactured from plywood, MDF, particleboard, solid wood, veneer panels, laminate, plastics, composites, and other specialty materials., • Generate clear part labels, cut lists, machining reports, and production documentation., • Verify dimensions, tolerances, grain direction, finished-face orientation, edge-banding requirements, and hardware locations before releasing programs., • Perform program simulations and identify potential collisions, machining conflicts, or design errors before production begins., • Conduct first-piece inspections and make programming adjustments to ensure components meet approved drawings and quality standards., • Troubleshoot CNC programming, tooling, vacuum, material-hold-down, and machining issues in coordination with CNC operators and maintenance personnel., • Work closely with engineering, drafting, project management, estimating, purchasing, and production teams to resolve constructability and manufacturing issues., • Recommend revisions to shop drawings or production methods when designs cannot be manufactured efficiently or safely., • Maintain organized CNC files, program revisions, tooling libraries, material databases, and project folders., • Ensure that only the latest approved drawings and program revisions are released to production., • Track material usage, machining time, rework, and scrap to support accurate job costing and production planning., • Identify opportunities to reduce machining time, material waste, setup time, and manual fabrication., • Develop reusable programs, templates, macros, and manufacturing standards for recurring components and assemblies., • Assist CNC operators with machine setup, tooling changes, spoil-board requirements, fixture preparation, and proper loading procedures, • Coordinate preventative maintenance needs and report machine, tooling, or software issues that may affect production., • Support production scheduling by prioritizing programs according to project deadlines and shop requirements., • Inspect completed parts for dimensional accuracy, machining quality, surface condition, and compliance with project requirements., • Follow Bestmark National’s quality-control procedures, safety policies, and housekeeping standards., • Maintain a clean, organized, and safe programming and CNC work area., • Participate in production meetings and communicate potential delays, material issues, or programming concerns before they affect project schedules., • Train CNC operators and other production personnel on program requirements, setup procedures, tooling, and quality expectations., • Stay current with CNC technology, tooling developments, software updates, and architectural millwork manufacturing practices., • Perform additional programming, engineering, and production-support duties as assigned. Requirements: · 5 years’ minimum experience in the millwork industry · Excellent organizational and time management skills · Excellent oral and written communication · Must be able to work overtime when needed · Highly motivated with the ability to work with minimum supervision

Job Description Hosokawa provides size reduction systems and powder processing solutions for chemical, pharmaceutical, food, mineral, plastics, and cosmetic applications. Throughout our history, we have led the industry in coarse to ultra-fine grinding, classification, mixing, drying, containment, compaction, and analytical equipment. The Sr. CNC Machinist (Lathe) is responsible for all turned machining, both manual and CNC lathe operation. This includes CNC programming for machined parts, tool selection, setup and operation. This position is responsible for the supervision of operators and the running of two CNC lathes with live tooling and manual lathes. Essential Duties • Write and modify G-Code programs to make parts optimally, • Tool selection including optimum cutting tools, speeds and feed rates, • Setup including multi-axis and tight tolerance (to 0.0001"), • Read and understand engineering drawings, • Ability to use inspection tools including calipers and micrometers, • Inspect or provide parts to the QC Inspector for inspection, • Train and support CNC Operators with large quantity runs, • Conduct preventative maintenance on machines, • Maintain a clean and safe work environment Basic Qualifications • High School Diploma, • 5+ years using CNC including programming, tool selection, setup and operation, • 3+ years programming in G-Code, • 3+ years in tooling/cutter selection, • 1+ year supervising operators, • Ability to self-inspect parts and use inspection tools accurately (calipers and micrometers), • Strong mathematical acumen - addition, subtraction, division, multiplication and geometry Preferred Qualifications • 10+ years programming and optimizing programs for tuned parts, • 5+ years with live tooling, • 3+ years with HAAS lathes Physical Requirements • Ability to visually inspect components and accurately read and use inspection tools, with or without reasonable accommodation., • Ability to lift and move materials weighing up to 50 pounds, with or without reasonable accommodation as required to perform the essential functions of the job., • Ability to stand, twist, turn, and /or bend for extended periods, up to 8 hours per workday, as required to perform the essential functions of the position, with or without reasonable accommodation. Salary/Rate Range: · $56,473 -$95,976 Salaries/Rates will vary and may be above or below this rate commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to hr@hmps.hosokawa.com to let us know the nature of your accommodation request and your contact information.

Job Description Hosokawa provides size reduction systems and powder processing solutions for chemical, pharmaceutical, food, mineral, plastics, and cosmetic applications. Throughout our history, we have led the industry in coarse to ultra-fine grinding, classification, mixing, drying, containment, compaction, and analytical equipment. The Application Engineer supports equipment sales and process design across various industry sectors. This role is responsible for supporting the sale of Hosokawa equipment for Size Reduction, Classification, Mixing, Drying, Compaction, and Agglomeration processes. The position reviews customer applications to determine appropriate equipment selection and process design, prepares technical and commercial solutions in the form of quotations, and coordinates customer test trials to validate equipment performance and ensure customer satisfaction. Essential Duties: • Identify and qualify sales leads through calls, emails, meetings, and trade shows., • Review customer specifications and recommend appropriate equipment and process solutions., • Prepare quotations, proposals, and cost estimates using Microsoft Word and Excel., • Coordinate customer trials and testing activities domestically and internationally., • Maintain CRM records, run sales reports, and analyze market trends., • Support marketing with sales materials, exhibitions, and promotional activities., • Perform additional duties as assigned. Basic Qualifications: • Bachelor’s degree in Chemical, Mechanical, or Process Engineering., • 1+ year of experience working with or selling industrial or process equipment., • Experience to communicate technical information clearly to both technical and non-technical audiences., • Experience to develop and present solutions to complex issues in a team environment., • Experience to collaborate with cross-functional teams to exchange technical information., • Basic understanding of Microsoft Office Suite- Excel, Word, and PowerPoint. Preferred Qualifications: • Master's degree in chemical, Mechanical, or Process Engineering., • 3+ years of experience in process equipment sales or applications engineering., • 1+yrs. of experience with a CRM system., • Familiarity with powder processing, containment, or similar systems., • Ability to interpret P&IDs and understand containment or process safety concepts. Physical Requirements: • Domestic and international travel (10%–30%)., • Ability to sit, stand, walk, and occasionally move to 25 lbs. Salary/Rate Range: $68,334 - $116,133 Salaries/Rates will vary and may be above or below this rate commensurate with several factors including experience, education, training, location, and merit. Hosokawa Micron Powder Systems provides equal employment opportunities to applicants and employees without regard to race; color; sex; gender identity; sexual orientation; religious practices and observances; national origin; pregnancy, childbirth, or related medical conditions; status as a protected veteran or spouse/family member of a protected veteran; or disability. Hosokawa Micron Powder Systems is committed to providing reasonable accommodation to, among others, individuals with disabilities and disabled veterans. If you need an accommodation because of a disability to search and apply for a career opportunity with Hosokawa, please send an e-mail to hr@hmps.hosokawa.com to let us know the nature of your accommodation request and your contact information.

Job DescriptionKeep the lines running—power a brand millions trust At Union Beverage Packers, LLC, our maintenance team is the engine behind safe, consistent production. If you’re driven to eliminate downtime, elevate bottle quality, and build a culture of safety and GMP excellence, this role is your next step. Why this role matters Every minute our blow molders, fillers, conveyors, and palletizers operate at peak performance, we deliver for customers and teammates. You’ll collaborate with Production, Quality Control, Sanitation, contractors, and OEMs to keep equipment reliable, changeovers crisp, and start-ups smooth. Schedule and employment • Pay: $25.00–$45.00 per hour, based on experience, • Schedule: All shifts are open; our largest need is on 3rd shift, • Hours: Minimum 48 hours per week, • Job Type: Full-time, • Overtime: Required as needed, • Work Location: In person We’re staffing across shifts and actively prioritizing strong 3rd shift candidates. Your core responsibilities • Own scheduled/unscheduled maintenance for production equipment and plant machinery., • Diagnose and repair issues across mechanical, pneumatic, hydraulic, electrical, plumbing, HVAC, and refrigeration., • Execute preventive and corrective maintenance to extend asset life., • Reduce downtime through fast, accurate troubleshooting and repair., • Support installations, modifications, commissioning, and changeovers., • Read and apply mechanical drawings, schematics, manuals, and technical references., • Conduct daily inspections; promptly communicate major findings to Maintenance leadership., • Provide hands-on support for blow molders, fillers, conveyors, palletizers, and packaging systems., • Open/close work orders and maintain precise records of work performed., • Respond effectively during breakdowns and high-pressure scenarios., • Model safety, GMP, food safety, quality, sanitation, and company policies., • Keep the work environment clean, organized, and safe. Specialized Sidel impact (if you have it), • Operate, monitor, adjust, and troubleshoot Sidel blow molding equipment., • Lead changeovers, start-ups, fine-tuning, and major mechanical interventions., • Maintain platforms like SBO, Matrix, Universal, Series 2, or similar lines., • Resolve mechanical/pneumatic/hydraulic and basic electrical issues on Sidel machines., • Partner with QC to verify bottle conformance to standards., • Advance bottle quality initiatives, process improvements, and downtime reduction., • Clean, sanitize, and maintain blow molding and adjacent production equipment. What you bring, • High school diploma or equivalent., • Industrial maintenance or related mechanical/manufacturing equipment background., • Sharp troubleshooting skills and a bias for action., • Independence and urgency when equipment issues arise., • Ability to commit to at least 48 hours per week and work overtime/weekends/holidays as needed., • Safe work habits around moving production machinery., • Physical capability to stand, walk, bend, kneel, climb, push, and pull., • Lift at least 50 pounds., • Comfort with warm, loud, wet, fast‑paced environments., • Willingness to wear all required PPE. Experience that sets you apart, • Direct work on Sidel blow molding equipment., • Time in beverage, bottled water, soft drink, food manufacturing, plastics, PET packaging, or bottling., • Hands‑on with fillers, conveyors, palletizers, blow molders, and packaging machinery., • Skills in electrical, welding, plumbing, HVAC, refrigeration, or equipment installation., • Familiarity with PLCs and automated production systems., • Track record of major rebuilds or equipment overhauls., • Experience as a Sidel Field Service Engineer or Service Technician., • Forklift/equipment certifications., • Basic computer literacy for work orders and maintenance documentation. Physical and safety expectations, • Lift up to 50 pounds regularly; use assistance/equipment for heavier items., • Stand and walk for long durations., • Bend, reach, kneel, climb, push, and pull as part of daily work., • Operate near moving equipment; work in wet, noisy, and hot areas., • Follow all safety procedures and PPE requirements. Compensation and benefits, • Competitive pay from $25.00 to $40.00 per hour, • Overtime opportunities, • Medical insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid time off, • Paid holidays, • 401(k), • 401(k) matching, • Training and growth opportunities Benefits may be subject to eligibility requirements. Ready to apply? Please answer: • Which shift are you available to work?, • Are you able to work at least 48 hours per week and overtime when required?, • How many years of industrial maintenance experience do you have?, • What production or manufacturing equipment have you repaired?, • Do you have beverage, bottling, food manufacturing, plastics, or packaging experience?, • Have you worked on Sidel blow molding equipment?, • Which Sidel models have you worked on?, • Can you troubleshoot mechanical, pneumatic, hydraulic, and basic electrical problems?, • What major machine repairs or equipment overhauls have you completed?, • Are you comfortable working in a fast-paced beverage manufacturing environment? Equal Opportunity Employer Union Beverage Packers, LLC is an Equal Opportunity Employer. We are committed to providing a safe, respectful, and professional workplace for all employees. Skills snapshot • Creating Preventive Maintenance Plans, • Mechanical Troubleshooting Skills, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • CNC Machine Setup & Changeover, • Industrial Electrical Systems, • Mechanical Systems & Component Repair, • DOT & Equipment Inspection Compliance, • Lockout/Tagout (LOTO), • Equipment Repair & Maintenance, • Automotive Manufacturing Systems, • Automotive Repair & Service Systems, • Machine Safety Inspections

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic/Vacforming/Thermo Forming machine set up to join our maintenance team and help keep our production running smoothly. Responsibilities: Troubleshoot, maintain, and repair plastic processing machinery and equipment Perform preventative maintenance on machines to ensure optimal performance Assist with equipment setup, changeovers, and calibration Maintain maintenance logs and records Ensure safety standards are followed at all times Requirements: Mechanical experience in an industrial or manufacturing setting Familiarity with plastic processing equipment is a plus Strong problem-solving skills Ability to work independently and as part of a team Must be reliable and safety-conscious

For any concerns relating to Republic Services’ commitment to equal opportunity employment, you may contact the AWARE Line at 1-866-3-AWARE-4. EEO STATEMENT:Republic Services is an equal opportunity employer. The Republic Services Polymer Center is the nation’s first integrated plastics recyclin

Pay: $36.75/hour Department: Surgery Schedule: Full-Time, Days The Operating Room Technician (OR Tech) prepares sterile instruments, supplies, and equipment for surgical procedures, maintains the sterile field, and provides intraoperative support to surgeons and the surgical team. This role ensures patient safety, infection prevention, and efficient operating room workflow. • Prepare and organize sterile instruments, supplies, and equipment for surgical procedures., • Establish and maintain a sterile field throughout assigned cases., • Pass instruments, supplies, and equipment to surgeons during procedures., • Perform surgical counts according to patient safety protocols., • Inspect instruments and equipment to ensure cleanliness, functionality, and sterility., • Assist with operating room setup and turnover between cases., • Adhere to infection control, safety, and regulatory standards., • Collaborate with surgeons, nurses, anesthesia providers, and other perioperative staff., • Support emergency and urgent surgical procedures as needed., • Maintain accurate documentation related to surgical supplies and instruments. Education and Work Experience Must be a cardiac surgical technician with experience in open heart surgery. High School Diploma or Equivalent or related experience required for new hires effective April 2014. Graduate of an ORT training program or on the job training with a minimum of 3 years experience (surgical setting preferred). Experience in scrubbing minor and major procedures in the generalized surgical specialties, (i.e., GYN, General and Plastics). Experience in scrubbing at least minor procedures in the specialty surgical areas (i.e., ortho, neuro, ENT, Uro. Etc.). Current BLS (AHA) certificate upon hire and maintain current. Join an award-winning team of dedicated professionals committed to our core values of quality, compassion and community! Saint Michael's Medical Center, a member of Prime Healthcare, offers incredible opportunities to expand your horizons and be part of a community dedicated to making a difference. Established by the Franciscan Sisters of the Poor in 1867, Saint Michael's Medical Center is a 358-bed regional tertiary-care, teaching, and research center in the heart of Newark's business and educational district and is accredited by The Joint Commission. Combining state-of-the-art technology, the latest diagnostic and therapeutic procedures, leading-edge research, and a network of highly qualified physicians, nurses, and allied health professionals, the hospital provides top-quality health care services delivered with compassionate care. The first medical institution in New Jersey to perform open-heart surgery, and the first to develop a cardiac catheterization program, Saint Michael's Medical Center is home to the Heart and Vascular Institute, which offers a comprehensive array of innovative cardiac treatments and procedures. Learn more at www.smmcnj.com. Saint Michaels Medical Center offers competitive compensation and a comprehensive benefits package that provides employees the flexibility to tailor benefits according to their individual needs. Our Total Rewards package includes, but is not limited to, paid time off, a 401K retirement plan, medical, dental, and vision coverage, tuition reimbursement, and many more voluntary benefit options. Benefits may vary based on collective bargaining agreement requirements and/or the employment status, i.e. full-time or part-time. The current compensation range for this role is $36.75. The exact starting compensation to be offered will be determined at the time of selecting an applicant for hire, in which a wide range of factors will be considered, including but not limited to, skillset, years of applicable experience, education, credentials and licensure. Full Time Days Company is an equal employment opportunity employer. Company prohibits discrimination against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (subject to applicable law), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. The Company also prohibits harassment of applicants or employees based on any of these protected categories. Know Your Rights: https://www.eeoc.gov/sites/default/files/2022-10/EEOCKnowYourRightsscreenreader10_20.pdf

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ \nCompany Description New Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.com New Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

This global leadership role will shape procurement strategy across direct materials, indirect services and capital investment, covering categories such as plastics, printed circuit board assemblies, microchips, electronic components, metals, external manufacturing and other technology solutions supp

The Night Shift CNC Manager is responsible for leading night shift CNC manufacturing operations to deliver safe, consistent, and efficient production results. This role owns shift performance across safety, quality, delivery, and cost while partnering with the Day Shift CNC Manager, Production, Quality, Maintenance, and other supporting teams to maintain strong operations across shifts. • Lead, coach, and develop supervisors, team leads, and production employees across the night shift., • Own night shift CNC production performance, including safety, quality, output, machine uptime, and labor efficiency., • Oversee approximately 10 CNC machines, two edge-banders, and supporting production equipment to meet daily production goals., • Manage staffing, overtime, workflow, and production priorities based on business needs and available capacity., • Monitor equipment downtime and partner with Maintenance to identify root causes, improve machine reliability, and minimize production interruptions., • Address quality issues quickly and work with Quality and Production teams to prevent recurring problems., • Review production data to identify opportunities to increase machine output, improve labor efficiency, and drive continuous improvement., • Provide clear daily shift reporting and maintain strong handoffs with the Day Shift CNC Manager, including performance, downtime, quality concerns, staffing issues, and open priorities., • 5+ years of manufacturing leadership experience, including experience leading supervisors, team leads, and production employees., • Hands-on leadership experience in CNC machining, automated manufacturing, or a high-volume production environment., • Demonstrated ability to improve productivity, reduce equipment downtime, and develop production teams., • Strong communication, decision-making, and problem-solving skills with the ability to lead independently during night shift operations., • Experience using production data and performance measures to identify issues and drive improvements., • Experience in cabinet manufacturing, woodworking, automotive, metal fabrication, or plastics manufacturing preferred., • Lean Manufacturing, Six Sigma, continuous improvement experience, and/or bilingual English/Spanish skills are preferred.

This global leadership role will shape procurement strategy across direct materials, indirect services and capital investment, covering categories such as plastics, printed circuit board assemblies, microchips, electronic components, metals, external manufacturing and other technology solutions supp

Job Description A Masterbatch Sales Representative is a technical business-to-business (B2B) sales professional who sells concentrated colorants and additive mixtures to plastics manufacturers, processors, and converters. These roles are typically field-based or remote positions listed across employment platforms like SalesJobs.com. [1, 2, 3] Core Responsibilities • Strategy Execution: Develop and execute regional sales plans targeting plastics manufacturers and compounders., • Relationship Management: Build long-term trust with plant production teams, engineering leadership, and purchasing departments., • Technical Support: Coordinate product sampling, lab testing, and on-site field trials with internal technical teams., • Pipeline Tracking: Manage daily activity reporting and account data using CRM (Customer Relationship Management) platforms like Salesforce., • Travel: Travel frequently within an assigned regional territory for in-person plant visits and industry events. [1, 2] Key Skills & Requirements • Experience: 2 to 3+ years of B2B sales background in masterbatch, colorants, additives, or polymer chemistry., • Technical Aptitude: Comfort navigating long, complex technical sales cycles that can range from two months to two years., • Communication: Ability to engage effectively with R&D labs, quality control departments, and procurement managers., • Independence: Strong self-motivation to manage a remote, field-based territory

Sligan Plastics - - Responsibilities: Operates manufacturing equipment to maximize productivity; Completes traceability and production reports; Maintains production line quality and safety; Documents quality requirements; Communicates clearly with team members.

Project Manager, Developer Marketing.The ideal candidate will bring strong project management discipline, experience managing multiple concurrent workstreams, and a track record of keeping complex marketing projects on schedule, aligned, and delivered to a high standard.Location: Bay Area, CA(Remote

Sligan Plastics - - Responsibilities: Operate and maintain CNC grinders, lathes, Bridgeport mills, welders, plasma cutters; Perform tool and die machining using blueprints and precision measuring instruments; Troubleshoot and repair gearboxes, pumps, and production equipment; Refurbish and rebuild

Dedicated to making a difference in law enforcement agencies across the U.Driven by data science and powered by machine learning, our offering analyzes officer performance data in order to identify potentially problematic behavior.In partnership with the University of Chicago, we’ve developed the

Sligan Plastics - - Responsibilities: Operate and maintain can lines; perform and document quality checks and measurements; diagnose mechanical and quality problems and determine repairs; restore malfunctioning equipment to service with minimum delay; maintain work area and equipment in a clean and

At Swyfft, we're reshaping the way home insurance and commercial package products are priced and bound.We've created an insurance experience that's smart, instant, and designed to deliver unparalleled customer service.Our focus on lightning-fast quotes and seamless claims servicing is powered by cut

We offer you the opportunity to put your passion and your God given talents and abilities to use.Our goal is to attract and develop skilled, called, and passionate people to impact our devoted customers and our team.We want to attract immensely creative employees with an ability to inspire, motivate

Synergy Business Innovation & Solutions is a premier implementer of cutting-edge software solutions.Synergy brings the experience and expertise necessary to deliver capability that provides tangible ROI to our customers.Our core areas of expertise are in the fields of Digital Transformation, Cloud S

Founded in 1952 and formerly known as Heery International Inc.United States as part of Turner & Townsend.It specializes in project and program management for public sector organizations, with industry-leading experts in corporate, cultural, healthcare, justice, sports, K-12 education, higher educati

PROMAN Staffing - - Responsibilities: Unload inbound trailers and load outbound shipments; Transfer materials to designated racks and complete picks; Inspect cargo and verify pallet stability; Perform pre-shift inspections and report maintenance issues; Assist with cycle counts and warehouse housek

Abacus Corporation - - Responsibilities: Receive and process incoming stock and materials, ensuring accurate documentation and organization; Pick and fill orders from stock, adhering to customer specifications and company standards; Pack and ship orders efficiently, maintaining product integrity; M

PrideStaff - - Responsibilities: Assemble warehouse components and prepare orders during the 3rd shift.

Abacus Corporation - - Responsibilities: Safely operate material handling equipment to move products and materials throughout the warehouse; Load and unload trailers efficiently and accurately; Perform put-away, replenishment, and inventory movement tasks; Pick orders using RF scanners and warehous

UNFI - - Responsibilities: Pack bags into master cases accurately; Maintain packaging quality and labels; Ensure GMP and SQF compliance; Load hopper with raw products; Keep packing area clean.

Abacus Corporation - - Responsibilities: Operate High-Reach, Cherry Picker, and Sit-Down Electric Forklifts safely and efficiently; Pick and move orders using a scanner; Assist with inventory-related tasks; Load, unload, and organize warehouse materials; Follow all safety procedures and warehouse g

ProLogistix - - Responsibilities: Pick and pack orders using RF scanner and forklift; Load and unload trailers with forklift; Housekeeping duties; Operate forklift and warehouse equipment; Other duties as assigned.

PrideStaff - - Responsibilities: Assist with daily warehouse tasks and ensure timely order processing with a collaborative team.

Cardinal Health - - Responsibilities: Process orders per SOPs including picking and packing; Operate material handling equipment; Use Warehouse Management System (WMS); Maintain safety and housekeeping; Cross-train in multiple warehouse areas.

Aerotek - - Responsibilities: Inspect packages for defects and inaccuracies; Rework packaging issues to meet quality standards; Assemble kits according to instructions; Prepare products for distribution with accurate labeling; Maintain clean and safe work area.

UNFI - - Responsibilities: Move products with forklift safely; Inspect forklift and report issues; Replenish pick slots and perform replenishments; Log inventory discrepancies; Maintain clean, organized workspace.

JobID: J3T3026S839TFRF0WNP [Material Handler / Freight Handler] As a Warehouse Associate at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers by using a forklift, pallet jack or by hand; Learn all aspects of receiving, unloading and loading operations.

PROMAN Staffing - 84 Veronica Avenue - Responsibilities: Palletizing — stack and secure products for safe, efficient handling; Labeling — accurately label pallets and packages per shipping requirements; Staging — prepare and organize orders for timely dispatch; Forklift Operation — operate s

UNFI - - Responsibilities: _load hopper with raw products to start production; adhere to GMPs and safe work practices; report safety/quality concerns to supervisor; communicate shift information during handoffs; stack pallets and load box feeder.

OnTrac - 130 Central Avenue - Responsibilities: Unload trailers and sort packages by zip codes; Load trucks for deliveries; Maintain safety and quality standards; Be a team player – everyone works together to get the job done; Stay on your feet in heat and cold conditions.

UNFI - - Responsibilities: Load raw materials into Hopper to feed production; Operate/assist with loading equipment and pallets; Maintain safe work practices and food safety compliance (HACCP/SQF); Maintain cleanliness and sanitation of production area; Assist with packing and other duties as assig

Mauser Packaging Solutions - - Responsibilities: Assemble reconditioned products per procedures; Meet production standards within required time; Maintain clean work areas; Follow safety specifications and quality standards; Notify lead or supervisor when stepping off line.

Mauser Packaging Solutions - - Responsibilities: Assemble reconditioned products per procedures; Meet production standards within required time; Maintain clean, safe work areas; Notify supervisor when stepping off line; Report production waste and issues.

Cintas Corporation - - Responsibilities: Drive company trucks to loading areas for unloading of soiled products; Load clean uniforms, floor mats, and customer products onto trucks; Maintain cleanliness of work area; Meet or exceed loading/unloading quantity/quality standards; Follow safety and atte

PrideStaff - - Responsibilities: Pack products for production; Inspect products for quality; Stack and organize materials; Maintain a clean and safe work area; Follow safety and production procedures.

Post Holdings - - Responsibilities: Operate stand-up and sit-down forklifts; Load/unload and move finished goods; Perform FIFO inventory procedures; Conduct basic quality inspections; Maintain inventory accuracy.

Aerotek - - Responsibilities: Read electrical and mechanical drawings; Perform wiring and switchgear assembly; Work to production schedule independently; Collaborate with shop leads on progress; Direct others in assembly tasks.

Abacus Corporation - - Responsibilities: Pick, pack, and sort products accurately according to customer orders; Load and unload trucks and containers; Receive, inspect, and store incoming merchandise; Label, scan, and prepare shipments for distribution; Maintain inventory accuracy using RF scanners

Aerotek - - Responsibilities: Bend plastic PVC piping; Package PVC piping for shipment; Trim excess plastic from PVC piping; Support general production and assembly tasks; Lift up to 20 pounds.